DMP XR500, XR100 security system User Guide

Below you will find brief information for security system XR500, security system XR100. These security systems can be used to protect your home or business from intruders. They can be easily programmed and allow you to check the status of your protection devices from the user menu. The systems also give you the option of setting up a schedule to arm and disarm the system automatically.

PDF Download
Document
DMP Security System XR500 and XR100 User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Easy programming
  • Automatic arming/disarming
  • Multiple arming options
  • Wireless key fob functionality
  • Central station monitoring
  • User menu allows for checking device status
  • Panic functions for emergencies
  • Area control for specific zones
  • Schedule creation for system operation
  • System test function

Frequently asked questions

You can arm and disarm the system using the keypad or a wireless key fob. To arm the system, enter your user code and select the appropriate arming option. To disarm the system, enter your user code and press the DISARM button.

The system offers various arming options, such as 'All/Perimeter,' 'Home/Sleep/Away,' and 'Home/Sleep/Away with Guest.' These options allow you to choose the appropriate level of protection for your needs.

The key fob is programmed with specific buttons that correspond to various functions, including arming and disarming. Consult the System Setup section for button programming details.

When an alarm occurs, the system sounds an alarm and sends a signal to the central station. You can then use the keypad to silence the alarm and send a verification message to the central station.

You can test the system using the System Test function in the User Menu.

You can set up schedules to automatically arm and disarm the system at specific times using the 'Schedules' function in the User Menu.

The User Menu is accessible through the keypad by pressing and holding the back arrow and command keys for two seconds, or by touching and holding the logo icon for two seconds on a Clear Touch keypad.
Preparing document for printing…
0%