Datasheet – PRO250X PRO250X − Multimedia Projector Versatile, Bright & Sharp Small, sleek and stylish, the Optoma PRO250X provides a combination of performance and affordability. Including features such as 2800 ANSI lumens, contrast ratio of 3000:1, lamp life of up to 4000 hours, filter-free design and low standby power consumption, the Optoma PRO250X will not only help you save on costs over time but also deliver a perfect, colorful, crisp image to captivate your audience. Features Native XGA DLP® by Texas Instruments with BrilliantColor™ Technology Bright images and high contrast ratio - 2800 ANSI lumens and 3000:1 contrast ratio (full on/full off) Filter-free design means low cost of ownership Rapid power-on and shutdown – no waiting High Definition resolution supported – up to 1080p Wide range of connectivity options: two VGA-in, VGA-out, s-video, composite video, audio-in, audio-out and RS-232 NO FILTER REQUIRED Specifications Display Type Single 0.55” DMD DLP Technology by Texas Instruments Resolution Native XGA (1024 x 768) Maximum Resolution HD (1920 x 1080) Brightness (Typical) 2800 ANSI Lumens Contrast Ratio 3000:1 (Full On/Full Off) Lamp Life and Type 4000/3000 Hours (STD/Bright) 185W UHP Throw Ratio 1.95 to 2.15:1 (Distance/Width) Projection Distance 3.28’ to 32.8’ (1.0 to 10m) Image Size (Diagonal) 22.9” to 300” (0.58 to 7.62m) Aspect Ratio 4:3 Native, 16:9 and 16:10 Compatible Displayable Colors 1.07 Billion Audio 2-Watt Speaker Remote Control IR Remote Offset 115% Uniformity 85% Computer Compatibility HD, UXGA, WXGA, SXGA+, SXGA, XGA, SVGA, VGA Resized, VESA, PC and Macintosh Compatible Video Compatibility NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p) Monitor Loop Through D-Sub 15 pin VGA Output (Functional in Both Normal and Standby Modes) Projection Lens F= 2.41-2.55, f = 21.8-23.98mm, 1.1x Manual Zoom and Focus User Controls Complete On-Screen Menu Adjustments in 23 Languages I/O Connectors Two VGA-In, VGA-Out, Composite Video, S-Video, Stereo Audio-In, Stereo Audio-Out and RS-232 Security Kensington® Lock Port, Security Bar and Keypad Lock Projection Method Front, Rear, Ceiling Mount, Table Top Weight 5 lbs (2.27kg) Dimensions (W x H x D) 11.28” x 3.98” x 7.6” (287 x 101 x 193 mm) Noise Level (STD/BRIGHT) 28dB/30dB Keystone Correction ±40° Vertical Horizontal Scan Rate 15.3 - 91.1 KHz Vertical Refresh Rate 24 - 85 Hz Operating Temperature 41 to 104°F (5 to 40°C), 85% Max Humidity Power Supply AC Input 100-240V, 50-60Hz, Auto-Switching Power Consumption 255 Watts (Bright), 207 Watts (STD), <1 Watt (Standby) Standard Accessories AC Power Cord, VGA to VGA Cable, Remote Control, Batteries for Remote, Carrying Case, Lens Cap, Multilingual CD-ROM User’s Manual, Quick Start Card and Warranty Card Optional Accessories Ceiling Mount, VGA to Component Cable, S-Video Cable, Composite Video Cable, RS-232 Cable and Panoview™ Series Screens UPC 796435 41 140 4 Warranty One Year Limited Parts and Labor, 90 Days on Lamp Accessory Part Numbers Lamp: BL-FU185A Remote: BR-3043N Mount: BM-5001U Case: BK-4006 www.optoma.com © Copyright 2009 Optoma Technology, Inc. All specifications subject to change at any time. DLP® and the DLP logo are registered trademarks of Texas Instruments.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project