Knьrr® IT Special Catalog
Status 05/2016
Knürr® IT Special Catalog
Networks & Data Centers
A division of the Emerson Group, Emerson Network Power, is a global company that combines
technology and design to offer their customers innovative and effective solutions.
Emerson Network Power protects and optimizes infrastructures for data centers, communication
networks, the health sector and industrial systems.
With its comprehensive technology base and global know-how, Emerson Network Power supports
a broad range of company-level solutions that constitute one of the most important requirements
for today's business.
No company, irrespective of its
size, can afford a failure of its
critical business systems or time
losses incurred when IT infrastructures have to be restored
following a downtime.
Leave the work to us: we are
experts for all types of systems,
from the supply network to the
chip, and can deliver tailored
solutions for both very large and
small data centers.
Emerson Network Power endorses
the European Code of Conduct
for Energy Efficiency in Data Center.
High-level standardization
ensuring that the installation
won't cost you any extra.
Our solutions are user-friendly:
You needn't be an expert to
find the best option for your
company. Furthermore, we offer
comprehensive support so that
you have full protection while
you go about your business.
Emerson Network Power –
For greater Energy Efficiency in your IT Environment
Really reliable availability of businesscritical networks requires a network
infrastructure installation you can
fully depend on, administration and
continuous support.
This in turn depends on the power
supply and cooling infrastructure
supporting these systems and is based
on the following key components:
– Business-critical power supply
– Business-critical cooling
– Rack and enclosure systems
– Monitoring and management
– Proactive maintenance
Emerson Network Power has developed new power-supply-, cooling-,
rack- and enclosure systems, as well as
monitoring solutions which further
support uninterrupted availability –
and offer real added value that goes
well beyond the sum of the individual
solutions.
With our solutions we provide unsurpassed adaptability, individualization
and the ability to integrate into the
most diverse products and services.
We acquire extensive knowledge of
the challenges you face and are in a
position to meet your requirements.
Our exceptionally reliable and com­
prehensive solutions are tailored to
your requirements – thereby providing the benefit of optimized strategic
and operational efficiency enhanced
reliability, higher flexibility and lower
overall operating costs.
Drawing on the combined use of our
knowledge, our experience and our
resources, we deliver a demand-driven
solution from a single source.
The result: an infrastructure that
stays abreast of current and future
requirements.
Ensuring high availability of
mission-critical data and applications.
About Emerson Network Power
Emerson Network Power, a business of Emerson (NYSE:EMR),
is the world’s leading provider of critical infrastructure
technologies and life cycle services for information and
communications technology systems. With an expansive
portfolio of intelligent, rapidly deployable hardware and
software solutions for power, thermal and infrastructure
management, Emerson Network Power enables efficient,
highly-available networks. Learn more at
www.EmersonNetworkPower.com
Sites
Emerson Network Power
Global Headquarters
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229, USA
T +1 614 8880246
Emerson Network Power
Europe Middle East And Africa
Mariakirchener Straße 38
94424 Arnstorf
Germany
T +49 8723 27 0
F +49 8723 27 154
[email protected]
Emerson Network Power
United Kingdom
George Curl Way
Southampton
SO18 2RY, UK
T +44 (0)23 8061 0311
F +44(0)23 8061 0852
[email protected]
Although all appropriate care was taken to ensure that the information in this brochure
is correct and complete, Emerson does not accept responsibility for its contents and
rejects any claims for liability for damages occurring as a result of use of the printed
information, nor does it accept responsibility for errors or omissions.
Technical data may change without prior notice.
Visit our website for more
contact details in EMEA:
www.EmersonNetworkPower.eu
1101.150.110
MKA4CATOUKIT
EmersonNetworkPower.eu
Follow us on:
Emerson. Consider it Solved, LIFE, Trellis, Emerson Network Power and the Emerson Network Power logo are registered trademarks or service marks of Emerson Electric Co. or of one of its affiliated
companies. ©2016 Emerson Electric Co. All rights reserved.
Emerson Network Power
Table of Contents
Mechanics – Racks
Page Page Page Page 4
26
48
61
Accessories
Page Page Page Page 84
91
114
134
Knürr @lock systems
Knürr Cable Management
Knürr System Accessories
Knürr Fan Units
Mechanics – Enclosure
Page Page Page 148
164
171
Knürr Smaract®
Knürr DoubleProRack®
Knürr ConAct®
SmartAisle™ – Containment
Page Page 176
194
SmartAisle™ – Containment
SwitchTubes™
Cooling HDCS
Page Page Page Page
201
202
208
213
Cooling HDCS
Knürr® DCL
Knürr® DCD
Rack cooling accessories
Power Distribution Rack
Page 216
Knürr PowerTrans2®
Rack PDUs
Page 220
Page 222
Page 232
Page244
Page 248
Emerson Network Power – Power Distribution Units
MPX™
MPH2™
MPE
DI-STRIP®
Monitoring
Page Page 271
276
Knürr RMS Compact II®
Inline Metering System
Emerson Network Power
Page Page Page 282
283
284
Glossary
Centers of Expertise
Data Center Infrastructure for Large Applications
Knürr DCM®
Knürr Miracel® 2
Knürr Miracel® Server Rack
Knürr Miracel® Network Rack
|3
Knürr DCM®
Knürr DCM® – Rack System
Market-leading Data Center Technologies for your Company
Integrated solutions.
Integrated benefits.
Integrated energy efficiency.
Reliability:
Proven business-critical
technologies that minimize failure
sources and guarantee the greatest
possible reliability for your IT
systems.
Everything from one source:
One central provider for the
provision, configuration,
installation and support of your
products and technologies.
Integration:
From the rack through to the
entire room – our products and
services form one integrated
holistic system.
Technical support:
Where required, on-site and
factory-site support is provided by
application specialists. Emerson
Network Power has the largest
team of customer service
specialists in the world.
Flexible configuration options:
Our products and technologies
deliver flexibility, adaptability
and cost-effective solutions.
Energy efficiency:
We offer our customers "Green IT"
solutions that set standards on
the ITC market – a data-center
infrastructure that stays abreast
current and future requirements
and facilitates management
and automation of physical
infrastructure.
4 | Mechanics – Racks
Knürr provides comprehensive products and services for all requirements –
from compact racks and computer rooms, right through to global data
centers.
Based on a variety of data centers' specific requirements, Emerson Network
Power has developed a customized, ready-made solution: rack systems with
integrated thermal management, power supply cooling and monitoring. We
also provide optional services such as on-site expertise and support, thereby
ensuring that you can easily order, configure, manage and implement your
Knürr solution.
Knürr DCM®
Telecom Rack
Power Rack
Colocation Rack
Cooling Rack
Network Rack
Cabling Rack
Integrated Racks
Rack Cooling
Rack PDU
KVM Switch
Serial Console
LCD Trays
UPS
Monitoring
Server Rack
Knürr DCM®
Knürr DCM® – Rack System
Overview
Knürr DCM® and DCM® Colocation
L ight aluminum frame,
can be disassembled
– E asy, low weight transport.
– L ow stress on DC raised floors.
42 U / 47 U
– e . g. 42 U with 2000 mm external height
including caster mounting.
Simple internal cabling
Comfort and safety
– Easy to move even when rack
is fully equipped.
T-slot system
– Freely selectable arrangement of accessories.
Static load rating
–1
5000 N with stationary version.
–1
0000 N with caster mounting.
Knürr Miracel® Server Rack
Aluminum construction,
threaded connection system
–H
igh flexibility and stability with low weight;
simple assembly and disassembly.
4
1 U / 46 U
– e . g. 41 U with 2000 mm external height or 41
U with 2100 mm and mobile plinth.
Static load rating
–5
000 N with stationary version.
–3
000 N with mobile plinth.
Special server extrusions
– Guaranteed easy mounting
of 19" servers from all manufacturers.
Optional tilt restraint
– Ensures safety of service personnel.
Also available integrated into the plinth.
Flexible ventilation components
– Always the right ventilation solution with the
corresponding accessory components, e.g.
via perforated floor panels, top covers and
doors (perforation: 83 %).
Knürr Miracel® Network Rack
Aluminum construction,
Threaded connection system
–H
igh flexibility and stability with low weight;
simple assembly and disassembly.
Static load rating
–5
000 N with stationary version.
–3
000 N with mobile plinth.
T-slot system
– F reely selectable arrangement of accessories.
Easy mounting of all non-standard
components – variable in 19" and 25 mm
increments.
6 | Mechanics – Racks
Cable management
– Guaranteed orderly and space-saving
cable management.
– Easily adjustable to installation site: Cable
management can be selected from an
extensive range of accessory components.
Knürr DCM®
Knürr DCM®
Knürr DCM®
The Modular Rack Platform for a Future-proof Data Center
Everything in the data center begins with the Knürr DCM®!
Modular building box: quick,
cost-effective and sustainable.
Maximum space for power-supply
and cabling components allowing
them to be placed alongside the
panels.
Structural stability with low weight
provided by light aluminum structure that can be disassembled.
The Knürr DCM® is the modular building block for all "in row" applications of
Emerson Network Power’s products. It’s used as server racks, power racks,
or storage racks.
COLD AISLE CONTAINMENT
MODULAR
UPS
SmartAisleTM
Liebert® APM
More variability with stepless,
adjustable-depth air containment
with vertical extrusions.
SERVER RACK
Knürr DCM®
Knürr DCM® Colocation
Positioning of rack in area of application
8 | Mechanics – Racks
AISLE COOLER
Liebert® CRV
Knürr DCM®
Knürr DCM®
Knürr DCM®
Application-optimized Server-Rack Solution –
The Keystone for your IT Solutions
Height
2200 mm / 47 U
The right rack size
for every application
2000 mm / 42 U
Knürr Data Center Module
The Knürr DCM® is Emerson
Network Power's globally available
rack for world-wide, standardized
data center planning.
Global standard
The 2000 mm height and 1100 mm
depth rack version is the global
platform for rack suites at Emerson
Network Power. Cooling racks,
power racks and server racks based
on the Knürr DCM platform
guarantee easy integration into
the rack suite.
Metric measurements
for global use.
Stable and secure
Knürr DCM seismic-tested version
available up on request. Static load
of up to 1500 kg. Flexible use as a
server or active network rack.
10 | Mechanics – Racks
Width
600 mm
800 mm
1000 mm
1100 mm
1200 mm
Depth
Knürr DCM®
Knürr DCM®
Knürr DCM®
Features
High-load cabinet
Static load of 1500 kg featuring a new design,
more stable profiles and new high-load corner
joints. (1)
Screw design
Since the rack can easily be dismantled, even to
the most restricted areas are accessible. (2)
Light aluminum frame
Lower weight allows for easier,
lighter transportation. (3)
1. DCM20059
Convenient
Tool-free door assembly. (4)
Integrated tilt restraint
Quick and easy installation and disassembly.
12 | Mechanics – Racks
Largest possible perforation
For improved airflow. (7)
Maximum space
PDUs and cable management can also be
housed in the space between the 19" level and
the side panel.
Low, heavy-duty casters
Even fully equipped rack can be moved safely
and conveniently. (5)
3. DCM20030
Cable management
Guaranteed orderly and space-saving cable
management. Adaptable to site installation
requirements: cable management can be
selected from an extensive range of accessory
components. (6)
Adjustable-depth air separation
Cold/warm air is sealed alongside the
panels, permitting adjustment of the depth.
The standard air-containment accessory
(with 1 U slot) can be used to increase the
usable space of your server rack up to 6 U. (8)
2. DCM20008
4. DCM20006
5. DCM20028
6. DCM20027
7. MIR20265
8. DCM20000
Knürr DCM®
Knürr DCM®
Technical data
Finish/Color
– Basic rack, polished.
– Visible surface of covers RAL 7021 dark-grey.
Material
– Extruded aluminum.
– Corner piece, die-cast aluminum.
–C
overs, steel sheet, zinc-passivated.
– Steel sheet doors.
Installation dimensions compliant with
IEC 60297-1 and IEC 60297-2
–H
eight: 42 U / 47 U (1 U) = 44.45 mm).
– Width: 482.6 mm (19" construction).
80
Available space
– Jumpering space, 80 mm.
–1
30° door opening angle in the rack suite and
180° as individual rack.
Static load rating
– 15000 N (stationary model).
– 10000 N (mobile model).
Tests depending on design
– IP test compliant with IEC 60529.
– Earthing and protective conductor test
compliant with DIN EN 60950.
Further standards and tests may be provided
upon on request.
Rack suites
To create a rack suite with "n" racks, the
following is required:
– n-1 racks without side panels and
1 rack with side panels.
– In a rack suite, per connection you
one set of rack connectors.
Configurations
– Stationary on leveling feet.
–M
obile with caster mounting and
leveling feet.
DCM20066
Nom. dimension
W
W1
W2
D
D1
D2
W 600 / D 1000
591
535
485
986
856
885
W 600 / D 1100
591
535
485
1086
956
985
W 600 / D 1200
591
535
485
1186
1056
1085
W 800 / D 1000
791
735
685
986
856
885
W 800 / D 1100
791
735
685
1086
956
985
W 800 / D 1200
791
735
685
1186
1056
1085
Nom. height
H
h
H 2000
1996
1872.60
H 2200
2218
2094.85
Mechanics – Racks | 13
Knürr DCM®
Knürr DCM®
Configurator
1
Up to 5,160,000 different assembly options
9
5
6
11
2
7
11
8
4
3
10
14 | Mechanics – Racks
Knürr DCM®
Knürr DCM® – configured by you
Impressive number of variations: There are now up
to 5,160,000 options for a configuration with the
'Configurable Article Number' (which replaces the old order
numbers).
This 'Configurable Article Number' reproduces all requested
properties via multiple choice (see chart below), without
requiring detailed rack descriptions.
Definite identification is also possible with a repeat order
or upgrade.
A system building box that significantly simplifies your
combinations.
The 'Configurable Article Number' makes a significant contribution to simplifying the selection and ordering process.
Product line
Knürr DCM®
Doors
Dimensions
1
D=
DCM Rack
5
2
3
4
Rack
Height
Rack
Width
Rack
Depth
Front
Door
Covers
19" Extrusions
6
Rear
Door
7
8
19"Front
Vertical
Extrusion
19"Rear
Vertical
Extrusion
9
Cover
Color
10
Plinth
Packaging
11
Side Panel
12
13
14
Packaging
19"
Extrusion
inseration
depth
Free
X=
A=
X
B=
6=
E=
A=
A=
A=
S=
C=
A=
B=
D=
8=
F=
B=
B=
B=
X=
E=
B=
Fixed plinth, Left
200 mm
L=
85/
740 mm
G=
C=
C=
C=
G=
R=
R=
C=
G=
G=
S=
X=
F=
X=
D=
X=
R=
E=
X=
F=
42 U
47 U
600
mm
800
mm
1000
mm
1100
mm
1200
mm
Single
glass door
Single
glass door
19" vertical
server extrusion with air
containment
and 3x1 U
cut-outs
Single
Single
19" vertical
steel sheet steel sheet server
door
door
extrusion
with air
containment
Perforated
single
door
19" vertical
server
extrusion
Without 19"
extrusions
Perforated 19" Server
single
extrusion
door
with vertical
cablemanger
Cover
with lateral
cable entry
Cover short
Per­forated Perforated 19" vertical
double
double
server
door
door
extrusion
Without
door
Top cover
with cable
entry
Without
cover
Fixed plinth, Both sides
100 mm
Standard
packaging
80/
740 mm
B=
With casters Right
Fixed without plinth.
Only feet
are heightadjustable
15
Color
1=
RAL
7035
8=
RAL
7021
115/
740 mm
Without
123/
740 mm
Back cover
200/
740 mm
Without
door
215/
740 mm
G=
Configuration
example:
150/
740 mm
Product
Height
Width
Depth
Front Door
Rear Door
19"Front
Vertical
Extrusion
19"Rear
Vertical
Extrusion
Cover
Plinth
Side Panel
Packaging
Free
Free
Color
D
B
8
F
G
X
A
X
C
B
L
X
X
X
8
Example product number
Mechanics – Racks | 15
Knürr DCM®
DCM® 19" Heavy Duty Server Rack
Width 600 and 800, Stationary and Mobile
DCM20003stationary DCM20022mobile
– Perforated front door.
– Perforated rear double door.
–Special 19" server extrusions for mounting
all off-the-shelf 19" servers.
– Components compliant with IEC 297-3.
– Cable entry via top and bottom cover.
–Cable entry on the top cover can be completely
removed at the rear allowing installing and
removal of top cover after cabling.
–Mobile design includes heavy-duty casters with
ample floor clearance.
Jumpering space
– Front 80 mm.
Load rating
– 15000 N static.
– 10000 N mobile in data center with load.
Protection rating
– IP 20.
DCM20063
Average width 800 mm, stationary
Tests
– Earth compliant with DIN EN 60950.
–M
obile design: Earthing compliant with
VDE 0100 T 540.
– IP test compliant with DIN 40 050 / IEC 529.
Airflow circulation
– Perforation: 83 %.
Color
– Visible surfaces and covers coated with
RAL 7021, dark-grey.
Scope of delivery
– 1 x basic rack.
– 4 x 19" server extrusions, steel sheet
inclusive U marking.
– 2 x side panels with quick connectors.
– 1 x top cover with cable entry (three-piece
sliding plates can also be opened
completely).
– 1 x front door, single, perforated, with handle
and mounting for cylinder lock.
– 1 x rear door, double, perforated, steel sheet,
with handle and mounting for cylinder lock.
– 4 x leveling feet.
– 1 x complete earthing test (VDE 0100).
– Mobile design: additionally 2 caster mountings with heavy-duty casters and integrated
cable entry.
How supplied
– Mounted.
Note
Order mounting adapters for 19" server
extrusion for mounting Knürr accessories are
also available.
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, steel sheet, powder-coated texture.
–C
overs, zinc-passivated steel sheet,
powder-coated texture.
–1
9" extrusions, 2.5 mm zinc-passivated steel
sheet.
DCM20062
DCM20065
Average width 600 mm, stationary
Average width 800 mm, mobile
W
H
D
U
d
Model
Order No.
UP
600
2000
1200
42
740
Stationary with side panels
DB6GCGSSCFBXXX8
1 unit
600
2200
1200
47
740
Stationary with side panels
DD6GCGSSCFBXXX8
1 unit
800
2000
1200
42
740
Stationary with side panels
DB8GCGSSCFBXXX8
1 unit
800
2200
1200
47
740
Stationary with side panels
DD8GCGSSCFBXXX8
1 unit
600
2000
1200
42
740
Stationary, no side panels
DB6GCGSSCFXXXX8
1 unit
600
2200
1200
47
740
Stationary, no side panels
DD6GCGSSCFXXXX8
1 unit
800
2000
1200
42
740
Stationary, no side panels
DB8GCGSSCFXXXX8
1 unit
800
2200
1200
47
740
Stationary, no side panels
DD8GCGSSCFXXXX8
1 unit
600
2000
1200
42
740
Mobile with side panels
DB6GCGSSCRBXXX8
1 unit
800
2200
1200
47
740
Mobile with side panels
DD8GCGSSCRBXXX8
1 unit
600
2000
1200
42
740
Mobile, no side panels
DB6GCGSSCRXXXX8
1 unit
800
2200
1200
47
740
Mobile, no side panels
DD8GCGSSCRXXXX8
1 unit
Dimensions in mm:
DCM20064
Average width 600 mm, mobile
16 | Mechanics – Racks
W = Width
L
= Length
H = Height
h = Installation height
D = Depth
d = Insertion depth
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr DCM®
DCM® Colocation Rack
Width 800 mm
DCM20085
–Perforated front doors with one-point lock.
–Perforated rear doors with one-point lock.
–Special 19" server extrusions for mounting all
off-the-shelf 19" servers.
–Components compliant with IEC 297-3.
–Standard cable entry with fixed cable duct on
the right.
–Optional cable entry left and right via cover and
shelf by reconfiguration of the cable ducts.
–Secure partitioning of the individual bays using
securely mounted partition shelves.
–With lateral air containment at the front left
and right, each with 1 U opening for mounting
different components.
–Doors with handle and mounting for cylinder
lock.
–Adjustment of the 19" extrusions in 50 mm
increments.
Jumpering space
– Front 80 mm.
Load rating
– 25 kg per rack unit (stationary).
– e . g.: 15 U x 25 kg = 375 kg load for one bay.
DCM20086
Protection rating
– IP 20.
Tests
– Earthing compliant with VDE 0100 T 450.
– IP test compliant with DIN 40 050 / IEC 529.
Airflow circulation
– Perforation: 83 %.
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, steel sheet, powder-coated texture.
DCM20087
– Partitioning walls, zinc-passivated steel sheet.
–1
9" extrusions, 2.0 mm zinc-passivated steel sheet.
– Shelf supports, zinc-passivated.
Color
– Visible cover surface
Final digit of Order No. .1: RAL 7035 light-grey.
Final digit of Order No. .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x basic rack.
– 4 x 19" server extrusions with regular
perforations, steel sheet with rack unit
marking for each bay.
– 1 x top cover, including cable-inlet covers on
the left and right sides.
– 1 x shelf, including cable-inlet cover on the
right; open on the left for cable duct = cable
entry.
– 2 x partitioning shelves for 3-way colocation.
– 1 x partitioning shelf for 2-way colocation.
– 3 x perforated front and rear doors
for 3-way colocation.
– 2 x perforated front and rear doors
for 2-way colocation.
– Air containment at the front with covered
1 U cut-out.
How supplied
– Mounted.
Note
– Also order mounting adapters for 19" server
extrusion for mounting Knürr accessories.
– Side partitioning walls must be ordered
separately.
– Cylinder locks must be ordered separately .
– Stationary plinth can be mounted afterwards.
W
H
D
U
d
Model
Order No.
UP
800
2000
1100
13
740
3-way colocation without side panels
01.143.000.X-001
1 unit
800
2000
1200
13
740
3-way colocation without side panels
01.143.000.X-002
1 unit
800
2200
1100
15
740
3-way colocation without side panels
01.143.000.X-003
1 unit
800
2200
1200
15
740
3-way colocation without side panels
01.143.000.X-004
1 unit
800
2000
1100
20
740
2-way colocation without side panels
01.143.001.X-001
1 unit
800
2000
1200
20
740
2-way colocation without side panels
01.143.001.X-002
1 unit
800
2200
1100
23
740
2-way colocation without side panels
01.143.001.X-003
1 unit
800
2200
1200
23
740
2-way colocation without side panels
01.143.001.X-004
1 unit
800
2000
1100
13
740
3-way colocation with side panels
01.143.002.X-001
1 unit
800
2000
1200
13
740
3-way colocation with side panels
01.143.002.X-002
1 unit
800
2200
1100
15
740
3-way colocation with side panels
01.143.002.X-003
1 unit
800
2200
1200
15
740
3-way colocation with side panels
01.143.002.X-004
1 unit
DCM20088
800
2000
1100
20
740
2-way colocation with side panels
01.143.003.X-001
1 unit
800
2000
1200
20
740
2-way colocation with side panels
01.143.003.X-002
1 unit
800
2200
1100
23
740
2-way colocation with side panels
01.143.003.X-003
1 unit
800
2200
1200
23
740
2-way colocation with side panels
01.143.003.X-004
1 unit
Mechanics – Racks | 17
Knürr DCM®
DCM® Steel Sheet Door,
with Perforation, Single
DCM® Steel Sheet Door
without Perforation, Single
Material
– Steel sheet 1.0 mm.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Scope of delivery
– 1 x door (single).
– 1 x Mounting kit.
DCM20097
Protection rating
Installation in the DCM® rack (depending
on the other rack components) enables a
maximum protection class of IP 20.
DCM20127
How supplied
– Preassembled.
Material
– Steel sheet 1.0 mm.
Volume flow
– Large surface perforation
(83 % free surface) enables optimum
airflow through the rack.
Scope of delivery
– 1 x single steel sheet door.
– 1 x Mounting kit.
How supplied
– Preassembled.
W
H
Order No.
UP
W
H
Order No.
UP
600
2000
01.147.803.X
1 unit
600
2000
01.147.534.X
1 unit
600
2200
01.147.806.X
1 unit
600
2200
01.147.537.X
1 unit
800
2000
01.147.805.X
1 unit
800
2000
01.147.536.X
1 unit
800
2200
01.147.808.X
1 unit
800
2200
01.147.539.X
1 unit
DCM® Steel Sheet Door
DCM® Steel Sheet Door
with Perforation, Double
without Perforation, Double
Material
– Steel sheet 1.0 mm.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Scope of delivery
– 1 x double door.
– 1 x Mounting kit.
DCM20096
Protection rating
Installation in the DCM® rack (depending
on the other rack components) enables a
maximum protection class of IP 20.
DCM20129
How supplied
– Preassembled.
Material
– Steel sheet 1.0 mm.
Volume flow
– Large surface perforation
(83 % free surface) enables optimum
airflow through the rack.
Scope of delivery
– 1 x double steel sheet door.
– 1 x Mounting kit.
How supplied
– Preassembled.
W
H
Order No.
UP
W
H
Order No.
UP
600
2000
01.147.921.X
1 unit
600
2000
01.147.570.X-002
1 unit
600
2200
01.147.922.X
1 unit
600
2200
01.147.570.X-003
1 unit
800
2000
01.147.929.X
1 unit
800
2000
01.147.570.X-010
1 unit
800
2200
01.147.930.X
1 unit
800
2200
01.147.570.X-011
1 unit
Dimensions in mm:
W = Width
L = Length
H = Height
h = Installation height
D = Depth
d = Insertion depth
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
18 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr DCM®
DCM® Cover
DCM® Single Glass Door
with Lateral Cable Entry
–With lateral cable entry on both sides
(sliding plates).
–For orderly cable management inside the
rack.
Material
– Steel sheet 1.0 mm.
– Single safety-glass panel,
4.0 mm clear glass.
DCM20079
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Protection rating
Installation in the DCM® rack (depending
on the other rack components) enables a
maximum protection class of IP 20.
DCM20128
Material
– Steel sheet 1.5 mm.
Scope of delivery
– 1 x single glass door.
– 1 x Mounting kit.
How supplied
– Preassembled.
Scope of delivery
– 1x top cover with lateral cable entry.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
1000
01.147.572.X
1 unit
W
H
Order No.
UP
600
1100
01.147.573.X
1 unit
600
2000
01.147.540.X
1 unit
600
1200
01.147.574.X
1 unit
600
2200
01.147.543.X
1 unit
800
1000
01.147.577.X
1 unit
800
2000
01.147.542.X
1 unit
800
1100
01.147.578.X
1 unit
800
2200
01.147.545.X
1 unit
800
1200
01.147.579.X
1 unit
DCM® Double Glass Door
DCM® Short Cover
– For covering the front area
of the top; the rest remains open.
–Facilitates unobstructed cable entry
in the rack.
Material
– Steel sheet 1.0 mm
– Single safety-glass panel,
4.0 mm clear glass.
DCM20081
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Scope of delivery
– 1 x short cover.
– 1 x Mounting kit.
Protection rating
Installation in the DCM® rack (depending
on the other rack components) enables a
maximum protection class of IP 20.
DCM20130
DCM20080
Scope of delivery
– 1 x double glass door.
– 1 x Mounting kit.
W
H
How supplied
– Preassembled.
Order No.
Material
– Steel sheet 1.5 mm.
How supplied
– In sets.
BRack
L
Order No.
UP
600
250
01.147.268.X
1 unit
800
250
01.147.269.X
1 unit
UP
600
2000
01.147.571.X-002
1 unit
600
2200
01.147.571.X-003
1 unit
800
2000
01.147.571.X-010
1 unit
800
2200
01.147.571.X-011
1 unit
Mechanics – Racks | 19
Knürr DCM®
DCM® Heavy Duty Plinth
Fixed, Height 200 mm
DCM® Side Panel
–Side panel module for Knürr
DCM® 19" heavy duty server rack
– Fixed incl. leveling option.
– Cable entry possible from all sides.
–Cover plate front and rear closed.
Material
– Steel sheet 1.0 mm.
DCM20037b
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Load rating
– 10000 N static.
Material
– Steel sheet.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Scope of delivery
– 1 x side panel.
– 1 x Mounting kit.
How supplied
– In sets.
DCM20069
H
D
Order No.
UP
2000
1000
01.147.876.X
1 unit
2000
1100
01.147.877.X
1 unit
2000
1200
01.147.878.X
1 unit
Scope of delivery
– 4 x plinth corners, incl. leveling feet.
– 8 x cover plates.
– 1 x Mounting kit.
How supplied
– In sets.
W
H
D
Order No.
UP
600
200
1000
01.147.788.X
1 unit
2200
1000
01.147.880.X
1 unit
600
200
1100
01.147.789.X
1 unit
2200
1100
01.147.881.X
1 unit
600
200
1200
01.147.790.X
1 unit
2200
1200
01.147.882.X
1 unit
800
200
1000
01.147.796.X
1 unit
800
200
1100
01.147.797.X
1 unit
800
200
1200
01.147.798.X
1 unit
DCM Heavy Duty Plinth
Fixed, Height 100 mm
®
DCM® Floor Panel
3-piece
–Fixed.
– Cable entry possible from all sides.
–Cover plate front and rear closed.
– For covering the rack underside.
–For flexible cable entry at
the front and rear
– For racks with caster mounting.
Load rating
– 10000 N static.
DCM20037
Material
– Steel sheet.
DCM20032
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Material / Finish
– Steel sheet, 1.5 mm, zinc passivated.
Scope of delivery
– 3 x floor panels.
– 2 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Scope of delivery
– 4 x plinth corners with leveling.
– 2 x plinth cover plates with slots.
– 2 x plinth cover plates closed on the
side.
– 1 x Mounting kit.
W
D
Model
Order No.
UP
600
1000
without cable entry
01.147.834.0
1 unit
How supplied
– In sets.
600
1100
without cable entry
01.147.835.0
1 unit
600
1200
without cable entry
01.147.840.0
1 unit
W
H
D
Order No.
UP
800
1000
without cable entry
01.147.838.0
1 unit
600
100
1000
01.147.738.X
1 unit
800
1100
without cable entry
01.147.839.0
1 unit
800
1200
without cable entry
01.147.844.0
1 unit
600
100
1100
01.147.739.X
1 unit
600
100
1200
01.147.740.X
1 unit
800
100
1000
01.147.746.X
1 unit
800
100
1100
01.147.747.X
1 unit
800
100
1200
01.147.748.X
1 unit
20 | Mechanics – Racks
Knürr DCM®
DCM® Air Containment Unit
Closed
DCM® Floor Panel
for Cable Entry with
Sponge-rubber Seal
–Quick and easy retrofitting
of cold/warm area separation unit in rack.
– Side cover plates, closed.
–Screwed on the side on the
19" extrusions.
–Foam seals off the side panels or the same
level in the linked rack enabling stepless
depth adjustment.
– For covering the rack underside.
–With rubber seal for flexible cable entry
at the front or rear.
– For racks without caster mounting.
DCM20035
Material / Finish
– Steel sheet, 1.5 mm, zinc passivated.
– Sponge rubber, 50 mm x 30 mm.
Scope of delivery
– 1 x cable entry.
– 2 x floor panels.
– 2 x mounting brackets.
– 1 x Mounting kit.
Material
– Steel sheet.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
LUF20350
How supplied
– In sets.
W
D
Model
Order No.
UP
600
1000
With cable entry
01.147.846.0
1 unit
600
1100
With cable entry
01.147.847.0
1 unit
600
1200
With cable entry
01.147.852.0
1 unit
800
1000
With cable entry
01.147.850.0
1 unit
800
1100
With cable entry
01.147.851.0
1 unit
800
1200
With cable entry
01.147.856.0
1 unit
How supplied
– In sets.
W
H
Model
Order No.
UP
600
2000 20
No cut-outs, for racks with caster mounting
01.147.898.X
1 set
600
2000 20
No cut-outs, for racks without caster mounting
01.147.901.X
1 set
600
2200 20
No cut-outs, for racks with caster mounting
01.147.899.X
1 set
with 3 x 1 U Cover Plates, Vertical
600
2200 20
No cut-outs, for racks without caster mounting
01.147.902.X
1 set
– Quick and easy retrofitting
of cold/warm area separation unit in rack.
–Side cover plates with 2 cut-outs each for
cable routing.
–3 x 1 U cut-outs, covered with cover
plates.
– Screwed to the side of the 19" extrusions.
–Foam seals off the side panels or the same
level in the linked rack enabling stepless
depth adjustment.
800
2000 20
No cut-outs, for racks with caster mounting
01.147.889.X
1 set
800
2000 20
No cut-outs, for racks without caster mounting
01.147.895.X
1 set
800
2200 20
No cut-outs, for racks with caster mounting
01.147.890.X
1 set
800
2200 20
No cut-outs, for racks without caster mounting
01.147.896.X
1 set
DCM Air Containment Unit
®
D
DCM® Mounting Adapter
for 19" Server Extrusion
Material
– Steel sheet.
–For mounting standard Knürr
components (storage shelves, drawers,
chassis rails, keyboard tray, etc.)
in 19" installation space.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
LUF20351
Scope of delivery
– 2 x side cover plates (only W 800).
– 2 x vertical foam elements.
– 1 x cover plate, bottom.
– 1 x foam element, top.
– 1 x Mounting kit.
Material
– Steel sheet, zinc-passivated 2.5 mm.
DCM20052
Scope of delivery
– 2 x side cover plates.
– 1 x cover plate, bottom.
– 1 x foam element, top.
– 1 x Mounting kit.
Scope of delivery
– 4 x adapters.
W
H
D
U
Order No.
UP
44
44
44
1
01.147.640.9
1 set
How supplied
– In sets.
W
H
D
Model
Order No.
UP
01.147.904.X
1 set
800 2000 20 3 x 1 U cover plate, for racks without caster mounting 01.147.907.X
1 set
800 2200 20 3 x 1 U cover plate, for racks with caster mounting
01.147.905.X
1 set
800 2200 20 3 x 1 U cover plate, for racks without caster mounting 01.147.908.X
1 set
800 2000 20 3 x 1 U cover plate, for racks with caster mounting
Dimensions in mm:
W = Width
L = Length
H = Height
h = Installation height
D = Depth
d = Insertion depth
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Racks | 21
Knürr DCM®
DCM® Partitioning Wall
Mounted, Fixed
DCM® PDU Bracket
–For orderly cable management in the rack.
–For hanging in trade-standard PDUs
without tools.
–Especially suited to Knürr and Liebert
PDUs.
DCM20077
Material / Finish
– Steel sheet, 1.5 mm, zinc passivated,
powder-coated.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
DCM20103
DCM20076
– For air containment between two fixed
adjacent racks.
–The partition wall is mounted only on one
rack. It must be mounted before the other
racks are installed.
–The partition wall is slotted in at the top
of the rear extrusion and mounted to the
basic rack with quick connectors. The rack
connectors are then fitted to the top and
bottom of the frame extrusions from the
inside.
–Plastic cover extrusions are provided to
seal the gap between two racks. These
can be clipped into place at the front and
back of the gap.
Scope of delivery
– 1 x PDU bracket.
– 1 x Mounting kit.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
How supplied
– In sets.
W
HRack
D
U
Order No.
UP
125
2000
25
42
01.147.816.X
1 unit
125
2200
25
47
01.147.817.X
1 unit
DCM20104
DCM® Partitioning Wall
for Retrofitting
– For air containment between two fixed
adjacent racks.
–The partition wall is fitted between two
racks and can be inserted from one side of
the linking racks, and guided along the
upper rear-enclosure extrusion of one of
the linked racks.
–After the partition wall has been inserted,
fasteners are bent or welded on one side
of the wall and screwed into the vertical
T-slot to secure the structure.
The rack connectors included in the
supply are used on the opposite side.
DCM20105
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
How supplied
– In sets.
D
Order No.
UP
1000
01.147.690.X
1 unit
2000
1200
01.147.692.X
1 unit
2200
1000
01.147.693.X
1 unit
2200
1200
01.147.695.X
1 unit
DCM® Rack Connector
Installed on Top
DCM20082
How supplied
– In sets.
Scope of delivery
– 1 x fixed partition wall.
– 1 x set of rack connectors.
– 2 x cover extrusions.
– 1 x Mounting kit.
H
–For mechanical, stable joining of
of rack and enclosure suites.
–Can be installed on the racks from the top
directly into the die-cast corner piece.
–Easy access for installation from the
outside.
Scope of delivery
– 1 x partitioning wall for retrofitting.
– 1 x set of rack connectors.
– 1 x Mounting kit.
2000
Material
– Steel sheet 1.0 mm.
DCM20106
Material
– Steel sheet 1.0 mm.
Material / Finish
– Steel sheet, 3 mm, zinc passivated.
Scope of delivery
– 2 x rack connectors for connecting
2 racks / frames).
– 4 x knurled screws M12.
DCM20083
How supplied
– In sets.
H
D
Order No.
UP
2000
1000
01.147.644.X
1 unit
Model
Order No.
UP
2000
1200
01.147.646.X
1 unit
30x140
01.147.642.7
1 set
2200
1000
01.147.647.X
1 unit
2200
1200
01.147.649.X
1 unit
22 | Mechanics – Racks
Knürr DCM®
Rack Connector
External Mounting
Cover Extrusion
for Rack Suites, IP20
–For secure connection of several racks.
–Front and rear external mounting.
DCM20125
Material
- Steel sheet, 1 mm,
electroplated zinc.
Scope of delivery
– 6 x mounting straps.
– 1 x Mounting kit.
Material
– PVC extruder cover, black.
Scope of delivery
– 2 x vertical lengths.
– 2 x depth lengths.
DCM20126
DCM20123x
Order No.
UP
01.127.114.9
1 set
Rack Connector
Internal Mounting
–For mechanical, stable joining of
of rack and enclosure suites.
MIR00100
2
1
DCM20124
H
D
U
Order No.
UP
2000
1000
42
01.127.760.9
1 set
2200
1000
47
01.127.761.9
1 set
2000
1200
42
01.127.762.9
1 set
2200
1200
47
01.127.763.9
1 set
Material / Finish
– Steel sheet, 2 mm, zinc passivated.
Tilt Restraint for DCM®
Installation positions
1. On the horizontal extrusion
(bottom and top; front and rear).
2. V
ertically on the vertical extrusion
(front and rear; top and bottom).
Scope of delivery
– 8 x mounting brackets
(for connecting 2 racks / frames)
– 1 x Mounting kit.
–Quick and easy mounting and removal.
–Can be integrated in the Knürr DCM®
rack.
– Use only as required.
DCM20026
Scope of delivery
– 2 x anti-tilt restrainers.
How supplied
– In sets.
DCM20084
How supplied
– In sets.
Note
Only use on racks
without partition walls.
Order No.
UP
01.130.935.7
1 set
Order No.
UP
01.147.641.9
2 unit
DCM gap sealing depth
profil
–Quick and easy retrofitting.
– Gap sealing between the linked rack.
DSC00194
Material
– Steel sheet, zinc-passivated 1,5 mm.
Scope of delivery
– 2 gab sealings.
– Mounting kit.
How supplied
– In Sets.
DSC00202
Dimensions in mm:
W = Width
L = Length
H = Height
h = Installation height
D = Depth
d = Insertion depth
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Order No.
UP
01.147.643.9
1 unit
Mechanics – Racks | 23
Knürr DCM®
Mounting Bracket
fixed
DCM® Seismic Kit
–Fixed.
– Sits flush (airtight).
– Even load distribution on base.
–Also suitable for Miracel® racks.
DCM20090
–Retrofitting set for DCM® racks.
–Installed on site.
–Rack with installed seismic kit tested in
accordance with Telcordia GR63 Zone 4.
–Maximum total load for seismic
application: 500 kg per rack.
Load rating
– 15000 N static.
Material / Finish
– Steel sheet, powder-coated.
Finish
– Powder-coated texture, RAL 7021.
Color
– RAL 7021, dark-grey.
Scope of delivery
– 2 x mounting brackets for the depth.
– 2 x mounting brackets for the width.
– 1 x Mounting kit.
Scope of delivery
– 2 x seismic frames.
– Support for rear EIA-compliant level.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
Material
– Steel sheet 3.0 mm.
DCM20091
DCM20107
W
H
D
Order No.
UP
W
H
Model
Order No.
UP
600
27
600
01.147.509.8
1 unit
600
2000
DCM® USA
01.147.909.8
1 set
600
27
700
01.147.510.8
1 unit
600
2000
DCM® Standard
01.147.912.8
1 set
600
27
800
01.147.511.8
1 unit
600
27
900
01.147.512.8
1 unit
600
27
1000
01.147.513.8
1 unit
600
27
1100
01.147.514.8
1 unit
600
27
1200
01.147.515.8
1 unit
700
27
600
01.147.517.8
1 unit
700
27
700
01.147.518.8
1 unit
700
27
800
01.147.519.8
1 unit
700
27
900
01.147.520.8
1 unit
700
27
1000
01.147.521.8
1 unit
700
27
1100
01.147.522.8
1 unit
700
27
1200
01.147.523.8
1 unit
800
27
600
01.147.525.8
1 unit
800
27
700
01.147.526.8
1 unit
800
27
800
01.147.527.8
1 unit
800
27
900
01.147.528.8
1 unit
800
27
1000
01.147.529.8
1 unit
800
27
1100
01.147.530.8
1 unit
800
27
1200
01.147.531.8
1 unit
24 | Mechanics – Racks
Knürr DCM®
Partitioning Wall
for Retrofitting
Cable Duct
for Retrofitting
–To secure the partitions between the
individual bays against unauthorized
access.
–Each bay can be closed off separately
after initial installation.
–The partitioning wall is inserted above
and below on mounting strips provided
for this purpose.
–The partitioning wall is screwed into place
at the front and covered by the door.
DCM20110
–Secure cabling for data and
power-supply lines.
–Subsequent installation in 2- or 3-way
colocation.
–Cable duct can be rebuilt at any time.
DCM20099
Material
– Order no.1:
Powder-coated RAL 7035,
light-grey texture.
–O
rder no.8:
Powder-coated RAL 7021,
dark-grey texture.
Material
– Steel sheet 1.0 mm.
Finish / Color
– Zinc-passivated steel sheet.
Scope of delivery
– 1 x cable duct for retrofitting.
– 1 x Covers.
– 1 x Mounting kit.
How supplied
– In sets.
DCM20109
Finish / Color
– Zinc-passivated steel sheet.
Scope of delivery
– 1 x partitioning wall for retrofitting.
– 1 x Mounting kit.
How supplied
– In sets.
DCM20100
Note
Partitioning wall can be installed from
every position (top, middle, bottom, left
and right).
H
D
Model
Order No.
UP
2000
1100
For 3-way colocation
01.143.100.X-001
1 unit
H
Model
Order No.
UP
2000
Short, for 3-way colocation
01.143.101.0-001
1 unit
2000
Long, for 3-way colocation
01.143.101.0-002
1 unit
2200
Short, for 3-way colocation
01.143.101.0-003
1 unit
2200
Long, for 3-way colocation
01.143.101.0-004
1 unit
2000
1200
For 3-way colocation
01.143.100.X-002
1 unit
2000
For 2-way colocation
01.143.101.0-005
1 unit
2200
1100
For 3-way colocation
01.143.100.X-003
1 unit
2200
For 2-way colocation
01.143.101.0-006
1 unit
2200
1200
For 3-way colocation
01.143.100.X-004
1 unit
2000
1100
For 2-way colocation
01.143.100.X-005
1 unit
2000
1200
For 2-way colocation
01.143.100.X-006
1 unit
2200
1100
For 2-way colocation
01.143.100.X-007
1 unit
2200
1200
For 2-way colocation
01.143.100.X-008
1 unit
3-point Locking
Upgrade Kit
–Upgrade kit for conversion
to 3-point locking.
–Additional security.
–Can be upgraded at any time.
–Suitable for heights of 2000 and
2200 mm.
DCM20111
Scope of delivery
– 1 x Rod for locking unit.
– 1 x Rod guide.
How supplied
– In sets.
H
Model
Order No.
UP
2000, 2200
for 3-way colocation
01.143.102.7-001
1 unit
Dimensions in mm:
2000, 2200
for 2-way colocation
01.143.102.7-002
1 unit
W = Width
L = Length
H = Height
h = Installation height
D = Depth
d = Insertion depth
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Racks | 25
Knürr Miracel® 2
Knürr® Miracel 2
One system with Infinite Possibilities
Knürr® Miracel, the classic amongst innovative racks, is
demonstrated by the long-standing and continuous
satisfaction of our customers. Drawing on Emerson
Network Power's extensive experience with a wide range
of applications, Miracel has now been adapted for network
and server applications. The innovative Miracel 2 has been
designed to meet current requirements in order to ensure
that it will continue to meet customers' needs well into the
future.
For both network and server applications, the highly
versatile Knürr Miracel 2 combines various components
and applications in one place. Being a modular rack
system, it can easily be expanded at any time and the cable
entry points can be flexibly tailored for specific needs.
26 | Mechanik – Racks
With a load rating of 800 kg, Knürr Miracel 2 is a cleverly
designed space-saving rack that offers ample space for
a wide range of equipment and, thanks to the absence of
depth members, also present at the sides, it provides
maximum flexibility with the greatest possible space for
cables and cooling components. This rack's integrated
castors and doors also make it easy to move without
needing to be tilted. Made from aluminum, Knürr Miracel 2
is extremely light, minimizing raised floor loading and
making it easy to transport and set up. The clever, fullyintegrated T-slot system in the aluminum extrusions also
allows for the free configuration of accessories and makes
it easy to install each and every component.
Knürr Miracel® Serverschrank
Knürr Miracel® 2
Knürr® Miracel 2
Benefits of an All-in-One Server and Network Rack
Knürr® Miracel 2 – Technical Data
Material
– Extruded aluminum.
– Corner piece: die-cast aluminum.
–C
asing: galvanized steel sheet.
– Doors: steel sheet.
Installation dimensions in accordance
with IEC 60297-1 and IEC 60297-2
– Height: 42 HE / 47 HE
(1 HE (or 1U) = 44.45 mm).
–W
idth: 482.6 mm (19" version).
Available space
– 80 mm jumpering space at the front,
215 mm ranges; customizable up on
request.
– Internal hinge: 130° for rack suites:
160° for stand-alone racks.
– External hinge: 180° for stand-alone racks
and rack suites.
Installation options
– Stationary: on levelling feet.
–M
obile: with castor mounting and levelling
feet.
28 | Mechanik – Racks
Finish / Colour
– Basic rack: polished.
–V
isible surface of casing, powder-coated
RAL 7021 dark-grey and RAL 7035
light-grey.
Static load rating
– 8000 N (stationary version).
– 4000 N (mobile version).
Tests depending on the design
– Earthing and earth wire test in accordance
with DIN EN 60950.
– Other standards and certificates upon
request.
Rack suites
To create a rack suite with "n" racks, you will
need:
– 1 x rack without side panels and one rack
with side panels.
– 1 x set of rack connectors per connection.
Knürr Miracel® 2
83% Perforation
offers optimal
airflow
Raised height from
41/46U up to 42/47U
LO
Y
Easy access on all sides
enables comfortable
service and repair
FLO W
S E D H EI G H
T
AI
S
IT
AIR
S Y AC C E S
R
EA
A D C A PA C
Load rate raised
from 500kg up
to 800kg
CL
BE
IC K YS TE M
Clickystem,
easy mounting
accessories
MO
D ULAR
ON
ER
ACK
Light weight
aluminium
construction,
minimizes raised
floor loading
NE
F ITS O F A N AL
Modular design makes
it easy to combine with
DCM racks and Smart
Aisle Containment
N
I
L
CA
S TO R S
Castors for easy
transport
Mechanik – Racks | 29
Knürr Miracel® 2
Knürr® Miracel 2 – LAN Rack – Features
Top cover with
cable inlet rear
+ 25 mm raised
Horizontal extrusion
Depth extrusion
No depth braces required
Vertical extrusion
19" extrusion with
U-marking
Glas door
Knürr® Miracel 2 – LAN Rack
Stationary plinth
with vents
30 | Mechanik – Racks
Knürr Miracel® 2
Knürr® Miracel 2 – Network Rack
– With fixed 19" mounting on the front and
rear for IEC 297-3-compliant components.
–Installation of slot-in runners, drawers, pull-out
shelves and cable management equipment.
–Cable entry via plinth and top cover.
–Cable entry on the top cover, at the rear;
top cover can be attached / removed after
equipment installation.
–Heat is discharged via the raised top cover.
–Door opening angle 160° internal hinges.
Jumpering space
– Front: 123 mm.
Load rating
– 8000 N static .
Protection rating
– IP 20.
Knürr ® Miracel 2 Network Rack
Tests
– Earthing compliant with VDE 0100 T 540.
– IP test EN 60529.
Material / Finish
– Basic rack: extruded aluminum.
– Corner piece: die-cast aluminum, polished.
–C
asing: galvanized steel sheet, powder-coated
texture.
–D
oors, steel sheet, powder-coated texture,
glass infill front door, single safety-glass panel,
4 mm.
– 19" extrusions, 1.5 mm galvanized steel sheet.
Colour
– x = .1 visible surfaces and covers,
RAL 7035 light-grey.
– x = .8 visible surfaces and covers,
RAL 7021 dark-grey.
Included in delivery
– 1 basic rack.
– 4 x 19" perforated steel sheet extrusions
with HE markings. Depth 600 2 x 19".
– 2 x side panels with quick connectors.
– 1 x raised top cover with cable entry rear
(three-piece sliding plates, can also be fully
opened) at the rear.
– 1 x front door, single leaf, single safety-glass
panel, with handle and mounting for cylinder
lock.
– 1 x rear door, single leaf, steel sheet, with
handle and mounting for cylinder lock .
– 1 x plinth with vents at the front and rear,
including closed sides and mounting for filter
mat.
– 1 x complete earthing kit (VDE 0100).
– 4 x levelling feet.
Delivered
– Assembled.
W
H
D
U
h
800
2120
600
42
1873
800
2340
600
47
2095
800
2120
800
42
1873
d
565
Order No.
Units
01.157.005.x-022
1 unit
01.157.005.x-032
1 unit
01.157.005.x-024
1 unit
800
2340
800
47
2095
565
01.157.005.x-034
1 unit
800
2120
1000
42
1873
740
01.157.005.x-026
1 unit
800
2340
1000
47
2095
740
01.157.005.x-036
1 unit
Mechanik – Racks | 31
Knürr Miracel® 2
Knürr® Miracel 2 – Server Rack – Features
Top cover
with cable entry
rear side
Horizontal extrusion
Depth extrusion
No depth braces required
Vertical extrusion
19" extrusion with
U-marking
Perforated door
biggest possible
perforation
Knürr® Miracel 2 – LAN Rack
levelling feet,
castors optional
32 | Mechanik – Racks
Knürr Miracel® 2
Knürr® Miracel 2 – Server Rack
– With fixed 19" mounting on the front and
rear for IEC 297-3-compliant components.
– Perforated single leaf front and rear doors.
–Special 19" server extrusions for mounting
all trade-standard 19" servers.
– Components compliant with IEC 297-3.
– Cable entry via base and top cover.
–Cable entry on the top cover, at the rear, can
be completely removed, allowing the top cover
to be fitted and removed after cabling.
Jumpering space
– Front: 80 mm.
Load rating
– 8000 N static.
Protection rating
– IP 20.
Knürr® Miracel 2 Server Rack
Tests
– Earthing compliant with VDE 0100 T 540.
– Earthing compliant with DIN EN 60950.
– IP test EN 60529.
Material / Finish
– Basic rack: extruded aluminum.
– Corner piece: die-cast aluminum, polished.
–C
overs: galvanized steel sheet, powder-coated
texture.
– Doors: steel sheet, powder-coated texture.
– 19" extrusions, 2.5 mm galvanized steel sheet.
Colour
– x = .1 visible surfaces and covers,
RAL 7035 light-grey.
– x = .8 visible surfaces and covers,
RAL 7021 dark-grey.
Included in delivery
– 1 x basic rack.
– 4 x 19" steel sheet server extrusions
with HE markings.
– 2 x side panels with quick connectors.
– 1 x top cover with cable entry rear(three-piece
sliding plates, can also be fully opened).
– 1 x front door, single leaf, with handle and
mounting for cylinder lock.
– 1 x rear door, single leaf, with
handle and mounting for cylinder lock.
– 1 x complete earthing kit (VDE 0100).
– 4 x levelling feet.
Delivered
– Assembled.
Note
For drawers, pull-out shelves and slot-in
runners, please also order the extrusion adapter
01.147.6409.
W
H
D
U
h
d
Order No.
Units
600
1969
1000
42
1873
740
01.157.007.x-026
1 unit
600
2218
1000
47
2095
740
01.157.007.x-036
1 unit
600
1969
1200
42
1873
740
01.157.007.x-028
1 unit
600
2218
1200
47
2095
740
01.157.007.x-038
1 unit
800
1969
1000
42
1873
740
01.157.011.x-026
1 unit
800
2218
1000
47
2095
740
01.157.011.x-036
1 unit
800
1969
1200
42
1873
740
01.157.011.x-028
1 unit
800
2218
1200
47
2095
740
01.157.011.x-038
1 unit
Mechanik – Racks | 33
Knürr Miracel® 2
Knürr® Miracel 2
Configurator
Knürr® Miracel 2 – configured by you
Knürr® Miracel 2 is one of our configurable rack platforms. You can easily select
the options you need for your individual rack, based on the matrix.
9
5
6
11
7
11
8
4
13
3
10
Example product number
Dimensions
Doors
19" Extrusions
Product
Height
Width
Depth
Front
Door
Rear Door
19"
Front
Vertical
Extrusion
N
B
8
E
A
B
S
34 | Mechanik – Racks
Cover parts
Color
19"
Rear
Vertical
Extrusion
Top Cover
Plinth
Side
Panel
Packaging
S
B
A
B
X
Jumpering
Free
Depth
Q
X
Color
8
Knürr Miracel® 2
Doors
Option
Matrix
Dimensions
N=
2
3
Rack
Height
Rack
Width
B=
Miracel 2
Rack
42 U
D=
47 U
6=
600
mm
8=
800
mm
4
Rack
Depth
C=
Cover parts
19" Extrusions
5
6
7
8
9
Front
Door
Rear
Door
19"
Vertical
Extrusion
Front
19"
Vertical
Extrusion
Rear
Top Cover
Plinth
12
13
Side Panel Packaging
A=
B=
B=
B=
E=
C=
C=
C=
F=
D=
D=
180°
perforated
single door
right
19" vertical
extrusion
with
mounting
holes
E=
E=
S=
F=
F=
X=
G=
G=
Q=
Sheet steel
per­forated
double
door
80/565mm
H=
H=
T=
180°
perforated
double
door
123/565mm
M=
M=
U=
180° sheet 180°
steel single sheet steel
door right single door
right
150/565mm
N=
N=
V=
P=
P=
Q=
Q=
X=
R=
D=
900
mm
1000
mm
1100
mm
G=
1200
mm
Sheet steel Sheet steel 19" vertical
single door single door server
extrusion
right
right
with air
partition
H=
19" vertical
extrusion
with
mounting
holes
S=
19" vertical
server
extrusion
X=
Without 19"
Perforated Perforated 19" vertical
extrusions
single door single door server
extrusion
with cable
management
180°
perforated
single door
right
Glass
double
door
Glass
double
door
H=
19" vertical
server
extrusion
Sheet steel Sheet steel Without 19"
extrusions
double
double
door
door
Sheet steel
per­forated
double
door
180°
perforated
double
door
180°
sheet steel
double
door
180°
sheet steel
double
door
Top Cover,
with cut out
for fan units,
with cable inlet
rear
Plinth,
stationary
100mm, all
sides closed
C=
B=
B= Both
sides
Jumpering
Depth/
Installation
Depth Front
A=
19" vertical
Glass
Glass
single door single door server
extrusion
right
right
with air
partition and
3x1 U cut-outs
A=
11
A=
800
mm
B=
10
Color
X=
A=
Standard 80/740mm
packaging
Top cover with Plinth,
cable inlet rear stationary
200mm, all
sides closed
C=
C=
Partitioning
wall fixed
right
115/740mm
E=
F=
D=
D=
G=
G=
Top cover
short with
lateral cable
inlet closed
Top cover
short
S=
Without plinth. Partitioning
Adjustable feed wall fixed
only
left
123/740mm
Plinth,
stationary
100mm, with
vent slots
L=
E=
Left
200/740mm
Top cover
without cut out
for fan units,
with cable inlet
rear, with
spacer
Plinth,
stationary
200mm, with
vent slots
H=
R= Right
F=
X=
R=
X=
G=
Without top
cover
Mobile casters Without
side panels
14
15
Free Color
X
1=
RAL
7035
8=
RAL
7021
X=
blank
215/740mm
150/740mm
200/565mm
180° glass 180° glass
single door single door
right
right
180°glass
double
door
select your options
Without
door
180°glass
double
door
rear/front
door
X=
Without
door
Mechanik – Racks | 35
Knürr Miracel® 2
Knürr® Miracel 2
Configurator – Technical Overview of selectable options
A
E
F
G
B
C
Overview of all mountable parts
Product
2
3
4
5
6
7
8
9
10
11
12
Height
Width
Depth
Front
Door
Rear
Door
19" Vertikal
Extrusion
front
19" Vertikal
Extrusion
rear
Top Cover
Plinth
Side
Panel
Packaging
36 | Mechanik – Racks
13
14
Jumpering
Free
Space
15
Color
Knürr Miracel® 2
B
C
E
S
C
L
A
R
C
B
C
E
F
G
R
D
H
A
A
B
G
H
Mechanik – Racks | 37
Knürr Miracel® 2
Knürr® Miracel 2
Configurator – Technical Overview of selectable dimensions
8
13
4
2
7
3
10
Product
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Height
Width
Depth
Front Door
Rear Door
19" Vertikal
Extrusion
front
19" Vertikal
Extrusion rear
Top Cover
Plinth
Side
Panel
Packaging
Jumpering
Space
Free
Color
38 | Mechanik – Racks
Knürr Miracel® 2
AC C
S
E
I
E SSO R
Mechanik – Racks | 39
Knürr Miracel® 2
Knürr® Miracel 2 – Accessories
Doors
Material
– Steel sheet: 1.0 mm.
Included in delivery
– 1 x door, single, double leaf or rear panel.
– Mounting kit.
Colour
–d
igit X of order number .1:
RAL 7035 light-grey.
–d
igit X of order number .8:
RAL 7021 dark-grey.
Image
Description
Note
Perforated doors (83 % free surface) allow for
optimum airflow throughout the rack.
Delivered
– Pre-assembled.
Version
Dimensions
Dimensions
H 2000 mm
Steel sheet door
with perforation,
single leaf
Steel sheet door
with perforation,
double leaf
Steel sheet door
without perforation,
single leaf
Steel sheet door
without perforation,
double leaf
Glass door,
single leaf
Glass door,
double leaf
Rear panel
40 | Mechanik – Racks
H 2200 mm
W 600 mm
W 800 mm
W 600 mm
W 800 mm
160° opening angle,
interal hinges
01.147.803.X
01.147.805.X
01.147.806.X
01.147.808.X
180° opening angle,
external hinges
01.157.092.X-007
01.157.092.X-009
01.157.092.X-010
01.157.092.X-012
160° opening angle,
interal hinges
01.147.921.X
01.147.929.X
01.147.922.X
01.147.930.X
180° opening angle,
external hinges
01.157.093.X-007
01.157.093.X-009
01.157.093.X-010
01.157.093.X-012
160° opening angle,
interal hinges
01.147.534.X
01.147.536.X
01.147.537.X
01.147.539.X
180° opening angle,
external hinges
01.157.094.X-007
01.157.094.X-009
01.157.094.X-010
01.157.094.X-012
160° opening angle,
interal hinges
01.147.570.X-002
01.147.570.X-010
01.147.570.X-003
01.147.570.X-011
180° opening angle,
external hinges
01.157.095.X-007
01.157.095.X-009
01.157.095.X-010
01.157.095.X-012
160° opening angle,
interal hinges
01.147.540.X
01.147.542.X
01.147.543.X
01.147.545.X
180° opening angle,
external hinges
01.157.090.X-007
01.157.090.X-009
01.157.090.X-010
01.157.090.X-012
160° opening angle,
interal hinges
01.147.571.X-002
01.147.571.X-010
01.147.571.X-003
01.147.571.X-011
180° opening angle,
external hinges
01.157.091.X-007
01.157.091.X-009
01.157.091.X-010
01.157.091.X-012
01.157.080.X-003
01.157.080.X-004
01.157.080.X-005
01.157.080.X-006
Knürr Miracel® 2
Air Containment
Material
– Steel sheet.
– The cold/warm area partition can be quickly
and easily retrofitted into the rack.
–Side cover plates with 2 cut-outs each for cables
(for 800 mm wide racks).
–3 x 1 HE cut-outs, covered with cover plates
(only in versions with vents).
–Bolted to the sides of the 19" extrusions
(in 800 mm wide racks).
–Sealed off from the side panels or from the
same level of adjoining racks.
–Foam components allow for infinite
adjustability in terms of depth.
Image
Description
Colour
–d
igit X of order number .1:
RAL 7035 light-grey.
–d
igit X of order number .8:
RAL 7021 dark-grey.
Version
Included in delivery
– 2 x side cover plates (for 800 mm wide racks).
– 1 x cover plate, bottom.
– 1 x foam block for the top.
– Mounting kit.
Delivered
– In sets.
Dimensions
Dimensions
H 2000 mm
Air containment
without vents
Air containment
with 3 x 1 HE cover plates, vertical
H 2200 mm
W 600 mm
W 800 mm
W 600 mm
W 800 mm
for Racks with castor
brackets
01.147.898.X
01.147.889.X
01.147.899.X
01.147.890.X
for Racks without castor
brackets
01.147.901.X
01.147.895.X
01.147.902.X
01.147.896.X
for Racks with castor
brackets
01.147.904.X
01.147.905.X
for Racks without castor
brackets
01.147.907.X
01.147.908.X
Brush Strips for Covers with
Cable Entry on the Side
Side Panel
–Side panel module for 19" server rack.
Material
– Steel sheet: 1.0 mm.
Finish / Colour
– digit X of order number .1:
RAL 7035 light-grey.
–d
igit X of order number .8:
RAL 7021 dark-grey.
Brush strips for covers
Included in delivery
– 1 x side panel.
– Mounting kit.
– Brush strip for all covers with cable entry
lateral.
–For dust-protected and flexible cable
entry.
–Can be used instead of mounting the
sliding covers in the top cover.
Included in delivery
– 4 x brush strips.
Delivered
– In sets.
Delivered
– In sets.
Side panel
H
D
Version
Order No.
Units
H
Version
Order No.
Units
2000
600
Side panel
01.147.871.X-004
1 unit
800
Brush strips
01.157.016.9-001
1 unit
2000
800
Side panel
01.147.871.X-005
1 unit
1000
Brush strips
01.157.016.9-003
1 unit
2000
1000
Side panel
01.147.876.X
1 unit
1100
Brush strips
01.157.016.9-004
1 unit
2000
1100
Side panel
01.147.877.X
1 unit
1200
Brush strips
01.157.016.9-005
1 unit
2000
1200
Side panel
01.147.878.X
1 unit
2200
600
Side panel
01.147.871.X-007
1 unit
2200
800
Side panel
01.147.871.X-008
1 unit
2200
1000
Side panel
01.147.880.X
1 unit
2200
1100
Side panel
01.147.881.X
1 unit
2200
1200
Side panel
01.147.882.X
1 unit
Mechanik – Racks | 41
Knürr Miracel® 2
Plinth
– Stationary, including levelling options.
– Cable entry accessible from all sides.
– Removable cover plates.
– Installation option for filter mat.
Load rating
– 10,000 N static.
Material
– Steel sheet.
Image
Colour
–d
igit X of order number .1:
RAL 7035 light-grey.
–d
igit X of order number .8:
RAL 7021 dark-grey.
– 8 x cover plates (for a height of 200 mm,
without and 4 with vents), 4 cover plates
4
(for a height of 100 mm, 2 without vents and
2 x with vents).
– Mounting kit.
Included in delivery
– 4 x plinth corners, including levelling feet.
–8
x cover plates without vents (for a height
of 200 mm), 4 x cover plates without vents
(for a height of 100 mm).
Delivered
– In sets.
Description
Dimensions
W 600 mm
Image
D 600 mm
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
Stationary plinth,
100 mm high,
without vents
01.157.055.X-001.
01.157.055.X-002
01.147.738.X
01.147.739.X
01.147.740.X
Stationary plinth,
100 mm high,
with vents
01.157.060.X-001
01.157.060.X-002
01.157.060.X-004
01.157.060.X-005
01.157.060.X-006
Stationary plinth,
200 mm high,
without vents
01.157.056.X-001
01.157.056.X-002
01.147.788.X
01.147.789.X
01.147.790.X
Stationary plinth,
200 mm high,
with vents
01.157.065.X-001
01.157.065.X-002
01.157.065.X-004
01.157.065.X-005
01.157.065.X-006
Description
Dimensions
W 800 mm
D 600 mm
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
Stationary plinth,
100 mm high,
without vents
01.157.055.X-007
01.157.055.X-008
01.147.746.X
01.147.747X
01.147.748.X
Stationary plinth,
100 mm high,
with vents
01.157.060.X-007
01.157.060.X-008
01.157.060.X-010
01.157.060.X-011
01.157.060.X-012
Stationary plinth,
200 mm high,
without vents
01.157.056.X-007
01.157.056.X-008
01.147.796.X
01.147.797X
01.147.798.X
Stationary plinth,
200 mm high,
with vents
01.157.065.X-007
01.157.065.X-008
01.157.065.X-010
01.157.065.X-011
01.157.065.X-012
42 | Mechanik – Racks
Knürr Miracel® 2
Bottom Plates
– For covering the rack underneath.
–With foam rubber seals and brush strips;
cable entry at the front and rear.
– For racks with and without castor mounting.
Included in delivery
– Bottom plates.
– 2 x mounting brackets.
– Mounting kit.
Material / Finish
– Steel sheet, 1.5 mm, galvanized.
– F or foam rubber seals (foam rubber,
50x30 mm).
Delivered
– In sets.
Image
Description
Dimensions
W 600 mm
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
Bottom plate
closed, used with castor
bracket
01.157.040.0-001
01.157.040.0-003
01.157.040.0-004
01.157.040.0-005
Bottom plate
for cable entry
with foam rubber seal
01.157.041.0-001
01.147.846.0
01.147.847.0
01.147.852.0
Bottom plate,
modular
01.157.042.0-001
01.147.834.0
01.147.835.0
01.147.840.0
Bottom plate
for cable entry
with brush strip
01.157.045.0-001
01.157.045.0-003
01.157.045.0-004
01.157.045.0-005
Perforated
bottom plate
d 155mm
Image
01.157.025.0-001
Description
Dimensions
W 800 mm
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
Bottom plate
closed, used with castor
bracket
01.157.040.0-006
01.157.040.0-008
01.157.040.0-009
01.157.040.0-010
Bottom plate
for cable entry
with foam rubber seal
01.157.041.0-003
01.147.850.0
01.147.851.0
01.147.856.0
Bottom plate,
modular
01.157.042.0-003
01.147.838.0
01.147.839.0
01.147.844.0
Bottom plate
for cable entry
with brush strip
01.157.045.0-006
01.157.045.0-008
01.157.045.0-009
01.157.045.0-010
Perforated
bottom plate
d 155mm
01.157.025.0-003
Mechanik – Racks | 43
Knürr Miracel® 2
Top Cover
– With cable entry (sliding plates).
– For orderly cable management in the rack.
Material
– Steel, 1.5 mm.
Image
Included in delivery
– 1 top panel with cable entry.
– Mounting kit.
Finish / Colour
–d
igit X of order number .1: RAL 7035 lightgrey,
powder-coated texture.
–d
igit X of order number .8: RAL 7021 darkgrey, powder-coated texture.
Description
Delivered
– In sets.
Dimensions
W 600 mm
D 600 mm
Top cover
with lateral cable inlet
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
01.147.570.X
01.147.572.X
01.147.573.X
01.147.574.X
01.157.050.X-001
01.157.050.X-002
01.157.050.X-003
Top cover
with rear cable entry
Top cover with cut out
for fan units and cable
inlet rear. Cut out closed
with screwed blanking
panel.
Top cover
with cably inlet rear
and 25 mm raised
Top cover, short
d 250mm
Image
01.157.051.X-001
01.157.052.X-001
01.157.052.X-003
01.157.051.X-002
01.157.051.X-004
01.147.268.X
Description
Dimensions
W 800 mm
D 600 mm
Top cover
with lateral cable inlet
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
01.147.575.X
01.147.577.X
01.147.578.X
01.147.579.X
01.157.050.X-004
01.157.050.X-005
01.157.050.X-006
Top cover
with rear cable entry
Top cover with cut out
for fan units and cable
inlet rear. Cut out closed
with screwed blanking
panel.
Top cover with
cably inlet rear
and 25 mm raised
Top cover, short
d 250mm
44 | Mechanik – Racks
01.157.051.X-005
01.147.269.X
01.157.052.X-004
01.157.052.X-006
01.157.051.X-006
01.157.051.X-008
Knürr Miracel® 2
Knürr® Miracel 2 - Cable Manager, Vertical
Left and right models (2 cable managers) included in the delivery.
– Ideal for organizing cabling of jumper cables
(copper and fiber optic cables).
– Retrofitting is possible.
– Prepared for full cold/warm partitioning.
– Cable fingers can be easily installed
(clipped on).
– Cabling towards the rear through
rubber bushings or cutouts.
Can be used for recess depths from 145 mm.
Standard inclusion
– 1 x cable duct, left.
– 1 x cable duct, right.
– 4 x rows with cable fingers.
– 4 x rubber bushings.
– 1 x Mounting kit.
Delivery
– In pairs (cable fingers unassembled).
Material / Finish
– Cable duct: Sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Cable fingers: Polyamide (UL 94 V-0), black.
h
pt
de
ss m
ce m
Re 145
≥
W Rac
H Rac
U
Recess depth
Cutout size
Order No.
Up
800
2000
D
42
Starting from 145 mm
81 x 100 mm
05.045.152.x
1 pair
800
2200
47
Starting from 145 mm
81 x 100 mm
05.045.153.x
1 pair
Recess depth
≥ 145 mm
81 mm
Knürr® Miracel 2 – Cover Panel for Vertical Cable Manager
For only 1 cable manager, i. e., 2 kits required
for B800 rack.
– Covers the vertical cable manager.
– Tool-less fastening – clips onto cable finger.
– Can be swiveled on both sides and removed completely.
Standard inclusion
– 2 x covers.
– 8 x clips.
Delivery
– In sets (clips pre-assembled).
Material / Finish
– Cover: sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Clip: polyamide (UL 94 V-0), black.
W
H
Order No.
Up
55
927
D
U
42
Model
Cutout size
05.045.114.x
1 set
55
103
47
05.045.115.x
1 set
Mechanik – Racks | 45
Knürr Miracel® 2
Partition Wall
Partition wall for retro-fitting
– For air containment between two fixed adjacent racks.
–The partition wall is fitted between two racks and can be inserted from one
side of the linking racks.
– Guided along the upper rear extrusion of one of the linked racks.
–After the partition wall has been inserted, fasteners are bent or welded
on one side of the wall and screwed into the vertical T-slot to secure the
structure. The rack connectors supplied upon delivery are used on the
opposite side.
Material
– Steel sheet: 1.0 mm.
Finish / Colour
– digit X of order number .1: RAL 7035 light-grey, powder-coated texture.
– digit X of order number.8: RAL 7021 dark-grey, powder-coated texture.
Mounted partition wall fixed
–For air containment between two fixed adjacent racks.
–The partition wall is only mounted on one rack and must be mounted
before the other racks are installed.
–The partition wall is slotted in at the top of the rear extrusion and attached
to the basic rack with quick connectors.
–The rack connectors are then fitted to the top and bottom of the frame
extrusions from the inside.
–Plastic cover extrusions are provided to seal the gap between the two racks.
These can be clipped into place at the front and back of the gap.
Included in delivery
– 1 x partition wall.
– 1 x set of rack connectors.
– 2 x cover extrusions (for permanently fixed walls only).
– Mounting kit.
Delivered
– In sets.
Image
Description
Dimensions
Dimensions
H 2000 mm
H 2200 mm
D 1000 mm
D 1100 mm
D 1200 mm
D 1000 mm
D 1100 mm
D 1200 mm
Partition wall
for retro-fitting
01.147.644.X
01.147.645.X
01.147.646.X
01.147.647.X
01.147.648.X
01.147.649.X
Mounted,
fixed partition wall
01.147.690.8
01.147.691.8
01.147.692.8
01.147.693.X
01.147.694.X
01.147.695.X
19" Vertical Extrusion with Mounting Holes
– For mounting 19" rack components.
–For mounting cable management systems and components.
–For mounting slot-in runners, intermediate fixed and pull-out shelves.
(no adapter neccesary)
–For mounting drawers.
Included in delivery
– Front (2 x 19" vertical extrusions with cross beam and 2 x 19" mountings –
for 600 mm wide racks without cross beam and 19" mountings).
– Rear (2 x 19" vertical extrusions with 4 x 19" mountings –
for 600 mm wide racks without 19" mountings).
Material / Finish
– Steel sheet: 1.5 mm, galvanized.
Delivered
– In sets.
W
H
U
Description
Order No.
Units
600
2000
42
19" Vertical extrusion, front
01.157.110.7.003
1 unit
600
2000
42
19" Vertical extrusion, rear
01.157.110.7.003
1 unit
600
2200
47
19" Vertical extrusion, front
01.157.110.7.004
1 unit
600
2200
47
19" Vertical extrusion, rear
01.157.110.7.004
1 unit
800
2000
42
19" Vertical extrusion, front
01.157.113.7.003
1 unit
800
2000
42
19" Vertical extrusion, rear
01.157.114.7.003
1 unit
800
2200
47
19" Vertical extrusion, front
01.157.113.7.004
1 unit
800
2200
47
19" Vertical extrusion, rear
01.157.114.7.004
1 unit
46 | Mechanik – Racks
Knürr Miracel® 2
Internal Mounting
Rack Connector
Tilt restraint for Knürr® Miracel
2 Racks, Quick Assembly System
–For mechanical, stable joining of
rack and enclosure suites.
– Quick and easy mounting
– Used as required
MIR20051
Included in delivery
–2 x tilt restraints.
Delivery
– In sets.
MIR00100
Units
01.127.310.9
2 units
Installation positions
1. On the horizontal extrusions
(top & bottom and front & back).
2. Vertically on the vertical extrusion
(front & back and top & bottom).
2
Order No.
Material / Finish
– Steel sheet: 2 mm, galvanised.
1
Included in delivery
– 8 x mounting brackets (for connecting
2 racks / frames).
– Mounting kit.
Mounting Adapter
for 19" Server Extrusion
DCM20084
Delivery
– In sets.
–For mounting standard Knürr-
components (shelves, drawers, slot-in
runners, keypad drawers, etc.) inside
19" racks.
Order No.
Units
01.130.935.7
1 set
DCM20052
Material
– Steel sheet: 2.5 mm, galvanized.
Included in delivery
– 4 x adapters.
W
H
U
Order No.
Units
63
44
1
01.147.640.9
1 set
Knürr® Rack
Connector Installed on Top
–For mechanical, stable joining of
rack and enclosure suites.
–Can be installed on racks from the top
directly into the die-cast corner piece.
–Easy access for installation from the
outside.
DCM20082
Castor Bracket
Included in delivery
– 2 x rack connectors (for connecting
2 racks / frames).
– 4 x knurled screws, M12.
–Mobile version: an additional 2 castor
mountings with castors including
integrated cable entry.
Cross beam
Material / Finish
– Steel sheet: powder-coated texture.
Colour
– RAL 7021 dark-grey.
Material / Finish
– Steel sheet: 3 mm, galvanized.
DCM20083
Delivery
– In sets.
Version
Order No.
Units
30 x 140
01.147.642.7
1 set
Included in delivery
– 1 set of castor brackets.
– Mounting kit.
Delivery
– In sets.
W
Description
Order No.
600
Miracel 2.0 castor bracket
01.157.073.8 001 1 set
Units
800
Miracel 2.0 castor bracket
01.157.073.8 003 1 set
Mechanik – Racks | 47
Knürr Miracel® Server Rack
Knürr Miracel® Server Rack
Versatile, Distinctive, Integrative
Features
ALUMINUM CONSTRUCTION
Proven technology based on
aluminum extrusions provides high
flexibility and stability at a low
weight, thereby significantly simplifying handling and installation.
Knürr Miracel®, the name that stands for renown, innovative 19" racks,
delivers a rack system that significantly enhances energy efficiency.
The main feature of Miracel is the unsurpassed aluminum extrusion with T-slot.
It is easy to assemble and offers an extensive range of accessory options.
T-SLOT SYSTEM
Freely selectable arrangement
of accessories. Easy mounting of
all non-standard components –
variable in 19" and 25 mm
increments.
SCREW DESIGN
The cabinet is easy to dismantle
which guarantees ease of access
even in restricted areas.
CAN BE EXTENDED AT ANY TIME
System can be extended easily
while maintaining the IP protection
rating (IP20).
FLEXIBLE VENTILATION
COMPONENTS
Always the right ventilation
solution with the corresponding
accessories, such as perforated
doors, (perforation: 83 %).
CABLE MANAGEMENT
guarantees optimized cable routing. Cable management can be selected from an extensive range of
accessory components.
ALUMINUM SERVER EXTRUSIONS
COMPLIANT WITH IEC 60297
Extrusions for quick installation of
all commercially available servers
as well as network- and telecom
components.
48 | Mechanics – Racks
Positioning of rack in area of application
Knürr Miracel® Server Rack
Knürr Miracel® Server Rack
Knürr Miracel® Server Rack
Features
A variety of concepts and designs
for front-to-rear airflow.
83% perforation guarantees
optimum airflow. (1)
Optional tilt restraint ensures safety of service
personnel.
Also available integrated into the plinth. (2)
Different cable-management variants
permit adaptation to set-up conditions. (3)
Special server extrusions guarantee easy
mounting of 19" servers supplied by all
manufacturers. (4)
1. MIR20265
2. MIR20054
Glass door example
1. MIR00407
3. MIR20058
2. MIR20053
50 | Mechanics – Racks
4. MIR20082
Knürr Miracel® Server Rack
Knürr Miracel® Server Rack
Knürr Miracel®
Technical data
Top cover / fan top cover
Basic frame
Vertical extrusion (T-slot / mounting holes)
Side panel
Rear panel
Trim extrusions
Front doors
Side panel
Rack bottom
Multifunctional brace
Rack bottom plate units
Rack plinth, fixed
Rack plinth, mobile
Mounting bracket
52 | Mechanics – Racks
Knürr Miracel® Server Rack
MIR00309
Vertical extrusion with mounting holes
Steel for 19" racks
Material
– Extruded aluminum
– Corner piece, die-cast aluminum
– Covers, sheet steel, zinc-passivated
–D
oors: sheet steel or with single safety-glass
panel, 4 mm or 6 mm (double doors).
Installation dimensions IEC 297-3 and
IEC 917 compliant
–H
eight: 23 U / 37 U / 41 U / 46 U
(1 U = 44.45 mm)
66 module / 74 module / 82 module
(1 module = 25 mm).
–W
idth: 482.6 mm (19" construction)
535 mm (20" module construction).
Available space
–8
2 % of the basic surface can be used
as space for installation and cable routing.
– Jumpering space in front, 123 mm or 73 mm.
– 180° door opening angle.
MIR20041 19" server extrusion
Configurations
– Stationary, on leveling feet.
– Stationary with plinth.
– Mobile with plinth and snib.
Finish / Color
– Basic rack, polished.
– Optional: door trim, black, RAL 9011.
–V
isible surface of covers powder-coated,
light-grey RAL 7035 or dark-grey RAL7021.
MIR00307
Vertical extrusion with T-slot
Aluminum for 19" construction
MIR00308
MIR20271
Vertical extrusion with T-slot
Aluminum for metric construction, 20 module
Vertical extrusion with mounting holes
Static load rating
– 5000 N with stationary version.
– 3000 N with mobile plinth.
Heat transfer
– Dissipation:
Closed cover: up to 500 W.
Vent lid: up to 700 W.
Tests depending on design
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with IEC 529.
– UL test 1244.
– NEMA 12 standard.
– EMC shielding attenuation compliant with
MIL-STD 285 (10 MHz - 30 MHz) and
VG 95 373 Part 15 (30 MHZ - 1GHz).
– Vibration and shock test compliant with
ETS 300 019.
– Seismic test, Bellcore (NEBS)
TR-NWT 000063 Zone 4.
– Earthing, VDE 0 100 T 540.
Further standards and tests up on request.
Rack suites
– To create a rack suite with 'n' racks, the
following is required: n-1 racks without side
panels and one rack with side panels.
In a rack suite you require one set of rack
connectors per connection.
W [mm]
W1 [mm]
X [mm]
600
535
485
700
635
585
800
735
685
900
835
785
D [mm]
D1 [mm]
Y [mm]
600
530
485
800
730
685
900
830
785
1000
930
885
1200
1130
1085
MIR00332
Aluminum for 19" racks
Mechanics – Racks | 53
Knürr Miracel® Server Rack
Knürr Miracel®
Configurator
1
Up to 550,000 different assembly options
9
5
6
2
7
11
8
11
4
3
10
54 | Mechanics – Racks
Knürr Miracel® Server Rack
Knürr Miracel® – configured by you
Impressive number of variations: there are now up to
550,000 options for a configuration with the 'Configurable
Article Number' (which replaces the old order numbers).
This 'Configurable Article Number' reproduces all requested
properties via multiple choice (see chart below), without
requiring detailed rack descriptions.
A system building box that significantly simplifies your combinations.
Clear identification is also possible with a repeat order or
upgrade.
The 'Configurable Article Number' makes a significant contribution to simplifying the selection and ordering process.
Product line
Knürr Miracel®
Doors
Dimensions
1
M=
Miracel
Modular
Rack
5
2
3
4
Rack
height
Rack
width
Rack
depth
A=
41 U
Door
front
Covers
19" Extrusions
6
Door
rear
7
8
19"
vertical
extrusion,
front
19"
vertical
extrusion,
rear
9
Color
10
12
Cover
Plinth
Side panel
6=
C=
A=
A=
H=
H=
C=
A=
B=
8=
E=
B=
B=
S=
S=
D=
D=
L=
G=
C=
C=
T=
T=
T=
F=
R=
E=
E=
X=
S=
F=
F=
G=
G=
R=
R=
X=
X=
600
mm
800
mm
800
mm
1,000
mm
1,200
mm
Single
glass door
Single
glass door
19" verticalextrusion
cut outs
Sheet steel Sheet steel 19" Server
single
single
vertical
door
door
extrusion
Perforated Perforated 19" vertical
single
single
extrusion
door
door
with T-Slot
Double
glass door
Double
glass door
19" verticalextrusion
cut outs
19" Server
vertical
extrusion
19" vertical
extrusion
with T-Slot
Without
19"
extrusions
Packaging
11
Cover with cable
Fixed plinth, Both sides
entry and prepared 100 mm
for upgrade with
CoolBlast fan unit
Cover with cable
entry (raised with
spacers, 30 mm)
and prepared for
retrofitting CoolBlast fan unit
Cover closed
Mobile
plinth
No plinth.
Height can
only be
varied with
adjustable
feet
13
15
14
Packaging
Free Free
X=
X
Standard
packaging
X
Color
1=
RAL
7035
8=
Left
RAL
7021
Right
X=
Cover closed
(raised with
spacers, 30 mm)
Without
X=
Sheet steel Sheet steel
double
double
door
door
Without cover
Perforated Perforated
double
double
door
door
With rear
panel
Configuration
example:
Without
door
With rear
panel
Without
door
Product
Height
Width
Depth
Front door
Rear door
19"
vertical
extrusion,
front
19"
vertical
extrusion,
rear
Cover
Plinth
Side panel
Packaging
Free
Free
Color
D
B
8
F
G
X
A
X
C
B
L
X
X
X
8
Example product number
Mechanics – Racks | 55
Knürr Miracel® Server Rack
Knürr Miracel® 19" ASP Rack / 19" server rack
Widths 600 mm and 800 mm, front door with perforations
–Basic version without plinth;
can be ordered if required.
–With special 19" server extrusions for mounting
trade-standard servers.
–With a perforated doors on the front and rear
for optimal airflow.
Jumpering space
– Front 85.5 mm.
Scope of delivery
– 1 x basic rack.
– 4 x 19" server sheet-steel mounting
hole extrusions.
– 2 x perforated doors (perforation: 83 %).
– 2 x side panels.
– 1 x cover, closed.
– 1 x complete earthing set.
– 1 x complete locking set.
Load rating
– 5000 N static.
Protection rating
– IP 20.
Also in
RAL 7021 dark-grey
MIR20318
Airflow circulation
– Perforation 83 %.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum.
–M
ultifunctional braces and 19" angular
extrusions, sheet steel, zinc-passivated.
–V
isible surface of the cover
powder-coated texture.
MIR20131
MIR20131
56 | Mechanics – Racks
Color
– Final digit of order number 1: x=1
Visible surface of covers
RAL 7035 light-grey.
– Final digit of order number 8:
Visible surfaces of the covers
RAL 7021 dark-grey.
W
H
D
U
h
d
kg
600
2000
900
41
1852
740
87
How supplied
– Mounted.
Note
Order mounting adapter for 19" server
extrusion for Knürr accessories is also available.
Model
Order No.
UP
01.127.933.X
1 unit
600
2000
1000
41
1852
740
91
01.127.935.X
1 unit
600
2200
1000
46
2052
740
97
01.127.936.X
1 unit
600
2000
1200
41
1852
740
100
01.128.310.X
1 unit
600
2200
1200
46
2052
740
110
01.128.311.X
1 unit
600
2000
900
41
1852
740
74
without side panels
01.127.980.X
1 unit
600
2000
1000
41
1852
740
78
without side panels
01.127.982.X
1 unit
600
2200
1000
46
2052
740
82
without side panels
01.127.983.X
1 unit
800
2000
1000
41
1852
740
99
01.128.314.X
1 unit
800
2200
1000
46
2052
740
108
01.128.315.X
1 unit
800
2000
1200
41
1852
740
108
01.128.316.X
1 unit
800
2200
1200
46
2052
740
116
01.128.317.X
1 unit
800
2000
1000
41
1852
740
86
without side panels
01.128.330.X
1 unit
800
2200
1000
46
2052
740
93
without side panels
01.128.331.X
1 unit
800
2000
1200
41
1852
740
93
without side panels
01.128.332.X
1 unit
800
2200
1200
46
2052
740
99
without side panels
01.128.333.X
1 unit
Knürr Miracel® Server Rack
Knürr Miracel® 19" Server Rack
Width 700, doors with perforation
– 1front door with extensive perforation
for air intake.
–Prepared for lateral cable management with
asymmetric layout of the extrusions.
–On the front installation space, on the left or
the right side, 3 x 2 U additional 19" installation
frame.
Color
– Final digit of order number 1:
Visible surface of covers
RAL 7035 light-grey.
– Final digit of order number 8:
Visible surfaces of the covers
RAL 7021 dark-grey.
Jumpering space
– Front 85.5 mm.
Scope of delivery
– 1 basic rack.
– 4 19" sheet-steel server extrusions.
– 1 panel, side with 3 x 2 U vertical
installation space.
– 2 side panels.
– 1 cover, closed.
– 1 front door with extensive perforation.
– 1 rear door with extensive perforation.
– 1 mobile plinth with rear cable entry
and leveling feet.
– 1 complete earthing set.
– 1 complete locking set.
Protection rating
– IP 20.
Airflow circulation
– Perforation 83 %.
Also in
RAL 7021 dark-grey
MIR20319
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
– Doors, sheet steel, powder-coated texture.
–M
ultifunctional braces and 19" extrusions,
sheet steel, zinc-passivated.
How supplied
– Mounted.
Note
Order mounting adapter for 19" server
extrusion for Knürr accessories is also available.
W
H
D
U
h
d
kg
Order No.
UP
700
2100
1000
41
1852
740
104
01.127.962.X
1 unit
700
2300
1000
46
2052
740
111
01.127.963.X
1 unit
MIR20279
MIR20279
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Racks | 57
Knürr Miracel® Server Rack
Miracel®air containment for
Miracel®air containment for
19" rack, fixed depth
19" rack for cross cabling
–For separating cold and warm areas in
the rack.
–Prevention of hot-spots (air recirculation).
–Suitable for applications with cross
cabling from rack to rack (e. g. switches).
–Ample 19" installation space: side cover plates with additional
3 x 2 U each in the 19" vertical area
(can be used for components, cable entry
and cable routing).
–Side cover plates with 2 round cut-outs
each for cable routing (covered with
rubber sleeve).
–Generous recess depth for large cable
volumes (depth of 200 is recommended
for switch applications).
–For separating cold and warm areas in
the rack.
–Prevention of hot-spots (air recirculation).
–Quick and easy rack upgrading.
–Ample 19" installation space: Side cover plates with additional
2 x 1 U each in the 19" vertical area.
–Side cover plates with 3 cut-outs each
for cable routing (covered with rubber
sleeve as standard).
LUF20381
Material
– Sheet steel.
Finish
Final digit of order number 1:
powder-coated, RAL 7035 light-grey.
Final digit of order number 8:
powder-coated, RAL 7021 dark-grey.
Warm section
Scope of delivery
– 2 s ide cover plates (cut-outs covered).
– 2 c over plates, top / bottom.
– Mounting kit.
How supplied
– In sets.
Cold section
LUF20382
Warm section
Clearance depth
Cold section
LUF20234
W
H
U
JD
For rack type
Order No.
UP
600
2000
41
85.5
Miracel
03.028.036.X
1 set
700
2000
41
85.5
Miracel – asymmetric only
03.028.037.X
1 set
800
2000
41
85.5
Miracel
03.028.038.X
1 set
LUF20343
Material
– Cover plates: sheet steel.
– High-density: PUR foam (UL94 HF-1).
Finish
Final digit of order number 1:
powder-coated, RAL 7035 light-grey
Final digit of order number 8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 2 side cover plates (cut-outs covered).
– 2 cover plates, top / bottom.
– High-density foam.
– Mounting kit.
How supplied
– In sets.
600
2200
46
85.5
Miracel
03.028.056.X
1 set
W
H
U
JD
Order No.
UP
700
2200
46
85.5
Miracel – asymmetric only
03.028.057.X
1 set
800
2000
41
123
03.028.082.X
1 set
800
2200
46
85.5
Miracel
03.028.058.X
1 set
600
2000
41
123
Miracel
03.028.031.X
1 set
700
2000
41
123
Miracel – asymmetric only
03.028.032.X
1 set
800
2000
41
123
Miracel
03.028.033.X
1 set
600
2200
46
123
Miracel
03.028.051.X
1 set
700
2200
46
123
Miracel – asymmetric only
03.028.052.X
1 set
800
2200
46
123
Miracel
03.028.053.X
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
58 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
800
2000
41
200
03.028.084.X
1 set
800
2200
46
123
03.028.086.X
1 set
800
2200
46
200
03.028.088.X
1 set
Knürr Miracel® Server Rack
Knürr Miracel® plinth
Tilt restraint for Miracel® racks
Quick assembly system
Mobile and fixed, with tilt restraint; height 100 mm
–For fixing on the front
vertical posts of all types of
Miracel® racks.
–Quick and easy mounting and
removal without tools.
– Use only as required.
Type
– Type 1: mobile.
– Type 2: fixed.
Cable entry
– Possible at the rear.
Load rating
– 5000 N static.
Scope of delivery
– 2 tilt restrainers.
Material
– Sheet steel 2 mm.
How supplied
– In sets.
MIR20050
MIR20051
Finish / Color
Powder-coated texture,
RAL 7035 light-grey.
MIR20053
Type 1
Type 2
MIR20260
MIR20261
Scope of delivery Type 1:
– 1 x plinth frame.
– 2 x fixed casters with snib.
– 2 x swivel casters.
– 4 x leveling feet.
– 1 x tilt restrainer.
– 1x Mounting kit.
Scope of delivery Type 2:
– 1 x plinth frame.
– 4 x leveling feet.
– 1 x tilt restrainer.
– 1 x Mounting kit.
How supplied
– In sets.
Order No.
UP
01.127.310.9
2 units
Combination lock
MIR20095
W
H
D
Model
Order No.
UP
600
100
900
Type 1, mobile:
01.127.260.X
1 unit
–Mechanical solution for
a top-quality locking system.
–Access either via a three-digit code that
can be individually set on the handle or
via a master key for access to the rack
independent of the code setting.
–Suitable for Miracel rack single doors with
swing handle.
–Subsequent retrofitting also possible
without mechanical alteration.
800
100
900
Type 1, mobile:
01.127.262.X
1 unit
Model
Order No.
UP
600
100
1000
Type 1, mobile:
01.127.263.X
1 unit
Single doors DCM® / Miracel®
01.137.013.9
1 unit
700
100
1000
Type 1, mobile:
01.127.264.X
1 unit
800
100
1000
Type 1, mobile:
01.127.265.X
1 unit
600
100
1200
Type 1, mobile:
01.127.266.X
1 unit
800
100
1200
Type 1, mobile
01.127.268.X
1 unit
600
100
900
Type 2, fixed
01.127.270.X
1 unit
700
100
900
Type 2, fixed
01.127.271.X
1 unit
800
100
900
Type 2, fixed
01.127.272.X
1 unit
600
100
1000
Type 2, fixed
01.127.273.X
1 unit
700
100
1000
Type 2, fixed
01.127.274.X
1 unit
Door locking set
Scope of delivery
– 1 lock set.
– 2 keys (half-cylinder).
MIR20460
800
100
1000
Type 2, fixed
01.127.275.X
1 unit
Order No.
UP
600
100
1200
Type 2, fixed
01.127.276.X
1 unit
05.041.299.9
1 set
800
100
1200
Type 2, fixed
01.127.278.X
1 unit
Complete locking set
Scope of delivery
– 2 cylinders with 2 keys each.
– 2 lockable fasteners for side panel with
2 keys each.
MIR00069
Order No.
UP
01.130.940.9
1 set
Mechanics – Racks | 59
Knürr Miracel® Server Rack
Knürr Miracel®
Extension kit, 100 mm
–For rack depth extensions even at a later
stage.
–Can be used in combination with doors
(cannot be used for rear panel).
–Further cabling space, for airflow etc.
easily added.
MIR20092
Material
– Sheet steel.
Finish / Color
– Powder-coated texture, RAL 7035.
Scope of delivery
– 2 x vertical cover plates.
– 1 x horizontal cover plate, top.
– 1 x Extension adapter.
– 1 x Mounting kit.
How supplied
– In sets.
MIR20273
Note
Please also order lock bracket set
if using double doors:
Order no. 01.127.649.9
MIR20274
W
H
U
Order No.
UP
600
1200
23
01.127.550.1
1 set
600
1800
37
01.127.553.1
1 set
600
2000
41
01.127.554.1
1 set
600
2200
46
01.127.555.1
1 set
700
1800
37
01.127.559.1
1 set
700
2000
41
01.127.560.1
1 set
700
2200
46
01.127.561.1
1 set
800
1200
23
01.127.562.1
1 set
800
1800
37
01.127.565.1
1 set
800
2000
41
01.127.566.1
1 set
800
2200
46
01.127.567.1
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
60 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Miracel® Network Rack
Miracel® Network Rack
Knürr Miracel® Network Rack
Features
Versatile rack system with many features.
Modular construction
Easy mounting, including all non-standard
components – variable and integrated 19"
or 25 mm increments. (1)
Cable management
Guaranteed orderly and space-saving cable
management. Adaptable to installation-site
requirements: cable management can be
selected from an extensive range of accessory
components. (4)
Expandable at all times
System can be expanded easily
while maintaining the IP protection rating. (3)
Flexible ventilation components
The correct ventilation solution is achieved
by an appropriate selection of accessory
components enabling the airflow to be specially
adapted to the built-in components – for
example, through perforated bottom plates,
top covers and doors. (5)
2. MIR20466
4. MEC20084
5. MIR20265
3. TEC00028
4. MIR00143
5. LUF20124
Advanced Technology
Future-proof and flexible with integrated 19"
and metric technology. (2)
1. MIR00139
62 | Mechanics – Racks
Miracel® Network Rack
Knürr Miracel® 19" distribution rack, NS 25
Width 800, front glass door, T-slot extrusions
– With fixed 19" component on the front
and rear for IEC 297-3-compliant components.
–Installation of slot-in runners and 19" shelves
available.
–Flexible assembly of the built-in units with
T-slot.
– Cable entry via plinth and top cover.
–Cable entry on the top cover can be completely
removed at the rear allowing for installation and
removal of top cover after cabling.
–Dissipated heat discharge via raised fan top
cover.
–Top cover prepared for retrofitting CoolBlast®
fan units facilitating flexible adjustments in
accordance with customer requirements.
– Door opening angle, 180°.
MIR20301
Jumpering space
– Front 123 mm.
Load rating
– 5000 N static.
Protection rating
– IP 40.
MIR20050
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, sheet steel, powder-coated texture.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
–G
lass infill front door, single safety-glass panel,
4 mm.
–M
ultifunctional braces, sheet steel,
zinc-passivated.
MIR20050
Color
– Final digit of order number 1:
Visible surface of covers
RAL 7035 light-grey.
– Final digit of order number 8:
Visible surfaces of the covers
RAL 7021 dark-grey.
Scope of delivery
– 1 x basic rack.
– 4 x aluminum vertical extrusions with T-slot
and increment slide for M5 spring nut.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 2 x side panels with quick connectors.
– 1 x raised fan top cover with cable entry
(three-piece sliding plates, can also be
opened completely), prepared for
retrofitting CoolBlast® fan units.
– 1 x front door, single, single safety-glass panel
with handle and mounting for cylinder
lock.
–1 x rear door, single, sheet steel,
with handle and mounting for cylinder lock.
– 1 x plinth for cable management on the side
and rear with leveling feet (0 - 25 mm).
– 2 x plinth cover plates for front and rear
with vent slots and mounting for filter mat.
– 2 x plinth cover plates, closed.
– 1 x complete earthing set (VDE 0100).
How supplied
– Mounted.
W
H
D
U
h
d
kg
Model
Order No.
UP
800
2120
800
41
1852
565
120
with side panels
01.136.050.X
1 unit
800
2320
800
46
2052
565
130
with side panels
01.136.051.X
1 unit
800
2120
900
41
1852
665
124
with side panels
01.136.056.X
1 unit
800
2320
900
46
2052
665
134
with side panels
01.136.057.X
1 unit
800
2120
1000
41
1852
740
140
with side panels
01.127.970.X
1 unit
800
2320
1000
46
1852
740
140
with side panels
01.127.971.X
1 unit
800
2120
800
41
1852
565
109
without side panels
01.136.250.X
1 unit
800
2120
900
41
1852
665
118
without side panels
01.136.256.X
1 unit
800
2120
1000
41
1852
740
128
without side panels
01.127.975.X
1 unit
Mechanics – Racks | 63
Miracel® Network Rack
Knürr Miracel® 19" distribution rack, NS 25
Width 800, front glass door, 19" mounting hole extrusions
–With fixed 19" component on the front
and rear for IEC 297-3-compliant components.
–Installation of slot-in runners and 19" shelves
available.
– Cable entry via plinth and top cover.
–Cable entry on the top cover can be completely
removed at the rear allowing for installation and
removal of top cover after cabling.
–Dissipated heat discharge via raised fan top
cover.
–Top cover prepared for retrofitting CoolBlast®
fan units facilitating flexible adjustments in
accordance with customer requirements.
– Door opening angle, 180°.
Jumpering space
– Front 123 mm.
MIR20301
Load rating
– 5000 N static.
Protection rating
– IP 40.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, sheet steel, powder-coated texture.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
-G
lass infill front door, single safety-glass panel,
4 mm.
–M
ultifunctional braces, sheet steel,
zinc-passivated.
MIR00223
Color
– Final digit of order number 1:
Visible surface of covers
RAL 7035 light-grey.
– Final digit of order number 8:
Visible surfaces of the covers
RAL 7021 dark-grey.
Scope of delivery
– 1 x basic rack.
– 4 x 19" vertical extrusions, sheet steel with
mounting holes.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 2 x side panels with quick connectors.
– 1 x raised fan top cover with cable entry
(three-piece sliding plates can also be
opened completely), prepared for
retrofitting CoolBlast® fan units.
– 1 x front door, single, single safety-glass panel
with handle and mounting for cylinder
lock.
–1 x rear door, single, sheet steel, with handle
and mounting for cylinder lock.
– 1 x plinth for cable management on the side
and rear with leveling feet (0 - 25 mm).
– 2 x plinth cover plates for front and rear,
with vent slots and fixture for filter mat.
– 2 x plinth cover plates, closed.
– 1 x complete earthing set (VDE 0100).
How supplied
– Mounted.
W
H
D
U
h
d
kg
Model
Order No.
UP
800
2120
800
41
1852
565
120
with side panels
01.133.041.X
1 unit
800
2320
800
46
2052
565
130
with side panels
01.133.042.X
1 unit
800
2120
900
41
1852
665
124
with side panels
01.133.043.X
1 unit
800
2320
900
46
2052
665
134
with side panels
01.133.044.X
1 unit
800
2120
1000
41
1852
740
140
with side panels
01.133.045.X
1 unit
800
2120
800
41
1852
565
109
without side panels
01.133.047.X
1 unit
800
2120
900
41
1852
665
118
without side panels
01.133.048.X
1 unit
800
2120
1000
41
1852
740
128
without side panels
01.133.049.X
1 unit
MIR20050
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
64 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Miracel® Network Rack
Knürr Miracel® 19" distribution rack, NS 26
Width 800, front glass door, mounting hole extrusions
–With fixed 19" component on the front
and rear for IEC 297-3-compliant components.
–Installation of slot-in runners and 19" shelves
available.
–Top cover equipped for retrofitting CoolBlast®
fan units facilitating flexible adjustments in
accordance with customer requirements.
– Door opening angle, 180°
Jumpering space
– Front 123 mm.
Load rating
– 5000 N static.
Protection rating
– IP 40.
MIR20302
Tests
– Earthing compliant with VDE 0100 T 540.
– IP test compliant with DIN 40 050 / IEC 529.
MIR20223
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
–D
oors, sheet steel, powder-coated texture,
glass infill, front door, single safety-glass
panel, 4 mm.
–M
ultifunctional braces and 19" extrusions,
sheet steel, zinc-passivated.
Color
– Final digit of order number 1:
Visible surface of covers
RAL 7035 light-grey.
– Final digit of order number 8:
Visible surfaces of the covers
RAL 7021 dark-grey.
Scope of delivery
– 1 x basic rack.
– 4 x 19" vertical extrusions, sheet steel with
mounting holes.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 2 x side panels with quick connectors.
– 1 x raised fan top cover with cable entry
(three-piece sliding plates can also be
opened completely), prepared for
retrofitting CoolBlast® fan units.
– 1 x front door, single, single safety-glass panel
with handle and mounting for cylinder
lock.
–1 x rear door, single, sheet steel, with handle
and mounting for cylinder lock.
– 1 x complete earthing set (VDE 0100).
– 4 x leveling feet.
How supplied
– Mounted.
Note
– Not available with double doors.
– Not available with bottom plates.
W
H
D
U
h
d
kg
Model
Order No.
UP
800
2000
800
42
1900
565
116
with side panels
01.136.280.X
1 unit
800
2200
800
47
2100
565
126
with side panels
01.136.281.X
1 unit
800
2000
900
42
1900
665
120
with side panels
01.136.286.X
1 unit
800
2200
900
47
2100
665
120
with side panels
01.136.287.X
1 unit
800
2000
800
42
1900
565
105
without side panels
01.136.306.X
1 unit
800
2000
900
42
1900
665
116
without side panels
01.136.312.X
1 unit
MIR20223
Mechanics – Racks | 65
Miracel® Network Rack
Knürr Miracel® 19" distribution rack, NS 19.8
Width 800, front glass door
–With fixed 19" component on the front
for IEC 297-3-compliant components.
–Flexible assembly of the built-in units with
T-slot.
– Cable entry via plinth and top cover.
–Cable entry on the top cover can be completely
removed at the rear allowing for installation and
removal of top cover after cabling.
–Dissipated heat discharge via raised fan top
cover.
–Top cover prepared for retrofitting CoolBlast®
fan units facilitating flexible adjustments in
accordance with customer requirements.
– Door opening angle, 180°.
Jumpering space
– Front 123 mm.
MIR20303
Load rating
– 5000 N static.
tN
Protection rating
– IP 40.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
–B
asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
–D
oors, sheet steel, powder-coated texture,
glass infill, front door, single safety-glass
panel.
–M
ultifunctional braces, sheet steel,
zinc-passivated.
MIR00607
MIR00607
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
(1 U = 44.45 mm)
UP = Packaging unit
66 | Mechanics – Racks
How supplied
– Mounted.
W
H
D
U
h
dU
kg
Model
Order No.
UP
1320
600
23
1052
435
78
glass door, side panel
01.135.001.1
1 unit
800
1920
600
37
1652
435
103
glass door, side panel
01.135.003.1
1 unit
800
2120
600
41
1852
435
112
glass door, side panel
01.135.004.1
1 unit
800
1320
800
23
1052
635
80
glass door, side panel
01.135.019.1
1 unit
800
1920
800
37
1652
635
111
glass door, side panel
01.135.021.1
1 unit
800
2120
800
41
1852
635
120
glass door, side panel
01.135.022.1
1 unit
800
1320
800
23
1052
635
80
double glass door, side panel
01.135.037.1
1 unit
800
1920
800
37
1652
635
111
double glass door, side panel
01.135.039.1
1 unit
800
2120
800
41
1852
635
120
double glass door, side panel
01.135.040.1
1 unit
800
2320
800
46
2052
635
121
double glass door, side panel
01.135.041.1
1 unit
Conversion:
U = Standard rack unit
Scope of delivery
– 1 x basic rack.
– 2 x 19" aluminum vertical extrusions with
T-slot and increment slide for M5 spring
nut.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 1 x raised fan top cover with cable entry
(three-piece sliding plates can also be
opened completely), prepared for
retrofitting CoolBlast® fan units.
– 1 x front door, single or double, single
safety-glass panel with handle and
mounting for cylinder lock.
– 1 x rear door, single or double, sheet steel,
with handle and mounting for cylinder
lock.
– 2 x side panels with quick connectors
(according to model).
– 1 x plinth for cable management on the side
and rear with leveling feet (0 - 25 mm).
– 2 x side plinth cover plates, closed
(according to model).
– 2 x plinth cover plates for front and rear,
with vent slots and mounting for filter mat.
– 1 x complete earthing set (VDE 0100).
800
Dimensions in mm:
W = Width
Color
– Visible surface of the covers,
RAL 7035 light-grey.
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Miracel® Network Rack
Knürr Miracel® 19" distribution rack, NS 19.6
Width 600, with front glass door
–With fixed 19" component on the front
for IEC 297-3-compliant components.
–Flexible assembly of the built-in units with
T-slot.
– Cable entry via plinth and top cover.
–Cable entry on the top cover can be completely
removed at the rear allowing for installation and
removal of top cover after cabling.
–Dissipated heat discharge via raised fan top
cover.
–Top cover prepared for retrofitting CoolBlast®
fan units facilitating flexible adjustments in
accordance with customer requirements.
– Door opening angle, 180°.
Jumpering space
– Front 123 mm.
MIR20304
Load rating
– 5000 N static.
tN
Protection rating
– IP 40.
MIR00056
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
–B
asic rack, extruded aluminum, polished.
–C
orner piece, die-cast aluminum, polished.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
–D
oors, sheet steel, powder-coated texture,
glass infill, front door, single safety-glass
panel, 4 mm.
–M
ultifunctional braces, sheet steel,
zinc-passivated.
Color
– Visible surface of the covers,
RAL 7035 light-grey.
Scope of delivery
– 1 x basic rack.
– 2 x 19" aluminum vertical extrusions with
T-slot and increment slide for M5 spring
nut.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 1 x raised fan top cover with cable entry
(three-piece sliding plates can also be
opened completely), prepared for
retrofitting CoolBlast® fan units.
– 1 x front door, single, single safety-glass panel
with handle and mounting for cylinder
lock.
–1 x rear door, single, sheet steel, with handle
and mounting for cylinder lock.
– 2 x side panels with quick connectors.
– 1 x plinth for cable management on the side
and rear with leveling feet (0 - 25 mm).
– 2 x side plinth cover plates, closed.
– 2 x plinth cover plates for front and rear,
with vent slots and mounting for filter mat.
– 1 x complete earthing set (VDE 0100).
How supplied
– Mounted.
W
H
D
U
h
iD
kg
Model
Order No.
UP
600
1320
600
23
1052
435
72
with side panel
01.135.109.1
1 unit
600
1920
600
37
1652
435
95
with side panel
01.135.111.1
1 unit
600
2120
600
41
1852
435
103
with side panel
01.135.112.1
1 unit
600
2320
600
46
2052
435
112
with side panel
01.135.113.1
1 unit
600
1320
800
23
1052
635
74
with side panel
01.135.127.1
1 unit
600
1920
800
37
1652
635
102
with side panel
01.135.129.1
1 unit
600
2120
800
41
1852
635
110
with side panel
01.135.130.1
1 unit
600
2320
800
46
2052
635
119
with side panel
01.135.131.1
1 unit
MIR00031
Mechanics – Racks | 67
Miracel® Network Rack
Miracel® 19" lab rack, NO 19
With 2 x 19" T-slot extrusions (basis for rack widths 600 / 700 / 800)
Material / Finish
– Basic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum.
– Multifunctional braces, sheet steel,
zinc-passivated.
–With fixed 19" component on the front
for IEC 297-3-compliant components.
–Flexible assembly of the built-in units with
T-slot.
Jumpering space
– Front 123 mm.
Load rating
– 5000 N static.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
Scope of delivery
– 1 x basic rack.
– 2 x 19" aluminum vertical extrusions with
T-slot and increment slide for M5 spring
nut.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 4 x leveling feet (0 - 25 mm).
How supplied
– Mounted.
tN
MIR20307
MIR00043a
MIR20002
W
H
D
U
h
iD
kg
Order No.
UP
600
1200
600
23
1052
435
14
01.135.793.3
1 unit
600
1800
600
37
1652
435
16
01.135.795.3
1 unit
600
2000
600
41
1852
435
17
01.135.796.3
1 unit
600
2200
600
46
2052
435
18
01.135.797.3
1 unit
600
1200
800
23
1052
635
16
01.135.817.3
1 unit
600
1800
800
37
1652
635
18
01.135.819.3
1 unit
600
2000
800
41
1852
635
19
01.135.820.3
1 unit
600
2200
800
46
2052
635
20
01.135.821.3
1 unit
600
1200
900
37
1652
735
19
01.135.842.0
1 unit
600
2000
900
41
1852
735
20
01.135.843.0
1 unit
600
2200
900
46
2052
735
21
01.135.844.0
1 unit
600
1800
1000
37
1652
835
20
01.133.600.0
1 unit
600
2000
1000
41
1852
835
21
01.133.610.0
1 unit
600
2200
1000
46
2052
835
22
01.133.620.0
1 unit
600
1800
1200
37
1652
1035
22
01.133.605.0
1 unit
600
2000
1200
41
1852
1035
23
01.133.615.0
1 unit
600
2200
1200
46
2052
1035
24
01.133.625.0
1 unit
700
1200
600
23
1052
435
15
01.135.799.3
1 unit
700
1800
600
37
1652
435
17
01.135.801.3
1 unit
700
2000
600
41
1852
435
18
01.135.802.3
1 unit
700
2200
600
46
2052
435
19
01.135.803.3
1 unit
700
1200
800
23
1052
635
17
01.135.823.3
1 unit
700
1800
800
37
1652
635
19
01.135.825.3
1 unit
700
2000
800
41
1852
635
20
01.135.826.3
1 unit
700
2200
800
46
2052
635
21
01.135.827.3
1 unit
700
1800
900
37
1652
735
19
01.133.630.0
1 unit
700
2000
900
41
1852
735
20
01.133.645.0
1 unit
700
2200
900
46
2052
735
22
01.133.660.0
1 unit
700
1800
1000
37
1652
835
21
01.133.635.0
1 unit
700
2000
1000
41
1852
835
22
01.133.650.0
1 unit
700
2200
1000
46
2052
835
23
01.133.665.0
1 unit
700
1800
1200
37
1652
1035
23
01.133.640.0
1 unit
700
2000
1200
41
1852
1035
24
01.133.655.0
1 unit
700
2200
1200
46
2052
1035
25
01.133.670.0
1 unit
Continued on next page!
68 | Mechanics – Racks
Miracel® Network Rack
W
H
D
U
h
iD
kg
Order No.
UP
800
1200
600
23
1052
435
16
01.135.805.3
1 unit
800
1800
600
37
1652
435
18
01.135.807.3
1 unit
800
2000
600
41
1852
435
19
01.135.808.3
1 unit
800
2200
600
46
2052
435
20
01.135.809.3
1 unit
800
1200
800
23
1052
635
18
01.135.829.3
1 unit
800
1800
800
37
1652
635
20
01.135.831.3
1 unit
800
2000
800
41
1852
635
21
01.135.832.3
1 unit
800
2200
800
46
2052
635
22
01.135.833.3
1 unit
800
1800
900
37
1652
735
21
01.135.847.0
1 unit
800
2000
900
41
1852
735
22
01.135.848.0
1 unit
800
2200
900
46
2052
735
23
01.135.849.0
1 unit
800
1800
1000
37
1652
835
20
01.133.675.0
1 unit
800
2000
1000
41
1852
835
22
01.133.685.0
1 unit
800
2200
1000
46
2052
835
24
01.133.695.0
1 unit
800
1800
1200
37
1652
1035
22
01.133.680.0
1 unit
800
2000
1200
41
1852
1035
24
01.133.690.0
1 unit
800
2200
1200
46
2052
1035
26
01.133.700.0
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
iD = Inside depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Racks | 69
Miracel® Network Rack
Knürr Miracel®
Without front door, width 600 mm
– With fixed 19" component on the front
and rear.
–Installation of chassis runners and
19" shelves available.
– For IEC 297-3-compliant components.
–For installing 19" components on the front
and rear.
–For installing equipment with a
max. width of 450 mm.
– Installation accessories.
Jumpering space
– Front 73 mm.
Load rating
– 5000 N static.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
MIR20309
Material / Finish
– Basic rack, extruded aluminum.
– Corner piece, die-cast aluminum.
–C
overs and trim extrusions, zinc-passivated
sheet steel, powder-coated texture.
–M
ultifunctional braces and 19" extrusions,
sheet steel, zinc-passivated.
H
D
U
h
d
kg
Order No.
UP
1200
600
23
1052
440
42
01.131.068.1
1 unit
600
1800
600
37
1652
440
57
01.131.071.1
1 unit
600
2000
600
41
1852
440
62
01.131.072.1
1 unit
600
2200
600
46
2052
440
66
01.131.073.1
1 unit
600
1200
800
23
1052
640
48
01.131.074.1
1 unit
600
1800
800
37
1652
640
63
01.131.077.1
1 unit
600
2000
800
41
1852
640
69
01.131.078.1
1 unit
600
2200
800
46
2052
640
75
01.131.079.1
1 unit
Dimensions in mm:
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
70 | Mechanics – Racks
How supplied
– Mounted.
W
MIR00540
h = Installation height
Scope of delivery
– 1 x basic rack.
– 4 x 19" sheet steel angular extrusions with
mounting holes.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 1 x cover, closed.
– 1 x rear panel with quick connectors.
– 2 x side panels with quick connectors.
– 2 x horizontal trim extrusions, front.
– 2 x vertical trim extrusions, front.
– 4 x leveling feet (0 - 25 mm).
600
MIR00540
W = Width
Color
– Basic rack, polished.
– Visible surface of the covers,
RAL 7035 light-grey.
– Trim extrusions: RAL 5008 grey-blue.
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Miracel® Network Rack
Knürr Miracel® IP 55, on request
With single glass door, width 600 mm
– With fixed 19" component on the front
and rear.
– For IEC 297-3-compliant components.
– Door opening angle, 180°.
–For installing 19" components on the front
and rear.
–For installation equipment with a max. width
of 450 mm.
–Installation accessories.
Jumpering space
– Front 73 mm.
Load rating
– 5000 N static.
MIR20336
Protection rating
– IP 55.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
–B
asic rack, extruded aluminum, polished.
–C
orner piece, die-cast aluminum, polished.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
–D
oors, sheet steel, powder-coated texture,
glass infill, front door, single safety-glass
panel, 4 mm.
–M
ultifunctional braces and
19" extrusions, sheet steel, zinc-passivated.
Color
– Visible surface of the covers,
RAL 7035 light-grey.
Scope of delivery
– 1 x basic rack.
– 4 x 19" sheet steel angular extrusions with
mounting holes.
– 2 x multifunctional braces for cable clamping
and universal mounting options.
– 1 x top cover, closed, IP 55.
– 1 x front door, single, single safety-glass panel,
with handle and mounting for cylinder
lock, IP55.
– 1 x rear panel with quick connectors, IP 55.
– 2 x side panels with quick connectors, IP 55.
– 1 x floor, closed, IP 55.
– 4 x leveling feet (0 - 25 mm).
How supplied
– Mounted.
Note on rack suites
To create a rack suite with "n" racks, the
following is required:
– (n-1) racks without side panels.
– 1 rack with side panels.
In a rack suite, per connection you will require
a set of BN 01.130.935.7 suite connectors.
W
H
D
U
h
d
kg
Order No.
UP
600
1800
600
37
1652
440
75
01.132.271.1
1 unit
600
2000
600
41
1852
440
80
01.132.272.1
1 unit
600
1800
800
37
1652
640
83
01.132.277.1
1 unit
600
2000
800
41
1852
640
90
01.132.278.1
1 unit
MIR00301
Mechanics – Racks | 71
Miracel® Network Rack
Miracel® sheet-steel door
with perforation, single
Miracel® sheet-steel door
with perforation, double
Material
– Sheet steel 1.0 mm.
Finish / Color
– Final digit of order number 1:
Powder-coated texture,
RAL 7035, light-grey.
– F inal digit of order number 8:
Powder-coated texture,
RAL 7021 dark-grey.
Finish / Color
– Final digit of order number 1:
Powder-coated texture,
RAL 7035, light-grey.
– Final digit of order number 8:
Powder-coated texture,
RAL 7021 dark-grey.
MIR20310
Material
– Sheet steel 1.0 mm.
Scope of delivery
– 1 x door.
– 1 x Mounting kit.
MIR20277
Volume flow
– Large surface perforation
(83 % free surface) enables optimum
airflow through out the rack.
Scope of delivery
– 1 x door.
– 1 x Mounting kit.
Volume flow
– Large surface perforation
(83 % free surface) enables optimum
airflow through out the rack.
W
H
Model
Order No.
UP
W
H
Model
Order No.
UP
600
1200
compl. door
01.147.400.X
1 unit
600
2000
double door
01.128.260.X
1 unit
700
1200
compl. door
01.147.401.X
1 unit
700
2000
double door
01.128.261.X
1 unit
800
1200
compl. door
01.147.402.X
1 unit
800
2000
double door
01.128.262.X
1 unit
600
1800
compl. door
01.147.412.X
1 unit
600
2200
double door
01.128.263.X
1 unit
700
1800
compl. door
01.147.413.X
1 unit
700
2200
double door
01.128.264.X
1 unit
800
2200
double door
01.128.265.X
1 unit
800
1800
compl. door
01.147.414.X
1 unit
600
2000
compl. door
01.147.416.X
1 unit
700
2000
compl. door
01.147.417.X
1 unit
800
2000
compl. door
01.147.418.X
1 unit
600
2200
compl. door
01.147.420.X
1 unit
700
2200
compl. door
01.147.421.X
1 unit
800
2200
compl. door
01.147.422.X
1 unit
Miracel® spare handle
swing handle, black
Door locking set
Scope of delivery
– 1 x lock set.
– 2 x keys (half-cylinder).
Material
– PA 6 UL 94 V-1.
Color
– Black.
Scope of delivery
– 1 x handle.
MIR20445
MIR20460
Order No.
UP
05.041.299.9
1 set
Scope of delivery
– 1 x key.
1 unit
Scope of delivery
– 2 x cylinders with 2 keys each.
– 2 x lockable fasteners for side panel with
2 keys each.
MIR00069
– MIR20461
72 | Mechanics – Racks
UP
01.137.017.9
Complete locking set
Spare key for door
Order No.
Order No.
UP
00.078.467.9
1 unit
Order No.
UP
01.130.940.9
1 set
Miracel® Network Rack
Knürr Miracel® glass door,
single and double
Knürr Miracel® sheet-steel door
single and double
Material
– Sheet steel 1.0 mm.
Material
– Sheet steel 1.0 mm.
– Single safety-glass panel,
4.0 mm clear glass.
– Double door 6.0 mm.
Finish / Color
– Order no. 1:
Powder-coated texture,
RAL 7035 light-grey.
– Order no. 8:
Powder-coated texture,
RAL 7021 dark-grey.
Finish / Color
– Order no. 1:
Powder-coated texture,
RAL 7035 light-grey.
–O
rder no. 8:
Powder-coated texture,
RAL 7021 dark-grey.
MIR20313
Protection rating
– Installation of IP 40 double doors in the
Miracel rack (depending on other rack
components), achieves a maximum
protection rating of IP 55.
MIR20311
Scope of delivery
– 1 x sheet-steel door.
– 1 x Mounting kit.
Scope of delivery
– 1 x glass door.
– 1 x Mounting kit.
How supplied
– Preassembled.
How supplied
– Preassembled.
MIR20314
Protection rating
– Installation of IP 20 double doors in the
Miracel® rack (depending on other rack
components), achieves a maximum
protection rating of IP 55.
MIR20312
W
H
U
Model
Order No.
UP
W
H
U
Model
Order No.
UP
600
1200
23
compl. door
01.147.440.X
1 unit
600
1200
23
compl. door
01.147.480.X
1 unit
700
1200
23
compl. door
01.147.441.X
1 unit
700
1200
23
compl. door
01.147.481.X
1 unit
800
1200
23
compl. door
01.147.442.X
1 unit
800
1200
23
compl. door
01.147.482.X
1 unit
600
1800
37
compl. door
01.147.452.X
1 unit
600
1800
37
compl. door
01.147.492.X
1 unit
700
1800
37
compl. door
01.147.453.X
1 unit
700
1800
37
compl. door
01.147.493.X
1 unit
800
1800
37
compl. door
01.147.454.X
1 unit
800
1800
37
compl. door
01.147.494.X
1 unit
600
2000
41
compl. door
01.147.456.X
1 unit
600
2000
41
compl. door
01.147.496.X
1 unit
700
2000
41
compl. door
01.147.457.X
1 unit
700
2000
41
compl. door
01.147.497.X
1 unit
800
2000
41
compl. door
01.147.458.X
1 unit
800
2000
41
compl. door
01.147.498.X
1 unit
600
2200
46
compl. door
01.147.460.X
1 unit
600
2200
46
compl. door
01.147.500.X
1 unit
700
2200
46
compl. door
01.147.461.X
1 unit
700
2200
46
compl. door
01.147.501.X
1 unit
800
2200
46
compl. door
01.147.462.X
1 unit
800
2200
46
compl. door
01.147.502.X
1 unit
600
1200
23
double door, steel
01.131.820.1
1 unit
600
1200
23
double door, glass
01.131.850.1
1 unit
700
1200
23
double door, steel
01.131.821.1
1 unit
700
1200
23
double door, glass
01.131.851.1
1 unit
800
1200
23
double door, steel
01.131.822.1
1 unit
800
1200
23
double door, glass
01.131.852.1
1 unit
600
1800
37
double door, steel
01.131.835.1
1 unit
600
1800
37
double door, glass
01.131.862.1
1 unit
700
1800
37
double door, steel
01.131.836.1
1 unit
700
1800
37
double door, glass
01.131.863.1
1 unit
800
1800
37
double door, steel
01.131.837.1
1 unit
800
1800
37
double door, glass
01.131.864.1
1 unit
600
2000
41
double door, steel
01.131.840.1
1 unit
600
2000
41
double door, glass
01.131.866.1
1 unit
700
2000
41
double door, steel
01.131.841.1
1 unit
700
2000
41
double door, glass
01.131.867.1
1 unit
800
2000
41
double door, steel
01.131.842.1
1 unit
800
2000
41
double door, glass
01.131.868.1
1 unit
600
2200
46
double door, steel
01.131.845.1
1 unit
600
2200
46
double door, glass
01.131.870.1
1 unit
700
2200
46
double door, steel
01.131.846.1
1 unit
700
2200
46
double door, glass
01.131.871.1
1 unit
800
2200
46
double door, steel
01.131.847.1
1 unit
800
2200
46
double door, glass
01.131.872.1
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Racks | 73
Miracel® Network Rack
Miracel® top cover
Closed, IP55
Miracel® top cover
with lateral cable entry
–Can be optionally used as top cover or
bottom cover (combination with
stationary plinth is not possible with us
as bottom cover).
MIR00070
– With lateral cable entry on both sides
(sliding plates).
–For orderly cable management in the
rack.
MIR20439
Protection rating
– Installation in the Miracel rack
(depending on other rack components),
achieves a maximum protection rating
of IP 55.
Finish
– Powder-coated texture, RAL 7035.
Scope of delivery
– 1 x cover, closed.
– 1 x Mounting kit.
Material
– Sheet steel 1.5 mm.
Finish / Color
– Final digit of order number 1:
Powder-coated texture,
RAL 7035, light-grey.
– Final digit of order number 8:
Powder-coated texture,
RAL 7021 dark-grey.
How supplied
– In sets.
Scope of delivery
– 1 x top cover with lateral cable entry.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
600
01.130.690.1
1 unit
W
D
For rack type
Order No.
UP
600
800
01.130.691.1
1 unit
600
1000
Miracel®
01.130.630.X-003
1 unit
600
900
01.130.692.1
1 unit
600
1100
Miracel®
01.130.630.X-004
1 unit
600
1000
01.127.700.1
1 unit
600
1200
Miracel®
01.130.630.X-005
1 unit
600
1200
01.133.760.1
1 unit
700
600
01.130.694.1
1 unit
800
1000
Miracel®
01.130.630.X-008
1 unit
700
800
01.130.695.1
1 unit
800
1100
Miracel®
01.130.630.X-009
1 unit
700
900
01.130.696.1
1 unit
800
1200
Miracel®
01.130.630.X-010
1 unit
700
1000
01.127.701.1
1 unit
700
1200
01.133.761.1
1 unit
800
600
01.130.691.1
1 unit
800
800
01.130.699.1
1 unit
800
900
01.130.700.1
1 unit
800
1000
01.127.702.1
1 unit
800
1200
01.133.762.1
1 unit
Miracel® top cover
short
– For covering the front area
of the top; the rest remains open.
–Facilitates unobstructed cable entry
in the rack.
MIR20441
Miracel® brush strip
Finish / Color
– Final digit of order number 1:
Powder-coated texture,
RAL 7035, light-grey.
– Final digit of order number 8:
Powder-coated texture,
RAL 7021 dark-grey.
–Brush strip for all covers with cable entry.
–For dust-protected and flexible cable
entry.
–Can be used instead of mounting the
sliding covers in the top cover.
MIR20093
MIR20440
Scope of delivery
– 2 x brush strips.
Material
– Sheet steel 1.5 mm.
How supplied
– In sets.
Scope of delivery
– 1 x cover, short.
– 1 x Mounting kit.
How supplied
– In sets.
Model
Order No.
UP
For rack width 700 / 800
01.130.999.9
2 units
BRack
L
For rack type
Order No.
UP
For rack width 600
01.130.998.9
2 units
600
250
Miracel®
01.130.628.X
1 unit
800
250
Miracel®
01.130.629.X
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
74 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Miracel® Network Rack
Miracel® side panel
Miracel® rear panel
Protection rating
– Installation with in the Miracel rack
(depending on other rack components)
achieves a maximum protection rating
of IP 55.
Material
– Sheet steel 1.0 mm.
Finish / Color
– Order no. 1:
Powder-coated texture,
RAL 7035 light-grey.
–O
rder no. 8:
Powder-coated texture,
RAL 7021 dark-grey.
Material
– Sheet steel 1.0 mm.
Finish / Color
– Order no. 1:
Powder-coated texture,
RAL 7035 light-grey.
– Order no. 8:
Powder-coated texture,
RAL 7021 dark-grey.
MIR00064
Protection rating
– Installation with in the Miracel rack
(depending on other rack components)
achieves a maximum protection rating
of IP 55.
MIR00064
Scope of delivery
– 1 x side panel.
– 1 x Mounting kit.
Scope of delivery
– 1 x rear panel.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
H
D
U
Order No.
UP
W
H
U
Order No.
UP
1200
600
23
01.130.643.X
1 unit
600
1200
23
01.130.662.X
1 unit
1200
800
23
01.130.649.X
1 unit
600
1800
37
01.130.665.X
1 unit
1200
900
23
01.130.655.X
1 unit
600
2000
41
01.130.666.X
1 unit
600
2200
46
01.130.667.X
1 unit
1800
600
37
01.130.646.X
1 unit
1800
800
37
01.130.652.X
1 unit
2000
600
41
01.130.647.X
1 unit
700
1200
23
01.130.668.X
1 unit
2000
800
41
01.130.653.X
1 unit
700
1800
37
01.130.671.X
1 unit
2000
900
41
01.130.659.X
1 unit
700
2000
41
01.130.672.X
1 unit
2000
1000
41
01.127.739.X
1 unit
700
2200
46
01.130.673.X
1 unit
2000
1200
41
01.128.874.X
1 unit
2200
600
46
01.130.648.X
1 unit
800
1200
23
01.130.674.X
1 unit
2200
800
46
01.130.654.X
1 unit
800
1800
37
01.130.677.X
1 unit
2200
900
46
01.130.660.X
1 unit
800
2000
41
01.130.678.X
1 unit
2200
1000
46
01.127.740.X
1 unit
800
2200
46
01.130.679.X
1 unit
2200
1200
46
01.128.875.X
1 unit
Miracel® assembly kit
Knürr Miracel quick connectors
Side panel threaded connection
®
For side and rear panels
–Used to screw on the side walls
instead of quick connectors.
– Renders rack more sturdy.
–Covers can be secured quickly
by rotating the locks 90°.
–Easy to turn with wide flat-head
screwdriver.
MIR20331
Material / Color
– Final digit of order number 1:
Polyamide PA66, RAL 7035, light-grey.
– F inal digit of order number 9:
Polyamide PA66, RAL 9011, dark-grey.
How supplied
– Sets of 50 units.
MIR00318
Material
– Countersunk washers and mounting
nuts, stainless steel.
Scope of delivery (for 2 side panels)
– 16 x countersunk washers.
– 16 x mounting nuts, M5.
– 16 x countersunk screws, M5 x 12.
How supplied
– In sets.
Model
Order No.
UP
for side panel RAL 7035
01.133.900.1
1 set
Order No.
UP
for side panel RAL 9011
01.133.900.9
1 set
01.130.937.9
1 set
for rear panel RAL 7035
01.133.910.1
1 set
for rear panel RAL 9011
01.133.910.9
1 set
Mechanics – Racks | 75
Miracel® Network Rack
Miracel® locking set
for side or rear panel
Miracel® plinth
Fixed, height 100 mm
– For installation in the side or rear panel.
For protection against unauthorized
access.
– Can be retrofitted.
–Stationary.
– Cable entry possible from all sides.
–Cover plate front and rear with vent slots
and installation option for filter mat.
MIR00414
Scope of delivery
– 1 x lockable fastener.
– 2 x keys.
MIR00068
How supplied
– In sets.
Order No.
UP
01.130.938.9
1 set
MIR00076
Scope of delivery
– 4 x plinth corners with leveling.
– 2 x plinth cover plates with slots.
– 2 x plinth cover plates closed on the
side.
– 1 x Mounting kit.
W
H
D
Order No.
UP
600
100
600
01.130.538.1
1 unit
800
01.130.539.1
1 unit
900
01.130.540.1
1 unit
Material
– Sheet steel.
600
100
1000
01.127.650.1
1 unit
600
100
1200
01.133.710.1
1 unit
700
100
600
01.130.544.1
1 unit
700
100
800
01.130.545.1
1 unit
700
100
900
01.130.546.1
1 unit
700
100
1000
01.127.651.1
1 unit
Scope of delivery
– 4 x plinth corners, incl. leveling feet.
– 8 x cover plates.
– 1 x Mounting kit.
700
100
1200
01.133.711.1
1 unit
800
100
600
01.130.550.1
1 unit
How supplied
– In sets.
800
100
800
01.130.551.1
1 unit
800
100
900
01.130.552.1
1 unit
D
Order No.
UP
01.130.958.1
1 unit
600
200
800
01.130.959.1
1 unit
600
200
900
01.130.960.1
1 unit
600
200
1000
01.130.961.1
1 unit
600
200
1200
01.130.963.1
1 unit
800
200
600
01.130.970.1
1 unit
800
200
800
01.130.971.1
1 unit
800
200
900
01.130.972.1
1 unit
800
200
1000
01.130.973.1
1 unit
800
200
1200
01.130.975.1
1 unit
Dimensions in mm:
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
76 | Mechanics – Racks
How supplied
– In sets.
100
600
L = Length
100
H
d = Insertion depth
Finish
– Powder-coated texture, RAL 7035.
600
200
D = Depth
600
W
H = Height
Material
– Sheet steel.
Load rating
– 3000 N static.
600
h = Installation height
Finish
– Powder-coated texture, RAL 7035.
W = Width
Load rating
– 5000 N static.
Miracel® plinth
Fixed, height 200 mm
– Stationary included leveling options.
– Cable entry possible from all sides.
–Cover plate front and rear with vent slots
and installation option for filter mat.
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
800
100
1000
01.127.652.1
1 unit
800
100
1200
01.133.712.1
1 unit
Miracel® plinth trim
with brush strip
–For cable entry on the side,
front and rear.
MIR00521
Finish
– Powder-coated texture, RAL 7035.
Scope of delivery
– 1 x plinth cover plate with brush strip.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
600
01.130.744.1
1 unit
800
800
01.130.745.1
1 unit
Miracel® Network Rack
Miracel® filter mat
Side plinth,
cover plate closed
for plinth cover plate for installation in
plinth cover plate at the front and rear
– Suitable for plinth height of 100 mm.
– Cover plates, closed.
Scope of delivery
– 2 x filter mats.
How supplied
– In sets.
W
Order No.
UP
600
01.130.530.9
2 units
700
01.130.531.9
2 units
800
01.130.532.9
2 units
Miracel® plinth
Mobile, height 100 mm
MIR00077
Material
– Sheet steel.
Finish
– Powder-coated texture, RAL 7035.
Scope of delivery
– 1 x plinth cover plate.
– 1 x Mounting kit.
How supplied
– In sets.
H
D
Order No.
UP
100
600
01.139.697.1
1 unit
– Cable entry possible at the rear.
–With leveling feet for fixed model.
100
800
01.139.698.1
1 unit
100
900
01.139.699.1
1 unit
Load rating
– 3000 N static.
100
1000
01.139.699.1-001
1 unit
100
1200
01.139.699.1-003
1 unit
Material
– Sheet steel 2 mm.
Miracel® bottom plate
Finish
– Powder-coated texture, RAL 7035.
W
H
D
Scope of delivery
– 1 x plinth frame.
– 2 x fixed casters with snib.
– 2 x swivel casters.
– 4 x leveling feet.
– 1 x Mounting kit.
For flexible cable entry
with rubber seal, IP 40
– For covering the rack underside.
–With rubber seal for flexible cable entry
at the front or rear.
MIR00355
How supplied
– In sets.
Order No.
UP
600
100
600
01.130.561.1
1 unit
600
100
800
01.130.562.1
1 unit
600
100
900
01.130.563.1
1 unit
600
100
1000
01.127.250.1
1 unit
600
100
1200
01.133.715.1
1 unit
700
100
600
01.130.565.1
1 unit
Material / Finish
– Sheet steel, 1.5 mm, electroplated zinc.
– Sponge rubber, 50 mm x 50 mm.
Scope of delivery
– 1 x cable entry.
– 2 x bottom plates.
– 2 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
700
100
800
01.130.566.1
1 unit
W
D
Order No.
UP
700
100
1000
01.127.253.1
1 unit
600
600
01.130.732.0
1 unit
700
100
1200
01.133.716.1
1 unit
600
800
01.130.733.0
1 unit
800
100
600
01.130.569.1
1 unit
600
900
01.130.734.0
1 unit
800
100
800
01.130.570.1
1 unit
600
1000
01.127.670.0
1 unit
800
100
900
01.130.571.1
1 unit
600
1200
01.133.740.0
1 unit
800
100
1000
01.127.254.1
1 unit
700
600
01.130.735.0
1 unit
800
100
1200
01.133.717.1
1 unit
700
800
01.130.736.0
1 unit
700
900
01.127.671.0
1 unit
700
1000
01.127.672.0
1 unit
700
1200
01.133.741.0
1 unit
800
600
01.130.738.0
1 unit
800
800
01.130.739.0
1 unit
800
900
01.130.740.0
1 unit
800
1000
01.127.673.0
1 unit
800
1200
01.133.742.0
1 unit
Mechanics – Racks | 77
Miracel® Network Rack
Miracel® bottom plate
3-piece
Miracel® casters
– For covering the rack underside.
–For flexible cable entry
front and rear.
MIR00357
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated.
–Can be mounted on the threaded eyelet
of the basic rack.
– Caster diameter, 75 mm.
– Threaded bolt, M12.
– Load capacity per caster: 100 kg
MIR20088
Scope of delivery
– 3 x bottom plates.
– 2 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
600
01.130.750.0
1 unit
600
800
01.130.751.0
1 unit
600
900
01.130.752.0
1 unit
600
1000
01.127.660.0
1 unit
600
1200
01.133.730.0
1 unit
700
600
01.130.753.0
1 unit
700
800
01.130.754.0
1 unit
700
900
01.130.755.0
1 unit
700
1000
01.127.662.0
1 unit
700
1200
01.133.731.0
1 unit
800
600
01.130.756.0
1 unit
800
800
01.130.757.0
1 unit
Scope of delivery
– 4 x swivel casters.
How supplied
– In sets.
H
Order No.
UP
109.5
05.031.057.9
4 units
Assembly kit
for securing bottom plate
Material
– Sheet steel 3.0 mm.
Finish
– Galvanized.
Scope of delivery
– 4 x clamping plates.
MIR00319
800
900
01.130.758.0
1 unit
Order No.
UP
800
1000
01.127.663.0
1 unit
01.130.934.7
4 units
800
1200
01.133.732.0
1 unit
Front cover plate (pivots)
Bottom plate, perforated
–For covering the side
clearance space at the front of the
800-width Miracel racks.
– Easy to open for cable management..
– For vented racks.
–Replacement for segmented bottom
plates.
MIR20462
Material / Finish
Sheet steel, 1.0 mm,
powder-coated texture.
Material / Finish
– Sheet steel, 1.5 mm,
electroplated zinc.
ELM00103a
Color
– Final digit of order number 1:
RAL 7035 light-grey.
– Final digit of order number 8:
RAL 7021 dark-grey.
Scope of delivery
– 1 x bottom plate.
How supplied
– In sets.
W
Order No.
UP
600
01.139.628.0
1 unit
700
01.139.629.0
1 unit
800
01.139.630.0
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
78 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Scope of delivery
– 2 x front cover plates.
– 1 x Mounting kit.
How supplied
– In sets.
H
U
Model
Order No.
UP
1003
23
For rack width 800
01.113.044.X
2 units
1803
41
For rack width 800
01.113.048.X
2 units
2002
46
For rack width 800
01.113.049.X
2 units
Miracel® Network Rack
Miracel® vertical extrusion,
ETSI 20 module / 21"
Miracel® 19" vertical extrusion
aluminum with T-slot and increment slide
–For front and rear installation with
in the rack.
–Spring nut, variable and adjustable,
in U increments (19").
–Please order suitable assembly kit
for rack widths 700 / 800.
–Screws and spring nuts for W 600.
MIR00307
MIR00308
Type
Material
– Extruded aluminum, polished.
– For metric racks, 20 module 21".
–Spring nut, variable and
adjustable in standard increments.
–Please order suitable assembly kit
for rack widths 700 / 800.
–Screws and spring nuts for W 600.
Scope of delivery
– 2 x vertical extrusions with increment
slide.
H
U
h
Order No.
UP
1200
23
1100
01.130.828.0
2 units
1800
37
1700
01.130.834.0
2 units
MIR00311
Material
– Type 1: Extruded aluminum, polished.
– Type 2: Sheet steel, 1.5 mm,
zinc-passivated.
Scope of delivery
– 2 x vertical extrusions.
Type 2
2000
41
1900
01.130.835.0
2 units
H
Module h
Model
Order No.
UP
2200
46
2100
01.130.836.0
2 units
1800
66
alu. T-slot
01.130.847.0
2 units
Miracel® 19" vertical extrusion,
steel with mounting holes
–For front and rear installation with
in the rack.
–Caged nut mountable in U increments (19").
–Please order suitable assembly kit
for rack widths 700 / 800.
–Screws and spring nuts for W 600.
MIR00309
H
U
2000
74
1900
alu. T-slot
01.130.848.0
2 units
2200
82
2100
alu. T-slot
01.130.849.0
2 units
1800
66
1700
steel mount. holes
01.130.822.0
2 units
2000
74
1900
steel mount. holes
01.130.823.0
2 units
2200
82
2100
steel mount. holes
01.130.824.0
2 units
Miracel® U tape measure
Material
– Sheet steel, 1.5 mm, zinc passivated.
Scope of delivery
– 2 x vertical extrusions with mounting
holes.
h
Order No.
1700
LUF20337
UP
– For sticking on Miracel® 19" extrusions.
–Enables fast component positioning at
the correct U position.
–Standard length, 48 U; shorten as
required.
Scope of delivery
– 1 x tape measure.
1200
23
1100
01.130.803.0
2 units
1800
37
1700
01.130.809.0
2 units
U
Order No.
UP
2000
41
1900
01.130.810.0
2 units
48
01.128.400.9
1 unit
2200
46
2100
01.130.811.0
2 units
Miracel® mounting adapters
for 19" server extrusion
Miracel 19" server extrusion,
steel with mounting holes
®
–For mounting trade-standard
19" servers.
–Please order suitable assembly kit
for rack widths 700 / 800.
–Please order mounting adapter for
Knürr standard components.
MIR20041
Material
– Sheet steel, 2 mm, zinc passivated.
Scope of delivery
– 4 x 19" server extrusions.
H
U
Order No.
UP
2000
41
01.127.214.0
4 units
2200
46
01.127.215.0
4 units
–For mounting standard Knürr
components (storage shelves, drawers,
chassis rails, keyboard tray, etc.)
in 19" installation space.
MIR20044
Material
– Zinc-passivated sheet steel.
Scope of delivery
– 4 x adapters.
U
Order No.
UP
1
01.127.119.9
4 units
Mechanics – Racks | 79
Miracel® Network Rack
Miracel® assembly kits
for extrusions
Earthing set / door
Side panel / rear panel
–For safe earthing of doors and
panels.
Scope of delivery
– 4 x node brackets (full-length).
– 2 x node brackets (short).
– 2 x Z brackets (short).
– 1 x Mounting kit.
MIR00216
MIR00510
W
Model
Order No.
UP
700
short
01.131.219.7
1 set
800
short
01.131.221.7
1 set
Scope of delivery
– 1 x earthing connection.
– 1 x Mounting kit.
How supplied
– In sets.
Model
Order No.
UP
for single steel / glass doors
01.130.624.9
1 set
700
full-length
01.131.220.7
1 set
for side and rear panel
01.133.745.9
1 set
800
full-length
01.131.222.7
1 set
for steel double doors
01.139.540.9
1 set
for glass doors or perforated double doors
01.139.541.9
1 set
Multifunctional brace
Rack earthing set
–For routing cables
with cable ties.
For universal mounting option.
–
–Holes for mounting caged nuts.
–Distance between two multifunctional
braces can be selected using T-slot.
–Installation on the extrusions of the rack
frame or on the 19” extrusions, diagonal
and lateral.
MIR00089
Pos. 2
Pos.1
Pos. 3
Pos. 4
MIR88003
DRack
d
Installation positions
– 1 toward rear of basic frame.
– 2 across width of basic frame.
– 3 across width of 19" extrusions.
– 4 toward rear of 19" extrusions.
Material
– Sheet steel 1.5 mm.
– For safe earthing of rack.
–Standardized protective conductor
connection.
MIR00217
Standards
– IEC 950.
– VDE 0100.
Scope of delivery
– 5 x earthing connections.
– 1 x Mounting kit.
How supplied
– In sets.
Finish
– Zinc-passivated.
Scope of delivery
– 4 x multifunctional braces.
How supplied
– In sets.
Installation position For rack type
Order No.
600
1
Miracel
05.040.160.9 4 units
800
1
Miracel
05.040.161.9 4 units
900
1
Miracel
05.040.162.9 4 units
1000
1
Miracel
05.040.163.9 4 units
1100
1
Miracel
05.040.164.9 4 units
1200
1
Miracel
05.040.165.9 4 units
600
2
Miracel/Smaract
05.040.173.9 4 units
800
2
Miracel
05.040.174.9 4 units
3
Miracel/Smaract/DPR
05.040.175.9 4 units
Order No.
UP
01.130.529.9
1 set
UP
600
365
4
Miracel/Smaract
05.040.168.9 4 units
800
565
4
Miracel/Smaract
05.040.169.9 4 units
600
440
4
Miracel/Smaract
05.040.170.9 4 units
800
640
4
Miracel/Smaract
05.040.171.9 4 units
Dimensions in mm:
900
740
4
Miracel/Smaract
05.040.172.9 4 units
W = Width
h = Installation height
1000
740
4
Miracel/Smaract
05.040.172.9 4 units
H = Height
d = Insertion depth
D = Depth
L = Length
80 | Mechanics – Racks
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Miracel® Network Rack
Miracel® partition wall
can be retrofitted
– For air containment between two fixed
adjacent racks.
–The partition wall is fitted between two
racks and can be inserted from one side of
the linking racks; guided along the upper
rear-enclosure extrusion of one of the
linked racks.
–After the partition wall has been inserted,
fasteners are bent or welded on one side
of the wall and screwed into the vertical
T-slot to secure the structure. The rack
connectors included in the supply are
used on the opposite side.
MIR20452
Miracel® partition wall
mounted, fixed
– For air containment between two fixed
adjacent racks.
–The partition wall is mounted on only one
rack. It must be mounted before the other
racks are installed.
–The partition wall is slotted in at the top
of the rear extrusion and mounted to the
basic rack with quick connectors. The rack
connectors are then fitted to the top and
bottom of the frame extrusions from the
inside.
–Plastic cover extrusions are provided to
seal the gap between two racks. These
can be clipped into place at the front and
back of the gap.
MIR20450
Material
– Sheet steel 1.0 mm.
Finish / Color
– Powder-coated texture,
RAL 7035 light-grey.
Scope of delivery
– 1 x partitioning wall for retrofitting.
– 1 x set of rack connectors.
– 1 x Mounting kit.
How supplied
– In sets.
MIR20453
Material
– Sheet steel 1.0 mm.
Finish / Color
– Powder-coated texture,
RAL 7035 light-grey.
Scope of delivery
– 1 x fixed partition wall.
– 1 x set of rack connectors.
– 2 x cover extrusions.
– 1 x Mounting kit.
How supplied
– In sets.
H
D
Order No.
UP
2000
1000
01.133.835.1
1 unit
H
D
Order No.
UP
2000
1200
01.133.837.1
1 unit
2000
1000
01.133.860.1
1 unit
2000
1200
01.133.862.1
1 unit
2200
1000
01.133.838.1
1 unit
2200
1200
01.133.840.1
1 unit
2200
1000
01.133.863.1
1 unit
2200
1200
01.133.865.1
1 unit
Rack connector
Internal mounting
Miracel® rack connector
External mounting
–For mechanical, stable joining of
of rack and enclosure suites.
MIR00100
Material / Finish
– Sheet steel, 2 mm, zinc passivated.
Installation positions
– 1. O
n the horizontal extrusion
(bottom and top; front and rear).
– 2. V
ertically on the vertical extrusion
(front and rear; top and bottom).
2
1
–For secure connection of several racks.
–Front and rear external mounting.
Material
– Sheet steel, 1 mm, electroplated zinc.
Scope of delivery
– 6 x mounting straps.
– 1 x Mounting kit.
MIR20465
Scope of delivery
–8xm
ounting brackets (for connecting
2 racks / frames).
– 1x Mounting kit.
MIR20442
How supplied
– In sets.
MIR20463
Note
Only use on racks without partition walls.
Order No.
UP
01.130.935.7
1 set
Order No.
UP
01.127.114.9
1 set
Mechanics – Racks | 81
Miracel® Network Rack
Miracel® cover extrusion
for rack suites, IP 20
Material
– PVC extruder cover, black.
Scope of delivery
– 2 x vertical lengths.
– 2 x depth lengths.
Miracel®
Cover screws
MIR20447
Material
– Plastic.
How supplied
– Sets of 4 units.
Order No.
UP
01.131.751.9
4 units
Miracel®
Spacer bolt
MIR00320
–M12 bolts.
MIR20464
Scope of delivery
– Set of 4 units spacer bolt.
MIR20443
H
D
U
Order No.
Order No.
UP
01.131.752.7
4 units
UP
1200
600
23
01.131.270.9
1 set
1800
600
37
01.131.273.9
1 set
2000
600
41
01.131.274.9
1 set
2200
600
46
01.131.275.9
1 set
1200
800
23
01.131.276.9
1 set
1800
800
37
01.131.279.9
1 set
2000
800
41
01.131.280.9
1 set
2200
800
46
01.131.281.9
1 set
1200
900
23
01.131.282.9
1 set
1800
900
37
01.131.285.9
1 set
2000
900
41
01.131.286.9
1 set
2200
900
46
01.131.287.9
1 set
2000
1000
41
01.127.760.9
1 set
2200
1000
46
01.127.761.9
1 set
2000
1200
41
01.127.762.9
1 set
2200
1200
46
01.127.763.9
1 set
Miracel®
Crane eyes
–For hanging on crane hooks.
–The crane eyes are screwed into the
threads provided on the basic frame.
Load rating
– Max. 6,800 N.
Material
– Tool steel, forged.
Scope of delivery
– 4 x ring bolts.
– 4 x washers.
How supplied
– In sets.
MEC00074
MEC20194
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
82 | Mechanics – Racks
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Order No.
UP
01.131.745.9
1 set
Miracel® Network Rack
Mounting bracket
Fixed
– Sits flush ("airtight").
– Even load distribution on base.
– Also compatible with DCM racks.
DCM20090
Load rating
– 15,000 N static.
Material
– Sheet steel 3.0 mm.
Finish
– Order no. 1:
Powder-coated texture,
RAL 7035 light-grey.
–O
rder no. 8:
Powder-coated texture,
RAL 7021 dark-grey.
MIR20449
Scope of delivery
– 2 x mounting brackets for the depth.
– 2 x mounting brackets for the width.
– 1x Mounting kit.
How supplied
– In sets.
W
H
D
Order No.
UP
600
27
600
01.147.509.X
1 unit
600
27
700
01.147.510.X
1 unit
600
27
800
01.147.511.X
1 unit
600
27
900
01.147.512.X
1 unit
600
27
1000
01.147.513.X
1 unit
600
27
1100
01.147.514.X
1 unit
600
27
1200
01.147.515.X
1 unit
700
27
600
01.147.517.X
1 unit
700
27
700
01.147.518.X
1 unit
700
27
800
01.147.519.X
1 unit
700
27
900
01.147.520.X
1 unit
700
27
1000
01.147.521.X
1 unit
700
27
1100
01.147.522.X
1 unit
700
27
1200
01.147.523.X
1 unit
800
27
600
01.147.525.X
1 unit
800
27
700
01.147.526.X
1 unit
800
27
800
01.147.527.X
1 unit
800
27
900
01.147.528.X
1 unit
800
27
1000
01.147.529.X
1 unit
800
27
1100
01.147.530.X
1 unit
800
27
1200
01.147.531.X
1 unit
Mechanics – Racks | 83
Knürr @lock systems
@Lock – solutions for racks
Access control for data centers and technical rooms
Data centers are broken into on a regular basis. In many cases, the
intention is simply to steal high-quality IT equipment. However, breaking
in may only be a pretense for stealing data and/or putting in place a
man-in-the-middle infrastructure.
On 28 February 2011 for example, an important data center belonging to a
global telecommunications service provider was paralyzed by intruders. Only a
few weeks previously, a DC service provider working on behalf of a major health
care company became the victim of an attempted break-in, which resulted in
the entire security concept undergoing a TÜV audit. Generally speaking, attacks
of this kind go undetected. Data centers are security areas and therefore need
to be secured through various measures. An important part of this is controlling
access to and in the data center.
Controlling access to the data center is usually achieved through a combination
of organizational measures, e.g., gates and turnstiles, besides a building access
control system.
Working with various partners, Emerson Network Power has developed system
concepts which not only improve physical security through access controls
within the data center but also simplify operative processes, making them less
susceptible to errors. These concepts are known as "@Lock".
@lock solution with MLR handles in a co-location datacenter
84 | Accessories
Knürr @lock systems
Knürr @lock systems
Option 1: Transponder card system
@Lock "transponder card system" concept
This system concept can be applied
throughout – from the DC and cold aisle
doors to the individual cabinets. In addition
to the card readers and handles, the
extensive "Administration Suite" management software is a key part of the system.
Thanks to its modular design and open infra­
structure architecture, the new Administration
Suite can be expanded as required and can also
be implemented for third party providers.
Encrypted data communication between the
hardware, server and client.
Runs on Windows 2000, Windows XP, Windows
Vista, Windows Server 2003, Windows Server
2008, Citrix.
Allows administration of various users with
different types of authorization.
Client/server capability.
Web client-capable, SNMP alarming.
Record changes made to the system by users.
Straightforward user guidance in spite of
extensive tools.
Wide range of alarm messages.
Automatic alarm notification via e-mail.
Centralized locking plans and access
management.
Freely selectable four-eyes-principle.
Support for the most common transponder
types.
Central management of various systems.
Records all actions in "Log Events".
Free replacement of the lock system if the
authorizing medium is lost.
Real-time visualization of the swing handle
stations.
Configuration of special days with different
locking regimes.
Allocation of time profiles for access.
Able to export "Log Events".
Multilingual software.
Administration Suite 2.0
Order number: 01.180.049.9
MLR 3000 and MLR 5000 handles are suitable
for linking server or network cabinets to
the transporter card system. The E-LINE, by
Dirak mechatronic swing handles and the
Administration Suite software, provide a
convenient, reliable way of monitoring
access to your data or server cabinet. With
the Administration Suite software, security
officers can conveniently monitor and
manage access directly from a PC.
The integrated LEDs display alarm messages
and types of authorization on the handle itself.
As a result, technicians on site are given the same
information that the Administration Suite software
sends to the headquarters. LEDs at the top and
bottom of the handle offer permanently high
luminosity with low power consumption. As a
result, the lock status can be determined quickly,
even from a distance of several meters.
86 | Accessories
The top LED can indicate various statuses, such as
that the handle is ready to be opened or locked.
The bottom LED displays whether the handle is
within or outside the temperature range for the
cabinet selected by the customer. As a result,
irregularities may be identified quickly, leaving
enough time for appropriate action to be taken.
The information display integrated into the handle
is backlit and allows customer-specific information, such as the cabinet row, cabinet number etc.,
to be added for extra clarity.
Handles are also available with integrated
Keypad (MLR5000KP). They can be used with
either keycard, keypad or both (two-factorauthentification).
Knürr @lock systems
@LockMLR3000
@LockMLR5000
Technical data – @Lock MLR3000/5000
Handle electronics
Two-part hardware design
Swing handle and reader unit
Visualization
Multicolored status LED
Reader
For 125 kHz transponders (HID 26 bit system), alternatively 13.56 MHz (MIFARE)
Reader
Housing
Reader unit in plastic housing can be fixed with screws or self-adhesive pad
Power supply
12 V ± 10 % (DC) via low voltage socket
Standby current (system ready)
40 mA (DC)
Max. current consumption (with connector tightening)
440 mA (DC)
RS232 interface for MLR3000
RS232 cable (RXD, TXD, GND, Reader present, PC present), 38,400 baud
Current increase for MLR5000 via Ethernet interface
125 mA (DC)
TCP/IP interface
Ethernet, 10100 Autosense, up to 100 Mbaud
Connecting cable (reader - handle electronics)
8-pole, 350 cm, UL stranded wire AWG 26, one side with gated RJ45 plug, one side with crimped JST ZH connector ZHR-8
Relay output (via screw clamps)
2.5 mm2, can be screwed in from plug side, relay contact: 12 V, 3 A, 60 W, 120
Door contact input (via screw clamps)
2.5 mm2, can be screwed in from plug side, terminals 1 and 2
RS485 interface
RS485 cable to the E-LINE by DIRAK Gateway, (+/A, -/B), 38,400 baud
Memory capacity for transponder cards
2000 + 1 master transponder
Memory capacity for events
500 (ring memory)
Memory capacity for time profiles
30
Integrated real-time clock
With buffering of up to 60 min at 25 °C
Temperature range
-20°C – +70°C
Type
Model
Order No.
UP
@LockMLR3000
for Miracel and DCM front door
01.180.226.9
1 unit
@LockMLR3000
for twin door (e.g. DCM rear door)
01.180.227.9
1 unit
@LockMLR5000
for Miracel and DCM front door
01.180.228.9
1 unit
@LockMLR5000
for twin door (e.g. DCM rear door)
01.180.229.9
1 unit
@LockMLR5000KP
for Miracel and DCM front door
01.180.240.9
1 unit
@LockMLR5000KP
for twin door (e.g. DCM rear door)
01.180.241.9
1 unit
Accessories
Order No.
UP
Door contact
06.108.115.9
1 unit
HID transponder card
01.180.040.9
1 unit
Desktop reader for the initial reading of transponder cards
01.180.040.9
1 unit
MLR3000 Gateway
01.180.111.9
1 unit
Plug-in power supply (Europe)
01.180.035.9
1 unit
Other plug-in power supplies on request
Accessories | 87
Knürr @lock systems
Technical data – MLU3000/5000
MLU card readers can be used to connect a
room door with existing electromechanical
locking or motorized cold aisle door
(Coolfex):
Three-part hardware design MLU3000 set
comprising: external MLU reader, network
reader unit and MLU1000 lock.
Visualization on MLU reader: 2 x multicolored
status LEDs and 1 x backlit information display.
Antenna for 125 kHz transponders
(HID 26 bit system).
Optional MLU1000 lock
– Die-cast zinc (GDZn), color: matt chrome.
– 4 m control cable.
– Power supply 24 V DC +/- 10 % 100 mA.
– Proximity sensor status contact.
– Wall/sheeting thickness independent.
– Electronic opening by interrupting the
power supply.
MLU3000/MLU5000 network reader
–H
ousing reader unit in plastic housing
can be fixed with screws or a selfadhesive pad.
–N
ominal input voltage 12/24/48
V ± 10 % (DC) depending on the electronic
lock connected.
– Standby current (system ready) 40 mA (DC).
–M
ax. current consumption RJ12 (LOCK)
1.5 A (DC).
–M
ax. current consumption via relay clamp
3.0 A (DC), clamps 10-11.
88 | Accessories
– RS232 interface RS 232 cable
(RXD, TXD, GND, Reader present, PC present),
38,400 baud.
– Connecting cable (reader - external MLU
antenna) 8-pole, 350 cm, UL stranded wire
AWG 26, one side with gated RJ45 plug, one
side with crimped JST ZH connector ZHR-8.
– Relay output (via screw clamps) 2.5 mm, can
be screwed on from plug side, relay contact:
12 V, 3 A, 60 W, 120 VA, terminals 3 - 5.
– Door contact input (via screw clamps)
2.5 mm2 can be screwed from plug side,
terminals 1 and 2.
– RS485 - RS485 interface - cable to the E-LINE
by DIRAK Gateway, (+/A, -/B), 38,400 baud
(MLU3000).
– TCP/IP Ethernet interface, 10/100 Autosense,
up to 100 MBit/s (MLU5000).
– Power off when open/closed: depending
on the electronic lock connected, this is
configured in the Administration Suite
Config Tool.
– Memory capacity for transponder cards 2000:
+ 1 master transponder.
– Memory capacity for events:
500 (ring memory).
– Memory capacity for time profiles: 30.
– Integrated real-time clock with buffering
of up to 60 min at 25 °C.
– Temperature range -20°C – +70°C.
Type
Order No.
UP
MLU 3000
01.180.231.9
1 unit
MLU 5000
01.180.232.9
1 unit
Knürr @lock Schließsysteme
Option 2: BlueID
@Lock "Blue ID" system concept
@Lock BlueID is an innovative data center locking system which
is highly flexible and user-friendly. Instead of a set of keys or
transponder cards, "virtual" keys, kept on mobile communication
devices (smartphones, tablets etc.), are used. These virtual keys
are transferred to a mobile device via SMS. No online access is
necessary to use the keys.
The locking system comprises MLR1000 handles, a BlueID control system,
a power supply, vouchers for generating keys (100 daily tickets, 10 yearly
tickets, 10 reload tickets) and installation materials. Additional ticket
packages or two additional MLR1000 handles per BlueID box can be ordered
separately.
Technical data – BlueID control system
Dimensions: 157 x 86 x 58 mm (WxHxD) plus antenna and plug.
Weight: 0.24 kg.
Temperature range – storage: -40°C to +85°C.
Temperature range – operation: -20°C to +70°C.
Supply voltage: 7-32 V DC; max: 400 mA.
Power consumption: 2 W.
Relay switching voltage (max.): 250 V AC.
Relay switching current (max.): 5 A.
Contact clamps (potential-free): 4 x 2.
Optocoupler inputs (potential-free): 4 x 2.
Connection: Bluetooth 2.0 EDR.
Connection: Ethernet (RJ45).
Internal antenna connection: RP-SMA (right hand thread).
Bluetooth range: up to 5 m / up to 50 m / up to 150 m.
Security specification: allocation of access authorization and
command execution.
RSA/AES-encrypted up to 4,096 bit.
Security specification: connection to trust center infrastructure
in ISO/IEC 27001:2005-certified data center.
Security specification: FIPS 140-2-certified cryptography modules;
security specification: certificate-based ticket issuing (SHA).
Security specification: public key infrastructure (PKI).
Protection class: IP20.
Certification: CE.
Type
Order No.
UP
Knürr bundle. @LockBlueID for Knürr DCM
01.180.320.0
1 unit
Package of 100 daily tickets
01.180.321.0
1 unit
Package of 10 yearly tickets
01.180.322.0
1 unit
Package of 10 reload tickets
01.180.323.0
1 unit
Accessories | 89
Knürr @lock Schließsysteme
Option 3: Potential-free contacts
@Lock "potential-free contacts" system concept
Swing handles from the @Lock MLR1000 range are suitable for
connecting electromechanical swing handles to existing building
management systems or local identification systems, in addition to
complementing @LockBlueID or rack monitoring systems.
During this period, the user can open the MLR1000 by pressing a button.
The LED at the top of the handle offers permanently high luminosity with
a low power consumption. As a result, the lock status can be determined
quickly, even from a distance of several meters.
The handle can be opened as soon as its potential-free contacts are activated
or a voltage of 12-24 V DC is supplied. Following activation, the MLR1000
switches to ready-to-open status.
The information display integrated into the handle is backlit and allows
customer-specific information such as the cabinet row, cabinet number etc.,
to be added for further clarity.
Technical data – @LockMLR1000
Handle electronics
Two-part hardware design
MLR1000 and MLR1000 Box
Visualization
Status LED
MLR1000 Box
Housing
Interface unit, plastic housing can be fixed with screws or self-adhesive pad
Power supply
12 V DC ± 10 % via screw clamps
Standby current (system ready)
40 mA (DC)
Max. current consumption (with connector tightening)
410 mA (DC)
Operating mode
100 % ED
Relay control
12V DC
Operating time
Max. 3 seconds
Contact output
250 V AC, 2 A
Installation position
Vertical
Connection type
Screw clamps, 2.5mm2
Connecting cable (reader - handle electronics)
8-pole, 350 cm, UL stranded wire AWG 26, one side with gated RJ45 plug, one side with crimped JST ZH connector ZHR-8
Temperature range
-20°C – +70°C
@Lock MLR5000
@Lock MLR3000
@Lock MLR1000
@Lock BlueID
Admin Suite
Admin Suite
Custom
Web browser, Mobile phone app
E-Line Administration
Suite Software
Yes
Yes
No
No
External emergency
power supply connector
Yes
Yes
Yes
No
Transponder card
Transponder card
Dependent on customer's
equipment and software
BlueID
Software necessary
Identification
IP support
Yes
Gateway
No
Optional
Log files
Yes (in combination
w. Administration Suite)
Yes (in combination
w. Administration Suite)
Dependent on customer's
equipment and software
Optional
User profiles
Yes (in combination
w. Administration Suite)
Yes (in combination
w. Administration Suite)
Dependent on customer's
equipment and software
No
Four-eyes-principle
Yes (in combination
w. Administration Suite)
Yes (in combination
w. Administration Suite)
Dependent on customer's
equipment and software
Yes
Off-line mode
Technology partner
No
No
No
Yes
Eline by Dirak
Eline by Dirak
Eline by Dirak
BlueID by Baimos Technologies
Type
Model
Order No.
UP
@LockMLR1000
for Miracel and DCM front door
01.180.224.9
1 unit
@LockMLR1000
for twin doors (e.g. DCM rear door)
01.180.225.9
1 unit
90 | Accessories
Knürr System Accessories
Knürr System Accessories
Features
Mechanical accessories are fundamental to effective and economical
use of server- and network racks.
Design identical to racks
Blanking panels are an essential feature in operating an energy-efficient data
center, as they ensure that cold and warm air in the rack are separated.
Tool-less, threaded version
available.
When there are no mounting adapters for IT components, chassis rails and
shelves are required.
Varying sizes for quick mounting
and efficient cooling.
Drawers are used to store manuals, spare parts and tools needed on site.
BLANKING PANELS
CHASSIS RAILS
Various designs catering to
different requirements.
Height positioning for different
corpus heights of the subracks
possible (not defined according to
19" standard).
DRAWERS AND SHELVES
Various designs catering to
different loads.
Shelves with tool-less mounting
available.
114 | Accessories
Knürr System Accessories
Accessories | 115
Knürr System Accessories
QuickFix 19" blanking panel
Tool-less assembly
–For covering free 19" spaces
(cold-hot separation).
–Quick and easy tool-less assembly (one
click) and disassembly (quarter turn).
–Suitable for 9.5 x 9.5 square holes.
MEC20179
19" QuickFix blanking panel,
tool-less assembly
–For orderly cable management inside
the rack.
–Quick and easy tool-less assembly (one
click) and disassembly (quarter turn).
–Suitable for 9.5 x 9.5 square holes.
MEC20181
Material
– Sheet steel, 1.0 mm.
Finish
– Final digit of order number .1: powdercoated texture, RAL 7035, light-grey.
– F inal digit of order number .8: powdercoated texture, RAL 7021 dark-grey.
Finish
– Final digit of order number .1: powdercoated texture, RAL 7035, light-grey.
– Final digit of order number .8: powdercoated texture, RAL 7021 dark-grey.
MEC20180
MEC20178
Scope of delivery
– X (see Order Number for quantity)
QuickFix 19" blanking panel.
– Mounting kit.
Scope of delivery
– 6 x QuickFix 19" blanking panel cable
ports.
– 1 x Mounting kit.
How supplied
– In sets (see Order Number for quantity);
fixing clips pre-assembled.
MEC20178
Material
– Sheet steel, 1.0 mm.
How supplied
– In sets
(clips pre-assembled).
MEC20229
W
H
U
Order No.
UP
W
H
U
Order No.
UP
482.6
43.6
1
01.103.301.X
6 units
482.6
43.6
1
01.103.331.X
6 units
482.6
88.1
2
01.103.302.X
3 units
482.6
132.5
3
01.103.303.X
2 units
482.6
265.9
6
01.103.306.X
1 unit
482.6
399.2
9
01.103.309.X
2 units
482.6
932.6
21
01.103.321.X
1 unit
19" blanking plate
Screw-on
–For covering free 19" spaces
(cold-hot separation).
19" blanking panel, cable
port, threaded connection
CUD00005
Finish
– Final digit of order number .1: powdercoated texture, RAL 7035, light-grey.
– Final digit of order number .8: powdercoated texture, RAL 7021 dark-grey.
–For organized cable management
inside the rack.
– With edge protector.
CUD00021
Material
– Sheet steel, 1.0 mm.
CUD00004
Finish
– Final digit of order number .1: powder-­
coated texture, RAL 7035, light grey.
– Final digit of order number .8: powder-­
coated texture, RAL 7021 dark-grey.
CUD00023
How supplied
– In sets.
CUD00022
W
H
U
Order No.
UP
483
44
1
01.103.231.X
6 units
483
88
2
01.103.232.X
3 units
Scope of delivery
– X (see Order Number for quantity)
QuickFix 19" blanking panel.
How supplied
– In sets (see ON for quantity).
Note
Please also order front panel mounting
material.
Scope of delivery
– 6 x QuickFix 19" blanking panel cable
ports.
Note
Please also order mounting kit
for front panel.
116 | Accessories
Material
– Sheet steel, 1.0 mm.
W
H
U
Order No.
UP
482.6
43.6
1
01.103.201.X
6 units
482.6
88.1
2
01.103.202.X
3 units
482.6
132.5
3
01.103.203.X
2 units
482.6
265.9
6
01.103.206.X
1 unit
482.6
399.2
9
01.103.209.X
2 units
Knürr System Accessories
19" vented front cover
plate
19" front plate
Aluminum 3 mm
Material / Finish
– Final digit of order number .0:
AlMg3 - F23 polished with lamination
sheet.
– F inal digit of order number .1:
AlMg3 - F23, powder-coated, RAL 7035,
light-grey.
– F inal digit of order number .6:
AlMg3 - F23 EB (anodize-enabled),
anodized E6/EV1.
– F inal digit of order number .8:
AlMg3 - F23, powder-coated,
RAL 7021, dark-grey.
– Provides additional ventilation for
19" racks and 19" plinths
compliant with IEC 297.
FR000005
LUF88006
Material / Color
– Final digit of order number .1:
ABS (UL 94 V0), light-grey RAL 7035.
– Final digit of order number .9:
ABS (UL 94 V0), black RAL 9011.
LUF00093
Scope of delivery
– 1 x 19" front plate.
H
X
Y
U
Model
Order No.
43.6
31.7
1
Polished
02.008.021.0
1 unit
76.2
2
Polished
02.008.022.0
1 unit
132.5
57.1
3
Polished
02.008.023.0
1 unit
177.0
76.2
43.6
101.6
4
Polished
02.008.024.0
1 unit
190.4
6
Polished
02.008.026.0
1 unit
31.7
1
Powder-coated, RAL 7035
02.008.021.1
1 unit
88.1
76.2
2
Powder-coated, RAL 7035
02.008.022.1
1 unit
132.5
57.1
3
Powder-coated, RAL 7035
02.008.023.1
1 unit
177.0
101.6
4
Powder-coated, RAL 7035
02.008.024.1
1 unit
190.4
6
Powder-coated, RAL 7035
02.008.026.1
1 unit
31.7
1
Powder-coated, RAL 7021
02.008.021.8
1 unit
265.9
76.2
43.6
How supplied
– In sets.
W
H
U
Order No.
UP
483
43.6
1
02.008.111.1
1 unit
483
43.6
1
02.008.111.9
1 unit
UP
88.1
265.9
Scope of delivery
– 1 x vented front cover plate.
– 2 x connectors.
Note
Please also order the appropriate
mounting kit for the front plates.
How supplied
– Single items.
Note
Please also order the appropriate
mounting kit for the front plates.
MEC20109
Cover-plate filter
for 19" vented front cover plate
–Used with 19" vented front cover plate.
MEC20144
MEC20149
Material / Color
– Non-woven and screen cloth.
Scope of delivery
– 1 x cover-plate filter.
– 1 x Mounting kit.
How supplied
– In sets.
43.6
31.7
1
Anodized
02.008.071.6
1 unit
88.1
76.2
2
Anodized
02.008.072.6
1 unit
U
Order No.
UP
132.5
57.1
3
Anodized
02.008.073.6
1 unit
1
02.008.131.9
1 unit
177.0
265.9
76.2
101.6
4
Anodized
02.008.074.6
1 unit
190.4
6
Anodized
02.008.076.6
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Accessories | 117
Knürr System Accessories
19" ventilation front
panel
Chassis runner
Can be hooked on and screwed on
–Provides additional ventilation for
19" racks and 19" plinths compliant with
IEC 297.
LUF00217
–For installation in 19" rack and
19" enclosure.
–Can be hooked on for quick and easy
mounting.
–Can also be attached with screws to
accommodate heavier loads.
–Can be screwed from inside (used in rack
suites).
–Adjustable height to suit various
main-section heights.
MEC20162
Material
– Aluminum.
Finish
– Final digit of order number .1: powder-­
coated, RAL 7035 light-grey.
– Final digit of order number .6:
colorless anodized E 6 / EV 1.
Material / Finish
– Sheet steel, 2.0 mm.
– Zinc-passivated, blue chrome-plated.
How supplied
– Single items.
Load rating
– 1000 N max. with even load distribution.
Note
Please also order the appropriate
mounting kit for the front plates.
Scope of delivery
– 2 x chassis runners.
– 1 x Mounting kit.
How supplied
– In pairs.
MEC20110
Scope of delivery
– 1 x ventilation front plate.
MEC20167
MEC20167
H
Y
U
Model
Order No.
UP
43.6
31.7
1
Powder-coated, RAL 7035
02.008.101.1
1 unit
43.6
31.7
1
Anodized
02.008.101.6
1 unit
132.5
57.1
3
Powder-coated, RAL 7035
02.008.103.1
1 unit
132.5
57.1
3
Anodized
02.008.103.6
1 unit
19" front plate
hinged
– With 19" adapter and hinge.
Material
– Aluminum, 3 mm.
FRO00007
Finish
– Anodized.
Scope of delivery
– 1 x front plate, hinged.
– 1 x 19" adapter.
– 1 x hinge.
How supplied
– In sets.
Note
Please also order the appropriate
mounting kit for the front plates.
FR000006
U
Model
Order No.
UP
3
Anodized
01.110.780.6
1 unit
6
Anodized
01.110.781.6
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
118 | Accessories
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Note
When selecting the chassis runner, please
take into account the depth "d" of the
rack or enclosure. Four 19" extrusions are
required for mounting.
DRack
d
L
For rack type
Order No.
UP
600
365
336
Miracel/Smaract
01.103.051.0
1 pair
600
440
411
Miracel/Smaract
01.103.052.0
1 pair
800
565
536
Miracel/Smaract
01.103.053.0
1 pair
800
640
611
Miracel/Smaract
01.103.054.0
1 pair
900
665
636
Miracel/Smaract
01.103.055.0
1 pair
from 900 740
711
Miracel/Smaract/CoolTherm
01.103.056.0
1 pair
Knürr System Accessories
Aluminum chassis runner
– Can be screwed on.
–For installation in 19" rack and
19" enclosure.
–Can be screwed from inside (used in rack
suites).
–Height can be adjusted to suit various
main-section heights.
MEC20189
Material / Finish
– Extruded aluminum, polished.
Load rating
– 700 N max. with even load distribution.
Scope of delivery
– 2 x chassis runners.
– 1 x Mounting kit.
How supplied
– In pairs.
Chassis runner, adjustable depth
– For installation in 19" rack and
19" enclosure.
– Adjustable depth.
–Can be screwed from inside (used in rack
suites).
–Height can be adjusted to suit various
main-section heights.
MEC20163
MEC20166
Note
When selecting the chassis runner, please
take into account the depth "d" of the
rack or enclosure. Four 19" extrusions are
required for mounting.
DRack
d
L
For rack type
Order No.
UP
600
365
336
Miracel/Smaract
01.103.101.0
1 pair
Material / Finish
– Sheet steel, 1.25 mm.
– Zinc-passivated, blue chrome-plated.
Load rating
– 200 N max. with even load distribution.
Scope of delivery
– 2 x basic rails.
– 2 x extension rails.
– 1 x Mounting kit.
How supplied
– In pairs.
Note
When selecting the chassis runner, please
take into account the depth "d" of the
rack or enclosure. Four 19" extrusions are
required for mounting.
600
440
411
Miracel/Smaract
01.103.102.0
1 pair
D
d
For rack type
Order No.
UP
800
565
536
Miracel/Smaract
01.103.103.0
1 pair
600
365-440
Miracel/Smaract
01.103.091.0
1 pair
800
640
611
Miracel/Smaract
01.103.104.0
1 pair
800-1200
565-740
Miracel/Smaract
01.103.092.0
1 pair
800
900
636
Miracel/Smaract
01.103.105.0
1 pair
900-1200
740
CoolTherm
01.103.092.0
1 pair
from 900 740
711
Miracel/Smaract/CoolTherm
01.103.106.0
1 pair
600
385
354
ConAct
01.103.112.0
1 pair
600
435
403
DoubleProRack with door
01.103.118.0
1 pair
800
635
603
DoubleProRack with door
01.103.119.0
1 pair
500
460
428
DoubleProRack, no door
01.103.122.0
1 pair
600
560
528
DoubleProRack, no door
01.103.123.0
1 pair
700
660
628
DoubleProRack, no door
01.103.124.0
1 pair
600
385
ConAct
01.103.091.0
1 pair
500-600
435-460
DoubleProRack
01.103.091.0
1 pair
600-800
560-660
DoubleProRack
01.103.092.0
1 pair
Accessories | 119
Knürr System Accessories
19" shelf
Fixed
19" QuickFix shelf
tool-less assembly
–Integrated mounting holes; front and
rear for handle or hinged cable routing.
– Perforated to optimize air supply.
MEC00451
Material / Finish
– Sheet steel 1.0 mm, electroplated zinc,
powder-coated texture.
–Quick and easy tool-less mounting.
Mounted on 19" cutouts.
–Quick and easy tool-less fitting (one click)
and removal (quarter turn).
–Suitable for all racks and enclosures
with 19" mounting hole extrusions
(9.0 x 9.0 square holes).
–Adjustable depth to accommodate
variable recess depths and special
dimensions.
–Perforated to optimize air supply.
MEC20221
Color
– Final digit of order number .1:
RAL 7035, light grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Load rating
– 500 N static per item.
Material
– Sheet steel, 1.0 mm.
Finish
– Final digit of order number .1: powdercoated texture, RAL 7035, light-grey.
– Final digit of order number .8: powdercoated texture, RAL 7021 dark-grey.
Scope of delivery
– 2 x mounting rails, incl. mounting
bracket.
– 1 x shelf board.
– 1 x extension board (from L = 600).
– 1 x Mounting kit.
MEC20018
How supplied
– In sets.
Note
Please order requisite mounting adapter
when used for DCM or Miracel/Smaract
server extrusion.
DCM 1 Set 01.147.640.9
Miracel 1 Set 01.127.119.9
d
WxL
For rack type
Order No.
UP
365
430 x 300
DCM / Miracel /Smaract
01.102.001.1
1 unit
Load rating
– 700 N static with even load distribution.
Scope of delivery
– 1 x 19" QuickFix shelf.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Cannot be used for 19" t-slot extrusions.
440
430 x 300
DCM / Miracel /Smaract
01.102.002.1
1 unit
565
430 x 500
DCM / Miracel /Smaract
01.102.003.X
1 unit
d
WxL
Order No.
UP
640
430 x 600
DCM / Miracel /Smaract
01.102.004.X
1 unit
365-500
430 x 300
01.102.071.X
1 unit
740
430 x 600
DCM / Miracel /Smaract
01.102.005.X
1 unit
565-740
430 x 500
01.102.072.X
1 unit
435, 460
430 x 300
DoubleProRack
01.102.002.1
1 unit
560
430 x 500
DoubleProRack
01.102.003.1
1 unit
635, 660
430 x 600
DoubleProRack
01.102.004.1
1 unit
385
430 x 300
ConAct
01.102.001.1
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
120 | Accessories
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr System Accessories
19" shelf
partially retractable
19" shelf
fully retractable
–Integrated mounting holes, front and
rear for handle or hinged cable routing.
– Perforated to optimize air supply.
–Locks in retracted position (friction lock).
–Quick separator for tool-less removal and
decoupling of shelf board.
MEC00452
–Integrated mounting holes, front and rear
for handle or hinged cable routing.
– Perforated to optimize air supply.
–Locks in retracted position (friction lock).
–Quick separator for tool-less removal and
decoupling of shelf.
MEC00462
Material / Finish
– Sheet steel, electroplated zinc,
powder-coated texture.
Color
– Final digit of order number .1:
RAL 7035, light grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035, light grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Load rating
– 500 N static per item.
Scope of delivery
– 1 x pair of telescopic slides.
– 1 x shelf board.
– 1 x Mounting kit.
How supplied
– In sets.
Material / Finish
– Sheet steel, electroplated zinc,
powder-coated texture.
MEC20020
Load rating
– 500 N static per item.
Scope of delivery
– 1 x pair of telescopic slides.
– 1 x shelf board.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20019
Note
Order requisite mounting adapter when
used for DCM or Miracel/Smaract server
extrusion.
UP
Note
Please order requisite mounting adapter
when used for DCM or Miracel/Smaract
server extrusion.
d
WxL
Order No.
d
WxL
Order No.
365-565
430 x 360
01.102.042.X-001 1 unit
365-565
430 x 360
01.102.040.X-001 1 unit
UP
565-750
430 x 560
01.102.043.X-001 1 unit
565-750
430 x 560
01.102.041.X-001 1 unit
Accessories | 121
Knürr System Accessories
19" heavy-duty shelf
fixed
19" heavy-duty shelf
fully retractable
– Perforated utility space.
–Installed as base plate for server or
battery.
MEC00120
Material / Finish
– Sheet steel 1.5 mm, electroplated zinc,
powder-coated texture.
– Perforated to optimize air supply.
–Locks in pushed-in and fully retracted
position.
–Easy mounting with patented quickmounting system.
–Installed as base plate for server or
battery.
MEC20022
Color
– Final digit of order number .1:
RAL 7035, light grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Material / Finish
Sheet steel, powder-coated texture.
Load rating
– 1000 N static for CW installation.
– 1500 N static for 19" installation.
Scope of delivery
– 1 x shelf, fixed, threaded connection.
– 2 x mounting braces.
– 1 x Mounting kit.
MEC20117
Color
– Final digit of order number .1:
RAL 7035, light grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Note
Please order requisite mounting adapter
when used for DCM or Miracel/Smaract
server extrusion.
d
WxL
For rack type
Order No.
UP
467 x 460
DCM / Miracel /Smaract
01.131.473.X
1 unit
Load rating
– 1200 N static.
Scope of delivery
– 1 x pair of telescopic slides.
– 1 x shelf board.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20113
How supplied
– In sets.
565
Note
Please order requisite mounting adapter
when used for DCM (2x 01.147.640.9) or
Miracel/Smaract (2x 01.127.119.9) server
extrusion.
640
467 x 460
DCM / Miracel /Smaract
01.131.475.X
1 unit
d
WxL
For rack type
Order No.
UP
665
467 x 460
DCM / Miracel /Smaract
01.131.476.X
1 unit
565-750
412 x 560
DCM / Miracel /Smaract
01.102.650.X-001
1 unit
740
467 x 560
DCM / Miracel /Smaract
01.131.474.X
1 unit
Handle
Cable cantilever
MEC20154
–Can be tilted outward from the rear,
facilitating easy access to the rear
(only 3 piece).
–For easy mounting in side the rack/on
the shelf; shelf or rack easily attached or
decoupled with spring clip.
–Guarantees defined and kink-free
cable management.
–Minimum space requirement
at the back of shelves: 40 mm.
MEC88005
–Suitable for traditional and
heavy-duty shelves.
– With M5 internal thread.
MEC20138
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated.
Scope of delivery
– 1 x cable cantilever.
– 1 x Mounting kit.
Material
– Die-cast aluminum consoles.
– Extruded aluminum handles.
– Cap made of ABS UL 94 HB.
Finish
– Handle, powder-coated,
grey-blue, RAL 5008/
Cap, light-grey, RAL 7035.
Scope of delivery
– 2 x handles.
How supplied
– In sets.
MEC20111
Type
Order No.
UP
Order No.
UP
2-piece
05.040.096.0
1 unit
00.050.503.1
1 set
122 | Accessories
Knürr System Accessories
19" shelf, 2 U
Fixed
19" drawer
Installed on the front
–Installed in racks with fixed 19"
components, front.
–Quick and easy mounting
on 19" extrusions.
–Also for swing frame in the 19" rack
and 19" enclosure.
MIR00373
–Installed on front 19" extrusions.
–For storing service documents.
– Quick and easy mounting.
SCH00058
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Material / Finish
– Drawer, sheet steel,
powder-coated texture; telescopic
slides, Sendzimir zinc-coated.
Color
– Final digit of order number .1:
RAL 7035, light grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Material
– Sheet steel, 1.5 mm.
Load rating
– 200 N static.
Scope of delivery
– 1 x 19" drawer with lock,
including key.
– 1 x pair of telescopic slides.
– 1 x Mounting kit.
Scope of delivery
– 1 x shelf, fixed.
– 1 x Mounting kit.
MIR00375
Load rating
– 150 N static.
How supplied
– In sets.
W
H
WxL
Order No.
UP
482.6
88.1
442 x 280
01.113.736.X
1 unit
482.6
88.1
442 x 380
01.113.737.X
1 unit
How supplied
– Pre-assembled.
SCH00054
19" shelf, 2 U
Adjustable
–Installed in racks with
adjustable 19" components, front.
–Quick and easy mounting on
19" extrusions.
–Also for swing frame in the 19" rack
and 19" enclosure.
–Depth can be adjusted in increments
of 25 mm.
MIR00102
W
H
U
Order No.
UP
482.6
43.6
1
01.102.048.X-001
1 unit
482.6
88.1
2
01.102.048.X-002
1 unit
482.6
132.5
3
01.102.048.X-003
1 unit
Material / Finish
– Sheet steel, 1.5 mm,
powder-coated texture.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
MIR00103
Load rating
– 200 N static.
How supplied
– In sets.
W
H
WxL
Order No.
UP
482.6
88.1
442 x 480
01.113.411.X
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Accessories | 123
Knürr System Accessories
19" keyboard drawer, 1 U
for 19" keyboard
19" drawer with lock
– Installed in racks with fixed
19" components on the front and rear.
– Fully retractable.
– With lock.
– Locks in retracted position (friction lock).
–Quick separator for tool-less removal and
decoupling of shelf board.
SCH00057
– With hand support.
– With cable strain relief.
– Locks in retracted position (friction lock).
–Quick separator for tool-less removal and
decoupling of drawer.
SCH00059
Material / Finish
– Drawer, sheet steel 1.0 mm,
powder-coated texture;
telescopic slides, cold rolled steel,
Sendzimir zinc-coated.
Material
– Main unit, sheet steel, 1.0 mm.
– Front panel, sheet steel, 1.0 mm.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
SCH00053
Load rating
– 500 N static.
SCH00055
Scope of delivery
– 1 x 19" drawer with lock,
including key.
–1
x pair of telescopic slides.
–1
x Mounting kit.
U
WxL
For rack type
Order No.
UP
565-750
2
412 x 562
DCM/Miracel/Smaract
01.102.049.X-001
1 unit
565-750
4
412 x 562
DCM/Miracel/Smaract
01.102.049.X-002
1 unit
19" writing board 1 U
fully retractable
How supplied
– Pre-assembled.
d
Order No.
UP
565-750
01.102.047.X-001
1 unit
19" keyboard drawer 1 U
with extract for pc mouse
– Heel of hand support.
– Mouse area can be extracted right/left.
– Storage compartment for pc mouse.
– Locks in retracted position (friction lock).
–Quick separator for tool-less removal and
decoupling of drawer.
MEC00116
– With handle.
– Can also be used as writing board.
– Locks in retracted position (friction lock).
Scope of delivery
– 1 x 19" keyboard drawer, 1 U.
– 1 x pair of telescopic slides.
– 1 x Velcro for securing the keyboard.
– 1 x Mounting kit.
How supplied
– Pre-assembled.
D
MEC00118
Material / Finish
– Shelf, sheet steel, 1.0 mm.
– Telescopic slide, cold-rolled steel.
Dimensions
– Useful shelf space: measurements
without heel of hand support
372 x 209 x 32 mm.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Color
– Final digit of order number .1:
RAL 7035 light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
Load rating
– 500 N static.
MEC20118
d
WxL
Scope of delivery
– 1 x shelf.
– 1 x pair of telescopic slides.
– 1 x Mounting kit.
How supplied
– Pre-assembled.
Order No.
Scope of delivery
– 1 x 19" keyboard drawer, 1 U.
– 1 x pair of telescopic slides.
– 1 x heel of hand support.
– 1 x Mounting kit.
How supplied
– Pre-assembled.
Note
Keyboard is not included.
Not compatible with racks, depth 600.
UP
365-565
430 x 360
01.102.045.X-001 1 unit
565-750
430 x 560
01.102.046.X-001 1 unit
124 | Accessories
d
Order No.
UP
565-750
01.136.379.X
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr System Accessories
Document holder
– Self-adhesive; for higher loads use
6 mm holes.
–For DIN A4 documents.
Material
– High-impact Polystyrol.
Color
– Grey.
MEC20027
Scope of delivery
– 1 x document holder.
W
L
D
Order No.
UP
264
236
30
05.016.045.0
1 unit
Accessories | 125
Knürr System Accessories
The right mounting set for every rack type
DCM
Miracel
T-slot
Miracel
Mount.
holes
Miracel
Server
Miracel
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
Name
Order No.
UP
T-Slot mounting
set, M5, wide
05.041.320.9
1 set
Mounting set
Mount. holes
M5/BI 1.5
05.041.321.9
1 set
Mounting set
Mount. holes
M5/BI 2.5
05.041.325.9
1 set
Mounting set
dpr T-slot, M5
narrow
05.041.323.9
1 set
Mounting set
dpr mount.
holes M5
05.041.322.9
1 set
Mounting Set,
ConAct M5
05.041.324.9
1 set
Name
Order No.
UP
The right mounting set for front panel mounting
Model: Z-form screw
DCM
Miracel
T-slot
Miracel
Mount.
holes
Miracel
Server
Miracel
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
FP mounting set,
05.041.335.9
T-slot M5, wide
1 set
FP mounting set
Mount. holes
M5/BI 1.5
05.041.336.9
1 set
FP mounting set
Mount. holes
M5/BI 2.5
05.041.337.9
1 set
FP mounting set,
T-slot M5,
05.041.338.9
narrow
1 set
Name
UP
The right mounting set for front panel mounting
Model: countersunk screw + rosette
DCM
Miracel
T-slot
126 | Accessories
Miracel
Mount.
holes
Miracel
Server
Miracel
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
Order No.
FP mounting set,
05.041.340.9
T-slot M5, wide
1 set
FP mounting set
Mount. holes
M5/BI 1.5
05.041.341.9
1 set
FP mounting set
Mount. holes
M5/BI 2.5
05.041.342.9
1 set
FP mounting set,
T-slot M5,
05.041.343.9
narrow
1 set
Knürr System Accessories
The right accessories for every rack type
DCM
Miracel
T-slot
Miracel
Mount.
holes
Miracel
Server
Miracel
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
Name
Order No.
UP
Spring nut,
M5 wide
01.350.431.9
1 set
Spring nut,
M5 narrow
05.041.503.9
1 set
Spring nut
M6
01.350.405.9
1 set
Cage nut
M5/BI 1.5
05.041.513.7
1 set
Cage nut
M5/BI 2.5
05.041.518.7
1 set
Oval-head
screws, Z-form,
M5 x 10
05.041.330.9
1 set
Oval-head
screws, Z-form,
M5 x 16
05.041.331.9
1 set
Countersunk
screw M5 x 12
+ rosette
05.041.203.9
1 set
Countersunk
screw M5 x 16
+ rosette
05.041.290.9
1 set
Accessories | 127
Knürr System Accessories
Mounting tool
for cage nuts
Mounting set; mounting holes
server extrusion M5 / plate, 2.5 mm
for Miracel®/DCM®/Smaract®
–Allows easy clipping
of cage nuts on extrusions.
MIR00114
–For securing 19" front panels
and 19" components.
Material
– Spring steel.
MEC20126
Scope of delivery
– 1 x mounting tool.
Order No.
UP
01.130.985.9
1 unit
Scope of delivery
– 100 x cage nuts M5 /plate, 2.5 mm.
– 100 x oval-head screws, Z-form, M5 x 16.
– 20 x spring nuts, M5 wide.
– 20 x cylinder screws, M5 x 8.
How supplied
– In sets.
T-Slot mounting set, M5, wide
for Miracel / Smaract
®
1 set
T-slot mounting set, M5,
narrow for DoubleProRack®
Scope of delivery
– 100 x spring nuts, M5 wide.
– 100 x oval-head screws, Z-form, M5 x 10.
– 20 x cage nuts M5 /plate, 1.5 mm.
– 20 x cylinder screws, M5 x 8.
–For securing 19" front panels
and 19" components.
MEC20127
UP
05.041.325.9
®
–For securing 19" front panels
and 19" components.
MEC20125
Order No.
How supplied
– In sets.
Order No.
UP
05.041.320.9
1 set
Scope of delivery
– 100 x spring nuts, M5 narrow.
– 20 x oval-head screws, Z-form, M5 x 10.
– 50 x cylinder screws, M5 x 10.
– 30 x oval-head screws, Z-form, M5 x 8.
How supplied
– In sets.
Order No.
UP
05.041.323.9
1 set
Mounting set, M5 / plate, 1.5 mm
for Miracel® / Smaract®
Mounting set; mounting holes M5
for DoubleProRack®
–For securing 19" front panels
and 19" components.
MEC20126
Scope of delivery
– 100 x cage nuts M5 /plate, 1.5 mm.
– 100 x oval-head screws, Z-form, M5 x 16.
– 20 x spring nuts, M5 wide.
– 20 x cylinder screws, M5 x 8.
How supplied
– In sets.
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
128 | Accessories
Order No.
UP
05.041.321.9
1 set
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
–For securing 19" front panels
and 19" components.
MEC20126
Scope of delivery
– 100 x cage nuts M5 /plate, 2.5 mm.
– 50 x oval-head screws, Z-form, M5 x 16.
– 40 x spring nuts, M5 narrow.
– 40 x cylinder screws, M5 x 10.
How supplied
– In sets.
Order No.
UP
05.041.322.9
1 set
Knürr System Accessories
Mounting holes, mounting set, M5
for ConAct®
–For securing 19" front panels
and 19" components.
MEC20096
Scope of delivery
– 50 x cage nuts M5 /plate, 1.5 mm.
– 50 x oval-head screws, Z-form, M5 x 16.
– 50 x cylinder screws, M5 x 8.
– 25 x locking nuts, M5.
How supplied
– In sets.
Order No.
UP
05.041.324.9
1 set
Front panel mounting set;
mounting holes, M5/plate, 2.5 mm
for Miracel®/DCM®/Smaract®/
DoubleProRack®
Type 1
MEC20098
Type 2
MEC20097
–For securing 19" front panels
and 19" components.
Scope of delivery
– Type 1:
50 x cage nuts M5 /plate, 2.5 mm.
50 x oval-head screws, Z-form, M5 x 16.
– Type 2:
50 x cage nuts M5 /plate, 2.5 mm.
50 x countersunk screws, M5 x 16.
50 x rosettes.
Front panel mounting set, T-slot,
M5 wide for Miracel® / Smaract®
Type 1
How supplied
– In sets.
Model
Order No.
UP
Type 1: Z-form screw
05.041.337.9
1 set
Type 2: Screw + rosette
05.041.342.9
1 set
–For securing 19" front panels
and 19" components.
MEC20129
Scope of delivery
– Type 1:
50 x spring nuts, M5 wide.
50 x oval-head screws, Z-form, M5 x 10.
–T
ype 2:
50 x spring nuts, M5 wide.
50 x countersunk screws, M5 x 12.
50 x rosettes.
Front panel mounting set, T-slot
for DoubleProRack®
Type 1
Type 2
MEC20130
How supplied
– In sets.
–For securing 19" front panels
and 19" components.
MEC20129
Type 2
Model
Order No.
UP
Type 1: Z-form screw
05.041.335.9
1 set
Type 2: screw + rosette
05.041.340.9
1 set
Scope of delivery
– Type 1:
50 x spring nuts, M5 narrow.
50 x oval-head screws, Z-form, M5 x 10.
– Type 2:
50 x spring nuts, M5 narrow.
50 x countersunk screws, M5 x 12.
50 x rosettes.
How supplied
– In sets.
MEC20130
Front panel mounting set
for Miracel®/Smaract®/ConAct®
Type 1
MEC20098
Type 2
– For securing 19" front panels
and 19" components.
– Mounting holes.
Model
Order No.
UP
Type 1: Z-form screw
05.041.338.9
1 set
Type 2: screw + rosette
05.041.343.9
1 set
Scope of delivery
– Type 1:
50 x cage nuts M5 /plate, 1.5 mm.
50 x oval-head screws, Z-form, M5 x 16.
–T
ype 2:
50 x cage nuts M5 /plate, 1.5 mm.
50 x countersunk screws, M5 x 16.
50 x rosettes.
MEC20097
How supplied
– In sets.
Model
Order No.
UP
Type 1: Z-form screw
05.041.336.9
1 set
Type 2: screw + rosette
05.041.341.9
1 set
Accessories | 129
Knürr System Accessories
Spring nut
Oval-head screw
– To clip on T-slot
where required.
MEC00060
– IEC DIN 967.
MEC20140
–Type 1: M5 wide
for Miracel / Smaract.
T-slot size: 10 x 13 mm.
–Type 2: M5 narrow
for DoubleProRack.
T-slot size: 8 x 13 mm.
–Type 3: M6
for Miracel / Smaract.
T-slot size: 10 x 13 mm.
Scope of delivery
– 50 x spring nuts.
Order No.
Type 1: M5 wide
01.350.431.9
1 set
05.041.503.9
1 set
Type 3: M6
01.350.405.9
1 set
Model
Order No.
UP
05.041.330.9
1 set
M5 x 16
05.041.331.9
1 set
M6 x 10
05.041.332.9
1 set
M6 x 16
05.041.333.9
1 set
Countersunk screw +
rosette
– IEC DIN EN ISO 7047
Cage nut
– For clipping into extrusions with
mounting holes.
–Type 1: Plate, 1.5 mm
for Miracel / Smaract /ConAct /SoHo.
–Type 2: Plate, 2.5 mm
for Miracel Server /Smaract Server/
DoubleProRack mounting holes.
M5: Type 1: Plate, 1.5 mm
05.041.513.7
1 set
05.041.518.7
1 set
M6: Type 1: Plate, 1.5 mm
05.041.514.7
1 set
M6: Type 2: Plate, 2.5 mm
05.041.519.7
1 set
Dimensions in mm:
H = Height
d = Insertion depth
D = Depth
L = Length
130 | Accessories
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
How supplied
– In sets.
Order No.
UP
1 set
M5 x 16
05.041.290.9
1 set
Oval-head screw
self-guiding
UP
M5: Type 2: Plate, 2.5 mm
05.041.203.9
MEC80020
Order No.
Scope of delivery
– 50 x countersunk screws.
– 50 x rosettes.
Model
Scope of delivery
– 50 x cage nuts.
Model
M5 x 12
How supplied
– In sets.
h = Installation height
How supplied
– In sets.
M5 x 10
MEC20141
W = Width
UP
Type 2: M5 narrow
Scope of delivery
– 50 x oval-head screws, Z-form.
How supplied
– In sets.
Model
MEC20139
– DIN 7500.
–Suitable for system accessories fixed on
the inside of the 19" extrusions.
–Suitable for 19" steel and
19" aluminum extrusions.
–Easy screwing.
Scope of delivery
– 50 x oval-head screws, M6x10.
How supplied
– In sets.
Model
Order No.
UP
M6 x 10
05.041.334.9
1 set
Knürr System Accessories
Oval-head screw
With Phillips head
Luminestra
Rack lighting
– IEC DIN EN ISO 7045.
MEC20227
Scope of delivery
– 1 x set of 50 units.
– Only for rack type Miracel W 700, W 800.
–Mounted on the basic frame above the
vertical extrusions.
– With 13 watt fluorescent tube.
– With on/off rocker switch.
–With 2 m power supply cable and EURO
plug.
– Complete with mounting material.
–Only with 123 mm front clearance space.
ELM00058
MEC20228
L
Model
Order No.
UP
8
M 5 no washer
05.041.611.8
1 set
12
M 4 no washer
05.041.609.8
1 set
Color
– White.
Scope of delivery
– 1 x Luminestra rack lamp.
– 2 x mounting brackets.
– 1 x Mounting kit.
12
M 5 with washer
05.041.613.8
1 set
16
M 5 with washer
05.041.614.8
1 set
W
H
D
Order No.
UP
16
M 6 with washer
05.041.616.8
1 set
70
20
555
01.131.227.9
1 unit
Cylinder screw
With hexagon head
Compact rack lamp
– IEC ISO 4762 (modified).
MEC20226
Scope of delivery
– 1 x set of 50 units.
ELM00135
L
Model
Order No.
UP
8
M5
05.041.574.8
1 set
8
M 5 microencapsulated
05.041.575.9
1 set
Tensiloc nut
Features
– Magnetic mounting.
– Energy-saving lamp.
– Protective contact socket.
– ON/OFF switch.
– Power supply lead 3 m.
– Cover panel.
Compliance
– VDE ICE.
Protection rating
– IP20.
Material
– Steel nickel-plated.
MEC20225
Scope of delivery
– 1 x set of 50 units.
Model
Order No.
UP
M5
05.041.533.8
1 set
Technical data
– Operating voltage 230 V / 50-60 Hz.
– Lighting: compact fluorescent tube
with integrated starter.
– Power consumption: 11 W ^= 75 W
bulb.
– Light intensity: 900 Lm.
– Interference suppression compliant
with VDE 0712, IEC 82.
– Socket: 230 VAC / 16A.
– Connections: 3-pole screw clamp,
2.5 mm2 with strain relief.
W
H
D
Order No.
UP
65
65
365
01.131.465.9
1 unit
Accessories | 131
Knürr System Accessories
Door contact switch
Distribution box
–For mounting trade-standard installation
technology DIN rail components, such as
fuses, clamps, relays, etc.
–When installed, the mounting level can
be pulled out at the front and locked in
position, significantly simplifying the
wiring of the individual components.
Not available for “fixed installation”
model. Up on request: Delivered
assembled and wired. Further versions
and models up on request.
–Installation space for up to 22 pieces of
equipment with 18 mm width each.
–Mounting of the TS35 DIN rail on several
levels with simple plug-in connection.
Not available for “fixed installation”
model.
–"Snap-in" mounting of DIN rail components.
–Easy access to the protective grounding
and neutral conductor rails from the
front.
–Various positioning options available
for N and PE rails. Not available for “fixed
installation” model.
–Cable entry at the rear via double brush
strip (optionally via bushing sockets).
–Cable strain relief on the inside and
therefore accessible from the front.
–Labeling strips on the front, above and
below the installation space.
–Installation options available for power
distribution with 230 V AC, but also in
the low-voltage range (e.g. 48 V DC).
– 19" slot-in, 3 U, depth 150 mm.
HEI00379
– On/off switch, 4 A, 230 V ~.
–Activated by opening and closing door.
ELM00137
Scope of delivery
– 1 x door contact switch (not wired).
– 1 x mounting bracket.
– 1 x Mounting kit.
Order No.
UP
01.110.722.9
1 unit
Cable junction box
– For 230 V electrical installation on-site.
– As fixed-location exchange point.
– Quick and easy mounting.
Scope of delivery
– 1 x cable junction box.
ELM00033
Material / Finish
– Panels powder-coated texture,
RAL 7035 light-grey.
– Main unit, sheet steel, zinc-passivated.
Scope of delivery
– 1 x distribution box.
– Including N and PE rails, cable entry,
cable strain relief, empty panel covers
and grounding set.
ELM00034
Order No.
UP
00.078.720.9
1 unit
How supplied
– Fully assembled.
Modular terminal box
W
H
D
U
19"
Model
Order No.
UP
482.6
134
150
3
•
Pull-out
03.013.385.1
1 unit
482.6
134
150
3
•
Fixed
03.013.470.1
1 unit
–
–
–
–
ELM00128
HEI20282
132 | Accessories
For 230V electrical installation on-site.
With series terminal, 8 x 42.
Pg 11/16 entry.
IP 54.
Material
– High-impact, fire-resistant polystyrene.
Scope of delivery
– 1 x modular terminal box.
– 4 pg compression glands, pg11.
Order No.
UP
01.117.521.9
1 unit
Knürr System Accessories
1 equipotential bonding bar
– For central grounding of all protective
conductors.
– With sealable cover.
–Connection options:
1 x round conductor 8 – 10 mm Ø
1 x flat conductor up to 30 mm wide or
round conductor 8 – 10 mm Ø.
–7 x single or multi-wire conductors
up to 16 mm2 or fine-wire conductors
up to 10 mm2.
ELM00114
Contact clamp
–Enables safe connection of equipment
and components to grounding bar.
– For cables up to 25 mm2.
Scope of delivery
– 20 x contact clamps.
DOP20016
Material
– Base plate and cover plate,
high-impact plastic.
–B
rass nickel-plated contact strip.
Order No.
UP
01.110.715.9
20 units
Scope of delivery
– 1 x equipotential bonding bar.
Order No.
UP
01.117.524.3
1 unit
Grounding bar
–For safe grounding or potential
equalization of equipments and
components.
Material
– Electrolyte copper 9 x 9.
Scope of delivery
– 1 x grounding bar.
– 2 x brackets.
– 1 x Mounting kit.
ELM00068
U
Model
Order No.
UP
24
For DoubleProRack
01.240.546.9
1 unit
21
For DoubleProRack
01.240.545.9
1 unit
18
For DoubleProRack
01.240.544.9
1 unit
15
For DoubleProRack
01.240.543.9
1 unit
45
For Miracel
01.110.709.9
1 unit
41
For Miracel
01.110.708.9
1 unit
12
For Miracel
01.110.703.9
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Accessories | 133
Knürr Fan Units
Knürr Fan Units
Features
CoolBlast®
Modular construction for varying
heat loads; different designs
available.
Top-mounting fan and 19-fan
unit available.
Special protection grid keeps
pressure losses to a minimum
and reduces noise levels.
Energy-efficient speed-controlled
design also available.
Silent top-mounting fan
Minimal noise level for use
in office environment.
Provides forced rack cooling.
Filter fan
Protection class IP54.
Filter can be replaced
quickly and easily.
Can be used to draw or push air.
134 | Accessories
The ever-increasing power losses of electronic modules make for high
demands on effective cooling. Large air-flow volumes ensure secured heat
dissipation. The packing density of the electronic equipment in racks and
enclosures is also increasing.
The sharp rise in the price of electricity has resulted in energy efficiency gaining
importance and environmental concerns increasingly become a prominent
decision-making factor. Consequently, the use of speed-controlled fan units is
rising. The additional costs generally prove to be a worthwhile investment.
Knürr Fan Units
Knürr Fan Units
Knürr CoolBlast® Fan Unit for Cover Panel Installation
Unregulated and thermostat-controlled
–Provides powerful rack cooling.
–Suitable for retrofitting in cover panel
of Miracel® rack.
–DC versions and 115 VAC versions upon request
(see Knürr CoolBlast® fan inserts).
–Thermostat-controlled model: Fan function
(ON/OFF) thermostat-controlled; setting range
from 0° to + 60° C.
LUF20203
Compliance
– CE marking compliant with Low Voltage
Directive 73/23/EEC; EMC directive 89/366/
EEC.
Material
– Enclosure: sheet steel, high-grade steel grid.
Scope of delivery
– 1 x CoolBlast fan unit.
– 1 x mains cable, 3 m with safety plug
(230 VAC).
– 1 x Mounting kit.
– 1 x Operating instructions.
Finish
– Zinc-passivated.
How supplied
– Assembled, wired and tested.
Technical data for single fan
– See page 118.
Note
Please also order corresponding mains cable.
LUF20205
LUF20124
LUF20175
Electrical connection
P(W)
·
V (m3/h)
∆P(Pa)
p(dB(A))
Order No.
UP
CoolBlastT 230V 3-piece
207...253 VAC; 50/60 Hz
45
495
74
45.2
03.027.301.1
1 unit
CoolBlastT 230V 6-piece
207...253 VAC; 50/60 Hz
90
990
74
48.8
03.027.302.1
1 unit
Name
Model
CoolBlastT 230V 2-piece
Thermostat
207...253 VAC; 50/60 Hz
30
330
74
43.4
03.027.310.1
1 unit
CoolBlastT 230V 3-piece
Thermostat
207...253 VAC; 50/60 Hz
45
495
74
45.2
03.027.311.1
1 unit
CoolBlastT 230V 6-piece
Thermostat
207...253 VAC; 50/60 Hz
90
990
74
48.8
03.027.312.1
1 unit
136 | Accessories
Knürr Fan Units
Knürr CoolBlast® Fan Unit for Cover Panel Installation
speed-controlled
–Provides powerful rack cooling.
–Suitable for retrofitting in top cover of
Miracel rack.
–DC version upon request (see CoolBlast fan
inserts).
– Settable reference temperature (20° to 55° C).
–Speed control, 30 to 100 %, if sensor fails,
100 % rotation.
– Individual fan monitoring.
–Potential-free common alarm output
for excess temperature and fan failure.
–Visual status display for O.K.,
excess temperature and fan failure.
– Acoustic warning inclusive reset button.
LUF20160
Technical data for single fan
Compliance
– CE marking compliant with
Low Voltage Directive 73/23/EEC;
EMC directive 89/366/EEC.
Scope of delivery
– 1 x CoolBlast fan unit.
– 1 x sensor cable, 2 m (plug-in).
– 1 x signal cable, 2 m (plug-in).
– 1 x mains cable, 3 m with safety plug
(230 VAC).
– 1 x Mounting kit.
– 1 x Operating instructions.
Material
– Enclosure: sheet steel, high-grade steel grid.
How supplied
– Assembled, wired and tested.
Finish
–Z
inc-passivated front cover plate, powdercoated, smooth in RAL 7035 light-grey.
LUF20161
Note
Please also order specific mains cable.
LUF20124
LUF20175
Name
Model
Electrical connection
P(W)
·
V (m3/h)
∆P(Pa)
p(dB(A))
Order No.
UP
CoolBlastT 230V 3-piece
Regulated SP
100...253 VAC; 50/60 Hz
25
553
68
49.6
03.027.321.1
1 unit
CoolBlastT 230V 6-piece
Regulated SP
100...253 VAC; 50/60 Hz
48
1106
68
53.3
03.027.322.1
1 unit
CoolBlastT 230V 3-piece
Regulated HP
100...253 VAC; 50/60 Hz
32
711
173
55.8
03.027.324.1
1 unit
CoolBlastT 230V 6-piece
Regulated HP
100...253 VAC; 50/60 Hz
62
1422
173
59.1
03.027.325.1
1 unit
Dimensions in mm:
Conversion:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
U = Standard rack unit
(1 U = 44.45 mm)
V
.
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆V
= Air-flow volume loss (%)
UP = Ultra High Performance
∆P
= Pressure increase (Pa)
n = Number of fans
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
1 mm = 0.03937 inch
UP = Packaging unit
.
HP = High Performance
V = Voltage
(400V = 3-phase)
kg = Weight
=S
ound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
Accessories | 137
Knürr Fan Units
Fan Top Cover for Knürr CoolBlast®
–Used with CoolBlast fan unit.
– Suitable for installation in Miracel.
– With cable routing (sliding plate).
–Two-part cover to facilitate
retrofitting and servicing.
How supplied
– Pre-assembled.
Material
– Sheet steel.
LUF20163
Scope of delivery
– 1 x cover panel with cover strip
and cable entry.
– 2 x covers.
Finish / Color
– F inal digit of order number .1:
Powder-coated texture, RAL 7035,
light-grey (e. g. X=1; 01.149.031.X=
01.149.031.1=light-grey).
– F inal digit of order number .8:
Powder-coated texture,
RAL 7021 dark-grey (e. g. X=8;
01.149.031.X=01.149.031.8=dark-grey).
LUF20176
(without fan)
LUF20169
W
D
Model
Order No.
UP
600
600
For 2 or 3-piece
01.149.031.X
1 unit
700
600
For 2 or 3-piece
01.149.041.X
1 unit
800
600
For 2 or 3-piece
01.149.051.X
1 unit
600
800
For 2, 3 or 6-piece
01.149.033.X
1 unit
700
800
For 2, 3 or 6-piece
01.149.043.X
1 unit
800
800
For 2, 3 or 6-piece
01.149.053.X
1 unit
600
900
For 2, 3 or 6-piece
01.149.034.X
1 unit
700
900
For 2, 3 or 6-piece
01.149.044.X
1 unit
800
900
For 2, 3 or 6-piece
01.149.054.X
1 unit
600
1000
For 2, 3 or 6-piece
01.149.035.X
1 unit
700
1000
For 2, 3 or 6-piece
01.149.045.X
1 unit
800
1000
For 2, 3 or 6-piece
01.149.055.X
1 unit
600
1200
For 2, 3 or 6-piece
01.149.037.X
1 unit
800
1200
For 2, 3 or 6-piece
01.149.057.X
1 unit
Model
Order No.
UP
For 2, 3 and 6-piece fan unit
01.149.101.9
1 set
CoolBlast® Dust/Particle Protection
Solution 1: Filter Mat
LUF20121
–Used with CoolBlast® fan top cover.
–Simple filter cover preventing the ingress of
dust when the fan stops (regulated or thermostat-controlled version available).
–For all top-cover sizes; filter and adhesive tape
can be cut to the required length.
Material
– Filedon (filter class G2).
Scope of delivery
– 1 x filter.
– 1 x Adhesive tape.
How supplied
– In sets.
LUF20168
138 | Accessories
Knürr Fan Units
Knürr CoolBlast® Dust/Particle Protection
Solution 2: Vent Cover
LUF20174
–Used with CoolBlast fan top cover.
–Closed cover panel with cable entry for
protection against foreign particles and dust.
–Mounting on the spacer bolts
on the standard cover.
Finish / Color
– Final digit of order number 1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Material
– Sheet steel.
Scope of delivery
– 1 x cover panel with cable entry.
How supplied
– In sets.
LUF20172
LUF20177
W
D
Model
Order No.
UP
600
600
with cable entry
01.149.031.X
1 unit
700
600
with cable entry
01.149.041.X
1 unit
800
600
with cable entry
01.149.051.X
1 unit
600
800
with cable entry
01.149.033.X
1 unit
700
800
with cable entry
01.149.043.X
1 unit
800
800
with cable entry
01.149.053.X
1 unit
600
900
with cable entry
01.149.034.X
1 unit
700
900
with cable entry
01.149.044.X
1 unit
800
900
with cable entry
01.149.054.X
1 unit
600
1000
with cable entry
01.149.035.X
1 unit
700
1000
with cable entry
01.149.045.X
1 unit
800
1000
with cable entry
01.149.055.X
1 unit
600
1200
with cable entry
01.149.037.X
1 unit
800
1200
with cable entry
01.149.057.X
1 unit
600
600
closed
01.130.690.X
1 unit
700
600
closed
01.130.694.X
1 unit
800
600
closed
01.130.691.X
1 unit
600
800
closed
01.130.691.X
1 unit
700
800
closed
01.130.695.X
1 unit
800
800
closed
01.130.699.X
1 unit
600
900
closed
01.130.692.X
1 unit
700
900
closed
01.130.696.X
1 unit
800
900
closed
01.130.700.X
1 unit
600
1000
closed
01.127.700.X
1 unit
700
1000
closed
01.127.701.X
1 unit
800
1000
closed
01.127.702.X
1 unit
LUF20178
Accessories | 139
Knürr Fan Units
19" Knürr CoolBlast® Fan Unit
Unregulated and thermostat-controlled
–Fan unit for vertical ventilation
of modules in 19" racks.
–Chassis rails are recommended for mounting.
Chassis rails are required with 6-piece CoolBlast
(use chassis runner, adjustable depth).
–Thermostat-controlled model:
Fan function (ON/OFF) thermostat-controlled;
setting range from 0° to + 60° C.
LUF20125
Compliance
– CE marking compliant with
Low Voltage Directive 73/23/EEC;
EMC directive 89/366/EEC.
Scope of delivery
– 1 x CoolBlast fan unit,
packed with operating instructions.
– 1 x connection cable, 2 m; Euro power plugs
and sockets.
Material
– Sheet steel, high-grade steel grid.
Finish / Color
– Enclosure zinc-passivated.
– F ront cover plate, powder-coated,
smooth in RAL 7035 light-grey.
LUF20139
How supplied
– Assembled, wired and tested.
Note
Please also order specific mains cable.
Name
W
H
D
kg
n
Electrical connection
P(W)
·
V (m3/h)
∆P(Pa)
p(dB(A))
Order No.
CoolBlast 230V 3-piece, thermostat
440
43.6
230
3
3
207 ... 253VAC; 50/60Hz
45
495
74
45.2
03.027.011.1
CoolBlast 230V 6-piece, thermostat
440
43.6
390
6
6
207 ... 253VAC; 50/60Hz
90
990
74
48.8
03.027.012.1
CoolBlast 115V 3-piece, thermostat
440
43.6
230
3
3
103.5 ... 126.5VAC; 50/60Hz
44
576
88
47.3
03.027.014.1
CoolBlast 115V 6-piece, thermostat
440
43.6
390
6
6
103.5 ... 126.5VAC; 50/60Hz
88
1152
88
50.8
03.027.015.1
CoolBlast 24V 3-piece SP
440
43.6
230
2.5
3
12...27 VDC
23
553
68
49.6
03.027.031.1
CoolBlast 24V 6-piece SP
440
43.6
390
5
6
12...27 VDC
46
1106
68
53.3
03.027.032.1
Technical data for Axial Single Fan
Knürr CoolBlast®
Knürr CoolBlast®
Knürr CoolBlast®
Knürr CoolBlast®
Knürr CoolBlast®
Item number
01.914.070.9
01.914.075.9
01.914.050.9
01.914.051.9
01.914.051.9-2
Dim: L x W x H
119 x 119 x 38
119 x 119 x 38
119 x 119 x 38
119 x 119 x 38
119 x 119 x 38
Max. volume flow, free blowing:
184.2 m3/h
237 m33/h
192 m3/h
165 m3/h
120 m3/h
Voltage
24 VDC
24 VDC
115 VAC
230 VAC
230 VAC
50 Hz
50 Hz
50 Hz
14.5 W
15 W
7.5 W
Frequency
Power consumption
7.4 W
11 W
Noise, free blowing
43 dB(A)
59 dB(A)
41 dB(A)
38 dB(A)
32 dB(A)
Bearing system
Ball bearing
Ball bearing
Ball bearing
Ball bearing
Ball bearing
Nominal speed
2950 min-1
4400 min-1
2900 min-1
2600 min-1
2100 min-1
Permitted ambient temp.
-10 °C to + 70 °C
-30 °C to + 55 °C
-40 °C to + 60 °C
-40 °C to + 60 °C
-40 °C to + 70 °C
Service life, L10 at 40°C
75,000 h
70,000 h
43,500 h
43,500 h
43,500 h
Compliance
CE, VDE
CE, VDE
CE, VDE
CE, VDE
CE, VDE
Use in fan unit:
03.027.021.1
03.027.022.1
03.027.051.1
03.027.052.1
03.027.321.1
03.027.322.1
03.027.024.1
03.027.025.1
03.027.054.1
03.027.055.1
03.027.324.1
03.027.325.1
03.027.014.1
03.027.015.1
03.027.011.1
03.027.012.1
03.027.301.1
03.027.302.1
03.027.310.1
03.027.311.1
03.027.312.1
02.111.180.9
05.010.306.1
01.243.428.1
03.028.110.8
02.111.181.9
05.010.307.1
140 | Accessories
Knürr Fan Units
19" Knürr CoolBlast® Fan Unit
Speed-controlled
–Fan unit for vertical ventilation
of modules in 19" racks.
–Reference temperature can be set
(20°C to 55°C).
–Speed control, 30 to 100 %; if sensor fails,
100 % rotation.
– Individual fan monitoring.
–Potential-free alarm output for
excess temperature alarm and fan failure.
–Visual status display for O.K.,
excess temperature and fan failure.
–Acoustic alarm can be switched off with switch.
–Chassis rails are recommended for mounting.
Chassis rails are required with 6-piece CoolBlast
(use chassis runner, adjustable depth).
LUF20128
LUF20140
Compliance
– CE marking compliant with
Low Voltage Directive 73/23/EEC;
EMC directive 89/366/EEC.
Scope of delivery
– 1 x CoolBlast fan unit, packed with operating
instructions.
– 1 x sensor cable, 2 m (plug-in).
– 1 x signal cable, 2 m (plug-in).
Only with DC devices:
– 1 x connection cable, 2 m with connector
plug and free ends.
Only with AC devices:
– 1 x connection cable, 2 m; Euro power
plugs and sockets.
Material
– Sheet steel, high-grade steel grid.
How supplied
– Assembled, wired and tested.
Finish / Color
– Enclosure zinc-passivated.
– F ront cover plate, powder-coated,
smooth in RAL 7035 light-grey.
Note
Further project-specific characteristics
can be realized in line with standards.
LUF20054
LUF20179
Name
W
H
D
kg
n
Electrical connection
P(W)
·
V (m3/h)
∆P(Pa)
p(dB(A))
Order No.
CoolBlast 115/230V, 3-piece, controlled SP
440
43.6
230
3.2
3
100 to 253VAC; 50/60Hz
25
553
68
49.6
03.027.021.1
CoolBlast 115/230V, 6-piece, controlled SP
440
43.6
390
6.2
6
100 to 253VAC; 50/60Hz
48
1106
68
53.3
03.027.022.1
CoolBlast 115/230V, 3-piece, controlled HP
440
43.6
230
3.2
3
100 to 253VAC; 50/60Hz
32
711
173
55.8
03.027.024.1
CoolBlast 115/230V, 6-piece, controlled HP
440
43.6
390
6.2
6
100 to 253VAC; 50/60Hz
62
1422
173
59.1
03.027.025.1
CoolBlast 24/48V, 3-piece, controlled SP
440
43.6
230
3.1
3
20 to 60VDC
25
553
68
49.6
03.027.051.1
CoolBlast 24/48V, 6-piece, controlled SP
440
43.6
390
6.1
6
20 to 60VDC
48
1106
68
53.3
03.027.052.1
CoolBlast 24/48V, 3-piece, controlled HP
440
43.6
230
3.1
3
20 to 60VDC
32
711
173
55.8
03.027.054.1
CoolBlast 24/48V, 6-piece, controlled HP
440
43.6
390
6.1
6
20 to 60VDC
62
1422
173
59.1
03.027.055.1
Accessories | 141
Knürr Fan Units
Knürr CoolBlast® – Air-flow
Routing via Front Intake, 1 U
– The "front-intake unit" for the Knürr
CoolBlast fan delivers targeted cooling for
module supports arranged on top of each
other (heat sources).
–For Knürr CoolBlast slot-in unit
3- and 6 piece for front intake.
– Used as cooling baffle.
–Can be supplemented with front plate
and filter mat.
19" Filter Unit, 1 U
–Suitable for use with CoolBlast slot-in unit.
– Adjusted to the respective recess depth.
LUF00205
Material
– Sheet steel.
Scope of delivery
– 1 x air-flow guide.
How supplied
– Single items.
LUF20142
H
D
Model
Order No.
UP
43.6
230
For 3-piece
03.027.094.1
1 unit
43.6
390
For 6-piece
03.027.095.1
1 unit
Filter class
– G2.
Finish / Color
– Powder-coated texture, RAL 7035.
– Light-grey.
LUF20131
Material
– Enclosure: sheet steel.
– Front cover plate: ABS (UL94 V-0).
– Handle: extruded aluminum.
– Filter: Viledon P 15/150.
Finish / Color
– Enclosure: powder-coated texture,
RAL 9011 dark-grey.
– Front cover plate: RAL 7035, light-grey.
– Handle: powder-coated texture,
RAL 5008 grey-blue.
LUF20156
Scope of delivery
– 1 x filter insert.
– 1 x filter.
How supplied
– Single items.
H
D
kg
Order No.
UP
43.6
282
2.0
03.025.250.1
1 unit
43.6
660
4.0
03.025.253.1
1 unit
Knürr CoolBlast® Front Plate
–For use with air-flow guide for front
intake.
– Can be retrofitted.
LUF20136
Material
– Sheet steel.
Finish / Color
– Powder-coated, RAL 7035.
– Light-grey, smooth.
Scope of delivery
– 1 x front plate.
How supplied
– Single items.
H
Order No.
UP
43.6
03.027.097.1
1 unit
Dimensions in mm:
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
U = Standard rack unit
(1 U = 44.45 mm)
V
.
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆V
= Air-flow volume loss (%)
UP = Ultra High Performance
∆P
= Pressure increase (Pa)
n = Number of fans
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
kg = Weight
UP = Packaging unit
.
HP = High Performance
V = Voltage
(400V = 3-phase)
142 | Accessories
Conversion:
W = Width
= Sound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
Knürr Fan Units
Knürr CoolBlast®
Filter for Front Intake
Replacement Filter
–For use with air-flow routing via front
intake.
–Can be retrofitted; filter can also be
replaced during operation.
LUF20135
– For 19" filter insert.
Material
– Filter: Viledon P 15/150.
Filter class
– G2.
LUF00280
Filter class
– G2.
Material
Viledon K15/150.
Scope of delivery
– 1 x filter.
Scope of delivery
– 1 x filter.
How supplied
– Single items.
How supplied
– Single items.
W
D
Model
Order No.
UP
400
160
For 3-piece
03.027.098.1
1 unit
400
320
For 6-piece
03.027.099.1
1 unit
D
Order No.
UP
282
03.025.246.9
1 unit
660
03.025.249.9
1 unit
Silent Top-mounting Fan
LUF20194
–Used for applications with silent environment
(e. g. offices).
– Suitable for installation in Miracel.
–High volume flow with low noise generation
(e.g. for office applications).
Finish / Color
– Final digit of order number 1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Material / Finish
– Sheet steel.
Scope of delivery
– 1 x top-mounting fan.
– 1 x mains cable, 3 m with safety plug
(230 VAC).
– 1 x Mounting kit.
Technical data for single fan
– Max. volume flow (free blowing): –1500 m3/h.
– Voltage / frequency: 230 V / 50 Hz.
– Power consumption: 117 W.
– Noise level: 40 dB(A).
– Temperature range: -25 to 40°C.
How supplied
– In sets.
Note
Please also order suitable cover panel.
LUF20195
W
H
D
For rack type
Order No.
UP
449
237
490
Miracel
03.028.111.X
1 unit
Accessories | 143
Knürr Fan Units
Fan Top Cover for Silent, Top-mounting Fan
LUF20163
–Used with silent-fan top cover.
– Suitable for installation in Miracel.
– With cable routing (sliding plate).
–Two-part cover to facilitate
retrofitting and servicing.
Finish / Color
– Final digit of order number 1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Material / Finish
– Sheet steel.
Scope of delivery
– 1 x cover panel with cover strip and cable
entry.
– 1 x Mounting kit.
How supplied
– In sets.
LUF20195
144 | Accessories
W
D
For rack type
Order No.
UP
600
600
Miracel
01.149.201.x
1 unit
700
600
Miracel
01.149.202.x
1 unit
800
600
Miracel
01.149.203.x
1 unit
600
800
Miracel
01.149.206.x
1 unit
700
800
Miracel
01.149.207.x
1 unit
800
800
Miracel
01.149.208.x
1 unit
600
900
Miracel
01.149.211.x
1 unit
700
900
Miracel
01.149.212.x
1 unit
800
900
Miracel
01.149.213.x
1 unit
600
1000
Miracel
01.149.216.x
1 unit
700
1000
Miracel
01.149.217.x
1 unit
800
1000
Miracel
01.149.218.x
1 unit
600
1200
Miracel
01.149.221.x
1 unit
700
1200
Miracel
01.149.222.x
1 unit
800
1200
Miracel
01.149.223.x
1 unit
Knürr Fan Units
Filter Fan
– For specific use where hot spots occur.
–Also suitable for retrofitting, quick and easy.
–The filter mats provide high-level filtration,
are easily exchanged and can be cleaned.
–These maintenance-free fans feature a long
service life and low noise levels.
–Air-flow routing: blows into the rack (pre-set).
– Can be used to draw in or move air out.
Material
– Heat-resistant ABS plastic,UL 94 V-0.
Color
– RAL 7035 light-grey.
Compliance
– CE marking.
Protection rating
– IP 54.
LUF20057
LUF80011
LUF800040
LUF80012
LUF20058
LxW
D/l/x
y/z
kg
Max. AF
El. conn.
L
G
N
Service life/40º Model
Order No.
UP
150 x 150
71/120/5
125/131
0.812
57 m3/h
230V / 50/60Hz
20 W
43 dB(A)
2650/min
40,000 h
Filter fan
03.026.501.1
1 unit
204 x 204
90/120/5.7 177/185
1
90 m3/h
230V / 50/60Hz
20 W
43 dB(A)
2650/min
40,000 h
Filter fan
03.026.502.1
1 unit
250 x 250
113/172/6
223/230
1.690
240m3/h
230V / 50/60Hz
29 W
50 dB(A)
2800/min
40,000 h
Filter fan
03.026.503.1
1 unit
325 x 325
125/208/7
291/302
3.620
520m3/h
230V / 50/60Hz
67 W
63 dB(A)
2770/min
50,000 h
Filter fan
03.026.504.1
1 unit
150 x 150
24/5
125/131
0.140
Exit filter
03.026.511.1
1 unit
204 x 204
20.5/5.7
177/185
0.275
Exit filter
03.026.512.1
1 unit
250 x 250
25/6
223/230
0.440
Exit filter
03.026.513.1
1 unit
325 x 325
26/7
291/302
0.780
Exit filter
03.026.514.1
1 unit
150 x 150
Replacement filter mat 03.026.521.9
6 unit
204 x 204
Replacement filter mat 03.026.522.9
6 unit
250 x 250
Replacement filter mat 03.026.523.9
6 unit
325 x 325
Replacement filter mat 03.026.524.9
6 unit
Dimensions in mm:
Conversion:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
U = Standard rack unit
(1 U = 44.45 mm)
V
.
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆V
= Air-flow volume loss (%)
UP = Ultra High Performance
∆P
= Pressure increase (Pa)
n = Number of fans
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
1 mm = 0.03937 inch
UP = Packaging unit
.
HP = High Performance
V = Voltage
(400V = 3-phase)
kg = Weight
= Sound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
Accessories | 145
Knürr Fan Units
Bracket for
Temperature Module
Temperature Module
LUF00237a
–For monitoring the inside temperature
of the rack.
– Temperature display (+ 10°C to + 70°C).
–Alarm temperature set via potentiometer
at the front.
– Visual alarm display (LED red).
–Alarm signaling via potential-free
switching contact (1 changeover contact
250 VAC / 8 A).
– Power supply 230 V / 50 Hz.
–For non-standard temperature module
installation, e.g., on the side of the
19" extrusion.
LUF00255
Material
– Plastic.
Material / Finish
– Aluminum, 2 mm, polished.
Scope of delivery
– 1 x bracket.
– 1 x Mounting kit.
How supplied
– In sets.
Compliance
– CE marking compliant with Low Voltage
Directive 73/23/EEC; EMC directive
89/336/EEC.
Scope of delivery
– 1 x Temperature module.
– 1 x Temperature sensor (3 m).
How supplied
– Assembled, wired and tested.
Order No.
UP
01.117.527.0
1 unit
Thermostat
Order No.
UP
01.117.525.1
1 unit
19" Front Plate
1 U for Temperature Module
LUF20000
–For monitoring the inside temperature
of the rack with respect to slot-in units
and heating fans.
– Setting range: + 10°C to + 60°C.
–Switching temperature difference
(hysteresis) 2 K.
– Contact type: 1 changeover contact.
– Sensor: thermo-bimetal.
–Contact rating: 230 VAC/10 A (heating),
5 A (cooling).
– Interference suppression: compliant
with DIN 55014.
– For temperature module installation.
LUF00256
Material / Finish
– Sheet steel, 1.5 mm, powder-coated
texture.
Material
– Plastic.
Protection rating
– IP 30.
Color
– RAL 7035 light-grey.
146 | Accessories
Scope of delivery
– 1 x 19" front plate.
Order No.
UP
01.117.526.1
1 unit
Compliance
– CE marking compliant with Low
Voltage Directive 73/23/EEC;
EMC directive 89/336/EEC.
Dimensions
– 74 x 74 x 23 mm.
Scope of delivery
– 1 x thermostat.
– 1 x mounting bracket.
– 1 x Mounting kit.
Order No.
UP
01.113.384.3
1 unit
Knürr Fan Units
Euro Mains Cable
for Swiss Standard
–Mains plug: Type 12 - Euro socket IEC 320.
– Cable: H05VV-F 3G 1 mm2.
DOS00077
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
L
Order No.
UP
2000
04.000.055.9
1 unit
Euro Plug
Connection Cable
–Mains plug: IEC 320 - Euro socket IEC 320.
– Cable: H05VV-F 3G 1 mm2.
DOS00519
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
L
Order No.
UP
900
04.000.051.9
1 unit
Euro Mains Cable
for British Standard
–Mains plug: Type BS 1363 IEC320 Euro socket.
– Cable: H05VV-F 3G 1 mm2.
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
DOS00078
L
Order No.
UP
2000
04.000.056.9
1 unit
Dimensions in mm:
Conversion:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
U = Standard rack unit
(1 U = 44.45 mm)
V
.
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆V
= Air-flow volume loss (%)
UP = Ultra High Performance
∆P
= Pressure increase (Pa)
n = Number of fans
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
1 mm = 0.03937 inch
UP = Packaging unit
.
HP = High Performance
V = Voltage
(400V = 3-phase)
kg = Weight
=S
ound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
Accessories | 147
Knürr Smaract®
Knürr Smaract®
Compact Rack
Features
Ample space for components and
cabling provided in an efficient,
compact design.
The innovative frame concept with
triangular extrusions ensures low
weight while maintaining high
stability.
Modular, stackable construction.
Easy access from all sides for
installation and maintenance –
hinged doors and side panels
can be quickly removed.
Secured access: The side panels
can only be removed once the front
or rear door has been opened.
The patented mounting hole rails
in the 19" extrusion ensure that all
components can be positioned
quickly and easily.
Doors and side panels have an
180° opening angle.
Available as server compact rack:
Perforation of front and
rear doors > 80 %.
Available as EMC and IP version
(also IP-EMC combination).
148 | Mechanics – Enclosure
The Smaract® Compact Rack is an innovative and practical 19" enclosure
with extremely low space requirements that is highly flexible and efficient.
At the same time, it facilitates integration and modular expansion,
delivering a wide range of impressive detailed solutions.
Knürr Smaract is an ideal, compact 19" platform available in various models that
meet IP and EMC requirements.
Knürr Smaract®
Knürr Smaract®
Knürr Smaract®
Main features
Access
Access from all sides is a time-saving
factor, e. g. for integration of
components and for maintenance. (1)
Intelligent construction
Innovative frame concept delivers low
weight while providing high stability
with new triangular extrusions. (2)
1. SMA20006
4. SMA20126
Modular concept: simple expansion
with stackability
Provides adequate space on the side
for cabling; cable entry on rear door.
(3)
Cable management
Well prepared to have and easy and
self-explanatory cabling. (4)
EMC and IP version
The compact rack can be upgraded
to IP or EMC standard at all times.
(Also in combined IP/EMC version).
(5)
2. SMA20005
5. SMA20046
3. SMA20004
6. SMA20017
150 | Mechanics – Enclosure
Forward-thinking solutions
Flexibility due to integration of 19"
technology.
6 heights to choose from; 9 U to 24 U.
(6)
Knürr Smaract®
Knürr Smaract® 19" Rack Compliant with IEC 297
Technical data
19" components compliant with
IEC 297-3
– Height: 9 U to 24 U
1 U = 44.45 mm.
– Width: 482.6 mm (19").
– Depths: 600, 800, 900 and 1000
mm.
Versions
– IP 20.
– IP 54.
– EMC.
SMA20067
Available space
– 82 % of the basic surface can be
used as space for installation and
cable routing.
Configuration
– Fixed, on leveling feet.
– Mobile, on casters with snib.
Tests dependent on design
– Safety compliant with EN 50298
and EN 60950.
– Protective conductor/grounding
compliant with DIN VDE 0701-1.
– Vibration test compliant with
MIL-STD 810 E.
– Vibration and shock test compliant
with DIN EN 300019-2-2.
– IP test compliant with DIN EN 60529.
– EMC shielding attenuation com­
pliant with IEEE-STD-299 and VG 95
373 part 15 (30 MHz - 1 GHz).
– Plastic components as per UL94
V-0.
Applications
SMA20166
SMA20109
SMA20181
SMA20009
SMA20122
Mechanics – Enclosure | 151
Knürr Smaract®
Knürr Smaract® 19" Compact Rack
with Glass Door
d
D
SMA20024
– For components compliant with IEC 297-3.
–Access from all sides with removable covers.
–Flexible assembly of the components using
mounting holes.
–Cable entry via rear panel (optional via
top cover/bottom cover).
–Heat loss discharge via own convection or
with fan unit on the rear panel (accessory).
– Door opening angle, 180°.
– Front door with safety glass, lockable.
Color
– RAL 7035, light-grey.
Jumpering space
– F ront 110 mm.
Scope of delivery
– 1 x basic rack.
– 2 x side panels, closed; hinged on both sides.
– 1 x top cover, closed.
– 1 x glass front door, lockable.
– 1 x rear door with cable entry, lockable,
prepared for ventilation unit.
– 4 x 19" sheet steel vertical extrusions.
– 1 x grounding set.
– 4 x leveling feet.
Load rating
–2
000 N static.
How supplied
– Assembled.
Protection rating
– IP 20.
Material / Finish
–B
asic rack, extruded aluminum, polished.
–C
orner connector, die-cast, polished.
–C
overs, sheet steel, powder-coated texture.
–G
lass infill front door, single safety glass panel.
W
H
D
U
d (max.)
kg
Model
Order No.
UP
600
478
600
9
450
16
With 19" mount. hole extru.
02.110.057.1
1 unit
600
612
600
12
450
20
With 19" mount. hole extru.
02.110.062.1
1 unit
600
745
600
15
450
24
With 19" mount. hole extru.
02.110.067.1
1 unit
600
879
600
18
450
28
With 19" mount. hole extru.
02.110.072.1
1 unit
600
1012
600
21
450
32
With 19" mount. hole extru.
02.110.077.1
1 unit
600
1145
600
24
450
36
With 19" mount. hole extru.
02.110.082.1
1 unit
SMA20026
152 | Mechanics – Enclosure
600
478
800
9
650
19
With 19" mount. hole extru.
02.110.059.1
1 unit
600
612
800
12
650
23
With 19" mount. hole extru.
02.110.064.1
1 unit
600
745
800
15
650
27
With 19" mount. hole extru.
02.110.069.1
1 unit
600
879
800
18
650
31
With 19" mount. hole extru.
02.110.074.1
1 unit
600
1012
800
21
650
35
With 19" mount. hole extru.
02.110.079.1
1 unit
600
1145
800
24
650
39
With 19" mount. hole extru.
02.110.084.1
1 unit
Knürr Smaract®
Knürr Smaract® 19" Server Compact Rack
with Perforated Door
– For components compliant with IEC 297-3.
–Access from all sides, removable covers.
–With special 19" server extrusions for mounting
trade-standard servers.
–With perforated doors on the front and rear
(hexagonal holes with large flow cross-section)
for optimal airflow.
–Door opening angle, 180°.
Jumpering space
– F ront 75 mm.
SMA20067
Flow cross-section
–1
150 cm2 with 9 U.
– 1950 cm2 with 15 U.
– 2700 cm2 with 21 U.
– 3100 cm2 with 24 U.
Material / Finish
–B
asic rack, extruded aluminum, polished.
–C
orner connector, die-cast, polished.
–C
overs, sheet steel, powder-coated texture.
Color
– Final digit of order number .1:
RAL 7035, light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Scope of delivery
– 1 x basic rack.
– 2 x side panels, closed, hinged on both sides.
– 1 x top cover, closed.
– 1 x front door with perforation, lockable.
– 1 x rear door with perforation, lockable.
– 4 x 19" server sheet-steel extrusions with
mounting holes.
– 1 x grounding set.
– 4 x leveling feet.
Note
Order mounting adapters for 19" server
extrusion for mounting Knürr accessories.
Set with 4 adapters order number
01.127.119.9.
W
H
D
U
d
kg
Model
Order No.
UP
600
478
900
9
740
21
Door without frame
02.110.010.1
1 unit
600
478
900
9
740
21
Door without frame
02.110.010.8
1 unit
600
745
900
15
740
29
Door with frame
02.110.020.1
1 unit
600
745
900
15
740
29
Door with frame
02.110.020.8
1 unit
600
1012
900
21
740
37
Door with frame
02.110.030.1
1 unit
600
1012
900
21
740
37
Door with frame
02.110.030.8
1 unit
600
1145
900
24
740
41
Door with frame
02.110.035.1
1 unit
600
1145
900
24
740
41
Door with frame
02.110.035.8
1 unit
600
1145
1000
24
740
43
Door with frame
02.110.040.1
1 unit
600
1145
1000
24
740
43
Door with frame
02.110.040.8
1 unit
SMA20060
Dimensions in mm:
W =Width
h =Installation height
H =Height
d =Usable depth
D =Depth
L =Length
Conversion:
U =Standard rack unit
(1 U = 44.45 mm)
kg =Weight
1 mm =0.03937 inch
1 kg =2.2046 pounds
UP =Packaging unit
Mechanics – Enclosure | 153
Knürr Smaract®
Knürr Smaract® 19" Compact Rack
Enclosure without door
– For components in acc. with IEC 297-3.
– Removable covers.
Load rating
–2
000 N static.
Material/Finish
–B
asic rack, extruded aluminum, polished.
–C
orner connector, die-cast, polished.
–C
overs, sheet steel, powder-coated texture.
Color
–R
AL 7035 light-grey.
Supply schedule
– 1 x basic rack.
– 2 x side panels, closed, hinged on both sides.
– 1 x top cover, closed.
– 1 x trim frame, front.
– 1 x rear door with cable entry, lockable,
prepared for ventilation unit.
– 2 x 19" aluminum vertical extrusions, front,
with T-slot.
– 1 x earthing set.
– 4 x leveling feet.
How supplied
– Assembled.
SMA20025
Note
If required, please also order 19" extrusions
for rear 19" level.
W
H
D
U
kg
Order no.
UP
600
478
600
9
16
02.110.107.1
1 unit
600
745
600
15
24
02.110.117.1
1 unit
600
1012
600
21
28
02.110.127.1
1 unit
600
478
800
9
19
02.110.109.1
1 unit
600
745
800
15
25
02.110.119.1
1 unit
600
1012
800
21
31
02.110.129.1
1 unit
SMA20027
SMA20042
Dimensions in mm:
154 | Mechanics – Enclosure
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
1 U = 44.45 mm
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr Smaract®
Knürr Smaract® Glass Door
with Swing Handle
– Can be used as front and rear door.
–With swing handle for mounting a profile
half-cylinder lock.
Material
–C
overs, sheet steel, powder-coated texture.
–G
lass infill, single safety glass panel.
Finish
– Powder-coated texture, RAL 7035 light-grey.
Scope of delivery
– 1 x glass door with swing handle.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20194
W
H
U
Model
Order No.
UP
600
478
9
Glass door
02.111.086.1
1 unit
600
612
12
Glass door
02.111.087.1
1 unit
600
745
15
Glass door
02.111.088.1
1 unit
600
879
18
Glass door
02.111.089.1
1 unit
600
1012
21
Glass door
02.111.090.1
1 unit
600
1143
24
Glass door
02.111.091.1
1 unit
Knürr Smaract® Door, perforated
with Swing Handle
– Can be used as front and rear door.
–With swing handle for mounting a profile
half-cylinder lock.
–Hexagonal holes with large flow cross-section.
Material
–C
overs, sheet steel, powder-coated texture.
Finish
– Final digit of order number .1:
powder-coated texture, RAL 7035,
light-grey.
– Final digit of order number .8:
powder-coated texture, RAL 7021
dark-grey.
Scope of delivery
– 1 x perforated door with swing handle.
– 1 x Mounting kit.
SMA20193
How supplied
– In sets.
W
H
U
Model
Order No.
UP
600
478
9
Perforated door
02.111.096.1
1 unit
600
612
12
Perforated door
02.111.097.1
1 unit
600
745
15
Perforated door
02.111.098.1
1 unit
600
879
18
Perforated door
02.111.099.1
1 unit
600
1012
21
Perforated door
02.111.100.1
1 unit
600
1143
24
Perforated door
02.111.101.1
1 unit
Mechanics – Enclosure | 155
Knürr Smaract®
Knürr Smaract®
Ventilation Unit
SMA20195
Knürr Smaract®
19" Steel Extrusion with
Mounting Holes
– Easily added onto a rear panel.
– With two axial fans.
– With thermostat.
–Available in two different performance
classes.
– For front and rear installation.
SMA20104
Technical data for single fan
– Type 1:
max. volume flow (free blowing):
162 m3/h.
Noise emission (free blowing): 37 dB(A).
–T
ype 2 (quiet):
max. volume flow (free blowing):
120 m3/h.
Noise emission (free blowing): 32 dB(A).
SMA20180
Material / Finish
– 19" extrusions: sheet steel,
zinc-passivated.
– Mounting bracket: sheet steel,
1.5 mm, zinc-passivated.
Technical data for thermostat
– Setting range: 0 to 60 °C.
– Mains supply: 240 V / 50 Hz.
– Nominal current: 16 A.
Scope of delivery
– 2 x 19" extrusions with mounting holes.
– 4 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20106
Material / Finish
– Zinc-passivated sheet steel.
Scope of delivery
– 1 x f an unit wired ready for connection,
with thermostat.
–1
x Mounting kit.
How supplied
– Pre-assembled.
Model
Order No.
UP
Type 1
02.111.180.9
1 unit
Type 2 (quiet)
02.111.181.9
1 unit
U
Order No.
UP
9
02.111.156.9
1 unit
12
02.111.157.9
1 unit
15
02.111.158.9
1 unit
18
02.111.159.9
1 unit
21
02.111.160.9
1 unit
24
02.111.161.9
1 unit
Mounting Adapters
for 19" Server Extrusion
–For mounting standard Knürr
components (storage shelves, drawers,
chassis rails, keyboard tray, etc.)
in 19" installation space.
Knürr Smaract®
19" Aluminum Extrusion with T-slot
MIR20044
– For front and rear installation.
SMA20103
Material / Finish
– 19" extrusions: extruded aluminum
polished.
–M
ounting bracket: Sheet steel,
zinc-passivated.
Material
– Zinc-passivated sheet steel.
Scope of delivery
– 4 x adapters.
Scope of delivery
– 2 x 1
9" extrusions with T-slot incl.
increment slides.
– 4 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
MIR20082
SMA20105
U
Order No.
UP
9
02.111.146.9
1 unit
12
02.111.147.9
1 unit
15
02.111.148.9
1 unit
18
02.111.149.9
1 unit
21
02.111.150.9
1 unit
24
02.111.151.9
1 unit
156 | Mechanics – Enclosure
U
Order No.
UP
1
01.127.119.9
1 unit
Knürr Smaract®
Knürr Smaract®
Depth Brace
Knürr Smaract®
Top/Bottom Cover with Cable Entry
– For additional strengthening of the
enclosure.
–For routing cables with cable ties and
as universal mounting option.
–With holes for mounting cage nuts.
– Variable positioning with T-slot.
– Installation on the frame extrusions.
SMA20172
– With integrated cable clamping.
– With brush strip for cable entry.
SMA20168
Material / Finish
– Sheet steel, powder-coated texture.
Color
– Final digit of order number .1:
RAL 7035, light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Material / Finish
– Sheet steel, zinc-passivated 1.5 mm.
Scope of delivery
– 1 x depth brace.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Not compatible with 19" server
extrusions.
SMA20173
D
Order No.
UP
Scope of delivery
– 1 x bottom cover with cable routing.
– 1 x brush strip.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
600
02.111.042.1
1 unit
600
800
02.111.044.1
1 unit
600
900
02.111.045.1
1 unit
600
02.111.002.0
1 unit
600
900
02.111.045.8
1 unit
800
02.111.004.0
1 unit
600
1000
02.111.046.1
1 unit
900
02.111.005.0
1 unit
600
1000
02.111.046.8
1 unit
Knürr Smaract®
Knürr Smaract®
Top Cover/Bottom Cover closed
Bottom Cover, perforated with Filter Mat
Material / Finish
– Sheet steel, powder-coated texture.
Color
– Final digit of order number .1:
RAL 7035, light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
SMA20028
– For cooling with air convection.
Material / Finish
– Bottom cover: sheet steel, powdercoated texture.
– Filter mat: Filedon
SMA20029
Scope of delivery
– 1 x bottom cover, closed.
– 1 x Mounting kit.
How supplied
– In sets.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x perforated bottom cover with filter
mat.
– 1 x Mounting kit.
Note
Use of the bottom cover in combination
with the stationary plinth is not possible.
W
D
Order No.
UP
600
600
02.111.052.1
1 unit
600
800
02.111.054.1
1 unit
600
900
02.111.055.1
1 unit
600
900
02.111.055.8
1 unit
600
1000
02.111.056.1
1 unit
600
1000
02.111.056.8
1 unit
How supplied
– In sets.
W
D
Order No.
UP
600
600
02.111.062.1
1 unit
600
800
02.111.064.1
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
1 U = 44.45 mm
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Enclosure | 157
Knürr Smaract®
Knürr Smaract®
Knürr Smaract® Plinth Cover Plate
with Cable Entry
Replacement Filter Mat for
perforated Bottom Cover
–Used with plinth.
– Used with perforated bottom cover.
Material / Finish
– Filedon.
SMA20058
Material / Finish
– Sheet steel, powder-coated texture.
Scope of delivery
– 1 x cover panel with cable entry.
– 1 x brush strip.
– 1 x Mounting kit.
SMA20098
Scope of delivery
– 5 x replacement filter mats.
How supplied
– In sets.
Color
– Final digit of order number .1:
RAL 7035, light-grey.
– Final digit of order number .8:
RAL 7021 dark-grey.
Model
Order No.
UP
for D600
02.111.068.9
5 units
For D800
02.111.069.9
5 units
Knürr Smaract®
Plinth
–Stationary.
–Cable entry possible from all sides.
–Panels front and rear with vent slots and
installation option for filter mat.
How supplied
– In sets.
W
H
Order No.
UP
600
100
02.111.206.1
1 unit
600
100
02.111.206.8
1 unit
Knürr Smaract®
Twin Caster
SMA20177
Material / Finish
– Sheet steel, powder-coated texture.
Color
– Final digit of order number .1:
RAL 7035, light-grey.
– F inal digit of order number .8:
RAL 7021 dark-grey.
–Height 50 mm.
Scope of delivery
– 4 x plinth corners.
– 2 x cover plates, closed.
– 2 x cover plates with vent slots.
– 1 x Mounting kit.
How supplied
– In sets.
Color
– RAL 9011, graphite black.
Load rating
– 400 N per caster.
– 1200 N max. static total load per rack.
Scope of delivery
– 2 x twin casters.
– 2 x fixed casters.
Standards
– Casters compliant with DIN 12530.
– Load compliant with DIN 12527.
How supplied
– In sets.
SMA20034
W
H
D
Order No.
UP
600
100
600
02.111.201.1
1 set
600
100
800
02.111.203.1
1 set
600
100
900
02.111.204.1
1 set
600
100
900
02.111.204.8
1 set
DOP00233
Dimensions in mm:
158 | Mechanics – Enclosure
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Order No.
UP
02.111.175.9
4 units
Conversion:
U = Standard rack unit
1 U = 44.45 mm
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr Smaract®
Knürr Smaract®
Stacking Set
Knürr Smaract®
Wall Mounting Bracket
–Fixed connection for stacking
compact racks.
SMA20035
Material / Finish
– Steel, cold rolled, zinc-passivated.
Scope of delivery
– 4 x stacking elements.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20094
Order No.
UP
02.111.171.9
4 unit
Material / Finish
– Sheet steel, powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 2 x wall mounting brackets.
– 1 x Drill hole template.
– 1 x Mounting kit.
Load rating
– 500 N.
How supplied
– In sets.
SMA20085
Knürr Smaract®
Eyebolt Set
W
Order No.
UP
600
02.111.220.9
1 set
– Mounted/fixed on crane hooks.
–Load rating, 1900 N static per ring screw.
MEC00074
Material / Finish
– Tool steel, forged.
Scope of delivery
– 4 x crane eyebolts.
How supplied
– In sets.
Grounding Bar
–For safe grounding or potential
equalization of equipments and
components.
Order No.
UP
01.243.440.9
4 units
Floor Fixing Kit
MIR00319
Material / Finish
– Sheet steel, 3.0 mm.
Finish
– Galvanized.
Material
– Electrolyte copper 9 x 9.
Scope of delivery
– 1 x grounding bar.
– 2 x brackets.
– 1 x Mounting kit.
ELM00068
U
Order No.
UP
12
01.110.703.9
1 unit
15
01.240.543.9
1 unit
18
01.240.544.9
1 unit
21
01.240.545.9
1 unit
24
01.240.546.9
1 unit
Scope of delivery
– 4 x fixing brackets.
Order No.
UP
01.130.934.7
1 unit
Contact Clamp
–Enables safe connection of equipment
and components to grounding bar.
– For cables up to 25 mm2.
DOP20016
Scope of delivery
– 20 x contact clamps.
Order No.
UP
01.110.715.9
20 units
Mechanics – Enclosure | 159
Knürr Smaract®
Knürr Smaract® 19" Compact Rack EMC
with sheet steel door
– For components compliant with IEC 297-3.
– Removable covers.
Load rating
– 2000 N static.
Material
– Basic frame: extruded aluminum.
– Panels: sheet steel.
– EMC spring: high-grade steel.
Finish
– Basic frame: polished.
–P
anels: powder-coated texture.
SMA20035
Scope of delivery
– 1 x basic rack.
– 2 x side panels, EMC, closed, hinged on both
sides.
– 1 x top cover, EMC, closed.
– 1 x bottom cover, EMC, closed.
– 1 x front door, EMC, closed, lockable.
– 1 x rear panel, EMC, closed, screwed.
– 2 x 19" front aluminum vertical extrusions
with T-slot incl. increment slide.
– 1 x grounding set.
– 4 x leveling feet.
How supplied
– Assembled.
Color
–R
AL 7035, light-grey.
W
H
D
U
kg
Order No.
UP
600
612
600
12
28
02.110.312.1
1 unit
600
879
600
18
36
02.110.322.1
1 unit
600
1146
600
24
44
02.110.332.1
1 unit
600
612
800
12
32
02.110.314.1
1 unit
600
879
800
18
40
02.110.324.1
1 unit
600
1146
800
24
48
02.110.334.1
1 unit
SMA20059
EMC measurements performed by pkm Electronic GmbH, Frontenhausen.
Tests were carried out in compliance with the following standard: VG 95373 Part 15.
Tested rack: width 600, depth 600, height 1150, closed version.
160 | Mechanics – Enclosure
Knürr Smaract®
Knürr Smaract®
Knürr Smaract®
Connection Plate, EMC, closed
Connection Plate, EMC, for Fan Unit
– EMC shielding.
–Screwed.
– EMC shielding.
–Screwed.
SMA20148
SMA20137
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
Finish
– Powder-coated texture.
Finish
– Powder-coated texture.
Color
– RAL 7035, light-grey.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate closed.
– 2 x brackets.
– 1 x Mounting kit.
Scope of delivery
– 1 x connection plate for fan unit.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
Note
Suitable fan unit: 02.111.180.9.
SMA20150
SMA20135
W
H
U
Order No.
UP
600
131.3
3
02.111.351.1
1 set
Knürr Smaract
®
W
H
U
Order No.
UP
600
264.6
6
02.111.372.1
1 set
Connection Plate, EMC, with Cable Entry
Knürr Smaract®
Rear Plate, EMC, closed
– EMC shielding.
–Screwed.
SMA20145
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
– EMC seal extrusion: with high-grade
steel grid; rubber.
– EMC shielding.
–Screwed.
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
Color
– RAL 7035, light-grey.
Finish
– Powder-coated texture.
Scope of delivery
– 1 x connection plate with cable entry.
– 2 x brackets.
– 1 x Mounting kit.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x rear plate closed.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20152
SMA20137
Finish
– Powder-coated texture.
How supplied
– In sets.
SMA20137
W
H
U
Order No.
UP
600
131.3
3
02.111.361.1
1 set
W
H
U
Order No.
UP
600
422.9
9
02.111.353.1
1 set
600
556.3
12
02.111.354.1
1 set
600
689.6
15
02.111.355.1
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Enclosure | 161
Knürr Smaract®
Knürr Smaract® 19" Compact Rack IP 54
with glass door
– For components compliant with IEC 297-3.
– Removable covers.
Color
– RAL 7035, light-grey.
Load rating
– 2000 N static.
Scope of delivery
– 1 x basic frame.
– 2 x side panels, IP 54, closed, hinged on both
sides.
– 1 x top cover, IP 54, closed.
– 1 x bottom cover, IP 54, closed.
– 1 x glass front door IP 54, lockable.
– 1 x rear panel, IP 54, closed, screwed.
– 2 x 19" aluminum vertical extrusions, front,
with T-slot incl. increment slide.
– 1 x grounding set.
– 4 x leveling feet.
Protection rating
– IP 54.
Material
– Basic frame: extruded aluminum.
– Panels: sheet steel.
– Foam seal: polyurethane.
SMA20062
SMA20108
162 | Mechanics – Enclosure
Finish
– Basic frame: polished.
– Panels: powder-coated texture.
How supplied
– Assembled.
W
H
D
U
kg
Order No.
UP
600
612
600
12
28
02.110.212.1
1 unit
600
879
600
18
36
02.110.222.1
1 unit
600
1146
600
24
44
02.110.232.1
1 unit
600
612
800
12
32
02.110.214.1
1 unit
600
879
800
18
40
02.110.224.1
1 unit
600
1146
800
24
48
02.110.234.1
1 unit
Knürr Smaract®
Knürr Smaract®
Knürr Smaract®
Connection Plate, IP54, Closed
Connection Plate, IP54, for Fan Unit
– Protection rating, IP 54.
–Screwed.
– Protection rating, IP 54
–Screwed.
SMA20148
Material
– Panel: sheet steel.
– Foam seal: polyurethane.
Finish
– Powder-coated texture.
SMA20138
SMA20143
Material
– Panels: sheet steel.
– Foam seal: polyurethane.
– Exit filter: ABS plastic, UL94 V-0.
Finish
– Powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate for fan unit.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Suitable fan unit: 02.111.180.9.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate closed.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20136
W
H
U
Order No.
UP
600
131.3
3
02.111.301.1
1 set
Knürr Smaract
®
Type 1
W
H
U
Order No.
UP
600
264.6
6
02.111.322.1
1 set
Connection Plate, IP54, with Cable Entry
Knürr Smaract®
Rear Panel, IP54, closed
– Possible sealing: IP 54.
–Screwed.
SMA20139
Type 2
Material
– Panel: sheet steel.
– Foam seal: polyurethane.
– Seal extrusion:
Type 1: sponge-rubber seal.
Type 2: polymeric reinforced with metal.
– Protection rating, IP 54.
–Screwed.
SMA20141
Material
– Panels: sheet steel.
– Foam seal: polyurethane.
Finish
– Powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x rear panel closed.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Finish
– Powder-coated texture.
SMA20169
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate with cable entry.
– 2 x brackets.
– 1 x Mounting kit.
SMA20138
How supplied
– In sets.
SMA20138
W
H
U
Model
Order No.
UP
W
H
U
Order No.
UP
600
131.3
3
Type 1
02.111.311.1
1 set
600
156.3
3
02.111.308.1
1 set
600
131.3
3
Type 2
02.111.312.1
1 set
600
289.6
6
02.111.302.1
1 set
600
422.9
9
02.111.303.1
1 set
600
556.3
12
02.111.304.1
1 set
600
689.6
15
02.111.305.1
1 set
600
823
18
02.111.306.1
1 set
600
956.3
21
02.111.307.1
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Enclosure | 163
Knürr DoubleProRack®
Knürr DoubleProRack®
Stand-Alone Enclosure
Features
Comprehensive 19" enclosure
range from the 6 U enclosure
to the 24 U compact rack.
Innovative design.
Optional with glass door or without
front door.
Integrated carrying handle
permits easy handling.
Version without front door is used
for applications, where direct
contact to controls is needed.
164 | Mechanics – Enclosure
DoubleProRack is the choice of rack if an innovative design is requested
for electronic and networking applications.
The DoubleProRack® is commonly used for electronic and networking
applications.
Knürr DoubleProRack®
Knürr DoubleProRack® 19" Enclosure Compliant with IEC 297-3
Technical data
Die-cast aluminum frame
construction connected with depth
and vertical extrusions made of
aluminum.
External dimensions
– Width: 554.4 mm.
–D
epths: 500, 600, 700 or 800 mm.
– Heights: 6 U to 24 U.
Installation space compliant with
IEC 297-3.
– Height 6 – 24 U
(1 U = 44.45 mm).
– Width 19".
Tests
– Vibration test compliant with
MIL-STD 810 D.
– NEMA 12 test.
Applications
DOP20019
DOP00225
DOP20037
DOP20028
Mechanics – Enclosure | 165
Knürr DoubleProRack®
Knürr DoubleProRack® 19" Stand-alone Enclosure
Description
– For components compliant with IEC 297-3.
– S ide covers and rear panel may be removed.
– F lexible assembly of components using T-slot
(also available with mounting holes).
– Cable entry via rear panel.
–H
eat loss discharge via convection on the rear
panel (optional with fan unit).
Jumpering space
– F ront 125 mm.
Material / Finish
– Covers, sheet steel, powder-coated texture.
– Die-cast aluminum frame.
– Extruded aluminum extrusions.
– Front door glass infill, single safety glass panel.
Color
– Panels RAL 7035 light-grey.
– Frame and extrusions, RAL 5008, grey-blue.
Scope of delivery
– 1 x frame rack incl. side covers.
– 1 x full glass door.
– 1 x rear panel with cable entry, 3 parts.
– 1 x panel, above, with vent slots.
– 1 x panel, below, with vent slots.
– 1 x 19" component set (4 vertical extrusions
with T-slot).
– 1 x grounding set with M8 grounding bolt.
Load rating
–1
500 N static.
DOP00256
Protection rating
– IP 20.
How supplied
– Assembled.
W
H
D
U
h
d (max.)
Model
Order No.
UP
554.4
577
600
12
532
435
With full glass door
01.246.643.1
1 unit
554.4
711
600
15
666
435
With full glass door
01.246.644.1
1 unit
554.4
844
600
18
799
435
With full glass door
01.246.645.1
1 unit
554.4
978
600
21
932
435
With full glass door
01.246.646.1
1 unit
554.4
1111
600
24
1066
435
With full glass door
01.246.647.1
1 unit
554.4
577
800
12
532
635
With full glass door
01.246.843.1
1 unit
554.4
711
800
15
666
635
With full glass door
01.246.844.1
1 unit
554.4
844
800
18
799
635
With full glass door
01.246.845.1
1 unit
554.4
978
800
21
932
635
With full glass door
01.246.846.1
1 unit
554.4
1111
800
24
1066
635
With full glass door
01.246.847.1
1 unit
DOP00230
Dimensions in mm:
166 | Mechanics – Enclosure
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
1 U = 44.45 mm
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr DoubleProRack®
Knürr DoubleProRack® 19" Enclosure without Front Door
Description
– F or components compliant with IEC 297-3.
– S ide covers and rear panel may be removed.
–H
eat loss discharge via convection on the rear
panel (optional with fan unit).
Scope of delivery
– 1 x frame rack incl. side covers.
– 1 x panel, above, with vent slots.
– 1 x panel, below, with vent slots.
– 1 x rear panel (from 12 U enclosure height
incl. 3 U vented cover plate).
– 2 x 19" extrusions, front, with mounting holes.
– 2 x 19" extrusions at the rear, T-slot.
Load rating
–1
500 N static.
Protection rating
– IP 20.
DOP00253
Color
– Panels RAL 7035 light-grey.
– Frame and extrusions, RAL 5008, grey-blue.
Material / Finish
–C
overs, sheet steel, powder-coated texture.
–D
ie-cast aluminum frame.
– Extruded aluminum extrusions.
How supplied
– Assembled.
W
H
D
U
h
d (max.)
kg
Model
Order No.
UP
554.4
311
500
6
265
460
12.5
Without door
01.243.506.1
1 unit
554.4
444
500
9
399
460
15.0
Without door
01.243.509.1
1 unit
554.4
577
500
12
532
460
17.0
Without door
01.243.512.1
1 unit
554.4
711
500
15
666
460
19.5
Without door
01.243.515.1
1 unit
554,4
311
600
6
265
560
14,0
Without door
01.243.606.1
1 unit
554.4
444
600
9
399
560
16.5
Without door
01.243.609.1
1 unit
554.4
577
600
12
532
560
19.0
Without door
01.243.612.1
1 unit
554.4
711
600
15
666
560
22.0
Without door
01.243.615.1
1 unit
554.4
844
600
18
799
560
24.5
Without door
01.243.618.1
1 unit
554.4
577
700
12
532
660
21.5
Without door
01.243.712.1
1 unit
554.4
711
700
15
666
660
24.0
Without door
01.243.715.1
1 unit
554.4
844
700
18
799
660
27.0
Without door
01.243.718.1
1 unit
554.4
978
700
21
932
660
29.5
Without door
01.243.721.1
1 unit
554.4
1111
700
24
1066
660
32.5
Without door
01.243.724.1
1 unit
DOP00052
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Enclosure | 167
Knürr DoubleProRack®
Knürr DoubleProRack®
Knürr DoubleProRack®
Fan Rear Panel 3 U
19" Installation, Front with T-slot
– With axial fans.
– With thermostat.
–Can also be used as second
mounting level.
DOP20004
Material
– Aluminum extrusions.
Finish
– Polished.
Technical data for single fan
– Max. volume flow (free blowing):
162 m3/h.
– Noise emission (free blowing): 37 dB(A).
DOP20035
Scope of delivery
– 2 x 19" extrusions at the front, T-slot.
– 1 x Mounting kit.
How supplied
– In sets.
DOP20036
Technical data for thermostat
– Setting range: 0 to 60°C.
– Mains supply: 240 V / 50 Hz.
– Nominal current: 16 A.
Scope of delivery
– 1 x fan rear panel, wired.
– 1 x Mounting kit.
Finish / Color
– Powder-coated texture,
RAL 7035 light-grey.
DOP00313
U
Order No.
UP
6
01.240.440.9
1 set
9
01.240.443.9
1 set
12
01.240.445.9
1 set
15
01.240.446.9
1 set
How supplied
– Assembled.
Note
Cannot be used in the enclosure's
lowest U.
18
01.240.447.9
1 set
W
H
U
Model
Order No.
UP
21
01.240.448.9
1 set
554.4
132.5
3
With thermostat
01.243.428.1
1 unit
24
01.240.449.9
1 set
Knürr DoubleProRack®
Rear Panel, closed
Knürr DoubleProRack
®
19" Installation, Front with Mounting Holes
– For DoubleProRack width 554.4 mm.
–Can also be used as second
mounting level.
DOP20005
Material
– Extruded aluminum extrusions.
Material / Finish
– Sheet steel, 0.8 mm, powder-coated
texture.
Finish
– Polished.
Color
– RAL 7035, light-grey.
Scope of delivery
– 2 x 1
9" extrusions at the front,
mounting holes.
Scope of delivery
– 1 x rear panel, closed.
– 1 x Mounting kit.
How supplied
– In sets.
DOP00275
How supplied
– In sets.
DOP00055
W
U
Order No.
UP
554.4
6
01.240.454.1
1 unit
554.4
9
01.240.457.1
1 unit
554.4
12
01.240.459.1
1 unit
U
Order No.
UP
554.4
15
01.240.460.1
1 unit
6
01.240.490.9
1 set
554.4
18
01.240.461.1
1 unit
554.4
21
01.240.462.1
1 unit
9
01.240.493.9
1 set
12
01.240.495.9
1 set
15
01.240.496.9
1 set
18
01.240.497.9
1 set
21
01.240.498.9
1 set
24
01.240.499.9
1 set
168 | Mechanics – Enclosure
Knürr DoubleProRack®
Knürr DoubleProRack®
Knürr DoubleProRack®
Connection Panel with Brush Strip
Grounding Set for Doors and Trims
– To cover rear panel along with the
corresponding rear panel shortened
by 3 U.
– For DoubleProRack width 554.4 mm.
–With brush strip for cable routing and
strain relief.
DOP00274
–For grounding doors and/or cover plates.
MEC20123
How supplied
– In sets.
Finish / Color
– Powder-coated texture, RAL 7035
light-grey.
Scope of delivery
– 1 x connection plate.
– 1 x Mounting kit.
DOP00288
Scope of delivery
– 5 x grounding connections, length
250 mm.
– 1 x grounding connection, 250 mm,
two-sided AMP plug.
– 5 x spring nuts, M5.
– 5 x cylinder screws, M5 x 10
with tooth-lock washer.
– 5 x washers.
How supplied
– In sets.
DOP00286
W
H
U
Order No.
UP
554.4
132.5
3
01.243.438.1
1 unit
Order No.
UP
01.245.400.9
1 set
Knürr DoubleProRack®
Grounding Set for Enclosures
Grounding Bar
– For grounding top/bottom cover.
– With central grounding bolt.
Scope of delivery
– 2 x g
rounding connections, length
250 mm.
– 4 x spring nuts, M5.
– 2 x washers.
– 4 x cylinder screws, M5 x 10.
– 1 x grounding bolt.
How supplied
– In sets.
MEC20122
–For safe grounding or potential
equalization of equipment and
components.
Material
– Electrolyte copper 9 x 9.
Scope of delivery
– 1 x grounding bar.
– 2 x brackets.
– 1 x Mounting kit.
ELM00068
U
Order No.
UP
12
01.110.703.9
1 unit
21
01.240.545.9
1 unit
DOP20025
Order No.
UP
01.243.400.9
1 set
Contact Clamp
–Enables safe connection of equipment
and components to grounding bar.
– For cables up to 25 mm.
DOP20016
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Scope of delivery
– 120 x contact clamps.
Order No.
UP
01.110.715.9
20 units
Conversion:
U = Standard rack unit
1 U = 44.45 mm
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Mechanics – Enclosure | 169
Knürr DoubleProRack®
Knürr DoubleProRack®
Mounting Bracket
– For mounting socket strips and
cable duct.
DOP00282
Material / Finish
– Zinc-passivated sheet steel.
Scope of delivery
– 2 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Order No.
UP
01.240.533.9
1 set
Knürr DoubleProRack®
Twin Caster 50 mm
–For mobile installation of the
DoubleProRack stand-alone enclosure
with fixed casters.
Material / Finish
– Polyamide, RAL 9011 black.
Load rating
– 400 N per caster.
– 1200 N max. static total load per rack.
Scope of delivery
– 2 x twin casters.
– 2 x fixed casters.
– 4 x lock washers.
How supplied
– In sets.
DOP00267
DOP00233
H
Order No.
UP
50
01.240.527.9
1 set
75
01.240.528.9
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
1 U = 44.45 mm
UP = Packaging unit
170 | Mechanics – Enclosure
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr ConAct®
Knürr ConAct®
Network wall-mounted housing
Features
Economical: savings of up to 50%
on transport volume and storage
space.
Practical: "one-person" installation
as housing is delivered in parts.
The ConAct® network wall-mounted housing is notable due to its simple
and quick "one-person" installation.
The ConAct® wall-mounted housing offers ideal conditions for network
distribution. It is delivered in flat-pack sets.
Installing the ConAct network housing involves: Unpacking – and then
network installation can begin within minutes.
Convenient for laying cables as
it can be accessed from all sides;
generous lateral clearance space.
Individual configuration: various
modification options available
(color, design etc.).
Mechanics – Enclosure | 171
Knürr ConAct®
Economical
– Savings of up to 50 % of transport
volume with flat-pack packaging
(see figure A).
– Easily transported and installed
thanks to space-saving packaging.
– Small packaging allows for
maximized storage space.
A. ACT00024
"One-person" installation
– No unnecessary dismantling of
housing as it is delivered in parts.
– Rear panel mounted using
drill-hole template.
– Easy assembly:
–Keyhole punching on the rear
panel (see figure B).
– Push-in technology for mounting
rails and covers.
– Symmetrical housing
configuration.
B. ACT00031
C. ACT00030
Accessories
– Easy integration of accessories; e.g.
socket strips with screw-on points
on the vertical extrusion or on the
rear panel (see figure E).
– Accessories available for orderly
cable management; e.g. cable
routing board or cable-routing
bracket (see figure F).
– Comprehensive standard range
of accessories available; e.g. shelves,
drawers, socket strips, etc.
Maintenance-friendly
– Easy access for servicing is
guaranteed when removing the
side panels.
– Housing can be locked with security
lock.
– Door opening angle: 180°.
Cabling made easy
– Access from all sides guarantees
convenient mounting of the
components.
– Open construction design permits
easy cable management.
– Organized cable management
with spacious lateral clearance
area and cable clamping rails
(see figures C+D).
D. ACT00033
ACT00017
E. ACT00034
1.
F. ACT00033
ACT00024
Unpack
172 | Mechanics – Enclosure
2.
ACT00004
Mount rear panel
3.
ACT00005
Mount supports and vertical extrusions
Knürr ConAct®
Rear panel
Top cover
prepared for
ventilation unit
Ventilation unit
Grey surfaces = system components
(optional, not included in standard delivery)
Cable clamping rail
Support
Sheet-steel door
Glass door
Design door,
closed
(sheet steel)
Side panel
Design door,
perforated
(sheet steel)
19" vertical extrusion
Bottom cover
ACT00038
Knürr ConAct®
Technical data
19" installation dimensions as per IEC 297-3
–H
eights: 6 U / 9 HE / 12 U / 15 U /
18 U / 21 U / 24 U (1 U = 44.45 mm).
– Widths: 482.6 mm (19").
External dimensions
–H
eights: 352 mm / 486 mm / 619 mm /
752 mm / 886 mm / 1019 mm / 1152 mm.
– Width: 600 mm.
– Depths: 400 mm / 500 mm / 600 mm.
Standards
– Grounding VDE 0100 T 540, EN 60950,
EN 60529.
4.
5.
6.
ACT00006
Install cables and components
ACT00007
Fit covers into place
Configurations
– Stationary, wall mounting.
ACT00008
Installation is now complete.
Mechanics – Enclosure | 173
Knürr ConAct®
Knürr ConAct® Standard 19" Wall-mounted Housing
ACT20053
Description
– F or components compliant with IEC 297-3.
–A
ccessible from all sides; covers can be
removed quickly.
–C
able routing via brush strip on top and
bottom covers.
–V
entilation unit, optional (can easily be
retrofitted).
– F ront door with safety glass, lockable.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x rear panel.
– 4 x mounting rails.
– 2 x 19" sheet-steel vertical extrusions.
– 1 x top cover, prepared for ventilation unit.
– 1 x bottom cover, closed.
– 2 x side panels.
– 1 x glass door.
– 1 x cable clamping rail.
– 1 x Mounting kit.
Jumpering space
–8
0 mm (minimum 32, > 80 in 25 mm
increments).
Load rating
–5
00 N static.
How supplied
– In parts.
Protection rating
– IP 20.
Material / Finish
–R
ear panel and basic frame, sheet steel,
zinc-passivated.
–R
emovable covers, powder-coated sheet steel.
– F ront door, single safety glass panel, textured.
–1
9" vertical extrusions, zinc-passivated sheet
steel.
ACT20041
W
H
D
U
h
d (max.)
kg
Model
Order No.
UP
600
352
400
6
270
235
16
With glass door
05.010.000.1
1 unit
600
486
400
9
404
235
19
With glass door
05.010.001.1
1 unit
600
619
400
12
537
235
22
With glass door
05.010.002.1
1 unit
600
352
500
6
270
335
18
With glass door
05.010.007.1
1 unit
600
486
500
9
404
335
21
With glass door
05.010.008.1
1 unit
600
619
500
12
537
335
24
With glass door
05.010.009.1
1 unit
600
752
500
15
670
335
28
With glass door
05.010.010.1
1 unit
600
886
500
18
804
335
31
With glass door
05.010.011.1
1 unit
600
352
600
6
270
435
20
With glass door
05.010.014.1
1 unit
600
486
600
9
404
435
23
With glass door
05.010.015.1
1 unit
600
619
600
12
537
435
27
With glass door
05.010.016.1
1 unit
600
752
600
15
670
435
30
With glass door
05.010.017.1
1 unit
600
886
600
18
804
435
34
With glass door
05.010.018.1
1 unit
600
1019
600
21
937
435
37
With glass door
05.010.019.1
1 unit
600
1152
600
24
1070
435
41
With glass door
05.010.020.1
1 unit
Dimensions in mm:
174 | Mechanics – Enclosure
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
1 U = 44.45 mm
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Knürr ConAct®
Knürr ConAct®
19" Vertical Extrusion
Knürr ConAct®
Grounding Set
–Install in front and/or rear of housing.
–For grounding all covers
on housing frame.
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated.
ACT00029
Scope of delivery
– 2 x vertical extrusions.
– 1 x Mounting kit.
ACT00026
U
Order No.
UP
6
05.010.321.9
1 set
9
05.010.322.9
1 set
12
05.010.323.9
1 set
15
05.010.324.9
1 set
18
05.010.325.9
1 set
21
05.010.326.9
1 set
24
05.010.327.9
1 set
Knürr ConAct®
UP
05.010.330.9
1 set
–Easy retrofitting of ventilation unit in top
cover.
– With two axial fans.
– With thermostat.
–Available in two performance classes.
Technical data for thermostat
– Setting range: 0 to 60°C.
– Mains supply: 240 V / 50 Hz.
– Nominal current: 16 A.
Color
– RAL 7035, light-grey.
Material / Finish
– Zinc-passivated sheet steel.
Scope of delivery
– 1 x cable clamping rail.
– 1 x Mounting kit.
How supplied
– In sets.
MIR00641
Order No.
UP
05.010.340.9
1 set
Material / Finish
– Zinc-passivated sheet steel.
Technical data for single fan
Type 1:
– Volume flow (free blowing):
162 m3/h per fan.
–N
oise emission (free blowing):
37 dB(A).
Type 2 (quiet):
–V
olume flow (free blowing):
120 m3/h per fan.
–N
oise emission (free blowing): 32 dB(A).
–Cables secured with U-clamps, clamping
bars or hammer-head threaded plate.
– For mounting on rear panel.
ACT00006_A
Ventilation Unit with Thermostat
ACT20056
Order No.
Knürr ConAct®
Cable Clamping Rail
ACT00035
ACT20058
Scope of delivery
– 5 x grounding conductors, 6 mm2.
– 1 x Mounting kit.
ACT20059
Scope of delivery
– 1 x v entilation unit ready for
connection.
– 1 x Wired with thermostat.
How supplied
– Assembled, wired and tested.
Model
Order No.
UP
Type 1
05.010.306.1
1 set
Type 2 (quiet)
05.010.307.1
1 set
Mechanics – Enclosure | 175
SmartAisle™
SmartAisle™
The Comprehensive Solution for Data Centers
Features
Outstanding fail-safe design.
Ideal temperature for IT
equipment; no hot spots.
Minimal energy consumption.
Easy to plan a new data center.
Comprehensive Solution
Racks.
Rack PDUs.
Power distribution.
UPS.
The most important trend in IT is the increasing independence of
applications from the IT infrastructure. Virtualization and cloud computing
are the current buzzwords. Hardware is based on energy-efficient IT
components and the dynamic control of these components to meet the
applications' current requirements.
Emerson Network Power's SmartAisle™ is the SmartAisle™ solution encompasses the space, power supply and cooling for servers, storage and the network
in the data center. Data centers are highly individual and are constantly subject
to change. The physical infrastructure can be adapted to meet any conceivable
need by selecting comprehensive portfolio components that harmonize with
one another.
The SmartAisle™ solution is future-proof and delivers outstanding availability
and efficiency.
iCOM-controlled cooling.
Containment.
Cable management.
Rack and aisle monitoring.
Data center infrastructure.
DCIM Management.
Commissioning and maintenance.
Other services.
COLD AISLE
CONTAINMENT
COOLING
Liebert® HPM,
HPC, CRV
All have interfaces at a top-level
infrastructure management system
(Trellis™), which facilitates holistic
monitoring, management and
automation of the physical
infrastructure.
RACK
PLATFORM
Knürr DCM®,
Knürr Miracel®
POWER SUPPLY
MONITORING
DCIM, Liebert iCom,
Avocent DS View3
176 | SmartAisle™ – Containment
Liebert APM,
Rack PDUs,
Knürr PowerTrans®
SmartAisle™
SmartAisle™ containment – consistent separation of warm and cold air
is the cornerstone of an energy-efficient data center.
SmartAisle™ – Containment | 177
SmartAisle™
SmartAisle™
The Comprehensive Solution Concept for Data Centers
Emerson Network Power Control System
Due to rising power costs and increased environmental awareness,
the main objective for most operators is to maximize the energy
efficiency of their data centers.
Many have already implemented basic
separation of cold air from warm air
with blanking panels, bushings for
cable entry, cold aisle containment,
etc. Air-cooling units are key to
energy-efficient data centers and
further optimization is achieved by
adjusting the fans' speed. The
operator reduces electricity costs
significantly by choosing the right
type of control system, which in turn
increases availability. In the event of
one recirculated air cooling device
malfunctioning, temperature control
The SmartAisle™ Control-System Principle
178 | SmartAisle™ – Containment
is maintained by increasing the speed
of the remaining devices. The two
most common control principles are
pressure control and control via the
cold aisle temperature.
With the SmartAisle™ control
principle, the cold aisle temperature,
i.e. the temperature of the air supply
to the servers is used to control the
fans in the room's climate control
equipment (see diagram). This control
principle is patented.
SmartAisle™
SmartAisle™ – Containment | 179
SmartAisle™
SmartAisle™
The Comprehensive Solution Concept for Data Centers
Overview of SmartAisle™ Containment
STANDARD
Standard program:
Aisle width 1200 / 1500 and 1800 mm.
Rack height 2000 and 2200 mm.
Features:
Ideal for new data centers and for retrofitting homogeneous rack aisles.
Industrial prefabrication makes for a highly economic solution.
Quick and easy on-site installation.
SWITCH TUBES
FREE-STANDING
CUSTOMIZED
Features:
Precision fit to racks and rows.
180 | SmartAisle™ – Containment
Suitable for retrofitting heterogeneous data centers.
Compatible with standard SmartAisle™.
Features:
Flexible adjustment to racks with non-standard dimensions.
For racks and applications that are exchanged at intervals.
Compatible with standard SmartAisle™.
Features:
No hot spots.
Suitable airflow routing.
Utilized in energy-efficient data centers.
SmartAisle™
Standard SmartAisle™ Containment
Emerson Network Power Containment Solution
Standard program
Aisle width: 1200 / 1500 and
1800 mm.
Rack height: 2000 and 2200 mm.
The standard SmartAisle™ product range consists of flexible, adaptable
and user-friendly components.
The individual components equalize the tolerances of the racks, which are not
usually installed with millimeter precision. The system is compatible with most
commercially available racks.
The standard top covers have been prepared for the patented SmartAisle™
control system.
Features
Ideal for new data centers and
for retrofitting homogeneous rack
aisles.
Different door systems are available, including hinged and sliding doors. Hinged
or swing doors offer advantages in terms of safety and emergency exits, while
sliding doors take up less space.
Industrial prefabrication makes
for a highly economic solution.
Quick and easy on-site
installation.
The containment can be used for
Emerson racks as well as for the
most common racks in the market.
The racks do not need to be
installed in pairs.
The top panels are transparent so
that the available room lighting
can be used.
SmartAisle™ – Containment | 181
SmartAisle™
Standard SmartAisle™
Containment
Configuration assistant
Top cover plate
Protective brackets
Separator strip for aisle fire extinguishers
End separator strip
SensorBOX
(in air-control opening)
Double door,
sliding door or
front panel element
Rack
CAC20000
182 | SmartAisle™ – Containment
Required data per cold aisle
Example
– Aisle width (standard dimensions 1200, 1500 and 1800 mm ± 50 mm)
Aisle width (AW) = 1200 mm
– Rack height (standard dimensions 2000 and 2200 mm)
Rack height (H) = 2000 mm
– Aisle length
Aisle length (L) = 4800 mm
– Rack type
Knürr DCM® B800
– Color (light-grey RAL 7035 or dark-grey RAL 7021)
Dark-grey RAL 7021
Options
Example
Item
– Front door component (sliding door, double door, front panel)
Sliding door
03.029.026.8
1 unit
– Front door c closer (mechanical, electric)
Electric door closer
03.029.046.8
1 unit
1 unit
– Rear door component (sliding door, double door, front panel)
Double door
03.029.021.8
– Rear door closer (mechanical, electric)
Mechanical door closer
(integrated in double door)
– Top cover plate
Top cover plate L2400
03.029.129.8
2 sets
– End separator strip
End separator strip GB 1200
03.029.010.8
1 pair
– SensorBOX
Yes
03.029.132.8
2 units
– Protective brackets
Yes
03.029.041.8
6 sets
– DCM® adjustment shim
Yes
03.029.137.8
3 sets
– Filler panel
No
– Height trims
No
– Sealing set
Yes
03.029.040.9
2 sets
– Raised-floor air barrier for cable entry
Yes (per rack)
03.029.211.9
22 units
– Open mesh flooring plate
Yes
03.029.090.8
28 units
SmartAisle™
SmartAisle™ Sliding-door
Prepared for Automatic Door Closers
Description
– Used in cold aisle containment for aisle widths:
1200 / 1500 / 1800 mm (± 50 mm).
–Q
uick and easy mounting.
– S uitable for Miracel® and DCM® racks and
most other brands.
Clear door opening
– Width: at least 950 mm.
– Height: 2080 mm.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey (e. g.
X=1; 03.029.026.X=03.29026.1=light-grey).
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey (e. g.
X=8; 03.029.026.X=03.29026.8=dark-grey).
Scope of delivery
Material
– Door components: sheet steel.
–O
bservation window: single safety-glass
panel.
– Brush strips: polyamide (UL94 HF-1).
– 1 x frame.
– 2 x doors.
– 2 x floor guides.
– 1 x Covers.
– 1 x Sealing material.
– 1 x Mounting kit.
How supplied
– In sets.
CAC20001
Note
Please order the requisite closers
(electric or mechanical).
H
AW
Order No.
UP
2000
1200
03.029.026.X
1 set
2200
1200
03.029.027.X
1 set
2000
1500
03.029.061.X
1 set
2200
1500
03.029.062.X
1 set
2000
1800
03.029.066.X
1 set
2200
1800
03.029.067.X
1 set
Electric Sliding-door Closer
CAC20004
Description
– Compatible with SmartAisle™ sliding door.
– I ncreases energy efficiency
as doors closes automatically.
–O
pens with "push & go".
–C
loses with "push & go" or
automatically (0 to 30 seconds).
–O
pener/closer contact for control
(e.g. fire alarm system).
Material
– S heet steel.
Scope of delivery
– 1 x electric drive.
– 1 x cover.
– 1 x Mounting brackets.
– 1 x Mounting kit.
Technical data
– Power supply: 230 V / 50 - 60 Hz.
– Opening speed: 0.4 m/s.
– Closing speed: 0.2 m/s.
– Automatic closing time, adjustable: 0 to 30 s.
– Force: 30 N.
CAC20005
Finish
– F inal digit of order number .1:
powder-coated, RAL 7035 light-grey.
– F inal digit of order number .8:
powder-coated, RAL 7021 dark-grey.
How supplied
– Single items.
Dimensions in mm:
W = Width
H = Height
D = Depth
L = Length
AW = Aisle width
Order No.
UP
03.029.046.X
1 set
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
SmartAisle™ – Containment | 183
SmartAisle™
Mechanical Sliding-door Closer
CAC20006
CAC20007
S
cope of delivery
– 2 x sets of gas pressure springs.
– 1 x cover.
– 1 x Mounting brackets.
– 1 x Mounting kit.
Description
– S uitable for SmartAisle™ sliding door.
– I ncreases energy efficiency as doors open
and close automatically.
– S top function when open.
Material
– S heet steel.
Technical data
– Force: 20 N.
Finish
– F inal digit of order number .1:
powder-coated, RAL 7035 light-grey (e. g.
X=1; 03.029.026.X=03.29026.1=light-grey).
– F inal digit of order number .8:
powder-coated, RAL 7021 dark-grey (e. g.
X=8; 03.029.026.X=03.29026.8=dark-grey).
How supplied
– Single items.
Order No.
UP
03.029.047.X
1 set
SmartAisle™ Sliding-door
with Access Check
CAC20002
Description
– Used in cold aisle containment for aisle widths:
1200 / 1500 / 1800 mm (± 50 mm).
–Q
uick and easy mounting.
– S uitable for Miracel® and DCM® racks and
most other brands.
– Magnets ensure safe closing; in the event
of a power failure, the door can easily be
opened manually.
– S tandard access check with keypad
(other systems also available).
– I nside switch for routine exit.
–V
dS-compliant emergency switch inside;
height of switch < 1 meter.
–V
dS-compliant emergency switch outside
for rescue purposes.
–D
oor contact switch for monitoring
"door open" – "door closed".
Clear door opening
–W
idth: at least 950 mm.
–H
eight: 2080 mm.
Material
– Door components: sheet steel.
– Observation window:
single safety-glass panel.
– Brush strips: polyamide (UL94 HF-1).
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x frame.
– 2 x doors.
– 2 x floor guides.
– 1 x rack monitoring system.
– 1 x Electrical closing system.
– 1 x Covers.
– 1 x Sealing material.
– 1 x Mounting kit.
How supplied
– In sets.
H
AW
Order No.
UP
2000
1200
03.029.029.X
1 set
2200
1200
03.029.029.X
1 set
CAC20003
Dimensions in mm:
W = Width
H = Height
D = Depth
184 | SmartAisle™ – Containment
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
SmartAisle™
SmartAisle™ Double Door
with Automatic Door Closer
Description
– Used in cold aisle containment for aisle widths:
1200 / 1500 / 1800 mm (± 50 mm).
–Q
uick and easy mounting.
– S uitable for Miracel® and DCM® racks and
most other brands.
– Integrated automatic/mechanical door closer
(opening angle 180°, stop angle approx. 120°;
door closes automatically from approx. 100°).
Clear door opening
–W
idth: 1200 mm.
–H
eight: 2100 mm (for rack height 2000 mm);
2300 (for rack height 2200).
CAC20008
Material
–D
oor frame: aluminum.
–D
oor components: sheet steel.
–O
bservation window: single safety-glass
panel.
–B
rush strips: polyamide (UL94 HF-1).
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
S
cope of delivery
– 1 x door frame.
– 2 x doors.
– 3 x design covers.
– 2 x door closers.
– 1 x Mounting kit.
How supplied
– In sets.
H
AW
Order No.
UP
2000
1200
03.028.021.X
1 set
2200
1200
03.028.022.X
1 set
2000
1500
03.028.041.X
1 set
2200
1500
03.028.042.X
1 set
2000
1800
03.028.046.X
1 set
2200
1800
03.028.047.X
1 set
SmartAisle™ Front Panel
Description
– Used in cold aisle containment for aisle widths:
1200 / 1500 / 1800 mm (± 50 mm).
–A
lternative to cold aisle door.
–Q
uick and easy mounting.
– S uitable for Miracel® and DCM® racks and
most other makes.
CAC20009
Material
– Sheet steel.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x bracing bracket.
– 2 to 4 panels.
– 1 x Mounting kit.
How supplied
– In sets.
H
AW
Order No.
UP
2000
1200
03.029.031.X
1 set
2200
1200
03.029.032.X
1 set
2000
1500
03.029.034.X
1 set
2200
1500
03.029.035.X
1 set
2000
1800
03.029.037.X
1 set
2200
1800
03.029.038.X
1 set
SmartAisle™ – Containment | 185
SmartAisle™
SmartAisle™ Top Cover Plate
CAC20010
Description
– Used in cold aisle containment for aisle widths:
1200 / 1500 / 1800 mm (± 50 mm).
–Q
uick and easy mounting.
– S uitable for Miracel® and DCM® racks and
most other brands.
– With rubber sleeves for cable routing.
– Top cover plate with low fire load and smoke
generation (optionally with compound safety
glass).
– Top cover plate(s) can be removed quickly
and easily.
– E quipped with SensorBOX for energy-efficient
operation of the recirculated air cooling
devices and for preventing hot spots.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Clear aisle height
–R
ack height 2000 mm: 2150 mm.
–R
ack height 2200 mm: 2350 mm.
How supplied
– In sets.
Material
–A
ngular extrusion, cross brace: sheet steel.
–T
op cover plate: polycarbonate,
UL94 V-0/DIN 4102 B1.
186 | SmartAisle™ – Containment
Scope of delivery
– 2 x angular extrusions with air regulation
opening.
– 1 x separator strip for W 300/600/800,
3 x separator strips for L 2400.
– 1 x top cover plate for W 300/600/800,
3 x top cover plates for L 2400.
– 2 x angular extrusion plates.
– 1 x Mounting kit.
Important Note
When using Knürr DCM® racks, please also order
corresponding adjustment plates.
Note
Please also order correct number of SensorBOXes for the recirculated air cooling devices'
control system.
W/L
AW
Order No.
UP
300
1200
03.029.120.X
1 set
600
1200
03.029.123.X
1 set
800
1200
03.029.126.X
1 set
2400
1200
03.029.129.X
1 set
300
1500
03.029.121.X
1 set
600
1500
03.029.124.X
1 set
800
1500
03.029.127.X
1 set
2400
1500
03.029.130.X
1 set
300
1800
03.029.122.X
1 set
600
1800
03.029.125.X
1 set
800
1800
03.029.128.X
1 set
2400
1800
03.029.131.X
1 set
SmartAisle™
SmartAisle™ End Separator Strip
Description
– Used in cold aisle containment for aisle widths:
1200 / 1500 / 1800 mm (± 50 mm).
–Q
uick and easy mounting.
– F or connecting the door component or front
panel.
CAC20011
Material
– S heet steel.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 2 x end separator strips.
– 1 x Mounting kit.
How supplied
– Single items.
AW
Order No.
UP
1200
03.029.010.X
1 pair
1500
03.029.011.X
1 pair
1800
03.029.012.X
1 pair
SmartAisle™ Separator Strip
for Aisle Fire Extinguisher for SmartAisle™ Top Cover Plate
CAC20012
Description
– F or gas extinguisher in cold aisle.
–R
ubber sleeve for covering piping, and/or the
nozzles in the cold aisle.
– S crew fitting for securing the piping to the
cold-aisle containment.
– E quipped with SensorBOX for energy-efficient
operation of the recirculated air cooling
devices as well as to prevent hot spots.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Material
– S heet steel.
How supplied
– In sets.
Scope of delivery
– 1 x separator strip for aisle fire extinguisher.
– 1 x Mounting kit.
W/L
AW
Order No.
UP
200
1200
03.029.115.X
1 set
200
1500
03.029.116.X
1 set
200
1800
03.029.117.X
1 set
Dimensions in mm:
W = Width
H = Height
D = Depth
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
SmartAisle™ – Containment | 187
SmartAisle™
SmartAisle™ DCM® Adjustment Shim
used with Knürr DCM® Racks
Description
– S pacer between DCM® rack and
cold aisle containment.
CAC20013
Material
– S heet steel.
Scope of delivery
– 1 x adjustment shim.
How supplied
– In sets.
Finish
– F inal digit of order number .1:
powder-coated, RAL 7035 light-grey.
– F inal digit of order number .8:
powder-coated, RAL 7021 dark-grey.
CAC20014
W/L
For rack type
Order No.
UP
300
DCM®
03.029.134.X
1 set
600
DCM®
03.029.135.X
1 set
800
DCM®
03.029.137.X
1 set
1000
DCM®
03.029.139.X
1 set
CAC20015
SmartAisle™ SensorBOX
for SmartAisle™ Top Cover Plates
CAC20016
Description
– S uitable for air regulation opening of the top
cover plates.
–A
s per patented control-system principle
designed for energy-efficient operation of the
cooling system.
–P
repared for Liebert® temperature sensor.
– Compatible with a variety of sensors.
Material
– S heet steel.
CAC20017
188 | SmartAisle™ – Containment
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x SensorBOX.
– 1 x Mounting kit.
How supplied
– In sets.
Order No.
UP
03.029.132.X
1 set
SmartAisle™
SmartAisle™ Filler Panel
Description
– F or sealing off the compartments without
racks in the suite.
–Q
uick and easy mounting.
–V
ariable height; can be used for total rack
heights of 1990 to 2220 mm.
– S everal filler panels can be set up in a row.
Scope of delivery
– 1 x filler panel (two parts).
– 1 x Mounting kit.
How supplied
– In sets.
Material
– S heet steel.
CAC20018
Finish
– F inal digit of order number .1:
powder-coated, RAL 7035 light-grey.
– F inal digit of order number .8:
powder-coated, RAL 7021 dark-grey.
W/L
H
Order No.
UP
300
2000 / 2200
03.029.055.X
1 set
600
2000 / 2200
03.029.056.X
1 set
800
2000 / 2200
03.029.058.X
1 set
CAC20019
Dimensions in mm:
W = Width
H = Height
D = Depth
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
SmartAisle™ – Containment | 189
SmartAisle™
SmartAisle™
Height Trim
SmartAisle™ Sealing Set
for 4.8 meter Aisle Length
–For adjusting the separation of the
cold and hot areas in smaller racks.
DCM20057
Material
– Sheet steel.
–Suitable for installation in Miracel® rack.
–For sealing the leveling area between
the floor and the rack.
–For sealing Miracel® rack suites without
side panels.
LUF20336
Finish
– Final digit of order number .1:
powder-­coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-­coated, RAL 7021 dark-grey.
Material / Color
– Foam element: PUR ether UL94 HF-1,
black.
– Cover extrusion: PVC extruder
extrusion, black.
LUF20328
Scope of delivery
– 1 x height trim.
– 1 x Mounting kit.
Scope of delivery
– 10 meters of foam 40 x 25 mm.
– 31 meters cover extrusion.
How supplied
– In sets.
How supplied
– In sets.
Note
Where there are several adjacent height
panels, please request the corresponding
angular extrusion plates.
W
H
For rack type
Order No.
UP
300
221
DCM®
03.029.140.X
1 set
600
221
DCM®
03.029.141.X
1 set
600
200
Miracel®
03.029.051.X
1 set
800
221
DCM®
03.029.143.X
1 set
800
200
Miracel®
03.029.052.X
1 set
1000
221
DCM®
03.029.145.X
1 set
W
For rack type
Order No.
UP
4800
Miracel®
03.029.040.9
1 set
SmartAisle™ Sealing Set
for 4.8 meter Aisle Length
–Suitable for sealing gaps (e. g. in the
leveling area between floor and rack,
between racks, etc.).
DCM20047
SmartAisle™ Protective
Brackets for Top Cover Plate
DCM20131
–Prevents Plexiglas panels from lifting up
when there is excess pressure.
–Enables safe pressure equalization in the
event of a malfunction or while a fire is
being extinguished.
Material
– Sheet steel.
Finish
– Final digit of order number .1:
powder-­coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-­coated, RAL 7021 dark-grey.
LUF20383
Scope of delivery
– 1 x pair of protective brackets.
– 1 x Mounting kit.
How supplied
– In sets.
190 | SmartAisle™ – Containment
Order No.
UP
03.029.041.X
1 set
Material / Color
– PUR ether (UL94 HF-1), black.
Scope of delivery
– 5 x 2 meters of foam.
How supplied
– In sets.
Size
Order No.
UP
40 x 40 (adhesive surface) mm
03.029.042.9
1 set
20 x 20 (adhesive surface) mm
03.029.043.9
1 set
5 x 10 (adhesive surface) mm
03.029.044.9
1 set
25 x 40 (adhesive surface) mm
03.029.045.9
1 set
SmartAisle™
SmartAisle™ Raised Floor
Air Barrier for Cable Entry
SmartAisle™ Open Mesh
Flooring Plate for Raised Floors
DSC00318
– Used in raised floors.
–Can be used with high heat loads and
high cooling-air requirements per rack.
–For energy-efficient operation of the
recirculated air cooling devices.
– Stiffener distance 33 x 16 mm.
–For cable entry from the raised floor.
–Lowered into raised floor, or can be
mounted on top.
–Two-row tight brushes for pressureresistant cold-hot separation.
–For new cutouts and as add-on to existing
cutouts.
–Two-piece – easy extend and retrofit
option.
–The length can easily be shortened
on-site (metal saw).
–Also suitable for cabling on the rack
wall (U-shape, two pieces).
–Slot-in – and additional threaded
connection.
LUF20334
Material
– Steel, zinc-passivated.
Finish
– Final digit of order number .1:
powder-­coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-­coated, RAL 7021 dark-grey.
Standards
Produced as per RAL-GZ 638.
–Load capacity as per DIN EN 12825
– On supports: class 1A, deflection under
instantaneous working load (2 kN) and
2C (3kN); measured at the center of
plate.
– On supports and control-room profiles:
deflection under instantaneous working
load 2A (3kN).
Scope of delivery
– 1 x open mesh flooring plate for raised
floor.
Technical data
– Size 598 x 598 x 40 mm (W x L x H).
– Free cross-section: 77 %.
– Max. surface load 50,000 N/m2 with
even distribution; –M
ax. point load (on surface
200 x 200 mm) 4,500 N.
Dimensions
03.028.211.9:
– External dimension (270 mm x 220 mm).
– Usable cable entry (200 mm x 126 mm).
– Raised floor cutout (240 mm x 180 mm).
03.028.212.9:
– External dimension (600 mm x 220 mm).
– Usable cable entry (530 mm x 126 mm).
– Raised floor cutout (570 mm x 180 mm).
LUF20301
Scope of delivery
– 1 x pair of raised floor air barriers.
– 1 x Mounting kit.
How supplied
– In sets.
LUF20302
W
H
for type
Order No.
UP
270
220
Length, 270 mm
03.028.211.9
1 set
600
220
Length, 600 mm
03.028.212.9
1 set
How supplied
– Single items.
Note
Suitable for raised floors with 40 mm
panel heights.
Order No.
UP
03.029.090.X
1 unit
Dimensions in mm:
W = Width
H = Height
D = Depth
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
SmartAisle™ – Containment | 191
SmartAisle™
Customized SmartAisle™ Containment
Customized – Retrofitting Solution from Emerson Network Power
Data center structures are often the result of ongoing changes and
modifications spanning a number of years.
Features
Precision fit on racks
and rack rows.
Suitable for retrofitting
heterogeneous data centers.
Combined with
standard SmartAisle™.
The racks have different dimensions and they are not always positioned in a line.
Knürr offers this solution based on a profile construction that can be made on
site to correspond to the precise dimensions of a given data center.
With the customized solution, the dimensions are measured on site and the
profiles and panels for the containment are cut and assembled to meet precise
requirements. The panels are normally cut outside the data center in a
designated area.
If possible, the customized elements are combined with standard components.
As a rule, standard sliding or hinged doors are used. The standard top cover
plate is generally used, thus, customized elements are only used to fill the gaps
between the racks.
On t
es
requ
192 | SmartAisle™ – Containment
SmartAisle™
Free-Standing SmartAisle™ Containment
Free-Standing – Emerson Network Power's Special Solution
Free-Standing System
Features
Can be flexibly adjusted to racks
with non-standard dimensions.
For racks and applications that
are exchanged at intervals.
Combined with
standard SmartAisle™.
In many data centers, so-called "free-standing systems" are installed in addition
to the server racks. These often non-standard racks are regularly exchanged at
defined intervals (usually one to three years).
Free-standing systems may include storage cabinets, cluster applications
(e.g. IBM, SUN) or server racks (e.g. IBM, HP, SUN, etc.). There are a number
of reasons for delivering a complete package including the racks. For storage
applications, one of the main reasons is product liability. Cluster applications
are usually leased and with server applications, the reasons are often marketing-related.
The challenge facing the SmartAisle™ for free-standing systems is to construct
a flexible cold aisle containment, allowing a modular and fast exchange of these
free-standing systems.
The free-standing cold aisle containment solution is based on standard
SmartAisle™ products and used in combination with these. The panels for
the free-standing solution can be customized in both dimensions (height and
width) according to the rack dimensions.
On t
es
requ
SmartAisle™ – Containment | 193
SmartAisle™
SmartAisle™ Containment SwitchTubes
Switch Tubes – Switch Cooling from Emerson Network Power
Cooling switches
Switches have special requirements.
Cooling/ventilation
–M
ostly lateral air flow (from right
to left, from left to right, from left
and right toward the rear, including many other directions)
 switches draw in warm air.
– Power requirements for cooling
are often high (up to over 10 kW
per switch).
Max. permitted input air
temperature
–M
ax. permitted input air temperature is approx. 37° to 40°C.
 Probably higher inlet temperatures in efficient cold/warm
separation environment.
 High energy consumption
for cooling.
Cabling
– L arge cable volumes.
– Fan units free from cabling;
repair work can be performed
during operation.
– Air flow should have be free of
cables.
For cooling purposes, servers draw in cold air from the front and blow heated air
out at the rear. By contrast, switches mainly draw the cold air in from the side
and blow air out either laterally or at the rear. Since cooling problems arise in
racks equipped with consistent hot/cold separation, Special airflow systems are
required for switch applications to ensure reliability and energy efficiency.
The SmartAisle™ switch tube is a flexible and safe add-on to the complete
SmartAisle program. Various standard products are available for the
respective switch types.
SwitchTubes – controlled switch cooling
Servers are usually cooled from the front to the rear, in line with modern
and energy-efficient data center requirements. However, cooling
direction for switches most often occurs from the side. In this application,
the switches draw the cooling air out of the warm area.
The SwitchTube provides air for the switch from the cold aisle, where heated air
is directed into the warm aisle.
Mechanics
–V
arious heights (1 U to approx.
24 U).
– Various depths, where air can be
drawn in from different areas.
Emerson Network Power offers a
large range of switch tubes for the
most common switch types.
Features
– No hot spots.
– S uitable airflow routing.
– Utilized in energy-efficient
data center.
Air flow in switch rack for switches
equipped with lateral cooling.
194 | SmartAisle™ – Containment
SmartAisle™
SmartAisle™ 19" SwitchTube
LUF20360
LUF20379
03.029.217.X
03.029.217.X
Description
– For cooling a core switch from the cold aisle.
–C
an be used with or without a raised floor.
–P
rovides energy-efficient cooling for laterally
cooled switches.
–C
ooling air drawn in from cold aisle (ideally
with containment).
– S uitable for both Knürr Miracel® and DCM®
racks; width of rack 800 mm.
– S pace requirement: 3 or 6 U of the 19"
installation space.
– S uitable for a number of switch heights.
– I nstallation height of switches in rack can be
adjusted.
–P
erforated front panel to the air intake units
prevents the exhaust of paper, etc. in the tube.
–N
ote: cold/warm separation in rack is
required.
Material
–T
ube: sheet steel.
–H
igh-density foam: PUR ether foam
(UL94 HF-1).
Scope of delivery
– 2 x air intake units incl. perforated front panel
(for 12 – 21 U models)
– 1 x air intake unit incl. perforated front panel
(for 7 – 12 U / 4 – 6 U models).
– 1 x adjustable depth lateral air duct.
– 1 x High-density foam.
– 1 x Mounting kit.
How supplied
– In sets.
Important Note
Suitable for cooling max. 2-7 kW thermal load
(at ∆T = 13 K) per switch tube (see table on the
next page).
Important Note
With many switches, part of the front air-intake
perforation is covered (as these are generally
located near the front, directly behind the front
19" extrusion).
Important Note
May not be suitable for switches with different
cooling directions.
Finish
– F inal digit of order number .1:
powder-coated, RAL 7035 light-grey.
– F inal digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Note
Retrofitting may not be applied due to cables
and other accessories.
WRack
Application
For rack type
Order No.
UP
800
Core switch 12 - 21 U
Miracel®, DCM®
03.029.217.X
1 set
800
Core switch 12 - 21 U
Miracel®, DCM®
03.029.218.X
1 set
800
Core switch 7 - 12 U
Miracel®, DCM®
03.029.213.X
1 set
800
Core switch 7 - 12 U
Miracel®, DCM®
03.029.215.X
1 set
800
Core switch 4 - 6 U
Miracel®, DCM®
03.029.214.X
1 set
800
Core switch 7-12U
Miracel®, DCM®
03.029.219.X
1 set
LUF20358
03.029.213.X
LUF20377
03.029.215.X
LUF20359
LUF20375
03.029.213.X
LUF20378
03.029.215.X
LUF2037603.029.214.X
03.029.214.X
SmartAisle™ – Containment | 195
SmartAisle™
LUF20354
03.029.218.X
LUF20380
Item number
Switch height
[U]
Max. cooling
Max. air-intake area
depth in mm
(Distance to 19" level)
Compatible with
03.029.217.X
12-21
approx. 7 kW (ΔT = 13 K)
per switch tube
460
CISCO Catalyst 6506(-E),
6509(-E), 6513, MDS 9509 Director
03.029.218.X
12-21
approx. 7 kW (ΔT = 13 K)
per switch tube
600
Cisco Nexus 7009
03.029.213.X
7-12
approx. 2 kW (ΔT = 13 K)
per switch tube
320
CISCO Catalyst 4503(-E), 4506(-E),
4507R(-E), 4510R(-E)
03.029.215.X
7-12
approx. 4 kW (ΔT = 13 K)
per switch tube
600
Cisco Nexus 7004
03.029.214.X
4-6
approx. 4 kW (ΔT = 13 K)
per switch tube
550
CISCO Catalyst 6503(-E), 6504(-E)
03.029.219.X
7-12
approx. 4 kW (ΔT = 13K)
per switch tube
460
Cisco Catalyst 6807-XL,
Enterasys S4
Dimensions in mm:
W = Width
H = Height
D = Depth
Air-intake area
03.029.218.X
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
196 | SmartAisle™ – Containment
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
SmartAisle™
Chassis Runner Tube T740
LUF20364
Description
– F or supporting switches during installation
in rack.
– S upports weight of switches during
installation and fitting in rack.
–C
an be used with SmartAisle™ 19" switch
tubes 12 - 21 U.
– S uitable for insertion depth of 740 mm.
– S uitable for all 19" extrusions.
– S uitable for CISCO Catalyst 6506(-E),
MDS 9509 Director.
W
U
DRack
130
3
from 900 740
Material / Finish
– Sheet steel, 2.0 mm, zinc passivated.
Scope of delivery
– 2 x chassis runners.
– 1 x Mounting kit.
How supplied
– In pairs.
For insertion depth
Order No.
UP
03.029.230.7
1 pair
LUF20365
LUF20366
SmartAisle™ SwitchTube Back-to-front
for Switches with back-to-front Cooling
LUF20372
Description
– F or 1 U switches with back-to-front cooling.
– E xtractable – can be used for different switch
depths.
– S uitable for various insertion depths.
–C
ompatible with both Miracel® and DCM®
racks.
– S uitable for Enterasys SSA 180.
Material
–T
ube: sheet steel.
–H
igh-density foam: PUR ether foam
(UL94 HF-1).
LUF20373
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
S
cope of delivery
– 1 x air intake unit.
– 2 x rear support brackets.
– 1 x High-density foam.
– 1 x Edge protector.
– 1 x Mounting kit.
How supplied
– In sets.
W
H
U
For insertion depth
Model
Order No.
UP
450
87.5
2
600–750
for Switches with 1U height
03.029.212.X
1 unit
450
132
3
600–750
for Switches with 2U height
03.029.207.X
1 unit
LUF20374
SmartAisle™ – Containment | 197
SmartAisle™
SmartAisle™ 19" SwitchTube
for Switch Heights 1 U /2 U /3 U
LUF20356
LUF20368
03.029.210.X
03.029.210.X
Description
– F or 1 U, 2 U or 3 U switches with lateral
cooling.
–C
an be used in racks with front-to-back
cooling.
– E xtractable – can be used for different switch
depths.
– F ront or rear installation possible.
– S uitable for different cooling directions (from
left to right, from right to left or from right
and left toward the rear).
– S uitable for insertion depth of 740 mm.
–C
ompatible with both Miracel® and DCM®
server extrusions.
– S uitable for rack widths of 600, 700, 800
and 1000.
– S uitable for CISCO Catalyst 3750,
Juniper EX3200, Juniper EX4200.
Material
–T
ube: sheet steel.
–H
igh-density foam: PUR ether foam
(UL94 HF-1).
LUF20369
03.029.210.X
LUF20357
03.029.211.X
LUF20370
03.029.211.X
LUF20371
03.029.211.X
198 | SmartAisle™ – Containment
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x air intake unit.
– 2 x lateral air ducts.
– 1 x side cover.
– 1 x High-density foam.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Retrofitting may not be applied due to cables
and other accessories.
W
H
U
For insertion depth
Model
Order No.
UP
440
88.1
2
740
for 1 U switch
03.029.210.X
1 unit
440
132.5
3
740
for 2 U switch
03.029.211.X
1 unit
440
177
4
740
for 3 U switch
03.029.208.X
1 unit
SmartAisle™
SmartAisle™ SwitchRack
for Cisco Nexus 7018
Description
– F or installing a CISCO Nexus 7018 at a height
of 7 U to 31 U.
–B
ased on DCM® rack.
– Rack width 1000 mm as per CISCO
requirements for adequate cooling air.
–P
revents hot-spots (air recirculation).
–2
00 mm clearance space for orderly cabling.
– I ncludes cold/warm plates for reliable and
energy-efficient operation.
–C
old air drawn in from cold aisle.
M
aterial / Finish
–B
asic rack, extruded aluminum, polished.
–C
orner piece, die-cast aluminum, polished.
–D
oors, sheet steel, powder-coated texture.
–C
overs, zinc-passivated sheet steel,
powder-coated texture.
–P
UR ether foam (UL94 HF-1).
LUF20362
Color
– F inal digit of order number .1: visible surface
of covers RAL 7035 light-grey.
– F inal digit of order number .8: visible surfaces
of the covers RAL 7021 dark-grey.
Scope of delivery
– 1 x basic frame.
– 4 x 19" server extrusions, sheet steel
incl. U marking.
– 2 x side panels with quick connectors.
– 1 x top cover with cable entry (three-piece
sliding plates can also be opened completely).
– 1 x front door, double, perforated, with
handle and mounting for cylinder lock.
– 1 x rear door, double, perforated, sheet steel,
with handle and mounting for cylinder lock.
– 1 x complete air separation unit (left plate
with 3 x 2 U 19" cutouts, right plate with air
duct).
– 4 x leveling feet.
– 1 x complete grounding set (VDE 0100).
How supplied
– Mounted.
Note
Also order mounting adapter for 19" server
extrusion to mount Knürr accessories
(01.147.640.9).
W
H
D
U
Recess depth
Insertion depth Model
Order No.
UP
1000
2000
1200
42
200
740
03.029.222.X
1 unit
DCM®
LUF20363
Dimensions in mm:
W = Width
H = Height
D = Depth
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
SmartAisle™ – Containment | 199
SmartAisle™
SmartAisle™ Raised Floor SwitchTube
Description
– For cooling a core switch from the raised floor.
–P
rovides energy-efficient cooling
for laterally cooled switches.
–C
old air drawn in from raised floor.
–C
ompatible with Knürr Miracel® rack: width
800 mm (NOT for DCM® rack).
– Suitable for different switch heights.
– Installation height of switches in rack can be
adjusted; tool-less blanking plates for covering
areas outside of switches.
– Air-duct area: 420 cm2.
– S ize of cutouts in raised floor (min./max.):
355/410 x 127/162 mm.
–N
ote: Cold/warm separation in rack is
required.
–N
ote: for max. switch air-intake depth from
460 mm (distance to 19" level).
– SUITABLE FOR CISCO CATALYST 6509(-E),
CATALYST 6513, CATALYST 6506(-E),
MDS 9509 DIRECTOR, HP PROCURVE 8212.
LUF20355
Material
–T
ube: sheet steel.
–H
igh-density foam: PUR ether foam
(UL94 HF-1).
S
cope of delivery
– 1 x air duct with blanking plates (1 U, 3 U).
– 1 x bottom plate.
– 1 x Sealing material.
– 1 x Mounting kit.
How supplied
– In sets.
Important Note
– Suitable for cooling max. 4 kW thermal load
(at ∆T = 13 K) per switch tube.
– The tube covers part of the front air-intake
perforation with many switch types (as these
are generally located near the front, directly
behind the front 19" extrusion).
– May not be suitable for switches with
different cooling directions.
– The uppermost 3 U in the rack cannot
be used for cooling.
Note
Retrofitting may not be applied due to cables
and other accessories.
Finish
– F inal digit of order number .1:
powder-coated, RAL 7035 light-grey.
– F inal digit of order number .8:
powder-coated, RAL 7021 dark-grey.
W
H
Item
For rack type
Order No.
UP
800
2000
Tube
Miracel®
03.029.200.X
1 set
800
2200
Tube
Miracel®
03.029.202.X
1 set
LUF20367
Dimensions in mm:
W = Width
H = Height
D = Depth
L = Length
AW = Aisle width
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
200 | SmartAisle™ – Containment
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Cooling HDCS
Emerson Network Power
Rack Cooling Solutions
All issues and arguments to date can be summarized under three main criteria for assessing data center
infrastructure.
1. Availability
2. Efficiency
3. Adaptability
The key issue for all data centers is
availability. Maximum computing
power, rapid access or lowest costs,
are of little use if availability is
jeopardized by uncertainties, failures
or even lengthy downtimes.
A customer who can rely on the
availability will still be dissatisfied if
this availability is achieved at the
expense of efficiency. Efficiency must
be seen as a multi-purpose term.
Efficiency covers:
Availability and efficiency are only
sufficient if planning, project management and implementation is short
term rather than sustainable.
Data center services users, whether
it be in-house or a customer that
outsources its computing power, will
only remunerate the finest computing
technology (including cloud computing) if they can rely one hundred
percent on the availability of the data
they need.
The functionality of technical processes, e.g. expressed in the efficiency
of the cooling or power supply.
With Emerson Network Power data
center infrastructure, you are
always in a position to achieve the
degree of availability that matches
your scope of work.
Cost effectiveness in terms of both
investment and running costs. When
we talk about investment, it is not just
the pure equipment investment that
matters;
other important factors are:
Building costs.
Consequential costs for
recirculation facilities
Consequential costs for power
supply
Efficiency of the cooling and
power supply facilities
Consumption values and costs for
operating equipment
Monitoring, service and repair
costs
imely efficiency in relation to
T
processing speed and the period from
data provision to data output.
Future-proofing and adaptability for
Emerson Network Power are also
crucial factors in the development and
delivery of data center infrastructure.
Future-proofing redners data center
infrastrucutre operational even:
there is a demand for increased
computing capacity
the heat loads caused by new
server types – or changes to the
proportions of different server
types – are increased or
redistributed
current flow and speed, volume
flow or the pressure ratios are
changed.
Products from Emerson Network
Power are future-proof and provide an
appropriate and efficient response.
Adaptability delivers highly efficient
results even during planning and
project management and is, naturally,
also part of future-proofing.
Cooling HDCS | 201
Knürr® DCL
Knürr® DCL
Modular Rack Cooling from 6 kW to 60 kW
Rack cooling enables you to expand server performance without interfering with existing room cooling.
The design of Knürr DCL is built on the three principles:
Adaptability
Two "room neutral" architectures
for all power density
Availability
N +1 fan redundancy.
Efficiency
Minimizes power consumption
with controlled EC fans.
Multi-level "fail-safe" controller.
Can be retrofitted easily on site.
Various combinations
from up to four server racks.
Comprehensive alarm and
monitoring functions.
Long freecooling periods due to
large dimensioned heat exchanger.
Automatic emergency door
opening
Knürr DCL with DCM rack
202 | Cooling HDCS
Knürr® DCL
Cooling HDCS | 203
Knürr® DCL
Knürr® DCL Benefits
Availability
An essential requirement for data center
operators is to ensure uninterrupted availability.
Knürr guarantees this by means of:
– Embedded controller hardware guaranteeing
autonomous continued operation of the
control system in the event of a component
failure.
– Access control and data security guaranteed
by means of HTTPS and SNMP V3.
– Alarm management can be integrated
into DCIM (Data Center Infrastructure
Management).
Simple fan replacement
Knürr® DCL fans
Adaptability
The modular DCL design accommodates
frequently changing requirements:
– Two room-neutral cooling architectures for
medium- to high-power density.
– Simple retrofitting on site.
– A number of combinations with up to 4 server
racks to choose from.
Knürr DCM® server rack for cooling with Knürr® DCL, Liebert®;
integrated power distribution modules and cable management.
Switchover between a 2 and 3-way valve
Embedded controller
Detail of the DCL data center
204 | Cooling HDCS
Efficiency
Given current competition, no data center
operator can leave the costs issue to chance.
Anyone who only thinks about the upfront costs
or wants to cut costs at the expense of reliability
will be in for unpleasant surprises later on.
– Greater power density in the data center
results in better use of space and reduced
building costs.
– High cold-water supply temperature increases
the proportion of free cooling during coldwater generation and improves the energy
efficiency rating (EER) of the chiller.
– Low air-side pressure loss reduces the power
consumption of the fans.
Knürr® DCL
Knürr® DCL
Configurations
DCL-L facilitates efficient rack cooling from 1 to 4 server racks
Knürr® DCL – L
Knürr® DCL – H
Knürr® DCL – R
Air flow completely contained in rack
or in the row.
No thermal load or air flow in the room for
greatly reduced noise levels.
Comprehensive separation of IT equipment
and IT room; precisely controlled cooling air
temperature.
No special room requirements; raised floor
not necessary.
Hybrid configuration: Containt warm air
and cold air supplied to the room.
Cooling devices and racks are open at the
front and closed at the rear.
No thermal load in room; warm air
contained within racks.
Cold air distribution throughout the room;
cold air reserve available in the event of
cooling failure.
A better alternative to hot aisle
containment.
Raised floor not required.
Aisle cooling device for SmartAisle
cold aisle containment.
State of the art controller.
Switching to Knürr DCL-L or DCL-H can be
done simply by changing the doors.
Knürr® DCL-L with one-sided connection to Knürr DCM®
Knürr® DCL-H with one-sided connection to Knürr DCM®
*Flow diagram
Knürr® DCL-R with one-sided connection to Knürr DCM®
*Flow diagram
*Flow diagram
* Diagrams show horizontal cross-section from above.
Cooling HDCS | 205
Knürr® DCL
Knürr® DCL
Basic Specifications
Cooling power levels/specification
Knürr® DCL 30 kW
Knürr® DCL 34 kW
Product name Knürr DCL for rack cooling
Knürr DCL30L
Knürr® DCL34L
®
Product name Knürr DCL for hybrid solution
Knürr DCL30H
Knürr® DCL34H
Product name Knürr DCL for aisle cooling
Knürr DCL30R
Knürr® DCL34R
®
®
®
®
®
Nominal cooling power*
Volume flow rate of air
Volume flow rate of water
Max. water pressure
Number of fans
30 kW
34 kW
5000 m3/h
6000 m3/h
4.5 m3/h
5.0 m3/h
10 bar (145 PSI)
10 bar (145 PSI)
5
6
5 x 170 W
6 x 170 W
Height
2000 mm
2200 mm
Width
300 mm
DCL-L
1.200 mm - 1.300 mm
Depth
DCL-H
1.100 mm - 1.300 mm
DCL-R
1.000 mm - 1.300 mm
Max. power consumption of fans
Dimensions
*w
hen cooled at a water temperature of 16/22 °C and air inlet temperature of 43 °C
Knürr® DCL with Knürr® DCM
206 | Cooling HDCS
Knürr® DCL
Knürr® DCL
Order number
Model number – Part 1/2
1
2
3
4
5
6
D
C
L
3
0
L
D
C
L
3
4
H
D
C
L
3
0
R
7
Detail of model
8
9
10
11
12
1. – 3.
DCL (Modular Rack Cooling for Data Centers)
DCL – Knürr® DCL
4. – 5.
Nominal Cooling Capacity
30 – 30 kW (height 2000 mm / 42 U)
34 – 34 kW (height 2200 mm / 47 U)
6.
Application
L – Cooling with closed cold-air circulation (without side panels)
H – Hybrid cooling (open in the front; closed at the rear - without side panels)
R – Cooling with perforated doors (with side panels)
7.
Depth
1 – 1000 mm (only for DCL-R version)
R – 1100 mm (not for DCL-L version)
2 – 1200 mm
H – 1300 mm
8.
Rollers and Ramp for Transport
0 – No rollers (2 devices on one pallet)
D – Transport rollers (one device on one pallet with ramp)
9.
Power Connection
2 – 230 V AC 1-phase 50/60 Hz CE
4 – 230 V AC 1-phase 50/60 Hz CE with A/B switching
2 – 230 V AC 1-phase 50/60 Hz 2-pole CE
B – 230 V AC 1-phase 50/60 Hz 2-pole CE with A/B switching
10.
Water Connection and Heat Exchanger Redundancy
Z – Water connection, bottom
Y – Water connection, top
9 – Water connection, top and bottom
V – Redundant water connection, bottom (external valve)
11.
Filter (only for DCL-R)
N – No filter
A – MERV 1 (not possible for 1000 mm depth)
C – MERV 1, filter monitoring (not possible for 1000 mm depth)
12.
Screen Display
0 – Without
Y – 145 cm display (5.7"); touchscreen
13.
Preparation for Automatic Door Opening
0 – Not prepared
1 – Prepared for one rack with automatic door opener
2 – Prepared for two racks with automatic door opener
3 – Prepared for three racks with automatic door opener
4 – Prepared for four racks with automatic door opener
13
14
15
16
17
Part 2/2
18
19
20
21
22
23
24
14.
Cooling Water Monitoring / Condensate Pump
0 – Without
T – Temperature sensor inlet flow / return flow
4 – Heat meter
5 – Condensate pump
6 – Temperature sensor inlet flow / return flow + condensate pump
7 – Heat meter + condensate pump
15.
Environmental Monitoring
0 – Without
S – Smoke detection
H – Humidity monitoring
B – Smoke detection and humidity monitoring
16.
Color
1 – RAL 7021, (dark-grey)
G – RAL 7035, (light-grey)
2 – No standard color
17. – 18.
Free (for Future Use)
19.
Communication Interface
0 – Standard / always available (HTTPS, SSH, MODBUS TCP, SNMP - to V3)
D – Digital input / output (8/4)
M – Modbus RTU
B – Bacnet
V – 4 digital input / output + Modbus RTU
W – 4 digital input / output + Bacnet
20.
Server Rack Monitoring (Accessory Kit)
0 – Without
1 – Door contacts 1 rack
2 – Door contacts 2 racks
A – Door contacts 3 racks
B – Door contacts 4 racks
3 – 2 x temperature sensors 1 rack
4 – 2 x 2 temperature sensors 2 racks
C – 3 x 2 temperature sensors 3 racks
D – 4 x 2 temperature sensors 4 racks
7 – Door contacts + temperature sensors 1 rack
8 – Door contacts + temperature sensors 2 racks
E – Door contacts + temperature sensors 3 racks
F – Door contacts + temperature sensors 4 racks
21.
Packaging
P = Land freight – short distance (pallet, shrink film, cardboard protection)
S = Sea freight (air freight) – large distance (wooden crate)
22.
Special Note
A = No special customer request to be confirmed by contractor;
standard device
X = Includes special customer request to be confirmed by contractor
23. – 25.
Manufacturer's Configuration Number
25
Cooling HDCS | 207
Knürr® DCD
Knürr® DCD
Cooling Door for Maximum Energy Efficiency
ENP DCD is an air-water heat exchanger that is integrated in the rear
door of a server rack. The heat exchanger is designed to absorb heat loads
of up to 35 kW from server racks.
Compact solution for new and existing data centers.
Highest possible energy efficiency with shortage of fans.
Supports cold-room concept.
Permanent water circulation piping can be routed through
water-carrying hinges.
Opened Knürr® DCD
208 | Cooling HDCS
Knürr® DCD
Cooling HDCS | 209
Knürr® DCD
Knürr® DCD Benefits
Special water-bearing hinge
Availability
– No additional fans are required for cooling; fan
failure is no longer an issue.
– System is highly reliable.
– Fewer sources of failure.
– No additional fans needed; thus no heat is
wasted.
– Guaranteed 35 kW cooling.
– Minimal air pressure drop for cooling air.
– Conduit and collector for condensate water
in the event of the temperature dropping
below dew point. Condensate water is
discharged via a flexible 5/8" hose attached to
a male coupling.
Water-connection fitting for the top
Efficiency
– Optimal space utilization through ultra compact design and hence very low room costs.
– Lowest possible pressure loss in water cooling
circulation: only 54 kPa minimizes energy
consumption of pumps.
– Minimal pressure loss in cooling air flow
through optimized heat exchanger structure
and linear air paths without bends: no energy
costs incurred by additional fan for cooling
unit.
Condensation-water discharge
Condensate pan
Adaptability
– Standard heights for 2000 and 2200 mm
(42 / 47U).
– Standard widths 600, 700 and 800 mm.
– Top or bottom cold-water connection
(field can be adjusted).
– Using a special adapter frame, the Knürr® DCD
cooling door is compatible with server racks
from other manufacturers.
fittings
Pressure drop (Pa)
Pressure drop (in H2O)
Air flow (cfm)
Air flow (m3/h)
35Pa can be handled in servers with typical fans
PUE = 2
PUE = 1.2
Lighting
Electrical losses
Air circulation
Cooling
IT equipment
210 | Cooling HDCS
Knürr® DCD
Knürr® DCL
Configurations
Knürr® DCD open without trim
Server rack cooling components with Knürr® DCD cooling door
Server rack air flow with Knürr DCL (cross-section)
Knürr® DCD/DCM
Basic Specifications
Cooling-air side
Housing material
Sheet steel (powder-coated)
Operating ambient temperature
10 ° C ÷ 35 ° C (50 ° F - 95 ° F) (other temperatures available upon on request)
Max. absolute humidity on site
8 g/kg
Air outlet temperature (as per ASHARE)
18 ° C ÷ 27 ° C (64.4 ° F - 80.6 ° F)
Air temperature difference - OFF
15 K ÷ 20 K
Cold-water side
Cooling power
35 kW
Cold water inlet temperature
12 ° C ÷ 18 ° C (53.6 ° F - 64.4 ° F) (other temperatures available upon on request)
Cold water outlet temperature
18 ° C ÷ 24 ° C (64.4 ° F - 75.2 ° F) (other temperatures available upon on request)
Max. operating pressure
10 bar (145 psi)
Pipe connection IN / OUT
1" female (on frame) (DIN ISO 228-1)
Cooling HDCS | 211
Knürr® DCD
Knürr® DCD
Configuration number
Model number – Part 1/2
1
2
3
4
5
D
C
D
3
5
6
7
Detail of model
8
9
10
11
12
13
14
15
16
17
Part 2/2
18
19
20
21
22
23
1. – 3.
DCD (ENP DCD)
DCD – Data Center Door
10.
Options
0 – No options (N/A at the moment)
4. – 5.
Nominal cooling capacity
30 – 35 kW
11. – 15.
Not in use
0 – No options (N/A at the moment)
6.
Rack height
A – 2,000 mm (78 – 6/8")
B – 2,100 mm (82 – 5/8")
C – 2,200 mm (86 – 5/8")
16.
Color
1 – RAL 7035 (light-grey)
G – RAL 7021 (black-grey)
17. – 20.
Not in use
0 – No options (N/A at the moment)
7.
Rack width
6 – 600 mm (23 – 5/8")
7 – 700 mm (27 – 4/8")
8 – 800 mm (31 – 4/8")
21.
Packaging
P – Landfreight – short distance (Shrink wrap, pallet, cardboard)
S – Long distance (Seafreight) – (Wooden crate)
0 – No packaging (only when Digit 8 = A)
22.
SFA – special features
A – Standard unit
X – SFAs included
23. – 25.
Factory configuration number
8.
9.
Rack type
A – Prepared for DCM rack (separatelly ordered)
3 – 3rd party rack adapter
0 – No rack
CW connection – hinge possition
1 – top left
2 – top right
3 – bottom left
4 – bottom right
212 | Cooling HDCS
24
25
Rack cooling accessories
Rack Cooling Accessories
Knürr® DCL Partition Panels
Application
– Used for changing air flow rate.
Material
– Sheet steel, 1.0 mm.
Color
– Powder coated texture, RAL 7021, dark-grey.
H [mm]
D [mm]
Description
Order No.
2000
1000-1100
Internal side panel front, right H2000 D1000 - 1100 dark-grey
080130708
2000
1200-1300
Internal side panel front, right H2000 D1200 - 1300 dark-grey
080130718
2200
1000-1100
Internal side panel front, right H2200 D1000 - 1100 dark-grey
080130808
2200
1200-1300
Internal side panel front, right H2200 D1200 - 1300 dark-grey
080130818
2000
1000-1100
Internal side panel front, left H2000 D1000 - 1100 dark-grey
080130728
2000
1200-1300
Internal side panel front, left H2000 D1200 - 1300 dark-grey
080130738
2200
1000-1100
Internal side panel front, left H2200 D1000 - 1100 dark-grey
080130828
2200
1200-1300
Internal side panel front, left H2200 D1200 - 1300 dark-grey
080130838
2000
1000
Internal side panel rear, right H2000 D1000 dark-grey
080130748
2000
1100-1200
Internal side panel rear, right H2000 D1100 - 1200 dark-grey
080130758
2000
1300
Internal side panel rear, right H2000 D1300 dark-grey
080130768
2200
1000
Internal side panel rear, right H2200 D1000 dark-grey
080130848
2200
1100-1200
Internal side panel rear, right H2200 D1100 - 1200 dark-grey
080130858
2200
1300
Internal side panel rear, right H2200 D1300 dark-grey
080130868
2000
1000
Internal side panel rear, left H2000 D1000 dark-grey
080130778
2000
1100-1200
Internal side panel rear, left H2000 D1100 - 1200 dark-grey
080130788
2000
1300
Internal side panel rear, left H2000 D1300 dark-grey
080130798
2200
1000
Internal side panel rear, left H2200 D1000 dark-grey
080130878
2200
1100-1200
Internal side panel rear, left H2200 D1100 - 1200 dark-grey
080130888
2200
1300
Internal side panel rear, left H2200 D1300 dark-grey
080130898
Knürr® DCL / DCM Add-on Kit
Application
–C
onnects and seals the DCL and DCM racks.
Material
– Metal plate, plastic extrusion strips, foam
strips.
Consists of
–C
onnection plates, vertical sealing strips,
horizontal sealing strip.
Description
Order No.
Add-on kit DCL / DCM
080134530
Cooling HDCS | 213
Rack cooling accessories
Knürr® Chilled Water Connecting Kit
Inner diameter
– 31 mm.
r
tu
re
Application
– S imple connection to water circulation,
simple start-up.
low
nf
Connections
– Threaded connection, 1 1/4"(or 1"),
flat sealing.
Consists of
–T
wo flexible armored tubes, stainless steel
plated, water-resistant and frost-resistant
EPDM. Nickel-plated pipe connections.
w
flo
et
inl
To the coolingwater system
Draining and purging valve with nipple for measurement device
connection (3/4", female) (for measuring water flow rate)
Temperature range
– 0 – 110° C.
Length
– 1500 mm.
Ball valve connections
– 1 1/4" (or 1").
Operating pressure
– Max. 10 bar.
Shut-off and control valves with 3/4" draining and
purging connection and a nipple for measuring
pressure and temperature.
Connections: 1 1/4" (or 1").
Description
Order No.
Cold-water connection kit 5/4" (for DCL)
080090910
Cold-water connection kit 1" (for CoolTherm and DCD)
080090660
Ball valve
Shut-off and control valves
(to set the volumetric flow rate)
Knürr® DCL Plinth
Application
– F or installing lower cold-water connection
without a raised floor.
Color
– Powder-coated,
RAL 7021 - dark-grey,
RAL 7035 - light-grey.
Material
– S heet steel, 1.0 mm.
214 | Cooling HDCS
H [mm]
D [mm]
Description
Order No.
100
1000
Plinth H100 D1000 dark-grey
011479838
100
1100
Plinth H100 D1100 dark-grey
011479848
100
1200
Plinth H100 D1200 dark-grey
011479858
100
1300
Plinth H100 D1300 dark-grey
011479868
100
1000
Plinth H100 D1000 light-grey
011479831
100
1100
Plinth H100 D1100 light-grey
011479841
100
1200
Plinth H100 D1200 light-grey
011479851
100
1300
Plinth H100 D1300 light-grey
011479861
200
1000
Plinth H200 D1000 dark-grey
011479788
200
1100
Plinth H200 D1100 dark-grey
011479798
200
1200
Plinth H200 D1200 dark-grey
011479808
200
1300
Plinth H200 D1300 dark-grey
011479818
200
1000
Plinth H200 D1000 light-grey
011479781
200
1100
Plinth H200 D1100 light-grey
011479791
200
1200
Plinth H200 D1200 light-grey
011479801
200
1300
Plinth H200 D1300 light-grey
011479811
Rack cooling accessories
Knürr® Additional Temperature Sensor Kit
Application
– F or installing the remote temperature measuring point (e. g. in SmartAisle containment).
Consists of
– Sensor module, temperature sensor with
cable and plug.
Description
Order No.
Temperature sensor
400006856
Analog sensor module
400006853
Sensor module
Temperature sensor with cable and plug
Cooling HDCS | 215
Knürr PowerTrans2®
Knürr PowerTrans2®
Power Distribution Rack
Features
The Knürr PowerTrans2 has a
modular design with a versatile
plug-in units that can be used as
required.
P
lug and Play:
Only the main feed must be
installed by a qualified electrician.
The Knürr PowerTrans2 forms the interface between the low-voltage
power supply and rack PDUs as well as further components for supplying
servers and other IT devices.
Rack basics: connecting the Knürr DCM rack and the existing PowerTrans2
19" plug-in units simply involves slotting the elements into a free slot and
securing them. The rack is then immediately connected to the power supply.
The power is distributed via the individual slot-in units, avoiding installation
within the building.
The plug-in units can be inserted
during operation; there are no
downtimes.
Elementary model:
Power distribution unit
without metering.
Metered version:
Power distribution unit offers
extensive metering functions
with a high level of accuracy
(up to ±1 %).
Highest power density:
up to max. 346 kVA.
PowerTrans2: 19" slot-in
216 | Power Distribution Rack
Input Power
Max. 250 A per phase.
1 ph. or 3 ph. feed.
Max. 2 feeds per rack.
Modularity
Output distributors can be installed
as modules during running operation.
Output Distributor
230/400V – 32A via IEC 60309 socket.
230/400V – 16A via GST 18 socket.
230V – 32A via IEC 60309 socket.
230V – 16A via GST18 socket.
Monitoring
Input level.
Knürr PowerTrans2®
Knürr PowerTrans2®
Power distribution unit between
Liebert® APM™ UPS system and MPX rack PDUs
MPX adaptive rack PDUs
Liebert® APM™ UPS
system
Power distribution rack
Knürr PowerTrans2®
Feed B
Feed A
Benefits
Two feeds (A + B) available for each rack.
Optimum power distribution from the Liebert® APM™ UPS system to the MPX
rack PDUs.
Each phase input from the Knürr PowerTrans2® is monitored and evaluated.
The PowerTrans2 Basic can be populated with a maximum of 9 plug-in units,
while the metered version can be populated with a maximum of 8 plug-in
units.
Minimal footprint due to a rack width of 600 mm.
Power Distribution Rack | 217
Knürr PowerTrans2®
Knürr PowerTrans2® 19" Power Distribution Rack
Elementary and Monitored type
– F eed of 2 separate 3-phase 400V mains, L1,
L2, L3, N, PE.
– E ach with a 250 A circuit breaker in the input.
–D
istribution to the individual plugs via busbars
and contact-safe plug-in connections.
–U
p to 8 (Monitored) / 9 (Elementary) slot-in
units where A feed and B feed are possible.
Monitored type
–P
rovides the following phase-input data:
voltage, current, effective power, consumption and frequency.
–P
ower alarm functions for the individual
phases and their operating status are also
supported.
Technical data Interfaces
–R
J-45 LAN port (10/100 MBit) – for connecting
to local network (LAN) via an Ethernet cable.
– S erial interface: RS485.
–R
emote management: Onboard Web
Interface, SNMPv1,2,3, SSH and Syslog can
be integrated into Nform & Trellis as well as
Nagios or other management software
programs.
Knürr PowerTrans2
218 | Power Distribution Rack
Material / Finish
– Basic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Perforated front door.
– Rear door, double, closed.
– Covers, zinc-passivated sheet steel,
powder-coated texture.
Color
– RAL 7021 dark-gray.
Scope of delivery
– 1 x rack with covers, front door, rear door.
– 1 x set of safe-contact busbars, for A feed
and B feed.
– 2 x circuit breakers, max. 250 A.
– 16 x (Monitored type) / 18 x (Elementary
type) power supply plugs for the slot-in units
wired on the busbars.
– 1 x 19" PowerTrans2 metering slot-in unit
(Monitored type).
– 2 x 19" T-slot extrusions.
– 18 x chassis runners.
– 1 x complete earthing set.
W
H
D
U
Model
Cable entry
Order No.
UP
600
2000
1000
42
Elementary
Below
03.014.600.8.004
1
600
2000
1100
42
Elementary
Below
03.014.600.8.005
1
600
2000
1200
42
Elementary
Below
03.014.600.8.006
1
600
2200
1000
47
Elementary
Below
03.014.600.8.010
1
600
2200
1100
47
Elementary
Below
03.014.600.8.011
1
600
2200
1200
47
Elementary
Below
03.014.600.8.012
1
600
2000
1000
42
Monitored
Below
03.014.601.8.004
1
600
2000
1100
42
Monitored
Below
03.014.601.8.005
1
600
2000
1200
42
Monitored
Below
03.014.601.8.006
1
600
2200
1000
47
Monitored
Below
03.014.601.8.010
1
600
2200
1100
47
Monitored
Below
03.014.601.8.011
1
600
2200
1200
47
Monitored
Below
03.014.601.8.012
1
600
2000
1000
42
Elementary
Above
03.014.602.8.004
1
600
2000
1100
42
Elementary
Above
03.014.602.8.005
1
600
2000
1200
42
Elementary
Above
03.014.602.8.006
1
600
2200
1000
47
Elementary
Above
03.014.602.8.010
1
600
2200
1100
47
Elementary
Above
03.014.602.8.011
1
600
2200
1200
47
Elementary
Above
03.014.602.8.012
1
600
2000
1000
42
Monitored
Above
03.014.603.8.004
1
600
2000
1100
42
Monitored
Above
03.014.603.8.005
1
600
2000
1200
42
Monitored
Above
03.014.603.8.006
1
600
2200
1000
47
Monitored
Above
03.014.603.8.010
1
600
2200
1100
47
Monitored
Above
03.014.603.8.011
1
600
2200
1200
47
Monitored
Above
03.014.603.8.012
1
Knürr PowerTrans2®
Knürr PowerTrans2® 19" Slot-in Power Distributor
–Power distributor slot-in for PowerTrans2 rack.
–Also functions without PowerTrans2 rack
if used with a suitable connection cable.
–19" slot-in housing.
–Width 19".
–Height: 3 U.
PowerTrans2
Inputs
–Depth: 480 mm.
–Color: RAL 7021 dark-gray.
–2 separate 3-phase inputs with
max. 63 A phase current (feed A + feed B).
–Outputs are shown in the table below.
–Backups: 1-pole (for single-phase) or
3-pole (for 3-phase). 2-pole or 4-pole backups
aviable upon request.
Outputs
Phase tap
per feed
Feed A
Order No.
Feed B
L1-N, L2-N, L3-N
6 x 230Vac 16 A GST 18i3
L1-N, L2-N
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h 2 x 230Vac 32 A IEC60309 1ph/N/PE 6h 03.014.011.8.005
6 x 230Vac 16 A GST 18i3
L2-N, L3-N
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h 2 x 230Vac 32 A IEC60309 1ph/N/PE 6h 03.014.011.8.006
L3-N, L1-N
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h 2 x 230Vac 32 A IEC60309 1ph/N/PE 6h 03.014.011.8.007
L1-N, L2-N, L3-N
3 x 230/400Vac 3 x16 A GST18i5
3 x 230/400Vac 3 x 16 A GST18i5
03.014.012.8.002
L1-N, L2-N, L3-N
2 x 230/400Vac 3 x 32 A IEC60309
3ph/N/PE 6h
2 x 230/400Vac 3 x 32 A IEC60309
3ph/N/PE 6h
03.014.012.8.003
03.014.011.8.002
Knürr PowerTrans2® Connection Cable
–Connection cable between
19" power distributor slot-in and rack PDUs
Length
Input connector
Output socket
Order No.
5000
230Vac 16 A GST 18i3
230Vac 16 A IEC60320 C19
03.014.013.9.001
5000
230Vac 16 A GST 18i3
230Vac 16 A IEC60309 1ph/N/PE 6h
03.014.013.9.003
5000
230/400Vac 3 x 16 A GST 18i5
230/400Vac 3 x 16 A IEC60309 3ph/N/PE 6h
03.014.014.9,001
5000
230Vac 32 A IEC60309 1ph/N/PE 6h
230Vac 32 A IEC60309 1ph/N/PE 6h
On request
5000
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
03.014.014.9.003
10000
230VAc 16 A GST 18i3
230VAc 16 A IEC60320 C19
03.014.013.9.002
10000
230Vac 16 A GST 18i3
230Vac 16 A IEC60309 1ph/N/PE 6h
03.014.013.9.004
10000
230/400Vac 3 x 16 A GST 18i5
230/400Vac 3 x 16 A IEC60309 3ph/N/PE 6h
03.014.014.9.002
10000
230Vac 32 A IEC60309 1ph/N/PE 6h
230Vac 32 A IEC60309 1ph/N/PE 6h
On request
10000
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
03.014.014.9.004
Power Distribution Rack | 219
Emerson Network Power – Power Distribution Units
Rack PDUs MPX, MPH2 and MPE
Your product range for the highest data center demands
The key aspects of this product range are:
H
igh availability for connected electrical loads.
O
ptimized energy and capacity management.
S
implified integration into management tools.
S
implified physical and electrical installation.
Overview: Emerson Network Power Rack PDUs for Europe
MPX-Adaptive Rack PDU
Features
MPX-R
MPX-B
MPH2-Managed Rack PDU
MPX-E
MPE Rack PDU
MPH2-R
MPH2-M
MPH2-C
MPH2-B
MPE
Modular
Remote
interface
*
Measurement
per phase
*
Measurement
per group
Measurement
per output
Switching
per output
Measurement
parameters
Input
Outputs
A, V, W, kWh, VA,
Hz, power factor,
crest factor
A, V, W, kWh, VA,
Hz, power factor
A, V, W, kWh, Hz
A, V, W, kWh, VA,
Hz, power factor,
crest factor
A,V,W,kWh, VA,
Hz, power factor,
crest factor
A,V,W,kWh, VA,
Hz, power factor
A,V,W,kWh, VA,
Hz, power factor
1 ph + 3 ph
max. 63 A
1 ph + 3 ph
max. 63 A
1 ph + 3 ph
max. 63 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 63 A
IEC C13 & C19
Schuko
IEC C13 & C19
Schuko
IEC C13 & C19
Schuko Switzerland
GST18
IEC C13 & C19
IEC C13 & C19
IEC C13 & C19
IEC C13 & C19
IEC C13 & C19
Schuko
Sensor
connections
*
The range of MPX and MPH2 accessories is almost identical, which simplifies administration!
* Only in conjunction with MPX-PEM monitored.
220 | Rack PDUs
Emerson Network Power – Power Distribution Units
DI-STRIP® Socket System
Your product range to cover basic requirements in all areas
The key aspects of this product range are:
R
obust design with the highest level of quality.
C
ost effective thanks to flexible and simple assembly.
N
umerous designs for all application areas in IT, network
technology, laboratories, and in the home.
Overview: Emerson Network Power DI-STRIP for Europe
Features
DI-STRIP® RM
DI-STRIP® M
DI-STRIP® E
A
A
1 ph + 3 ph
max. 16 A
1 ph + 3 ph
max. 16 A
1 ph + 3 ph
max. 16 A
IEC C13 & C19 Schuko, France, Switzerland
IEC C13 & C19 Schuko, France, Switzerland
IEC C13 & C19 Schuko, France, Switzerland
Local display
Remote interface
Measurement per phase
Measurement parameters
Input
Outputs
Rack PDUs | 221
MPX™
MPX™ – Adaptive Rack PDU
Respond to change and maximize profits
No-one can make definite predictions about the power-supply demands the future will bring. But one thing is certain: the versatile, adaptive MPX rack PDUs equip you with the wherewithal to face all eventualities. They enable
you to react quickly to changes in rack equipment and provide dynamic capacities, offering:
Modular hot-swap-enabled output power
Modular hot-swap-enabled communication
Modular input power.
Benefits of MPX
Adaptive capacity, distribution,
monitoring, control and administration of critical equipment.
Flexibility in reacting to constant
changes – modules can be regrouped
to accommodate altered requirements.
Only purchase what you really need
and utilize existing investments.
Reliable communication.
Developed for critical environments
Critical rack operating temperature – of up to 60° C suitable for high
temperatures inside racks.
Accurate voltage and current metering with tolerances of ±1 % offer a
comprehensive overview.
Energy and power metered with outstanding precision all the way through
to output level.
Extensive alert function; including notification before failure occurs.
Monitoring of environment conditions including alerts and alarms.
Notification upon failure or if individual components are removed.
Flexible, configurable input and
output distribution
The scalable design of the MPX rack
PDU allows on-site configuration that
meets the current requirements of the
IT equipment. It is the perfect solution
for coping with the ever increasing demands of expanding data centers. You
can set up your IT equipment at another location or add new components
to extend your environment. All you
need to do in this case is simply reconfigure the power supply and the power
distribution.
Hot-swap-enabled
output module
Simple
implementation for
quick start-up of IT
equipment.
Equipped to face the demands of
today and tomorrow
The MPX rack PDU supports a variety of
configurations for single-phase and
three-phase power inputs enabling
changes while retaining the distribution infrastructure.
Outputs and
modules
Outputs can be
controlled and measured
remotely thereby
increasing flexibility and
on-site security.
Modular input power.
Can be reconfigured for altered power demands; single-phase and three-phase input.
Module can be fitted on top or at the bottom.
222 | Rack PDUs
MPX™
The busbar (MPX™ PRC):
Serves as power and communication
distribution for all supported
modules. Available in two heights to
accommodate different rack heights.
Output module (MPX™ BRM):
Provides overload protection by distributing power to individual
servers. Available functions: Elementary, Branch Metering and
Output Metering with switch function.
Power-rail spacer:
Reserves unused space until needed for
an MPX™ module.
BDM™ local display module
Extended diagnostic functionality;
customer-convenient display. Features
include detailed information about alerts
and specific labeling for outputs.
SN sensors:
Consolidates environmental monitoring of temperature,
humidity and potential-free input contacts with the power
supply at rack level.
Communication module (RPC2):
Input module (MPX™ PEM):
Routes the input power to the busbar system of the
Elementary model (without RPC2™) and the version with
input metering (includes pre-installed RPC2™).
Installed in the power input module and
offers an extendable interface for network
communication, sensors and the local
display.
Rack PDUs | 223
MPX™
MPX™
Benefits of the modular MPX rack PDU
INPUT POWER
Configurable: 20 to 60 A (USA);
16 to 63 A (EU).
Single-phase and three-phase.
Cable routing possible from
above and below.
OUTPUT DISTRIBUTOR
Scalable, combination-compatible
and can be replaced during
operation
Single-phase NEMA 5-20R, IEC-C13,
IEC-C19, Schuko, Switzerland,
GST18.
Load balance.
MODULARITY
Input modules.
Output modules.
External display.
External sensors.
RPC2 communication card.
MONITORING
Three levels: Input level,
module level, output level.
Temperature and humidity.
Door contacts and floating break
input contacts.
REMOTE CONTROLLED SOCKETS
Socket level.
Featuring High Availability
Heat resistant up to 60° C ensuring reliable operation in the warm aisle.
Modular hot-swap-enabled output module, controller card and sensors;
can be exchanged or updated during operation.
Special switch relay (normally closed); connected servers have an
uninterrupted power supply even in the event of failure.
Redundant power supply for control electronics.
Fixed databus on the busbar.
Complete data tapping on the Power Entry Module (PEM) without any
additional external monitoring devices.
Proactive alert by additional metering of the neutral conductor and
crest factor (assessment of network quality facilitating early detection of
power-supply unit failures).
Maximum Flexibility and Scalability
All modules configured in line with requirements (patented quick-mount
fitting for safe installation).
One busbar for different networks and power levels – input module can
be freely selected. All other components are "hot-swap-enabled" when
running operation.
Mobile display for reading all MPX data on the rack.
Optical slot-space display (easy server slot-space identification at the push
of a button).
Highest Possible Power Levels in all Areas
Power feed of max. 3 x 63 A; optimal for Blade server applications.
Only one IP address for up to 4 rails with 24 modules.
Plug and Play for numerous sensors.
Extensive monitoring with a metering accuracy of ±1 % right through to
output level.
Module and sensor autodetect function with operating software.
Minimal power loss for MPX systems.
224 | Rack PDUs
MPX™
MPX™
Four equipment models for different requirements
The MPX modular rack PDU consists
of various components. The basic
element is a busbar, which is responsible for the power and communication distribution to the individual
modules. The input power is routed
via the MPX Power Entry Module
(MPX PEM) to the MPX system.
Different output modules (MPX
Branch Receptacle Modules, MPX
BRM) are available depending on
requirements. Four different variants
can be set up depending on the component population of the busbars:
1. MPX Elementary
Modular basic power distribution without metering and control function. An
upgrade to another equipment model
is quick and easy.
2. MPX Elementary Phase
Monitored
Modular power distribution with metering on input. An upgrade to a superordinate line is possible by populating
with appropriate output modules.
3. Branch-Monitored MPX
Modular power distribution with metering on input and each output module.
An upgrade or downgrade to another
line is possible if installed with
appropriate output modules.
4. Receptacle Managed MPX
Modular power distribution with input,
metering, each output module and
each output. Individual outputs can
also be switched on and off remotely.
A downgrade to another line is possible
if installed with the appropriate output
modules.
A combination of the "Elementary
Phase Monitored", "Branch-Monitored"
and "Receptacle Managed" lines on a
shared busbar is also possible and is one
of the exceptional features of the MPX.
Interfaces for the network communi­
cation, sensors and/or local display are
provided by the Rack PDU Card (RPC)
in the MPX PEM. The RPC Card enables
connection to an optional RPC Basic
Display Module (RPC BDM) to display
local status and alerts.
Output module
Receptacle Managed
Busbar (MPXT PRC)
Distributes power and
communication signals
to all modules.
Branch-Monitored
output module
(MPX BRM)
Spacer for busbars
Fills unused gaps until a
Liebert MPX module is
upgraded.
Output module
e. g. Elementary
(MPX BRM)
Input module
(MPX PEM)
Routes input power and
data (depending on the
module type) to the
busbar system.
Rack PDUs | 225
MPX™
MPX™ – Configuration models in Europe
Four equipment models
Order number
Length 1035
MPXPRC-V1035XXX
Length 1880
MPXPRC-V1880XXX
Length 2144
MPXPRC-V2146XXX
1ph 16A fest
MPXPEM-EHABXS30
Input Modules
3ph 16A fixed
3ph 32A fixed
3ph 63A fixed
Elementary
Output Modules
Branch-Monitored
Output Modules
Receptacle Managed
Output Modules
Sensors
External Display
MPX™
Receptacle Managed
MPXPEM-EHAEXQ30
MPXPEM-EHABXQ30
MPXPEM-EHAEXT30
MPXPEM-EHABXT30
MPXPEM-EHAEXR30
MPXPEM-EHABXR30
MPXPEM-EHBEXZ30
MPXPEM-EHBBXZ30
IEC-C13 L1
MPXBRM-EEBC7N1N
IEC-C13 L2
MPXBRM-EEBC7N2N
IEC-C13 L3
MPXBRM-EEBC7N3N
IEC-C19 L1
MPXBRM-EEBC4O1N
IEC-C19 L2
MPXBRM-EEBC4O2N
IEC-C19 L3
MPXBRM-EEBC4O3N
Schuko L1
MPXBRM-EEBC3P1N
Schuko L2
MPXBRM-EEBC3P2N
Schuko L3
MPXBRM-EEBC3P3N
Switzerland T23
MPXBRM-EEBC4S1N
Switzerland T23
MPXBRM-EEBC4S2N
Switzerland T23
MPXBRM-EEBC4S3N
GST18
MPXBRM-EEBC9U1N
GST18
MPXBRM-EEBC9U2N
GST18
MPXBRM-EEBC9U3N
IEC-C13 L1
MPXBRM-EBBC6N1N
IEC-C13 L2
MPXBRM-EBBC6N2N
IEC-C13 L3
MPXBRM-EBBC6N3N
IEC-C19 L1
MPXBRM-EBBC4O1N
IEC-C19 L2
MPXBRM-EBBC4O2N
IEC-C19 L3
MPXBRM-EBBC4O3N
Schuko L1
MPXBRM-EBBC3P1N
Schuko L2
MPXBRM-EBBC3P2N
Schuko L3
MPXBRM-EBBC3P3N
IEC-C13 L1
MPXBRM-ERBC6N1N
IEC-C13 L2
MPXBRM-ERBC6N2N
IEC-C13 L3
MPXBRM-ERBC6N3N
IEC-C19 L1
MPXBRM-ERBC4O1N
IEC-C19 L2
MPXBRM-ERBC4O2N
IEC-C19 L3
MPXBRM-ERBC4O3N
Schuko L1
MPXBRM-ERBC3P1N
Schuko L2
MPXBRM-ERBC3P2N
Schuko L3
MPXBRM-ERBC3P3N
1xTemp.
SN-Z01
3xTemp.
SN-Z02
3xT. + 1xHum
SN-Z03
1xTemp. Mod.
SN-T
Temp/Hum Mod.
SN-TH
2xDoor Mod.
SN-2D
3xInput Mod.
MPX™
Branch-Monitored
SN-3C
RPCBDM-1000
Different combinations available
226 | Rack PDUs
*Note: One-phase input modules can only be populated with L1 modules.
1ph 32A fixed*
MPX™
Elementary
Phase-Monitored
Upgrade possible
Busbar
MPX™
Elementary
MPX™
MPX™ – Input Module/Power Supply
Elementary and Monitored type
–The MPX PEM is fixed on the MPX PRC and
provides the connection to the power supply.
–Fixed-connection cable; 3 m long.
–With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red.
Monitored type
–The MPX PEM provides connection to the
databus for data communication.
–Integrated RPC2 communication card enables
remote monitoring and maintenance of the
MPX modules.
–Provides the following phase-input data:
voltage, current, effective power, consumption
and frequency.
–Power alarm functions for individual phases and
their operating status are also supported.
–Further important features: Three displays
inform the user on the current status of
each individual input. An acoustic alarm is
activated at certain overload conditions.
–The communication card centralizes the
MPXs local and remote administration.
–Serves as the connection point for versatile
support options and devices, such as the display
module (RPC BDM), various sensors and
connection to other MPX™ or MPH2™ systems,
for example.
–Has RJ-45 ports for all connections (except USB
port) and does not require any special cabling.
DOS20153
Technical Data Interfaces:
–R
J-45 LAN port (10/100 MBit) – for local
network (LAN) connection via an Ethernet
cable.
– E xpansion / administration port for local
configuration using a computer / laptop,
for creating a link-up of several PDUs
(MPX or MPH).
– S erial interface RS232.
Dimensions in mm:
– Display port for connecting the RPC BDM
(display module).
– External sensor port for connecting optional
sensors.
– Remote management: Onboard Web
interface, CLI, SNMPv1,2,3, SSH, Telnet Syslog,
compatible with Avocent ACS, UMG & MPU,
SiteScan, DSView, Rack Power Manager,
Nform & Trellis as well as Nagios or other
management software programs.
– Authentication: local, remote: Active
Directory, LDAP, TACACS, Radius, Kerberos.
– Encryption: MD5, AES, DES.
M
aterial / Finish
– Enclosure: aluminum.
– Cover: sheet steel.
– Power contacts: silver-plated.
– Databus contacts: gold-plated
(only Monitored type)
Dimensions
– Width: 75 mm.
– Height: 65 mm.
– Feed cable: 3 m.
Color
– Enclosure: aluminum/RAL7021 dark-gray
Certification
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
Scope of delivery
– 1 x MPX PEM power input module.
– Including connection cable.
– Including RPC2 communication card
(only Monitored type).
L
W
H
Feed
Load rating
Type
Order No.
UP
220
75
65
Fixed
230 VAC, max. 32 A
Elementary
MPXPEM-EHAEXQ30
1 unit
220
75
65
Fixed
230/400 VAC, max. 16 A
Elementary
MPXPEM-EHAEXT30
1 unit
220
75
65
Fixed
230/400 VAC, max. 32 A
Elementary
MPXPEM-EHAEXR30
1 unit
266
75
65
Fixed
230/400 VAC, max. 63 A
Elementary
MPXPEM-EHBEXZ30
1 unit
220
75
65
Fixed
230VAC,max.16A
Monitored
MPXPEM-EHABXS30
1 unit
220
75
65
Fixed
230 VAC, max. 32 A
Monitored
MPXPEM-EHABXQ30
1 unit
220
75
65
Fixed
230/400 VAC, max. 16 A
Monitored
MPXPEM-EHABXT30
1 unit
220
75
65
Fixed
230/400 VAC, max. 32 A
Monitored
MPXPEM-EHABXR30
1 unit
266
75
65
Fixed
230/400 VAC, max. 63 A
Monitored
MPXPEM-EHBBXZ30
1 unit
Conversion:
W = Width
n = Number of sockets
H = Height
F1 = Standard side panel
L = Length
F2 = Design side panel
S = Switch
19" = ideal for 19" components
U
= Standard rack unit
1 U = 44.45 mm
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Safe = child-proof
Replace .x with the number of the color combination you require: .1 = RAL 7035, .6 = RAL 7035/RAL 2003
Rack PDUs | 227
MPX™
MPX™ BRM – Output Module
–The MPX BRM enables the distribution
to the individual consumers.
–Each module taps a color-coded phase.
–All modules are protected against overload
with a 20 A circuit breaker.
–Modules can be exchanged during operation
thereby facilitating user-specific installation
without having to shut down the MPX.
–Up to 3 BRM output modules can be installed on
a 1,035 mm PRC busbar; up to 6 BRM output
modules can be installed on a 1,880 mm PRC
busbar.
DOS20153
Type E – Elementary
–Module for power distribution via respective
outputs.
Type B – Branch-Monitored
–Module for power distribution via respective
outputs with metering function on module
level.
–The MPX BRMs have LED ID indicator which
identifies every module with a number.
–Modules are administered in the software.
–Provides the following metered readings:
voltage, current, power, apparent power, kWh
and power factor.
–Power alarm functions and operating status are
supported.
Type R – Receptacle Managed:
–Module for power distribution via respective
outputs with metering function on module level
and output level.
–The MPX BRMs have LED ID indicator which
identifies every module with a number.
–Modules are administered in the software.
–Provides the following metered readings:
voltage, current, power, apparent power, kWh,
frequency, power factor and crest factor.
–Power alarm functions and operating status are
supported.
–Individual outputs can be switched on and off
remotely.
228 | Rack PDUs
M
aterial / Finish
– Enclosure: aluminum.
– Cover: sheet steel.
– Power contacts: sliver-plated.
–D
atabus contacts: gold-plated
(only type B and R).
Dimensions
– Width: 75 mm.
– Height: 65 mm.
Color
– Enclosure: aluminum/RAL7021 dark-gray
Certification
– CE label in accordance with Low Voltage
Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
Scope of delivery
– 1 x MPX PEM power output module.
– 1 x instruction manual.
L
n
Outputs
Load rating per output
Phase tap
Type Order No.
UP
266
7
IEC320 C 13
10 A
L1
E
MPXBRM-EEBC7N1N
1 unit
266
7
IEC320 C 13
10 A
L2
E
MPXBRM-EEBC7N2N
1 unit
266
7
IEC320 C 13
10 A
L3
E
MPXBRM-EEBC7N3N
1 unit
266
4
IEC320 C 19
16 A
L1
E
MPXBRM-EEBC4O1N
1 unit
266
4
IEC320 C 19
16 A
L2
E
MPXBRM-EEBC4O2N
1 unit
266
4
IEC320 C 19
16 A
L3
E
MPXBRM-EEBC4O3N
1 unit
266
3
Schuko CEE 7/4
16 A
L1
E
MPXBRM-EEBC3P1N
1 unit
266
3
Schuko CEE 7/4
16 A
L2
E
MPXBRM-EEBC3P2N
1 unit
266
3
Schuko CEE 7/4
16 A
L3
E
MPXBRM-EEBC3P3N
1 unit
266
4
Switzerland T23
16 A
L1
E
MPXBRM-EEBC4S1N
1 unit
266
4
Switzerland T23
16 A
L2
E
MPXBRM-EEBC4S2N
1 unit
266
4
Switzerland T23
16 A
L3
E
MPXBRM-EEBC4S3N
1 unit
266
9
GST18 3-pole
16 A
L1
E
MPXBRM-EEBC9U1N
1 unit
266
9
GST18 3-pole
16 A
L2
E
MPXBRM-EEBC9U2N
1 unit
266
9
GST18 3-pole
16 A
L3
E
MPXBRM-EEBC9U3N
1 unit
266
6
IEC320 C 13
10 A
L1
B
MPXBRM-EBBC6N1N
1 unit
266
6
IEC320 C 13
10 A
L2
B
MPXBRM-EBBC6N2N
1 unit
266
6
IEC320 C 13
10 A
L3
B
MPXBRM-EBBC6N3N
1 unit
266
4
IEC320 C 19
16 A
L1
B
MPXBRM-EBBC4O1N
1 unit
266
4
IEC320 C 19
16 A
L2
B
MPXBRM-EBBC4O2N
1 unit
266
4
IEC320 C 19
16 A
L3
B
MPXBRM-EBBC4O3N
1 unit
266
3
Schuko CEE 7/4
16 A
L1
B
MPXBRM-EBBC3P1N
1 unit
266
3
Schuko CEE 7/4
16 A
L2
B
MPXBRM-EBBC3P2N
1 unit
266
3
Schuko CEE 7/4
16 A
L3
B
MPXBRM-EBBC3P3N
1 unit
266
6
IEC320 C 13
10 A
L1
R
MPXBRM-ERBC6N1N
1 unit
266
6
IEC320 C 13
10 A
L2
R
MPXBRM-ERBC6N2N
1 unit
266
6
IEC320 C 13
10 A
L3
R
MPXBRM-ERBC6N3N
1 unit
266
4
IEC320 C 19
16 A
L1
R
MPXBRM-ERBC4O1N
1 unit
266
4
IEC320 C 19
16 A
L2
R
MPXBRM-ERBC4O2N
1 unit
266
4
IEC320 C 19
16 A
L3
R
MPXBRM-ERBC4O3N
1 unit
266
3
Schuko CEE 7/4
16 A
L1
R
MPXBRM-ERBC3P1N
1 unit
266
3
Schuko CEE 7/4
16 A
L2
R
MPXBRM-ERBC3P2N
1 unit
266
3
Schuko CEE 7/4
16 A
L3
R
MPXBRM-ERBC3P3N
1 unit
MPX™
MPX™ PRC – Power Distribution Unit / Communication Bus
–The MPX PRC is the basic element of the
MPX power distribution unit.
–Power and data transfer buses are integrated
across the entire length of the MP PRC.
–The MPX BRMs (output modules) and the MPX
PEM (power input module) are fixed on the MPX
PRC and, depending on the type, facilitate the
modules' power feed, output, monitoring and
management.
Material / Finish
– Busbar housing: aluminum.
– Busbars: copper.
– Databus: gold-plated.
Approvals
– CE label in accordance with Low Voltage
Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
Load rating
– Max. current: 3 x 63 A.
– Nominal voltage (L-N / L-L): 230 / 400 VAC.
Scope of delivery
– 1 x MPX PRC - power distribution unit /
communication bus.
– 1 x mounting kit.
Dimensions
– Width: 68 mm.
– Height: 24 mm.
DOS20153
Color
– Enclosure: aluminum.
L
W
H
U
Model
Order No.
UP
1035
68
24
23
1 PEM (220 mm) + 3 BRM
MPXPRC-V1035XXX
1 unit
42
1880
68
24
2144
68
24
1 PEM (220/266 mm) + 6 BRM
MPXPRC-V1880XXX
1 unit
1 PEM (220/266 mm) +7 BRM
MPXPRC-V2146XXX
1 unit
MPX™/MPH™/MPH2™/IMS™ – Sensors
DOS20153
–These sensors are designed for tool-less
installation in a Knürr Miracle / DCM rack, and is
also compatible with all other rack types.
–"Fixed" type sensors are attached to a cable.
–"Modular" type sensors can be connected to the
delivered cable.
–Plugged into the RPC-1000 or RPC2
communication card.
–Several sensors can be connected in rows.
–Automatically displayed in the MPX/MPH/
MPH2/IMS software.
–Temperature measurement range: 5 – 60° C.
–Accuracy: ± 0.5° C.
–Humidity measurement range: 10 – 95 %.
–Accuracy: ± 3.5 %.
Note
Sensors are not required for operating the MPX
or MPH, MPH2, IMS. However, a communication
card is needed.
Scope of delivery
– 1 x sensor with connection cable.
– 1 x instruction manual.
Cable length Type
Model
Order No.
UP
3660
Fixed
Temperature sensor, single
SN-Z01
1 unit
5180
Fixed
Temperature sensor, triple
SN-Z02
1 unit
5180
Fixed
Temperature sensor, triple + humidity sensor, single
SN-Z03
1 unit
2000
Modular
Temperature sensor, single
SN-T
1 unit
2000
Modular
Temperature sensor, single + humidity sensor, single
SN-TH
1 unit
2000
Modular
2 x door contact - input module*
SN-2D
1 unit
2000
Modular
3 x digital input
SN-3C
1 unit
* Suitable door contact switch: Order no.: 06.108.115.9
Rack PDUs | 229
MPX™
RPC BDM - 1000 Display Module
DOS20153
–Provides the local display of the monitored
data for all connected MPX/MPH/MPH2/IMS
systems.
–Operated with a navigation switch.
–Connected via a cable with the RPC, enabling
the user to place the displays where they can be
easily read in the given local space conditions.
–An individual display can be used for up to
four MPX/MPH/MPH2/IMS PDUs, which are all
connected in a PDU array.
Note
The display module is not required when
operating the MPX or MPH, MPH2, IMS.
However, a communication card is needed.
Scope of delivery
– 1 x RPCBDM-1000 display module.
– 1 x connection cable 2 m.
– 1 x mounting kit.
Order No.
UP
RPCBDM-1000
1 unit
BRM Power-Distribution Cable-Holder Clip Set
DOS20444
–Cable clips provide strain relief
for the feed lines of the network equipment.
–Cable clips are suitable for most IEC-C13 socket
plugs with a raised edge. (Must be checked for
suitability).
–Cable clips are sold in sets of 18 units.
Scope of delivery
– 1 x cable holder set (18 units).
How supplied
– In sets.
Note
– Optimal function only with cable connector
04.000.051.9.
– Can only be used with MPXBRM-EBBC6NxN
and MPXBRM-ERBC6NxN (x = 1 ,2, 3).
Order No.
UP
03.910.216.9
1 unit
Model
Order No.
UP
C20 plug in C19 socket
03.910.212.9 001
20 unit
Model
Order No.
UP
C14 plug in C13 socket
03.910.213.9 001
50 unit
395
SafetySleeve™ Cable Protection IEC C19
– SafetySleeves protect the feed lines of the
network equipment.
–They can be used on all C19 cables and fit onto
all PDUs.
DOS20493
Material / Finish
– PVC, black.
SafetySleeve™ Cable Protection IEC C13
– SafetySleeves protect the feed lines of the
network equipment.
–They can be used on all C13 cables and fit onto
all PDUs.
Material / Finish
– PVC, black.
DOS20494
230 | Rack PDUs
RPC2
RPC2 Communication Module for MPX, MPH2 and IMS
–For retrofitting to existing MPX , MPH and IMS
products.
–The communication card can be upgraded
during operation.
RPC2-KIT
Technical Data Interfaces
–R
J-45 LAN port (10/100 MBit) – for local
network (LAN) connection via an Ethernet
cable.
– E xpansion / administration port for local
configuration using a computer / laptop,
for creating a link-up of several PDUs
(MPX, MPH2 or IMS).
– S erial interface RS232.
– Display port for connecting the RPC BDM
(display module).
– External sensor port for connecting optional
sensors.
– Remote management: Onboard Web
interface, CLI, SNMPv1,2,3, SSH, Telnet Syslog,
compatible with Avocent ACS, UMG & MPU,
SiteScan, DSView, Rack Power Manager,
Nform & Trellis as well as Nagios or other
management software programs.
– Authentication: local, remote: Active
Directory, LDAP, TACACS, Radius, Kerberos.
– Encryption: MD5, AES, DES.
Order No.
UP
RPC2-KIT
1 unit
Rack PDUs | 231
MPH2™
MPH2™ – Managed Rack PDU
Monitoring and Control
The MPH2™ Managed Rack PDU is a power supply system with monitoring and control functions. The MPH2™
offers outstanding features such as easy rack-integration and management architecture as well as optimum
availability and energy efficiency.
Four MPH2™ versions are available:
Model/functions
MPHR
MPHM
MPHC
MPHB
Input / Group measurement
Output measurement
Output switching
Benefits of MPH2™
Monitors several parameters with defined thresholds
and alarm tools.
Monitors and controls individual outputs
and/or load and appliance groups.
A variety of measurements allow you to predict failing
conditions before they occur and proactively manage
connected equipment for maximum uptime.
Energy and power metering maximize the data center
power and cooling infrastructure.
Lowest power consumption of all switched-rack PDUs
lowers power costs and thermal load.
Up to four rack MPH2™ PDUs can be connected in a
Rack PDU Array™ thereby consolidating user-specific IP
connections and equipment monitoring.
MPH2™ savings for a typical data center
Typical rack PDU
with 24 outputs
MPH2™
Power consumption of PDU
(in Watt)
20
5
Annual energy consumption
of PDU (kWh)
176
44
Total proportion of the data center's energy consumption (kWh)*
333
83
Energy saving
75 %
Compared with a Switched Rack-PDU model
for a typical data center with a 1.9 PUE.
* according to Energy Logic calculations
Developed for critical environments
Industry-leading operating temperature of up to
60° C suitable for high temperatures inside racks.
Bistable relays ensure basic power supply even when
shortfalls occur elsewhere.
Accurate voltage and current metering up to outlet
level with ±1 % tolerances deliver reliable results.
Extensive alarm functions including notification when
an overload occurs in individual groups.
Monitoring of environment conditions
(temperature, humidity and input contacts) with
alerts and alarms.
Notification upon failure or if loads are removed in
individual racks.
kWh
333
75 % cost saving
83
Typical rack PDU
232 | Rack PDUs
MPH2TM
MPH2™
INPUT POWER
16 to 32 A (EU).
Single-phase and three-phase.
OUTPUT DISTRIBUTOR
IEC C13 and IEC C19.
Combination systems.
MODULARITY
Communication card.
External display.
External sensors.
MONITORING
Three various levels: Input level, group level,
output level
Temperature and humidity.
Door contacts and potential-free input contacts.
REMOTE CONTROLLED SOCKETS
Socket level.
MPH2™
MPH2™
Benefits
Highest availability levels
Modular communications card; can be replaced during
operation. This simplifies maintenance and increases
the level of availability.
Bistable relays in switchable designs; the server's power
supply is ensured even during outages.
Software-controlled overload protection – affected
outputs are switched off before the advance fuse is
activated.
Additional metering of the neutral conductor and of
the crest factor; possible faults that cause switch-off are
detected in advance.
Leading technology in many areas
Operating temperatures of up to 60 °C allow secure
operation in the warm aisle.
Metering accuracy of ± 1 % ensures reliable
measurement results.
Power losses of approx. 5 W, even in switchable models,
reducing electricity costs and minimizing the thermal
load.
234 | Rack PDUs
Industry-leading management properties
An integrated local display and an optional external
display facilitates flexible local management.
Onboard web interface and CLI/SSH interface; suitable
for both Windows and Linux administration.
A variety of authentication options and encrypted
protocols ensure integration into Enterprise Security
architectures.
SNMPv3 and IPv6 support so that current requirements,
particularly from the public sector, can be satisfied.
Simple integration into ENP solutions
Can be delivered pre-installed in Knürr racks to save
time and costs during installation in the data center.
Serial integration into Avocent UMG, ACS and MPU
guarantees redundant management access to the
MPH2.
Integration into ENP software solutions; the MPH2 is an
integral part of a comprehensive DCIM solution with
monitoring and control functions.
MPH2™
Colored clamps:
Colored labeling of supply.
Special tool-less Knürr DCM rack
fixture:
Lowers installation costs and extra space in
rack for cables and other components.
Communications module (RPC2™):
Offers extendable interfaces for network
communication, sensors and local display.
BDM™ local display module
Extended diagnostic functionality;
user-friendly display. Features include
detailed information about alerts and
specific labeling for outputs.
Connection cable with locking mechanism
Prevents IT cables from being accidentally
disconnected.
SN sensors:
Consolidates environmental monitoring of
temperature, humidity and potential-free input
contacts with the power supply at rack level.
Integrated display:
Provides easy access to important
information on the rack.
Ultra-flat circuit breakers:
Compact construction; minimizes
space requirements in the rack.
Flexible network cable input:
Simplifies installation in the rack PDU.
Cable and fixed wiring options:
Flexible power distribution; input-cable
can be connected locally.
Rack PDUs | 235
RPC2
Easy Integration into DCIM Systems
The rack PDUs MPH2™ and MPX™ as well as the in-line metering system MPXIMS™ can be managed both locally
and remotely.
Power data and sensor data are recorded
Conventional standardized protocols are used to ensure secure data transfer, management, and authentication.
As such, the products can be easily integrated into any existing network and any system architecture.
Flexible Local or Remote Management
Integrated standard displays on the DiStrip RM and
MPH2™ show all the key information required at the rack.
The optional local display BDM for the MPH2™ or MPX™
can be mounted in different locations depending on where
it can be read most easily.
Remote communication thanks to the modular hotswappable RPC2™ card ensures seamless expansion
options and easy servicing
S
upport for up to four PDUs within a single rack
PDU Array™: Minimizes the number of IP addresses
required.
S
upport for up to ten ambient sensors: Consolidates
power and environment monitoring at rack level.
S
upport for Web UI and CLI, with SSL and SSH:
Windows, Linux, and network administrators can use
their preferred form of communication with the rack
PDU.
S
upport for all conventional remote authentication
and encryption protocols: Products can be seamlessly
integrated into an existing security infrastructure.
S
upport for SNMP v1, v2, and v3: Allows for secure
communication via network management systems.
S
upport for IPv4 and IPv6: Future-proof IP support
for rack PDUs.
D
ata logging: All data is saved automatically, ensuring
easy troubleshooting without the need for additional
external management software.
236 | Rack PDUs
Power management with the following functions:
S
napshot of all electrical parameters at output, group,
phase, and general level.
S
napshot of the status and the measured values from
the ambient sensor.
T
hreshold configuration, alerts, and messages.
C
ontrol of individual outputs and groups.
S
tatus information and configuration of all outputs.
N
etwork management settings.
To enable central management of all rack PDUs within a
data center, the following software packages are available:
A
vocent Rack Power Manager, which includes access
and control functions to easily manage and monitor
your PDUs.
T
rellis Express, which provides a comprehensive view of
the devices in the data center.
L iebert Sitescan.
L iebert NFORM, which provides an overview of the
health status of relatively small to medium data centers.
Rack Power Manager boasts state-of-the-art monitoring
functions and allows intelligent server grouping over
multiple racks. You also benefit from customized reports
and scheduled standard reports, and have the option to
define thresholds for real-time alarms. As such, you obtain
high-quality information about the power supply
infrastructure of your data center, thereby allowing you to
make full use of the investment in PDUs.
RPC2
P
ower costs are measured and monitored.
H
istorical data is checked in capacity and consumption
reports.
The Trellis™ platform is a pioneering DCIM innovation
from Emerson Network Power. It not only reduces IT risks
but also increases operational efficiency, meaning it solves
current problems and prepares you for the future.
The real-time visualization, monitoring of the power
supply, and mobile access provided by the Trellis™
platform allow you to:
r educe inefficiencies without interrupting current
processes.
p
ostpone investments as you make better use of
existing resources, thereby improving the operating
profit.
i mprove Service Level Agreements with complete
transparency throughout the infrastructure.
g
ain a better insight into the data center and thus i
mprove overall efficiency.
Integration into the clear, easy-to-install Liebert NFORM
status monitoring software ensures the following:
R
ack PDUs are part of a consolidated monitoring
solution for data center infrastructure.
V
irtually any component in critical support equipment
can be monitored.
A
lerts and automatic actions in the event of a fault.
E vent management.
Integration into the scalable Liebert SiteScan® building
infrastructure management software ensures the
following:
R
ack PDUs are part of a consolidated monitoring
solution for data center infrastructure.
V
irtually any component in critical support equipment
can be monitored and controlled.
D
ata analysis and trend reports.
E vent management.
Make the Most of Your Rack PDU Investment
The rack PDUs MPX™, MPH2™, and MPXIMS™ can be fully integrated into the industry-leading KVM systems,
serial consoles, and infrastructure management systems from Emerson Network Power.
Integration into Avocent® Advanced Console Server,
MergePoint™ Unity KVM Switches and Universal
Management Gateway Appliances offers the following
advantages:
Rack PDUs are integrated into the out-of-band
management solution.
Rack PDUs become part of a consolidated
access and control solution.
The number of IP addresses required for
managing the rack PDUs is minimized.
DSView4 and rack PDUs together ensure:
Consolidated access to server control and the related access
control.
Easy assignment of IT equipment to the relevant rack PDU
outputs.
Integration into the management software
Avocent DSView™ 4, in which all data center
management functions are compiled on a
consolidated interface, allows for seamless
control of the data center for 24/7 operation.
The software provides secure, centralized out-ofband management of all connected IT and network
devices in complex and geographically dispersed data centers.
Rack PDUs | 237
MPH2™
MPH2™
– The MPH2 is a power distribution unit for
IT racks which provides metering of electrical
values. Depending on the model, individual
outputs can also be remote-controlled.
–The integrated RPC2 communications card
allows you to connect up to 4 MPH2 / MPX™
units as well as monitor and maintain all
connected units remotely. Up to 10 sensors
(temperature, air humidity, door contacts as
well as potential-free input contacts) can be
connected.
–The MPH2™ unit has an integrated display. In
addition, the optional external RPCBDM-1000
display module can easily be connected and
mounted on the rack.
–Special cables with locking mechanisms can be
connected to the outputs.
–Depending on the model, the connecting cable
for the MPH2 is attached to the housing (cable
length 3 m), also permitting a connecting cable
can be connected on site (model with connection unit).
MPH2™ Types
for Europe
Material / finish / color
– Closed housing, aluminum profile, finely
textured powder-coated top (RAL 7021),
Vampamid 6 0024 V0 (UL94) recyclable
plastic parts, finely textured and colored
(RAL 9005).
–Remote management: Onboard Web Interface,
CLI, SNMPv1,2,3, SSH, Telnet, integratable into
Avocent ACS, UMG & MPU, DSView, Rack Power
Manager, Nform & Trellis as well as Nagios or
other management software programs.
–Authentication: local, remote:
active directory, LDAP, TACACS, Radius, Kerberos. Encryption: MD5, AES, DES.
–Measurement parameters: Current (A), voltage
(V), real power (W), apparent power (VA),
consumption (kWh), power factor, frequency
and crest factor (only tapes M and R).
Accuracy: ±1 % (V, A).
Mechanical dimensions
– Vertical models:
Width x Depth x Length (mm):
56 x 50 x (see table).
– Horizontal models:
Width x Depth x Length (mm):
482,6 (440) x 250 x 44.
MPH2™ models
–M
PH2™ B – Metering per phase and per
group (only models with >16 A input power).
–M
PH2™ C – Metering per phase and per
group (only models with >16 A input power).
Each output can also be individually switched
remotely.
–M
PH2™ M – Metering per phase and per
group (only models with >16 A input power)
and per output.
–M
PH2™ R – Metering per phase and per
group (only models with >16 A input power)
and per output. Each output can also be
individually switched remotely.
Certification
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
Model/functions
Scope of delivery
– MPH2™ rack PDU.
– Standard mounting bracket.
– Safety instructions.
– Quickstart guide.
MPHR
MPHM
MPHC
MPHB
Input / Group measurement
Output measurement
Output switching
Vertical models
Type
Input Values
Voltage
Input Connector
Current
Outputs
Length
C13
C19
(mm)
2
916.5
B
230V
16A
C20 inlet
17
B
230V
16A
C20 inlet
21
B
230V
16A
C20 inlet
30
6
2
B
230V
16A
IEC 60309 16A 1P+N+G
17
B
230V
16A
IEC 60309 16A 1P+N+G
21
Order Number
MPHB3241
916.5
MPHB3141
1736.5
MPHB1241
916.5
MPHB3242
916.5
MPHB3142
B
230V
16A
IEC 60309 16A 1P+N+G
30
6
1736.5
MPHB1242
B
230V
32A
IEC 60309 32A 1P+N+G
30
6
1736.5
MPHB1243
B
230V
32A
Connection unit
30
6
1736.5
MPHB1260
B
230/400V
3 x 16A
IEC 60309 16A 3P+N+G
30
6
1736.5
MPHB1244
1826.5
MPHB1545
1826.5
MPHB1345
B
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
42
B
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
18
12
6
B
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
30
B
230/400V
3 x 32A
Connection unit
42
1826.5
MPHB1245
1826.5
MPHB1562
B
230/400V
3 x 32A
Connection unit
18
12
1826.5
MPHB1362
B
230/400V
3 x 32A
Connection unit
30
6
1826.5
MPHB1262
MPHC3341
C
230V
16A
C20 inlet
8
916.5
C
230V
16A
C20 inlet
16
1004
MPHC3141
C
230V
16A
C20 inlet
18
6
1736.5
MPHC1141
1736.5
MPHC1241
6
1736.5
MPHC1142
MPHC1242
C
230V
16A
C20 inlet
24
C
230V
16A
IEC 60309 16A 1P+N+G
18
C
230V
16A
IEC 60309 16A 1P+N+G
24
1736.5
C
230V
16A
IEC 60309 16A 1P+N+G
16
1004
MPHC3142
C
230V
32A
IEC 60309 32A 1P+N+G
18
1736.5
MPHC1143
238 | Rack PDUs
6
MPH2™
Type
Input Values
Voltage
Input Connector
Current
Outputs
C13
C
230V
32 A
IEC 60309 32 A 1P+N+G
24
C
230V
32 A
Connection unit
18
C
230V
32 A
Connection unit
24
C
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
18
C
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
24
C
230/400V
3 x 16 A
Connection unit
18
C
230/400V
3 x 16 A
Connection unit
24
C
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
18
Length
Order Number
C19
(mm)
1736.5
MPHC1243
6
1736.5
MPHC1160
1736.5
MPHC1260
6
1736.5
MPHC1144
1736.5
MPHC1244
6
1736.5
MPHC1161
1736.5
MPHC1261
6
1736.5
MPHC1145
1736.5
MPHC1245
1736.5
MPHC1345
C
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
24
C
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
6
12
6
C
230/400V
3 x 32 A
Connection unit
18
C
230/400V
3 x 32 A
Connection unit
24
C
230/400V
3 x 32 A
Connection unit
6
1736.5
MPHC1362
M
230V
16 A
C20 inlet
8
916.5
MPHM3341
MPHM3342
12
1736.5
MPHC1162
1736.5
MPHC1262
M
230V
16 A
IEC 60309 16 A 1P+N+G
8
916.5
M
230V
16 A
C20 inlet
16
1004
MPHM3141
M
230V
16 A
C20 inlet
18
6
1736.5
MPHM1141
1736.5
MPHM1241
6
1736.5
MPHM1142
MPHM1242
M
230V
16 A
C20 inlet
24
M
230V
16 A
IEC 60309 16 A 1P+N+G
18
M
230V
16 A
IEC 60309 16 A 1P+N+G
24
1736.5
M
230V
16 A
IEC 60309 16 A 1P+N+G
16
1004
MPHM3142
M
230V
32 A
IEC 60309 32 A 1P+N+G
18
6
1736.5
MPHM1143
1736.5
MPHM1243
6
1736.5
MPHM1160
1736.5
MPHM1260
6
1736.5
MPHM1144
1736.5
MPHM1244
6
1736.5
MPHM1161
1736.5
MPHM1261
6
1736.5
MPHM1145
1736.5
MPHM1245
1736.5
MPHM1345
M
230V
32 A
IEC 60309 32 A 1P+N+G
24
M
230V
32 A
Connection unit
18
M
230V
32 A
Connection unit
24
M
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
18
M
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
24
M
230/400V
3 x 16 A
Connection unit
18
M
230/400V
3 x 16 A
Connection unit
24
M
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
18
M
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
24
M
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
6
12
6
M
230/400V
3 x 32 A
Connection unit
18
M
230/400V
3 x 32 A
Connection unit
24
12
1736.5
MPHM1162
1736.5
MPHM1262
1736.5
MPHM1362
M
230/400V
3 x 32 A
Connection unit
6
R
230V
16 A
C20 inlet
8
916.5
MPHR3341
R
230V
16 A
IEC 60309 16 A 1P+N+G
8
916.5
MPHR3342
R
230V
16 A
C20 inlet
16
R
230V
16 A
C20 inlet
18
R
230V
16 A
C20 inlet
24
R
230V
16 A
IEC 60309 16 A 1P+N+G
18
R
230V
16 A
IEC 60309 16 A 1P+N+G
R
230V
16 A
R
230V
R
R
1004
MPHR3141
1736.5
MPHR1141
1736.5
MPHR1241
1736.5
MPHR1142
24
1736.5
MPHR1242
IEC 60309 16 A 1P+N+G
16
1004
MPHR3142
32 A
IEC 60309 32 A 1P+N+G
18
1736.5
MPHR1143
230V
32 A
IEC 60309 32 A 1P+N+G
24
230V
32 A
Connection unit
18
R
230V
32 A
Connection unit
24
R
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
18
R
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
24
R
230/400V
3 x 16 A
Connection unit
18
6
6
6
1736.5
MPHR1243
6
1736.5
MPHR1160
1736.5
MPHR1260
6
1736.5
MPHR1144
6
1736.5
MPHR1244
1736.5
MPHR1161
1736.5
MPHR1261
1736.5
MPHR1145
1736.5
MPHR1245
R
230/400V
3 x 16 A
Connection unit
24
R
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
18
R
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
24
R
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
6
12
1736.5
MPHR1345
R
230/400V
3 x 32 A
Connection unit
18
6
1736.5
MPHR1162
1736.5
MPHR1262
12
1736.5
MPHR1362
R
230/400V
3 x 32 A
Connection unit
24
R
230/400V
3 x 32 A
Connection unit
6
6
Rack PDUs | 239
Emerson Network Power Rack PDUs
Hotizontal models
Type
Input Values
Voltage
Input Connector
Current
Outputs
C13
B
230V
16 A
C20 inlet
12
B
230V
16 A
C20 inlet
8
B
230V
32 A
IEC 60309 32A 1P+N+G
12
B
230V
32 A
IEC 60309 32A 1P+N+G
8
Order Number
C19
MPHB2141
2
MPHB2341
2
MPHB2343
MPHB2244
MPHB2143
B
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
12
B
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
2
6
B
230/400V
3 x 32 A
IEC 60309 32A 3P+N+G
2
6
M
230V
16 A
C20 inlet
9
M
230V
16 A
C20 inlet
6
M
230V
32 A
IEC 60309 32A 1P+N+G
9
M
230V
32 A
IEC 60309 32A 1P+N+G
6
M
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
9
MPHB2144
MPHB2245
MPHM2141
2
MPHM2441
MPHM2143
2
MPHM2443
MPHM2144
M
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
2
6
MPHM2344
M
230/400V
3 x 32 A
IEC 60309 32A 3P+N+G
2
6
MPHM2345
2
MPHR2441
2
MPHR2443
R
230V
16 A
C20 inlet
9
R
230V
16 A
C20 inlet
6
R
230V
32 A
IEC 60309 32A 1P+N+G
9
R
230V
32 A
IEC 60309 32A 1P+N+G
6
MPHR2141
MPHR2143
R
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
9
R
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
2
6
MPHR2344
R
230/400V
3 x 32 A
IEC 60309 32A 3P+N+G
2
6
MPHR2345
240 | Rack PDUs
MPHR2144
MPH2™
MPX™/MPH™/MPH2™/IMS™ – Sensors
DOS20153
–These sensors are designed for tool-less
installation in a Knürr Miracle / DCM rack, but
is also compatible with all other rack types.
–"Fixed" type sensors are attached to a cable.
–"Modular" type sensors can be connected to the
delivered cable.
–Plugged into the RPC-1000 or RPC2
communication card.
–Several sensors can be connected in rows.
–Automatically displayed in the MPX/MPH/
MPH2/IMS software.
–Temperature measurement range: 5 – 55° C.
–Accuracy: ± 0.5° C.
–Humidity measurement range: 10 – 95 %.
–Accuracy: ± 3.5 %.
Note
The sensors are not required for operating
the MPX or MPH, MPH2, IMS. However, a
communication card is needed.
Scope of delivery
– 1 x sensor with connection cable.
– 1 x instruction manual.
Cable length Type
Model
Order No.
UP
3660
Fixed
Temperature sensor, single
SN-Z01
1 unit
5180
Fixed
Temperature sensor, triple
SN-Z02
1 unit
5180
Fixed
Temperature sensor, triple + humidity sensor, single
SN-Z03
1 unit
2000
Modular
Temperature sensor, single
SN-T
1 unit
2000
Modular
Temperature sensor, single + humidity sensor, single
SN-TH
1 unit
2000
Modular
2 x door contact - input module*
SN-2D
1 unit
2000
Modular
3 x digital input
SN-3C
1 unit
* Suitable door contact switch: Order no.: 06.108.115.9
Liebert RPC BDM - 1000 Display Module
DOS20153
–Provides the local display of the monitored
data for all connected MPX/MPH/MPH2/IMS
systems.
–Operated with a navigation switch.
–Connected via a cable with the RPC, enabling
the user to place the displays where needed in
the given local space conditions.
–An individual display can be used for up to
four MPX/MPH/MPH2/IMS PDUs, which are all
connected in a PDU array.
Note
The display module is not required for operating
the MPX or MPH, MPH2, IMS. However, a
communication card is needed.
Scope of delivery
– 1 x RPCBDM-1000 display module.
– 1 x connection cable 2 m.
– 1 x mounting kit.
Order No.
UP
RPCBDM-1000
1 unit
Rack PDUs | 241
MPH2™
SafetyLock™ Connection Cable IEC C13 EU
– Connection cables have
integrated protection against
accidental disconnection.
–For straight locking from C14 to C13.
–Locking cables are sold in sets of 9 units.
Certification
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
DOS20495
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/10 A.
– Operating temperature: -25° C ~ +70° C.
– E xtraction force with locking function:
up to 120 N.
– Electric power cable: H05VV-F 3G 1.0 mm2.
– F lame retardance: Plug: UL 94V-2 or
better; cable: UL VW-1, IEC60332-1. Cat F2.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 9 x locking cables.
How supplied
– In sets.
DOS20496
L
Model
Order No.
UP
0.5 m
Black
03.951.450.0,001
9 unit
1.0 m
Black
03.951.450.0,002
9 unit
1.5 m
Black
03.951.450.0,003
9 unit
0.5 m
White
03.951.451.0,001
9 unit
1.0 m
White
03.951.451.0,002
9 unit
1.5 m
White
03.951.451.0,003
9 unit
DOS20497
SafetyLock™ Connection Cable IEC C19 EU
– Connection cables have
integrated protection against
accidental disconnection.
– For straight locking from C20 to C19.
–Locking cables are sold in sets of 6 units.
Approvals
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
DOS20498
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/16 A.
– Operating temperature: -25° C ~ +70° C.
– E xtraction force with locking function:
up to 120 N.
– Electric power cable: H05VV-F 3G 1.5 mm2.
– F lame retardance: Plug: UL 94V-2 or
better; cable: UL VW-1, IEC60332-1. Cat F2.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 6 x locking cables.
How supplied
– In sets.
DOS20499
DOS20500
242 | Rack PDUs
L
Model
Order No.
UP
0.5 m
Black
03.951.455.0,001
6 unit
1.0 m
Black
03.951.455.0,002
6 unit
1.5 m
Black
03.951.455.0,003
6 unit
0.5 m
White
03.951.456.0,001
6 unit
1.0 m
White
03.951.456.0,002
6 unit
1.5 m
White
03.951.456.0,003
6 unit
MPH2™
SpeedMountKit MPH2, MPE
–Installation of the rack PDUs MPH2 and MPE
without tools in Knürr DCM and InstaRack racks.
DSC00236
Rack type
Rack height
Order No.
UP
DCM
H2000
039514050001
1 unit
DCM
H2200
039514050003
1 unit
InstaRack
H2000
039514050002
1 unit
InstaRack
H2200
039514050004
1 unit
Design/Color
Order No.
UP
Blue
03.951.476.0.001
20 unit
Red
03.951.476.0.002
20 unit
Yellow
03.951.476.0.003
20 unit
Green
03.951.476.0.004
20 unit
Orange
03.951.476.0.005
20 unit
MPH2 / MPE – Color Coding
– Option for color coding power supply A or B.
–Option for color coding the individual phases /
groups.
– Installation without tools on MPH2 and MPE.
MPH2 / MPE – Color Coding
Rack PDUs | 243
MPE
MPE – Rack PDU
Reliable power distribution for data centers
The MPE Rack PDU is a power distribution unit for data center applications. It provides all the necessary functions
of a rack-based power distribution unit and guarantees reliable power distribution. A broad range of IT devices
and other sensitive electrical loads can be connected to it.
The MPE offers you the highest level of availability for
your critical loads.
I ts high operating temperature of up to 60°C makes it
suitable for installation in hot aisles (area at the back of
the rack).
2
0 A overload switch for many 32 A models that prevents the overload switch from triggering prematurely
at high temperatures and during start-up peaks.
Output cable with disconnection protection to prevent the IEC60320 connection cable from being unintentionally disconnected.
Stable aluminum housing supports the mechanical
stability of the housing.
Extra-large wire cross-sectional area of the input cable;
in three-phase models, this makes it possible to subject
the neutral wire to greater loads in the event that the
loads are unbalanced.
244 | Rack PDUs
Simple physical and electrical installation helps to keep
costs down.
E merson Network Power supplies the PDUs preinstalled in racks which saves extra work on-site.
F lexible cable entry facilitates installation in the rack.
V
ery low unit profile – even in the overload switch area
– leaves maximum installation space for other components as well as more space for air supply in the rack.
M
odels with fixed connection facilitate customer-side
connection of the input cable for special requirements.
" SpeedMount" function for installation in Knürr DCM /
InstaRack saves time and money in on-site installation.
G
reat model variety with power supply from up to
three-phase 32 A and a number of different outputs –
including country-specific with Schuko plug, UK or Switzerland.
MPE
INPUT POWER
16 to 63A (EU).
Single-phase and three-phase.
OUTPUT DISTRIBUTOR
IEC-C13 and IEC-C19, Schuko, UK.
Combination systems.
MODULARITY
Input cable.
Rack PDUs | 245
MPE
MPE – Rack PDU
– The MPE Rack PDU is a power distribution
unit for data center applications. It provides
all the necessary functions of a rack-based
power distribution unit and guarantees reliable
power distribution. A broad range of IT devices
and other sensitive electrical loads can be
connected to it.
–Special cables with a locking function can be
connected to the outputs.
–Depending on the model, the connecting cable
of the MPH2 is securely attached to the housing
(length of input lead: 3 m) or a connection cable
can be connected directly on site (models with
connection block).
–The PDU can be installed without any tools in
ENP Knürr racks or other housing systems with
the corresponding mountings.
–For 32 A models, the individual groups are
protected by a 20 A circuit breaker (hydraulic,
magnetic).
–The maximum operating temperature is 60°C
(not for MPE-3345-002, this type has 6 x 16A
miniature circuit breaker).
MPE1345
Input values
Input plug
Voltage
Current
100-240 V
16 A
100-240 V
16A
230 V
C19
C20 inlet
18
3
C20 inlet
24
16 A
IEC 60309 16A 1P+N+G
18
230 V
16 A
IEC 60309 16A 1P+N+G
24
230 V
32A
IEC 60309 32 A 1P+N+G
36
6
24
6
230 V
32A
IEC 60309 32 A 1P+N+G
32A
IEC 60309 32 A 1P+N+G
230 V
32A
Hardwired
36
6
24
6
230 V
32A
Hardwired
230 V
32A
Hardwired
230/400 V
3 x 16 A
IEC 60309 16 A 3P+N+G
36
12
230/400 V
3 x 16 A
IEC 60309 16 A 3P+N+G
36
6
230/400 V
3 x 16 A
IEC 60309 16 A 3P+N+G
230/400 V
3 x 16 A
Hardwired
36
12
36
6
3 x 16 A
Hardwired
3 x 16 A
Hardwired
Standards
– CE conformity: LVD, including the applicable
harmonized standards.
– CB certification: IEC 60950-1 (2nd Ed.).
– BV-BG certification (factory inspected).
Lengths
Schuko
3
230 V
230/400 V
Mechanical dimensions
– Width x depth x length (mm)
56 x 50 x (see table).
Outputs
C13
230/400 V
Material / Surface / Color
– Closed housing, aluminum profile, upper
section powder-coated in RAL 7021 fine
structure, plastic parts Vampamid 60024 V0
(UL94) recyclable, dyed fine structure RAL
9005.
Order No.
(mm)
826,5
MPE-3141
826,5
MPE-3241
826,5
MPE-3142
826,5
MPE-3242
1736,5
MPE-1243
3
1736,5
MPE-1543
18
1736,5
MPE-1643
1736,5
MPE-1260
3
1736,5
MPE-1560
18
1736,5
MPE-1660
1736,5
MPE-1144
3
1736,5
MPE-1444
18
1736,5
MPE-1644
1736,5
MPE-1161
3
1736,5
MPE-1461
18
1736,5
MPE-1661
230/400V
3x32A
IEC 60309 32A 3P+N+G
6
826,5
MPE-3345-002
230/400 V
3 x 32 A
IEC 60309 32A 3P+N+G
36
6
1736,5
MPE-1245
230/400 V
3 x 32 A
IEC 60309 32A 3P+N+G
24
12
230/400 V
3 x 32 A
IEC 60309 32A 3P+N+G
24
6
230/400 V
3 x 32 A
IEC 60309 32A 3P+N+G
230/400 V
3 x 32 A
IEC 60309 32A 3P+N+G
48
230/400 V
3 x 32 A
Hardwired
36
6
230/400 V
3 x 32 A
Hardwired
24
12
230/400 V
3 x 32 A
Hardwired
24
6
230/400 V
3 x 32 A
Hardwired
230/400 V
3 x 32 A
Hardwired
246 | Rack PDUs
1736,5
MPE-1345
3
1736,5
MPE-1545
18
1736,5
MPE-1645
3
18
48
1736,5
MPE-1745
1736,5
MPE-1262
1736,5
MPE-1362
1736,5
MPE-1562
1736,5
MPE-1662
1736,5
MPE-1762
MPE
SafetyLock™ Connection Cable IEC C13 EU
– Connection cables have
integrated protection against
accidental disconnection.
–For straight locking from C14 to C13.
–Locking cables are sold in sets of 9 units.
Certification
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
DOS20495
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/10 A.
– Operating temperature: -25° C ~ +70° C.
– E xtraction force with locking function:
up to 120 N.
– Electric power cable: H05VV-F 3G 1.0 mm2.
– F lame retardance: Plug: UL 94V-2 or
better; cable: UL VW-1, IEC60332-1. Cat F2.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 9 x locking cables.
How supplied
– In sets.
DOS20496
L
Model
Order No.
UP
0.5 m
Black
03.951.450.0,001
9 unit
1.0 m
Black
03.951.450.0,002
9 unit
1.5 m
Black
03.951.450.0,003
9 unit
0.5 m
White
03.951.451.0,001
9 unit
1.0 m
White
03.951.451.0,002
9 unit
1.5 m
White
03.951.451.0,003
9 unit
DOS20497
SafetyLock™ Connection Cable IEC C19 EU
– Connection cables have
integrated protection against
accidental disconnection.
– For straight locking from C20 to C19.
–Locking cables are sold in sets of 6 units.
Approvals
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
DOS20498
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/16 A.
– Operating temperature: -25° C ~ +70° C.
– E xtraction force with locking function:
up to 120 N.
– Electric power cable: H05VV-F 3G 1.5 mm2.
– F lame retardance: Plug: UL 94V-2 or
better; cable: UL VW-1, IEC60332-1. Cat F2.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 6 x locking cables.
How supplied
– In sets.
DOS20499
L
Model
Order No.
UP
0.5 m
Black
03.951.455.0,001
6 unit
1.0 m
Black
03.951.455.0,002
6 unit
1.5 m
Black
03.951.455.0,003
6 unit
0.5 m
White
03.951.456.0,001
6 unit
1.0 m
White
03.951.456.0,002
6 unit
1.5 m
White
03.951.456.0,003
6 unit
DOS20500
Rack PDUs | 247
DI-STRIP®
DI-STRIP® – Basic Rack-PDU
Robust PDUs with useful equipment features
Features
Closed sheet-steel extrusions and
ideal integration into Knürr rack
systems deliver high stability and
torsional strength.
Best possible conductivity: Fulllength brass busbar provided with
many models.
Double spring contacts for reliable
and low contact resistance.
248 | Rack PDUs
The DI-STRIP product family meets a broad range of data center power
distribution requirements for IT applications, computer networking,
laboratories and home sector.
Specially configured for the growing number of electronic components in
network switching racks or server racks. Available with different accessories,
such as circuit breakers, overvoltage protection, mains filter, master-slave
function, emergency stop switch, fault-current circuit-breaker, local and remote
power metering.
DI-STRIP®
INPUT POWER
Single-phase or three-phase.
Up to 22 kVA.
Simple input supply.
OUTPUT DISTRIBUTOR
NEMA 5-20R single-phase, IEC C13 and C19,
combination systems.
Schuko, France, Switzerland.
MODULARITY
More connectivity with expansion unit for
Basic Rack PDU GST18.
FORM FACTOR
Vertical mounting (0 U).
Rack installation.
Workstation mounting.
LOCAL MONITORING
Fixed display.
REMOTE MONITORING
Secure Web and SNMP interfaces
with Liebert Nform.
OVERLOAD PROTECTION
Circuit breakers/fuses per branching
cable/output as required.
Rack PDUs | 249
DI-STRIP®
Benefits
Optimal phase distribution
across the entire rack with
color-coded identification
of the individual phases.
Up to 48 different plug options
per PDU: shortens the cable
distance between the PDU and
the consumer.
One of the most compact PDUs
on the market: measures only
44.4 x 45.5 mm, which saves space
even on a 600 mm-wide rack.
Simple and quick installation
on the rack extrusion: reduces
installation and wiring costs.
250 | Rack PDUs
Emerson Network Power Rack
DI-STRIP
PDUs®
Highest possible security and availability with:
Closed sheet-steel extrusions that deliver high stability
and torsional flexibility.
Extensive certification compliant with the international
Standard.
Double spring contacts for reliable and low contact
resistance.
Unbalanced load monitoring prevents feed-cable overload of 3-phase feed (only DI-STRIP versions M and RM).
Optimal load monitoring for server installation
(only DI-STRIP versions M and RM).
Individual output-backup with DI-STRIP BladePower
and Pizza Power.
Reliable power distribution at full power delivered by full-length brass busbars.
A
Maximum flexibility attained due to:
Internationally compatible configurations and options.
Power cable lengths of 2.5 m or 4 m for more spatial
flexibility.
Rotating current indicator in 90° steps
(only M and RM DI-STRIP versions).
Tool-less installation, which means quick and easy
extension in the rack (only with DI-STRIP HighPower).
Extremely low operating costs:
Installation in the rack is rapid and easy requiring
minimal space and reduced installation time.
Automatic background-light reduction reduces the rack
PDU power loss (only with M and RM DI-STRIP versions).
Especially flat housing extrusion, providing full accessibility to the 19" level on 600 mm wide server racks.
B
C
Can be fitted to a rack or workstation.
Highly compact construction; minimizes space requirements in the rack.
Color-coded phase allocation (L1, L2, L3).
Rack PDUs | 251
DI-STRIP®
DI-STRIP®
European Equipment Models
DI-STRIP models
Functions
Input power
Outputs
Technical description
Euro socket system IEC 320
Basic power distribution
1 x 16 A
3.68 kVA
IEC60320
C13 & C19
Page 230
TriplePower
Basic power distribution
3 x 16 A
11 kVA
IEC60320
C13 & C19 & Schuko
Page 230
Classic
Basicpower distribution/extra
large distance between the sockets
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 232
Compact
Basic power distribution
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 232
Protector FI
Fault-current circuit-breaker
FI
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 233
Protector LS
Circuit breaker (LS)
FI
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 233
Protector FI/LS
Combination FI + LS
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 234
Protector Emergency Stop
Emergency stop switch
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 234
Protector Emergency Stop FI/LS
Combination emergency stop + FI + LS
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 235
Power Cleaner
Mains filter
1 x 16 A
3.68 kVA
Schuko, France
Page 235
Safety Basic
Overvoltage protection
1 x 16 A
3.68 kVA
Safety Standard
Mains filter + overvoltage protection
1 x 16 A
3.68 kVA
Schuko, France, Switzerland
Page 237
Master Slave
Master Slave
1 x 16 A
3.68 kVA
Schuko, France
Page 238
Combi
Combination Master Slave +
overvoltage protection + mains filter
1 x 16 A
3.68 kVA
Schuko, France
Page 238
M (metered)
Phase current metered reading, local
1 x 16 A, 1 x 32 A, 3 x 16 A
3.32 A to 22 kVA
IEC60320
C13 & C19 & Schuko
Page 239
RM (remote metered)
Phase current metered reading local +
remote
1 x 16 A, 1 x 32 A, 3 x 16 A
3.32 A to 22 kVA
IEC60320
C13 & C19 & Schuko
Page 239
252 | Rack PDUs
Schuko, France, Switzerland
Page 236
DI-STRIP®
DI-STRIP® Euro Socket System, IEC 320
DOS00458
– Optionally with illuminated switch; 2-pole
switching.
– 19" installation option.
–Euro socket combinations of IEC 320 C13 and
C19 sockets.
– Feed cable: H05VV-F 3G 1.5/2.5 mm2.
– Feed cable: 2.5 m / 5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
– CSA (only models with IEC60320 input).
Color
– Enclosure: RAL 7035, light-gray.
– Plastic parts: RAL 7021 dark-gray.
DOS00460
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
DOS20062
Dimensions
–H
eight: 45.5 mm.
–W
idth of housing: 44.4 mm (= 1 U).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
DOS20102
DI-STRIP® TriplePower® Euro Socket System
– Feed cable: H05VV-F 5 G 2.5 mm2.
–Feed cable: 2.5 m (optional with IEC60309 plug,
3Ph/N/PE 6h).
– Easy mounting on the rack extrusion.
– Standard feed 3 x 16 A.
–Ideal for implementing redundancy
(e.g. 96 A with redundant feed).
– Color-coded phase allocation.
– Optimum distribution across the entire
rack height (23 U and 41 U).
– Alternative to 3-phase GST18 system.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
– IEC 320.
Color
– Enclosure: RAL 7035, light-gray.
– Plastic parts: RAL 7021 dark-gray.
DOS20126
Material/ Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
Load rating
– 100-240/173-415 Vac.
– Input: 3 x 16 A.
– Output: 10 A (C13).
– Output: 16 A (C19 / Schuko).
Dimensions
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Rack PDUs | 253
DI-STRIP®
Knürr DI-STRIP® Classic
– Optionally with illuminated switch; 2-pole
switching.
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
–Optionally with Euro plug, IEC320 for UPS
application.
DOS00403
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94).
– I nternal conductor: full-length busbars, brass.
Dimensions
–D
istance between sockets: 100 mm.
–H
eight: 45.5 mm.
–W
idth of housing: 44.4 mm (= 1 U).
– F eed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
– VDE GS.
Color
– RAL 7035, light-gray.
Load rating
– 100-240 Vac/16 A (output Schuko and UTE).
– 100-240 Vac/10A (outputs Switzerland).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Knürr DI-STRIP® Compact
DOS00401
with switch.
– Optionally with illuminated switch; 2-pole
switching.
– 19" installation option (for length 483 mm).
–2 versions: standard side panel or design side
panel.
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
–Optionally with Euro plug, IEC320 for UPS
applications.
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
254 | Rack PDUs
Dimensions
–D
istance between sockets: 50 mm.
–H
eight: 45.5 mm.
–W
idth of housing: 44.4 mm (= 1 U).
– F eed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
– VDE GS.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Load rating
– 100-240 Vac/16 A (output Schuko and UTE).
– 100-240 Vac/10 A (outputs Switzerland).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
DI-STRIP®
Knürr DI-STRIP® Protector FI
DOS20065
with FI circuit breaker
Protector FI
– F ault-current circuit breaker for user
protection.
–P
rotection against indirect contact by
disconnection of the circuit when inadmissibly
high contact voltage occurs through bodily
contact with electrical equipment.
–A
dditional protection against direct contact.
–R
esidual operating current Ig = 10 mA for
alternating and pulsating direct fault currents.
–1
9" installation option (for length 483 mm).
– S ocket rotation: 45°.
– F eed cable: H05VV-F 3G 1.5 mm2.
–M
olded right angle plug.
Material/ Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 78 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light gray.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Knürr DI-STRIP® Protector LS
DOS00692
with circuit breaker.
Protector LS
– Circuit breaker for overload and short circuit.
–P
rotects cables and lines by switching off
rapidly in the event of a short circuit and
defined delayed switch-off when overloads
occur.
– Circuit breaker: 16 A.
– Trip characteristics: type B, 2-pole.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
– VDE GS.
Material/ Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Load rating
– 100–240 Vac/16 A.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light gray.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Dimensions
– Distance between sockets: 50 mm.
– Height: 78 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Rack PDUs | 255
DI-STRIP®
Knürr DI-STRIP® Protector FI / LS
DOS00693
Protector FI / LS
– Fault current switch and circuit breaker.
–P
rovides a combination of user, overload and
short circuit protection.
–R
esidual operating current Ig = 30 mA for
alternating and pulsating direct fault currents.
–C
ircuit breaker 16 A (Schuko and France) /
10A (Switzerland).
– Trip characteristics, type B, 2-pole.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 78 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Load rating
– 100–240 Vac/16 A (Schuko and France).
– 100–240 Vac/10 A (Switzerland).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Knürr DI-STRIP® Protector Emergency Stop
DOS20059
– With 2-pole emergency stop switch for
user protection.
–For manually disconnecting consumers in
an emergency.
–Phase and neutral conductors are separated
safely.
–Switch must be intentionally unlocked to
restart.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
M
aterial / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
–D
istance between sockets: Classic: 100 mm,
Compact: 50 mm.
– Height: 101 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
256 | Rack PDUs
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combinations
– Final digit of order number .1:
RAL 7035, light gray.
– Plastic parts: RAL 7035, light gray.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
DI-STRIP®
Knürr DI-STRIP® Protector Emergency Stop FI /LS
DOS00456
– With 2-pole emergency stop switch
for user protection.
– For protecting operating personnel.
–For manually disconnecting consumers in
an emergency.
–Phase and neutral conductors are separated
safely.
–Switch must be intentionally unlocked to
restart.
–Socket rotation: 45°.
–Feed cable: H05VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material/ Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–p
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
–D
istance between sockets: Compact: 50 mm.
–H
eight: 101 mm.
–W
idth of housing: 44.4 mm (= 1 U)
– F eed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combinations
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Additionally:
– With 2-pole fault-current switch and circuit
breaker
– Provides a combination of user, overload and
short circuit protection.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Knürr DI-STRIP® Power Cleaner
DOS20061
–High-frequency glitches generally occur
in switching processes ranging from 100 kHz to
5 MHz. This high-frequency rate overloads the
mains frequency and affects adjacent electronic
equipment. The mains filter attenuates this
high-frequency rate.
–The attenuation behavior is harmonized with
the typical interference spectrum.
–The mains filter works in both directions: where
glitches from the equipment to the socket strip
are also filtered from the mains.
–19" installation option (for length 483 mm).
–Socket rotation: 45°.
–Feed cable: H05VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Technical data
– Nominal voltage: max. 250 Vac, 50 Hz.
– Nominal current, max. 16 A.
– Filter compliant with VDE 0565-3
(EN 60939-1).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
– 2 x 19" mounting brackets (additionally with
19" installation option).
Rack PDUs | 257
DI-STRIP®
Knürr DI-STRIP® Safety Basic
DOS20068
with overvoltage protection
–For protection against transient overvoltage
from the mains, which, for example, are caused
by switching machines on and off.
–When critical overvoltages occur, the connection to the mains is cut off.
–Once the protective conductor has been triggered, the green function display light is not
illuminated. Thus, the socket strip can no longer
be used.*
–Basic equipment protection is classified as class
3 (category D).
–For optimal protection, class 1 and 2 (categories
B and C) protective equipment must be installed in the building.
–19" installation option (for length 483 mm).
–Socket rotation: 45°.
–Feed cable: H05VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–p
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
–D
istance between sockets: 50 mm.
–H
eight: 45.5 mm.
–W
idth of housing: 44.4 mm (= 1 U).
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Technical data
– Appliance class: Type 3 as per DIN EN 61643-11.
– Requirement class: category D as per VDE
0675-6.
– Mains voltage: 230 VAC.
– Nominal current, max. 16 A.
– Discharge surge current (8/20 μs): 10 kA.
– Reaction time: ‹ 25 ns.
– Safety level (at 100 A varistor peak current):
L with respect to N: ‹ 800 V, L / N with respect to
PE: ‹ 1500 V.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
* Send the socket strip to the manufacturer for the protective conductor to be replaced!
258 | Rack PDUs
DI-STRIP®
Knürr DI-STRIP® Safety Standard
DOS20069
– Standard safety models consist of a combined
overvoltage protection/mains filter element.
–Protects against transient overvoltages from
the mains, which, for example, are caused by
switching machines on and off.
–When critical overvoltages occur, connection to
the mains is cut off.
–Once the protective conductor has been
triggered, the green function display light is not
illuminated. The socket strip can thus no longer
be used.*
–Basic equipment protection is classified as class
3 (category D).
–For optimal protection, class 1 and 2 (categories
B and C) protective equipment must be
installed in the building.
–High-frequency glitches are generally caused
by switching processes in an operation from
100 kHz to 5MHz.
–This high-frequency rate overloads the mains
frequency and affects adjacent electronic
equipment. The mains filter attenuates this
high-frequency rate.
–The attenuation behavior is harmonized with
the typical interference spectrum.
–19" installation option (for length 483 mm).
–Socket rotation: 45°.
–Feed cable: HO5VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material/ Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Technical data
– Mains voltage: 230 VAC.
– Nominal current: max. 16 A / 10 A.
– Discharge surge current (8/20 μs): 10 kA.
– Reaction time: ‹ 25 ns.
– Safety level (at100 A varistor peak current):
L with respect to N: ‹ 800 V, L / N with respect
to PE: ‹ 1500 V.
– Overvoltage protection
– Appliance class: Class 3 – as per
DIN EN 61643-11.
– Requirement class: Category D as per
VDE 0675-6.
– Mains filter: as per VDE 0565 (EN 60939).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
* Send the socket strip to the manufacturer for the safety arrester to be replaced!
Rack PDUs | 259
DI-STRIP®
Knürr DI-STRIP® Master-Slave
–Slave plugs will switch on if master switches on.
–Note:
–T
he master consumer's power intake must
always exceed the switch-on threshold. When
switching off the master consumer, the power
intake must fall below the switch-off threshold.
–1
9" installation option (for length 483 mm).
– S ocket rotation: 45°.
– F eed cable: H05VV-F 3G 1.5 mm2.
–M
olded right angle plug.
DOS20070
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
–D
istance between sockets: 50 mm.
–H
eight: 45.5 mm.
–W
idth of housing: 44.4 mm (= 1 U).
– F eed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
– CB scheme.
– VDE GS.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Load rating
– Max. 250 Vac/16 A.
Technical data
– Switching-threshold setting range
– On: 20 - 200 mA (approx. 55 mA on delivery).
– Off: 16 - 160 mA (approx. 44 mA on delivery).
– Switching delay: 550 ms, ± 20 %.
– Electronic module: 2-pole switching.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Knürr DI-STRIP® Combi
DOS00325
with master-slave overvoltage protection
and mains filter.
–Master-slave with overvoltage protection and
mains filter.
– Automatic consumer switching.
–Combines Master-Slave and Safety Standard
(page 260) functions.
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material / Finish
–H
ousing: closed sheet steel extrusion,
zinc-passivated, powder-coated texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– I nternal conductor: full-length busbars, brass.
Dimensions
–D
istance between sockets: 50 mm.
–H
eight: 45.5 mm.
–W
idth of housing: 44.4 mm (= 1 U).
– F eed cable: 2.5 m.
Approvals/certificates
–C
E label in accordance with
Low Voltage Directive 2006/95/EC.
– E MC Directive 2004/108/EC.
– BV BG.
–C
B scheme.
260 | Rack PDUs
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Technical data
– With overvoltage protection and mains filter.
– Mains voltage: max. 250 VAC.
– Nominal current: 16 A.
– Requirement class: D (protection as per
VDE 0675).
– Surge current resistance (8/20 μs wave):
Max. 10 kA.
– Protection level (1.5/50 μs wave):
‹ 1500 V (L + N against PE).
– Master-slave function:
– Switching-threshold setting range
– On: 20 - 200 mA (approx. 55 mA on
delivery).
– Off: 16 - 160 mA (approx. 44 mA on
delivery).
– Switching delay: 550 ms ± 20 %.
– Electronic module: 2-pole switching.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
DI-STRIP®
Knürr DI-STRIP® M
DOS80002
– Large LCD display for clear view.
–Effective metering of alternating current
displayed per phase (single-phase or 3-phase,
depending on model).
–LCD display rotation in 90° steps.
–Display contrast can be adjusted.
–Unbalanced-load warning display with 3-phase
model.
–Signals indicate load changes.
–Automatic reduction of background light.
–Feed cable: 4 m H05VV—F 5 G 4 mm2
(PizzaPower M).
–Feed cable: 2.5 m H05VV-F 5 G 2.5 mm2
(TriplePower M).
–Feed cable: 2.5 m H05VV-F 3G 1.5 mm2
(DI-STRIP Compact M, DI-STRIP IEC320 M).
Material/ Finish
– PizzaPower® model; Housing: sheet steel,
zinc-passivated, powder-coated.
– Other models: Housing: closed sheet steel
extrusion, zinc-passivated, powder-coated
texture.
–P
lastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
EN61326-1, EN61000-3-2, EN61000-3-3.
– FCC Class B.
– CB scheme (TriplePower M, DI-STRIP compact
M, IEC320M, ampere meter GST18i).
Color
– PizzaPower M model; Housing:
RAL 9005 black.
– Other models; Housing:
RAL 7035 light-gray.
– Plastic parts: RAL 7021 dark-gray.
Scope of delivery
– 1 x socket strip with ampere meter.
– 2 x mounting brackets.
– 2 x 19" mounting brackets (with 19"
installation option).
Note
Other models (e.g C 19 outputs)
available on request.
Knürr DI-STRIP® RM
DOS80002
–Displays real RMS value for the
alternating current per phase.
–LCD display rotation in 90° steps.
–Display bright/dark switchover.
–Warning display for unbalanced load.
–Signals indicate load changes.
–Automatic darkening of background light
for energy saving.
Material / Finish
– PizzaPower model; Housing: sheet steel,
zinc-passivated, powder-coated.
– Other models; Housing: closed sheet steel
extrusion, zinc-passivated, powder-coated
texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
Data interface:
–The plug strip can be integrated into the
network via an RJ45 plug.
–Access is possible without special software
via a remote browser.
–Three variable limit values and a warning for
unbalanced loads can be specified.
–The module enables access for up to 5 users or
administrators; access is password-protected.
–The software displays the name and location of
the PDU; this information can be entered by an
administrator.
–The user can specify a static IP address or access
using DHCP.
–Firmware updates can be made via a web
browser.
–Supported protocols: HTTP, SNMP (Traps, SET,
GET), Syslog.
Dimensions
– Width: 84 mm (PizzaPower), 44.4 mm
(others).
– Height: 60 mm (PizzaPower), 44.4 mm
(others).
Color
– PizzaPower model; Housing: RAL 9005 black.
– Other models; Housing: RAL 7035 light-gray.
– Plastic parts: RAL 7021 dark-gray.
Approvals
– CE label in accordance with Low Voltage
Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV BG.
Scope of delivery
– 1 x socket strip (PDU) with remote ampere
meter.
– 1 x mounting bracket.
– 1 x instruction manual.
Rack PDUs | 261
DI-STRIP®
DI-STRIP Model
Input Values
Voltage
Input Connector
Current
Outputs
C13
C19
Schuko
L
UTE
S
F1
F2
19"
Safe
Order No.
Type 13
Euro plug IEC320 system
With feed cable
Euro input in plug
panel
Euro input on side
panel
230V
16 A
Schuko CEE7/7
6
333
03.600.006.1
230V
16 A
Schuko CEE7/7
9
483
03.602.009.1
230V
10 A
IEC60320 C13
12
483
03.600.312.1
230V
16 A
IEC60320 C19
15
3
783
03.600.418.1
230V
16 A
IEC60309 1ph/N/PE 6h
15
3
783
03.600.518.1
230V
10 A
IEC60320 C14 inlet
6
383
03.622.006.1
230V
10 A
IEC60320 C14 inlet
9
483
03.622.009.1
230V
10 A
IEC60320 C14 inlet
6
333
03.622.706.1
230V
10 A
IEC60320 C14 inlet
9
433
03.622.709.1
230V
10 A
IEC60320 C14 inlet
6
383
03.624.706.1
230V
10 A
IEC60320 C14 inlet
9
483
03.624.709.1
10
483
03.632.010.1
With overload
protection 10 A
Schuko CEE7/7
230V
10 A
GST18 input
in side panel
230V
16 A
GST18
6
383
03.600.206.1
230/400V
3 x 16 A
none
24
1033
03.600.024.1
230/400V
3 x 16 A
none
48
1833
03.600.048.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
24
1033
03.600.824.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
48
1833
03.600.848.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
18
6
1133
03.600.524.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
36
6
1733
03.600.542.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
6
483
03.600.506.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
833
03.300.812.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
18
833
03.600.521.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
18
833
03.300.521.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
21
833
03.600.821.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
45
1733
03.600.845.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
36
1733
03.300.542.1
TriplePower
12
3
3
6
PizzaPower
230V
32 A
IEC60309 1ph/N/PE 6h
7
400
03.631.007.1
230V
32 A
none
7
400
03.631.807.1
230V
32 A
IEC60309 1ph/N/PE 6h
12
720
03.631.124.1
230V
32 A
IEC60309 1ph/N/PE 6h
24
960
03.631.240.1
230V
32 A
IEC60309 1ph/N/PE 6h
21
1017
03.631.214.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
21
933
03.631.021.1
230/400V
3 x 32 A
none
21
933
03.631.821.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
6
408
03.631.006.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
9
12
939
03.631.912.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
36
1362
03.631.360.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
18
1002
03.631.186.1
4
4
6
BladePower
230V
32 A
IEC60309 1ph/N/PE 6h
2
3
375
03.630.005.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
6
9
740
03.630.015.1
230V
32 A
none
2
3
375
03.630.805.1
230/400V
3 x 32 A
none
6
9
740
03.630.815.1
230V
16 A
Schuko CEE7/7
17
1783
03.300.067.X
230V
16 A
Schuko CEE7/7
13
1383
03.300.063.X
230V
16 A
Schuko CEE7/7
9
983
03.300.059.X
230V
16 A
Schuko CEE7/7
5
583
03.300.055.X
230V
16 A
Schuko CEE7/7
16
1733
03.302.066.X
230V
16 A
Schuko CEE7/7
12
1333
03.302.062.X
230V
16 A
Schuko CEE7/7
8
933
03.302.058.X
230V
16 A
Schuko CEE7/7
4
533
03.302.054.X
Classic
262 | Rack PDUs
DI-STRIP®
DI-STRIP Model
Input Values
Input Connector
Outputs
C13
C19
Schuko
L
UTE
S
F1
F2
19"
Safe
Order No.
Voltage
Current
Type 13
230V
16 A
Schuko CEE7/7
13
1383
03.400.063.X
230V
16 A
Schuko CEE7/7
9
983
03.400.059.X
230V
16 A
Schuko CEE7/7
5
583
03.400.055.X
230V
16 A
Schuko CEE7/7
8
933
03.402.058.X
230V
10 A
SEV 1011 T12
13
1383
03.701.063.1
230V
10 A
SEV 1011 T12
9
983
03.701.059.1
230V
10 A
SEV 1011 T12
5
583
03.701.055.1
230V
10 A
SEV 1011 T12
16
1733
03.703.066.1
230V
10 A
SEV 1011 T12
8
933
03.703.058.1
230V
16 A
Schuko CEE7/7
15
883
03.300.015.X
230V
16 A
Schuko CEE7/7
11
732
03.300.111.X
230V
16 A
Schuko CEE7/7
11
683
03.300.011.X
230V
16 A
Schuko CEE7/7
7
532
03.300.107.X
230V
16 A
Schuko CEE7/7
7
483
03.300.007.X
230V
16 A
Schuko CEE7/7
8
483
03.300.008.1
230V
16 A
Schuko CEE7/7
4
382
03.300.104.X
230V
16 A
Schuko CEE7/7
4
333
03.300.004.X
230V
16 A
Schuko CEE7/7
14
883
03.302.014.X
230V
16 A
Schuko CEE7/7
10
732
03.302.110.X
230V
16 A
Schuko CEE7/7
10
683
03.302.010.X
230V
16 A
Schuko CEE7/7
6
532
03.303.106.X
230V
16 A
Schuko CEE7/7
6
532
03.302.106.X
230V
16 A
Schuko CEE7/7
6
483
03.302.006.X
230V
16 A
Schuko CEE7/7
7
483
03.302.007.1
230V
16 A
Schuko CEE7/7
3
382
03.302.103.X
230V
16 A
Schuko CEE7/7
3
333
03.302.003.X
230V
10 A
IEC60320 C14
8
483
03.300.308.1
230V
16 A
IEC60320 C20
8
483
03.300.408.1
230V
16 A
GST18
6
583
03.302.206.1
230V
16 A
GST18
3
433
03.302.203.1
230V
16 A
GST18
7
533
03.300.207.1
230V
16 A
GST18
4
383
03.300.204.1
230V
16 A
Schuko CEE7/7
11
683
03.400.011.X
230V
16 A
Schuko CEE7/7
7
532
03.400.107.X
230V
16 A
Schuko CEE7/7
7
483
03.400.007.X
230V
16 A
Schuko CEE7/7
4
333
03.400.004.X
230V
16 A
Schuko CEE7/7
10
683
03.402.010.X
230V
16 A
Schuko CEE7/7
6
483
03.402.006.X
230V
16 A
Schuko CEE7/7
3
333
03.402.003.X
230V
16 A
GST18
7
533
03.400.207.1
230V
16 A
GST18
4
383
03.701.011.1
230V
10 A
SEV 1011 T12
11
683
03.701.007.1
230V
10 A
SEV 1011 T12
7
483
03.701.004.1
230V
10 A
SEV 1011 T12
4
333
03.703.110.1
230V
10 A
SEV 1011 T12
10
732
03.703.1101
230V
10 A
SEV 1011 T12
6
483
03.703.006.1
230V
10 A
SEV 1011 T12
3
382
03.703.103.1
230V
10 A
SEV 1011 T12
3
333
03.703.003.1
Classic
Compact
UPS application
Protector FI
230V
16 A
Schuko CEE7/7
13
883
03.304.013.1
230V
16 A
Schuko CEE7/7
9
683
03.304.009.1
230V
16 A
Schuko CEE7/7
5
483
03.304.005.1
230V
16 A
Schuko CEE7/7
483
03.404.005.1
5
Rack PDUs | 263
DI-STRIP®
DI-STRIP Model
Input Values
Voltage
Input Connector
Current
Outputs
C13
C19
Schuko
L
UTE
S
F1
F2
19"
Safe
Order No.
Type 13
Protector LS
230V
16 A
Schuko CEE7/7
13
883
03.308.013.1
230V
16 A
Schuko CEE7/7
9
683
03.308.009.1
230V
16 A
Schuko CEE7/7
5
483
03.308.005.1
230V
16 A
Schuko CEE7/7
483
03.408.005.1
5
Protector FI/LS
230V
16 A
Schuko CEE7/7
13
883
03.310.013.1
230V
16 A
Schuko CEE7/7
9
683
03.310.009.1
230V
16 A
Schuko CEE7/7
5
483
03.310.005.1
230V
16 A
Schuko CEE7/7
9
683
03.410.009.1
230V
16 A
Schuko CEE7/7
5
483
03.410.005.1
230V
10 A
SEV 1011 T12
483
03.711.005.1
5
Protector emergency stop switch
Compact
230V
16 A
Schuko CEE7/7
230V
16 A
Schuko CEE7/7
6
10
483
03.326.006.1
683
03.426.010.1
683
03.328.008.1
Protector emergency stop switch FI/LS
230V
16 A
Schuko CEE7/7
8
230V
16 A
Schuko CEE7/7
13
883
03.312.013.X
230V
16 A
Schuko CEE7/7
9
683
03.312.009.X
230V
16 A
Schuko CEE7/7
5
483
03.312.005.X
230V
16 A
GST18
483
03.612.206.1
Power Cleaner
6
Safety Basic
230V
16 A
Schuko CEE7/7
10
732
03.316.110.1
230V
16 A
Schuko CEE7/7
10
683
03.316.010.X
230V
16 A
Schuko CEE7/7
6
483
03.316.006.X
230V
16 A
Schuko CEE7/7
4
383
03.316.004.1
230V
16 A
GST18
4
433
03.316.204.1
230V
16 A
GST18
483
03.616.206.1
230V
16 A
Schuko CEE7/7
483
03.416.006.1
230V
16 A
Schuko CEE7/7
13
883
03.318.013.X
230V
16 A
Schuko CEE7/7
9
732
03.318.109.X
230V
16 A
Schuko CEE7/7
9
683
03.318.009.X
230V
16 A
Schuko CEE7/7
5
532
03.318.105.X
230V
16 A
Schuko CEE7/7
5
483
03.318.005.X
230V
16 A
GST18
230V
16 A
Schuko CEE7/7
230V
10 A
SEV 1011 T12
6
6
Safety Standard
6
5
5
483
03.618.206.1
483
03.418.005.X
483
03.719.005.1
Master-Slave
230V
16 A
Schuko CEE7/7
9
683
03.314.009.1
230V
16 A
Schuko CEE7/7
5
483
03.314.005.1
230V
16 A
Schuko CEE7/7
483
03.414.005.1
5
Combi (technical description on page 238)
230V
16 A
Schuko CEE7/7
9
733
03.320.009.1
230V
16 A
Schuko CEE7/7
5
533
03.320.005.1
M
230V
32 A
IEC60309 1ph/N/PE 6h
7
483
03.636.007.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
21
933
03.636.021.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
21
1033
03.606.821.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
45
1833
03.606.845.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
18
6
1133
03.606.824.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
36
6
1733
03.606.842.1
230V
16 A
Schuko CEE7/7
483
03.306.006.1
230V
16 A
Schuko CEE7/7
483
03.606.009.1
230V
16 A
GST18
233
03.606.200.1
264 | Rack PDUs
6
9
DI-STRIP®
DI-STRIP Model
Input Values
Voltage
Input Connector
Current
Outputs
C13
C19
Schuko
L
UTE
S
F1
F2
19"
Safe
Order No.
Type 13
RM
230V
16 A
Schuko CEE7/7
8
733
03.307.008.1
230V
16 A
Schuko CEE7/7
17
1183
03.307.017.1
230V
16 A
Schuko CEE7/7
9
633
03.607.009.1
230V
16 A
Schuko CEE7/7
18
933
03.607.018.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
24
1133
03.607.825.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
45
1833
03.607.845.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
18
6
1233
03.607.824.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
36
6
1833
03.607.842.1
230V
32 A
IEC60309 1ph/N/PE 6h
24
1111
03.637.023.1
230V
32 A
IEC60309 1ph/N/PE 6h
12
4
871
03.637.016.1
230V
32 A
IEC60309 1ph/N/PE 6h
21
4
1168
03.637.025.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
6
563
03.637.006.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
6
12
995
03.637.018.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
21
1022
03.637.021.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
18
6
1157
03.637.024.1
230/400V
3 x 32 A
IEC60309 3ph/N/PE 6h
36
6
1751
03.637.042.1
Outputs:
C13
= IEC60320 C13
C19
= IEC60320 C19
Schuko = Protective contact plug DIN 49440
UTE
= France Standard CEE 7-V
Type 13 = Switzerland, type 13
F2
= Design side panel (for installing at workstation)
= Length in mm
19"
= Suitable for 19" installation
S
= Switch
safe
= Child-proof
F1
= Standard side pane (for rack mounting)
L
Rack PDUs | 265
DI-STRIP®
3-Phase in Rack with GST18
Features
Requirement
Constant energy increase requirements in the rack caused by high
packing densities (e.g. 1 U Pizza
servers, blade servers, etc.) (1)
Solution
3-phase distributor with GST18
plug system, e.g. 96 A with
redundant feed. (2)
1. DOS20147
2. DOS20132
3. DOS20142
4. DOS20135
Benefits (3, 4)
– Modularity.
– Plug-in capability (no wiring
required).
– Can be expanded.
– Cascadable.
– Easy implementation of
redundancies/UPS-secured circuits.
– Combination of DIN Schuko /
IEC320 Euro systems.
– Any installation position can be
selected.
– Good alternative to 3-phase
DI-STRIP Triple Power.
Power Supply Cable, 3-Phase
Accessories for GST 18 Plug System
Color
– Black.
–GST 18 socket for connecting GST18i5
distributor block with 3 phases.
– 5-pole (L1, L2, L3, N, PE) 250/400 V ~.
– Cable: H05VV-F 5G 2.5 mm2.
DOS20104
L
Order No.
UP
2000
04.000.048.0
1 unit
Order No.
UP
04.000.038.9
1 unit
GST18i5 Distributor Block, 3-Phase
– For individual connection at the customer.
– Modular plug-in connection.
–3-phase distribution on various socket strips.
– Including mounting panel.
DOS20103
266 | Rack PDUs
Color
– Black.
DI-STRIP®
Power Supply Cable, Single Phase
Accessories for GST 18 Plug System
– Mains plug CEE/VII: GST18 socket (Wieland).
– Cable: H05VV-F3G 1.5 mm2.
Color
– White.
L
Order No.
UP
2000
04.000.040.0
1 unit
5000
04.000.041.0
1 unit
DOS00467
Connection Cable
Accessories for GST 18 Plug System
– GST 18 plug.
– GST 18 socket.
– Cable: H05VV-F3G 1.5 mm2.
DOS00469
Color
– For color coding circuits (e.g. UPS).
L
Model
Order No.
UP
200
White
04.000.042.0
1 unit
200
Black
04.000.042.9
1 unit
500
White
04.000.037.0
1 unit
500
Black
04.000.037.9
1 unit
1000
White
04.000.044.0
1 unit
1000
Black
04.000.044.9
1 unit
5000
White
04.000.045.0
1 unit
Order No.
UP
04.000.046.0
1 unit
Order No.
UP
04.000.047.0
1 unit
DOS20105
GST18 Socket
– With threaded connection for cross-section
1.5 – 2.5 mm2 with cable strain relief.
– For individual connection.
Color
– White.
DOS00471
GST18 Plug
– With threaded connection for cross-section
1.5 – 2.5 mm2 with cable strain relief.
–For individual, further cabling.
Color
– White.
DOS00470
Rack PDUs | 267
DI-STRIP®
Mains Cable for Euro Socket Strip
For DIN 49 440 and French/Belgian Standard
– Mains plug CEE/VII: Euro socket IEC 320.
– Cable: H05VV-F 3G 1 mm2.
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
DOS00076
L
Order No.
UP
2000
04.000.054.9
1 unit
6000
04.000.053.9
1 unit
L
Order No.
UP
2000
04.000.055.9
1 unit
L
Order No.
UP
2000
04.000.056.9
1 unit
Mains Cable for Euro Socket Strip
For Swiss Standard
– Mains plug: Type 12 - Euro socket IEC 320.
– Cable: H05VV-F 3G 1 mm2.
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
DOS00077
Mains Cable for Euro Socket Strip
For British Standard
–Mains plug: Type BS 1363 IEC320 Euro socket.
– Cable: H05VV-F 3G 1 mm2.
DOS00078
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
Euro Connection Cable
–
–
–
–
DOS00519
Mains plug: IEC 320.
Euro socket IEC 320.
Cable: H05VV-F 3G 1 mm2.
USA: SJT AWG18 with USA approval.
L
Model
Order No.
UP
EU
04.000.051.9
1 unit
900
USA
04.000.052.9
1 unit
Conversion:
n = Number of sockets
U
S = Switch
F1 = Standard side panel
UP = Packaging unit
F2 = Design side panel
= Standard rack unit
Safe = child-proof
19" = ideal for 19" components
Replace .x with the number of your color combination: .1 = RAL 7035, .6 = RAL 7035/RAL 2003
268 | Rack PDUs
Nominal current
– 10 A.
900
Dimensions in mm:
L = Length
Mains voltage
– 250 VAC.
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
DI-STRIP®
SafetySleeve™ Cable Protection IEC C19
– SafetySleeves protect the feed lines of the
network equipment.
–Compatible with all C19 cables and fit onto
all PDUs.
DOS20493
Material / Finish
– PVC, black.
Model
Order No.
UP
C20 plug in C19 socket
03.910.212.9 001
20 unit
Model
Order No.
UP
C14 plug in C13 socket
03.910.213.9 001
50 unit
SafetySleeve™ Cable Protection IEC C13
– SafetySleeves protect the feed lines of the
network equipment.
–Compatible with all C13 cables and fit onto
all PDUs.
Material / Finish
– PVC, black.
DOS20494
Dimensions in mm:
Conversion:
L = Length
n = Number of sockets
U
S = Switch
F1 = Standard side panel
UP = Packaging unit
F2 = Design side panel
= Standard rack unit
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Safe = child-proof
19" = ideal for 19" components
Replace .x with the number of your color combination: .1 = RAL 7035, .6 = RAL 7035/RAL 2003
Rack PDUs | 269
Emerson Network Power Rack PDUs
Rack PDU Support
and Warranty Options
Emerson Network Power offers you various options to ensure that you get the support you need in the event of a
fault. You can get in touch with your usual contact person directly or contact us by phone or e-mail.
Technical Support
W
ebsite:
www.EmersonNetworkPower.eu
T
elephone:
+800 1155 4499
E -mail:
[email protected]
Warranty Extension
When you purchase PDUs from us, you also have the option of ordering
warranty extensions for certain models. The following overview shows you the
various options available for increasing your service level.
Order No.
Warranty term (months)
24
36
60
MPH2 B Version (all B models)
free of charge
WE1Y-MPH2VB
WE3Y-MPH2VB
MPH2 R, C, M Versions (all R, C, M models)
free of charge
WE1Y-MPH2VRCM
WE3Y-MPH2VRCM
MPX Components (excluding sensors and display)
free of charge
WE1Y-MPX
WE3Y-MPX
If a warranty case should unfortunately arise for your product, we will decide
whether to repair or replace the defective product based on the type of defect
in question. Please contact your usual sales contact in such cases.
270 | Rack PDUs
Knürr RMS Compact II®
Knürr RMS Compact II®
Constant Reliability with Remote Monitoring
The advantages of Knürr’s modern
rack monitoring system:
Guarantees fault-free operation.
Early disturbance detection.
Incident logging.
Automatic monitoring simplifies
maintenance.
Activates countermeasures in
the event of a malfunction.
Central status control of:
filters, paper, toner, meter readings,
inspection intervals, and much
more.
System Reliability and Availability
System and network management
requirements mean the systems’ ambient conditions must be monitored.
Compliance with the required ambient
parameters is extremely important for
successful/continuous operation of
high-grade components.
Management Software
Inadmissible fluctuations in temperature or humidity often cause hardware
defects. Constant automatic monitoring of these parameters is therefore a
basic requirement for safeguarding
operability. All the relevant data can
be recorded and forwarded directly to
a higher-level management system,
e.g. Nagios Liebert Nform™ with the
Knürr RMS Compact II®.
Alarm Consolidation and Control
Simply recording data does not suffice
to ward off damages. When faults
occur, short response times are aided
by the monitoring system triggering
actions automatically (e.g. activating
additional fans).
Fast Response
When defined incidents occur, the
RMS Compact II can immediately send
a message as an "SNMP trap" to the
management system or directly as
an e-mail to a technician or an SMS
gateway.
Up to 12 sensors can
be connected in any arrangement.
Monitoring | 271
Knürr RMS Compact II®
Knürr RMS Compact II®
RMS20013
RMS20015
Description
–C
ompact construction - Zero unit solution
(for mounting outside the 19" installation
area).
–1
9" installation with adapter bracket.
– S afe clamping of all connected cables with
integrated cable clamping bracket.
–C
ost-effective orderly installation with
Plug & Play concept.
–C
onvenient cabling with RJ45 sensor
connections.
–T
CP/IP connection via Ethernet
(10/100 Base T).
–C
onfiguration via SNMP and Web-Browser.
–W
eb access is password-protected and
optionally encrypted (https).
–3
different user levels.
– F reely programmable filter system (Boolean
logic) for implementing all alarm conditions.
–C
ompatible with standard network-management and infrastructure-management systems such as Liebert Nform™ or Open-Source.
– S ensors for monitoring all relevant
environmental influences (optional).
– I nternal power supply for sensor equipment
(no additional power supply necessary).
–A
larms via LEDs, relay, network management
or e-mail (SMTP).
– S upport from Modbus/TCP.
– S ystem time balancing with NTP servers.
Technical data
– 12 universally usable sensor inputs for
temperature and humidity sensors,
digital (on/off) or analog sensors (0...10V).
– 3 digital outputs (2 x relay, max. 3 A at
230 VAC, 1 x 750 mA at 48 VDC).
– Power supply: 100 – 240 VAC.
– Operating voltage: 12 VDC.
Compliance
– CE marking compliant with
Low Voltage Directive 73/23/EEC;
EMC directive 89/336/EEC.
Color
– RAL 7021, dark-grey.
Scope of delivery
– 1 x Knürr RMS Compact II.
– 1 x power supply unit.
– 2 x 19" mounting brackets.
– 1 x support bracket for power supply unit.
– 1 x CD ROM (with manual, MIB file)
How supplied
– In sets.
RMS20047
RMS20048
272 | Monitoring
W
H
D
Model
Order No.
UP
350
42
170
RMS Compact II®
06.108.200.8
1 set
Knürr RMS Compact II®
ECO Temperature Sensor
Door Contact Sensor
N
o additional magnet required
– Magnet bridge sensor works on all
magnetic conductive materials
(no special mating part required).
– Can also be used for monitoring
side panels and roof.
– Standard cable length, 4 m.
Quick and easy installation
– Insensitive to disturbances.
– No additional power supply required.
– The sensor must be recalibrated.
LUF20069
RMS20006
Technical data
– Temperature measurement range:
0...60°C.
–A
ccuracy : ± 5 %.
Scope of delivery
– 1 x sensor.
– 1 x mounting kit.
Model
Order No.
UP
ECO
06.108.220.9
1 unit
Technical data
– Temperature range: -20° C to +70° C.
– Switching voltage, max. 200 VDC.
– Switching current, max. 500 mA.
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
Humidity Sensor
RMS20019
(similar to picture)
RMS compact-specific
Avoids dew
– Insensitive to disturbances.
– Additional power supply required.
– The sensor does not have to be
recalibrated.
Technical data
– Air measurement range 30 – 90 %.
– Accuracy: ± 5 %.
Scope of delivery
– 1 x sensor with RJ45 port.
– 1 x mounting kit.
UP
06.108.212.9
1 unit
RMS20032
Water Sensor
RMS20031
C
onductive water spot sensor
– Detects presence of water.
Technical data
– Operating voltage: max. 24 VDC.
UP
06.108.215.9
1 unit
Air Speed Sensor
Order No.
Order No.
F an and filter monitoring
– No additional power supply.
– Automatic detection as analog sensor.
– Does not have to be recalibrated.
– Offset and alarm parameters can be set
in RMS.
Technical data
– Measurement range: 0 to 1 m/s.
– Non-linear measurement,
Value table:
< 0 m/s < 1 V
0 m/s 1 V
1 m/s 1.7 V
2 m/s 2.9 V
3 m/s 4.1 V
4 m/s 5 V (6 V max.).
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
W
H
D
Order No.
UP
20
39
9
06.108.218.9
1 unit
Scope of delivery
– 1 x sensor with 2 m connection cable.
– 1 x mounting bracket.
Order No.
UP
06.108.217.9
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Monitoring | 273
Knürr RMS Compact II®
Smoke Detector
Sensor Cable
S
ends signal to IT Department
– Optical smoke detector with VdS
approval.
– For early fire detection with smoke
emission.
– Power supply provided via RMS
compact.
– Standard cable length, 4 m.
Technical data
– Operates between -20°C and +75°C.
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
W
H
Order No.
UP
Ø 90
75
06.108.211.9
1 unit
Plug & Play for own sensors
(Third party and/or any existing
analogue/digital sensor)
– The 4 m long cable is used for
connecting further analog/digital
sensors or alarm outputs to the
sensor input of the Knürr RMS
compact II.
– One end of the cable has an RJ45
connection while other end is open.
– The RMS automatically recognizes a
sensor that is connected to this cable
as an analog sensor.
– A sensor can be supplied with 12 V
voltage using the cable.
Technical data
– Length: 4 m.
Scope of delivery
– 1 x cable.
– 1 x layout overview.
How supplied
– In sets.
Vibration Sensor
P
rotection against vandalism
– Detects vibrations.
– Theft prevention.
– Reset possible via Viewer software.
Scope of delivery
– 1 x sensor with 4 m connection cable.
Order No.
UP
06.108.213.9
1 unit
Security
– Room monitoring with state-of-theart technology.
L
Order No.
UP
4000
06.108.225.9
1 unit
Digital sensor cable
4000
06.108.224.9
1 unit
Sensor Extension Cable
F lexible positioning of sensors
– The cable is used for extending RMS
compact II sensors.
– It consists of a cable with a connected
RJ45 plug and an RJ45 connector.
Passive Infrared Movement Sensor
Model
Analog sensor cable
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
Technical data
– VdS approval: Classes A + B.
– Range of volumetric lens: 2 – 16 m.
– Long lens range: 29 – 50 m.
– Curtain lens range: 17 – 30 m.
– Manipulation monitoring.
– Digital fault evaluation.
– Corner or wall mounting.
Technical data
– Length: 3 m and 10 m.
Scope of delivery
– 1 x cable.
How supplied
– In sets.
Model
L
Order No.
UP
Sensor extension cable
3000
06.108.223.1
1 unit
Sensor extension cable
10000
06.108.223.5
1 unit
Power over Ethernet (PoE) Update Set
Order No.
UP
06.108.214.9
1 unit
S
ave on cabling
– Saves on costly power supply
installations (e.g. WLAN access
points) or enables centralized UPSs
for decentralized equipment (e.g.
IP phones).
– Using the PoE update set, the RMS
can therefore support installations
with the corresponding UPS concepts
and/or non-standard IDF room.
Technical data
– Input: 48 V DC, 400 mA.
– Output: 12 V DC (12 W).
– Operating temperature: 0° to 40° C.
– Storage temperature:
-40° to 70° C.
– Operating air humidity:
10% to 80% rel. humidity.
Dimensions
– Length: 81 mm.
– Width: 52 mm.
– Height: 28 mm.
Approvals
– EMI: FCC Part 15 Class B, CE Class B.
– Safety: UL, TUV.
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
274 | Monitoring
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Scope of delivery
– 1 x PoE adapter.
– 1 x mounting bracket for easy
attachment to the RMS (similar to the
classic power supply unit mounting
bracket).
How supplied
– In sets.
Model
Order No.
UP
PoE update set
06.108.230.8
1 unit
Knürr RMS Compact II®
Carbon Monoxide
Alarm Sensor
D
etects smoke-free gases
and triggers an alarm
– Used for detecting carbon monoxide
emitted by burning fire-retardant
cables.
– Sends signals carbon monoxide to
the RMS and triggers an alarm.
– Standard cable length, 4 m.
– The RMS automatically recognizes
this sensor as a digital sensor.
Technical data
– Operating voltage: 12 VDC (± 20 %).
–P
ower consumption: approx. 190 mA
(idle) approx. 280 mA (alarm).
– S ensitivity: 100 ppm CO.
–A
mbient temperature:
-15° C to 40° C.
–P
iezo alarm: approx. 85 dB(A) at 3 m
away.
–P
rotection rating: IP 20.
– S witching output 12 V DC:
Max. 170 mA.
–R
elay output: Changeover contact,
max. 5 A 230 V DC, max. 5 A 30 V DC.
–R
eset: automatic when the gas concentration falls below sensitivity level.
Dimensions
– Length: 140 mm.
– Width: 125 mm.
– Height: 40 mm.
Color
– White.
Scope of delivery
– 1 x sensor.
– 1 x sensor connection cable.
– 1 x Mounting kit.
– 1 x Instructions.
How supplied
– In sets.
Model
Order No.
UP
Carbon monoxide alarm sensor
06.108.211.8
1 unit
Liebert Nform™
Increases Reliability and Energy Efficiency
Liebert Nform™ helps meet these requirements:
Overview of data center status
Liebert Nform is data-center monitoring software especially for Liebert
infrastructure systems with a trend analysis function, alarm management
and result notifications.
What does Nform offer?
Liebert Nform provides a uniform monitoring interface with an overview
of the operative status of a large number of devices, such as:
– PDUs: Liebert MPX®, Liebert MPH®, Knürr DI-STRIP® RM.
Uninterrupted power supplies.
Water-cooled racks, such as:
– Knürr CoolLoop®, Knürr CoolTherm®.
Thermal management equipment.
Environmental monitoring systems, such as:
– Knürr RMS Compact II®.
Monitoring | 275
Inline Metering System
Inline Metering System (IMS)
Optimum Upgrade Solution for Existing Installations
Emerson Network Power Inline
Metering System (IMS) benefits:
Existing rack PDUs can be
retrofitted for optimal savings.
Almost all consumers can be
integrated into the monitoring
system, since numerous plug
systems are provided (1 ph – 3 ph,
max. 63 A per phase).
Monitoring is already part of the
everyday routine in most data centers
when it comes to system availability.
Consequently, new systems are
equipped with socket strips or PDUs
with integrated monitoring (Managed PDUs or Adaptive PDUs). Yet,
what can be done about existing
systems containing socket strips or
PDUs that do not provide measuring
functions?
Flexible installation inside or
outside the rack (e.g. on shelf).
Emerson Network Power's solution
for this is called IMS (Inline Metering
System). These modules allow existing
racks with installed basic power distributors to be upgraded accordingly.
As almost all server racks are supplied
with an A and B-feed, retrofitting is
possible without have to interrupt
operation. The IMS modules can also
be installed inside or outside the rack;
e.g., on the shelf to save space. The
Inline Metering Systems (IMS) are
divided into three different product
groups with different features.
276 | Monitoring
MPX IMS
Features
The rack PDU software interface is familiar; communication card is the same as the ones
for MPX/MPH.
Highest possible reliability and availability with an operating temperature of max. 55°C.
Comprehensive measurement functions (electricity, current, power and energy) with a
high measurement accuracy of up to ± 1 %.
N-conductor overload with 3-phase systems can be prevented as the N-conductor
current is monitored.
Easy connection to the network of up to 4 Liebert MPX IMS / MPH / MPX with only one
IP address.
External sensors and a display can also be connected.
Knürr MODULAR IMS
IMS model series overview
Features
Extensive measurement functions (electricity, current, effective power, apparent power,
reactive power, energy and power factor), with high measurement accuracy of up to
0.17 % (referring to the end value of specified measurement range).
Very high input currents can be measured (up to 999 A per phase via external transducer).
The modular setup allows the solution to be customized (e.g. up to 4 in-feeds per
module with different input plugs or even fixed feed).
Up to 75 modules can be controlled via one IP address.
Storage in external databases possible without additional software.
Emerson Network Power Rack PDUs
INPUT POWER
Single-phase or three-phase
16 A up to max. 63 A
OUTPUT DISTRIBUTOR
Single-phase or three-phase
16 A up to max. 63 A
MODULARITY
External displays or external sensors
(depending on the type of communication card).
MONITORING
Input level
LOCAL MONITORING
Display for user (MPX™ IMS).
REMOTE MONITORING
Secure web and SNMP interfaces
RACK PDU ARRAY™
One IP address; up to 4 rack PDUs (MPX IMS)
MPX, MPH™ and IMS in the same private network
Inline Metering System
Emerson Network Power IMS – product series
Features
MPX™ IMS
Knürr Modular IMS
Measurement module
Modular
Display
External
Remote interface
Measuring at input level
Measurement modules per IP address
4
75
Max. measurement points per IP address
4
300
Visualization at PDU level
Visualization at rack level
Visualization at room level
Only with additional software: Nform
or Avocent DSView
Measurement parameters
A, V, W, kWh
A, V, W, VA, Var, kWh, cosphi
1 ph + 3 ph, max 32 A
1 ph + 3 ph, max. 63 A (max. 4 feeds ),
max. 3 ph 999 A (via external transducer)
IEC 60309
IEC 60309, GST18, fixed connection
HTTP, HTTPs, SNMP, Telnet
HTTP, HTTPs, SNMP v3,
Only with additional software: Nform or Avocent DSView
Oracle, MySQL, MSSQL
1 ph. 16 A
MPXIMS-EHBAXS30
On request
1 ph. 32 A
MPXIMS-EHBAXQ30
On request
3 ph. 16 A
MPXIMS-EHBAXT30
On request
3 ph. 32 A
MPXIMS-EHBAXR30
On request
Not required
On request
Phase asymmetry analysis
External sensor connection options
Input power
Connection option
Protocols
Storage in external database
Order number
Control unit
278 | Monitoring
Inline Metering System
Easy Upgrade from Basic Power Distributor to Measurement-enabled
Power Distributor
Monitoring | 279
Inline Metering System
Liebert MPX™ IMS
– Existing rack PDUs do not have to be
replaced as the modules can be retrofitted.
–Almost all consumers can be integrated into
the monitoring system, since numerous plug
systems are provided (1 ph – 3 ph, max. 32 A
per phase).
–Flexible installation inside or outside the rack
(e.g. on shelf).
–Liebert Rack PDU software interface is familiar;
communication card is the same as the one for
Liebert MPX/MPH.
–Highest possible reliability and availability with
an operating temperature of max. 55°C.
–Comprehensive measurement functions
(electricity, current, power and energy), with
high measurement accuracy of up to ± 1 %.
–N-conductor overload with 3-phase systems
can be prevented since the N-conductor current
is monitored.
–Easy connection to the network of up to
4 Liebert MPX IMS / MPH / MPX with only
1 IP address.
–External sensors and a display can also be
connected.
IMS_8141
Technical data
Interfaces:
–R
J-45 LAN port (10/100 MBit) for connecting
to local area network (LAN) via an Ethernet
cable.
– E xpansion / administration port for local
configuration using a computer / laptop, for
setting up a link-up of several PDUs (Liebert
MPX™ or MPH™).
– S erial interface RS232.
–D
isplay port for connecting the RPC BDM
(display module).
– E xternal sensor port for connecting optional
sensors.
–R
emote management: Onboard web
interface, CLI, SNMPv1, 2, 3, SSH, Telnet,
integratable into Avocent ACS, UMG & MPU,
DSView, Rack Power Manager, Nform & Trellis
as well as Nagios or other management
software programs.
–A
uthentication: local, remote; active
directory, LDAP, TACACS, Radius, Kerberos.
– E ncryption: MD5, AES, DES.
Supported technologies:
– Web support provided by Liebert MPX control
and management. Authorized users can view
status information via their network.
– SNMP support provided by Liebert MPX SNMP
management.
– Easy integration into Liebert Nform, Avocent
DSVIEW3 and Nagios.
Material / Finish
– Enclosure: aluminum.
– Cover: sheet steel.
Dimensions
– Height: 81 mm.
– Width: 75 mm.
– Length: 266 mm.
– Input cable length: 3 m.
– Output cable length: 0.5 m.
Certification
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV GS.
Color
– Enclosure: aluminum/RAL 7021 dark-gray.
Scope of delivery
– 1 x MPXIMS-Module/power supply.
How supplied
– In sets.
Model
L
Input values
Input connector
Output socket
Order No.
UP
Liebert MPX™ IMS 1 x 16 A
266
230 Vac, 16 A
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
MPXIMS-EHBAXS30
1 unit
Liebert MPX™ IMS 1 x 32 A
266
230 Vac, 32A
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
MPXIMS-EHBAXQ30
1 unit
Liebert MPX™ IMS 3 x 16 A
266
230/400 VAC, 16 A
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
MPXIMS-EHBAXT30
1 unit
Liebert MPX™ IMS 3 x 32 A
266
230/400 VAC, 32 A
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
MPXIMS-EHBAXR30
1 unit
280 | Monitoring
Inline Metering System
Knürr Modular IMS
–Existing rack PDUs modules can be retrofitted.
–Almost all consumers can be integrated into the
monitoring system, since numerous plug
systems are provided (1 ph – 3 ph, max. 63 A
per phase).
–Flexible installation inside or outside the rack
(e.g. in shelf).
–Extensive measurement functions (electricity,
current, effective power, apparent power,
reactive power, energy and power factor),
with high measurement accuracy of up to
0.17 % (referring to the end value of the specific
measurement range).
–Very high input currents can be measured
(up to 999 A per phase via external transducer).
–The modular setup means the solution can be
customized (e.g. up to 4 in-feeds per module
with different input plugs or even fixed feed).
–Up to 75 modules can be controlled via one
IP address.
–Storage in external databases possible without
additional software.
IMS_Module
Technical data
– The measurement modules can only be
operated with a control unit.
– No more than 75 measurement modules can
be connected to a single control unit.
– 2 x RJ 45 LAN Port 10/100MBit for local
network connection (on the control unit).
– Visualization of all connected measurement
modules via WEB.
– Status information visible via WEB.
– Protocols: HTTP, HTTPs, SNMPv3.
– Storage in external data base possible
(Oracle, MySQL, MSSQL).
– Integration into building systems also possible
via potential-free contacts.
– Temperature sensors can be connected.
Dimensions
– Length/depth (control unit): 600 mm.
– Length/depth (module): 400 mm.
– Width: 483 mm (19").
– Height: 88.8 mm (2 U).
– Power supply cable: length, 2 m.
– Output: socket fixed on device.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– FFC.
– GS Certificate.
– CB scheme.
Color
– RAL 7021, dark-gray.
Scope of delivery
– 1 x Measurement modules, control unit.
How supplied
– In sets.
Model
Input values
Input connector
Output socket
Order No.
UP
Knürr Modular IMS 1x16 A
2 x 230 VAC, 16 A
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
On request
1 unit
Knürr Modular IMS 1 x 32 A
2 x 230 VAC, 32 A
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
On request
1 unit
Knürr Modular IMS 3 x 16 A
2 x 230/400 VAC; 16 A
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
On request
1 unit
Knürr Modular IMS 3 x 32 A
2 x 230/400 VAC; 32 A
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
On request
1 unit
On request
1 unit
Knürr Modular control unit
Monitoring | 281
Emerson Network Power
Glossary
Adaptive Architecture
Industry Terms and Phrases
Power Supply
Cooling
Liebert Adaptive Architecture™
The Liebert Adaptive Architecture
product and technology family
distinguishes itself by delivering an
ideal balance between minimal TCO
and optimal availability.
Availability
Availability is achieved through proven
technology or a system that minimizes
malfunction risks and downtimes of your
IT system.
Power supply; three-phase (EMEA)
A three-phase power circuit has three
conductors, an earth connection, and in
most cases, a neutral conductor. Typical
voltages for such power circuits are
380 V, 400 V and 415 V.
Back cooling
Absorbs the heat generated by air-cooled
condensers and dry coolers for all ambient
temperatures or heights. Hot air or hot water
is drawn off; water is cooled and recirculated.
Open Architecture/
Closed Architecture
Open architecture utilizes cooling coils
and the room's air volume as thermal
storage to guarantee continuity in the
event of power failures.
Closed architecture means that the
rack is entirely closed off. The cooling
coils are inside the enclosure. Other
provisions must be made to bridge
power failures.
Redundancy
Measure of a system's failure tolerance
and the extent to which maintenance
work can be performed on a product in
operation without function loss.
Systems without redundancy can fail
as soon as one single component
fails; or cannot be operated during
maintenance work.
Redundancy is achieved with the
parallel setup of the same components, of which at least one of these
is not required for the system to
achieve 100 % functionality. Such a
setup means that even the failure of
important components or planned
maintenance work will not impair
the product's continuous operation.
Redundancy concepts can therefore
deliver very high system availability
levels.
The highest level of redundancy is
attained with the installation of
two independent systems whose
incoming and outgoing lines are also
separated. Preventive maintenance
work or component faults do not
impair the system's performance
because the second system can take
over the entire desired functionality
at any time.
Flexibility
"Flexible" products and systems that can
be reconfigured or extended to meet the
requirements of new technologies, provide
even more protection, or meet the
requirements of corporate growth or
business changes.
Total Cost Of Ownership
All operating costs (TCO) of a solution,
including purchase, future changes and
maintenance.
Power supply; single-phase (EMEA)
Single-phase power circuits have two
cables and an earth connection. Typical
voltages are 220 V, 230 V and 240 V.
Power density
More power. More heat generation.
Less space. Since the performance of
processors is constantly growing but
the amount of space available is
decreasing, power density rises (from
less than 50 to more than 300 watt
per m2). This generates far more heat,
resulting in hot spots that can occur in
your data center.
UPS types:
Online and Line Interactive
An online UPS is used to back up critical
applications and guarantee a continuous, uninterrupted power supply.
Frequency and wave form are also
regulated. A line-interactive UPS prevents voltage peaks and inadmissible
power-supply parameters. This energyefficient technology regulates the
power supply and the battery backup
system which is especially ideal for
installations that rarely suffer power
failures, but frequently suffer supply
fluctuations.
Battery capacity
The percentage power capacity of your
batteries, depending on their age,
usage period, environment, ambient
temperature and maintenance status.
A normal VRLA battery can achieve 80 %
and has to be replaced after 3-5 years.
Battery runtime
The time (in minutes) in which your
batteries provide power supply and
protect your information in the event
of a power or system failure.
kW
Standard measurement unit for
electrical power. 1 kW is 1,000 W or
power consumption of 1,000 joules per
second. (1 joule is the required energy
it takes to heat 1 kg of water by 1°C.)
282 |
Precision cooling
The precise controlling and regulation of
temperatures, moisture or air filtering.
Hot Aisle / Cold Aisle
A highly efficient method of improving performance with existing raised floor systems
with high-density rack-based installations.
The racks and frames are set up to create
"hot" and "cold aisles". Perforated bottom
covers from which the raised floor's cool air
flows are only placed in the cold aisles.
Sensible heat
"Sensible" or "tangible" heat can can be
directly sensed or measured. Sensible
heat changes a material's temperature.
Essentially, it provides information on
temperature, comparable to that of a
weather forecast. Sensible heat is measured
with a thermometer. Severs, for example,
emit solely sensible heat.
Latent heat
"Latent heat" is the heat energy that goes into
a material's state change. During a thermally
managed cooling process, latent heat is
diverted into the air by vapor condensation
when the air is cooled below dew point
(dehumidification). Latent heat discharge
does not have any effect on the temperature
you feel.
Total heat
Total heat is composed of the heat content of
the air (sensible heat) and the water-vapor
mixture (latent heat). It is crucial for the
thermal device's nominal power.
BTU
BTU is a heat energy unit. It is the amount
of heat required to raise the temperature of
1 British pound of water by 1 degree Fahrenheit (at sea level). One ton of cooling power
is equal to 12,000 BTU/hour.
Ton
A ton, in relation to cooling systems, is the
amount of heat required to melt 1 ton of
ice in 24 hours. A ton is equal to 12,000 BTU/
hour or 3,025,900 calories/hour.
Emerson Network Power
AC Power
Sustaining critical operations that simply can’t go down. We deliver a full range of uninterruptible power
systems plus STS devices, providing everything from individual products to integrated power protection
solutions that keep network closets, computer rooms and data centers up and running.
DC Power
Supporting voice and communication networks through reliable and efficient DC power. The extensive
DC power portfolio includes a wide range of -48 V and 400 V DC systems; from sub-racks to large standalone systems. Improved reliability, increased energy efficiency and load balancing is enabled through the
Intelligent Load Management functionality (patent pending).
Infrastructure Management & Monitoring
Managing and monitoring critical environments at multiple sites around the clock. We make it easy in today’s
ROI-driven business environment, with comprehensive infrastructure management and monitoring systems
for both IT and facilities. Solutions and services that provide continuous oversight of data centers, computer
rooms and network closets, as well as wireless, wireline and enterprise telecom applications.
Power Switching & Controls
Safeguarding facilities from operational disruption due to electrical power interruption. We provide ASCO®
power-transfer switches, generator paralleling switchgear/power control systems, and touch screen SCADA
for monitoring and control of the utility service and on-site backup power generators; all helping to ensure
continuity of supply to essential and mission-critical communications, data-processing, life-safety, and other
critical loads. Backed by the largest manufacturers, direct field based project management and service
technicians in the industry.
Thermal Management
Managing the heat transferred from the data center to the external environment, while assuring the right
temperature and airflow for each server. The Thermal Management range of Liebert® solutions answers to
all different customer needs and applications, adopting state-of-the-art technologies to achieve the highest
efficiency while minimizing energy costs.
Racks & Integrated Solutions
Optimizing technology and performance needs for indoor IT applications. We deliver standard and
customized integrated cabinet solutions that meet unique and specific needs, from Knürr® and Liebert®
rack solutions for computer rooms of all sizes to integrated racks with self-contained cooling, UPS and cable
management in a solid, lockable cabinet.
Surge Protection
Centers of Expertise
When you partner with Emerson
Network Power for your business
continuity needs across your
enterprise, you benefit from
more than products to support
and protect your technology
infrastructure.
Developing such a wide range of
technologies gives us in-depth
industry knowledge and a
“big-picture” understanding of
how all systems must work together
within any critical environment.
We deliver this knowledge through
Emerson Network Power’s Centers
of Expertise: distinct areas of
world-class products and services
that help you determine what you
need and where, depending on your
application.
All so that you can keep your
business moving forward for your
customers.
Defending power, voice and data moving through a network against grid irregularities and dangerous
electrical disturbances. Depending on the application, we offer Liebert® and PowerSure™ AC Power
Protection, Islatrol™ Active Tracking Filters and Edco™ data/signal surge protective devices; all of which
provide power protection to reduce downtime, saving crucial man-hours and extending equipment life.
Service and Solutions
Delivering assessment, testing and reliability programs backed by the largest global services organization in
the industry. We offer engineering, installation, startup services, project management and training together
with entire life-cycle management including preventive and predictive maintenance, remote diagnostics,
on-site operations management, and energy consumption monitoring.
| 283
Emerson Network Power
Emerson Network Power
Data Center Infrastructure for Large Applications
SmartAisleTM
• Aisle containment.
• Provides highest energy efficiency.
•Control compatible with Thermal Management units.
Knürr® Power Distribution Rack
Central connection unit for power supplies in individual server racks.
•Interface between the low voltage feed and PDU.
•Individual plug-in units.
• Up to 346 kVA/Rack.
4
6
4
7
3
1
4
Rack PDU
Rack-based power distribution units.
• Supports strip-level metering, outlet-level switching and outlet-level metering/
switching for remote power management and control.
• Horizontal and vertical models designed for a variety of rack configurations
in branch and remote offices.
1
AC Power
3
2
Infrastructure Management
& Monitoring
4
284 |
Power Switching
& Controls
Thermal
Management
5
Racks & Integrated
Cabinets Solutions
Integrated
6
Surge Protection
7
DC Power
Emerson Network Power
Service
Emerson Network Power supports
entire critical infrastructures with the
largest global service organization
and an extensive service offering,
enhancing network availability and
ensuring total peace of mind 24/7.
Our approach to servicing critical
infrastructure covers all aspects of
availability and performance: from
single power and thermal management
equipment to entire mission-critical
systems.
The most comprehensive insurance for
business protection can be obtained
with a service program from Emerson
Network Power which includes access
to LIFE™.
4
7
1
5
2
LIFE™
Knürr® DCD
Passive chilled water heat exchanger.
• Cooling capacity up to 35 kW.
• “Room-neutral” design.
• Usable for third party racks.
Knürr Miracel®/Knürr® DCM
Global rack platform for
data centers, networks and
telecommunications.
• Lightweight aluminum frame.
• T-slot system.
• Simple cable management.
• Holds up to 1,500 kg.
• Also available with @lock
(electronic locking solutions).
LIFE provides remote diagnostics and
preventive monitoring service for UPS
and thermal management equipment.
LIFE delivers increased uptime and
operational efficiency by enabling
continuous monitoring of your
equipment, expert data analysis and
field engineering expertise.
Through the data transferred from
your equipment via LIFE, our remote
service experts gain the real-time
insight and information needed
to quickly identify, diagnose, and
resolve any irregularities that may
arise in operation, ultimately taking
responsibility for your critical assets
24/7.
| 285
Emerson Network Power
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement