Palm M125 Quick start guide

Palm M125 Quick start guide
Getting Started with
Palm™ m100 Series
Handhelds
Copyright
Copyright © 2001 Palm, Inc. All rights reserved. Graffiti, HotSync, and
Palm OS are registered trademarks, and the HotSync logo, Palm, and the Palm
logo are trademarks of Palm, Inc. or its subsidiaries. Other product and brand
names may be trademarks or registered trademarks of their respective
owners.
Disclaimer and Limitation of Liability
Palm, Inc. assumes no responsibility for any damage or loss resulting from the
use of this guide.
Palm, Inc. assumes no responsibility for any loss or claims by third parties
which may arise through the use of this software. Palm, Inc. assumes no
responsibility for any damage or loss caused by deletion of data as a result of
malfunction, dead battery, or repairs. Be sure to make backup copies of all
important data on other media to protect against data loss.
IMPORTANT Please read the End User Software License Agreement with this
product before using the accompanying software program(s). Using any part of
the software indicates that you accept the terms of the End User Software License
Agreement.
Software Download Available
Palm™ Desktop software is supplied on a CD-ROM disc. If you do not have
access to a CD-ROM drive for your computer, you can download Palm
Desktop software from http://www.palm.com.
Agency Compliance Information
Product regulatory and compliance information can be found in the
Handbook file located on the product CD-ROM.
PN: 406-3452A-US
AN: 423-3452A-US
Contents
Front panel of Palm™ m100 series handhelds . . . . . . . . . . . . . . . . 1
Back panel of Palm m100 series handhelds . . . . . . . . . . . . . . . . . . . 1
Graffiti® writing area and surrounding icons . . . . . . . . . . . . . . . . . 2
Graffiti writing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic Graffiti characters (there are many more). . . . . . . . . . . . . 3
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Applications on your handheld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Expansion card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Beaming information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Battery power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Removing and reattaching the flip cover . . . . . . . . . . . . . . . . . . . . 12
Changing the faceplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Palm™ Desktop software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
I don’t see anything on my handheld screen . . . . . . . . . . . . . . 16
I can’t complete a HotSync operation . . . . . . . . . . . . . . . . . . . . 17
Troubleshooting communication problems . . . . . . . . . . . . . . . 17
Troubleshooting data synchronization problems . . . . . . . . . . 19
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
iii
Contents
iv
Front panel of Palm™ m100 series handhelds
Power button
Press it to turn on your
handheld. Hold it down for two
seconds to turn on the
backlight. Press it again to
turn it off.
Graffiti® writing
area
See the next page
for details. Graffiti
writing is a
simple method of
writing letters,
numbers, and
symbols.
Date Book
Address Book
Note Pad
Application buttons
Press each one to turn on the
handheld and start an application.
To Do List
Scroll buttons
Press to scroll
through screens,
go from day to
day in Date Book.
When your
handheld is off,
press the Up
button to display
the Clock.
Back panel of Palm m100 series handhelds
Stylus
The tool for
everything you do
on the handheld.
Use it to write
Graffiti characters,
tap icons and
buttons and menu
items, select text,
drag the scroll bar,
and so on.
Universal connector
Your handheld’s
connection to the
HotSync® cradle/
cable, and also to a
modem, portable
keyboard, and other
accessories that are
sold separately.
Faceplate tab
See page 12 to
learn how to
change the
faceplate.
IR port
Beam data from
your handheld to
another Palm OS®
handheld. See
page 11 for
details.
Expansion card
slot
Increase the
space available
for data and
applications. See
page 10 for
details.
1
Graffiti® writing area and surrounding icons
Graffiti® writing area and surrounding icons
Tap Clock to see the time, set an
alarm, change the time and date.
Tap to open the
Applications
Launcher. All your
applications are
listed there.
Tap to see menus
in applications
that have them.
When writing Graffiti
characters, write letters
on the left, numbers on
the right.
Tap to open the
Calculator.
Tap abc and 123 to
display onscreen
keyboards. Then tap
characters to enter text.
Tap here to display
alphabetic keyboard.
Tap to find text in
all applications.
Tap here to display
numeric keyboard.
Tap here to display
international keyboard.
2
Tap Contrast to improve
screen contrast using slider.
Graffiti writing
Graffiti writing
The best way to learn is to practice. To take the Graffiti tutorial on your
handheld, tap the Graffiti icon in the Applications Launcher.
Most Graffiti characters are
made with a single stroke of
the stylus.
2. Don’t lift the stylus until
you reach the end of the
stroke.
1. Start the stroke where
the heavy dot is. Don’t try
to make the dot; just start
there.
Some characters require a
preliminary stroke. For
example, to write a
quotation mark, tap once
and then make the Graffiti
stroke for n.
Basic Graffiti characters (there are many more)
Tips
■
Characters do not show up in the Graffiti writing area, but on the
handheld screen, wherever the blinking cursor is located in the
record you’re working on.
■
Write Graffiti characters BIG, and write at normal speed.
■
Press firmly with the stylus.
■
You can see tables displaying all Graffiti characters simply by
drawing the pen stroke: starting from the bottom center of the
Graffiti writing area, drag the stylus to draw a straight, imaginary
line to the top of the screen.
3
Applications on your handheld
Applications on your handheld
In the Applications Launcher, the
category All shows you all the
applications on your handheld.
Tap All to select another category
from the pick list that drops down.
Select Edit Categories to create a
new category.
Use the stylus to drag the dark bar
of the scroll bar so that you can
see the rest of the icons on the
screen. Or press the Down scroll
button.
Tips
■
To start an application, tap its icon.
■
Tap the Welcome icon in the Applications Launcher to go through
the Basic Skills and Graffiti tutorials.
■
Complete descriptions of the applications are in the electronic
Handbook.
■
For help on a task, tap the Tips icon
on your handheld.
Address Book. Keep names, addresses, phone numbers, and
other information about your personal and business contacts.
Enter a last name on the Look Up line to jump to that name.
4
Applications on your handheld
Calculator. Perform addition, subtraction, multiplication,
division, and square root operations. In the Options menu, tap
Recent Calculations to see the calculations you made in the
current session.
Card Info. Name expansion cards, format them, and review
general information about a card and its contents.
Clock. View the current time and date. Set a wake-up alarm here.
In the Options menu, tap Alarm Preferences to select Reveille,
Bumble Bee, or another sound.
5
Applications on your handheld
Date Book. Schedule appointments or any activity associated
with a time and date. A diamond marks an untimed event. Tap
icons in the lower-left corner to see events in the Day, Week,
Month, or Agenda view.
p
Graffiti. Tap to start the Graffiti tutorial.
HotSync. HotSync operations exchange and update data
between your handheld and your computer. You can perform
HotSync operations using a cradle or cable, modems attached to
your handheld and desktop computer, and the IR ports on your
handheld and computer. When synchronization is complete, the
following screen appears:
6
Applications on your handheld
Memo Pad. Store notes, directions, passwords, and other
information you can’t always remember. Each memo can be up
to 4,000 characters long. In the Options menu, tap Font to make
text bold or large.
Note Pad. Work right on the screen to make notes in your own
handwriting, draw maps, sketch, and so on.
7
Applications on your handheld
Prefs (Preferences). Customize the way your handheld looks and
operates. Tap the pick list in the upper-right corner to go to the
various preferences screens.
Security. Set a password here and select whether to mask your
private records or hide them completely. Use the same
password to lock your handheld.
8
Menus
To Do List. Create short reminders of what you have to do. Tap
Details to prioritize an item. Use Agenda View in Date Book to
see your schedule and To Do List items together.
Welcome. Come back here to recalibrate your screen or review
the Basic Skills and Graffiti tutorials.
Menus
To use menus, tap the Menu icon, or tap the upper-left corner of the
screen. The first menu drops down. Tap a menu to open it, and then
tap a command to choose it.
Tap the Menu icon (shown at left)
in the Graffiti writing area to
display the first menu.
To use common commands available in your current context, draw the
Graffiti Menu Command stroke. A toolbar appears. Tap the icon of the
command you want.
Graffiti Menu
Command
stroke
In this context, Cut,
Copy, and Paste are
available. Just tap an
icon.
9
Expansion card
Expansion card
A tiny Secure Digital (SD) or MultiMediaCard (MMC) expansion card
(sold separately) increases the variety of tasks you can do and the
amount of space available for storing software and data on your
handheld.
To insert a card:
1. Insert the card in the
2. Push the card in with your
direction shown by
the icon.
thumb. You feel the card lock
and hear the system sound.
Icon
To remove a card:
1. Push lightly against the
2. When the card is released,
card with your thumb.
you hear the system sound.
When a card is seated in the expansion
slot, its name appears in the upper-right
corner of the Applications Launcher,
and its contents appear onscreen, as
shown to the right.
When you want to go back to the applications on your handheld, tap
the name of the expansion card, and then tap All in the pick list.
10
Beaming information
Use the Card Info application to see general information about the
expansion card, rename it, and format it.
Keep the expansion card slot clean. Leave the dummy card in the slot
when you are not using an expansion card.
Beaming information
The IR (infrared) port on your handheld can beam information to
another Palm OS® handheld that’s close by and also has an IR port.
You can beam the following information:
■
The record or category of records currently displayed in Address
Book, Date Book, Memo Pad, Note Pad, or To Do List.
■
An application in RAM memory or on an expansion card.
■
An Address Book record designated as your business card. To
designate the record, simply select the record, tap the Menu icon,
tap Select Business Card, and then tap Yes to confirm. To beam
your business card, hold down the Address Book button for two
seconds.
For best results, handhelds should be between 10 centimeters (about 4
inches) and 1 meter (about 39 inches) apart, and the path between the
two handhelds must be clear of obstacles.
To beam:
To receive beamed information:
1. Display what you want to
1. Turn on your handheld.
beam onscreen.
2. Tap the Menu icon.
3. In the menu that drops down,
tap the Beam command.
2. (Optional) Tap the category
pick list and select where you
want the information to be
stored on your handheld.
Before you move your handhelds out of beaming position, wait for
the Beam Status dialog box to indicate that the transfer is complete.
11
Battery power
Battery power
Use two AAA batteries. To conserve battery life, minimize the use of
the backlight, and go to General preferences to shorten the idle time
before your handheld turns itself off.
If the batteries are so weak that your handheld does not operate, your
data is safe for about two weeks. Enough energy may remain to
preserve data, but not enough let you turn on your handheld. If your
handheld does not turn on when you press the power button, insert
new batteries immediately.
Removing and reattaching the flip cover
To remove the cover:
1. Grasp the hinge with your thumb.
2. Gently rock the cover from one side
to the other until the hinge prongs
release from the handheld.
Changing the faceplate
To remove the faceplate:
1. Remove the flip cover.
2. Lift the faceplate tab slightly to
separate it from the handheld; then
pull the faceplate away from the
handheld.
12
Palm™ Desktop software
To attach the faceplate:
2
1. Align the bottom edge of the new
faceplate with the slot on the
bottom edge of the handheld.
2. Gently press the top of the
faceplate onto the handheld until it
clicks into position.
1
Palm™ Desktop software
13
Palm™ Desktop software
Here are four important reasons why you should use Palm™ Desktop
software:
Synchronize to keep your data safe. Develop
the habit of performing
frequent HotSync operations between your handheld and Palm
Desktop software. Then, should anything happen to your handheld,
you have a copy of your data in Palm Desktop software.
Enter data in an application on your computer. Then perform a HotSync
operation. The data shows up in the corresponding application on
your handheld, and data from the handheld shows up in the
appropriate application in Palm Desktop software.
Download Palm applications from the web
to the Palm\Add-on folder
on your computer. Then:
Windows. Click
the Install Tool icon.
Macintosh. From the HotSync menu, choose Install Handheld Files.
On either platform, add the application to the Install Tool list and
indicate whether the application is to be loaded on your handheld
or an expansion card. Then perform a HotSync operation. The
application is loaded onto your handheld or expansion card.
Consult the electronic Handbook. Adobe Acrobat Reader opens the
comprehensive documentation for your handheld. (If you do not have
Acrobat Reader, install it from the CD labeled Palm Desktop
software.) To open the Handbook, do one of the following:
From the Help menu of Palm Desktop software, choose
Handbook.
Windows.
Macintosh. Open the Palm folder, and then open the
Documentation folder. Double-click the file Handbook.pdf.
The Handbook table of contents is located in the pane on the left side
of Acrobat Reader. To jump to a section of the book, click the
section in the table of contents. You can also click Index to find
what you’re looking for; then click the index entry to jump to the
page.
14
Troubleshooting
System requirements
To install and operate Palm Desktop software, your computer system
must meet the following requirements:
Minimum requirements: Windows
■
IBM-compatible Pentium-class computer
■
Windows 98/Me/2000 (Windows 95/NT operating systems
require a serial cradle/cable, sold separately)
■
16 MB RAM (64 MB recommended with Windows 2000)
■
30 MB available hard disk space
■
VGA monitor or better (the Quick Tour requires 256-color video
display; for best results, use High Color:16 bit)
■
CD-ROM drive (you can also download the Palm Desktop
software from http://www.palm.com)
■
Mouse
■
One USB port or available serial port (serial cradle/cable sold
separately)
Minimum requirements: Macintosh
■
Apple Macintosh or compatible with a Power PC processor
■
Mac OS 8.5.1 to 9
■
One USB port or available serial port (serial cradle/cable and
adapters sold separately)
■
25 MB available hard disk space
■
6 MB free RAM
Troubleshooting
If you encounter a problem, try the following:
■
The suggestions included in this section.
■
The suggestions in the “Frequently Asked Questions” appendix of
the electronic Handbook, accessible from Palm Desktop software.
■
The Support pages on the Palm web site: http://www.palm.com
15
Troubleshooting
If your problem persists, contact Technical Support. For US and
International telephone numbers, go to the Palm web site:
http://www.palm.com.
Third-party applications. There are thousands of third-party
applications available for Palm OS handhelds. For questions and
support, please contact the software developer directly.
I don’t see anything on my handheld screen
1. Press an application button to ensure your handheld is turned on.
2. Tap the Contrast icon
in the upper-right corner of the Graffiti
writing area. If the Contrast dialog box appears, adjust the contrast
by holding down the Up scroll button for a few seconds. If this
doesn’t work, hold the Down scroll button for a few seconds.
3. Make sure the batteries are fresh and properly installed.
4. Perform a soft reset. Use a
paperclip to gently press the
reset button on the back of your
handheld.
Reset
button
5. If your handheld still doesn’t
turn on, perform a hard reset by
holding down the power button
while doing a soft reset. Wait for
the Palm™ logo to appear, and
then release the power button. If
you want to continue and erase
all your data, press the Up scroll
button.
IMPORTANT With a hard reset, all records and entries stored in your
handheld are erased. Never perform a hard reset unless a soft reset does
not solve your problem. You can restore any data previously
synchronized with your computer during the next HotSync operation.
See the electronic Handbook for instructions on restoring your data.
16
Troubleshooting
I can’t complete a HotSync operation
The first step in diagnosing HotSync problems is to determine if your
handheld and computer are able to communicate with each other.
1. Connect your handheld to the HotSync cradle/cable.
2. Confirm that HotSync Manager is running and enabled.
On the Windows desktop, double-click the Palm
Desktop icon, click the HotSync icon
™ on the taskbar and make
sure Local (USB or Serial, depending on the kind of connection you
use) is checked on the menu. If not, click it to insert a check mark.
Windows.
Macintosh. Double-click the HotSync Manager icon in the Palm
folder. Click the HotSync Controls tab and make sure the Enabled
option is selected.
3. Press the HotSync button
on the cradle/cable.
4. Watch your monitor to see if the HotSync Progress dialog box
appears (you may also hear the HotSync tones on your handheld).
If the HotSync Progress dialog box does not appear, your handheld
and computer are not communicating. See “Troubleshooting
communication problems” later in this chapter.
If the HotSync Progress dialog box appears, your handheld and
computer are communicating. See “Troubleshooting data
synchronization problems” later in this chapter.
Troubleshooting communication problems
Check your connections:
1. Check the contact points on your handheld and on the HotSync
cradle/cable and make sure they are clean and free from
obstruction.
2. Make sure that your handheld is seated firmly on the HotSync
cradle/cable.
3. Check the HotSync cradle/cable connection on the back of your
computer to make sure it is properly attached.
4. Press the HotSync button on the cradle/cable to perform a
HotSync operation.
If your problem persists, check your handheld settings.
17
Troubleshooting
Check your handheld settings:
1. Turn on your handheld and tap the Applications icon
2. Tap the HotSync icon
.
.
3. Tap Local above the HotSync icon and select Cradle/Cable from
the pick list below the HotSync icon.
4. Tap the HotSync icon to perform a HotSync operation.
If your problem persists, check your computer settings.
Check your Windows computer settings:
1. Right-click the My Computer icon on your Desktop and choose
Properties.
2. Click the Hardware tab, and then click Device Manager.
3. Click the plus sign (+) next to Ports.
If the port you are using for the HotSync cradle/cable shows an
exclamation point, you have a hardware conflict. To resolve this,
consult the documentation that came with your computer.
4. Click the HotSync icon
on the taskbar and choose Setup.
5. Click the Local tab and make sure the Serial port setting matches
the port where you connected the HotSync cradle/cable.
6. From the Speed list, choose the 9600 setting.
7. Click OK and perform a HotSync operation. If you are still
experiencing problems, complete steps 8 and 9.
8. Click the HotSync icon on the taskbar and choose Exit.
9. Restart HotSync Manager by selecting Start, Programs, Palm
Desktop, and then HotSync Manager.
NOTE If you get a warning that the port is in use, then either move your
HotSync cradle/cable to a different COM (serial) port or disable the
conflicting device to perform HotSync operations.
18
Troubleshooting
Check your Macintosh settings:
1. Double-click the HotSync Manager in the Palm folder.
2. Click the Serial Port Settings tab.
3. Make sure Local is selected and that the port selection matches the
port where your HotSync cradle/cable is attached.
NOTE If you get a warning that the port is in use, then either move your
HotSync cradle/cable to a different port or disable the conflicting device
to perform HotSync operations.
Troubleshooting data synchronization problems
If your data does not appear on your handheld and in the Palm
Desktop software after a HotSync operation, try the steps in this
section.
NOTE If you are attempting to synchronize with applications other than
the Palm Desktop software (for example, Microsoft Outlook or Lotus
Notes) using a third-party conduit, please consult the documentation that
was provided with that conduit.
Check your desktop configuration:
1. Make sure you selected the user name that matches your handheld.
2. Make sure the date on your computer matches the date on your
handheld.
Check the HotSync log:
1. Open the HotSync log.
Click the HotSync icon on the taskbar and select View
Log from the menu.
Windows.
Macintosh. Double-click the HotSync Manager in the Palm folder
and choose View Log from the HotSync menu.
2. Ensure that all applications are marked OK. If not, continue to the
next section to check your conduit settings.
19
Troubleshooting
Check your conduit settings on a Windows computer:
1. Click the HotSync icon on the taskbar and select Custom.
2. Select the user name that matches the handheld you are attempting
to synchronize.
3. Ensure that the application conduits (other than Backup and
Install) are set to Synchronize the Files.
Check your conduit settings on a Macintosh:
1. Double-click the HotSync icon in the Palm folder.
2. From the HotSync Manager menu, choose Conduit Settings.
3. Select the user name that matches the handheld you are attempting
to synchronize.
4. Ensure that the application conduits (other than Backup and
Install) are set to Synchronize the Files.
20
Index
A
B
AAA batteries 12
Accessories, attaching 1
Address Book 4
Adobe Acrobat Reader for
electronic Handbook 14
Agenda view
in Date Book 6
showing To Do List items 9
Alphabet
Graffiti writing 3
onscreen keyboard 2
Applications
Address Book 4
beaming 11
buttons 1
Calculator 5
Card Info 5
Clock 5
Date Book 6
expansion card 10
Graffiti tutorial 6
HotSync 6
installing 14
Memo Pad 7
Note Pad 7
Prefs (Preferences) 8
Security 8
starting 1, 4
third-party 16
To Do List 9
Welcome 9
Applications Launcher 2, 4, 10
Appointments in Date Book 6
Attaching
peripheral hardware 1
Backing up your data 6, 14
Backlight 1, 12
Basic Skills tutorial 4, 9
Batteries 12, 16
Beaming information 1, 11
Bold text 7
Business card, creating on
handheld 11
C
Calculator 2, 5
Card Info for expansion cards 5, 11
Categories
application 4
beaming 11
creating 4
expansion card 10
Clock 5
alarm 2
alarm sounds 5
time and date 2
turning on with Up scroll
button 1
viewing the time 1, 2
Command stroke 9
Commands
accessing 2
menus for 9
toolbar of common 9
Connecting handheld 1
Contrast
improving screen visibility 2
troubleshooting screen
problems 16
Cover for handheld 12
Customizing handheld 8
21
Index
D
H
Data. See Entering text
Date Book 6
Date, setting and viewing 5
Day view in Date Book 6
Diamond mark for untimed
event 6
Documentation for handheld 4, 6,
14
Downloading applications from
the web 14
Drawing in Note Pad 7
Handbook 4, 14
Handheld
attaching accessories to 1
cover for 12
faceplate for 12
increasing space on 10
locking 8
recalibrating screen 9
resetting 16
screen problems 16
Handwritten notes 7
Hard reset 16
Hiding private records 8
HotSync
connection 1
for installing applications 14
local operation on
Macintosh 17
restoring data after hard
reset 16
transferring data from
computer to handheld 6, 14
troubleshooting
problems 17–20
E
Entering text
fonts 7
Graffiti tutorial 3, 4
help with Graffiti writing 3
on computer 14
on handheld 2
Expansion card 10
formatting 5
installing applications on 14
naming 5
slot 1
F
Faceplate 1, 12
Finding an address 4
Finding text on handheld 2
Flip cover for handheld 12
Font, changing 7
Frequently asked questions 15
G
Graffiti writing
help for 3
Menu Command stroke 9
stylus used for 1
table of main characters 3
tutorial 3, 6, 9
where to write 1, 2
writing characters 3
22
I
Installing
applications 14
third-party applications 16
International characters, onscreen
keyboard 2
IR port for beaming 1, 11
K
Keyboards
external 1
on handheld 2
L
Large text 7
Locking handheld 8
Looking up an address 4
Index
M
S
Macintosh 14, 17, 19, 20
Masking private records 8
Memo Pad 7
Menus 2, 9
Modem 1
Month view in Date Book 6
Scheduling with Date Book 6
Screen
contrast 2
problems with 16
recalibrating 9
Scroll bar 1, 4
Scroll buttons 1
Security 8
Soft reset 16
Starting applications 1, 4
Stylus 1
to display Graffiti Help 3
using to scroll 4
Synchronization 6, 14
See also HotSync
N
Note Pad 7
Notes
Memo Pad 7
Note Pad 7
Numbers
onscreen keyboard 2
P
Palm Desktop software 14
Password 8
Pen stroke 3
Peripheral hardware, attaching 1
Pick lists 4, 8
Power from batteries 12
Preferences 8
Prioritizing tasks 9
Private records 8
Punctuation, Graffiti writing 3
R
Recalibrating handheld screen 9
Records
beaming 11
entering text 3
private 8
Reminders 9
Removing
cover 12
faceplate 12
Resetting handheld
hard reset 16
soft reset 16
Returning to handheld
applications from expansion
card 10
T
Tapping to work with handheld
features 1
Technical Support 16
Third-party applications on
handheld 16
Time, setting and viewing 1, 5
Tips for help on handheld 4
To Do List 9
Toolbar of common commands 9
Troubleshooting 15–20
Turning off handheld 1, 12
Turning on handheld 1, 16
Tutorials on the handheld 4, 9
U
Universal connector 1
Untimed events in Date Book 6
W
Weak batteries 12
Web site 15
Week view in Date Book 6
Welcome 9
Windows 14, 17, 19, 20
Writing on handheld 1, 2, 3
23
Index
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement