Philips | CD6451B/17 | User's Manual | Philips CD6451B/17 User manual

CD645_IFU_US_English.book Page 1
Friday, August 3, 2007
5:10 PM
Register your product and get support at
www.philips.com/welcome
CD645
EN Digital Cordless Telephone
Warning
Use only rechargeable batteries.
Charge each handset for 24
hours before use.
!
CD645_IFU_US_English.book Page 2
Friday, August 3, 2007
5:10 PM
CD645_IFU_US_English.book Page 1
Friday, August 3, 2007
5:10 PM
Table of contents
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Important Safety Instructions
Safety information
Power requirements
Battery requirements
Telephone connection
Safety precautions
Warranty
Conformity
Environmental care
2
2.1
2.2
2.2.1
2.2.2
2.2.3
Your phone
What’s in the box
Overview of your phone
Handset
Display icons on the handset
Base station
6
6
7
7
9
10
3
3.1
3.2
3.3
Getting started
Connect the base station
Install rechargeable batteries
Place the handset on the charging
cradle
Configure your phone
How to power off or on the handset
power
11
11
11
Using your phone
Make a call
Predialing
Direct dialing
Call from the call log
Call from the phonebook
Call from the redial list
Call timer
Answer a call
Answer a call in handsfree mode
End a call
13
13
13
13
13
13
13
13
13
14
14
3.4
3.5
4
4.1
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
4.1.6
4.2
4.3
4.4
Table of contents
3
4
4
4
4
5
5
5
5
11
12
12
4.5
4.5.1
4.5.2
4.6
4.6.1
4.6.2
4.6.3
4.6.4
4.6.5
4.7
5
5.1
5.1.1
5.1.2
5.1.3
5.2
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.3
5.3.1
5.3.2
5.3.3
5.3.4
5.4
5.4.1
5.4.2
5.4.3
Recall
14
How to make a second call
14
How to answer a second call
14
How to use the intercom
14
How to make an internal call
14
How to transfer an external call to another
handset
15
How to make a 3-way conference call 15
Caller Line Identification (CLI)
15
Call waiting
15
How to find a handset
15
Use more of your phone
16
Call in progress
16
Mute/Unmute microphone
16
How to adjust earpiece volume
16
How to switch on the loudspeaker
16
Phonebook
16
How to store a number in the
phonebook
16
How to access the phonebook
16
How to edit a phonebook entry
16
How to delete a phonebook entry
17
How to delete all phonebook entries 17
How to store direct access memory 17
How to transfer the phonebook
17
Call log
17
How to access the call log
18
How to save call log entry to
phonebook
18
How to delete the call log entry
18
How to delete the entire call log
18
Redial list
18
How to access the redial list
18
How to save a redial list entry to
phonebook
19
How to delete a number from the redial
list
19
1
CD645_IFU_US_English.book Page 2
5.4.4
5.5
5.5.1
5.5.2
5.5.3
5.5.4
5.6
5.6.1
5.6.2
5.6.3
5.6.4
5.6.5
5.6.6
5.6.7
5.6.8
5.6.9
5.6.10
5.7
5.7.1
5.7.2
5.7.3
5.7.4
5.7.5
5.7.6
5.7.7
5.7.8
5.7.9
5.7.10
5.7.11
5.7.12
5.8
5.8.1
5.8.2
5.9
5.10
5.10.1
5.10.2
2
Friday, August 3, 2007
How to delete the entire redial list
19
Clock & alarm
19
How to set the time
19
How to set an alarm
19
How to set the alarm tone
19
How to set the date and time format 19
Personal settings
20
Handset tone
20
How to set a wallpaper to be displayed in
standby mode
21
How to adjust the contrast level
21
How to set the color theme of your
phone
21
How to rename the handset
21
How to set the auto pick-up
21
How to set the auto hang-up
21
How to set the menu language
21
How to turn on/off room monitoring 22
How to turn on/off the keypad
backlight
22
Advanced settings
22
How to select recall time
22
How to set the dial mode
22
Call barring
22
Baby call
23
How to manually select a base station 23
How to register an additional handset 23
How to unregister a handset
24
How to change the master PIN
24
How to reset to default settings
24
How to set the prefix number
24
Country setting
25
How to set conference mode on/off 25
Network services
25
Voice mail
25
Information services from network
operator
25
Games
26
How to enter text and number
26
Entering text and digit
26
Switching between lowercase and
uppercase
26
5:10 PM
6
6.1
6.5
6.6
6.6.1
6.6.2
6.6.3
6.6.4
6.6.5
6.6.6
Answering machine
27
Answering machine control keys on the
base station
27
How to turn on the answering
machine
27
How to turn off the answering
machine
28
How to listen to the new message(s)
and the old message(s)
28
How to delete all messages
28
Answering machine settings
29
How to set answering machine mode 29
How to set ring delay
30
How to set message tone
30
Remote control access
30
Call screening on Handset
31
Call screening on Base
31
7
Default settings
32
8
Menu structure
33
9
Technical data
36
10
Frequently asked questions
37
11
Index
39
12
FCC and IC statements
41
13
The RBRC® seal
43
6.2
6.3
6.4
Table of contents
CD645_IFU_US_English.book Page 3
Friday, August 3, 2007
5:10 PM
10 To reduce the risk of electric shock, do not
1
Important Safety
Instructions
Some of the following information may not apply
to your particular product; however, when using
telephone equipment, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock and injury to persons,
including the following :
1 Read and understand all instructions.
2 Follow all warnings and instructions marked
on the product.
3 Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for
cleaning.
4 Telephones should not be used while you are
in a bathtub, shower or pool. Immersion of
the telephone or handset in water could cause
an electrical shock.
5 Slots and openings in the cabinet back or
bottom are provided for ventilation, to
protect it from overheating. These openings
must not be blocked or covered. The
openings should never be blocked by placing
the product on the bed, sofa, rug, or other
similar surface. This product should not be
placed in a built-in installation unless proper
ventilation is provided.
6 This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
dealer or local power company.
7 Do not allow anything to rest on the power
cord. Do not locate this product where the
cord will be abused by persons walking on it.
8 Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
9 Never push objects of any kind into this
product through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind
on the product.
Important Safety Instructions
11
12
13
14
15
16
17
A
B
C
D
E
6
7
8
disassemble this product, but take it to a
qualified service personnel when service or
repair work is required. Opening or removing
covers may expose you to dangerous voltages
or other risks. Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
Do not expose the product to extreme
temperatures such as areas near a hot
radiator or stove or in a hot car.
Do not place lighted candles, cigarettes,
cigars, etc., on the telephone.
Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
Never install or modify telephone wiring
during a lightning storm.
Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
Use caution when installing or modifying
telephone lines to prevent electrical shock
and/or fire.
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
When the power supply cord or plug is
damaged or frayed.
If the product has been exposed to rain or
water.
If the product does not operate normally by
following the operating instructions.
If the product’s cabinet has been damaged.
If the product exhibits a distinct change in
performance.
Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric shock
from lightning.
Do not use the telephone to report a gas leak
in the vicinity of the leak.
Do not place this product on an unstable cart,
stand or table.The product may fall, causing
serious damage to the product.
3
CD645_IFU_US_English.book Page 4
Friday, August 3, 2007
IF YOUR PRODUCT UTILIZES BATTERIES,THE
FOLLOWING ADDITIONAL PRECAUTIONS
SHOULD BE OBSERVED :
1 Use only the type and size of battery(ies)
2
3
4
5
6
7
8
9
10
11
4
specified in the user manual.
Do not dispose of the battery(ies) in fire.
They may explode. Check with local codes for
possible special disposal instructions.
Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be
toxic if swallowed.
Exercise care in handling battery(ies) in order
not to short out the battery(ies) with
conducting materials such as rings, bracelets,
and keys.The battery(ies) or conductor may
overheat and cause burns.
Do not attempt to recharge the battery(ies)
provided with or identified for use with this
product that are not intended to be
charged.The battery(ies) may leak corrosive
electrolyte or explode.
Do not attempt to rejuvenate the battery(ies)
provided with or identified for use with this
product by heating them. Sudden release of
the battery(ies) electrolyte may occur causing
burns or irritation to eyes or skin.
When replacing battery(ies), all batteries
should be replaced at the same time. Mixing
fresh and discharged batteries could increase
internal cell pressure and rupture the
discharged battery(ies). (Applies to products
employing more than one separately
replaceable primary battery.)
When inserting battery(ies) into this product,
the proper polarity or direction must be
observed. Reverse insertion of battery(ies)
can cause charging, and that may result in
leakage or explosion.
Remove battery(ies) from this product if
storing over 30 days because the battery(ies)
could leak and damage the product.
Discard “dead” battery(ies) as soon as
possible since “dead” batteries are more likely
to leak in a product.
Do not store this product, or the battery(ies)
provided with or identified for use with this
product, in high temperature areas. Batteries
5:10 PM
that are stored in a freezer or refrigerator for
the purpose of extending shelf life should be
protected from condensation during storage
and defrosting. Batteries should be stabilized
at room temperature prior to use after cold
storage.
12 If your product uses rechargeable
battery(ies), charge the battery(ies) only in
accordance with the instructions and
limitation specified in the User Manual.
SAVE THESE INSTRUCTIONS
1.1
Safety information
This telephone is not designed for making
emergency telephone calls when the power fails.
An alternative should be made available for access
to emergency calling.
1.2
Power requirements
This product requires an electrical supply of 120
volts, single phase alternating current, excluding
IT installations defined in standard UL 60950.
1.3
Battery requirements
The handset requires power source of two
rechargeable NiMH batteries, size AAA 1.2V
750mAh (Hr11/45). IF THE INCORRECT TYPE
OF BATTERIES ARE USED, A WARNING
MESSAGE WILL BE DISPLAYED.
Use only Philips Multi-Life 750mAh rechargeable
NimH batteries.
For servicing or replacement, you can purchase a
suitable headset through service center or retail
shop.
! Warning
The electrical network is classified as dangerous
according to criteria in the standard UL 60950.
The only way to power down this product is by
unplugging the power supply from the electrical
outlet. Ensure the electrical outlet is located
close to the apparatus and is always easily
accessible.
1.4
Telephone connection
The voltage on the network is classified as TNV3 (Telecommunication Network Voltages, as
defined in the standard UL 60950). Following a
power cut, the call in progress is lost.
Important Safety Instructions
CD645_IFU_US_English.book Page 5
Friday, August 3, 2007
1.5
Safety precautions
• Do not allow the handset to come into contact
with liquids or moisture.
• Do not open the handset, base station or
charger.This could expose you to high voltages.
• Do not allow the charging contacts of the
charger or the battery to come into contact
with extraneous conductive materials.
• There is a slight chance that the telephone
could be damaged by an electrical storm. It is
recommended that users unplug the phone
from the USB socket and the phone line from
the phone wall socket during a storm.
• Do not use the handset in an explosive hazard
area such as where there is gas leaking.
• Young children should be supervised to ensure
that they do not play with the telephone.
• Because the phone works by sending radio
signals between the base unit and the handset,
wearers of hearing aids may experience
interference in the form of a humming noise.
• We advise that this phone should not be used
near intensive care medical equipment or by
persons with pacemakers.
• Your phone can interfere with electrical
equipment such as answering machines, TV and
radio sets if placed too close. It is
recommended that you position the base unit
at least one meter from such appliances.
! Warning
Use only the mains adapter supplied with this
telephone. Incorrect adapter polarity or voltage
can seriously damage the unit.
! Warning
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries; use
recommended type supplied with this telephone.
NiMH batteries must be disposed of in
accordance with the applicable waste disposal
regulations.
FCC CERTIFICATION NUMBER IS LOCATED
ON THE CABINET BOTTOM
The term „IC:“ before the certification number
signifies that Industry Canada technical
specifications were met. This certification means
that the equipment meets certain radio
communications and operational requirements.
Important Safety Instructions
5:10 PM
1.6
Warranty
This Class B digital apparatus complies with
Canadian ICES-003.
The warranty informations are available on
www.p4c.philips.com.
1.7
Conformity
The Declaration of conformity is available on
www.p4c.philips.com.
1.8
Environmental care
Please remember to observe the local
regulations regarding the disposal of
your packaging materials, exhausted
batteries and old phone and, where
possible, promote their recycling.
Philips has marked the packaging with standard
symbols designed to promote the recycling and
appropriate disposal of your eventual waste.
A financial contribution has been paid to
the associated national recovery &
recycling system.
The labeled packaging material is
recyclable.
5
CD645_IFU_US_English.book Page 6
2
Friday, August 3, 2007
5:10 PM
Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
2.1 What’s in the box
Handset
Base station
Power supply unit
Line cord (RJ11)
2 AAA Rechargeable
NiMH batteries
Belt clip
(Country dependent)
CD645
User manual
Warranty card
Quick Start Guide
Note
The line adaptor may not be attached to the line cord. You may find the line adapter in the box. In
this case, you have to connect the line adaptor to the line cord first before plugging the line cord to
the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power supply units
and additional rechargeable batteries.
6
Your phone
CD645_IFU_US_English.book Page 7
Friday, August 3, 2007
5:10 PM
2.2 Overview of your phone
2.2.1 Handset
A
B
C
D
E
Your phone
A Event LED
OFF: No new events
RED BLINKING: Unread events (example: a
missed call if you have subscribed the Caller
Line Identification Service (CLI) from your
network provider.)
B Left soft key
In idle mode: Press to enter the main menu
In other modes: Select the function displayed
on the handset screen directly above it
C Right soft key
In idle mode: Press to access the redial list
In other modes: Select the function displayed
on the handset screen directly above it
D Call log/Up key
In idle mode: Press to access call log
In menu mode: Press to scroll up the menu list
In phonebook/call log/Redial reviewing mode:
Press to scroll up to other entries
During call connection: Press to increase
earpiece volume
In editing mode: Press to go to the previous
character or digit
E Phonebook/Down key
In idle mode: Press to access phonebook
In menu mode: Press to scroll down the
menu list
In phonebook/call log/redial reviewing mode:
Press to scroll down to other entries
During call connection: Press to decrease
earpiece volume
In editing mode: Press to go to the next
character or digit
7
CD645_IFU_US_English.book Page 8
Friday, August 3, 2007
F
G
H
I
J
K
L
M
8
5:10 PM
F Talk off/Exit key
In idle mode: Long press for about 5 seconds
to power off the handset. If the handset is
powered off, short press to power on the
handset.
In menu mode: Long press to return to idle
mode, short press to return to previous
menu.
During call connection: Press to hang up a call
G Talk on/R key
In idle mode: Press to answer when there is
an incoming external or internal call
During call connection: Press to insert R for
operator services
H Alphanumeric keypad
I Hash key
In idle/dialing mode: Short press to insert a #
In idle mode: Long press to mute the ringer
In dialing mode: Long press to enter a pause
In editing mode: Short press to switch
between uppercase and lowercase
J Star/Format key
In idle/dialing mode: Short press to insert a *
In idle mode: Long press to activate or
deactivate keypad lock
In call log reviewing mode: Press repeatedly
to view the alternate dialing sequences
K Call Transfer/Intercom/conference
In idle mode: Short press to initiate an
intercom call
During external call connection: Short press
to initiate an internal call or switch call
between an internal call and an external call
Long press to initiate a conference call with
an external call and another internal call
L Loudspeaker key
During call connection: Press to switch the
loudspeaker on or off
M Headset jack (Country dependent)
Allow handsfree communication through the
headset by plugging the headset into the
headset jack
Your phone
CD645_IFU_US_English.book Page 9
Friday, August 3, 2007
5:10 PM
2.2.2 Display icons on the handset
Indicate battery level
Display
when the battery is fully discharged
Display
when the battery is running low
Display
when the battery is partially charged
Display
when the battery is fully charged
Display battery icon animation during charging
Display when the phone is in use. Blink when there is an external incoming call or when an
internal call is put on hold.
Blink when there is a missed call (This feature is available if you have subscribed the Caller
Line Identification service (CLI) with your network provider), or when voice mail messages
are received and not read yet.
Display when the telephone answering machine (TAM) is turned on. Blink when new TAM
messages are received.
Display when an internal call is connected. Blink when there is an incoming internal call or
when an internal call is put on hold.
Display when the alarm clock is turned on
Display when the loudspeaker is turned on
Display when the keypad is locked
Display when the ringer is turned off
Display when the handset is registered and within the range of the base station. Blink when
the handset is out of range or is searching for a base.
Your phone
9
CD645_IFU_US_English.book Page 10 Friday, August 3, 2007
5:10 PM
2.2.3 Base station
A
B
C
D
E
F
G
H
A Stop / Play key
Press to play the message (the first recorded
will be played first)
Press to stop message playback
B LED Message counter
When the answering machine is off:
-- steady: Indicate that the answering machine
is off
Fu and -- blink alternately: When the
message memory is full
09 and -- blink alternately: When there are
new messages (e.g. 09 is the total number of
messages in the memory)
When the answering machine is on:
00 Steady: Indicate that there is no message
02 Blinking: Display when new messages are
received (e.g. Two new messages are
received or one message is new and one
message is old).
02 Steady: Display number of old messages
(e.g. two old messages in the memory).
03 On for one second: Indicate the base
speaker volume level is 3 (six base speaker
volume levels from 00 to 05 are provided
where 00 means base speaker volume is off
and 05 has the highest speaker volume)
Ao Steady: Display when answer only mode
is selected
P1 Steady: Display when playing answer &
record outgoing message
P2 Steady: Display when playing answer only
outgoing message
rE Steady: Display when recording incoming
message
rA Steady: Blink when accessing line remote
10
C Answering machine ON/OFF key
Press to turn on or off the answering machine.
D Erase key
Delete current message during message
playback.
Long press to delete all the messages when
answering machine system is in standby
mode.
Note
Unread message will not be deleted.
E Repeat key
Press to go back to previous message
F Skip key
Skip to next message during message
playback
G + / - key
Increase (+) or decrease (-) speaker volume
during message playback
H Handset locator key
Press to locate the handset
Press and hold for three seconds to start
registration procedure
Your phone
CD645_IFU_US_English.book Page 11 Friday, August 3, 2007
5:10 PM
3 Connect the other end of the line cord to the
3
Getting started
telephone line socket and the other end of
the power cable to the electricity socket.
3.1 Connect the base station
Caution
Avoid placing the base station too close to large
metal objects such as filing cabinets, radiators or
electrical appliances. This can impair the range
and sound quality. Buildings with thick internal
and external walls may impair transmission of
signals to and from the base.
Warning
Power is applied when the power adaptor is
plugged into the unit and connected to the
electricity socket. The only way to power down
the unit is to unplug the power adaptor from the
electricity socket. Therefore, ensure that the
electricity socket is easily accessible.
!
The power adaptor and the telephone line cord
have to be connected correctly, as incorrect
connection could damage the unit.
Always use the telephone line cord supplied with
the unit. Otherwise, you may not get a dial tone.
1 Insert the plug of the power cord into the
socket under the base station.
Note
The line adaptor may not be attached to the line
cord. In this case, you have to connect the line
adaptor to the line cord first before plugging the
line cord to the line socket.
3.2 Install rechargeable batteries
Your CD645 is supplied with two rechargeable
batteries. Before using the handset, install the
batteries into the handset and fully charged them
up.
1 Slide out the battery cover
2 Place the batteries as indicated in the battery
compartment and replace the battery cover.
2 Insert the plug of the line cord into the socket
under the base station.
Getting started
3.3 Place the handset on the charging
cradle
Note
Charge the handset for at least 24 hours before
using it for the first time.
When the battery is fully charged, the talk time of
your phone is approximately 12 hours and the
standby time is approximately 150 hours.
1 Place the handset on the charging cradle of
the base station.
2 Leave it there until the batteries are fully
charged.
is
3 When the handset is fully charged,
displayed.
11
CD645_IFU_US_English.book Page 12 Friday, August 3, 2007
5:10 PM
3.4 Configure your phone
Depending on your country, the Welcome
screen may not appear. In that case, you do not
need to select the country code to configure your
phone.
Before using your phone, you need to configure it
according to the country of use. After charging it
for a few minutes, the Welcome screen appears.
Follow these steps to configure your phone:
1 Press < to display the list of countries
• Available country will display on the screen.
Note
If > is pressed, the handset will show the
Welcome screen again.
2 Press u/d to scroll to your country
3 Press < to confirm your selection
• Your phone is configured according to your
selected country and back to idle screen.
Note
Once the country is selected, the default line
settings for the selected country will be applied to
your phone automatically.
Tip
If you chose the country in use wrongly or would
like to change the country after the first
configuration, you can press < in idle mode to
enter into the main menu, input ##**793 to reset
to default settings. After around 30 seconds, the
phone will go back to Welcome screen and you
can select the country again.
3.5 How to power off or on the handset
power
You can power off your handset in order to save
battery power.
1 Press and hold e for about five seconds to
power off the handset
2 Press e to power on the handset again
12
Getting started
CD645_IFU_US_English.book Page 13 Friday, August 3, 2007
4
Using your phone
4.1 Make a call
4.1.1 Predialing
1 Enter the phone number (maximum 24 digits)
2 Press r to dial the number
• The call is initiated.
4.1.2 Direct dialing
1 Press r to take the line
2 Enter the phone number
•
The call is initiated.
4.1.3 Call from the call log
This feature is available if you have subscribed the
Caller Line Identification service (CLI) with your
network provider.
In idle mode:
1 Press u to select Call List
2 Press <
3 Press u/d to scroll to your desired
unanswered call
Note
The screen can either display:
• the caller’s number*
• the caller’s name (if matched with the
phonebook)*
• Unknown if it is an unidentified call**
• Availability of time and date information
depends on the service providers
* Subject to a subscription of CLI with your
operator
** Unlisted numbers, withheld caller
identification.
4 Press r to dial the number
• The call is initiated.
Note
The latest unanswered call will display first and
the oldest entry will be deleted when the
memory is full.
Using your phone
5:10 PM
4.1.4 Call from the phonebook
In idle mode:
1 Press d to access the phonebook
2 Press u/d to select your desired
phonebook entry
3 Press r to dial the number
•
The call is initiated.
Tip
Instead of pressing u or d to browse the
phonebook entries, press the numeric key
corresponding to the first letter of the
phonebook entry that you wish to locate when
you are in the phonebook menu. For example,
pressing 2 once will show the entries starting
with A. Pressing 2 twice will show the entries
starting with B.
4.1.5 Call from the redial list
In idle mode:
1 Press > to access the redial list
•
The display shows the last number dialed or the
name if the dialed number is matched with
number that stored in the phonebook.
2 Press u/d to scroll to your desired
entry
3 Press r to dial the number
• The call is initiated.
Tip
The handset stores the last 20 numbers dialed.
The last number dialed will appear first in the
redial list. If the redial number matches a
phonebook entry, the phonebook name will be
displayed instead.
4.1.6 Call timer
The call timer shows the duration of your current
call when you hang up your phone. It is shown in
minutes and seconds format (MM:SS).
4.2 Answer a call
When the phone rings, press r.
• The call is established.
13
CD645_IFU_US_English.book Page 14 Friday, August 3, 2007
4.3 Answer a call in handsfree mode
When the phone rings, press v.
• The call is established and
is on. You can talk
to the caller without holding the handset.
! Warning
When the handset rings during an incoming call,
please do not hold the handset too close to your
ear as the volume of the ringing tone may damage
your hearing.
Note
Incoming call has priority over other events.
Whenever there is an incoming call, other status
in progress such as phone settings, menu
navigation, etc will be aborted.
Tip
If auto pick-up mode is activated, you can lift up
the handset from its base station to answer the
call.
4.4 End a call
Press e during a call connection
• The call ends.
OR
Put the handset on to the base station
• The call ends.
4.5 Recall
To use this feature, you have to subscribe the
service with your local service provider.
You can use the recall function to make or
received a second call. The operations mentioned
in Section 4.5.1 and 4.5.2 may be varied by
countries and local service providers. Consult
the details of recall operation of this service from
your local service provider.
! Warning
Call back from the call list may not work for all
received numbers.
4.5.1 How to make a second call
During a call:
1 Press < and u/d to select Init. 2ND
Call
2 Press < to dial your second call number
•
14
5:10 PM
Note
You can press < and u/d to select
Switch Calls or Conference to switch calls
between the first and second calls or to make a
conference call.
4.5.2 How to answer a second call
To use this feature, you have to subscribe the
service with your local service provider. If
another call comes in during a call, you will hear
a short beep periodically.
During displaying caller ID, press < and u/
d to select functions to accept or reject the
second call.
Note
After accepting the second call, you can press
< and u/d to select Switch Calls or
Conference to switch calls between the first and
second calls or to make a conference call.
Note
If you have subscribed the Caller ID service, the
caller ID of your callers will appear on the display.
4.6 How to use the intercom
This feature is only available when there are at
least two registered handsets. It allows you to
make internal calls, transfer external calls from
one handset to another handset and make
conference calls.
4.6.1 How to make an internal call
In idle mode:
1 Press c
•
The handsets available for intercom will be
displayed.
2 Press u/d to select your desired
handset
3 Press < on the calling handset
• Your desired handset rings.
4 Press r on the called handset
• The intercom is established.
Note
If the called handset is busy, a busy tone will be
emitted from the calling handset.
The second call is initiated.
Using your phone
CD645_IFU_US_English.book Page 15 Friday, August 3, 2007
5:10 PM
During the conference call:
4.6.2 How to transfer an external call to
another handset
1 Press c to put the external call on hold and
During an external call:
1 Press c to initiate an internal call
• The handsets available for intercom will be
displayed and the external call is put on hold
automatically.
2 Press u/d to select your desired
handset
3 Press < to call your desired handset
• Your desired handset rings.
4 Press r on the called handset to start
intercom
Note
You can press c to switch the call between the
internal call and the external call.
5 Press e on the calling handset
• The calling handset transfers the external call to
the called handset.
•
4.6.3 How to make a 3-way conference call
The conference call feature allows one external
call to be shared with two handsets (in intercom).
The three parties can share the conversation and
no network subscription is required.
During an external call:
1 Press c to initiate an internal call
•
The handsets available for intercom will be
displayed and the external call is put on hold
automatically.
2 Press u/d to select your desired
handset
3 Press < to call your desired handset
• Your desired handset rings.
4 Press r on the called handset to start
intercom
Note
You can press c to switch the call between the
internal call and the external call.
5 Long press c on the calling handset
• The calling handset, called handset and the
external call would be in 3-way conference.
Using your phone
go back to internal call
The external call is put on hold automatically.
2 Press and hold c to establish the conference
call again
Note
Any handset hangs up during a conference call will
leave the other handset still in connection with
the external call.
4.6.4 Caller Line Identification (CLI)
Caller Line Identification (CLI) is a special service
that you may subscribe from your network
operator. If you have subscribed to CLI service
and provided that the identity of the caller is not
withheld, the number or name of the caller will be
displayed when the phone rings so that you may
decide whether to answer the call or not. Please
contact your network provider for more
information on this service.
4.6.5 Call waiting
If you have subscribed to Call Waiting service, the
earpiece will emit a beep tone to inform you that
there is a second incoming call. The number or
name of the second caller will also be displayed if
you have subscribed to Caller Line Identification
service (CLI). Please contact your network
provider for more information on this service.
To answer the second call, press r.
4.7 How to find a handset
You can locate the handset by pressing p on the
base station.
All the handsets registered to the base will
produce the paging tone and you can stop the
paging by pressing r/ e/ v/ > on the
handset or p on the base again.
15
CD645_IFU_US_English.book Page 16 Friday, August 3, 2007
5:10 PM
5 Press < to enter the number (maximum 24
5
Use more of your phone
5.1 Call in progress
Some options are available to you during a call.
You can access these options by pressing
corresponding key while a call is in progress. The
available options are:
5.1.1 Mute/Unmute microphone
During a call:
1 Press >
•
The microphone is turned off and Mute On is
displayed.
2 Press > again to turn on the microphone
5.1.2 How to adjust earpiece volume
During a call:
1 Press u/d to display the current
earpiece volume level
2 Press u/d to select earpiece volume
from Level 1 to Level 5
• The earpiece volume is adjusted and the phone
will go back to call connection screen.
5.1.3 How to switch on the loudspeaker
During a call:
Press v to activate loudspeaker mode
5.2 Phonebook
Your phone can store up to 200 phonebook
memories. A maximum of nine of the stored
phone numbers can be stored into the direct
access memories for you to access the frequently
used numbers directly. Each phone number can
have a maximum of 24 digits. If you have more
than one handset, each handset has its own
phonebook.
5.2.1 How to store a number in the
phonebook
In idle mode:
Press < to access the main menu
Press u/d to select Phonebook
Press < to select New Entry
Press < to enter the name (maximum 12
characters)
16
1
2
3
4
digits)
6 Press < to choose a group (<No Group>,
<Group A>, <Group B>, <Group C>)
7 Press < to save the entry
•
A beep tone is emitted and your phonebook entry
is saved.
Note
If you have subscribed the caller identification
service from your service provider, you can
assign a specific ringtone for each group. When a
call from that group calls you, you will hear the
designated ringtone of that group. You can also
assign individual contacts to specific groups of
your choice.
5.2.2 How to access the phonebook
In idle mode:
Press < to access the main menu
Press u/d to select Phonebook
Press < and u/d to select List Entry
Press < and u/d to scroll to your
desired phonebook entry
5 Press < to view the details of your desired
phonebook entry
Tip
In idle mode, you can press d to access your
phonebook, press u/d to select your
desired phonebook entry and press < view the
details of your selected phonebook entry.
1
2
3
4
5.2.3 How to edit a phonebook entry
In idle mode:
Press < to access the main menu
Press u/d to select Phonebook
Press < and u/d to select Edit Entry
Press < and u/d to choose the entry
that you want to edit
5 Press <
6 Press > to erase the letters one by one,
edit the name and press <
7 Press > to erase the digits one by one, edit
the number and press <
8 Press < to choose a group (<No Group>,
<Group A>, <Group B>, <Group C>)
9 Press < to save the entry
• A beep tone is emitted and your selected
phonebook entry is updated.
1
2
3
4
Use more of your phone
CD645_IFU_US_English.book Page 17 Friday, August 3, 2007
5.2.4 How to delete a phonebook entry
In idle mode:
1 Press < to access the main menu
2 Press u/d to select Phonebook
3 Press < and u/d to scroll to Delete
Entry
4 Press < and u/d to choose the entry
that you want to delete
5 Press < to confirm
•
A beep tone is emitted and your selected
phonebook entry is deleted.
5.2.5 How to delete all phonebook entries
1 Press < to access the main menu
2 Press u/d to select Phonebook
3 Press < and u/d to scroll to Delete
All
5:10 PM
6 Press < and u/d to select the
phonebook entry that you wish to store into
the selected direct access memory
7 Press < to confirm
• A beep tone is emitted and your phonebook entry
is saved into the selected direct access memory
key.
Tip
Long press the direct memory key will dial out
the phone number directly.
5.2.7 How to transfer the phonebook
This feature allows you to transfer the
phonebook from one handset to another handset
when there are at least two handsets registered
to your base station.
In idle mode:
4 Press < to confirm
5 Press < to reconfirm
• A beep tone is emitted and all your phonebook
entries are deleted.
1 Press < to access the main menu
2 Press u/d to select Phonebook
3 Press < and u/d to select Phbk
5.2.6 How to store direct access memory
You can store up to 9 direct access memories
(Key 1 to 9). A long press on the keys in idle
mode will automatically dial the stored phone
number.
Depending on your country, Key 1 and Key 2 may
be preset to the voice mail number and
information service number of your network
operator respectively. In this case, Key 1 and Key
2 will not display. If voice mail number and
information service number of your network
operator are unavailable, Key 1 and Key 2 will
display on top of Key 3 as the direct access
memory options, see Sections 5.9.2 and 5.9.3 for
details.
•
The handsets available for phonebook transfer
are displayed.
Note
If there are more than two handsets, you can
press u/d to select a specific handset.
5 Press <
6 The called handset will emit a beep tone and
prompt with a message “Transfer From:”
7 To accept the phonebook transfer, press <
on the called handset or press > to reject
the phonebook transfer
• All your phonebook entries are transferred to the
called handset and “Finish” is displayed on the
two handsets screen after the transferring is
done.
In idle mode:
5.3 Call log
This feature is available if you have subscribed the
Caller Line Identification service (CLI) with your
network provider.
Your phone can store up to 50 unanswered calls.
and the LED on the handset will blink to
remind you of any unanswered calls received. If
the identity of the caller is not withheld, the name
(or number) of the caller will be displayed. The
1 Press < to access the main menu
2 Press u/d to select Phonebook
3 Press < and u/d to scroll to Direct
Memory
4 Press < and u/d to scroll to a direct
access memory location from Key 1 to Key 9
5 Press < twice to select Add
Use more of your phone
Transfer
4 Press <
17
CD645_IFU_US_English.book Page 18 Friday, August 3, 2007
unanswered calls are displayed in chronological
order with the most recent unanswered call at
the top of the list.
! Warning
Call back from the call list may not work for all
received numbers.
5.3.1 How to access the call log
You can review the caller ID with alternate dialing
sequences. You can then make a call with the
selected dialing sequence directly or store this
number in your phonebook.
1 Press u to access the call log
2 Press < to enter Call List
• The latest unanswered call is displayed.
3 Press u/d to view the entries
5.3.1.1 To choose the format for call log
display
You must choose the correct format to dial the area
code and number of the call log record chosen. The
original incoming number from the call log will
appear as a 7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will automatically
appear in front of the 10-digit local calls.
1 When viewing the call log, press * to
change the format of the call log display as it
should be dialled from your location. For
example, if the call log entry appears as “234567-8900”:
• Press * twice to display “1-234-567-8900”
• Press * 3 times to display “1-567-8900”
• Press * 4 times to display “567-8900”
• Press * 5 times to display “234-567-8900”
again.
2 To dial the current displayed number, press
r key.
• The call is initiated.
5.3.2 How to save call log entry to
phonebook
In idle mode:
Press u to access the call log
Press < to enter Call List
Press u/d to select an entry
Press < to select Copy to Phbk
Press < to enter the name
1
2
3
4
5
18
5:10 PM
6 Press < to display the selected unanswered
call number and edit the number if necessary
7 Press < to choose a group (<No Group>,
<Group A>, <Group B>, <Group C>)
8 Press < to confirm
•
A beep tone is emitted and the selected call log
entry is saved into your phonebook.
5.3.3 How to delete the call log entry
In idle mode:
Press u to access the call log
Press < to enter Call List
Press u/d to select an entry
Press < and u/d to select Delete
Press < to confirm
• A beep tone is emitted and the selected call log
entry is deleted.
1
2
3
4
5
5.3.4 How to delete the entire call log
In idle mode:
Press u to access the calls log
Press < to enter Call List
Press u/d to select an entry
Press < to select Delete All
Press < to confirm
Press < to re-confirm
• A beep tone is emitted. All the entries in the call
log are deleted.
1
2
3
4
5
6
5.4 Redial list
Your phone can store the last 20 numbers your
have dialed. Only the first 24 digits of each
number are stored.
! Warning
Call back from the call list may not work for all
received numbers.
5.4.1 How to access the redial list
In idle mode:
1 Press >
•
The latest last number dialed is displayed at the
top of the list.
2 Press u/d to view other dialed
numbers
Use more of your phone
CD645_IFU_US_English.book Page 19 Friday, August 3, 2007
5.4.2 How to save a redial list entry to
phonebook
In idle mode:
Press > to access the redial list
Press u/d to select an entry
Press < to select Copy to Phbk
Press < to enter the name
Press < to display the selected redial
number and edit the number if necessary
6 Press < to choose a group (<No Group>,
<Group A>, <Group B>, <Group C>)
7 Press < to confirm
• A beep tone is emitted. The selected redial entry
was copied to your phonebook.
1
2
3
4
5
5.4.3 How to delete a number from the
redial list
1 Press > to access the redial list
2 Press u/d to select an entry
3 Press < and u/d to select Delete
4 Press < to confirm
• A beep tone is emitted and the selected entry is
deleted.
5.4.4 How to delete the entire redial list
Press > to access the redial list
Press < and u/d to select Delete All
Press < to confirm
Press < to reconfirm
• A beep tone is emitted and the entire redial list is
deleted.
1
2
3
4
5.5 Clock & alarm
5.5.1 How to set the time
Press < to access the main menu
Press u/d to select Clock & Alarm
Press < to select Set Date/Time
Press < to enter the current time (hh:mm)
in 24 hour format and the current date (dd/
mm/yy)
Note
To change the date and time format, see Section
5.6.4.
5 Press < to save the settings
1
2
3
4
Use more of your phone
5:10 PM
5.5.2 How to set an alarm
Press < to access the main menu
Press u/d to select Clock & Alarm
Press < and u/d to select Alarm
Press < and u/d to select Off, On
Once, or On Daily
Note
If you have selected On Once, or On Daily, enter
the time for the alarm
5 Press < to save the settings
Note
When the alarm is selected as On Once or On
will display on the screen.
Daily,
When the alarm is reached, the alarm tone will
sound and
will blink on the screen. You can
press e to mute the alarm tone.
1
2
3
4
5.5.3 How to set the alarm tone
1 Press < to access the main menu
2 Press u/d to select Clock & Alarm
3 Press < and u/d to select Alarm
Tone
4 Press < and u/d to choose your
desired alarm tone from Melody 1 to Melody 10
Note
The phone will play the corresponding melody
when browsing the melody list.
5 Press < to save the settings
5.5.4 How to set the date and time format
Press < to access the main menu
Press u/d to select Clock & Alarm
Press < and u/d to select Time/Date
Press < and u/d to choose the time
format display (12hr or 24hr)
5 Press < to confirm the time format display
settings
6 Press u/d to choose the date format
display (dd/mm or mm/dd)
7 Press < to confirm the date format display
settings
1
2
3
4
19
CD645_IFU_US_English.book Page 20 Friday, August 3, 2007
5:10 PM
5.6 Personal settings
4 Press < and u/d to select Group
5.6.1 Handset tone
5 Press < and u/d to scroll to your
Melody
desired group (Group A, Group B, Group C)
5.6.1.1 How to set the ring volume
Your phone provides five ringer volume levels
(one bar to five bars) and progressive ring volume
for you to choose.
! Warning
When the handset rings during an incoming call,
please do not hold the handset too close to your
ear as the volume of the ringing tone may damage
your hearing.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < to select Handset Tones
4 Press < to select Ring Volume
5 Press < and u/d to select your
desired volume level
6 Press < to save the settings
Tip
You can press and hold # to turn off the ringer.
will display.
5.6.1.2 How to set the ring melody
10 ring melodies are available on your handset.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < to select Handset Tones
4 Press < and u/d to select Ring
Melody
5 Press < and u/d to scroll to your
desired ring melody
6 Press < to save the settings
5.6.1.3 How to set the group melody
To benefit from this feature, you must subscribe
to the Caller Line Identification service.
This menu enables you to select and set the
melodies to be played when there is an external
incoming call from a contact whose name is
stored in your phonebook and is part of a group.
You can associate one ring melody to each group.
There are three phonebook groups (Group A, B,
C) available for you to organize your contacts.
Each group can be assigned a unique melody.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < to select Handset Tones
20
6 Press < and u/d to scroll to your
desired group melody
Note
The phone will play the corresponding melody
when browsing the melody list.
7 Press < to save the settings
5.6.1.4 How to turn on/off the key tone
A single beep is emitted when a key is pressed.
You can turn off or turn on the key beep. By
default, the key beep is On.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < to select Handset Tones
4 Press < and u/d to select Key Beep
5 Press < and u/d to select On or Off
6 Press < to save the settings
5.6.1.5 How to activate/deactivate the
keypad lock
1 Press and hold *
•
is displayed if keypad lock is activated.
1 Press and hold * again to deactivate the
keypad lock
•
is disappeared if keypad lock is deactivated.
Tip
You can also deactivate the keypad lock by
removing and replacing the batteries of the
handset.
5.6.1.6 How to turn on/off the first ring
If you have subscribed for Caller ID service with
your service operator, your phone can suppress
the first ring before the Caller ID. After resetting,
your phone will automatically detect if Caller ID
service is subscribed and start to suppress the
first ring. You can change this settings to suit your
preference.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < to select Handset Tones
4 Press < and u/d to select First Ring
5 Press < and u/d to select On or Off
6 Press < to save the settings
Use more of your phone
CD645_IFU_US_English.book Page 21 Friday, August 3, 2007
5.6.2 How to set a wallpaper to be
displayed in standby mode
There are three wallpapers pre-installed in your
phone. You can select your desired wallpaper to
be displayed in standby mode.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Wallpaper
4 Press < and u/d to scroll to your
desired wallpaper
5 Press < to save the settings
5.6.3 How to adjust the contrast level
There are five contrast level options (Level 1,
Level 2, Level 3, Level 4 or Level 5).
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Contrast
4 Press < and u/d to scroll to your
desired contrast level
Note
The contrast effect will display when browsing
different contrast levels.
5 Press < to save the settings
5.6.4 How to set the color theme of your
phone
There are four different color theme provided in
your phone. You can select your desired color
theme for displaying the menu screen.
1 Press < to access the main menu
2 Scroll u/d to select Personal Set
3 Press < to select Color Theme
4 Press < and u/d to scroll to your
desired color theme
Note
The corresponding color theme will display when
browsing the different color theme options.
5 Press < to save the settings
5.6.5 How to rename the handset
You can rename your handset and display the
handset name in idle mode.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Handset
5:10 PM
4 Press < to enter the handset name
Note
The maximum length of the handset name is 14
characters.
5 Press < to save the settings
5.6.6 How to set the auto pick-up
This function allows you to answer a call
automatically by lifting the handset from the base
station.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Auto Pickup
4 Press < and u/d to select On or Off
5 Press < to save the settings
5.6.7 How to set the auto hang-up
This function allows you to end a call
automatically by placing the handset on the base
station.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Auto
Hang-up
4 Press < and u/d to select On or Off
5 Press < to save the settings
5.6.8 How to set the menu language
Depending on your country, your handset display
can support different languages. After changing
the menu language, all the menus will be displayed
in the chosen language. For some of the
countries, your phone may not have this menu
language option if only one language is available.
This setting does not apply to the language of
outgoing message of the answering machine.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Language
4 Press < and u/d to choose your
desired language
5 Press < to save the settings
Note
Available languages for selection vary with
different countries
Name
Use more of your phone
21
CD645_IFU_US_English.book Page 22 Friday, August 3, 2007
5.6.9 How to turn on/off room monitoring
This feature allows you to monitor a room by
placing the handset in a room to be monitored.
The monitored handset will not ring when there
is an external incoming call or internal call. The
monitored handset will turn on the speaker
automatically if any other registered handsets
want to reach the monitored handset. Mute On
will appear in the screen of the calling handset by
press < when the internal call is set up. If the
calling handset want to talk to the monitored
handset, press < to unmute the microphone.
Note
You must have at least 2 handsets registered to
your base station in order to use this feature.
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Room
Monitor
5:10 PM
Press < to access the main menu
Press u/d to select Advanced Set
Press < to select Recall Time
Press < to select the recall time of your
country
Note
Number of available recall time options varies
with different countries.
5 Press < to confirm
1
2
3
4
5.7.2 How to set the dial mode
The default value for dial mode that is preset in
your phone should be the best suited for your
country network and therefore you do need to
change it.
There are two dial modes: Tone or Pulse.
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Dial Mode
4 Press < and u/d to select Tone or
4 Press < and u/d to choose On or Off
Pulse
5 Press < to save the settings.
5 Press < to save the settings
Note
If room monitor is set to On, Room Monitor On
will display on standby.
5.6.10How to turn on/off the keypad
backlight
1 Press < to access the main menu
2 Press u/d to select Personal Set
3 Press < and u/d to select Backlight
4 Press < and u/d to select On or Off
5 Press < to save the settings
Note
If there is no key press within 20 seconds, the
keypad backlight and LCD backlight will be turned
off automatically. Press any key can turn on the
keypad backlight. To turn on the LCD backlight,
press < or >.
5.7.3 Call barring
Call barring enables you to restrict selected
handsets from dialing a phone number beginning
with certain numbers. You can set up to four
different barring numbers, with each number
containing up to four digits.
Note
You will be required to enter the 4-digit master
PIN before you can activate or deactivate call
barring mode, add or modify call barring number.
5.7.3.1 How to set call barring mode on/
off
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Call
Barring
5.7 Advanced settings
4 Press < to enter the 4-digit master PIN
5.7.1 How to select recall time
Recall time is the time delay by which the line will
be disconnected after you press r. The default
value of recall time preset in your phone should
be the best suited for your country network. You
do not need to change it.
5 Press < to select Barring Mode
6 Press < to select On or Off
7 Press < to save the settings
22
when prompted (default master PIN is 0000)
Note
If barring mode is set to on, Call Barr On will
display on idle screen.
Use more of your phone
CD645_IFU_US_English.book Page 23 Friday, August 3, 2007
5.7.3.2 How to modify call barring
number
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Call
Barring
4 Press < to enter the 4-digit master PIN
5:10 PM
5.7.4.3 How to change baby call number
Press < to access the main menu
Press u/d to select Advanced Set
Press < and u/d to select Baby Call
Press < and u/d to select Number
Press < to enter the number
Press < to save the settings
1
2
3
4
5
6
when prompted (default master PIN is 0000)
5 Press < and u/d to select Barring
Number
6 Press < to choose a number (Number 1,
Number 2, Number 3, Number 4)
7 Press < to enter the number
8 Press < to save the settings
Note
If a restricted number is dialed, the call will not be
connected. When this happens, the phone emits
an error tone and returns to idle mode.
5.7.4 Baby call
When activated, the Baby Call feature enables
you to dial the selected number by pressing any
key on your handset. This feature is very useful
for direct access to emergency services.
Note
You can enter up to 24 digits for baby call
number.
5.7.4.1 How to activate baby call mode
Press < to access the main menu
Press u/d to select Advanced Set
Press < and u/d to select Baby Call
Press < to select Mode
Press < and u/d to select On
Press < to save the settings
• The message “BabyCall On” will display on the
idle screen.
1
2
3
4
5
6
5.7.4.2 How to deactivate baby call mode
1 Press and hold < (when Baby Call mode
has been activated before).
2 Press u/d to select Off
3 Press < to save the settings
•
The message “BabyCall On” will disappear on
the idle screen.
Use more of your phone
5.7.5 How to manually select a base
station
One CD645 handset can register up to four
different CD645 base stations.
1 Press < to access the main menu
2 Scroll u/d to select Advanced Set
3 Press < and u/d to select Base
Selection
4 Press < and u/d to select your
desired base station
5 Press < to confirm
5.7.6 How to register an additional
handset
The procedures described below are the
procedures that you will find in your handset. The
procedures may very according to the handset
you want to register. In this case, please refer to
the manufacturer of the additional handset.
Additional handsets must be registered to the
base unit before you can use them. Up to 5
handsets can be registered to one base station.
The Master PIN is required before you can
register or unregister handsets.
1 Press < on the handset to access the main
menu
2 Scroll u/d to select Advanced Set
3 Press < and u/d to select
Registration
4 Press < and u/d to select your
desired base station
Note
The registered base station is marked with an
asterisk at the rightmost of the display.
5 Press < and enter the 4-digit master PIN
when prompted (default master PIN is 0000)
6 Press p on the base station for more than
three seconds until you hear a beep tone.
Now the base station is ready to register the
new handset.
23
CD645_IFU_US_English.book Page 24 Friday, August 3, 2007
7 Press < on the handset to validate the PIN
code.
8 "Waiting..." is displayed on the screen
• A beep tone is emitted from the handset to
indicate successful registration and the screen
returns to idle screen.
Note
If the base is found and the PIN is correct, the
unused handset numbers will be assigned
automatically.
If the PIN is incorrect, Wrong PIN ! will be
displayed with an error tone, and the handset
returns to idle mode.
If no base is found within a certain period, No
Base found! would be displayed with an error
tone, and the handset returns to idle mode.
5.7.7 How to unregister a handset
Press < to access the main menu
Press u/d to select Advanced Set
Press < and u/d to select Unregister
Press < to enter the 4-digit master PIN
when prompted (default master PIN is 0000)
5 Press < and u/d to select your
desired handset
6 Press < to confirm
• A beep tone is emitted from the handset to
indicate the handset unregistration is successful
and the screen shows Unregistered and back to
idle screen.
Note
If there are no key presses within 15 seconds, the
unregistration procedure will be aborted and the
handset will return to idle mode.
1
2
3
4
5.7.8 How to change the master PIN
The Master PIN is used for setting call barring,
resetting your handset and for registration/
deregistration of handsets. The default PIN is
0000. The length of the PIN is four digits. This
PIN is also used to protect the settings of your
handset. Your handset will prompt you whenever
the PIN is required.
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Change
PIN
4 Press < to enter the 4-digit master PIN
5:10 PM
5 Press < to enter the new 4-digit PIN
6 Press < to enter the new 4-digit PIN again
for reconfirmation
7 Press < to save the settings
Note
The default product PIN code is preset to 0000.
If you change this PIN code, keep the PIN details
in a safe place where you have easy access to
them. Do not lose the PIN code.
5.7.9 How to reset to default settings
You can reset your phone to the default settings
(see Section 5.7). After a reset, all your personal
settings and call log entries will be deleted, but
your phonebook remains unchanged.
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Reset
4 Press < to enter the 4-digit master PIN
when prompted (default master PIN is 0000)
5 Press < confirm
6 Press < to reconfirm
• A beep tone is emitted and the screen returns to
welcome screen. Your phone is reset to its default
settings.
• Some of the countries may not have welcome
screen and your phone will return to idle screen
after reset.
5.7.10How to set the prefix number
This feature allows you to set the phone to use
the cheapest operator prefix. Once the prefix
number is set, it is automatically inserted at the
beginning of each number dialed out.
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Auto Prefix
4 Press < to enter the detect digits
• The last stored detect digits are displayed.
Note
The maximum length of detect digits is 5 digits.
5 Press < to enter the auto prefix number
• The last stored auto prefix number is displayed.
Note
The maximum length of auto prefix number is 10
digits.
6 Press < to save the settings
when prompted
24
Use more of your phone
CD645_IFU_US_English.book Page 25 Friday, August 3, 2007
5.7.11Country setting
The availability of this menu is dependent on your
country.
You can select another country different from
the one chosen during welcome mode.
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select Country
4 Press < and u/d to select your
country
5 Press < to confirm your selection
Note
Once the country is selected, the default line
settings for the selected country will be applied to
your phone automatically.
5.7.12How to set conference mode on/off
When conference mode is activated, you can
initiate a three-party conference call with a
second handset registered to your base station
automatically if the second handset takes the line
when there is already an external call in progress.
1 Press < to access the main menu
2 Press u/d to select Advanced Set
3 Press < and u/d to select
Conference
4 Press < to select On or Off
5 Press < to save the settings
5.8 Network services
This menu provides a convenient means for you
to access, activate or deactivate some network
services that are country/subscription dependent.
Contact your network provider for more
information about these services.
The default numbers and values that are preset in
your phone should be the best suited for your
country network and therefore you do not need
to change them.
5.8.1 Voice mail
Depending of your country, the voice mail feature
may not be available. This feature allows the caller
to leave a voice message when you are unable to
take a call yourself. The availability of this
feature is dependent on your country and
Use more of your phone
5:10 PM
your subscription with your network
provider. These voice messages are stored by
the network rather than in your handset itself.
Contact your network provider for more
information about this feature.
5.8.1.1 How to activate voice mail
Press < to access the main menu
Press u/d to select Net. Service
Press < and u/d to select Voice Mail
Press < and u/d to select Activate
The number string for voice mail service is
dialed.
6 When the number has been dialed, press e
to return to idle mode
1
2
3
4
5
5.8.1.2 How to set up voice mail number
Press < to access the main menu
Press u/d to select Net. Service
Press < and u/d to select Voice Mail
Press < and u/d to select Settings
Press < to enter the number
Press < to save the settings
Tip
When a voice mail number is set, press and hold
1 will dial out to the voice mail number directly.
1
2
3
4
5
6
5.8.2 Information services from network
operator
Depending of your country, the info feature may
not be available. This feature allows the caller to
listen to information provided by your network
provider. The availability of this feature is
dependent of your country and your
subscription with your network provider.
This info are stored by the network rather than
in your handset itself. Contact your network
provider for more information about this feature.
5.8.2.1 How to activate info
Press < to access the main menu
Press u/d to select Net. Service
Press < and u/d to select Info
Press < and u/d to select Activate
When the number has been dialed, press e
to return to idle mode
1
2
3
4
5
25
CD645_IFU_US_English.book Page 26 Friday, August 3, 2007
5.8.2.2 How to set up info number
1 Press < to access the main menu
2 Scroll u/d to select Net. Service
3 Press < and u/d to select Info
4 Press < and u/d to select Settings
5 Press < to enter the number
6 Press < to save the settings
Tip
When an info number is set, press and hold 2
will dial out to the info number directly.
5.9 Games
Two games (Tetris and Snake) are pre-installed in
your phone for you to play around.
1 Press < to access the main menu
2 Press u/d to select Games
3 Press < and u/d to select your
desired game
4 Press <
• The instruction screen is displayed.
5 Press < to start the game.
Note
During the game, you can press 2 / 4 / 6 /
8 to move up / left / right / down respectively.
You can also press > or e to quit the game
and back to Games menu, press < to pause the
game and press any of 2 / 4 / 6 / 8 to
resume the game.
5:10 PM
For example, to enter the name “PETER” in
editing mode:
P
Press 7 once:
E
Press 3 twice:
T
Press 8 once:
Press 3 twice:
E
Press 7 three times: R
5.10.2Switching between lowercase and
uppercase
By default, all characters entered will be in
uppercase. You can press # to switch between
uppercase and lowercase letters.
5.10 How to enter text and number
5.10.1Entering text and digit
You can enter the names of your phonebook
entries characters by character by pressing the
relevant key once or several times to reach the
desired character.
Key Assignment
1
space 1 @ _ # = < > ( ) & £ $ ¥ €[ ] { }
2
abc2àäçåæ
3
def3éè∆Φ
4
ghi4ìΓ
5
jkl5Λ
6
mno6ñòö
7
pqrs7βΠΘΣ
8
tuv8ùü
9
wxyz9øΩΞΨ
0
.0,/:;"'!¡?*+-%\^~|
26
Use more of your phone
CD645_IFU_US_English.book Page 27 Friday, August 3, 2007
6
5:10 PM
Answering machine
Your CD645 includes a telephone answering machine that records unanswered calls when it is on.
The LED message counter (two digits seven segment display) on the base will show the number of the
messages when the answering machine is on.
The answering machine can store up to 99 messages within the maximum recording time of
approximately 30 minutes.
6.1 Answering machine control keys on the base station
Buttons on the Description
base station
o
Press to turn on/off the answering machine
P
Press to play the message or stop the message playback
x
Press to delete the current message
Press and hold for two seconds to delete all the old messages in idle mode
l
Press to go back to previous message if it is pressed within one second of current
message playback
Press to replay current message if it is pressed after one second of current
message playback
R
Press to skip the current message and play the next message
V
Increase (+) or decrease (-) speaker volume during message playback
p
Press to locate the handset
Press and hold for more than three seconds to start registration procedure
6.2 How to turn on the answering machine
You can turn on the answering machine either through the base or the handset.
Through the base:
1 Press o to turn off the answering machine.
•
displays on the handset screen and number of messages displays on the base LED.
Through the handset:
Press < and u/d to select Answer Machine
Press < and u/d to select Answer On/Off
Press < and u/d to select On
Press < to confirm
•
displays on the handset screen and number of messages displays on the base LED.
1
2
3
4
Answering machine
27
CD645_IFU_US_English.book Page 28 Friday, August 3, 2007
6.3 How to turn off the answering
machine
You can turn off the answering machine either
through the base or the handset.
Through the base:
1 Press o to turn off the answering machine.
•
disappears on the handset screen and -displays on the base LED.
Through the handset:
1 Press < and u/d to select Answer
Machine
5:10 PM
•
The new messages in the sequence they are
recorded are played from the speakerphone on
the handset.
Note
If there are no messages in your answering
machine, No messages! will display on the handset
screen and return to previous screen.
Available functions during message playback:
Adjust volume
Press u/d key
Stop playback
Press > to stop current
playback and return to Play
menu, or press e to stop
playback and return to idle.
Repeat
Press <, press u/d to
select Repeat and press <.
Next message
Press <, press u/d to
select Forward and press <.
2 Press < and u/d to select Answer
On/Off
3 Press < and u/d to select Off
4 Press < to confirm
•
disappears on the handset screen and -displays on the base LED.
6.4 How to listen to the new message(s)
and the old message(s)
When new messages are recorded on the
answering machine,
is flashing on the handset
display and the LED on base blinks until all the new
messages are played. Old messages will be played
after all new messages are played completely and
remains steadily on and the message counter
LED stays steady to indicate the number of old
messages stored in the answering machine.
Listen to new messages through the base:
1 Press P to start playing the new
messages
• The new messages in the sequence they are
recorded are played from the loudspeaker on the
base station.
2 Press V to adjust the loudspeaker
volume during message playback.
Note
Five levels of loudspeaker volume are available.
Previous message Press <, press u/d to
select Previous and press
<.
Delete the
Press <, press u/d to
current message select Delete and press <
Switch the
Press v
playback between
the earpiece and
the speaker
Tip
You can also access the answer machine feature
by pressing u in idle mode, press u/d to
select TAM, press < to select Play. Press <
to start playing the messages.
6.5 How to delete all messages
Press < to access the main menu
Press u/d to select Answer Machine
Press < and u/d to select Delete All
Press < to confirm
Press < to reconfirm deletion of all your
messages.
Note
Unread messages cannot be deleted.
1
2
3
Listen to new messages through the handset: 4
1 Press < and u/d to select Answer
5
Machine
2 Press < to select Play
3 Press < to start playing new messages (if
there are messages received)
28
Answering machine
CD645_IFU_US_English.book Page 29 Friday, August 3, 2007
6.6 Answering machine settings
Use the answering machine menu through the
handset to change the settings of the answering
machine.
6.6.1 How to set answering machine mode
By default the answer machine is set in Answer &
Record mode (message can be left by the callers),
this can be change to Answer Only (no message
can be left by the callers.Your correspondent will
be prompted to call back later.).
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < and u/d to select Settings
4 Press < to select Answer Mode
5 Press < to select Answer & Record or
Answer Only
6 Press < to save the settings
Note
You can then set your own personalized outgoing
message or predefined outgoing message in
Section 6.6.1.1.
6.6.1.1 How to set outgoing message
The answering machine announces the outgoing
message when it answers the call. There is a
default outgoing message. You can also record
your own outgoing message. When you record
your own outgoing message, it will be used when
the answering machine answers the call. If your
own outgoing message is deleted, the default
outgoing message will be restored automatically.
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < and u/d to select Ans.
5:10 PM
If Predefined is selected, you can choose to play
messages or change the language. See Sections
6.6.1.1.2 for details.
6.6.1.1.1 Personalize your outgoing
messages
If you set your outgoing message as Personalized,
press u/d to access the following options:
Options available Description
for Personalized
Outgoing
Messages
Play Messages*
Press < to playback
existing outgoing messages
(if any)
Record
Messages**
Press < to start recording
the outgoing message, press
< to stop and save the
recording and play back the
recorded outgoing message
Note
The maximum length of an
outgoing message is 60
seconds.
Delete Messages Press < to delete the
outgoing message
Note
* If there is no existing personalized outgoing
message, the screen will display No Messages! and
return to the previous menu.
** When you record a new personalized outgoing
message, the previous one is overwritten
automatically.
Settings
4 Press < to select Answer Mode
5 Press < to select Answer & Record or
Answer Only
6 Press < and u/d to set your outgoing
message as Predefined or Personalized
7 Press < to confirm
Note
If Personalized is selected, you can choose to
play, record or delete messages. See Section
6.6.1.1.1 for details.
Answering machine
29
CD645_IFU_US_English.book Page 30 Friday, August 3, 2007
6.6.1.1.2 Use the predefined outgoing
message
If you set your outgoing message as Predefined,
press u/d to access the following:
Options
available for
Predefined
Outgoing
Messages
Description
Languages*
Press < and u/d to
select your desired outgoing
message language
Play Messages Press < to play back the
predefined outgoing message.
Note
* Depending on your country, your phone may
have only one outgoing message language.
6.6.2 How to set ring delay
You can set the number of rings before the
answering machine answers and starts playing
your greeting message. You can set the answering
machine to answer after three to eight rings or
economy.
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < and u/d to select Ans.
Settings
4 Press < and u/d to select Ring Delay
5 Press < and u/d to select the
number of rings from 3 rings to 8 rings or
Economy
6 Press < to save the settings
Note
Economy mode can save you the cost of a longdistance call when you check your messages
remotely. If there are new messages in your
answering machine, the outgoing message will
start playing after three rings. If there are no new
messages, the outgoing message will be played
after five rings. Hence, if you want to check if you
have any messages without incurring call charges,
you can hang up the call after the fourth ring.
5:10 PM
6.6.3 How to set message tone
An alert tone sounds periodically when there is
new message. You can turn on or off this
message alert tone. The default setting is Off.
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < to select Ans. Settings
4 Press < to select Message Tone
5 Press < to select On or Off
6 Press < to save the settings
6.6.4 Remote control access
This feature lets you check your messages, or
otherwise operate your answering machine, by
calling the answering machine when you are away
from home on a tone dialing phone.
6.6.4.1 How to change remote access PIN
Your phone lets you check your messages or
operate your answering machine by entering a 4digit remote access PIN on a tone-dialing phone.
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < and u/d to select Ans.
Settings
4 Press < and u/d to select Change
PIN
5 Press < to enter the default/current 4-digit
remote access PIN when prompted (Default
remote access PIN is 0000)
6 Press < to enter the new remote access
PIN
7 Press < to enter the new remote access
PIN again
8 Press < to save the settings
6.6.4.2 How to activate/deactivate
remote access
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < and u/d to select Ans.
Settings
4 Press < and u/d to select Remote
Acc.
5 Press < and u/d to select Activate or
Deactivate
6 Press < to save the settings
30
Answering machine
CD645_IFU_US_English.book Page 31 Friday, August 3, 2007
6.6.4.3 How to remotely access your
answering machine
1 Place a call from your external phone to your
CD645
2 When the answering machine answers the
call and starts playing the outgoing message,
press # to enter #
3 Enter the 4-digit remote access PIN
Note
If the PIN is correct, recorded messages would be
played back automatically.
However, if the PIN is incorrect, an error tone
would be heard, you can retry to enter the
remote access PIN again.
If retry PIN is still incorrect, the answering
machine will drop the line immediately.
If there are messages, all the new messages will be
played immediately and then old messages will be
played after a long beep.
4 Press the following keys to carry out the
desired function
Keys
Description
1
Skip to the previous message
2
Play the message
3
Skip to the next message
6
Delete the playing message
7
Turn on the answering machine
8
Stop message playback
9
Turn off the answering machine
#
Enter the remote access code if the
answering machine is on and outgoing
message is playing.
5:10 PM
6.6.5 Call screening on Handset
If Call screening is set to On, when there is an
incoming message, you can press < to start call
screening. If you decide to pick up the call, press
r. Once the call has been picked up, the
recording will stop automatically.
1 Press < to access the main menu
2 Press u/d to select Answer Machine
3 Press < and u/d to select Ans.
Settings
4 Press < and u/d to select Screening
5 Press < to select On or Off
6 Press < to save the settings
Note
During call screening, user cannot stop the call
screening, only r and u/d on handset can
be used.
6.6.6 Call screening on Base
When the answering machine picks up the call,
call screening on base will be turned on if the
volume level is not at 00. You can press V to
turn the base volume level to 00 to turn off the
call screening on base.
Note
If the answering machine is off, the phone will
enter into the remote access mode after 10 rings.
User can then enter the 4-digit remote access
PIN (default is 0000) to activate the remote
access feature.
Answering machine
31
CD645_IFU_US_English.book Page 32 Friday, August 3, 2007
7
5:10 PM
Default settings
Items
Default values
Handset name:
PHILIPS
Date:
--.--
Time:
--:--
Earpiece volume:
Level 3
Ring melody:
Melody 1
Ring volume:
Level 3
Alarm:
Off
Alarm ringer melody:
Melody 1
Key tone:
On
Auto pick-up:
Off
Auto hang-up:
On
First ring:
On
Contrast level:
Level 3
Wallpaper:
Wallpaper 1
Color theme:
Color 1
Keypad Backlight
On
Room Monitor:
Off
Language:
Country dependent
Recall time:
Country dependent
Barring mode:
Off
Dial mode:
Tone
Baby call mode:
Off
Master PIN:
0000
Conference mode:
Off
Answer Machine:
On
Answer mode:
Answer & Record
Ring delay:
6 Rings
Message tone:
Off
Remote access:
Activate
Remote access PIN:
0000
Call screening:
On
Base speaker volume: 03
32
Default settings
CD645_IFU_US_English.book Page 33 Friday, August 3, 2007
8
5:10 PM
Menu structure
The table below describes the menu tree of your phone.
Phonebook
New Entry
List Entry
Edit Entry
Delete Entry
Delete All
Direct Memory
Key 1
...
Key 9
* Key 1 and Key 2 may not appear as these
options are country dependent
Phbk transfer
Clock & Alarm
Set Date/Time
Enter date and time
Alarm
Off
On Once
On Daily
Alarm Tone
Melody 1
Melody 2
Melody 3
Time/Date
12hr
dd/mm
24hr
dd/mm
Ring Volume
One bar
mm/dd
mm/dd
Personal Set
Handset Tones
Two bars
Three bars
Four bars
Five bars
Progressive
Ring Melody
Name of the melody 1
...
Name of the melody 10
Group Melody
Group A
Name of the melody
Group B
Name of the melody
Group C
Name of the melody
Key Beep
On
First Ring
On
Off
Off
Wallpaper
Wallpaper 1
Wallpaper 2
Wallpaper 3
Wallpaper off
Menu structure
33
CD645_IFU_US_English.book Page 34 Friday, August 3, 2007
Personal Set
Contrast
5:10 PM
Level 1
Level 2
Level 3
Level 4
Level 5
Color Theme
Color 1
Color 2
Color 3
Color 4
Handset Name
Auto Pick-up
On
Off
Auto Hang-up
On
Off
Language
Room monitor
List of languages
On
Off
Backlight
On
Off
Advanced Set
Recall Time
Dial Mode
Tone
Pulse
Call Barring
Barring Mode
On
Off
Barring Number
Number 1
Number 2
Number 3
Number 4
Baby Call
Mode
On
Off
Number
Base Selection
Base 1
Base 2
Base 3
* Only display the subscribed base stations.
Base 4
Registration
Unregister
Change PIN
Reset
Auto Prefix
Country
Conference
List of available countries
Off
On
34
Menu structure
CD645_IFU_US_English.book Page 35 Friday, August 3, 2007
Net. Service
Voice Mail
5:10 PM
Activate
Settings
Info
Activate
Settings
Games
Tetris
Snake
Answer Machine
Play
During playback
Repeat
Forward
Previous
Delete
Delete all
Answer On/Off
On
Off
Ans. Settings
Answer Mode
Answer Only
Predefined
Language
Play Messages
Personalized
Play Messages
Record Messages
Delete Messages
Answer & Record
Predefined
Language
Play Messages
Personalized
Play Messages
Record Messages
Delete Messages
Ring Delay
3 Rings
4 Rings
5 Rings
6 Rings
7 Rings
8 Rings
Economy
Message Tone
On
Off
Change PIN
Remote Acc.
Activate
Deactivate
Screening
On
Off
Menu structure
35
CD645_IFU_US_English.book Page 36 Friday, August 3, 2007
9
5:10 PM
Technical data
Display
• 5-Line Color Graphical LCD
• 16 characters per line
• Keypad backlight
General telephone features
• GAP compliant
• Up to five multi-handset registration at a single
base station
• Up to four multi-base registration
• Intercom between handsets
• External/Internal call transfer between
handsets
• 3-way conference (two internal calls and one
external call)
• Handset paging from base station
• Caller name and number identification
• 10 polyphonic melodies
• Distinctive group ringing
• Baby call
• Alarm
• Keypad lock
Battery
• Two rechargeable AAA NiMh 750mAh
batteries
Weight and dimensions
• Handset: 161 grams
• Base: 198 grams
• Handset: 160.6mm x 46.2mm x 29.2mm
(HxDxW)
• Base: 116mm x 108.9mm x 82.3mm (HxDxW)
Temperature range
• Operation: 0ºC to +40ºC
• Storage: -25ºC to +66ºC
Relative humidity
• Operation: Up to 80% at 40ºC
• Storage: Up to 80% at 40ºC
Contact list
• 200 contacts
• 12 characters (at max.) for name and 24 digits
(at max.) for each contact
Call list
• 50 unanswered calls
Redial list
• 20 last numbers dialed
• 24 digits (at max.) for each entry
Answering machine
• Answer and record mode
• Answer only mode
• Predefined outgoing message
• Personalized outgoing message
• Approximately 30 minutes recording time in
total
• Remote access control
36
Technical data
CD645_IFU_US_English.book Page 37 Friday, August 3, 2007
Frequently asked questions
ENGLISH
10
5:10 PM
www.philips.com/support
In this chapter you will find the most frequently
asked questions and answers about your phone.
Connection
The
appears soon after the batteries
are charged.
• Replace the batteries with new ones (use only
RECHARGEABLE batteries)
The handset does not switch on!
• Charge the battery: Put the handset on
charger. After a few moments the phone will
switch on.
• Check the charger connections
• Use only the SUPPLIED
RECHARGEABLE BATTERIES.
Set-up
The phone does not work at all.
• Make sure that the adaptor and the phone cord
are connected properly
• Check that the batteries are fully charged and
installed properly
• This phone does not work during power failure
The Call Waiting call cannot be answered.
• Check with your local phone company and
select the correct recall duration
Communication is lost during a call!
• Charge the battery
• Move closer to the base station
Poor audio quality
• Move closer to the base station
• Move the base station at least one meter away
from any electrical appliances
No dialing tone
• Check the connections. Reset the phone:
unplug and plug back in the mains.
• Charge the batteries for at least 24 hours
• Move closer to the base station
• Use the line cable provided
• Connect the line adaptor (when needed) to the
line cord
The
is blinking.
• Move closer to the base station
• Check battery level
• Register the handset to the base station
Frequently asked questions
Caller ID does not work properly.
• Check with your local phone company that the
CID service is subscribed to
• Let the phone ring at least once before
answering
The handset LCD displays nothing.
• Try again by disconnecting and connecting the
base station power supply and follow the
procedure to register a handset (see Section
5.8.6)
• Make sure the two supplied rechargeable
batteries have been inserted properly into the
battery compartment
• Remove and place back the handset batteries
• Make sure the supplied batteries are charged
up
The handset displays Unregistered.
• Follow the procedures to register the handset
to a base
Sound
Handset does not ring!
• Increase the volume
• Make sure that the adaptor and the phone cord
are connected properly
• Move the handset closer to the base unit
• Make sure the handset ringer is turned on
37
CD645_IFU_US_English.book Page 38 Friday, August 3, 2007
5:10 PM
Caller does not hear me!
• Microphone may be muted: During a call, press
> to unmuted the microphone.
Noise interference on your radio or
television.
• Move the power adapter or base station as far
away as possible
Product behavior
Caller Line Identification (CLI) service
does not work.
• Check your subscription with your network
operator
A phonebook entry cannot be stored.
• Check if the phonebook memory is full, delete
an entry to free memory.
The handset is unable to register.
• Make sure that p has been pressed for 3
seconds
• Each base can only register up to four handsets
Answering Machine
The answering machine does not record
calls.
• Make sure the answering machine is
connected to the power adaptor, and the
power adaptor is plugged into mains supply
which is switched on.
• Check if the answer machine is off, or Answer
only mode is selected.
• Check to see if the answering machine is
memory full. If so, delete some or all messages.
• Try switching off the power at the main socket,
and then turn it on again after 1 minute.
Unable to perform remote operation.
• Make sure the remote access is on (see Section
6.6.4.2)
• Make sure you entered the correct remote
access code
• Use a touch-tone phone
Note
If the above solutions do not help, remove the
power from both the handset and the base. Wait
for 1 minute and try again.
38
Frequently asked questions
CD645_IFU_US_English.book Page 39 Friday, August 3, 2007
11
5:10 PM
Index
A
H
Advanced Set 22, 23, 24, 34
Alarm 9, 19, 32, 33, 36
Alarm tone 19, 33
Answer a call 13, 21
Answering Machine 9, 10, 27, 28, 29, 35
Auto hang-up 21, 32, 34
Auto pick-up 21, 34
Auto prefix 24, 34
Handset locator 10
Handset name 21, 32, 34
Handset tone 20
Handsfree 8, 14
B
Baby call 23, 32, 34
Backlight 22, 32, 34, 36
Base station 6, 9, 10, 11, 15, 23, 27, 34
Battery level 9, 37
C
Call barring 22, 34
Call log 7, 13, 17
Call screening 31, 32
Call transfer 8, 36
Call waiting 15, 37
Caller Line Identification 7, 9, 13, 15, 20, 38
Clock & Alarm 19, 33
Conference call 8, 14, 15
Conference mode 25, 32
Configure your phone 12
Contrast 21, 34
Country setting 25
D
Date and time format 19
Default settings 12, 24, 32
Delete a number from the redial list 19
Delete a phonebook entry 17
Delete all phonebook entries 17
Delete current message 10
Delete the call log entry 18
Delete the entire call log 18
Delete the entire redial list 19
Dial mode 22, 32, 34
Direct access memory 17
E
Earpiece volume 7, 16, 32
Edit a phonebook entry 16
End a call 14, 21
Enter text and number 26
Event LED 7
F
FCC and IC statements 41
FCC RF Radiation Exposure Statement 42
First ring 20, 32, 33
Frequently asked questions 37
G
Group melody 20, 33
Index
I
Icon 9
Idle mode 7, 8, 12, 13, 16, 17, 18, 21, 23, 28
Install rechargeable batteries 11
Intercom 8, 14, 36
Interference Information 41
K
Key tone 20, 32
Keypad lock 20, 36
L
Language 21, 29, 32, 34, 35
LED message counter 10
Line cord 6, 11, 37
Loudspeaker 8, 9, 16, 28
M
Make a call 13
Master PIN 22, 32, 34
Menu structure 33
Mute 8, 16, 19
N
Network services 25
Notification to the local telephone company 41
O
Outgoing message 10, 21, 31
P
Page 10
Pause 8, 26
Personal Set 20, 21, 24, 33, 34
Personalized outgoing message 29, 36
Phonebook 7, 13, 16, 17, 19, 20, 24, 26
Play Messages 30, 35
Play messages 29
Predefined outgoing message 29, 30, 36
Predialing 13
Pulse 22, 34
Q
Quick Start Guide 6
R
Recall time 22, 32, 34
Redial 7, 13, 18, 36
Registration 10, 23, 34
Remote access 30, 31, 32, 36
Reset 12, 24, 34, 37
Rights of the Phone Company 41
Ring melody 20, 32, 33
Ring volume 20, 32, 33
Ringer 8, 9, 20, 32
39
CD645_IFU_US_English.book Page 40 Friday, August 3, 2007
5:10 PM
S
Save a redial list entry 19
Stop message playback 10, 31
Store a number in the phonebook 16
Switch call 8
T
Text 26
Tone 11, 14, 15, 16, 17, 19, 20, 22, 23, 30, 31, 32, 33, 34, 35
Transfer the phonebook 17
U
Unmute 16, 22
Unregister 24, 34, 37
V
Voice mail 9, 17, 35
40
Index
CD645_IFU_US_English.book Page 41 Friday, August 3, 2007
12
FCC and IC statements
Equipment approval Information
Your telephone equipment is approved for
connection to the public switched telephone
network and is in compliance with parts 15 and
68, FCC Rules and Regulations and the Technical
Requirements for Telephone Terminal
Equipment published by ACTA.
Notification to the local telephone
company
On the bottom of this equipment is a label
indicating, among other information, the US
number and Ringer Equivalence Number (REN)
for the equipment. You must, upon request,
provide this information to your telephone
company.
The REN is useful in determining the number of
devices you may connect to your telephone line
and still have all of these devices ring when your
telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed 5. to be
certain of the number of devices you may connect
to your line as determined by the REN, you
should contact your local telephone company.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with
this product. It is designed to be connected to a
compatible modular jack that is also compliant.
See installation instructions for details.
Notes
• This equipment may not be used on coin
service provided by the telephone company.
• Party lines are subject to state tariffs, and
therefore, you may not be able to use your
own telephone equipment if you are on a party
line. Check with your local telephone company.
• Notice must be given to the telephone
company upon permanent disconnection of
your telephone from your line.
• If your home has specially wired alarm
equipment connected to the telephone line,
FCC and IC statements
5:10 PM
ensure the installation of this product does not
disable your alarm equipment. If you have
questions about what will disable alarm
equipment, consult your telephone company
or a qualified installer.
Rights of the Phone Company
Should your equipment cause trouble on your
line which may harm the telephone network, the
telephone company shall, where practicable,
notify you that temporary discontinuance of
service may be required. Where prior notice is
not practicable and the circumstances warrant
such action, the telephone company may
temporarily discontinue service immediately. In
case of such temporary discontinuance, the
telephone company must:
(1) promptly notify you of such temporary
discontinuance; (2) afford you the opportunity to
correct the situation; and (3) inform you of your
right to bring a complaint to the Commission
pursuant to procedures set forth in Subpart E of
Part 68, FCC Rules and Regulations.
The telephone company may make changes in its
communications facilities, equipment, operations
or procedures where such action is required in
the operation of its business and not inconsistent
with FCC rules and Regulations. If these changes
are expected to affect the use or performance of
your telephone equipment, the telephone
company must give you adequate notice, in
writing, to allow you to maintain uninterrupted
service.
Interference Information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference; and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class b digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate
41
CD645_IFU_US_English.book Page 42 Friday, August 3, 2007
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures :
• Reorient or relocate the receiving antenna
(that is, the antenna for radio or television that
is “receiving” the interference).
• Reorient or relocate and increase the
separation between the telecommunications
equipment and receiving antenna.
• Connect the telecommunications equipment
into an outlet on a circuit different from that to
which the receiving antenna is connected.
If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio / television technician for
additional suggestions. Also, the Federal
Communications Commission has prepared a
helpful booklet, “How To Identify and Resolve
Radio/TV Interference Problems”. This booklet is
available from the U.S. Government Printing
Office,Washington, D.C. 20402.
Please specify stock number 004-000-00345-4
when ordering copies.
Noise
Electrical pulse noise is present at one time or
another. This is most intense during electrical
storms. Certain kinds of electrical equipment,
such as light dimmers, fluorescent bulbs, motors,
fans, etc., also generate pulse noise. Because radio
frequencies are susceptible to this, you may on
occasion hear pulse noise through the receiver.
This is usually only a minor annoyance and should
not be interpreted as a defect of the unit.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
42
5:10 PM
and operated with a minimum distance of 20
centimeters between the radiator and your body.
This transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter.
For hand held operation, this phone has been
tested and meets the FCC RF exposure
guidelines. Use of other accessories may not
ensure compliance with FCC RF exposure
guidelines.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC and Industry
Canada standards for Hearing Aid Compatibility.
Privacy
Privacy of communications may not be ensured
when using this telephone.
Additional Information
I.C. Notice
Terminal Equipment
NOTICE :This equipment meets the applicable
Industry Canada Terminal Equipment Technical
Specifications.
This is confirmed by the registration number. The
abbreviation, IC, before the registration number
signifies that registration was performed based on
a Declaration of Conformity indicating that
Industry Canada technical specifications were
met. It does not imply that Industry Canada
approved the equipment.
NOTICE :The Ringer Equivalence Number (REN)
for this terminal equipment is marked on the
equipment itself. The REN assigned to each
terminal equipment provides an indication of the
maximum number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist of any
combination of devices subject only to the
requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not
exceed five.
Radio Equipment
The term “IC:” before the radio certification
number only signifies that Industry Canada
technical specifications were met. Operation is
subject to the following two conditions : (1) this
FCC and IC statements
CD645_IFU_US_English.book Page 43 Friday, August 3, 2007
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Do not attempt to repair or modify this
equipment
Repairs to certified equipment should be made by
an authorized maintenance facility designated by
the supplier.
! Warning
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Service Centers
USA and CANADA
Phone: 1-800-233-8413
Refer to the Do not Return addendum for the
phone number and e-mail address support.
13 The RBRC® seal
13
5:10 PM
The RBRC® seal
The RBRC® Seal on the nickel
metal hydride battery indicates
that Philips Royal Electronics is
voluntarily participating in an
industry program to collect and
recycle these batteries at the end of their useful
lives, when taken out of service within the United
States and Canada.
The RBRC® program provides a convenient
alternative to placing used nickel metal hydride
batteries into the trash or municipal waste, which
may be illegal in your area.
Philips’s participation in RBRC® makes it easy for
you to drop off the spent battery at local retailers
participating in the RBRC® program or at
authorized Philips product service centers.
Please call 1-800-8-BATTERY for information on
Ni-MH battery recycling and disposal bans/
restrictions in your area. Philips’s involvement in
this program is part of its commitment to
protecting our environment and conserving
natural resources.
RBRC® is a registered trademark of Rechargeable
Battery Recycling Corporation.
43
CD645_IFU_US_English.book Page 45 Friday, August 3, 2007
5:10 PM
CD645_IFU_US_English.book Page 46 Friday, August 3, 2007
5:10 PM
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Document number: 3111 285 34752
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising