null User manual | Manualzz

Panasonic
TDA30
Quick Reference Guide
TDA30 Quick Reference Guide
Enter Programming Mode
 From extension 101, press PROG
 Press * # followed by password 1234
 The handset will display Sys-Pgm No?
System Time & Date
 Enter programming mode as described above
 Press 000 and the handset will display Date & Time Set
 Press enter
 Change the date settings, then press the AUTO DIAL/STORE key
on the handset
 The key will light up in red and a tone will sound to confirm the
settings have been saved
 Press the down arrow to scroll to time settings and change as
needed
 Press the AUTO DIAL/STORE key on the handset again to save
settings
Change Extension Names
 Enter programming mode as described above
 Press 004 and the handset will display Ext Number
 Press enter
 Select the extension number you wish to change the name for
 Enter the new name using the keys on the handset
 Press the AUTO DIAL/STORE key on the handset to save
 Scroll up or down to change more names as needed
Program Extension Key
 Press PROG.
 Press the key you would like to program.
 Press 1 on the number pad and enter desired extension
number.
 To save, press AUTO DIAL/STORE.
Speed Dial Keys
 Press PROG.
 Press the key you would like to program.
 Press 2 on the number pad and enter 0 (outside line) followed
by the phone number.
 To save, press AUTO DIAL/STORE.
Pick Up Incoming Call
 Go off hook, then dial * 4 0 0 1, or to pick up from another
specific ringing extension, dial * 4 1, followed by their extension
number.
 The call will now connect.
Group Paging
 Go off hook, then dial * 3 3 0 1.
 Begin the announcement after the tone.
Forward Extension
 Go off hook, then dial * 7 1 0 followed by:
o 2 for immediate forward
o 5 for busy/no answer forward
 Then enter destination (For example, extension 101, or 0
followed by phone number).
 Press #.
Call Transfer to another Extension
 During a call, press TRANSFER followed by the extension
number you wish to transfer the call to.
 Wait for the extension to answer, then announce the call, or
simply hang up and wait for them to answer.
 The caller will be on hold until the extension answers.
Conference Call
 During the initial call, press CONF.
 Select another outside line, then dial a phone number.
 When the call connects, press CONF again to link the two calls.
 To add more parties, repeat this process.
Place a Call on Hold
 While on a call, press HOLD.
 The line key will appear flashing green on your handset and
flashing red on any other handset.
Last Number Dialling
 Go off hook and press the REDIAL key.
 Wait for the call to connect.
Call Log
 Press MENU.
 Scroll down to Incoming Call Log or Outgoing Call Log.
 Press enter.
 Scroll list up or down to check the log.
 Please note that this feature is only available if installed.
Background Music
 Go off hook and dial * 7 5 1 1 to turn on.
 Go off hook and dial * 7 5 1 0 to turn off.
Do Not Disturb
 Go off hook and dial * 7 1 0 1 to turn on Do Not Disturb.
 Go off hook and dial * 7 1 0 0 to turn off Do Not Disturb.
 This feature is set per extension and not for the entire system.
JSL Forum Ltd 412 Cranbrook Street N  Cranbrook, BC, V1C 3R6  250.417.0042  www.jslforum.com

Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project