Sophos Enterprise Console auditing User Guide
Sophos Enterprise Console auditing is a powerful tool that can help you monitor changes in your network configuration and identify potential security risks. With Sophos Enterprise Console auditing, you can:
- Track changes to user accounts and groups
- Monitor changes to security policies
- Identify unauthorized access to sensitive data
- Investigate security incidents
- Comply with regulatory requirements
Reklamë
Reklamë
Sophos Enterprise Console
Auditing user guide
Product version:
Document date:
5.4
April 2016
2
Contents
6.2 Grant access to the audit data using SQL Server Management Studio...................11
8.4 Create a report containing policy changes in an XML format...................................22
3
4
Sophos Enterprise Console
1 About this guide
This guide describes how to use the auditing feature in Sophos Enterprise Console to monitor changes in Enterprise Console configuration and other user or system actions. It is intended for use by system administrators and database administrators.
It is assumed that you are familiar with and already using Sophos Enterprise Console (SEC).
Sophos documentation is published at http://www.sophos.com/en-us/support/documentation .
Auditing user guide
2 About Sophos Auditing
Sophos Auditing enables you to monitor changes in Enterprise Console configuration and other user or system actions.You can use this information for regulatory compliance and troubleshooting or, in the case of malicious activity, during a forensic analysis.
By default, auditing is disabled. After you enable auditing in Enterprise Console, an audit entry is written to the SQL Server database SophosSecurity whenever certain configuration settings are changed or certain actions are performed.
The audit entry includes the following information:
■
Action performed
■
■
User who performed the action
User's computer
■
■
User's sub-estate
Date and time of the action
Both successful and failed attempts at actions are audited, so the audit entries can show who performed actions on the system and who started actions that did not complete successfully.
You can use third-party programs, such as Microsoft Excel, Microsoft Access, Microsoft SQL
Server Reporting Services, or Crystal Reports, to access and analyze data stored in the auditing database.
Important: Sophos Auditing makes data available to third-party applications. By using this feature you assume the responsibility of the security of the data made available, which includes ensuring
(page 7).
For more information about what actions are audited, see What actions are audited?
5
6
Sophos Enterprise Console
3 Key steps in using Sophos Auditing
The key steps in using Sophos Auditing are:
■
Ensure the database is secure
■
■
■
Enable auditing
Grant access to the audit data
Create an audit report
Auditing user guide
4 Ensure the database is secure
4.1 Built-in database protection
Enterprise Console and the SophosSecurity database provide several built-in types of protection for the audit data:
■
■
Access control
Tamper protection
Access control
Access control is implemented at the following levels:
■
Front-end graphical user interface (GUI) level
Only users who have the Auditing right in Enterprise Console and are members of the Sophos
Console Administrators group can enable or disable auditing.
■
Database level
By default, only users who are members of the Sophos DB Admins group can access the database interfaces. In addition, the stored procedures from the database interfaces require a valid user session token to be presented. The token is generated by the system when a user opens the GUI or changes the sub-estate.
Tamper protection
The database is designed to prevent changes to the audit event data. There is no need to update any data in the auditing database, apart from certain configuration settings. There are triggers which would roll back any attempts to update or delete data from the tables.
The data can only be deleted by purging the database. Data that is more than two years old is purged automatically every 24 hours as part of the standard embedded scheduled purge task on the Enterprise Console server. You can also use the PurgeDB tool to purge the data (see http://www.sophos.com/en-us/support/knowledgebase/109884.aspx
).
4.2 Enhance database security
Audit the database
In addition to the protection built into the Enterprise Console databases, we recommend setting additional protection at the SQL Server instance level (if not already in place) to audit user activities and changes on your SQL Server.
7
Sophos Enterprise Console
For example, if you are using an Enterprise edition of SQL Server 2008, you can use the SQL
Server Audit feature. Earlier versions of SQL Server support login auditing, trigger-based auditing, and event auditing by using a built-in trace facility.
For more information about features that you can use for auditing activities and changes on your
SQL Server system, see the documentation for your version of SQL Server. For example:
■
■
■
■
SQL Server Audit (Database Engine)
Auditing (Database Engine), SQL Server 2008 R2
Auditing in SQL Server 2008
Auditing (Database Engine), SQL Server 2008
Encrypt connections to the database
We strongly recommend that you encrypt connections between any clients and the Enterprise
Console databases. For more information, see the SQL Server documentation:
■
■
■
Enable Encrypted Connections to the Database Engine (SQL Server Configuration Manager)
Encrypting Connections to SQL Server 2008 R2
How to enable SSL encryption for an instance of SQL Server by using Microsoft Management
Console
Control access to the database backups
Ensure proper, restrictive access control to any database backups or copies. This will ensure that unauthorized users cannot access the files, tamper with them, or accidentally delete them.
Note: The links in this section lead to information maintained by third parties and are provided for your convenience. Although we try to review the accuracy of the links periodically, the links may change without our knowledge.
8
Auditing user guide
5 Enable Sophos Auditing
By default, auditing is disabled. To enable auditing:
1. In Enterprise Console, on the Tools menu, click Manage Auditing.
2. In the Manage Auditing dialog box, select the Enable auditing check box.
Note: If the option is grayed out, this means that you don't have permission to manage auditing.
You must be a member of the Sophos Console Administrators group and have the Auditing right in Enterprise Console to enable or disable auditing. For more information about user rights and role-based administration, see the Sophos Enterprise Console Help.
9
Sophos Enterprise Console
6 Grant access to the audit data
By default, only system administrators can access the audit data. Other users who need to access the data to create audit reports will need to be explicitly granted "Select" permission on the schema
Reports in the database SophosSecurity. This can be done using the sqlcmd utility or in the
SQL Server Management Studio.
6.1 Grant access to the audit data using the sqlcmd utility
To grant access to the audit data:
1. Copy the following script snippet to a document, for example, a Notepad file.
USE SophosSecurity;
DECLARE @stmt NVARCHAR(max);
DECLARE @Account VARCHAR(512)
/* Replace <Domain>\<User> with the actual account name for which to
grant access to the audit data. */
SET @Account = N'<Domain>\<User>'
IF NOT EXISTS( SELECT * FROM sys.server_principals WHERE name =
@Account )
BEGIN
SET @stmt = N'CREATE LOGIN [' + @Account + N'] FROM WINDOWS';
EXEC sp_executesql @stmt;
END;
IF NOT EXISTS( SELECT * FROM sys.database_principals WHERE name =
@Account )
BEGIN
SET @stmt = N'CREATE USER [' + @Account + N'] FOR LOGIN [' +
@Account + N']';
EXEC sp_executesql @stmt;
END;
SET @stmt = N'GRANT SELECT ON SCHEMA :: [Reports] TO [' + @Account
+ N']';
EXEC sp_executesql @stmt;
GO
10
Auditing user guide
2. Replace the <Domain> and <User> placeholders in the statement "SET @Account =
N'<Domain>\<User>'" with the domain and username of the user to whom you want to grant access.
If your computers are in a workgroup, replace <Domain> with the name of the computer where the database is installed. If the user will be accessing the data from a different workgroup computer, the user account must exist on both computers, with the same username and password.
3. Open the command prompt.
4. Connect to the SQL Server instance. Type: sqlcmd -E -S <Server>\<SQL Server instance>
The default SQL Server instance is SOPHOS.
5. Copy the script snippet from the file and paste it into the command prompt.
6. Press Enter to run the script.
After the script runs, the user is granted "Select" permission on the Reports schema of the
SophosSecurity database and can access the audit data.
7. Repeat for each user who needs access.
6.2 Grant access to the audit data using SQL Server
Management Studio
Before you can grant "Select" permission on the schema Reports in the database SophosSecurity to a user in SQL Server Management Studio, ensure that the user has a SQL Server login and is a SophosSecurity database user.
■
If the user already has a SQL Server login, add it as a SophosSecurity database user. In Object
Explorer, expand the server, expand the Databases folder, expand SophosSecurity, and then expand Security. Right-click Users and click New User. In the Database User dialog box, enter the user name and select the login name. Click OK.
For more information about creating database users, see http://msdn.microsoft.com/en-us/library/aa337545.aspx#SSMSProcedure .
■
If the user doesn't have a SQL Server login, add a new SQL Server login and make it a
SophosSecurity database user. In Object Explorer, expand the server, expand Security.
Right-click Logins and click New Login. In the Login dialog box, on the General page, enter the account or group name. Go to the User Mapping page and select SophosSecurity. Click
OK.
For more information about creating SQL Server logins, see http://msdn.microsoft.com/en-us/library/aa337562.aspx#SSMSProcedure .
To grant access to the audit data to a user, in SQL Server Management Studio:
1. In Object Explorer, expand the server, expand the Databases folder, expand SophosSecurity, expand Security, and then expand Schemas.
2. Right-click Reports and click Properties.
11
Sophos Enterprise Console
3. In the Schema Properties - Reports dialog box, on the Permissions page, click Search. In the Select Users or Roles dialog box, add a user or users.
4. For each user, in the Permissions for <user> section, on the Explicit tab, select Select under
Grant, and then click OK.
12
Auditing user guide
7 Create an audit report in Microsoft Excel
This example shows you how to import audit data from the SQL Server database and analyze the data in Microsoft Excel 2010.
The following sections describe how to create an audit report in Microsoft Excel by following these key steps:
■
■
■
■
Set up a connection to the auditing database (create a new data source).
Create a query in Microsoft Query.
Return data to Excel.
Create a report in Excel (a table or a PivotTable report).
Note: We recommend using numeric IDs instead of string values if you want to bind any external logic to exported audit data. For example, instead of using values from the TargetType field, use the values from the TargetTypeId field. This will help to avoid potential compatibility issues should any string values change in a future release of Enterprise Console. For a table of numeric IDs, see
Appendix: Numeric IDs of the data field values (page 32).
For more information about importing SQL Server data and creating reports in Excel, see Microsoft documentation.
7.1 Set up a connection to the database
First, you need to connect to the database.
1. Open Excel. On the Data tab, in the Get External Data group, click From Other Sources, and then click From Microsoft Query.
The Choose Data Source dialog box appears.
2. On the Databases tab, leave <New Database Source> selected and click OK.
3. In the Create New Data Source dialog box, type the name you want to give your data source.
In this example, we call it SophosAuditing.
13
Sophos Enterprise Console
4. In the Select a driver for the type of the database you want to access box, select SQL
Server.
Click Connect.
5. In the SQL Server Login dialog box, in the Server box, enter the name of the SQL Server that you want to connect to.
In this example, we are connecting to the SOPHOS database instance on the same computer
(localhost).
6. Click Options to expand the Options panel. In the Database box, select SophosSecurity.
14
Click OK.
Auditing user guide
7. In the Create New Data Source dialog box, under Select a default table for your data
source (optional), select vAuditEventsAll.
Click OK.
7.2 Create a query
This example shows how to query the data source you just created for the information about changes to the Data Control policies over the past three months.
1. In the Choose Data Source dialog box, clear the Use the Query Wizard to create/edit
queries check box.
2. Select the data source you created in the previous steps (in this example, SophosAuditing) and click OK.
The Microsoft Query dialog box displays Query from SophosAuditing with the default table,
vAuditEventsAll, which you selected when you created the data source.
3. Do one of the following:
■
Create a query in the design view.
1. In the Microsoft Query dialog box, on the Criteria menu, click Add Criteria.
2. In the Add Criteria dialog box, next to Field, select Timestamp. Ensure that the
Operator field is blank. In the Value field, type:
>=DATEADD(mm,-3,GETUTCDATE())
Use the list separator specified in Region and Language settings in Control Panel. For example, if your list separator is a semicolon, use semicolons instead of commas in the statement above. You may receive the error message "Extra ')'" if you use an incorrect list separator.
Click Add. The criterion is added to Query from SophosAuditing.
3. In the Add Criteria dialog box, next to Field, select TargetType. In the Operator field, select equals. In the Value field, select or type Policy.
Click Add. The criterion is added to Query from SophosAuditing.
4. In the Add Criteria dialog box, next to Field, select TargetSubType. In the Operator field, select equals. In the Value field, select or type Data control.
Click Add. The criterion is added to Query from SophosAuditing.
In the Add Criteria dialog box, click Close.
5. In the Microsoft Query dialog box, add fields from vAuditEventsAll to the query by double-clicking on them. Alternatively, you can add a field to the query by dragging it from the table to the display area.
15
Sophos Enterprise Console
■
Create a query in the SQL view.
1. In Microsoft Query, click the SQL button and type your SQL statement, for example:
SELECT EventId, Timestamp, UserName, HostIPAddress, Action,
TargetName, ParameterType, ParameterValue, Result
FROM SophosSecurity.Reports.vAuditEventsAll
WHERE (Timestamp>=DATEADD(mm,-3,GETUTCDATE()))
AND (TargetType='Policy')
AND (TargetSubType='Data control')
ORDER BY EventId ASC
Click OK.
16
4. To save the query, on the File menu, click Save.
Auditing user guide
7.3 Return data to Excel
1. To return to Excel, in the Microsoft Query dialog box, click the Return Data button.
Alternatively, on the File menu, click Return Data to Microsoft Excel.
Back in Excel, the Import Data dialog box appears, where you can choose which type of report to create.
The following examples show how to:
■
(page 17)
■
(page 18)
7.4 Create a table
1. If you chose to import the audit data into an Excel table, in the Import Data dialog box, leave
Table selected.
To place the data in the existing worksheet starting at cell A1, leave Existing worksheet selected:
Click OK.
The audit data is imported into an Excel table.
2. Save your Excel workbook.
17
Sophos Enterprise Console
3. You can use the search filter to analyze your data.
7.5 Create a PivotTable report
1. If you chose to import the audit data into an Excel table, in the Import Data dialog box, select
PivotTable Report.
To place the data in the existing worksheet starting at cell A1, leave Existing worksheet selected:
18
Click OK.
The resulting, empty PivotTable appears in the worksheet.
Auditing user guide
2. In the PivotTable Field List that appears on the right, select the fields you want to view.
Tip: You can filter data before you add fields. In the PivotTable Field List, in the Choose
fields to add to report box, rest the pointer on a field name, and then click the filter drop-down arrow next to the field name. On the Filter menu, select the filter options that you want.
3. Depending on how you want your PivotTable to be displayed, drag the fields between the areas in the PivotTable Field List. For example, you may decide to display the names of the users and the policies that they touched as row labels and actions that the users performed on policies as column labels.
4. To be able to filter the PivotTable, under PivotTable Tools, Options, click Insert Slicer.
5. In the Insert Slicers dialog box, select the slicers you want to use and click OK.
You can re-arrange the slicers on the worksheet by selecting a slicer and dragging and dropping it at a desired position. You can also customize your slicers, for example, by giving them different colors. To do this, select a slicer. Under Slicer Tools, Options, select one of the
Slicer Styles.
Your PivotTable may look like this:
6. Save your workbook.
19
Sophos Enterprise Console
8 More examples of creating an audit report
This section tells you how to create a new query from an existing data source in Microsoft Excel and gives you more examples of the queries you can use to create audit reports.
The section also tells you how to create a report containing detailed policy changes in an XML format.
8.1 Create a query from an existing data source
To create another audit report from the data source you created in
Set up a connection to the database
(page 13):
1. In Excel, go to the Data tab, click From Other Sources, and then click From Microsoft Query.
2. In the Choose Data Source dialog box, clear the Use the Query Wizard to create/edit
queries check box. Select the data source you created previously (for example, SophosAuditing) and click OK.
3. In Microsoft Query, click the SQL button and enter a SQL statement for your report.
The following section contains some examples you can use.
8.2 More examples of queries
Example 1: Which policies a certain person changed over the past 60 days
SELECT EventId, Timestamp, TargetSubType, Action, TargetName,
ParameterType, ParameterValue, Result
FROM SophosSecurity.Reports.vAuditEventsAll
WHERE (Timestamp>=DATEADD(dd,-60,GETUTCDATE()))
AND (TargetType='Policy')
AND (UserName='GS22K8R264\Administrator')
ORDER BY Timestamp DESC
Note: In a statement, instead of listing the fields you want to include in the report, you can type
"SELECT *" to select all fields in the database view.
20
Auditing user guide
Example 2: Which policies were applied to a certain group in the past six months
SELECT *
FROM SophosSecurity.Reports.vAuditEventsAll
WHERE (Timestamp>=DATEADD(mm,-6,GETUTCDATE()))
AND (TargetType='Policy')
AND (Action='Assign')
AND (ParameterType='Group')
AND (ParameterValue='\Oxford\UK-Servers')
ORDER BY EventId DESC
Note: If the group for which you are creating a report is a subgroup of another group, you will need to either type the full path to the group or use the "ends with" statement (provided the name of the group is unique). For example, to create a report for the group \Oxford\UK-Servers, you can type either of the following:
■
ParameterValue='\Oxford\UK-Servers'
■
ParameterValue Like '%UK-Servers'
Example 3: What group changes were made by a certain person over the past three months
The following statement will result in a report showing what groups were created, deleted, moved or renamed and what computers were assigned to groups by the user in the past three months.
SELECT *
FROM SophosSecurity.Reports.vAuditEventsAll
WHERE (Timestamp>=DATEADD(mm,-3,GETUTCDATE()))
AND (UserName='GS22K8R264\Administrator')
AND ((TargetType='Group') OR ((TargetType='Computer') AND
(Action='Assign')))
Example 4: What changes were made to a certain group over the past three months
SELECT *
FROM SophosSecurity.Reports.vAuditEventsAll
WHERE (Timestamp>=DATEADD(mm,-3,GETUTCDATE()))
AND (ParameterValue='\Oxford\UK-Desktops')
21
Sophos Enterprise Console
8.3 Return data to Excel
After you have created a query for your audit report, return data to Excel (File > Return Data to
Microsoft Excel) and create a report as described in Create a table
8.4 Create a report containing policy changes in an XML format
When a user edits a policy, the resulting policy settings are saved in an XML format and can be accessed via the Reports.vAuditEventsForPolicyEditAndDuplicate database view.
You can create a report containing this additional data by linking the two tables,
Reports.vAuditEventsAll and Reports.vAuditEventsForPolicyEditAndDuplicate.
2. In Microsoft Query, click Table and then click Add Tables. In the Add Tables dialog box, select vAuditEventsForPolicyEditAndDuplicate and click Add. Once done, click Close.
3. Link the tables to each other by linking the fields that are common to both tables. Click on the common field, EventID, in the first table and drag the mouse over to the EventID field in the second table.
22
Auditing user guide
4. Add fields to the query by double-clicking on them. Alternatively, you can add a field to the query by dragging it from the table to the display area.
Tip: You can use the Joins dialog in Microsoft Query (Table > Joins) to create a query joining the two tables.
5. To save the query, on the File menu, click Save.
6. To return to Excel, click the Return Data button.
Alternatively, on the File menu, click Return Data to Microsoft Excel.
Back in Excel, the Import Data dialog box appears. Create a table ( Create a table
(page 17)).
The PolicyContent column will contain the policy configuration changes in XML format.
Tip: If you use Microsoft SQL Server Management Studio, you can query the
Reports.vAuditEventsForPolicyEditAndDuplicate view directly. Then, when you follow a link in the PolicyContent column in the query results, the policy content will be displayed in an XML editor in a format more readable than that in an Excel table.
23
Sophos Enterprise Console
24
9 What actions are audited?
Categories of audited actions include:
■
Computer actions
■
■
Computer group management
Policy management
■
■
■
Role management
Sophos Update Manager management
System events
9.1 Computer actions
The following computer actions are audited:
■
Acknowledge/resolve alerts and errors
■
■
Protect a computer
Update a computer
■
■
Delete a computer
Perform a full system scan on a computer
9.2 Computer group management
The actions logged for group management are:
■
Create a group
■
■
Delete a group
Move a group
■
■
Rename a group
Assign a computer to a group
9.3 Policy management
The actions logged for policy management are:
■
■
■
Rename a policy
(page 25)
Auditing user guide
■
■
■
■
Edit a policy
Assign a policy to a computer
Reset a policy to factory defaults
(page 25)
9.3.1 Create a policy
When you create a new policy, the default policy is duplicated into a new policy named "New
Policy". You can rename the new policy immediately after it has been created. For example, if you create a new Anti-Virus and HIPS policy and rename it to "Servers", the following audit entries will be created:
Table 1: Create a new policy and give it a new name
Action
Duplicate
Rename
Target Type Target
SubType
Policy
Policy
Target Name Parameter
Type
Parameter
Value
Result
Anti-virus and
HIPS
Default New name
Anti-virus and
HIPS
New Policy New name
New Policy
Servers
Success
Success
9.3.2 Duplicate a policy
When you duplicate a policy, a "Duplicate a policy" event is created, for example:
Table 2: Duplicate a policy
Action
Duplicate
Target Type Target
SubType
Policy Web Control
Target Name
TestPolicy1
Parameter
Type
New name
Parameter
Value
Result
Copy of
TestPolicy1
Success
9.3.3 Delete a policy
When you delete a policy, any groups that use the deleted policy will revert to using the default policy. In this case, no separate audit event is created that shows that the default policy has been reapplied.
25
Sophos Enterprise Console
26
9.4 Role management
The actions logged for role management are:
■
Create a role
■
■
Delete a role
Rename a role
■
■
■
■
■
Duplicate a role
Add a user to a role
Remove a user from a role
Add a right to a role
Remove a right from a role
9.5 Sophos Update Manager management
The actions logged for Sophos Update Manager management are:
■
Update an update manager
■
■
Make an update manager comply with configuration
Acknowledge alert
■
■
Delete an update manager
Configure an update manager
9.5.1 How changes in Update Manager configuration are recorded
In Enterprise Console, the Configure update manager dialog box contains a number of tabs and configuration options that are essentially the update manager's configuration policies. When you edit the update manager's configuration, actions are logged against the following policies:
■
■
Update Manager - subscription - specifies software subscriptions that the update manager keeps up to date.
Update Manager - upstream - specifies the update source for the update manager.
■
■
■
Update Manager - downstream - specifies shares where the update manager downloads the software.
Update Manager - schedule - specifies how often the update manager checks for threat detection data and software updates.
Update Manager - general - specifies logging options for the update manager.
■
Software subscription - specifies configuration of a software subscription, for example,
"Recommended".
Sometimes changes in one update manager policy cause changes in other update manager policies (such as parameter ID value changes). In such cases, you will see several records in
Auditing user guide
SophosSecurity database for one change you made. For example, if you create a schedule on the Schedule tab of the Configure update manager dialog box and click OK, the following audit entries will be created:
Table 3: Create an Update Manager's update schedule
EventId Action
22
21
20
Edit
Edit
Edit
Target
Type
Policy
Policy
Policy
Target
SubType
Target
Name
Update
Manager schedule
Update
Manager upstream
Update
Manager subscription
New name
New
Policy
Parameter
Type
Parameter
Value
Result
None Success
None
None
Success
Success
In this case, only the first action, logged for the Update Manager - schedule policy, results in a real configuration change. The rest of the policy changes logged for this event are internal parameter ID changes. To check what the changes are, you can use the
Reports.vAuditEventsForPolicyEditAndDuplicate view of the SophosSecurity database, as described in
Create a report containing policy changes in an XML format (page 22).
9.6 System events
The following system events are audited:
■
Enable auditing
■
Disable auditing
27
Sophos Enterprise Console
28
10 Sophos Auditing data fields
The following database views, or data sources, are available for Sophos Auditing:
■
Reports.vAuditEventsAll
■
Reports.vAuditEventsForPolicyEditAndDuplicate
The data fields available for each of these data sources are listed below. All date-time columns are returned in UTC in the format "yyyy-mm-dd hh:mi:ss" (24 hours). The fields common to both views are highlighted in bold.
Reports.vAuditEventsAll
The Reports.vAuditEventsAll database view contains the full list of audit events and most of the audit information.
Data field
EventId
Timestamp
Action
TargetType
TargetSubType
TargetName
ParameterType
Data type integer datetime nvarchar(128) nvarchar(128) nvarchar(128) nvarchar(4000) nvarchar(128)
Description
A unique numeric ID of the event.
The time when the action logged in the event took place.
The action logged in the event, for example, Create,
Edit, Rename, Assign, Delete.
The type of the object or configuration setting modified by the action, for example, Group,
Computer, Policy, Role.
The subtype of the object or setting modified by the action, where applicable. For example, the name of the modified policy, such as Anti-virus and HIPS or
Data control.
The name of the object or setting modified by the action, for example, the user-defined name of the policy or group.
The type of the new setting or object assigned to the target. For example, for Action="Rename" and
TargetType="Policy", ParameterType="New name".
For Action="Assign" and TargetType="Computer",
ParameterType="Group".
Auditing user guide
Data field
ParameterValue
Result
UserName
HostName
HostIPAddress
ActionId
TargetTypeId
TargetSubTypeId
ParameterTypeId
SubEstateId
ResultId
UserSid
Data type nvarchar(4000) nvarchar(128) nvarchar(256) nvarchar(256) nvarchar(48) integer integer integer integer integer integer nvarchar(128)
Description
The value of the new setting or object, for example, the new user-defined name of the policy, or the new group the computer has been assigned to.
The result of the action; has the value "Success" or
"Failure".
The name of the user who carried out the action.
The name of the computer from which the user carried out the action.
The IP address of the computer from which the user carried out the action. If network connections between the server and Enterprise Console are made over IPv6, then IPv6 addresses will be recorded.
Otherwise, IPv4 addresses will be recorded.
A unique numeric ID of the action.
A unique numeric ID of the target type.
A unique numeric ID of the target subtype.
A unique numeric ID of the parameter type.
A unique numeric ID of the user's sub-estate.
A unique numeric ID of the result, 1 (success) or 0
(failure).
The user's security identifier.
Reports.vAuditEventsForPolicyEditAndDuplicate
The Reports.vAuditEventsForPolicyEditAndDuplicate database view contains information about policy changes.
Data field
EventId
Data type integer
Description
A unique numeric ID of the event.
29
Sophos Enterprise Console
Data field
Timestamp
Action
Result
PolicyType
PolicyName
PolicyContent
UserName
Data type datetime nvarchar(128) nvarchar(128) nvarchar(128) nvarchar(4000)
XML nvarchar(256)
Description
The time when the action logged in the event took place.
The action logged in the event.
The result of the action; has the value "Success" or "Failure".
The type of the policy changed by the action, for example, Anti-virus and HIPS or Web control.
The user-defined name of the policy.
The snippet of the policy configuration changes, in XML format.
The name of the user who carried out the action.
30
Auditing user guide
11 Troubleshooting
When Sophos Auditing fails, an event is logged in the Windows Application Event Log with the source "Sophos Auditing". This usually happens when there is a database connectivity problem.
31
Sophos Enterprise Console
12 Appendix: Numeric IDs of the data field values
The following tables show unique numeric IDs of some of the Sophos Auditing data field values.
We recommend using these numeric IDs instead of string values if you want to bind any external logic to exported audit data. This will help to avoid potential compatibility issues should any string values change in a future release of Enterprise Console.
Data field
Action
Data field value
Unknown
Create
Delete
Duplicate
Move
Rename
Add to
Remove from
Edit
Log on
Update
Acknowledge
Reset
Assign
Protect
Scan
Numeric ID
3
4
5
0
1
2
8
9
6
7
13
14
15
10
11
12
32
Auditing user guide
Data field Data field value
TargetType
Clean up
Comply
Unknown
Group
Role
Policy
Computer
Sub-estate
AD synchronization point
Report
Update manager
Configuration
TargetSubType for TargetType=Policy Legacy updating
Anti-virus and HIPS
Firewall
Application control
NAC
Update Manager - upstream
Update Manager - downstream
Update Manager - general
Update Manager - subscription
Update Manager - schedule
Data control
Numeric ID
8
9
10
2
4
7
13
15
11
12
4
5
6
2
3
16
17
0
1
9
1
7
8
33
Sophos Enterprise Console
Data field
TargetSubType for
TargetType=Configuration
ParameterType
Result
Data field value
Device control
Software subscription
Updating
Tamper protection
Web control
Unknown
Dashboard
Email alerts
Purge
Auditing
None
New name
New location
Group
User/Group
Right
Computer
Alert
Error
Software update alert
Configuration value
Pending
Success
34
Numeric ID
6
7
8
3
4
5
0
1
9
10
1
2
3
22
0
16
17
18
19
1
2
4
0
Data field Data field value
Failure
Auditing user guide
Numeric ID
2
35
Sophos Enterprise Console
13 Technical support
You can find technical support for Sophos products in any of these ways:
■
Visit the Sophos Community at community.sophos.com/ and search for other users who are experiencing the same problem.
■
■
■
Visit the Sophos support knowledgebase at www.sophos.com/en-us/support.aspx
.
Download the product documentation at www.sophos.com/en-us/support/documentation.aspx
.
Open a ticket with our support team at https://secure2.sophos.com/support/contact-support/support-query.aspx
.
36
Auditing user guide
14 Legal notices
Copyright
©
2013–2016 Sophos Limited. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.
Sophos, Sophos Anti-Virus and SafeGuard are registered trademarks of Sophos Limited, Sophos
Group and Utimaco Safeware AG, as applicable. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
37
Shkarko
Lidhja publike u përditësua
Lidhja publike për bisedën tuaj është përditësuar. You may view and manage your chat links after registration here.
Lidhja publike e dokumentit
Reklamë
