Untitled - Bienvenidos a Protos Lighting

Untitled - Bienvenidos a Protos Lighting
LED Vivid Wash II
(High Power LED)
(Direct DMX Control)
LED Vivid Wash II can be operated standalone, master slave with built in pre-programmed effects or directly with and
standard DMX-512 controller. The LED Vivid Wash II is engineered with push button waterproof external LED display based
user interface for setting the mode of operation or DMX Address. The LED Vivid Wash II used only 3 Channels of DMX
to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can
also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-AI-100. For more
information on controller functionality refer to the control section of this catalog.
* Private Villa, Repulse Bay, Hongkong, P.R.China
The LED Vivid Wash II housing is composed of Aluminum Die Cast fixture housing, heat treated glass aperture plate, rated
at IP65.
* Neo-Neon Hotel, Jiangmen, P.R. China
148
149
LED Wash Series
LED Vivid Wash II is an energy saving, RGB LED based, wash fixture, Incorporating 36 RGB Power LEDs the LED Vivid Wash
II produces full color 16.7M true 24 Bit color changing effects for architectural and decorative illumination.
(RGB)
(AWB)
(Blue)
(White)
(Amber)
Specifications
LW-320x130-WP-PC-120V/240V
LED Color Range
16.2M Troe 29-Bif Linear Color Changing
Light Source
LED Qty.
Beam Angle
Light Projecting Distance
Digital Interface
Control system
DMX Channels
Fixture Housing
Connecting Mode
Connector
Weight
Dimensions
Aperture Glass
High power LED
Red12, Green12, Blue12
25°
20m
Standard DMX compatible
SRC-washer-100 / Simple controller
3 Channels
Die Cast Powder Coated Aluminum
Standard signal cord and power cord
3-pin signal connector
3.9Kg
L320xW145xH225mm
Tempered Glass
Electrical Specifications
Operating Voltage
Operating Current
Power Consumption
90-264V AC/24V DC
Max. 2A
48watts
LW-320x130-WP-PC--120V/240V
Power LED AWB (Amber, WLED White LED, Blue) For Linear Color
Correlated Temperature (CCT) Control from 2000 to 10,000K
High power LED
Amber12, White12, Blue12
Item No.
Light Source
LED Qty.
Beam Angle
Light projecting Distance
Fixture Housing
Connecting Mode
Weight
Dimensions
LW-320x130-WP-PC-A-120V/240V
High power LED
Amber30
25°
20m
Die Cast Powder Coated Aluminum
Power cord
3.9Kg
L320xW145xH225mm
LW-320x130-WP-PC-W-120V/240V
White30
LW-320x130-WP-PC-B-120V/240V
LED Wash Series
Item No.
Blue30
Electrical Specifications
Operating Voltage
Operating Current
Power Consumption
90-264V AC/24V DC
Max. 1.7A
40watts
Environmental Specifications
Operating Temperature
IP Rating
-20°C ~ +40°C
IP65
Environmental Specifications
Operating Temperature
-20°C ~ -40°C
IP Rating
IP65
Vivid Wash II are available in Black or White Finish Standard.
Custom Finishes upon request (Volume Dependant)
Dimensional DIagram
* Neo-Neon Hotel, Jiangmen, P.R. China
150
151
Due to the limitation of the type set, this catalog’s specifications for each fixture may not be shown.
For more information on other models please contact your Neo-Neon™ Sales Associate.
LW-320*130-WP-PC (RGB)
Candle Power Distribution
DMX Function Chart
Mode
1 Pixel
Installation position
Testing surface
Horizontal
A-A surface
Electrical Parameters
Current
Voltage
Power consumption
Testing Result
Illuminance Distribution
60.1
70.4
83.4
104.0
117.7 124.3
108.6
90.3
74.9
63.7
76.2
97.5
155.1 248.6
314.0 308.4
240.2
153.3
129.1
77.6
101.9 163.6
320.6 593.5
751.4 684.1
473.8
265.4
149.5
94.4
136.4 269.2
629.9 1047.7 1242.0 1157.9 829.9
475.7
220.6
118.7
156.1 370.1
801.9 1255.1 1619.6 1535.5 1114.0 630.8
281.3
141.1
147.7 329.9
746.7 1205.6 1296.0 1528.9 1129.9 680.4
298.1
142.1
128.9 237.4
529.9 923.4
1203.7 1213.1 943.9
542.9
246.7
120.6
103.7 154.2
291.6 550.5
752.3 761.7
567.3
306.5
144.9
92.5
89.7
112.1
152.3 240.2
317.8 315.9
214.9
135.5
93.5
71.0
72.9
86.9
100.9 116.8
129.9 121.5
101.9
81.3
67.3
57.0
0.5M
Units:
Color:
Direction:
Testing distance:
Multipliers:
0.253 A (RGB), 0.211A (White)
220V
48W (RGB), 40W (White)
0M
Lux
White Balance
On axis
1m
0.115 Red, 0.378 Green, 0.506 Blue
0.5M
Max. luminous Intensity
Luminous flux
Efficacy
Beam angle
Remark
1022.806cd
370.7lm (RGB), 590lm (White)
11.029lm/w (RGB), 12.71lm/w (white)
25˚
Controlling standard voltage 220V power
Illuminance
0M
Distance(m)
1
Color
1724.3
White
213.1
Red
700.9
Green
937.4
Blue
2
3
4
5
456.1
57.0
185.9
242.9
208.4
27.1
85.9
110.3
118.1
15.2
47.9
62.4
74.6
9.3
30.4
40.4
Example 1-Expanded (When more than 30
Fixtures from one controller is required)
Add (1) Signal Amplifier SDL-109A-T1 between
each group of 30 fixtures. See Page# 414-419
of this catalog for more information on the SDL109A-T1 Signal Amplifier.
The maximum distance should not extend
150m between controller and the last lighting
fixture.
Channel
3
Name
Value
Function
1
Amber
0-255
0-100% Intensity
2
White
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
Connection Example
DMX 512 or SRC-AI-100
Example 1
Up to 30 units can be connected in this configuration without the need for a signal amplifier. See Example 2
for larger applications and requirements.
LED Vivid Wash
LED Vivid Wash
Available Interconnection Cables XLR-Male to
Mini Female XLR Part# XLRM-M-XLRF
XLR-Female to Mini Male XLR Part# XLRF-MXLRM
Controllers
DMX-512
SRC-washer-100 (Page P414-419)
* Controllers sold separately
Example 2
(When more than 30 Fixtures from one controller is required and the distance of more than 150 Meters
distance between the controller and last fixture is required)
Add (1) Signal Amplifier SRC-143 for every 4 groups of 30 fixtures (120 Total per SRC-143) Connect the
output of the first SRC-143 to the input of the next SRC-143 to add additional groups.
See Page# P408-411 of this catalog for more information on the SRC-143 Signal Amplifier.
LED Vivid Wash
Unit: Lux
Direction: On axis
SRC-143/
SDL-109A-T1
LED Vivid Wash
0.5M
LW-320*130-WP-PC-W (WLED White)
SRC-143/
SDL-109A-T1
Candle Power Distribution
SRC-143/
SDL-109A-T1
SRC-143/
SDL-109A-T1
Illuminance
Distance(m)
Color
White
1
2
3
4
5
937.4
242.9
110.3
62.4
40.4
Unit: Lux
Direction: On axis
152
153
LED Wash Series
Testing Circumstance
DMX Channels
Specifications
LW-320x130-WP-UB-240V-4W-3L
Item No.
LED Color Range
Light Source
LED Qty.
Beam Angle
Light Projecting Distance
Data Interface
Control System
DMX Channels
Fixture Housing
Connecting Mode
Connector
Weight
Dimensions
Aperture Glass
LED Wash Series
RGB 16.7M Linear Color Control
Super Bright LED
Red 120, Green 120, Blue 120
25°
20m
Standard DMX protocol (RS485 terminal)
SRC-181 controller
3 Channels
Die Cast Powder Coated Aluminum
Standard signal cord and power cord
3-Pin Control and Installation Type dependant
3.9Kg
L331xW124xH213mm
Tempered Glass
Electrical Specifications
90-264V AC/12V DC
0.25A
Max.26W
Operating Voltage
Operating Current
Power Consumption
Environmental Specifications
LED Vivid Wash 1S
Built in Pre-Programmed Effects
With the SRC-181 controller you can link up to 60 fi xtures per controller and control them via the
internal multi in programs or via an external DMX-512 controller. In many installations there is no
need to individually control each fi xtures color as the LED Vivid Wash series is often use to paint
with light large surfaces such as building facades. By eliminating the individual DMX control and
using the SRC-181 control the cost of the fi xtures has been greatly reduced.
154
Selectable HOLDER color. (16.7M variables)
Single color or transitional
Cross fade between colors
Color chasing
Cycling
Holder Color
Strobing
Cross Fade
Chasing
Color Cycle
(Ultra High LED)
(Non-Direct DMX)
LED Vivid Wash 1S (Ultra-bright) is the latest version of the Neo-Neon LED Wall Wash Series.
Everything about the LED Vivid Wash 1S (Ultra-bright) is the same as with the standard version
except we have removed the DMX-512 internal address function.
-20°C ~ +40°C
IP65
Operating Temperature
IP Rating
Control and Accessories
Light Output
Color
Total Output (lumens)
power (watts)
Efficacy (lm/w)
Red
52.16
8.7
6
Green
133.11
9.5
14
Blue
24.28
8.9
2.7
Illuminance
SRC-181 (For more information see Page#
P502-507 of this catalog).
Distance(m)
Color
White
1
2
3
4
5
700
174
79.6
45.24
28.03
155
LED Vivid Wash 1
(Ultra Bright RGB, AWB, A/W/B LED)
(Direct DMX Control)
LED Vivid Wash I can be operated standalone, master slave with built in pre-programmed effects or directly with and
standard DMX-512 controller. The LED Vivid Wash I is engineered with push button waterproof external LED display based
user interface for setting the mode of operation or DMX Address. The LED Vivid Wash I used only 3 Channels of DMX
to enable external programming of linear color changing, step based scenes as desired by the lighting designer. You can
also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-AI-100. For more
information on controller functionality refer to the control section of this catalog.
The LED Vivid Wash I housing is composed of Aluminum Die Cast fixture housing, heat treated glass aperture plate, rated
at IP65.
156
157
LED Wash Series
LED Vivid Wash I is an energy saving, RGB LED based, wash fixture, Incorporating 360 RGB Ultra Bright LEDs the LED Vivid
Wash I produces full color 16.7M true 24 Bit color changing effects for architectural and decorative illumination.
(RGB)
(AWB)
(Amber)
Specifications
(Blue)
LW-320x130-WP-UB
LW-320x130-WP-SB
LED Color Range
RGB 16.7M Linear Color Control
Light Source
LED Qty.
Beam Angle
Light Projecting Distance
Data Interface
Control System
DMX Channels
Fixture Housing
Connecting Mode
Connector
Weight
Dimensions
Aperture Glass
Ultra Bright LED / Super Bright LED
Red 120, Green 120, Blue 120
45°
20m
Standard DMX protocol (RS485 terminal)
SRC-washer-100 / simple controller
3 Channels
Die Cast Powder Coated Aluminum
Standard signal cord and power cord
3-Pin Control and Installation Type dependant
3.9Kg
L320xW145xH225mm
Tempered Glass
Electrical Specifications
90-264V AC/12V DC
Max. 3A
25watts
LW-320x130-WP-AWB
Ultra bright LED AWB (Amber, WLED White LED, Blue) For Linear Color
Correlated Temperature (CCT) Control from 2000 to 10,000K
Ultra Bright LED / Super Bright LED
Amber 120, White 120, Blue 120
Item No.
LW-320x130-WP-A
LED Color Range
Light Source
LED Qty.
Beam Angle
Light Projecting Distance
Fixture Housing
Connecting Mode
Weight
Dimensions
Amber
Super bright LED
Amber 270
45°
20m
Die Cast Powder Coated Aluminum
Power cord
3.9Kg
L320xW145xH225mm
LW-320x130-WP-SB-W
LW-320x130-WP-UB-W
LW-320x130-WP-B
White
Blue
White 270
Blue 270
LED Wash Series
Specifications
Item No.
Operating Voltage
Operating Current
Power Consumption
(White)
Electrical Specifications
Operating Voltage
Operating Current
Power Consumption
90-264V AC/124V DC
Max. 1.3A
25watts
Environmental Specifications
Operating Temperature
IP Rating
-20°C ~ +40°C
IP65
Environmental Specifications
Operating Temperature
IP Rating
-20°C ~ +40°C
IP65
Built in Pre-Programmed Effects
Holder Color
Strobing
Cross Fade
Chasing
Color Cycle
Selectable HOLDER color. (16.7M variables)
Single color or transitional
Cross fade between colors
Color chasing
Cycling
Dimensional DIagram
* Neo-Neon Showroom, Jiangmen, P.R. China
158
* Clayton Bay Hotel, Hiroshima, Japan
159
Due to the limitation of the type set, this catalog’s specifications for each fixture may not be shown.
For more information on other models please contact your Neo-Neon™ Sales Associate.
LW-320*130-WP-SB/UB (RGB)
Candle Power Distribution
DMX Function Chart
Mode
1 Pixel
Installation position
Testing surface
Horizontal
A-A surface
DMX-512
SRC-washer-100 (Page P414-419)
* Controllers sold separately
Electrical Parameters
Current
Voltage:
Power consumption
70.5
80.4
92.6
116.3
129.4 137.4
118.7
102.5
84.3
75.5
81.1
104.3
167.2 258.1
324.1 314.4
248.1
162.4
137.1
85.3
112.4 173.1
334.1 601.1
762.5 694.1
581.6
272.3
157.2
102.2
142.8 272.3
634.7 1057.3 1263.0 1157.9 839.1
782.5
234.7
124.6
162.3 380.4
812.4 1265.5 1626.6 1547.5 1125.0 643.1
292.3
151.3
157.7 338.9
753.2 1243.2 1301.1 1534.1 1141.2 692.1
299.1
153.1
137.7 246.9
535.2 937.8
1214.0 1224.3 952.6
552.1
257.9
133.1
112.0 167.2
298.6 561.3
761.3 772.7
573.3
319.5
152.1
102.3
94.3
123.0
162.1 263.2
317.8 321.0
224.3
141.5
103.5
81.0
82.9
93.9
112.3 123.7
132.6 134.5
112.5
95.0
78.2
70.6
Units:
Color:
Direction:
Testing Distance:
Multipliers:
Name
Value
Function
1
Red
0-255
0-100% Intensity
2
Green
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
Connection Example
DMX 512 or SRC-AI-100
Example 1
Up to 30 units can be connected in this configuration without the need for a signal amplifier. See Example 2
for larger applications and requirements.
LED Vivid Wash
Testing Result
Illuminance Distribution
0.5M
0.253 A
12V DC
25W
Channel
3
0M
Lux
White Balance
On axis
1m
0.115 Red, 0.378 Green, 0.506 Blue
0.5M
Max. luminous intensity
Luminous flux
Efficacy
Beam angle
Remark
1022.806cd
370.7lm
11.029lm/w
45˚
Controlling standard voltage 220V
LED Vivid Wash
Illuminance
0M
Distance(m)
1
Color
1943.5
White
258.3
Red
805.5
Green
885.5
Blue
Example 2
2
3
4
5
486.1
67.0
205.5
250.3
250.4
30.5
96.9
135.3
135.1
20.2
52.3
70.5
75.6
12.3
37.8
46
Unit: Lux
Direction: On axis
0.5M
DMX-512 Controllers direct to fixture types
XLR-Male to Mini Female XLR
Part# XLRM-M-XLRF
XLR-Female to Mini Male XLR
Part# XLRF-M-XLRM
(When more than 30 Fixtures from one controller is required and the distance of more than 150 Meters
distance between the controller and last fixture is required)
Add (1) Signal Amplifier SRC-143 for every 4 groups of 30 fixtures (120 Total per SRC-143)
Connect the output of the first SRC-143 to the input of the next SRC-143 to add additional groups.
See Page# P408-411 of this catalog for more information on the SRC-143 Signal Amplifier.
LED Vivid Wash
SRC-143/
SDL-109A-T1
LW-320x130-WP-SB/UB-W (WLED White LED)
LED Vivid Wash
SRC-143/
SDL-109A-T1
Candle Power Distribution
SRC-143/
SDL-109A-T1
SRC-143/
SDL-109A-T1
Illuminance
Distance(m)
1
Color
1724.3
White
2
3
4
5
456.1
208.4
118.1
74.6
Unit: Lux
Direction: On axis
160
161
LED Wash Series
Controllers
Testing Circumstance
DMX Channels
LED Panorama Wash
(Direct DMX)
LED Panorama Wash can be operated standalone, master slave with built in pre-programmed effects or directly with and
standard DMX-512 controller. The LED Panorama Wash is engineered with push button waterproof external LED display
based user interface for setting the mode of operation or DMX Address. The LED Panorama Wash uses only 3 Channels
of DMX to enable external programming of linear color changing, step based scenes as desired by the lighting designer.
You can also add an easy to use pre-programmed external controller if you are DMX challenged such as the SRC-AI-100.
The DMX-Address is written to the fixture using the SRC-AI-100 as well as providing a standalone control solution For
more information on controller functionality refer to the control section of this catalog.
The LED Panorama Wash housing is composed of Aluminum Die Cast fixture housing, with a clear polycarbonate
aperture cap, rated at IP65. The LED Panorama Wash has a very low profile and narrow footprint which makes it perfect
for applications where there is little room to install larger fixtures such as window ledges and coving. The housing has
also been designed to have a professional commercial look and appeal which makes the LED Panorama wash ideal for
applications where the fixture itself can be seen.
162
163
LED Wash Series
LED Panorama Wash is a new style of energy saving, LED based, wash fixture,incorporating High power LEDs, The color is
available in RGB color changing,AW white color Temperature Changing, single color Amber, Blue and White.
(RGB)
(Amber)
Specifications
Item No.
LW-340-PC-120V/240V-RGB
Light Source
Qty. of LEDs
Beam Angle
Light Projecting Distance
Fixture Housing
Signal Connector
Power Connector
Control System
DMX Channels
1W power LED
18pcs (R6, G6, B6)
25˚C
20m
Die cast aluminum coated with clear PC aperture
3-Pin control and installation type dependant
3-Pin molded connector
DMX-512 or standalone with SRC-AI-100
3 channels
LW-340-PC-120V/240V-CTC
(White Color Temperature Changing)
18pcs (A6, W12)
25˚C
DMX-512
Electrical specification
Operating Voltage
Operating Current
Power
IP Rating
90~264V AC/24V DC
0.14A
30W
IP65
Environmental Specifications
Application Temperature
Dimensions
Weight
164
(White)
-20˚C~ 40˚C
L343xW90xH50.5mm
1.5 Kg
Item No.
LW-340-PC-120V/240V-A
Light Source
Qty. of LEDs
Beam Angle
Light Projecting Distance
Fixture Housing
Signal Connector
Power Connector
Control System
DMX Channels
1W power LED
18pcs (A18)
18pcs (B18)
25˚C
20m
Die cast aluminum coated with clear PC aperture
3-Pin control and installation type dependant
3-Pin molded connector
DMX-512 or standalone with SRC-AI-100
3 channels
LW-340-PC-120V/240V-B
LW-340-PC-120V/240V-W
18pcs (W18)
LED Wash Series
Specifications
(Blue)
Electrical specification
0.212A
25W
Operating Voltage
Operating Current
Power
IP Rating
90~264V AC/24V DC
0.1A
Max.26W
IP65
Environmental Specifications
Application Temperature
Dimensions
Weight
-20˚C~ 40˚C
L343xW90xH50.5mm
1.5 Kg
165
Due to the limitation of the type set, this catalog’s specifications for each fixture may not be shown.
For more information on other models please contact your Neo-Neon™ Sales Associate.
LW-340-PC-120V-RGB
DMX Function Chart
Candle Power Distribution
Mode
-180o 180o
-60o
-30
60
1 Pixel
o
DMX Channels
3
30o
o
Value
Function
1
Channel
Red
Name
0-255
0-100% Intensity
2
Green
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
DMX Function Chart
-90
o
90
o
Mode
1 Pixel
300
60o
-60o
DMX Channels
3
Value
Function
1
Channel
Amber
Name
0-255
0-100% Intensity
2
White
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
600
30o
-30o
90o
0
o
Testing Result
Demo Kit
Purchase a demo kit for the LED Panorama Wash to promote
sales of this exciting new product. (Sold Separately)
883.73cd
23˚
Connection Example (DMX 512 or SRC-AI-100)
Light Output
Color
Total Output (lumens)
power (watts)
Efficacy (lm/w)
White
589.3
30.8
19.1
Red
236.9
16.8
14.1
Green
290.8
17.2
16.9
Blue
90.1
18.3
4.9
LW-340-PC-120V-W
Example 2-Expanded (When more than 30
Fixtures from one controller is required)
Add (1) Signal Amplifier SDL-109A-T1 between
each group of 30 fixtures. See Page# P414-419
of this catalog for more information on the
SDL-109A-T1 Signal Amplifier. The maximum
distance should not extend 150m between
controller and the last lighting fixture.
Example 1
LED Wash Series
Max. luminous intensity
Beam angle
(When more than 30 Fixtures from one controller is required and the distance of more than 150 Meters
distance between the controller and last fixture is required)
Add (1) Signal Amplifier SRC-143 for every 4 groups of 30 fixtures (120 Total per SRC-143) Connect the
output of the first SRC-143 to the input of the next SRC-143 to add additional groups.
See Page# P408-411 of this catalog for more information on the SRC-143 Signal Amplifier.
Available Interconnection Cables
XLR-Male to Mini Female XLR
Part# XLRM-M-XLRF
Candle Power Distribution
XLR-Female to Mini Male XLR
Part# XLRF-M-XLRM
Controllers
DMX-512 Mode Requires
DMX-512 Controller
SRC-AI-100 Address Writer
(Page P414-419)
Stand-Alone Mode Requires
SRC-AI-100 as Address Writer and
Controller (Page P414-419)
Testing Result
Max. luminous intensity
Beam angle
For Large Configurations of more
than 30 LED Panorama Washes you
will need to add the SRC-143 Signal
Amplifier (Page P408-411) which can
operate up to 120 fixtures each.
814.47cd
40˚
Light Output
Color
Total Output (lumens)
power (watts)
Efficacy (lm/w)
White
830.7
47
17.7
Warm
245.2
24.7
9.9
Cool
610.6
40
15.3
Example 2
DMX-512 or SRC-AI-100
Up to 30 units can be connected in this configuration without the need for a signal amplifier. See Example 2
for larger applications and requirements.
Illuminance
Distance(m)
1
Color
1943.5
White
258.3
Red
805.5
Green
166
2
3
4
5
486.1
67.0
205.5
250.4
30.5
96.9
135.1
20.2
52.3
75.6
12.3
37.8
167
LED Pro Wash RGB/AW
(High Power LED)
(Outdoor Direct DMX)
LED Pro Wash RGB is a professional, energy savings, high power, architectural / architainment, stage, commercial, club,
wash fixture which covers all the applications where smooth, rich color wash is required.
The LED Pro Wash RGB from Neo-Neon incorporates all of the functionality required to be applied professionally. With
5 program cues available, each program can contain a maximum of 10 scenes with 36 timed events that can be set to any
desired clock time.
The LED Pro Wash RGB also has a built in thermal sensor to enable operations below 60°C. Whether operated with DMX512, Stand-alone or, via the built in sophisticated “yet simple to operate”1 time/scene selection system the LED Pro Wash
RGB delivers professional results.
LED Pro Wash RGB/AW
Correlatively, there is LED Pro Wash AW which adopts Amber and White LED and functions as color temperature
adjustable.
Patented (China)
Patent Pending (Globally)
168
169
LED Wash Series
The LED Pro Wash RGB contains 24 3W and 1W RGB Power LEDs to enable 16.7M true 24-Bit linear color control.
(RGB)
(White)
Candle Power Distribution
Specifications
Light Source
Voltage
Power
Qty of LEDs:
PAN Adjustable
TILT Adjustable
Optical Angle
Demension
Weight
IP Rating
Control System
DMX Channels
SRL-6349
SRC-6349W
180∞
0.8
High Power LED
AC100-240V 50-60HZ
110W
24pcs 1W Red LED
18pcs 3W Green LED
7pcs 3W Blue LED
-15˚-75˚
-50˚-50˚
25˚
L376xW232xH432mm
13.5KG
IP65
DMX-512,Auto,Timed Play back
8 Channels
0.6
0.4
42pcs 3W white LED
3pcs 3W Amber LED
0.2
270∞
0.8
0.6
0.4
0.2
0.0
0.2
0.4
0.6
0.8
90∞
0.2
0.4
0.6
LED Wash Series
Item NO.
0.8
0∞
Testing Circumstance
Installation position
Testing surface
Horizontal
A-A surface
Electrical Parameters
Current
Voltage:
Power consumption
DMX Value Channels 8
1
Shutter/Strobe
2
3
4
5
6
Dimmer
Red
Green
Blue
Colour temperature
7
8
170
Macro channe
White balance control
0-3
4-6
7 - 59
60 - 69
70 - 78
79 - 87
others
0—255
0—255
0—255
0—255
0 - 19
20 - 255
0-7
8 - 15
16 - 23
24 - 31
32 - 39
40 - 47
48 - 55
56 - 63
64 - 70
71
72 - 79
80 - 87
0 - 63
64 - 189
190 - 250
251 - 255
Shutter closed
Shutter open
Strobe effect (1-20 Hz)
Pulse Strobe effect open
Pulse Strobe effect closed
Random strobe effect (high speed to low speed)
Shutter open
OFF
From Cold + 2000 K° to Warm - 2000 k°
compared to balanced white or not
NO MACRO
MACRO 1 Rainbow Slow - Hold Time 5 sec
MACRO 2 Rainbow Medium - Hold Time 5 sec
MACRO 3 Rainbow Fast - Hold Time 5 sec
MACRO 4 Rainbow Slow - NO Hold time
MACRO 5 Rainbow Medium - NO Hold time
MACRO 6 Rainbow Fast - NO Hold time
MACRO 7 Rainbow Very slow - NO Hold time
MACRO 8 Random Colour Slow
Store Colour-mode enable
MACRO 9 Random Color Medium
MACRO 10 Random Color Fast
White balance disabled (Full Colour)
White balance enabled (Balanced)
White balance disabled (Full Colour)
User writable white balance
0.49 A
220V
110W
Testing Result
Max. luminous intensity 1022.806cd
Luminous flux
760.0lm
Efficacy
11.0lm/w
Beam angle
28˚
Remark
Controlling standard voltage 220V
Illuminance Distribution
60.1
70.4
83.4
101.0
117.7 124.3
108.6
90.3
74.9
63.7
76.2
97.5
155.1 248.6
314.0 308.4
240.2
153.3
129.1
77.6
101.9 163.6
32.6
751.4 684.1
473.8
265.4
145.9
94.4
136.4 269.2
629.9 1047.7 1242.0 1157.9 829.9
475.7
220.6
118.7
156.1 370.1
801.9 1255.1 1619.6 1535.5 1114.0 630.8
281.3
141.1
147.7 329.9
746.7 1205.6 1296.0 1528.9 1129.9 680.4
298.1
142.1
128.9 237.4
529.9 923.4
1203.7 1213.1 943.9
542.9
246.7
120.6
103.7 154.2
291.6 550.5
752.3 761.7
567.3
306.5
144.9
92.5
89.7
112.1
152.3 240.2
317.8 315.9
214.9
135.5
93.5
71.0
72.9
86.9
100.9 116.8
129.9 121.5
101.9
81.3
67.3
57.0
0.5M
Units:
Color:
Direction:
Testing Distance:
Multipliers:
Watts:
593.5
0M
0.5M
Illuminance
Distance(m)
1
Color
1724.3
White
213.1
Red
700.9
Green
937.4
Blue
0M
2
3
4
5
456.1
57.0
185.9
242.9
208.4
27.1
85.9
110.3
118.1
15.2
47.9
62.4
74.6
9.3
30.4
40.4
Unit: Lux
Direction: On axis
0.5M
Lux
RGB
On axis
1m
0.115 Red, 0.378 Green, 0.506 Blue
110W(RGB),200W(AW)
171
(RGB)
(White)
Specifications
Color Range
Light Source
Beam Angel
Data Interface
Control System
Bean Angle
Distribution
Dimensions
Fixture Housing
Connector
Weigh
LW-240-PC-48V
RGB 16.7 Million Colors True 24-Bit Linear
Power LED
25°
SRC-255PSU (Stand-alone and DMX)
SRC-255PSU controller/SRC-255PSU controlled by DMX512
28° (at 50% of peak illuminance)
Symmetric direct illumination
248X124X63mm
Aluminum powder coated black
4 Pin In and Through
1.5Kg
LW-240-PC-W
Power LED (WLED) White LED
12x1W (WLED) Cool White
NA
NA
25°
NA
NA
LED Wash Series
Item No.
Electrical specification
(c) Interlite, Stage design Jan Schedin
Input Voltage
Maximum Wattage
48V DC
18W
Environmental specification
Working Temperature
-20°C~+40°C
Dimensional DIagram
LED Mini Array
(RGB and (WLED) Whtie LED)
(High Power LED) (Indoor)
(Non-Direct DMX)
LED Mini Array is new indoor Power LED based Array System that offers extreme versatility for a wide variety
of applications. The LED Mini Array RGB version enables full 16.7M color true 24-Bit linear color changing.
The (WLED) White LED Version incorporates Power Led 1W White LED’s which enables dimmable white wash,
punch in and out, strobe, and is the new high tech replacement for the micro blinder.
Array Connection Opfions
This products can be connected in series in different arrays
1. Vertical/Horizonta linear connecttion
2. Matrix block connection
2
1
LED Mini Array is configurable into 4 different array configurations due to the unique design, interconnection
method, and array hardware kit. Each unit can connect to each other using professional butterfly clasps. The
4-pin M-F data in and through angled connector design, enables the easy interconnection of up to (5) units
per SRC-255-PSU controller.
LED Mini Array is non-direct DMX controllable and can be operated in standalone, and DMX-512 control via
the SRC-255 PSU controller. For more information about the functionality of the SRC-255PSU controller refer
to Page# P502-507 of this catalog.
172
173
DMX Function Chart
LW-240-PC-48V (RGB)
Candle Power Distribution
Measured on
Beam center
Thin dashed lined
Multipliers
White
1503.21cd
Indicates 50% of peak value
0.33Red, 0.33Green, 0.33Blue
Light Output
White
276.2
38.1
7.2
Red
77.2
25.5
3.0
Green
158.3
23.7
6.7
Blue
47.2
24.3
1.9
Illuminance at Distance
4.2
8
3.0”/ 1.0m
15
5
Controllers and Control Options
2
DMX-512 Mode Requires
DMX-512 Controller
SRC-255PSU Controller (Page P414-419)
0”/ 0m
3.0”/ 1.0m
WHITE
RED
GREEN
BLUE
27.7
474.2
55.9
599.1
10.6
113.8
132
297
1188.3
44.3
12.3
4.9
11
118.5
13.9
149.7
2.6
28.5
52.6
6.2
66.5
1.2
12.6
5m
4m
3m
2m
1m
111
15”
12”
9”
6”
SRC-143
Stand-Alone Mode Requires
SRC-255PSU Controller (Page P414-419)
Beam center
Beaming Angel
751.52cd
22.5°(Horizontal) 22.5°(Vertical)
For Large Configurations of more than 30 LED
Mini Array units (6 SRC-255PSU units) you will
need to add the SRC-143 Signal Amplifier (Page
P414-419)
2. DMX-512 control
Light Output
Illuminance
3”
SRC-255PSU controller
8
Units:
Lx
Distance from surface: 3.0”/1.0m (from center of grid)
Measured on:
White
Multipliers:
0.33 Red 0.33Green 0.33Blue
color
1. Without DMX control
0”/ 0m
0.1
4
5
5
4
2
Standalone with SRC-2565PSU Controller
0.4
0.3
0.4
0.4
0.3
44
44
15
5
0.1
7
34
1.4
4.1
4.1
Connection Examples
0.6
0.7
4.2
41.6
41.6
46
449
449
46
1.4
0.4
4
11
205
205
34
7
0.7
Candle Power Distribution
0.3
3.2
19
19
3.2
23
23
11
4
0.6
LW-240-PC-W
2
4
0.9
2.2
2.2
0.9
5
5
4
2
0.3
3.0”/ 1.0m
0.1
0.3
0.4
0.4
0.3
0.1
Controller
(Required for Standalone and DMX control)
LED Wash Series
Color
Total Output (lumens)
power (watts)
Efficacy (lm/w)
4.5
6.9
Color
Total Output (lumens)
power (watts)
Efficacy (lm/w)
White
276.2
38.1
7.2
47.5
74.2
1.8
2.8
18.9
29.6
2.2
3.5
23.9
37.4
0.4
0.7
7.1
4.5
Measured in Footcandles/ Lux on axis
SRC-143
174
175
LED Wash Series
* Private Villa, Kowloon, Hong Kong, P.R. China
(Ultra Bright LED)
(Indoor and Outdoor)
(Direct DMX)
LED Vivid Linear Wash I is an energy saving, LED based, multiple pixel based wash fixture,
Incorporating 540, 1080, or 1620 Ultra Bright or Super Bright LEDs depending on model. The
LED Vivid Linear Wash I are RGB full color 16.7M true 24 Bit color changing Linear Wash
Fixtures.
LED Purity Linear Wash I AWB (Amber White Blue) Color Correlated Temperature (CCT) linear
Color temperature control from 2000, to 10,000K, and single color (A/W/B), and single color
(A/W/B) Amber, White, Blue, “Cool” White with Warm White (WWW), Warm White (WW),
and Ultra Warm White (UWW).
LED Vivid and Purity Linear Wash I (RGB, CCT Color Correlated Temperature,) we term as
“controllable” fixtures can be operated standalone, master slave with built in pre-programmed
effects or directly with and standard DMX-512 controller. The LED Vivid and Purity Linear Wash
I “controllable” fixtures are engineered with push button waterproof external LED display
based user interface for setting the mode of operation or DMX Address. The LED Vivid and
Purity Linear Wash I “controllable” fixtures use only 3 Channels of DMX to enable external
176
LED Vivid Linear Wash I(RGB)
LED Purity Linear Wash I
programming of linear color changing, step based scenes as desired by the
lighting designer. You can also add an easy to use pre-programmed external
controller if you are DMX challenged such as the SRC-WASHER-100A. For more
information on controller functionality refer to the control section of this
catalog.
LED Vivid Purity Wash I series fixtures have many variants
such as
Single color versions are On and Off only and are direct to AC intelligent
fixtures.
(WWW) Cool White and Warm White Mix are new versions with linear CCT
control from 2,000K to 10,000K which offers a different theory to CCT than
AWB versions.
(WW) Warm White is populated with only one (K) Kelvin Temperature of
Warm White LEDs for applications that require single color incandescent
energy savings wash effect. (CCT(K) as specified at time of order)
(UWW) Ultra Warm White is populated with Ultra Warm White “true
incandescent” looking LEDs for applications that require single color
incandescent energy savings wash effect.
The LED Vivid and Purity Linear Wash I fixture housings are composed of
Aluminum Extruded fixture housing, aluminum machined hardware, heat
treated glass aperture plate. LED Vivid and Purity Linear Wash I fixtures come
in either indoor or outdoor versions.
Neo-Neon gives you more ways to Wash with LED illumination than any other
manufacturer. Since there are so many choices of LED Vivid and Purity Linear
Wash I fixtures we have added a new order code description section to help
you make your choice.
177
(RGB)
(RGB)
(RGB)
(AWB)
Item NO.
LW-600x130-REVO-UB/SB-INDP-120V/240V
LW-1200x130-REVO-UB/SB-INDP-120V/240V
LW-1800x130-REVO-UB/SB-INDP-120V/240V
LW-600x130-REVO-UB/SB
LW-1200x130-REVO-UB/SB
LW-1800x130-REVO-UB/SB
LW-600x130-REVO-UB/SB-INDOOR
LW-1200x130-REVO-UB/SB-INDOOR
LW-1800x130-REVO-UB/SB-INDOOR
LW-600x130-REVO-UB-AWB
LW-1200x130-REVO-UB-AWB
LW-1800x130-REVO-UB-AWB
AWB (Amber White Blue) Color Correlated Temperature (CCT) linear Color
temperature control from 2000, to 10,000
Color Range
RGB 16.7M Colors True 24-Bit Linear
RGB 16.7M Colors True 24-Bit Linear
Light Source
Light projecting distance
DMX-512
DMX Channels
Control Modes
Fixture Housing
Ultra Bright LED / Super Bright LED
20m
Direct DMX Control
3
Stand-Alone, Direct DMX 512, or SRC-WASHER-100
Extruded Aluminum Profile with Machined Aluminum End Caps and
Hardware
Tempered glass
Standard signal cord and power cord
3-Pin XLR (In and Through)
0 ~ 300°
45°
5.35Kg
9.1Kg
13.5Kg
L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm
Ultra Bright LED / Super Bright LED
20m
Direct DMX Control
3
Stand-Alone, Direct DMX 512, or SRC-WASHER-100
Extruded Aluminum Profile with Machined Aluminum End Caps and
Hardware.
Tempered glass
Standard signal cord and power cord
3-Pin XLR (In and Through)
0 ~ 300°
45°
5.35Kg
9.1Kg
13.5Kg
L690xW137.5XH139mm
L1290xW137.5XH139mm
L1890xW137.5XH139mm
5.35Kg
L690xW137.5XH139mm
9.1Kg
L1290xW137.5XH139mm
13.5Kg
L1890xW137.5XH139mm
90-264V AC/12V DC
(note: the current of each LED will be calculated as a
unit of 20mA, but there might be a slight difference on Vf)
(R,G,B ALL OFF): 200mA+/-20mA
960mA+/-40mA
1920mA+/-40mA
2880mA+/-40mA
1600mA+/-40mA
3200mA+/-40mA
4800mA+/-40mA
1600mA+/-40mA
3200mA+/-40mA
4800mA+/-40mA
4160mA+/-100mA
8320mA+/-100mA
12480mA+/-100mA
75W
120W
220W
NA
NA
NA
NA
NA
50W
100W
150W
-20°C ~ +40°C
NA
IP65 (For Indoor Version Add “Indoor” to the order code)
Aperture Cover
Connecting Mode
Connector
Swing Angle
Beam Angle
Weight
Dimensions
5.35Kg
L690xW137.5XH139mm
9.1Kg
L1290xW137.5XH139mm
13.5Kg
L1890xW137.5XH139mm
Electrical Specifications
Operating Voltage
Operating Current
90-264V AC/12V DC
When system is not on
Current on Static Red
Current on Static Green
Current on Static Blue
Current on R,G,B
Power consumption
NA
NA
NA
NA
NA
75W
120W
220W
(note: the current of each LED will be calculated as a
unit of 20mA, but there might be a slight difference on Vf)
(R,G,B ALL OFF): 200mA+/-20mA
960mA+/-40mA
1920mA+/-40mA
2880mA+/-40mA
1600mA+/-40mA
3200mA+/-40mA
4800mA+/-40mA
1600mA+/-40mA
3200mA+/-40mA
4800mA+/-40mA
4160mA+/-100mA 8320mA+/-100mA 12480mA+/-100mA
75W
120W
220W
Environmental Specifications
Operating Temperature
IP Rating
-20°C ~ +40°C
IP65 (For Indoor Version Add “Indoor” to the order code.)
Dimensional DIagram
178
179
LED Wash Series
Specifications
(Amber )
(White)
(Blue )
Specifications
Light Source
Light Quantity
Beam Angle:
Light Projecting Distance
Fixture Housing
Connecting Mode
Weight
Dimensions
LW-600x130-REVO-UB/SB-W
LW-1200x130-REVO-UB/SB-W
LW-1800x130-REVO-UB/SB-W
LW-600x130-REVO-UB/SB-A
LW-1200x130-REVO-UB/SB-A
LW-1800x130-REVO-UB/SB-A
Ultra Bright LED / Super Bright LED
Amber 540
Amber 1080
Amber 1620
45°
20m
Aluminum alloy
Power cable
5.35Kg
9.1Kg
13.5Kg
L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm
LW-600x130-REVO-UB/SB-B
LW-1200x130-REVO-UB/SB-B
LW-1800x130-REVO-UB/SB-B
5.35Kg
9.1Kg
13.5Kg
L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm
Ultra Bright LED / Super Bright LED
Blue 540
Blue 1080
Blue 1620
45°
20m
Aluminum alloy
Power cable
5.35Kg
9.1Kg
13.5Kg
L690xW137.5XH139mm L1290xW137.5XH139mm L1890xW137.5XH139mm
50watts
90-264V AC/12V DC
50watts
100watts
White 540
White 1080
White 1620
LED Wash Series
Item No.
Electrical Specifications
Operating Voltage
Power Consumption
90-264V AC/12V DC
50watts
100watts
150watts
100watts
150watts
150watts
Environmental Specifications
Operating Temperature
IP Rating
180
-20°C ~ +40°C
IP65 (For Indoor Version Add “Indoor” to the order code.)
-20°C ~ +40°C
IP65 (For Indoor Version Add “Indoor” to the order code)
181
Due to the limitation of the type set, this catalog’s specifications for each fixture may not be shown.
For more information on other models please contact your Neo-Neon™ Sales Associate.
LW-1800x130-REVO-UB/SB (RGB)
Candle Power Distribution
DMX Function Chart
Mode
1 Pixel
DMX Channels
Channel
3
Name
Value
Function
1
Red
0-255
0-100% Intensity
2
Green
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
Vivid Wash III is available in Black or White Finish Standard.
Custom Finishes upon request (Volume Dependant)
DMX Function Chart
Mode
1 Pixel
DMX Channels
Channel
Name
Value
Function
1
Amber
0-255
0-100% Intensity
2
White
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
3
Testing circumstance
Installation Position
Testing Surface
Horizontal
A-A surface
Current
Voltage
Power consumption
Illuminance Distribution
70.5
80.4
92.6
116.3
129.4 137.4
118.7
102.5
84.3
75.5
81.1
104.3
167.2 258.1
324.1 314.4
248.1
162.4
137.1
85.3
112.4 173.1
334.1 601.1
762.5 694.1
581.6
272.3
157.2
102.2
142.8 272.3
634.7 1057.3 1263.0 1157.9 839.1
782.5
234.7
124.6
162.3 380.4
812.4 1265.5 1626.6 1547.5 1125.0 643.1
292.3
151.3
157.7 338.9
753.2 1243.2 1301.1 1534.1 1141.2 692.1
299.1
153.1
137.7 246.9
535.2 937.8
1214.0 1224.3 952.6
552.1
257.9
133.1
112.0 167.2
298.6 561.3
761.3 772.7
573.3
319.5
152.1
102.3
94.3
123.0
162.1 263.2
317.8 321.0
224.3
141.5
103.5
81.0
82.9
93.9
112.3 123.7
132.6 134.5
112.5
95.0
78.2
70.6
0.5M
Units:
Color:
Direction:
Multipliers:
0M
Lux
White Balanced
On axis
0.115 Red, 0.378 Green, 0.506 Blue
0.5M
0.68 A
220V
150W
Connection Example
Testing result
Max. luminous intensity
Luminous flux
Efficacy
Beam angle
Remark
6136.836cd
2224.2lm
11.029Lm/w
25˚
Controlling standard voltage 220V power
Illuminance
0M
Distance(m)
1
Color
1943.5
White
258.3
Red
805.5
Green
885.5
Blue
2
3
4
5
486.1
67.0
205.5
250.3
250.4
30.5
96.9
135.3
135.1
20.2
52.3
70.5
75.6
12.3
37.8
46
Controllers
DMX-512
SRC-WASHER-100A
DMX 512 or SRC-WASHER-100A
Example 1
Up to 30 units can be connected in this configuration without the need for a signal amplifier. See Example 2
for larger applications and requirements.
For more information regarding DMX Control
and the Order Code Descriptions See Page
P414-419 located at the end of this section.
Example 1-Expanded (When more than 30 Fixtures from one controller is required)
Add (1) Signal Amplifier SDL-109A-T1 between each group of 30 fixtures. See Page# 414-419 of this
catalog for more information on the SRC-143 Signal Amplifier.
The maximum distance should not extend 150m between controller and the last lighting fixture
Unit: Lux
Direction: On axis
0.5M
Example 2
(When more than 30 Fixtures from one controller is required and the distance of more than 150 Meters
distance between the controller and last fixture is required)
Add (1) Signal Amplifier SRC-143 for every 4 groups of 30 fixtures (120 Total per SRC-143)
Connect the output of the first SRC-143 to the input of the next SRC-143 to add additional groups.
See Page# P414-419 of this catalog for more information on the SRC-143 Signal Amplifier.
LW-1800x130-REVO-UB/SB -W (White Balanced)
Candle Power Distribution
Illuminance
Distance(m)
1
Color
10345
White
2
3
4
5
2736.6
1250.4
708.6
447.6
Unit: Lux
Direction: On axis
182
183
LED Wash Series
Electrical parameters
(Power LED)
(Indoor and Outdoor)
(Direct DMX)
LED Vivid and Purity Linear Wash II fixtures are exactly like the LED Vivid Wash I with the
exception of the LED type. With the advancement of LED technology Power LED 1W LED’s and
new beam angle lens solutions made it possible to create the LED Vivid Linear Wash II Series.
LED Vivid Linear and Purity Wash II fixtures are energy saving, LED based, multiple pixel based
wash fixture, Incorporating Power LED 1W LEDs depending on model.
Vivid and Purity Linear Wash II “controllable” fixtures use only 3 Channels of
DMX to enable external programming of linear color changing, step based
scenes as desired by the lighting designer. You can also add an easy to use
pre-programmed external controller if you are DMX challenged such as the
SRC-WASHER-100A. For more information on controller functionality refer to
the control section of this catalog.
The LED Vivid Linear Wash II fixtures are RGB full color 16.7M true 24 Bit color changing Linear
Wash Fixtures.
LED Vivid Purity Wash II series fixtures have many variants
such as
LED Purity Linear Wash II fixtures are AWB (Amber White Blue) Color Correlated Temperature
(CCT) linear Color temperature control from 2000, to 10,000K, and single color (A/W/B), and
single color (A/W/B) Amber, White, Blue, “Cool” White with Warm White (WWW), Warm
White (WW), and Ultra Warm White (UWW).
Single color versions are On and Off only and are direct to AC intelligent
fixtures.
LED Vivid and Purity Linear Wash II (RGB, CCT Color Correlated Temperature,) we term as
“controllable” fixtures can be operated standalone, master slave with built in pre-programmed
effects or directly with and standard DMX-512 controller. The LED Vivid and Purity Linear
Wash II “controllable” fixtures are engineered with push button waterproof external LED
display based user interface for setting the mode of operation or DMX Address. The LED
184
(WWW) Cool White and Warm White Mix are new versions with linear CCT
control from 2,000K to 10,000K which offers a different theory to CCT than
AWB versions.
(WW) Warm White is populated with only one (K) Kelvin Temperature of
Warm White LEDs for applications that require single color incandescent
energy savings wash effect. (CCT(K) as specified at time of order)
(UWW) Ultra Warm White is populated with Ultra Warm White “true
incandescent” looking LEDs for applications that require single color
incandescent energy savings wash effect.
** Due to typeset limitations the new WWW, WW, UWW, versions
specifications are not included in this catalog. For more information on how
to order these versions see the order code information in this catalog and ask
your Neo-Neon™ Sales Associate for more information.
The LED Vivid and Purity Linear Wash II fixture housings are composed of
Aluminum Extruded fixture housing, aluminum machined hardware, heat
treated glass aperture plate. LED Vivid and Purity Linear Wash II fixtures come
in either indoor or outdoor versions.
Neo-Neon gives you more ways to Wash with LED illumination than any other
manufacturer. Since there are so many choices of LED Vivid and Purity Linear
Wash II fixtures we have added a new order code description section to help
you make your choice.
185
LED Wash Series
LED Vivid Linear Wash II(RGB)
LED Purity Linear Wash II
(RGB)
(RGB)
(AWB)
3 or 5-Channel DMX
Control Versions
(3 or 5-Channel DMX Control
CCT Adjustable)
LW-600x130-REVO-PC-120V/240V
LW-1200x130-REVO-PC-120V/240V
LW-1800x130-REVO-PC-120V/240V
Item NO.
LW-600x130-REVO-PC-INDP
LW-1200x130-REVO-PC-INDP
LW-1800x130-REVO-PC-INDP
LED Color Range
Different brightness of red, green & blue LED combined to produce
16.7million colors.
Light Source
Light Projecting Distance
Data Interface
Control System
DMX Channels
Fixture Housing
Connecting Mode
Connector
Swing Angle
Beam Angle
Weight
1W High Power LED
20m
Standard DMX512
DMX512 console or SRC-WASHER-100 controller
See DMX Function Chart
Die Cast Powder Coated Aluminum
Standard signal cord and power cord
(3 or 5) Model Dependant and Order Code Dependant (See page 502-507)
0 ~ 300°
25°
6.5Kg (600x130)
11.5Kg (1200x130)
15Kg (1800x130)
LW-600x130-REVO-PC-AWB
LW-1200x130-REVO-PC--AWB
LW-1800x130-REVO-PC--AWB
Amber, White & Blue LEDs combined
to produce different brightness
colors of different color temperatures
(3000K~14000K).
Power Consumption
90-264V AC/24V DC
4.5A (600x130)
9.6A (1200x130)
14A (1800x130)
108W (600x130
225.6W (1200x130)
336W (1800x130)
Environmental Specifications
Operating
IP Rating
Temperature
-20°C ~ +40°C
IP65
LED Color Range
Light Source
Light Projecting Distance
Digital Interface
Control System
DMX Channels
Fixture Housing
Aperture Glass
Connecting Mode
Connector
Swing Angle
Beam Angle
Weight
Color temperature range
LW-600x130-REVO-PC-CU
LW-1200x130-REVO-PC-CU
LW-1800x130-REVO-PC-CU
LW-600x130-REVO-PC-WY-CU
LW-1200x130-REVO-PC-WY-CU
LW-1800x130-REVO-PC-WY-CU
RGB 16.7M Colors True 24-Bit Linear
1W High Power LED
20m
Standar DMX compatible
DMX512
See DMX Function Chart
Die Cast Powder Coated Aluminum
Tempered Glass
Standard signal cord and power cord
3-pin signal connector
0 ~ 300°
25°
6.5Kg (600x130)
11.5Kg (1200x130)
15Kg (1800x130)
NA
2000-10.000K CCT Adustisic
1700K-14000K
Electrical Specifications
Electrical Specifications
Operating Voltage
Operating Current (Max)
Item NO.
LED Wash Series
Specifications
90-264V AC/24V DC
4A (600x130)
8A (1200x130)
12A (1800x130)
96W (600x130
192W (1200x130)
288W (1800x130)
Operating Voltage
Operating Current (Max)
Power Consumption
90-264V AC/24V DC
4.5A (600x130)
9.4A (1200x130)
14A (1800x130)
108W (600x130
225.6W (1200x130)
336W (1800x130)
Environmental Specifications
Operating
IP Rating
Temperature
-20°C ~ +40°C
IP65
Built in Pre-Programmed Effects
Hold Color
Strobing
Cross Fade
Chasing
Color Cycle
Selectable HOLD color. (16.7M variables)
Single color or transitional
Cross Fade Between Colors
Color Chasing
Cycling
Dimensional DIagram
186
187
(Amber)
(White)
(Blue)
(Yellow)
Technical Specifications
LW-600x130-REVO-PC-A
LW-1200x130-REVO-PC-A
LW-1800x130-REVO-PC-A
Light Source
Light Quantity
Beam Angle
Light Projecting Distance
Fixture Housing
Connecting Mode
Aperture Glass
Weight
Dimensions
1W High power LED
Amber60
Amber120
Amber180
White60
25°
20m
Die Cast Powder Coated Aluminum
Power supply cable
Tempered Glass
6.5Kg (600x130) / 11.5Kg (1200x130) / 15Kg (1800x130)
L690xW137.5xH139mm / L1290xW137.5xH139mm / L1890xW137.5xH139mm
White120
LW-600x130-REVO-PC-B
LW-1200x130-REVO-PC-B
LW-1800x130-REVO-PC-B
White180
LW-600x130-PC-Y
LW-1200x130-PC-Y
LW-1800x130-PC-Y
1W High power LED
Blue60
Blue120
Blue180
Yellow60
25°
20m
Die Cast Powder Coated Aluminum
Power supply cable
Tempered Glass
6.5Kg(600x130) / 11.5Kg (1200x130) / 15Kg (1800x130)
L690xW137.5xH139mm / L1290xW137.5xH139mm / L1890xW137.5xH139mm
Yellow120
LED Wash Series
LW-600x130-REVO-PC-W
LW-1200x130-REVO-PC-W
LW-1800x130-REVO-PC-W
Item No.
Yellow180
Electrical Specifications
Operating Voltage
Operating Current
Power Consumption
90-264V AC/24V DC
Max.4A (600x130) / Max.8A (1200x130) / Max.16A (1800x130)
96W (600x130) / 192W (1200x130) / 288W (1800x130)
90-264V AC/24V DC
Max.4A (600x130) / Max.8A (1200x130) / Max.16A (1800x130)
96W (600x130) / 192W (1200x130) / 288W (1800x130)
85-264V AC/24V DC
Environmental Specifications
Operating Temperature
IP Rating
188
-20°C ~ +40°C
IP65
-20°C ~ +40°C
IP65
189
Due to the limitation of the type set, this catalog’s specifications for each fixture may not be shown.
For more information on other models please contact your Neo-Neon™ Sales Associate.
DMX Function Chart
LW-1800x130-REVO-PC (RGB)
Candle Power Distribution
Testing Circumstance
Installation position
Testing surface
Horizontal
A-A surface
Current
Voltage
Power consumption
Illuminance Distribution
70.5
80.4
92.6
116.3
129.4 137.4
118.7
102.5
84.3
75.5
81.1
104.3
167.2 258.1
324.1 314.4
248.1
162.4
137.1
85.3
112.4 173.1
334.1 601.1
762.5 694.1
581.6
272.3
157.2
102.2
142.8 272.3
634.7 1057.3 1263.0 1157.9 839.1
782.5
234.7
124.6
162.3 380.4
812.4 1265.5 1626.6 1547.5 1125.0 643.1
292.3
151.3
157.7 338.9
753.2 1243.2 1301.1 1534.1 1141.2 692.1
299.1
153.1
137.7 246.9
535.2 937.8
1214.0 1224.3 952.6
552.1
257.9
133.1
112.0 167.2
298.6 561.3
761.3 772.7
573.3
319.5
152.1
102.3
94.3
123.0
162.1 263.2
317.8 321.0
224.3
141.5
103.5
81.0
82.9
93.9
112.3 123.7
132.6 134.5
112.5
95.0
78.2
70.6
0.5M
Units:
Color:
Direction:
Testing distance:
Multipliers:
0M
Lx
White
On axis
1m
0.115 Red, 0.378 Green, 0.506 Blue
0.5M
1.253A
220V
288W
Controllers
Testing Result
Max. luminous intensity
Luminous flux
Efficacy
Beam angle
Remark
DMX-512
SRC-WASHER-100A
6136.836cd
2224.2Lm
11.029lm/w
28˚
Controlling standard voltage 220V
Distance(m)
1
Color
1943.5
White
258.3
Red
805.5
Green
885.5
Blue
DMX 512 or SRC-WASHER-100A
Example 1
Up to 30 units can be connected in this configuration without the need for a signal amplifier. See Example 2
for larger applications and requirements.
For more information regarding DMX Control
and the Order Code Descriptions See Page
P414-419 located at the end of this section.
Illuminance
0M
Connection Example
2
3
4
5
486.1
67.0
205.5
250.3
250.4
30.5
96.9
135.3
135.1
20.2
52.3
70.5
75.6
12.3
37.8
46
Example 1-Expanded (When more than 30 Fixtures from one controller is required)
Add (1) Signal Amplifier SDL-109A-T1 between each group of 30 fixtures. See Page# 414-419 of this catalog
for more information on the SRC-143 Signal Amplifier.
The maximum distance should not extend 150m between controller and the last lighting fixture
Unit: Lux
Direction: On axis
0.5M
Example 2
(When more than 30 Fixtures from one controller is required and the distance of more than 150 Meters
distance between the controller and last fixture is required)
Add (1) Signal Amplifier SRC-143 for every 4 groups of 30 fixtures (120 Total per SRC-143) Connect the
output of the first SRC-143 to the input of the next SRC-143 to add additional groups.
See Page# P414-419 of this catalog for more information on the SRC-143 Signal Amplifier.
LW-1800x130-REVO-PC-W (White Color)
Candle Power Distribution
Illuminance
Distance(m)
1
Color
10345
White
2
3
4
5
2736.6
1250.4
708.6
447.6
Unit: Lux
Direction: On axis
190
191
LED Wash Series
Electrical Parameters
LED Wash Series
(Power LED)
(Indoor and Outdoor)
(Direct DMX)
LED Vivid and Purity Linear Wash SL II fixtures are exactly like the LED Vivid Wash II with the
exception of the LED type. With the advancement of LED technology Power LED 1W LED’s
and new beam angle lens solutions made it possible to create the LED Vivid and Purity Linear
Wash SL II Series.
LED Vivid Linear and Purity Wash SL II fixtures are energy saving, LED based, multiple pixel
based wash fixture, Incorporating Power LED 1W LEDs depending on model.
The LED Vivid Linear Wash SL II fixtures are RGB full color 16.7M true 24 Bit color changing
Linear Wash Fixtures.
LED Purity Linear Wash SL II fixtures are AWB (Amber White Blue) Color Correlated Temperature
(CCT) linear Color temperature control from 2000, to 10,000K, and single color (A/W/B), and
single color (A/W/B) Amber, White, Blue, “Cool” White with Warm White (WWW), Warm
White (WW), and Ultra Warm White (UWW).
LED Vivid and Purity Linear Wash SL II (RGB, CCT Color Correlated Temperature,) we term as
“controllable” fixtures can be operated standalone, master slave with built in pre-programmed
effects or directly with and standard DMX-512 controller. The LED Vivid and Purity Linear
192
LED Vivid Linear Wash SL II(RGB)
LED Purity Linear Wash SL II
Wash II “controllable” fixtures are engineered with push button waterproof
external LED display based user interface for setting the mode of operation
or DMX Address. The LED Vivid and Purity Linear Wash SL II “controllable”
fixtures use only 3 Channels of DMX to enable external programming of linear
color changing, step based scenes as desired by the lighting designer. You can
also add an easy to use pre-programmed external controller if you are DMX
challenged such as the SRC-WASHER-100A. For more information on controller
functionality refer to the control section of this catalog.
LED Vivid Purity Wash SL II series fixtures have many variants
such as:
Single color versions are On and Off only and are direct to AC intelligent
fixtures.
(WWW) Cool White and Warm White Mix are new versions with linear CCT
control from 2,000K to 10,000K which offers a different theory to CCT than
AWB versions.
(WW) Warm White is populated with only one (K) Kelvin Temperature of
Warm White LEDs for applications that require single color incandescent
energy savings wash effect. (CCT(K) as specified at time of order)
(UWW) Ultra Warm White is populated with Ultra Warm White “true
incandescent” looking LEDs for applications that require single color
incandescent energy savings wash effect.
** Due to typeset limitations the new WWW, WW, UWW, versions
specifications are not included in this catalog. For more information on how
to order these versions see the order code information in this catalog and ask
your Neo-Neon™ Sales Associate for more information.
The LED Vivid and Purity Linear Wash II fixture housings are composed of a
“Slim Line” Aluminum Extruded fixture housing, aluminum machined hardware,
heat treated glass aperture plate. LED Vivid and Purity Linear Wash II fixtures
come in either indoor or outdoor versions.
193
(RGB)
(White)
Specifications
LED Color Range
Light Source
Beam Angle
Light Spacing
Data Interface
Control System
Fixture Housing
Connecting Mode
Connector
Weight
LW-400-REVO-PC-12V
LW-800-REVO-PC-12V
LW-1200-REVO-PC-12V
Item NO.
400
800
1200
Different brightness of red, green & blue LED combined to produce 16,000,000 colors.
High Power LED
25°
20m
Standard DMX compatible
DMX512 console or SRC-WASHER-100-A controller
Die Cast Powder Coated Aluminum
Standard signal cord and power cord
3-pin signal connector
1.25Kg
2.2Kg
3.2Kg
Electrical Specification
Operating Voltage
Operating Current (Max.)
Power Consumption
3.6A
43.2W
5.4A
64.8W
400
800
White
High Power LED
25°
20m
Standard DMX compatible
NA
Die Cast Powder Coated Aluminum
NA
NA
1.25Kg
2.2Kg
1200
400
Blue
800
1200
3.2Kg
1.25Kg
2.2Kg
3.2Kg
Operating Voltage
Operating Current (Max.)
Power Consumption
100-240V AC/24V DC
1.8A
3.6A
18W
35W
5.4A
52W
1.8A
18W
3.6A
35W
5.4A
52W
White 12
White 24
White 36
Environmental Specification
-20°C~40°C
IP68
IP65
Stand Alone Preproglammed Effects
Static Display
Flashing Change
Cross Fade
Chasing Change
Circulation Function
LW-400-REVO-PC-B
LW-800-REVO-PC-B
LW-1200-REVO-PC-B
Electrical Specification
90-264V AC/12V DC
1.8A
21.6W
Environmental Specification
Operating Temperature
IP Rating
LED Color Range
Light Source
Beam Angle
Light Spacing
Data Interface
Control System
Fixture Housing
Connecting Mode
Connector
Weight
LW-400-REVO-PC-W
LW-800-REVO-PC-W
LW-1200-REVO-PC-W
LED Wash Series
Specifications
Item NO.
(Blue)
Operating Temperature
IP Rating
-20°C~40°C
IP65
Source specifications
Static display of 16,000,000 colors by mixing colors
Colors transition from high brightness to low brightness
Colors alternate
Colors chase one another
Single color circulates regularly
Source
White 12
White 24
White 36
Source specifications
Source
Red 4, Green 4, Blue 4
Red 8, Green 8, Blue 8
Red 12, Green 12, Blue 12
Dimensional DIagram
6
194
195
Due to the limitation of the type set, this catalog’s specifications for each fixture may not be shown.
For more information on other models please contact your Neo-Neon™ Sales Associate.
LW-1200-REVO-PC (RGB)
Candle Power Distribution
DMX Function Chart
Mode
DMX Channels
Channel
Name
Value
Function
1 Pixel
3
1
Red
0-255
0-100% Intensity
2
Green
0-255
0-100% Intensity
3
Blue
0-255
0-100% Intensity
Vivid Wash III is available in Black or White Finish Standard.
Custom Finishes upon request (Volume Dependant)
Testing circumstance
Installation Position
Testing Surface
Horizontal
A-A surface
Electrical parameters
0.3 A
220V
65W
Controllers
Testing result
Illuminance Distribution
60.1
70.4
83.4
104.0
117.7 124.3
108.6
90.3
74.9
63.7
76.2
97.5
155.1 248.6
314.0 308.4
240.2
153.3
129.1
77.6
101.9 163.6
320.6 593.5
751.4 684.1
473.8
265.4
149.5
94.4
136.4 269.2
629.9 1047.7 1242.0 1157.9 829.9
475.7
220.6
118.7
156.1 370.1
801.9 1255.1 1619.6 1535.5 1114.0 630.8
281.3
141.1
147.7 329.9
746.7 1205.6 1296.0 1528.9 1129.9 680.4
298.1
142.1
128.9 237.4
529.9 923.4
1203.7 1213.1 943.9
542.9
246.7
120.6
103.7 154.2
291.6 550.5
752.3 761.7
567.3
306.5
144.9
92.5
89.7
112.1
152.3 240.2
317.8 315.9
214.9
135.5
93.5
71.0
72.9
86.9
100.9 116.8
129.9 121.5
101.9
81.3
67.3
57.0
0.5M
Units:
Color:
Direction:
Testing distance:
multipliers:
0M
0.5M
0M
10
16
16
9
4
8
36
88
84
32
6
14
90
704
751
67
10
12
83
485
344
59
10
5
19
48
47
17
6
3
5
8
8
5
3
1M
Units:
Color:
Direction:
Testing distance:
0M
3
4
5
208.4
27.1
85.9
110.3
118.1
15.2
47.9
62.4
74.6
9.3
30.4
40.4
Example 1
Up to 30 units can be connected in this configuration without the need for a signal amplifier. See Example 2
for larger applications and requirements.
For more information regarding DMX Control
and the Order Code Descriptions See Page
P414-419 located at the end of this section.
Example 1-Expanded (When more than 30 Fixtures from one controller is required)
Add (1) Signal Amplifier SDL-109A-T1 between each group of 30 fixtures. See Page# P414-419 of this
catalog for more information on the SRL-143 Signal Amplifier.
The maximum distance should not extend 150m between controller and the last lighting fixture.
Example 2
(When more than 30 Fixtures from one controller is required and the distance of more than 150 Meters
distance between the controller and last fixture is required)
Add (1) Signal Amplifier SRC-143 for every 4 groups of 30 fixtures (120 Total per SRC-143)
Connect the output of the first SRC-143 to the input of the next SRC-143 to add additional groups.
See Page# P414-419 of this catalog for more information on the SRC-143 Signal Amplifier.
Candle Power Distribution
1M
0M
Illuminance
Distance(m)
Color
White
1
2
3
4
5
1454
364
162
91
58
Unit: Lux
Direction: On axis
Light Output
Color
Total Output (lumens)
Power (Watts)
Efficacy (lm/W)
196
2
456.1
57.0
185.9
242.9
LW-400-REVO-PC-W (White Balanced)
1M
Lx
White
On axis
1m
Distance(m)
1
Color
1724.3
White
213.1
Red
700.9
Green
937.4
Blue
DMX 512 or SRC-WASHER-100A
Unit: Lux
Direction: On axis
Lux
White Balanced
On axis
1m
0.115 Red, 0.378 Green, 0.506 Blue
4
DMX-512
SRC-WASHER-100A
1022.806cd
370.7Lm
11.029lm/w
28˚
Controlling standard voltage 220V
Illuminance
0.5M
LW-400-REVO-PC-W (white color)
Max. luminous Intensity
Luminous Flux
Efficiacy
Beam Angle
Remark
Connection Example
White
517.4
29.4
17.6
197
LED Wash Series
Current
Voltage
Power consumption
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising