Panasonic PT-EX16KU Operating instructions

Panasonic PT-EX16KU Operating instructions
Operating Instructions
Network Operations
LCD Projector   Commercial Use
Model No.
PT-EX16K
 This manual explains the network operation of the projector.
For information other than the network operation, such as the usage, inspection and replacement of parts,
see “Operating Instructions - Projector Operations”.
ENGLISH
SO-K2TA
Contents
Request Regarding Security · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3
What you can do· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Check your computer· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
Necessary environment for computers to be connected· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
NETWORK menu· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Displaying the NETWORK menu· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Projector name · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6
Network setup· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7
Network control · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8
Network status· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9
Network factory default· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Connecting with Wired LAN· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Computer operation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Using Web Browser· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 11
Accessing from the Web browser· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 11
PJLink protocol· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 23
Control commands· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 23
PJLink security authorization· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 23
Control commands via LAN· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 24
When WEB Control administrator rights password is set (Protect mode)· · · · · · · · · · · · · · · · · · · · · · 24
When WEB Control administrator rights password is not set (Non-protect mode)· · · · · · · · · · · · · · · · · · · 25
Glossary· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 26
Trademarks · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 26
The illustrations and screenshots in this manual may be different from those on your computer.
Expressions used in this document
Pages to reference within this document are indicated as (See page ○○), and pages to reference in the
supplemental “Operating Instructions - Projector Operations” are indicated as (See page ○○ of the Projector
Operations).
2
Request Regarding Security
When using this product, security breaches of the type described below are conceivable.
• Leakage of your private information via this product
• Illegal operation of this product by a malicious third-party
• Harm to or cessation of operation of this product by a malicious third-party
Be sure to implement sufficient security measures.
• Set passwords, and limit the users that are permitted login access.
• Make sure the password is as hard to guess as possible.
• Change the password periodically.
• Panasonic Corporation and its affiliated companies never directly ask customers for their password. Do not give
out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.
• Always use on a network that has safety protection such as a firewall implemented.
What you can do
<WEB control> (See page 11)
The following operations are possible when using WebBrowser.
• Setting and adjusting the projector
• Displaying the projector status
• Setting for message transmission
<PJLink> (See page 23)
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol
is used.
• Setting the projector
• Querying the projector status
<Command control>
(Refer to “Serial terminal” in “Technical Information” of the Projector Operation manual)
You can control the projector from a computer, using the control commands of the serial terminals.
3
Check your computer
Necessary environment for computers to be connected
• First, check your computer to see whether or not it has a wired LAN  function.  “Glossary” (See page 26)
• Before connecting the projector to the computer, be sure to check the following settings.
 Wired LAN
 For LAN cable
• Is the cable properly connected?
• Use LAN cable that is compatible with category 5 or above.
Check 1
 Wired LAN settings
<Computer with a built-in wired LAN function>
• Is your wired LAN switched on?
<Computer without a built-in wired LAN function>
• Is your wired LAN adapter properly recognized?
• Is your wired LAN adapter switched on?
• Install the wired LAN adapter driver beforehand.
For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.
Check 2
Check 3
 For WebBrowser
• WebBrowser is necessary to use WEB control.
• Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6
• Compatible WebBrowser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)
Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our
hand (body) causing a malfunction.
4
NETWORK menu
To connect the projector and the computer by changing the setting at the time of purchase, change the setting by
displaying the menu with the following procedure.
Displaying the NETWORK menu
1
Press the <MENU> button on remote control.
2
Select [NETWORK] with the ▲▼ buttons.
3
Press the <SELECT> button.
The main menu appears.
The network menu appears.
You can select the sub-menu item.
Unavailable items on the menu screen are grayed out and cannot be selected.
5
NETWORK menu (continued)
Projector name
You can change the projector name to be displayed on the network.
1
Press ▲▼ to select [Projector name], and press <SELECT> button.
Projector name
PT-EX16K
2
Select characters with the ▲▼◄► buttons
and press the <SELECT> button to enter the
projector name.
3
Select [SET] with the ▲▼◄► buttons and press
the <SELECT> button.
Select [CANCEL] to undo the changes and then press the
<SELECT> button.
4
6
Select [YES] or [No] with the ▲▼◄► buttons and
press the <SELECT> button.
NETWORK menu (continued)
Network setup
You can make detailed wired LAN settings.
1
Press ▲▼ to select [Network setup], and press <SELECT> button.
2
Press ▲▼ to select an item, and change the setting according to the instructions.
The detailed [Network setup] screen will be displayed.
DHCP 
(DHCP client function)
If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
Off:
If a DHCP server does not exist in the network to which
the projector is connected, additionally set [IP address],
[Subnet mask ] and [Default gateway ].
IP address 
Enter the IP address if DHCP server is not used.
Subnet mask
If not using a DHCP server, enter the subnet mask.
Default gateway 
Enter the gateway address if DHCP server is not used.
DNS
Sets IP address of the DNS server.
(Display of IP address and setting)
(Displaying and setting the subnet mask)
(Display of gateway address and setting)

3
On:
“Glossary” (See page 26)
Press ▲▼◄► to select [Set], and press <SELECT> button.
Save the current network settings.
Before using the DHCP server, make sure the DHCP server is already functioning.
For details of IP address, subnet mask, gateway and DNS, ask the network administrator.

Default wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP
IP address
Subnet mask
Default gateway
DNS 1
DNS 2
Off
192.168.10.100
255.255.255.0
192.168.10.1
7
NETWORK menu (continued)
Network control
Set when you want to control the projector from a computer connected to the network.
1
2
Press ▲▼ to select [Network control].
Press <SELECT> button or the ► button to access the submenu.
Select [WEB control], [PJLink control], [Command control], [AMX D.D.] items with
the ▲▼ buttons.
For more details about AMX D.D., visit http://www.amx.com/.
8
NETWORK menu (continued)
Network status
This function shows the LAN setting environment of the currently selected projector.
1
Press ▲▼ to select [Network status].
2
Press <SELECT> button or the ► button to show the information of the current
projector status.
9
NETWORK menu (continued)
Network factory default
You can reset the network setting to the factory default of the projector.
1
Press ▲▼ to select [Network factory default], and press <SELECT> button.
2
A confirmation box appears and select [Yes] and then press <SELECT> button. Another
confirmation box appears and select [Yes] and then press <SELECT> button.
Connecting with Wired LAN
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
1
Turn on the computer.
2
Make the network setting according to your system administrator.
If the projector settings are the default settings, the computer can be used with the following network
settings.
DHCP
IP address
Subnet mask
Default gateway
DNS 1
DNS 2
10
Off
192.168.10.101
255.255.255.0
192.168.10.1
Using Web Browser
Accessing from the Web browser
1
2
Activate the Web browser in the personal computer.
Enter the IP address set by the projector into the URL input field of the Web
browser.
3
Enter your “User name” and “Password”.
4
Click [OK] to display the Projector status
page.
The factory default settings are user1 (user
privileges) or admin1 (administrator privileges) for
the use name and panasonic (lowercase letters) for
the password.
“Projector status” page is displayed.
Avoid activating two or more Web browser simultaneously to work out setting or control actions.
Change the password first of all.
Administrator privileges enable the use of all functions. User privileges enable the use of only “Projector status”,
“Network status”, “Basic control”, “Advanced control”, and “Change password”.
If the password is incorrectly entered three times in a row, the lock is set for several minutes.
If you want to control the projector using a Web browser, set [Network control] in the network menu to [On].
11
Using Web Browser (continued)
 Description of each item
1
2
3
4
5
6
1 Page selection tabs
Click these to switch pages.
2 Monitor information button
Click this item, and the status of the projector is
displayed.
3 Projector control button
Click this item to display the projector control
page.
4 Detailed set up button
Click this item to display the advanced settings page.
5 Change password button
Click this button to display the password change
page.
6 Language switch button
Click this button to switch language between English
and Japanese.
Projector status page
Click [Status], then [Projector status] to display the Status information page.
This page displays the projector statuses established for the items shown below.
1
5
6
7
8
9
10
11
12
2
3
4
13
14
1 Displays the type of projector.
2 Displays the firmware version of the projector
main unit.
3 Displays the power source status.
4 Displays the selection of the lamps.
5 Displays the serial number of the projector.
6 Displays the firmware version of the network.
7 Displays the shutter status.
12
8 Displays the lamp power status.
9 Displays the status of input switch.
10 Displays the intake temperature status of the
projector.
11 Displays the optics module temperature status of
the projector.
12 Displays the usage time of each lamp.
13 Displays the self diagnostics information.
(See page 13)
14 Displays the operating time of the projector.
Using Web Browser (continued)
Error information page
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click
the part to display the details of the error.
• Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
OK:
Normal operation
FAILED:Occurrence of trouble
 When [FAILED] has appeared for an item
Parameter
Description
MAIN CPU BUS
Trouble has occurred in the microcomputer circuitry. Consult your dealer.
FAN
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR TEMPERATURE
Intake air temperature is high. It could be because it is used in an environment of high
temperature such as close to a heating device, etc., the air intake is blocked, or the air
filter is clogged.
EXHAUST AIR TEMPERATURE
Exhaust air temperature is high. Exhaust may be blocked, or high altitude mode may be
set wrong.
LAMP REMAIN TIME
The lamp runtime has exceeded the prescribed cumulative time, and it is now time to
replace the lamp.
LAMP STATUS
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
INTAKE AIR TEMP.SENSOR
Trouble has occurred in the sensor used to detect the intake air temperature.
Consult your dealer.
EXHAUST AIR TEMP.SENSOR
Trouble has occurred in the sensor used to detect the exhaust air temperature.
Consult your dealer.
BATTERY
The backup battery has been run out. Consult your dealer.
AIRFLOW SENSOR
Trouble has occurred in the sensor used to detect the airflow volume. Consult your dealer.
COVER OPEN
Installation of lamp cover is incomplete. Check the installation of the lamp cover.
FILTER UNIT
The air filter unit is not mounted. Confirm the installation of the air filter unit.
AIR FILTER
Too much dust is on the air filter.
Following the procedure described on page 26 of the “Operating Instructions - Projector
Operations”, unplug the AC power cord and clean the air filter.
13
Using Web Browser (continued)
Network status page
Displays the current configuration information of the network.

Displays the configuration details of wired LAN.
Basic control page
To move from another page, click [Projector control], then [Basic control].
1
2
3
4
1 Power On/Off control
2 Use these to select the input signals
14
3 Switches image mode
4 Turn on or off the Shutter function
Using Web Browser (continued)
Detail control page
Click [Projector control], then [Advanced control] to display the Detail control page.
1
2
3
4
1 Execute Auto setup function
3 Operations on Screen mode
2 Operations on Image adjust
4 Operations on Rear/Ceiling
5
6
7
8
5 Operations on Keystone function
7 Operations on Zoom
6 Operations on Lens shift
8 Operations on Focus
9
10
9 Operations on Test pattern
10 Return to factory default setting
15
Using Web Browser (continued)
Change Password page
Click [Change password].
1 Administrator
2 User
1
2
 Administrator mode
 User account
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Account
Current user name input field
Current password input field
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
1
1
2
3
4
5
Account
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
1
2
3
4
Current password input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
2
3
4
5
 User mode
A user can change password only.
1
2
3
4
- When changing the administrator account, both “Current user name” and “Current password” are required.
- No account is not available .
- Administrator account and user account should be differed.
16
Using Web Browser (continued)
Network config page
You can make detail network settings on projector, when connecting without the administrator authority or when
connecting through an access point (infrastructure mode).
 LAN settings
1
Click [Detailed set up] in the menu.
2
Select the items to change and click [Next].
3
Complete the detailed settings and click [Next].
The settings window appears, showing the current settings.
To change the LAN settings, click [Change].
To return to the previous window, click [Back].
When [Next] is clicked, the next page appears, enabling you
to complete the detailed settings as desired.
Settings performed here are the same as the settings
performed with the [Network] menu of the projector.
4
Click [Submit].
The settings will be registered.
Changing the setting of LAN while connected with LAN might disconnect the connection.
17
Using Web Browser (continued)
Ping test page
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
1
2
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
18
Using Web Browser (continued)
E-mail setup page
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1
2
3
4
5
6
1 Select ENABLE to use the e-mail function.
2 Enter the IP address or server name of the e-mail
server (SMTP). The DNS server must be set if the
server name is entered.
3 Enter the e-mail address of the projector.
(maximum 63 characters)
4 The user can enter the location of, for example,
the installed projector so that the recipient may
easily identify the originator of the e-mail.
(maximum 63 characters)
5 The user can modify the minimum time interval
of temperature warning mail. The default value
is 60 minutes. In this case, the user cannot send
another mail for 60 minutes after sending previous
temperature warning mail even the set warning
temperature is reached again.
6 Select the temperature of the intake sensor at
which to send a warning message.
1
2
1 Enter the E-mail Address1 of your desired recipient.
2 Select the conditions for sending e-mail.
MAIL CONTENTS:
Select [NORMAL] or [SIMPLE].
ERROR:
An error is detected by self-diagnosis.
LAMP1-4 RUNTIME:
Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.
19
Using Web Browser (continued)
E-mail setup page (continued)
1
2
1 Enter the E-mail Address2 of your desired recipient.
2 Select the conditions for sending e-mail.
MAIL CONTENTS:
Select [NORMAL] or [SIMPLE].
ERROR:
An error is detected by self-diagnosis.
LAMP 1-4 RUNTIME:
Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.
Authentication set up page
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
1
2
3
4
5
6
7
8
1 Select the authentication method specified by
your Internet service provider.
2 Set this if SMTP authentication has been
selected.
3 POP server name field
Available input characters:
Alphanumeric characters (A - Z, a - z, 0 - 9),
hyphen (-), period (.)
4 POP/SMTP server user name field
20
5 POP/SMTP server password field
6 Enter the port number for the SMTP server
(normally “25”).
7 Enter the port number for the POP server
(normally “110”).
8 Button to update settings
Using Web Browser (continued)
Contents of mail sent
 Mail with the contents shown below is sent when the e-mail settings have been established.
21
Using Web Browser (continued)
 Mail with the contents shown below is sent when an error has occurred.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1
2
1 Input the port number to be used with command control
2 Setting update button
22
PJLink protocol
The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform
projector setting and projector status query operations from a computer.
Control commands
The following table lists the PJLink protocol commands that can be used to control the projector.
Command
Control details
POWR
Power supply control
POWR ?
Power supply status query
INPT
Input selection
INPT ?
Input selection query
AVMT
AV MUTE control
AVMT ?
AV MUTE status query
ERST ?
Error status query
Notes
Parameters
0 = Standby
1 = Power ON
Parameters
0 = Standby
1 = Power ON
2 = Cool-down in progress
Parameters
11:RGB 1 12:RGB 2 31:DIGITAL 1 32: DIGITAL 2 33: DIGITAL 3
46:AUX1 21:VIDEO 1 22:VIDEO 2 13:RGB 3 25: VIDEO 5
47:AUX2 48:AUX3 49:AUX4
Parameters
30 = AV MUTE mode off
31 = AV MUTE mode on
Parameters
1st byte : Indicates fan errors, range 0 – 2
2nd byte : Indicates lamp errors, range 0 – 2
3rd byte : Indicates temperature errors, range 0 – 2
4th byte : Fixed at 0
5th byte : Indicates filter errors, range 0 – 2
6th byte : Indicates other errors, range 0 – 2
Definitions for each value from 0 to 2 are as follows.
0 = No error known
1 = Warning
2 = Error
Parameters
1st digits (1 – 5 digits) : Lamp cumulative operating time
2nd digit : 0 = Lamp off, 1 = Lamp on
LAMP ?
Lamp status query
INST ?
Input selection list query
The following are returned as parameters.
“ 11 12 31 32 33 21 22 13 25 46 47 48 49”
NAME ?
INF1 ?
INF2 ?
INF0 ?
CLSS ?
Projector name query
Manufacturer name query
Model name query
Other information query
Class information query
The name set for [NAME CHANGE] in [NETWORK] is returned.
“Panasonic” is returned.
Answer the model name with EX16K
Information such as version number is returned.
“1” is returned.
PJLink security authorization
When using PJLink with security authorization, either of the password set for administrator privileges and the
password set for user privileges with Web browser control can be used as the password for PJLink (See page 16).
When using PJLink without security authorization, set use without the password for administrator privileges and the
password for user privileges of Web browser control.
For specifications regarding PJLink, refer to the Japan Business Machine and Information System Industries
Association website.
URL http://pjlink.jbmia.or.jp/
23
Control commands via LAN
When WEB Control administrator rights password is set (Protect mode)
Connection method
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address : Obtain from MAIN MENU → [Network] → [Network status]
Port No. :
Acquire from the WEB control “Detailed set up” → “Command port setting” page
2) There is a response from the projector.
Response data
Data section
Blank
Mode
Blank
Random number
section
Termination
symbol
“NTCONTROL”
(ASCII string)
‘  ’
0x20
‘1’
0x31
‘  ’
0x20
“zzzzzzzz”
(ASCII code hexadecimal
number)
(CR)
0x0d
9 bytes
1 byte
1 byte
1 byte
8 bytes
1 byte
Mode : 1 = Protect mode
3) Generate a 32-byte hash value from the following data using MD5 algorithm.
“xxxxxx:yyyyy:zzzzzzzz”
xxxxxx :
Administrator rights user name for WEB CONTROL (Default user name is “admin1”)
yyyyy :
Password of above administrator rights user (Default password is “panasonic”)
zzzzzzzz :
8-byte random number obtained in Step 2
Command transmission method
Transmit using the following command format.
Transmitted data
Header
Data section
Termination symbol
Hash value
(See above
<Connection method>)
‘0’
0x30
‘0’
0x30
Control command
(ASCII string)
(CR)
0x0d
32 bytes
1 byte
1 byte
Undefined length
1 byte
Receive data
Header
Data section
Termination symbol
‘0’
0x30
‘0’
0x30
Control command
(ASCII string)
(CR)
0x0d
1 byte
1 byte
Undefined length
1 byte
Error response
Error message
“ERR1”
“ERR2”
“ERR3”
“ERR4”
“ERR5”
“ERRA”
Undefined control command
Out of parameter range
Busy state or no-acceptable period
Timeout or no-acceptable period
Wrong data length
Password mismatch
4 bytes
24
Termination symbol
(CR)
0x0d
1 byte
Control commands via LAN (continued)
When WEB Control administrator rights password is not set (Non-protect mode)
Connection method
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and
make a request for connection to the projector.
Acquire the IP address from the menu screen of the projector, and the port number from the WEB control
page.
IP address : Obtain from MAIN MENU → [Network] → [Network status]
Port No. :
Acquire from the WEB control “Detailed set up” → “Command port setting” page
2) There is a response from the projector.
Response data
Data section
“NTCONTROL”
(ASCII string)
9 bytes
Mode : 0 = Non-protect mode
Blank
‘  ’
0x20
1 byte
Mode
‘0’
0x30
1 byte
Termination symbol
(CR)
0x0d
1 byte
Command transmission method
Transmit by the following command format.
Transmitted data
‘0’
0x30
1 byte
Header
‘0’
0x30
1 byte
Data section
Control command
(ASCII string)
Undefined length
Termination symbol
(CR)
0x0d
1 byte
‘0’
0x30
1 byte
Data section
Control command
(ASCII string)
Undefined length
Termination symbol
(CR)
0x0d
1 byte
Receive data
‘0’
0x30
1 byte
Header
Receive data
“ERR1”
“ERR2”
“ERR3”
“ERR4”
“ERR5”
“ERRA”
Error message
Undefined control command
Out of parameter range
Busy state or no-acceptable period
Timeout or no-acceptable period
Wrong data length
Password mismatch
4 bytes
Termination symbol
(CR)
0x0d
1 byte
25
Glossary
Item
Descriptions
See
page
7
10
DNS
Abbreviation for Domain name system. This function sets IP address of the DNS
server.
DHCP
Abbreviation for Dynamic Host Configuration Protocol. This function
automatically assigns IP addresses to the connected equipment. If a device with
the DHCP server function is present within a LAN, it automatically assigns IP
addresses to the connected equipment
7
10
Default gateway
The devices that are used for different network standards from yours. Default
Gateway enables a connection with other network, by adjusting bilateral
differences such as communication protocols. If no gateway is specified for the
IP address of access destination, data will be sent to the host set as the default
gateway.
7
10
IP address
Internet Protocol (IP) is a protocol for distributing data, and the address
corresponding to the data distribution destination is called the IP address. The
same IP address cannot be used within the same LAN.
7
10
LAN
Abbreviation for Local Area Network. This is a network with a relatively narrow
range such as inside a company.
7
Subnet
This limits the range of the IP addresses assigned to computers in order to
divide the network into a number of sections during TCP/IP connection. The
value used to divide the network at this time is called the subnetmask.
7
10
Trademarks
• Microsoft® and its logos, Windows®, Windows® XP, Windows Vista®, Windows® 7, and Internet Explorer ® are the
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac OS and Safari are the trademarks of Apple Inc. registered in the United States and other
countries.
• PJLink is a pending trademark in Japan, the United States and other countries and regions.
• Other company names, product names or other names noted in this manual are trademarks or registered
trademarks of the respective companies. Note that ® and ™ marks are not indicated in the text of this manual.
Notes:
• Unauthorized use or reproduction of part or all of this manual is strictly prohibited.
• Panasonic cannot be held liable for any effects resulting from the use of this manual.
• Panasonic reserves the right to revise this manual contents without notice.
26
ヱ㄂ㄏ㄂ㄔㄐㄏㄊ㄄チヤㄐㄓㄑㄐㄓ㄂ㄕㄊㄐㄏ
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement