utility products introduction

utility products introduction

INTRODUCTION

Pelco Products, Inc. is a centrally located, Oklahoma based, family-owned business specializing in designing, engineering, manufacturing and distributing the finest traffic and utility products. Utilizing the latest in technology and streamlined manufacturing, Pelco offers a broad range of utility products ranging from capacitor bank junction boxes to a customized solution, such as our insulator blade adapter.

Equipment Mounts

Various utility equipment mounts are offered by Pelco, including conduit stand-off brackets, cutout arrestor mounts, transformer mounts, and meter mounts.

Arm & Pole Products

Pelco manufactures davit arms, lighting arms, and luminaire clamps, as well as round, tapered, and fluted poles, in multiple sizes. Various hand hole covers, pole caps, and bases are also available.

Capacitor Bank Products

Pelco offers a wide variety of junction box assemblies, weather-resistant and pre-wired. Various configurations are available with 6 or 4-jaw meter bases, transformer cables, sensor cables, and Mil-Spec connectors.

Theft Deterrent Products

“Copper Safe” theft deterrent products are Pelco’s solution to copper theft and vandalism. Pelco’s cable retainers, hand hole covers, and base doors prevent unnecessary expenses to a community.

Foundation Anchors

Pelco’s power-installed foundation anchors provide an economic advantage over traditional methods by reducing labor cost, equipment, material, and time. Various sizes are available.

Lighting Solutions

Pelco offers a variety of lighting fixtures, customized for specific requirements. Pelco can also provide various poles, bases, and anchors for mounting the lighting fixtures.

Special Applications

Pelco Products, Inc. has always strived to provide the industries best source for products that fill special and unique mounting applications. Our design and engineering capabilities have resulted in hundreds of products that, over the years, have solved mounting problems for customers all over the world. If you do not find the product you need in our standard catalog, contact Pelco Products, Inc. We may have an existing product to meet your needs.

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435 i

TABLE OF CONTENTS

PRODUCT INDEX

PART NUMBER SYSTEM

COATINGS

TERMS AND CONDITIONS

SHIPPING NOTICE

WARRANTY

PRODUCT SECTIONS U1 - U6

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435 ii

PRODUCT INDEX

BRACKETS & EQUIPMENT MOUNTS ...................................

Stand-off Brackets, H-Bars & Conduit Straps,

Utility Mounting Brackets, Cutout Arrester Mounts,

Transformer Mounts, Meter Mounts, Blade Adapter,

Banding Components, Banding Brackets

U 1

ARM & POLE PRODUCTS ....................................................

Davit Arms, Luminaire Arm Clamps, Pole Caps,

Hand Hole Covers, Typical Pole & Base

U2

CAPACITOR BANK PRODUCTS .........................................

Junction Boxes, Meter Bases, Cable Assemblies,

Wiring Harness

U3

THEFT DETERRENT PRODUCTS ...........................................

Cable Retainers, Base Doors, Hand Hold Covers

U 4

BASES & FOUNDATION ANCHORS ....................................

Foundation Anchors, Anchor Bolt Cages, Anchor Bolt Sets,

Transformer Bases, Plastic Replacement Doors,

Conduit Topper, Anchor Bolt Template

U 5

LIGHTING SOLUTIONS ......................................................

Luminaires, Light Shields, Lighting Arms, Poles, Bases,

Banner Bracs, Flag Mounts

U 6

1/4/16

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435 iii

PART NUMBERING SYSTEM

Following is a typical example of how to construct a unique part number for ordering. Options such as length, coating, etc., should be indicated by filling in the blank boxes with specific information as shown below. All part numbers should consist of the base part number and at least a finish or coating suffix.

Example:

H-Bar

Length

Conduit Stand-Off Bracket w/ 6” Stand-Off & H-Bar, Alum

H-Bar

Length

06=6”

09.5=9-1/2”

12=12”

24=24”

Coating

PNC

PNC=Process No Color

P_ _=Paint

Part Number

SP-6060-12-PNC

H-Bar Length

Coating

Conduit Stand-Off Bracket w/ 6” Stand-Off & 12” H-Bar, Alum

• Pelco’s standard utility products with typical options are shown in this catalog.

Special options are often available upon request.

• State Specials are not included in this catalog.

• All information is assumed to be correct at the time of printing.

For the most up-to-date information, please check Pelco’s online catalog at www.pelcoinc.com

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435 iv

COATINGS

POWDER COAT

STANDARD COLORS

P30 Automatic Green

P33 Gloss Black

P34 Flat Black

P36 New York State Green (forest)

P38 Louisiana Green

P39 Bronze

P59 Textured Black

P67 Ansi Gray

WET PAINT

STANDARD COLORS

P04 Gloss Black

P05 New York State Green (forest)

P06 Automatic Green (dark green)

P22 Gloss White (industrial enamal)

P17 Platinum

CODE COATING

PNC

BOX

BRS

Process No Color

Black Oxide

Brass

CRM Chrome

EC1 E-coat Black

GLV

ZN1

ZN2

P_ _

Galvanized

Zinc Bright

Zinc Yellow

Paint

(add color #)

POWDER COAT

SPECIAL COLORS

(SUBJECT TO SPECIAL SETUP CHARGE)

P35 Iron Gray

P37 Epoxy Matte Gray Primer

P40 Silver (w/ clear top coat)

P45 Super Wet White

P48 Gray Primer (zinc rich)

P62 MDC Gray

P64 KOMO Bronze

Note:

Pelco can match your custom colors.

Please provide the following and contact Pelco for pricing.

• For custom powder: RAL number or paint chip.

• For wet paint: Federal Standard 595 paint code or paint chip.

Special setup and paint charge will apply.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

v

TERMS & CONDITIONS

PAYMENT TERMS

Net 30 Days.

A 1

1

/

2

% per month (18% APR Service Charge) will be assessed on invoices whose payment has not been received within 45 days.

CREDIT CARD TERMS

We accept American Express, Mastercard, Visa, and Discover. A service fee of 3% will be added to all invoices. Credit Card will be charged prior to shipment.

CREDIT HOLD

Accounts over 90 Days will be placed on credit hold and remain so until brought current including

Service Charges. Orders on credit hold will be pulled from production and will only be rescheduled for shipment after release from credit hold.

MINIMUM BILLING

A $20.00 Minimum Service Charge will be assessed to each order for $50.00 or less.

F.O.B. POINT

Edmond, Oklahoma unless otherwise quoted.

PRICING

As stated in Price Schedule,

prices are subject to change without notice.

QUOTATIONS

Pricing on quotations is firm for 30 days from date of quotation unless otherwise indicated. Please reference quotation when ordering.

CANCELLATIONS

Orders cancelled for stock items will be assessed at a minimum of 10% of net value.

Orders cancelled for special or non-stock items will be assessed at a minimum of 20% of net value.

CUSTOMER PICK UP

Customer pick up requests will be accommodated. A 10% service charge will apply if not picked up within

30 days of notification of completion of order .

SHIPMENT & DELIVERY

Pelco is very diligent in selecting the most competent and economical carrier. However, upon written request Pelco will use a carrier of your specific choice. See Shipping Notice, in the Reference Section of this catalog, for shipment specifics and freight claims.

RETURNED GOODS

In order to expedite handling, written authorization must accompany all returned goods. Upon request, a Returned Merchandise Authorization (RMA) will be issued and must be used. Use this RMA as a packing list when returning a shipment. A restocking fee plus freight charges shall be assessed against the return of goods unless return of goods was due to an error of Pelco.

REQUESTS FOR CERTIFICATIONS

Representative material test reports are available on request for most Pelco products. If your order contains materials that require lot or heat treat number traceability, or if the materials must be of domestic origin, those requirements must be clearly stated at the time your order is placed.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

1/4/16

vi

SHIPPING NOTICE

COPY OF SHIPMENT NOTICE INCLUDED WITH EACH SHIPMENT

NOTICE

SHIPMENTS MADE WITH FACTORY AS F.O.B. POINT

-CARRIER HAS ACCEPTED SHIPMENT IN GOOD CONDITION-

LOST OR DAMAGED GOODS ARE THE CARRIER’S RESPONSIBILITY in all shipments of this type.

PELCO’S Responsibility For This Shipment Has Now Ceased.

CHECK YOUR SHIPMENT CAREFULLY WHEN DELIVERED to see that it is in good order and received complete. When packages check short or are in bad condition, have the Carrier’s agent make notation of this fact in detail on the freight bill or express receipt and then require that he sign it.

LOST OR DAMAGED GOODS ARE THE CARRIER’S RESPONSIBILITY in all LTL (less than truckload) shipments. In TL (truckload) shipments, the Carrier is responsible for damage to exposed surfaces of the goods (top and ends) caused by collision with other vehicles or objects when the Carrier is negligent, and by loading other freight on or against Pelco goods. When the trailer itself shows evidence of fresh damage, call at once for inspection of the contents just as though it were an LTL shipment.

CONCEALED LOSS OR DAMAGE DISCOVERED AFTER DELIVERY of shipment must be reported to the delivering Carrier upon discovery, and in any event within 15 days after receipt. Hold goods, containers, and packing materials in exact condition as found for inspection by the Carrier. An inspector for the Carrier should call within 48 hours. If nothing is heard in that time, notify them by registered mail and get a receipt. The Carrier will issue an inspection report and give you a copy which must be used to support your claim.

FAILURE TO COMPLY WITH ANY OF THE FOREGOING REGULATIONS IS REGARDED AS INDICATING COMPLETE DELIVERY

OF FREIGHT IN GOOD CONDITION.

Make Your Claim Promptly

Carrier Will Not Consider a Claim Unless Presented Within 9 Months After Receipt of Shipment.

IMPORTANT!

DO NOT DEDUCT THE AMOUNT OF LOSS OR DAMAGE from Pelco invoice while awaiting adjustment of a claim, as we can not guarantee safe delivery for actions beyond our control.

Please do not return goods to Pelco or instruct Carriers to return goods without first securing written authorization and shipping instructions.

SHIPMENTS MADE WITH DESTINATION AS F.O.B. POINT

-CARRIER HAS ACCEPTED SHIPMENT IN GOOD CONDITION-

CHECK YOUR SHIPMENT CAREFULLY WHEN DELIVERED to see that it is in good order and received complete.

When packages check short or are in damaged condition, have the carriers agent make notation of this fact on the freight bill or express receipt, and then require that he sign it.

Check your shipment immediately to make sure the contents agree with the Pelco packing list enclosed and to determine if any damage has occurred during transit.

Any shortages and or concealed damages MUST be reported to Pelco within 10 DAYS.

FAILURE TO COMPLY WITH THE FOREGOING IS REGARDED AS AN INDICATION THAT YOUR SHIPMENT HAS ARRIVED IN

SATISFACTORY CONDITION AND THAT IT IS COMPLETE AS SHOWN ON OUR PACKING LIST.

Please do not return damaged goods to Pelco without first securing authorization and shipping instructions.

Pelco will make every effort possible to effect prompt correction of any short or damaged goods when claims are made within these guidelines.

320 W. 18th

Edmond, OK 73013

(405)340-3434 FAX:(405)340-3435

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

1/4/15

vii

WARRANTY

WARRANTY

General:

All statements, technical information and recommendations contained in Pelco Product

Brochures and Bulletins are based on tests Pelco believes to be reliable. However, the accuracy or completeness thereof is not guaranteed and the following is made in lieu of all warranties, expressed or implied:

Limited Warranty:

Pelco’s only obligations shall be to replace such quantity of the product proven to be defective.

Repair or replacement of any product will be made at Pelco’s facilities. The extent of repair or replacement is at Pelco’s discretion. Transportation to and from Pelco’s facilities is the responsibility of the buyer.

Pelco shall not be liable for injury, loss or damage direct or consequential arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for his intended use, and assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any effect unless in an agreement signed by the officers of Pelco Products Inc.

Warranty Period:

Unless otherwise noted, standard product warranty is 12 months from date of shipment.

LED LUMINAIRE WARRANTY

Limited Warranty:

LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are covered by a 5 year limited warranty. Pelco does not warrant the surge protection device, which is covered by the applicable warranty (if any) of the company that manufactures it. Surge protection devices have a defined useful life that is predicated upon the number of surge events and their magnitude, all of which is application and site specific. When the useful life of the surge device is reached, the device no longer provides surge protection to the downstream electronics. It is the end user’s responsibility to provide periodic maintenance/ replacement of all surge protection devices. Pelco’s limited warranty does not provide coverage for product damage resulting from the end user’s failure to replace surge protection devices before they have reached their useful life.

Contact Pelco for complete warranty details and exclusions.

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435 viii

Secondary Stand-Off Brackets

Stand-off Bracket, 18”

Galvanized Steel

For Triple Conduit Mount

SP-6275-GLV

17”

Side View

14.5”

Triple mount conduit holder for wood pole. Supplied with three U-Channel brackets. Galvanized steel.

Stand-off Bracket, ADA

Galvanized Steel

SP-6276-GLV

SP-6275-GLV

14.5”

SP-6276-GLV

17”

Side View

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123.

2. All assemblies are supplied standard with galvanized fasteners.

Used when a 4th conduit holder is required, by adding to the bottom of the SP-6275 Stand-off Bracket. Supplied with one U-Channel bracket. Galvanized steel.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-1

Secondary Stand-Off Brackets

Stand-off Bracket, NE

Galvanized Steel

For Single Conduit Mount

SP-6277-GLV

17”

Side View

Single mount conduit holder for wood pole. Supplied with one U-Channel bracket. Galvanized steel.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123.

2. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-2

1/4/16

Conduit Stand-Off Brackets

Shown with a preformed conduit strap.

4.5”-6”

Side View

H-Bar

Top View

Conduit Stand-Off Bracket, w/ Adjustable Stand-0ff & H-Bar, Alum

H-Bar

Length

SP-6042 - - PNC

Blank=None

06=6”

09.5=9-1/2”

12=12”

18=18”

24=24”

36=36”

This bracket is for mounting 1” through 6” conduit and can adjust from a 4½” to 6” stand-off. Available with various H-bar lengths which capture ½” bolt heads. Mounts to the pole with

5/8” thru-bolt or 1/2” lag screw. (not supplied).

Shown with a preformed conduit strap.

4.5”-6”

Conduit Stand-Off Bracket w/ Adjustable Stand-0ff & H-Bar, Alum for Wood, Steel, or Concrete Poles

SP-6045

Band Retainer

H-Bar

Length

SP-6046 - - PNC

Blank=None

06=6”

09.5=9-1/2”

12=12”

18=18”

24=24”

36=36”

Side View

H-Bar

Top View

For mounting 1” through 6” conduit and can adjust from a

4-1/2” to 6” stand-off. Available with various H-Bar lengths which capture 1/2” bolt heads. Mounts to the pole with 5/8” thru-bolt, 1/2” lag screw, or banding material

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See page U1-5 for Preformed Conduit Straps.

(not supplied).

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-3

This page is intentionally left blank.

Page U1-3a www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

1/4/16

Shown with a preformed conduit strap.

6”

Side View

H-Bar

Top View

Conduit Stand-Off Brackets

Conduit Stand-Off Bracket w/ 6” Stand-0ff & H-Bar, Alum for Wood, Steel, or Concrete poles

H-Bar

Length

SP-6060 - - PNC

Blank=None

06=6”

09.5=9-1/2”

12=12”

18=18”

24=24”

36=36”

A multi-purpose bracket with a 6” stand-off for mounting 1” through 6” conduit. Available with various standard H-bar lengths which capture ½” bolt heads. Mounts to the pole with

5/8” thru-bolt, 1/2” lag screw, or 1½” banding material (not supplied).

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See page U1-5 for Preformed Conduit Straps.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

1/4/16

Page U1-3b

Conduit Stand-Off Bracket, Galvanized for Wood Poles, 1-1/4” x 1/8” Steel

Conduit

Size

SP-6273 - - GLV

02=2”

03=3”

04=4”

05=5”

06=6”

For mounting 2” through 6” conduit. Bracket has 9/16” diameter holes for mounting to pole.

Conduit Stand-Off Bracket, Galvanized

2” Channel x 6” stand-off, Steel

SP-6347-GLV

6”

10”

2” galvanized steel channel with a 6” stand-off for mounting conduit. Bracket has two 9/16” diameter holes for mounting to pole.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

2. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-4

8/18/15

Conduit Stand-Off Brackets

Conduit Stand-Off Bracket, Galvanized for Wood Poles, 1-1/2” x 1/8” Steel

SP-6176-GLV

R5”

3-3/4”

Two-piece galvanized steel bracket for mounting 1-1/4” conduit on Class 1 through Class 6 wood distribution poles. Provided with 1/2”-13NC hex hd bolt and hardware. Bracket has 5/8” diameter holes for mounting to pole.

Conduit Stand-Off Bracket, for Wood Poles, 2” x 1/4” Alum

SP-6345-PNC

3-3/4”

Two-piece aluminum bracket for mounting 1-1/4” conduit on

Class 1 through Class 6 wood distribution poles. Provided with 1/2”-13NC carriage bolt and hardware. Bracket has 5/8” diameter holes for mounting to pole.

8/18/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-4a

This page is intentionally left blank.

Page U1-4b www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/18/15

H-Bars & Conduit Straps

2-Way Standard H-Bar, Alum

Captures 1/2” Bolt Heads

H-Bar

Length

SP-6025 - - PNC

06=6”

09.5=9-1/2”

12=12”

18=18”

24=24”

30=30”

36=36”

48=48”

60=60”

SP-6025

Standard H-Bar

SP-6048

Offset H-Bar

2-Way Offset H-Bar, Alum

Captures 1/2” & 5/8” Bolt Heads

H-Bar

Length

SP-6048 - - PNC

Extruded aluminum H-bars can be used for a variety of mounting applications and can be ordered in various standard lengths. The standard 2-way H-bar is designed to capture 1/2” bolt heads. The offset 2-way H-bar is designed to capture 1/2” and 5/8” bolt heads.

06=6”

09.5=9-1/2”

12=12”

18=18”

24=24”

30=30”

36=36”

48=48”

60=60”

Preformed Conduit Strap, Alum

0.09” x 1-1/2” Alum w/ 1-1/4” Long Bolts

Conduit

Size

SP-6027 - - PNC

1=1”

1.5=1-1/2”

2=2”

2.5=2-1/2”

3=3”

4=4”

5=5”

6=6”

Conduit

Diameter

Preformed Conduit Strap, Alum

0.09” x 1-1/2” Alum w/ 2” Long Bolts

Conduit

Size

SP-6049 - - PNC

Preformed 0.09” x 1-1/2” straps available for 1” through 6” conduit. Each strap comes complete with (2) each galvanized hex head bolts, split lock washers, and hex nuts. Available with 1-1/4” or 2” long bolts.

1=1”

1.5=1-1/2”

2=2”

2.5=2-1/2”

3=3”

4=4”

5=5”

6=6”

Note: 1. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/18/15

Page U1-5

Utility Mounting Brackets

Switch Mounting Bracket,

Galvanized

4-1/2” x 1/4” Steel for Wood Poles

SP-6019-GLV

23-3/4”

Mtg Holes

15° Adjustments

(top & bottom)

Top View Side View

Bottom View

Three-piece galvanized steel mounting bracket.

Designed to mount fuse and disconnect switches to a wood pole. Four adjustments on top and bottom in 15° increments.

Meter Mounting Bracket,

Galvanized for Wood Poles

3/16” Steel w/ 5/16” Slots

SP-6029-GLV

1.5”

12.75”

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

2. All assemblies are supplied standard with galvanized fasteners.

Steel bracket for mounting meter base on wood pole.

Galvanized after fabrication.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-6

4/7/15

12.83”

Utility Mounting Brackets

Wire Protector Bracket,

Galvanized

1.67” x 1.65” x 1/4” Steel for Wood Poles

SP-6279-GLV

15.88”

Protects the wire by running it inside the channel so it is not visible, acting as a theft deterrent.

Meter Loop Cabinet Bracket,

Galvanized for Wood Poles

1/8” Steel w/ 17/32” Slots

SP-6175-GLV

R5”

3-3/4”

16”

Top View

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

2. All assemblies are supplied standard with galvanized fasteners.

Two-piece galvanized steel mounting bracket. Designed to mount cabinet to Class 1 through Class 6 wood distribution poles. 5/8” diameter holes for mounting to pole.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-7

Utility Mounting Brackets

Wall Bracket, Horizontal Support,

Galvanized Steel f or Transformer Vault

2” x 2” x 1/4” Angle w/ (4) 9/16” & (2) 11/16” Holes

SP-6253-GLV

14”

12”

Used as a horizontal support in transformer vaults.

Galvanized after fabrication.

Cutout Mounting Bracket,

Galvanized Steel

1-1/2” x 3/8” w/ (2) 11/16” Holes

SP-6004-GLV

6”

10.25”

Attaches to the A26 vertical support brace to provide a point of attachment for cutouts on a 17’

2 pole platform bank. Three brackets required per station. Galvanized after fabrication.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-8

4/7/15

Mounting Bracket, Steel for Group Operated Switch

7” Channel x 16” w/ (4) 11/16” Holes

SP-6132-GLV

Group operated switch mounting.

Galvanized after fabrication.

Guard, Anti-Climbing,

Galvanized Steel

1-15/16” x 48” x 10 Ga Steel

SP-6274-GLV

Works in conjunction with the conduit Stand-off

Brackets to prevent individuals from climbing poles.

Galvanized after fabrication.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-9

33.88”

Angle Brace, Galv Steel for Wood Crossarm

1-1/2” x 1-1/2” x 1/4” w/ 9/16” & 11/16” Hole

SP-6260-GLV

4”

Angle brace for wood crossarm.

Galvanized after fabrication.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-10

1/4/16

Relay Mounting Panel, Galv Steel

2-3/4” x 5-1/2” x 12 Ga Steel w/ (4) 6-32NC, (2)10-32NC & (2) 1/4” Holes

SP-6278-GLV

Mounting Angle, Galv Steel

1” x 2” x 4-1/4”

SP-6280-GLV

Adapter Clip, Galv Steel

1/2” x 1-3/8” w/ 3/16” Holes

SP-6281-GLV

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-11

Cutout Arrestor Mounts

Bolted Equipment Mount, Alum

Single-Phase, Single Mount

Insulator

Pad

SP-6057 - - PNC

BP=Bent

SP=Straight

Shown with terminator.

9”

Side View

5-5/8”

Top View

Bent Insulator Pad Straight Insulator Pad

For mounting single cutouts, lightning arresters, or potheads.

Mounts to pole with 5/8” thru-bolt and 1/2” lag screw

(not supplied)

. Two units may be mounted back-to-back on pole using same thru-bolt.

Bolted Equipment Mount, Alum

Single-Phase, 2-piece Mount

SP-6088-PNC

9”

Side View

11”

Top View

For mounting two pieces of equipment. Mounts to pole with 5/8” thru-bolt, 1/2” lag screw or 1-1/2” banding material

(not supplied)

.

Two units may be mounted back-to-back on pole using same thru-bolt.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See pages U1-21 through U1-23 for banding material.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-12

4/7/15

Brackets & Banding

Cutout Arrestor Mounts

Bolted Equipment Mount, Alum

Three-Phase, 3-piece Mount

Length

SP-6064 - - PNC

23=23-1/4”

33=33-1/2”

11”

Length

Top View

For mounting 3 pieces of equipment: potheads, arrestors, and cable terminators. Supplied with grounding lug, galvanized bolts, lock washers and nuts. Mounts to pole with 5/8” thru-bolt, 1/2” lag screw or 1/2” banding material

(not supplied)

.

Bolted Equipment Mount, Alum

Three-Phase, 6-piece Mount

Length

SP-6065 - - PNC

24=24-3/4”

35=35”

11”

Length

Top View

For mounting 6 pieces of equipment: potheads, arresters, and cable terminators. Supplied with grounding lug, galvanized bolts, lock washers, and nuts. Mounts to pole with 5/8” thru-bolt, 1/2” lag screw or 1/2” banding material

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See pages U1-21 through U1-23 for banding material.

(not supplied)

.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-13

Cutout Arrestor Mounts

Arrester Mount Bracket, Alum

Three-Phase, Load Side

SP-6324-PNC

Three phase load side arrester frame for mounting reclosures.

Arrester Mount Bracket, Alum

Three-Phase, Line Side

SP-6325-PNC

Three phase line side arrester frame for mounting reclosures.

Note: 1. Arrester mount brackets are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-14

4/7/15

Brackets & Banding Cutout Arrestor Mounts

18”

17”

Bolted Equipment Mount, Alum

Single-Phase

SP-6092-PNC

10”

Top View

For mounting individual cutouts and arrestors at a distance of 17” from the pole. A 5/8” thru-bolt (not supplied) is recommended for installation. Two units may be mounted back-to-back on the pole using the same thru-bolt.

Arrestor Mounting Bracket, Steel

1-1/4” x 12-1/4” w/ 1/2”-13NC Hardware

2-3/8”

SP-6346-GLV

12.25”

For mounting individual arrestors at a distance of 2-3/8” from the pole. Two 9/16” slots are for adjustable mounting to the pole. Supplied with 1/2”-13NC hardware.

Cross Arm Bracket, Steel w/ Galvanized Hardware

SP-6354-GLV

0”-4”

12.25”

2.56”

The 90° L-shaped bracket is 3/8” x 1-1/4” galvanized steel which can be adjusted from 0”-4” from the 1/4” thick mounting bar using the 3/8”-16NC tap bolts.

Supplied with 1/2”-13NC x 2” carriage bolt, flatwasher, lock washer, and nut.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-15

Transformer Mounts Brackets & Banding

Transformer Mounting Bracket

Alum

SP-6157-PNC

24” CTC

12” CTC

For mounting one 3KVA thru 100KVA transformer, having 12” or 24” EEI-NEMA type A or B lugs. Mounts to pole with 5/8” thru-bolts, 1/2” lag screw, or three

1-1/2” bands (not supplied).

Mounting Bracket, Alum

Current or Voltage Transformers

3-1/4”

14-7/8”

22-3/8”

29-7/8”

37-3/8”

44-7/8”

Current or

Voltage

Transformers

SP-6283 - - PNC

1=for 1 CT or VT

2=for 2 CT or VT

3=for 3 CT or VT

4=for 4 CT or VT

5=for 5 CT or VT

For mounting one through five current or voltage transformers. 1/4” x 3” bracket with 3-1/4” offset and

9/16” keyhole mounting slots on each end.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See pages U1-21 through U1-23 for banding material.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-16

4/7/15

Antenna Mounts

Antenna Mount Assy, Alum

Serrated Articulating Elbow

& Tube Saddle

Tube Length

SP-6338 - - PNC

12=12” Tube

Adjustable assembly with a 1-7/8” OD gusseted tube for mounting antennas. Articulating elbow and saddle have serrated teeth that provide for locking the tube position after adjustment. 3/8”-16NC hardware provided for mounting the hub plate.

8/18/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-17

Meter Mount

Meter Base Frame

Aluminum

30” x 84”

Coating

SP-6357-PNC

PNC=Process No Color

P_ _ =Paint

Fabricated from 1-1/2” sch 80 aluminum pipe and 2” angle. Complete with mounting holes and 1/2”-13 tapped hole for grounding lug. Typically processed with no color, but powder coating is available.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-18

1/4/16

Blade Adapter

Blade Adapter, 2-Hole

Stainless Steel for Line Post Insulators

SP-6221-SS

Features:

• Easy to install, no special tools needed

• Stronger, more secure power line mounting

• Avoid costly line drops and post insulator replacement

• Resistant to damage from wear, corrosion and vandalism

The Insulator Blade Adapter is durable and easy to install. Instead of replacing the entire insulator, simply clamp the stainless steel

Adapter over the damaged aluminum blade. The Blade Adapter is secured by stainless steel bolts, belleville washers, and jam nuts for a solid mounting system. The entire process takes less than five minutes, and can be done by one person.

Strut

Blade Adapter

Line Post Insulator

Side View

Note: 1.All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-19

Banding Components

Retainer Kit, EZ-Band

Alum w/ Galv Hardware

Standard Duty for 3/4” Band

Shown with band (sold separately).

US-8500-

Coating

PNC=Process No Color

P_ _=Paint

Extruded aluminum fittings with galvanized hardware.

To be used with 3/4” banding for mounting brackets to poles. Included 3/4”-16 x 6” galvanized carriage bolt, flat washer and square nut.

Retainer Kit, EZ-Band

Alum w/ Galv Hardware

Heavy Duty for 1-1/4” Band

Shown with band (sold separately).

US-8504-

Coating

PNC=Process No Color

P_ _=Paint

Extruded aluminum fittings with galvanized hardware.

To be used with 1-1/4” banding for mounting brackets to poles. Included 5/8”-11 x 8” galvanized carriage bolt, flat washer and square nut.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See pages U1-21 through U1-23 for banding material.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-20

12/21/16

Banding Components

Catalog

Number

Width

Inches mm

Thickness

Inches mm

Weight

Lbs Kg

TYPE 201 STAINLESS STEEL BAND

-

100 Ft. Per Roll

US-8122-04

US-8122-05

US-8122-06

1/2 12.70

5/8 15.88

3/4 19.05

0.030 0.76

0.030 0.76

0.030 0.76

5.1 2.4

6.4 3.0

7.7 3.6

TYPE 316 STAINLESS STEEL BAND

-

100 Ft. Per Roll

US-8124-04

US-8124-05

US-8124-06

1/2 12.70

5/8 15.88

3/4 19.05

0.030 0.76

0.030 0.76

0.030 0.76

5.1 2.4

6.4 3.0

7.7 3.6

HEAVY DUTY (HD) BANDING

Heavy Duty Band is available in type 201. HD Band is designed for heavy duty applications and 1-1/4”, 201 stainless steel band has a breaking strength of approximately 5500 lbs.

We recommend double wrapping for maximum strength.

Catalog

Number

Width

Inches mm

Thickness

Inches mm

Weight

Lbs Kg

TYPE 201 HEAVY DUTY STAINLESS STEEL BAND

-

100 Ft. Per Roll

US-8124-30

US-8124-31

US-8124-32

3/4

1

19.05

25.40

1-1/4 31.75

0.044 1.12

0.044 1.12

0.044 1.12

11.6 5.4

13.7 6.4

17.2 8.0

BAND-STRAP .024” (.061mm) THICK

-

200 - 300 Stainless Steel

Catalog

Number

Width

Inches mm

Weight

Lbs Kg

Package

Quantity

US-8121-34

US-8121-35

US-8121-36

US-8121-28

US-8121-29

US-8121-30

1/2 12.70

5/8 15.88

3/4 19.05

1/2 12.70

5/8 15.88

3/4 19.05

4.08 1.85

5.09 2.31

6.11 2.77

8.15 3.70

10.19 4.62

12.23 5.54

100 Ft. Roll

100 Ft. Roll

100 Ft. Roll

200 Ft. Roll

200 Ft. Roll

200 Ft. Roll

BAND TOOL

The USA BAND TOOL is a forged double-plated tool capable of tensioning over 2400 lbs.

The banding tool has a built-in cutter and a spring loaded gripper lever. The spin handle has a large retaining ring to keep the handle in place and can be used to hang on a tool belt.

Catalog

Number

Description

US-8120-01

US-8120-43

The USA Band Tool, Wt. 4.4 lbs (2.0 kg) - Package Quantity 1

Close Quarter Tension Nut. Replaces tool tension handle when space is limited. Pacakge Quantity 1

Tension Screw/Handle kit - Package Quantity 1

US-8120-06

HEAVY DUTY BAND TOOL

The Heavy Duty TOOL must be used with all Heavy Duty Bands.

The HD TOOL is 16-1/2 inches long and is capable of up to 6,000 lbs. of tensioning.

Catalog

Number Description

US-8121-10

The Heavy Duty Tool, Wt 11.7 lbs (5.3 Kg) - Package Quantity 1

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-21

Banding Buckles

BUCKLES

Catalog

Number

Width

Inches mm

Weight

Lbs Kg

TYPE 201 STAINLESS STEEL BUCKLES

-

Package Quantity 100

US-8122-54

US-8122-55

US-8122-56

1/2 12.70

5/8 15.88

3/4 19.05

2.1 1.0

2.4 1.1

3.7 1.7

TYPE 316 STAINLESS STEEL BUCKLES

-

Package Quantity 100

US-8124-54

US-8124-55

US-8124-56

1/2 12.70

5/8 15.88

3/4 19.05

2.1 1.0

2.4 1.1

3.7 1.7

GALVANIZED CARBON STEEL BUCKLES

-

Package Quantity 100

US-8123-54

US-8123-55

US-8123-56

1/2 12.70

5/8 15.88

3/4 19.05

2.1 1.1

2.4 1.1

3.7 1.7

HEAVY DUTY BUCKLES

HD Buckles are offered in widths and metals to correspond to HD Band.

Clamps may be double wrapped for extra strength.

Catalog

Number

Width

Inches mm

Weight

Lbs Kg

TYPE 201/301 STAINLESS STEEL

- Package Quantity 25

US-8124-40

US-8124-41

US-8124-42

3/4

1

19.05

25.40

1-1/4 31.75

1.8 0.8

2.4 1.1

3.2 1.4

BAND CLIPS

Catalog

Number

Width

Inches mm

Weight

Lbs Kg

TYPE 201 STAINLESS STEEL BAND CLIPS

-

Package Quantity 100

US-8121-54

US-8121-55

US-8121-56

1/2

5/8

3/4

12.70

15.88

19.05

2.1 1.0

2.4 1.1

3.7 1.7

A-SCREW LOCK BUCKLES

- Stainless Steel

Catalog

Number

Width

Inches mm

Weight

Lbs Kg

US-8127-24

US-8127-25

US-8127-26

1/2 12.70

5/8 15.88

3/4 19.05

2.1 1.0

2.4 1.1

3.7 1.7

Package

Quantity

25

25

25

Width

Inches

1/2

5/8

Thick

201

Force

316

Force

0.030

0.030

1500

1875

1200

1500

Thick Force

0.015

0.015

600

750

Thick Force

0.020

-

850

-

Thick Force

0.025

-

1050

-

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-22

4/7/15

Banding Brackets

SIGN MOUNTING BRACKETS

Catalog

Number Discription

Weight

Lbs Kg

1-BOLT STRAIGHT LEG BRACKET (.075” THICK)

-

Package Quantity 50

US-8121-00

US-8120-04

Stainless Steel with SS Bolt, Washer and Fiber Washer

Stainless Steel without Bolt or Washer

Zinc Plated Steel with Carbon Bolt,

7.3 3.3

US-8120-11

7.6 3.5

Washer and Fiber Washer

1-BOLT FLARED LEG BRACKET (.075” THICK)

-

Package Quantity 50

US-8120-21

US-8120-31

Stainless Steel with SS Bolt and Washer

Zinc Plated Steel with Carbon Bolt,

Washer and Fiber Washer

7.6 3.5

7.4 3.4

BOLTS, WASHERS for BRACKETS

-

50 Per Box

Catalog

Number Description

US-8120-02

US-8121-80

US-8120-03

Bolts Stainless Steel for Stainless

Brackets (5/16 - 18 x 3/4” Long Hex Head)

Bolts Zinc Plated Steel for Carbon

Steel Brackets (5/16 - 18 x 3/4” Long Hex Head)

Fiber Washers

MOUNTING PLATES

-

Per Each - Secure with band and buckles.

Strapping holds this extruded aluminum mounting plate to utility poles.

Catalog

Number Description

Weight

Lbs/Ea

US-8125-10

US-8125-12

US-8125-11

US-8125-13

Light Duty, 1-1/2” x 4-3/4” w/ 5/8”-11 x 2” Plated Bolt

Heavy Duty, 1-1/2” x 5-1/4” w/ 5/8”-11 x 2” Plated Bolt

Heavy Duty, 1-1/2” x 5-1/4” w/ 5/8”-11 x 3” Plated Bolt

Heavy Duty, 1-1/2” x 5-1/4” w/ 3/4”-11 x 3” Plated Bolt

0.57

0.78

0.84

1.22

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-23

Davit Arms

Davit Arm

Galvanized Steel

For Steel and Wood Poles

Length

SP-6312 - - GLV

78=6-1/2’

90=7-1/2’

78”

14”-17” Rise

90”

17”-21” Rise

The phase attachment on the heavy duty davit arms have

1-1/2” holes with a tear-out capacity of 40,000 lbs. The mounting plate has three 1-1/8” holes and one 1-1/8” x

1-1/2” slot that will allow mounting to steel or wood poles.

Available in 6’-6” and 7’-6” lengths. All critical welds per

ASTM E709 in conjunction with ANSI/AWS D1.1.

Note: 1. Davit Arms are hot dip galvanized per ASTM A-123.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U2-1

A

A

A

A

A

A

Luminaire Arm Clamps

Luminaire Mast Arm Clamp, Single

2-Piece Adjustable w/ Simplex Fitting,

Galvanized Steel

AP-1009-GLV for 4” to 5” Dia Pole

AP-1028-GLV for 5.5” to 7.5” Dia Pole

AP-1011-GLV for 8” to 10” Dia Pole

Clamp

Section

Single Clamp with simplex fitting for mounting luminaire arms to steel or wood poles. Available in 3 sizes. Supplied with galvanized hardware.

Luminaire Mast Arm Clamp, Set of 2

2-Piece Adjustable w/ Simplex Fitting,

Galvanized Steel

AP-1014-GLV for 4” to 5” Dia Pole

AP-1030-GLV for 5.5” to 7.5” Dia Pole

AP-1023-GLV for 8” to 10” Dia Pole

Upper

Section

Dual Clamp with simplex fitting for mounting luminaire arms to steel or wood poles. Available in 3 sizes. Supplied with galvanized hardware.

Lower

Section

Note: 1. Luminaire Clamps are hot dip galvanized per ASTM A-123.

2. All assemblies are supplied with Galvanized Hardware.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U2-2

4/7/15

A

A

A

A

A

A

Luminaire Arm Clamps

Luminaire Mast Arm Clamp, Single

3-Piece Adjustable, Steel

AP-1008-GLV for 8.9” to 12” Dia Pole

Clamp

Section

Single Clamp with simplex fitting for mounting luminaire arms to steel or wood poles. Supplied with galvanized hardware.

Luminaire Mast Arm Clamp, Set of 2

3-Piece Adjustable, Steel

AP-1032-GLV for 8.9” to 12” Dia Pole

Upper

Section

Lower

Section

Note: 1. Luminaire Clamps are hot dip galvanized per ASTM A-123.

2. All assemblies are supplied with Galvanized Hardware.

Dual Clamp with simplex fitting for mounting luminaire arms to steel or wood poles. Supplied with galvanized hardware.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U2-3

Pole Caps

Pole Cap Assembly

ABS Plastic

AP-0805-

Coating fits up to 4” Dia Pole

AP-0806- fits up to 5” Dia Pole

PNC=Process No Color

P_ _=Paint

Fabricated from UV inhibited black ABS Plastic, but also available wet painted. Two sizes to chose from. Assembled complete with three square head set screws.

Cover, Simplex Fitting, 2-Bolt

ABS Plastic

AP-1047-

Coating

PNC=Process No Color

P_ _=Paint

Fabricated from UV inhibited black ABS, but also available wet painted. Attaches to 2-bolt simplex fittings to prevent birds from nesting in the pole. Assembled complete with two black nylon bolts.

Note: 1. Pole Cap assemblies are supplied standard with stainkess steel fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U2-4

4/7/15

Hand Hole Covers

Hand Hole Cover Assy, Universal

ABS Plastic

Fits 2-3/4” x 4-1/2” to 5” x 8” Hand Hole

PB-5356-PNC

Pelco’s Universal Hand Hole Cover is fabricated from durable UV inhibited copolymer with gray acrylic ultraviolet protector. Impact resistant, withstands temperature extremes of -76° to +150°. No scrap value and is a significant deterrent to theft. Complete assembly; ready to install.

Hand Hole Cover Assy,

Galvanized Steel

AP-1090-GLV fits 4” x 6” Hand Hole

AP-1091-GLV fits 5” x 8” Hand Hole

Pelco’s galvanized steel Hand Hole Cover is available in 2 sizes. If required cover can be powder coated over galvanized steel. Complete assembly; ready to install.

Note: 1. All Hand Hole assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U2-5

To Oil

Switches

Capacitor Bank Junction Box Assy w/

Meter Base, Transformer Cable &

Lindsey Sensor Cable

To Oil

Switch

CP-0135-PNC

To

Transformer

6-Jaw

Meter Base

To Oil

Switches

To Lindsey

Sensor

Consist of:

CP-0122-PNC Capacitor Bank Junction Box

CP-0125-PNC Transformer Cable

CP-0120-PNC 6-Jaw Meter Base

CP-0124-PNC Meter Base Cable

CP-0121-PNC Lindsey Sensor Cable

Capacitor Bank Junction Box Assy w/ Oil Switch Cables, Meter Base &

Transformer Cable

To Oil

Switch

(top & bottom)

CP-0123-PNC

To

Transformer

6-Jaw

Meter Base

Consist of:

CP-0122-PNC Capacitor Bank Junction Box

CP-0125-PNC Transformer Cable

CP-0120-PNC 6-Jaw Meter Base

CP-0124-PNC Meter Base Cable

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-1

To Oil

Switches

To

Transformer

Capacitor Bank Junction Box Assy w/

Meter Base & Lindsey Sensor Cable

J61 Configuration

To Oil

Switch

CP-0209-LS-J61-PNC

6-Jaw

Meter Base

To Lindsey Sensor

Consists of:

CP-0212-PNC Capacitor Bank Junction Box

CP-0124-PNC Meter Base Cable

CP-1157-PNC Lindsey Sensor Cable

CP-0210-PNC 6-Jaw Meter Base, J61 Configuration

Capacitor Bank Junction Box Assy w/

Meter Base & Lindsey Sensor Cable

J62 Configuration

To Oil

Switch

CP-0209-LS-J62-PNC

To Oil

Switches

To

Transformer

6-Jaw

Meter Base

Note: 1. All junction box assemblies are weather-resistant.

To Lindsey Sensor

Consists of:

CP-0212-PNC Capacitor Bank Junction Box

CP-0124-PNC Meter Base Cable

CP-1157-PNC Lindsey Sensor Cable

CP-0120-PNC 6-Jaw Meter Base, J62 Configuration

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-2

8/10/16

To Oil

Switches

To

Transformer

Capacitor Bank Junction Box Assy w/

Meter Base & Fisher Pierce Sensor Cable

J61 Configuration

To Oil

Switch

CP-0209-FP-J61-PNC

6-Jaw

Meter Base

Consists of:

CP-0212-PNC Capacitor Bank Junction Box

CP-0124-PNC Meter Base Cable

CP-0145-PNC Fisher-Pierce Sensor Cable

CP-0210-PNC 6-Jaw Meter Base, J61 Configuration

To Fisher-Pierce Sensor

Capacitor Bank Junction Box Assy w/

Meter Base & Fisher Pierce Sensor Cable

J62 Configuration

To Oil

Switch

CP-0209-FP-J62-PNC

To Oil

Switches

To

Transformer

6-Jaw

Meter Base

Note: 1. All junction box assemblies are weather-resistant.

Consists of:

CP-0212-PNC Capacitor Bank Junction Box

CP-0124-PNC Meter Base Cable

CP-0145-PNC Fisher-Pierce Sensor Cable

CP-0120-PNC 6-Jaw Meter Base, J62 Configuration

To Fisher-Pierce Sensor

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-3

To Oil

Switches

To

Transformer

6-Jaw

Meter Base

Capacitor Bank Junction Box Assy w/

Meter Base & Transformer Cable

To Oil

Switch

CP-0200-PNC

Consists of:

CP-0201-PNC Capacitor Bank Junction Box

CP-0125-PNC Transformer Cable

CP-0120-PNC 6-Jaw Meter Base

CP-0124-PNC Meter Base Cable

Capacitor Bank Junction Box Assy w/

Meter Base & Transformer Cable for

J40 Configuration

To Oil

Switch

CP-0202-PNC

To Oil

Switches

To

Transformer

4-Jaw

Meter Base

Consists of:

CP-0203-PNC Capacitor Bank Junction Box

CP-0205-PNC 4-Jaw Meter Base

CP-0124-PNC Meter Base Cable

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-4

8/10/16

To Oil

Switches

To

Transformer

Capacitor Bank Junction Box Assy w/ Oil Switch Cables &

Lindsey Sensor Cable

To Oil

Switch

CP-0208-LS-PNC

To Oil

Switches

Consists of:

CP-0211-PNC Capacitor Bank Junction Box

CP-1157-PNC Lindsey Sensor Cable

To Lindsey Sensor

Capacitor Bank Junction Box Assy w/ Oil Switch Cables &

Fisher-Pierce Sensor Cable

To Oil

Switch

CP-0208-FP-PNC

To

Transformer

Note: 1. All junction box assemblies are weather-resistant.

Consists of:

CP-0211-PNC Capacitor Bank Junction Box

CP-0145-PNC Fisher-Pierce Sensor Cable

To Fisher-Pierce Sensor

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-5

To Oil

Switches

Capacitor Bank Junction Box Assy w/ Oil Switch Cables

6-Circuit Terminal Strip

To Oil

Switch

CP-0122-PNC

Cross arm mount. Supplied with a 6-circuit terminal strip, oil switch cables, and Mil-Spec connectors for sensor cable and meter base.

Capacitor Bank Junction Box Assy w/ Oil Switch Cables

6-Circuit Terminal Strip &

Transformer Cable

To Oil

Switches

To Oil

Switch

CP-0207-PNC

To

Transformer

Cross arm mount. Supplied with a 6-circuit terminal strip, oil switch cables, and transformer cable. No provisions for sensor cable or meter base.

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-6

8/10/16

Capacitor Bank Junction Box Assy w/ Oil Switch & Transformer Cables

& Sensor Current Connector

To Oil

Switches

To Oil

Switch

CP-0211-PNC

To

Transformer

Cross arm mount. Supplied with a 6-circuit terminal strip, oil switch cables, transformer cable and Mil-Spec connectors for sensor cable. No provision for meter base.

Capacitor Bank Junction Box Assy w/ Oil Switch & Transformer Cables

& Sensor Current Connector

To Oil

Switches

To Oil

Switch

CP-0212-PNC

To

Transformer

Cross arm mount. Supplied with a 6-circuit terminal strip, oil switch cables, transformer cable and Mil-Spec connectors for sensor cable and meter base.

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-7

Junction Boxes

Capacitor Bank Junction Box Assy w/ Oil Switch Cables

8-Circuit Terminal Strip

To Oil

Switches

To Oil

Switch

CP-0201-PNC

Cross arm mount. Supplied with a 8-circuit terminal strip with oil switch cables, and and Mil-Spec connectors for transformer cable, sensor cable, and meter base.

Capacitor Bank Junction Box Assy w/ Oil Switch & Transformer Cables

6-Circuit Terminal Strip

To Oil

Switches

To Oil

Switch

CP-0203-PNC

To

Transformer

Cross arm mount. Supplied with a 6-circuit terminal strip, oil switch cables, transformer cable, and Mil-

Specc connector for meter base. No provisions for sensor cable.

Note: 1. All junction box assemblies are weather-resistant.

All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-8

8/10/16

Junction Boxes

Capacitor Bank Junction Box Assy

VAR Control

To Oil

Switch

CP-0136-PNC

Pole mount. Volt-ampere reactive junction box supplied with a 8-circuit terminal strip, oil switch cable without the connector, a cord grip, and a CGB.

Capacitor Bank Junction Box Assy

VAR Control

CP-0216-PNC

Note: 1. All junction box assemblies are weather-resistant.

All assemblies are supplied standard with stainless steel fasteners.

Pole mount. Volt-ampere reactive junction box supplied with a 8-circuit terminal strip and watertight

CGB’s.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-9

Junction Boxes

To Oil

Switches

Capacitor Bank Junction Box Assy w/ Oil Switch & Transformer Cables

& Sensor Current Connector

To Oil

Switch

CP-0143-PNC

To Oil

Switches

To

Transformer

Pole mount. Supplied with a 6-circuit terminal strip, oil switch cables, transformer cable, and Mil-Spec connector for meter base. Accepts Lindsey or Fisher

Pierce sensor cable.

Capacitor Bank Junction Box Assy w/ Meter Base, Oil Switch

& Transformer Cables

To Oil

Switch

CP-0144-PNC

To

Transformer

6-Jaw

Meter Base

Consists of:

CP-0143-PNC Capacitor Bank Junction Box

CP-0153-PNC 6-Jaw Meter Base

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-10

8/10/16

To Oil

Switches

Junction Boxes

Capacitor Bank Junction Box Assy w/ Oil Switch Cables

To Oil

Switch

CP-0163-PNC

Cross arm mount. Supplied with a 6-circuit terminal strip, oil switch cables, cord grip, & CGB.

Capacitor Bank Junction Box Assy w/ Meter Base &

Lindsey Sensor Cable

To Oil

Switches

To Oil

Switch

CP-0189-PNC

To

Transformer

6-Jaw

Meter Base

Consists of:

CP-0122-PNC Capacitor Bank Junction Box

CP-0125-PNC Transformer Cable

CP-0187-PNC 6-Jaw Meter Base

CP-0124-PNC Meter Base Cable

CP-0121-PNC Lindsey Sensor Cable

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-11

Capacitor Bank Junction Box Assy w/ Oil Switch Cables

8-Circuit Terminal Strip

To Oil

Switches

To Oil

Switch

CP-0217-PNC

To

Transformer

Cross arm mount. Supplied with an 8-circuit terminal strip, oil switch cables, transformer cable, meter cable, and a knock-out for sensor cable.

To Oil

Switches

Capacitor Bank Junction Box Assy w/

Meter Base & Oil Switch,

Transformer & Sensor Cables with

CGB 8-Circuit Terminal Strip

To Oil

Switch

CP-0220-PNC

To

Transformer

6-Jaw

Meter Base

Consists of:

CP-0222-PNC Capacitor Bank Junction Box

CP-0113-PNC 6-Jaw Meter Base

CP-2030-300-M1 Meter Base Cable

CP-1231-180 Lindsey Sensor Cable

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-12

8/10/16

Capacitor Bank Junction Box Assy w/ Oil Switch Cables

To Oil

Switches

To

Transformer

To Oil

Switch

CP-0222-PNC

Rack mount. Supplied with a 6-circuit terminal strip, oil switch cables, transformer cable, and CGB’s for sensor or meter cables.

Capacitor Bank Junction Box Assy

Oil Switch & Transformer Cables

To Oil

Switches

To Oil

Switch

CP-0227-PNC

To

Transformer

Rack mount. Supplied with a 6-circuit terminal strip, mounted horizontally, oil switch cables, transformer cable, and knock-out for sensor or meter cables.

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U3-13

Junction Boxes

Voltage Control Box Assy w/

8-Circuit Terminal Strip

CP-0148-PNC

Pole mount. Supplied with an 8-circuit terminal strip and CGB’s on side and bottom of box.

Recloser Junction Box Assy w/

8-Circuit Terminal Strip

CP-0214-PNC

Cross arm mount. Supplied with an 8-circuit terminal strip and Mil-Spec connector.

Note: 1. All junction box assemblies are weather-resistant.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-14

8/10/16

Meter Bases

4-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

Mil-Spec Connector Alum

For J40 Configuration

CP-0205-PNC

4-Jaw Meter Base w/ mounting bracket and ring. Includes a Mil-Spec connector on the bottom. For J40 wiring configurations.

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring,

CGB & 4 Wire Lug Locations

CP-0146-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a 3/4” .55”-.65” Wire CGB on the bottom. Contains 4 wire lug connections.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U3-15

Meter Bases

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

CGB w/ 7 Conductor x 25’ Cable

For J62 Configuration

CP-0138-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a CGB with 12 AWG 7 conductor x 25’ cable on the bottom. For J62 wiring configurations.

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

CGB w/ 7 Conductor x 50’ Cable

For J62 Configuration

CP-0153-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a CGB with 12 AWG 7 conductor x 50’ cable on the bottom. For J62 wiring configurations.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-16

4/7/15

Meter Bases

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

Mil-Spec Connector

For J61 Configuration

CP-0210-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a Mil-Spec connector on the bottom. For J61 wiring configurations.

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

Mil-Spec Connector

For J62 Configuration

CP-0120-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a Mil-Spec connector on the bottom. For J62 wiring configurations.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U3-17

Meter Bases

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

Mil-Spec Connector

For J63 Configuration

CP-0187-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a Mil-Spec connector on the bottom. For J63 wiring configurations.

6-Jaw Meter Base w/

Mounting Bracket, Meter Ring, &

Mil-Spec Connector

For PHI/MATISS Configuration

CP-0190-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a Mil-Spec connector on the bottom. For PHI/MATISS wiring configurations.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-18

4/7/15

Meter Bases

Meter Base, 6-Jaw w/

Mounting Bracket & Meter Ring,

Alum

CP-0113-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a 3/4” .45”-.56” wire CGB on the bottom.

Meter Base, 6-Jaw w/

Meter Ring, Alum

CP-0223-PNC

6-Jaw Meter Base w/ mounting bracket and ring. Includes a 3/4” .55”-.65” wire CGB on the bottom.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U3-19

Brackets & Banding

This page is intentionally left blank.

Page U3-20 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Cable Assemblies

Oil Switch Base Cable w/

Mil-Spec Connector

CP-0226 -

Length

120=120”

480=480”

- PNC

3-conductor 14 AWG cable x 120” or 480” long with female Mil-Spec connector on juction box end.

Transformer Cable w/

Mil-Spec Connector

CP-0125-PNC

2-conductor 12 AWG cable x 10’-6” long with female Mil-Spec connector on junction box end.

For use with transformer 120V secondary power supply.

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-21

Cable Assemblies

Lindsey Sensor Cable w/

Mil-Spec Connectors

CP-1157-PNC

2-conductor 16 AWG cable x 25’-0” long with male and female Mil-Spec connectors. For use with Lindsey Sensor and Junction Box wired for Lindsey or Fisher Pierce Sensors.

Lindsey Sensor Cable w/

Mil-Spec Connectors

CP-0121-PNC

2-conductor 16 AWG cable x 20’-6” long with male and female Mil-Spec connectors. For use with Lindsey Sensor and Junction Box wired for Lindsey Sensor only.

Page U3-22 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Cable Assemblies

Lindsey Sensor Cable w/

Mil-Spec Connectors

CP-0193-PNC

4-conductor 16 AWG cable x 20’-6” long with male Mil-Spec connectors. For use with Lindsey

Sensor.

Lindsey Base Cable w/

Mil-Spec Connector

Length

CP-1231 - - PNC

180=180”

2-conductor 16 AWG cable x 180” long with male Mil-Spec connector on junction box end.

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-23

Cable Assemblies

Fisher-Pierce Sensor Cable w/

Mil-Spec Connectors

CP-0145-PNC

3-conductor 16 AWG cable x 25’ long with male and female Mil-Spec connectors. For use with

Fisher-Pierce Sensor.

Fisher-Pierce Sensor Cable w/

Mil-Spec Connector

CP-0192-PNC

3-conductor 16 AWG cable x 25’ long with male

Mil-Spec connector on junction box end. For use with Fisher-Pierce Sensor.

Page U3-24 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Cable Assemblies

Meter Base Cable w/

Mil-Spec Connectors for

J61 & J62 Wiring Configuration

CP-0124-PNC

7-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For use with J61 and J62 wiring configuration.

Meter Base Cable w/

Mil-Spec Connectors for

J40 Wiring Configuration

CP-0204-PNC

5-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For use with J40 wiring configuration.

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-25

Cable Assemblies

Meter Base Cable w/

Mil-Spec Connector

CP-0195-PNC

7-conductor 12 AWG cable x 30’ long with male and female Mil-Spec connector on junction box end.

Meter Base Cable w/

Mil-Spec Connectors

CP-0191-PNC

7-conductor 12 AWG cable x 35’ long with female Mil-Spec connectors both ends and protective cap one end. For connecting junction box to meter.

Page U3-26 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Cable Assemblies

Meter Base Cable w/

Mil-Spec Connectors

Non-Standard Wiring

CP-0179-PNC

7-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For connecting junction box to meter with nonstandard special pin arrangement.

Reclosure Box Cable w/

Mil-Spec Connectors

CP-0215-PNC

8-conductor 12 AWG cable x 40’-6” long with male and female Mil-Spec connectors. For connecting reclosure box to meter.

4/7/15

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U3-27

Wiring Harness

15”

Transformer Wiring Harness,

3-Phase Pad Mount SME

CP-2039-PNC

82”

10 AWG Transformer Wiring Harness for

3-phase pad mounted SME to a meter base

Page U3-28 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Cable Retainers

Cable Retainer Assy,

For 4” Foundation Anchor,

Galvanized Steel

SP-6224-GLV

Pelco’s anti-theft Cable Retainer is the best solution to help prevent copper cable theft in street light poles. Works with Pelco’s PB-5364 4” Foundation Anchor or to existing foundations with a 8”-13-1/2” bolt circle. Secures 3/16” to

1/2” diameter cables.

Cable Retainer Assy,

For 6” Foundation Anchor,

Galvanized Steel

SP-6200-GLV

Pelco’s anti-theft Cable Retainer is the best solution to help prevent copper cable theft in street light poles. Works with Pelco’s PB-5372 6” Foundation Anchor or to existing foundations with a 9-1/2”-13-1/2” bolt circle. Secures 3/16” to 1/2” diameter cables.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U4-1

Cable Retainers

Cable Retainer Assy,

For 8” Foundation Anchor,

Galvanized Steel

SP-6205-GLV

Pelco’s anti-theft Cable Retainer is the best solution to help prevent copper cable theft in street light poles. Works with Pelco’s PB-5375 8” Foundation Anchor or to existing foundations with a 11-1/2”-17” bolt circle. Secures 3/16” to

1/2” diameter cables.

Tube Assembly

For 6” Cable Retainer,

Galvanized Steel

Length

SP-6358- -GLV

04.5=4-1/2”

16.38=16-3/8”

6” Cable Retainer

6” Tube Assy

Tranformer Base

The Tube Assembly mounts underneath Pelco’s SP-6200 anti-theft Cable Retainer inside the transformer base. The tube is designed to prevent copper cable theft in street light poles. Available in 4-1/2” or 16-3/8” lengths. Complete with mounting hardware.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U4-2

7/1/13

Door Assy, TB1-17 Tranformer Base

“Copper Safe” Theft Deterrent

Steel

PB-5520-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Transformer Doors are shatterresistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Door Assy, TB1-20 Tranformer Base

“Copper Safe” Theft Deterrent

Steel

PB-5526-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Transformer Doors are shatterresistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

7/1/13

Page U4-3

Base Doors

Door Assy, TB-17H Tranformer Base

“Copper Safe” Theft Deterrent

Steel

PB-5536-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Transformer Doors are shatterresistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Door Assy, Union Metal Medium

Tranformer Base

“Copper Safe” Theft Deterrent

Steel

PB-5529-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Transformer Doors are shatterresistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U4-4

4/7/15

Base Doors

Door Assy, AB Chance

Tranformer Base

“Copper Safe” Theft Deterrent

Steel

PB-5531-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Transformer Doors are shatterresistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U4-4a

Hand Hole Covers

Hand Hole Cover Assy,

“Copper Safe” Theft Deterent

For 4-1/2” x 9-3/4” Oval Opening

Steel

AP-3172-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Hand Hole Covers are shatter-resistant and pull-off resistant to protect against copper theft. The overall size of the AP-3172 is 5-1/4” x 10-1/2”. Typically powder coated

P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Hand Hole Cover Assy,

“Copper Safe” Theft Deterent

For 3-3/8” x 9-7/8” Oval Opening

Steel

AP-3173-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Hand Hole Covers are shatter-resistant and pull-off resistant to protect against copper theft. The overall size of the AP-3173 is 4-3/8” x 10-7/8”. Typically powder coated

P40 Silver, other colors available. Requires AP-5121 Kit for installation.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U4-4b

4/7/15

Hand Hole Cover Assy,

“Copper Safe” Theft Deterrent

Steel

Coating

AP-3161-

P_ _=Paint for 4” Square Pole w/ Oval Opening

AP-3160-

Coating

P_ _=Paint for 5” Square Pole w/ Rectangular Opening

Pelco’s “Copper Safe” Hand Hole Covers for square poles are shatter-resistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available.

Requires AP-5121 Kit for installation.

Hand Hole Cover Assy,

“Copper Safe” Theft Deterrent

Steel

Coating

AP-3167-

P_ _=Paint for 7” Square Pole w/ 6-3/4” x 4-1/2”

Oval Opening

Pelco’s “Copper Safe” Hand Hole Covers for square poles are shatter-resistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available.

Requires AP-5121 Kit for installation.

Note: 1. All assemblies are supplied standard with stainless steel fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U4-5

Hand Hole Cover Assy,

“Copper Safe” Theft Deterent

5” x 8” for Round Poles

Steel

AP-3158-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Hand Hole Covers for round poles are shatter-resistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available.

Requires AP-5121 Kit for installation.

Hand Hole Cover Assy,

“Copper Safe” Theft Deterrent

4” x 6” for 8” Dia Poles

Galvanized Steel

AP-3162-

Coating

P_ _=Paint

Pelco’s “Copper Safe” Hand Hole Covers for round poles are shatter-resistant and pull-off resistant to protect against copper theft. Typically powder coated P40 Silver, other colors available.

Requires AP-5121 Installation Kit.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U4-6

7/1/13

Hand Hole Covers

Installation Kit,

“Copper Safe” Theft-Deterrent

Hand Hole Covers & Doors

AP-5121-PNC

The “Copper Safe” Installation Kit is required for installing

Pelco’s theft deterrent hand hole covers and doors.

Includes 3/16” & 3/8” drill bits, security extension, and security extension wrench, in a PVC storage case.

Installation Kit is reusable.

7/1/13

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U4-7

Foundation Anchors

Foundation Anchor Assy, 3” Sch 40 x 4’-0”

4-1/2” to 6-1/2” Bolt Circle, 1/2”-13NC Hardware

PB-5369-GLV

17-1/2”

(From Bottom of Plate)

48”

7-3/4”

3-1/2”

10”

1-3/4” x 3”

Handhole

Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.

Note: The Driver Adapter is not required for installation using the Kelly Bar

Adapter. The Kelly Bar Adapter mounts directly to the top plate of the anchor.

For residential, ornamental, and walkway lighting with small bases. (wt. 46 lbs)

Foundation Anchor Assy, 4” Sch 40 x 4’-8”

7-3/4” to 14-3/4” Bolt Circle, 3/4”-10NC Hardware

PB-5364-GLV

56”

17-1/2”

(From Bottom of Plate)

13”

4-1/2” 10”

2-5/8” x 3”

Handhole

Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.

For residential lights, parking lots, and street lights. Typically for pole heights up to 16’. (wt. 94 lbs)

Note: 1. Foundation anchors are hot dip galvanized per ASTM A123.

2. All assemblies are supplied with Grade 5 Galvanized Bolts.

3. All assemblies with hardware are bagged in a nylon weatherproof bag.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U5-1

Medium Foundation Anchor Assy, 6” Sch 40 x 5’-0”

10” to 15” Bolt Circle, 1”-8NC Hardware

PB-5372-GLV

11¼”

60”

(From Bottom of Plate)

15” 6-5/8”

13”

2-5/8” x 12”

Handhole

Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.

For residential lights, parking lots, and street lights. Typically for poles ranging from 20’-30’ in height (wt. 167 lbs)

Heavy Duty Foundation Anchor Assy, 8” Sch 40 x 5’-0”

13” to 18” Bolt Circle, 1-1/4”-7NC Hardware

PB-5375-GLV

60”

(From Bottom of Plate)

11¼”

18”

8-5/8” 13”

2-5/8” x 12”

Handhole

Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.

For street and highway lighting. Typically for poles ranging from 30’-40’ in height (wt. 239 lbs)

Note: 1. Foundation anchors are hot dip galvanized per ASTM A123.

2. All assemblies are supplied with Grade 5 Galvanized Bolts.

3. All assemblies with hardware are bagged in a nylon weatherproof bag.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-2

1/4/16

Foundation Anchors

Foundation Anchor Assy, 8” Sch 20 x 5’-0”

11” to 17” Bolt Circle, 1”-8NC Hardware

PB-5534-GLV

11¼”

60”

(From Bottom of Plate)

15-3/4”

8-5/8” 14”

2½” x 12”

Handhole

Pelco’s schedule 20 foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.

For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt. 184 lbs)

Foundation Anchor Assy, 10” Sch 20 x 10’-0”

13-1/2” to 17” Bolt Circle, 1”-8NC Hardware

PB-5535-GLV

15-3/4”

120”

11¼”

(From Bottom of Plate)

10-3/4” 16”

3” x 12”

Handhole

Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.

For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt. 359 lbs)

Note: 1. Foundation anchors are hot dip galvanized per ASTM A123.

2. All assemblies are supplied with Grade 5 Galvanized Bolts.

3. All assemblies with hardware are bagged in a nylon weatherproof bag.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

1/4/16

Page U5-2a

Foundation Anchors

Foundation Anchor Assy, 6” Sch 40

19” to 14” Bolt Circle, 1”-8NC Hardware

Length

PB-5537 -

48=4’-0”

60=5’-0”

72=6’-0”

84=8’-0”

- GLV

11¼”

Length

(From Bottom of Plate)

12”

6-5/8”

12”

2-5/8” x 12”

Handhole

Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.

Typically for residential lights, parking lots, and street lights with poles ranging from 20’-30’ in height.

48’ (wt. 115 lbs.); 60” (wt. 134 lbs.); 72” (wt. 152 lbs.); 84” (wt. 172 lbs.)

Foundation Anchor Assy, 8” Sch 20 x 5’-0”

8” to 11” Bolt Circle, 3/4”-10NC Hardware

SP-6360-GLV

12”

60”

(From Bottom of Plate)

10” 8-5/8”

13-1/2”

3” x 24”

Handhole

Pelco’s SP-6360 schedule 20 foundation anchor is designed to be stabilized with a concrete footing. It features a top plate which enables the bolt head to be inserted after the anchor is installed. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.

Typically for poles up to 30’ in height. (wt. 141 lbs)

Note: 1. Foundation anchors are hot dip galvanized per ASTM A123.

2. All assemblies are supplied with Grade 5 Galvanized Bolts.

3. All assemblies with hardware are bagged in a nylon weatherproof bag.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-2b

1/4/16

Foundation Anchors

Driver Adapter, Foundation Anchor w/ 9” to 14-3/4” Bolt Circle

Steel

PB-0604-ZN1

Kelly Bar

Adapter

Required to connect the Kelly Bar adapter (not supplied) to the foundation anchor for installation. Special hole pattern permits installation of foundation anchors having bolt circle diameters of 9” to 14-3/4”. Zinc1 finish.

Leveling Shim, 1/16” x 2” x 2”

Galvanized Steel

PB-0602-GLV

Leveling Shim, 1/8” x 2” x 2”

Galvanized Steel

PB-0603-GLV

Note: 1. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U5-3

Anchor Bolt Cages

Anchor Bolt Cage w/ Hardware

1/2”-13NC x 7-1/2”, 36” Rebar

5-1/2” Bolt Circle, Galv

2” Projection

Typical Footing Detail

Anchor

Bolt

Cage

Ground

Concrete

AP-1049-GLV

Anchor Bolt Cage w/ Hardware

3/4”-10NC x 18”, 36” Rebar

8-1/2” Bolt Circle, Galv

3½” Projection

Typical Footing Detail

Anchor

Bolt

Cage

Ground

Concrete

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. Footing shall be determined by end user.

AP-1089-GLV

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-4

1/4/16

Anchor Bolt Cages

Anchor Bolt Cage w/ Hardware

3/4”-10NC x 18”, 36” Rebar

13” Bolt Circle, Galv

3¼” Projection

Typical Footing Detail

Anchor

Bolt

Cage

Ground

Concrete

AP-1095-GLV

Anchor Bolt Cage w/ Hardware

1”-8NC x 36” Anchor Bolts

11” Bolt Circle, Galv

4” Projection

Typical Footing Detail

Anchor

Bolt

Cage

Ground

Concrete

AP-3129-GLV

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. Footing shall be determined by end user.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

1/4/16

Page U5-5

Anchor Bolt Cages

Anchor Bolt Cage w/ Hardware

1”-8NC x 36”

15” Bolt Circle, Galv

4” Projection

Typical Footing Detail

Anchor

Bolt

Cage

Ground

Concrete

AP-3136-GLV

Note: 1. All assemblies are supplied standard with galvanized fasteners.

2. Footing shall be determined by end user.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-6

1/4/16

Anchor Bolt Sets

Anchor Bolt Set of 4 w/ Hardware

3/4”-10NC x 18”, Galv

PB-5306-GLV

Note: Includes 4 Bolts, 4 Washers, and 4 Nuts.

Anchor Bolt Set of 4 w/ Hardware

1/2”-13NC x 7-1/2”, Galv

AP-1046-GLV

Note: Includes 4 Bolts, 8 Washers, and 8 Nuts.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U5-7

Anchor Bolt Sets

Anchor Bolt Set of 4 w/ Plate Washers

3/4”-10NC x 18”, Galv

PB-5371-GLV

Includes 4 Bolts, 4 Plate Washers, 4 Washers, and 4 Nuts.

Anchor Bolt Set of 4 w/ Hardware

1”-8NC x 36”, Galv

Template

AP-1007- -GLV

1=12” Bolt Circle

2=12.75” Bolt Circle

3=11” Bolt Circle

Includes 4 Bolts, 4 Lock Washers, 8 Washers, and 8 Nuts.

Note: 1. All assemblies are supplied standard with galvanized fasteners.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-8

4/7/15

Transformer Bases

Transformer Base, TB2-17 w/ Pelco Door & Washers, Alum

PB-5514-

Coating

PNC=Process No Color

P_ _=Paint

Pelco’s TB2-17 Transformer Base stands 17” tall with a 12.04” square top, 13.08” square bottom, and has a 10”-12” top and bottom bolt circle. Comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers.

Transformer Base, TB1-17 w/ Pelco Door & Washers, Alum

PB-5517-

Coating

PNC=Process No Color

P_ _=Paint

Pelco’s TB1-17 Transformer Base stands 17” tall with a 13.12” square top, 15.38” square bottom, and has a 10½”-13½” top bolt circle and 13”-15” bottom bolt circle. Comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/18/15

Page U5-9

This page is intentionally left blank.

Page U5-9a www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/18/15

Transformer Bases

Transformer Base, TB1-17 Modified w/ Pelco Door & Washers, Alum

Coating

PB-5538-

PNC=Process No Color

P_ _=Paint

Pelco’s TB1-17 Transformer Base stands 17” tall with a 13.12” square top, 15.38” square bottom, and has a 10½”-13½” top bolt circle and 10½”-12

15

/

16

” bottom bolt circle. Comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers.

Hardware Kit, Transformer Base

1”-8NC x 4”, Set of 4, Galv

PB-5437-GLV

For mounting base plates to the top of Transformer Bases.

Includes 4 Hex Head Bolts, 8 Washers, 4 Lock Washers, and

4 Hex Nuts.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/18/15

Page U5-9b

Plastic Replacement Doors

Plastic replacement doors for lighting pole bases are fabricated from tough hi-density UV inhibited plastic which offers excellent impact resistance. They give the appearance of aluminum, never needing painted and are a significant deterrent to vandalism since they have no scrap value. Pelco’s doors withstand temperature extremes of -78 o

to +150 o

fahrenheit.

L

T

H

Door Latch

Transformer Door, Plastic

Base

Manufacturer

PB-0522- -PNC

*See Chart

H

C/L

H

C/L

TW

D

*BASE MFG

03

DESCRIPTION

Valmont, Flat

04

Union Metal, Flat

S C/L

DOOR SIZE

H TW BW

5/16” 12-5/8”

13-3/4” 7-15/16” 9-1/4”

5/16” 13-5/16”

13-15/16” 7-59/64” 9-1/4”

HOLE

D

3/8”

3/8”

LATCH

L H T

N/A N/A N/A

N/A N/A N/A

BW

TW D

S

BW

S

*BASE MFG

05-06

DESCRIPTION

Valmont-Akron, Flat

(TB-1AF, TB-2AF, TB-3AF)

07

12

19

A.B. Chance, Flat

Hapco, Flat

(56631, 56632)

P & K, C-98612, Flat

(M-81)

S

1/4”

3/8”

C/L

DOOR SIZE

H TW BW

13-1/2”

13-1/4” 9-1/8” 9-1/2”

13-5/16”

13-7/8” 9-1/16” 9-13/16”

HOLE

D

3/8”

3/8”

5/16” 13-5/8”

13-7/16” 9-1/8” 9-5/8” 3/8”

3/8” 16-21/32”

16-1/2” 10-1/2” 13-1/2”

11/32”

LATCH

L H T

N/A N/A N/A

N/A N/A N/A

N/A N/A N/A

N/A N/A N/A

H

C/L

H

C/L

TW D

BW

S

TW

S

*BASE MFG

01

08

15

16

22

DESCRIPTION

Kaiser, Curved w/ Latch

P & K, Flat w/ Latch

(TB2A, TB2C, TB5C)

Akron, Flat w/ Latch

(TB-20S)

Akron, Flat Short w/ Latch

(TB-17S)

Akron, Curved w/ Latch

(FP-5190)

S

3/8”

1/4”

1/4”

C/L

13-3/4”

11-7/8”

12”

DOOR SIZE

H TW BW

14-7/8” 10-5/8” 11-3/4”

13-1/4” 8-1/4” 9-15/16”

11/32” 3-1/4” 1-3/4” 5/16”-18

13-3/8” 9-1/8” 9-5/8”

5/16” 11-1/8”

11-23/32” 9-1/8” 9-5/8”

3/8” 12” 13-5/16” 8-1/2” 9-1/2”

HOLE

D

LATCH

L H T

11/32”

4-5/8” 1-3/4” 5/16”-18

5/16”

3-3/8” 1-7/8” 1/4”- 20

5/16”

11/32”

2-3/8” 1-1/8” 1/4”- 20

3-1/4” 1-3/4” 5/16”-18

*BASE MFG

10

DESCRIPTION

P & K, Flat w/ Latch

(REVERSED OPENING TB-1, TB-2)

S

9/16”

C/L

12”

DOOR SIZE

H W BW

13-3/8” 8-3/8” 9-5/8”

HOLE

D

LATCH

L H T

11/32”

3-1/4” 1-3/4” 5/16”-18

BW

D

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-10

4/7/15

Plastic Replacement Doors

H

C/L

TW

D

*BASE MFG

11

DESCRIPTION

P & K, Flat Short w/ Latch

(TB-4)

S C/L

DOOR SIZE

H W BW

5/16” 9-13/16”

11-1/8” 9-9/16” 11-5/8”

HOLE

D

LATCH

L H T

11/32”

3-1/4” 1-3/4” 5/16”-18

BW

TW

D

S

H

C/L

*BASE MFG

13

25

DESCRIPTION

Valmont, Flat

FAB, Flat

S

DOOR SIZE

H TW BW

5/16” 12-15/16”

13-7/8” 7-15/16” 9-1/4”

5/16”

C/L

12-7/8”

13-5/8” 8-1/2” 9-3/4”

HOLE

D

3/8”

5/16”

LATCH

L H T

N/A N/A N/A

N/A N/A N/A

BW

TW

S

H

C/L

*BASE MFG

18

DESCRIPTION S

Akron, Flat, Hinged w/ Latch

(REVERSE OPENING TB-17H)

N/A

C/L

DOOR SIZE

H W BW

10-3/16”

11-5/8” 9-1/8” 9-11/16”

HOLE

D

LATCH

L H T

5/16”

3-3/8” 1-7/8” 1/4”- 20

BW

D

TW

D

H

C/L

*BASE MFG

24

DESCRIPTION

Union Metal, Flat w/ Latch

S

5/16”

C/L

DOOR SIZE

H W BW

3-5/16”

13-3/4” 7-59/64” 9-1/4”

HOLE

D

LATCH

L H T

13/32”

3-3/8” 11/16” 3/8”-16

H C/L

BW

TW

D

S

BW

S

*BASE MFG

14

DESCRIPTION S

P & K, Curved, Small w/ Latch

(HBS-6)

7/32”

C/L

4-1/2”

DOOR SIZE

H W BW

5-1/4” 5-3/16” 6”

HOLE

D

LATCH

L H T

9/32” 2-3/8” 1-1/8” 1/4”- 20

Note:

1. All assemblies are supplied standard with stainless fasteners.

2. Doors with latches include latch & vandal-resistant screw. Doors without latches are shipped without hardware.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U5-11

Conduit Topper

Conduit Cover, Pelco Topper,

ABS Plastic w/ Safety Orange Reflectors

8-1/2” to 15” Bolt Circle

PB-0530-PNC

Covers wiring temporarily, preventing damage or injury. Easily fits over installed anchor bolts and uses existing hardware.

Made from durable ABS molded plastic.

Adapter, Pelco Topper

HMD Plastic

8-3/4” to 20-1/2” Bolt Circle

PB-0636-PNC

Easily slips over the Pelco Topper to accomodate up to 2” anchor bolts on a 20-1/2” bolt circle.

Note: 1. Febricated from black ABS plastic.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U5-12

4/7/15

Anchor Bolt Template

Anchor Bolt Template, ABS Plastic

AP-3085-PNC

Note:

- Quick, easy set-up in minutes

- 41 different bolt circle patterns,

5-1/2” to 25-1/2”

- Easy guide divots every 1/2”

- Reusable

The Bolt Template is a reusable “tool” used for layout of bolts to be used in concrete for the future installation of poles. Constructed of UV stabilized ABS plastic, the Bolt Templatemay be used for various bolt patterns from 5-1/2” up to 25-1/2”. Accepts multiple conduits through the center with the capacity for up to two 2” conduits and multiple smaller conduits at one time.

Note: 1. Febricated from black ABS plastic.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U5-13

Luminaires

AP- - - - - - - - -

Model

Wattage Voltage Photocell Tenon

Adapter

Globe Finial/

Color

Rib/

Color

P_ _=Paint

Wattage:

AP-0207

50HPS

100HPS

150HPS

250HPS

AP-0208

50MH

100MH

150MH

250MH

AP-7520

37LED

-

-

-

Bristol Series

AP-0207- Bristol High Pressure Sodium

AP-0208- Bristol Metal Halide

AP-7520- Bristol LED

Voltage:

AP-0207

120V

240V

AP-0208

120V

240V

277V

480V

277V

480V

Note: All LED Luminaires are 120-277V

AP-7520

UNV

UNV

UNV

-

Photocell:

AP-0207

NPC

AP-0208

NPC

PCS

PC

PCS

PC

Note: All LED Luminaires use 7-pin socket

AP-7520

NPC

7P

PC

Tenon Adapter:

AP-0207

TA

AP-0208

TA

AP-7520

TA

Note: Adapter 2-7/8” OD post to 3-1/2” ID luminaire

None

Socket Only w/ Photocell

Globe:

AP-0207

PLSM

PLLG

T3AC

T5AC

T3ACPR

T5ACPR

T3ACSR

T5ACSR

T3DS59

T5DS59

AP-0208

PLSM

PLLG

T3AC

T5AC

T3ACPR

T5ACPR

T3ACSR

T5ACSR

T3DS59

T5DS59

AP-7520

-

PLLG

T3AC

T5AC

-

-

-

-

T3DS

T3DS

Note: 59 refers to P59 Textured Black, others colors available

Polycarbonate Small

Polycarbonate Large

Type III Acrylic

Type V Acrylic

Type III Acrylic, Perforated Reflector

Type V Acrylic, Perforated Reflector

Type III Acrylic, Solid Reflector

Type V Acrylic, Solid Reflector

Type III Acrylic, Dark Sky, Color

Type V Acrylic, Dark Sky, Color

The Bristol Series Luminaires are available in metal halide, high pressure sodium, or LED and provide the look and charm of history. A unique modular electrical unit provide easy access for service. The Bristol Fixture can be customized to provide a personalized style by selecting the lamp wattage, voltage, photocell, globe type, finial, and paint color.

Acrylic Globe

34.6”

Finial/Color:

AP-0207

BL59

ST59

AP-0208

BL59

ST59

AP-7520

BL59

ST59

3” Ball, Color

Steeple, Color

SI59

FL59

SI59

FL59

SI59

FL59

Note: 59 refers to P59 Textured Black, others colors available

Spire, Color

Fleur, Color

Ribs/Color:

AP-0207 AP-0208 AP-7520

T59

TO59

S59

T59

TO59

S59

T59

TO59

S59

Tall, Color

Tall Open, Color

Short, Color

SO59 SO59 SO59

Note: 59 refers to P59 Textured Black, others colors available

Short Open, Color

3” Ball

Tall

Steeple

Tall Open

Spire Fleur

Short Short Open

Acrylic Globe

Polycarbonate Globe w/ Decorative Ribs

36.0”

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/9/16

Page U6-1

Luminaires

AP- - - - - -

Model

Wattage Voltage Photocell Finial/

Color

P_ _=Paint

Windsor Series

AP-0216- Windsor High Pressure Sodium

AP-0217- Windsor Metal Halide

AP-7521- Windsor LED

The Windsor Series luminaires are available in metal halide, high pressure sodium, or LED. The carriage fixtures are antique in appearance with a unique modular electrical unit for easy service access. The lighting panels have unique photometrics that give the appearance of multiple light sources. The Windsor Fixture can be customized by selecting the lamp wattage, voltage, photocell, finial, and paint color.

Wattage:

AP-0216

50HPS

100HPS

-

-

AP-0217

-

100MH

150MH

175MH

AP-7521

37LED

-

-

-

Voltage:

AP-0216

120V

AP-0217

120V

208V

240V

277V

208V

240V

277V

480V 480V

Note: All LED Fixtures are 120-277V

AP-7521

UNV

UNV

UNV

UNV

-

Photocell:

AP-0216

NPC

PCS

AP-0217

NPC

PCS

PC PC

Note: All LED Luminaires use 7-pin socket

AP-7521

NPC

7P

PC

None

Socket Only w/ Photocell

Finial/Color:

AP-0216

BL59

ST59

SI59

FL59

AP-0217

BL59

ST59

SI59

FL59

AP-7521

BL59

ST59

SI59

FL59

Note: 59 refers to P59 Textured Black, others colors available

3” Ball, Color

Steeple, Color

Spire, Color

Fleur, Color 3” Ball Steeple Spire Fleur

31.3”

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-2

12/9/16

Luminaires

Voltage:

AP-0333

120V

208V

240V

277V

-

Photocell:

AP-0333

NPC

PCS

PC

AP- - - - - - -

Model

Wattage Voltage Photocell Globe Finial/

Color

P_ _=Paint

Newport Series

AP-0333- Newport High Pressure Sodium

AP-0334- Newport Metal Halide

The Newport Series luminaires are available in metal halide or high pressure sodium. The smaller design creates an atmosphere of simplicity, while the unique modular electrical unit provides easy access for service. The

Newport Fixtures can be customized by selecting the lamp wattage, voltage, photocell, globe, finial, and paint color.

Wattage:

AP-0333

100HPS

AP-0334

100MH

AP-0334

120V

-

240V

277V

480V

AP-0334

NPC

PCS

PC

None

Socket Only w/ Photocell

Globe:

AP-0333

PLSM

T3AC

T5AC

T3ACPR

T5ACPR

T3ACSR

T5ACSR

AP-0334

PLSM

T3AC

T5AC

T3ACPR

T5ACPR

T3ACSR

T5ACSR

Polycarbonate Small

Type III Acrylic

Type V Acrylic

Type III Acrylic, Perforated Reflector

Type V Acrylic, Perforated Reflector

Type III Acrylic, Solid Reflector

Type V Acrylic, Solid Reflector

Finial/Color:

AP-0333

BL59

ST59

SI59

FL59

SE59

AP-0334

BL59

ST59

SI59

FL59

SE59

3” Ball, Color

Steeple, Color

Spire, Color

Fleur, Color

Spear, Color

Note: 59 refers to P59 Textured Black, others colors available

3” Ball Steeple Spire Fleur Spear

27.4”

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-3

Luminaires

AP-7501- - - - - - - -

Wattage

LED

Color Temp Voltage Photocell

Optics

Shade

P_ _=Paint

Harrisburg Series

Wattage:

AP-7501

110W-48LED

136W-60LED

Color Temp:

AP-7501

4K

Optics

AP-7501

T3PL

T3NL

T5PL

T5NL

4000 kelvin

Voltage:

AP-7501

480V

UNV

Note: UNV is 120-277V

Photocell:

AP-7501

NPC

PC

Note: Uses 7-pin socket

None w/ Photocell

Type III Polycarbonate

Type III No Globe

Type V Polycarbonate

Type V No Globe

Shade:

AP-7501

SHA

Paint:

AP-7501

P59

Spun Aluminum Shade

Textured Black Powder Coat

AP-7501- Harrisburg LED

The Harrisburg LED luminaire has a simple elegant style, yet brings a state-of-the art photometric and maintenance technology to a unit reminiscent of the 19th century. The Harrisburg luminaire is designed for use with a 2-3/8” diameter arm and can be customized by selecting the lamp wattage, voltage, photocell, optics, shade, and paint color.

39.6”

Decorative Finial &

Spun Aluminum Shade

Decorative Finial &

Twistlock Photocell

Decorative Finial

No Photocell

Note: 1. Custom colors may be available. Contact Pelco for specifics.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-4

12/9/16

Luminaires

AP-7503- - - - - - - - -

Wattage LED

Color Temp

Voltage Photocell Receptacle Optics

Adapter P_ _=Paint

Titan Series

Wattage:

AP-7503

55W-24LED

80W-36LED

136W-60LED

Color Temp:

AP-7503

4K

Voltage:

AP-7503

480V

UNV

4000 kelvin

120-277 Volts

Photocell:

AP-7503

NPC

PC

None w/ Photocell

Receptacle:

AP-7503

blank

7P

Optics:

AP-7503

T3

T5

Adapter:

AP-7503

RA

Paint:

AP-7503

P40

Standard Receptacle

7 Pin Receptacle

Type III

Type V Square Medium

Rectangular Arm Adapter

Silver Powder Coat

AP-7503- Titan Roadway LED

The Titan Series luminaire is a low-profile contemporary streamlined design for roadway, area, and parking applications.

The Titan is designed for use with a 2-3/8” diameter arm, is available with variety of different LED options, and can be customized by selecting the lamp wattage, voltage, photocell, optics, and paint color.

11.3”

Excepts 2-3/8” OD Tenon

4” Min Length

22.8”

Note: 1. Custom colors may be available. Contact Pelco for specifics.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

9/8/16

Page U6-4a

Luminaires

This page is intentionally left blank.

Page U6-4b www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Luminaires

Receptacle:

AP-7503

Blank

7P

Mounting Arm

AP-7505

Blank

Arm

Lens

AP-7505

Blank

ASL

Paint

AP-7505

P62

AP-7505- - - - - - - - -

Wattage LED

Color Temp Voltage Photocell Receptacle Arm Lens P_ _=Paint

Wattage:

AP-7505

40W-9LED

Color Temp:

AP-7505

4K

5K

Voltage:

AP-7505

120V

Photocell:

AP-7505

PC

SC

4000 kelvin

5100 kelvin w/ AP-8560 Photocell w/ AP-8559 Shorting Cap

Sky Hawk Series

AP-7505- Sky Hawk Security LED

The Sky Hawk Series LED luminaire is a multi-purpose dusk-todawn security light for any type of outdoor lighting applications.

The Sky Hawk is designed to mount to a wall surface or onto a

2-3/8” or 1-5/8” diameter arm. Comes standard with photocell and symmetrical lens. Shorting cap, asymetrical lens, and mounting arm are available options.

Standard Receptacle

7 Pin Receptacle & Dimming Ballast

No Arm w/ SP-6348 Arm

Symmetrical Lens w/ AP-8558 Asymetrical Lens

Gray Powder Coat

9.5”

16.2”

16”

29.7”

Sky Hawk with Arm & Photocell

Note: 1. See Reference Section for available paint colors.

Excepts

1-5/8” or 2-3/8”

OD Tenon

3.62”

Mounting Plate

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

2.74”

4/7/15

Page U6-4c

Luminaires

AP- - - - - - - -

Model

Wattage Voltage Photocell Globe Finial/

Color

Rib/

Color

P_ _=Paint

Bristol Series

Wattage:

AP-0378

50HPS

100HPS

150HPS

250HPS

AP-0367

50MH

100MH

150MH

250MH

AP-7522

37LED

-

-

-

AP-0378- Bristol High Pressure Sodium

AP-0367- Bristol Metal Halide

AP-7522- Bristol LED

Voltage:

AP-0378

120V

AP-0367

120V

240V

277V

240V

277V

480V 480V

Note: All LED Luminaires are 120-277V

AP-7522

UNV

UNV

UNV

-

Photocell:

AP-0378

NPC

PCS

PC

AP-0367

NPC

PCS

PC

Note: All LED Luminaires use 7-pin socket

AP-7522

NPC

7P

PC

None

Socket Only w/ Photocell

Globe:

AP-0378

PLSM

PLLG

T3AC

T5AC

T3ACPR

T5ACPR

T3ACSR

T5ACSR

T3DS59

T5DS59

AP-0367

PLSM

PLLG

T3AC

T5AC

T3ACPR

T5ACPR

T3ACSR

T5ACSR

T3DS59

T5DS59

AP-7522

-

PLLG

T3AC

T5AC

-

-

-

-

T3DS

T3DS

Note: 59 refers to P59 Textured Black, others colors available

Polycarbonate Small

Polycarbonate Large

Type III Acrylic

Type V Acrylic

Type III Acrylic, Perforated Reflector

Type V Acrylic, Perforated Reflector

Type III Acrylic, Solid Reflector

Type V Acrylic, Solid Reflector

Type III Acrylic, Dark Sky, Color

Type V Acrylic, Dark Sky, Color

The Bristol Wall Mount Luminaires are available in metal halide, high pressure sodium, or LED and provide the look and charm of history. A unique modular electrical unit provides easy access for service. The Bristol Luminaire can be customized for a personalized style and requirement by selecting various options as indicated below.

Finial/Color:

AP-0378

BL59

ST59

SI59

FL59

AP-0367

BL59

ST59

SI59

FL59

AP-7522

BL59

ST59

SI59

FL59

Note: 59 refers to P59 Textured Black, others colors available

3” Ball, Color

Steeple, Color

Spire, Color

Fleur, Color

Ribs/Color:

AP-0378

T59

TO59

AP-0367

T59

TO59

AP-7522

T59

TO59

Tall, Color

Tall Open, Color

S59

SO59

S59

SO59

S59

SO59

Note: 59 refers to P59 Textured Black, others colors available

Short, Color

Short Open, Color

3” Ball Steeple Spire Fleur

Tall Tall Open Short Short Open

Note: 1. See Reference Section for available paint colors.

2. Mounting hardware not included.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-4d

12/9/16

LED Luminaire Retrofits

Bristol LED Retrofit Kit, Alum

Wattage

37W=37 Watt

57W=57 Watt

Voltage

AP-0655 - - -

UNV=120-277V

Photocell

Socket

NPC=None

7P=7-Pin Socket

Coating

PNC=Process No Color

P_ _=Paint

Bristol LED Retrofit Kit w/ Top Plate for

7-Pin, Alum

Photocell

Wattage

37W=37 Watt

57W=57 Watt

Voltage

AP-0657 - - -

UNV=120-277V

Socket

7P=7-Pin Socket

Coating

PNC=Process No Color

P_ _=Paint

Windsor LED Retrofit Kit, Alum

Wattage

AP-0658 -

37W=37 Watt

-

57W=57 Watt

Voltage

UNV=120-277V

-

Photocell

Socket

NPC=None

7P=7-Pin Socket

-

Coating

PNC=Process No Color

Renaissance LED Retrofit Kit, Alum

Wattage

AP-0656 -

80W=80 Watt

Voltage

-

120V=120 Volt

-

Photocell

NPC=None

Coating

-

PNC=Process No Color

Note: 1. For converting existing luminaires to LED.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/9/16

Page U6-4e

This page is intentionally left blank.

Page U6-4f www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/9/16

Brackets & Banding Light Shield

Light Shield, House Side

For Mogul Socket, 2-1/4” Dia

Alum

AP-8433-

Coating

PNC=Process No Color

P_ _=Paint

The aluminum light shield clamps onto the mogul base socket in the Bristol HID Luminaires preventing unwanted light encroachment.

Light Shield, Security

Alum

SP-6013-

Coating

PNC=Process No Color

P_ _=Paint

The aluminum baffle easily snaps onto most security lights preventing unwanted light encroachment.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

8/10/16

Page U6-5

Lighting Arms

45°

45°

Brackets & Banding

Lumi-Brac, 1-5/8” Dia Tenon

Adjustable View

2-3/8” OD Tenon Mount,

Alum

SP-6350 -

Coating

PNC= Process No Color

P_ _=Paint

6”

Note:

For mounting a single security light or Wi Fi antenna.

Lumi-Brac, 1-5/8” Dia Tenon

Adjustable View Cable Mount, Alum

6”

45°

45°

Cable

Length

Coating

SP-6351 - -

62=7” Max Pole Dia

84=10.5” Max Pole Dia

96=12.4” Max Pole Dia

110”=14.6” Max Pole Dia

120”=16.2” Max Pole Dia

132=18.2” Max Pole Dia

144=20.1” Max Pole Dia

220=32.2” Max Pole Dia

280=35.0” Max Pole Dia

PNC= Process No Color

P_ _=Paint

Note:

For mounting a single security light or Wi Fi antenna.

Stainless steel upgrade available: includes stainless cable.

Specify by including -SS in the part number, i.e., SP-6351-

62-SS-PNC.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-6

8/10/16

Lighting Arms

Mounting Bracket Assy,

Single Luminaire Arm,

Galvanized Steel

SP-6282-GLV

13.8”

14”

Grommet

Bullhorn mounting bracket with a 2-3/8” OD pipe for mounting a single luminaire security light. Mounts with an offset from the wood pole and includes rubber grommet on the underneath side for wiring.

Mounting Bracket Assy,

Double Luminaire Arms,

Galvanized Steel

SP-6308-GLV

13”

31”

13.8”

Grommet

Note: 1. Luminaire arms are hot dip galvanized per ASTM A123.

Bullhorn mounting bracket with a 2-3/8” OD pipe for mounting two luminaire security lights. Mounts with an offset from the wood pole and includes rubber grommet on the underneath side for wiring.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-7

Lighting Arms

Luminaire Support Arm, 1-5/8” OD

Galvanized Steel

SP-6272-GLV

25.5”

12”

11.5”

16.9”

24.9”

30.9”

Luminaire support arm with a 1-5/8” OD pipe for mounting a single security light or Wi Fi antenna.

Luminaire Mounting Arm, 1-5/8” OD w/ Mounting Hardware, Alum

Length Coating

SP-6348- -P40

16=16”

24=24”

30=30”

PNC=Process No Color

P_ _=Paint

1-5/8” OD aluminum pipe with an option of length for mounting a single security light. 16” and 24” for mouting the Skyhawk or small Trenton luminaire. 30” for mounting the Skyhawk only. Includes three 3/8”-16 x 3” hex head lag bolts and flat washers. Typically powder coated P40 Silver, other colors available.

Mounting Arm Assy, Flood Light,

2-3/8” OD, Galvanized Steel

23”

SP-6349-GLV

20.5”

Note: 1. Steel luminaire arms are hot dip galvanized per ASTM A123.

2. See Reference Section for available paint colors.

Mounting arm with a 2-3/8” OD pipe for mounting a single flood light with the provided 3/4”-10NC hardware.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-8

12/9/16

Lighting Arms

Luminaire Mounting Arm, 2-3/8” OD

54” Rise, Galvanized Steel

SP-6309-

Coating

GLV=Galvanized

P_ _=Paint

For mouting a single luminaire on 2-3/8” OD x 6’ schedule

10 pipe with a 54” rise. Mounting hardware not included.

Galvanized or powder coated.

Luminaire Arm, Clamp-on, 2-3/8” Dia Tenon,

30” Rise, Galv Steel

AP-3001-

Arm Length

72=6’

96=8’

120=10’

144=12’

-

Coating

GLV=Galvanized

P_ _=Paint for 4”-5”

Dia Pole

AP-3002-

Arm Length

-

Coating

96=8’

120=10’

144=12’

180=15’

GLV=Galvanized

P_ _=Paint

For mounting a single luminaire onto the 2-3/8” dia x 8” long tenon. Includes 1/2”-13NC hardware for attaching arm to the pole.

Galvanized or powder coated.

for 5-1/2” to 7-1/2”

Dia Pole

Note: 1.Steel luminaire arms are hot dip galvanized per ASTM A123.

2. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/9/16

Page U6-9

Arms, Column, & Wall Mounts

Twin Arm Assy, Alum w/ 3-1/2” Luminaire Tenons,

33” CTC

Fits 2-7/8” Pole Tenon

Finial/Color

AP-8203- -

BL_ _=2” Ball

Paint

P_ _=Paint

SI_ _=Spire

SE_ _=Steeple

FL_ _=Fleur

2” Ball Steeple Spire Fleur

Pelco’s twin arm can be mounted to a fluted or tapered pole. The twin arm can accommodate the Bristol, Windsor, or Newport luminaires and are available with a variety of finials to complement the luminaire.

Twin Arm Assy, Alum w/ 3-1/2” Luminaire Tenons,

35” CTC

Fits 2-7/8” Pole Tenon

Finial/Color

AP-8374- -

BL_ _=2” Ball

Paint

P_ _=Paint

SI_ _=Spire

SE_ _=Steeple

FL_ _=Fleur

Pelco’s straight twin arm can be mounted to a fluted or tapered pole. The twin arm can accommodate the Bristol,

Windsor, or Newport luminaires and are available with a variety of finials to complement the luminaire.

2” Ball Steeple Spire Fleur

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-10

4/7/15

Arms, Columns, & Wall Mounts

Wall Mount Arm Assy, Alum

16-1/2” Offset from Wall

Tenon

AP-8230-

2.8=2-13/16” OD

3.5=3-1/2” OD

-

Finial/Color

BL_ _=2” Ball

SI_ _=Spire

SE_ _=Steeple

FL_ _=Fleur

Paint

-

P_ _=Paint

2” Ball Steeple Spire Fleur

Pelco’s single arm is designed to mount to a wall or flat surface and can accommodate the Bristol, Windsor, or

Newport luminaires. Available with a variety of finials to complement the luminaire.

Column Mount, Alum w/ 3-1/2” Luminaire Tenon

8-1/2” Bolt Circle for 1/2” Hardware

AP-8195-

Collar

Blank=No Collar

OC=Ornamental

Collar

Paint

-

P_ _=Paint

Pelco’s decorative Column Mount can accommodate the

Bristol, Windsor, or Newport luminaires and is available with an optional collar for additional ornamentation.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-11

This page is intentionally left blank.

Page U6-12 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Light Pole, 3-1/2” OD

Steel w/ Hand Hole

AP-0220-

Height

05=5’

08=8’

10=10’

12=12’

14=14’

Coating

-

P_ _=Paint

2.38” x 3.5”

Hand Hole

10”

5.5”-6.5”

Bolt Circle

5.63”

Post Top Luminaire Poles

Light Pole, 3-1/2” OD

Steel w/ GFCI Option

Height

AP-0376- -

05=5’

08=8’

10=10’

GFCI

Blank=w/o Kit

GFCI=w/ Kit

12=12’

14=14’

Coating

-

P_ _=Paint

GFCI

Housing

29.5”

5.5”-6.5”

Bolt Circle

5.63”

ABS Bases: Anchors:

AP-0804

Old Towne I

Aluminum Bases:

AP-0801

Old

Towne I

AP-0807

Old

Towne II

AP-0803

Rochester

AP-0814

LeGrande

AP-0810

Hamilton

AP-1046-GLV

Anchor Bolts

Set, 1/2”-13NC

AP-1049-GLV

Anchor Bolt Cage,

1/2”-13NC

AP-0811

Country

Club

AP-0820

Huntington

PB-5416

Octagonal

AP-0817

Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-13

Post Top Luminaire Poles

Light Pole, 3-1/2” OD Steel w/ Lower GFCI Option

Height

AP-0302-

05=5’

08=8’

10=10’

12=12’

14=14’

GFCI

-

Blank=w/o Kit

Coating

-

P_ _=Paint

GFCI=w/ Kit

GFCI

Housing

5.1”

5.5”-6.5”

Bolt Circle

5.63”

ABS Bases:

AP-0803

Rochester I

AP-0810

Hamilton

Anchors:

AP-1046-GLV

Anchor Bolts

Set, 1/2”-13NC

AP-1049-GLV

Anchor Bolt Cage,

1/2”-13NC

Aluminum Bases:

AP-0807

Old Towne II

AP-0811

Country

Club

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-14

4/7/15

Post Top Luminaire Poles

Light Pole, 3” Fluted, Alum w/ 3-1/2” x 3” Long Tenon

2” x 4” Hand Hole

Height

AP-8119 -

10=10’

12=12’

14=14’

Coating

-

P_ _=Paint

2” x 4”

Hand Hole

18.5”

7.75”-9.75”

Bolt Circle

8.64”

ABS Bases: Anchors:

AP-0809

Rochester II

Aluminum Bases:

AP-0814

LeGrande

AP-0803

Rochester I

AP-0811

Country

Club

AP-0810

Hamilton

AP-1019-GLV

Anchor Bolts

Set, 3/4”-10NC

AP-1089-GLV

Anchor Bolt Cage,

3/4”-10NC

AP-0816

Hamilton

PB-5416

Octagonal

AP-0817

Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-15

Post Top Luminaire Poles

Light Pole, 4” Fluted, Alum w/ 3-1/2” OD x 2-7/8” Tenon, 2” x

4” Hand Hole, Ground Lug

Height

AP-8122-

10=10’

12=12’

14=14’

Coating

-

P_ _=Paint

2” x 4”

Hand Hole

7.88”-13”

Bolt Circle

7.5”

12.5”

Light Pole, 4” Fluted, Alum w/ 3-1/2” OD x 2-7/8” Tenon,

2” x 4” Hand Hole, Ground Lug

Height

AP-8468-

15=15’

18=18’

20=20’

Coating

-

P_ _=Paint

2” x 4”

Hand Hole

7.88”-13”

Bolt Circle

7.5”

12.5”

ABS Bases:

AP-0809

Rochester II

AP-0810

Hamilton

Aluminum Bases:

AP-0814

LeGrande

AP-0819

Manchester

Anchors:

AP-1019-GLV

Anchor Bolts

Set, 3/4”-10NC

AP-1089-GLV

Anchor Bolt Cage,

3/4”-10NC

AP-0816

Hamilton

PB-5414

Octagonal

AP-0817

Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-16

12/9/16

Post Top Luminaire Poles

Light Pole, Fluted Tapered, Steel w/ 3-1/2” OD x 3-1/2” Tenon, GFCI Option

Height

AP-8700-

8=8’

10=10’

GFCI

-

Blank=w/o Kit

Coating

-

GLV=Galvanized

GFCI=w/ Kit P_ _=Paint

3” x 5”

Hand Hole

5.08”

8.5”-10.5”

Bolt Circle

10”

ABS Bases:

AP-0809-5.63-13.13

Rochester II

Anchors:

AP-0810-5.81-13.13

Hamilton

AP-1019-GLV

Anchor Bolts

Set, 3/4”-10NC

AP-1089-GLV

Anchor Bolt Cage,

3/4”-10NC

Aluminum Bases:

AP-0814-5.63

LeGrande

AP-0819-5.75

Manchester

AP-0816-5.75

Hamilton

AP-0817-6F

Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-17

Post Top Luminaire Poles

Ground

Level

Direct Bury Light Pole, Tapered Steel

11 Gauge, 5.8” Butt x 19’ Tall

3-1/2” OD x 3” Long Tenon, w/ Hand Hole Cover & Grounding Lug

Coating

AP-3056-

P_ _=Paint

Ground

Level

4” x 6”

Hand Hole w/ Cover

18”

48” Embed

ABS Bases:

AP-0809-4.88-5.63

Rochester II

AP-0803-4.88-5.63

Rochester I

5.8” Butt Dia

AP-0817-5.25

Oxford

Aluminum Bases:

AP-0814-4.88

LeGrande

AP-0811-5.00

Country Club

AP-0819-5.00

Manchester

AP-0816-5.00

Hamilton

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-18

4/7/15

Post Top Luminaire Poles

Direct Bury Light Pole, Tapered Steel

11 Gauge, 7.5” Butt x 25’ Tall

3-1/2” OD x 3” Long Tenon, w/ Hand Hole Cover & Grounding Lug

Coating

AP-3057-

P_ _=Paint

Ground

Level

4” x 6”

Hand Hole w/ Cover

18”

48” Embed

7.5” Butt Dia

ABS Bases:

AP-0809-6.56-7.25

Rochester II

Ground

Level

Aluminum Bases:

AP-0802-6.63

Ornamental

AP-0819-6.75

Manchester

AP-0816-6.75

Hamilton AP-0817-6.88

Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-19

Majestic Roadway Poles

Pole

Height

30’-0”

Arm

Length

6’-0”

8’-0”

Arm

Single

Single

Part

Number

AP-8327

AP-8347

Allowable EPA

(ft^2) per arm at

90 mph with max. luminaire weight of

60 lbs

7.0

4.6

Allowable EPA

(ft^2) per arm at

100 mph with max. luminaire weight of

60 lbs

5.6

3.6

Note:

Majestic Poles come standard with Hamilton Base, for optional Hamilton Base w/ Riser specify by adding -BR in the part number, i.e., AP-8327-BR-P59

EPA=Projected area of luminaire multiplied by coefficient of drag

Compliant with AASHTO 2013

Anchors:

3” x 5”

Hand Hole w/Cover

11”-12”

Bolt Circle

15”

12”

19.5” to

Flutes

AP-1007-3-GLV

Anchor Bolts

Set, 1”-8NC

AP-3129-GLV

Anchor Bolt Cage,

1”-8NC

PB-5372-GLV

6” Foundation

Anchor

AP-0816-7.75

Hamilton

(Standard)

AP-0823-7.75

Hamilton w/ Riser

(Optional)

The Majestic Roadway Lighting Poles are available for single or twin luminaires and with 6’ or 8’ arms fabricated with a 29” rise. The fluted tapered steel pole offers great strength and durability, with the Hamilton base completing the classic decorative look.

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-20

12/21/16

Majestic Roadway Poles

Pole

Height

Arm

Length

Arm

Part

Number

Allowable EPA

(ft^2) per arm at

90 mph with max. luminaire weight of

60 lbs

7.0

Allowable EPA

(ft^2) per arm at

100 mph with max. luminaire weight of

60 lbs

5.6

30’-0”

6’-0”

8’-0”

Single

Single

AP-8328

AP-8348 4.6

3.6

Note:

Majestic Poles come standard with Hamilton Base, for optional Hamilton Base w/ Riser specify by adding -BR in the part number, i.e., AP-8347-BR-P59

EPA=Projected area of luminaire multiplied by coefficient of drag

Compliant with AASHTO 2013

Anchors:

3” x 5”

Hand Hole w/Cover

11”-12”

Bolt Circle

15”

12”

19.5” to

Flutes

AP-1007-3-GLV

Anchor Bolts

Set, 1”-8NC

AP-3129-GLV

Anchor Bolt Cage,

1”-8NC

PB-5372-GLV

6” Foundation

Anchor

AP-0816-7.75

Hamilton

(Standard)

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/21/16

AP-0823-7.75

Hamilton w/ Riser

(Optional)

Page U6-21

Traditional Roadway Poles

Pole

Height

22’-6”

25’-0”

30’-0”

Arm

Length

8’-0”

8’-0”

8’-0”

Arm

Single

Single

Single

Part

Number

AP-8489

AP-8556

AP-8301

Allowable EPA

(ft^2) per arm at

90 mph with max. luminaire weight of

60 lbs

5.0

4.8

4.6

Allowable EPA

(ft^2) per arm at

100 mph with max. luminaire weight of

60 lbs

3.9

3.8

3.6

Note:

Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8301-BC-P59

EPA=Projected area of luminaire multiplied by coefficient of drag

Compliant with AASHTO 2013

3” x 5”

Hand Hole w/ Cover

11”-12”

Bolt Circle

15”

12”

Anchors:

Aluminum Bases:

AP-1007-3-GLV

Anchor Bolts

Set, 1”-8NC

AP-3129-GLV

Anchor Bolt Cage,

1”-8NC

PB-5372-GLV

6” Foundation

Anchor

PB-5384-7.69

Rochester

AP-0802-7.75

Ornamental

AP-0816-7.75

Hamilton

AP-0817-8.00

Oxford

The Traditional Roadway Luminaire Poles are available in 30’ and 22-1/2’ heights with 8’ arms fabricated with a

26” rise. The steel tapered poles offer an affordable graceful look and can accept a variety of decorative bases or be provided with simple nut covers.

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-22

12/21/16

Traditional Roadway Poles

Pole

Height

22’-6”

25’-0”

30’-0”

Arm

Length

8’-0”

8’-0”

8’-0”

Arm

Twin

Twin

Twin

Part

Number

AP-8490

AP-8563

AP-8302

Allowable EPA

(ft^2) per arm at

90 mph with max. luminaire weight of

60 lbs

5.0

4.8

4.6

Allowable EPA

(ft^2) per arm at

100 mph with max. luminaire weight of

60 lbs

3.9

3.8

3.6

Note:

Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8302-BC-P59

EPA=Projected area of luminaire multiplied by coefficient of drag

Compliant with AASHTO 2013

3” x 5”

Hand Hole w/ Cover

11”-12”

Bolt Circle

15”

12”

Anchors:

Aluminum Bases:

PB-5384-7.69

Rochester

AP-1007-3-GLV

Anchor Bolts

Set, 1”-8NC

AP-3129-GLV

Anchor Bolt Cage,

1”-8NC

PB-5372-GLV

6” Foundation

Anchor

AP-0802-7.75

Ornamental

AP-0816-7.75

Hamilton

AP-0817-8.00

Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/21/16

Page U6-23

Simplex Roadway Poles

3” x 5”

Hand Hole w/ Cover

11”-12” BC

(25’ & 30’ Poles)

12”-13” BC

(35’ & 40’ Poles)

15”

12”

(25’ & 30’ Poles)

13”

(35’ & 40’ Poles)

Aluminum Bases:

Pole

Height

25’

30’

35’

40’

Base

ID

7.25”

8.13”

8.13”

8.63”

Pole

Height

25’-0”

30’-0”

35’-0”

40’-0”

Arm

Length

6’-0”

8’-0”

6’-0”

8’-0”

6’-0”

8’-0”

6’-0”

8’-0”

Arm

Single

Single

Single

Single

Single

Single

Single

Single

Part

Number

AP-8571-25-6

AP-8571-25-8

AP-8571-30-6

AP-8571-30-8

AP-8571-35-6

AP-8571-35-8

AP-8571-40-6

AP-8571-40-8

Allowable EPA

(ft^2) per arm at

90 mph with max. luminaire weight of

60 lbs

6.8

4.1

6.1

4.0

4.5

6.5

4.3

6.3

Note:

Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8571-30-6-BC-GLV.

EPA=Projected area of luminaire multiplied by coefficient of drag

Compliant with AASHTO 2013

Allowable EPA

(ft^2) per arm at

100 mph with max. luminaire weight of

60 lbs

5.4

3.2

4.8

3.1

3.5

5.2

3.3

5.0

Anchors:

AP-1007-3-GLV

1”-8NC

(25’ & 30’ Poles)

AP-1020-GLV

1-1/4”-7NC

(35’ & 40’ Poles)

Pole

Height

25’

30’

35’

40’

Base

ID

7.25”

8.25”

8.25”

8.75”

AP-3129-GLV

1”-8NC

(25’ & 30’ Poles)

AP-3146-GLV

1-1/4”-7NC

(35’ & 40’ Poles)

PB-5372-GLV

6” Foundation

Anchor

(25’, 30’, 35’, & 40’ Poles)

Pole

Height

25’

30’

35’

40’

Base

ID

7.31”

7.88”

N/A

N/A

Pole

Height

25’

30’

35’

40’

Base

ID

7.50”

8.44”

8.44”

9.00”

PB-5384 Rochester

AP-0802 Ornamental

AP-0816 Hamilton AP-0817 Oxford

The Simplex Roadway Luminaire Poles are available in 25’, 30’, 35’, and 40’ heights. They are provided with either 6’ or 8’ single or twin arms fabricated with a 24” rise. The steel tapered poles can accept a variety of decorative bases or be provided with simple nut covers. Various anchor options are also available.

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-24

12/21/16

Simplex Roadway Poles

3” x 5”

Hand Hole w/ Cover

Pole

Height

25’-0”

30’-0”

35’-0”

40’-0”

Arm

Length

6’-0”

8’-0”

6’-0”

8’-0”

6’-0”

8’-0”

6’-0”

8’-0”

Arm

Twin

Twin

Twin

Twin

Twin

Twin

Twin

Twin

Part

Number

AP-8572-25-6

AP-8572-25-8

AP-8572-30-6

AP-8572-30-8

AP-8572-35-6

AP-8572-35-8

AP-8572-40-6

AP-8572-40-8

Allowable EPA

(ft^2) per arm at

90 mph with max. luminaire weight of

60 lbs

6.8

4.1

6.1

4.0

4.5

6.5

4.3

6.3

Note:

Bolt/Nut Covers are available by specifying -BC in the part number, i.e., AP-8572-30-6-BC-GLV.

EPA=Projected area of luminaire multiplied by coefficient of drag

Compliant with AASHTO 2013

Allowable EPA

(ft^2) per arm at

100 mph with max. luminaire weight of

60 lbs

5.4

3.2

4.8

3.1

3.5

5.2

3.3

5.0

Anchors:

11”-12” BC

(25’ & 30’ Poles)

12”-13” BC

(35’ & 40’ Poles)

15”

12”

(25’ & 30’ Poles)

13”

(35’ & 40’ Poles)

Aluminum Bases:

Pole

Height

25’

30’

35’

40’

Base

ID

7.25”

8.13”

8.13”

8.63”

AP-1007-3-GLV

1”-8NC

(25’ & 30’ Poles)

AP-1020-GLV

1-1/4”-7NC

(35’ & 40’ Poles)

Pole

Height

25’

30’

35’

40’

Base

ID

7.25”

8.25”

8.25”

8.75”

AP-3129-GLV

1”-8NC

(25’ & 30’ Poles)

AP-3146-GLV

1-1/4”-7NC

(35’ & 40’ Poles)

PB-5372-GLV

6” Foundation

Anchor

(25’, 30’, 35’, & 40’ Poles)

Pole

Height

25’

30’

35’

40’

Base

ID

7.31”

7.88”

N/A

N/A

Pole

Height

25’

30’

35’

40’

Base

ID

7.50”

8.44”

8.44”

9.00”

PB-5384 Rochester

AP-0802 Ornamental

AP-0816 Hamilton AP-0817 Oxford

Note: 1. See Reference Section for available paint colors.

2. For more indepth information on Bases see page U6-25 through U6-29.

3. For Anchors see section U5.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

12/21/16

Page U6-24a

This page is intentionally left blank.

Page U6-24b www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

ABS Plastic Bases

Old Town I Base Assy, Black ABS Plastic

25” High x 9-1/4” Points

Top ID

AP-0804 -

3.5=3-1/2”

-

Bottom ID

7.5=7-1/2”

- PNC

Note: Top Opening: 3-1/2” max

Bottom Opening: 7-1/2” max

Rochester I Base Assy, Black ABS Plastic

41” High x 15-11/16” Across Points

Top ID

AP-0803 -

5.75=5-3/4”

Bottom ID

-

12.0=12”

- PNC

Note: Top Opening: 5-3/4” max

Bottom Opening: 12” max

Rochester II Base Assy, Black ABS Plastic

41” High x 19” Across Points

Top ID

AP-0809 -

9.0=9”

-

Bottom ID

15.0=15”

- PNC

Note: Top Opening: 9” max

Bottom Opening: 15” max

Hamilton Base Assy, Black ABS Plastic

21” High x 16-1/8” Base Dia

Top ID

AP-0810 -

6.5= 6-1/2”

-

Bottom ID

- PNC

14.5= 14-1/2”

Note: Top Opening: 6-1/2” max

Bottom Opening: 14-1/2” max

Note: 1. Refer to individual pole pages for cross reference for proper fit of base and pole.

2. ABS Plastic Bases are manufactured from an ultraviolet inhibited material that provides protections against U.V. degradation

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-25

Aluminum Bases

Old Town I Base Assy, Alum

23-1/2” High x 9-1/4” Across Points

Base ID

AP-0801 -

2.38=2-3/8”

2.88”=2-7/8”

3.5=3-1/2”

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 2-3/8” min to 3-1/2” max

Bottom Opening: 7-1/2” max

Old Town II Base Assy w/ Riser, Alum

28-1/2” High x 14-5/8” Across Points

Base ID

AP-0807 -

2.38=2-3/8”

2.88”=2-7/8”

3.5=3-1/2”

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 2-3/8” min to 3-1/2” max

Bottom Opening: 13” max

Country Club Base Assy, Alum

28” High x 13-5/8” OD

Base ID

AP-0811 -

3.5=3-1/2”

4.5=4-1/2”

3F= 3” Fluted

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 3-1/2” min to 4-1/2” max

Bottom Opening: 12” max

Oxford Base Assy, Alum

9” High x 19-1/4” Across Points

Base ID

AP-0817 -

8.5= 8-1/2”

4F=4” Fluted

6F=6” Fluted

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 3-1/2” min to 8-1/2” max

Bottom Opening: 17” max

Note: 1. See Reference Section for available paint colors.

2. Refer to individual pole pages for cross reference for proper fit of base and pole.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-26

4/7/15

Aluminum Bases

Huntington Base Assy, Alum

15-3/4” High x 11-1/4” OD

Base ID

AP-0820 -

3.5=3-1/2”

4.0=4”

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 3” min to 4” max

Bottom Opening: 10-3/4” max

Manchester Base Assy w/ Door, Alum

27” High x 18-1/2” OD

Base ID

AP-0819 -

4.0=4”

7.0=7”

4F=4” Fluted

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 3” min to 4” max

Bottom Opening: 7” max

LeGrande Base Assy, Alum

38” High x 18-1/2” OD

AP-0814 -

Base ID

3.5=3-1/2”

4.5=4-1/2”

5.5=5-1/2”

3F= 3” Fluted

4F=4” Fluted

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 3-1/2” min to 5-3/4” max

Bottom Opening: 17” max

Note: 1. See Reference Section for available paint colors.

2. Refer to individual pole pages for cross reference for proper fit of base and pole.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-27

Aluminum Bases

Hamilton Base Assy, Alum

24” High x 18-1/2” OD

Base ID Coating

AP-0816 - -

4.06=4-1/16”

4.5=4-1/2”

5.5=5-1/2”

8.5=8-1/2” (max)

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 4” min to 8-1/2” max

Bottom Opening: 16-3/4” max

Hamilton Base Assy, Alum

31-1/4” High x 18-1/2” OD

Base ID

AP-0823 -

4.06=4-1/16”

-

Coating

4.5=4-1/2”

5.5=5-1/2”

8.5=8-1/2” (max)

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 4” min to 8-1/2” max

Bottom Opening: 16-3/4” max

Octagonal Base Assy, Alum

14-3/16” High x 17-13/16” Across Points

Base ID

2.88=2-7/8”

Coating

PB-5416 - -

PNC=Process No Color

3.5=3-1/2”

4=4”

P_ _=Paint

4.5=4-1/2”

5= 5”

Note: Top Opening: 2-7/8” min to 5” max

Bottom Opening: 16” max

Octagonal Base Assy, for 4” Fluted Pole, Alum

14” High x 17-13/16” Across Points

Coating

PB-5414 -

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 4” Fluted Only

Bottom Opening: 16” max

Note: 1. See Reference Section for available paint colors.

2. Refer to individual pole pages for cross reference for proper fit of base and pole.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-28

4/7/15

Aluminum Bases

Rochester Base Assy, Alum

36” High x 28” Across Points

Base ID

PB-5384 -

8.0=8”

10.63=10-5/8”

14.13=14-1/8”

16”= 16”

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 8” min to 16” max

Bottom Opening: 26” max

Ornamental Base Assy, Alum

32” High x 28-3/4” Across Points

Base ID

AP-0802 -

8.0=8”

10.0=10”

12.0= 12”

Trim

- -

T_ _=Trim Color

Coating

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 6” min to 12” max

Bottom Opening: 23” max

Square Cover Assy, 2-Piece, Alum

5-1/4” High x 16” Square

PB-5399 -

Base ID

4.5=4-1/2”

6.8=6-13/16”

7.5=7-1/2”

8.0=8-1/2”

Coating

-

PNC=Process No Color

P_ _=Paint

Note: Top Opening: 4-1/2” min to 8-5/8” max

Bottom Opening: 15” max

Note: 1. See Reference Section for available paint colors.

2. Refer to individual pole pages for cross reference for proper fit of base and pole.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-29

This page is intentionally left blank.

Page U6-30 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Banner Brackets

3” Ball Steeple Spire Fleur Spear

Banner Mounting Bracket, Alum

Hinged Single Arm,

Pole Dia

SH-3551 -

2.38=2-3/8”

2.88=2-7/8”

3.50=3-1/2”

4.06=3” Fluted

4.50=4-1/2”

5.08=4” Fluted

5.56=5-9/16”

-

Banner Width

-

18=18”

24=24”

30=30”

36=36”

Finial/Color

-

Coating

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

FL_ _=Fleur

SE_ _=1-1/2” Spear

P_ _=Paint

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

3” Ball Steeple Spire Fleur Spear

Banner Mounting Bracket, Alum

Hinged Articulating Single Arm

Pole Dia

SH-3547 -

2.38=2-3/8”

2.88=2-7/8”

3.50=3-1/2”

4.06=3” Fluted

4.50=4-1/2”

5.08=4” Fluted

5.56=5-9/16”

-

Banner Width

-

18=18”

24=24”

30=30”

36=36”

Finial/Color

-

Coating

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

FL_ _=Fleur

SE_ _=1-1/2” Spear

P_ _=Paint

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

3” Ball Steeple Spire Fleur Spear

Note: 1. See Reference Section for available paint colors.

Banner Mounting Bracket, Alum

Hinged Double Arm

SH-3556 -

Pole Dia

2.38=2-3/8”

2.88=2-7/8”

3.50=3-1/2”

4.06=3” Fluted

4.50=4-1/2”

5.08=4” Fluted

5.56=5-9/16”

-

Banner Width

18=18”

24=24”

30=30”

36=36”

-

Banner Width

18=18”

20=21”

24=24”

30=30”

36=36”

-

Finial/Color Coating

-

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

P_ _=Paint

FL_ _=Fleur

SE_ _=1-1/2” Spear

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-31

Banner Brackets

3” Ball Steeple Spire Fleur Spear

Banner Mounting Bracket, Alum

Band Mini-Brac

Banner Width

SH-3520 -

18=18”

24=24”

30=30”

36=36”

BandLength/Painted

- -

29=29”

42=42”

29PB=29” Painted

42PB=42” Painted

Finial/Color

-

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

FL_ _=Fleur

SE_ _=1-1/2” Spear

Coating

P_ _=Paint

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

Banner Mounting Bracket, Alum

Band Mini-Brac, Articulating Arm

3” Ball Steeple Spire Fleur Spear

Banner Width

SH-3525 -

18=18”

24=24”

30=30”

36=36”

BandLength/Painted

- -

29=29”

42=42”

29PB=29” Painted

42PB=42” Painted

Finial/Color

-

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

FL_ _=Fleur

SE_ _=1-1/2” Spear

Coating

P_ _=Paint

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-32

4/7/15

Banner Brackets

3” Ball Steeple Spire Fleur Spear

Banner Mounting Bracket, Alum

Universal Hub Mount

Banner Width

SH-3523 -

18=18”

24=24”

30=30”

36=36”

Finial/Color

- -

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

FL_ _=Fleur

SE_ _=1-1/2” Spear

Coating

P_ _=Paint

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

Banner Mounting Bracket, Alum

For Square Poles, Articulating Arm

3” Ball Steeple Spire Fleur Spear

SH-3532 -

Pole Size

-

Banner Width

-

4=4” Square

5=2-7/8” Square

6.63=6-5/8” Square

18=18”

24=24”

30=30”

36=36”

Finial/Color Coating

-

BL_ _=2” Ball

ST_ _=Steeple

SI_ _=Spire

FL_ _=Fleur

SE_ _=1-1/2” Spear

P_ _=Paint

Note:

Shown with ball finial. Finial may be ordered as P28 Gold or same color as assembly.

Pelco has a wide variety of mounting bracket for banners and flags. Choose from ornamental hubs, banded mini-bracs, or flat mounted hubs. Banner bracs for square poles are also available, as well as articulating arms for collapsing against the pole.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-33

Flag Mounts

Flag Mount, Hinged Articulating Serrated,

Alum

Pole Dia Coating

SH-3549 - -

2.88=2-7/8”

3.50=3-1/2”

4.06=3” Fluted

4.50=4-1/2”

5.08=4” Fluted

5.56=5-9/16”

P_ _=Paint

Flag Mount, 2-Way Articulating Serrated,

Alum

Pole Dia

SH-3561 - -

2.88=2-7/8”

3.50=3-1/2”

4.06=3” Fluted

4.50=4-1/2”

5.08=4” Fluted

5.56=5-9/16”

Coating

P_ _=Paint

Flag Mount, Articulating Serrrated, Alum

Band Mini-Brac

BandLength/Painted

SH-3539 - -

29=29”

42=42”

29PB=29” Painted

42PB=42” Painted

Coating

P_ _=Paint

Flag Mount w/ Articulating Serated, Alum

Universal Hub

SH-3538 -

Coating

P_ _=Paint

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U6-34

4/7/15

3” Ball Steeple Spire Fleur Spear

Pole Accessories

Flag Rod Assy, Alum

AP-7380 -

Rod Length

-

Finial/Color Coating

-

42=42”

52=52”

BL_ _=2” Ball

SE_ _=1-1/2” Spear

P_ _=Paint

SI_ _=Spire

ST_ _=Steeple

FL_ _=Fleur

Note:

Shown with steeple finial. Finial may be ordered as P28 Gold or same color as assembly.

Break-a-way Coupler, 1”-8NC, Alum

For Banner Bracs

AP-7239 -

Coating

P_ _=Paint

Pelco’s Break-a-way Coupler can be mounted on any 1” banner rod for collapsing against the pole.

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U6-35

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents