Storage Bins Storage Bins Features •Application storage capacity from 242 lbs (110 kg) to 1807 lbs (821 kg) •Ultra-low profile - 28 inches (711 mm) to 66 inches (1676 mm) tall •Multiple bin tops provide an easy solution for mounting ice makers on different sized bins •Each polyethelyne bin liner is insulated with foam for maximum ice preservation - 1.5 To 3 inches of insulation •Perfect-fit seal for improved ice preservation •Rugged, fingerprint-proof door •Built-in ice scoop holders on featured models •Sturdy leg design - 6 inch adjustable NSF approved legs - standard •Stainless exterior •Corrosion-proof bin liner ORDERING AND SPECIFICATION INFORMATION Required Bin Top Bin Model No. App. Storage Rating ARI Bin Storage lbs. (kgs) Bin Weight lbs. (Kgs.) ICE Series™ Cube Ice Makers Pearl Ice Makers Flake Ice Makers 22" wide 30" wide 48" wide 21" wide 30" wide 42" wide 16" wide 48" wide B25PP 242 (110) 190 (86) 74 (34) KBT19 Not Required N/A KBT19 Not Required N/A KBT8 N/A B40PS 344 (156) 270 (123) 120 (54) KBT19 Not Required N/A KBT19 Not Required N/A KBT8 N/A B42PS 351 (160) 275 (125) 128 (58) Not Required N/A N/A KBT24 N/A N/A KBT14 N/A B55PS 510 (232) 400 (182) 148 (67) KBT19 Not Required N/A KBT19 Not Required N/A KBT8 N/A B100 PS 854 (388) 670 (304) 191 (87) Not Available KBT5 Not Required KBT23 KBT23 KBT26 KBT7, KBT9 (2) Not Required B120SP/SS 1142 (519) 896 (407) 304 (138) Included Included Included KBT23 N/A KBT26 Not Included Not Required B150SP/SS 1447 (658) 1135 (515) 338 (153) Included Included Included N/A N/A N/A Not Included Not Required B170SP/SS 1807 (821) 1417 (643) 390 (177) Included Included Included N/A N/A N/A Not Included Not Required • = Bin Top is included for each cube ice maker—must specify ice maker application when ordering bin. Bin Top is not included for Flake ice makers. Bin Height includes 6" (423mm) legs. All bins have polyethylene liners. 11100 E. 45th Avenue Denver, CO 80239 Phone: 1. 866. PURE. ICE Fax: 303. 371.6296 www.iceomatic.com Rev: Part: A-02/09 3000 Storage Bins Dimensions 6 3/4” (172mm) 5 1/4” (133mm) 15” (381mm) B25 31” (787mm) B40 28” 22” (559mm) (711mm) Rear Bin Drain 3/4” (19mm) F.P.T. 6” (152mm) to 7” (178mm) Adjustable Legs 30” (762mm) 31 1/2” 37 1/2” (800mm) (953mm) 15” (381mm) Rear Bin Drain 3/4” (19mm) F.P.T. 31” (787mm) B42 11” (279mm) Rear Bin Drain 3/4” (19mm) F.P.T. 6” (152mm) to 7” (178mm) Adjustable Legs 30” (762mm) 31” (787mm) B100 50” 44” (1270mm) (1118mm) 15” (381mm) 50” 44” (1270mm) (1118mm) Rear Bin Drain 3/4” (19mm) F.P.T. 24” (610mm) Rear Bin Drain 3/4” (19mm) F.P.T. 6” (152mm) to 7” (178mm) Adjustable Legs 30” (762mm) 31” (787mm) 54” (1372mm) 14 1/2” (368mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 31” (787mm) 13” (330mm) 34” (864mm) 48” (1219mm) 6” (152mm) to 7” (178mm) Adjustable Legs 48” (1219mm) B150 B120 6” (152mm) to 7” (178mm) Adjustable Legs 22” (559mm) 6 3/4” (172mm) 6 3/4” (172mm) B55 50” 44” (1270mm) (1118mm) B170 54” (1372mm) 54” (1372mm) 14 1/2” (368mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 13” (330mm) 34” (864mm) 60” (1524mm) 14 1/2” (368mm) IPS Plastic Bin Drain 1” (25mm) Centered at Bottom of Bin 13” (330mm) 60” (1524mm) 34” (864mm) 23 1/2” (597mm) 23 1/2” (597mm) 23 1/2” (597mm) 48” (1219mm) 48” (1219mm) 30” (762mm) KBT8 Bin Top for 30” (762mm) bins with (1) 16” (406mm) EMF Flake Ice Makers KBT7 Bin Top for 48” (1219mm) bins with (1) 16” (406mm) EMF Flake Ice Maker KBT5 Bin Top for 48” (1219mm) bins with (1) 30” (762mm) wide ICE Series Cube Ice Maker KBT14 Bin Top for 22” (559mm) bins with 16” (406mm) EMF Flake Ice Makers KBT9 Bin Top for 48” (1219mm) bins with (2) 16” (406mm) EMF Flake Ice Makers 24” (610mm) 24” (610mm) KBT19 Bin Top for 30” (762mm) bins with 22” (559mm) ICE Series Cube Ice Makers 23 1/2” (597mm) 22” (559mm) 48” (1219mm) KBT24 Bin Top for 22” (559mm) bins with (1) 21” (533mm) wide GEM Series Ice Maker KBT23 Bin Top for 48” (1219mm) bins with (1) 21” (533mm) wide GEM Series Ice Maker KBT22 Bin Top for 48” (1219mm) bins with (2) 21” (533mm) wide GEM Series Ice Makers 48” 30” (762mm) (1219mm) 22” (559mm) 48” (1219mm) 48” (1219mm) 23 1/2” (597mm) 23 1/2” (597mm) 23 1/2” (597mm) NOTES: Approx. Shipping Weight lbs (kg): B100 191 (86.64 kg) • B120 304 (137.89 kg) • B130 334 (151.5 kg) • B150 338 (153.31 kg) • B170 390 (176.9kg) • B25 95 (43.09 kg) • B40 135 (61.24 kg) B42 135 (61.24kg) • B55 170 (77.11kg) 11100 E. 45th Avenue Denver, CO 80239 Phone: 1. 866. PURE. ICE Fax: 303. 371.6296 www.iceomatic.com Rev: Part: A-02/09 3000 ICE1006/1005/1007 - Cube Ice Maker •Space saving 26" (660 mm) tall design. •Produces up to 1,097 lbs (498 kg) of ice per day. •Harvest Assist provides consistent ice production for the life of the ice maker while reducing energy consumption and increasing capacity. •Pure Ice® exclusively by Ice-O-Matic. Built-in antimicrobial protection for the life of the ice maker inhibits bacteria growth on ice maker surfaces. Ice-O-Matic's optional water filtration system provides protection against unpleasant tastes, odors and scale formation. •Durable, electroless nickel plating on all evaporator plates ensures reliability. •Longest warranty in the industry. Purchase an Ice-O-Matic water filter with your cube ice maker, replace the filter every six months, and the evaporator warranty is extended to 7 years parts and labor (available in the U.S. and Canada only). •Constructed from corrosion-resistant stainless steel and fingerprint-proof plastic. ICE1006 on B55 Options & Accessories Ice Maker Warranty Every Ice-O-Matic ice maker is backed by a warranty that provides both parts and labor coverage. •Three years Parts and Labor. •Five years Parts coverage on the evaporator and compressor. •Seven years Parts and Labor on the evaporator when you purchase an Ice-O-Matic water filter with your cube ice maker and replace the filter every six months (available in the U.S. and Canada only). Water Filters Manifold Ice Machine Model Inline System Replacement System ICE1006 IFQ2 IOMQ (2) N/A ICE1005 IFQ2 IOMQ (2) N/A ICE1007 IFQ2 IOMQ (2) N/A Ice Form Bin Chart Kits for Combining Wider Bins with Smaller Models Ice Storage Bins Model No. Full Cube W x D x H (in) 7/8 x 7/8 x 7/8 W x D x H (mm) 22 x 22 x 22 Half Cube W x D x H (in) 7/8 x 7/8 x 3/8 W x D x H (mm) 22 x 22 x 10 11100 E. 45th Avenue Denver, CO 80239 Kits CUBEd ICE B25 B40 B42 B55 B100 B120 B150 B170 255 lbs (116 kg) 30 in (762 mm). 365 lbs (165 kg) 30 in (762 mm) 374 lbs (170 kg) 22in (559 mm) 556 lbs (252 kg) 30 in (762 mm) 927 lbs (420 kg) 48 in (1219 mm) 1193 lbs (541 kg) 48 in (1219 mm) 1499 lbs (679 kg) 60 in (1524 mm) 1866 lbs (846 kg) 60 in (1524 mm) ICE1006 Kit not required Kit not required N/A Kit not required KBT 5 Filler Kit Required Filler Kit Required Filler Kit Required ICE1005 Kit not required Kit not required N/A Kit not required KBT 5 Filler Kit Required Filler Kit Required Filler Kit Required ICE1007 Kit not required Kit not required N/A Kit not required KBT 5 Filler Kit Required Filler Kit Required Filler Kit Required Capacity Width * See Ice-O-Matic Price List for Adapter Kits to combine ice makers with most available ice/beverage dispensers. Phone: 1. 866. PURE. ICE Fax: 303. 371. 6296 www.iceomatic.com Rev: Part: A-02/09 1011 ICE1006/1005/1007 Cube Ice Maker Features ICE1006/1005/1007 Cube Ice Maker Air Cooled Please note: air-cooled units require 6" (152 mm) clearance for air intake and exhaust. A.Ice maker potable water in, 3⁄8" FPT. B.Ice maker water out, 3⁄4" FPT. C.Hole for electrical connections, 7⁄8". D.Electrical connection junction box. C. A. D. 20.5" (521 mm) 17.7" (450 mm) Standard Side Discharge 22.2" (564 mm) Air In– Rear B. .62" (16mm) 26" (508 mm) 2.6"(67 mm) 5" (127mm) Bin Strap 24" (610mm) 5" (127mm) Bin Strap .7" (18 mm) 30" (762mm) Air Cooled Water Cooled/Remote I. A.Ice maker potable water in, 3⁄8" FPT. B.Ice maker water out, 3⁄4" FPT. C.Hole for electrical connections, 7⁄8". D.Electrical connection junction box. E.Condenser water in, 3⁄8" FPT (water only). F. Condenser water out, 1⁄2" FPT (water only). G.Liquid line, 3⁄8" male quick connect coupling for precharged line set (remote only). H.Discharge line, 1⁄2" male quick connect coupling for precharged line set (remote only). I. Hole for remote electrical connections, 7⁄8" (remote only). D. 20.5" (521 mm) 22.2" (564 mm) 17.7" (450 mm) 3.5" (89 mm) .62" (16mm) 50˚F (10˚C) 40˚F (4.4˚C) 20 PSIG (1.4 BAR) B. H. 2.6" (67 mm) 5" (127mm) Bin Strap 3.0" (76 mm) 5" (127mm) Bin Strap .7" (18 mm) Water Cooled & Remote Dimensions Maximum 60 Hz Ambient Temp. Range Air Water Temp. Water Pressure F. E. G. Operating Requirements Minimum C. A. All Models 50Hz W x D x H (inches) 100˚F (38˚C) 110˚F (43˚C) 100˚F (38˚C) 110˚F (43˚C) 60 PSIG (4.1 BAR) W x D x H (mm) 30 x 24 x 26 762 x 610 x 508 Specifications Ice Production per 24hrs Cond. Model No. Unit ICE1006A Air ICE1006R Remote* ICE1006W Water ICE1005A Air ICE1005R Remote* ICE1005W Water ICE1007A Air ICE1007R Remote* ICE1007W Water 70°F air/50°F water lbs (kg) 997 (453) 982 (446) 960 (436) 964 (438) 926 (421) 985 (448) 930 (423) 910 (413) 935 (425) 90°F air/70°F water lbs (kg) 780 (355) 843 (383) 856 (389) 766 (348) 778 (354) 871 (396) 754 (343) 781 (354) 836 (380) Water Usage (gallons per 100 kWH Used per lbs of Ice 90°F air/70°F water) 100 lbs of ice @ 90°F air/ Potable Condenser 70°F water 20.5 22.8 23.4 22.6 21.8 22.5 22.3 21.9 22.3 113 118 113 5.7 5.6 4.3 5.6 5.6 4.3 5.7 5.2 4.3 Voltage Characteristics 208-230/60/1 208-230/60/1 208-230/60/1 230/50/1 230/50/1 230/50/1 208-230/60/3 208-230/60/3 208-230/60/3 Min. Approx. Circuit Fuse BTUs Ampacity Size per hour 14.2 20 16,024 13.8 20 17,161 12.8 20 15,355 12.6 16 15,594 15.2 16 15,838 12.0 16 15,624 12.2 15 15,490 10.8 15 15,317 7.1 15 14,996 *Requires Remote VRC 2061 Condenser NOTES: Number of Wires: ICE1005/1006: 3 (including ground) • ICE1007: 4 (including ground) Approx. Shipping Weight lbs (kg): ICE1006A 230 (105) • ICE1006R 235 (107) • ICE1006W 225 (102) • ICE1005A 230 (105) • ICE1005R 235 (107) • ICE1005W 225 (102) • ICE1007A 230 (105) • ICE1007R 235 (107) • ICE1007W 225 (102) Refrigerant Type: R404A ENERGY STAR qualified machine. Please see our website www.iceomatic.com for the latest list of ENERGY STAR qualified machines and available rebates 11100 E. 45th Avenue Denver, CO 80239 Phone: 1. 866. PURE. ICE Fax: 303. 371. 6296 www.iceomatic.com Rev: Part: A-02/09 1011
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021