Palsonic 81CM User's Manual

Palsonic 81CM User's Manual
OWNER'S MANUAL
81CM CORDLESS REMOTE LCD TELEVISION & MONITOR
MODEL: TFTV810
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Table of Contents
Important Safety Precautions ....................................................................................................................
Preparations ..............................................................................................................................................
Using the Remote Control ..................................................................................................................
Batteries for the Remote Control ........................................................................................................
Antenna Connection ...........................................................................................................................
Power Connection ...............................................................................................................................
Removing or Installing the Back Cover ...............................................................................................
Identification of Controls ............................................................................................................................
Main Unit .............................................................................................................................................
Remote Control ...................................................................................................................................
Connections ...............................................................................................................................................
Cautions before Connecting ...............................................................................................................
Connect a VCR ...................................................................................................................................
Connect a AV or S-Video Inputs ........................................................................................................
Connect a DVD Player or Home Cinema System ...............................................................................
Connect a DTV Receiver ....................................................................................................................
Connect a PC .....................................................................................................................................
Turning the Unit On and Off ......................................................................................................................
Turning the Unit On or Off....................................................................................................................
Viewing the Menus and Displays ........................................................................................................
Viewing TV Programs ................................................................................................................................
Select a Region ...................................................................................................................................
Storing Channels in Memory Automatically ........................................................................................
Manual Fine Tuning ............................................................................................................................
Manual Search ....................................................................................................................................
Skipping Channel ................................................................................................................................
Editing Channels .................................................................................................................................
Setting Favourite Channel ..................................................................................................................
Editing Program Name ........................................................................................................................
Locking TV Channels ................................................................................................................................
Setting Locking Function On or Off .....................................................................................................
Locking or Unlocking TV Channels .....................................................................................................
Changing Password ............................................................................................................................
Basic Operations .......................................................................................................................................
Changing Channels ............................................................................................................................
Adjusting the Volume ..........................................................................................................................
Muting the Sound ................................................................................................................................
Select Input Source Signal ..................................................................................................................
Setting Picture ...........................................................................................................................................
Using the Preset Picture Mode ...........................................................................................................
Customising the Picture ......................................................................................................................
Reducing Picture Noise ......................................................................................................................
Freezing Picture ..................................................................................................................................
1
3
3
3
4
4
4
5
5
7
9
9
9
10
11
12
12
13
13
13
14
14
14
14
15
15
15
16
16
17
17
17
17
18
18
18
18
18
19
19
19
19
19
Table of Contents (continued)
Setting Sound ............................................................................................................................................
Adjusting the Volume ..........................................................................................................................
Adjusting the Sound Balance ..............................................................................................................
Adjusting the Headphone Volume .......................................................................................................
Adjusting Equaliser .............................................................................................................................
Stereo/Bilingual Selection ...................................................................................................................
Setting System ...........................................................................................................................................
Setting Colour System .........................................................................................................................
Setting Sound System .........................................................................................................................
Changing Screen Aspect Ratio ...........................................................................................................
Setting Menu Language ......................................................................................................................
Setting WSS ........................................................................................................................................
Setting Blue Screen .............................................................................................................................
Setting Sleep Timer .............................................................................................................................
Setting Current Time/Turn Off Timer/Turn On Timer ..........................................................................
Changing Screen Layout ...........................................................................................................................
Selecting Screen Layout .....................................................................................................................
PIP Operations ..........................................................................................................................................
Viewing the Picture-in-Picture .............................................................................................................
Using PIP-POS button ........................................................................................................................
Using Active-WIN Button .....................................................................................................................
Swap the Contents of the PIP Image and Main Image .......................................................................
Adjustment in D-Sub/DVI Mode .................................................................................................................
Adjusting Image Horizontal Size .........................................................................................................
Changing the Position of Image ..........................................................................................................
Fine Tune ............................................................................................................................................
Adjusting the Screen Automatically .....................................................................................................
Smoothing the Picture .........................................................................................................................
Loading Default Values .......................................................................................................................
Advanced Adjustment for Image Position ...........................................................................................
Teletext ......................................................................................................................................................
What is Teletext ...................................................................................................................................
Turning On and Off Teletext ................................................................................................................
Button Functions .................................................................................................................................
Troubleshooting .........................................................................................................................................
Specifications .............................................................................................................................................
20
20
20
20
20
21
22
22
22
22
22
23
23
23
23
24
24
25
25
25
25
25
26
26
26
26
26
27
27
27
28
28
28
28
29
30
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the product. To
ensure your safety and prolong the service life of your LCD TV product, please read the following precautions carefully
before using the product.
1. Read these instructions --- All operating instructions must be read and understood before the product is operated.
2. Keep these instructions ---These safety and operating instructions must be kept in a safe place for future reference.
3. Head all warnings --- All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions --- All operating instructions must be followed.
5. Attachments --- Only use attachments/accessories specified by the manufacturer. Do not use attachments not
recommended by the manufacturer. Use of improper attachments can result in accidents,
6. Power source --- This product is intended to be supplied by a listed power supply indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For
added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the cable system.
7. Power cord protection --- Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Overloading --- Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
9. Entering of objects and liquids --- Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason,
do not spill water or liquid on the product.
10. Servicing --- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
11. Damage requiring service --- If any of the following conditions occurs, unplug the power cord from the AC outlet,
and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in anyway.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable
abnormality in the product indicates that the product needs servicing.
12. Replacement parts --- In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger.
13. Safety checks --- Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting --- When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer. This is a safety feature.
1
Important Safety Precautions (continued)
15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. Do not place the product on an unstable
trolley, stand, tripod or table. Placing the product on an unstable base can cause
the product to fall, resulting in serious personal injuries as well as damage to the
product. When mounting the product on a wall, be sure to follow the manufacturer's
instructions. Use only the mounting hardware recommended by the manufacturer.
16. Careful move --- When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven
floor surfaces can cause the product to fall from the trolley.
17. Lightning --- Unplug this apparatus during lightning storms or when unused for
long periods of time.
For added protection for this television equipment during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage to the equipment due to
lightning and power-line surges.
18. Do not use this apparatus near water --- for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature to high temperature
environment, as this causes condensation, which may result in fire, electric shock, or
other hazards.
19. Clean only with dry cloth --- Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
20. Ventilation --- Do not block any ventilation openings. Install in accordance with
the manufacturer instructions. The vents and other openings in the cabinet are
designed for ventilation. Do not cover or block these vents and openings since
insufficient ventilation can cause overheating and/or shorten the life of the product.
Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in installation;
do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer's instructions are followed.
21. Heat sources --- Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.
22. Panel protection --- The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or impacted upon by other
objects. Be careful not to be injured by broken glass pieces in case the LCD panel
breaks.
23. Pixel defect --- The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally,
a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not
affect the performance of your product.
2
Preparations
Using the Remote Control
Use the remote control by pointing it towards the remote sensor window of the set.
Objects between the remote control and sensor window may prevent proper operation.
Note: the illustration is for your reference only, the remote sensor may locate differently
with different model.
Cautions regarding use of remote control
Do not expose the remote control to shock. In addition, do not expose the remote
control to liquids, and do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or
strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer
to the remote sensor window.
Batteries for the Remote Control
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
1 Open the battery cover.
2 Insert two size-AAA batteries.
3 Replace the cover and slide in
reverse until the lock snaps.
(Slide the cover while pressing
down.)
(Place the batteries with their terminals
corresponding to the (+) and (-)
indications in the battery compartment.)
Precautions on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Place batteries with their terminals corresponding to the (+) and (-) indications.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe with a cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
If the remote control is not used for an extended period of time, remove the batteries from the remote control.
3
Preparations (continued)
Antenna Connection
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the
picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
The exact type and position of the aerial will depend upon your particular area.
Note:
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur
due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
Power Connection
AC-INPUT
Plug into AC outlet
Household
power outlet
AC cord
bottom view
1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.
Note:
This product should be operated only from the type of power source indicated on the marking label.
Always unplug the AC cord from power outlet when not using for a long period of time.
This illustration is for reference only. The AC plug may be different on different models.
Removing or installing the Back Cover
Press the PUSH button
Press the PUSH button
Pull out the Cover carefully
Pull out the Cover carefully
Cover Insertion
Remove the Cover
Insertion
Cover
When you finish connecting, aim the Insertion toward
the Locating groove, then carefully push the Cover until
the Cover locks in place with a click.
4
Identification of Controls
Main Unit
Power Indicator
CH+
CHVOL+
A yellow indicator lights when the power is on and
a red indicator lights when in the standby mode.
VOLMENU
SOURCE
Remote Sensor
Channel Up/Down
Volume Up/Down
Menu
Select Input Signal
Power On/Standby
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
2. SOURCE
To access signal source select menu
In OSD Menu, press this button to confirm your setting or operation
3. MENU
Press this button to access the Menu main page
4. VOL+/Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;
In OSD Menu, press these buttons to adjust the value or setting of each item
5. CH+/Press these two buttons to directly change the TV channel;
In OSD Menu, press these buttons to choose the OSD items
Note:
Functions of VOL+/-, CH+/-, MENU, SOURCE and POWER
are also provided to the remote control.
This operation manual provides a description based on operating functions with the remote control.
OSD means On Screen Display.
5
Identification of Controls (continued)
Main Unit
ANTENNA INPUT
HEADPHONE JACK
S-VIDEO
AV INPUT/
S-VIDEO IN
AUDIO R
AUDIO L/MONO
VIDEO
SCART1 INTERFACE
SCART2 INTERFACE
D-Sub
D-Sub IN
AUDIO
DVI-D
DVI IN
AUDIO
Y
Cb/Pb
Cr/Pr
COMPONENT IN
AUDIO R
AUDIO L/MONO
1. Antenna input
Allows you to connect cable or outdoor antenna
2. Headphone jack
3. AV inputs (Video, Audio L/Mono, R) / S-Video input
Receive video/audio signals from external sources such as VCR or DVD player.
Receive a S-Video signal from external source such as VCR or DVD player.
4. 21-pin Euro-SCART 1 (VIDEO/RGB) interface
Connect to the external source such as a Decoder, VCR, or DVD player.
5. 21-pin Euro-SCART2 (VIDEO/S-VIDEO) interface
6. D-Sub input / Audio in
Connect to the D-Sub/audio output jacks on your PC.
7. DVI input / Audio in
Receives the digital video / audio signals from a set top box or PC.
8. Component Video inputs (Y, Pb/Cb, Pr/Cr, Audio L/MONO, R)
Connect to the component and audio output jacks of a DVD player or Set-Top Box.
6
Identification of Controls (continued)
Remote Control
1. POWER
Turn the unit on or standby.
2. CH
CH
, VOL+/- Use to switch channels;
- To display previous/next page (Teletext)
VOL+/- - Use to adjust volume;
In MENU operation, use CH
to select menu item and VOL+/to adjust selected item.
3. MENU
To access the MENU main page.
In Menu operation, press this button to return to a higher level menu.
4. P.M
To quickly select picture mode.
Red button (Teletext)
5. SM
To quickly select sound mode.
Green button (Teletext)
6. SRS
To select SRS sound effect
7. Freeze
To freeze current picture.
8. 0~9 digit buttons, -/-- button
0~9: Direct channel select;
To in put character when editing channel label
-/-- button; one digit/2 digit/3 digit channel number selector.
9. SOURCE
To access source select menu
10. MUTE
Sound mute
11. ENTER
To confirm your operation or setting or access the submenu
12. SLP
To access Sleep timer setting menu.
Blue button (Teletext).
13. FAV
To cycle among all favourite channel.
Yellow button (Teletext).
14. RETURN
To quickly jump between current channel and last selected channel.
To switch to previous source.
15. DSP/CAPS
To display current channel status.
To switch between upper case and lower case input mode when
editing channel label.
Flip the cover, open in the
direction of the arrow.
7
Identifications of Controls (continued)
Remote Control
16. POP
To activate picture-out-picture
17. PIP
To activate picture-in-picture
18. STEREO
To select stereo, mono, bilingual
To rectify the picture automatically in D-Sub mode
19. PIP-POS
To select PIP frame position
20. TEXT
To enter/exit teletext mode (Teletext)
21. HOLD
To hold the current teletext page temporarily (Teletext)
22. UPDATE
To view update Teletext page (Teletext)
23. M.WIN
To select to view multi window mode
24. Active-WIN
To select the main picture frame or PIP frame when viewing
picture-in-picture
25. TIMER
To set current time, turn-off timer or turn-on timer
16
23
17
24
18
19
25
26
20
27
21
28
22
29
26. SWAP
In full screen of TV program, press this button to access channel
editing mode
When viewing PIP TV program, press this button to exchange the
Contents of the PIP Image and Main Image
27. MIX
To superimpose text on the TV picture (Teletext)
28. SIZE
To expand top half or bottom half page of the current screen (Teletext)
29. REVEL
To display hidden information such as solution to riddles and
puzzles (Teletext)
8
Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Connect a VCR
AV Cable
21-pin Scart
Convertor
Rear of the VCR
VCR
How to connect:
1. Insert the Scart Convertor into SCART1 or SCART 2 interface.
2. Connect the AV Cable between the Scart Convertor and the VCR.
To play VCR
1. Turn on your LCD TV, press SOURCE
button on the remote
control.
2. Press CH
to select SCART1 (or SCART 2 AV) and press
ENTER to confirm.
3. Turn on your VCR, insert a videotape and press the Play button.
9
Select Main Source
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
Connections (continued)
Connect AVI or S-Video Inputs
S-video
Audio
cable
cable
Video
cable
Yellow (VIDEO)
White (AUDIO L/MONO)
Red (AUDIO R)
Examples of external devices that can be connected
VCR
Home video
game system
Video Camera
The unit provides Audio/Video inputs for you to connect external devices such as VCR, Video Camera or
Home video game system.
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks
on the unit and external devices.
To view signal from AV/S-VIDEO inputs
1. Turn on your LCD TV, press SOURCE
button on the remote
control.
2. Press CH
to select Video or S-Video and press ENTER to
confirm.
3. Turn on the external device and play it.
Select Main Source
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
Note:
For better video, you can use the S-Video terminal if your source supports it. If you are going
to use S-Video terminal, please select S-Video instead of Video in source menu
The Video input terminal on the AV IN and the S-Video input terminal share the same Audio input terminals.
10
Connections (continued)
Connect a DVD Player
Rear of the D V D player
DVI-D IN
D-Sub IN
DVD player
HDTV IN
Video
cable
Audio
cable
white (audio L)
red (audio R, Pr/Cr)
Green (Y)
Blue (Pb/Cb)
How to connect a DVD Player or Home Cinema System using Component Video Connections:
Connect the Video cable between the Y, Cb, Cr input jacks on the unit and Cb, Cr output jacks on the DVD player.
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player.
To play DVD
1. Turn on your LCD TV, press SOURCE
button on the remote
control.
2. Press CH
to select YPbPr.
3. Press ENTER to confirm.
4. Turn on your DVD player, insert a DVD disc and press the
Play button.
Select Main Source
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
Note:
The Y, Cb, Cr outputs on your DVD player are sometimes labelled Y, Pb, Pr or Y, B-Y, R-Y.
If so, connect the cables to like colours.
11
Connections (continued)
DVI
cable
HDTV IN
Audio
cable
DVI-D IN
D-Sub IN
Connect a DTV receiver
DTV Receiver
Rear of the DTV receiver
How to connect:
Connect the cable or antenna to the antenna input jack on the DTV receiver.
Conned the DVI cable between the DVI input interface on the unit and DVI
output interface on the DTV receiver.
Connect the Audio cable between the AUDIO input jack on the unit and
AUDIO output jacks on the DTV receiver.
To Watch DTV
1. Turn on your LCD TV, press SOURCE
2. Press CH
to select DVI.
3. Press ENTER to confirm.
4. Turn on your DTV receiver.
button on the remote control
Select Main Source
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
Audio
cable
AUDIO
DVI-D IN
D-Sub
cable
D-Sub IN
Connect a PC
HDTV IN
Y
How to connect:
PC
Connect a D-Sub cable between the S-Sub interface on the PC the
D-Sub interface on the unit.
Connect an Audio cable between the AUDIO output on the PC and
AUDIO input jack on the unit.
To Watch the PC screen
I. Turn on your LCD TV, press SOURCE
button on the remote control.
2. Press CH
to select D-Sub (D-Sub).
3. Press ENTER to confirm.
4. Turn on your PC and check for PC system requirements.
5. Adjust the PC screen.
12
Select Main Source
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
Turning the Unit On and Off
Turning the Unit On and Off
Turning On
Insert the power cord into the wall outlet.
Press the Power button on the remote control.
The unit will be turned on and you will be ready to use it's features.
Turning Off
With the power on, Press the Power
turn off.
Note:
You can also use the Power
button on the remote control to
button on the Control panel on the main unit.
Viewing the Menus and Displays
Your LCD TV has a simple, easy-to-use menu system that appears on the
screen. This system makes it convenient and fast to use features on the
unit.
Video
With the power on, press the MENU button on the remote control.
The main menu appears on the screen.
2
Use the VOL+/- to select menu page. Use CH
menu page.
3
Use the CH
to select item. Use VOL+/- to adjust value or
setting of each item. Use MENU to exit menu system.
On-screen menu will disappear from the screen automatically after
some seconds, or you can press the MENU button repeatedly to exit
the menu system.
Screen
Option
Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
Viewing the Menus
1
Audio
Standard
50
50
50
00
50
Auto
to activate the
Note:
In Menu operations, you may use the SOURCE button on the unit to
confirm your operation or setting just as the ENTER button on the
remote control.
In Menu operations, you may use CH
to select item or just press
the relevant number button according to the number indicated on the
left of the menu item.
To clearly introduce the menu operations, this operation manual
provides a description based on operation with the remote control.
1
2
3
4
5
Displaying Status Information
The unit displays current status information (e.g channel number, channel
name, channel locking status, colour and sound system or stereo mode) by
pressing the DSP/CAPS button.
1. Information for main picture frame
3. Favourite channel icon
2. Current channel name
5. Current channel number
4. Locked status icon
7. Stereo mode
6. Sound system
9. Colour system
8. NICAM status
Note:
Some of the above items are not always displayed on the screen and they
are subject to your settings.
13
MP:
ABC
SECAM
FM/AM
9
8
005
D/K
Mono
7
6
Viewing TV Programs
Your LCD TV can memorise and store all of the available channels. After the available channels are memorised, use
CH
to scan through the available stations.
Select a Region
Before you start automatic search, it is necessary to select a region firstly.
Video
1
2
3
4
5
6
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
repeatedly to select Country item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select a region.
Please select a proper region according to your area.
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
TV
Auto
Off
Off
Off
English
Others
On
On
Press ENTER to confirm and press MENU repeatedly to exit.
Storing Channels in Memory Automatically
Video
1 Press MENU to display the menu main page.
2 Press VOL+/- repeatedly to display Program menu page.
3 Press CH repeatedly to select Auto Search item.
4 Press VOL+ or ENTER to store channels in memory
automatically.
The process will begin memorising all of the available channels.
Note:
The process of auto memory will be stopped if you press the
MENU button
During the process of auto Search, the unit automatically identifies
and stores the program name if the program's name is available.
If the program's name is with more than 5 characters, the unit only
stores the first 5 characters.
Audio
Screen
Program
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
Option
5
Off
Off
Off
00
AUTO
B/G
Auto Search Program...
479.25MHz
002
UHF
Manual Fine Tuning
Video
1
2 Press VOL+/- repeatedly to display Program menu page.
3 Press CH repeatedly to select Fine Tuning item.
VOL+/- to fine tune till the best possible picture and sound
4 Press
are obtained.
Audio
Screen
Program
Option
Press MENU to display the menu main page.
5
Press MENU to exit.
14
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
5
Off
Off
Off
00
AUTO
B/G
Viewing TV Programs (continued)
Manual Search
Use Manual Search if desired channels can not be memorised or if you would like to store programs to specific channel
numbers one by one.
Video
1
Use number buttons to directly select a channel that you want to
perform manual search.
2
3
4
5
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Program menu page.
Press CH
repeatedly to select Manual Search item.
YOU may press ENTER to input a frequency or press VOL+/- to
search program from current frequency.
To search program manually by inputting a frequency:
1. Press ENTER the unit allows you to input a frequency.
2. Input the desired frequency by using 0~9 buttons.
3. Press ENTER to confirm and the unit locates to your frequency.
If you want to exit, press MENU again.
Audio
Screen
Option
Program
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
5
Off
Off
Off
00
AUTO
B/G
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
AUTO
B/G
Manual Search Program...
002
To search program manually from current frequency:
479.25MHz
UHF
Pressing VOL+, the unit searches towards higher frequency;
Pressing VOL-, the unit searches towards lower frequency;
The search stops when a program is found and this program will be stored in current channel.
During process of manual search, you may control the searching direction by pressing VOL+ or VOL-.
Skipping Channel
Video
1
Use number buttons to directly select a channel that you want to
skip.
2
3
4
5
6
7
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Program menu page.
Press CH
repeatedly to select Skip item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
Audio
Screen
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
Option
Program
5
Off
On
Off
00
AUTO
B/G
to select On or Off.
Press ENTER to confirm and press MENU repeatedly to exit.
When the item is set to on, the selected channel will be skipped.
When the item is set to off, the selected channel will not be skipped.
The skipped channels can not be selected by using the CH
buttons unless you use number buttons to
input channel number directly.
Editing Channels
The edit channels function is for you to arrange channel order as you
wish.
Program No.:
Sorted No.:
When viewing single TV screen, press SWAP to display Channel Swap
menu. The current channel number appears in the [Program No.] item.
Press CH
to select Sorted No. item.
Press VOL+/- to select a target channel which is to be exchanged with the current channel.
Press CH to select and highlight OK item.
Press ENTER to confirm exchanging contents in current channel and the target channel.
15
001
005
Viewing TV Programs (continued)
Setting Favourite Channel
Video
1
2
3
4
Press MENU to display the menu main page.
5
6
7
8
Press CH
Press VOL+/- repeatedly to display Program menu page.
Press CH
to select Program No item.
Press VOL+/- to select a channel that you want to set as your
favourite channel.
repeatedly to select Favourite item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select On or Off.
Press ENTER to confirm and press MENU repeatedly to exit.
Audio
Screen
Program
Option
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
5
Off
Off
Off
00
AUTO
B/G
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
Off
On
00
AUTO
B/G
You can repeat the above steps to set more favourite channels so that you can cycle among your
favourite channels by pressing the FAV. button.
When you are viewing a favourite channel, a "
" icon appears on the screen while pressing the
DSP/CAPS button.
Editing Program Name
1
Use number buttons to directly select a channel you want to edit
its name.
2
3
4
5
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Program menu page.
Press CH
repeatedly to select Program Name item.
Press ENTER to edit program name.
Use VOL+/- to move cursor right or left.
Use 0~9 number buttons to input characters.
Use DSP/CAPS to switch between lowercase and UPPERCASE.
Use CH to delete a character.
After you finish inputting, you may use ENTER to confirm and return.
The maximum length of program name is 8 characters.
Character List
while pressing DSP/CAPS
0 * # ( )
Button
Character List
0
0 * # ( )
1
1
2
2 ab c @
2 A B C @
3
3 d e f #
3 D E F #
4
4 g h i $
4 G H I $
5
5 j k l %
5 J K L %
6
6 m n o ^
6 M N O ^
7
7 p q r&
7 P Q R&
8
8 s t u v
8 S T U V
9
9 wx y z
9 W X Y Z
- . !
1
- . !
16
Video
Audio
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
Screen
Program
Option
5
ABC_
Off
Off
Off
00
AUTO
B/G
Locking TV Channels
Setting Locking Function On or Off
Video
1
2
3
4
5
6
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
to select Child Lock item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select On or Off.
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
TV
Auto
Off
Off
On
English
Others
On
On
Press ENTER to confirm and press MENU repeatedly to exit.
If the [Child Lock] item is set to [On], the unit detects the child lock status for every channels while you changing
channels or pressing the DSP/CAPS button. If current channel is detected as a locked channel , a " " icon
appears on the screen, otherwise a " " icon appears.
If you set the [Child Lock] item to [On], next time if you want to set the [Child Lock] item to [Off], the unit asks
you to input password.
Locking or Unlocking TV Channels
If the [Child Lock] item is set to [On], the unit asks you to input password if you want to access the
[Program] menu page.
1 Press MENU to display the menu main page.
2 Press VOL+/- repeatedly to display Program menu page.
3 Press CH to select Program No item.
4 Press VOL+/- to select a channel that you want to lock or unlock.
5 Press CH repeatedly to select Locked item.
6 Press VOL+ or ENTER to access the sub-menu.
to select On or Off.
7 Press CH
ENTER to confirm and press MENU repeatedly to exit.
8 Press
You can repeat the above steps to lock or unlock other channels.
9
Video
Audio
Screen
Program
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
Option
05
On
Off
Off
50
AUTO
B/G
Restart the unit to active your setting.
The locking settings may not work unless you restart the unit.
When you select a locked channel, a " " icon appears and the screen is blank. In this situation, if you still want to
view the locked channel, you may follow these steps to unlock:
1. Press FREEZE to display password input page.
2. Enter the password. The default password is "000000".
Once the correct password is inputted, the unit allows you to view all locked channels.
Changing Password
Video
1
2
3
4
5
6
7
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
to select Change Password item.
Press ENTER to confirm.
Input the old password.
Input the new password.
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
TV
Auto
Off
Off
Off
English
Others
On
On
Input the new password again and then the password has been
changed successfully.
Be sure to write down your password and retain it for future use. If you forget the password, the unit
provides a master password as "962326" for you to access the locked channels or change password.
Please DO NOT let the children know the master password.
17
Basic Operation
Changing Channels
Using the Channel Buttons (CH
or CH
)
Press the CH or CH to change channels.
When you press the CH or CH , the unit changes channels in sequence. You will see all the channels that the unit has
memorised.
You will not see channels that were skipped.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel:
Input the channel number by using the 0-9 number buttons directly.
To select a two-digit channel:
Press -/-- to display "- -" and input the channel number by using the 0-9 number buttons.
To select a three-digit channel:
Press -/-- to display "- - -"and input the channel number by using the 0-9 number buttons.
Note:
When you use the number buttons, You may directly select channels that were skipped.
Using the RETURN
button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL- and VOL+)
Press the VOL+ or VOL- to increase or decrease the volume.
Muting the Sound
Using the MUTE
button
At any time, you can temporarily turn off the sound using the MUTE
1
2
Press the MUTE
button.
button and the sound turns off.
To turn mute off, press the MUTE
button again.
Select input source signal
1
2
3
Press SOURCE
to access source select menu.
Select Main Source
Press CH
to select a desired signal source.
You may directly press the relevant number button to select a desired
signal source.
Press ENTER to confirm.
TV ------------------ select TV signal.
Video -------------- select signal from Video terminal.
S-Video ----------- select signal from S-Video terminal.
SCART1 ---------- select signal from 21-PIN SCART 1 interface.
SCART2 AV ----- select signal from 21-PIN SCART 2 interface.
SCART2 Y/C ---- no function.
YPbPr ------------- select signal from YPbPR or YCbCr terminals.
D-Sub ------------- select signal from D-Sub (I 5-pin D-sub) terminals.
DVI ----------------- select signal from DVI terminals.
1. TV
2. Video
3. S-Video
4. SCART 1
5. SCART 2 AV
6. SCART 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
Note:
You may quickly switch from other inputs to TV program by pressing the number buttons or CH
18
.
Setting Picture
Using the Preset Picture Mode
1
Press MENU to display the menu main page.
The [Video] menu page will be highlighted automatically.
2
3
4
5
Press CH
Video
Screen
Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
to select Mode item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
Audio
to select a desired picture mode.
Option
Standard
50
50
50
00
50
Auto
Press ENTER to confirm and press MENU repeatedly to exit.
There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom].
Each preset mode has its own picture settings.
[Vivid]: Select for a bright picture.
[Standard]: Select for a normal picture.
[Mild]: Select for a fine/soft picture.
You may directly use the P.M button on the remote control to select a desired picture mode.
Customising the Picture
Video
1
Press MENU to display the menu main page.
The [Video] menu page will be selected automatically.
2
3
4
Press CH
to enter the menu and select item with CH
or CH .
Press VOL+/- to adjust the value of the item.
Press MENU to exit.
Press VOL-
Adjustment item
Audio
Screen
Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
Option
Custom
40
60
50
00
50
Auto
Press VOL+
Value range
Contrast
Decrease contrast
0 - 100
Increase contrast
Brightness
Less bright
0 - 100
More bright
Colour
Lower colour intensity
0 -100
Higher colour intensity
Hue *
Towards purple
Sharpness
Soft picture
-50 - +50
Towards green
0 - 100
Sharp picture
* The [Hue] item is for NTSC only
Reducing Picture Noise
Video
1
Press MENU to display the menu main page.
The [Video] menu page will be selected automatically.
2
3
4
5
Press CH
Screen
Program
1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR
repeatedly to select the DNR item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
Audio
to select.
Press ENTER to confirm and press MENU repeatedly to exit.
Sometimes a noisy picture may appear on the screen because of poor signal. This function helps
to enhance the picture quality by reducing the noise.
Freezing picture
Press the FREEZE button to hold on the image on the screen (the video
sources still run). Press again to reactivate the image.
Note:
For the sake of protecting the screen, please do NOT freeze a picture for a long time.
19
Option
Custom
40
60
50
00
50
Auto
Setting Sound
Adjusting the Volume
You may quickly adjust the volume by using VOL+ or VOL-. The unit also allows you to adjust volume through OSD
menu as follows.
Video
1
2
3
4
5
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Audio menu page.
Press CH
to select Volume item.
Press VOL+/- to adjust the volume.
Press MENU to exit.
20
00
Rock
65
55
55
55
55
20
1. Volume
2. Balance
3. Equalizer:
4. 120 Hz
5. 500 Hz
6. 1.5 KHz
7. 5 KHz
8. 10 KHz
9. HP Volume
Adjusting the Sound Balance
Video
1
2
3
4
Press MENU to display the menu main page.
5
Press MENU to exit.
Press VOL+/- repeatedly to display Audio menu page.
Press CH
to select Balance item.
Press VOL+ to decrease the left speaker volume
Press VOL- to decrease the right speaker volume.
Audio
Screen
Program
Option
20
00
Rock
65
55
55
55
55
20
1. Volume
2. Balance
3. Equalizer:
4. 120 Hz
5. 500 Hz
6. 1.5 KHz
7. 5 KHz
8. 10 KHz
9. HP Volume
Adjusting the Headphone Volume
1
2
3
4
5
Video
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Audio menu page.
Press CH
to select HP Volume item.
Press VOL+/- to adjust the headphone volume.
Press MENU to exit.
20
00
Rock
65
55
55
55
55
20
1. Volume
2. Balance
3. Equalizer:
4. 120 Hz
5. 500 Hz
6. 1.5 KHz
7. 5 KHz
8. 10 KHz
9. HP Volume
Adjusting Equalizer
The unit provides a Five-Band Equalizer for you to enjoy a high-quality sound. You may select the three preset
sound effects according to different situations or customise the sound effect by yourself.
1
2
3
4
5
6
7
8
9
Video
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Audio menu page.
Press CH
to select Equalizer item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select.
There are three preset sound effects (Live, Pop and Rock) for
your choice according to different situations or you may customise
the sound effect as follows.
Audio
Screen
Program
20
00
Rock
65
55
55
55
55
20
1. Volume
2. Balance
3. Equalizer:
4. 120 Hz
5. 500 Hz
6. 1.5 KHz
7. 5 KHz
8. 10 KHz
9. HP Volume
Video
Audio
Option
Screen
Program
Option
Press ENTER to confirm.
Press CH
or 10KHz.
repeatedly to select 120Hz, 500Hz, 1.5KHz, 5KHz
Press VOL+/- to adjust according to your preference.
Press MENU to exit.
Note:
You may quickly select the preset sound effects by using the S.M button.
20
1. Volume
2. Balance
3. Equalizer:
4. 120 Hz
5. 500 Hz
6. 1.5 KHz
7. 5 KHz
8. 10 KHz
9. HP Volume
20
00
Custom
65
55
55
55
55
20
Setting Sound (continued)
Stereo/Bilingual Selection
You can quickly select sound multiplex mode by using the STEREO button on the remote control.
NICAM Broadcast Selection
This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM broadcasting,
this TV set receives NICAM system stereo, bilingual, and monaural broadcasts.
Stereo
When the TV set is receiving a stereo broadcast, press the STEREO button to select NICAM Stereo or FORCE Mono.
When Force Mono is selected, the TV sound is output monaurally.
Bilingual
When the TV set is receiving a bilingual program, press the STEREO button to select NICAM Dual1, NICAM Dual2
or Force Mono.
IGR (German stereo system) Broadcasts
This enables the selection of the reception mode when receiving an IGR signal. To let you enjoy IGR broadcasting, this
TV set receives IGR system stereo and bilingual broadcasts.
Stereo
When the TV set is receiving a stereo broadcast, press the STEREO button to select FM/AM Stereo or Force Mono.
When Force Mono is selected, the TV sound is output monaurally.
Bilingual
When the TV set is receiving bilingual program, press the STEREO button to select FM/AM Dual1 or FM/AM Dual2.
Note:
When there is no input signal, the unit mutes the sound automatically, the [Audio] menu page can not be accessed
and all operations correlative with audio will be denied.
21
Setting System
Setting Colour System
1
2
3
4
5
6
Video
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- to display Program menu page.
Press CH
repeatedly to select Colour System item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select a proper colour system.
Press ENTER to confirm and press MENU repeatedly to exit.
05
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
Off
Off
Off
50
PAL
B/G
Setting Sound System
Video
1
2
3
4
5
6
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press CH
repeatedly to select Sound System item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
05
1. Program No:
2. Program Name:
3. Locked:
4. Skip:
5. Favourite:
6. Fine Tuning
7. Colour System:
8. Sound System:
9. Auto Search
0. Manual Search
Press VOL+/- to display Program menu page.
to select a proper sound system.
Off
Off
Off
50
PAL
B/G
Press ENTER to confirm and press MENU repeatedly to exit.
Changing Screen Aspect Ratio
Video
1
2
3
4
5
6
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
repeatedly to select Display Mode.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select a desired screen ratio.
Press ENTER to confirm and press MENU repeatedly to exit.
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
TV
16:9 Mode
Off
Off
Off
English
Others
On
On
You may also use the ZOOM button to select the screen aspect ratio between Auto, 16:9 Mode, 4:3 Mode,
14:9 Mode, Panorama and Zoom.
Auto --- For the signal input from SCART interface which format can be identified by the unit.
4:3 --- For 4:3 signal format. This mode displays a 4:3 picture at its standard 4:3 size without any stretching.
16:9 --- For 16:9 signal format. This mode displays a 16:9 aspect ratio picture.
14:9 --- For 14:9 signal format. This mode displays 14:9 aspect ratio picture.
Panorama --- In this mode the picture is progressively stretched towards each side of the screen.
Zoom --- For 4:3 letterbox signal format. This mode stretches the picture horizontally and crops the top and
bottom black bars of the picture
Note:
In TV mode, while the Display Mode is set to [Auto] and WSS is [OFF], the picture will be displayed in 4:3
automatically.
In SCART mode, while the signal format is 16:9, the Display Mode can be toggled between [Auto], [16:9],
[14:9], [Panorama] and [Zoom].
22
System Setting (continued)
Selecting Menu Language
1
2
3
4
5
6
Video
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
repeatedly to select Menu Language item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select a desired menu language.
Press ENTER to confirm and press MENU repeatedly to exit.
Audio
Screen
Option
Program
TV
16:9 Mode
Off
Off
Off
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
English
Others
On
On
Setting WSS
1
2
3
4
5
6
Video
Audio
Screen
Option
Program
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
repeatedly to select WSS item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select On or Off.
Press ENTER to confirm and press MENU repeatedly to exit.
TV
16:9 Mode
Off
Off
Off
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
English
Others
On
On
Off
On
Note:
If the [WSS] (Wide Screen Signalling) function is changed from OFF to On the unit can identify the WSS signal.
Setting Blue Screen
1
2
3
4
5
6
Video
Audio
Screen
Option
Program
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
repeatedly to select Blue Screen item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select On or Off.
Press ENTER to confirm and press MENU repeatedly to exit.
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
TV
16:9 Mode
Off
Off
Off
English
Others
On
On
If the [Blue Screen] is set to [On], the unit displays a blue background when there is no input signal.
In TV mode, when there is no input signal for approx. 5 minutes, the TV set auto goes to STANDBY mode.
Setting Sleep Timer
You can quickly set the sleep timer by using the SLP button on the
remote control. With every press of this button the sleep time
changes as follows:
Cancel
15 Min. 30 Min.
45 Min.
60 Min.
90 Min.
Sleep Time:
30 Minutes
120 Min.
Setting Current Time/Turn Off Timer/Turn On Timer
With the unit working, press TIMER to display Current Time setting
menu, which allows you to set Current Time. You may use VOL+/to toggle hour or minute and CH
to adjust.
With the Current Time menu on the screen, press TIMER again to
display Turn Off Time setting menu, which allows you To set Turn
Off Time. You may use VOL+/- to toggle hour or minute and
CH
to adjust.
With the Turn Off Time menu on the screen, press TIMER again to
display Turn On Time setting menu, which allows you to set Turn
On Time. You may use VOL+/- to toggle hour or minute and
CH
to adjust.
Note:
Current Time
10:56
Turn Off Time
22:00
Turn On Time
18:00
If you want to cancel the Off-Timer or On-Timer function, please set the [Turn Off Timer or [Turn On Time] to [00:00].
23
Off
On
Changing Screen Layout
Selecting Screen Layout
1
2
3
4
5
6
Video
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Option menu page.
Press CH
repeatedly to select MultiWin Mode item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select Off, POP, 6 Windows or 9 Windows.
Press ENTER to confirm and press MENU repeatedly to exit.
Audio
Screen
Program
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
Option
TV
16:9 Mode
Off
POP
Off
English
Others
On
On
Note:
You may quickly select screen layout by using the M.WIN button.
When viewing TV program in full screen, the features of [POP], [6 Windows] and [9 Windows] can be accessed;
When viewing Video or S-Video input, the features of [POP] and [6 Windows] can be accessed;
When viewing SCART, YCbCr/YPbPr, D-Sub or DVI input, the features of [POP], [6 Windows] and [9 Windows] can
not be accessed.
POP (Picture-out-Picture)
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
main window program can come from a TV broadcast, Video or
S-Video input, while the POP window always displays TV program.
Note:
You may use the POP button to quickly turn on or off the POP feature.
Main Window
POP Window
6 Windows
2
When this item is selected, one main window and five scanning windows
display on the screen. The main window program can come from a TV
broadcast, Video or S-Video input.
Scanning
Window
Main Window
3
4
9 Windows
When this item is selected, the screen displays 9 scanning windows.
This function enables you to quickly browse all active channel.
24
1
2
4
5
6
7
8
9
Scanning
Window
3
PIP Operations
Viewing the Picture-in-Picture
This unit includes a two-tuner Picture-in-Picture (PIP) feature. This allows you to watch two live broadcasts simultaneously,
one in the full size "main" picture and one in a smaller "window" picture. The main window program can come from a TV
broadcast or other external source, while the PIP window always displays TV program.
1
With the unit working in single full screen, press MENU to display
the menu main page.
2
3
4
5
Press VOL+/- repeatedly to display Option menu page.
6
Press CH
repeatedly to select PIP Mode item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
to select Off, Up-Left, Up-Right, Down-Right,
Down-Left or Centre.
Off -Turn off PIP feature.
Up-Left -Turn on PIP feature and display the PIP window on up-left
comer of the screen.
Up-Right -Turn on PIP feature and display the PIP window on upright corner of the screen.
Down-Right -Turn on PIP feature and display the PIP window on
down-right corner of the screen.
Down-Left - Turn on PIP feature and display the PIP window on
down-left corner of the screen.
Centre -Turn on PIP feature and display the PIP window on centre
of the screen.
Video
Audio
Screen
Program
1. Main Display Source:
2. Display Mode:
3. PIP Mode:
4. MultiWin Mode:
5. Child Lock:
6. Change Password
7. Menu Language:
8. Country:
9. WSS
0. Blue Screen:
Option
TV
16:9 Mode
Down-left
POP
Off
English
Others
On
On
Main Window
PIP
Window
Press ENTER to confirm and press MENU repeatedly to exit.
Note:
You may use the PIP button to quickly turn on or off the PIP feature.
Using the PIP-POS button
Press the PIP-POS button to quickly select the position for PIP window.
Main frame
PIP frame
Using the Active-WIN button
Press this button to select either the main window or PIP window in
order to perform some operations for the PIP window individually. The
selected PIP window displays with a red border. The unit allows you to
apply many operations to the PIP picture such as adjusting volume,
changing channels, adjusting picture, locking channels, setting favourite
channels.
Note:
Many but not all adjustments and settings can be applied to the PIP window when the PIP window is selected.
The PIP audio is only output through the headphone jack.
Swap the Contents of the PIP Image and Main Image
1
2
Press the PIP button to display the PIP window.
Press the SWAP button to swap the contents of the PIP window
and main window.
Note:
The Swap function does not work unless the signal source of the main window is set to TV Mode.
25
Off
Up-Left
Up-Right
Down-Right
Down-Left
Center
Adjustment in D-Sub/DVI Mode
With working in D-Sub or DVI mode, this unit allows you to perform many adjustments.
Adjusting Image Horizontal Size
Video
1
2
3
4
5
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Screen menu page.
Press CH
to select H Size item.
Press VOL+/- to adjust until you are satisfied.
Press MENU to exit.
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
0
0
0
00
Both off
>>>
Changing the Position of Image
After connecting the unit to your PC, adjust the position of the screen if it is not well-aligned.
Video
1
2
3
Press MENU to display the menu main page.
4
5
Press VOL+/- to adjust until the picture is well-aligned.
Press VOL+/- repeatedly to display Screen menu page.
Press CH to enter the menu and press CH
H Position or V Position.
or CH
to select
Press MENU to exit.
Audio
Screen
Program
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
Option
0
0
0
00
Both off
>>>
Fine Tune
1
2
3
4
5
Video
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Screen menu page.
Press CH
repeatedly to select Fine Tune.
Press VOL+/- to adjust until the picture is well-aligned.
Press MENU to exit.
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
0
0
0
10
Both off
>>>
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience
blurring , you can obtain a clearer image by adjusting the [Fine Tune] item.
Note:
The [Fine Tune] item can not be accessed in DVI mode.
Adjusting the Screen Automatically
Video
1
2
3
4
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Screen menu page.
Press CH
repeatedly to select Auto Sync item.
Press ENTER to confirm and press MENU repeatedly to exit.
You may quickly adjust the screen by using the STEREO button
directly. The unit automatically adjusts phase, clock or position, etc.
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
Note:
The [Auto Sync] item can not be accessed unless the unit is in VGA mode.
The "Auto Adjust" function only works in VGA mode.
26
0
0
0
00
Both off
>>>
Adjustment in D-Sub/DVI Mode (Continued)
Smoothing the Picture
Video
1
2
3
4
5
6
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Screen menu page.
Press CH
repeatedly to select Smoothing Mode item.
Press VOL+ or ENTER to access the sub-menu.
Press CH
Both off.
to select Both on, Only Ver. on, Only Hor. on or
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
0
0
0
00
Both off
>>>
Press ENTER to confirm and press MENU repeatedly to exit.
When the screen displays a picture with a bevel edge, you may find a sawtooth picture on the bevel edge.
This function helps to improve the picture quality by smoothing the sawtooth picture.
Both on - Smooth picture in the horizontal and vertical directions;
Only Ver. on - Smooth picture in the vertical direction;
Only Hor. on - Smooth picture in the horizontal direction;
Both off -Turn off this function.
Loading Default Values
Video
1
2
3
4
Audio
Screen
Program
Option
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Screen menu page.
Press CH
repeatedly to select Default item.
Press ENTER to confirm and press MENU repeatedly to exit.
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
0
0
0
00
Both off
>>>
Advanced Adjustment for Image Position
It is unnecessary to perform advanced adjustment in normal case. In most cases, the [Auto Sync] function is
able to adjust and rectify the picture automatically. But, sometimes, if you find that the image position can not
be correctly displayed even if you have adjusted the [H Position], [V Position] or [Auto Sync] item, please try
to perform advanced adjustment for the image position.
Video
1
Press MENU to display the menu main page.
2
Press VOL+/- repeatedly to display Screen menu page.
3
Press CH
4
Press VOL+ or ENTER to access the sub-menu.
5
6
7
Press CH
Audio
Screen
Program
1. H Size
2. H Position
3. V Position
4. Fine Tune
5. Smoothing Mode:
6. Default
7. Auto Sync
8. Advanced:
repeatedly to select Advanced item.
Video
to select H Position or V Position item.
Press VOL+/- to adjust the image position.
Audio
2. H Position
3. V Position
Press ENTER to confirm and press MENU repeatedly to exit.
27
Option
0
0
0
00
Both off
>>>
Screen
Program
Option
0
0
Teletext
What Is Teletext?
Teletext broadcasts pages of information and entertainment to specially equipped television sets.
Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format
for viewing. News, weather and sports information, stock exchange prices and programme previews are
among the many services available.
Teletext Mode
Teletext is turned on/off with the TEXT button on the remote control unit. You can
operate your System in Teletext mode directly by inputting commands with the
remote control unit.
Turning On or Off Teletext
Select a TV channel providing the Teletext program.
Press the TEXT button to display the Teletext with black background.
Press the TEXT button again to switch back to TV screen.
Button Functions
CH or CH
Changing Teletext pages.
VOL+ or VOLAdjusting volume.
MUTE
Muting the sound.
Colour (RED/GREEN/YELLOW/BLUE)
You can select a group or block of pages displayed in the coloured brackets at the
bottom of the screen by pressing the corresponding colour (RED/GREEN/
YELLOW/BLUE) on the remote control unit.
0-9
Directly select any page by using 0-9.
MIX
Press this button to display the Teletext on the screen with transparent background
while viewing the TV program simultaneously.
REVEAL
Press the button to reveal hidden information such as an answer to a quiz. Press
the button again to hide the information.
SIZE
Press the button to expand the top half of the display. Press it again to expand the
bottom half of the display. Press it once more to resume normal size.
HOLD
Press the button to stop updating Teletext pages automatically. Press it again to
release hold mode.
UPDATE
Press the button to view the updated teletext page.
Display the TV picture on the screen while waiting for the new teletext page. The characters "???" will appear at
the top of left corner of the screen. Then you can input a desired page number. When the update page is available,
then the characters "???" will change to the page number.
28
Troubleshooting
Before calling for repair service, check the following items for possible remedies to an
encountered symptom.
Symptoms
Check item
"Ghost" or double images
This may be caused by obstruction to the antenna due to high rise buildings
or hills. Using a highly directional antenna may improve the picture.
No power
Check that the AC power cord is plugged into the mains socket.
Unplug the power cord, wait for 60 seconds. Then reinsert plug into
the mains socket and turn on the unit again.
No picture
Check antenna connections at the rear of the unit to see if it is properly
connected to the unit.
Possible broadcast station trouble. Try another channel.
Adjust the contrast and brightness settings.
Select a correct input.
Is a non-compatible signal being input?
Good picture but no sound
Increase the VOLUME.
Check that the unit is not muted.
Good sound but poor colour
Adjust the contrast, colour and brightness settings.
Poor picture
Horizontal dotted line
Television not responding to
remote control
Sometimes, poor picture quality occurs when having activated an S-VHS
camera or camcorder connected and having connected another peripheral
at the same time. In this case, switch off one of the other peripherals.
Check whether the room is too bright.
This may be caused by electrical interference (e.g. hair dryer, nearby
neon lights, etc.)
Turn off the equipment.
Check whether the batteries are working. Replace if necessary.
Clean the remote control sensor lens on the unit.
Do not use the remote control under strong or fluorescent lighting.
The batteries should be inserted with polarity (+, -) aligned.
Snowy picture and noise
Check the aerial connection.
No stable or not
synchronised D-Sub picture
Check if you have selected the correct D-Sub mode in your PC.
No output from one of the speakers
Adjust Balance in the Audio menu.
Controls buttons do not work
Unplug the power cord, wait for some seconds. Then re-plug the power
cord and turn on the unit again.
Do not use in hot and cold rooms (location)
When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leaves the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: 00C to +500C; Working temperature: 50C to 400C.)
Note:
If your problem is not solved, restart your TV by turning it off and then on again once.
Never attempt to repair a defective TV yourself.
29
Specifications
Type
LCD TV
Display Size diagonal
81CM
Display Feature
LCD Panel
TFT-LCD
Resolution
1366 x 768
Pixel Pitch
0.1730(H) x 0.5190(V) mm2
Maximum Colours
16,700,000
Brightness
550 nits
Contrast
800:1
Viewing Angle
170 0 /170 0
Response Time
12ms (Grey to grey Typ.)
TV System
PAL/SECAM BG, DK, PAL-I, SECAM-L, SECAM-L', NTSV (AV)
Channel Coverage
System
VHF
UHF
CATV
PAL-D/K
1-12
13-57
Z1~Z37
PAL-B/G
2-12
21-69
X~Z+2, S1~S41
PAL-I
2-12
21-69
SECAM-B/G
2-12
21-69
SECAM-D/K
1-12
21-69
SECAM-L'
2-4
SECAM-L
5-12
X~Z+2, S1~S41
21-69
X~ZC57, S1~S41
Teletext
TOP/FLOF TELETEXT
Maximum Audio Output
10W x 2
Power Supply
100-240C AV 50/60Hz
Power Consumption
200W (Max)
Unit Weight (kg)
21 (With stand)
Unit Dimensions (WxHxD) (mm)
936.8 x 562.7 x 220 (With Stand)
Terminals
Video In
RF: TV/CATV 75ohms coaxial x 1
D-Sub x 1, DVI-D x 1
YPbPr/YCbCr (support HDTV): RCA 75 ohms x 1
Video RCA 75ohms x 1
S-Video x 1
Audio In
3.5mm Stereo mini phone jack for D-Sub x 1
3.5mm Stereo min phone for DVI-I x 1
L/R RCA for YPbPr/YCbCr x 1
L/R RCA for Video In x 1
Other
21-Pin Euro Scart x 2
Headphone: 3.5mm Stereo mini phone jack
30
Specifications (continued)
Supported Display Format:
D-Sub/DVI-D: 1024 x 768 @ 75Hz, 70Hz, 60Hz
720 x 400 @ 70Hz
800 x 600 @ 75Hz, 72Hz, 60Hz
640 x 480 @ 75Hz, 60Hz
YPbPr:
480i @ 60Hz
576i @ 50Hz
480P @ 60Hz
576P @ 50Hz
720P @ 50Hz, 60Hz
1080i @ 50Hz, 60Hz
Optional accessories
1 User Manual
1 AC Power Cord
1 Remote Control
2 AAA Batteries
1 Audio/Video Cable (RCA)
1 D-Sub Cable
1 RF Coaxial Cable
1 Component-Video Cable (YPbPr/YCbCr)
1 Audio Cable (RCA)
1 Audio Cable (RCA to Stereo mini phone jack)
2 21-pin Scart Converters
Design and specification are subject to change without notice.
31
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-L32M5S3-03
Ver. 1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement