advertisement
GXP2130/2135/2140/2160/2170 Firmware Release Note
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to
1.0.5.x firmware version or lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9
firmware version or lower is not supported.
This release adds Predictive Dialing feature which included a required internal
change. If you downgrade from 1.0.8.47 to 1.0.7.25 you will lose the call history.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 1
Table of Content
IMPORTANT UPGRADING NOTE ............................................................. 1
FIRMWARE VERSION 1.0.8.47 ............................................................... 13
FIRMWARE VERSION 1.0.8.46 ............................................................... 16
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 2
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 3
DISABLING LOCAL CALL FORWARDING RULES ENHANCEMENT ........................................ 61
FIRMWARE VERSION 1.0.7.97 ............................................................... 64
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 4
SUPPORT OF CONFIGURABLE HTTP/HTTPS WEB PORT ..................................................... 68
FIRMWARE VERSION 1.0.7.81 ............................................................... 86
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 5
MULTIPLE NUMBERS AND OTHER INFO FOR ONE CONTACT SUPPORT IN
SEARCH FROM BROADSOFT DIRECTORIES SUPPORT ..................................................... 104
FIRMWARE VERSION 1.0.7.25 ............................................................. 106
CONFIGURE BROADSOFT XSI SIP AUTHENTICATION METHOD ........................................ 110
ENABLE/DISABLE AUTO LOCATION SERVICE FROM IpVideoTalk SERVER ....................... 113
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 6
SUPPORT FOR IEEE-48-ADDR AND IEEE-EUI-64 IN PEI HEADER ...................................... 132
SUPPORT FOR POPULATING THE WAN ACCESS NODE IN SIP ......................................... 133
FIRMWARE VERSION 1.0.7.15 ............................................................. 139
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 7
BLIND TRANSFER AND ATTENDED TRANSFER SOFTKEY .................................................. 173
FIRMWARE VERSION 1.0.6.9 ............................................................... 175
FIRMWARE VERSION 1.0.6.5 ............................................................... 176
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 8
FIRMWARE VERSION 1.0.5.33 ............................................................. 178
FIRMWARE VERSION 1.0.5.29 ............................................................. 179
FIRMWARE VERSION 1.0.5.28 ............................................................. 180
FIRMWARE VERSION 1.0.5.23 ............................................................. 181
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 9
FIRMWARE VERSION 1.0.5.18 ............................................................. 182
FIRMWARE VERSION 1.0.4.23 ............................................................. 185
FIRMWARE VERSION 1.0.4.17 ............................................................. 188
FIRMWARE VERSION 1.0.4.16 ............................................................. 189
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 10
FIRMWARE VERSION 1.0.4.15 ............................................................. 190
FIRMWARE VERSION 1.0.4.10 ............................................................. 192
FIRMWARE VERSION 1.0.4.6 ............................................................... 193
FIRMWARE VERSION 1.0.4.5 ............................................................... 194
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 11
FIRMWARE VERSION 1.0.3.9 ............................................................... 198
FIRMWARE VERSION 1.0.2.9 ............................................................... 202
FIRMWARE VERSION 1.0.1.14 ............................................................. 205
FIRMWARE VERSION 1.0.1.6 ............................................................... 206
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 12
FIRMWARE VERSION 1.0.8.47
PRODUCT NAME
GXP2130, GXP2135, GXP2140, GXP2160 and GXP2170
DATE
04/17/2017
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware
version or lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version
or lower is not supported.
This release restored the Weather service. Part of the change requires users who are
using
“Self-Defined City Code” to change their setting. The upstream content provider has changed the API to yield a free-style search based on this argument instead of mapping to a specific code being used before. Hence the city being displayed would have been
incorrect. These users should change this option to the name of the city, for instance：
“Dallas”; “Dallas, NC”; “Dallas, Scotland”; “Liverpool”; “Liverpool, NY”; “Liverpool, England”.
Note:
If you enter only the name of the city it’s going to go the best match. In the case of Dallas it would be Dallas, TX; and in the case of the Liverpool it would be Liverpool, England.
This release adds Predictive Dialing feature which included a required internal change. If you
downgrade from 1.0.8.47 to 1.0.7.25 you will lose the call history.
ENHANCEMENT
Added Ability to customize the domain name on the XSI request [CUSTOMIZE DOMAIN NAME OF
BUG FIX
Fixed Device with Line Key Sync still handles Call Forward No Answer if incoming call from BroadSoft
Hunt Group
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 13
NEW FEATURES OVERVIEW
This section lists major new featu res and describes how to use it from the user’s point of view.
CUSTOMIZE DOMAIN NAME OF THE XSI REQUEST
Web Configuration
This option can be found under device web UI Settings Broadsoft Broadsoft XSI XSI Actions
Path.
Functionality
Allowing Users to configure the deployment path for Broadsoft XSI Actions. If it is empty, the path
"com.broadsoft.xsi-actions" will be used.
-Steps to verify:
Step 1: Access to Web GUI > Settings > Broadsoft XSI.
Step 2: Configure XSI credentials (server, user ID, password, authentication type).
Step 3: Set new field "Action Path" to "nl.whereiam.xsi-actions" then save the settings.
Step 4: From phone's LCD, access BS directories and check wireshark trace.
- Actual expected results:
The phone sends request to BS server using "action path" as configured http://xsp1.iop1.broadworks.net:80/nl.whereiam.xsi-actions/v2.0/user/1356/directories/groupcommon
New Pvalue
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 14
Pvalue Description Value Range
P2937 <New Pvalue>
XSI Actions Path
String
Default
Null
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 15
FIRMWARE VERSION 1.0.8.46
PRODUCT NAME
GXP2130, GXP2135, GXP2140, GXP2160 and GXP2170
DATE
04/06/2017
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware
version or lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version
or lower is not supported.
This release restored the Weather service. Part of the change requires users who are
using
“Self-Defined City Code” to change their setting. The upstream content provider has changed the API to yield a free-style search based on this argument instead of mapping to a specific code being used before. Hence the city being displayed would have been
incorrect. These users should change this option to the name of the city, for instance：
“Dallas”; “Dallas, NC”; “Dallas, Scotland”; “Liverpool”; “Liverpool, NY”; “Liverpool, England”.
Note: If you enter only the name of the cit y it’s going to go the best match. In the case of Dallas it would be Dallas, TX; and in the case of the Liverpool it would be Liverpool, England.
This release adds Predictive Dialing feature which included a required internal change. If you
downgrade from 1.0.8.46 to 1.0.7.25 you will lose the call history.
ENHANCEMENT
Added Option to Show/Hide VPK label on call screen [SHOW/HIDE VPK LABEL ON CALL SCREEN]
Added Option to disable and enable the notification popup window for the missed call [MISSED CALL
Added Option to Sync Extension Board Backlight with LCD [SYNC EXT BOARD BACKLIGHT WITH
Allowed Certificate upload for OpenVPN [CERTIFICATE UPLOAD FOR OPENVPN]
Added Support of PAI update for CallPark VPK/MPK [PAI UPDATE FOR CALL PARK VPK/MPK]
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 16
Added option to disable predictive dial feature [DISABLE PREDICTIVE DIAL]
Added missed call indication popup window [MISSED CALL INDICATION]
Added ability to hide the picture icon on call screen if not set [HIDE PROFILE PICTURE]
Upgraded Dropbear to v2016.74.
Updated “FR”, “ES”, “PT” web language.
Removed G729 codec restriction.
Updated NTP default value to "pool.ntp.org" [NTP DEFAULT VALUE CHANGE]
Added backward support Affinity password and added support for passcode [Affinity PASSWORD
Added to show/hide VPK label in call screen with softkeys [HIDE/SHOW LABEL SUPPORT]
Improved the layout for smaller LCD phones’ call screen [CALL SCREEN IMPROVEMENT]
Improved attended transfer feature [ATTENDED TRANSFER IMPROVEMENT]
Added customizable OPUS Payload Type
Added DND Barge - Internal Calls and Paging [DND BARGE]
Added user option to enable Plantronics EHS headset ringtone [EHS HEADSET RINGTONE]
Hided Caller ID info on line key and BLF Presentation [HIDE BLF REMOTE STATUS]
Enabled RTCP & RTCP-XR [ENABLE RTCP & RTCP-XR]
Added GXP Color: Link command displays 100Mb/s for Gigabit ports [LINK COMMAND]
Added support TLS negotiation over 1, 1.1, and 1.2 for SIP [TLS NEGOTIATION]
Added VPK paging support inside call screen [VPK PAGING SUPPORT INSIDE CALL SCREEN]
Added enhancement for outbound notification [ENHANCEMENT FOR OUTBOUND NOTIFICATION]
Added support for Up/Down line switching when call screen is under active/overview state [LINE
Added support to send SIP log with the Keyword Filtering SIPStack [SIP LOG SUPPORT WITH
Added the MAC address in SIP Header of Register [MAC HEADER SUPPORT IN SIP HEADER]
Added ability to remove ‘target’ softkey [TARGET SOFTKEY REMOVAL]
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 17
Added ability to remove SIP error on LCD [SIP ERROR MESSAGE DISPLAY REMOVAL]
Added requirement sending instant message from the web [SENDING INSTANT MESSAGE FROM
Added features that supports configurable option for RFC2543 HOLD (0.0.0.0) and RFC3261 (a line)
Added the ability to manage Call History ability from Web GUI [CALL HISTORY MANAGEMENT]
Enhanced intercom options (includes Intercom Mute, Intercom Tone, and Intercom Barge) [INTERCOM
Added customizable Softkey Layout [SOFTKEY LAYOUT CUSTOMIZATION]
Added DND Authorized Number(Whitelist) & Blacklist and other enhancement [DND ENHANCEMENT]
Added Affinity support [Affinity SUPPORT]
Enhanced MORE softkey selection (list of the More softkey items instead of letting user keep tapping
MORE to switch to different page) [MORE SOFTKEY DISPLAY MODE]
Added the Web GUI default password warning message with password change shortcut [WEB GUI
DEFAULT PASSWORD WARNING MESSAGE]
Improved Bluetooth handsfree device connecting process [BLUETOOTH CONNECTING
Enhanced Instant Message List page to display to match the rest of the menu pages
Added contact picture/icon through SIP Call-Info header [CONTACT PICTURE SUPPORT]
Added LINE key mode support, coexist with legacy mode[LINE KEY MODE SUPPORT]
Added Live DialPad Feature [LIVE DIALPAD FEATURE SUPPORT]
Added Automatic Redial Function [AUTOMATIC REDIAL SUPPORT]
Added Preferred Default Account [PREFERRED DEFAULT ACCOUNT SUPPORT]
Added GXP2200EXT LCD timeout [GXP2200EXT LCD TIMEOUT ]
Split Firmware/Config Upgrade Method/Username/Password [SPLITTING FIRMWARE/CONFIG
Added ability to filter characters from dialed numbers [FILTER CHARACTERS FROM DIALED
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 18
Added ability to enable/disable local call forwarding rules without erasing configured numbers
[DISABLING LOCAL CALL FORWARDING RULES ENHANCEMENT]
Added specific model configuration file [SPECIFIC MODEL CONFIGURATION FILE]
BUG FIX
Fixed Device crash issue in call cancel performance test
Fixed Local Call Feature does not work when the account has dial plan *xxxx*x+
Fixed Device doesn't play ring tone after dismissing incoming call then ending current call
Fixed Two call with different accounts could not transfer in the same platform
Fixed DUT slowed down due to thread pool built up
Fixed Softkeys web page title is displayed wrong
Fixed ActionURL issues
Fixed Illogical remote party's avatar behavior on call screen
Fixed The picture still exists in call after deleted by the Delete button
Fixed Headset LED displayed abnormally after enabling Live DialPad in headset toggle mode
Fixed Web display language couldn't switch to Chinese
Fixed Missed Call Notification can still be reset after factory reset
Fixed Device could not get OpenVPN IP after downgrading firmware
Fixed DUT doesn't update the CID when preforming auto-attended transfer
Fixed Call history displayed wrong after transferring calls
Fixed No sound in first 2 calls established using Speaker in Sound page
Fixed History didn't show the CID info for the caller that was parked after picking up a parked call
Fixed Monitored Call Park VPK/EXT LED displayed abnormally if connected with extension boards
Fixed LCD displayed extra * if pressed More softkey then checked OK in setting Forward feature
Fixed LCD stayed in Cancel ForwardAll page 4s after pressing CancelFwd softkey
Fixed The call screen displayed abnormally after disabling predictiveve dialing feature
Fixed The EXT displayed abnormally when many accounts configured Eventlist BLF URI
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 19
Fixed device played dial tip tone in Idle after CancelFwd
Renamed "Resort" softkey in phonebook to "Sort"
Fixed DTMF request doesn't work issue
Fixed The extension board backlight was closed after switching Sync Backlight with LCD option
Fixed phone cannot get IP issue if VLAN tag is set to zero and VLAN priority is set to non-zero value
Fixed HTTP/HTTPS web port could still be reset in default status
Fixed Pressing DTMF MPK/VPK can’t play keypad tone after enabling “Live DialPad”
Fixed Audio mode worked abnormally in Toggle mode if set 'Enable Live DialPad'
Fixed Device works abnormally if setting Automatic Redial and Off-hook Auto Dial at the same time
Fixed Automatic redial doesn't work in transfer process
Fixed Device doesn't send SUBSCRIBE for Broadsoft feature after receiving 489
Fixed Device doesn’t play ring tone after pressing “Silence” softkey and then a new call comes in
Fixed Dial plan rule doesn't take effect under account mode
Fixed 802.1X port based authentication is not working
Fixed LCD displayed abnormally after one conference participant ends the call
Fixed Using "Use Configured IP" and "Accept Incoming SIP from Proxy only" feature exists conflict
Fixed Phone crashes while trying to off-hook
Fixed Device didn't play ring tone after cancel transfer
Fixed Dialing numbers non-matching dial plan still could trigger Automatic Redial
Fixed Audio wrongly switches to speaker when quickly toggling hook switch
Fixed Device plays dial tip tone in idle if modifying web options after cancelling ForwardAll
Fixed The ringtone is abnormal when enabling “Live Dialpad”
Fixed “DeleteAll” softkey doesn't take effect on Broadsoft phonebook list interface
Fixed The phone doesn't enter dialing state when “Newcall” softkey is pressed in idle state
Fixed System time does not update with time zone change
Fixed Custom Silence key will disable the sound of the established call
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 20
Fixed dial plan will cause the phone crash when it’s too long
Fixed crash when downloading cfg multiple times
Fixed GUI crashed after pressing softkeys repeatedly in UCM conference room
Fixed Phone fails to make call when about to re-register
Fixed Account Mode to make device handle multiple concurrent calls with only one line configured as default line mode
Fixed device stops at “Upgrading” screen after uploading correct firmware file with wrong name
Fixed screensaver is On but it will close when VPK is active
Fixed LCD couldn’t enter screensaver status after timeout
Fixed presence watcher VPK lights off in hold status
Fixed device doesn
’t automatically fill related info when save Broadsoft call log to local phonebook
Fixed the phone couldn't dial the contacts in the predictive dial list
Fixed If the NTP server does not respond, the device does not try the next IP in the list
Fixed phone is not honoring DHCP option 66
Fixed the default firmware Upgrade via mode should be HTTPS not TFTP after clicking reset
Fixed VLAN DHCP does not take effect in only Option 43 of the environment
Fixed UCM Detect doesn't work
Fixed Accounts and VPKs disappears after setting Keypad Menu mode
Fixed LCD displayed and skipped abnormally after switching language
Fixed web UI is not locked out after five login failures
Fixed failed to login SSH
Fixed device registration fails after enabling 'Validate Certificate Chain'
Fixed the CA certificate cannot be deleted after uploaded on Trusted CA Cert
Fixed phonebook sorting on web page didn't work
Fixed Eventlist BLF list should disappear after disabling Auto Provision Eventlist BLFs
Fixed GXP2130&2135 lack Screensaver Source option on LCD display web page
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 21
Fixed There is no Save and Apply button on EXT web page
Fixed VPK is displayed abnormally after switching page then pressing lines in dialing page
Fixed some action URL did not work
Fixed web prompts 'Phone is currently busy' if change is saved after cancelling redial
Fixed G.723 Rate default value of Account5/Account6 is wrong after factory reset
Fixed Account5/Account6 registered status doesn't display on Account Status web page
Fixed Auto-Attended transfer still works even without enabling the feature
Fixed support to stop Screensaver when VPK is active
Fixed the volume is wrong after switching audio channel at the CALLING screen
Fixed SCA Call-info call termination does not show active state on second DUT
Fixed LCD doesn't skip after EXT speed Dial in Target page
Fixed there is no Conference mode in LCD VPK/MPK settings page
Fixed 0 changed to + if DTMF Delay set with larger value
Fixed LCD displayed in English and switching language doesn't work after factory reset
Fixed if VPK using call park, even if it subscribes failed, we should still support dial out
Fixed Edit and Dial window disappears after pressing some keys
Fixed Busy tone is abnormal after far-end and the call
Fixed device does not play key/DTMF tone at Dialing/Call screen
Fixed VPKs in HF line page doesn't work
Fixed public mode login window is displayed abnormally
Fixed Account1 registers abnormally after enabling Delay Registration
Fixed LCD displays abnormally when there is incoming call to non-Account1 in ForwardAll page
Fixed phone answers paging call even if custom call-info is configured
Fixed Password Length and DTMF Delay are displayed abnormally if values are out of range
Fixed users couldn't download devices' screenshot pictures
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 22
Fix wrong LLDP VLAN ID is used by phone and phone's Ethernet VLAN interface is not removed when
VLAN ID from network switch LLDP packet is greater than 255
Changed "Local Call Log" to be "Local Call History"
Fixed Monitored Call Park VPK is displayed abnormally after pickup then ending call
Fixed Auto Provision Eventlist BLF must be filled with EXT field from XML file sent by Broadsoft server
Fixed VPK cannot reset value and description fields via config file
Fixed BLF MPK doesn’t turn off after Reset web page
Fixed Chinese tooltip for Local SIP Port is wrong
Fixed device works abnormally after using random port
Fixed click-to-dial works abnormally in Click-To-Dial disabling status
Fixed weather doesn’t work
Fixed idle LCD brightness displays without icon
Fixed LCD displays abnormally after pressing XML VPK in call
Fixed LCD doesn’t display UCM conference CEI info
Fixed LCD displays abnormally in pickup call page after parking call
Fixed audio disappears and no sound if back to home then adjusting volume in call
Fixed LCD displays abnormally after switching pages in Transfer/CONF
Fixed callee Request Timer doesn't work
Fixed Blind transfer recovery feature has some issues
Fixed LCD prompts “System Error: CSS Error” in talk ing status
Fixed device can’t get the weather information after disable/enable weather
Fixed phone doesn’t register account and web page phonebook click-to-dial displays error
Fixed device works abnormally after switching calls in Random RTP port mode
Fixed Auto Provision Eventlist BLFs fails after re-registering the account
Fixed NAPTR/SRV mode in DNS works abnormally
Fixed after disabling weather and currency phone still performs DNS query for Yahoo
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 23
Fixed Line keys and VPKs couldn’t be modified through config file
Fixed LCD displays abnormally in pickup call page after parking call
Fixed the very first LLDP packet (with TTL=0) is not sent out
Fixed device does not send IP addr in LLDP chassis but MAC address
Fixed Device uses wrong account to predictive dial in HF dialing page
Fixed there is no Bluetooth phonebook on contacts
Fixed call history group on web and LCD are not the same
Fixed LCD doesn’t update in time when call history is cleared from web page
Fixed missed call icon doesn’t disappear after the records are deleted from webUI
Fixed contacts Search All feature interface jump error causes search failed
Fixed the phone doesn’t use default port 80 when the HTTP proxy URL doesn’t include port value
Fixed LCD does not prompt whether the input of HTTP(S) ID&PW is correct or wrong
Fixed BLFs take long to recover after network outage
Fixed LCD does not display error message when self-defined city code is invalid
Fixed phone sends multiple DTMF tones when in-audio method
Fixed LCD brightness displays wrong if there is incoming call in Appearance page
Fixed the capture store in USB doesn’t take effect
Fixed phone doesn’t reset Nonce count when authentication is required during registration
Fixed not sending SSL certificate during wallpaper download
Fixed Eventlist BLFs of non-related account disappears after unregistering account
Fixed BLF MPK on the last line doesn’t display status after running on/off handsfree mode
Fixed “Check new firmware only when F/W pre/suffix changes” feature doesn’t work
Improved call screen switching performance
Fixed BLF status not changing correctly
Fixed predictive favorite contact not showing after offhook
Fixed phone random crash when process config file update
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 24
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user’s point of view.
SHOW/HIDE VPK LABEL ON CALL SCREEN
Web Configuration
This option can be found under device web UI Settings Programmable Keys Virtual Multi-Purpose
Keys Settings Show Keys Label。
Functionality
Allowing Users to either Show, Hide, or Toggle between the VPK or Line label.
Toggle:
Hide:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 25
Show:
New Pvalue
Pvalue Description Value Range
P8386 <New Pvalue>
Value = “0” Toggle
Show Keys Label
Value = “1” Show
Value = “2” Hide
Default
Toggle
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 26
MISSED CALL NOTIFICATION
Web Configuration
This option can be found under device web UI Settings Call Features Enable Missed Call
Notification.
Functionality
Allowing users to decide whether to show the notification popup window for missed call or not.
(Note: currently the manually rejected calls are counted as missed calls.)
When set to No:
When set to Yes:
New Pvalue
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 27
Pvalue Description Value Range Default
P8393 <New Pvalue>
Value = “0” No
Enable Missed
Call Notification
Value = “1” Yes
No
SYNC EXT BOARD BACKLIGHT WITH LCD
Web Configuration
This option can be found under device web UI Settings EXT Settings Sync Backlight with LCD.
Functionality
Allowing users to decide whether they wanted their Extension board (EXT2200) to be in sync with their phone
’s LCD or not. (Backlight will turn off while LCD goes IDLE)
New Pvalue
Pvalue Description Value Range Default
P8400 <New Pvalue>
Value = “0” No
Sync Backlight
Value = “1” Yes with LCD
No
CERTIFICATE UPLOAD FOR OPENVPN
Web Configuration
This option can be found under device web UINetwork OpenVPN Settings.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 28
Functionality
Allow user to simply upload the actual file without needing to do copy & paste as before.
Old:
New:
Related Pvalue
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 29
Pvalue Description
P9902 OpenVPN CA
P9903 OpenVPN Certificate
P9904 OpenVPN Client Key
Value Range Default
String
String
String
N/A
N/A
N/A
PAI UPDATE FOR CALL PARK VPK/MPK
Functionality
The phone will update the number in call history regarding the PAI that it received from the server. For example, when your number is parked in the callpark space, and the callpark space has been set into a
VPK/MPK, if you use the VPK/MPK to retrieve the call, the number will be updated in the call history.
However, if you don’t use VPK/MPK but dial directly into the callpark space, the number will not be updated in the call history. In both cases, the number will be updated in the talking states.
If use VPK/MPK to park the call, you will see the dialing number (71) in call history.
If dial 71(parking space) to pick up the call, the call history will be:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 30
If use VPK/MPK(value set to parking space, in this case: 71) to pick up parked call, the call history:
The reason for VPK/MPK to have different call history is because when you receive SIP message,
You will receive PAI. And the PAI will update the call history. On the other hand, when you directly dialed the parking space number, you will be considered as the same as calling an extension, therefore, no updates in the call history.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 31
DISABLE PREDICTIVE DIALING
Web Configuration
This option can be found under device web UI Settings Call Features Predictive Dialing Feature
Functionality
Allowing user to disable predictive dialing, if disabled, the user will no longer see any predictive number while dialing in dialing pages.
Enabled:
Disabled:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 32
New Pvalue
Pvalue Description Value Range
P22126 <New Pvalue> Value =
“0” Disabled
Predictive Dialing
Value = “1” Enabled
Feature
Default
Enabled
MISSED CALL INDICATION
Functionality
This indication can notify users about their missed calls with popup window indicating the number of missed calls and the last missed call’s information.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 33
HIDE PROFILE PICTURE
Functionality
Now the users will no longer see the picture in calling state if the picture has not been set. This will save much space for number and name display.
Previous:
Now:
NTP DEFAULT VALUE CHANGE
Changed Pvalue
Pvalue Description Value Range Default
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 34
P30 < Pvalue>
NTP Server
String Changed from to "pool.ntp.org"
“us.pool.ntp.org”
Affinity PASSWORD SUPPORT
Functionality
Affinity (Computer-Telephony Integration) provides ability to manage phone calls from a computer including basic call operations such as making and answering calls, and advanced call operations such as call forward, conference, call hold and more.
Request format
The general Affinity commands request format is: http://Phone-IP-Address/cgi-bin/function?passcode=PASSWORD¶m=value
“Function” is one of Affinity functions as described in next chapter (api-get_line_status for example);
“Password” is the phone’s admin level password. This can also be replaced with “passcode”.
“Param=value” is the parameter for specific Affinity function type.
For more detailed guide about Affinity functionality, please refer to Affinity Guide: http://www.grandstream.com/sites/default/files/Resources/CTI_Guide.pdf
HIDE/SHOW LABEL SUPPORT
Functionality
With this softkey, users can hide all the label to free up more space on the screen to see more display of either phone numbers or names.
When the label is shown:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 35
When the label is hidden:
CALL SCREEN IMPROVEMENT
The texts will move from right to left if the texts are more than one line. Now we can see the full information without getting cutoff.
For example:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 36
ATTENDED TRANSFER IMPROVEMENT
Web Configuration
“Auto attended transfer” is renamed to “Attended Transfer Mode”. The options are changed to “Static” and
“Dynamic”.
Functionality
When choosing “Static”, this will be acting as “No” in “Auto Attended Transfer”, only Blind Transfer will be available. However, if “Dynamic” was chosen, then attended transfer will also be activate. In Dynamic mode, after pressing transfer softkey, you will have both blind and attended transfer available. The default highlight will be on AttTrnf (since the AttTrnf softkey is in MORE softkey by default, you will not be able to see the highlight unless you customize the softkey layout). The transfer mode can be identified by those two softkeys that are highlighted in blue when pressing “#” or SEND keys. However, if the user wishes they could perform a blind transfer by pressing the "BlindTrnf" softkey.
NOTE: If users press transfer hard key as
“Send” after dialing the number, it will always perform as Blind
Transfer regardless of modes.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 37
When choosing “Dynamic”, press Transfer softkey, you will enter this page:
By default, the highlighted softkey is AttTrnf. (You will not be able to see the highlight because it’s in the
MORE softkey.) In this state, “#”, Send Key and AttTrnf softkey will act as Attended Transfer.
During ringing states, you can press the Transfer softkey to perform semi-auto-Attended Transfer or you can wait till the call is established to finish Attended Transfer.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 38
If you press BlindTrnf before you input the number, BlindTrnf will be highlighted (
In this states, “#”, Send
Key and BlindTrnf softkey will act as Blind Transfer.)
Changed Pvalue
Pvalue Description Value Range Default
P1376 < Pvalue>
Attended
Transfer Mode
Value = “0” changed to Static
Value = “1” changed to Dynamic
0
ATTENDED CUSTOMIZABLE OPUS PAYLOAD TYPE
Web Configuration
This option is under web UI->Accounts->Account#-
>Audio Settings “OPUS Payload Type”:
Functionality
Now the users can customize and specify the OPUS payload type.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 39
Changed Pvalue
Pvalue Description Value Range
P2385 < Pvalue>
OPUS Payload Type
96-127
Default
123
DND BARGE
Web Configuration
This option can be found under device web UI Settings Call Features DND Override
Functionality
New Pvalue
Allowing user to set call override while the phone is under Do Not Disturb mode. By setting it off, you will not receive any calls. By setting as Allow all, all calls will be allowed. Allow
Only Contacts will only allow numbers that were saved in the phonebook. Allow Only
Favorites will only allow favorite numbers in the phonebook to come in.
Pvalue Description Value Range Default
P8372 <New Pvalue>
DND Override
Value = “0” Off
Value = “1” Allow All
Value = “2” Allow Only Contact
Value = “3” Allow Only Favorites
EHS HEADSET RINGTONE
Web Configuration
Settings --> Preferences-->Audio Control
Off
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 40
Functionality
Allow user to enable the ringtone from Plantronics EHS headset and play the ringtone in the headset.
New Pvalue
Pvalue Description Value Range Default
Normal P6779 <New Pvalue> Value = 0 Normal
EHS Headset
Ring Tone
Value = 1 Plantronics EHS
HIDE BLF REMOTE STATUS
Web Configuration
Settings --> Call Features
Functionality
Allow users to hide the Caller ID from showing at the BLF VPK and EXT.
When Disabled:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 41
The VPK will flash between the Caller ID and the BLF account.
When enabled:
The VPK will stay under the monitored account and only notify there is an incoming call.
New Pvalue
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 42
Pvalue Description Value Range Default
P8374 <New Pvalue>
Hide BLF Remote Status
Value = “0”; No
Value = “1”; Yes
No
ENABLE RTCP & RTCP-XR
Functionality
Allow user to have various qualities of voices for listening and/or conversational quality.
LINK COMMAND
TLS NEGOTIATION
Functionality
TLS (transport layer security) is a common protocol which provides privacy to your communication. It will also manage the communication between IP phones to prevent the communications from tampering each other.
Now the phone support TLS 1.0 (RFC2246), 1.1 (RFC4346), and 1.2 (RFC5246)
VPK PAGING SUPPORT INSIDE CALL SCREEN
Functionality
Now the user can utilize their VPK mode with their settings while in call screen. Such as dial DTMF.
ENHANCEMENT FOR OUTBOUND NOTIFICATION
Functionality
Align the outbound notification with the call log change if the same account registered in multiple phones.
LINE SWITCHING IN CALL SCREEN
When having two lines(or more) active
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 43
By pressing up/down, you’ll be able to manage between the calls as such:
Functionality
Allow the user to manipulate between calls and the select the option through softkeys.
SIP LOG SUPPORT WITH KEYWORD FILTERING
Web Configuration
Maintenance --> Syslog
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 44
Functionality
By setting Send SIP Log to Yes and Syslog Level set to DEBUG, you will still get SIP log from syslog with the Keyword Filtering SIPStack. (This feature requires reboot.)
New Pvalue
Pvalue Description Value Range Default
P208 Syslog Level Value = 0; NONE
Value = 1; DEBUG
Value = 2; INFO
Value = 3; WARNING
Value = 4; ERROR
NONE
P1387 Send SIP Log Value = 0; No
Value = 1; Yes
P22129 Syslog Keyword Filtering String
No
N/A
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 45
MAC HEADER SUPPORT IN SIP HEADER
Web Configuration
Accounts -> Account # -> SIP Settings -> Custom SIP Headers
If choose yes:
Functionality
Allow user to see the MAC address of the phone they are using from the trace of the SIP Header of Register.
New Pvalue
Pvalue Description Value Range Default
No P26061 Use MAC Header
TARGET SOFTKEY REMOVAL
Web Configuration
Settings --> Programmable Keys--> Softkeys Settings
Value = 0;No
Value = 1;Yes
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 46
Functionality
Allow user to remove target softkey by toggle Yes/No option during the off-hook dial screen and transfer screen.
New Pvalue
Pvalue Description Value Range Default
P8377 Show
Softkey
Target Value = 0; No
Value = 1; Yes
SIP ERROR MESSAGE DISPLAY REMOVAL
Web Configuration
Settings --> Call Features
Yes
Functionality
Allow user to disable the SIP error message that will show on the call screen.
New Pvalue
Pvalue Description Value Range
P8376 Show SIP Error
Response
Value = 0; No
Value = 1; Yes
Default
No
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 47
SENDING INSTANT MESSAGE FROM THE WEB
Web Configuration
Right next to the phone icon.
Then you will get to:
Functionality
Allow users to send instant messages not only through the phone but also from the Web GUI.
RFC2543 HOLD SUPPORT
Web Configuration
Accounts -> Account # -> Call Settings:
Functionality
Allow user to toggle between RFC2543 hold and RFC3261 hold. RFC2543 hold allows user to disable the hold music send to the other side. RFC3261 will play the hold music to the other side.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 48
New Pvalue
Pvalue
P26062
CALL HISTORY MANAGEMENT
Web Configuration
Settings --> Call History
Description Value Range
RFC2543 Hold Value = 0; No (RFC3261)
Value = 1; Yes (RFC2543)
Default
No
Functionality
Allow user to manage call histories not only through phone but also through web GUI.
INTERCOM SETTINGS SUPPORT
Web Configuration
Accounts -> Account # -> Intercom Settings
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 49
Functionality
Allow user to set-up and manage Intercom including Barge, warning tone, auto answer, and mute.
New Pvalue
Pvalue Description Value Range Default
P298
Allow Auto Answer by
Call-Info/Alert-Info
Value = 0; No
Value = 1; Yes
No
P26019
P26071
Allow Barging by Call-
Info/Alert-Info
Value = 0; No
Value = 1; Yes
Mute on answer Intercom call
Value = 0; No
Value = 1; Yes
No
No
P26072 Play warning tone for
Auto Answer Intercom
Value = 0; No
Value = 1; Yes
No
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 50
P2356 Custom Alert-Info for String
Auto Answer
SOFTKEY LAYOUT CUSTOMIZATION
Web Configuration
Settings --> Programmable Keys-->Softkeys Settings
After
enabling
the option “Custom Sotfkey Layout” (Default Disabled):
N/A
The user can then customize their softkey layout:
Functionality
Allow user to manage softkey layout in each available page after enabling the option. NOTE: For Some softkeys, enabling them are not a sufficient condition for them to show up, they will only show up if they satisfy certain config conditions and are enabled in web GUI.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 51
DND ENHANCEMENT
Functionality
Allow user to ban phone number by adding the number into the blacklist, or on the other hand, allow phone numbers to come in during DND mode by adding the number into the whitelist.
Affinity SUPPORT
Web Configuration
Settings --> Affinity Settings
Functionality
Allow user to enable and disable CTI function and choose the account that associate with Affinity.
New Pvalue
Pvalue Description Value Range Default
P8334 Affinity Support Value = 0; Disabled
Value = 1; Enabled
Disabled
P8335 Affinity Account Depending on the model Account 1
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 52
MORE SOFTKEY DISPLAY MODE
Web Configuration
Settings -->Programmable Keys-->Softkeys Settings
Functionality
Allow user to choose from the original Toggle mode or the enhanced Menu mode. With the enhanced Menu mode, the MORE softkey now will not need the user to tap multiple times of MORE to get to the next pages, instead, pressing MORE will have a popup window and allow user to choose from the list.
WEB GUI DEFAULT PASSWORD WARNING MESSAGE
Functionality
It reminds the user to change the password and allow user to modify the password by clicking the modify button.
BLUETOOTH CONNECTING ENHANCEMENT
Functionality
If the phone sends out the paring PIN, the user will need enter using keypad on the phone:
If the phone generated the paring PIN, and it will display on the LCD, the user need to input this PIN on the
Bluetooth device to finish paring:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 53
CONTACT PICTURE SUPPORT
Functionality
Allow callee to see the picture/icon that the caller set. You can find the Call-Info header contains with the jpg file from sip messages. (Currently only support Openser SIP server).
LINE KEY MODE SUPPORT
Web Configuration
Settings --> Programmable Keys-->Virtual Multi-Purpose Keys Settings
Functionality
Allow users to change between Line Mode and Account Mode. Under "Line Mode", VPKs can be configured as line keys and only one call can be established per line key. Line keys are not associated with any account so multiple accounts can use any given line key to establish a call. Under Account Mode, VPKs can be configured as account keys. An account key can only be associated with one account but can have multiple calls per key .
Line mode:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 54
Account mode:
As the screenshot showed, the Line key will represent the line itself. In the Account mode, instead of representing the line itself, the VPK represent the account, thus it can hold more than one line in the same account without using other LINE keys.
New Pvalue
Pvalue Description Value Range Default
P8369 Key Mode Value = 1; Line Mode
Value = 2; Account Mode
Line Mode
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 55
LIVE DIALPAD FEATURE SUPPORT
Web Configuration
Settings -> Call Features
Functionality
Allow user to enable/disable Live DialPad function, when enabled, the phone will automatically dial out the number punched in after the number of seconds that the user had set.
New Pvalue
Pvalue Description Value Range Default
P8350 Enable Live
DialPad
Value = 0; No
Value = 1; Yes
No
P8351
AUTOMATIC REDIAL SUPPORT
Web Configuration
Settings -> Call Features
Live DialPad
Expire Time
2-15 (seconds) 5
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 56
Functionality
Allow user to enable the function, if automatic redial is enabled, when called number is busy, the phone will
Redial the number X number of times set with Y seconds interval in between each redial.
New Pvalue
Pvalue Description Value Range Default
P8353 No
P8354
Enable Automatic Redial Value = 0; No
Value = 1; Yes
Automatic Redial Times 1-200 10
P8355 Automatic Redial Interval 1-360 (seconds)
PREFERRED DEFAULT ACCOUNT SUPPORT
Web Configuration
Settings -> Call Features
20
Functionality
Allow user to select a default account when other accounts have not been selected. When chosen an account, this account will be the account that live DialPad and auto Redial used. However, if this account is not active, then the first account that is active will be used.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 57
New Pvalue
Pvalue Description Value Range (Depends on how many accounts)
Default
Account 1 P29612 Preferred
Default Account
Value = 0; Account 1
Value = 1; Account 2
Value = 2; Account 3
Value = 3; Account 4
Value = 4; Account 5
Value = 5; Account 6
GXP2200EXT LCD TIMEOUT
Web Configuration
Settings --> Preferences-->LCD Display
Functionality
When setup the timeout of the backlight of the phone, the user now also sets up the backlight for the extension board.
New Pvalue
Pvalue Description Value Range (minutes) Default
P8356 Active Backlight
Timeout
1-90 1
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 58
SPLITTING FIRMWARE/CONFIG UPGRADE METHOD
Web Configuration
Maintenance -> Upgrade and Provisioning
Before:
Now:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 59
Functionality
Now the users will have better idea of which section is for configuration updates and which section is for firmware updates.
New Pvalue
Pvalue Description Value Range Default
P6768 Firmware HTTP/HTTPS
Username
String N/A
P6769 Firmware HTTP/HTTPS
Password
String N/A
FILTER CHARACTERS FROM DIALED NUMBERS
Functionality
After downloading phonebook, when dialed directly from the contact, the number may include special characters such as “(“, “)”, “-” or space in between number.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 60
Now when press Dial softkey directly, the phone will filter out the special characters and make the calls send out properly.
DISABLING LOCAL CALL FORWARDING RULES ENHANCEMENT
Functionality
Now the users can access their call forwarding from the phone without erasing the configured numbers.
On the phone, you can access through Menu -> phone (6) -> Call Features -> Account #.
When disabled:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 61
When enabled:
SPECIFIC MODEL CONFIGURATION FILE
Functionality
Now when the phone is provisioning, the configuration file it requested will be based on the phone’s model.
For example, GXP2130 will request cfggxp2130.xml file and GXP2140 will be cfggxp2140.xml.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 62
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 63
FIRMWARE VERSION 1.0.7.97
PRODUCT NAME
GXP2130, GXP2140, GXP2160, GXP2170 and GXP2135
DATE
10/03/2016
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware
version or lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version
or lower is not supported.
This release restored the Weather service. Part of the change requires users who are
using
“Self-Defined City Code” to change their setting. The upstream content provider has changed the API to yield a free-style search based on this argument instead of mapping to a specific code being used before. Hence the city being displayed would have been
incorrect. These users should change this option to the name of the city, for instance：
“Dallas”; “Dallas, NC”; “Dallas, Scotland”; “Liverpool”; “Liverpool, NY”; “Liverpool, England”.
Note: If you enter only the name of the city it’s going to go the best match. In the case of Dallas it would be Dallas, TX; and in the case of the Liverpool it would be Liverpool, England.
This release adds Predictive Dialing feature which included a required internal change. If you
downgrade from 1.0.7.97 to 1.0.7.25 you will lose the call history.
ENHANCEMENT
Added support for configuring RTP port range [SUPPORT FOR CONFIGURING RTP PORT RANGE]
Added support for more keys as send [SUPPORT MORE KEYS USED AS SEND]
Added support of configurable HTTP/HTTPS port for Web UI [SUPPORT OF CONFIGURABLE
Added language input search support [SUPPORT FOR LANGUAGE INPUT SEARCH]
Added single button call parking support [SUPPORT OF SINGLE BUTTON CALL PARK]
Added option to set the DTMF delay [OPTION TO SET DTMF DELAY]
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 64
Added option to enable/disable HTTP access [OPTION TO DISABLE HTTP ACCESS]
Added silent ringtone option [SILENT RINGTONE OPTION]
Added option to lock or restrict to only call/receive functionality without menu access and ability to
configure anything from phone side [CONFIGURATION VIA KEYPAD MENU]
Added ability to change instant message display duration [INSTANT MESSAGE DISPLAY DURATION]
Added ability to change screensaver pictures via HTTP server [SCREENSAVER SERVER PATH]
Added support for DHCP option 132 & 133 tunneled through DHCP option 43 [ENABLE DHCP VLAN]
Added ability to use MPK to trigger a conference [MPK FOR CONFERENCE]
Added ability to display mobile and home number when searching in local
Added ability to set call forwarding from the web GUI [CALL FORWARDING FROM WEB UI]
Added ability to disable/enable a sound notification for each ringing monitored BLF [BLF PICKUP
Added option to allow the user to modify the configuration Bluetooth via Web UI [BLUETOOTH
Added option to enable/disable voicemail indication [VOICEMAIL INDICATION]
Added random registration [RADOM REGISTRATION]
Added return code when call is rejected or DND [RETURN CODE]
Added option to enable Plantronics EHS headset ringtone [PLANTRONICS EHS HEADSET
Changed OPUS sampling rate to 48000 Hz. SDP session descriptions in invite for OPUS: a=rtpmap:123 opus/48000/2
BUG FIX
Fixed line seize failed and 481 subscription does not exist
Fixed when screensaver is active, popup window does not work correctly, e.g. if there is new firmware found during screen saver, user cannot reject it
Fixed if VPK is using call park, we should still support dial out even if SUBSCRIBE fails
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 65
Fixed users cannot search for a contact without knowing the account to which it is assigned
Fixed link command displays 100Mb/s for Gigabit ports
Fixed call forward using forward softkey ignores the dial plan
Fixed phone reply with 486 when the called extension is registered on the same phone
Fixed cannot accomplish auto-attended transfer using BLF key containing “.”
Fixed device GUI crashed after pressing transfer VPK
Fixed LCD will not skip after pressing RIGHT key to call in target page
Fixed LCD displays wrong info after offhook timeout
Fixed device upgrade fails after uploading firmware in serial console disabling status
Fixed screensaver source works abnormally after changing screensaver power
Fixed switching hands-free mode LED to re-sending BLF subscribe
Fixed GXP2130 & 2135 has no screensaver source option on LCD display webpage
Fixed Bluetooth name in LCD and webpage are displayed abnormally
Fixed phone continues to send SIP options after receiving “415 Unsupported Media Type”
Fixed no conference mode in LCD VPK/MPK settings page
Fixed conference MPK icon is the same with speed dial mode
Fixed conference ID is still displayed on extension board after cleaning
Fixed some new features are still resettable even in default status
Fixed Bluetooth power option in LCD displayed mistakenly
Fixed screensaver settings in LCD not identical with those on webpage
Fixed pressing RIGHT key still could modify VPK in keyboard menu lock mode
Fixed “Enable DHCP VLAN” feature tip info displaying XXXX
Fixed LCD does not skip after EXT speed dial in target page
Fixed GXP color phone should wait to send REFER until the hold process is complete when doing call park
Fixed the existed extra “Call History Flash Writing” option on call features webpage
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 66
Fixed added phone will still resend SUBSCRIBE when receiving 489 response with non-zero Retry-
After header
Fixed there is one-way audio in Hand-free call answered by “Answer” softkey
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user’s point of view.
SUPPORT FOR CONFIGURING RTP PORT RANGE
Web Configuration
This option can be found under device web UI Settings General settings.
Functionality
It gives users the ability to define the parameter of the local RTP port used to listen and transmit. This parameter defines the Max local RTP port from 1024 to 65400. Local RTP port will be incremented by 4 on every new call so this number has to be greater than base RTP port by 4 for each new line.
New P value
P value Description Value Range Default
P29608 <New P value> String: 5204
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 67
Local RTP port 1024 to 65400 range on gxp21XX color phones
SUPPORT MORE KEYS USED AS SEND
Web Configuration
This option can be found under device web UI Account Account# Call Settings
Functionality
Pressing selected key will immediately dial out.
New Pvalue
P value Description Value Range Default
P72 <New P value>
Key As Send
Value = 0; Disabled
Value = 1; Pound (#)
Value = 2; Star (*)
1
SUPPORT OF CONFIGURABLE HTTP/HTTPS WEB PORT
Web Configuration
This option can be found under device web UI Maintenance Security Settings Security.
Functionality
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 68
To configure the HTTP/HTTPS port from the web interface.
New P value
P value Description Value Range
P22120 <New P value>
HTTP Web Port string
Default
80
P22121 <New P value>
HTTPS Web Port string
SUPPORT FOR LANGUAGE INPUT SEARCH
Web Configuration
This option can be found under device web UI Maintenance Language.
443
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 69
Functionality
For Latin-based languages like German and Czech, device would allow user to Input with Hrvatski, Czech,
Deutsch, Spanish, French, Hungarian, Italian, Portuguese, Slovenian, and Turkish when selecting corresponding language display on LCD.
SUPPORT OF SINGLE BUTTON CALL PARK
Web Configuration
This option can be found under device web UI Settings Programmable Keys Programmable Keys.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 70
Accounts Account# SIP Settings Advanced Features:
Functionality
Allow users to configure the Barge-In code for the call park function from the MPK. During an active call when the idle call park MPK button (LED green) is pressed, the call will be parked. When the busy call park
MPK button is red, which means a call has been parked. By pressing the Busy (LED red) MPK button, The barged-in code will be prepended to the call park number and the parked call will be retrieved.
New P value
P value Description Value Range Default
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 71
P323 <Added Option>
MPK Mode
Value = 10;
Monitored Call Park
None
P26046 <New P value>
Call Pickup Barge-In
Code
String N/A
OPTION TO SET DTMF DELAY
Web Configuration
This option can be found under device web UI Accounts Account# Audio Settings.
Functionality
Add ability for user to configure the delay between sending DTMF during MPK/VPK use (in milliseconds).
New P value
P value Description Value Range Default
P26060 <New P value>
DTMF Delay string 250
OPTION TO DISABLE HTTP ACCESS
Web Configuration
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 72
This option can be found under device web UI MaintenanceSecurity Settings Security
Functionality
Allow user to set protocol or disable access to web interface.
New P value
P value Description Value Range Default
P1650 <New P value> Value = 0; HTTPS
Web
Mode
Access Value = 1; HTTP
Value = 2; Disabled
HTTP
SILENT RINGTONE OPTION
Web Configuration
This option can be found under device web UIAccounts Account# Call Settings.
Functionality
Allow user to choose silent ring tone.
New P value
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 73
P value Description Value Range Default
P423 <Added Value>
Account Ring Tone
Value = 0; System Ring Tone
Value = 1; Custom Ring Tone 1
Value = 2; Custom Ring Tone 2
Value = 3; Custom Ring Tone 3
Value = 4; Silent
System Ring
Tone
CONFIGURATION VIA KEYPAD MENU
Web Configuration
This option can be found under device web UIMaintenanceSecurity SettingsSecurity.
Functionality
Allow user to lock or restrict to only call/receive functionality without menu access and ability to configure anything from phone side.
New P value
P value Description Value Range Default
P1357 <New P value> Value = 0; Unrestricted
Configuration via
Keypad Menu
Value = 1; Basic settings only
Value = 2; Constraint Mode
Value = 3; Locked Mode
Unrestricted
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 74
INSTANT MESSAGE DISPLAY DURATION
Web Configuration
This option can be found under device web UISettingsCall Features.
Functionality
Increase the max duration displayed to 900 and the backlight will turn on when receiving an IM while idle.
Also allow the user to set sound notification when receiving an instant message.
New P value
P value Description Value Range Default
P26055 <New >
Instant Message
Popup Timeout
0-900 10
SCREENSAVER SERVER PATH
Web Configuration
This option can be found under device web UISettings Preferences-->LCD Display.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 75
Functionality
Allow user to download their screensaver from the HTTP server.
New P value
P value Description Value Range
P934 <New P value>
Screensaver Server
Path
String
ENABLE DHCP VLAN
Web Configuration
This option can be found under device web UI Network -> Advanced Settings
Default
N/A
Functionality
Added support DHCP Option 132 & 133 tunneled through DHCP Option 43 on the GXP21xx Color to deploy it on the network. By enabling the DHCP VLAN, the phone will try to read VLAN setting from DHCP option
132 and 133. If both of values in these two options are empty, phone will then read from option 43.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 76
The format of the data in Option 43 should be like as follows:
Code Len Data item Code Len Data item Code
+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
| T1 | n | d1 | d2 | ... | T2 | n | D1 | D2 | ... | ... |
+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
Here is a valid example:
84:04:31:31:34:00:85:02:35:00
Which means tunnel option 132 value 114 and option 133 value 5 via option 43. Option 132 for VLAN ID and 133 for priority, or from Option 43 which encapsulates both two values.
New P value
P value Description Value Range Default
P8300 <New P value>
Enable DHCP VLAN
Value = 0; Disabled
Value = 1; Enabled
0
MPK FOR CONFERENCE
Web Configuration
This option can be found under device web UISettings Programmable Keys Programmable Keys.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 77
Functionality
Allow user to set their Multi-
Purpose Key to “Conference” mode to trigger a conference. By setting the extension number in the value box, the users will be able to activate a 3-way conference by simply press the assigned MPK button.
New P value
P value Description Value Range Default
P323 <Added P value>
MPK 1
Value =
“12”; Conference
0
DIAL FROM LOCAL PHONEBOOK
Phone Configuration
This option can be found under device LCD MenuContactsLocal Phonebook[Select number]
Edit/Dial.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 78
Functionality
When the new option = Edit/Dial - is selected, user can edit the phone number and choose one account to dial to that number.
CALL FORWARDING FROM WEB UI
Web Configuration
This option can be found under device web UIAccounts Account # Feature Codes.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 79
Functionality
Allow user to configure their forward calls to forward the calls to specific target. The users will be able to set either unconditionally, Busy, or Delayed (No Answer) for the call forward destination.
BLF PICKUP SOUND
Web Configuration
This option can be found under device web UISettingsCall Features.
Functionality
Give the user the ability to set sound notification to the monitoring BLF line.
New P value
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 80
P value Description Value Range
P9906 <New P value> Value = 1; Enable
Enable BLF Pickup
Sound
Value = 0; Disable
BLUETOOTH CONFIGURATIONS
Web Configuration
This option can be found under device web UISettingsBluetooth
Default
0
Functionality
Allow the user to modify the configuration of the Bluetooth via Web UI.
New P value
P value Description Value Range Default
P2910 <New P value> Value = 0; Off
Enable
(GXP21XX)
Bluetooth Value = 1; On
Value = 2; Off & Hide Menu
From LCD
1
0 P2911 <New P value> Value = 0; Off
Enable Bluetooth
Hands-free feature
Value = 1; On
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 81
(GXP21XX)
P8364 <New P value>
Bluetooth
Name
Device
String DeviceModel_MacA ddress
VOICEMAIL INDICATION
Web Configuration
This option can be found under device web UISettingsPreferences-->LED Control
Functionality
Allow users to enable/disable the LED which indicates if there are any VMs/MSGs.
New P value
P value Description Value Range Default
0 P8371 <New P value> Value = 0; No
Disable VM/MSG power light flash
Value = 1; Yes
RADOM REGISTRATION
Web Configuration
This option can be found under device web UISettingsGeneral Settings.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 82
Functionality
Add an interval that the user can configure the time that phone will send SIP message to the register account after rebooting.
New P value
P value Description Value Range Default
0 P8359 <New P value>
Delay Registration string
RETURN CODE
Web Configuration
This option can be found under device web UISettings Call Features.
Functionality
Allow users to set up the return message to either a Refused call or when Do Not Disturb feature is active with the indicated messages and code number.
New P value
P value Description Value Range Default
P8360 <New P value> Value = 0; Busy(486)
Return Code When
Value = 1;
Refusing Incoming Call
Temporarily Unavailable(480)
0
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 83
Value = 2; Not Found (404)
Value = 3; Decline(603)
P8361 <New P value> Value = 0; Busy(486)
Return Code When
Value = 1;
Enable DND
Temporarily Unavailable(480)
Value = 2; Not Found (404)
Value = 3; Decline(603)
0
PLANTRONICS EHS HEADSET RINGTONE
Web Configuration
This option can be found under device web UISettingsPreferences-->Audio Control.
Functionality
Allow user to enable/disable the Plantronics EHS headset and the ringtone of it.
New P value
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 84
P value Description Value Range
P6779 <New P value> Value = 0; Normal
EHS Headset Ring Value = 1; Plantronics EHS
Tone
Default
Normal
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 85
FIRMWARE VERSION 1.0.7.81
PRODUCT NAME
GXP2130, GXP2140, GXP2160, GXP2170 and GXP2135
DATE
09/06/2016
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware
version or lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version
or lower is not supported.
This release restored the Weather service. Part of the change requires users who are
using
“Self-Defined City Code” to change their setting. The upstream content provider has changed the API to yield a free-style search based on this argument instead of mapping to a specific code being used before. Hence the city being displayed would have been
incorrect. These users should change this option to the name of the city, for instance：
“Dallas”; “Dallas, NC”; “Dallas, Scotland”; “Liverpool”; “Liverpool, NY”; “Liverpool, England”.
Note:
If you enter only the name of the city it’s going to go the best match. In the case of Dallas it would be Dallas, TX; and in the case of the Liverpool it would be Liverpool, England.
This release adds Predictive Dialing feature which included a required internal change. If you
downgrade from 1.0.7.81 to 1.0.7.25 you will lose the call history.
ENHANCEMENT
Added Support for local firmware upgrade [FIRMWARE LOCAL UPGRADE]
Added a web option to let user chose whether or not to display internet down warning window [SHOW
Added OPUS codec support [OPUS CODEC]
Added target softkey for dialing status [TARGET SOFTKEY]
Added Capability to allow DIAL softkey to dial the selected predictive dialing number under dialing state
Added target selection for transfer and conference in call screen [TARGET SELECTION]
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 86
Added Transfer destination should display who the call was referred by
Added support to accept Pvalue in string format for VPK mode configuration xml [PVALUE FOR VPK
MODE IN STRING FORMAT SUPPORT]
Added predictive dialing using call history entries [PREDICTIVE DIALING]
Added more numbers per contact and “Company” ”Title” ”Job” Field on the Phonebook [MULTIPLE
NUMBERS AND OTHER INFO FOR ONE CONTACT SUPPORT IN PHONEBOOK]
Added pre-Dialing search to include Broadsoft directories [PREDICTIVE DIALING SEARCH SUPPORT]
Added search feature on Broadsoft directories [SEARCH FROM BROADSOFT DIRECTORIES
BUG FIX
Fixed Time Zone on status page does not show correctly sometimes
Fixed LCD brightness set as active issue when DHCP renew and other network connection
Fixed BLF lights remain RED/GREEN after hung up issue when using LED Pattern reserved RED/GREEN
Fixed Adding path / to server prefix will cause phone get stuck issue when downloading ringtone
Fixed
Phone does not keep assigned VLAN via LLDP issue
Fixed
Phone couldn't obtain IP after switching from LLDP to common network circumstance issue
Fixed Phone gets stuck in Downloading firmware file page issue after uploading firmware then unplug net cable
Fixed Accounts disappeared after connect/disconnect extension board
Fixed MUTE LED turned off sometimes when switching to home screen (during a call when mute is on)
Fixed Device TFTP upgraded abnormally in LLDP network environment
Fixed LCD couldn't enter into screensaver status after timeout
Fixed In BLF auto-provision, even if we choose the startpoint to be ext, it also shows on LCD on bootup sometimes
Fixed GXP2140 cannot transfer using BLF issue
Fixed Set "sort Results" option of LDAP web page to "yes" does not take effect
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 87
Fixed Issues with call park with Freeswitch on 1.0.7.X (While on active call only)
Fixed device generated core dump for gs_gui on web page
Fixed SIP log sent through syslog got truncated
Fixed loud sound/noise is played when there is audio packets loss using G 729 audio codec
Fixed when call Initiated within XML APP, suppress change to default phone screen
Fixed phone stucked at base download when using LLDP-MED.
Fixed Broadsoft phone book contact details string and formatting issue
Fixed Broadsoft XMPP: contact list display "Unknown Contact"
Fixed phone loss of register every 32 minutes due to failing to resolve DNS
Fixed incoming multicast paging drops the actual ringing call
Fixed all MPK values disappear from web GUI when one of them containing a double quote
Enabled weather support using new yahoo API
Fixed status of auto provision Eventlist BLF VPK/MPK showed wrongly when monitored Eventlist has parking lot extension
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user’s point of view.
FIRMWARE LOCAL UPGRADE
Functionality
User could upload the new firmware by pressing Start, then a new pop-up windows will show like following.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 88
After selected the correct firmware file from local storage, the phone will start the firmware upgrade automatically.
Web Configuration
The users could find this new feature under phone’s web UI-> Maintenance->Upgrade and Provisioning.
OPUS CODEC
Web Configuration
The users could find OPUS codec available under phone’s web UIAccountAudio Settings.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 89
When provisioning the phone with vocoder P value, the value to set codec as OPUS is 123.
TARGET SOFTKEY
Functionality
User can find the new target softkey for transfer status. When user pressed transfer softkey during a call.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 90
User could press the Target Softkey:
The LCD will lead to a page showing
“Local Phonebook”, “LDAP Directory”, “Local Call Log” and “Smart
VPK Target
” that the user could select and proceed the call transfer.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 91
SHOW INTERNET DOWN MESSAGE
Functionality
This document provides a solution for customers who mainly use the intranet without connecting to the internet. Originally, if the inte rnet is down, there will be a warning window displaying “Internet Down” message, user cannot operates the phone with the warning window display.
This design will provide following functionality.
User can chose whether or not to display the “Internet Down” message based on their environment settings.
Phone can still be operated even when the internet is not connected.
Web Configuration
The users could find OPUS codec available under phone’s web UIMaintenanceSyslogShow Internet
Down Message.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 92
Examples
Under Idle Screen:
A warning window will display if “Show Internet Down Message” is enabled
A warning window will not display if “Show Internet Down Message” is disabled.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 93
Under Call Screen:
None
TARGET SELECTION
Functionality
With this new feature, users can realize the following function:
1) Add a new softkey "Target" under transfer/conference action page.
2) When click on the softkey, it will take user to a target selection page in which user can choose other possible transfer/conference targets (e.g. Local/BS Phonebook, Local/BS Call History, LDAP,
Smart VPK List, or connected lines)
3) When accessing Local/BS Phonebook and Local/BS Call History page, the softkey will show limited options (e.g. Dial) when phone is under busy state to make it easier for user to perform the dialing task.
4) When accessing Smart VPK List, we will display the list of the VPK targets which are allowed to be used as the transfer/conference target based on the current account.
5) When accessing Line, we will list the lines which are available to be used for transfer/conference.
Examples
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 94
a) Under Transfer/Conference screen
A new softkey “Target” is added under transfer/conference action page.
When click on the softkey, it will take user to a target selection page in which user can choose other possible transfer/conference targets. b) Under target selection page screen
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 95
Target selection page provides a list of possible transfer/conference targets.
User can use UP/DOWN key to select target from list and use MENU key or “Select” softkey to choose the target.
By selecting Local/Broadsoft Phonebook, Local/Broadsoft Call Log and LDAP Directory, LCD will display according menu page. Also, in these pages, softkey will show limited options (e.g. Dial) to make it easier for user to perform the dialing task.
By selecting “Smart VPK Target”, a list of available VPK for transfer/conference will be shown as bellow.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 96
User can use UP/DOWN key or “select” softkey to choose item to use.
Available VPK contains VPK with mode as below:
Speed Dial (current account)
Speed Dial via Active Account (any account)
BLF or Eventlist BLF (current account)
Presence (current account)
Specially, for BLF/Eventlist BLF/Presence, an icon with status will be shown on the left side of the item.
Icon here contains 3 types based on monitoring state:
Unknown : Question Mark
Busy : RED
Available : GREEN
By selecting “line”, a list of available line for transfer/conference will be shown as bellow. User can use
UP/DOWN key or “select” softkey to choose item to use.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 97
TRANSFER FROM INFOMATION
Functionality
With this new feature, users can see who transferred the call to them. Example shows below:
The information of the Transferred From can be found in the “Referred-by” Header from SIP INVITE.
PVALUE FOR VPK MODE IN STRING FORMAT SUPPORT
Functionality
User can use the actual Virtual Multi-Purpose Key Mode in configuration xml or the Pvalue. The current
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 98
mode string and Pvalue are as follows:
Mode Name
None
Mode String none
LINE
Busy Lamp Field (BLF) line blf
0
1
Mode Pvalue
-1
Presence Watcher
Eventlist BLF presencewatcher eventlistblf
Speed Dial via Active
Account speeddialaa
Dial DTMF
Voice Mail
Call Return
Transfer
Call Park
Monitored Call Park
Intercom
LDAP Search dialdtmf voicemail callreturn transfer callpark moniteredcp intercom ldapsearch
2
3
4
7
8
5
6
9
16
10
11
Multicast Paging
Record
Call Log
Menu multicastpaging record calllog menu
13
14
15
17
The string could be capital or lower case letters, but there must no
“space” in between. For example in the cfg.xml, “<P1367>Line</P1367>” or “<P1367>line</P1367>” is the same as “<P1367>0</P1367>, it will configure Virtual Multi-Purpose Key 3 as Line mode.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 99
PREDICTIVE DIALING
Functionality
Phone can look into call history entries and if entered digits match some call history entries, list of entries should be displayed with corresponding names.
MULTIPLE NUMBERS AND OTHER INFO FOR ONE CONTACT SUPPORT IN PHONEBOOK
Functionality
User can add Phone type in phonebook.
xml to add other phone type besides existing “Work”,”Home” and
“Cell”. Here is an example for the phonebook.xml:
<AddressBook>
<Contact>
<id>1</id>
<FirstName>abc</FirstName>
<LastName>def</LastName>
<JobTitle>jobtitle</JobTitle>
<Frequent>0</Frequent>
<Phone type="haha">
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 100
<phonenumber>4444</phonenumber>
<accountindex>0</accountindex>
</Phone>
<Phone type="xixi">
<phonenumber>5555</phonenumber>
<accountindex>0</accountindex>
</Phone>
<Phone type="Work">
<phonenumber>1111</phonenumber>
<accountindex>0</accountindex>
</Phone>
<Phone type="Home">
<phonenumber>2222</phonenumber>
<accountindex>0</accountindex>
</Phone>
<Phone type="Cell">
<phonenumber>3333</phonenumber>
<accountindex>0</accountindex>
</Phone>
<Primary>1</Primary>
<Department>department</Department>
<Job>job</Job>
<Title>title</Title>
<Company>company</Company>
</Contact>
</AddressBook>
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 101
On the display of the contact on LCD of the phone will shows as follows:
User can also input the “Company” “Title” “Job” filed through the phonebook.xml in the previous example or on the LCD of the phone like following example:
PREDICTIVE DIALING SEARCH SUPPORT
Web configuration
A user has to configure Broadsoft XSI directories correctly from Web. The Web configuration path is as follows: Settings
–> Broadsoft –> Broadsoft XSI.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 102
Functionality
Phone can predict possible contact information from Broadsoft XSI directories when a user dials number.
User can select the predictive dialing number to dial out even when user doesn
’t key in the complete number.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 103
Predictive numbers will be shown if Broadsoft XSI directory information is loaded after pressing the related number.
SEARCH FROM BROADSOFT DIRECTORIES SUPPORT
Functionality
User can search from the Broadsoft directories when the user input the search content in the search form.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 104
The matching list will show as follows:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 105
FIRMWARE VERSION 1.0.7.25
PRODUCT NAME
GXP2130, GXP2140, GXP2160, GXP2170 and GXP2135
DATE
05/10/2016
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware
version or lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version
or lower is not supported.
ENHANCEMENT
Added support for Broadsoft XSI authentication type [BROADSOFT XSI AUTHENTICATION TYPE
A dded support to configure Broadsoft XSI SIP authentication method by selecting the account
[CONFIGURE BROADSOFT XSI SIP AUTHENTICATION METHOD]
Added support to stop Screensaver when VPK is active
Improve Auto-provision for Vonage server
Added option to disable Auto Location Service from IpVideoTalk server [ENABLE/DISABLE AUTO
LOCATION SERVICE FROM IpVideoTalk SERVER]
Added supports for secondary NTP server [SECONDARY NTP SERVER]
Added the ability to specify Eventlist BLF listening transport protocol which will allow the phone to listen on the incoming notify for the Eventlist through different transport protocol than the one used by SIP
[EVENTLIST BLF LISTENING TRANSPORT PROTOCOL]
Added support to play sound notification when one or more monitored BLF is ringing [SOUND
Added support to populate configurable User Agent field [USER-AGENT PREFIX]
MODEL-SPECIFIC CONFIGURATION FILE]
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 106
Added support to remove audio codec information on call screen [HIDE VOCODER]
Added support of BLF call pickup with Barge-In option [CALL PICKUP BARGE-IN OPTION]
Added option to control Speakerphone RX gain [SPEAKERPHONE RX GAIN CONTROL]
Added support to display status detail when Ethernet not connected, account not register or configured
Added support of IEEE-48-addr and IEEE-EUI-64 in PEI header [SUPPORT FOR IEEE-48-ADDR AND
Added support to allow partial match using STAR code In Broadsoft XSI search [PARTIAL MATCH IN
Added support to filter out invalid symbols (ex. brackets, hyphen) from dialed numbers [FILTERING
Added support to populate the WAN access node in SIP PANI head [SUPPORT FOR POPULATING
Added ability to allow user to specify which number to dial from LDAP results [DIAL FROM LDAP
Added DNS SRV Fail-over Mode option support [DNS SRV FAIL-OVER MODE]
Added Conference CEI to support UCM conference change
Added separate subscription expire options for each account [SEPARATE SUBSCRIPTION
Added more information on info popup window [LCD POPUP WINDOW]
BUG FIX
Fixed Phone cannot hang up after performing Blind Transfer in speaker mode
Fixed that GUI crashed after kicking UCM conference participant
Fixed that if the proxy does NOT respond with Proxy DNS SRV it will jump back after 1 registration
Fixed that during SIP fail over due to no response from the server the device does not do a DNS lookup for the SIP proxy domain
Fixed that if the proxy responds with 503 it will not fail over to the next IP in the DNS SRV
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 107
Fixed VONAGE-GUI crashed after manually configure Eventlist BLF
Fixed that call will be drop automatically by the phone after 45 sec when phone accomplishes an attended transfer and receive a call after that
Fixed that Broadsoft XSI app can't establish secure connection
Fixed that blind transfer ignores the pattern destinations specified in the dial plan
Fixed that device does not displaying Name field in missed calls if Call waiting is disabled
Fixed that phone keeps sending SIP instance ID after changing its value to NO unless phone is rebooted.
Fixed that NAPTR/SRV mode in DNS does not work
Fixed phone rejects messages from known proxy when proxy is cleared from DNS cache
Fixed phone rejects OPTIONS/UPDATE from known server when the option Accept Incoming SIP from
Proxy only is enabled
Fixed that CallPark Softkey works intermittently
Fixed web GUI Edit/Delete operations fail issue when performing on contacts which appear on search results
Fixed that Auto provision Eventlist BLF does not work with Broadsoft servers
Fixed that Auto Provision Eventlist BLF must be filled with EXT field from XML
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user’s point of view.
BROADSOFT XSI AUTHENTICATION TYPE SUPPORT
Web Configuration
This option can be found under device web UI->Settings->BroadsoftBroadsoft XSI.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 108
Functionality
This option is used to provide SIP Authentication option for Broadsoft XSI. Configure the SIP Credentials and select SIP Credentials as XSI Authentication Type. Phone will offer SIP Credentials when connecting to Broadsoft XSI.
New P Values
Pvalue
P6772
Description Value range
<New Pvalue>
Pvalue to set SIP UserName for
Broadsoft XSI
String
Default
None
P22034 <New Pvalue>
Pvalue to set SIP User ID for
Broadsoft XSI
String None
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 109
P6773 <New Pvalue>
Pvalue to set SIP Password for
Broadsoft XSI
String
P22054 <New Pvalue>
Pvalue to set XSI Authentication Type for Broadsoft XSI
0 for Login Credentials
1 for SIP Credentials
None
0
CONFIGURE BROADSOFT XSI SIP AUTHENTICATION METHOD
Web Configuration
User can use Authenticate ID and Authenticate Password as SIP Username and SIP Password respectively account this feature from Web configuration
In Accounts Tab -> Account # -> General Settings:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 110
Authenticate ID and Authenticate Password must be configured if a user select that account for accessing
Broadsoft XSI Directory and Call Log.
In Settings Tab -> Broadsoft -> Broadsoft XSI Settings, Users need to configure Server Path, Port, account number, SIP User ID and enable the XSI directories they would like to access.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 111
Functionality
This new method for Broadsoft XSI authentication is selecting SIP account instead of manually input SIP
Username and SIP Password. By this way, users can save time on configuration.
Phone can retrieve Authenticate ID and Authenticate password information from the selected account and use them as SIP credential for accessing Broadsoft XSI Directory and Call Log information.
Check functionality under Menu Screen: when all required information are set, Broadsoft Phonebook option will appear in Contacts tab.
Broadsoft Call Log option will appear in Call History tab.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 112
Changed P Values
P value Description Value range Default
P22054 <Changed Pvalue>
Pvalue to set XSI Authentication Type for Broadsoft XSI
2 to 7 for SIP Credentials of account 1 to 6.
0
ENABLE/DISABLE AUTO LOCATION SERVICE FROM IpVideoTalk SERVER
Web Configuration
This option can be found under device web UI->SettingsWeb service:
Functionality
User could enable or disable auto location services on the phone to decide whether phone could get the
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 113
location information from IPVideoTalk service server. Reboot required to take effect.
In the original design, the phone will automatically send DNS request to IPVideoTalk server for location information at phone booting.
The option give users a choice to disable auto location feature. If users disable the service, the phone will stop sending DNS request for location information. It can reduce network traffic and speed up the provisioning process as well.
To check the functionality, we use Wireshark to trace DNS packets.
When Use Auto Location Service option is set as Yes, user can find DNS request send to service.ipvideotalk.com.
When Use Auto Location Service option is set as No, after rebooting the phone, user can find out there is no DNS request send to service.ipvideotalk.com in the Wireshark trace.
New P Values
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 114
Pvalue Description Value range
P8338 <New Pvalue> 0: No
Pvalue to disable or enable Auto
Location Service
1: Yes
Default
1
SECONDARY NTP SERVER
Web Configuration
User can find the new option at Web configuration Settings Preferences-->Date and Time.
Functionality
New design will improve current NTP server’s behavior in two ways bellow.
GXP should try all of the IP address that DNS server provided. Previously, GXP doesn’t try next IP in DNS resolution if there is no response from current IP.
Allow user to configure 2 NTP server domain names. GXP will loop through all of the IP addresses resolved from them.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 115
EVENTLIST BLF LISTENING TRANSPORT PROTOCOL
Web Configuration
User can find the new option at Web configuration SettingsAccountsAccount NumberSIP Settings
Basic Settings.
Functionality
Based on option “SIP Transport” and new option “SIP Listening Mode”, GXP will decide which transport protocol it should listening to from the incoming request.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 116
SIP
Transport
UDP
Mode
SIP
Listening Mode
Transport Only
TCP TLS/TCP
Accept incoming request using UDP.
All outgoing request will go out using UDP.
Accept incoming request using TCP.
All outgoing request will go out using TCP.
Accept incoming request using TLS/TCP.
All outgoing request will go out using TLS/TCP.
Dual
Dual (Secured)
Accept incoming request using both TCP
Accept incoming request using both TCP
- and UDP.
All outgoing request will go out using UDP. and UDP.
All outgoing request will go out using TCP.
Accept incoming request using both
TLS/TCP and UDP.
All outgoing request will go out using UDP.
- Accept incoming request using both
TLS/TCP and UDP.
All outgoing request will go out using TLS/TCP.
Dual
Enforced)
(BLF
Accept incoming request using both TCP and UDP.
All outgoing request will go out using UDP except for
BLF/Eventlist the subscription the phone will add Transport=TCP into the contact header.
Accept incoming request using both TCP and UDP.
-
All outgoing request will go out using TCP except for
BLF/Eventlist the subscription the phone will add Transport=TCP into the contact header.
New P values
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 117
Pvalue Description Value range
P26024
P26124
<New Pvalue>
Pvalue to set SIP Listening mode for
P26224 each account Pvalue to disable or enable Auto Location Service
0: Transport Only
1: Dual
2: Dual (Secured)
P26324 3: Dual (BLF Enforced)
P26424
P26524
Default
0
SOUND NOTIFICATION
Web Configuration
User can find the new option at Web configuration SettingsCall Features.
Functionality
New options added to allow user to enable sound and LCD notification when one or more monitored BLF is ringing.
By Enable BLF Pickup Screen, when monitored BLF is ringing, GXP should pop up a BLF information window.
By Enable BLF Pickup Sound, when monitored BLF is ringing, GXP should play a sound to inform user.
New P Values
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 118
P value
P9906
Description
P9905 <New P value>
Pvalue to enable BLF pickup screen
<New P value>
P value to enable BLF pickup Sound
Value range
0 or 1
0: No
1: Yes
0 or 1
0: No
1: Yes
Default
0
0
USER-AGENT PREFIX
Web Configuration
User can find the new option at Web configuration Settings
Call Features. A new option “User-Agent
Prefix” is added
Functionality
Add a new option for input the user agent field with operator configurable value or value that identifies the device. The option should be configurable to give the end point device specific identification. Ex. The value could be Mobile, Fixed, Desktop, and etc. The configured User Agent should be prepend to vendor’s default
User
The new design can be briefly summarized as bellow.
A new P value will be assigned to set User-Agent Prefix. User will be able to configure this option through
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 119
web, or configuration file. The Prefix User-Agent configured will be prepend to default user Agent.
For example, default User-Agent field: Grandstream GXP2170 1.0.7.25
User-Agent Prefix: Work-Phone
New User-Agent field: User-Agent: Work-Phone Grandstream GXP2170 1.0.7.25
To check the functionality, we make a phone call from DUT and check the SIP INVITE message sent out.
Before setting User-Agent Prefix
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 172.18.21.34:5060;branch=z9hG4bK669509149;rport
From: "742" <sip:[email protected]>;tag=1287565619
To: sip:[email protected]
Call-ID: [email protected]
CSeq: 20 INVITE
Contact: "742" sip:[email protected]:5060
Max-Forwards: 70
User-Agent: Grandstream GXP2170 1.0.7.25
Supported: replaces, path, timer
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE,
MESSAGE
Content-Type: application/sdp
Accept: application/sdp, application/dtmf-relay
Content-Length: 210
….
After setting User-Agent Prefix to Work-Phone
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 120
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 172.18.21.34:5060;branch=z9hG4bK252838042;rport
From: "742" <sip:[email protected]>;tag=85821971
To: sip:[email protected]
Call-ID: [email protected]
CSeq: 31 INVITE
Contact: "742" sip:[email protected]:5060
Max-Forwards: 70
User-Agent: Work-Phone Grandstream GXP2170 1.0.7.25
Supported: replaces, path, timer
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE,
MESSAGE
Content-Type: application/sdp
Accept: application/sdp, application/dtmf-relay
Content-Length: 210
….
New P Values
P value Description
P8358 <New P value>
P value to set User-Agent Prefix
Value range
String
Default
NONE
REQUEST MODEL-SPECIFIC CONFIGURATION FILE
Functionality
Add model specific configuration file to be requested during the provisioning process.
For example: When GXP2170 request the provisioning files it needS to also request the following file: cfggxp2170.xml.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 121
HIDE VOCODER
Web Configuration
User can find the new item at Web configuration Accounts Account Number Audio Settings. A new option “Hide Vocoder” is added.
Functionality
To check the functionality, we establish a phone call from DUT and check the call screen.
When option Hide Vocoder is set as No, user can check the codec on the call screen as bellow.
When option Hide Vocoder is set as Yes, the coded will be hidden from call screen as bellow.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 122
New P Values
P value Description Value range
P26047
P26147
P26247
P26347
P26447
P26547
<New Pvalue>
Pvalue to set Hide Vocoder for account
1-6
Number, 0 or 1
No:0
Yes:1
Default
0
CALL PICKUP BARGE-IN OPTION
Web configuration
We take Broadsoft service server configuration for example:
Enable BLF Eventlist function: Configuration Path: Group Users Client Applications Busy Lamp
Field
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 123
The information List URI sip and Monitored Users field will be configured in Grandstream Phone.
Check Call Pickup with Barge-in code: Configuration Path: Group User Utilities Feature Access
Codes
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 124
Based on Broadsoft Service server, the default Feature Access Code for Directed Call Pickup With Bargein is *33. This information will be configured in Grandstream Web Setting Accounts Account # SIP
Settings Advanced Features
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 125
Configure Eventlist BLF for one of monitored extension in Visual MPK
Functionality
This new feature will provide the following functionality:
Allow users to dial a feature access code (FAC) followed by an extension number to pick up or barge-in a call to the monitored extension.
If the monitored extension is ringing state (LED indicator is flashing red), a user can pick up that call before the call is answered by monitored side.
If the monitored extension is in talk (LED indicator is solid red), a user can barge-in that existing call. That is, monitored side will release the call, the barge-in user become the controller of this call. When a bargein occurs and the user’s warning tone is enabled on server side, a user would hear barge-in warning tone.
Monitored Extension 2409991429 is Call Ringing State
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 126
Monitored extension 2409991429 is busy, which is on talk state
In the above two states, User can use Call Pickup with Barge-in by pressing the key, which is configured as Eventlist BLF function key.
When the phone performs Call Pickup with Barge-in, the call screen would be likes as the follow image and the user might hear the warning tone if the function is enabled.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 127
New P Values
Pvalue Description
P26046 Call Pick up with Barge-In Code
P26146
P26246
P26346
P26446
P26546
Value range
String
Default
NONE
SPEAKERPHONE RX GAIN CONTROL
Web Configuration
User can find the new item at Web configuration Settings Preferences--> Ring Tones Speaker, Ring
Volume option is added.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 128
Functionality
User can configure speaker ring volume. The valid range is 0 to 7. The speaker ring volume will change after applying the changes.
New P Values
P value Description
P8352 <New P value>
P value to set speaker ring volume
Value range
0 to 7.
Default
5
STATUS DETAIL DISPLAY
Functionality
User can see more accurate display on LCD when Ethernet is not connected, account is not registered or configured.
1) Network Down:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 129
2) No Cable:
3) Internet Down:
4) Account is not registered:
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 130
Detailed warning window display condition can be summarized as bellow.
No Bluetooth Handsfree connected:
--Network Down or Cable not connected
Loading popup window will be displayed indicates “Network Down” or “No LAN Cable”.
Config Softkey: Visible when Keypad
Menu mode is not “basic settings only”.
-- Internet Down and no account registered (Incorrect configuration of DNS will lead to Internet Down)
Loading popup window will be displayed indicates “Internet Down”.
Config Softkey: Visible when Keypad Menu mode is not “basic settings only”.
DirectIP Softkey: Visible when direct IP call is not disabled.
Network Softkey: Always visible to check network status.
-- Internet Down and has account registered
Popup window will be closed.
With Bluetooth Handsfree connected:
No network related warning window will be displayed.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 131
For Hard key handling during network warning window shown:
-- Menu key: User can access menu module.
-- Phonebook key: User can access Phonebook module.
-- Other keys are blocked.
PARTIAL MATCH IN BRAODSOFT XSI SEARCH
Functionality
Added supports for searching partial match for the phonebook entry by adding STAR code in Broadsoft XSI search.
Type a string contained for a search field, for exa mple “TE” in First Name field of Broadsoft XSI search.
Phone will send the following:
[email protected]/directories/group?lastName=&firstName=*TE*&number=
This will help to displayed all the entry with first name including “TE”.
FILTERING OUT INVALID SYMBOLS
Functionality
When dialing contact number either from local Phonebook or LDAP book which contains some characters like '(' or ')' or spaces and dashes, the call will be established and these characters will be removed before sending digits.
For example:
When creating phonebook or use LDAP contact with a number in the following form "(234) 567-8901". Make a call from phonebook or LDAP book contact, 2345678901 will be sent out.
SUPPORT FOR IEEE-48-ADDR AND IEEE-EUI-64 IN PEI HEADER
Functionality
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 132
Add support of IEEE-48-addr and IEEE-EUI-64 in SIP header for emergency calls. Phone will populate the
IEEE-48-addr, IEEE-EUI-64 (Example: IEEE-EUI-48; eui-48-addr=00-02-3F-1F-B2-42) in the PEI (Pemergency info) SIP header.
From Wireshark, we could find this info in PEI Invite SIP header
SUPPORT FOR POPULATING THE WAN ACCESS NODE IN SIP
Functionality
Phone will include the MAC of Access Point in P-Access-Network-Info header. From Wireshark, we could find this info in P-Access-Network-Info header.
DIAL FROM LDAP RESULTS
Functionality
Add the support let the user could dial the selected number from the LDAP results.
Configure the phone with correct LDAP info, then fill Name attribute with a value, such as CallerID
Name, and Number attribute with Account Number, Mobile Number, Home Number etc. Make an LDAP search on the phone. Select an Entry, then press Dial Soft Key. Phone will show a screen to let user select the number to call from LDAP entry attributes.
DNS SRV FAIL-OVER MODE
Web Configuration
User can find the new option at Web configuration ACCOUNTS ->Account 1(1-6) ->Network Settings
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 133
Functionality
The option will decide which IP is going to be used in sending SIP packets after IPs for SIP server host are resolved with DNS SRV. When a phone sends register sip requests, the phone will resolve the configured
SIP server via DNS SRV. Normally, this will result in multiple IP address.
Regardless of which option set, it will try to send register messages to one IP at a time for each IP until it receives response. Then the phone is going to be registered with the server that received responses.
However, its renewal registration will be sent to IP based on the configured option.
If the option is set with "default", it will again try to send register messages to one IP at a time, and the process repeats.
If the option is set with "Saved one until DNS TTL", it will send register messages to the previously registered IP first. If no response, it will try to send one at a time for each IP. This behavior lasts as long as
DNS TTL (time-to-live) is up.
If the option is set with "Saved one until no responses", it will send register messages to the previously registered IP first, but this behavior will persist until the registered server does not respond.
New P Values
P value Description Value range Default
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 134
P26040 Account 1: P value to DNS
SRV Fail-over Mode
P26140 Account 2: P value to DNS
SRV Fail-over Mode
P26240 Account 3: P value to DNS
SRV Fail-over Mode
P26340 Account 4: P value to DNS
SRV Fail-over Mode
P26440 Account 5: P value to DNS
SRV Fail-over Mode
0: Default
1: Saved one until DNS TTL
2: Saved one until no response
0
0: Default
1: Saved one until DNS TTL
2: Saved one until no response
0
0: Default
1: Saved one until DNS TTL
2: Saved one until no response
0
0: Default
1: Saved one until DNS TTL
2: Saved one until no response
0
0: Default
1: Saved one until DNS TTL
2: Saved one until no response
0
P26540 Account 6: P value to DNS
SRV Fail-over Mode
0: Default
1: Saved one until DNS TTL
2: Saved one until no response
0
SEPARATE SUBSCRIPTION EXPIRATION TIMER
Web Configuration
User can find the new option at Web configuration ACCOUNTS Account 1(1-6) SIP SettingsBasic
SettingsSubscribe Expiration
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 135
Functionality
New design separate expiration timer between registration and subscription. This will reduce unnecessary network traffic.
New P Values
Default
60
P value Description Value range
P26051 Account 1: P value to set
Subscribe Expiration
0-64800(minutes)
P26151 Account 2: P value to set
Subscribe Expiration
0-64800(minutes)
P26251 Account 3: P value to set
Subscribe Expiration
0-64800(minutes)
P26351 Account 4: P value to set
Subscribe Expiration
0-64800(minutes)
60
60
60
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 136
P26451 Account 5: P value to set
Subscribe Expiration
0-64800(minutes)
P26551 Account 6: P value to set
Subscribe Expiration
0-64800(minutes)
60
60
LCD POPUP WINDOW
LCD info popup window
In addition to IP Setting and IP Address, more information including MAC address and Software Version were added into info popup window.
Functionality
Same as original design, user can press “UP” key to show Info popup window and press Dismiss to close the window. A new softkey “More” is added to bring user to Status menu page directly.
DIAL PLAN { x+ | \+x+ | *x+ | *xx*x+ }
The original default dial plan value was { x+ | *x+ | *xx*x+ }, even there was no “\+x+” included, the phone still allowed dialing any number with a leading +. We fixed this issue on this version, and added r ule “\+x+” to represent “dialing any number with a leading +”. The new default dial plan value is changed to
{ x+ |
\+x+ | *x+ | *xx*x+ } accordingly, the explanation for this default dial plan are as follows:
Allow any number of digits, OR any number with a leading +, OR any number with a leading *, OR any number with a leading * followed by a 2 digits number and a *.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 137
Note:
In this version, user need to reset to new default dial plan value or add “\+x+” to dial plan to allow “ dialing any number with a leading +
”, to dial + from keypad, press on 0 until + appears on LCD.
Reset to default on Web Accounts Account Number Call Settings:
Changed P Values
P Value Description
P290
Value range
Account 1: Pvalue to set Dial
Plan
String
P459
P559
P659
P1759
P1859
Default
{ x+ | \+x+ | *x+ |
*xx*x+ }
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 138
FIRMWARE VERSION 1.0.7.15
PRODUCT NAME
GXP2130, GXP2140, GXP2160, GXP2170 and GXP2135
DATE
03/12/2016
IMPORTANT UPGRADING NOTE
For GXP2130/2140/2160, once upgraded to 1.0.7.15, downgrading to 1.0.5.x firmware version or
lower is not supported.
For GXP2170/2135, once upgraded to 1.0.7.15, downgrading to 1.0.6.9 firmware version or lower
is not supported.
ENHANCEMENT
Added support for No Touch Provisioning to prompt for username and password for XML config file
download for Broadsoft server [NO TOUCH PROVISIONING]
Changed the default provisioning protocol to HTTPS. This option “Upgrade via” is under phone’s web
UI->Maintenance->Upgrade and provisioning.
Added support for outbound notification [OUTBOUND NOTIFICATION SUPPORT]
Added support for Virtual Multi-Purpose Keys [VIRTUAL MULTI-PURPOSE KEYS SUPPORT]
Added support to show programmable keys status on web UI [PROGRAMMABLE KEYS STATUS ON
Added option “Auto Provision List Starting Point” on web UI [AUTO PROVISION LIST STARTING
Added additional ability to customize DHCP option for provisioning server [ADDITIONAL OVERRIDE
Added support for iLBC and G723 [ILBC AND G.723.1 SUPPORT]
Added options for G723 rate, iLBC frame size and payload type [ILBC AND G.723.1 SUPPORT]
Added option to enable and disable session timer [ENABLE SESSION TIMER]
Added option to ring speaker for call waiting [RING SPEAKER FOR CALL WAITING]
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 139
Added configurable backlight timer [CONFIGURABLE BACKLIGHT TIMER]
Added color background wallpaper selection [COLOR BACKGROUND WALLPAPER SELECTION]
Added BLF LED Pattern Explanation Form on web UI [BLF LED PATTERN EXPLANATION IN WEB
Disable screen saver when VPK is active [DISABLE SCREENSAVER WHEN VPK IS ACTIVE]
Added fully black support for the idle screen LCD brightness (i.e., allow idle brightness to be 0) [
SUPPORT FOR IDLE LCD BRIGHTNESS ]
Add Blind and Attended Transfer softkey options [ BLIND TRANSFER AND ATTENDED TRANSFER
Add ability to display SIP MESSAGE text on LCD [
DISPLAY SIP MESSAGE TEXT ON LCD
BUG FIX
Fixed Line keys’ LED doesn't provide visual indications of Shared call appearances
Fixed GXP2170 Call Center Guest Login box does not display the cursor
Fixed VPK does not change status if manually configure Eventlist BLF
Fixed Line LED doesn't light up in transferring page
Fixed Line LED turns off after pressing Home softkey in NO RESPONSE call page
Fixed Line LED turns off after switching to home screen then entering other screen during the call
Fixed GXP2130/40/60’s some VPK modes doesn't work or display in LCD
Fixed LCD does not respond after off-hook at the broken network state
Fixed Preferred vocoder could be reset after device factory reset
Fixed Phone cannot auto answer by the call-info provided in certain scenarios
Fixed “Alert-Info” for ring tone is ignored
Fixed Phone doesn't update the CID when preforming auto-attended transfer
Fixed Phone keeps sending “SUBSCRIBE” after receiving “NOTIFY” with reason=noresource
Fixed Dialing screen display mobile number instead of home number
Fixed Transferred call logs do not display the name of the transferred number
Fixed Device works abnormal after pressing EHS headset key at the on-hook dialing screen
Fixed Bluetooth hands-free line flashes in red when there is no incoming call on the Bluetooth handsfree line
Fixed Bluetooth hands-free call screen displays “PrivateHold” softkey which should be invalid
Fixed Device uses Bluetooth hands-free line to call voicemail user ID
Fixed Plantronics EHS compatibility issue
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 140
Fixed “Confcall” softkey in Bluetooth hands-free line and SIP calls doesn’t work
Fixed Display language of softkeys on “Keypad Locking Password” box does not update
Fixed Time zone string is incorrect for New Foundland, Canada
Fixed Instant message is displayed abnormally
Fixed Audio is cut off in the beginning of the outgoing RTP stream when receiving an incoming call
Fixed Phone failed to retrieve the parked call through the call park feature
Fixed Phone lost network access when enabling LLDP/LLDP-med
Fixed Phone is not recognized by some TP-LINK switch using LLDP
Fixed “Confirm” softkey is displayed abnormally when deleting phonebook entry through dialing page
Fixed LCD does not jump to dialing screen after pressing “NewCall softkey” in the conference
Fixed Broadsoft IM&P feature that the phone uses wrong DNS query type
Fixed Extra route header on ACK request
Fixed Adding “Save confirmation” message when saving settings on phone GUI
Changed default dial plan to { x+ | \+x+ | *x+ | *xx*x+ }
NEW FEATURES OVERVIEW
This section lists major new features and describes how to use it from the user’s point of view.
NO TOUCH PROVISIONING
After the phone sends config file request to the Broadsoft provisioning server via HTTP/HTTPS, if the provisioning server responds 401 Unauthorized asking for authentication, the phone’s LCD will prompt a window for user to enter username and password. Once correct username and password are entered, the phone will send config file request again with authentication. Then the phone will receive the config file to download and get provisioned automatically.
Besides manually entering the username and password in LCD prompt, users can save the login credentials for provisioning process as well. The username and password configuration is under phone’s web UI-
>Maintenance-
>Upgrade and provisioning page: “HTTP/HTTPS Username” and “HTTP/HTTPS
Password”. If the saved username and password saved are correct, login window will be skipped.
Otherwise, login window will be popped up to prompt users to enter correct username and password again.
OUTBOUND NOTIFICATION SUPPORT
Outbound notification options can be found under device web UI->Settings->Outbound Notifications. In the web UI, there are three sections under Outbound Notifications:
“Action URL”, “Destination” and
“Notification”.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 141
Action URL
To use Outbound Notification->Action URL, users need to know the supported events and the dynamic variables for the supported events. The dynamic variables for the supported events will be replaced by the actual values on the phone in order to notify the event to SIP server.
Supported Events:
Setup Completed
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 142
Registered
Unregistered
Off Hook
On Hook
Incoming Call
Outgoing Call
Missed Call
Established Call
Terminated Call
Open DND
Close DND
Open Forward
Close Forward
Blind Transfer
Attended Transfer
Hold Call
UnHold Call
Supported Dynamic Variables
Dynamic Variable Description
$phone_ip
$mac
The IP address of the phone
The MAC address of the phone
$product
$program_version
$hardware_version
The product name of the phone
The software version of the phone
The hardware version of the phone
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 143
$language
$local
$display_local
$remote
The display language of the phone
The called number on the phone
The display name of the called number on the phone
The call number on the remote phone
$display_remote
$active_user
The display name of the call number on the remote phone
The account number during a call on the phone
After the user finishes setting Action URL on phone
’s web UI, when the specific phone event occurs on the phone, phone will send the Action URL to the specified SIP server. The dynmic variables in the Action URL will be replaced by the actual values.
Here is an example:
Configure the following Action URL on the phone
’s web UI->Settings->Outbound Notification->Actial URL:
Incoming Call:
Outgoing Call:
On hold:
172.18.24.103/mac=$mac&local=$local
172.18.24.103/remote=$remote&phone_ip=$phone_ip
172.18.24.103/program_version=$program_version
During incoming call, outgoing call and call hold, capture the trace on the phone and exam the packets. We can see the phone send Action URL with actual values to SIP server to notify phone events. In the following screenshot, from top to bottom, the phone events for each HTTP message are: Outgoing Call, Incoming
Call and On Hold in the format of the defined action URL with the parameters replaced with actual values.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 144
The P values listed in below table are for the options under phone web UI->Settings->Outbound
Notification->Action URL.
Value Format P Value
P8304
Web UI Option
Setup Completed
P8305
P8306
P8308
P8309
Registered
Unregistered
Off Hook
On Hook
String P8310
P8311
P8312
P8313
P8314
P8316
Incoming Call
Outgoing Call
Missed Call
Established Call
Terminated Call
Open DND
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 145
P8317
P8318
P8319
P8320
Close DND
Open Forward
Close Forward
Blind Transfer
P8321
P8324
Attended Transfer
Hold Call
P8325 UnHold Call
Destination
The options under phone
’s web UI->Settings->Outbound Notification->Destination configures outbound notification destination server information. Click on
“Add Destination” and users will see following window to configure destination server information.
The following table describes each option in the above interface.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 146
Destination Server Option
Destination Name
Protocol
Enable SSL
Description
Identify the destination name. It must be unique.
Configure the protocol associated with the destination server. Currently
XMPP and SMTP are supported.
Configure whether to use SSL to encrypt for SMTP protocol. This option is not editable for XMPP.
Configure destination server address, e.g., talk.google.com.
Configure destination server port, e.g., 5222.
Destination Address
Port
Domain
User Name
Password
Configure the destination server domain for XMPP protocol. This option is not editable for SMTP.
Configure the authorization user name of the destination server.
Configure the authorization user password for the destination server.
From
To
Extra Attribute Name
Extra Attribute Value
Configure the sender name for SMTP protocol. This option is not editable for XMPP.
Configure the receiver’s address.
Configure extra attribute’s name reserved for protocol specific attributes such as “jid” for XMPP protocol. If “jid” is specified, user name and domain will be overridden.
Configure extra attribute’s value reserved for protocol specific attributes such as “[email protected]” for “jid” of XMPP protocol. If it’s specified, user name and domain will be overridden.
Up to 10 destinations can be configured here. The P values are listed in below table.
P Value Destination Value Format
P9910
P9911
P9912
Destination 1
Destination 2
Destination 3
String. Each P value consists of all the options configured for this destination.
Example 1 - Destination 1 with protocol XMPP and 2 extra Attributes
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 147
P9913
P9914
P9915
P9916
P9917
P9918
P9919
Destination 4
Destination 5
Destination 6
Destination 7 configured:
P9910=serverName=destination1&protocol=XMPP&serverAddress=talk.go
ogle.com&port=5222&user=username1&password=password1&from=&to=t
o1&domain=gmail.com&extraAttrName1=extraAttrValue1&extraAttrName2=
extraAttrValue2
Destination 8
Destination 9
Destination 10
Example 2 - Destination 2 with protocol SMTP and 3 extra Attributes configured:
P9911=serverName=destination2&protocol=SMTP&serverAddress=smtps://
smtp.gmail.com&port=465&user=username2&password=password2&from=
username2&to=to2&domain=&extraAttrName1=extraAttrValue1&extraAttrN
ame2=extraAttrValue2&extraAttrName3=extraAttrValue3
The highlighted strings in above examples are the actual values configured in each field for the destination.
Notification
After configuring detination server, users can configure notification information under phone
’s web UI-
>Settings->Outbound Notification->Notification. Click on
“Add Notification” and users will see following window to configure notification.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 148
Notification Option
Event
Destination
Subject
Message
Extra Attribute Name
Extra Attribute Value
Description
Configure the event which will trigger an outbound notification.
Configure the name of the destination where the outbound notification will be sent to.
Configure the subject of Email notification. This option is only applicable to SMTP protocol and it’s not editable for other protocols.
Configure the message body or the outbound notification.
Configure extra attribute’s name reserved for specific attributes for a given notification in the future.
Configure extra attribute’s value reserved for specific attributes for a given
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 149
Event
Call_Missed notification in the future.
The message body of the notification for each event can be customized with dynamic attributes embedded.
The following table shows the mapping between event and dynamic attribute.
Dynamic Attribute Name
line account remoteNumber
Dynamic Attribute Description
Line number associated with the call
Account number associated with the call
The remote party number
DND
Call_Forward remoteName localNumber localName sipServer call-id time status callType
The remote party name
The local party number
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the missed call event occurs
This is for DND status. The value can be
“enabled” or
“disabled”
This is for the type of the call. The value can be
“incoming” or “outgoing” line account remoteNumber remoteName localNumber localName
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 150
OAM_Login
OAM_Lockout
Incoming_Call sipServer call-id time fwNumber fwReason
OAMUser
OAMLoginSource
OAMLoginFromIP
OAMLoginCode time
OAMUser
OAMLoginSource
OAMLoginFromIP
OAMLockoutCode
OAMLockoutTime callingNumber callType line account
The SIP server address of the account
The SIP dialog call ID
The timestamp when the call is forwarded
Call Forward destination number
Call Forward reason
OAM user name such as
“admin”
OAM login source. The value can be
“SSH” or
“WebGUI”
OAM login From IP address. The value is the IP address of the PC who will log in phone
’s web UI or
SSH
OAM login result code. The value can be
“succeeded” or “failed”
OAM login time stamp
OAM user name such as
“admin”
OAM login source. The value can be
“SSH” or
“WebGUI”
OAM login From IP address. The value is the IP address of the PC who will log in phone
’s web UI or
SSH
OAM lockout result code. The value can be
“locked” or
“unlocked”
OAM lockout time stamp
Calling party number
Type of the call. The value can be
“incoming” or
“outgoing”
Line number associated with the call
Account number associated with the call
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 151
Outgoing_Call remoteNumber remoteName localNumber localName sipServer call-id time callType
Call_Established line account remoteNumber remoteName localNumber localName sipServer time callType line account remoteNumber remoteName localNumber localName sipServer
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the incoming call event occurs
Type of the call. The value can be
“incoming” or
“outgoing”
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
The time stamp when the outgoing call event occurs
Type of the call. The value can be
“incoming” or
“outgoing”
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 152
Call_Terminated call-id startTime callType line account remoteNumber remoteName localNumber localName sipServer call-id startTime
Call_Forward_Status duration account
Call Hold forwardNumberAll forwardNumberBusy forwardNumberNoAns callType line account remoteNumber remoteName localNumber
The SIP dialog call ID
The time stamp when the outgoing call event occurs
Type of the call. The value can be
“incoming” or
“outgoing”
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the call is established
The call duration
The account number associated with the call forward status change
The forward number for Call Forward All
The forward number for Call Forward Busy
The forward number for Call Forward No Answer
Type of the call. The value can be
“incoming” or
“outgoing”
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 153
Call_Resume
Blind_Transfer localName sipServer call-id startTime callType line account remoteNumber remoteName localNumber localName sipServer call-id startTime line account remoteNumber remoteName localNumber localName sipServer call-id time transferName
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the call is on hold
Type of the call. The value can be
“incoming” or
“outgoing”
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the call is resumed
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
The SIP dialog call ID
The time stamp when the call is transferred
Transferred party name
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 154
Attended_Transfer transferNumber
Line account remoteNumber remoteName localNumber localName sipServer
Transferred party number
Line number associated with the call
Account number associated with the call
The remote party number
The remote party name
The local party number
The local party name
The SIP server address of the account
Register_Status call-id
Time transferName transferNumber registerStatus
The SIP dialog call ID
The time stamp when the call is transferred
Transferred party name
Transferred party number
Account register status. The value can be
“registered” or “unregistered”
Bootup_Complete N/A
The dynamic attributes in this row are common attributes that can be applied to all events mac phone_ip program_version hardware_version
N/A
MAC address of the phone
IP address of the phone
Software version of the phone
Hardware version of the phone
Product name of the phone product language Display language on the phone
All above dynamic attributes
’ value is generated by phone system and can be used as dynamic attribtues with a pair of curved braces around them. For example, if the message body is specified as following:
Your call from {remoteName}:{remoteNumber} to {localName}:{localNumber} was forwarded to
{fwdNumber} by reason {fwdReason}.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 155
Then the message received in the outbound notification will look like this:
Your call from Daniel:2070 to Jasmine:2071 was forwarded to 777777 by reason unconditional.
Only attributes in curved braces will be replaced by the run time value. Other content will remain the same as static text.
For each event, at most 3 notifications can be configured. In total, up to 75 notifications can be configured.
The P value for each notification is listed in below table.
P Value Notification Value Format
P9920
P9921
P9922
P9923
P9924
P9925
P9926
P9927
P9928
P9929
…
P9993
P9994
P9995
Notification 1
String. Each P value consists of all the options configured for this notification.
Notification 2
Notification 3
Example 1
– Notification 1 for event “Call_Missed” to destination 1, with 2 extra Attributes configured:
Notification 4
Notification 5
Notification 6
P9920=eventName=Call_Missed&destName=destination1&subject=&msg=
You have a missed call from {remoteName}:{remoteNumber} on Line {line}, account {account} at
{time}.&extraAttrName1=extraAttrValue1&extraAttrName2=extraValue2
Notification 7
Notification 8
Example 2
– Notification 2 for event “Incoming_Call” to destination 2, with 2 extra Attributes configured:
Notification 9
Notification 10
…
Notification 73
P9921= eventName=Incoming_Call&destName=destination2&subject=Incoming
Call Alert&msg=You have an {callType} call from
{remoteName}:{remoteNumber} on Line {line}, account {account} at
{time}.&extraAttrName1=extraAttrValue1&extraAttrName2=extraAttrValue2
Notification 74
Notification 75
The highlighted strings in above examples are the actual values configured
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 156
in each field for the notification.
VIRTUAL MULTI-PURPOSE KEYS SUPPORT
Web UI Configuration
Users can find new Virtual Multi-
Purpose Keys (VPK) configuration under phone’s web UI->Settings-
>Programmable Keysp->Virtual Multi-Purpose Keys tab. It is recommended to select “Reset” on this page before configuring VPK here. By default, all fixed VPKs are listed.
Click on “Edit VPK” for the line (fixed VPK) you would like to configure. A new window will pop up for VPK configuration. Users can configure Mode, Account, Description and Value for the VPK. Up TO 20 mode options can be selected for the VPK. Once done, press “Save” on this window and press “Save VPK” on the bottom of the Virtual Multi-Purpose Keys page again to apply the change.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 157
If users would like to configure more VPKs than the ones displayed on the page, the users can click on
“Add VPK” to configure dynamic VPK. The dynamic VPK supports up to 17 mode options.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 158
Please note:
1.
Dynamic VPK doesn’t support LINE and Shared LINE mode. These two mode options are only available for fixed VPKs.
2.
Dynamic VPK doesn’t support NONE mode. If users do not need this VPK, click on “Edit VPK” for it and select “Delete” to remove this VPK.
3.
All settings require user to click on “Save” on the prompted window and also “Save VPK” button on the bottom of Virtual Multi-Purpose Keys page to take effect.
LCD Indication and Configuration
The configured fixed VPKs are displayed next to the corresponding line. If dynamic VPKs are configured, the users can see a page number shown on the upper left corner on the LCD.
The following figures show page 1 and page 2 of the VPKs on LCD. Pressing “RIGHT” arrow key or “Next” softkey will switch to the next page; pressing “LEFT” arrow key will switch back to the preivous page.
The users could also edit and add VPK from LCD.
1. To edit (fixed) VPK, press and hold the line key for about 4 seconds, a configuration window will pop up for the user to configure.
2. To add (dynamic) VPK, press and hold the RIGHT arrow key for about 4 seconds, a configuration window will pop up for the user to configure.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 159
Up to 20 mode can be supported on fixed VPK and up to 17 mode can be supported on dynamic VPK.
Each mode is indicated by a different icon on the LCD and the icon will be different when in different status.
Please find the icon indications below for different mode of VPK.
Icon LED Status VPK Mode
LINE
State
Unregistered
(No IM, Voice mail, No Call Forward)
OFF
Registered + Idle
(No IM, Voice mail, No Call Forward)
OFF
Unregistered + IM + Voice mail
OFF
Registered + IM + Voice mail
OFF
Unregistered + IM (No Voice mail)
OFF
Registered + IM (No Voice mail)
OFF
Unregistered + Voice Mail (No IM)
OFF
Registered + Voice Mail (No IM)
OFF
Unregistered + Call Forward All
(No IM, No Voice Mail)
Registered + Call Forward All
(No IM, No Voice Mail)
Unregistered + Call Forward Delay + Call
Forward Busy
(No IM, No Voice Mail)
OFF
OFF
OFF
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 160
Registered + Call Forward Delay + Call
Forward Busy
(No IM, No Voice Mail)
Unregistered + Call Forward Delay
(No IM, No Voice Mail, No Call Forward
Busy)
Registered + Call Forward Delay
(No IM, No Voice Mail, No Call Forward
Busy)
Unregistered + Call Forward Busy
(No IM, No Voice Mail, No Call Forward
Delay)
Registered + Call Forward Busy
(No IM, No Voice Mail, No Call Forward
Delay)
Registered + Ringing
OFF
OFF
OFF
OFF
OFF
Registered + On Hold
Shared Line
Registered + Connected + Incoming Call
Registered + Connected + Outgoing Call
Unregistered
Registered + Not support SCA Call-info header
Registered + Not support SCA or SCA
Failed
Registered + Idle
GREEN
OFF
Flashing
RED
Flashing
GREEN
GREEN
OFF
OFF
OFF
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 161
Registered + Seized
Registered + Processing
Registered + Alert
Registered + Hold by user
Registered + Hold by the other party
Registered + Connected
BLF/
Eventlist BLF
Offline, Unknown
Terminated
Proceeding
Ringing (Early)
Trying
Presence
Watcher
Handsfree
Confirmed
Offline, Unknown
Avaliable
Unpair
RED
Flashing
GREEN
Flashing
RED
Flashing
GREEN
Flashing
RED
GREEN
OFF
GREEN
RED
Flashing
RED
Flashing
GREEN
RED
OFF
GREEN
OFF
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 162
Speed Dial
Speed Dial Via
Active Account
Dial DTMF
Call Return
Transfer
Call Park
Intercom
Paired, but not connected
Connected
Account Unregistered
Account Registered
Account Unregistered
Account Registered
Account Unregistered
Account Registered
Account Unregistered
Account Registered
LDAP Search
Multicast Paging
Record Idle
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 163
Recording
Flashing
Call Log
OFF
Menu -
OFF
Voice Mail Account not registered
OFF
Account Registered
(No new voice mail)
Account Registered
(Have new voice mail)
OFF
OFF
Please note no matter how each line is configured on the idle screne, all the lines in call screen will keep line or shared line displayed for the corresponding accounts. For example, even if the user has configured all lines as VPK (with non-LINE mode), he/she can still use the configured account to dial out by offhook or pressing SPEAKER, HEADSET or any other unconfigured LINE key to go to call screen.
When the user is in call screen (during a call), he/she can press softkey screen.
to switch back to VPK
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 164
When the user is in VPK screen during a call, he/she can press softkey switch back to call screen.
or corresponding line key to
PROGRAMMABLE KEYS STATUS ON WEB UI
Users could access programmable key status under phone’s web UI->Status.
Web UI->Status->Programmable Keys Status
Virtual Multi-purpose Keys
Multi-purpose Keys
Web UI->Status->Extension Boards Status
Extension 1 keys
Extension 2 keys
Extension 3 keys
Extension 4 keys
Select the tab you would like to check the status, the stauts of the specific keys will display. The screenshot below shows virtual Multi-purpose keys status.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 165
AUTO PROVISION LIST STARTING POINT
The users could find new option “Auto Provision List Starting Point” under phone’s web UI->Settings->Call
Features. Users could select “Extension Boards” or “VPK” which will be used first when the phone is being automatically provisioned with eventlist BLF.
The P value for this option is P8349. 0
– Extension Borads, 1 – VPK. The default value is 0.
ADDITIONAL OVERRIDE DHCP OPTION
The users could find new option “Additional override DHCP option” under phone’s web UI->Maintenance-
>Upgrade and Provisioning. When enabled, users could select Option 150 or Option 160 to override the firmware server instead of using the configured firmware server path or the server from option 43 and option
66 in the local network. Please note this option will be effective only when option “Allow DHCP Option 43
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 166
and Option 66 to Override Server” is enabled.
The P value for this option is P8337. 0
– None, 1 – Option 150, 2 – Option 160. The default value is 0.
ILBC AND G.723.1 SUPPORT
The users could find iLBC and G.723.1 codecs available under phone’s web UI->Account->Audio Settings.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 167
When provisioning the phone with vocoder P value, the value to set codec as iLBC is 98 and the value to set codec as G.723.1 is 4.
Under the same web page, the options “G723 rate”, “iLBC Frame Size” and “iLBC Payload Type” are also added for thoses two codecs.
For complete P value list, please refer to configuration template.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 168
ENABLE SESSION TIMER
Users could enable/disable session timer under phone’s web UI->Account->SIP Settings->Session Timer.
The new P value is P2395. 0
– No, 1 – Yes. By default it’s enabled.
RING SPEAKER FOR CALL WAITING
Users could find option “Ring For Call Waiting” under web UI->Settings->Call Features. When enabled, the phone will ring ringing tone instead of call-waiting tone when the audio is on handset or headset. The new P value is P22102. 0
– No, 1 – Yes. The default value is 0.
CONFIGURABLE BACKLIGHT TIMER
Users could find option “Active Backlight
Timeout” under web UI->Settings->LCD display. This will configure the minute of active backlight timeout with valid range from 1 to 90.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 169
COLOR BACKGROUND WALLPAPER SELECTION
Users could find option “Color Background” under web UI->Settings->LCD Display: Wallpaper category.
Enter any HEX color code based on your preference. The color codes could be found here: http://htmlcolorcodes.com/
If an invalid code is configured, the phone will use default value #000000 instead.
Please note the user must select “Color Background” in “Wallpaper Source” option in order to use the configurable color background code.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 170
Example:
If the user users default color code #000000, the idle screen will load “black” as background. This color will also affect MENU configuration page.
New P value:
P2916: Wallpaper Source. 0
– default, 1 – download, 2 – USB, 3 – uploaded, 4 – Color background.
Default value is 0.
P2921: Background color. This value can be a string with max length of 16 characters.
Default value is #000000.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 171
BLF LED PATTERN EXPLANATION IN WEB UI
Users could view and configure the color and pattern of the LED status based on the BLF status update.
This feature is under web UI->Settings->LED Control.
DISABLE SCREENSAVER WHEN VPK IS ACTIVE
This option is under web UI->Settings-
>LCD Display: Screensaver category. A new option “On if no VPK is active” is added there.
This option is also available under LCD->MENU->Preference->Appearance.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 172
The phone will consider the page active if VPK is in Early (ringing), Trying (dialing) and Confirmed
(talking) status when VPK is configured with mode “BLF”, “Eventlist BLF” or “Presence”.
The P value is P2918 (existing) and value 2 is added for “On if no VLK active”.
P2918: Screensaver. 0
– Off, 1 – On, 2 – On if no VPK active. The default value is 1.
FULL BLACK SUPPORT FOR IDLE LCD BRIGHTNESS
This option can be found under web UI->Settings->LCD display. Users will be able to configure the LCD brightness to 0 when the phone is idle. Valid range is 0 to 12 where 0 is off and 100 is the brightest.
BLIND TRANSFER AND ATTENDED TRANSFER SOFTKEY
This feature works when option “Enabled Auto-Attended Transfer” under web UI->Call Features is set to
“Yes”. When the user tries to transfer an ongoing call, after pressing “Transfer” softkey and entering the number to be transferred to, the user will be able to select softkey “BlindTrnf” for blind transfer or softkey
“AttTrnf” attended transfer.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 173
DISPLAY SIP MESSAGE TEXT ON LCD
During an active call, if the phone receives SIP message REQUEST that has message body with line-based text data defined, the content will be displayed on the phone’s LCD. In the following example, the phone
LCD will display “Total $5” as defined in the SIP message text.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 174
FIRMWARE VERSION 1.0.6.9
PRODUCT NAME
GXP2170
DATE
01/14/2016
CHANGES SINCE 1.0.6.5
ENHANCEMENT
Improved DND indication to cover transparent background
Added support to display date time/weather when RIGHT VPK panel is empty
Added support to configure whether to show label background on VPK
Added support to show long label on VPK
Added support to hide softkeys on main page
Added secondary softkey FIRST to quickly return to VPK page one
Added NewCall softkey on call screen for user to initiate new phone call
Marked softkey EndCall to RED style
BUG FIX
Fixed Device BLF is not updated correctly issue
Fixed Phone randomly doesn’t send voice when using Plantronics EHS CS540A headset with APV-63 EHS adapter
Fixed Line key LEDs don't provide visual indications of Shared call appearances
Fixed Device fails to displays BLF and Call park subscription status
Fixed The mode of EXT is changed to Speed Dial after reset on web
Fixed DND indication unfriendly issue
Fixed Device work abnormal after press TRANSFER key then press NewCall softkey
Fixed The Back softkey at the Bluetooth Scan screen cannot switch to Home softkey
Fixed Device possible crash when drawing DND screen
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 175
FIRMWARE VERSION 1.0.6.5
PRODUCT NAME
GXP2170
DATE
12/18/2015
CHANGES SINCE 1.0.6.2
ENHANCEMENT
Added VPK support for eventlist auto-provision. If there are more BLFs in the eventlist than idle VPK keys, extra BLFs will be auto-provisioned to EXT board
Improved the display format of missed calls
Added display of extension Forward All in idle screen
Added German language input in all configuration fields where the user is required to enter alphanumeric input
Added 12 lines support (with 6 accounts)
Added “None” mode for VPK
BUG FIX
Fixed LCD displays abnormal after changing language on the VPK editing screen
Fixed Broadsoft Silent Alerting feature doesn’t work
Fixed GUI crashes after downloading a large XML application file
Fixed The device calls the wrong number after entering number in onhook dialing screen then pressing
MPK
Fixed The device does not send DHCP DISCOVER after factory reset
Fixed LCD doesn’t have prompt when adding an invalid local group
Fixed Obtaining the wallpaper from USB flash drive requires reboot to take effect
Fixed Voicemail VPK is invalid after configuring its value
Fixed The HOLD screen displays abnormal
Fixed LCD does not display the RESUME softkey when the call is on hold
Fixed LCD does no display MENU mode on editing screen of VPK
Fixed Device fails to set LINE to Menu mode
Fixed Device fails to download wallpaper after repeating downloading and uploading
Fixed LCD does not display softkey-MPK in time when setting the MPK on the weather or currency screen
Fixed The editing screen of VPK is displayed wrong after setting VPK on LCD
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 176
Fixed The label of LINE 6 is displayed abnormal after disabling Bluetooth Hands-free mode
Fixed Device speed dial with Bluetooth Hands-free account after setting VPK account to account 6
Fixed The Save and Apply button on VPK web page does not work for other web pages
Fixed LCD pops up prompt after pressing VPK which is not configured
Fixed The Save and Apply button on VPK web page works abnormal
Fixed LCD is displayed abnormally when adding the 47 th
and 48 th
VPK
Fixed The device is displaying extra currency entries when less than 5 entries are queried
Fixed Currently page does not update periodically
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 177
FIRMWARE VERSION 1.0.5.33
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
02/09/2016
CHANGES SINCE 1.0.5.29
BUG FIX
Fixed Device crashing issue after cleaning up eventlist BLF when LED light is abnormal
Fixed Device is losing network access when enabling LLDP/LLDP-MED
Fixed Device is not recognized by TP-LINK switch using LLDP
Fixed Device showing no IP issue
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 178
FIRMWARE VERSION 1.0.5.29
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
01/08/2016
CHANGES SINCE 1.0.5.28
BUG FIX
Fixed Device BLF is not updated correctly
Fixed Phone randomly doesn’t send voice when using Plantronics EHS CS540A headset with APV-63 EHS adapter
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 179
FIRMWARE VERSION 1.0.5.28
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
12/30/2015
IMPORTANT UPGRADING NOTE
Once upgraded to 1.0.5.28, downgrading to any previous firmware version is not supported.
CHANGES SINCE 1.0.5.23
ENHANCEMENT
Added Dual outbound SIP proxy support
Added support to show SIP message text content on LCD screen
Added option to ignore Alert-info header when used for distinctive ringtone
Added support Broadsoft XSI authentication type
Added option to filter characters from dialed numbers
Added ability to customize DHCP option for provisioning server
Added ability to prevent the phone from sending DNS then HTTPS requests to IPVideoTalk media server
Added ability to search in Broadsoft XSI search by using part of the strings
Added BLF Call pickup with Barge-In option
Added Broadsoft XSI SIP Authentication method by selecting the account
BUG FIX
Fixed BLF keys not showing correct status for monitored extension with multiple registrations
Fixed Phone cannot auto answer by call info provided by PortaOne
Fixed DUT sends SIP instance ID when set to No, unless DUT is rebooted
Fixed DUT doesn’t update the CID when performing auto-attended transfer
Fixed DUT keeps sending SUBSCRIBE after receiving NOTIFY with reason=noresource
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 180
FIRMWARE VERSION 1.0.5.23
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
09/25/2015
CHANGES SINCE 1.0.5.18
ENHANCEMENT
Added support to allow line labeling by setting Line Key to Account X
Added support to have auto answer audio source configurable
Added support for re-conference after split
Added support for secondary preferred DNS
Added fail-safe if server does not include "Expires" field in SUBSCRIBE response
Updated logo for web UI
BUG FIX
Fixed Phone GUI slow performance issue
Fixed Audio mode is wrong after auto answer call in Toggle mode
Fixed MPK light indicator doesn't work for call park
Fixed Phone does not update BLF status when the version on the phone is greater than the version in the received NOTIFY message
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 181
FIRMWARE VERSION 1.0.5.18
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
08/12/2015
IMPORTANT UPGRADING NOTE
Once upgraded to 1.0.5.18, downgrading to any previous firmware version is not supported.
CHANGES SINCE 1.0.4.23
ENHANCEMENT
Added Auto provision the Multi-purpose keys based in the SIP NOTIFY messages from the Eventlist
BLF feature
Updated Time settings for Moscow, Russia
Added SSL encryption key random generate feature
Added Auto-scale feature to fit more characters in the LCD account label area
Added Option to disable SIP NOTIFY Authentication
Added Feature to display BLF status on LCD and Extension board
Added Automatic UCM Call Features Integration
Added Features as a softkey after configuring feature codes for phone
Added Option to allow hands-free conference with SIP line
Added Phonebook HTTP/HTTPS Authentication
Added Configuration to enable/disable host verification
Added Feature to enable bypass dial plan through call history and directories
Added Option to unregister instance on reboot, which only clears the registration of the phone’s own contact before the phone gets rebooted
Added One-button (Redial) showing recent dialed list
Added More obvious indication for DND display
Re-grouped the status information from LCD to make it the same as status page on WEB UI
Added Feature to display IP2Location information on both Web GUI and LCD
Added Time setting into LCD menu
Added Factory reset and provision now function to web
Added Audio recording application
Added OnHold Reminder tone
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 182
Added Call Log as a new mode of programmable keys for users to access to the call history directly
Added Feature to allow configuration of MPK or Line key to provide MWI for other extension
Added Configurable option to change the status of BLF LED indicator
Added Option to customize the On/Off code for DND/call forwarding
Added Reset phone through SIP notify
Added Option to enable priority to Intercom Call
Added Support for Hebrew characters displayed on EXT board
Added "Transfer to Voicemail" softkey support for FreePBX
Added Broadsoft UC-One feature: Special handling for numbers ending with *
Added "Trusted CA Certificates" option to allow user to upload certificate
Added Redirect HTTPS firmware/Config file upgrade request when receiving HTTP 302 response
Hid returned values for passwords (eg. Admin password, SIP passwords) when P-value is received
Added Option to set the default call log type to be used with the phone
Modified Feature for auto-check language files update from server and added options to download
Improved Forward All timeout behavior
BUG FIX
Fixed Phone fails to upgrade and gets stuck at booting screen due to firmware mask check fail after incomplete firmware upgrade
Fixed When call is answered using handset, subsequent calls will not ring Bluetooth headset
Fixed Ethernet link shows disconnected with no IP in mixed network environment with IPv4 and IPv6
Fixed User can retrieve any configuration value without authentication
Fixed Phone couldn't dial DTMF correctly via MPK buttons
Fixed Bluetooth Name is always updated along with other variables, such as power and discoverable
Fixed Device connected with UCM auto-provision server fails to be provisioned using HTTPS method
Fixed Configure Eventlist BLF URL of other accounts will cause Eventlist BLF MPK key has no light
Fixed LDAP Search failed when using Windows Active Directory/LDAP service
Fixed Can hear clicking sound at the beginning of the call
Fixed Click-to-Dial issue after enabling Hands-free mode
Fixed Long pressing blank GXP2140EXT MPKs couldn't skip to edit page
Fixed Call waiting tone disappears after far end cancels call
Fixed Duplicate P-value in exporting config.txt file
Fixed Device works abnormally when there is incoming call in call features page
Fixed Audio mode works abnormally when using EHS headset for the call
Fixed GXP2140 audio mode is changed to speaker after canceling Transfer
Fixed Line LED doesn’t light up during the call
Fixed Off-hook auto dial works abnormally in FwdAll page
Fixed Mute is not disabled after hands-free device ends the call
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 183
Fixed Phone is muted after pressing Mute key in ringing status
Fixed Call couldn't be retrieved when auto-attended transfer fails
Fixed Displaying invalid Conf call softkey after 2nd party ending call
Fixed Speaker key ending call abnormally in Toggle mode
Fixed LCD display is abnormal after ending auto-answer call in FwdAll page
Fixed Mute key and icon display issue after enabling Idle Mute
Fixed Upgrade default method becomes TFTP after factory reset through TR069
Fixed Phonebook softkey doesn’t work
Fixed There is no Hands-free line account display after connecting with hands-free device
Fixed Device plays dial tip tone in idle status
Fixed Issue of Hands-free line before logging in public mode
Fixed Phone does not accept BLF NOTIFY if SUBSCRIBE is not yet accepted
Fixed Issue when adding contacts in public mode
Fixed Last account display issue after enabling Hands-free mode and configuring with MPK
Fixed There is no “1Bc” softkey on number input box of new contact
Fixed LCD displays abnormally after far end cancelling call in Keypad lock mode
Fixed Star key Keypad/Restrict mode Lockout Duration doesn't work
Fixed Some contents are displayed incompletely in public mode login page
Fixed Hands-free call is not terminated when the cellphone is disconnected while dialing
Fixed LCD doesn't skip to dialing page after pressing Headset key in Menu page
Fixed Gs_pcap crashes after removing USB when capturing the trace for the call
Removed Broadsoft Phone book/Call Log from LCD when not in use
Fixed SIP TLS Private key and certificate cannot be provisioned using XML
Fixed Phone fallback to PCMU upon re-invite during the session
Fixed Incompatibility issue with Plantronics M165 Bluetooth headset
Fixed Device doesn’t write in contacts after clearing then downloading the same phone book.xml file
Fixed Audio codec choice 3 and choice 4 are both G.729 after reset those options
Fixed Device upgrade abnormally after downloading files then powering off in HTTPS mode
Fixed Call Forward indication
Fixed Memory leak while parsing UCM Keep Alive Option
Fixed HTTP request for currency does not return correct values
Fixed Hebrew language missing strings
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 184
FIRMWARE VERSION 1.0.4.23
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
08/02/2015
CHANGES SINCE 1.0.4.17
ENHANCEMENT
Added LDAPS support
Hided LDAP config when constraint mode activated
Added option to enable/disable Crypto life time when using SRTP
Enabled MetaSwitch configuration file download authentication feature in general build
Added support of DHCP OPTION 160 on Metaswitch FW
Updated New Zealand time zone
Added SW version and DevID to HTTP requests for phonebook.xml and language.txt
Added support for x-gs-screen event from SIP NOTIFY message
Added option to enable/disable the “Active MPK Info Page”
Added display info from Diversion in received INVITE
Added scaling the input on account description to fit in the LCD account description area
Fixed Bad quality the multi-purpose keys from the Eventlist BLF
Added ability to control NTP update interval
Simplified the procedure to make N-Way conference under BroadSoft server
Added Hebrew input
Added support for BLF offline state
Added Quick/Exact match search method on Handsfree mobile phonebook
Added printing syslog level on syslog messages
Added option 160 support
Added option to enable/disable “Active MPK Info Page”
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 185
BUG FIX
Fixed LDAP doesn't support display in Chinese
Fixed LDAP Lookup for incoming call does not display Russian characters
Fixed call park pick-up with replace header
Fixed NOTIFY from call group pickup not applied
Fixed phone not displaying contact with Polish characters in LDAP
Fixed devices will call wrong number after DTMF in talk and then pressing Speed Dial MPK
Fixed auto answer works abnormally when there are multiple calls
Fixed dial DTMF with line keys works abnormally after pressing twice in idle
Fixed GUI crashed after pressing Send key in Bluetooth phonebook page
Fixed firmware upgrade issue with option 160
Fixed Secondary dial tone dial plan with insert/replace
Fixed G722 encoded audio prompt files are distorted during playback
Fixed Early Conference and Ring-back Anomaly issue
Fixed Headset cannot be put on mute when Bluetooth is enabled
Separated QoS SIP and RTP options
Fixed Onhook dialing with secondary dial tone causes "No dial plan rules matched"
Fixed CONF+BLF use Broadsoft ID instead of Extension number
Fixed Syslog output not including MAC address in all messages
Fixed Syslog output not showing correct firmware version
Fixed Bad quality audio using G.722
Fixed Phone does not ask for configuration file, firmware and ring tones when LLDP is used to discover VLAN
Fixed Mute doesn’t work after holding the talk in Bluetooth audio mode
Fixed Device worked abnormally after answering multicast paging call in transfer page
Fixed Phonebook export/upload are accessible without authentication request
Fixed Configuration value might be retrieved without authentication
Fixed LDAP Search only by string beginning
Fixed Phone crashed after multicast paging calling in account1 inactive status
Fixed SSH root access doesn’t work.
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 186
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 187
FIRMWARE VERSION 1.0.4.17
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
02/19/2015
IMPORTANT UPGRADING NOTE
Once upgraded to 1.0.4.17, downgrading to any previous firmware version is not supported.
CHANGES SINCE 1.0.4.16
BUG FIX
Fixed potential security issue for unauthorized access to product configuration
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 188
FIRMWARE VERSION 1.0.4.16
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
09/30/2014
CHANGES SINCE 1.0.4.15
ENHANCEMENT
Added support to configure phone’s MPK from phone GUI
BUG FIX
Fixed Disable call waiting also worked in ringing status
Fixed Bluetooth enabled/disabled is not indicated properly on the phone screen
Fixed Phone hangs while transferring calls
Fixed Phone cannot initiate multicast paging call when the handset is offhook from idle state
Fixed Bluetooth: Line toggling causes audio loses
Fixed Preferred vocoder option default value error after resetting audio settings page
Fixed Conference works abnormal when using MPK to transfer
Fixed BYE request sent to the wrong proxy/IP based on the route set
Fixed Device randomly crashed after removing network cable in talking status
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 189
FIRMWARE VERSION 1.0.4.15
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
09/16/2014
CHANGES SINCE 1.0.4.10
ENHANCEMENT
Added support to play short reminder beep when performing auto answer
Added HTTP CTI support
Added HTTP/HTTPS authentication support for phonebook download
Added ability to select call pickup mode
Added support to apply dial plan when dialing from call history/phonebook
Added support to unregister on URI based and clear only the contact header from the phone when using “Unregister on Reboot” option
Added XML application support
Added Direct IP Call support on MPK and Phonebook
Added ability to dial the digits faster when using MPK as Dial DTMF
Added ability to show text pop-up window via SIP MESSAGE
Added option “Disable Busy Tone on Remote Disconnect” to disable playing busy tone upon receiving
BYE
Added option to enable/disable Broadsoft call park
BUG FIX
Fixed 3CX call park retrieval for shared parking is not working
Fixed MPK Call Park mode is not working correctly on 3CX platform
Fixed HTTP GET provisioning request displays HTTP username/password in plain text
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 190
Fixed Device plays ringback tone in talking and audio loopback mode
Fixed Device doesn’t apply configurations after enabling 3CX auto provision
Fixed Feature code for “Busy Call Forward” cannot be enabled/disabled when handset is on hook
Fixed Phone that initiates multicast paging cannot listen to the same multicast IP:Port
Fixed After receiver ends the multicast paging call, the receiver can still listen when off hook to dial screen
Fixed Paging barge of multicast paging doesn’t work
Fixed Multicast paging barge doesn’t have audio
Fixed there is no sound in talking and audio loopback mode after network is down->initiating multicast paging->reconnecting network
Fixed SIP Server and outbound proxy cannot be configured with host address in format x.x.x.0
Fixed IP call failed by using “Edit and Dial” option in call history
Fixed phone crashes after clearing the listened multicast paging IP:Port
Fixed phone doesn’t answer the call when it’s the first time to enable Auto Answer
Fixed phone failed to connect to UCM6100 to pick extension for auto provisioning if using HTTPS method
Fixed G.722 encoded audio prompt files are distorted during playback
Fixed tooltip for option “Unregister on Reboot” is not correct
Fixed phone frequently sends SUBSCRIBE for DND when using Broadsoft platform
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 191
FIRMWARE VERSION 1.0.4.10
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
06/19/2014
CHANGES SINCE 1.0.4.6
BUG FIX
Fixed There is no dial tone, dialing DTMF tone, ring back tone, call waiting tone when using Bluetooth headset
Fixed MPK mode "Call Park" is not working on 3CX platform
Fixed DTMF digits are not transmitted "In audio" when using Bluetooth headset
Fixed Device is using the next account when dialing through predictive dial list
Fixed SPLIT softkey in auto-attended transfer is not working properly
Fixed MPK does not send DTMF using "Enable Sending DTMF via Speed Dial" during a call when configured as BLF
Fixed DTMF is not recognized
Fixed Phone crashed after dialing conference extension on UCM61xx
Fixed Last 2 accounts on the phone displays abnormal after setting Account Active to No
Fixed MPK mode "Record" is not working
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 192
FIRMWARE VERSION 1.0.4.6
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
06/05/2014
CHANGES SINCE 1.0.4.5
BUG FIX
Fixed Bluetooth hands-free: device ends call after pressing other line in HF line talk
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 193
FIRMWARE VERSION 1.0.4.5
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
05/30/2014
CHANGES SINCE 1.0.3.9
ENHANCEMENT
Added Option to enable/disable widget display
Added Support to insert pauses into speed dials and phonebook entries
Added Web interface to capture trace. New P values added:
P2999: capture location. 0
– internal storage, 1 – USB
P6007: capture with RTP packets. 0
– No, 1 – Yes
P6008: USB filename for the captured trace
Added Multicast paging support
Added Broadsoft IM&P feature: Dial Conference
Added New P values for Broadsoft IM&P feature:
P6005: Broadsoft IM&P port number
P6006: Broadsoft IM&P host address
Added Option to show account name only and not the User ID on the LCD screen
Added Phone screen should display labels for line keys when configured as Call Park/BLF
Changed display "Group ID" block name in Broadsoft call log
Added "SpeedDial" as "Action" to softkeys
Added "Forward" option in ringing screen to transfer incoming call without need to answer it
BUG FIX
Fixed IP display abnormal under voice VLAN circumstance
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 194
Fixed LCD display abnormal when switching line in Bluetooth Hands-free line calling out status
Fixed End the first call then the audio mode icon would disappear
Fixed IP address doesn’t display when assigned VLAN via LLDP
Fixed Phone shows wrong registration status when phone’s IP is 0.0.0.0
Fixed 2-way audio keeps open during a blind transfer
Fixed Adjusting account index to begin from 1 for phonebook xml file
Fixed Dial softkey displays even there is no entry in UC-One
Fixed Device couldn’t log in UC-One after pressing LogIn softkey repeatedly
Fixed There is no cancel softkey in Transfer interface after Bluetooth Hands-free line ends the call
Fixed Device works abnormal sometimes after downloading config file
Fixed BTOff softkey doesn’t work after switching line
Fixed Device works abnormal after pressing BTOff softkey when there are 2 incoming calls
Fixed Audio mode changed after the other party answers the call when using Bluetooth Hands-free line
Fixed Distinctive ringtone only reads last line when multiple alert-info headers are sent
Fixed UC-One softkey icon on LCD screen can’t show up or hide automatically
Fixed There is no Resume softkey after pressing UP key in HOLD screen
Fixed Phone doesn’t handle multiple m lines in SDP correctly
Fixed Contacts disappeared in UC-One screen
Fixed Public mode is abnormal
Fixed Bluetooth: couldn’t redial via Bluetooth headset
Fixed Softkey displays incorrectly if switching to another line when ringing under Bluetooth Handsfree mode
Fixed Bluetooth hands-free: call is established abnormally when the connected mobile phone is in a call with another phone
Fixed Bluetooth hands-free: audio sound performs abnormally after pressing HF line key in Bluetooth headset talk
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 195
Fixed Bluetooth hands-free: LCD displayed abnormally after ending Bluetooth hands-free account talk
Fixed Bluetooth hands-free: Device performed abnormally after off/onhook in HF line calling out status
Fixed Bluetooth displayed wrong in pair request window interface
Fixed Bluetooth hands-free: pair with hands-free device abnormal after disconnecting in talk
Fixed Bluetooth ring tone issue
Fixed Bluetooth hands-free: LCD displayed wrong when there is incoming call of HF account line in IP display interface
Fixed Star key lock has no password limit on LCD
Fixed Softkey5 on the 1st entry in Bluetooth scanning screen displayed wrong
Fixed LCD displayed no talk duration and swap softkey disappeared after answering second call
Fixed Bluetooth hands-free: all softkeys in incoming call page didn't work
Fixed Weather application language cannot be customized
Fixed Star keypad lock failed in screensaver mode
Fixed Broadsoft phonebook sends search inquiry to wrong URL
Fixed Device connects to Bluetooth hands-free device automatically after disconnecting manually
Fixed Device couldn't dial through Bluetooth phonebook when talking in Bluetooth hands-free mode
Fixed GXP2130 Broadsoft executive assistant page displayed incomplete
Fixed LCD displayed abnormally when there is incoming call in Bluetooth phonebook screen
Fixed Bluetooth phonebook entry disappeared after clearing search filter
Fixed Cursor moved abnormally when turning pages in Call history
Fixed Last call wasn't held after dialing through Broadsoft Phonebook
Fixed There is no audio icon displayed after dialing through Broadsoft phonebook
Fixed Pressing line key couldn't answer incoming call in pickup call screen
Fixed Broadsoft UC-One feature: fails to display all contact entries in Group Directory
Fixed When switching line, instead of showing dial screen, it shows an overview screen
Fixed Input Shiftable mode is not functioning correctly
Fixed Bluetooth hands-free: first incoming call after connection will not play out ring tone when using
IPhone
Fixed Bluetooth hands-free: LCD displayed abnormally after HF line incoming call cancelling
Fixed Bluetooth hands-free: LCD displayed abnormally after ending HF line talk
Fixed Bluetooth hands-free: One-way audio when incoming call in HF line talking
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 196
Fixed Bluetooth hands-free: No Answer or Reject softkey on incoming call after ending HF line talk
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 197
FIRMWARE VERSION 1.0.3.9
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
05/05/2014
CHANGES SINCE 1.0.2.9
ENHANCEMENT
Updated OpenSSL library from 1.0.1e to 1.0.1g
Added PhonePower special feature
Added P value for HTTP Proxy. P1552 – HTTP Proxy Server
Added Broadsoft IM&P features: Contact/Buddy List and Presence
Added Screensaver options to LCD under "Preference"->"Appearance"
Added Web UI option to select default search mode for phonebook
Added Support to display extension number in searching result from Broadsoft Group Directory
Added GUI interface for users to download language files
Added Bluetooth softkey in Hands-Free dial screen
Added Backspace softkey will change to clear when long pressing it in UCM Detect screen
Added Second dial tone support
Added Input character selection window
Added BLF server support
Added New P values:
P2375/P2475/P2575/P2675/P2775/P2875 - BLF Server option for Account 1/2/3/4/5/6
P2920 - Input Selection Mode
P2964 - Enable Broadsoft IM&P
P2965 - Broadsoft IM&P Account
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 198
P2966 - Broadsoft IM&P Username
P2967 - Broadsoft IM&P Password
P2968 - Broadsoft IM&P Autologin
P2969 - Broadsoft IM&P Display Non XMPP Contacts
P2970 - Default Phonebook Search Mode
BUG FIX
Fixed Fetching data using cURL vulnerability
Fixed HTTP/HTTPS proxy settings not respected
Fixed DSP flow buffer index in TX path
Fixed Part of the call history logs lost
Fixed GXP2130 Home screen time display will shift when ticking
Fix set date for 802.1X certification
Fixed Bluetooth Hands-Free: no pairing request window pops up and Bluetooth crashes when using with certain mobile devices
Fixed Bluetooth Hands-Free: device couldn't manually connect with hands-free device after disabling
Hands-Free mode
Fixed Bluetooth Hands-Free: SWAP softkey displays after ending one talk in hands-Free mode
Fixed Bluetooth Hands-Free: device couldn't switch connection with different Hands-Free device directly
Fixed Bluetooth Hands-Free: pressing Speaker key couldn't end call for Hands-Free account
Fixed Bluetooth Hands-Free: device performs abnormally after reboot device in Hands-Free talking
Fixed Bluetooth Hands-Free: device works abnormally after Hands-Free device switches audio source
Fixed Bluetooth Hands-Free: audio mode is changed after redialing in Headset dialing mode
Fixed Bluetooth status display is wrong in scanning screen
Fixed GUI crashed after searching and pressing Down key twice in local phonebook
Fixed GUI crashed after incoming call and then pressing Right and Left keys on local call log screen
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 199
Fixed Cursor disappears after switching language in LCD
Fixed Pressing digits when the phone is on hook doesn't go to dial screen if the screensaver is active
Fixed TR-069: Removed TR-069 enable/disable option. TR-069 is enabled by default.
Fixed TR-069: CPE replies with error code 9016 for firmware upgrade
Fixed Reduced audio buzz when receiving high amplitude, distorted RTP
Fixed Implemented Handset TX (MIC path) user gain
Fixed LCD didn't skip to dialing screen after off hook in screensaver process
Fixed No Connect softkey for paired devices in Bluetooth scanning screen
Fixed "Custom Call-Info for Auto Answer" doesn't work
Fixed Device couldn't be called in and one-way audio happens after calling out
Fixed No SignIn softkey on LCD when account has been added to a call queue
Fixed The call is dropped by the phone after 37 seconds
Fixed Device couldn't download Bluetooth phonebook automatically after connecting with Galaxy series mobile devices
Fixed Softkeys in idle screen is displayed incompletely for some languages
Fixed LCD returns to wrong directory after checking detail info in call history
Fixed Intercom MPK didn't work when the phone is in talking status
Fixed LCD displays abnormally after pressing LDAP search MPK in screensaver
Fixed Changed title "Last Name" to "Name" in Broadsoft call log
Fixed LCD displays screensaver after pressing HOLD+DOWN keys in talking status
Fixed Uploading wallpaper doesn't take effect unless the wallpaper source is uploaded
Fixed Wallpaper doesn't scale to screen size
Fixed Input selection window disappears too soon on ExactMatch phonebook search mode
Fixed There is no "Pickup" and "Call Park" softkey
Fixed It can only display 15 numbers in "Edit and Dial"
Fixed Bluetooth headset key has to be pressed twice to answer incoming call in holding status
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 200
Fixed Bluetooth headset and speaker mode are used at the same time after resuming the call on hold
Fixed Two calls are initiated on redial after Account 1 is configured as SCA
Fixed Phone couldn't release the call via Bluetooth headset after back from another audio mode
Fixed Pressing Bluetooth headset key couldn't end call
Fixed LCD doesn't skip to dialing screen after pressing Hands-Free line key in FwdAll screen
Fixed There is no system ring tone when adjusting volume in ringing screen
Fixed Must press Headset key twice to switch to Toggle mode
Fixed Broadsoft Call Center status is displayed abnormally
Fixed LCD is returned to idle screen before dialing out from call history
Fixed Adjusting volume on screen dialing screen won't take effect after establishing call
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 201
FIRMWARE VERSION 1.0.2.9
PRODUCT NAME
GXP2130/GXP2140/GXP2160
DATE
03/27/2014
CHANGES SINCE 1.0.1.14
ENHANCEMENT
Added Bluetooth handsfree profile support
Added Bluetooth phonebook download support
Added Predictive dial support for Bluetooth handsfree account
Added Broadsoft Flexible Seating support
Added Broadsoft Executive/Assistant support
Added 3CXv12 CTI integration
Added Provider lock support
Added Configuration file upload support via web GUI
Added Screen saver support
Added Wallpaper support
Added STAR key keypad lock feature
Added Keypad shortcut to reboot (HOLD + LEFT) and provisioning (HOLD + RIGHT)
Added Missed call softkey on HOME screen
Added Phonebook search using characters by pressing number keys
Added Option to disallow turn on DND function
Added Bluetooth options "Device name" "Bluetooth MAC" and "Discoverable timeout"
Added Special symbol input method
Added Hide currency and weather screen if not enabled
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 202
BUG FIX
Fixed Lack of side tone on the phone
Fixed "Configuration via Keypad Menu" doesn't take effect
Fixed Handset mode not working if SCA is enabled
Fixed Pressing line key shouldn't take effect if SCA is enabled
Fixed Bluetooth scan result still shows after Bluetooth is turned off
Fixed Bluetooth has no ring back tone or DTMF tone
Fixed Bluetooth has no sound in audio loopback
Fixed Handset icon displays after answering call using Bluetooth headset
Fixed Phone is automatically disconnected from Bluetooth headset
Fixed Bluetooth headset has no ring tone after pressing BT ON/BT OFF softkey
Fixed Phone doesn't play failure treatment after line seize on active line
Fixed Bluetooth discoverable option abnormal
Fixed Wrong audio channel after hold and unhold in headset toggle mode
Fixed EHS headset has no dial tone when switching line
Fixed The number entered after 0 changes to + in transfer or conference screen
Fixed Bluetooth audio mode is still on after answering call from EHS headset
Fixed No sound after pressing another line key in incoming call
Fixed Increased ringer maximum loudness by 5dB
Fixed Phone can't dial from Broadsoft phonebook if account 1 is not registered
Fixed GUI crash using weather after configuring certain self-defined city code
Fixed Idle mute is disabled after pressing MUTE in talking
Fixed "Enable Idle Mute" option in web GUI doesn't take effect
Fixed Transfer not working if BLF MPK has alphanumeric characters in user ID configured
Fixed Pressing RIGHT key doesn't take effect in LCD menu->UCM Detect: "Account to Apply"
Fixed LCD switches to wrong screen after accessing call history detail information
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 203
Fixed LCD menu and keypad selection related issues
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 204
FIRMWARE VERSION 1.0.1.14
PRODUCT NAME
GXP2140/GXP2160
DATE
03/13/2014
CHANGES SINCE 1.0.1.6
BUG FIX
Fixed Conference participant cannot hear the ring-back tone when the third-party is ringing
Fixed Network connectivity lost when changing the Layer 2 QoS 802.1p Priority
Fixed Phone doesn't send 200OK to reply NOTIFY for eventlist BLF in IPv6
Fixed Self-defined ring tone plays when switching account in dialing page
Fixed Hoteling status update in LCD idle screen not working properly
Fixed Phone doesn't send out Unavailable code info in SUBSCRIBE for Broadsoft call center
Fixed Phone crashes sometimes on parsing NOTIFY messages with Registration event
Fixed NTP server path modification couldn't be saved
Fixed GUI crash in UCM detect
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 205
FIRMWARE VERSION 1.0.1.6
PRODUCT NAME
GXP2140/GXP2160
DATE
02/07/2014
CHANGES SINCE 1.0.0.17
ENHANCEMENT
Added Broadsoft call park notification support
Added Broadsoft shared call appearance support
Added Broadsoft call center support
Added Eventlist BLF update support for Broadsoft
Added Broadsoft network-based 3-way/N-way call support
Added Local group and Broadsoft phonebook in phonebook support
Added Instant message
BUG FIX
Fixed Numbers typed in "LDAP" will disappear after pressing volume keys
Fixed Auto location abnormally after factory reset
Fixed No DTMF tone in Bluetooth headset
Fixed No ring tone can be heard from headset under "Headset" mode
Fixed Cursor skipped abnormally after LDAP searching
Fixed Disabling "Always Ring Speaker" invalid and no headset icon on LCD when toggling on headset mode
Fixed "Always Ring Speaker" abnormal in Toggle mode
Fixed Noise exists in ring tone after receiving 486
Fixed Invalid web UI options "Intercom" and "Disable DND"
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 206
Fixed Extension board won’t reboot with GXP2140
Fixed Wrong language display after modifying in config file
Fixed Phone can hear itself in Bluetooth headset mode after the far end puts the call on hold
Fixed LCD won't switch to transferring interface after conference is ended
Fixed There is no voicemail icon next to account bar when receiving voicemail
Fixed Cannot adjust volume when there is an incoming 3rd party call
Fixed LCD language doesn't update immediately
Fixed "Disable Missed Call Backlight" doesn't take effect
Fixed Audio mode is wrong or no sound in talking after disconnecting with Bluetooth headset
Fixed Phone won't automatically connect to Bluetooth headset at bootup
Fixed LCD displays wrong ID if returning from an unsuccessful transfer
Fixed LDAP search result cannot be fully displayed if pressing UP key
Fixed Device submitted wrong PPPoE service name
Fixed Phone cannot establish second conference call
Fixed Subscribe update doesn't synchronize with Registration
Fixed Device ends call automatically when switching lines in EHS mode
Fixed Search filter is not cleared after exit from LDAP directory
Fixed Last name information is lost after saving LDAP searching result to local phonebook
Fixed Audio mode won't switch to headset mode after off-hook on volume adjusting screen
Fixed Pressing BT headset call button invalid on incoming call during an active call
Fixed Pressing BT headset call button cannot end call
Fixed Pressing line key can't switch to dialing interface in audio loopback mode
Fixed LCD displays abnormal after pressing BT headset call button to end call
Fixed Cannot end call after pressing Headset key in CONF interface
Fixed No ring tone after far end hangs up in CONF or Transfer interface
Fixed Device is abnormal after modifying LDAP settings in talking
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 207
Fixed LCD displays + if pressing 0 for a long time as DTMF during talking
Fixed Volume adjusting issues in audio loopback mode
Fixed Extra softkey "Uncheck" displays after deleting phonebook group
Fixed Input mode can be toggled when editing LDAP directory number
Fixed MPK LED doesn't update status upon receiving BLF eventlist NOTIFY on extension board
Fixed Forward icon displays after disabling account 1
Fixed Phone ignores characters after # when sending DTMF during the call
Fixed Incoming calls display elapsed time of the last call
Fixed Phone won't return to active call if answering a new call during transfer operation
Fixed Call-Info header is in INVITE after switching to second account
Fixed Redial abnormal after configuring account active to No
Fixed Feature code *72 takes effect even if account 1 is not registered
Fixed GUI crash after pressing Speed Dial MPK with no available lines
Fixed Off-hook auto dial not working after configuring EHS headset
Fixed Switching audio mode issues in off-hook auto dial
Fixed Device cannot automatically switch audio mode after turning off Bluetooth headset
Fixed Wrong audio codec is negotiated after resuming the conference on hold
Fixed Wrong LCD display when pressing CONF key if conference is disabled
Fixed Wrong audio mode after disabling toggle mode
Fixed Device cannot dial or reboot after switching MPK mode from BLF to Presence Watch
Fixed Provisioning doesn't work via HTTP after reboot
G
RANDSTREAM
N
ETWORKS
GXP2130/2135/2140/2160/2170 Release Note Page 208
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement