INDUSTRIES COSMETIC CHEMICAL www.eu.fishersci.com 1 INDEX SAMPLING SAMPLERS 3-4 SAMPLING VESSELS 4-6 SAMPLE STORAGE 6-8 SOLID PHASE EXTRACTION SAMPLE PREPARATION CENTRIFUGATION 14 HOMOGENISATION 16 17-18 FILTRATION HYGIENE, DISINFECTION AND PROTECTION ESSENTIALS CHROMATOGRAPHY LIFE SCIENCE APPLICATIONS 2 8-10 19 INCUBATORS SAFETY PROTECTION 20-22 VISCOMETERS, BATHS, CHILLERS 23-24 COLORIMETERS, MELTING POINT APPARATUS 25 BALANCES 28 MOISTURE ANALYSERS, TITRATORS 29 REFRACTOMETERS, BOD, OXIDATION 30 KJELDAHL APPARATUS, FURNACES, MICROSCOPES 31 OVENS, ENVIRONMENTAL CHAMBERS, PUMPS 32 PUMPS, THERMOMETERS, TIMERS 33 TIMERS, ULTRAPURE WATER SYSTEM 34 PAPER, COLUMNS, SOLVENTS, VIALS 36 PETRI DISHES, BACTERIOLOGY LOOPS 36 SWABS, BIOLOGICAL SAFETY CABINETS , MICROTUBES 37 EVAPORATORS, ULTRASONIC BATHS 38 www.eu.fishersci.com SAMPLING SAMPLERS SPATULAS, STERILE SAMPLE SPOONS, STERILE • Polystyrene, white • Individually packaged and sterilised by gamma radiation • Production, assembly and packaging according to cleanroom Class 7 • With EU foodstuffs and FDA approval • Available with or without transparent cover to ensure samples are not contaminated • Ideal for powders, granulates and pastes • Polystyrene, white • Individually packaged and sterilised by gamma radiation • Production, assembly and packaging according to cleanroom Class 7 • With EU foodstuffs and FDA approval • Ideal for powders, granulates and pastes. Cat No. Description Pack qty Cat No. Capacity, mL Pack qty 15336327 Spatula SteriPlast 10 15356327 2,5 100 15346327 Spatula SteriPlast with cover 10 15351766 10 100 SCOOPS, STERILE SPOONS, STERILE • Polystyrene, white • Individually packaged and sterilised by gamma radiation • Production, assembly and packaging according to cleanroom Class 7 • With EU foodstuffs and FDA approval • Ideal for powders, granulates and pastes • Available with or without transparent cover to ensure samples are not contaminated • Polystyrene, white • Traceability on each bag • Certifications: EC N°1935/2004, ISO 11137 • Individual packaging Cat No. Capacity, mL Pack qty Without cover Cat No. Capacity, mL Length, mm Pack qty 15366317 25 10 11847363 2 125 1000 15386317 50 10 11713114 8 150 1000 15306327 100 10 15316327 150 10 With cover 15376317 25 10 15396317 50 10 15390937 100 10 SCOOPS TWEEZERS • Made from food safe polypropylene • Top is flat for levelling off powders • Base is flat enabling scoops to stand horizontally • The capacity is clearly moulded on each size • High quality, autoclavable tweezers • Available with pointed or rounded ends • Fine tooth grips for secure handling of samples Cat No. Capacity, mL Length, mm Pack qty Cat No. Description Material Length, mm Pack qty 12591506 2 60 5 12054618 Pointed ends PMP white 115 1 160 5 12043984 Rounded ends POM amber 250 1 11323724 50 www.eu.fishersci.com 3 SAMPLING SAMPLERS SAMPLERS, MINI VISCOSAMPLERS SCOOPS Sampler for viscous substances such as pastes, mud, creams, oils. The sample is drawn in using the pump rod and directly conveyed to the sampling container. • Stainless steel V4A (1.4404), seals PTFE • Sterilisable • Ideal for the pharmaceutical and cosmetics industry • Including suction tip 2mm • Additional suction tips (2mm; 4mm; 6mm) available • 15mm diameter Cat No. 10461341 Capacity, mL Length, mm 30 100 Cat No. Capacity, mL Length, mm Pack qty 11921581 10 34 1 10503252 100 65 1 Pack qty 10403522 250 95 1 1 10044067 500 125 1 10683523 1000 155 1 10461151 50 600 1 10421731 75 1500 1 SCREW CAP DIPPERS WITH REMOVABLE HANDLE SAMPLE DIPPERS, STERILE, THERMO SCIENTIFIC STERILIN DIPPA™ • Polypropylene blue containers • Removable handle • Shock resistant • Packaged individually in tamper evident single zip bags • Traceability information on each bag • Sterile SAL 10 -3 • Polystyrene • With caps • Facilitate sample collection and transportation to the lab in a single container using Thermo Scientific™ Sterilin™ Dippas™ to reduce risk of cross-contamination • Individual packaging Capacity, mL Height with caps, mm Height with handle, mm Outer diameter, mm Pack qty 15488794 40 80 290 43 250 15408804 125 74 275 52 250 15498794 180 102 305 52 250 Cat No. • PTFE, white • All parts coming into contact with the sample medium are made of pure white PTFE • Completely inert against all substances (with the exception of elementary fluoride) • Autoclavable Cat No. Capacity, mL Colour Handle length, mm Pack qty 11729352 30 Clear 200 50 11788848 100 Clear 385 400 11748938 250 Clear 330 50 11738938 30 Blue 200 50 11798848 100 Blue 385 100 11758938 250 Blue 330 50 Cosmetic Industry – Is water quality important to your process? Our Water Analysis brochure features a comprehensive range of high quality and reliable products to collect, store and prepare your sample. APPLICATIONS & SOLUTIONS SERIES: WATER ANALYSIS Discover how you can validate a large range of parameters during all steps of your processes. Available on eu.fishersci.com 4 www.eu.fishersci.com SAMPLING VESSELS BEAKERS WITH HANDLE GRADUATED BEAKERS, DISPOSABLE • Four-way pour spout for flexibility • Polystyrene • Chemical resistant to dilute or weak acids, aqueous solutions, alcohols, and bases •Withstand temperatures to 93°C (200°F) • Graduations in mL and oz., accurate to ±2% Cat No. Capacity, mL Pack qty 11738549 20 500 • Tapered jugs in high clarity polypropylene • Crisp blue printed graduations • Autoclavable at 121°C • Ergonomically designed handle with thumb grip for easy carrying • Polypropylene • For use in: laboratories for handling chemicals • This product is suitable for food contact applications in accordance with EU and\or USA regulations • Maximum Temperature: -20 to 135°C 11748549 50 500 11758549 150 100 Cat No. Capacity, mL Height, mm Pack qty 11768549 250 100 10667825 250 100 1 11778549 800 100 10074084 500 120 1 11788549 1000 100 11363434 1000 150 1 10718205 2000 187 1 11990985 3000 215 1 SQUARE BOTTLES SINGLE USE, WIDE NECK ROUND BOTTLES SINGLE USE, WIDE NECK • Single use, HDPE, square bottles • For research use only, unless otherwise indicated • Certifications: EC N°1935/2004 Cat No. Capacity, mL Sterile Dimensions, L x W x H,mm Closure type Neck diameter, mm • Single use, HDPE, round bottles • For research use only, unless otherwise indicated • Certifications: EC N°1935/2004 Pack qty Cat No. Capacity, mL Sterile Dimensions, L x W x H,mm Closure type Neck diameter, mm 300 11733024 100 No 51 x 51 x 80 Double closure: polyethylene 37 seal and screw cap 335 Pack qty 11793024 150 No 50 x 50 x 95 Double closure: polyethylene 37 seal and screw cap 11703034 150 No 50 x 50 x 95 Leakproof screw cap with tresylene seal 37 300 11743024 100 No 51 x 51 x 80 37 335 11713034 150 Yes 50 x 50 x 95 Double closure: polyethylene 37 seal and screw cap Leakproof screw cap with tresylene seal 300 11743064 250 No 60 x 60 x 125 Leakproof screw cap with tresylene seal 37 145 11753094 500 No 80 x 80 x 136 Leakproof screw cap with tresylene seal 37 140 95 x 76 x 185 Double closure: polyethylene 58 seal and screw cap 11778653 1000 No 101 x 101 x 174 Double closure: polyethylene seal and screw cap 68 95 x 76 x 185 Double closure: polyethylene 58 seal and screw cap 11788653 1000 Yes 101 x 101 x 174 Double closure: polyethylene seal and screw cap 68 95 x 76 x 185 Leakproof screw cap with tresylene seal 11798653 1000 No 101 x 101 x 174 Leakproof screw cap with tresylene seal 68 11728643 1000 11718653 11748653 1000 1000 No Yes No 58 90 90 90 www.eu.fishersci.com 5 SAMPLING SAMPLING VESSELS BOTTLES, WIDE MOUTH, HDPE, CLEAR BOTTLES, OCTAGONAL, PET • Leakproof • Higher temperature-use rating than LDPE - up to 120°C (248°F) for short periods and 110°C (230°F) for continuous use • Brittleness temperature at -100°C (-148°F) • Bottles may be radiation, EtO or chemically sterilised • Not autoclavable Cat No. Capacity, mL Dimensions, mm (dia. x h) Pack qty 11775243 30 36 x 64 72 11785243 60 38 x 86 72 • Transparent as glass • Molded with graduations every 25mL • HDPE Tamper evident screw cap • Highly ergonomic • Sterile 103 • Food contact compliant Cat No. Capacity, mL Sterile Dimensions, L x W x H,mm Closure type Neck diameter, mm Pack qty 12654853 125 Yes 53 x 53 x 108 Tamper evident screw cap 31,7 231 15370242 250 Yes 63 x 63 x 132 Tamper evident screw cap 31,7 144 15309094 500 Yes 74 x 74 x 170 Tamper evident screw cap 31,7 120 Yes 92,5 x 92,5 x 212 Tamper evident screw cap 31,7 48 12684853 1000 CONTAINERS, POLYPROPYLENE, SNAP CAP STRAIGHT CONTAINERS • Leakproof • No cross contamination risks • Assembled shape • Outside Diameter: 105mm • Height: 130mm • Colour: Natural • Certifications: EC N°1935/2004 • Material and colour of the container : Natural polypropylene • Material of the secondary body : LDPE • Shape : assembled • CE marking : CE, IVD • Food contact : Raw material is compliant with regulation EC N°1935/2004 when sterile : sterility Assurance Level based on ISO 11137 : STERILE SAL 10-3 Cat No. Capacity, mL Description Pack qty 11783154 960 Container cap separate 250 11703164 960 Cap on container - sterilised 80 Sterile Dimensions, dia. x height, mm Closure type Pack qty 15438814 60 Yes 33 x 70 Screw cap red 700 15458814 60 No 33 x 70 Screw cap blue 700 15468814 60 Yes 33 x 70 Screw cap red 700 15478814 60 No 33 x 70 Screw cap white 700 15468824 125 Yes 52 x 74 Screw cap red 380 15498824 125 No 52 x 74 Screw cap blue 380 15408834 125 No 52 x 74 Screw cap red 380 15418834 125 No 52 x 74 Screw cap white 380 Cat No. Capacity, mL SPECIMEN CONTAINERS SPECIMEN CONTAINERS • C ontainers with captive hinged cap suitable for many applications • Lightweight and unbreakable in normal use • Can withstand temperatures up to 80°C • Cap colour: clear • Clear polystyrene containers with maximum sample visibility • Polyethylene airtight snap-on lids for quick easy use Cat No. Capacity, mL Diameter, mm Height, mm Pack qty Cat No. Capacity, mL Diameter, mm Height, mm Pack qty 10135874 1 8 38 20 11323614 10 26 28 10 12783335 2,5 12 40 20 11333614 20 32 33 10 12453561 30 36 33 10 10739555 5 15 49 20 10717465 10 28 352 10 12463561 50 36 53 10 10584745 20 32 36 10 11353614 100 51 60 10 12793335 25 25 78 10 6 www.eu.fishersci.com SAMPLING VESSELS BOTTLES, SODA GLASS, STRAIGHT SIDED CONTAINER UNIVERSAL • Ideal for soil sampling and environmental applications. • Straight sided walls allow for the complete removal of contents • Bottles are autoclavable but the caps are not autoclavable • Bottles are packed with PTFE lined caps ready-fitted • Available certified cleaned per EPA guidelines for semivolatiles, pesticides, PBCs and metals. A certificate of analysis is attached to each lot • Safety coated bottles are ideal for field sampling applications. The shatter resistant coating reduces the chance of breakage in the event the container is dropped. If the bottle does break, the coating will safely contain the contents long enough for disposal. The non-slip coating also allows greater ease of stability in handling containers, whether wet or dry. Secure excellent temperature and chemical resistance with 95kPa compliant and CE marked 30mL leak-resistant Thermo Scientific™ Sterilin™ polypropylene 30mL universal container. Aseptically manufactured. Cat No. Capacity, mL Diameter, mm Height, mm Pack qty 12653546 30 31 94 400 Cat No. Capacity, mL Dia. x H, mm Thread style Mouth ID, mm Pack qty 11744339 500 91x 95 89/400 69,8 12 11754339 1000 95 x 170 89/400 74,1 12 BOTTLES, YOUTILITY LABORATORY TRAYS, ALL-PURPOSE The DURAN™ YOUTILITY Laboratory Bottle GL 45 represents a new generation of glass laboratory bottles for use in a wide and diverse range of applications. The innovation does not stop at the improved ergonomics bottle shape, but extends to dedicated accessories that incorporate many new innovative features to improve handling, sample identification, and ease of use. The new YOUTILITY bottles and accessories help to make laboratory work easier, safer, more economical and fun. • Complete bottle system - includes pouring ring, GL 45 screw cap • Clear glass • Specially shaped gripping zones on both sides of the bottle for easier and safer handling These laboratory trays are practical, all-purpose trays that can be nested when empty, and are durable, shatterproof and resist flexing. Also suitable as a spill trough for environmentally dangerous aggressive substances, for laboratory work, as an etching tray, as an instrument holder, a medicine tray, for photographic development, as a sample presentation tray or a display tray for foodstuffs. • Polypropylene, white • Manufactured using injection moulding, not by deep drawing • Trays can be nested • Tray not suitable for temperature controlled cupboards or dishwashers • Temperature resistant up to +60°C (briefly up to +80°C) Cat No. Capacity, mL Diameter, mm Height, mm Pack qty 15233375 125 55 124 4 15223375 250 66 158 4 15243375 500 78 193 4 15253375 1000 93 253 4 Cat No. Capacity, mL Dimensions, L x W, mm Pack qty 10130501 500 180 x 130 1 10028320 1500 240 x 180 1 PIPETTES GRADUATED, TYPE 1 CLASS SAMPLE BAGS STERIBAG SteriBag sterilised sampling bags are ideal for samples in chemistry, pharmaceuticals, medicine, veterinary science and foodstuffs. The bags are made of polyethylene and are therefore exceptionally tearproof and leakproof. • Sterilised • Can be labelled • Leakproof • Save space • Transparent • With practical tear-open closure • Proven millions of times • Complies with ISO 835 • Calibrated to deliver from zero at the top to any graduation line down to the shoulder • Graduations in permanent amber stain which resists aggressive washing solutions • Each pipette is calibrated to deliver with a +5s. waiting time • Manufactured from soda lime glass with tooled jets for extra strength and to ensure correct outflow times Cat No. Capacity, mL Tolerance, mL Colour code Pack qty 11359653 1 ±0,007 Yellow 2 Cat No. Capacity, mL Dimensions, L x W, mm Labelling area Pack qty 11379653 5 ±0,03 Red 2 10135550 60 127 x 76 No 500 11389653 10 ±0,03 Red 2 10607871 150 178 x 79 No 500 11399653 25 ±0,10 Green 2 10490951 450 229 x 114 No 500 10658251 650 229 x 140 No 500 10544021 900 305 x 114 No 500 15306297 1650 305 x 178 No 250 10724784 1650 305 x 178 Yes 250 www.eu.fishersci.com 7 SAMPLING SAMPLING VESSELS PIPETTES, POLYSTYRENE, STRAW, STERILE LIGHTWEIGHT FUNNELS, PP Manufactured from clear polystyrene, and sterilised at 10kGy, these straw pipettes are particularly suitable for use with Stomacher homogeniser bags • Lightweight polypropylene funnels with ribs that prevent air locks, allowing rapid filtration •Autoclavable to 121°C Cat No. Overall length, mm Overall height, mm Stem OD, at top, mm Top i.d., mm Pack qty 10233840 47 47 2 30 10 12024608 107 107 10 75 10 Cat No. Volume, mL Length, mm Inner pack qty Pack qty 11562772 1 190 25 1000 SAMCO™ GENERALPURPOSE TRANSFER PIPETTE PIPETTES, TRANSFER Prevent cross-contamination with Thermo Scientific™ Samco™ general purpose transfer pipettes, which have a built-in bulb that eliminates the need for plugging, packaging and autoclaving. Samco transfer pipettes are made of shatterproof, nontoxic polyethylene. Their low-affinity surface reduces loss of cells and valuable proteins due to binding. They can be frozen in liquid nitrogen, or heat sealed for storage. • Low density polyethylene • Transparent • Graduated or non-graduated • Various packaging formats Cat No. Description Length, mm Drop volume, mL Drop per mL Pack qty Cat No. 13439108 3mL, graduated 155 40 25 500 62 µL Large Aperture Pipette 13449108 7mL, non graduated 300 50 20 100 15337893 Length, cm 13,7 Stem diam., mm 6,1 Cat No. Overall capacity, mL Bulb Draw, mL Drops per mL Inner pack qty Pack qty Fine Tip Large Bulb 15337833 14,7 6,1 8,7 4,8 45 400 4000 Extended Fine Tip Small Bulb 15347823 8 10,4 3,0 1,5 1,0 50 400 Inner pack qty Pack qty 9,3 4,8 250 2500 Eliminate plugging, packaging and autoclaving with Thermo Scientific™ Samco™ special purpose transfer pipettes, ideal for delivering drops onto slides or tiles. Single-unit design features a built-in pipette bulb that eliminates need for plugging, packaging, autoclaving; prevents cross-contamination. Perform precise dispensing of small drops into small-volume containers using Thermo Scientific™ Samco™ Fine-Tip Transfer Pipettes. These fine-tip pipettes are ideal for removing cell layers and separating blood samples. Designed with a built-in pipette bulb, they allow precise dispensing of small drops into smallvolume containers. Length, Stem diam., cm mm Bulb Draw, mL SAMCO™ SPECIAL PURPOSE TRANSFER PIPETTES SAMCO™ FINE TIP TRANSFER PIPETTES Cat No. Overall capacity, mL 3200 Length, cm Stem diam., mm Overall capacity, mL Bulb Draw, mL Inner pack qty Pack qty 3,8 1,0 0,2 500 4000 3,8 1,0 0,2 500 4000 3,6 0,8 0,2 500 4000 Padl-Pet 25 µl Drop Size 15377873 13,1 Padl-Pet 30 µl Drop Size 15387873 13,0 Padl-Pet 50 µl Drop Size 15397873 12,4 www.eu.fishersci.com SAMPLING VESSELS Cat No. SAMCO™ EXTRA LONG TRANSFER PIPETTE SAMCO™ NARROW STEM TRANSFER PIPETTE Perform safe and easy sampling from large containers using Thermo Scientific™ Samco™ extra long transfer pipettes. Perfect for tissue culture applications, these pipettes are designed with a built-in pipette bulb that eliminates the need for plugging, packaging, autoclaving and prevents cross-contamination. Eliminate plugging, packaging and autoclaving with Thermo Scientific™ Samco™ narrow stem transfer pipettes.. These polyethylene pipettes prevent cross-contamination and are used for blood bank applications such as sedimentation procedures. The single-unit design features a built-in pipette bulb, and a flexible stem bends to sample from narrow or small tubes. Length, Stem diam., cm mm Overall capacity, mL Bulb Draw, mL Drops per mL Inner pack qty Pack qty 23,0 7,3 20 100 1000 Extra Long 12” 15242079 30,0 8,6 Cat No. Length, cm 11641839 15,5 Length, mm Type Inner pack qty Pack qty 150 Unplugged 250 1000 11566963 230 Unplugged 250 1000 Graduations, mL Colour Pack qty Pipettes individually wrapped plastic/plastic Pack qty 8,0 6,7 3,0 500 5000 Cat No. Capacity, mL Stem length, mm Total length, mm Pack qty 11393704 1,5 98 133 100 15573740 5 159 194 100 PIPETTES ONE MARK, CLASS AS • Complies with ISO 648 and DIN 12691 • Calibrated for delivery • Printed with batch code for downloadable batch certificate • Markings in permanent amber stain • Class AS with +5s waiting time • Manufactured from soda lime glass with robust tooled jets • Non-pyrogenic and non-cytotoxic warranty • DNase and RNase free • S upplied in paper/plastic packaging, or plastic/plastic packaging • Sterilisation using gamma irradiation • Pipettes individually wrapped paper/plastic Capacity, mL Inner pack qty • Corrosion resistant and unbreakable in normal use • Both sizes are one-piece bellows dispensers • Plain stem of 7,5 mm diameter PIPETTES, SEROLOGICAL, STRAIGHT, POLYSTYRENE, INDIVIDUALLY WRAPPED Cat No. Bulb Draw, mL DROPPING PIPETTES •D isposable Pasteur pipettes are open point and unplugged (plain) and manufactured from soda lime glass to BS 5732, ISO 7712 • Material: soda lime glass 11546963 Overall capacity, mL Q-Pet Transfer Pipette PIPETTES, PASTEUR, SODA LIME GLASS Cat No. Stem diam., mm Cat No. Capacity, mL Tolerance, mL Colour code Pack qty 11369643 1 ±0,008 Blue 2 11379643 2 ±0,01 Orange 2 11829660 5 0,1 Blue 200 11389643 5 ±0,015 White 2 11839660 10 0,1 Orange 200 11399643 10 ±0,02 Red 2 11309653 15 ±0,03 Green 2 Pipettes individually wrapped paper/plastic 11849181 1 0,01 Yellow 1000 11319653 20 ±0,03 Yellow 2 11859181 2 0,01 Green 500 11329653 25 ±0,03 Blue 2 11869181 5 0,1 Blue 200 11339653 50 ±0,05 Red 2 11879181 10 0,1 Orange 200 11349653 100 ±0,08 Yellow 2 11839181 25 0,2 Red 200 11889181 50 0,5 Purple 100 www.eu.fishersci.com 9 SAMPLING SAMPLING VESSELS PIPETTORS, MICROMAN E CAPILLARY PISTONS MICROMAN™ E positive displacement pipettes, along with capillary pistons, offer the highest precision when pipetting problem liquids such as oils, cosmetics, blood, glycerol, radioactive samples, RNA, DNA, and more! Working like a syringe, capillary pistons eliminate the air cushion between the sample and the disposable piston, providing 100% protection against pipette contamination and producing accurate, reproducible, and precise results every time. • Patented QuickSnap CP fitting system allows you to fit a capillary piston on to MICROMAN E as simply as fitting a standard tip to a standard pipette. • Volume Securing Button allows for easy volume adjustment and minimises the risk of accidently changing the volume during pipetting cycles. • Award Winning Design: MICROMAN E received the Red Dot Product Design Award 2015 for its unique design language in the Life Science and Medicine Category. • Improved comfort and ease-of-use: - A newly shaped handle, with an added finger hook, rests comfortably in your hand - Fully visible volumeter on the front of the body, so you can easily see the volume while pipetting - Large push button allows you to aspirate and dispense with ease • Accuracy & Precision - The use of Gilson’s pipetting system (MICROMAN fitted with Capillary Piston) guarantees accuracy and precision. - Ideal for non-aqueous liquids: viscous, dense, volatile or potentially dangerous liquids, radioactive or corrosive reagents. • Contamination Free - Contamination-free pipetting and protection for the user no contact between the sample and the pipette, even with aerosols or corrosive vapours. - Free of dyes, no risk of contamination from the CP’s components. • High Quality - Large volume range from 1 µL to 1000 µL with six different models to offer the best results. - Capillaries made of pure polypropylene. - Lightweight and slim CPs that fit in even the narrowest and deepest tubes. Cat No. Volume, µL Pack qty 12001532 1-10 960 10726470 3 - 25 960 10866510 20 - 50 960 Cat No. Min vol., µL Max vol., µL Pack qty 10494132 10 - 100 960 15314775 1 10 1 10456925 50 - 250 960 15324775 3 25 1 15334775 20 50 1 15344775 10 100 1 15354775 50 250 1 FINNPIPETTE™ F2 ADJUSTABLE-VOLUME PIPETTES PIPETTOR TIPS, THERMO SCIENTIFIC FINNTIP™ Eliminate the possible effects of hand warmth on the accuracy of measurements with Thermo Scientific™ Finnpipette™ F2 Adjustable-Volume Pipettes, which feature Advanced Volume Gearing (AVG) a thermally-isolated self-supporting modular volume adjustment mechanism that enhances pipetting performance. Because the AVG mechanism is separated from the pipette body, its accuracy and precision are significantly improved. • L arge Ergovisio display with white numbers on black background for increased visibility •D ouble-action pipetting button; rotating upper part prevents accidental volume alteration • L ight, smooth pipetting action enables better results over longer periods • Fully autoclavable • S uper blow-out piston with volumes of 50μL and below ensures delivery of micro-size drops Cat No. Volume range, µL Accuracy 11827351 1 to 10 ±2,5 to 1% 11867351 10 to 100 ±3 to 0,8% 11887351 100 to 1000 ±1 to 0,6% 11807361 1000 to 10000 ±2 to 0,5% Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ pipette tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). • Excellent for single and multichannel pipetting • Sterile tips are supplied in vacuum sealed, sterilised, 10 × 96 rack and they are certified to be free from DNA, DNase, RNase and Endotoxins • Save space with refills Cat No. Volume, µL Pack qty 11863420 10 10 x 96 11738184 300 10 x 96 11458479 1000 10 x 96 10715305 10000 100 8-channel 11807381 5 to 50 - 10339263 30 to 300 - 10 www.eu.fishersci.com SAMPLING VESSELS PIVOT NOZZLE BOTTLES, LDPE BOTTLES WITH SPOUTED CAP, LDPE • Round LDPE bottles fitted with a pivoting nozzle closure • Nozzle retracts into cap to seal bottle • Suitable for use as a dropping or wash bottle and excellent for dispensing gels • Good resistance to chemical attack • Round LDPE bottles fitted with spouted dropper closure • Closure features a captive sealing cap and can be cut to adjust flow rate • Suitable for use as a dropping or dispensing bottle • Good resistance to chemical attack Cat No. Capacity, mL Diameter, mm Height, mm Pack qty Cat No. Cap size Capacity, mL Diameter, mm Height, mm Pack qty 10349794 30 32 66 10 12054827 28R4 30 32 93 10 10411055 60 40 79 10 10709385 28R4 60 40 109 10 150 50 147 10 10399504 150 59 120 10 12084747 28R4 12559185 250 59 145 10 12084707 28R4 250 60 174 10 12569185 500 74 174 10 10044804 28R4 500 73 194 10 SAMPLE STORAGE 600mm WING DOOR SAFETY CABINETS FOR ACIDS AND ALKALIS UNDERBENCH SAFETY CABINET FOR ACIDS AND ALKALIS • Safety elements assembled outside the storage compartment for increased protection against corrosion, easy to clean • Two hermetically separated storage compartments • Cylinder locking (integration in locking system possible) • Adjusting aids to compensate for uneven floor • Integrated metal-free air ducts ready for connection (NW 75) to a technical exhaust system with only one extraction air inlet • Excellent venting - separate extraction air of storage compartments • GS approval • EN 14727 conformity (laboratory furniture) • Weight, kg: 125 • Extraction air, NW: 75 • Air exchange 30 times, m3/h: 35 • Pressure drop inside the cabinet, Pa: 56 • Made of highly resistant melamine coated special plates • Two separated storage compartments (model SL.060.140.UB and SL.060.110.UB) • Cylinder locking • Integrated venting system ready for connection (NW 75) to a technical exhaust system at the cabinet back, permanent ventilation of both compartments via only one extraction air inlet • GS approval • EN 14727 conformity (laboratory furniture) • Weight, kg: 36 • Extraction air, NW: 75 • Air exchange 30 times, m3/h: 7 • Pressure drop inside the cabinet, Pa: 5 Cat No. Dimensions exterior, W x D x H, mm Dimensions interior, W x D x H, mm Pack qty 12643515 600 x 605 x 1970 485 x 565 x 930 Cat No. Dimensions exterior, W x D x H, mm Dimensions interior, W x D x H, mm Pack qty 13479716 590 x 570 x 600 488 x 531 x 562 1 1 www.eu.fishersci.com 11 SAMPLING SAMPLE STORAGE 90 MINUTE SAFETY STORAGE CABINET Q-CLASSIC-90 RAL-7035 WASTE BIN FOR DISPOSAL OF CLOTHS, RAGS, WIPERS SOAKED IN OIL Type 90 safety storage cabinet Q-CLASSIC-90, Q90.195.060 including three shelves, perforated insert and bottom collecting sump plastic laminated sheet steel RAL 7035. • Robust construction and longevity – triple hinged door, safety elements assembled outside the storage compartment for increased protection against corrosion, scratch- and impactresistant surface, easy to clean • Easy handling with comfort – doors stop in any position, selfclosing in the event of fire • No unauthorised use – doors lockable with cylinder locking (integration in a locking system possible) and locking state indicator (red/green) • Easy transport – integrated transport base with removable, optional base cover • Easy alignment - adjusting aids to compensate for uneven floor • Quickly put into operation – integrated air ducts ready for connection (NW 75) to a technical exhaust system • Furnace tested (type test) in accordance with EN 14470-1 • Fire resistance 90 minutes • GS approval, CE conformity • EN 14727 conformity (laboratory furniture) • Maximum load, kg: 600 Raised, ventilated bottom promotes air circulation, prevents spontaneous combustion. • Rugged, lead-free galvanised-steel body with reinforced ribs • Trilingual safety label • Self-closing, opens easily with foot treadle Cat No. Capacity, L Diam. x Height, mm Pack qty 11963589 38 354 x 467 1 DISPENSING CAN Dispensing cans for one handed dispensing of liquids directly onto work surface, 240mL capacity • One-handed dispensing of liquids directly onto work surface • Leakproof, self-closing valve • Dispensing valve minimises spills and controls excess • FM approved brass valve, ideal for use with flammables • Textured HDPE body provides firm grip Cat No. Dimensions exterior, W x D x H, mm Dimensions interior, W x D x H, mm Pack qty 11934796 600 x 615 x 1955 450 x 520 x 1645 1 Cat No. Capacity, mL Diam. x Height, mm Pack qty 11924776 1200 x 600 x 1970 1130 x 505 x 1685 1 11933679 240 78 x 139 1 SAMPLE PREPARATION SOLID PHASE EXTRACTION CHEMICALS, SOLVENTS CHEMICALS, REAGENTS • Certified AR for analysis • Reagents for sample preparation Cat No. Description Pack qty Cat No. 10162180 Acetone 2,5 2,5L Acros Organics Description Pack qty 10253470 Cyclohexane 2,5 L 10424225 Ambersep 900, OH form ion-exchange resin 2,5kg 10784941 Dichloromethane 2,5L 10522011 tert-Butyl methyl ether, 99%, pure 2,5L 10437341 Ethanol 2,5L 10702394 N,N-Dimethylformamide, 99.8+%, for spectroscopy ACS 1L 10386320 Ethyl acetate 2,5L 10145263 Osmium tetroxide, 4 wt.% solution in water 10mL 10396090 Methanol 2,5L 10767234 Palladium(II) acetate, 47.5% Pd 1g 10784751 n-heptane 2,5L 10752723 Tetrabromophenol Blue, pure 5g 10315720 Propanol 2,5L 10247043 Titanium(III) chloride, 20% w/w solution in 2N Hydrochloric acid 25mL 10783601 n-hexane 2,5L 13505010 Dextran sulfate sodium salt, approx. M.W. 6,500 - 10,000 25g 10356390 Toluene 2,5L Fisher Chemical 12 10690311 Anti-bumping granules, extra pure, fused alumina 1kg 10626262 Gum acacia, technical, powder 500g 10754961 Sodium thiosulfate pentahydrate, technical 3kg www.eu.fishersci.com SOLID PHASE EXTRACTION SAMPLE PREPARATION CYLINDERS, PPCO, GRADUATED, WITH SPOUT WASH BOTTLES, LDPE • Labelled and colour coded for most commonly used solvents • Translucent with coloured closure • Comes with vented 38mm closure to prevent solvent drips • 500mL capacity • Large rounded base ribbed for reinforcement and stability • C alibrated ‘To Contain/To Deliver’ at 20°C - meets ASTM laboratory standards • C hemical, heat and impact resistant makes these cylinders excellent for long term use • No meniscus to confuse readings - eliminates guesswork Cat No. Label Closure colour Pack qty 11785233 Ethanol Natural 6 Cat No. Capacity, L Pack qty 11745243 Water Solvant Natural 6 11997874 100 8 11745233 Acetone Red 6 11907884 250 8 11967874 500 6 11937874 1000 4 11927874 2000 2 BOTTLES, CARBOY, HDPE AND PP ICE FLAKE MAKER • E lectronically controlled operation, with self-diagnostic functions with external alarm lights providing operational information for early alert and fast diagnosis of operating issues • P ressure-based water level monitoring system may work with demineralised water as well as with standard water • P lug-n-play configuration right out of the box - just connect incoming water line and water discharge • E xternal components constructed from corrosion-resistant stainless steel, crafted for optimal aesthetic appeal through superior fit and finish • E rgonomically convenient, slanted & disappearing storage bin door • Front access for easier maintenance • Front-in, front-out airflow allows for built-in installations • CFC-free R-134a refrigerant • Dimensions, mm: 813 x 535 x 621 Fisherbrand carboys are ideal for storing and dispensing purified water and a wide variety of lab reagents • Space saving rectangular design • Wide mouth closure • Available in 9L or 20L, with or without spigot • Graduated in litres and gallons • Material: - HDPE, able to withstand low temperatures - Polypropylene, autoclavable Cat No. Material Capacity, L Pack qty 13458029 HDPE without spigot 9 1 13478029 HDPE without spigot 20 1 13448029 PP without spigot 9 1 13468029 PP without spigot 20 1 13438039 HDPE with spigot 9 1 Cat No. Output Capacity, kg 13408039 HDPE with spigot 20 1 10049789 70kg/24hr 25 13418039 PP with spigot 9 1 13428039 PP with spigot 20 1 FOOD Cosmetic Industry – Is food analysis important to your process? ANALYSIS SCRATCH AND SNIFF Our Food Analysis brochure features a comprehensive range of high quality and reliable products to collect, store and prepare your sample. Discover how you can validate a large range of parameters during all steps of your processes. Available on eu.fishersci.com www.eu.fishersci.com 1 www.eu.fishersci.com 13 SAMPLE PREPARATION CENTRIFUGATION CENTRIFUGAL CONCENTRATORS, VACUUM, SPEEDVAC™ KITS MICROCENTRIFUGES, MICRO 17/17R • Capacity: 48mL (24 x 15/2mL tubes) • Maximum speed/RCF: 13300rpm/17000xg • Adjustable 99 minute timer and quick-spin feature for short runs • Supplied with rotor and biocontainment lid • Capacity: 48mL (24 x 15/2mL tubes) • Maximum speed/RCF: 13300rpm/17000xg • Adjustable 99 minute timer and quick-spin feature for short runs • Supplied with rotor and biocontainment lid Cat No. Description Pack qty 11516873 Microcentrifuge Micro 17, ventilated 1 11526873 Microcentrifuge Micro 17R, refrigerated 1 Cat No. Description 12642735 SpeedVac concentrator SPD111V Package 1, includes : SpeedVac concentrator basic model biology; universal vacuum system (oil free pump and -50°C refrigerated vapour trap; glass condensation flask; 40 1 x 1,5mL rotor; tubing package (12 foot length of thick walled tubing, cutter, clamps, fittings, manual bleed valve, instructions); CryoCool™ heat transfer fluid (1L) 11353553 SpeedVac concentrator SPD111V Package 2, includes: SpeedVac concentrator, basic molecular biology; -105°C, ultra-low temperature refrigerated vapour trap; high vacuum pump; 40 x 1,5mL rotor; universal tubing package; digital vacuum gauge; chemical trap kit for use 1 with disposable cartridge; disposable cartridge with colour indicator for trapping acids and water vapour; glass condensation flask; vacuum pump lubricating oil, CryoCool heat transfer fluid (1L) 12692755 SpeedVac concentrator SPD121P Package 1, includes: SpeedVac concentrator; -105°C, ultra-low temperature refrigerated vapour trap; oil free ETFE/PFA four-headed pump; 64 x 1,5mL rotor; digital vacuum gauge; chemical trap kit for use with disposable cartridge; disposable 1 cartridge with colour indicator for trapping acids and water vapour; tubing and fitting (4 foot length of clear, thick-walled vacuum tubing, two clamps, cutter); glass condensation flask; CryoCool heat transfer fluid (1L) 12622765 SpeedVac concentrator SPD131DDA Package 1, includes: SpeedVac concentrator, acid resistant; -105°C, ultra-low temperature refrigerated vapour trap; oil free ETFE/PFA four-headed pump; rotor for 40 x 12mm 1 x 75mm glass tubes; glass condensation flask; CryoCool heat transfer fluid (1L); tubing and fitting kit (4 foot length of clear, thick-walled vacuum tubing, two clamps, cutter) 12602765 SpeedVac concentrator SPD131DDA Package 2, includes: SpeedVac concentrator, basic molecular biology; -5°C refrigerated vapour trap; vacuum pump; rotor for 15 x 15mm x 45mm 1 dram vials; chemical trap kit for use with disposable cartridge; disposable cartridge with colour indicator for trapping acids and water vapour; tubing and fitting kit (4 foot length of clear, thick-walled vacuum tubing, two clamps, cutter); glass condensation flask; CryoCool heat transfer fluid (1L); vacuum pump lubricating oil TUBE, MICROTUBE • Use between -80°C to 120°C • Flat cap • Withstand speeds up to 26000xg • DNase, RNase free • Polypropylene • Graduation molded • Autoclavable • Non-sterile Cat No. Capacity, mL Colour Diam. x height, mm Pack qty 11926955 1,5 Natural 11 x 40 500 Pack qty TUBES, CENTRIFUGE, THERMO SCIENTIFIC NUNC™ EZ FLIP™ CAP • Integrated leakproof cap prevents cross contamination and lost closures • Patented hinged-cap system • Ergonomic design for one handed opening and closing • Clarified polypropylene construction provides chemical resistance and high RCF tolerance • White writing area and flat caps for sample identification • Printed graduations • Standard dimensions compatible with centrifuge rotors • 15mL and 50mL versions are available 1 CONICAL CENTRIFUGE TUBES • 15mL and 50mL Capacity • Available in PP and PET • Black graduation marks • White marking area • Flat cap and plug seal cap • Gamma irradiation sterilisation • Bulk or rack version Cap flat top Cap plug seal Capacity, mL Max. rcf, xg Material Dia. x H, mm Sterile Inner pack qty Pack qty Cat No. Description RCF, xg max Inner pack qty Pack qty Bulk 10512802 15mL bulk 8500 50 500 11755075 11765075 15 6000 PP 17 x 119 Yes 25 500 10777414 15mL racked 8500 50 500 11512303 11809650 50 9400 PP 29 x 114 Yes 25 500 10048631 50mL bulk 9500 25 500 - 11829650 50 9400 PP 29 x 114 No 25 500 10571663 50mL racked 9500 25 500 Rack - 14 11879640 15 1800 PET 17 x 119 Yes 50 500 11849650 11889640 15 6000 PP 17 x 119 Yes 50 500 - 11839650 50 1800 PET 29 x 114 Yes 50 500 11819650 11899640 50 9400 PP 29 x 114 Yes 50 500 www.eu.fishersci.com HOMOGENISATION STIRRERS, OVERHEAD, DIGITAL HOMOGENISER • Built for high volume/high viscosity lab or pilot plant applications • High performance brushless DC motors • Overload protection • Hollow through shaft for easy impeller adjustment • Clamp, stand and mixing impellers available separately • Safety approved to EN 61326 CE / IEC 61010-1 and 610102-51, EMC EN 50081-1, EN 50082-1 ROHS, WEEE • Three year warranty • Hand-held or bench top operation • Ideal for use with a wide range of hard or soft samples Cat No. Description Pack qty 15183007 Model 500, 11000 to 30000rpm 1 Cat No. Description Pack qty 15123017 Base stand for model 500 and 1000 1 15203807 Overhead stirrer, 40 to 2000rpm, 25L 1 15293797 Overhead stirrer, high torque, 20 to 3000rpm, 60L 1 POLYMIX HAMMER AND CUTTING MILLS CUTTING MILLS MICROTRON™ • Cutting mill Equipped with a 3-blade rotor for fibrous materials: wood, leaf, paper, glass fibre, textile, leather, plastic, etc. • Hammer mill Equipped with a 3-hammer rotor for brittle materials: minerals, cereal, coffee, tablets... • Interchangeable rotor Increased flexibility at low cost. • Safety LCD screen with display of messages and the rotation speed. Automatic motor shutdown when opening the grinding chamber. Auto standby. Aluminium frame with carry handle. Stainless steel lining and grinding chamber with rounded CN29 output for sample recovery in a tube or laboratory glassware. Manual adjustment of the feed rate of the grinding chamber. Delivered with 1mm sieve, 12 collecting tubes on stand, cleaning kit and rotor change. • Opening: 20mm x 20mm • Speed: 50 to 6000 r/min • W x D x H: 250 x 330 x 480mm • Power: 230 V - 50 Hz • Absorbed power: 1000 W • Max. sound level: 70 dB For mixing, dispersing, homogenising, emulsifying and size reduction of cuttable materials • Starts only when safety hut or lid are well attached • 550W or 800W motor with speed regulation from 500rpm up to 17 000rpm • Blades made with stainless cutlery steel • Glass attachments with volumes of 125mL, 250mL, 0,5L and 1L • Stainless steel attachments with volumes of 2L and 4L Cat No. Description Pack qty 11900359 Polymix cutting mill 1 11910359 Polymix hammer mill 1 Cat No. Description Pack qty 11940049 Microtron™ MB550 cutting mill 1 11979058 Microtron™ MB800 cutting mill 1 STIRRER, MAGNETIC, ULTRAFLAT, ESP STIRRERS, MAGNETIC, ISOTEMP RT, D50/6 Ultraflat magnetic stirrer with no moving mechanical components. • Gentle start-up • 1100rpm • 5L stirring volume (H2O) • Ergonomic design • High resistance to chemical reagents • Low profile; light weight design with small foot print • Strong magnetic coupling to ensure consistent stirring during experimental procedures • Speed control : 150 to 2500rpm • Two non-slip silicone plate covers provided with all unit one white-one black Cat No. Description Pack qty Cat No. Diameter, mm Stirring capacity, L Pack qty 11791174 ESP magnetic stirrer, 100-240V, 50/60Hz 1 15336607 120 2 1 15346607 170 4 1 15356607 220 5 1 www.eu.fishersci.com 15 SAMPLE PREPARATION HOMOGENISATION VORTEX MIXER SHAKER, ROCKER, DIGITAL • Speed: 0 to 3000rpm • Touch or continuous operation • Technopolymer body for higher chemical resistance • Orbit diameter: 4,5mm • Dimensions, internal [w x d x h], mm: 153 x 170 x 125 • Compact design ideal for incubators, chambers and refrigerators • Digital speed control 5 to 100rpm • Easily adjustable tilt angle 5° to 13° • Includes dimpled mat + 2 fixing bands Cat No. Description Pack qty Cat No. Description Pack qty 13214789 Vortex mixer, speed 0 to 3000rpm 1 15218844 Rocker, digital 1 STIRRING HOTPLATE ISOTEMP™ SHAKER, ROTATOR, WAVING • Isotemp™ stirrers are designed to provide precise stirring control for most routine protocols • Features slow speed stirring, consistent speed control, and strong magnetic coupling • Stir bar is included with stirrer • Three years warranty • Certifications: CE • RoHS compliant • Splash guard protection shield 18cm x 18cm accessory also available • Surface type: ceramic • Plate dimensions, mm: 180 x 180 • Compact design ideal for incubators, chambers and refrigerators • Digital speed control 8 to 100rpm • PID control • Easily adjustable tilt angle 0° to 13° • Includes dimpled mat + 2 fixing bands Cat No. Description Pack qty 15238844 Rotator, waving 1 Cat No. Description 15353528 Stirring Hotplate Isotemp Hotplate, digital, Isotemp™ Advanced EU plug 15363528 Stirring Hotplate Isotemp Hotplate, digital, Isotemp™ Advanced UK plug 15333518 Stirring Hotplate Isotemp Stirrer, magnetic, Isotemp™ EU plug 15343518 Stirring Hotplate Isotemp Stirrer, magnetic, Isotemp™ UK plug 15393528 Stirring Hotplate Isotemp Hotplate stirrer, magnetic, Isotemp™ Advanced EU plug 15303538 Stirring Hotplate Isotemp Hotplate stirrer, magnetic, Isotemp™ Advanced UK plug HOTPLATES, ISOTEMP RT DIGITAL 230V, 50/60HZ • Low profile design • Digital control • You can easily set your own temperature limit at any value between 0°C and 350°C • Overheat prevention circuit turns off the heater if the hot plate temp reaches 450°C • Hot top warning indicator • Keypad lock button • Three user selectable temperature modes: Optimal, Fast or Slow mode • Two user selective timers: showing actual and set value simultaneously • Separate operation Run/Stop button Cat No. Description Pack qty 15306607 RT digital hotplate 1 15316607 RT hotplate stirrer 1 15326607 RT advanced hotplate stirrer 1 16 Pack qty HOTPLATE STIRRER RT2 Each unit is equipped with hot top warning and built-in temperature shut-off. Overheat prevention circuit turns off the heater if the top plate temperature reaches 450°C. • Hot top warning indicator • Adjustable temperature limit: 50° to 350°C Cat No. Description Pack qty 15248824 Hotplate stirrer, RT2, 140mm ceramic coated aluminium plate 1 www.eu.fishersci.com HOMOGENISATION CIMAREC+™ STIRRER SERIES SUPERNUOVA+™ HOTPLATE SERIES Thermo Scientific™ Cimarec+™ series digital stirrers offer precise stirring control for your routine protocols. The Cimarec+ Series are available in three sizes, providing flexibility from microscale chemistries to production operations. • Speed: 50 to 1500rpm • Material: Ceramic • Easy-to-read LED display for stirring • Raised display design protects electronics from spills • Optional splash guard protection shield Thermo Scientific™ SuperNuova+™ hotplate series provides reliable performance, dependable safety and simple operation. Units are available in two sizes, including a multi-position model with optimised controls and settings for applications that demand advanced precision. • Easy-to-read LED display for heating and stirring • Raised display design protects electronics from spills • Ability to set programs (ramp/dwell) as well as save settings • Top plate material: Ceramic • Stir Trac features innovative engineering for slow-speed stirring, consistent speed control, and stronger magnetic coupling • Hot top warning system protects from accidental burns with prominent display when heating surface is above 50°C Cat No. Top plate surface, mm Dimensions (L x W x H), mm Pack qty 15463600 108 x 108 254 x 127 x 91 1 Cat No. Temperature max Top plate surface, mm Dimensions (L x W x H), mm Pack qty 15463610 450°C 330 x 208 x 97 1 184 x 184 FILTRATION Distributor GE Healthcare FILTER PAPERS, GLASS MICROFIBRE, GF/F, 0,7µm FILTER PAPERS, GLASS MICROFIBRE, MF 300 • Used to filter finely precipitated proteins • An ultrafine filter capable of retaining particles as small as 0,7µm in liquids, but unlike membrane filters it has a rapid flow rate and an extremely high loading capacity • It can be used in conjunction with GF/D range (please visit our website) for the successful clarification of ‘extremely difficult’ biochemical solutions and fluids • High loading capacity • Made from 100% borosilicate glass • Compatible with many solvents and reagents • Contain no binder • Not affected by humidity • Suitable for use at and up to 500°C This filter is suitable for general filtration of solvents, analysis of HPLC samples, filtration of proteins and biochemical solutions plus other applications where fine particulates are involved Cat No. Diameter, mm Pack qty 11350604 25 100 11370604 47 100 FILTER HOLDER, MEMBRANE HOLDER, GLASS, 47mm, VACUUM Cat No. Diameter, mm Retention, µm Pack qty 11764083 47 0,7 100 11704083 47 1,2 100 11764093 90 0,7 25 11714083 90 1,2 100 For vacuum filtration of aqueous, organic or corrosive liquids for particulate contamination analysis. Also recommended for HPLC solvent filtration. Vacuum connection to integral base and flask cap is above filtrate exit level, avoiding risk of drawing filtrate droplets into vacuum tubing. Laminated filters will not seal correctly in this holder. Warning: Not recommended for use with flammable liquids. Cat No. Description Pack qty 10658451 Filter holder vacuum with fritted glass support glass funnel 300mL flask 1L 1 www.eu.fishersci.com 17 SAMPLE PREPARATION FILTRATION LABORATORY VACUUM PUMP PUMP, VACUUM AND PRESSURE, OIL FREE • Laboratory vacuum pump, standard, membrane, aluminium/ PTFE • 15L/min, down to 100mbar • Filtration of aqueous or non-aggressive solvent solution • Vacuum oven, degassing, gas transfer • Oil free piston pump designed for general duty laboratory applications requiring only a rough vacuum and moderate pressure • Tough, lightweight, plastic housing with integral carrying handle • Water jet or aspirator replacement for general duties • Lightweight, compact, portable, standard-duty operation • Applications include vacuum filtration, aeration, aspiration, gas sampling • Not recommended for organic, basic and acidic vapours • Dimensions (w x d x h), mm: 114 x 194 x 191 Cat No. Description Pack qty 12695326 Laboratory vacuum pump 1 Cat No. Description Pack qty 11533485 Pump, vacuum and pressure, oil free 1 FILTER UNITS, SYRINGE, NON-STERILE LABORATORY VACUUM PUMP • Oil free pump for degassing, filtration, desiccation, aspiration and tissue culture. • Compact • Economical • Aqueous and chemical PTFE versions • High flow versions for viscous and large well systems • Tissue culture versions accessorised ready for use • Pressure, mbar: 133 • Flow rate, L/min: 18 • Dimensions (L x W x H), mm: 194 x 114 x 191 Cat No. Description Pack qty 10191942 Laboratory vacuum pump 1 • Perfect for daily routine analysis • Nylon membrane for aggressive aqueous solutions, hydrophobic PTFE for aqueous or organic solutions Cat No. OD, mm Pore size, µm Membrane Pack qty 15121499 25 0,2 Nylon 50 15131499 25 0,45 Nylon 50 15181489 25 0,2 PTFE Hydrophobic 50 15101499 25 0,45 PTFE Hydrophobic 50 15141499 25 0,2 PTFE Hydrophilic 50 15151499 25 0,45 PTFE Hydrophilic 50 15161499 13 0,2 PTFE Hydrophilic 100 15171499 13 0,45 PTFE Hydrophilic 100 15181499 33 0,2 PES 50 15191499 33 0,45 PVDF 50 15206869 33 0,2 PES 50 15216869 33 0,45 PES 50 FILTER UNITS, SYRINGE, GD/X™ AND GD/XP™ Distributor GE Healthcare Enable filtration of hard to filter or viscous samples. Applications include: sample preparation, dissolution testing, content uniformity, concentration analysis. GD/X™ syringe filters, with unique prefiltration stack of Whatman™ GMF 150 (graded density) and GF/F glass microfibre filters, are ideal for use with sample volumes of up to 10mL (13mm filter) or greater than 10mL (25mm filter) (11314794 and 11334794 contain GMF150 but not GF/F prefilter). GD/XP™ syringe filters are ideal for use with samples that require ion analysis, as levels of ion extractables are minimised, they contain a prefilter stack of 20µm and 5µm polypropylene filters Model No GD/X™ GD/XP™ Diameter, mm 13 25 2 Effective filtration area, cm 1,3 4,6 Cat No. Description Membrane Pore size, µm OD, mm Pack qty 11334764 GD/X™ Nylon 0,2 25 150 10279090 GD/X™ Nylon 0,45 25 150 11394764 GD/X™ PVDF 0,2 25 150 11304774 GD/X™ PVDF 0,45 25 150 11354774 GD/X™ PTFE 0,45 25 150 11344774 GD/X™ PTFE 0,2 25 150 11344804 GD/XP™ Nylon 0,45 25 150 11330344 GD/XP™ Nylon 0,45 25 1500 11354804 GD/XP™ PVDF 0,45 25 150 11370344 GD/XP™ PVDF 0,45 25 1500 18 www.eu.fishersci.com HYGIENE, DISINFECTION AND PROTECTION INCUBATORS, OVENS THERMO SCIENTIFIC HERATHERM COMPACT MICROBIOLOGICAL INCUBATORS THERMO SCIENTIFIC ENVIRONMENTAL CHAMBERS • Ideal for drug stability studies, shelf life testing of packaged products, controlled temperature storage, insect and large scale biological research • 0° to 60°C (32° to 140°F) temperature range that can be set in 0,1°C increments • Optimum uniformity and a wide temperature range allow for easy compliance with regulatory requirements • Rugged construction and durable shelving provide for long life • Customisable options are available for this series • Full two year parts and labour warranty • Shelves, supplied/max: 5/26 • Temperature range: 5° above ambient to 60°C • Temperature control: ±0,1°C • Temperature uniformity: ±0,3° @ 25° to 37°C • Also available 821L model: 15563771 without refrigeration and humidity control • Minimal footprint for space restricted lab areas • Temperatures at or below ambient • High temperature accuracy • Internal light facilitates sample observation • Convection technology: mechanical convection • Temperature range °C 17 - 40 • Spatial temperature deviation at 37 °C: ± 1,2 °C • Temperature deviation over time at 37 °C: ± 0,2 °C • Footprint m2: 0,12 • Dimensions - Interior, mm (W x H x D): 180 x 310 x 290 - Exterior, mm (W x H x D): 260 x 415 x 4705 Number of shelves supplied/max: 2/3 Energy consumption at 37 °C: 14W Cat No. Capacity, L 10699640 18 Cat No. Capacity, L Dimensions interior, mm (W x H x D) Dimensions exterior, Shelves, supplied/ mm (W x H x D) max 15480430 311 686 x 787 x 609 813 x 965 x 1308 6/19 15470430 821 686 x 787 x 1524 838 x 965 x 2032 5/26 THERMO SCIENTIFIC HERATHERM MICROBIOLOGICAL INCUBATORS, GENERAL PROTOCOL Safe • Safe view of samples through internal glass door, without impact on temperature • Safe conditions with superior temperature uniformity • Safe containment with automatic overtemperature alarm • Alarm in case of temperature deviations Easy • Easy temperature setting with intuitive user interface • Easy to remove ‘One Click‘ shelf system • Easy to clean interior with rounded corners • Easy to read large display Efficient • Efficient small footprint to optimise bench top space • Conveniently stackable without the need for tools or stacking kits • Efficient utilisation of interior with flexible shelf system • Incubators are supplied with two shelves 10529070 10839810 10744262 12625306 12635306 Model No IGS60 IGS100 IGS180 IGS400 IGS750 Capacity, L 75 117 194 400 750 Power rating, W 300 520 710 1200 1500 Current, A 3,7 2,3 3,1 5 6,5 Dimensions, external [w x d x h], mm 530 x 565 x 720 640 x 565 x 820 640 x 738 x 920 778 x 1545 x 770 1261 x 1545 x 770 Dimensions, internal [w x d x h], mm 354 x 414 x 508 464 x 414 x 608 464 x 589 x 708 544 x 1305 x 569 1004 x 1307 x 569 Number of shelves, supplied/max 2/13 2/16 2/19 2/39 2/39 Mass, kg 40 51 65 145 201 THERMO SCIENTIFIC HERAEUS™ VACUUM OVENS • Range of jacket heated vacuum ovens with stainless steel chambers • Kelvitron electronic temperature controller with digital display • DN25KF vacuum connection on rear of oven • Inert gas connection • Temperature max: 200°C • Spatial temperature deviation at 200°C: ±4°C • Weight: 82kg Cat No. Capacity, L Dimensions interior, mm (W x H x D) Dimensions exterior, mm (W x H x D) Shelves 10019490 53 415 x 371 x 345 744 x 570 x 576 2 www.eu.fishersci.com 19 HYGIENE, DISINFECTION AND PROTECTION Cat No. SAFETY PROTECTION GLOVES, NITRILE, PPE, CATEGORY III KIMTECH SCIENCE™ COMFORT NITRILE GLOVES, NITRILE, DISPOSABLE, POWDER FREE, KIMTECH SCIENCE™ PURPLE NITRILE™ Combines high comfort, quality and cleanliness for protection in low risk research applications. • PPE Category III • A brand-new nitrile formulation engineered for comfort • 150 gloves per standard sized box • Better chemical protection than latex, tested on the 6 most common chemicals in the lab • Non-contaminated gloves can be recycled through our RightCycle Programme Excellent choice for higher risk applications in life sciences and non-sterile pharmaceutical manufacturing. Best combination of protection, cleanliness and quality. Best chemical protection in the KIMTECH SCIENCE™ range, tested against over 50 chemicals and 20 cytotoxic drugs. Strength, quality and cleanliness tracked by certificate of analysis. PPE cat III compliant, AQL 0.65, EN 374-1 and -2, ISO 16604, food contact approved. Size Pack qty 15302256 XS 150 15312256 S 150 15322256 M 150 15332256 L 150 15362206 XL 150 Cat No. Size Pack qty 10737655 XS 100 10248264 S 100 11889610 M 100 11899610 L 100 11809620 XL 90 GLOVES, CLEANROOM, NITRILE, STERILE PPE CATEGORY III, KIMTECH PURE™ G3 WHITE GLOVES, DISPOSABLE, POWDER FREE KIMTECH SCIENCE™ GREEN NITRILE™ PPE, CATEGORY III • Certified PPE Category III • Extra dexterity and comfort • Ideal for EU GMP ISO Class 5 Grade A cleanrooms • Sterility assurance level 10-6 • Great value nitrile glove with the fit and feel of latex • Comfortable, durable and sustainable • 250 gloves per standard sized box reduces waste, space and environmental impact • Tested against over 30 chemicals. PPE Category III compliant, AQL 0.65, EN374-1 and -2, ISO 16604, food contact approved Cat No. Size Pack qty 11718532 6 100 Cat No. Size Pack qty 11728532 6,5 100 11719295 XS 250 11738532 7 100 11729295 S 250 11748532 7,5 100 11739295 M 250 11758532 8 100 11749295 L 250 11768532 8,5 100 11759295 XL 225 11778532 9 100 LABORATORY COATS, SINGLE USE, KIMTECH SCIENCE™ A7 P+ CATEGORY III OVERSHOES, KIMTECH PURE A8 • Ideal for laboratory environments with low risk of exposure to chemicals and a basic need for contamination control • Extra protection: elastic wrists and thumb loop for full wrist coverage; extra length arms to help to keep the glove in place • Offers Type 6 (PB) limited chemical protection, protecting the user against liquid chemicals (light splashes, sprays and aerosols) • Ideal for laboratories and ISO7 cleanroom environment • Made from highly durable waterproof material offering 4 times more grip than conventional anti-slip shoe covers • Seamless bottom, elastic toe and heel, double-bagged, not made with silicone or latex • Available in three sizes for a perfect fit. White. Cat No. Size Pack qty Cat No. Description Pack qty 13529020 S 15 15319470 Shoe Covers A8 Anti-slip ISO 7 Size 38-42 300 13549020 M 15 15339470 Shoe Covers A8 Anti-slip ISO 7 Size 41-45 300 15359470 Shoe Covers A8 Anti-slip ISO 7 Size 44-47 300 13559020 L 15 13569020 XL 15 13589020 XXL 15 20 www.eu.fishersci.com SAFETY PROTECTION GLOVES, NITRILE, DISPOSABLE, PURPLE, PPE CATEGORY III DISPOSABLE HIGH-TACK SHOE COVERS • Ergonomically designed and 100% nitrile • Latex and protein free with non-detectable residual accelerators • Textured fingertips • Powder free • Length, mm: 250 • High-Tack, disposable shoe covers provide superior protection • Single-use • Polyurethane • Latex-free • High-Tack sole Cat No. Size Pack qty 11502723 2XS 100 11512723 XS 100 11522723 S 100 10223882 M 100 11542723 L 100 11552723 XL 100 Cat No. Description Colour Size,mm Pack qty 15421952 Shoe cover, High-Tack Blue Universal 300 15431952 Shoe cover, High-Tack Blue X-Large 300 DISPOSABLE POLYETHYLENE SHOE COVERS DISPOSABLE SHOE COVERS • Spunbond polypropylene shoe covers protect against dirt, grime and certain dry particulates • Single-use • Polypropylene • Latex-free • With or without anti-skid sole Cat No. Description Colour Size,mm Pack qty 15481942 Shoe cover with anti-skid Blue X-Large 300 15491942 Shoe cover with anti-skid Blue Universal 300 15401952 Shoe cover without anti-skid Blue X-Large 300 15411952 Shoe cover without anti-skid Blue Universal 300 • Single use, disposable covers provide convenient protection • Polyethylene • Latex-free Cat No. Description Colour Size,mm Pack qty 15451952 Shoe cover, polyethylene Blue X-Large 300 15461952 Shoe cover, polyethylene Blue Universal 300 DISPOSABLE POLYPROPYLENE LAB COATS DISPOSABLE ANTI-STATIC SHOE COVERS • Conductive carbon strip helps eliminate static buildup • Single-use • Elastic ankle • 42gms polypropylene • Latex-free • Latex-free spunbond polypropylene construction lab wear • Elastic cuffs hold sleeves in place • Five snaps for a secure closure • Standard collar • No pockets • Fabric weight: 50g/m2 Cat No. Description Colour Size,mm Pack qty 15441952 Shoe cover, with conductive carbon strip Blue Universal 300 Cat No. Colour Size Pack qty 15431922 White S 25 15441922 White M 25 15451922 White L 25 15461922 White XL 25 15471922 White 2XL 25 15481922 White 3XL 25 www.eu.fishersci.com 21 HYGIENE, DISINFECTION AND PROTECTION FILTRATION RESPIRATORS, 9300+ SERIES AURA™ Covers a range of applications requiring FFP1, FFP2 and FFP3 protection. • Unique three panel design for greater comfort and easy communication • Soft cover web on inner panel ensures greater comfort • Centrally positioned cool flow valve reduces heat build up and makes breathing easier and cooler • Evenly tensioned headbands to relieve strap pressure • Lightweight and foldable • Individually packed to avoid contamination during storage Cat No. Description Pack qty 11717574 9310+ premium dust respirator, provides protection against fine dusts. Individually packed, EN 149:2001 FFP1. Particulates Assigned Protection Factor 4 (NPF 4) 20 12672545 9312+ premium valved dust respirator, provides protection against fine dusts. Individually packed, EN 149:2001 FFP1. Particulates Assigned Protection Factor: 4 (NPF 4) 10 10583051 9320 premium dust/mist respirator, provides protection against fine dusts and water based mists. Individually packed, EN 149:2001 FFP2. Particulates Assigned Protection Factor: 10 (NPF 12) 20 10116544 9322+ premium valved dust/mist respirator, provides protection against fine dusts and water based mists. Individually packed, EN 149:2001 FFP2. Particulates Assigned Protection Factor: 10 (NPF 12) 10 10718615 9332+ premium valved dust/mist/metal fumes respirator, provides protection against fine dusts, water based mists and metal fumes. Individually packed, EN 149:2001 FFP3 Particulates Assigned Protection Factor: 20 (NPF 50) 10 The 3M™ Respirators 8000 Series provide lightweight, comfortable and effective respiratory protection against dust and mist. The convex shape, twin strap design, nose foam and nose clip ensure comfortable wear over a range of face sizes. The collapse resistant shell and proprietary 3M™ respirators offer durable, comfortable protection particularly in hot and humid conditions. Cat No. Size 11703363 3M™ 8710 cup-shaped unvalved dust/mist respirator - small pack FFP1 20 Pack qty 11713363 3M™ 8810 Cup-Shaped Unvalved Dust/Mist Respirator - small pack FFP2 20 LABORATORY COATS, UNISEX • Washable at 85°C • Features include, two lower patch pockets, breast pocket with integral pen pocket, concealed stud fastened front, single rear vent for ease of movement Cat No. Size Pack qty 11558102 S 1 11568102 M 1 11578102 L 1 11588102 XL 1 11598102 XXL 1 SPECTACLES, SAFETY, 3M™ SECUREFIT™ 200 SERIES 3M SECURE FIT SF400 SERIES SAFETY SPECTACLES • Design provides excellent coverage and good field of vision • Offers excellent protection against ultraviolet (UV) radiation • Lightweight and comfortable design (18g) • Good impact resistance with anti-scratch coating for improved durability • Special anti-fog coating which reduces fogging and ensures clearer vision • 3M Pressure Diffusion Technology allows temples to naturally adjust to individual head sizes • Self adjusting feature eliminates need to stock multiple frame sizes at worksites • Secure, snug fit keeps eyewear in place without slippage even when the person is in motion • Combines well with 3M™ 9300 Series respirators • Optical class 1 lens suitable for prolonged use • Design provides excellent coverage and field of vision • Protection against UV radiation • Lightweight design (19g) • Adjustable nose pads for secure and personalised fit • Soft-touch dual moulded temples for increased comfort and grip Cat No. Size Pack qty 15282025 Safety spectacles, SecureFit™, clear, anti-scratch/anti-fog 1 22 RESPIRATORS, 8000 SERIES (CLASSIC) Cat No. Description 15371994 3M SecureFit 400 Protective Eyewear, SF401AF-EU, Clear PC 15391994 3M SecureFit 400 Protective Eyewear, SF402AF-EU, Grey PC 15302004 3M SecureFit 400 Protective Eyewear, SF403AF-EU, Amber PC 15322004 3M SecureFit 400 Protective Eyewear, SF408AS-EU, Mirror blue PC 15312004 3M SecureFit 400 Protective Eyewear, SF410AS-EU, Mirror I/O PC www.eu.fishersci.com ESSENTIALS ARCTIC A28 REFRIGERATED CIRCULATORS THERMO SCIENTIFIC™ HAAKE VISCOTESTER™ 550 By its design, the Thermo Scientific HAAKE Viscotester 550 is a Searle viscometer. A rotational speed is preset and the flow resistance of the sample is measured, in other words, the torque required to maintain the set speed is proportional to the viscosity. From the torque required, the set speed and the geometry factors of the applied sensor, all final information on the viscosity, shear stress and the shear rate is calculated. The results are displayed digitally and can be printed simultaneously • Speed range: 0,5 rpm to 800 rpm • Uncertainty: +/-0,1% • CD Mode: 0,0125 rpm • Torque Range: – up to 400 rpm: 0,1 mNm to 30 mNm – up to 800 rpm: 0,1 mNm to 20 mNm • Uncertainty: +/-0,5% FSD • Temp. range: -50 °C to +250 °C depending on measuring system • Interface: RS232C Cat No. Description 10474963 Thermo Scientific Haake Viscotester 550 The Thermo Scientific™ refrigerated bath circulator provides efficient cooling for open and closed applications, with temperatures ranging from −40° to +200°C and maximum bath volume of 12 litres. Powerful bath circulator with a stainlesssteel reservoir that can be configured with six controller options allowing you the flexibility to choose the right model for your application Cat No. Cooling capacity, W Capacity, L Temperature range Pressure Temperature stability 10679979 300 10 -28°C to 100°C 17L/min, 300mbar ±0,02°C 11630931 800 12 -28°C to 150°C 20L/min, 475mbar ±0,01°C Whatever your application Fisherbrand has a solution for you BATH, ISOTEMP Low-profile model enables easy bath access when lab counter height presents a challenge. Seamless stainless-steel tanks guarantee durability and easy cleaning. Robust refrigeration system ensures that samples and applications can be cooled quickly. Fine-tuned refrigeration metering allows for excellent temperature stability at all times. • The robust refrigeration system ensures that your samples and applications can be cooled quickly • Stainless steel tanks for durability and ease of cleaning • Fine tuned refrigeration metering for excellent temperature stability • Inlet/outlet connections for external circulation included • Work area cover included • Bath drains are located on the front of the unit • Capacity: 1,2kW • Weight: 35,8kg • Pressure: 17L/min, 310mbar • Pump type: Force Cat No. Cooling capacity, W Capacity, L Temperature range Temperature stability 11306651 500 6,8 to 8,6 -28°C to 150°C ±0,05°C Centrifugation Chromatography Cryogenics Electrophoresis Lab storage Liquid handling Microscopy Mixing pH and electrochemistry Safety Temperature maintenance For the full range visit www.eu.fishersci.com/go/fisherbrand www.eu.fishersci.com 23 ESSENTIALS ARCTIC REFRIGERATED CIRCULATORS WATER BATHS • Temperature range from ambient to 99,9°C • Temperature stability ±0,1°C and temperature uniformity ±0,05°C at 37°C • Bright LCD controller with icon driven menu • Stores three preset temperatures • Automatic timer with option to set time to start procedure • Global voltage - one part number works anywhere in the world • Audible alarms help protect your work • General purpose water baths include a polycarbonate gabled lid • Shaking water baths with reciprocal oscillation from 30 to 200 oscillations per minute, include stainless steel gable cover, shaking tray The Thermo Scientific™ refrigerated bath features a large work area, enabling high throughput and workflow efficiency, with temperatures ranging from −5° to +100°C and maximum bath volume of 30 litres. Configure your refrigerated bath with a Thermo Scientific STANDARD or ADVANCED controller that meets your specific application needs. Cat No. Cooling capacity, W Capacity, L Temperature range Pressure Temperature stability 10597485 200 12 to 20 -5°C to 100°C 17L/min, 300mbar ±0,02°C 10048434 250 17 to 20 -10°C to 150°C 17L/min, 300mbar ±0,02°C Cat No. Description 15385877 General purpose water bath 10L 15305887 General purpose water bath 28L 15325887 Shaking water bath, 15L 15335887 Shaking water bath, 27L BATHS, CIRCULATORS, HEAT-REFRIGERATED, CLOSED SYSTEM • Full range heating and cooling from -10°C to 80°C • Small reservoir ensures fast temperature response time • Small footprint • Quiet operation • Intuitive user interface allows user to choose between five temperature set-points • Temperature range: -10 to 80°C • Capacity: 2,8L • Stability: ±0,1°C • Heater capacity: 2000W • Dimensions [w x d x h], mm: 227 x 436 x 619 • Mass: 29,9kg UBBELOHDE VISCOMETERS (ASTM) • In accordance with ISO 3105, ASTM D 2515, ASTM D 446 • Filling quantity: 15 to 20 ml Cat No. Viscosity, mm2/s 10508811 60-300 10365051 0,35-1 10400883 0,6-3 Cat No. Pump pressure, mbar Pump flow, max., L/min Cooling capacity, W (at 20°C) 12028173 2-10 12019907 300 17 250 10018570 200-1000 11336661 800 21 500 10598801 600-3000 10325151 2000-10000 10490873 6000-30000 RECIRCULATING CHILLERS ISOTEMP • Compact line of refrigerated recirculating chillers with cooling capacity of 700W • Ideal for laboratory applications that require higher cooling and pumping capacities. • Full range of heating and cooling from -10°C to +30°C • Intuitive digital controller for ease of use • Customer controlled high and low temperature alarm limits • Small footprint and quiet operation • Stability ±0,1°C (models I and II), ±0,5°C (model III) • Three pump options for a variety of application requirements ion ology Inoculat Microbi Surface Sample g Samplin brand • Fisher r • Greine n • Sterili Sterilin Scientific • Thermo g t Samplin Produc ranch - Dip slides system multib - Filtration re - Plastic labwa - Samplers - Bottles tubes - Centrifuge Description 11396631 Isotemp I Chiller PD-1 Pump, 230V/50Hz, Fisherbrand 11326641 Isotemp II Chiller PD-2 Pump, 230V/50Hz, Fisherbrand 24 Scientific • Bibby • Carl Zeiss ific Scient • Fisher brand • Fisher gen • Invitro pling ius • Sartor o Scientific • Therm on estructi ation/D Sterilis • 3M • Anios • Ansell • Bolle • Brady • Du Pont 14 www.eu.fishersci.com y meters - Cell densit cell counters - Colony and coverslips - Slides and ers ts safety cabine ners - Class II waste contai oes - Clinical and oversh - Coveralls s and sanitisers - Disinfectant - Facemasks - Autoclaves bags - Autoclave indicators - Sterilisation - Gloves - Glove boxes protection - Respiratory labels - Warning brand • Fisher rly-Clark • Kimbe • Labconco • Microflex • Plas Lab o Scientific • Therm WORKFLOW g Countin - Air sampl • BD Difco* brand • Fisher • Brady g • Cornin brand • Fisher rr enics • Liebhe ourne Cryog • Stateb • Tenak o Scientific • Therm Scientific • Bibby brand • Fisher • Grant ert • Memm • Plas Labs o Scientific • Therm Air Sam Safety Cat No. jars - Anaerobic - Glove boxes ical incubators - Microbiolog tors incuba - Shaker • Grant • Kinematica • Labconco ert • Memm • Plas Lab • Pyrex • Retsch • Sartorius Sterilin Scientific • Thermo Scientific • Thermo ton Whea • ius • Sartor o Scientific • Therm • Bürkle lin • Gosse • Labconco readers - Barcode systems - Cryostorage - Dewars / Freezers s (microplates, - Fridges consumable - Storage boxes) freezer cryotubes, temperature - Ultra-low ion Incubat • Brady • Falcon Scientific • Fisher • Fisherbrandcare • GE Health • Gosselin manifolds ge ryostora Storage/C - Petri dishes rinders - Stomacher/g ners - Water baths universal contai or - Apyrogen Sterilin - Quickstart e - Orina tubes and transfer pipett - Serological dishes - Contact - Dip slides - Swabs Water & burners spreaders - Bunsen loops and - Inoculating s - Spiral plater tubes Sterilin - Round bottom Scientific • Thermo Scientific • Thermo • Falcon • Fisherbrand • Gosselin n Preparatio - Balances - Centrifuges to-use media ready- Dry and - Glassware - Glove boxes r s - Label printe and filtration device - Membranes • 3M Scientific • Fisher - Antibiotics - Antisera s - ATCC strain - Chemicals • Acros • Brady • Carl Zeiss d access in some • Motic • Schott o Scientific • Therm • UVP s EU countrie SOLUTIONS Genomics • • Bioproduction Histopathology • • Microbiology dies Stu Proteomics • Water Analysis teo•mic Chromatography •Pro • Physical Analytical Chemistry Cell biology • • Safety taining ation/S Identific brand • Fisher o Scientific • Therm * restricte tometers - Spectropho copes - Stereomicros ical stains - Microbiolog s - Microscope - Rapid tests coverslips - Slides and brand • Fisher b Diagnostics • Pro-La o Scientific • Therm 2016 c Studies Genomi 15 COLORIMETERS, MELTING POINT APPARATUS RECIRCULATING CHILLER, THERMOCHILL II LOW RANGE WITH MD PUMP, THERMO SCIENTIFIC MELTING POINT APPARATUS, SMP20, • Temperature range from -10°C to 30°C • 900W cooling capacity (at set point and ambient temperature of 20°C) • Temperature stability ±0,01°C • Accessible fill port on the top of the chiller for easy filling • Magnetically driven pump delivers high flow rates at low pressure making unit ideal for use with laboratory glassware and other low back-pressure applications • Pressure gauge located on control panel for easy viewing of application pressure • Easy to use, intuitive controller with a plug-and-play design that allows you to be up and running in minutes • High and low temperature alarms Cat No. Description 15271418 Recirculating chiller, ThermoChill II Low Range with MD pump, Thermo Scientific • Digital selection and display of temperature • Accuracy 0,1 degree resolution • Easy to operate with plateau facility • Ideal for educational use Pa r t o f B i b b y S c i e n t i f i c Cat No. Description 15169722 Melting point apparatus SMP20 with digital 0,1°C resolution COLORIMETERS • Integrated RCMSi Technology for Remote Calibration • Automatic and non-subjective colour measurement • Consistent data compliant with international standards • Very rugged, chemically resistant, steel construction • Easy maintenance with removable sample chamber • Ability to handle hot samples with high melting points • Extensive and flexible choice of colour scales • Remote upgrade facility • Calculation and description of «off-hue» status • Supplied with colour control software for data analysis • Conformance standard, cells and spare bulb included • Output conforming to GLP including date, time, sample & user ID • Accommodates a wide range of sample cells and tubes • Extensive range of accessories (e.g. thermal printer) • 153mm (6’’) sample chamber guarantees compliance with AOCS, ISO and ASTM standards • Optional integrated heater unit Cat No. Description 13585290 Colorimeter oils, fats, waxes and transparent liquids 11370992 Colorimeter oils, chemicals and derivatives 12813223 Colorimeter mineral oils, waxes and petrochemicals Workflow Solutions • 10 workflows that cover all applications • One page dedicated to personal protection because your safety is crucial for us • A list of key products offered by our main partners Available on: eu.fishersci.com www.eu.fishersci.com 25 ESSENTIALS COLORIMETERS BENCHTOP SPECTROPHOTOMETER FOR COLOUR MEASUREMENT NC45 SPECTROCOLORIMETER LC 100 • For the colour measurement of many types of wet and dry samples including powders, pastes, gels, plastics and paints • Non-contact colour measurement allows sample measurements from a distance, eliminating surface distortion caused by contact based measurement methods • Full system LED illumination provides years of reliable performance • LED illumination is unaffected by ambient light conditions • Line of Sight™ visibility to the sample enables technicians to quickly and easily position the sample for measurement • Active Visual Targeting(TM) projects a prominent illuminated target ring onto the sample for precise and accurate measurements • Dual measurement spot sizes, 6mm (1/4’’) and 12mm (1/2’’) which can quickly and easily be switched without the need to recalibrate • Integrated gloss sensor provides 60Â° correlated gloss values • Versatile design improves measurement capabilities on two and three dimensional objects • Flexible quality control software allows user customisation (provided separately) • Hand-held imaging spectrocolorimeter • Combines with unique housing stand to protect sample from ambient light • Enables measurement of food, powders, cosmetics & pastes • Versatile communication of colour measurement • Single, simple, reliable, integrated tool - no need to connect to PC • Readings and comparison charts within seconds • Information on colour and surface texture effects • Conformance reports in PDF and Excel formats • Precise image sampling with 9 band accuracy Cat No. Description 15564283 Spectrocolorimeter LC 100 Description 15554283 Spectrophotometer for colour measurement NC45 LC 100 & SV 100 SPECTROCOLORIMETER PHOTOMETERS MD 600 & 610 • The Lovibond™ LC 100 and SV 100 integrated package provides a unique solution to users looking to measure food, powders, cosmetics and pastes. • The SV 100 holder supports the LC 100 at an ergonomic viewing angle to enable the measurements in Lovibond™ optical cells. A secure cap is provided to cover the sample, protecting it from any excessive ambient light, enabling quick yet accurate readings. • The units are provided in a purpose-designed case containing all the accessories required for accurate colour measurement expected of the Lovibond™ brand. • The Lovibond™ LC 100 enables setting and maintaining colour standards throughout the manufacturing process. It is a lightweight tool that is easy to handle and ready to use. In just over a second, it not only provides a reading of the sample but also a report telling how close the colour is to a measured standard. Together with the Lovibond™ SV 100, it is the ideal solution for the colour measurement of food, powder, cosmetics, pastes and pharmaceuticals. • The LC 100 automatically creates conformance reports in either PDF or Excel formats for each stored sample against each standard. These can easily be shared with a PC or directly to a compatible printer (via USB mass storage mode). The MD 610 and MD 600 give you mobile devices in a modern design with the analytical features of laboratory photometers. All important water analysis parameters from A(luminium) to Z(inc) are covered by these two devices. Combined with the high precision of Lovibond™ reagents, a reliable and quick analysis of water samples is guaranteed. Reagent tablets, powder reagents, liquid reagents, or cuvette tests are used depending on the method. Six long-lasting LEDs serving as a light source in combination with interference filters guarantee the highest precision. The devices are designed without moving optical parts and thus have a maintenance-free measuring unit. Up to 1,000 data records can be stored in both the MD 610 and the MD 600. The AquaLX™ app, available free of charge, offers the possibility of transferring measurements to smart phones or tablets via Bluetooth™. The data management then enables analysis and export as a CSV file or graph via email. The app is available free of charge for Android™ and iOS™. The proven MD 600 photometer uses the classic infrared interface with which data can be transferred by means of the IRiM module to the PC or laptop. • Optics: LEDs, interference filters (IF) and photo sensor in transparent sample chamber • Wavelength range: 430 nm IF ∆ = 5 nm 530 nm IF ∆ = 5 nm 560 nm IF ∆ = 5 nm 580 nm IF ∆ = 5 nm 610 nm IF ∆ = 6 nm 660 nm IF ∆ = 5 nm IF = interference filter • Wavelength Accuracy: ± 1 nm • Photometric Accuracy: 2% FS (T = 20°C – 25°C) • Photometric Resolution: 0,005 A Cat No. Description 15360815 LC 100 & SV 100 Spectrocolorimeter 26 Cat No. Cat No. Description 15348314 Infrared1 (MD 600) 15564273 Bluetooth™ 4.0 (MD 610), iOS™ and Android™ app for data management and email delivery www.eu.fishersci.com PH METERS PH/MV, BENCH METER PLUS CONDUCTIVITY, BENCH METER PLUS • Intuitive Operation – Measurement Made Easy Featuring a large, well-structured display for easy viewing, the instruments’ intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks • Compact Design – Save Space Thanks to its compact design, little bench space is needed for the Five series meters. The sensor holder can be easily removed and stored on the side of the meter after use • Fast Connectivity – Simple and Secure Data Transfer The FiveEasy Plus series meters allows data to be exported either directly to a printer or a PC for further processing using its RS232 or USB ports. • Large Display – All at a Glance The well-arranged screen with self-explanatory icons shows all information needed such as measurement data, sensor status and current calibration • Measuring range (pH): -2,00 to 16,00 • Resolution/ accuracy (pH):0,01 /0,1 / ± 0,01 • Calibration points: 5 • Temperature range: 0 to 105°C • Temperature Resolution/Accuracy: 0,1 / ± 0,3°C Cat No. Ideally suited for Pack qty 15563360 Wide range of samples including emulsions and suspensions 1 • Intuitive Operation – Measurement Made Easy Featuring a large, well-structured display for easy viewing, the instruments’ intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks • Compact Design – Save Space Thanks to its compact design, little bench space is needed for the Five series meters. The sensor holder can be easily removed and stored on the side of the meter after use • Fast Connectivity – Simple and Secure Data Transfer The FiveEasy Plus series meters allows data to be exported either directly to a printer or a PC for further processing using its RS232 or USB ports. • Large Display – All at a Glance The well-arranged screen with self-explanatory icons shows all information needed such as measurement data, sensor status and current calibration • Measuring range (cond): 0,01µS/cm to 500mS/cm • Resolution/ accuracy (cond): 0,01µS/cm to 500mS/cm • Salinity range: 0,00 to 42psu • TDS range: 0,01mg/L to 300g/L • Temperature range: 0 to 105°C • Temperature Resolution/Accuracy: 0,1 / ± 0,3°C 15573360 Fast results in aqueous samples such as acids, bases etc. 1 Cat No. Ideally suited for Pack qty 15583370 Small samples in vials and test tubes 1 15533380 Aqueous samples with mid to high conductivity 1 PH/ION. S220 SEVENCOMPACT METER The Mettler Toledo SevenCompact™ meter is the perfect choice for a wide range of applications, measuring pH, ORP and ion concentration in various units. The new colour display with its well designed icons and menu settings in 10 languages makes operation intuitive. Applications range from routine measurements through sample analysis, data handling and data archiving in compliance with GLP regulations. Simple innovative design that meets the requirements for a universal, easy to operate pH/ion meter. The included electrode holder with the perfectly vertical uPlace™ movement helps you bring your electrode into the position where it works best for your sample. This allows for faster measurements and reduces the risk of the sample vessel tipping over and/or damaging the sensor. SevenCompact™ gives you the choice to view all measurement information on the display or to focus on the essentials with the uFocus™ view. Switching between the different display layouts is easy, requiring only a single key press. This pH meter is suited for a wide range of applications; it can also measure ORP and ion concentration in various units. A single keypress is all that is required to start a measurement or calibration, toggle measurement modes or switch between displays. • Prominent colour display, the 4.3 inch high resolution colour display makes relevant information identifiable at a glance • Two display layouts, switch with a single key press between the full information screen or the uFocus™ layout • Intelligent sensor management (ISM™), helps eliminate mistakes by automatic identification of the sensor upon connection and ensures that the most recent calibration is used for future measurements • Automatic buffer recognition system allows routine calibrations to be carried out quickly without unnecessary error messages • Connectivity and peripherals, USB and RS232 interfaces allow you to connect various peripherals simultaneously including printers, barcode scanners and a stirrer Cat No. Measuring range Resolution Accuracy pH -2,00 to 20,00 0,001 / 0,01 / 0,1 ±0,02 mV -2000 to 2000 0,1/ 1 ±0,2 Ion concentration 1,00E-9 to 9,99E+9 ± last signifi. digit ±0,5% Temperature -30,0 to 130,0°C 0,1°C ±0,1°C Description and sensors 11384233 Basic kit : includes instrument, electrode holder, protective cover, operating instructions, quick guide, declaration of conformity and test certificate 11304233 Biotechnology kit : 11384233 but with InLab™ Routine Pro-ISM cable kit instead of InLab™ Expert Pro-ISM 15573423 Micro kit : 11384233 but with InLab™ Ultra-Micro instead of InLab™ Expert Pro-ISM CONDUCTIVITY, BENCH METER PLUS Measuring range Resolution Accuracy Conductivity 0,001μS/cm to 1000mS/cm 0,001 to 1 ± 0,5% Temperature -30,0 to 130,0 °C 0,1 °C ± 0,1 °C Cat No. Description and sensors 11314233 Includes instrument, electrode holder, protective cover,operating instructions, quick guide, with InLab™ 731-ISM, guide to conductivity measurements and 2 calibration sachets for 1413 μS/cm and 12,88 mS/cm declaration of conformity and test certificate www.eu.fishersci.com 27 ESSENTIALS BALANCES THERMO SCIENTIFIC ORION STAR A211 PH BENCHTOP METER Anyone can use this meter with its plain language screen prompts, soft keys that update for easy selection and a multilanguage interface that supports English, Spanish, French, Italian, German and Chinese • Don’t miss a reading – AUTO-READ™ locks in the stable reading on your screen, ready indicator alerts when readings are stable and timed reading gathers data in specific time intervals • Up to 5 point pH calibration with automatic recognition for USA/NIST and DIN buffers • Non-volatile memory holds up to 2000 data points with time and date stamp • Easily transfer data and keep meter software up-to-date with the USB and RS232 ports and complimentary data analysis software • Works with almost every AC power source with the included universal power adapter, or use four AA batteries (sold separately) to run the meter on DC power Measuring range Resolution Accuracy pH -2,000 to 20,000 0,001 / 0,01 / 0,1 ±0,02 mV/RmV -2000,0 to 2000,0 0,1 ±0,2 Temperature -5°C to 105°C 0,1°C ±0,1°C Cat No. Description 11661449 Thermo Scientific Orion Star A211 pH benchtop meter 10101121 pH combination electrode Sure-Flow glass body BALANCES, PRECISION AND ANALYTICAL, SECURA PH BUFFERS • Integrated protection systems for absolutely correct and reliable results • Avoid errors caused by an unlevel balance • The highest accuracy ensured by isoCAL automatic calibration and adjustment • USP-compliant weighing with SQmin • Selectable security levels to adapt the balance’s error response to your needs • GLP | GMP-compliant documentation with alphanumeric sample and batch identifiers • Customisable GLP | GMP header information • Safe and secure password protection • Traceable to NIST Cat No. Description 10545151 Buffer standard solution pH4.00 (phthalate), stabilised with 10ppm 500 mercury (II) chloride Pack qty 10082521 Buffer standard solution pH7.00 (phosphate), stabilised with 10ppm mercury (II) chloride 500 10082531 Buffer standard solution pH9.2 (borate) 500 Cat No. BALANCES, ANALYTICAL, EXPLORER™ SERIES •H igh resolution multi-lingual colour VGA touch display with icons for simple operation • P rogrammable multi-functional touch free sensors for cleanliness, speed and safety •M ultiple application modes plus library for storage of personal application settings Cat No. Capacity 120g 0,1g 220g 0,1g 11840113 320g 0,1g 11830113 220g 0,1g 320g 0,1g 28 Linearity, mg Pan size diameter, mm 210 1 1 2 120 310 1 1 2 120 13522970 510 1 1 2 120 15284247 610 1 1 2 120 13562970 1100 10 10 20 180 13572970 2100 10 10 20 180 13552970 3100 10 10 20 180 13582970 5100 10 10 20 180 13542970 120 0,1 0,1 0,2 90 13512970 220 0,1 0,1 0,2 90 Approved models 11850113 Repeatability, mg 13592970 Readability 11810113 Readability, mg 13532970 Unapproved models 11820113 Capacity, g www.eu.fishersci.com MOISTURE ANALYSERS, TITRATORS Cat No. Description 15305123 Moisture analyser MOISTURE ANALYSER MOISTURE ANALYSER MA35 Offering high value performance for all budgets and high quality durable construction with easy one-button setup, the MBS65 is ideal for users at all skill levels. With a large backlit LCD display, a standard RS232 port, 60g capacity, readability of 0,005g/0,05% and halogen heating, the Fisherbrand MBS65 offers full operational flexibility for many applications in food or wastewater analysis, quality control protocols or agriculture. • Large backlit LCD display and standard RS-232 port • Easy to clean heating chambers ideal for frequent use and inexpensive maintenance • Compact footprint designed to take up less laboratory space • Halogen heating technology • Repeatability (Std. Dev; g): 0,2% (3g sample), 0,05% (10g sample) • Certifications: FCC, CE • Warranty: Two years Ideal for daily routine use whether in production or in the laboratory, for quality control or for inspection of incoming raw materials. To ensure incredibly fast and effective sample heating the MA35 is equipped with two powerful metal rod dark infrared radiators. Easy to understand icons guide you in three steps from taring the sample pan to starting the measurement. All important operating parameters can be accessed and changed in seconds. • Readability, mg: 1 • Capacity, mg: 35 • Pan diameter, mm: 90 Cat No. Description 10601775 Moisture analyser MA35 KARL FISCHER REAGENTS • For Karl Fischer titration by volumetry The first address for* KF titration EAU OUV TitroLine® 7500 KF et 7500 KF trace ssible de vous tromper avec les eaux titrateurs TitroLine® KF de alytics roLine® 7500 KF est un équipement étrique généraliste pour un large ail d’utilisations et le TitroLine® 7500 ce est spécialisé dans les faibles teen eau. Ces deux nouveaux titrateurs actérisent par les spécifications suiv: TITRATORS TITROLINE™ KF 7500 apides, précis et faciles d’utilisation ffrant des méthodes standard pour fférentes applications (détermination du re, valeur nulle…) cran couleur lumineux permettant une cture quel que soit l’angle ou la distance émorisation des résultats via port USB u format PDF et CSV) sponible avec modules intelligents terchangeables (TitroLine® 7500 KF eulement) The TitroLine™ 7500 KF is the volumetric generalist for a wide range of use and the TitroLine™ 7500 KF trace is the specialist for low water contents. Both new titrators are to be characterized by following features: • Fast, easy and precise • With standard methods for different applications (titer determination, blank value…) • High visible full color display, that can be easily viewed from a distance and extreme angles • Storage of results via USB port ,(PDF– and CSV -format) lleure adresse de titration KF TitroLine™ 7500 KF TitroLine™ 7500 KF trace Measuring range 10 ppm – 100 % 1 ppm – 5 % (10 µg – 100 mg) Accuracy Dosing accuracy: < 0,15 % 0,3 % at 1 mg water Number of user methods 50 50 Applications KF volumetry, dead-stop-titrations KF colometry, bromine number (SO2, bromine number) Cat No. Description 13486768 Volumetric KF-Titrator, scope of supply: titrator unit, interchangeable module WA 10, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1770, micro-dual platinum electrode KF 1100 and starter kit, power supply 100-240 V 13596600 Module 2, coulometric KF-titrator, scope of supply: titrator unit, generator electrode TZ 1752 without diaphragm, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1754, micro-dual platinum electrode KF 1150 Cat No. Description Pack qty 10181570 Karl Fischer Aqualine™ Complete 5 1L 10092042 Karl Fischer Aqualine™ Complete 5K 1L 10205592 Karl Fischer Aqualine™ Matrix K 1L 10528810 Karl Fischer Aqualine™ Titrant 5 1L 10609672 Karl Fischer Aqualine™ water standard 5mg 500mL SPECTROPHOTOMETER, THERMO SCIENTIFIC™ GENESYS™ 10S The Thermo Scientific GENESYS 10S UV-Visible spectrophotometer is a robust and reliable UV/Vis instrument which is designed to be easy to programme and easy to use. This compact instrument offers locally controlled functionality together with USB outputs for data export and, single and multisampling capability as standard. • Lamp: Xenon Flash Lamp • Optical design: dual beam - internal reference detectorr • Photometric linearity: 3,5 Abs • Spectral bandwidth: 1,8nm • Stray light: <0,08%T at 220, 340nm (NaI, NaNO2) <1<1,0%T 198nm (KCl) • Voltage: 100/240V • Wavelength range: 190 to 1100nm • Wavelength scan speed: 3600nm/min Cat No. Description 12104972 Spectrophotometer, Thermo Scientific™ GENESYS™ 10S www.eu.fishersci.com 29 ESSENTIALS REFRACTOMETERS, BOD, OXIDATION CUVETTES, DISPOSABLE, POLYSTYRENE REFRACTOMETERS RFM900-T • Easy clean prism • Wide range: 1,30 to 1,70 RI • Standard RI and Brix range • User scale library • Up to 6 decimal places RI • Wide temperature range • Peltier temperature control • SMART temperature stability • Auto read function • Transparency Approximately 90% between 400nm and 800nm • Range, nm: 336 to 850 • Lightpath, mm: 10 • Dimensions [w x h], mm: 12,5 x 45 Cat No. Description Capacity, mL Pack qty 11537692 Macro 4 100 11547692 Semi-micro 1,6 100 11847832 Semi-micro 1,6 1000 Angular ISS (°Z) Range -355 to + 355 selectable -225 to +225 Resolution 0,01/0,001 0,01/0,001 Reproducibility 0,002 0,005 Accuracy ±0,01 ±0,03 Beam Diameter 4mm 11944249 ADP440+ digital polarimeter supplied with one centre filling tube (200mm), pack of three RFID tags, instruction manual and certificate of conformity. Bod sensor 6 230V/60HZ 30 ±0,0001 ±0,0002 Sugar (°Brix) ±0,1 ±0,02 Refractive Index ±0,00005 ±0,000005 Sugar (°Brix) ±0,05 ±0,005 Temperature Sensor Accuracy ±0,03°C Sample Temperature Stability ±0,02°C Description 11990058 RFM960-T Peltier temperature controlled refractometer with latest integral 7” full colour touch-screen, high definition display and USB/LAN connectivity. Supplied with pack of two RFID tags, instruction manual and certificate of conformity. 15563423 RFM970-T Peltier temperature controlled refractometer with latest integral 7” full colour touch-screen, high definition display and USB/LAN connectivity. Supplied with pack of two RFID tags, instruction manual and certificate of conformity. OXIDATION STABILITY REACTOR OXITEST The BOD Sensor Systems comprise of a six or ten position stirring unit complete with BOD sensors, alkali holders for absorbing the carbon dioxide and stirring bars. The instrument represents a complete solution for the user. It is immediately operational for measuring the BOD on four scales 90ppm, 250ppm, 600ppm and 999ppm. The sample quantity to be examined varies from 100mL to 400mL, the bottles total capacity being 500mL. The compact, easy to handle design means that six or ten BOD bottles can be housed in a small amount of space. Features a stirring system offering non stop operation without the risk of shut off or overheating. • Complete system for BOD analysis • Analysis performed over weekends: the BOD sensor automatically stores five BOD measurements at 24hr intervals Bod sensor 6 230V/50HZ Refractive Index Cat No. BOD ANALYSIS SENSORS 15369494 0,01/0,001 5-40 °C Description Description 0,000001 0,1 4 – 30 seconds (selectable) Cat No. 12754536 0,0001 Sugar (°Brix) Precision Specifications Cat No. Refractive Index Accuracy • Multiple scales • Temperature display • Optical density display • Temperature compensation • LED/Interference filter • Parallel printer port • RS232 x 2 (refractometer/PC/barcode) • Barcode reader • High resolution LCD display • Conforms to USP/EP/BP/JP Reading Time RFM970-T Resolution POLARIMETER ADP440 Temperature RFM960-T • Prediction of the oxidative stability during shelf-life studies tests the product at defined time intervals; builds an experimental curve • Evaluation of the adequacy of storage conditions • Evaluation of the best packaging solution • Comparison of the oxidative stability of different formulas for food preparations • Evaluation of the oxidative stability of vegetable oils of different botanical origin • Evaluation of the effectiveness of antioxidants • Information on product oxidation when the oxidation flex is not visible especially useful for products with a low fat content (4-5%) product oxidation can be achieved by combining the OXITEST with GC • Oxidative stability test of incoming raw materials and outgoing finished products Cat No. Description 11743479 Oxidation stability reactor Oxitest www.eu.fishersci.com KJELDAHL, FURNACE, MICROSCOPE KJELDAHL DIGESTION UNIT KJELDAHL DISTILLATION UNIT Traditional Kjeldahl Digestion Units for nitrogen analysis and protein determination, with an aluminum heating block that offers an excellent thermal homogeneity, with a maximum working temperature of 450°C. • Epoxy painted with chemical resistant coating • 6-position for 250mL test tubes (Ø 42mm) • Temperature range: ambient to 450°C / 842 °F • Selectable ramps: up to 4 per program • Temperature Calibration: automatic • Stability of the heating block temperature: ± 0,5 °C • Precision of the heating block temperature: ± 0,5 °C • Digestion time range: 1 to 999 minutes • Time selection: 1 minute steps Cat No. Description 11761164 Kjeldahl Digestion Unit Entry-level Kjeldahl distillation unit for your analyses covering different applications such as determining ammoniacal nitrogen, protein determination, nitrogen content (Kjeldahl or direct alkaline distillation), nitric nitrogen (after reduction/Devarda), phenols, volatile acids, cyanides and alcohol content. • Corrosion-resistant technopolymer • Time related to start for Devarda alloy analysis: 0 to 99 min • Reproducibility (RSD): ≤ 1% • Recovery: ≥ 99,5% at nitrogen levels between 1 and 200 mg N • Detection Limit: ≥ 0,1mg N • Distillation time: 5 minutes to collect 100 mL of distillate • Sodium hydroxide addition: automatic • Sodium hydroxide volume: 0 to 100 mL • Tap water consumption: from 0,5L/min at 15°C – from 1L/ min at 30°C Cat No. Description 11795664 Kjeldahl Distillation Unit SOLVENT EXTRACTOR MICROSCOPE A1 COMPOUND Solvent extraction system suitable for the separation of a substance or a group of elements from solid and semi-solid samples according to the Randall technique. • epoxy painted stainless steel structure • 3 positions • Reproducibility (RSD): ≤ 1% • Solvent recovery: from 50 to 75% • Max volume extraction cup: 150mL • Number of programs: 29 • Working temperature: from 100 to 260 °C • Cooling water: 2L/min • Sample quantity: from 0,5 to 15g (generally 2-3 g) • Solvent volume: from 30 to 100mL Cat No. Description 10787708 Solvent Extractor The microsope is highly ergonomic, easy to operate and has brilliant image quality for versatile biomedical applications. Reliable microscopic images are crucial, particularly in laboratory use. With the Axio™ Lab.A1 you are guaranteed to work with a microscope that combines maximum performance and cost effectiveness. The special plus for long term microscope users is TUV approved ergonomics. The Axio™ Lab. A1 has been designed for daily laboratory applications. Users in microbiology, cytology, haematology and pathology labs as well as college, industry and university labs will benefit particularly. All applications in brightfield, darkfield, phase contrast or fluorescence can be performed readily with the full range of ZEISS ICS objectives. A number of attractive features are designed to guarantee quick and reliable handling and ease of use, including predefined configurations. Additional configurations and accessories including daylight and warmlight LED illuminators are available on request. • TUV approved ergonomic configuration for maximised comfort and a stress free working position • Convenient position of all main operating elements and the use of soft touch, tactile materials • High quality material: the stand is made of metal and all operating elements are coated with a special tactile material compound • Long term durability through the use of high quality materials • Excellent optical quality for reliable results • Numerous tubes, including multi-observation, and accessories for a wide range of applications • Transmitted light illumination: HAL 35 W, LED daylight or LED warmlight • The Axio™ Lab. A1 ensures easy to use fluorescence with 2 LED positions • Comfortable and convenient: all main elements are within the reach of one hand • Integrated tool bar on the back of the microscope • The new multi-discussion system from Carl Zeiss is compatible with Axio™ Lab.A1 MUFFLE FURNACES Thermo Scientific™ Thermolyne™ muffle furnaces offer heating solutions for a number of application needs. From general laboratory use to industrial applications, Thermolyne furnaces are ideal for fast heat up and temperature control up to 1100°C. Cat No. Capacity, L Temperature range, °C Temp. stability/Uniformity at 100°C Cat No. Description 10215522 1,3 100 to 1100 ±0,3°C/±7,8°C 11317170 Microscope A1 compound 10453152 2,1 100 to 1100 ±0,5°C/±5,0°C Accessories 11831900 Polariser D90° rotatable removable 11815023 Slider analyser D fixe 11844782 x 50 Frosted glass slide 76 x 26mm www.eu.fishersci.com 31 ESSENTIALS OVENS, CLIMATE CHAMBER, PUMPS OVENS, HEATING AND DRYING From simple drying of glassware to the most complex and carefully controlled heating applications, the Thermo Scientific™ Heratherm™ oven range includes an array of solutions to match your needs. Efficient • Surpassing energy efficiency, increasing cost effectiveness, reducing environmental impact • Unique door design reduces heat emission significantly • Timer for effective usage and additional energy savings • Space saving footprint without compromising volume • Flexible shelving system allows for optimal space utilisation Safe • Routine check upon startup for optimum performance levels • Temperature uniformity as good as ±2°C at 150°C Cat No. Model No Type Volume, L Dimensions, external [w x d x h], mm • Automatic audible and visual over temperature alarm • Access port for data logging with independent sensors Easy • Easy to read, large display • Easy setting with intuitive interface • Easy cleaning with rounded corners Temperature range, °C Timer General Protocol: 50 to 250 General Protocol: on/off Dimensions, internal [w x d x h], mm Mass, kg No. of shelves [max/ standard] Pack qty 10659650 OGS60 Gravity convection 65 530 x 565 x 720 328 x 415 x 480 42 13/2 1 10669650 OGS100 Gravity convection 105 640 x 565 x 820 438 x 414 x 580 53 16/2 1 10304150 OGS180 Gravity convection 176 640 x 738 x 920 464 x 589 x 680 66 19/2 1 10661751 OMS60 Mechanical convection 66 530 x 565 x 720 354 x 368 x 508 42 13/2 1 10794982 OMS100 Mechanical convection 104 640 x 565 x 820 464 x 368 x 608 53 16/2 1 10291870 OMS180 Mechanical convection 179 640 x 738 x 920 464 x 543 x 708 66 19/2 1 OVENS, UNIVERSAL CLIMATE CHAMBER ICH260L • Precise and homogenous temperature control independent of chamber volume and load • Temperature range up to +300°C • Forced air circulation •A ugmented functionality with convenient, approved and tested accessories •W orking chamber and housing constructed almost exclusively from high quality, corrosion resistant and easily cleanable stainless steel •A wide range of options for programming and documentation using interfaces, integrated data logger and AtmoCONTROL software • T hree year guarantee for appliances except wear and tear parts • T he temperature values of all universal ovens are measured according to DIN 12880: 2007-05 • Each universal oven is safety tested and CE marked In the ICH L climate chamber, stability tests in accordance with ICH guidelines Q1B, option 2, can be performed, thanks to an illumination unit. Fluorescent lights with cold white light (standard illuminant D65, 6,500 K) and UV radiation in the spectral range of 320 - 400 nm with a light intensity of approx. 8000 Lux serve as the light source • Intuitive and easy-to-use operating menu • Temperature and humidity ramps programmable via AtmoControl software • Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing • Peltier heating and cooling concept specifically adapted for a precise and homogenous temperature control • A wide range of options for programming and documentation using interfaces, integrated data logger and AtmoCONTROL software Cat No. Description 12646987 Universal oven UF55, single display with touchscreen, 1 grid, 230V 50/60Hz, 400mm x 400mm x 330mm (w x h x d), 53L volume 12626987 Universal oven UF55plus, twin display with touchscreen, 1 grid, 230V 50/60Hz, 400mm x 400mm x 330mm (w x h x d) 53L volume 12616997 Universal oven UF110, single display with touchscreen, 2 grids, 230V 50/60Hz, 560mm x 480mm x 400mm (w x h x d) 108L volume 12626997 Universal oven UF110plus, twin display with touchscreen, 2 grids, 230V 50/60Hz 560mm x 480mm x 400mm (w x h x d) 108L volume Cat No. Capacity, Temperature L range, °C Resolution Dimensions, interior, Dimensions, exterior, W x H D, mm W x H D, mm 13467689 260 0,1°C 640 x 800 x 500 10 to 60 824 x 1552 x 734 GP1000 PERISTALTIC GENERAL PURPOSE PUMP SYSTEM Easy to maintain • Pump head enables rapid tubing changes • Robust motor and drive system provides low-maintenance long-term operation • Contamination free pumping—the fluid contacts only the tubinWg material Easy to use W • Intuitive control keypad • Stop and start from the front panel • Easily increase/decrease flow through the membrane key-pad • Universal voltage and frequency capability allows operation world-wide— IEC320 socket provided • R eversible pump direction permits purging of tubing prior to use •Q uick start guide included for fast easy set-up Diverse performance range •U tilizes various tubing sizes to provide a broad flow range •A bility to pump against pressure up to 60 PSIG providing longer filtration cycles Cat No. Description 15377547 GP1000 Peristaltic General Purpose Pump System 32 www.eu.fishersci.com Ergonomic design • Space efficient—low-profile, stackable design • Safety interlock powers unit down when changing tubing • Remote control capability—ideal for automated process applications • Accurate, reliable control of flow and dosing— digital display of RPM for accurate control • Flow Capacity (mL/min): 0,5 to 3000 • RPM: 4 to 400 • Reversible: Yes • Operating temperature: 0 to 40°C (32 to 104°F) • Dimensions (L x W x H): 31,7 x 27,9 x 15,2 cm • Shipping weight: 7kg PUMPS, THERMOMETERS, TIMERS DP2000 DISPENSING PUMP SYSTEM The DP2000 is a peristaltic pump system, offering superior performance with precision and ease-of-use. Designed to handle a wide range of fluids, from the highest purity to extremely caustic solutions, this pump is used in a broad range of critical applications, from agriculture to chemical processing; and from beverage dispensing to semiconductor polishing. Reversible pump direction permits purging of tubing prior to use. • Programmable, easy-to-use, low maintenance • Utilises various tubing sizes providing a broad flow range • Available tubing materials comply with global pharmaceutical, sanitary and food standards (USP, EP, FDA and NSF) • Digital display • Flow Capacity (mL/min): 0,5 to 3000 • RPM: 4 to 400 • Voltage (50/60 Hz): 115/230V AC (auto selected) • Materials: Housing, ABS; Pump head, GF Nylon, Delrin™, Stainless steel, Cold-rolled steel, Buna N, Polycarbonate • IP rating: IP31 • Controller dimensions (L x W x H), mm: 317 x 279 x 152 • Compliance: Complies with stringent safety standards of UL, ETL, CE, C1 and with RoHS and WEEE directives Cat No. Description 15397547 DP2000 Dispensing Pump System TRACEABLE™ SENTRY™ THERMOMETER • Simple one-key reset operation resets MIN/MAX memories • Constantly monitor high, low and current temperatures • Sensor and 3m cable may be placed underwater, in refrigerator or in freezer • Unplugging the cable activates a sensor inside the unit for monitoring ambient temperature • Supplied with battery, probe, 3m cable, wall mount, magnet, stand, Velcro™, Traceable™ Certificate Cat No. Range Resolution Accuracy Probe 11785843 -50 to 70°C (58 to 158°F) 1° ±1°C 5mm diameter and 19mm long TRACEABLE™ MEMORYCARD REFRIGERATOR/ FREEZER DATA LOGGING THERMOMETER TRACEABLE™ THERMOMETER, LOLLIPOP, STAINLESS STEEL • Temperature and humidity data logger with Min/Max memory and High/Low alarms • User-defined temperature observations can be made once per minute up to once every 720 minutes • Thermometer captures 5,9 million readings on removable SD card • USB memory card reader plugs directly into Windows and Mac - no software to install • Text report includes date/time of day and sensor readings • Alarm sounds and LED flashes when temperature rises above or falls below user-set trip points • Supplied with 256Mb SD memory card, memory card reader, batteries, magnetic strips, Velcro™, flip open stand, adaptor, Traceable™ Certificate • Featherweight, wide-range lab partner covers 99% of routine temperature measurement needs • Shock/waterproof unit delivers reading updates every second • One-key operation recalls MIN/MAX temperature results, °C or °F switchable • Supplied with battery, probe, probe cover with pocket clip, Traceable™ Certificate Cat No. Cat No. Description 11785853 Traceable™ Thermometer, Lollipop, Stainless Steel 13587070 Range -30 to 70°C (22 to 158°F) TRACEABLE™ INSTANTRECALL MEMORY TIMER Description 11775873 Traceable™ Instant-Recall Memory Timer Accuracy 0,1° ±5°C from 0°C to 25°C; ±0,6°C from 25°C to Stainless steel 70°C; ±1,2°C from -30°C to 0°C; and 50 to 70°C Probe TRACEABLE™ FINGERTIP TIMER • Features: count down, time in/out, alarm, memory • Intuitive, three-key programming makes this an all-time favourite for delivering countdown results • Input a time and the instant memory always returns the display to the programmed time • Extra-large, 16 mm-high digits • Timing capacity: 99 minutes, 59 seconds • Resolution: 1 second • Accuracy: 0,01% • Supplied with battery, Traceable™ Certificate Cat No. Resolution • Quick-to-program, three-key, countdown timer delivers errorfree operation for any lab test • Features: count down, time in/out, alarm • Impressive memory, remembers most recently programmed setting for recurring lab experiments • Supplied with battery, magnetic back, Velcro™, Traceable™ Certificate • Timing capacity: 99 minutes, 59 seconds • Resolution: 1 second • Accuracy: 0,01% Cat No. Description 11745873 Traceable™ Fingertip Timer www.eu.fishersci.com 33 ESSENTIALS TIMER, ULTRAPURE WATER SYSTEM TRACEABLE™ GIANTDIGIT™ COUNTDOWN TIMER TRACEABLE™ QC TIMER • Simple three-key use and large digits for easy viewing • Features: count up/down, alarm • Easy three key operation • Times set up to 20hr in 1min increments • At zero 1min alarm sounds • Very large 19mm LED digits • Timing capacity: 19 hours, 59 seconds • Resolution: 1 min • Accuracy: 0,01% • Supplied with battery, flip-open stand, magnet, Traceable™ Certificate Cat No. Description 11715873 Traceable™ QC timer ULTRAPURE WATER SYSTEM, BARNSTEAD™ GENPURE™ XCAD PLUS • View giant digits on your bench timer from across the lab • Features: count up/down, alarm, memory, stopwatch mode • 34mm digit height - viewable from 15m • Countdown and alarm on single channel for ease of use • Three button intuitive operation eliminates reading instructions • Automatic Bounceback™ memory for repetitive timing • Counts up during alarming indicating elapsed time since alarming • Counts up in stopwatch mode • Timing capacity: 99 minutes, 59 seconds • Resolution: 1 second • Accuracy: 0,01% • Supplied with stand, magnetic back, battery, Traceable™ Certificate Cat No. Description 11765863 Traceable™ GIANT-DIGIT™ Countdown Timer Gain flexibility in the lab with the new Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus ultrapure water system. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup. • Resistivity: 18,2MΩ·cm at 25°C • Conductivity: 0,055µS/cm • Flow rate: up to 2L/min. • Total organic carbon: 1 to 5ppb • Endotoxin concentration: <0,001EU/mL • Bacterial content: <0,01 CFU/mL • Temperature range: 2° to 35°C • Dimensions, W x D x H, mm: 372 x 330 x 615 Cat No. Description 15209335 Barnstead™ GenPure™ xCAD Plus Cosmetic Industry – Is chromatography analysis important to your process? Our chromatography solutions brochure features a comprehensive range of high quality and reliable products. Discover how you can validate a large range of parameters during all steps of your processes. Available on eu.fishersci.com 34 www.eu.fishersci.com CHROMATOGRAPHY PAPER, COLUMNS, SOLVENTS, VIALS HPLC COLUMNS CHROMATOGRAPHY PAPER CHR 100 • Flow rate: 145mm/30 min • Format: sheet • Grade: 501 • Film thickness: 0,19mm • Dimensions (L x W): 200 x 200mm • Fisherbrand™ CHR 100 grade of paper may be used in many applications where Whatman No. 1 CHR or Schleicher & Schuell No. 2043a are used Cat No. Description Pack qty 11718742 Chromatography paper CHR 100 100 • Surfactant Plus, ideal selectivity for simultaneous separation of anionic, nonionic, cationic and amphoteric surfactants • Ease of operation ensures optimal, fast separations • Accelerate sample throughput up to 30-fold compared to conventional LC, with Dionex RSLC Solutions • Hypersil GOLD Phenyl, exceptional peak symmetry and resolution Cat No. Description 12749825 HPLC Acclaim Surfactant Plus 3µm 3 x 150mm 12769795 HPLC Acclaim RSLC 120C18 2,2µm 3 x 75mm 10056364 HPLC Hypersil GOLD Phenyl 3µm 2,1 x 100mm VIALS, CRIMP TOP AND MICRO-INSERT, 11mm (WIDE OPENING) ND11 HPLC SOLVENTS Fisherbrand amber and clear glass crimp top and micro vials, suitable for use with the following autosamplers: Agilent, Carlo Erba, CTC, Dani, Fisons, Gerstel, Jasco, Perkin Elmer, Shimadzu, Spark, Thermo Scientific and Varian. • HPLC grade quality Cat No. Description Pack qty 10407440 Acetonitrile, for HPLC 2,5L 10499560 Methanol, HPLC for gradient analysis 2,5L 10598800 Heptane, for HPLC, approx. 99% n-Heptane 2,5L 10264350 Tetrahydrofuran, for HPLC, unstabilised 2,5L Cat No. Description Capacity, mL Dimensions, mm Pack qty 11535884 Clear glass crimp vial wide opening, graduated with marking spot 1,5 11,6 x 32 100 11545884 Amber glass crimp vial top 11mm wide opening with labelling and filling lines 1,5 11,6 x 32 100 CAPS, CRIMP, ALUMINIUM, 11MM WITH 5,5mm CENTRE HOLE FILTER UNITS, SYRINGELESS MINI-UNIPREP Distributor GE Healthcare Cat No. •All in one filtration process allows you to process sample loads in a third of the time • Three consumables in one unit: syringe, filter and flask • Six filtration steps in one with the six position compressor • Compatible with most major autosamplers Description • Clear aluminium cap lacquered Cat No. Description Thickness, mm Hardness Pack qty 10204712 With nat.red-orange rubber/ butyl red/ TEF transparent 1,0 45° shore A 1000 Pack qty Mini-UniPrep™ syringeless filtration system, standard cap, translucent housing 11388734 0,2 PVDF 100 11398734 0,2 Nylon 100 11308744 0,2 PTFE 100 11308754 0,2 RC 100 11338744 0,45 PVDF 100 11368744 0,45 Nylon 100 11378744 0,45 PTFE 100 11305124 0,45 RC 100 COMPRESSOR MINIUNIPREP 6 COMPRESSORS Distributor GE Healthcare • All in one filtration process allows you to process sample loads in a third of the time • Three consumables in one unit: syringe, filter and flask • Six filtration steps in one with the six position compressor • Compatible with most major autosamplers • Material (housing): polypropylene • Material: PTFE coated silicone rubber • For use with: Mini-UniPrep G2 syringeless filters Cat No. Description 11318724 Compressor mini-uniprep 6 monsters www.eu.fishersci.com 35 LIFE SCIENCE APPLICATIONS INCUBATORS, PETRI DISHES, LOOPS, SPREADERS INCUBATORS, CO2 THERMO SCIENTIFIC™ FORMA™, STERI-CYCLE™ I160 PETRI DISHES, POLYSTYRENE A direct heat CO2 incubator that better supports you and your science. The incubator delivers the performance reliability, ease of operation, and value required to support a range of culturing needs from basic research to demanding, leading edge applications, so you’re ready for whatever comes next! • 165L (5,8 cu ft) in a compact foot print, readily stackable • Choice of electropolished stainless steel or 100% pure copper • Adjustable, perforated shelving • Easy to clean, coved corners with convenient access port • Reversible exterior door for added flexibility Better solutions for optimal cell growth Revolutionary THRIVE™ active airflow technology delivers homogeneous growth conditions fast, avoiding unwanted sample variation. Complete contamination control Proven protection from every direction including ISO class 5 HEPA filtered air, on demand high temperature sterilisation, and easy to maintain copper. Enhanced simplicity Designed to focus on convenience, allowing you to spend more time on your research and less time managing your incubator. • Easy to maintain 100% solid copper option • On demand data and error logs • Condensation free humidification system Cat No. Description 15321085 Incubators, CO2 Thermo Scientific™ Forma™, Steri-Cycle™ i160 • Dishes for aseptic production The melting temperature of the raw material used during their manufacture is approximately 250°C. This is considered to be sufficient to destroy bacteria. The dishes are packed under very strict aseptic conditions Cat No. Type Diameter, mm Height, mm Pack qty 12694785 Triple vent 90 14,2 600 12644785 No vent 90 16,2 600 12654785 Single vent 90 16,2 600 12664785 Triple vent 90 16,2 600 INOCULATING SPREADERS, BACTERIAL, CELL • Packed in tamper evident zipper bags • Material: Polystyrene • Sterile: Yes • Colour: White • Disposable: Yes • Shape: L-shape • Length: 148mm • Certifications: EC N°1935/2004, ISO 11137 • For Use With Application: For dairy, environmental, industrial, microbiological uses Cat No. Description Pack qty 11836191 Inoculating spreaders, bacterial, cell INOCULATING SPREADERS, BACTERIAL, CELL LOOPS, INOCULATING • Packed in tamper evident zipper bags • Material: Polystyrene • Sterile: Yes • Disposable: Yes • Length: 148mm • Certifications: EC N°1935/2004, ISO 11137 • For Use With Application: For dairy, environmental, industrial, microbiological uses • Highly ergonomic • Sterile 10-3 • Traceability on each bag of 20 quantity in zipped bag • Packaged in tamper evident zip bag • Flexible polystyrene • Unique mixed extremity (1/10uL) reduces inventory complexity • Material: Polystyrene Capacity, µL Length, mm Pack qty 11733124 Green 1 192 3000 11763124 10 194 3000 Cat No. 36 Colour Blue 400 Cat No. Shape Colour Pack qty 11774166 T-shape Green 500 www.eu.fishersci.com SWABS, BIOLOGICAL SAFETY CABINETS, MICROTUBES Cat No. Capacity, mL MICROCENTRIFUGE TUBES WITH LOCKING SNAP CAP MICROTUBES SNAPLOCK MAXYCLEAR • Convenient, pierceable locking lids snap into place with onehanded operation • Polypropylene (PP) • Graduated • Flat and pierceable cap • Locking lid to secure the sample and avoid undesired opening • Marking area • Autoclavable and can withstand temperatures to -86°C • DNase/RNase and pyrogen free • Easy one-hand use • RCF, xg max: 2000 • Capacity, mL: 1,5 • Closes with a ‘snap’ and stays closed during centrifugation • Frosted cap surface for labeling • Frosted panel on the side for writing • 0,28mm piercing port in the centre of the cap allows easy access to sample by syringe needle • Autoclavable Bottom shape Max. RCF, xg Diameter, mm Length, mm Pack qty 15422545 0,5 Conical 30000 10 30 500 15432545 1,5 Conical 26000 13 39 500 15442545 2,0 Round 25000 13 40 500 Cat No. Description Colour Pack qty 11361904 Snaplock Microtubes Assorted 500 11351904 Snaplock Microtubes Natural 500 Snaplock Microtubes Pre-Sterilised Natural 250 11326144 SAFETY CABINETS, CLASS II BIOLOGICAL, SAFE 2020 • Superior personnel and product protection with best-in-class air flow and filter technology • Exceptionally comfortable ergonomic design prevents user fatigue and promotes safe working habits • Maximised energy efficiency for environmental protection and significant cost savings • Superior d.c. technology uses energy efficiently, emits less heat • Smart Flow™ digital technology maintains consistent airflow during normal filter loading or temporary airflow obstruction • Supply/exhaust air filter: H14 HEPA EN 1822, 99,995% at the most penetrating particle size (MPPS) • Sash opening: 200mm working height; can be fully opened to 773mm for thorough cleaning • Optional crossbeam UV irradiation in both side walls illuminates entire working area - ensures thorough disinfection for maximum sample protection • Quiet: noise levels 56 or 58dBA, depending on model • Safety and protection • Pressure sensor monitoring ensures safe airflow across the entire work surface Cat No. Dimensions, mm 10284804 800 x 1000 x 1586 10462614 800 x 1300 x 1586 10294804 800 x 1600 x 1586 10422784 800 x 1900 x 1586 Simpler Safer Discover our new filtration solutions for the protection of laboratory personnel, designed to be Simpler Safer Halo Smart Laboratory air filtration system Captair Smart Captair Smart Ductless filtering fume hoods Ductless filtering chemical storage cabinets SWABS, ENVIRONMENTAL Halo sense Smart Lab air quality sensor • For environmental sampling, particularly in the food and pharmaceutical industries • Available in easy to use kit format consisting of a sealed tube with neutralising buffer, capped swab and sampling template • Sterile sampling templates, 100mm x 100mm (1m2), enable accurate calculation of colony forming units per mm2 Cat No. Description Shaft Type length, mm Inner pack qty Pack qty 12802833 Square sampling kit, 902C with square sampling template 13 1 10 PS www.eu.fishersci.com Require the best of filtration quality Powerful communication interface by light Connect your units and benefit from remote control access via our mobile solutions. 37 LIFE SCIENCE APPLICATIONS EVAPORATORS, ULTRASONIC BATHS ROTARY EVAPORATORS HEI-VAP ADVANTAGE G1 Includes leading safety standards and features for superior ease of use and reduced cost of ownership, plus: • Hand lift configurations • Experience the advantages of our large digital 3.5 ‘’ LCD display which indicates rotation speed, heating bath and vapor temperature • Experience the advantages of the automatic process timer which turns off your evaporator at a pre-programmed time and removes evaporating flasks from bath on motor lift models Cat No. Description 10321025 rotary evaporators HEI-VAP Advantage G1 BATHS, ULTRASONIC, ANALOGUE • State of the art microprocessor controlled ultrasonic cleaning and sweep technology • Long lifepan from cavitation resistant stainless steel tanks • LED display showing set and remaining time and pre-set and actual temperature • Ergonomically shaped plastic carrying handles • Newly developed cover reduces noise and accelerates the heating up process • Easy draining of cleaning liquid though the drain duct via a dial on the side • Operating panel arranged so that liquid cannot enter the electronics • Degas function key Cat No. Model No Volume, L Dimensions, external [w x d x h], mm Dimensions, internal [w x d x h], mm Carrying handles Power, W Mass, kg 10591203 S10H 0,8 206 x 116 x 178 190 x 85 x 60 No 90 2 10162372 S30H 2,75 300 x 179 x 214 240 x 137 x 100 Yes 280 3,3 10345822 S60H 5,75 365 x 186 x 264 300 x 151 x 150 Yes 550 5,1 10663113 S80H 9,4 568 x 179 x 264 505 x 137 x 150 Yes 750 6,4 10204762 S120H 12,75 365 x 278 x 321 300 x 240 x 200 Yes 1000 7,5 LIDS, PLASTIC BASKETS, STAINLESS STEEL Cat No. For use with Cat No. For use with 10060892 0,8L baths 11726188 0,8L baths 10560243 2,75L and 4,25L baths 10241320 2,75L and 4,25L baths 10798294 5,75L baths 11756188 5,75L baths 11846244 6,9L and 9,4L baths 11776188 6,9L and 9,4L baths 10487912 9,5L and 12,75L baths 11796188 9,5L and 12,75L baths 38 www.eu.fishersci.com MP Biomedicals Dextran Sulfate Sodium Salt for cosmetic industry Proven superior quality for: • Anti-inflammatory & anti-allergic effects • Prevention of free radical damages • Interaction with lipoproteins, enzymes & cells • Anti-wrinkle effects • Treating rough, chapped skin • Anti-ageing effects Now available at Fisher Scientific. Cat. No: 11497860 Pack Size: 100 g Cat. No: 11427880 Pack Size: 100 g www.eu.fishersci.com 39 INDUSTRIES COSMETIC CHEMICAL Austria: (0)800-20 88 40 Belgium: +32 (0)56 260 260 Denmark: +45 70 27 99 20 Germany: +49 (0)2304 9325 Ireland: +353 (0)1 885 5854 Italy: +39 02 950 59 478 Finland: +358 (0)9 8027 6280 France: +33 (0)3 88 67 14 14 Netherlands: +31 (0)20 487 70 00 Norway: +47 22 95 59 59 Portugal: +351 21 425 33 50 Spain: +34 902 239 303 Sweden: +46 31 352 32 00 Switzerland: +41 (0)56 618 41 11 UK: +44 (0)1509 555 500 11913_EN_EU © 2016 Thermo Fisher Scientific Inc. All rights reserved. Trademarks used are owned as indicated at www.fishersci.com/trademarks.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project