Philips DC910 User's manual
DC910
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Pull out the plastic
protective sheet
before use.
2
User Man
ual
Qu
ick
1
St
ar
tG
uid
e
User Manual
Quick Start Guide
Remote Control
AC power adaptor
4 X iPod dock adaptors
DC910_37_QSG_Eng
1
3/4/08, 15:39
Tip
1
Connect the AC power adaptor of the system.
POWERFUL BASS
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
POWERFUL BASS
1
Setting the clock
1
In standby mode, press and hold PROG/SET TIME on the remote control.
2
3
Press VOLUME +/- (or VOL +/- on the remote control) to switch
between 12 hour and 24 hour display.
Press PROG/SET TIME on the remote control again to confirm.
➜ The clock digits flash on the display panel.
4
Press VOLUME +/- (or VOL +/- on the remote control) to set the hours.
5
6
7
Press PROG/SET TIME on the remote control again.
➜ The clock digits for the minutes flash.
Press VOLUME +/- (or VOL +/- on the remote control) to
set the minutes.
Press PROG/SET TIME on the remote control to confirm the time.
DC910_37_QSG_Eng
2
3/4/08, 15:39
C
Enjoy
Programming and tuning to radio stations
1
Press SOURCE repeatedly (or TUNER on the remote control) to
select the tuner source (FM).
2
Press PROG on the remote control for more than two seconds to
program all available stations in order of waveband.
3
Press PRESET +/- (or ALBUM/PRESET 3 / 4 on the remote
control) until the desired preset station is displayed.
Playing a USB mass storage device/SD/MMC card
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1) and memory cards
1
Insert the USB device’s USB plug into the socket
the SD/MMC slot on the top of the system.
2
3
or fully insert the SD/MMC card into
Press SOURCE once or more (or USB/CARD on the remote control) to select
USB/CARD.
Play the available audio files using playback buttons on the set or remote control (such as
2;, S/T).
DC910_37_QSG_Eng
3
3/4/08, 15:39
C
Enjoy
Playing Apple iPod using DC910
1
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
2
Correctly place the compatible iPod player into the dock.
3
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
4
Power on your iPod player.
5
Select and play your favourite songs stored in the iPod player.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
Notes for remote control:
– First select the source you wish to control by pressing
one of the source select keys on the remote control (for
example iPod, TUNER).
– Then select the desired function (for example ÉÅ,
à, á).
C Royal Philips Electronics N.V. 2008
All rights reserved.
PDCC-ZYL-0810
DC910_37_QSG_Eng
4
3/4/08, 15:39
GB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement