DMS-100 Owner`s Manual
Owner’s Manual
DMS-100
Single Zone Amplifier
DMS-100 Owner’s Manual ©2010-2013 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent
from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.
The information in this Owner’s Manual may be subject to change without prior
notice.
Total Control is a registered trademark of Universal Remote Control, Inc.
URC - Control the Experience is a registered trademark of Universal Remote
Control, Inc.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
Universal Remote Control,Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF CONTENTS
Congratulations!
1
Features and Benefits
2
Parts Guide
2
Front Panel Description
3
System Features
4
Rear Panel Description
5
System Features
6
Important Safety Instructions
7
Federal Communication Commission
9
Interference Statement
9
Limited Warranty Statement
10
End User Agreement
12
Specifications
13
System Configuration for Internal LAN Networks
14
Europe Certification of Conformity
15
Page 1
DMS-100 SINGLE ZONE AMPLIFIER
Congratulations!
You’ve purchased the finest music distribution system available
today. The DMS-100 is a native to the network, CD quality digital
music distribution system with an available range of keypads and
remote controls that not only fully control your music but control
all of your other audio video components.
The DMS-100 distributes music to your speakers and other DMS
components in the system. This makes your system scalable, and
easy to add additional rooms at any time in the future. All you need
is a DMS amplifier connected to the network to make any room a
new DMS Music Room.
The DMS-100 is designed for professional installation only.
Your installer will help you select the right user interface for every
room of your installation. You’ll have a choice of Total Control inwall keypads and remote controls.
If you have questions, call your installer:
Company:
Installer Name:
Contact #:
Email address:
The customer service center is also available for any questions
you may have. Contact us at:
1-914-835-4484
or email us at:
[email protected]
Page 2
DMS-100 SINGLE ZONE AMPLIFIER
Features and Benefits
• One audio input streams to other Total Control amplifiers.
• Preamp output for connection to local amplifier.
• Scalable solution; install as an additional zone with a
DMS-1200 system, or install multiple DMS-100s to create
customized multi-zone system.
• 50 Watts per channel amplifier for speakers.
• Can be programmed off premises via the internet and
MRX-10.
Parts Guide
The DMS-100 Single Zone Amplifier includes:
1 - DMS-100 Single Zone Amplifier
1 - Ethernet Cable
Page 3
1 - Power Cord
1 - Installation Manual
DMS-100 SINGLE ZONE AMPLIFIER
Front Panel Description
Power and LAN LEDs
LEDs indicate that the DMS-100 is connected to
power and to the local area network.
Automatic Power Off
The DMS-100 is powered off and is in an automatic
stand by state when no zones are active.
Reset Button
The front panel reset button offers the end user a quick way to
reconnect the DMS-100 to the local area network.
Page 4
DMS-100 SINGLE ZONE AMPLIFIER
System Features
Pristine Audio Quality
Unlike other digital music systems, the DMS system streams
all music uncompressed at pure CD quality levels. You enjoy all
the detail of your original source.
Room Linking
Any room can be linked with any other room to listen to the same
source. This makes it easy for you to entertain by simply linking all
the rooms your guests will be in and controlling the music from any
remote or keypad.
Reliability
The DMS-100 is engineered first and foremost for reliability.
It offers extensive internal protection against failure and is manufactured in our ISO 9000 certified factory with the utmost attention to
quality control at every stage of manufacturing, from parts procurement to final assembly.
Page 5
DMS-100 SINGLE ZONE AMPLIFIER
Rear Panel Description
100V-220V Power Connection
The IEC power socket enables either UL/CSA approved
110V power cords or CE approved 220V power cables to
be used with the DMS-100. The internal power supply
automatically switches from 100V to 240V.
Network Connection
A 10/100 LAN connection ensures that the DMS-100 will
receive all network streams from other DMS or SNP sources.
IR In for 1-Way RF Remotes and Base Stations
When connected to a URC RF base station, a one-way URC
remote control can be programmed to control a zone.
Page 6
DMS-100 SINGLE ZONE AMPLIFIER
System Features
Analog Audio Input
Connect a music source to the DMS-100 to listen locally to
an AV receiver.
Preamp Zone
The preamp zone enables use of external power amplifiers
for a room with a need for more or less power than 50
watts per channel.
Speakers
The DMS-100 internal amplifier powers a pair of 8 ohm
speakers with 50 watts per speaker. The speakers can deliver
output from any DMS source.
Page 7
IMPORTANT SAFETY
INSTRUCTIONS
Important Safety Instructions
This unit shall be connected to a mains socket outlet with a protective
grounded connection or equivalent.
CAUTION:
To completely disconnect this product from the mains, disconnect the
plug from the wall socket outlet. The mains plug is used to completely
interrupt the power supply to the unit and must be within easy access
by the user.
CAUTION:
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do
so or equivalent.
Page 8
IMPORTANT SAFETY
INSTRUCTIONS
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
In the event of malfunction, un plug lmmediately.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally,or has been dropped.
CAUTION:
l The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
l No naked flame sources, such as lighted candles, should be
placed on the unit.
l Minimum distances around the apparatus for sufficient
ventilation : 20centimeter
l This product is use in moderate climates.
l Do not expose the unit to dripping or splashing fluids, do not
place objects filled with liquids, such as vases, on the unit.
Page 9
DMS-100 SINGLE ZONE AMPLIFIER
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one more of the
following measures:
u Reorient or relocate the receiving antenna.
u Increase the separation between the equipment and receiver.
u Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
u Consult the dealer or an experienced radio/TV technician for
help.
Warning!
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user's authority to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment.
Page 10
WARRANTY
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (“URC”) warrants that the URC equipment
shall be free from defects in material and workmanship under normal usage for
one (1) year from purchase when such is purchased from URC. This limited
warranty is valid only in the United States of America. URC warrants that the
software will substantially conform in any material respect to its functional
specifications at the time of delivery. URC SHALL NOT BE LIABLE FOR
OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR
OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR
THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the URC
software complied with all applicable regulations and policies of the Federal
Communications Commissions (“FCC”) regarding electromagnetic interference
caused by electronic/computing devices and to the extent that the URC
equipment and/or the URC software fails to so comply, URC shall, at its own
expense, take all reasonable measures to promptly cause such to comply.
URC equipment purchases from other than an authorized URC dealer or
distributor are without warranty.
THIS LIMITED WARRANT DOES NOT COVER TECHNICAL ASSISTANCE
FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY
PROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE AND
DOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANY
WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC
EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URC
DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE
USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES
ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,
STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE
Page 11
WARRANTY
SKILL AND CARE, OR OUTCOME OR RESULTS.
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER
PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE
FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS,
(III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE
WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY
CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end user
in whole or in part, where such are restricted or excluded by applicable law
and such shall apply to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the URC
equipment using new or comparable rebuilt parts, or exchange the URC
equipment for new or rebuilt equipment. In the event of a defect, these are
the end user’s exclusive remedies.
All the URC equipment returned for service, exchange or repair require an
RGA number. To obtain an RGA number, you must complete a Return
Request Form which you may obtain by calling (914) 835-4484 or contacting
URC at [email protected] To obtain warranty service, end
user must deliver the URC equipment, freight prepaid, in its original packaging
or packaging affording adequate protection to URC at 420 Columbus Avenue,
Valhalla, NY 10595. It is end user’s responsibility to backup any macro
programming, artwork, software or other materials that may have been
programmed into the unit. It is likely that such data, software, or other materials
will be lost during service and URC will not be responsible for any such
damage or loss. A dated purchase receipt, bill of sale, installation contract or
other verifiable proof of purchase is required. For the URC equipment support
and other important information, please visit URC's website available at
www.universalremote.com or call the Customer Service Center at (914) 8354484.
This limited warranty only covers the URC equipment issues caused by defects
in material or workmanship during ordinary consumer use. It does not cover
product issues caused by any other reason, including but not limited to
product issues due to commercial use, acts of God, third-party installation,
misuse, limitations of technology, or modification of or to any part of the URC
equipment. This limited warranty does not cover the URC equipment sold as
used, as is, refurbished, so called "B stock" or consumables (such as batteries).
This limited warranty is invalid if the factory applied serial number has been
altered or removed from the URC equipment. This limited warranty
specifically excludes the URC equipment sold by unauthorized resellers.
Page 12
WARRANTY
With the exception of URC’s IR-only, broad-based consumer remotes, none of
URC’s PC programmable remotes or any of our Total Control® whole-house
equipment are authorized for online internet sales. Buying URC’s PC
programmable remotes or any of our Total Control® whole-house equipment
online means buying equipment that does not have a URC’s limited warranty.
Such equipment is not eligible for URC tech support or software support,
either.
2. URC’S Limitations of Liability
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,
INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES
OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,
EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO
DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL
BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS
PAID BY END USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF
END USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN
WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR
EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE
BY OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL
RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement available at
www.universalremote.com/eua.php shall apply.
Page 13
SPECIFICATIONS
Specifications
Network
One 10/100 Ethernet port
(Indicator Two LED)
IR One Way & IP Two Way
Control:
Yes
Indicators:
One Power Blue LED - Blink
when resetting/One Network
Blue LED indicator
Zones of Stereo Audio:
One (preamp and speaker
output are linked)
Rated Wattage per Channel:
50 watts per channel at 8
ohms, stable to 4 ohms
Automatic Low Volume
Loudness Compensation:
Installer configured for type
and size of audio zone
Installer Configured EQ:
Bass Boost, Treble Boost,
5-Band parametric EQ
Input Sensitivity:
600~2200mVp-p / 10Kohm
User Adjustable
Audio Controls:
Bass, Treble and Balance
Receives all SNP and DMS
Generated Streams:
Yes
Inputs:
One Stereo Line input streams
to all other DMS Amplifiers
Preamp Output:
Yes, configurable to Fixed Line
Level Output
Power Supply:
AC 100-240V, 50/60Hz
Power Consumption:
175Wmax
Maximum external
Dimensions:
1.7” x 17” x 8.7” (H X W X D)
Weight:
7lbs (3.2Kg)
Page 14
DMS-100 SYSTEM CONFIGURATION
System Configuration for Internal LAN Network
Cable Modem
Internet
WiFi Router
MFS-8
DMS-100
PC
Follow the steps below to connect a DMS-100 to a LAN network.
1. Connect the Internet to the coaxial CABLE port in the rear of the
cable modem.
2. Plug in a RJ-45 ethernet connector cable via the Ethernet port of
the cable modem to the WAN port of the Router.
3. Connect a second RJ-45 cable to a LAN port of the Router and
plug the other end to the LAN 10/100 port on the rear of the
MFS-8/MFSPOE-8 network Switch.
4. Connect a third RJ-45 cable to connect the DMS-100 LAN port to
one of the eight 10/100 Smart ports.
5. Plug the power supply to the DMS-100 and then plug it in to an
unswitched AC outlet.
6. Connect a PC computer to the same LAN as the DMS-100 or plug
an ethernet cable directly to the LAN port of the DMS-100. Now
the computer can control and adjust the manufacturer’s audio
control program.
l
l
l
l
Select audio INPUT source and OUTPUT zone, MAC address etc.
This function selects input source channel and INPUT gain level
and data sent to audio equipment.
After selecting the output zone, adjust the zone limit power rate and
zone power ON/OFF and source signal INPUT channel.
Adjust the amplifier volume level per each zone for proper sound
output and maximum limitation volume level.
Turn on the ramp up volume level and adjust the equalizer repertory
and low volume loudness control effectiveness and custom equalizer align.
Page 15
EUROPE CERTIFICATE OF CONFORMITY
Europe Certificate Of Conformity
Universal Remote Control, Inc. declares that this product complies with
the requirements CE/LVD (Low Voltage Directive, 2006/95/EC).
Certificated Attestation of compliance “E8N 10 10 75224 001” is issued
according to the Directive 2004/108/EC relating to electromagnetic
compatibility on a voluntary basis and is in compliance with the corresponding technical standards such as EN55013, EN55020, EN55022,
EN55024/A2, EN61000-3-2, EN61000-3-3 and EN60065 A/V. A copy
of the full Certificate of Conformance may be obtained at
“http://www.universalremote.com”
Page 16
Page 16
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0099C Rev 03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement