Philips | SC-BT735 | User's Manual | Philips SC-BT735 User's Manual

SCBT735_330_230EBEPEG_VQT2Q52-B.book 1 ページ
2010年2月9日 火曜日 午前10時51分
Operating Instructions
Blu-ray Disc Home Theater Sound System
Model No. SC-BT735
SC-BT330
SC-BT230
The illustration shows the image of the unit SC-BT735.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Model number suffix “EB” denotes UK model.
VQT2Q52
EB EP
until
2010/06/11
SCBT735_330_230EBEPEG_VQT2Q52-B.book 2 ページ
2010年2月9日 火曜日 午前10時51分
Getting started
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION!
≥ DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
≥ DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
≥ DO NOT PLACE SOURCES OF NAKED FLAMES,
SUCH AS LIGHTED CANDLES, ON THE UNIT.
≥ DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
≥ USE ONLY THE RECOMMENDED ACCESSORIES.
≥ DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
This product may receive radio interference caused by
mobile telephones during use. If such interference is
apparent, please increase separation between the product
and the mobile telephone.
The socket outlet shall be installed near the equipment and
easily accessible.
The mains plug of the power supply cord shall remain
readily operable.
To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from AC
receptacle.
VQT2Q52
2
(Side of product)
(Inside of product)
SCBT735_330_230EBEPEG_VQT2Q52-B.book 3 ページ
2010年2月9日 火曜日 午前10時51分
Caution for AC Mains
Lead
(For the United Kingdom and Republic of Ireland)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of
the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug fitted
and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1
Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2
Replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF
AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or
Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL Ó OR COLOURED GREEN
OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
VQT2Q52
3
SCBT735_330_230EBEPEG_VQT2Q52-B.book 4 ページ
2010年2月9日 火曜日 午前10時51分
Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight,
high temperatures, high humidity, and excessive vibration.
These conditions can damage the cabinet and other
components, thereby shortening the unit’s service life. Do not
place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the
unit and cause a fire. Do not use a DC power source. Check
the source carefully when setting the unit up on a ship or other
place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the
lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock. Do not handle the plug
with wet hands. This can cause electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs,
disconnect the AC mains lead and contact your dealer or an
authorized service centre. Electric shock or damage to the unit
can occur if the unit is repaired, disassembled or reconstructed
by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
VQT2Q52
4
Information for Users on Collection and Disposal of
Old Equipment and used Batteries
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you
will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old
products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
For business users in the European
Union
If you wish to discard electrical and
electronic equipment, please contact your
dealer or supplier for further information.
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Cd
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
SCBT735_330_230EBEPEG_VQT2Q52-B.book 5 ページ
2010年2月9日 火曜日 午前10時51分
Getting started
Table of contents
Getting started
TV
Accessory .......................................................... 6
Unit and media care .......................................... 7
Using the remote control ................................... 7
Control reference guide ..................................... 8
Enjoying TV with unit’s speakers .....................30
STEP 2: Positioning ........................................ 14
STEP 3: Connections ...................................... 15
•Speaker cable connection ..............................................15
•Radio antenna connection ..............................................15
•Connection to a TV .........................................................16
•Connection to a broadband network ...............................18
STEP 4 : AC mains lead connection ............... 18
STEP 5: Smart setup / Easy setup .................. 19
•Network Easy Setting ....................................................20
•Firmware updating ..........................................................21
STEP 6:
Reprogramming the remote control ................. 22
Inserting or removing a media ......................... 22
START menu ................................................... 23
Enjoying sound effects from all speakers ........ 24
•Enjoying surround sound effects ....................................24
Using the iPod/iPhone ..................................... 32
•iPod/iPhone Connection ................................................ 32
•iPod/iPhone Playback .................................................... 33
Advanced operations
Enjoying VIERA CAST ..................................... 34
Playback menu ................................................ 34
DLNA feature ...................................................36
Setup menu .....................................................37
•Speaker settings ............................................................ 41
Optional speaker settings
Speaker installation option ............................... 42
Playback
Reference
Playing video contents .................................... 25
Troubleshooting guide ..................................... 43
Messages ........................................................ 45
About MP3/JPEG/DivX/
AVCHD/MPEG2 files .......................................46
Supplemental information ................................ 47
Glossary ...........................................................49
Specifications ...................................................50
Index ................................................. Back Cover
•Other operations during play ..........................................25
•Useful functions ..............................................................26
•Enjoying BD-Live or BONUSVIEW in BD-Video .............26
•Regarding DivX ..............................................................27
Playing music .................................................. 27
Playing still pictures ......................................... 28
•Useful functions ..............................................................28
Radio
Other devices
TV
•Assembling the speakers ...............................................12
•Speaker assembly option ...............................................13
•Setting the audio link ...................................................... 31
•Easy control only with VIERA remote control ................ 32
Other devices
STEP 1: Preparing the speakers ..................... 12
Linked operations with the TV
(VIERA Link “HDAVI ControlTM”) ...................... 31
Advanced operations
Playable discs/Cards/USB devices ................. 10
•Surround sound effects .................................................. 30
•Sound modes ................................................................. 30
•Making settings for digital audio input ............................ 30
Optional speaker
settings
•Remote control .................................................................8
•Main unit (Front) ...............................................................9
•Main unit (Rear) ................................................................9
Playback
Caution for AC Mains Lead ............................... 3
Safety precautions ............................................. 4
Reference
Radio
Listening to the Radio ...................................... 29
•Presetting stations automatically ....................................29
•Presetting stations manually ...........................................29
•Listening/confirming the preset channels .......................29
•RDS broadcasting ..........................................................29
VQT2Q52
5
SCBT735_330_230EBEPEG_VQT2Q52-B.book 6 ページ
2010年2月9日 火曜日 午前10時51分
Getting started
≥ These operating instructions are applicable to models
SC-BT735, SC-BT330 and SC-BT230. Unless otherwise
indicated, illustrations in these operating instructions
are of SC-BT735.
≥ Operations in these instructions are described mainly
with the remote control, but you can perform the
operations on the main unit if the controls are the
same.
Indicates features applicable to:
[BT735]: SC-BT735 only
[BT330]: SC-BT330 only
[BT230]: SC-BT230 only
System
SC-BT735
SC-BT330
Main unit
SA-BT735
SA-BT330
SA-BT230
Front speakers
SB-HF730
SB-HF330
SB-HF230
Centre speaker
SB-HC730
SB-HC230
SB-HC230
Surround speakers
SB-HS735
SB-HS230
SB-HS230
SB-HW330
SB-HW330
SB-HW480
Speaker system
Subwoofer
SC-BT230
≥Some models may not be on sale in certain regions.
≥Some accessories and external devices mentioned in these operating instructions that are not included with this
product may not be on sale in certain regions.
Accessory
Check the supplied accessories before using this unit.
[BT735] [BT330] [BT230]
∏ 1 Remote control
(N2QAKB000090)
∏
Speaker cable (centre)
[REEX1154]
∏
2 Batteries for
remote control
∏
1 Sheet of speaker
cable stickers
∏ 1 AC mains lead
(RFAX1022)
∏ 1 Video cable
(K2KA2BA00001)
[BT735]
∏
1 Auto speaker setup
microphone
(L0CBAY000051)
[BT330]
∏
1 Auto speaker setup
microphone
(L0CBAY000051)
4 Speaker stands
(with cable)
[RYK1609-K]
with white connector
[RYK1609A-K]
with red connector
(RFAX0024)
For Continental Europe
2 Speaker stands
(with cable)
[RYPX1041-KL]
with white connector
[RYPX1041-KR]
with red connector
∏
Speaker cables
(surround)
[REEX1155]
with grey connector
[REEX1156]
with blue connector
≥ Product numbers correct as of December 2009. These may be subject to change.
≥ Do not use AC mains lead with other equipment.
6
∏
Speaker cables
(front)
[REEX1152A]
with red connector
[REEX1153A]
with white connector
[RYK1609C-K]
with grey connector
[RYK1609B-K]
with blue connector
VQT2Q52
[BT230]
∏ 4 Bases
(RYK1610-K)
∏
∏
∏ 1 Antenna plug
adaptor
(K1YZ02000013)
For the United Kingdom
and Republic of Ireland
with green connector
For the United Kingdom
and Republic of Ireland
∏ 1 FM indoor antenna
(RSAX0002)
(surround)
[REEX1155]
with grey connector
[REEX1156]
with blue connector
∏ 8 Screws
(XTN5+10FFJK)
4 Screws
(XYN5+J16FJK)
∏ 2 Bases
(RYPX0389-K)
∏ 8 Screws
(XTN5+10FFJK)
2010年2月9日 火曜日 午前10時51分
\For\the\United\Kingdom\and\Republic\of\Ireland\customers\
∫ Sales and Support Information
Customer Care Centre
≥ For customers within the UK: 0844 844 3852
≥ For customers within the Republic of Ireland: 01 289 8333
≥ Visit our website for product information
www.panasonic.co.uk
≥ Or go on line through our Internet Accessory ordering application at
www.pas-europe.com
≥ Most major credit and debit cards accepted.
≥ All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
≥ It couldn’t be simpler!
≥ Also available through our Internet is direct shopping for a wide range
of finished products, take a browse on our website for further details.
Getting started
SCBT735_330_230EBEPEG_VQT2Q52-B.book 7 ページ
≥ E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
≥ For customers: 0844 844 3856
≥ Order accessory and consumable items for your product with ease
and confidence by phoning our Customer Care Centre
Monday–Thursday 9:00 a.m.–5:30 p.m., Friday 9:30 a.m.–5:30 p.m.
(Excluding public holidays)
Unit and media care
∫ Clean this unit with a soft, dry cloth
Using the remote
control
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Insert so the poles (i and j) match those in the remote
control.
∫ Clean the lens with the lens cleaner
Lens cleaner: RP-CL720E
≥ This lens cleaner may not be available for sale in all
countries, e.g. not available in Germany, please consult
your Panasonic dealer for advice.
≥ This lens cleaner is primarily for use on Panasonic DVD
recorders (DIGA), but it is also suitable for use on this unit.
R6/LR6, AA
(Alkaline or manganese
batteries)
∫ Clean discs
DO
DO NOT
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or
labels (rented discs etc).
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
Point it at remote control signal sensor on this unit. (> 9)
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (> 43, “To return to the factory
preset.”)
≥ The operation history may be recorded in the memory of this
unit.
VQT2Q52
7
SCBT735_330_230EBEPEG_VQT2Q52-B.book 8 ページ
2010年2月9日 火曜日 午前10時51分
Control reference guide
1
VOL
3
1 2abc 3def
4ghi 5jkl 6mno
7pqrs 8tuv 9wxyz
CANCEL 0
PIP
BD/SD
4
1
2
3
AV
2
iPod
SEARCH
PLAY
VOL
MUTE
RADIO
EXT-IN
SEARCH
14
15
16
SKIP
18
STOP
STATUS
6
EN
U
19
P
M EN U
OK
8
11
12
11
21
12
13
RETURN
OPTION
9
10
20
-UP
7
START
9
10
EXIT
OP
DIRECT
NA
TOP M VIGAT
OR
SKIP
PAUSE
4
5
6
7
8
17
SLOW
5
Remote control
13
TV
22
SOUND SURROUND DISPLAY
-CH SELECT
-SLEEP
AUDIO
23
14
15
24
16
17
18
19
20
21
22
23
24
Turn the unit on and off (> 19)
Display the Home screen of VIERA CAST (> 34)
Select title numbers, etc./Enter numbers or characters
(> 34)
[CANCEL] : Cancel
Basic playback control buttons (> 25)
Select preset radio stations (> 29)
Show status messages (> 25)
Show Top Menu/DIRECT NAVIGATOR (> 25)
[3, 4, 2, 1]: Menu selection
[OK]: Selection
[2, 1]: Select preset radio station (> 29)
[2] (2;), [1] (;1): Frame-by-frame (> 25)
Show OPTION menu (> 26)
Coloured buttons (red, green yellow, blue)
These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
(> 28)
≥ Operating contents of VIERA CAST (> 34)
Set the sound mode (> 24)/Select speaker channel
(> 24)
Select surround sound effects (> 24)
TV operation buttons
You can operate the TV through the unit’s remote control.
[Í]: Turn the television on and off
[AV]: Switch the input select
[i j VOL] : Adjust the volume
Adjust the volume of the main unit
Mute the sound
≥ “MUTE” flashes on the unit’s display, while the function is
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the unit is turned off.
Switch on/off Secondary Video (Picture-in-picture) (> 26)
Select the source
[BD/SD]: Select disc drive or SD card drive (> 23)
[iPod]: Select iPod/iPhone as the source (> 23, 33)
[RADIO/EXT-IN]: Select FM tuner, USB or external audio
as the source (> 23, 29, 30)
Select radio stations manually (> 29)
Exit the menu screen
Show START menu (> 23)
Show Pop-up menu (> 25)
Return to previous screen
Select audio (> 25)
Show Playback menu (> 34)/Set the sleep timer
1 Press and hold [jSLEEP].
2 While “SLEEP ££” is displayed, press [jSLEEP]
several times to select the time (in minutes).
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when cancelling the setting.
≥ To confirm the remaining time
Press and hold the button again.
VQT2Q52
8
SCBT735_330_230EBEPEG_VQT2Q52-B.book 9 ページ
2010年2月9日 火曜日 午前10時51分
Getting started
Main unit (Front)
e.g., [BT735]
1 2
4
3
5
VOLUME
OPEN/CLOSE
iPod
Pull open.
SD CARD
6
1
2
3
4
5
6
7
SETUP MIC
7
8
Standby/on switch (Í/I) (> 19)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Power indicator
The indicator lights when this unit is turned on.
Connect iPod/iPhone (> 32)
Adjust the volume of the main unit
Open or close the disc tray (> 22)
Disc tray
SD card slot (> 22)
SELECTOR
9
10
11 12
13 14
8 USB port (> 22)
9 [BT735] [BT330] Connect Auto speaker setup microphone
10 Display (FL display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
11 Remote control signal sensor
Distance: within approx. 7 m.
Angle: Approx. 20e up and down, 30e left and right
12 Select the source (> 23)
13 Stop (> 25)
14 Start play (> 25)
∫ If the front cover comes off
1 Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
Main unit (Rear)
1
2
3
4
5
6
7
8
DIGITAL AUDIO IN
AC IN
OPTICAL
L


6
5
6Ω
6Ω
SUBWOOFER CENTER
2
1
R 3Ω L
FRONT
4
3
R 3Ω L
SURROUND
AC IN terminal (> 18)
Speaker terminals (> 15)
Cooling fan
USB port for optional wireless adaptor (> 18)
HDMI AV OUT terminal (> 17)
FM radio antenna terminal (> 15)
7
DIGITAL AUDIO IN terminals (> 16 , 17)
Terminal 1 is designated for connection with the TV.
Terminal 2 can be used with equipment other than the
STB.
DIGITAL TRANSMITTER
R
(10BASE-T/
100BASE-TX)
(ARC)
9
1
2
3
4
5
6
2
AV
OUT
LAN
WIRELESS
LAN
1
VIDEO
OUT AUX
FM ANT
(75Ω)
10 11
8
Digital transmitter dock (> 14)
Connect a digital transmitter when using an optional
wireless system.
9 LAN port (> 18)
10 VIDEO OUT terminal (> 16)
11 AUX terminal (> 16)
VQT2Q52
9
SCBT735_330_230EBEPEG_VQT2Q52-B.book 10 ページ
2010年2月9日 火曜日 午前10時51分
Playable discs/Cards/USB devices
Type
Logo examples
[BD]
Type detail
BD-Video
Video
BD-RE
Video
JPEG
BD-R
Video
DivX®
DVD-Video
Video
DVD-RAM
Video
AVCHD
JPEG
DVD-R
[DVD]
DVD-R DL
DVD-RW
—
[CD]
—
Playable contents*
+R/+RW/+R DL
Video
AVCHD
DivX
MP3
JPEG
Video
AVCHD
Music CD
Music [CD-DA]
CD-R
CD-RW
DivX
Music [CD-DA]
MP3
JPEG
SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
MPEG2
AVCHD
SDXC Memory Card (48 GB, 64 GB) JPEG
SDHC Memory Card (4 GB to 32 GB)
[SD]
(Includes microSDHC Card)
(Includes microSDXC Card)
(as of December 2009)
[USB]
—
USB device
(up to 128 GB)
* See page 11, 46–47 for more information on the types of content that can be played.
VQT2Q52
10
DivX
MP3
JPEG
2010年2月9日 火曜日 午前10時51分
∫ Discs that cannot be played in this unit
Any other disc that is not specifically supported or
previously described.
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ HD DVD
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the
region code “B”.
Example:
∫ SD card
≥ MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ Keep the Memory Card out of reach of children to
prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ Useable memory may be slightly less than the card capacity.
Getting started
SCBT735_330_230EBEPEG_VQT2Q52-B.book 11 ページ
∫ USB device
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “2” or “ALL”.
Example:
2
ALL
1
2
≥ This unit supports connecting a USB memory, digital camera
and video camera produced by Panasonic, etc. It is not
warranted that all USB devices will work with this unit.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play on
this unit. Please refer to the recorder’s instructions.
∫ BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master
Audio) adopted in BD-Video. In order to enjoy these audio
formats, refer to page 38.
∫ Music CD
Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files
were created.
≥ The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read
the disc’s instructions carefully.
VQT2Q52
11
SCBT735_330_230EBEPEG_VQT2Q52-B.book 12 ページ
2010年2月9日 火曜日 午前10時51分
STEP 1: Preparing the speakers
Assembling the speakers
Preparation
[BT735] [BT330]
Caution
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
[BT735]
2 Front speakers
2 Surround speakers
4 Stands (with cables)
4 Bases
8 Screws A
4 Screws B
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 42.
≥ Keep the screws out of reach of children to prevent
swallowing.
[BT330]
2 Front speakers
2 Stands (with cables)
2 Bases
8 Screws
A
B
[BT735]
1
Back of the base
Pull the cable
straight along
the line and
slide into the
groove.
Tighten
securely.
Screw A
2
Insert the wire fully.
r: White
s: Blue line
Push!
Screw B
Leave about 80 mm
Press into the groove.
2
1
Tighten securely.
[BT330]
1
Slide into the groove.
Screw
2
Tighten securely.
2
Insert the wire fully.
r: White
s: Blue line
Push!
Position the cable
between the ridges.
VQT2Q52
12
Press into the groove.
Tighten securely.
Leave about 120 mm
1
3
2010年2月9日 火曜日 午前10時51分
Use of the speaker cable stickers is convenient
when making cable connections.
e.g. Front speaker (L)
4
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
e.g. Surround speaker [BT230]
FRONT
Lch

r: White
s: Blue line


Getting started
SCBT735_330_230EBEPEG_VQT2Q52-B.book 13 ページ
A Speaker cable sticker (included)
B Connector
Speaker cable sticker
Colour
1 FRONT (L)
WHITE
Push!
2 FRONT (R)
RED
3 SURROUND (L)
BLUE
4 SURROUND (R)
GREY
5 CENTRE
GREEN
6 SUBWOOFER
PURPLE
Be sure to match the number on each sticker with the
connector colour.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify
the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables
with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the
speaker when carrying.
Speaker assembly option
[BT330]
Thread the speaker cable
through the base.
Attach the speaker.
Insert the wire fully.
Push!
r: White
s: Blue line
Leave about 120 mm
Press into the groove.
Tighten securely.
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 42.
Slide into the
groove.
[BT735] [BT330]
∫ Preventing the speakers from falling
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.
e.g., [BT735]
A String (not included)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not included)
D Wall
E Approx.150 mm





VQT2Q52
13
SCBT735_330_230EBEPEG_VQT2Q52-B.book 14 ページ
2010年2月9日 火曜日 午前10時51分
STEP 2: Positioning
Caution
≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls using methods other than those described in this
manual.
≥ Do not touch the front netted area of the speakers. Hold by the sides.
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, centre, surround speakers at approximately
the same distance from the seating position.
The angles in the diagram are approximate.
[BT735] [BT330]
Using “Auto Speaker Setup” (> 19) is a convenient way to get
the ideal surround sound from your speakers when you are
unable to place them.
≥ Keep your speakers at least 10 mm away from the system for proper
ventilation.

60°

120°


A Centre speaker
Put on a rack or shelf. Vibration caused by the speaker can
disrupt the picture if it is placed directly on the TV.
B Front speakers
C Subwoofer
D Surround speakers
≥ Place the speakers at the same height or higher than ear
level.
You can enjoy surround speaker
sound wirelessly when you use the
optional Panasonic wireless
accessory (SH-FX71).
For more details, refer to the operating
instructions for the optional wireless
system.
VQT2Q52
14
If it persists, move the speakers further away from the TV.
∫ Upgrade your system to 7.1-channel
system
The main unit is designed to enjoy the 7.1ch surround sound.
By connecting 2 units of the Panasonic wireless system
SH-FX71 with 4 speakers, more theatre-like effect can be
available.
Necessary equipment:
≥ 2 optional wireless systems (SH-FX71)
≥ 2 additional speakers
[Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]


∫ If irregular colouring occurs on your TV,
turn the TV off for about 30 minutes.
≥ Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Positioning speakers in front
It is possible to locate all the speakers in front of the listening position.
However, the optimal surround sound effect may not be obtainable.
≥ Place speakers on flat secure bases.
≥ Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 42.
For more details, refer to the operating instructions for the
optional wireless system.
SCBT735_330_230EBEPEG_VQT2Q52-B.book 15 ページ
2010年2月9日 火曜日 午前10時51分
STEP 3: Connections
Getting started
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Speaker cable connection
Connect to the terminals of the same colour.
6 PURPLE Subwoofer






5 GREEN
Centre speaker
2 RED
Front speaker (Rch)
1 WHITE
Front speaker (Lch)
4 GREY
Surround speaker (Rch)
3 BLUE
Surround speaker (Lch)
When using the optional wireless
system, do not attempt to connect
any extra surround or surround
back speakers to the main unit.
AC IN
+
6
5
6Ω
6Ω
SUBWOOFER CENTER
2
1
R 3Ω L
FRONT
Main unit
4
3
R 3Ω L
SURROUND
Radio antenna connection
Using an indoor antenna

Main unit

A FM indoor antenna (included)
B Adhesive tape
Affix this end of the antenna where reception is best.
FM ANT
(75 )
Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
e.g.,

Main unit
FM ANT
(75Ω )


A FM outdoor antenna [Using a TV antenna
(not included)]
The antenna should be installed by a competent technician.
B 75 ≠ coaxial cable (not included)
C Antenna plug adaptor (United Kingdom and Republic of Ireland
only)
≥ Keep the adaptor out of reach of children to prevent swallowing.
VQT2Q52
15
SCBT735_330_230EBEPEG_VQT2Q52-B.book 16 ページ
2010年2月9日 火曜日 午前10時51分
Connection to a TV
The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize
your system setting.
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection.
≥ Please use High Speed HDMI Cables that have the HDMI
∫ OPTICAL IN
logo (as shown on the cover). It is recommended that you
≥ After making the digital audio connection, make settings to
use Panasonic’s HDMI cable. When outputting 1080p signal,
suit the type of audio from your digital equipment (> 30).
please use HDMI cables 5.0 meters or less.
Recommended part number:
∫ HDMI
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
The HDMI connection supports VIERA Link “HDAVI Control”
RP-CDHS50 (5.0 m), etc.
(> 31) when used with a compatible Panasonic TV.
Basic connection
VIDEO IN
TV
AUDIO IN
AUDIO OUT
L
L
R
R


AUX
A Video cable (included)
B Audio cable (not included)
L
AV
OUT
R
VIDEO OUT
VIDEO
AUX
OUT AUX
≥To enjoy TV audio from this home theatre system’s speakers, select “AUX (TV)” as a source (> 23).
Connection for the better audio
VIDEO IN
TV
OPTICAL
OUT
AUDIO IN
L
R


DIGITAL AUDIO IN
OPTICAL
L
R
VIDEO
VIDEO
AUX
OUT
OUT
1
2
OPTICAL 1
A Video cable (included)
B Optical digital audio cable (not included)
VIDEO OUT
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source.
e.g.,
VIDEO IN
16

AV1
VQT2Q52

If the TV does not have a VIDEO IN terminal, connect using
a Scart adaptor (Scart—VIDEO IN).
A Scart adaptor (not included)
B Video cable (included)
SCBT735_330_230EBEPEG_VQT2Q52-B.book 17 ページ
2010年2月9日 火曜日 午前10時51分
TV
Getting started
Connection for the best picture and audio
OPTICAL
OUT
AV IN


A HDMI cable (not included)
B Optical digital audio cable (not included)
≥ For the TV audio, an audio cable (not included) can be also
used by connecting the AUX terminal with the AUDIO OUT
terminal on the TV.
DIGITAL AUDIO
AUDIO ININ
DIGITAL
OPTICAL
OPTICAL
L
1
2
AV
OUT
R
VIDEO
OUT AUX
(ARC)
OPTICAL 1
HDMI AV OUT (ARC)
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 1 (TV)” or “D-IN 1” as a source (> 23).
ARC (Audio Return Channel)
(Available when using an ARC compatible TV)
With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cables.
≥Select “ARC (TV)” as the audio input source (> 23)
≥Refer to the operating instructions of the TV for the settings to output digital audio.
Connection with Set Top Box, etc.
Refer to the operating instructions of the respective
devices for the optimal connections.

TV
OPTICAL
OUT

DIGITAL AUDIO IN
OPTICAL
L
R
WIRELESS
LAN
LAN
1
2
OPTICAL 2
DIGITAL TRANSMITTER
A Optical digital audio cable (not included)
B Set Top Box, cable TV, VCR, DVD recorder, etc.
AUX
≥To enjoy TV audio from this home theatre system’s speakers, select “DIGITAL IN 2 (CABLE/SAT)” or “D-IN 2” as a source
(> 23).
NECESSARY SETTINGS
≥ “HDMI Audio Output” : “Off” (> 39)
VQT2Q52
17
SCBT735_330_230EBEPEG_VQT2Q52-B.book 18 ページ
2010年2月9日 火曜日 午前10時51分
Connection to a broadband network
The following services can be used when this unit is connected
to broadband.
≥ Firmware can be updated (> 21)
≥ You can enjoy the BD-Live (> 26)
≥ You can enjoy VIERA CAST (> 34)
≥ DLNA feature (> 36)
∫ Using LAN (ethernet) cable
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ The unit is not compatible with public wireless LAN services
(Hotspot etc.) provided in airports, stations, cafes etc.
∫ Using Wireless LAN Adaptor (optional)
LAN
VIDEO
OUT
(10BASE-T/
100BASE-TX)
WIRELESS
LAN


≥ Only the Wireless
LAN Adaptor
DY-WL10 (optional)
can be used.




A LAN Cable [Straight]
(not included)
B Broadband router, etc.
C Internet
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
A Wireless LAN Adaptor
B Wireless router (Access point), etc.
C Internet
≥ Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
STEP 4: AC mains lead connection
\For\the\United\Kingdom\and\Republic\of\Ireland\only\
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
≥ Connect only after all other connections are complete.
≥ The main unit consumes a small amount of AC power, even
when it is turned off (When the “Quick Start” setting is “Off”,
[BT735] [BT330]: approx. 0.1 W, [BT230]: approx. 0.2 W). In the
interest of power conservation, if you will not be using this
unit for a long time, unplug it from the household mains
socket.
≥ Do not use any other AC mains lead except the supplied one.
VQT2Q52
18
AC IN


Main unit
A AC mains lead (included)
B To a household mains
socket
SCBT735_330_230EBEPEG_VQT2Q52-B.book 19 ページ
2010年2月9日 火曜日 午前10時51分
The Smart setup/Easy setup assists you to make
necessary settings.
Follow the on-screen prompts to make basic settings for the
system.
[BT735] [BT330]: Smart setup
[BT230]: Easy setup
1
2
Press [Í].
Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Getting started
STEP 5: Smart setup / Easy setup
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
[BT230]: Speaker check
Check if the connection to each speaker is valid.
OK
[BT735] [BT330]: Auto Speaker Setup
Adjust the speaker output level automatically.
OK
Speaker Output
Make surround sound setting for speaker output.
Cinema Surround
The function creates the sound of virtual speakers to
enhance the realistic surround feeling as if the sound
comes from all directions.
(Speakers position: Surround Layout only)
(Effective when playing video with 5.1/7.1ch audio)
Preparation
≥ Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to
this unit.
≥ [BT735] [BT330]: Place the Auto speaker setup microphone at
the actual seating position. (At ear level when seated.)
TV Audio
Select the audio input connection from your TV,
[item with “(TV)”].
Quick Start
Speed of startup from standby mode is increased.
e.g., [BT735]
SETUP MIC
3
Press [OK] several times to finish the
“Smart setup” or “Easy setup”.
After completing “Smart setup” or “Easy setup”, you can
perform “Network Easy Setting”.
≥ You can perform this setup anytime by selecting “Smart setup” or “Easy
setup” in the Setup menu. (> 40)
≥ Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
≥ Keep as quiet as possible during the Auto speaker setup. Excessive
background noise may lead to incorrect settings.
≥ The speakers output loud test signals during setup.
≥ After the Smart setup is completed, unplug the Auto speaker setup
microphone and keep it for future use.
VQT2Q52
19
SCBT735_330_230EBEPEG_VQT2Q52-B.book 20 ページ
2010年2月9日 火曜日 午前10時51分
Network Easy Setting
Select “Wired” or “Wireless” and press [OK].
Network Easy Setting (Connection Test)
2 Press [RETURN] and then press [OK].
Then select an item on the following screen which
corresponds to the authentication type noted down in step
1 (> left).
Access Point Connection Setting
Select a connection mode.
Current setting
: Wired
Select authentication type.
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
WPA2-PSK (AES/TKIP)
WPA-PSK (AES/TKIP)
Open/Shared Key (WEP)
Open system
Wired
Wireless
OK
RETURN
Follow the on-screen instructions to make the settings.
≥ Input your encryption key code in “Encryption Key”
supplied with your Wireless router (Access point).
∫ “Wired” connection
Follow the on-screen instructions to make your connection
settings.
≥ When you experience problems (> right)
∫ “Wireless” connection
If you select “Wireless” and “Wireless LAN Adaptor is not
connected.” is displayed, check that the Wireless LAN Adaptor
is fully inserted. Alternatively, disconnect and reconnect it. If
there is still no change in the display, consult your dealer for
advice.
Select “WPS (PUSH button)” or “Search for
access point” and then follow the on-screen
instructions and make the settings.
When you experience
problems with settings
Access Point Connection Setting
Access Point Connection Setting
Failed to connect to the access point.
A conflict with other devices occurred.
Do you wish to setup Access Point
Connection Setting again ?
Yes
No
OK
Access Point Connection Setting
Select a connection method for access to
Wireless LAN.
Please refer to the operating instructions of
the access point about connection methods.
Display
Check the following
WPS (PUSH button)
A conflict with another
device occurred.
Search for access point
A time out error occurred.
WPS (PUSH button):
e.g.,
If your Wireless router (Access point)
supports WPS (PUSH button), you can
easily perform the settings by pressing
WPS button on it.
WPS (Wi-Fi Protected Setup) is a
1
standard that facilitates settings relating
to the connection and security of
wireless LAN devices.
1 Press WPS button or corresponding button of Wireless
router (Access point) until the lamp starts flashing.
≥ For details, refer to the operating instruction of Wireless
router (Access point).
2 Press [OK].
*1
Wi-Fi Protected Setup-compatible Wireless router (Access point) may
have the mark.
Search for access point:
Available Wireless routers (Access points) are searched and
listed. You can select the one to use from the list.
1 Press [3, 4] to select SSID*2 of Wireless router (Access
point) you want to connect with. Then press [OPTION] to
show information of the selected router, make a note of the
authentication and encryption type.
Access Point Connection Setting
Select an access point to connect with.
To search for access point again, please
select "Search again" below.
Reception
SSID
VQT2Q52
20
≥ Please wait a few moments,
and then try again.
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
SSID
XXXXXXXXXX
Wireless type
XXXXXXXXXX
Authentication type
XXXXXXXXXX
Encryption type
XXXXXXXXXX
XXXXXXXXXX
:XXXXXXXXXXXXXXX
:802.11n/g/b (2.4GHz)
:WPA-PSK
:AES
Search again
OK
≥ If you can not find the SSID*2, select “Search again”.
≥ Setting of the Wireless
router (Access point) for
MAC Address etc.
≥ The signal may be weak.
Using the USB extension
cable supplied with the
An authentication error or a
Wireless LAN Adaptor,
time out error occurred.
adjust the position of the
Wireless LAN Adaptor.
≥ The SSID*2 and the
encryption key of the
Wireless router (Access
point).
≥ Please wait a few moments,
and then try again.
A device error occurred.
≥ Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, consult your
dealer.
2010年2月9日 火曜日 午前10時51分
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
Network Easy Setting (Connection Test)
Network Easy Setting (Connection Test)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
: Fail
: Fail
: Fail
*2
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
This is a name given to identify specific networks among wireless LANs.
When the SSID is the same in two devices, data can be transmitted
between them.
Select “No” and press [OK] to finish Network
Easy Setting.
Yes
No
Firmware updating
OK
Check the
following
Display
1. LAN cable connection or
Connection to access point
:Fail
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Home
network
available
3. Connection to gateway
:Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting
:Pass
3. Connection to gateway
:Fail
≥ Connection of
the LAN
cables
(> 18)
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address /
DNS
Settings”
(> 40)
Network Easy Setting (Internet Connection Test)
: Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
RETURN
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (> 40, “System
Information”)
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
The firmware has been updated.
Current Installed Version: x.xx
OK
Check the following
Cannot find the server. ≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address /
(B019)
DNS Settings” (> 40)
Failed to connect to
the server.
(B020)
No
OK
OK
Display
Getting started
SCBT735_330_230EBEPEG_VQT2Q52-B.book 21 ページ
≥ The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (> 40) and the router
RETURN
≥ You can perform update anytime by selecting “Firmware Update” in the
Setup menu. (> 40)
≥ Downloading will require several minutes. It may take longer or may not
work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 40)
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 40)
≥ You can redo these settings individually using “Network Settings”. (> 40)
≥ Do not connect to a wireless network for which you do not have usage
rights. Wireless networks for which you do not have usage rights (SSID*2)
may appear during the automatic search for a wireless network
environment. However, if you connect, there is a risk that it will be regarded
as illegal access.
VQT2Q52
21
SCBT735_330_230EBEPEG_VQT2Q52-B.book 22 ページ
2010年2月9日 火曜日 午前10時51分
STEP 6:
Reprogramming the
remote control
Inserting or removing a
media
When other Panasonic products respond to this
remote control
Change “Remote Control” (> 40) on the main unit and the
remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
SD CARD
SETUP MIC
To change the code on the main unit.
1
2
While stopped, press [START].
Press [3, 4] to select “To Others” and
press [OK].
3
Press [3, 4] to select “Setup” and press
[OK].
4
Press [3, 4] to select “General” and press
[OK].
5
Press [3, 4] to select “Remote Control”
and press [OK].
6
Press [3, 4] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
Press and hold the numbered button (1 or
2), which has the same number you
selected in the step 6 for more than 5
seconds.
2
VQT2Q52
22
Press [OK].
≥ When inserting a media, ensure that it is facing the right way
up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media’s contents.
≥ When removing the SD card, press on the centre of the card
and pull it straight out.
≥ If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on connected
equipment. For details, refer to the instructions for the
connected equipment.
∫ To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or
“USB”.
≥ If a media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
2010年2月9日 火曜日 午前10時51分
START menu
Major functions of this unit can be operated from the START
menu.
1
2
Playlists:
You can play playlists
created on DVD-VR.
To Others
Setup: (> 37)
Press [START].
Card Management: (> 26)
Press [3, 4] to select the item and press
[OK].
To exit the screen
Press [START].
Getting started
SCBT735_330_230EBEPEG_VQT2Q52-B.book 23 ページ
e.g., BD-Video
∫ Selecting the source by the remote control
Home Cinema
START
Button
BD-Video
Source
Playback
Top Menu
BD/SD
Network
iPod
Input Selection
Sound(Equalizer)
RADIO
EXT-IN
To Others
OK
RETURN
Playback
Viewing Picture
Play back the contents.
Top Menu
(> 25)
Menu
(> 25)
Network
Home Network
(DLNA)
(> 36)
Internet Content
Displays the Home screen of
the VIERA CAST (> 34)
BD/DVD or SD card (SD) (> 25)
iPod (IPOD) (> 32)
FM Radio (FM) (> 29)
AUX*1 (> 30)
USB (> 25)
ARC*1 (> 30)
DIGITAL IN 1*1 (D-IN 1) (> 30)
DIGITAL IN 2*2 (D-IN 2) (> 30)
*1 “(TV)” is displayed next to items set for
TV AUDIO input.
*2 “(CABLE/SAT)” is displayed next to
DIGITAL IN when set for CABLE/SAT
AUDIO input.
To enjoy sound from the TV
Select one source from either “AUX (TV)”,
“ARC (TV)” or “DIGITAL IN 1 (TV)”.
Switches to each source
BD/DVD/CD
≥ Items to be displayed may vary with the media.
SD card
iPod
Input Selection
FM Radio:
To enjoy the FM radio
(> 29)
USB device
AUX*1:
To enjoy TV broadcasts with
this unit’s speakers (> 30)
ARC*1: To enjoy TV
broadcasts with this unit’s
speakers (> 30)
DIGITAL IN 1*1:
To enjoy TV broadcasts with
this unit’s speakers (> 30)
*1
“(TV)” is displayed next to
items set for TV AUDIO input.
DIGITAL IN 2*2:
To enjoy audio from other
devices with this unit’s
speakers (> 30)
*2
“(CABLE/SAT)” is displayed
next to DIGITAL IN when set
for CABLE/SAT AUDIO input.
To enjoy sound from the
TV
Select one source from
either “AUX (TV)”, “ARC
(TV)” or “DIGITAL IN 1 (TV)”.
Sound(Equalizer)
(> 24)
VQT2Q52
23
SCBT735_330_230EBEPEG_VQT2Q52-B.book 24 ページ
2010年2月9日 火曜日 午前10時51分
Enjoying sound effects
from all speakers
Enjoying surround sound
effects
1
Press [SURROUND] several times to select
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
MANUAL
≥ The selected effect will only be displayed on the main
unit.
2
While “MANUAL” is displayed, press
[2, 1] and select the desired effect.
DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in
Dolby Surround.
(except DivX)
DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
(except DivX)
7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect
using 5.1-channel speakers.
S.SURROUND (Super Surround)
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be
output to the front speakers and the subwoofer only.
∫ Adjusting speaker level during play
1 Press and hold [jCH SELECT] to activate the speaker
setting mode.
2 Press [jCH SELECT] several times to select the speaker.
Each time you press the button:
L R—) C_) RS_)RB*_) LB*_)LS_) SW
^"""""""""""""""""""""""""""""b
* When the optional surround back speakers are connected.
L R: Front speaker (left and right:only the balance
is adjustable.)
≥ Press [2, 1] to adjust the balance of the front
speakers.
C: Centre speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
VQT2Q52
24
≥ The channels not included in the playing audio will not be
displayed (subwoofer is displayed even if it is not
included).
3 Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
s6 dB to r6 dB
∫ Changing the sound modes
1 Press [SOUND] several times to select the mode.
≥ The selected mode will only be displayed on the main
unit.
2 While the selected mode is displayed
Press [2, 1] and select the desired setting.
EQ: (Equalizer)
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUB W: (Subwoofer level)
You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
≥ The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics
of your room are not optimal.
≥ The setting you make is retained, and recalled every
time you play from the same type of source.
C.FOCUS: (Centre focus)
(Effective when playing audio containing centre
channel sound.)
You can make the sound of the centre speaker seem
like it is coming from within the TV.
W.SRND: (Whisper-mode Surround)
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
≥ The sound effects/modes may not be available or have no effect with some
sources.
≥ You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
2010年2月9日 火曜日 午前10時51分
These functions may not work depending on the media and
contents.
[BD] [DVD] [CD] [SD] [USB]
Preparation
Turn on the television and select the appropriate video input on
the television.
1
2
Other operations during play
Stop
Getting started
Playing video contents
Playback
Press [∫ STOP].
The stopped position is memorised.
Press [Í] to turn on the unit.
Insert the media.
Play starts.
≥ If the menu is displayed, press [3, 4, 2, 1] to select
the item and press [OK].
≥ If play does not start, press [1 PLAY].
∫ To show menus
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [OPTION] and
selecting “Pop-up Menu”.
Resume play function
Press [1 PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫ STOP] several times to display “STOP” on unit’s display.
≥ On BD-Video discs including BD-J (> 49), the resume
play function does not work.
Playback
SCBT735_330_230EBEPEG_VQT2Q52-B.book 25 ページ
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1 PLAY] to restart play.
Search/Slow-motion
Search
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
e.g. BD-Video
While playing, press [SEARCH6] or [SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or [SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH5]
only.
The speed increases up to 5 steps.
≥ Press [1 PLAY] to revert to normal playback speed.
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
 T1
C1
BD-Video
0:05.14
0:20.52
Current position
Skip
PLAY
Total time
≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is output
as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC
Contents Output” for NTSC discs. (> 38)
≥ Depending on media and contents, the display may change or may not
appear.
≥ DivX: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have been
dragged and dropped, copied and pasted to the media.
While playing or paused, press [SKIP:] or [SKIP9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
≥ DivX: Backward direction [SKIP:] only.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ Press [1 PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language (> 47), etc.
VQT2Q52
25
SCBT735_330_230EBEPEG_VQT2Q52-B.book 26 ページ
2010年2月9日 火曜日 午前10時51分
Useful functions
1
2
Press [OPTION].
Select an item and press [OK].
While DIRECT NAVIGATOR screen is displayed
Properties
To display the titles properties (recording
date, etc.)
Chapter
View
To select the chapter
To Picture
Playing still pictures (> 28)
Folder
To switch to another folder
To turn on/off secondary audio
1 Press [DISPLAY].
2 Press [3, 4] to select the “Disc” menu and press [1].
3 Press [3, 4] to select the “Signal Type” menu and press
[OK].
4 Press [3, 4] to select the “Soundtrack” under “Secondary
Video” menu and press [1].
5 Press [3, 4] to select the “On” or “Off”.
When “On” is selected, press [1] and then press [3, 4] to
select the language.
6 Press [RETURN] to exit.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (> 38).
Enjoying BD-Live discs with
Internet
While playing
Screen
Aspect
When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.
Top Menu
To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu
To display Menu.
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (> 39) is set to “4:3” or “4:3 Letterbox”,
the “Zoom” effect is disabled.
≥ Depending on the media and contents, displayed items are different.
Enjoying BD-Live or
BONUSVIEW in BD-Video
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access the
BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
1
2
3
Connect to the network. (> 18)
Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage (> 49).
Insert the disc.
∫ Deleting data/Formatting SD cards
Insert an SD card.
Press [START].
Press [3, 4] to select “To Others” and press [OK].
Press [3, 4] to select “Card Management” and press
[OK].
5 Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
1
2
3
4
Card Management
SD CARD
What is BD-Live?
In addition to the BONUSVIEW 
Download PDF

advertising