OLS Series Light Sources Features •• Rugged, dependable, tools backed with 5-Year Warranty •• Simple user interface minimizes training requirements •• Stabilized outputs for accurate loss measurements •• Wave ID supports testing up to three wavelengths simultaneously •• Field swappable output adapters provide flexibility Applications •• Link loss measurements •• Certify SM and MM links to industry standards •• Continuity check and fiber identification for maintenance restoration With more than 25 years of experience in the optical testing industry and thousands of units in use around the world, AFL is a trusted supplier of optical light sources. Backed by 5-year product warranties, these are the quality products you can trust. OLS7 Optical Laser Source Designed for use in outside plant environments •• Splash resistant controls •• Withstands one-meter drop test •• Controls designed for easy operation with gloves •• Field swappable output adapters allow access for cleaning optical port and supports multiple connector styles •• Efficient design provides long test time from globally available AA batteries. External power adapter available for extended testing or lab situations. Output Modes Supported •• Wave ID (Triple, Dual, or Single) decreases test time while reducing technician errors •• CW mode provides continuous output (no encoding) •• Test Tone (2000, 1000, 330, 270 Hz) for use in fiber identification with NOYES® brand power meters (with fiber end access) or NOYES® brand Optical Fiber Identifier (OFI) products for non-intrusive, mid-span testing OLS4 Optical Laser Source www.AFLglobal.com or (800) 321-5298, (603) 528-7780 1 © 2014, AFL, all rights reserved. OLS0-00-2000 Revision 1B, 2014-10-08 Specifications are subject to change without notice. OLS Series Light Sources OLS Series Models and Applications MODEL OLS7-FTTx OLS7-FTTH OLS7-3 OLS4 OLS2-Dual OLS1-Dual Specifications MM / SM SM SM SM MM / SM SM MM WAVELENGTHS (nm) 1310, 1490, 1625 1310, 1490, 1550 1310, 1550, 1625 850, 1300 / 1310, 1550 1310, 1550 850, 1300 APPLICATIONS FTTH Networks FTTH Networks Telecom & CATV Networks Loss Testing of SM/MM networks SM Networks, LAN/WAN Testing Ethernet, Token Ring, and FDDI Fiber Links a OPTICAL SPECIFICATIONS: OLS7 MODELS MODEL OLS7-FTTX (Single Port) OLS7-FTTH (Single Port) OLS7-3 (Single Port) Wavelength (±20 nm) 1310 nm 1490 nm 1625 nm 1310 nm 1490 nm 1550 nm 1310 nm 1550 nm 1625 nm Spectral Width 5 nm 3 nm 2 nm 5 nm 3 nm 5 nm 5 nm 5 nm 2 nm Emitter Type Laser Safety Class Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 Output Power -5 dBm (typical), 9/125 fiber Output Stability ±0.05 dB over 1 hour (after 15 minutes warm-up) ±0.1 dB over 8 hours (after 15 minutes warm-up) Tone Output 270 Hz, 330 Hz, 1 kHz, 2 kHz OPTICAL SPECIFICATIONS: OLS4, OLS2-DUAL & OLS1-DUAL MODELS MODEL OLS4 OLS4 OLS2-DUAL (MM Optical Port) (SM Optical Port) (Single Port) Wavelength 850 ±30 nm 1300 +30/-20 nm 1310 ±20 nm 1550 ±20 nm 1310 ±20 nm 1550 ±20 nm Spectral Width 45 nm (typ) 120 nm (typ) 5 nm (max) 5 nm (max) 5 nm (max) Emitter Type LED Laser Laser Safety Class Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 Output Power >-20 dBm, 62.5 μm multimode c 0 dBm, 9 μm single-mode 0 dBm, 9 μm single-mode d Output Stability ±0.1 dB over 8 hours ±0.05 dB over 1 hour (after 15 minutes warm-up) (after 5 minutes warm-up) ±0.1 dB over 8 hours (after 15 minutes warm-up) Tone Output N/A 2 kHz 270 Hz, 330 Hz, 1 kHz, 2 kHz OLS1-DUAL (Single Port b) 850 ±30 nm 1300 +30/-20 nm 45 nm (typ) 120 nm (typ) LED >-20 dBm, 62.5 μm multimode c ±0.1 dB over 8 hours (after 5 minutes warm-up) N/A GENERAL SPECIFICATIONS: ALL OLS MODELS Available Adapters SC FC, ST, LC Power 2 AA batteries, optional AC adapter Battery Life SM port: 72 hours typical (40 hours minimum). MM port: 30 hours typical (20 hours minimum) Operating Temperature -10 °C to 50 °C, 90 % RH (non-condensing) Storage Temperature -30 °C to 60 °C, 90 % RH (non-condensing) Size (H x W x D) 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) Weight 0.29 kg (0.65 lb) Notes: a. All specifications valid at 25°C unless otherwise specified. b. May be used to test 50 or 62.5 μm fiber with supplied mandrels. c. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper. d. Adjustable 2 dB. www.AFLglobal.com or (800) 321-5298, (603) 528-7780 2 © 2014, AFL, all rights reserved. OLS0-00-2000 Revision 1B, 2014-10-08 Specifications are subject to change without notice. OLS Series Light Sources Ordering Information When ordering, specify connector type at the end of model number (e.g. OLS2-DUAL-SC). All OLS models include protective rubber boot, 2 AA batteries and carry case. AC adapters are available (ordered separately), see table below. Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles and fiber types and adapter caps for most common connectors may be purchased from AFL. AFL NO. OUTPUT PORTS EMITTER TYPE AVAILABLE CONNECTORS POWER OLS7-FTTx 1 OLS7-FTTH 1 Laser FC, SC, ST, LC (2) AA, AC Laser FC, SC, ST, LC (2) AA, AC OLS7-3 OLS4 1 Laser FC, SC, ST, LC (2) AA, AC 2 LED and Laser FC, SC, ST, LC (2) AA, AC OLS2-DUAL 1 Laser FC, SC, ST, LC (2) AA, AC OLS1-DUAL 1 LED FC, SC, ST, LC (2) AA, AC 850 OUTPUT WAVELENGTHS (nm) 1300 1310 1490 1550 1625 WAVE ID TRANSMIT OLS AC Adapter and Connector Adapters DESCRIPTION FC connector adapter SC connector adapter ST connector adapter LC connector adapter Universal flip-top dust cap for UCI outputs 100-240 VAC to 9 VDC, AC adapter AFL NO. 2900-50-0002MR 2900-50-0003MR 2900-50-0004MR 2900-50-0006MR 8800-00-0072PR 4050-00-0119PR International Sales and Service Contact Information Available at www.AFLglobal.com/Test/Contacts www.AFLglobal.com or (800) 321-5298, (603) 528-7780 3 © 2014, AFL, all rights reserved. OLS0-00-2000 Revision 1B, 2014-10-08 Specifications are subject to change without notice.