Philips 64PP 9751 HDTV Monitor คู่มือผู้ใช้

Below you will find brief information for HDTV Monitor 64PP 9751. This Philips HDTV boasts a 64" widescreen display with a maximum resolution of 1920x1080i. Enjoy features like Dual Tuner PIP, APAC for preventing screen burn-in, and the Pronto programmable remote. The GUIDE Plus+ electronic program guide simplifies channel navigation.

PDF Download

Document

64” Digital WideScreen HDTV Monitor

9751

Your Television's

Directions for Use

• Maximum display resolution 1920x1080i

• Dual Tuner PIP

• APAC (automatic phosphor aging compensation)

• Display Format Conversion Modes

• PRONTO

Programmable Remote Control

• GUIDE Plus+

(electronic program guide)

Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to.

Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a

PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.

Warranty

Verification

Registering your product within

10 days confirms your right to maximum protection under the terms and conditions of your

PHILIPS warranty.

Owner

Confirmation

Your completed Warranty

Registration Card serves as verification of ownership in the event of product theft or loss.

Model

Registration

Returning your Warranty

Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.

Congratulations on your purchase, and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome–and thanks for investing in a PHILIPS product.

Sincerely,

Robert Minkhorst

President and Chief Executive Officer

P.S. Remember, to get the most from your PHILIPS product, you must return your

Warranty Registration Card within 10 days. So please mail it to us right now!

Know these safety symbols

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This “bolt of lightning” indicates uninsulated material within your unit which may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.

ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

INTERNET ADDRESS: http://www.philipsusa.com

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

Retain Instructions - The safety and operating instructions should be retained for future reference.

Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

Follow Instructions - All operating and use instructions should be followed.

Water and Moisture - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

6B. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

13. Power Lines - An outdoor antenna should be located away from power lines.

14. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Fig. below.

15. Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

16. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

17. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

The power supply cord or the plug has been damaged; or

Objects have fallen, or liquid has been spilled into the appliance; or

The appliance has been exposed to rain; or

The appliance does not appear to operate normally or exhibits a marked change in performance; or

The appliance has been dropped, or the enclosure damaged.

18. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Note to the CATV system installer: This reminder is provided to call the

CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

Example of Antenna Grounding as per NEC - National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

7 5

Getting Started

Welcome/Product Registration ...................2

Safety/Precautions .....................................................3

Table of Contents.......................................................4

Features, Model and Cabinet Information .................5

On-Screen Features

PICTURE MENU

✧Adjusting Color, Brightness, Sharpness,

Tint, Picture, and Color Temperature Controls ..6

✧Using Clearview and Video Enhance Controls...7

✧Adjusting the TV's Convergence Control ...........8

✧Using the Flesh Correction Control ....................9

FEATURES MENU

✧Using the Analog Format Screen Control.........10

✧Setting the TV for Closed Captioning...............11

✧Setting the TV for Cable or Antenna Signals....12

✧Adding Channels in Memory (Automatically) .13

✧Adding Channels in Memory (Manually) .........14

✧Setting the TV Clock.........................................15

✧Using the Sleep Timer Control .........................16

✧Adjusting the Channel Display Control............17

✧Using the Time/Channel Reminder Control......18

✧Using Parental Control/Content Advisory:

• Code Setup/Blocking Channels...............19-20

• Content Advisory - Movie Ratings .........21-22

• Parental Guidelines.......................................23

• Blocking Options/Review Settings...............24

✧Using the Channel Label Control......................25

✧Using the Language Selection Control..............26

SOUND MENU

✧Adjusting Bass, Treble, and Balance Sound

Controls.............................................................27

✧Setting the Bass Boost Control ........................27

✧Setting the TV for Stereo and SAP Programs ..28

✧Using the Incredible Surround Control.............29

✧Using the Volume Display Control...................29

✧Using the TV Speaker On/Off Control with the Audio Output jacks .....................................30

✧Surround Sound Speaker Connections and

Variable Audio Output Control ........................31

✧Optional Surround Sound Connections ............32

✧Using the TV's Audio/Video Input and

Output Jacks ...............................................33-37

ABLE OF

ONTENTS

BRIGHTNESS

PICTURE

SHARPNESS

SVM

COLOR

OFF

TINT

VOLUME BAR ON

Monitor (HD) Control Operation

Connection of VGA and High Definition (HD)

Component Video Equipment .................................38

Adjusting of Monitor Display Controls ...................39

Remote Control Operation

Setting the Auto Picture Control ..............40-41

Using the Auto Sound Control.................................42

Using the Auto Surf Control ....................................43

Picture-In-Picture (PIP)

How to Use PIP (Connections) .............44-45

How to Use PIP with the TV Remote......................46

Selecting the Picture Source for PIP........................47

Adjusting PIP Color, Tint, and Size ........................48

More PIP Connections (Cable Converter) ...............49

General Information

Tips if Something Isn’t Working ...............50

Glossary of TV Terms .............................................51

Index ........................................................................52

Warranty ..................................................................53

S ET UP AND Q UICK U SE G UIDE

Use the simple Set-Up Guide (supplied with your TV information packet) for details on:

• Antenna Hook-ups

• First Time Set-Up

(Automatic Settings)

• Basic TV and Remote

Control Operation

• On-Screen Menu Use

S ET -U P AND Q UICK U SE G UIDE

ABLE OF

ONTENTS

HD Widescreen Television

A NTENNA OR

C ABLE TV

ANT(ENNA) A & B INPUTS

Y our TV has two separate ANT(enna)/Cable

inputs on the rear of the set. These two signal inputs offer convenient hook-up options for both normal TV program viewing and Picture-In-Picture

(PIP) features.

The ANT(enna) A input is

intended for use and viewing on the TV’s main screen. Your home’s primary Antenna, or Cable

TV signal, should be connected to this input for normal TV setup, use and feature operation.

The ANT(enna) B input is

a second, or auxiliary signal source, designed to

Getting Started

Warning/Precautions ..................................1

Hooking Up Your TV ................................1

How to Use the First Time Set-Up Control ..............2

Basic TV and Remote Control Operation .................3

How to Use the On-Screen Menu Controls...............4

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNIT TO

RAIN OR EXCESSIVE MOISTURE.

BEGIN

A typical ANT(enna)

A and B connection (using a common signal source and an optional Signal Splitter):

If your Antenna or Cable TV signal has a round cable con-

nector (75 ohm) on the end, then you're ready to connect it to the 75ohm Signal Splitter.

If your antenna has flat twin-

lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter before connecting to the 75ohm Signal Splitter.

300 to 75 Ω Adapter

(483521827003)

Twin Lead

Wire

Connect your Antenna or

Cable TV signal to the single

75 ohm input plug on the twoway Signal Splitter (optional).

Then connect two lengths of RF

Coaxial Cable to the two Output plugs on the two-way Signal

Splitter (F-type connector on both ends).

Combination VHF/UHF Antenna

- Outdoor or Indoor Antenna receives normal broadcast channels

2-13 (VHF) and 14-69 (UHF).

Round Cable

Ω

Ohm

• For details on product registration, warranty,

and service refer to the other literature included with your TV information packet.

Please retain all these materials and keep them handy for future reference.

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service.

Connect the twin Output

plugs on the Signal Splitter to the ANT A and ANT B inputs on the rear of the TV. Push the round connector end of the RF

Coaxial Cable onto the

ANT(enna) plug and screw it down tight (if using threaded cables).

STOP

Back of TV

MART

H ELP

Remember, be sure to set the

TV for the type signal you've connected (see "SETUP" on page 2 of this

Guide.)

Your TV can set itself to select only the channel numbers on your Cable system (see “Setup" page 2). If you use a

Cable Converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the rear of the converter.)

To order any optional accessory contact your dealer or call the toll-free accessory ordering

First Time Set Up - automatically sets the TV for local channels, the correct picture signal (antenna or cable), and assists in the setting of TV’s Guide Plus+ feature.

Pronto Remote Control - universal, learn remote which controls virtually all IR devices, learns new commands, and can be customized for personal preferences. Features a large LCD backlit touchscreen.

Standard TV broadcast (VHF/UHF) or Cable TV

(CATV) channel capability as well as advanced connectivity for high definition video and VGA.

Closed Captioning - allows the viewer to read TV program dialogue or voice conversations as on-screen text.

Automatic Programming of channels - for quick and easy selection of favorite stations available in your area.

Picture-In-Picture (PIP) - can show a TV program and the direct video output from an accessory (VCR, etc.) onto the TV screen at the same time.

Parental Control for “Censoring” - this feature can block out channels to keep children from watching undesirable programming. Parental Guideline and

Movie Rating settings can also be used as part of the new Content Advisory Data system available with TV programming.

Stereo TV - with a built-in audio amplifier and a twin speaker system, reception of TV programs in both broadcast stereo sound or (SAP) bilingual broadcast are available.

Twin Antenna (A/B) Inputs - for easy displaying of two separate signal sources on the TV. An A/B button on the remote control switches the TV’s Main screen between the two Antenna (A & B) Input options.

Audio/Video Jacks - for direct connections with

VCRs (and other accessories) for quality TV picture and sound playback.Component Video Input connectors are also available for high fidelity color and picture resolution when using digital video source material, such as DVD.

Surround Sound - this TV set contains external; audio speaker connections for a more dynamic sound effect capable within the today’s Home Cinema environment.

Sleep-Timer - automatically turns the TV OFF at preset time intervals.

Auto Button - for the control of TV Sound and

Picture levels. Use the Auto Button on the remote to quickly select various audio modes matched to specific types of TV programming; to select video level adjustments for a variety of program sources; and to make quick one button channel selection of up to 10 of your favorite channels.

EATURES

High Definition Digital - Projection Television capable of 1920 x 1080i interlaced imaging for superior resolution and performance. Line doubling circuitry and video processing technology able to output progressive scan material with clean, stable widescreen images. PixelMax optimum triple lens system matched to first surface mirror and fine pitched lenticular screen methods which amounts to an incredible 1,620,000 pixels of display capability.

High Definition Component and RGB Inputs are available as well for Y, Pb, Pr; horizontal/vertical sync, and RGB/VGA monitor input operation modes.

Automatic Phosphor Aging Compensation (APAC)

- Automatic incremental shifting of TV screen elements to prevent any onscreen image outline retention or “screen burn” problems.

GUIDE Plus+ ® - Electronic TV Program guide which provides for daily television channel listings, descriptions of program content, sorting of shows by subject themes, and a variety of other VCR programming options. (See your separate GUIDE

Plus+ ® Owner’s Manual for further details.)

Because of continuous product improvements, the information mentioned in the documents accompanying your product are subject to change without notice.

As you unpack your TV please note that the following items have been included with your set:

• Owner's Manual

Safety Tip Information

Factory Service Center Locations

• Warranty Registration Card

• Remote Control Transmitter

• Batteries for Remote Control Use

Refer to the back of this manual for instructions on the cleaning and care of the TV.

End-of-Life disposal

Your new projection television and its packaging contain materials that can be recycled and reused.

Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts which need to be properly disposed.

Your product also uses batteries which should not be thrown away when depleted, but should be handed in and disposed of as small chemical waste.

Please find out about the local regulations on how to dispose of your old television, batteries, and packaging materials whenever you replace existing equipment.

P ICTURE M ENU C ONTROL A DJUSTMENTS

COLOR, BRIGHTNESS,

SHARPNESS, TINT, PICTURE o adjust your TV color and T picture controls, select a TV channel and follow the steps shown below:

1 Select BRIGHTNESS,

PICTURE, COLOR, TINT, or

SHARPNESS picture control.

With the PICTURE MENU (1 of

3) onscreen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the § or © arrow buttons to adjust the selected control.

3 Press the Exit button to clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

PICTURE MENU

COLOR

BRIGHT

SHARP

EXIT

MART

ELP

Remember. When the bar scale is centered, control settings are at normal mid-range levels.

BRIGHTNESS Press (-) or (+) until dark parts of the picture show good detail.

PICTURE Press (-) or (+) until whitest parts of the picture are as bright as you prefer.

COLOR Press (-) or (+) to add or eliminate color.

TINT Press (-) or (+) to obtain natural skin tones. (Also see Flesh

Correction on page 9 for more information).

SHARPNESS Press (-) or (+) to improve detail in the picture.

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

MIN

EXIT

COLOR

Note: A Color

Temperature control is also available to set the level or degree of color intensity (especially on white picture screen elements). For example, use the Color

PICTURE MENU

COLOR TEMPERATURE

EXIT

Temperature (Picture Menu 3 of 3) for the following settings:

COOL – makes whites, bluish

NORMAL – keeps whites, white.

WARM – makes whites, reddish.

3 OF 3

COOL

EXIT

NORMAL

WARM

TINT

PICTURE

CLEARVIEW

MORE...

1 OF 3

MAX

NEXT...

Select and then press MENU

(or ok) button to view additional controls grouped under same feature heading.

For Example: Tint,

Brightness, Picture, etc.

P ICTURE M ENU C ONTROLS ( CONTINUED )

CLEARVIEW

C learview is a sharpness feature which smoothes out background snow (or picture noise) without losing picture image detail or crispness.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND 1 Select CLEARVIEW control.

With the PICTURE MENU (1 of 3) onscreen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ buttons to move the RED highlight. Press the center MENU button to select (

U) the ENHANCED mode.

Press the Exit button to clear the screen.

EXIT

Menu ok mute

HDR PTV channel

Source volume

3/5

Exit

INFO A/CH

PICTURE MENU

COLOR

BRIGHT

SHARP

EXIT

CLEARVIEW

NORMAL

ENHANCED

EXIT

TINT

PICTURE

CLEARVIEW

MORE...

1 OF 3

NEXT...

Note: An additional

Picture Menu

“VIDEO

ENHANCEMENT” control (similar in function and use as the Sharpness control) is also available to

PICTURE MENU

CONVERGENCE

FLESH CORRECTION

VIDEO ENHANCEMENT

EXIT MORE...

2 OF 3 further improve picture intensity and detail, particularly for the playback of

DVD player source material.

Selection and adjustment of the

MIN

EXIT

VIDEO ENHANCEMENT

MAX

Video Enhancement control (Picture

Menu 2 of 3) is the same as with other Color and Picture Menu control options.

P ICTURE M ENU C ONTROLS ( CONTINUED )

RED/BLUE CONVERGENCE

C onvergence is the correct lining up of the red and blue light paths on the TV screen.

NOTE: If no color fringing (see

Smart Help) shows, then no

Convergence adjustments are necessary for your TV.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

PICTURE MENU

COLOR

BRIGHT

SHARP

EXIT 1 Select CONVERGENCE control.

With the PICTURE MENU (2 of

3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 If there is RED or BLUE color fringing (see note below) on your

PTV, press the MENU ▲▼ buttons to move the highlight.

Press the MENU (or ok) button to select the Align Red or Align Blue

Convergence control.

Press the MENU buttons to move the red or blue cross directly over the white cross on the

TV screen.

The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).

Press the Exit button to clear the screen when convergence adjustments are complete.

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

TINT

PICTURE

CLEARVIEW

MORE...

1 OF 3

PICTURE MENU

CONVERGENCE

FLESH CORRECTION

VIDEO ENHANCEMENT

EXIT MORE...

2 OF 3

CONVERGENCE MENU

ALIGN RED

ALIGN BLUE

CONVERGE MULTI POINT

BACK

PRESS TO ALIGN RED

PRESS MENU TO RETURN

MART

ELP

Remember. Convergence has been set at the factory for best viewing, but if one or more of the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.

NOTE: Adjustments for

“Multi-Point” on-screen color fringing can also be made as part of the TV’s Convergence control system. Follow the TV’s on-screen menu directions to

CONVERGENCE MULTI POINT

CONVERGE RED POINTS

CONVERGE BLUE POINTS

RESTORE FACTORY SETTINGS

SAVE ADJUSTMENTS

BACK

CONVERGE RED POINTS select individual screen areas that can be readjusted and set for varying red/blue color fringing conditions.

USE TO ADJUST

DIGIT 2, 4, 6, 8 TO MOVE CURSOR

PRESS MENU TO RETURN

PRESS MENU NOW TO CONTINUE

These multi-point settings can then be

“Saved” to memory for the specific areas of the TV screen (or Factory Settings for convergence can be recalled and put back into place for use).

MULTI-POINT

CONVERGENCE

ICTURE

ENU

ONTROLS

(

CONTINUED

)

FLESH CORRECTION

U se the Flesh Correction control to keep skin tone hues

(or facial tint) from varying from

TV channel to TV channel.

1 Select FLESH

CORRECTION control.

With the PICTURE MENU (2 of

3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ buttons to move the RED highlight. Press the MENU (or ok) button to turn

(

U) the FLESH CORRECTION control ON.

Press the Exit button to clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

PICTURE MENU

COLOR

BRIGHT

SHARP

EXIT

TINT

PICTURE

CLEARVIEW

MORE...

1 OF 3

PICTURE MENU

CONVERGENCE

FLESH CORRECTION

VIDEO ENHANCEMENT

EXIT MORE...

2 OF 3

FLESH CORRECTION

OFF

EXIT

EATURE

ENU

ONTROL

DJUSTMENTS

ANALOG FORMAT

Y our TV is able to deliver lifelike, widescreen picture (or

“home cinema” experience) that is promised with High Definition TV viewing. The Analog Format control can be used to expand conventional 4:3 aspect ratio

(width-to-height) broadcasts in order to fit your TV’s widescreen format; or to reset the screen to best match the current programming.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

1 Select ANALOG FORMAT control.

With the FEATURES MENU (1 of

5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

Press the MENU ▲▼ buttons to move the RED highlight. Press the MENU (or ok) button to select

(

U) the desired screen aspect ratio or screen display control.

Press the Exit button to clear the screen.

MART

ELP

Note: In the past the relationship between a TV screen’s width to height, or aspect ratio, has historically been 33% wider than the picture screen height (or a 4:3 aspect ratio). The widescreen format of your TV screen is nearly 80% greater than its measure height (which accounts for a 16:9 aspect ratio).

The reason for the 16:9 aspect ratio screen is that it allows for the dramatic and lifelike viewing of original version movies and cinemas (similar to the type found in your local theaters). And the

16:9 aspect ratio widescreen is also a good visual match for how our eyes work in a horizontally oriented field of view and action plane.

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

2 mute channel

HDR PTV

Power

Auto

Sleep

Status

Analog Format volume

1/5 INFO A/CH

Note: The Analog Format button on the Pronto Remote

(touchscreen 1 of 5) can also be used to quickly select the various aspect ratio screen control settings for PTV viewing.

Panoramic - Conventional picture is expanded to fill the full 16:9 aspect ratio screen area. Most of the non-linear picture expansion is performed toward the outer edges so that correct proportions are retained in the center of the screen.

4:3 (Standard) -

Conventional TV picture format shows on the screen.

Black bar areas show on the side margins of the screen.

16:9 (Expand) - Full widescreen mode with linear expansion to view HD program broadcasts. Used for material originally produced in

16:9 format.

Theater 1/2 - Expanded zoom modes with picture images increased in magnification.

Designed for use with

“letterbox” or cropped movie images such as found with

Cinemascope or Cinerama type program material.

Note: With the Theater modes there can be some loss of information at the edges as the picture expands to fill the screen.

ANALOG FORMAT

PANORAMIC

4 X 3

16 X 9

THEATER 1

THEATER 2

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

PANORAMIC

Building Trade News

4 X 3

Building Trade News

16 X 9

Building Trade News

THEATER 1/2

Building Trade News

F EATURE M ENU C ONTROLS ( CONTINUED )

CLOSED CAPTION

C losed Captioning (CC) allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen

"text boxes" to show dialogue and conversations while the TV program is in progress.

NOTE: Not all TV programs and product commercials are made for broadcast with Closed Caption (CC) information included. Neither are all Closed Caption modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by a broadcast station during the transmission of a closed caption program. Usually "CAPTION 1" is the most used mode to view captioned material. Refer to your area's TV program listings for the stations and times of Closed Caption shows.

1 Select CLOSED

CAPTIONING control.

With the FEATURES MENU (1 of

5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ buttons to move the RED highlight. Press the

MENU (or ok) button to select (

U) the desired Closed Caption mode -

For Example: "ALWAYS ON" and

"CAPTION 1".

CAPTION 1, 2, 3, 4: dialogue (and descriptions) for the action on the captioned

TV program shows on-screen.

(See Important Note on this page.)

TEXT 1, 2, 3, 4: often used for channel guide, schedules, or bulletin board information for CC programs.

3 After making your Caption mode selection, press the Exit button to clear the TV screen. The selected

Closed Caption mode will be active.

To cancel, set the Closed Captioned feature to OFF when finished.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

NOTE: The ON DURING

MUTE ONLY control can be used to set the TV to turn the

Closed Caption mode "ON" whenever the MUTE button on the remote is pressed.

CLOSED CAPTION

ALWAYS ON

ALWAYS OFF

ON DURING MUTE ONLY

CAPTION 1

CAPTION 2

CAPTION 3

CAPTION 4

TEXT 1

TEXT 2

TEXT 3

TEXT 4

EXIT

JOHN: Why did they move the meeting up to this week?

MARSHA: I don't know, but they are pushing to close the deal.

CAPTION 1 mode

Example Screen Display

MART

ELP

Remember. Broadcast stations will often use spelling abbreviations, symbols, dropouts and other grammatical shortcuts in order to keep pace with the on-screen action. These type factors vary upon the source of the captioned text material and do not indicate a need for service on the part of the TV.

Closed Caption information will usually appear in black and white (although some broadcasters or networks may occasionally use color to highlight or draw attention to certain areas.)

CLOSE CAPTION PROGRAMS ON WXYZ

ALL ITEMS ARE EASTERN STANDARD TIME (EST)

CHECK LOCAL LISTINGS

FOR TIMES IN YOUR AREA

6:00 TOP OF THE MORNING

10:00 THE BEST LITTLE CALL-IN SHOW EVER

12:00 NOONDAY NEWS

1:30 AS YOUR LIFE TURNS MY WORLD AROUND

6:00 WORLD NEWS FOR TODAY

9:00 PLAYHOUSE MOVIE OF THE WEEK

FULL SCREEN TEXT will block TV screen from viewing

F EATURE M ENU C ONTROLS ( CONTINUED )

CABLE TUNING

Y ou need to make sure the TV is set to pick up either Cable TV or Antenna signals. In other words, the TV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA plug.

NOTE: If you went through First

Time Setup (in your Quick Use

Guide), this task has already been completed for you.

Select CABLE CHANNEL

TUNING control.

With the FEATURES MENU (1 of

5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ buttons to move the RED highlight. Press the center MENU button to select

(

U) the desired mode - For

Example: CABLE.

CABLEIf you DO have

Cable TV connected to the TV. Channels

1-125 available.

NORMAL- If you have an

Antenna connected to the TV. Channels

2-69 available.

3 Press the Exit button to clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

CABLE TUNING

CABLE ANT A

NORMAL ANT A

CABLE ANT B

NORMAL ANT B

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

Note: Both ANT(enna) A and ANT B inputs on the rear of the TV can be set for the correct connected signal (either an Antenna or Cable

TV source).

F EATURE M ENU C ONTROLS ( CONTINUED )

CHANNEL MEMORY

AUTO-PROGRAMMING

Y our TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your

area when the CHANNEL ▲▼ buttons are pressed.

NOTE: If you went through First

Time Setup (in your Quick Use

Guide), this task has already been completed for you.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

1 Select CHANNEL MEMORY

(START AUTO-PROGRAMMING) control.

With the FEATURES MENU (1 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ buttons to select AUTO-PROGRAMMING ON, then press the Menu (or ok) button to begin.

The TV shows which channel numbers are "SAVED" (

U) as they are added into memory.

"Auto-programming CHANNEL

MEMORY is finished" shows when the TV is through adding channels.

3 Press the Exit button to clear the screen.

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

U Channel Numbers are

Saved in Memory

EXIT

CHANNEL MEMORY

ADD/DELETE

CHANNELS

START

AUTO-PROGRAMMING

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

AUTO-PROGRAMMING CHANNEL

MEMORY FOR ANT A

1 2 3 4

5 6 7 8

9 1O 11 12

13 14 15 16

17 18 19 20

21 22 23 24

Press "M" to

Stop Auto-Program

MART

ELP

Try it out. Press the

CHANNEL▲▼ buttons and see which channels you can select.

Remember, an Antenna or Cable

TV signal must first be connected to your PTV so that channels can be saved.

If you want to delete any unwanted channels from the TV's memory, see "ADD/DELETE

CHANNELS" on the next page.

F EATURE M ENU C ONTROLS ( CONTINUED )

ADD/DELETE CHANNELS

A uto-Programming (see previous page) adds all the channels it can find (on your

Antenna or Cable TV system) into the TV's memory. Add/Delete

Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory.

1 Select CHANNEL MEMORY

(ADD/DELETE CHANNELS) control.

With the FEATURES MENU (1 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the CHANNEL (+)/(-)

(or number buttons on the Pronto’s touchscreen 2 of 5) to select the channel you want to add or delete.

3 Press the MENU © button to

ADD the channel into the TV's memory.

Press the MENU § button to

DELETE the channel from memory.

Repeat steps 2 and 3 for each channel you wish to add or delete.

4 Press the Exit button to clear the screen when through.

MART

ELP

Remember. A separate

ADD/DELETE CHANNEL memory may also be created for the ANT(enna) B Input on the rear of the set (if an Antenna or Cable

TV signal has been connected).

Press the “SOURCE” button on the remote, while in the

ADD/DELETE CHANNEL mode, to switch between the ANT

A and ANT B channel memory lists. Then follow steps 2 and 3 as shown above to add or delete the desired channels.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

CHANNEL MEMORY

ADD/DELETE

CHANNELS

START

AUTO-PROGRAMMING

EXIT

ADD/DELETE CHANNEL

SOURCE

Channel 19 Added

for ANT A

SELECT CHANNEL to DELETE CHANNEL for ANT B when FINISHED

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

F EATURE M ENU C ONTROLS ( CONTINUED )

SET CLOCK

Y our TV comes with an onscreen clock. During normal operation the clock appears on the screen with every channel change

(and when the STATUS button is pressed).

1 Select SET CLOCK control.

With the FEATURES MENU (2 of

5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the remote's number

buttons (on the Pronto’s touchscreen 2 of 5) to set the time clock.

3 Press the Exit button to set the clock in operation and clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu mute

HDR PTV channel 1

Source volume

3/5

Exit

INFO ok

A/CH

HDR PTV

Status

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

MART

ELP

Remember, be sure to press "0" first and then the hour number for single digit entries.

The remote's MENU buttons can also be used to set the hours, minutes and AM/PM portions of the clock.

PTV Clock settings may be lost when the TV is unplugged (or AC power to the set is interrupted).

2/5

+100

INFO

Surf

A/CH

SET CLOCK

9 : 19 AM

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

PLEASE ENTER THE

CURRENT HOUR

EATURE

ENU

ONTROLS

(

CONTINUED

)

SLEEP TIMER

H ave you ever fallen asleep in front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off.

Press the SLEEP button on the

Pronto remote control (touchscreen

1 of 5).

2 Press the Sleep button repeatedly to pick the amount of time (15 minutes to 2 hours ahead) before the PTV will turn itself off.

3 Press the Status (or Exit) button to clear the screen after you have set the time for the TV to turn off.

SET SLEEP TIMER

1 : 15

PRESS "SLEEP" TO CHANGE

1/5

HDR PTV

Power

Auto

Sleep

Status mute channel

3 volume

Analog Format

INFO A/CH

MART

ELP

Remember, to see how many minutes are left before the TV shuts itself off, reselect the

SLEEP TIMER control screen.

To stop a SLEEP TIMER setting, reset the timer back to OFF.

(Turning the PTV off and on, or pressing a button during the last minute of a timer setting, will also cancel a setting.)

A few seconds before the TV is to shut off a message will come on the screen telling you GOOD NIGHT.

EATURE

ENU

ONTROLS

(

CONTINUED

)

CHANNEL DISPLAY

W ith the Channel Display control you can change the size and location of the on screen channel and clock information.

Select CHANNEL DISPLAY control.

With the FEATURES MENU (2 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the

LARGE or SMALL display control.

3 Press the Exit button to clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

MART

ELP

Try it out. Press the

CHANNEL ▲▼ buttons and you should see the Display

Size you selected.

Remember. The SMALL SIZE display shows only the channel number, not the time (or clock).

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTION

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

CHANNEL DISPLAY

LARGE

SMALL - Channel/Label

EXIT

EATURE

ENU

ONTROLS

(

CONTINUED

)

HALF HOUR REMINDER

W ith the Half Hour Reminder control the TV automatically shows you the current time and channel every thirty minutes.

1 Select HALF HOUR

REMINDER control.

With the FEATURES MENU (2 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the

EVERY HALF HOUR item.

Press the Exit button to clear the screen.

MART

ELP

Remember. The Time and Channel Reminders will show on the hour and the halfhour for about five seconds.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

HALF HOUR REMINDER

OFF

EVERY HALF HOUR

EXIT

EATURE

ENU

ONTROLS

(

CONTINUED

)

PARENTAL CONTROL

SETUP CODE NUMBER

P arental Control allows parents to block out, or "censor", any channels they think children should not watch. A channel placed under

Parental Control cannot be viewed until a correct access code is used to unlock the channel for viewing.

First let's set your Parental Code:

NOTE:Your TV left the factory with the Parental Code set to "0000". If you are using your TV and the Parental Control for the first time, and don't want to SETUP a new

Access code number, you can use the "0000" number to block channels - see next page.

The "0711" Parental Code (shown on this page) is given as a default or way to reset the

Code when the current Access number is not known.

1 Select the PARENTAL

CONTROL.

With the FEATURES MENU (3 of

5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

"CHANNEL BLOCKING" and

"SETUP CODE" show on screen.

Press the MENU and MENU

(or ok) buttons to highlight and select the SETUP CODE item.

3 Press 0, 7, 1, 1 on the remote

(touchscreen 2 of 5).

"XXXX" shows on the ACCESS

CODE SETUP screen as you press the number buttons.

"INCORRECT ACCESS CODE -

TRY AGAIN" will also show on the screen.

4 Press 0, 7, 1, 1 on the remote again.

"Next Enter Your New Access

Code" shows on the screen.

5 Enter a new four digit number code using the remote.

" Access Code Changed" shows on the screen to let you know the new code has been set.

Continue to the next page to find out how to "BLOCK" channels from viewing.

MART

ELP

Parents - it isn't possible to unlock or defeat your

Censor Code without changing to a new code number. So if your

Code number changes, and you didn't change it yourself, then you will know that someone has altered the code and the blanked out channel has been viewed.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu

DN HDR PTV mute

1 channel

Source volume ok

3/5

Exit

INFO

A/CH

+100

2/5

INFO

HDR PTV

Status

Surf

A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

ACCESS CODE SETUP

X X X X

First Enter Your

Current Access Code.

M to EXIT

ACCESS CODE SETUP

X X X X

Next Enter Your New

Access Code.

M to EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

PARENTAL CONTROL

CONTENT

ADVISORY

SETUP

CODE

CHANNEL

BLOCKING

EXIT

ACCESS CODE SETUP

X X X X

INCORRECT ACCESS CODE

TRY AGAIN. If You've

Forgotten Your Access

Code go to SETUP CODE and see Owner's Manual.

M to EXIT

ACCESS CODE SETUP

X X X X

Access Code Changed.

for CHANNEL BLOCKING for CONTENT ADVISORY

M to EXIT

• Press MENU

"block" channels.

• Press MENU

button (on to go to

"Content Advisory" (or TV and

Movie Ratings system of channel blocking).

• Press the MENU (or ok) button to return to the Parental Control Menu screen.

• Press Exit to clear the screen.

F EATURE M ENU C ONTROLS ( CONTINUED )

PARENTAL CONTROL

CHANNEL BLOCKING

A fter your personal Parental

Code number has been set (see previous page), you are now ready to select the channels you want to block out or censor.

1 Select the BLOCK

CHANNELS control.

With the FEATURES MENU (3 of

5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU and

MENU (or ok) buttons to highlight and select the

CHANNEL BLOCKING item.

Enter the correct Parental

Code number.

4 Press Channel ▲▼ or Channel

Number buttons to select the channel you want to block.

5 Press the MENU © button to

"BLOCK VIEWING" on the selected channel.

Press the MENU § button to

"ALLOW VIEWING" on a blocked channel.

Repeat steps 3 and 4 for any other channels you wish to block out.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu

HDR PTV mute

1 channel

Source volume ok

3/5

Exit

INFO

A/CH

HDR PTV

Status

+100

2/5

PIP

INFO

Surf

A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

CHANNEL BLOCKING MEMORY

X X X X

To Block or Un-Block channels First Enter your Access Code.

M to EXIT

EXIT

PARENTAL CONTROL

CONTENT

ADVISORY

SETUP

CODE

CHANNEL

BLOCKING

CHANNEL BLOCKING MEMORY

Channel 19 blocked

CHOOSE CHANNEL to ALLOW VIEWING to EXIT

CHANNEL 19

CHANNEL BLOCKING ACTIVE

X X X X

Please enter Access Code

-OR-

Select another Channel

for viewing.

MART

ELP

Remember, once set

Parental Control blocks out the selected channel number on both the ANT A and ANT B channel rings. Also, to make TV viewing easier all channels (for both ANT A/B) will be unblocked, once the correct

Parental Code number has been entered.

When the TV is turned OFF and then back ON again, is when

Parental Control is back in place for all blocked out channels.

BLOCKED CHANNEL SCREEN MESSAGE

(Appears when an attempt to select a blocked channel is made and Parental Control is ON.)

EATURE

ENU

ONTROLS

(

CONTINUED

)

PARENTAL CONTROL

CONTENT ADVISORY

A nother new area available to parents for the censoring of program material is through the

TV Guidelines and Movie Ratings system. Program Content Advisory data will soon be contained within the broadcast signals of received

TV programs. When setup by the parent or viewer, the TV can respond to transmitted advisory data by blocking out or denying access to TV shows (based on whether the program meets or exceeds the limitations you select as viewable). The TV program can then only be viewed by entering the correct and current Parental Code

Access number.

The Content Advisory system uses both “Movie Ratings” and a

“Parental Guidelines” form of censoring. Refer to the following page sections for explanations on the different Rating system levels and their uses.

1 Select the CONTENT

ADVISORY Menu option

With PARENTAL CONTROL

Menu on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

A Parental Guideline/Movie Rating status screen will appear with a review of currently BLOCKED

Content Advisory categories.

2 Press the outer MENU ©

button to select the ENTER

ACCESS CODE Menu item.

Note: Please remember that a valid and current Access Code number will be required in the setup and use of the TV’s “Content Advisory” system. Review the previous SETUP CODE section on how to obtain a valid Parental Access Code number before attempting to make adjustments within the Movie Ratings and

Parental Guidelines system.

PARENTAL CONTROL

CONTENT

ADVISORY

SETUP

CODE

CHANNEL

BLOCKING

EXIT

1 DN

Menu

3/5

Exit

INFO ok

HDR PTV mute

1 channel

Source volume

A/CH

+100

2/5

INFO

HDR PTV

Status

Surf

A/CH

CONTENT ADVISORY DISABLED

TV PARENTAL

GUIDELINES

BLOCKED

TV-Y

TV-Y7 FV

TV-G

TV-PG DLSV

TV-14 DLSV

TV-MA LSV

MOVIE

RATINGS

BLOCKED

PG-13

NC-17

X to ENTER ACCESS CODE

M to EXIT

CONTENT ADVISORY ACCESS

X X X X

To Block or Un-Block

Programs, First Enter your Access Code.

M to EXIT

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

REVIEW

SETTINGS

EXIT

BLOCKING

OPTIONS

3 Enter the correct Parental

Code number on the remote

(touchscreen 2 of 5). Also, see the note at the top of this page).

“CONTENT ADVISORY” Menu screen appears. Parental

Guidelines, Movie Ratings and other blocking control items are ready for selection and use.

CHANNEL 8

BLOCKED BY CONTENT ADVISORY

TV GUIDELINES TV-14 D

X X X X

Please enter Access Code

-OR-

Select another Channel

for viewing.

NOTE: In normal Content Advisory system operation the TV screen will display a message when programming is blocked by a Movie Rating, Parental

Guideline, or Blocking Option control feature.

Entering the correct ACCESS CODE number will unblock all the blocked Content Advisory Rated channels until the TV is turned Off. The blocked

Advisory Ratings will be back in place when the TV is turned back On again.

EATURE

ENU

ONTROLS

(

CONTINUED

)

CONTENT ADVISORY

MOVIE RATINGS

M ovie Ratings set viewing access levels for TV programming according to current

Motion Picture Association of

America (MPAA) ratings. These ratings are similar to the categories used with the rated movies appearing in cinema theaters and with video rental material.

1 Select the MOVIE RATINGS

Menu option.

With CONTENT ADVISORY

Menu on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the desired MOVIE BLOCKING level.

When in operation a “Blocked -

Movie Rating” TV screen appears when movies are received which include the same selected rating as the Movie Blocking setting(s).

Only the correct Access Code number, entered by the viewer, will unblock or allow the viewing of a block rated program.

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

REVIEW

SETTINGS

BLOCKING

OPTIONS

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

MOVIE BLOCKING

PG-13

NC-17

EXIT

• G - General Audience: Most parents would find this program suitable for all ages. This type of programming contains little or no violence, no strong language, and little or no sexual dialogue or situations.

• PG - Parental Guidance: This programming contains material that parents may find unsuitable for younger children. It may contain one or more of the following:

Moderate violence, some sexual situations, infrequent coarse language, or some suggestive dialogue.

• PG-13: This programming contains material that parents may find unsuitable for children under the age of 13. It contains one or more of the following: violence, sexual situations, coarse language, or suggestive dialogue.

• R - Restricted: This programming is specifically designed for adults. Anyone under the age of 17 should only view this programming with an accompanying parent or adult guardian. It contains one or more of the following: intense violence, intense sexual situations, strong coarse language, or intensely suggestive dialogue.

• NC-17 - No one under 17 admitted: This type of programming should be viewed by adults only. It contains graphic violence, explicit sex, or crude indecent language.

• X - Mature audience only: This type of programming contains one or more of the following: very graphic violence, very graphic and explicit or indecent sexual acts, very coarse and intensely suggestive language.

MART

ELP

Note: When a Movie

Rating is selected (

U) all higher level ratings are automatically blocked (although each individual Movie Rating can be manually selected and turned

On or Off as desired). Programs with lower than the selected rating level are allowed for viewing or unblocked.

F EATURE M ENU C ONTROLS ( CONTINUED )

CONTENT ADVISORY

PARENTAL GUIDELINES

P arental Guidelines can be even more defined and specific in the degree and extent of material parents may allow for TV program viewing. Sub-settings for

Language, Violence, and other blocking factors can be manually switched On or Off for use within the major Parental Guideline categories (TV-Y7, TV-PG, etc.).

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

REVIEW

SETTINGS

BLOCKING

OPTIONS

EXIT

PARENTAL GUIDELINES

To Select Rating

TV TV TV TV

Y7 G PG 14

To Select Blocking

NOT BLOCKED

ALWAYS BLOCKED

(FV) FANTASY VIOLENCE

1 Select the PARENTAL

GUIDELINES Menu option.

With CONTENT ADVISORY

Menu on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU § © (Left

and Right) buttons to highlight and select the desired PARENTAL

GUIDELINE rating level (TV-Y,

TV-Y7, etc.).

Press the MENU ▲▼ and

MENU (or ok) buttons to Block

(

U) the selected Parental

Guideline category (or to set other individual blocking feature items available within that Guideline category (L, V. S, D, etc.) as desired).

Note: Selecting “ALWAYS

BLOCKED” (or individually adjusting the L, V, S, D settings) for any one rating will set all other higher level ratings to be automatically blocked as well.

MART

ELP

The TV-Y7; TV-PG;

TV-14; and TV-MA guidelines also include customized settings for various additional items such as V

(violence), S (sexual situations), L

(coarse language), D (suggestive dialogue), and FV (fantasy violence). These additional settings are category specific and can be individually selected for use as desired.

1 DN

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

EXIT HELP

PARENTAL GUIDELINES

To Select Rating

TV TV TV

Y7 G PG

To Select Blocking

NOT BLOCKED

ALWAYS BLOCKED

(L) LANGUAGE

(V) VIOLENCE

(S) SEXUAL CONTENT

(D) SUGGESTIVE DIALOG

EXIT

• TV-Y - Appropriate for all children: Designed for a very young audience, including children ages 2-6. This type of programming is not expected to frighten younger children.

• TV-Y7 -Appropriate for children seven and older: It may be more appropriate for children who have acquired the development skills needed to distinguish between make-believe and reality. This programming may include mild fantasy and comic violence (FV).

• TV-G - General Audience: This type of programming contains little or no violence, no strong language, and little or no sexual dialogue or situations.

• TV-PG - Parental Guidance suggested: This type of programming contains one or more of the following: Moderate violence (V), some sexual situations (S), infrequent coarse language (L), or some suggestive dialogue (D).

• TV-14 - Unsuitable for children under 14: This type of programming contains one or more of the following: intense violence (V), intense sexual situations (S), strong coarse language (L), or intensely suggestive dialogue (D).

• TV-MA - Mature audience only: This type of programming contains one or more of the following: graphic violence (V), explicit sexual situations (S), or crude indecent language (L).

• (V) - Violence

• (S) - Sexual situations

• (L) - Language

• (D) - Inappropriate dialogue

• (FV) - Fantasy Violence may frighten children under seven. Some cartoons may have this rating. Available in the TV-Y7 category only.

EATURE

ENU

ONTROLS

(

CONTINUED

)

CONTENT ADVISORY

BLOCKING OPTIONS

T he Content Advisory system also has “Blocking

Option”controls which can be used to deny viewing access for channel programs and movies even when they are “unrated”, or contain “no rating” information as broadcasted.

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

REVIEW

SETTINGS

BLOCKING

OPTIONS

EXIT

BLOCKING OPTIONS

Blocking System:

DISABLED

ENABLED

Set To Block On:

CHANNEL CHANGE

UNRATED PROGRAMMING

NO RATING INFORMATION

EXIT

1 Select the BLOCKING

OPTIONS Menu control.

With CONTENT ADVISORY

Menu on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

Press the MENU ▲▼ and

MENU (or ok) buttons to turn the

Blocking System On (highlight and select

U ENABLED). Then use the remote Menu buttons to select the desired programming and information blocking options.

Please refer to Note shown with this page section for details on

“unrated” and “no rating” program control options.

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

Note: Remember that Content Advisory data or encoded information is not available with all received TV programming (this also includes commercials, and other program spot announcements). Broadcaster’s can decide

not to encode any kind of content advisory ratings with their programming, or they can actually choose to encode

programs to be “unrated.”

The TV Blocking Options allow the viewer to block any program without content advisory data with the use of its

“NO RATING INFORMATION” control. And to block programs that are encoded as “unrated” with its

“UNRATED PROGRAMMING” control option.

Since the reception of Content Advisory data can take a few seconds, you may want to use the “CHANNEL

CHANGE” option to be sure no viewing is allowed during blocked program channel changes. This can eliminate the display of a few seconds of undesirable video on the TV, or receiving scenes from a Ratings blocked channel source.

CONTENT ADVISORY

REVIEW SETTINGS

U se the Review Settings control to quickly check the status for

Content Advisory system Parental

Guidelines and Movie Rating

“Blocked” program levels.

1 Select the REVIEW

SETTINGS Menu option.

With CONTENT ADVISORY

Menu on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

The TV screen will display the current Parental Guideline and

Movie Ratings Blocked program settings. Content Advisory system status will also be shown (Enabled

-On, or Disabled - Off).

CONTENT ADVISORY

PARENTAL

GUIDELINES

MOVIE

RATINGS

REVIEW

SETTINGS

BLOCKING

OPTIONS

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

CONTENT ADVISORY ENABLED

TV PARENTAL

GUIDELINES

BLOCKED

TV-Y

TV-Y7 FV

TV-G

TV-PG DLSV

TV-14 DLSV

TV-MA LSV

MOVIE

RATINGS

BLOCKED

PG-13

NC-17

M to EXIT

F EATURE M ENU C ONTROLS ( CONTINUED )

CHANNEL LABELS

D o you ever have trouble remembering on which channel a particular station or network is located? The Channel

Labels Control is a quick way to view and select channels from a list of Labeled channels.

A Label is a four letter callout you can set to appear with the on screen channel number. Example

Label: WXYZ - for a TV station's call letters.

To select channels from the

Channel Labels Control:

FEATURE MENU

CHANNEL

LABELS

LANGUAGE

SELECTION

EXIT MORE...

3 OF 5

CHANNEL LABELS

MANUAL

Create Your Own

Choose From List

PRESETS

EXIT

With the FEATURES MENU

(3 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select CHANNEL

LABELS.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select either:

"MANUAL" to create your own label for a channel.

"PRESETS" to choose from a list of prewritten channel labels.

(See instruction details on this page.)

3 Press the Exit button to clear the screen.

Menu

DN ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

CHANNEL GUIDE LABEL

C H 1 0 C B S

ANTENNA A LABELS or to SELECT

M or to CHANGE when FINISHED

MANUAL- To create your own Channel Label:

Press the Channel ▲▼ or

Number buttons to select desired station.

A red highlight shows the active letter space for the channel label.

Press the outer MENU

▲▼ buttons on the remote to pick any of the letters or symbols that are given for your use.

Press the outer MENU

Press the Exit button to clear the screen when finished.

BRV

CBN

CNBC

CMT

CHOOSE ANTENNA A CHANNEL to SELECT LABEL

M to EXIT

PRESETS -To pick a Label from the "LABEL" list:

Press the Channel ▲▼ or

Number buttons to select desired station.

Press the outer MENU

▲▼ buttons to move up and down the Channel

Label list.

Just stop on any label you might want to use.

The selected label automatically appears with channel changes and when the STATUS button is pressed.

Press the Exit button to clear the screen when finished.

F EATURE M ENU C ONTROLS ( CONTINUED )

LANGUAGE

N ote: If you went through First

Time Setup, This task has already been completed for you.

For our Spanish and French speaking TV owners an on-screen

LANGUAGE option is present.

With the LANGUAGE control you can set the TV’s on-screen features to be shown in either English,

Spanish or French.

1 Select the LANGUAGE

DISPLAY control.

With the FEATURES MENU (3 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU▲▼ and

MENU (or ok) buttons to highlight and select (

U) English,

Español, or Francais on the display control.

Text for the on-screen Menu will change to the selected language.

3 Press the Exit button to clear the screen.

MART

ELP

Remember, the

Language control only makes the TV’s on-screen

(MENU) items appear in English,

Spanish, or French text. It does not change the other on-screen text features such as Closed Captioned

(CC) TV shows.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

FEATURE MENU

CHANNEL

LABELS

LANGUAGE

SELECTION

EXIT

LANGUAGE SELECTION

ENGLISH

ESPANOL

FRANCAIS

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

3 OF 5

EXIT HELP

OUND

ENU

ONTROL

DJUSTMENTS

BASS, TREBLE, BALANCE

Y our TV also has individual sound adjustment controls. The

BASS (low frequency), TREBLE

(high frequency) , and Speaker

BALANCE may all be used to adjust the sound playback of TV programs.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

SOUND MENU

BASS

BALANCE

INCREDIBLE SURROUND

TREBLE

BASS BOOST

EXIT MORE...

1 OF 3

1 Select BASS, or TREBLE, or

BALANCE sound control.

With the SOUND MENU (1 of 3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

Press the MENU § © (Left

and Right) buttons to adjust the sound control to levels you prefer.

3 Press the Exit button to clear the screen.

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO

A/CH

MIN

BASS

MAX

EXIT NEXT...

Select “Next” and then press the MENU (M) button to view and adjust additional Audio controls. For Example: Treble, Balance, etc.

Note: Audio Menu controls can be set separately dependent upon the current TV operating mode (NTSC/ANTENNA, AUX 4, AUX 5, etc.). For instance, the TV Speaker On/Off control can be set to

“ON” for normal NTSC TV viewing playback operation; while the same Audio control can also be set to “OFF” in a AUX 4 or AUX 5

Input Source mode.

BASS BOOST

T he BASS BOOST control increases the low frequency audio range of the TV. This creates a deeper, fuller playback sound which can be heard through the

TV's speakers.

Select BASS BOOST sound control.

With the SOUND MENU (1 of 3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and turn ON (

U) the

BASS BOOST control.

3 Press the Exit button to clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

SOUND MENU

BASS

BALANCE

TREBLE

BASS BOOST

INCREDIBLE SURROUND

EXIT MORE...

1 OF 3

BASS BOOST

OFF

EXIT NEXT...

STEREO

Y our TV is able to receive broadcast stereo TV programs.

The TV is equipped with an amplifier and twin speaker system through which the stereo sound can be heard.

Note: STEREO will appear on the

TV’s channel status screen to indicate when a stereo broadcast signal is available and received.

1 Select STEREO sound control.

With the SOUND MENU (2 of 3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and turn ON (

U) the

STEREO mode.

Press the Exit button to clear the screen.

OUND

ENU

ONTROLS

(

CONTINUED

)

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

Menu

3/5

Exit

INFO ok

SOUND

EXIT mute

HDR PTV channel

Source volume

A/CH

MART

ELP

SOUND MENU

BASS

Remember.

If a stereo signal is not available and the TV is placed in the STEREO mode, sound coming from the TV will remain

BALANCE BASS BOOST

INCREDIBLE SURROUND

EXIT MORE...

1 OF 3

SOUND MENU

TV SPEAKERS

DISPLAY VOLUME

SECOND AUDIO PROGRAM

STEREO

EXIT MORE...

2 OF 3

STEREO

MONO AT ALL TIMES

STEREO IF AVAILABLE

EXIT

SECOND AUDIO PROGRAM

Second Audio Program (SAP) is part of the stereo broadcast system. Sent as a additional audio channel SAP can be heard apart from the current TV program sound. TV stations are free to use SAP for any number of purposes, but many experts believe it will be used for foreign language translations of TV shows (or for weather and news bulletins.)

NOTE: If a SAP signal is not present with a selected program, the SAP option can not be selected. "This program does not contain SAP information" will show on the TV screen.

SOUND MENU

TV SPEAKERS

DISPLAY VOLUME

STEREO

SECOND AUDIO PROGRAM

EXIT MORE...

2 OF 3

SECOND PROGRAM SOUND CAN

ONLY BE SELECTED (

U) WHEN

SAP INFORMATION IS PRESENT

ON CURRENT CHANNEL.

n e w s a n d t o d a y

' s a n d f o r

SECOND AUDIO PROGRAM

NORMAL SOUND

SECOND PROGRAM SOUND

EXIT n e w s t o d a n d f o r a y

' s a n d

OUND

ENU

ONTROLS

(

CONTINUED

)

INCREDIBLE SURROUND he Incredible Surround control T can be used to add greater depth and dimension to both monaural

(MONO) and STEREO TV sound.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

1 Select the INCREDIBLE

SURROUND control.

With the SOUND MENU (2 of 3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and turn ON (

U) the INCREDIBLE

SURROUND mode.

3 Press the Exit button to clear the screen.

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

SOUND MENU

BASS

BALANCE

TREBLE

BASS BOOST

INCREDIBLE SURROUND

EXIT MORE...

1 OF 3

INCREDIBLE SURROUND

OFF

EXIT NEXT...

DISPLAY VOLUME

U se the DISPLAY VOLUME control to see the TV's volume level settings on the TV screen.

Once set the Volume Display will be seen each time the VOLUME buttons (on the TV or remote) are pressed.

1 Select DISPLAY VOLUME control.

With the SOUND MENU (2 of 3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

2 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and turn ON (

U) the

DISPLAY VOLUME control.

3 Press the Exit button to clear the screen.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

SOUND MENU

BASS

BALANCE

INCREDIBLE SURROUND

TREBLE

BASS BOOST

EXIT MORE...

1 OF 3

MART

ELP

Remember,

"DURING

ADJUSTMENT" means the volume level will be on screen whenever the

Volume buttons are pressed.

SOUND MENU

TV SPEAKERS

DISPLAY VOLUME

STEREO

SECOND AUDIO PROGRAM

EXIT MORE...

2 OF 3

DISPLAY VOLUME

NEVER

DURING ADJUSTMENT

EXIT

S OUND M ENU C ONTROLS ( CONTINUED )

TV SPEAKERS

W ould you like to hear TV programs through your audio hi-fi system? The PTV's Variable

Audio Output jacks and TV

Speaker On/Off control work together to offer you this TV sound option.

SOUND MENU

TV SPEAKERS

DISPLAY VOLUME

STEREO

SECOND AUDIO PROGRAM

EXIT MORE...

TV SPEAKERS

2 OF 3

NORMAL

TV SPEAKERS OFF

EXIT

VARIABLE

AUDIO

OUTPUT JACKS

1 Connect the R(ight) and L(eft)

VARIABLE AUDIO OUT jacks on the PTV to the R and L Audio

Input jacks on your amplifier or sound system.

Set the audio system's volume to normal listening level.

2 Turn the PTV and audio system

ON. You can now adjust the sound level coming from the audio system with the Volume ▲▼ buttons on the TV or remote.

3 To hear the TV sound from only the audio system speakers, select

TV SPEAKERS control.

With the SOUND MENU (2 of 3) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

4 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and turn OFF (

U) the TV

SPEAKERS control.

You should now only hear TV sound coming from the audio system speakers.

5 Press the Exit button to clear the screen.

MART

ELP

Remember, the audio system may have to be in

AUX(iliary) mode to play sound from the TV (Outputs).

Note: When the TV SPEAKER control is set to "NORMAL" (for

TV speaker operation) make sure the VARIABLE AUDIO OUTPUT control (see next page) is also set to "STEREO" in order for the TV's

AUDIO OUTPUT jacks to work properly.

Menu ok mute

HDR PTV channel

Source volume

3/5

Exit

INFO

A/CH

AUDIO IN

(RED/WHITE)

R L

AUX/TV INPUT

PHONO INPUT

BACK OF PTV

AUDIO SYSTEM

Note: Audio Menu controls can be set separately dependent upon the current TV operating mode (NTSC/ANTENNA, AUX 4, AUX 5, etc.). For instance, the TV Speaker On/Off control can be set to

“OFF” for normal NTSC TV viewing playback operation; while the same TV Speaker Audio control can also be set to “ON” in a AUX 4 or AUX 5 Input Source mode.

FIXED

VAR

PIP

AUDIO OUT

ANT A/CABLE

UHF/VHF

VIDEO OUT

NOTE: The TV’s FIXED

AUDIO OUTPUT jacks can also be used for the playback of TV program sound with an external audio amplifier, or home theater hi-fi system,

Connection of the FIXED

AUDIO OUT(puts) is similar

G-LINK to the Variable Audio Outputs

(as shown above). However, specific sound level adjustments will be made with the controls at the external amplifier or home sound system (instead of through the

TV’s audio level controls.)

NOTE: The TV’s PIP

AUDIO OUTPUT jacks can also be used for additional stereo playback options such as wireless transmitter headphone hook-up, or as an external amplifier connection source. However, with normal

PIP feature operations (when the ANT A and ANT B Input sources are connected for use), the PIP AUDIO

OUTPUTs will switch from stereo to monaural (mono) sound. Stereo sound will only be available with the TV’s

Main screen (or ANT A supplied signal) at that time.

SURROUND SOUND

B y adding optional external speakers to the PTV's sound system, you can create the feeling of reflected sound that surrounds you at a movie theater or concert hall.

1 Connect both external

speakers to the speaker wire terminals on the PTV.

Recommended speakers: 8 ohm, 15 watt minimum. Be sure the (+) and

(-) speaker wires are connected to the correct R(ight) and L(eft) speaker terminals on the TV.

Place the speakers so the viewing area is between the PTV and the rear surround speakers.

(See overhead view drawing.)

3 Turn PTV ON and place the

STEREO control to the "STEREO

IF AVAILABLE" (

U) position.

After setup whenever a stereo signal is received the audio will be heard in Surround Sound.

S OUND M ENU C ONTROLS ( CONTINUED )

REAR SURROUND SOUND

SPEAKER TERMINALS

SUBWOOFER OUTPUT

Use the Subwoofer Output (RCA plug connector) to send the subwoofer audio channel signal (at line level) to an optional external powered Subwoofer speaker. The

Subwoofer audio signal is for the playback of only the lowest frequency notes (under 100 Hz).

BACK OF PTV

MART

ELP

Remember,

Surround Sound will not work with only one speaker connected; or with monaural audio material (unless

Variable Audio

Surround control is turned ON - see section below).

+ -

REAR SURROUND SOUND SPEAKERS

Note: The rear Surround Sound speakers will not be heard at the same volume level as the front TV speakers. It is intended for the rear speakers to give a background noise effect which requires a lower volume level than the TV's front speakers.

PTV

SUBWOOFER

REAR SPEAKER REAR SPEAKER

PRIMARY VIEWING AREA

VARIABLE AUDIO OUTPUT

T he PTV's Variable Audio

Output jacks can also be used for Surround Sound. Once they are connected to an external hi-fi system its speakers can be used for the playback of Surround Sound.

1 Connect the R(ight) and L(eft)

VARIABLE AUDIO OUT jacks on the PTV to the R and L Audio

Input jacks on your amplifier or sound system.

Turn PTV ON and place the

VARIABLE AUDIO OUTPUT on screen control to the SURROUND

(

U) position. (Sound Menu 3 of 3).

Note:This will change the

Left/Right channel audio line level signal at the Audio Output jacks to the same signal found at the PTV's

Surround Sound Speaker terminals.

SOUND MENU

VARIABLE AUDIO OUTPUT

EXIT MORE...

VARIABLE AUDIO OUTPUT

3 OF 3

STEREO

SURROUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO

A/CH

1 BACK OF PTV

VARIABLE AUDIO

OUTPUT JACKS

AUDIO

INPUT JACKS

R L

AUX/TV INPUT

PHONO INPUT

AUDIO SYSTEM SPEAKERS USED AS REAR

SURROUND SOUND SPEAKERS

PTIONAL

URROUND

OUND

ONNECTIONS

E xtra speaker connections have been supplied on the rear of the PTV. These extra connections are especially important for some of the optional Amplifier and multispeaker arrangements that are possible with Dolby Pro Logic

Surround Sound audio features.

For example: With the Surround mode multiple speakers are needed to complete the setup for proper

DOLBY SURROUND sound playback-

2 Front Left/Right Speakers

1 Center Channel Speaker

2 Rear Surround Speakers

The Front Left/Right, Center, and

Rear Surround Speakers have their signals supplied by the connections located on the back of the Dolby

ProLogic Audio Receiver.

Note: A CENTER CHANNEL

AMP(plifier) INPUT is also located on the PTV. This input can be used to connect the external

Audio Receiver's Center Channel

Output in order to play Center

Channel sound through the internal

PTV speakers.

When an Audio Receiver is used as the audio source for the CENTER

CHANNEL AMP INPUT:

• Place the PTV's AMP SWITCH to the EXTERNAL position

TV’S INTERNAL SPEAKERS

USED FOR SURROUND SOUND

CENTER CHANNEL

SURROUND

SPEAKERS

+ R - L +

CENTR CH

OUT

+ -

REAR OF PTV

AMP SWITCH

EXT INT

MAXIMUM 30 WATT INPUT TO SPEAKERS

EXT CENTER CHANNEL AMP INPUT

LEFT FRONT

SPEAKER

DOLBY PROLOGIC

AUDIO AMPLIFIER

RIGHT FRONT

SPEAKER

+ + -

REAR SURROUND

SPEAKERS

U SING THE A UDIO /V IDEO I NPUT J ACKS

AUX 1 VIDEO INPUTS

T he PTV's Audio/Video Input jacks are for direct picture and sound connections between the TV and a DVD (or VCR, etc.) that has

Audio/Video (Composite) Output jacks.

To view the playback of a DVD program disc by using the

Audio/Video Input jacks on the TV:

1 Connect the VIDEO OUT jack from the DVD to the AUX 1

VIDEO IN jack on the PTV.

PICTURE AND SOUND FROM

PLAYBACK OF DVD

ANT A

ANT B

AUX 1 DVD VIDEO

AUX 1 DVD Y P

AUX 2 VIDEO

AUX 2 Y P B P R

AUX 3 VIDEO

AUX 4 HD Y P

AUX 5 HD RGB-VGA

VIDEO IN

(YELLOW)

2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the

DVD to the AUX 1 AUDIO IN jacks on the PTV.

3 Select the “AUX 1 DVD

VIDEO” Picture Source control on the PTV.

Press the Source button on the

Pronto remote (or on the front of the PTV) to display the Input

Source control screen.

4 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the AUX

1 DVD VIDEO mode.

5 Turn the DVD ON and press

PLAY to view the playback disc on the PTV.

Menu ok

HDR PTV

Source mute channel

3 volume

3/5

Exit

INFO

A/CH

OUT

AUDIO/VIDEO

OUTPUT JACKS

ON DVD

ANTENNA

1 BACK OF PTV

OUT OUT

VIDEO

L AUDIO R

DVD

NOTE: Connections and use of the

PTV's rear AUX 2 VIDEO Input jacks are the same as for the AUX 1 jacks

(except “AUX 2 VIDEO” is selected as the Picture Source in step 3).

AUDIO IN

(RED/WHITE)

MART

ELP

Remember, if you have need for any connecting cables or devices contact your dealer or our Parts Information center (1-800-851-8885) to order any optional accessories.

U SING THE A UDIO /V IDEO I NPUT J ACKS ( CONTINUED )

AUX 3 VIDEO INPUTS

F or more convenient Direct playback connections the

PTV's Side Video (AUX 3) Input panel can be used. Located on the

PTV's right side panel (angled toward the front for easy access) these Audio/Video Input jacks allow for quick connections, particularly for the playback of

Camcorder tape recordings.

To view the playback of a

Camcorder recording using the

Audio/Video Input jacks on the side of the PTV:

ANT A

ANT B

AUX 1 DVD VIDEO

AUX 1 DVD Y P B P R

AUX 2 VIDEO

AUX 2 Y P B P R

AUX 3 VIDEO

AUX 4 HD Y P

AUX 5 HD RGB-VGA

PICTURE AND SOUND FROM PLAYBACK

OF CAMCORDER TAPE

1 Connect the VIDEO OUT jack from the Camcorder to the VIDEO

IN jack on the side of the PTV.

2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the

Camcorder to the AUDIO IN jacks on the side of the PTV.

Select the "AUX 3 VIDEO"

Picture Source control on the TV.

Press the Source button on the

Pronto remote (or on the front of the PTV) to display the Input

Source control screen.

4 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the AUX

3 VIDEO mode.

5 Turn the Camcorder ON and press PLAY to view the tape on the PTV.

SOURCE VOL M VOL

DOWN

EXIT

Menu ok

HDR PTV

Source mute channel

3 volume

VIDEO IN

(YELLOW)

3/5

Exit

INFO A/CH

VIDEO IN

AUDIO IN

AUDIO IN

(RED/WHITE)

AUDIO/VIDEO

OUTPUT JACKS

ON CAMCORDER

AUX3

S-VIDEO IN

SIDE PANEL AUDIO/VIDEO

INPUT JACKS

(S-VIDEO Input plug also provided for possible S-VHS tape playback material.)

1 2

CAMCORDER

MART

ELP

Remember, if you have a single (monaural) Audio

Output Camcorder, "Y" connectors are available to complete your connection. Contact your dealer or our Parts Information center (1-

800-851-8885) to order any optional accessories.

U SING THE A UDIO /V IDEO I NPUT J ACKS ( CONTINUED )

AUX 1 - S-VIDEO INPUTS he S(uper)-Video connection on T the rear (and Side Panel) of the

PTV can give you better picture detail and clarity for the playback of

S-VHS VCR tapes or DVDs than the normal antenna (RF Signal) or

Video (Composite) picture connections.

Note: The VCR or DVD Player) must have a S-VIDEO OUT(put) jack in order for you to complete the connections shown on this page.

PICTURE AND SOUND FROM

PLAYBACK OF S-VHS VCR TAPE

NOTE: Connections and use of the PTV's

AUX 2 and AUX 3 S-VIDEO Input jacks are the same as for the AUX 1 S-VIDEO jacks

(except “AUX 2 or AUX 3 S-VIDEO” is selected as the Picture Source in step 3).

BACK OF PTV

ANT A

ANT B

AUX 1 S-VIDEO

AUX 1 DVD Y P B P R

AUX 2 VIDEO

AUX 2 Y P

AUX 3 VIDEO

AUX 4 HD Y P

B P R

AUX 5 HD RGB-VGA

1 Connect the S-VIDEO (S-

VHS) OUT jack from the VCR to the S-VIDEO AUX 1 IN(put) jack on the PTV.

The S-VIDEO connecting cable will be supplied with the S-VHS

VCR (or DVD Player).

2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the

VCR to the AUDIO AUX 1

IN(put) jacks on the PTV.

3 Select the "AUX 1 S-VIDEO"

Picture Source control.

Press the Source button on the

Pronto remote (or on the front of the PTV) to display the Input

Source control screen.

The "AUX 1 S-VIDEO" picture source option appears only when a

S-VIDEO cable has been connected to the PTV’s AUX 1 IN(puts).

4 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the AUX 1

S-VIDEO mode.

5 Turn the VCR ON and place it in the S-VIDEO (or S-VHS) playback mode. Insert S-VHS cassette tape and playback in a normal manner.

Menu ok

HDR PTV

Source mute channel

3 volume

3/5

Exit

INFO A/CH

S-VIDEO

CABLE

OUT

S-VIDEO OUT

OUT

S-VIDEO ANTENNA

OUT

VIDEO

L AUDIO R

IN IN

AUDIO OUT

(RED/WHITE)

S-VHS VCR

NOTE: A CD-i (Compact Disc Interactive) player, Video Game, or other S-VIDEO accessory can be hooked up to the PTV using this type of connection. Please be aware that such video sources, which show a constant non-moving pattern on the screen, can cause picture tube damage. When not in use turn your video accessories OFF. Also, regularly alternate the use of video sources with normal

TV viewing.

SING THE

UDIO

IDEO

NPUT

ACKS

(

CONTINUED

)

COMPONENT VIDEO INPUTS

C omponent Video Inputs provide for the highest possible color and picture resolution in the playback of digital signal source material such as with DVD players. The color difference signals (P

, P

) and the luminance (Y) signal are connected and received separately which permits for improved color bandwidth information (not possible when using composite video or S-Video connections).

1 Connect the Component (Y P

) VIDEO OUT jacks from the

DVD player to the (Y P

)

VIDEO IN(put) jacks on the PTV.

PICTURE AND SOUND FROM PLAYBACK

OF DVD SOURCE MATERIAL

ANT A

ANT B

AUX 1 DVD VIDEO

AUX 1 DVD Y P B P R

AUX 2 VIDEO

AUX 2 Y P

AUX 3 VIDEO

AUX 4 HD Y P

AUX 5 HD RGB-VGA

NOTE: Connections and use of the PTV's rear AUX 2 Y P

Input jacks are the same as for the AUX 1 jacks (except

"AUX 2" Y P

R is selected as the Picture Source in step 3).

BACK OF PTV

FIXED

COMPONENT

VIDEO OUTPUTS

AUDIO OUT (L/R)

(RED/WHITE)

2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the

DVD player to the AUX 1 AUDIO

IN jacks on the P TV.

VIDEO OUT

S-VIDEO VIDEO 1 AUDIO

OUT OUT

OUT

VIDEO 2

3 Select the "AUX 1 Y P

Picture Source control on the TV.

Press the Source button on the

Pronto remote (or on the front of the PTV) to display the Input

Source control screen.

4 Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the AUX

1 Y P B P R mode.

5 Turn the DVD player ON and press PLAY to view the source material playback on the TV.

Menu mute channel

3 ok

HDR PTV

Source

4 volume

3/5

Exit

INFO A/CH

DVD PLAYER

(equipped with Component Color

& Luminance Outputs)

Optional Video/Audio Cables (with standard

RCA plug connectors) are available to complete your Component Input Jack connections. Contact your dealer, or our Parts

Information Center (1-800-851-8885) to order any optional accessories.

MART

ELP

The description for the component video connectors may differ depending on the

DVD player or accessory digital source equipment used (e.g. Y P B P R ; R-Y/B-

Y/Y; Cr/Cb/Y, etc.). Although abbreviations and terms may vary, the letters “B” and “R” stand for the blue and red color component signal connectors, and “Y” indicates the luminance signal. Refer to your DVD or digital accessory Owner’s Manual for definitions and connection details.

SING THE

UDIO

IDEO

UTPUT

ACKS

(

CONTINUED

)

AUDIO/VIDEO OUTPUTS he Audio/Video Output jacks T on the PTV can be used to record TV programs on VCRs which have Audio/Video Input jacks.

To record TV programs by using the Audio/Video jacks on the PTV:

1 Connect the VIDEO OUT jack from the PTV to the VIDEO IN jack on the VCR.

2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the

PTV to the AUDIO IN jacks on the

VCR.

3 Select the "ANTENNA A"

Picture Source control on the TV.

Press the Source button on the

Pronto remote (or on the front of the PTV) to display the Input

Source control screen.

Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the

ANTENNA A mode.

4 Select the channel on the PTV that you want to record.

5 Turn the VCR ON. Put a cassette tape in the unit and place the VCR in the RECORD mode.

PICTURE AND SOUND BEING RECORDED

ON VCR.

ANT A

ANT B

AUX 1 DVD VIDEO

AUX 1 DVD Y P

AUX 2 VIDEO

AUX 2 Y P

AUX 3 VIDEO

AUX 4 HD Y P

AUX 5 HD RGB-VGA

Menu ok

HDR PTV

Source mute channel

3 volume

3 3/5

Exit

INFO

A/CH

HDR PTV

Status

+100

2/5

INFO

Surf

A/CH

BACK OF PTV

VIDEO OUT

(YELLOW)

OUT

AUDIO/VIDEO INPUT

JACKS ON VCR

ANTENNA

VCR

OUT

VIDEO

R AUDIO L

AUDIO

OUT

(RED/

WHITE)

MART

ELP

Remember, If the VCR has an INPUT SELECTOR switch, place it in the LINE or

CAMERA position.

Unattended Timer Recordings with a VCR are possible, but not recommended with this connection since the TV must be left ON for the VCR to record.

BRIGHTNESS

PICTURE

SHARPNESS

SVM

COLOR

OFF

TINT

VOLUME BAR ON

ONITOR

EATURES

ENU

ONTROLS

VGA/RGB/HDCOMPONENT

A nother function with your PTV is for the connection and use of Personal Computers (PCs), and other High Definition (HD) digital source equipment (through the use

TV’s Monitor inputs and display mode). Dedicated HD Audio Input jacks (located on the rear of the

PTV) are also paired to the external source Monitor Video

Inputs (VGA and HD Component

Video In) for audio playback connections as well.

For example: To connect a Philips

DVX8000 Multimedia Home

Theater (MMHT) for monitor mode display use on the PTV:

ANT A

ANT B

AUX 1 DVD VIDEO

AUX 1 DVD Y P B P R

AUX 2 VIDEO

AUX 2 Y P

AUX 3 VIDEO

AUX 4 HD Y P

AUX 5 HD RGB-VGA

SOURCE

VOL M

VOL

DOWN

EXIT

REAR OF PTV

Left/Right

Audio IN

GND AM

ANTENNA

VIDEO

DSS LD VCR 2 IN-VCR-OUT TV

MONT

MULTI REMOTE

OUT

AC-3 RF

CD IN-TAPE-OUT DSS LD VCR 2 IN-VCR-OUT MULTI

AC-3/

PCM

COAX

AC-3/PCM

OPT

1 Connect a 15 pin VGA signal

cable (optional) from the VGA

(or SVGA) jack on the select auxiliary equipment (example:

DVX8000 MMHT) to the VGA

Input jack on the PTV.

2 Connect the Left/Right HD

INPUT AUDIO IN jacks on the

PTV to the (L/R) Audio Output jacks (labeled Front) on the

DVX8000 MMHT.

3 Press the Source button on the

Pronto remote (or on the front of the PTV) to select the AUX 5 HD

RGB/VGA Monitor Input mode.

Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select (

U) the AUX

5 HD RGB/VGA mode.

4 Use the DVX8000 MMHT as the video (and/or audio) playback source for material to be displayed on the PTV’s screen.

Menu ok

HDR PTV

Source mute channel

3 volume

3/5

Exit

INFO

A/CH

HD COMPONENT VIDEO IN

OFF

USB

1 2

Note: The PTV will display any Television compatible VGA or

SVGA (60Hz only) signal input.

REAR OF DVX8000 MMHT

REAR OF PTV

15 PIN VGA

Connection Cable

AUDIO OUTPUT

SUB

WOOFER

FRONT SURROUND

CENTER

TV/CABLE

ANT

PHONE

RGB

SVGA

(RGB)

R DATA LINE

MIC

LINE IN

MART

ELP

Note: The PTV’s video display may temporarily appear misconverged during the initialization of certain VGA input connected PC programs (i.e., DOS).

Once the PC program has completed its

“bootup” phase, normal signal level processing will reoccur and the PTV display will return to normal.

• Separate Red/Green/Blue (Luminance-Y and

Color Difference-Pr/Pb) Component Video

Inputs provide for improved color bandwidth information and highest possible picture resolution for digital source connections.

• H/H + V (for combined Horizontal/Vertical sync signals) or V(ertical) sync inputs control the display of a RBG sourced picture in the left-toright dimension and from top-to-bottom.

ONITOR

EATURES

ENU

ONTROLS

MONITOR MENU CONTROLS

T he Monitor Menu feature controls are to aid you in setting up the PTV for the best in display image quality. Generally, the Monitor feature controls cover the basics in color and video image screen adjustments. A variety of Monitor Audio Input controls are also available for various PTV speaker sound adjustments. (See the Audio

Adjustments note to the right for further details on AUX(iliary) and

NTSC/Antenna mode sound controls.

PICTURE

SOUND

FEATURE

EXIT

MAIN MENU

• Note: The list of Monitor Menu features (and their individual control settings) will change or readjust according to the capabilities of the selected Display Mode (AUX 4, AUX 5, etc.) .

BRIGHTNESS

PICTURE

SHARPNESS

COLOR

TINT

COLOR TEMP

BACK BASS

TREBLE

BALANCE

BASS BOOST

INCR SURROUND

STEREO

MORE....

STEREO

AUTO SOUND

TV SPEAKERS

VAR AUDIO OUT

VOLUME BAR

BACK

(OR OFF)

(OR MONO)

NORMAL

STEREO

(OR OFF)

(OR SURROUND)

(OR OFF)

1 Press the Source button on the

Pronto remote (or on the front of the PTV) to select the desired High

Definition (HD) display mode

(AUX 4 HD Y PB PR; or AUX 5

HD RGB-VGA).

2 Press the MENU (or ok) buttons to display the Main Menu controls for the Monitor Mode.

3 Press the MENU buttons to choose any of the individual controls you wish to adjust for the selected HD mode. Then press the

Menu (or ok) button to select the highlighted control.

Also, use the Menu and Menu

(or ok) buttons to adjust the selected control.

4 Press the Exit button on the remote to clear the screen after you have finished with all of your feature control adjustments.

MART

ELP

Certain barscale Monitor

Feature Menu adjustments

(such as Brightness, Picture, etc.) will display separate control panel screens for individual settings.

Repress the Menu button (on the remote or local keyboard) to return the PTV to the Monitor Menu when control adjustments are complete.

Menu ok

HDR PTV

Source mute channel

1 volume

3/5

Exit

INFO A/CH

Note: Audio Menu controls can be set separately dependent upon the current TV operating mode

(NTSC/ANTENNA, AUX 4, AUX 5, etc.). For instance, the TV Speaker On/Off control can be set to

“ON” for normal NTSC TV viewing playback operation; while the same Audio control can also be set to “OFF” in a AUX 4 or AUX 5 Input Source mode.

BRIGHTNESS

PICTURE

SHARPNESS

SVM

COLOR

OFF

TINT

VOLUME BAR ON

DISPLAY MODE VGA

DISPLAY FORMAT PC

SYNC TYPE AUTO

HOR PHASE

BP WIDTH

LANGUAGE

BACK

ENGLISH

(OR SVGA/AUTO/HD)

(OR NORMAL)

(OR MODE 1-4)

(OR ESPANOL/FRANCAIS

• Use the Brightness and other

Monitor picture features (such as

Picture, Sharpness, etc.) to adjust overall screen intensity for optimum light/dark screen areas and shading details.

• Turn the Volume Bar Sound

Menu control ON to display the volume level settings for external audio sourced material on the screen.

• Select the Bass/Treble/Balance

Sound Menu controls to adjust low/high frequency sound and speaker balance for external input audio source material played through the PTV’s audio system.

• Use the Display Mode and

Format Feature Menu controls to set the PTV for the type of external monitor display mode source (VGA, AUTO, SVGA,

EXT HD); and the display screen format used (PC,

NORMAL, WIDESCREEN).

• Additional Sync Type,

Horizontal Phase, Back Porch

(BP) Width Feature Menu controls can be used to adjust for color shifts, black level, and various other display screen imagery.

• Use the LANGUAGE control to set the HD Menu control screens for English, Spanish (Espanol), or

French (Francais) language term displays.

AUTO PICTURE

W ith Auto Picture you can set a number of video and audio controls to your own personal preference. Once the individual controls have been adjusted to the levels you desire, use the list of Auto

Picture feature category titles to quickly reselect these “personalized” settings contained within the memory of the PTV. (See the next page for more details on the labeling options and use of Auto Picture.)

EMOTE

ONTROL

PERATION

AUTO MENU

AUTO

PICTURE

AUTO

SURF

EXIT

AUTO

SOUND

1 Press the AUTO button on the

Pronto remote (touchscreen 1 of 5).

Press the MENU (or ok) button

(Pronto remote touchscreen 3 of 5) to select the Auto Picture feature highlighted in RED.

2 Press the MENU ▲▼ buttons to highlight the category list for Auto

Picture. Press the MENU (or ok) button to select (

U) the desired title.

3 Press the MENU buttons to choose any of the individual controls you wish to adjust for the Auto

Picture selected title. Then press the

Menu (or ok) button to select the highlighted control.

4 Press the Menu and Menu

(or ok) buttons to adjust the selected control.

5 Press the Exit button on the remote to clear the screen after you have finished with all of your Auto

Picture feature control adjustments.

1 mute channel

HDR PTV

Power

Auto

Sleep

Status

1/5

Analog Format

INFO A/CH

Menu volume

HDR PTV

Source

3/5

Exit

INFO ok

A/CH 2

AUTO PICTURE

SPORTS

MOVIES

WEAK SIGNAL

CARTOONS

CUSTOM

FACTORY SETTINGS

M to SELECT

EXIT

AUTO PICTURE MENU

CHANGE LABEL

ANALOG FORMAT

BRIGHT

COLOR

TINT

PICTURE

EXIT MORE...

1 OF 3

AUTO PICTURE MENU

SHARP CLEARVIEW

FLESH CORRECTION SAP

BASS

TREBLE

EXIT MORE...

2 OF 3

MART

ELP

Note: Select the

“FACTORY SETTINGS” category to automatically return the

TV to the video and audio control levels preset at the factory prior to product shipment.

AUTO PICTURE MENU

BALANCE BASS BOOST

STEREO

INC. SURR

EXIT

VID ENHANCE

COLOR TEMP

MORE...

3 OF 3

EMOTE

ONTROL

PERATION

(

CONTINUED

)

AUTO PICTURE

F ollowing your initial setup adjustments (see previous page), just select the desired Auto Picture category in order to place the PTV to the personalized set of audio and video control settings for that title.

1 Press the AUTO button on the

Pronto remote (touchscreen 1 of 5)..

Then press the MENU (or ok) button

(Pronto remote touchscreen 3 of 5) to select the AUTO PICTURE control feature.

AUTO MENU

AUTO

PICTURE

AUTO

SURF

EXIT

AUTO

SOUND

SMART PICTURE

SPORTS

MOVIES

WEAK SIGNAL

CARTOONS

CUSTOM

FACTORY SETTINGS

M to SELECT

2 Press the MENU ▲▼ buttons with the list of “AUTO PICTURE” categories on the TV screen to highlight the desired category. Then press the Menu (or ok) button to select the audio and video control settings for that particular title.

3 Press the Exit button on the remote to clear the screen.

1 mute channel

HDR PTV

Power

Auto

Sleep

Status

1/5

Analog Format

INFO A/CH

Menu volume

HDR PTV

Source ok

3/5

Exit

INFO A/CH 1

EXIT

CHANGE LABEL

T he "CHANGE LABEL" control can be used to change the title of a AUTO PICTURE setting into a name or label that may be easier for you to remember.

1 With the AUTO PICTURE

“CHANGE LABEL" control on the screen, press the MENU ▲▼ buttons to spell out a new label or title for the selected AUTO

PICTURE category.

Press the Exit button to clear the screen when the new label is finished.

AUTO PICTURE MENU

CHANGE LABEL

ANALOG FORMAT

BRIGHT

COLOR

TINT

PICTURE

EXIT MORE...

1 OF 3

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

AUTO PICTURE LABEL

M Y O W N

M or or to SELECT to CHANGE when FINISHED

EMOTE

ONTROL

PERATION

(

CONTINUED

)

AUTO SOUND

A re you tired of the sound of commercials following you throughout the house? Auto Sound allows you to preset a desired volume level that the PTV sound will not go above. This makes for an even, more consistent sound by reducing the “peaks” and “valleys” that can occur during commercials.

1 Press the AUTO button on the

Pronto remote (touchscreen 1 of

5).

2 With the AUTO Menu on screen, move the RED highlight with the MENU buttons

(Pronto touchscreen 3 of 5). Then press the MENU (or ok) button to select the highlighted Auto Sound control.

3 Press the Menu ▲▼ and the

Menu (or ok) buttons to turn the

Auto Sound control ON (or OFF.)

4 Press the Exit button to clear the screen when completed.

AUTO PICTURE

AUTO

PICTURE

AUTO

SURF

EXIT

AUTO

SOUND

1 mute channel

HDR PTV

Power

Auto

Sleep

Status

1/5

Analog Format

INFO A/CH

Menu volume

HDR PTV

Source ok

3/5

Exit

INFO A/CH 2

AUTO SOUND

✓ O N

O F F

EXIT

MART

ELP

Remember, Auto Sound works for sound levels coming from either the

Antenna/Cable input on the rear of the PTV (RF audio); or the

Auxiliary (VCR/AUX IN) audio inputs.

When using a Cable Converter

Box with the Auto Sound Control

ON, the TV’s volume level may take up to ten seconds to gradually increase to normal listening levels

(when the TV’s first turned on).

This is considered NORMAL with various Cable Converter Box use.

R EMOTE C ONTROL O PERATION ( CONTINUED )

2-C

HANNEL

URF

UTO

URF

A “list” or series of previously viewed channels can be selected with the SURF button on your remote control. With this feature you can easily switch between different TV programs that currently interest you.

The Auto Surf control allows you to set up to 10 channels in its quick viewing “list”.

1 Press the AUTO button on the

Pronto remote (touchscreen 1 of 5).

2 With the AUTO Menu on screen, move the RED highlight with the MENU buttons (Pronto touchscreen 3 of 5). Then press the

MENU (or ok) button to select the highlighted Auto Surf control.

3 Press the Menu ▲▼ then the

Menu (or ok) button to select either

Auto Surf or 2-Channel Surf. (See explanation of Surf options with the illustration on this page.)

4 Press Exit button on the remote control to clear the screen.

AUTO PICTURE

AUTO

PICTURE

AUTO

SURF

EXIT

AUTO

SOUND

1 mute channel

HDR PTV

Auto

Power

Sleep

Status

1/5

Analog Format

INFO A/CH

Menu volume

HDR PTV

Source ok

3/5

Exit

INFO A/CH 2

AUTO SURF

✓

A U T O S U R F

2 - C H A N N E L S U R F

EXIT

2 CHANNEL SURF- Current and one previous channel in the ring.

AUTO SURF - Current and up to nine additional channels available in the ring. Note: The Channel Surf ring can be used with fewer than ten channels. In this way, the number of

Surf channels can match or fit your present viewing interests.

MART

ELP

To Use 2-

Channel Surf:

With the 2-Channel

Surf control ON, select the two desired

channels for viewing with the number buttons on the remote control (Pronto touchscreen 2 of 5).

Then press the SURF button on the remote

(touchscreen 2 of 5) to

"toggle" between the two selected channels.

H OW T O U SE A UTO S URF

1 With the Auto Surf control ON

(see above), select a desired

channel for viewing. You can use the number buttons on the remote (or the Channel ▲▼ buttons).

2 Press the SURF button on the remote (Pronto touchscreen 2 of 5).

Some channel numbers may already appear within the Surf channel list.

3 Press the Menu (or ok) button

(Pronto touchscreen 3 of 5) to

"ADD" the selected channel to the

Surf list.

Select the next desired channel and repeat steps 2 and 3. Continue until all desired channels are on the Surf list.

4 Press the SURF button on the remote to quickly review current action on channels contained within the Surf list.

SURF

M to ADD

6 to List

SURF

1 mute channel

HDR PTV

Status volume

2/5

+100

INFO

Surf

A/CH

HDR PTV

Source Menu ok

3/5

Exit

INFO A/CH

M to DELETE

6 to List

SURF

M to DELETE

3 to List

M to DELETE

6 to List

SURF

M to DELETE

10 to List

Note: To Delete a channel from the Surf list just press the SURF button to select the desired channel. Then press the Menu

(or ok) button and the channel will be immediately dropped from the on screen Surf list.

OW TO

SE THE

ICTURE

-I

-P

ICTURE

(PIP) F

EATURE

P icture-in-Picture (PIP) is the showing of two pictures on the

TV screen at the same time. (One main screen picture and one small inset picture - or PIP). For your ease and convenience this PTV has two separate inputs

(ANTenna A and ANTenna B) for your home’s Antenna and/or

Cable TV system signal.

The ANT A input is primarily for the TV’s main screen picture.

The ANT B input is provided as a second, dedicated source option

for the PTV’s PIP “window” and its feature operations. The signal connected to the ANT B input can be either a Split Signal Input (as described in the section on this page), or another type of external signal source (such as a satellite dish system, additional home antenna, video accessory, etc.).

See the following steps on how channels connected to the

ANT(enna) B Input can be shown and used within the PIP window:

1 Connect your Antenna or

Cable TV signal to the single 75 ohm INPUT plug on a two-way

Signal Splitter (not supplied).

Connect two lengths of RF

Coaxial Cable (F-type connectors on both ends) to the two OUTPUT plugs on the two-way Signal

Splitter.

2 Connect the twin OUTPUT

plugs on the Signal Splitter to the

ANT A and ANT B Inputs on the rear of the PTV.

continue to next page

- MAIN SCREEN -

Display signal supplied primarily through

ANT A Input on rear of TV.

300 to 75

Ω

Adapter

(483521827003)

Combination VHF/UHF Antenna

Twin Lead

Wire

- Outdoor or Indoor Antenna receives normal broadcast channels

2-13 (VHF) and 14-69 (UHF).

Round Cable

75(

Ω

) Ohm

OPTIONAL TWO-WAY

SIGNAL SPLITTER

(single 75ohm Input to twin 75 ohm Outputs optional RF Coaxial connecting cables also required)

Cable TV Signal

ANT(enna)

B Input

Note: The purpose of the ANT B input is to provide an easily connected, dedicated picture source for PIP feature use. Other signal source options (such as a satellite dish system, additional external antenna, VCR, or Video Game) could also be connected and displayed on the TV’s PIP screen window through the use of the ANT B input.

Round Cable

75(

Ω

) Ohm

Cable TV

Company

SOURCE

DOWN

EXIT

ANT(enna) A

Input

- PIP WINDOW -

Display signal supplied primarily through ANT

B Input on rear of TV.

BACK OF TV

MART

ELP

For other possible PIP connections see page 49 for the "More PIP Connections" section.

If you need any accessories or parts to complete the described

PIP connections, contact your dealer, or our Parts Information

Center at (1-800-851-8885) for details.

See the Set-Up Guide also provided with your TV set for further Cable TV connection options and accessories.

N ow that you have completed the required connections on the previous page you are ready to follow the simple steps shown below.

Press the PIP ON/OFF button on the remote (Pronto touchscreen

4 of 5).

The PIP window should show in one of the corners of the PTV screen.

4 Place the PTV's PIP SOURCE

SELECT control to "ANT B"-

• Press the PIP Source button on the remote (Pronto touchscreen

4 of 5) to select “ANT B” as the PIP source, (or use the

FEATURES MENU 4 of 5 control screen to select the PIP

Source Select item as ANT B.

Also be sure the PTV's Main screen PICTURE SOURCE

SELECT control is "ANT A".

Use the remote’s Source button

(Pronto touchscreen 3 of 5) to set the PTV to ANT A mode.

Press the Exit button to clear the screen when the above Menu items have been set.

Press the SWAP button on the remote to move the ANT B and

ANT A Input pictures between the

PIP window and Main screen.

Use the PIP CH(annel) Up and

Down buttons to select desired programs for viewing in the PIP window. Program Sound occurs with the channels displayed on the

Main screen.

- MAIN SCREEN -

MAIN PICTURE SOURCE SELECT

SET TO "ANT A"

BLACK frame around the PIP window appears when the ANT A Input is on the Main screen.

W X Y Z

PIP: 8

- PIP WINDOW -

STEREO 12:34

• Main Screen is CH 5 from ANT A input.

• PIP is CH 8 from ANT B input

5 mute channel

4/5

HDR PTV

PIP

channel

On/Off

Size Position

Freeze

Swap

Source

INFO A/CH volume

PRESS

Swap button on the remote to switch programs shown on the Main screen and in the

PIP window.

PIP SOURCE SELECT SET TO "ANT B"

PIP SOURCE SELECT

ANT A

ANT B

AUX 1 VIDEO

AUX 2 VIDEO

AUX 3 VIDEO

SIDE VIDEO

EXIT

WHITE frame around the PIP window appears when the ANT B Input is on the Main screen.

A N T B

PIP: 5

• Main Screen shows CH 8 from ANT B input.

• PIP is CH 5 from ANT A input.

MART

ELP

Remember, if you see the same picture on the main screen and in the PIP window, check to be sure the PTV's PIP

Source Select and Main screen

Picture Source select are set for

ANT B and ANT A respectively.

See the following page on how to operate other PIP features with the

PTV’s remote control.

NOTE: Sound for TV programs displayed in the PIP window can also be heard through the use of PIP

AUDIO OUT jacks on the rear of the

TV. Just connect the TV’s Left/Right

PIP AUDIO OUTPUTs to the correct

AUX(iliary) Inputs on an external stereo sound system (through which the PIP audio will be played).

FIXED

VAR

VIDEO OUT

PIP

AUDIO OUT

ANT A/CABLE

UHF/VHF

G-LINK

REAR OF TV

R L

AUX/TV INPUT

PHONO INPUT

PIP AUDIO

OUTPUT will be monaural

(mono) when both ANT A and

ANT B are being used for normal

PIP operation.

See page 30 for details on other stereo sound uses for the PIP

Audio Output jacks.

SING

PIP

WITH THE

EMOTE

ONTROL

B y using the PIP buttons on the

Pronto remote (touchscreen 4 of 5) the PIP picture can be moved and swapped with the main screen. The main screen picture can also be frozen in the PIP window.

1 Press the PIP ON/OFF button to show the PIP picture.

PIP appears in a corner of TV screen. Press PIP ON/OFF again to remove PIP from the main screen.

2 Press the PIP POSITION

button to move the PIP picture

(from corner-to-corner on the TV screen.)

This feature allows you to move

PIP and avoid blocking off any main screen action.

With PIP on the TV screen,

press the SWAP button to swap the main screen picture with the

PIP picture. See "Smart Help" note on this page.

4 Press FREEZE to hold the current MAIN screen picture in the PIP window (Main picture is still active).

If PIP is currently OFF, the PIP window will automatically appear.

Press FRZ repeatedly to update the frozen PIP with current pictures from the Main screen.

You cannot reposition a frozen

PIP picture.

Press the PIP ON/OFF button to drop the frozen PIP picture from the screen.

1. PIP ON / OFF

2. PIP POSITION

3. PIP SWAP mute

1 channel

PIP

Size channel

On/Off

Position

Freeze

Swap

Source

4/5

INFO

A/CH volume

4. PIP FREEZE

5 Press the PIP SOURCE button to change the signal input source (ANT B, etc.) for the PIP window shown on the PTV screen.

Press the PIP CH(annel) Up and

Down (DN) buttons to select channels shown within the PIP window (when an antenna/cable signal source is connected for use with PIP).

PIP SOURCE SELECT

ANT A

ANT B

AUX 1 VIDEO

AUX 2 VIDEO

SIDE VIDEO

5. PIP SOURCE & PIP CH UP/DN

MART

ELP

Remember, if the TV’s Main screen picture is being supplied by an AUX VIDEO connected VCR (or other external accessory source); and then both the

PTV and VCR are turned OFF, a blank screen will appear when the PTV is turned back ON again.

If this happens, just reselect the PTV’s

ANT A source mode to return to normal TV viewing.

ELECTING THE

ICTURE

OURCE FOR

PIP

PIP SOURCE he picture for the PIP window T can come through either the

ANT(enna) A / B Inputs or the AUX

Video Inputs (on the rear and side of the PTV). PIP Picture Source simply tells the PTV which one of these sources it is to show in the

PIP window.

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

1 Select PIP SOURCE control.

With FEATURES MENU (4 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

Note: The Pronto remote’s PIP

SOURCE button (touchscreen 4 of

5) can also be used to quickly select picture source inputs on the rear of the PTV for the PIP window.

Press the MENU ▲▼ and

MENU (or ok) buttons to highlight and select the desired (

U) PIP

Picture Source.

ANT A or B- for a picture signal coming from either the ANT(enna)

A or B Input plug on the TV.

AUX 1 (or 2) VIDEO - for a picture signal coming from the

AUX 1 (or 2) VIDEO IN jack on the rear of the TV.

AUX 3 VIDEO - for a picture signal coming from the SIDE

VIDEO Input jack on the right side of the TV cabinet.

Press the Exit button to clear the screen.

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

FEATURE MENU

SET

CLOCK

HALF HOUR

REMINDER

EXIT

FEATURE MENU

CHANNEL

LABELS

LANGUAGE

SELECTION

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

PARENTAL

CONTROL

CHANNEL

DISPLAY

MORE...

2 OF 5

MORE...

3 OF 5

FEATURE MENU

PIP

SOURCE

PIP

POSITION

EXIT

PIP

SIZE

MORE...

4 OF 5

MART

ELP

Remember, the PIP window will be blank unless a signal is connected to the selected PIP Picture Source (ANT

B, AUX 1 VIDEO, AUX 2

VIDEO, etc.) on the set.

If you see the same picture on the main screen and in the PIP window, you may have the Main

Screen and PIP window set to the same video input source.

PIP SOURCE SELECT

ANT A

ANT B

AUX 1 VIDEO

AUX 2 VIDEO

AUX 3 VIDEO

EXIT

DJUSTING

ICTURE

-I

-P

ICTURE

OLOR AND

INT

PIP COLOR / PIP TINT he Picture-In-Picture (PIP) T

Color and Tint controls are used to make fine tune adjustments to the color settings for PIP (when it is shown on the TV screen).

1 Select PIP COLOR (or PIP

TINT) control.

With FEATURES MENU (5 of 5) on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

The PIP automatically comes on to show the PIP window on the TV screen.

3 Press the Exit button to clear the screen.

MART

ELP

Remember. Although there are separate COLOR and TINT controls for PIP, the adjustment levels for these controls depend on the TV's main picture. For example: If the main screen is showing a black and white picture, PIP would also be in black and white (even though its source is in color).

MAIN MENU

PICTURE

FEATURES

1ST TIME SETUP

SOUND

EXIT

Menu ok mute

HDR PTV

Source channel volume

3/5

Exit

INFO A/CH

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

FEATURE MENU

EXIT

SET

CLOCK

PARENTAL

CONTROL

HALF HOUR

REMINDER

CHANNEL

DISPLAY

EXIT MORE...

2 OF 5

FEATURE MENU

CHANNEL

LABELS

ACCESSORY

RF SWITCH

FEATURE MENU

EXIT

PIP

SOURCE

PIP

SIZE

PIP

POSITION

EXIT MORE...

4 OF 5

PIP COLOR

FEATURE MENU

PIP

COLOR

PIP

TINT

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE...

1 OF 5

MORE...

3 OF 5

MORE...

5 OF 5

MIN MAX

EXIT

Note: The PIP SIZE

Menu option can be used to change the size of the

PIP window shown on the TV screen.

Compare the Large and

Small size displays to see which size you prefer for onscreen PIP use. (You cannot change the size of a frozen PIP picture.)

FEATURE MENU

PIP

SOURCE

PIP

POSITION

EXIT

PIP

SIZE

MORE...

4 OF 5

T he following example is for an alternative PIP connection hookup using an external Cable

Converter Box and a VCR (as the picture source for the PIP window).

1 First use an optional signal

splitter and connect the original cable TV signal to both the

CABLE IN on the Cable Converter and the ANTENNA A plug on the rear of the PTV.

2 Connect the CABLE OUT on the Converter to the ANT. IN on the VCR.

Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the PTV.

Also connect the AUDIO OUT (R and L) jacks from the VCR to the

AUDIO IN jacks on thePTV.

ORE

PIP C

ONNECTIONS

REAR OF TV

The ANTENNA A signal input supplies the PTV’s

Main screen picture, and the AUX 1 VIDEO Input connection from the VCR serves as the picture source for PIP. Be sure to set the PTV’s PIP

SOURCE SELECT control to the “AUX 1

VIDEO” mode in order to display the Audio/Video

Input signals within the PIP window.

MART

ELP

Remember to use the Cable TV

Converter Box to select channels for

PIP, the VCR must be set to the same channel as the channel selection switch on the rear of the Cable Converter

(either channel 3 or

4).

AUDIO VIDEO CABLES

(RCA Plug Cables - optional)

SIGNAL

SPLITTER

Contact the Parts Information

Center 1 800 851-8885 to order any optional accessories

ANTENNA

OUT

ANTENNA

OUT OUT

VIDEO L AUDIO R

IN IN

CABLE OUT

CABLE IN

VCR

CABLE TV CONVERTER

IPS

OMETHING

ORKING

P lease make these simple checks before calling for service. These tips can save you time and money since charges for

PTV installation and adjustment of customer controls are not covered under your warranty.

No Power

No Picture

No Sound

Remote Does Not

Work

PTV Displays Wrong

Channel or No

Channels Above 13

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or

TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the pattern of the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

• Check the PTV power cord. Unplug the PTV, wait 1 minute, then reinsert plug into outlet and push POWER button again.

• Check to be sure outlet is not on a wall switch.

• Check antenna connections on the rear of the PTV. Are they properly secured to the antenna plug on the PTV?

• Check the CABLE TUNING control for correct position.

• Check Picture Source (A/V Button) for correct position ANT A or B; AUX 1/2/3

VIDEO; AUX 1/2 Y P

; etc. position without a signal source will result in a blank screen.

• Check the CLOSED CAPTIONS control. Some TEXT modes could block the screen.

• Check the VOLUME and MUTE buttons on the TV and remote.

• Check the TV SPEAKER NORMAL/OFF sound control for the correct position.

• If attempting auxiliary equipment hook-ups, check audio jack connections and that the auxiliary equipment is on and in the proper operating modes.

• Check AMP Switch on rear of TV. Place in INT(ernal) position for normal TV sound.

EXT(ernal) for optional Dolby ProLogic Surround Sound connections using the PTV’s speakers as Center channel.

• Check Device Selection button (Pronto remote touchscreen) for correct selected category product. HDR PTV for Widescreen PTV use and operation. Refer to the separate Pronto Remote Control Owner’s Manual for complete details.

• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary. Note the correct battery placement within the battery compartment.

• Clean the remote and the remote sensor window on the PTV.

• Repeat channel selection.

• Add desired channel numbers (ADD/DELETE CHANNELS control) into TV memory.

• Check CABLE TUNING control for correct position.

This TV is equipped with protective circuitry that shuts the TV off in case of moderate power surges. Should this occur turn the

TV back on by pressing the POWER button once or twice, or unplug and then replug the power cord at the AC outlet.

This feature is NOT designed to prevent damage due to high power surges such as those caused by lightning, which is not covered by your warranty.

Cleaning and Care

• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive- do not use household cleaners). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

• Specially designed screen cleaning kits are also available which contain anti-static cleaners and cloths designed to get into the ridges of the TV screen. If interested, ask your dealer about an optional Projection TV Screen Cleaning Kit or call our toll-free Accessory Parts ordering number 1-800-851-8885.

• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap or detergent. Use a clean dry cloth to dry the wiped surfaces.

• Occasionally vacuum the ventilation holes or slots in the cabinet back.

• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

G LOSSARY TO T ELEVISION T ERMS

Aspect Ratio * The proportions of a rectangular display

screen. NTSC television has a 4:3 ratio; HDTV is 16:9.

Audio/Video Inputs * Located on the rear of the TV

these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options.

Coaxial Cable * A single solid antenna wire normally

matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input found on the Television or VCR.

Display * An on screen message or graphics that help

the user operate and adjust TV feature controls. See On

Screen Displays (OSD).

HDTV * High Definition Television which offers

approximately twice the vertical/horizontal resolution of

NTSC video, and sound quality approaching that of compact disc. (Usually taken to mean a picture of 1920 x 1080 pixels in a 16:9 aspect ratio.)

Identify* Method by which a remote control searches

and finds an operating code for another product (such as a VCR or Cable Converter). Once the code has been

"identified" then the TV remote can operate and send commands to the other product.

LED * Light Emitting Diode or indicator.

Menu * An on-screen listing of feature controls shown

on the TV screen that are made available for user adjustments.

Multichannel Television Sound (MTS) * The

broadcast standard that allows for stereo sound to be transmitted with the TV picture.

NTSC * National Television Standards Committee

format devised for TV broadcasting signals in the 1940s

(525 lines; 30Hz.)

On Screen Displays (OSD) * Refers to the wording or

messages generated by the TV to help the user with specific feature controls (color adjustment, programming, etc.).

Picture -In-Picture (PIP) * Term used when two

pictures are shown on the TV screen at the same time.

The smaller PIP picture is supplied by a VCR (or other tuner/video playback source). The PIP picture can also be moved and swapped with the TV's main screen picture.

Programming * The procedure of adding or deleting

channel numbers into the TV’s memory circuits. In this way the TV “remembers’’ only the locally available or desired channel numbers and skips over any unwanted channel numbers.

Remote Sensor Window * A window or opening found

on the TV control panel through which infrared remote control command signals are received.

RGB * Red, Green, Blue color component inputs used

for connection purposes with personal computers (PCs) and other high definition video devices.

RF * Radio Frequency or modulated signal design used

as the carrier for television broadcasts.

Second Audio Program (SAP) * Another or additional

audio channel provided for in the Multichannel

Television Sound (MTS) broadcast standard. A monaural soundtrack included within the recorded or video signal (usually containing a second language translation for the displayed programming.)

Status * Allows the user to quickly confirm what

channel number is currently being viewed. Status can also be used to clear the TV of on-screen displays or information (rather than waiting for the displays to

“time out” or automatically disappear from the screen).

SVGA * Super Video Graphics Array

S-Video Input * Allows direct connection of high-

resolution video sources, such as a Super VHS videocassette recorder, Laser Disc player, etc. Provides improved picture resolution, sharpness, and clarity.

Twin Lead Wire * The more commonly used name for

the two strand 300 Ohm antenna wire used with many indoor and outdoor antenna systems. In many cases this type of antenna wire requires an additional adapter (or balun) in order to connect to the 75 Ohm Input terminals designed into the more recent Televisions and

VCRs.

Variable Audio Output * An adjustable audio output

which allows for volume variations at the source.

VGA * Video Graphics Array

Accessories/Optional...... 33-37, 38, 44, 49, *Q/U-1

Add/Delete Channels..........................13-14, *Q/U-2

Audio Controls .................................................27-32

Audio/Video Input ..................33-37, 44, 49, *Q/U-2

Automatic Programming .........................13, *Q/U-2

Auto Picture......................................................40-41

Auto Sound ............................................................42

Auto Surf................................................................43

Battery Installation.........................................*Q/U-3

Blocking Channels............................................19-20

Cable TV Connections/Settings.12, 44, 49, *Q/U-1, 2

Channel/Time Display .................15, 16, 17, *Q/U-3

Channel Label ........................................................25

Channel Memory................................13-14, *Q/U-2

Channel/Time Reminder ........................................18

Clock Setting..........................................................15

Closed Captioning..................................................11

Content Advisory..............................................19-24

Convergence ............................................................8

Controls/TV ...........................................*Q/U-2, 3, 4

Controls/Remote...................40-43, 46, *Q/U-2, 3, 4

Exit.................................................................*Q/U-4

Features ....................................................................5

First Time Set Up...........................................*Q/U-2

Inputs/Audio and Video........................33-37, 44, 49

Language..........................................................26, 39

Menu ..........................................................*Q/U-2, 4

Minus(-)/Plus (+) Buttons..........................*Q/U-3, 4

Monitor HD Features........................................38-39

I NDEX

Movie Ratings........................................................21

Parental Control................................................19-24

Parental Guidelines ................................................23

Picture-In-Picture (PIP)......................44-49, *Q/U-2

PIP Audio Output jacks ...................................31, 45

Programming Channels ...........................13, *Q/U-2

Remote Control ....................40-43, 46, *Q/U-2, 3, 4

Requesting Service .............................. 50, 53-54, 55

Reminder/Time and Channel .................................18

Safety/Precautions ...........................2, 3, 50, *Q/U-1

Second Audio Program (SAP) ...............................28

Sensor Remote ...............................................*Q/U-3

Sleep Timer ............................................................16

Surround Sound ................................................31-32

Speaker Terminals..................................................31

Time/Channel Display .............................18, *Q/U-3

Variable Audio Output .....................................31, 39

Video Enhancement .................................................7

VCR/TV Connections ............33-37, 44, 49, *Q/U-1

Tips for Service...........................................50, 53-54

TV Speaker Control .........................................31, 38

Volume Display................................................30, 38

Warranty.................................................................53

* Q/U indicates page number reference in the separate

Quick Use Guide

RENEWED

90 DAY

LIMITED WARRANTY

Hello! I am an AI chatbot specifically trained to assist you with the Philips 64PP 9751 HDTV Monitor คู่มือผู้ใช้. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts