Philips DCM105, DCM105/98 User's manual

Philips DCM105, DCM105/98 User's manual
Register your product and get support at
www.philips.com/welcome
DCM105
EN User manual
ZH-TW Ԛ͂ʹ˫
3
19
1 Important
Safety
Notice
4
4
6
2 Your Docking Entertainment System 6
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Connect
Connect speakers
Connect power
6
6
7
8
9
9
9
Eng lish
Contents
8 Adjust volume level and sound
effect
14
14
14
14
14
Adjust volume level
Select a preset sound effect
Enhance bass
Mute sound
9 Listen to radio
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
10 Other features
4 Get started
Prepare the remote control
Auto install radio stations
Turn on
Set clock
5 Play a disc
6 Play options
Skip to a track
Pause/resume play
Search within a track
Display play information
Repeat play
Random play
Program tracks
7 Play iPod
Compatible iPod
Listen to an iPod through this unit
Charge the iPod
Remove the iPod
10
10
10
11
11
14
14
14
15
15
15
15
15
16
Set the sleep timer
Set the alarm timer
Listen to an audio player
11 Product information
6SHFLÀFDWLRQV
16
16
12 Troubleshooting
17
11
12
12
12
12
12
12
12
12
13
13
13
13
13
EN
3
1 Important
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
Safety
c Heed all warnings.
Know these safety symbols
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
RURWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUV
that produce heat.
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation point’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
:$51,1*7RUHGXFHWKHULVNRIÀUHRU
electric shock, this apparatus should not be
H[SRVHGWRUDLQRUPRLVWXUHDQGREMHFWVÀOOHG
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
VSHFLÀHGE\WKHPDQXIDFWXUHU
k Use only with the cart,
stand, tripod, bracket,
RUWDEOHVSHFLÀHGE\
the manufacturer or
sold with the apparatus.
When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m 5HIHUDOOVHUYLFLQJWRTXDOLÀHGVHUYLFH
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
4
EN
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
WKHDSSDUDWXVHJOLTXLGÀOOHGREMHFWV
OLJKWHGFDQGOHV
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
Caution
‡ Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Warning
‡ Where the MAINS plug or an appliance coupler
is used as the disconnect device, the disconnect
device shall remain readily operable.
Warning
‡
‡
‡
‡
Never remove the casing of this unit.
Never lubricate any part of this unit.
3ODFHWKLVXQLWRQDÁDWKDUGDQGVWDEOHVXUIDFH
Never place this unit on other electrical
equipment.
‡ Only use this unit indoors. Keep this unit away
IURPZDWHUPRLVWXUHDQGOLTXLGÀOOHGREMHFWV
‡ Keep this unit away from direct sunlight, naked
ÁDPHVRUKHDW
‡ Never look into the laser beam inside the unit.
Hearing safety
Listen at a moderate volume.
‡ Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
‡ Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
‡ Set your volume control at a low setting.
‡ Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
‡ Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
‡ Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
‡ Listen at reasonable volumes for
reasonable periods of time.
‡ Be careful not to adjust the volume as
your hearing adapts.
‡ Do not turn up the volume so high that
you can’t hear what’s around you.
‡ You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
VNDWHERDUGLQJHWFLWPD\FUHDWHDWUDIÀF
hazard and is illegal in many areas.
EN
5
Eng lish
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
‡ Install all batteries correctly, + and as marked on the unit.
‡ Do not mix batteries (old and new
or carbon and alkaline, etc.).
‡ Remove batteries when the unit is
not used for a long time.
Notice
$Q\FKDQJHVRUPRGLÀFDWLRQVPDGHWRWKLV
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
The making of unauthorized copies of
copy-protected material, including computer
SURJUDPVÀOHVEURDGFDVWVDQGVRXQG
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPWKH
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
‡ enjoy audio from audio CDs, iPod players,
and other external devices
‡ listen to FM radio stations
You can enrich sound output with these
sound effects:
‡ Digital Sound Control (DSC)
‡ Dynamic Bass Boost (DBB)
The unit supports the following media format:
This apparatus includes this label:
What’s in the box
Note
‡ The type plate is located at the rear of the
apparatus.
6
EN
Check and identify the contents of your
package:
‡ Main unit
‡ Loudspeaker boxes x 2
‡ Power cord
‡ MP3 link cable x 1
‡ Remote control
‡ Quick start guide
‡ User manual
DO
DO
MP 3
-L IN
CK
ING
EN
TE
RTA
INM
EN
T S
YS
TE
M D
C
M 10
CK
Eng lish
Overview of the main unit
for
5
K
VOLU
SOUR
ME
CE
MOD
E
DBB
a IR
‡
j
‡
‡
Remote control sensor.
b Display panel
‡ Show current status.
c MP3 LINK
‡ Jack for an external audio device.
d
‡
Headphone jack.
e SOURCE
‡ Select a source.
f MODE
‡ Select repeat play modes.
‡ 6HOHFWVKXIÁHSOD\PRGHV
/
‡
‡
Skip to the previous/next track.
Fast reverse or fast forward within a
track or disc.
Tune to a radio station.
Adjust time.
‡
Start or pause play.
‡
Turn on the apparatus; switch to
standby mode.
‡
Open/close the disc compartment.
k
l
m
n iPod dock
g DBB
‡ Turn on or off dynamic bass
enhancement.
h VOLUME+/‡ Adjust volume.
i
‡
Stop play or erase a program.
EN
7
Overview of the remote
control
e SLEEP/TIMER
‡ Set the sleep timer.
‡ Set the alarm timer.
f
/
‡ Navigate through the iPod menu.
g
/
‡
‡
‡
‡
‡
Fast reverse or fast forward within a
track or disc.
Skip to the previous/next track.
Tune to a radio station.
Adjust time.
Navigate through the iPod menu.
h OK/
‡ Start or pause play.
‡ &RQÀUPDVHOHFWLRQ
i DSC
‡ Select a preset sound setting: POP,
JAZZ, ROCK or CLASSIC.
j MUTE
‡ Mute volume.
k PRESET +/‡ Select a preset radio station.
l
‡
Stop play or erase a program.
m VOL +/‡ Adjust volume.
n DBB
‡ Turns on or off dynamic bass
enhancement.
a POWER
‡ Turn on the apparatus; switch to
standby mode.
b Source selection keys
‡ Select a source.
c REP ALL
‡ Select a repeat play mode: repeat
one track or all tracks.
d SHUF
‡ Play tracks randomly.
8
EN
o MENU
‡ Access the iPod menu.
p CLOCK/DISPLAY
‡ Set the clock.
‡ View the clock.
‡ During play, select display
information.
q PROG
‡ Program tracks.
‡ Program radio stations.
‡ Select 12 hour or 24 hour format.
Eng lish
Connect power
3 Connect
Caution
Connect speakers
‡ Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
‡ Before connecting the AC power cord, ensure
you have completed all other connections.
Note
‡ The type plate is located on the rear of the
main unit.
‡ The voltage selector is at the bottom of the
main unit
Note
‡ Ensure that the colors of the speaker wires and
terminals are matched.
1
2
+ROGGRZQWKHVRFNHWÁDS
3
5HOHDVHWKHVRFNHWÁDS
1
Switch the voltage selector to the local
power line voltage.
2
Connect the AC power cord to the AC
MAINS~ jack on the main unit and to the
wall socket.
Insert the stripped part of the wire
completely.
‡ Insert the right speaker wires to
“RIGHT”, left speaker wires to
“LEFT”.
‡ Insert the red wires to “+”, black
wires to “-”.
a
b
c
EN
9
4 Get started
Note
‡ If you are not going to use the remote control
for a long time, remove the batteries.
‡ Do not use old and new or different types of
Caution
‡ Use of controls or adjustments or
batteries in combination.
‡ Batteries contain chemical substances, so they
should be disposed of properly.
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Auto install radio stations
When you connect the unit to the power
VXSSO\IRUWKHÀUVWWLPHRUQRUDGLRVWDWLRQLV
stored in this unit, Plug and Play is activated to
store all available radio stations automatically.
1
Connect the unit to the power supply.
» [AUTO INSTALL - PLEASE PRESS
PLAY, STOP CANCEL] (auto install
- press
; to cancel, press ) is
displayed.
2
Press
on the main unit to start
installation.
» [AUTO] (auto) is displayed.
Prepare the remote control
Caution
‡ Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV
LQÀUH
» The unit automatically stores radio
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
» When all the available radio stations
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
1
2
Open the battery compartment.
3
Close the battery compartment.
10
EN
Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
Turn on
Press POWER.
» The unit switches to the last selected
source.
Switch to standby
1
Press POWER to switch the unit to
standby mode.
» The backlight on the display panel is
dimmed.
» The clock (if set) appears on the
display panel.
1
2
Eng lish
1
5 Play a disc
Press DISC to select the disc source.
Press on the top panel of the unit.
» The disc door opens.
3
Place a disc onto the tray and press
again.
» Ensure that the label side faces
upwards.
4
Play starts automatically.
If play does not start, press /
to
select a track and then press OK/ .
‡
Set clock
1
In the standby mode, press and hold
CLOCK/DISPLAY to activate the clock
setting mode.
» The 12 hour or 24 hour format is
displayed.
2
Press PROG repeatedly to select 12 hour
or 24 hour format.
3
Press CLOCK/DISPLAYWRFRQÀUP
» The hour digits are displayed and begin
to blink.
4
5
Press
6
7
Press
/
to set the hour.
Press CLOCK/DISPLAYWRFRQÀUP
» The minute digits are displayed and
begin to blink.
/
to set the minute.
Press CLOCK/DISPLAYWRFRQÀUP
Tip
‡ To view the clock during play, press CLOCK/
DISPLAY repeatedly until the clock is
displayed.
EN
11
Random play
6 Play options
1
Press SHUF.
» >6+8)@VKXIÁHLVGLVSOD\HGDOOWUDFNV
are played randomly.
2
To return to normal play, press SHUF
again.
Skip to a track
1
Press
/
to select another track.
Tip
Pause/resume play
1
‡ 7KHUHSHDWDQGVKXIÁHIXQFWLRQVFDQQRWEH
activated at the same time.
During play, press OK/
resume play.
to pause/
Program tracks
Search within a track
You can program a maximum of 20 tracks.
1
2
1
In CD mode, at the stop position, press
PROG to activate the program mode.
» [PROG] (program) blinks on the
display panel.
Display play information
2
1
Press /
to select a track number,
then press PROGWRFRQÀUP
3
Repeat steps 2 to select and store all
tracks to program.
4
Press OK/
to play the programmed
tracks.
» During play, [PROG] (program) is
displayed.
During play, press and hold
/
.
Release to resume normal play.
During play, press CLOCK/DISPLAY
repeatedly to select different play
information.
Repeat play
‡
1
During play, press REP ALL repeatedly to
select:
‡ [REP] (repeat): the current track is
played repeatedly.
‡ [REP ALL] (repeat all): all tracks are
played repeatedly.
2
To return to normal play, press REP ALL
repeatedly until the repeat mode is no
longer displayed.
12
EN
To erase the program, in the stop
position, press .
7 Play iPod
Eng lish
Note
‡ In iPod menu mode, if no key is pressed for
more than 10 seconds, OK/
its play/pause function.
You can enjoy audio from iPod through this unit.
Compatible iPod
Apple iPod models with a 30-pin dock
connector:
‡ iPod classic
‡ iPod touch
‡ iPod nano 1G/2G/3G
‡ iPod 5th generation
will return to
Charge the iPod
The docked iPod begins to charge as soon as
the unit is connected to AC power.
Remove the iPod
1
Pull the iPod out of the dock.
Listen to an iPod through this
unit
1
Place the iPod in the dock.
DO
2
CK
for
Press iPod to select the iPod source.
» The connected iPod plays automatically.
‡
‡
‡
‡
To pause/resume play, press OK/ .
To skip to a track, press / .
To search during play: press and
hold / , then release to resume
normal play.
To navigate the menu: press MENU,
then press / to select, and press
OK/ WRFRQÀUP
EN
13
8 Adjust volume
level and sound
effect
Adjust volume level
1
9 Listen to radio
Tune to a radio station
1
2
During play, press VOL +/- to increase/
decrease the volume level.
Select a preset sound effect
During play, press DSC repeatedly to
select:
‡ [POP] (pop)
‡ [JAZZ] (jazz)
‡ [ROCK] (rock)
‡ [CLASSIC] (classic)
Press and hold /
for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
1
Press TUN to select FM.
Repeat step 2 to tune to more stations.
‡ To tune to a weak station, press
/ UHSHDWHGO\XQWLO\RXÀQG
optimal reception.
Program radio stations
automatically
Note
Enhance bass
‡ You can program a maximum of 20 preset
radio stations.
1
During play, press DBB to turn or or off
dynamic bass enhancement.
» If DBB is activated, DBB is displayed.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
14
EN
1
In the tuner mode, press and hold PROG
for 2 seconds to activate automatic
program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» 7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV
broadcast automatically.
Note
‡ You can program a maximum of 40 preset
radio stations.
1
2
3
4
Tune to a radio station.
10 Other features
Eng lish
Program radio stations
manually
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
Press PROG to activate program mode.
» [PROG] (program) blinks on the
display.
Press PRESET +/- to allocate a number
(1 to 20) to this radio station, then press
PROGWRFRQÀUP
» The preset number and the frequency
of the preset station are displayed.
To deactivate sleep timer
1
Repeat the above steps to program other
stations.
Note
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated, the
display shows .
Press SLEEP/TIMER repeatedly until
[OFF] is displayed.
» When sleep timer is deactivated,
disappears on the display.
Set the alarm timer
‡ To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
Press PRESET +/- to select a preset
number.
Tip
‡ )0DQWHQQDLVÀ[HGWRWKHPDLQXQLW
‡ Position the antenna as far as possible from
This unit can be used as an alarm clock. The
DISC, TUNER or iPod source is activated to
play at a preset time.
1
Ensure that you have set the clock
correctly.
2
In the standby mode, press and hold
SLEEP/TIMER.
3
Press DISC , TUN or iPod to select a
source.
4
Press SLEEP/TIMERWRFRQÀUP
» The hour digits are displayed and begin
to blink.
5
6
Press
TV, VCR or other radiation source.
‡ For optimal reception, fully extend and adjust
the position of the antenna.
7
8
/
to set the hour.
Press SLEEP/TIMERWRFRQÀUP
» The minute digits are displayed and
begin to blink.
Press
/
to set the minute.
Press SLEEP/TIMERWRFRQÀUP
» The timer is set and activated.
EN
15
Note
‡ If the iPod source is selected but no iPod is
connected, the system will switch to the tuner
source automatically.
11 Product
information
Note
Activate and deactivate alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated, the display shows
.
» If timer is deactivated,
the display.
disappears on
Note
‡ Alarm timer is not available in MP3 LINK
mode.
‡ If the DISC source is selected and the
track cannot be played, tuner is activated
automatically.
‡ Product information is subject to change
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
2X5W RMS
60 - 16kHz, ±3dB
>65dB
0.5 V RMS 20kohm
Disc
Listen to an audio player
You can listen to an MP3 player through this
unit.
1
Press MP3 LINK to select MP3 LINK
source.
2
Connect the supplied MP3 link cable to:
‡ MP3 LINK jack (3.5 mm) on the unit
‡ the headphone jack on an external
device
3
Start to play the device (see the device
user manual).
16
EN
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
Semiconductor
12cm/8cm
CD-DA, CD-R,
CD-RW
24Bits / 44.1kHz
<1%
60Hz -16kHz
(44.1kHz)
>65dBA
Tuning Range
Tuning Grid
Sensitivity
- Mono, 26 dB S/N
Ratio
Search Selectivity
Total Harmonic
Distortion
Signal to Noise Ratio
FM: 87.5 - 108 MHz
50 KHz
< 22 dBf
< 36 dBu
< 3%
> 45 dBu
4ohm
3.5”
>82dB/m/W
General information
AC power
Operation Power
Consumption
Standby Power
Consumption
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
Weight
- With Packing
- Main Unit
- Speaker Box
Warning
‡ Never remove the casing of this apparatus.
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
12 Troubleshooting
Eng lish
Tuner
110 - 127/220-240 V,
50/60 Hz
20 W
<4W
150 x 152 x 250 mm
150 x 152 x 197 mm
5.07 kg
2.02 kg
2 x 0.895 kg
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
‡
Ensure that the AC power plug of the
unit is connected properly.
‡
Ensure that there is power at the AC
outlet.
‡
As a power-saving feature, the unit
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No sound or poor sound
‡
Adjust the volume.
‡
Disconnect the headphones.
‡
Check that the speakers are connected
correctly.
‡
Check if the stripped speaker wires are
clamped.
Left and right sound outputs reversed
‡
Check the speaker connections and
location.
No response from the apparatus
‡
Disconnect and reconnect the AC power
plug, then turn on the system again.
‡
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
EN
17
Remote control does not work
‡
Before you press any function button,
ÀUVWVHOHFWWKHFRUUHFWVRXUFHZLWKWKH
remote control instead of the main unit.
‡
Reduce the distance between the remote
control and the unit.
‡
Insert the battery with its polarities (+/–
signs) aligned as indicated.
‡
Replace the battery.
‡
Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
‡
Insert a disc.
‡
Check if the disc is inserted upside down.
‡
Wait until the moisture condensation at
the lens has cleared.
‡
Replace or clean the disc.
‡
8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF
Poor radio reception
‡
Increase the distance between the unit
and your TV or VCR.
‡
Fully extend the FM antenna.
Timer does not work
‡
Set the clock correctly.
‡
Switch on the timer.
Clock/timer setting erased
‡
Power has been interrupted or the power
cord has been disconnected.
‡
Reset the clock/timer.
18
EN
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
DCM105_98_UM_V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement