PASCO Specialty & Mfg. ME-9806 User's Manual

Add to my manuals
1 Pages

advertisement

PASCO Specialty & Mfg. ME-9806 User's Manual | Manualzz

® I n s tr u c t i o n S he e t

0 1 2 - 1 0 2 7 8 A

Photogate Brackets

ME-9806

6.

Insert a small thumbscrew through the upper slot of the bracket and into the mounting hole in the photogate.

Note: Use the shorter thumbscrew (3/8 inch, 10 mm) included with the brackets, not the longer screw that came with the photogate.

1

2 3

4

Included Equipment

1. Brackets (2 pieces)

2. Square Nuts (2 pieces)

3. Large Thumbscrews,

1/4-20 × 9/16 (2 pieces)

4. Small Thumbscrews,

6-32 × 3/8, (2 pieces)

Replacement Parts

ME-9806 (complete set)

ME-9823 (IDS Spares Kit)

The Photogate Brackets set includes parts for mounting two photogates on a PASCO dynamics track. The brackets attach to the T-slots on the sides of a dynamics track.

1.

Loosen (but do not remove) the square nut on the thumbscrew.

2.

Slide the nut into the

T-slot at the end of the track.

3.

Slide the bracket along the track to the desired location.

4.

Tighten the thumbscrew to secure the bracket.

5.

Remove the rod-mounting clamp from a photogate.

800-772-8700

7.

Adjust the height of the photogate.

8.

Tighten the thumbscrew to secure the photogate.

Technical Support

For assistance with any PASCO product, contact PASCO at:

Address: PASCO scientific

10101 Foothills Blvd.

Roseville, CA 95747-7100

Phone: 916-786-3800 (worldwide)

800-772-8700 (U.S.)

Fax:

Web:

(916) 786-7565 www.pasco.com

Email: [email protected]

Limited Warranty For a description of the product warranty, see the

PASCO catalog.

Copyright The PASCO scientific 012-10278A Photogate Brackets Instruction Sheet is copyrighted with all rights reserved.

Permission is granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances, without the written consent of PASCO scientific, is prohibited.

Trademarks PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in the United

States and/or in other countries. For more information visit www.pasco.com/legal.

www.pasco.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement