Pioneer RCEPTEUR DEH-P5900IB Operating instructions

Operation Manual

Mode d

’emploi

CD Receiver

Récepteur CD

DEH-P5900IB

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference.

2

Before You Start

Information to User 5

For Canadian model 5

About this unit 5

After-sales service for Pioneer products 6

Visit our website 7

Protecting your unit from theft 7

– Removing the front panel 7

– Attaching the front panel 7

About the demo mode 7

Use and care of the remote control 8

– Installing the battery 8

– Using the remote control 8

Operating this unit

What

’s What 9

– Head unit 9

– Remote control 9

Basic Operations 10

– Power ON/OFF 10

– Selecting a source 10

– Adjusting the volume 11

Tuner 11

– Basic Operations 11

– Storing and recalling broadcast frequencies 12

– Introduction of advanced operations 12

– Storing the strongest broadcast frequencies 12

– Tuning in strong signals 13

Built-in CD Player 13


– Selecting a track directly 14


– Selecting a repeat play range 15

– Playing tracks in random order 15

– Scanning folders and tracks 15

En

– Pausing disc playback 16

– Using compression and BMX 16

– Searching every 10 tracks in the current disc or folder 16

– Using disc title functions 16

– Displaying text information on disc 17

– Selecting tracks from the track title list 17

– Selecting tracks from the file name list 17

Playing songs on iPod 18


– Browsing for a song 19

– Displaying text information on iPod 19


– Repeating play 20

– Playing songs in a random order

(shuffle) 20

– Playing all songs in a random order

(shuffle all) 20

– Pausing a song 20

Audio Adjustments 21

– Introduction of audio adjustments 21

– Using balance adjustment 21

– Using the equalizer 21

– Adjusting loudness 23

– Using subwoofer output 23

– Boosting the bass 23

– Using the high pass filter 24

– Adjusting source levels 24

Initial Settings 25

– Adjusting initial settings 25

– Selecting the display language 25

– Setting the clock 25

– Switching the warning tone 25

– Switching the auxiliary setting 26

– Switching the dimmer setting 26

Contents

– Adjusting the brightness 26

– Setting the rear output and subwoofer controller 26

– Switching the sound muting/ attenuation 27

– Switching the feature demo 27

– Switching the reverse mode 27

– Switching the Ever Scroll 27

– Activating the BT Audio source 27

– Entering PIN code for Bluetooth wireless connection 28

Other Functions 28

– Using the AUX source 28

– Turning the clock display on or off 29

– Using different entertainment displays 29

– Using the PGM button 29

Available accessories

Playing songs on USB portable audio player/

USB memory 31


– Selecting an audio file directly in the current folder 31


– Displaying text information of an audio file 32

– Selecting files from the file name list 32

XM tuner 33


– Selecting an XM channel directly 33

– Switching the XM display 33

– Storing and recalling broadcast stations 33

– Selecting a channel in the channel category 34

– Displaying the Radio ID 34

SIRIUS Satellite Radio tuner 35


– Selecting a SIRIUS channel directly 35


– Switching the SIRIUS display 36

– Switching the scroll setting 36


– Selecting a channel in the channel category 36

– Using the Game Alert function 37

– Displaying the Radio ID 38

Bluetooth Audio 38



– Connecting a Bluetooth audio player 39

– Playing songs on Bluetooth audio player 40

– Pausing a song 40

– Stopping playback 40

– Disconnecting a Bluetooth audio player 40

– Displaying BD (Bluetooth Device) address 40

– Displaying system version for repair 40

Bluetooth Telephone 41


– Setting up for hands-free phoning 41

– Making a phone call 42

– Taking a phone call 42


– Connecting a cellular phone 43

– Disconnecting a cellular phone 44

En

3

Contents

– Registering connected cellular phone 44

– Deleting a registered phone 44

– Connecting to a registered cellular phone 45

– Using the Phone Book 45

– Using the Call History 47

– Using preset numbers 48

– Making a call by entering phone number 48

– Clearing memory 48

– Setting the automatic rejecting 49

– Setting the automatic answering 49

– Switching the ring tone 49

– Echo canceling and noise reduction 49

– Displaying BD (Bluetooth Device) address 49

– Displaying system version for repair 49

Multi-CD Player 50


– Selecting a track directly 50


– Using ITS playlists 51

– Using disc title functions 52

– Using CD TEXT functions 53

DVD Player 54


– Selecting a disc 54

– Selecting a folder 54


TV tuner 56



4

En

– Storing the strongest broadcast stations sequentially 57

Additional Information

Troubleshooting 58

Understanding error messages 58

Handling guideline of discs and player 58

Dual Discs 59

Compressed audio files 59

– Example of a hierarchy 60

– Compressed audio compatibility 60

About handling the iPod 60

– About iPod settings 60

Specifications 61

Before You Start

Section

01

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user

’s right to operate the equipment.

For Canadian model

This Class B digital apparatus complies with

Canadian ICES-003.

About this unit

The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception.

WARNING

Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

CAUTION:

USE OF CONTROL OR ADJUSTMENT OR

PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

CAUTION:

THE USE OF OPTICAL INSTRUMENTS

WITH THIS PRODUCT WILL INCREASE

EYE HAZARD.

Also, this unit damage, smoke, and overheat could result from contact with liquids.

! Keep this manual handy as a reference for operating procedures and precautions.

! Always keep the volume low enough so that you can hear sounds from outside the vehicle.

! Protect this unit from moisture.

! If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed.

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.

About WMA

The Windows Media

™ logo printed on the box indicates that this unit can play back WMA data.

WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7 or later.

Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

! This unit may not operate correctly depending on the application used to encode

WMA files.

CAUTION

! Do not allow this unit to come into contact with liquids. Electrical shock could result.

En

5

Section

01 Before You Start

About MP3

Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/ or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

About AAC

AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG 2 and MPEG 4.

Several applications can be used to encode

AAC files, but file formats and extensions differ depending on the application which is used to encode.

This unit plays back AAC files encoded by iTunes ® version 6.0.5 and earlier.

iTunes is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

iPod ® compatibility

This unit can control and listen to songs on an iPod.

! iPod is a trademark of Apple Computer,

Inc., registered in the U.S. and other countries.

! This unit supports only an iPod with Dock

Connector.

! This unit does not support software versions prior to iPod update 2004-10-20. For supported versions, consult your nearest

Pioneer dealer.

! Operations may vary depending on the software version of iPod.

About the SAT RADIO READY mark

The SAT RADIO READY mark printed on the front panel indicates that the Satellite Radio

Tuner for Pioneer (i.e., XM tuner and Sirius satellite tuner which are sold separately) can be controlled by this unit. Please inquire to your dealer or nearest authorized Pioneer service station regarding the satellite radio tuner that can be connected to this unit. For satellite radio tuner operation, please refer to the satellite radio tuner owner

’s manual.

! The system will use direct satellite-to-receiver broadcasting technology to provide listeners in their cars and at home with crystal-clear sound seamlessly from coast to coast. Satellite radio will create and package over 100 channels of digital-quality music, news, sports, talk and children

’s programming.

! “SAT Radio”, the SAT Radio logo and all related marks are trademarks of Sirius Satellite Radio inc., and XM Satellite Radio

Inc.

After-sales service for

Pioneer products

Please contact the dealer or distributor from where you purchased this unit for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:

Please do not ship your unit to the companies at the addresses listed below for repair without advance contact.

6

En

Before You Start

U.S.A.

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. Box 1760

Long Beach, CA 90801-1760

800-421-1404

CANADA

Pioneer Electronics of Canada, Inc.

CUSTOMER SATISFACTION DEPARTMENT

300 Allstate Parkway

Markham, Ontario L3R OP2

1-877-283-5901

For warranty information please see the Limited Warranty sheet included with this unit.

Visit our website

Visit us at the following site:

Important

! Handle gently when removing or attaching the front panel.

! Avoid subjecting the front panel to excessive shocks.

! Keep the front panel out of direct sunlight and high temperatures.

Removing the front panel

1 Press OPEN to open the front panel.

2 Grip the left side of the front panel and pull it gently outward.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage.

Section

01

1 Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft.

2 Receive updates on the latest products and technologies.

3 Download owner

’s manuals, order product catalogues, research new products, and much more.

Attaching the front panel

% Replace the front panel by holding it upright to the unit and clipping it securely into the mounting hooks.

Protecting your unit from theft

The front panel can be detached to deter theft.

! If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 25.

About the demo mode

This unit features two demonstration modes.

One is the reverse mode, the other is the feature demo mode.

En

7

Section

01 Before You Start

Important

The red lead (ACC) of this unit should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.

Reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing BAND when power to this unit is turned off while the ignition switch is set to ACC or ON cancels the reverse mode.

Press BAND again to start the reverse mode.

Feature demo mode

The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Pressing

DISPLAY during feature demo operation cancels the feature demo mode. Press DISPLAY again to start the feature demo mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

WARNING

Keep the battery out of the reach of children.

Should the battery be swallowed, immediately consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery.

! Remove the battery if the remote control is not used for a month or longer.

! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic materials.

! In the event of battery leakage, wipe the remote control completely clean and install a new battery.

! When disposing of used batteries, please comply with governmental regulations or environmental public institutions

’ rules that apply in your country/area.

! “Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)

”

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus ( –) poles pointing in the proper direction.

! When using for the first time, pull out the film protruding from the tray.

Using the remote control

Point the remote control in the direction of the front panel to operate.

! The remote control may not function properly in direct sunlight.

Important

! Do not store the remote control in high temperatures or direct sunlight.

! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.

8

En

Operating this unit a 9 b

Section

02

What ’s What

Head unit

1 SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all the available sources.

2 MULTI-CONTROL

Move to perform manual seek tuning, fast forward, reverse and track search controls.

Also used for controlling functions.

Turn to increase or decrease the volume.

3 OPEN button

Press to open the front panel.

4 CLOCK button

Press to change to the clock display. Press and hold to change the channel select mode when XM tuner or SIRIUS tuner is selected as the source.

5 DISPLAY button

Press to select different displays.

6 SW button

Press to select the subwoofer setting menu.

Press and hold to select the bass boost setting menu.

7 EQ button

Press to select various equalizer curves.

8 LIST button

Press to display the disc title list, track title list, folder list, file list or preset channel list depending on the source.

9 BAND button

Press to select among three FM bands and one AM band and to cancel the control mode of functions.

Remote control

Operation is the same as when using the buttons on the head unit.

a VOLUME buttons

Press to increase or decrease the volume.

b FUNCTION button

Press to select functions.

c Joystick

Move to perform manual seek tuning, fast forward, reverse and track search controls.

Also used for controlling functions.

Functions are the same as

MULTI-CONTROL except for volume control.

En

9

Section

02 Operating this unit d DIRECT button

Press to directly select the desired track.

e CLEAR button

Press to cancel the input number when 0 to

9 are used.

f 0 to 9 buttons

Press to directly select the desired track, preset tuning or disc. Buttons 1 to 6 can operate the preset tuning for the tuner or disc number search for the multi-CD player.

g PGM button

Press to operate the preprogrammed functions for each source. (Refer to Using the

PGM button on page 29.) h ATT button

Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.

i ENTERTAINMENT button

Press to change to the entertainment display.

j AUDIO button

Press to select various sound quality controls.

Basic Operations

Power ON/OFF

Turning the unit on

% Press SOURCE to turn the unit on.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

Selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc in the unit (refer to page 13).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between the following sources:

XM tuner

—SIRIUS tuner—Tuner—Television

—DVD player/Multi-DVD player—

Built-in CD player

—Multi-CD player— iPod

—USB—External unit 1—External unit 2

—AUX1—AUX2—BT Audio—BT Telephone

Notes

! In the following cases, the sound source will not change:

— When there is no unit corresponding to the selected source connected to this unit.

— When there is no disc or magazine in the player.

— When the AUX (auxiliary input) is set to off

(refer to page 26).

— When the BT Audio source is set to off

(refer to Activating the BT Audio source on page 27).

! AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxiliary setting on page 26).

10

En

Operating this unit

! External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.

! When this unit’s blue/white lead is connected to the vehicle

’s auto-antenna relay control terminal, the vehicle ’s antenna extends when this unit

’s source is turned on. To retract the antenna, turn the source off.

Adjusting the volume

% Use MULTI-CONTROL to adjust the sound level.

Tuner

Basic Operations

1 2 4 5

1 Band indicator

2 Stereo ( 5) indicator

Shows when the selected frequency is being broadcast in stereo.

3 LOC indicator

Shows when local seek tuning is on.

4 Preset number indicator

5 Signal level indicator

Shows the radio wave strength.

6 Frequency indicator

1 Press SOURCE to select the tuner.

2 Press BAND to select a band.

Press BAND until the desired band is displayed, FM-1, FM-2, FM-3 for FM or AM.

3 To perform manual tuning, push

MULTI-CONTROL left or right.

4 To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing


# If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

Section

02

En

11

Section

02 Operating this unit

Note

Listening AM radio while connecting iPod to this unit may generate noise. In this case, disconnect iPod from this unit and noise is disappeared.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast frequencies for later recall.

! Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.

1 When you find a frequency that you want to store in memory press LIST.

2 Use MULTI-CONTROL to store the selected frequency in memory.

Turn to change the preset number; press and hold to store.

The preset number you have selected will flash and then remain lit. The selected radio station frequency has been stored in memory.

3 Use MULTI-CONTROL to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.


% When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit.

The selected radio station frequency has been stored in memory.

The next time you press the same preset tuning button the radio station frequency is recalled from memory.

12

En

# You can also recall radio station frequencies assigned to preset tuning numbers by pushing

MULTI-CONTROL up or down during the frequency display.

Introduction of advanced operations

1 Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2 Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to select.

The function name appears on the display.

3 Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL to switch between the functions in the following order:

BSM (best stations memory)

—Local (local seek tuning)

# You can also select the function by pressing

FUNCTION on the remote control.

# To return to the frequency display, press

BAND.

# If you do not operate functions within about

30 seconds, the display is automatically returned to the ordinary display.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under 1 to 6 on the remote control and once stored there you can tune in to those frequencies with the touch of a button.

! Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6 on the remote control.

Operating this unit

1 Use MULTI-CONTROL to select BSM in the function menu.

2 Press MULTI-CONTROL to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

# To cancel the storage process, press

MULTI-CONTROL again.





Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Use MULTI-CONTROL to select Local in the function menu.

2 Press MULTI-CONTROL to turn local seek tuning on.

# To turn local seek tuning off, press


3 Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for AM:

FM: Level 1

—Level 2—Level 3—Level 4

AM: Level 1

—Level 2

The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Built-in CD Player

Basic Operations

The built-in CD player can play back audio CD

(CD-DA) and compressed audio (WMA/MP3/

AAC/WAV) recorded on CD-ROM. (Refer to page 59 for files that can be played back.)

Read the precautions with discs and player on page 58.

1 WMA/MP3/AAC/WAV indicator

Shows the type of audio file currently playing when the compressed audio is playing.

2 Folder number indicator

Shows the folder number currently playing when the compressed audio is playing.

3 Track number indicator

4 Play time indicator

5 Bit rate/sampling frequency indicator

Shows the bit rate or sampling frequency of the current track (file) when the compressed audio is playing.

! When playing back VBR (variable bit rate)-recorded WMA files, the average bit rate value is displayed.

! When playing back VBR (variable bit rate)-recorded MP3 files, VBR is displayed instead of bit rate value.

1 Press OPEN to open the front panel.

Disc loading slot appears.

Section

02

En

13

Section


Disc loading slot

EJECT button

# To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.

2 Insert a CD (CD-ROM) into the disc loading slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

3 Close the front panel.

4 Push MULTI-CONTROL up or down to select a folder when playing a compressed audio.

# You cannot select a folder that does not have a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

5 To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

# If you select Rough search, pushing and holding MULTI-CONTROL left or right enables you to search every 10 tracks in the current disc (folder).

(Refer to Searching every 10 tracks in the current disc or folder on page 16.)

6 To skip back or forward to another track, push MULTI-CONTROL left or right.

Notes

! There is sometimes a delay between starting up disc playback and the sound being issued.

When being read, Format read is displayed.

! If an error message such as ERROR-11 is displayed, refer to Understanding error messages on page 58.

! When playing CD-EXTRA or MIXED-MODE

CDs, compressed audio and CD-DA can be switched by pressing BAND.

! If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc.

! When playing back VBR (variable bit rate) recorded files, elapsed play time may not be displayed correctly.

! When playing compressed audio, there is no sound on fast forward or reverse.

! Playback is carried out in order of file number.

Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

! When audio files are being played back, you can select track in the current folder.

1 Press DIRECT.

Track number input display appears.

2 Press 0 to 9 buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

# After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

14

En

Operating this unit

Section

02





FUNCTION.





Play mode (repeat play)

—Random mode

(random play) —Scan mode (scan play)—

Pause (pause) —Compression (compression and BMX)

—Search mode (search method)—

TitleInput "A" (disc title input)



# When playing a CD TEXT disc, you cannot switch to disc title input display. The disc title will have already been recorded on a CD TEXT disc.

# When playing compressed audio disc, you cannot switch to disc title input display.

# To return to the ordinary display, press BAND.

# If you do not operate functions except for

TitleInput "A" within about 30 seconds, the display is automatically returned to the ordinary display.

! Track repeat – Repeat just the current track

! Folder repeat – Repeat the current folder

# If you select another folder during repeat play, the repeat play range changes to disc repeat.

# When playing CD, performing track search or fast forward/reverse cancels the repeat play automatically.

# When playing compressed audio, performing track search or fast forward/reverse during

Track repeat (track repeat) changes the repeat play range to folder repeat.

# When Folder repeat (folder repeat) is selected, it is not possible to play back a subfolder of that folder.

Playing tracks in random order

Random play plays tracks in a random order within the selected repeat range.

Refer to Selecting a repeat play range on this page.


Random mode in the function menu.

2 Press MULTI-CONTROL to turn random play on.

Tracks will play in a random order.

# To turn random play off, press


Selecting a repeat play range

Repeat play plays the same track/folder within the selected repeat play range.

Also, the repeat range determines the range of random play and scan play.


Play mode in the function menu.

2 Press MULTI-CONTROL to select the repeat range.

! Disc repeat – Repeat all tracks

Scanning folders and tracks

Scan play searches the song within the selected repeat range.

Refer to Selecting a repeat play range on this page.


Scan mode in the function menu.

2 Press MULTI-CONTROL to turn scan play on.

The first 10 seconds of each track is played.

En

15

Section


3 When you find the desired track press

MULTI-CONTROL to turn scan play off.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

# After scanning of a disc (folder) is finished, normal playback of the tracks will begin again.

# To select FF/REV, press MULTI-CONTROL again.

3 Press BAND to return to the playback display.

4 Push and hold MULTI-CONTROL left or right to search every 10 tracks on a disc

(folder).

# If the rest of track number is less than 10, pushing and holding MULTI-CONTROL recalls the first (last) one.

Pausing disc playback

1 Use MULTI-CONTROL to select Pause in the function menu.

2 Press MULTI-CONTROL to turn pause on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit.


Compression in the function menu.

2 Press MULTI-CONTROL to select your favorite setting.

COMP/BMX OFF —COMP 1—COMP 2—

COMP/BMX OFF —BMX 1—BMX 2

Searching every 10 tracks in the current disc or folder

You can switch the search method between fast forward/reverse and searching every 10 tracks. Selecting Rough search enables you to search every 10 tracks.


Search mode in the function menu.

2 Press MULTI-CONTROL to select

Rough search.

! FF/REV – Fast forward and reverse

! Rough search – Searching every 10 tracks

Using disc title functions

You can input CD titles and display the title.

The next time you insert a CD for which you have entered a title, the title of that CD will be displayed.

Entering disc titles

Use the disc title input feature to store up to

48 CD titles in the unit. Each title can be up to

10 characters long.

1 Play the CD that you want to enter a title for.


TitleInput "A" in the function menu.

3 Press DISPLAY to select the desired character type.

Press DISPLAY repeatedly to switch between the following character types:

Alphabet (upper case), numbers and symbols

—Alphabet (lower case)—European letters, such as those with accents (e.g.

á, à, ä, ç)

—

Numbers and symbols

4 Push MULTI-CONTROL up or down to select a letter of the alphabet.

5 Push MULTI-CONTROL left or right to move the cursor to the previous or next character position.

16

En

Operating this unit

6 Move the cursor to the last position by pushing MULTI-CONTROL right after entering the title.

When you push MULTI-CONTROL right one more time, the entered title is stored in memory.


Notes

! Titles remain in memory, even after the disc has been removed from the unit, and are recalled when the disc is reinserted.

! After data for 48 discs has been stored in memory, data for a new disc will overwrite the oldest one.

! If you connect a multi-CD player, you can input disc titles for up to 100 discs.

! When a multi-CD player that does not support disc title functions is connected, you cannot enter disc titles in this unit.

Notes

! You can scroll to the left of the title by pressing and holding DISPLAY.

! Audio CD that contains certain information such as text and/or number is CD TEXT.

! If specific information has not been recorded on a disc, title or name is not displayed.

! Depending on the version of iTunes ® used to write MP3 files onto a disc, comment information may not be correctly displayed.

! Depending on the version of Windows Media

Player used to encode WMA files, album names and other text information may not be correctly displayed.

! The sampling frequency shown in the display may be abbreviated.

! When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 27.

Displaying text information on disc

% Press DISPLAY to select the desired text information.

For title entered CD

Play time

— : disc title and play time

For CD TEXT discs

Play time

— : disc artist name and

: track title — : disc artist name and : disc title

— : disc title and

: track title

— : track artist name and : track title

— : track title and play time

For WMA/MP3/AAC discs

Play time

— : folder name and

: file name

— : artist name and

: track title

— : artist name and : album title

— : album title and : track title

— : track title and play time

— : comment and play time

For WAV discs

Play time

— : folder name and

: file name

Selecting tracks from the track title list

Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.

1 Press LIST to switch to the track title list mode.

2 Use MULTI-CONTROL to select the desired track title.

Turn to change the track title; press to play.

# You can also change the track title by pushing



Selecting tracks from the file name list

File name list lets you see the list of file names

(or folder names) and select one of them to playback.

Section

02

En

17

Section


1 Press LIST to switch to the file name list mode.

Names of files and folders appear in the display.

2 Use MULTI-CONTROL to select the desired file name (or folder name).

Turn to change the name of file or folder; press to play; push right to see a list of the files (or folders) in the selected folder.

# You can also change the name of file or folder by pushing MULTI-CONTROL up or down.

# To return to the previous list (the folder one level higher), push MULTI-CONTROL left.

# If the folder/file number is more than 100, last

2-digit of the folder/file number is displayed.

# Number of the folders/files in the currently selected folder will be indicated on the right side of the display.


Playing songs on iPod

Basic Operations

You can use this unit to control an iPod by using a cable (e.g., CD-I200), which is sold separately.

1 Song number indicator


3 Song time (progress bar)

1 Connect the iPod to this unit.

Playback will automatically start.

While the iPod is connected to this unit,

PIONEER (or (check mark)) is displayed on the iPod.

# Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod.

# After the iPod has been connected to this unit, press SOURCE to select the iPod.

# When removing the iPod from this unit, this unit is turned off.


3 To skip back or forward to another song, push MULTI-CONTROL left or right.

Notes

! Read the precautions with iPod on page 60.

! If an error message such as ERROR-11 is displayed, refer to Understanding error messages on page 58.

! Connect directly the dock connector of this unit to the iPod so that this unit works properly.

18

En

Operating this unit

Section

02

! When the ignition switch is set to ACC or ON, the iPod

’s battery is charged while the iPod is connected to this unit.

! While the iPod is connected to this unit, the iPod itself cannot be turned on or off.

! The iPod connected to this unit is turned off about two minutes after the ignition switch is set to OFF.

Browsing for a song

The operation of this unit to control an iPod is designed to be as close to the operation of the iPod as possible for easy operation and song search.

! If playlist has been selected, first, this unit shows playlist of your iPod

’s name. This playlist plays all songs in your iPod.

! If the characters recorded on the iPod are not compatible with this unit, those characters will not be displayed.

1 Press LIST to switch to the top menu of the list search.

2 Use MULTI-CONTROL to select a category.

Turn to change the category; press to select.

Playlists (playlists)

—Artists (artists)—

Albums (albums) —Songs (songs)—Genres

(genres)

List from the selected category is displayed.

# You can start playback throughout the selected category by pressing and holding

MULTI-CONTROL.

# You can also change the category by pushing


# You can also select the category by pushing

MULTI-CONTROL right.

# To return to the previous list, push

MULTI-CONTROL left.

# To go to the top menu of the list search, push and hold MULTI-CONTROL left.

# If you do not operate the list within about 30 seconds, the list search is cancelled automatically.

3 Repeat step 2 to find a song you want to listen to.

Displaying text information on iPod

% Press DISPLAY to select the desired text information.

Play time


: song title


: album name

— : album name and : song title

— : song title and play time

# If the characters recorded on the iPod are not compatible with this unit, those characters will not be displayed.

Notes

! You can scroll to the left the text information by pressing and holding DISPLAY.

! When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the display. Refer to Switching the Ever Scroll on page 27.





FUNCTION.






—Shuffle mode

(shuffle) —Shuffle all (shuffle all)—Pause

(pause)



# To return to the playback display, press BAND.



En

19

Section


Repeating play

For playback of the songs on the iPod, there are two repeat play ranges: Repeat One (repeat one song) and Repeat All (repeat all songs in the list).

! While Play mode is set to Repeat One, you cannot select the other songs.


Play mode in the function menu.

2 Press MULTI-CONTROL to select the repeat range.

! Repeat One – Repeat just the current song

! Repeat All – Repeat all songs in the selected list

Playing songs in a random order (shuffle)

For playback of the songs on the iPod, there are two random play methods: Shuffle Songs

(play back songs in a random order) and

Shuffle Albums (play back albums in a random order).


Shuffle mode in the function menu.

2 Press MULTI-CONTROL to select your favorite setting.

! Shuffle Songs – Play back songs in a random order within the selected list

! Shuffle Albums – Select an album randomly, and then play back all the songs in it in order

! Shuffle OFF – Cancel the random play

Playing all songs in a random order (shuffle all)

This method plays all songs on the iPod randomly.

% Press and hold MULTI-CONTROL to turn shuffle all on during the playback display.

Shuffle All is displayed briefly and all songs on the iPod will play randomly.

Note

You can also turn shuffle all on in the menu that appears by using MULTI-CONTROL.

Pausing a song



Playback of the current song pauses.


20

En

Operating this unit

Section

02

Audio Adjustments

Introduction of audio adjustments

1 Audio display

Shows the audio adjustment status.



2 Use MULTI-CONTROL to select AUDIO.


The audio function name appears on the display.

3 Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL to switch between the audio functions in the following order:

Fader (balance adjustment) —Powerful (graphic equalizer adjustment) —50Hz (7-band graphic equalizer adjustment)

—LOUD (loudness)

—Sub W.1 (subwoofer on/off setting)—

Sub W.2 (subwoofer setting) —Bass (bass boost)

—HPF (high pass filter)—SLA (source level adjustment)

# You can also select the audio function by pressing AUDIO on the remote control.

# You can select the Sub W.2 only when subwoofer output is turned on in Sub W.1.

# When selecting the FM tuner as the source, you cannot switch to SLA.

# To return to the display of each source, press

BAND.


50Hz within about 30 seconds, the display is automatically returned to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats.

1 Use MULTI-CONTROL to select Fader.

# If the balance setting has been previously adjusted, Balance will be displayed.

2 Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear.

F 15 to R 15 is displayed as the front/rear speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two speakers are used.

# When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer controller on page 26.

3 Push MULTI-CONTROL left or right to adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves towards the left or right.

L 15 to R 15 is displayed as the left/right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display

Powerful

Natural

Vocal

Equalizer curve

Powerful

Natural

Vocal

En

21

Section


Custom 1

Custom 2

Custom 1

Flat

Custom 2

Flat

Super Bass (S.Bass) Super bass

! Custom 1 and Custom 2 are adjusted equalizer curves that you create. Adjustments can be made with a 7-band graphic equalizer.

! When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between

Flat and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the following equalizers:

Powerful

—Natural—Vocal—Custom 1—

Custom 2

—Flat—Super Bass (S.Bass)

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine degree (nuance control).

1 Use MULTI-CONTROL to select the graphic equalizer adjustment.

Powerful appears in the display.

If the equalizer curve has been previously selected, the curve of that previously selected will be displayed instead of Powerful.

2 Push MULTI-CONTROL left or right to select an equalizer curve.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the following order:

Powerful

—Natural—Vocal—Custom 1—

Custom 2

—Flat—Super Bass (S.Bass)

3 Push MULTI-CONTROL up or down to adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or down, the equalizer curve increases or decreases respectively.

+6 to –4 (or –6) is displayed as the equalizer curve is increased or decreased.

# The actual range of the adjustments are different depending on which equalizer curve is selected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 7-band graphic equalizer

For Custom 1 and Custom 2 equalizer curves, you can adjust the level of each band.

! A separate Custom 1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automatically.) If you make adjustments when a curve other than Custom 2 is selected, the equalizer curve settings will be memorized in Custom 1.

! A Custom 2 curve can be created common to all sources. If you make adjustments when the Custom 2 curve is selected, the

Custom 2 curve will be updated.

1 Recall the equalizer curve you want to adjust.

See Recalling equalizer curves on the previous page.

2 Use MULTI-CONTROL to select 7-band graphic equalizer adjustment.

Frequency and the level (e.g., 50Hz +4) appears in the display.

3 Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the following order:

50Hz

—125Hz—315Hz—800Hz—2kHz—

5kHz —12.5kHz

4 Push MULTI-CONTROL up or down to adjust the level of the equalizer band.

Each time MULTI-CONTROL is pushed up or down, the level of the equalization band increases or decreases.

22

En

Operating this unit

+6 to –6 is displayed as the level is increased or decreased.

# You can then select another band and adjust the level.

5 Press BAND to cancel the 7-band graphic equalizer adjustment.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Use MULTI-CONTROL to select LOUD.

2 Press MULTI-CONTROL to turn loudness on.

Loudness level (e.g., Mid) appears in the display.

# To turn loudness off, press MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to select a desired level.

Each time MULTI-CONTROL is pushed left or right, level is selected in the following order:

Low (low)

—Mid (mid)—High (high)

Push MULTI-CONTROL right to select normal phase and Normal appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer.

1 Use MULTI-CONTROL to select Sub W.2.

# You can also select the subwoofer setting menu by pressing SW on the unit.

# When the subwoofer output is on, you can select Sub W.2.

2 Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

50Hz

—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the selected range are outputted from the subwoofer.

3 Push MULTI-CONTROL up or down to adjust the output level of the subwoofer.

Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases.

+6 to –24 is displayed as the level is increased or decreased.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

1 Use MULTI-CONTROL to select Sub W.1.

# You can also select the subwoofer setting menu by pressing SW on the unit.

2 Press MULTI-CONTROL to turn subwoofer output on.

Normal appears in the display. Subwoofer output is now on.

# To turn subwoofer output off, press


3 Push MULTI-CONTROL left or right to select the phase of subwoofer output.

Push MULTI-CONTROL left to select reverse phase and Reverse appears in the display.

Boosting the bass

Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the cut-off frequency is boosted.

1 Use MULTI-CONTROL to select Bass.

# You can also select the bass boost setting by pressing and holding SW.

Section

02

En

23

Section


2 Push MULTI-CONTROL up or down to select a desired level.

0 to +6 is displayed as the level is increased or decreased.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

1 Use MULTI-CONTROL to select HPF.

2 Press MULTI-CONTROL to turn high pass filter on.

80Hz appears in the display. High pass filter is now on.

# If the high pass filter has been previously adjusted, the frequency of that previously selected will be displayed instead of 80Hz.

# To turn high pass filter off, press


3 Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

50Hz

—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.

! Settings are based on the FM tuner volume level, which remains unchanged.

1 Compare the FM tuner volume level with the level of the source you wish to adjust.

2 Use MULTI-CONTROL to select SLA.

3 Push MULTI-CONTROL up or down to adjust the source volume.

Each time MULTI-CONTROL is pushed up or down, source volume increases or decreases.

SLA +4 to SLA

–4 is displayed as the source volume is increased or decreased.

Notes

! The AM tuner volume level can also be adjusted with source level adjustments.

! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically.

! XM tuner and SIRIUS tuner are set to the same source level adjustment volume automatically.

! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.

24

En

Operating this unit

Section

02

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal performance from this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit turns off.

2 Press MULTI-CONTROL and hold until

Language select appears in the display.

# You can also perform this operation by pressing and holding FUNCTION on the remote control.

3 Turn MULTI-CONTROL to select one of the initial settings.


Language select (language selection) —Clock

(clock)

—Warning tone (warning tone)—

AUX1 (auxiliary input 1) —AUX2 (auxiliary input 2) —Dimmer (dimmer)—Brightness

(brightness)

—S/W control (rear output and subwoofer controller)

—Mute (sound muting/ attenuation)

—Demonstration (feature demo)

—Reverse mode (reverse mode)—Ever-scroll

(ever scroll)

—BT AUDIO (Bluetooth audio)—

Pin code input (pin code input)

Use the following instructions to operate each particular setting.



# BT AUDIO and Pin code input can be selected only when Bluetooth adapter (e.g., CD-

BTB100) is connected to this unit.

# To cancel initial settings, press BAND.

Selecting the display language

For your convenience, this unit equips multiple language display. You can select the language best suited to your first language.


Language select.

2 Press MULTI-CONTROL to select the language.

Each press of MULTI-CONTROL selects languages in the following order:

English

—Français—Español

Setting the clock

Use these instructions to set the clock.

1 Use MULTI-CONTROL to select Clock.

2 Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will select one segment of the clock display:

Hour —Minute

As you select segments of the clock display the segment selected will blink.

3 Push MULTI-CONTROL up or down to put a clock right.

Note

You can match the clock to a time signal by pressing MULTI-CONTROL.

! If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

! If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

En

25

Section



Warning tone.

2 Press MULTI-CONTROL to turn warning tone on.

# To turn warning tone off, press


Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 28.

1 Use MULTI-CONTROL to select AUX1/

AUX2.

2 Press MULTI-CONTROL to turn AUX1/

AUX2 on.

# To turn AUX off, press MULTI-CONTROL again.

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car ’s headlights are turned on. You can turn the dimmer on or off.

1 Use MULTI-CONTROL to select Dimmer.

2 Press MULTI-CONTROL to turn dimmer on.

# To turn dimmer off, press MULTI-CONTROL again.

Adjusting the brightness

You can adjust the display brightness. Initially this mode is set to 12.


Brightness.

2 Push MULTI-CONTROL left or right to adjust the brightness level.

0 to 15 is displayed as the level is increased or decreased.

# When dimmer is functioning, the brightness level can be adjusted 0 to 10.

Setting the rear output and subwoofer controller

This unit

’s rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker ( Rear SP :F.Range) or subwoofer ( Rear SP :S/W) connection. If you switch the rear output setting to Rear SP :S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speaker connection ( Rear SP :F.Range).


S/W control.

2 Press MULTI-CONTROL to switch the rear output setting.

Pressing MULTI-CONTROL will switch between Rear SP :F.Range (full-range speaker) and Rear SP :S/W (subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear output, select Rear SP :F.Range.

# When a subwoofer is connected to the rear output, set for subwoofer Rear SP :S/W.

Notes

! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page

23).

! If you change this setting, subwoofer output in the audio menu return to the factory settings.

! Both rear speaker leads outputs and RCA rear output are switched simultaneously in this setting.

26

En

Operating this unit

Section

02

Switching the sound muting/ attenuation

Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received.

! The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjustment is possible.

! Sound from this system returns to normal when the muting or attenuation is canceled.

1 Use MULTI-CONTROL to select Mute.

2 Press MULTI-CONTROL to switch the telephone muting/attenuation.

Pressing MULTI-CONTROL will switch between TEL ATT (attenuation) and TEL mute

(muting) and that status will be displayed.

Switching the feature demo

The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON.


Demonstration.

2 Press MULTI-CONTROL to turn the feature demo on.

# To turn the feature demo off, press


Notes

! Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

! You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off.

For more details, see Feature demo mode on page 8.

Switching the reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.


Reverse mode.

2 Press MULTI-CONTROL to turn the reverse mode on.

# To turn the reverse mode off, press


Note

You can also turn on or off reverse mode by pressing BAND while this unit is turned off. For more details, see Reverse mode on page 8.

Switching the Ever Scroll

When Ever Scroll is set to ON, text information recorded on CD or iPod scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.


Ever-scroll.

2 Press MULTI-CONTROL to turn the Ever

Scroll on.

# To turn the Ever Scroll off, press


Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

! Only when Bluetooth adapter (e.g. CD-

BTB100) is connected to this unit, you can operate this function.


BT AUDIO.

2 Press MULTI-CONTROL to turn the

BT Audio source on.

# To turn the BT Audio source off, press


En

27

Section


Entering PIN code for Bluetooth wireless connection

To connect your cellular phone to this unit via

Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.

! With some Bluetooth audio players, you may be required to enter to this unit in advance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.

! Only when Bluetooth adapter (e.g. CD-

BTB100) is connected to this unit, you can operate this function.


Pin code input.

2 Push MULTI-CONTROL up or down to select a number.

3 Push MULTI-CONTROL left or right to move the cursor to the previous or next position.

4 After inputting PIN code (up to 16 digits), press MULTI-CONTROL.

PIN code you entered is now standby to be stored in memory.

When you press MULTI-CONTROL again on the same display, the PIN code you entered is stored in this unit.

# Pushing MULTI-CONTROL right in the confirmation display returns you to the PIN code input display, and you can change the PIN code.

Other Functions

Using the AUX source

This unit can control up to two auxiliary equipments such as VCR or portable devices (sold separately). When connected, auxiliary equipments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.

About AUX1 and AUX2

You have two methods to connect auxiliary equipments to this unit.

AUX1 source:

When connecting auxiliary equipment using a stereo mini plug cable

% Insert the stereo mini plug into the input jack on this unit.

For more details, refer to the installation manual.

The allocation of this auxiliary equipment is automatically set to AUX1.

AUX2 source:

When connecting auxiliary equipment using an

IP-BUS-RCA Interconnector (sold separately)

% Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Interconnector owner

’s manual.

The allocation of this auxiliary equipment is automatically set to AUX2.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

28

En

Operating this unit

Selecting AUX as the source

% Press SOURCE to select AUX as the source.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 26.

Setting the AUX title

The title displayed for each AUX1 or AUX2 source can be changed.

1 After you have selected AUX as the source, use MULTI-CONTROL and select

FUNCTION to display TitleInput "A".

2 Enter a title in the same way as the built-in CD player.

For details concerning operation, refer to Entering disc titles on page 16.

Turning the clock display on or off

You can turn the clock display on or off.

! Even when the sources and the feature demo are off, the clock display appears on the display.

% Press CLOCK to turn the clock display on or off.

Each press of CLOCK turns the clock display on or off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 4 seconds.

Using different entertainment displays

You can enjoy entertainment displays while listening to each sound source.




ENTERTAINMENT.


3 Use MULTI-CONTROL to change the display.


BGV-1 (background visual 1)

—BGV-2 (background visual 2)

—BGP-1 (background picture

1)

—BGP-2 (background picture 2)—BGP-3

(background picture 3) —BGP-4 (background picture 4)

—SIMPLE-1 (simple display 1)—

SIMPLE-2 (simple display 2) —LEVEL METER

(level meter) —VISUALIZER1 (visualizer 1)—

VISUALIZER2 (visualizer 2)

—VISUALIZER3 (visualizer 3)

—SPECTRUM ANALYZER 1 (spectrum analyzer 1) —SPECTRUM ANALYZER 2

(spectrum analyzer 2)

—MOVIE (movie)—

ENT CLOCK (entertainment clock)

# You can also switch between the display by pressing ENTERTAINMENT on the remote control.


Using the PGM button

You can operate the preprogrammed functions for each source by using PGM on the remote control.

% Press PGM to turn pause on when selecting the following sources:

! CD – Built-in CD player

! iPod – iPod

! Multi CD – Multi-CD player

! USB – USB portable audio player/USB memory

! BT Audio – Bluetooth audio player

! DVD – DVD player/multi-DVD player

# To turn pause off, press PGM again.

% Press PGM and hold to turn BSM on when selecting tuner as the source.

Press PGM and hold until the BSM turns on.

Section

02

En

29

Section


# To cancel the storage process, press PGM again.

% Press PGM to select the desired channel select setting when selecting XM or SIRIUS as the source.

Press PGM repeatedly to switch between the following channel select settings:

Channel number (channel number select setting)

—Category (channel category select setting)

% Press PGM and hold to turn BSSM on when selecting television as the source.

Press PGM and hold until the BSSM turns on.

# To cancel the storage process, press PGM again.

30

En


Playing songs on USB portable audio player/USB memory

Basic Operations

You can use this unit to control a USB adapter, which is sold separately.

For details concerning operation, refer to the

USB adapter

’s operation manual. This section provides information on USB portable audio player/USB memory operations with this unit which differs from that described in the USB adapter

’s operation manual.

! Optimum performance of this unit may not be obtained depending on the connected

USB portable audio player/USB memory.

1 WMA/MP3/AAC indicator

Shows the type of file currently playing.

2 Folder number indicator



5 Bit rate indicator

1 Press SOURCE to select USB.

2 Push MULTI-CONTROL up or down to select a folder.

# You cannot select a folder that does not have a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.


4 To skip back or forward to another compressed audio file, push


Selecting an audio file directly in the current folder

The operation is basically the same as that of the built-in CD player.

For details concerning operation, refer to Selecting a track directly on page 14.





FUNCTION.






—Random mode

(random play)

—Scan mode (scan play)—

Pause (pause)






Function and operation

Play mode, Random mode, Scan mode and

Pause operations are basically the same as that of the built-in CD player.

Section

03

En

31

Section

03 Available accessories

Function name Operation

Play mode

Random mode

Refer to Selecting a repeat play range on page 15.

But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the USB portable audio player/USB memory are as below:

! Track repeat – Repeat just the current file


! All repeat – Repeat all files

Refer to Playing tracks in random order on page 15.

Scan mode

Pause

Refer to Scanning folders and tracks on page 15.

Refer to Pausing disc playback on page 16.

Notes

! If you select another folder during repeat play, the repeat play range changes to All repeat.

! If you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Folder repeat.

! When Folder repeat is selected, it is not possible to play back a subfolder of that folder.

! After file or folder scanning is finished, normal playback of the files will begin again.

Displaying text information of an audio file

The operation is the same as that of the builtin CD player.

Refer to Displaying text information on disc on page 17.

! If the characters recorded on the audio file are not compatible with this unit, those characters will not be displayed.

Selecting files from the file name list


Refer to Selecting tracks from the file name list on page 17.

32

En


XM tuner

Basic Operations

You can use this unit to control an XM satellite digital tuner (GEX-P920XM), which is sold separately.


XM tuner

’s operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner


! With this unit, you can operate two additional functions: XM channel direct selection and preset channel list.

1 XM band indicator

2 XM channel number indicator

3 XM preset number indicator

4 XM channel select setting indicator

Shows what channel select setting has been selected.

CH is displayed when

Channel number is selected, and CAT is displayed when Category is selected.

5 XM text information

Shows the text information of broadcast channel.

1 Press SOURCE to select the XM.

2 Press BAND to select an XM band.

Press BAND until the desired XM band is displayed, XM-1, XM-2 or XM-3.

3 To perform tuning, push


The channels move up or down step by step.

Channels that cannot currently be selected are skipped, and the next channel is selected.

# If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously.

# You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Selecting an XM channel directly

When using the remote control, you can select the XM channel directly by entering the desired channel number.

1 Press DIRECT.

Channel number input display appears.

2 Press 0 to 9 buttons to enter the desired channel number.


CLEAR.

3 Press DIRECT.

The XM channel of entered number is selected.


Switching the XM display

% Press DISPLAY to switch the XM display.

Text information (channel name)

—Artist name and text information

—Song title and text information

—Category name and text information

Storing and recalling broadcast stations

You can easily store up to six broadcast stations for later recall.

! Up to 18 stations, six for each of three XM bands can be stored in memory.

1 When you find a station that you want to store in memory press LIST.

Section

03

En

33

Section


2 Use MULTI-CONTROL to store the selected station in memory.


The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory.







% When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the

XM preset number stops flashing.

The number you have pressed will flash in the

XM preset number indicator and then remain lit. The selected station has been stored in memory.

The next time you press the same preset tuning button the station is recalled from memory.

# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down.

# To return to Channel number (channel number select setting), press and hold CLOCK again.

2 Push MULTI-CONTROL up or down to select the desired channel category.

3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Note

You can also select the XM channel select setting in the menu that appears by using

MULTI-CONTROL.

Displaying the Radio ID

Channel number select setting

If you select CH 000, the ID code is displayed.

% Push MULTI-CONTROL left or right to select CH 000.

Channel category select setting

RADIO ID is provided as a channel category for displaying the ID code.

% Push MULTI-CONTROL up or down to select RADIO ID from channel category.

# If you select another channel, display of the ID code is canceled.

# Display of the ID code repeats displaying

RADIO ID and the ID code one after the other.

Selecting a channel in the channel category

You have two methods for selecting a channel: by number and by category. Selecting

Category enables you to narrow your search down to only channels in a particular category.

1 Press and hold CLOCK to switch to

Category (channel category select setting).

CAT appears in the display.

34

En


SIRIUS Satellite Radio tuner

Basic Operations

You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately.

When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation manual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIR-

IUS operation manual.

! With this unit, you can operate one additional function: SIRIUS channel direct selection. Refer to Selecting a SIRIUS channel directly on this page.

3 To perform tuning, push


The channels move up or down step by step.

Channels that cannot currently be selected are skipped, and the next channel is selected.

# If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously.

# You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

1 SIRIUS band indicator

2 SIRIUS channel number indicator

3 SIRIUS preset number indicator

4 SIRIUS channel select setting indicator

Shows what channel select setting has been selected.

CH is displayed when

Channel number is selected, and CAT is displayed when Category is selected.

5 SIRIUS channel name

Shows the channel name of broadcast channel.

1 Press SOURCE to select SIRIUS.

2 Press BAND to select a SIRIUS band.

Press BAND until the desired SIRIUS band is displayed, SR-1, SR-2 or SR-3.

Selecting a SIRIUS channel directly

When using the remote control, you can select the SIRIUS channel directly by entering the desired channel number.

1 Press DIRECT.

Channel number input display appears.

2 Press 0 to 9 buttons to enter the desired channel number.


CLEAR.

3 Press DIRECT.

The SIRIUS channel of entered number is selected.





Section

03

En

35

Section



FUNCTION.





Channel mode (channel select mode setting)

—Team setting (team setting)—Game info

(game info)



# To return to the channel display, press BAND.



Switching the SIRIUS display

% Press DISPLAY to switch the SIRIUS display.

Channel number

—Channel name—Category name

—Artist name—Song title/program title

—Composer name

Switching the scroll setting

You can select the scroll setting, one is the continuous scroll, the other is one-time scroll.

% Press and hold DISPLAY to select the scroll setting.

Press and hold DISPLAY selects scroll setting in the following order:

Continuous scroll setting

—One-time scroll setting


You can easily store up to six broadcast stations for later recall.

! Only the remote control can operate this function.

36

En

! Up to 18 stations, six for each of three SIR-

IUS bands can be stored in memory.

% When you find a station that you want to store in memory press one of preset tuning buttons 1 to 6 and hold until the SIRIUS preset number stops flashing.

The number you have pressed will flash in the

SIRIUS preset number indicator and then remain lit. The selected station has been stored in memory.


# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down.

Selecting a channel in the channel category

You have two methods for selecting a channel: by number and by category. Selecting

Category enables you to narrow your search down to only channels in a particular category.

1 Press and hold CLOCK to switch to

Category (channel category select setting).

CAT appears in the display.

# To return to Channel number (channel number select setting), press and hold CLOCK again.

2 Push MULTI-CONTROL up or down to select the desired channel category.

3 Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Note

You can also select the SIRIUS channel select setting in the menu that appears by using

MULTI-CONTROL.


Section

03

Using the Game Alert function

Only when SIR-PNR2/SIR-PNR2C is connected to this unit, you can operate this function.

This unit can alert you when games involving your favorite teams are about to start. To use this function you need in advance to set up a game alert for the teams.

Selecting teams for Game Alert


Team setting in the function menu.

2 Push MULTI-CONTROL left or right to select a desired league.

League names are switched in the display.

3 Push MULTI-CONTROL up or down to select a desired team.

Teams in the selected category are switched in the display.

4 Press MULTI-CONTROL to store the selected team in memory.

ON is displayed with the selected team, and the Game Alert function will start on that team.

# To turn the Game Alert off of the selected team, press MULTI-CONTROL again.

# When you have already made 12 team selections, FULL is displayed and additional team selection is not possible. In this case, first delete the team selection and then try again.

5 Repeat these steps for selecting other teams.

Up to 12 teams can be selected.

Switching the Game Alert on or off

Once you made team selections, you need to turn the Game Alert function on.

! The Game Alert function is on at the default setting.


Team setting in the function menu.

2 Press and hold MULTI-CONTROL to turn the Game Alert on.

The Game Alert function is now on.

# To turn the Game Alert function off, press and hold MULTI-CONTROL again.

When the game of the selected team starts

When a game of the selected team is about to start (or is currently playing) on a different station, Game alert info is displayed. Press and hold MULTI-CONTROL to switch to that station, and you can listen to that game.

! If you do not operate the function within about 10 seconds, the display is automatically returned.

Displaying game information

If games of your selected teams are currently playing, you can display information of the games and tune to the broadcast channel.

You can display information of the games while enjoying the sound from currently tuning station. You can also tune to the broadcast channel when you wish to.


Game info in the function menu.

The game information of your selected team is displayed.

2 Push MULTI-CONTROL up or down to select a game.

The game is displayed, followed by more detailed game information.

! Game score will be updated automatically.

3 Press and hold MULTI-CONTROL to switch to that station to listen to the game.

Notes

! If you have not made any team selections,

NOT SET is displayed.

! When games involving your favorite teams are not currently playing, NO GAME is displayed.

En

37

Section


Displaying the Radio ID

If you select CH 000, the ID code is displayed.

% Push MULTI-CONTROL left or right to select CH 000.

Bluetooth Audio

Basic Operations

If you connect Bluetooth adapter (e.g. CD-

BTB100) to this unit, you can control Bluetooth audio player via Bluetooth wireless technology.

Important

! Depending on the Bluetooth audio player connected to this unit, the available operations with this unit are limited to the following two levels:

— Lower level: Only playing back songs on your audio player is possible.

— Higher level: Playing back, pausing, selecting songs, etc., are possible (all the operations illustrated in this manual).

! Since there are a number of Bluetooth audio players available on the market, operations with your Bluetooth audio player using this unit vary in great range. Please refer to the instruction manual that came with your Bluetooth audio player as well as this manual while operating your player on this unit.

! Information about songs (e.g. the elapsed playing time, song title, song index, etc.) cannot be displayed on this unit.

! While you are listening to songs on your Bluetooth audio player, please refrain from operating on your cellular phone as much as possible. If you try operating on your cellular phone, the signal from your cellular phone may cause a noise on the song playback.

! When you are talking on the cellular phone connected to this unit via Bluetooth wireless technology, the song playback from your Bluetooth audio player connected to this unit is muted.

! Even if while you are listening to song on your

Bluetooth audio player you switch to another source, the playback of song continues to elapse.

38

En



Bluetooth adapter

’s operation manual. This section provides brief information on Bluetooth audio player operations with this unit which slightly differes or is cut short from that described in the Bluetooth adapter


! Even though your audio player does not contain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technology. To control your audio player by using this unit, connect a product featuring Bluetooth wireless technology

(available on the market) to your audio player and connect Bluetooth adapter (e.g.

CD-BTB100) to this unit.

1 Device name

Shows the device name of the connected

Bluetooth audio player (or Bluetooth adapter).

1 Press SOURCE to select Bluetooth audio player.

# If you cannot display BT Audio, first activate the BT audio source in the initial setting. For detailes, refer to Activating the BT Audio source on page 27.

# For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wireless connection. (Refer to Connecting a Bluetooth audio player on this page.)







FUNCTION.


The function name appears in the display.



Connection open (connection open)

—

Disconnect audio (disconnect audio)

—Play

(Play)

—Stop (Stop)—Pause (pause)—

Device info. (device information)

# If a Bluetooth audio player is connected via lower level, only Disconnect audio and

Device info. appear in the function menu.

# If a Bluetooth audio player has not been connected to this unit yet, Connection open and

Device info. appear in the function menu and other functions are not available.





Connection open and Disconnect audio within about 30 seconds, the display is automatically returned to the ordinary display.

Connecting a Bluetooth audio player


Connection open in the function menu.

Section

03

En

39

Section


2 Press MULTI-CONTROL to open the connection.

Always Waiting is displayed. This unit is now on standby for connection from Bluetooth audio player.

If your Bluetooth audio player is set ready for

Bluetooth wireless connection, the connection to this unit will be automatically established.

Note

Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documentation. Enter the PIN code referring to Entering PIN code for Bluetooth wireless connection on page 28.

Playing songs on Bluetooth audio player

1 Use MULTI-CONTROL to select Play in the function menu.

2 Press MULTI-CONTROL to start playback.

Disconnecting a Bluetooth audio player


Disconnect audio in the function menu.

2 Press MULTI-CONTROL to disconnect the Bluetooth audio player.

Disconnected is displayed. The Bluetooth audio player is now diconnected from this unit.

Displaying BD (Bluetooth

Device) address


Device info. in the function menu.

The device name ( Pioneer BT Unit) of this unit appears in the display.

2 Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

Pausing a song



Playback of the current song pauses.


Stopping playback

1 Use MULTI-CONTROL to select Stop in the function menu.

2 Press MULTI-CONTROL to stop the playback.

Playback of the current song stops.

Displaying system version for repair




2 Push MULTI-CONTROL down to switch to the system version of this unit.

The system (microprocessor) version of this unit is displayed.

# Pushing MULTI-CONTROL left displays the version of the Bluetooth module of this unit.

Pushing MULTI-CONTROL right returns to the system version of this unit.

40

En


Section

03

Bluetooth Telephone

Basic Operations

If you use Bluetooth adapter (e.g. CD-BTB100), you can connect a cellular phone featuring

Bluetooth wireless technology to this unit for hands-free, wireless calls, even while driving.

Important

! Since this unit is on standby to connect with your cellular phones via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage.

! Advanced operations that require your attention such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place and operate.


Bluetooth adapter

’s operation manual. This section provides brief information on the hands-free phoning operations with this unit which slightly differes or is cut short from that described in the Bluetooth adapter


Shows the battery strength of cellular phone.

! Battery strength indicator may differ from the actual battery strength.

! If the battery strength is not available, nothing is displayed in the battery strength indicator area.

5 Incoming call notice indication

Shows when an incoming call has been received and not checked yet.

! Incoming call notice is not displayed for calls made when your cellular phone is disconnected from this unit.

6 Automatic answering/Automatic rejecting indicator

Shows AUTO when the automatic answering function is on (for more details, refer to Setting the automatic answering on page 49).

Shows REFUSE when the automatic rejecting function is on (for more details, refer to Setting the automatic rejecting on page 49).

7 Clock display

Shows the time (if connected with a phone).

% Press SOURCE to select the telephone.

Note

Equalizer curve for the phone source is fixed.

When selecting the phone source, you cannot operate the equalizer function. Refer to Recalling equalizer curves on page 21.

1 Device name

Shows the device name of the cellular phone.

2 Signal level indicator

Shows the signal strength of cellular phone.

! Signal level indicator may differ from the actual signal level.

3 User number indicator

Shows the registration number of the cellular phone.

4 Battery strength indicator

Setting up for hands-free phoning

Before you can use the hands-free phoning function you will need to set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level.

1 Connection

For detailed instructions on connecting your phone to this unit via Bluetooth wireless technology, refer to Connecting a cellular phone on page 43.

En

41

Section


# Your phone should now be temporarily connected; however, to make best use of the technology, we recommend you register the phone to this unit.

2 Registration

Refer to Registering connected cellular phone on page 44 for instructions on how to register your temporarily connected phone.

3 Volume adjustment

Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is memorized in this unit as the default setting.

# Caller’s voice volume and ring volume may vary depending on the type of cellular phones.

# If the difference between the ring volume and caller

’s voice volume is big, overall volume level may become unstable.

# Before disconnecting cellular phone from this unit, make sure to adjust the volume to proper level. If the volume has been muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected from this unit.

Making a phone call

Voice recognition

1 Press BAND and hold until Voice dial appears in the display.

Voice dial appears in the display. When

Voice dial ON is displayed, voice recognition function is now ready.

# If your cellular phone does not feature voice recognition function, No voice dial appears in the display and opearation is not available.

2 Pronounce the name of your contact.

Taking a phone call

Answering an incoming call

1 When a call comes in, push

MULTI-CONTROL up.

# If the private mode is selected on the cellular phone, hands-free phoning may not be performed.

2 To end the call, push MULTI-CONTROL down.

The estimated call time appears in the display

(this may differ slightly from the actual call time).

Rejecting an incoming call

% When a call comes in, push

MULTI-CONTROL down.

The call is rejected.

Answering a call waiting

1 Push MULTI-CONTROL up to answer a call waiting.

# Pushing MULTI-CONTROL up switches between callers on hold.

2 Push MULTI-CONTROL down to end all calls.

Pushing MULTI-CONTROL down ends all calls including a call waiting on line.

# The caller you have been talking to is now on hold. To end the call, both you and your caller need to hang up the phone.

# While your callers hold the line, pushing

MULTI-CONTROL up switches between callers.

Rejecting a call waiting

% Push MULTI-CONTROL down to reject a call waiting.

42

En


Section

03





FUNCTION.


Function names for hands-free phoning appear on the display.

3 Turn MULTI-CONTROL to change functions.

Turn MULTI-CONTROL to switch between the functions.

Function names that appear in the display are different depending on your cellular phone

’s connection and registration status.

If not connected yet

Search&Connect (search and connect) —

Connection open (connection open)

—

Connect phone (connect phone)

—

Delete phone (delete phone) —PH.B.Transfer

(phone book transfer)

—Refuse calls (automatic reject setting)

—Auto answer (automatic answer setting)

—Ring tone (ring tone select)

—Auto connect (automatic connection setting)

—Echo cancel (echo cancel)—

Device info. (device information)

If connected but not registered yet

Disconnect phone (disconnect phone)

—

Set phone (registering phone)

—



—Number dial (call by entering number)



—Ring tone (ring tone select)—

Auto connect (automatic connection setting)

—Echo cancel (echo cancel)—Device info.

(device information)

If already connected and registered

Disconnect phone (disconnect phone) —



—PH.B.Name view

(phone book name view)

—Clear memory

(clear memory)

—Number dial (call by entering number)



—Ring tone (ring tone select)—

Auto connect (automatic connection setting)

—Echo cancel (echo cancel)—Device info.

(device information)



# PH.B.Name view (phone book name view) cannot be selected for cellular phone registered guest phone.

# If cellular phone is connected to this unit via

Bluetooth wireless technology with HSP (Head

Set Profile), PH.B.Name view, Clear memory,

Number dial and Refuse calls cannot be selected.



Search&Connect, Connection open,

Connect phone, PH.B.Transfer,

Disconnect phone, Number dial and

Clear memory within about 30 seconds, the display is automatically returned to the ordinary display.

Connecting a cellular phone

Searching for available cellular phones


Search&Connect in the function menu.

2 Press MULTI-CONTROL to search for available cellular phones.

While searching, Searching flashes. When available cellular phones featuring Bluetooth wireless technology are found, device names or Name not found (if names cannot be obtained) are displayed.

# If this unit fails to find any available cellular phones, Not found is displayed.

3 Push MULTI-CONTROL up or down to select a device name you want to connect.

En

43

Section


4 Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting flashes. To complete the connection, please check the device name ( Pioneer BT Unit) and enter the link code on your cellular phone. If the connection is established, Connected is displayed.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless connection on page 28.

Using a cellular phone to initiate a connection


Connection open in the function menu.

2 Press MULTI-CONTROL to open the connection.

Always waiting is displayed and the unit is now on standby for connection from cellular phone.

3 Use cellular phone to connect to this unit.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless connection on page 28.

Disconnecting a cellular phone


Disconnect phone in the function menu.

Device name of the connected phone appears in the display.

2 Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed,

Disconnected is displayed.

Registering connected cellular phone


Set phone in the function menu.

2 Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1) —P2 (user phone 2)—P3

(user phone 3)

—G1 (guest phone 1)—G2

(guest phone 2)

# As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, No data is displayed. If the assignment is already taken, the device name appears. To replace an assignment with a new phone, first delete the current assignment. For more detailed instructions, see Deleting a registered phone on this page.

3 Press MULTI-CONTROL to register the currenctly connected phone.

When the registration is completed,

Reg. Completed is displayed.

# If the registration failed, Reg. ERROR is displayed. In this case, return to step 1 and try again.

Deleting a registered phone


Delete phone in the function menu.


P1 (user phone 1) —P2 (user phone 2)—P3

(user phone 3)


(guest phone 2)

# If the assignment is empty, No data is displayed and the operation is not possible.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3 Push MULTI-CONTROL right to select

Delete YES.

Delete YES is displayed. Deleting phone is now on standby.

44

En


4 Press MULTI-CONTROL to delete the phone.

After the phone is deleted, Deleted is displayed.

Connecting to a registered cellular phone

Connecting to a registered phone manually


Connect phone in the function menu.


P1 (user phone 1)

—P2 (user phone 2)—P3

(user phone 3)


(guest phone 2)

# If the assignment is empty, No data is displayed and the operation is not possible.

3 Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting is displayed.

After the connection is completed, Connected is displayed.

Connecting to a registered phone automatically


Auto connect in the function menu.

2 Press MULTI-CONTROL to turn automatic connection on.

If your cellular phone is set ready for Bluetooth wireless connection, the connection to this unit will be automatically established.

# To turn automatic connection off, press


Using the Phone Book

Transferring entries to the Phone Book

The Phone Book can hold a total of 500 entries; 300 from User 1, 150 from User 2, and 50 from User 3.


PH.B.Transfer in the function menu.

2 Press MULTI-CONTROL to enter in the phone book transfer standby mode.

Transfer appears in the display.

3 Use cellular phone to perform phone book transfer.

Perform phone book transfer using the cellular phone. For detailed instruction on this, refer to the instruction manual that came with your cellular phone.

# The display indicates how many entries have been transferred and the total number to be transferred.

4 Data transferred is displayed and phone book transfer is completed.

Changing the Phone Book display order


PH.B.Name view in the function menu.

Invert names YES appears in the display.

2 Press MULTI-CONTROL to change the name view order.

Inverted is displayed and the name view order is changed.

Pressing MULTI-CONTROL repeatedly changes the name view order between first name and last name.

Calling a number in the Phone Book

Important

You are required to park your vehicle and set the parking brake in order to perform this operation.

After finding the number in the Phone Book you want to call, you can select the entry and make the call.

1 Press LIST to display the Phone Book.

2 Push MULTI-CONTROL left or right to select the first letter of the name you are looking for.

Section

03

En

45

Section


3 Press MULTI-CONTROL to display entries.

The display shows the first three Phone Book entries starting with that letter (e.g.

“Ben”,

“Brian” and “Burt” when “B” is selected).

4 Push MULTI-CONTROL up or down to select a Phone Book entry you want to call.

5 Push MULTI-CONTROL right to display the detailed list of the selected entry.

The phone number, name and genre (if assigned) of entries are displayed in the detailed list.

# You can scroll the name and phone number by holding DISPLAY.

# If several phone numbers are entered to an entry, select one by turning MULTI-CONTROL.

# If you want to go back and select another entry, push MULTI-CONTROL left.

6 Press MULTI-CONTROL to make a call.


Editing the name of a Phone Book entry

Important


You can edit the names of Phone Book entries.

Each name can be up to 16 characters long.

1 Display the detailed list of your desired

Phone Book entry.

See step 1 to 5 on Calling a number in the

Phone Book on the previous page for how to do this.

2 Press and hold MULTI-CONTROL to display the name input screen.

Edit name is displayed.

3 Press DISPLAY to select the desired character type.

Each press of DISPLAY switches the character types in the following order:

Alphabet (upper case), numbers and symbols

—alphabet (lower case)—numbers and symbols

—European characters, such as those with accents (e.g., á, à, ä, ç) or Russian characters

# Pressing and holding DISPLAY enables you to switch character set between ISO8859-1 (European characters) and ISO8859-5 (Russian characters) alternately.

# European characters and Russian characters can ’t be mixed.

4 Push MULTI-CONTROL up or down to select a letter.

# To delete a character and leave a space, select

“_” (underbar).

5 Push MULTI-CONTROL left or right to move the cursor to the previous or next character position.

6 Press MULTI-CONTROL to store the new name.

Editing phone numbers

Important


You can edit the numbers of Phone Book entries. Each phone number can be up to 24 digits long.


Phone Book entry.


Phone Book on the previous page for how to do this.



3 Turn MULTI-CONTROL to switch to the number input screen.

Edit name (name input screen)

—

Edit number (number input screen)

—

Clear memory (clear memory screen)

46

En


4 Push MULTI-CONTROL left or right to move the cursor to the number you want to change.

5 Push MULTI-CONTROL up or down to change numbers.

Repeat these steps until you have finished changing.

6 Press MULTI-CONTROL to store the new number.

Clearing a Phone Book entry

Important



Phone Book entry.


Phone Book on page 45 for how to do this.



3 Turn MULTI-CONTROL to switch to the clear memory screen.

Edit name (name input screen)

—

Edit number (number input screen)

—

Clear memory (clear memory screen)

4 Push MULTI-CONTROL right to show a confirmation display.

Clear memory YES is displayed.

# If you do not want to clear memory that you have selected, push MULTI-CONTROL left. The display reverts.

5 Press MULTI-CONTROL to delete the

Phone Book entry.

Cleared is displayed.

The Phone Book entry is deleted. The display returns to Phone Book entry list.

Using the Call History

Important


The 12 most recent calls made (dialled), received and missed, are stored in the Call History. You can browse the Call History and call numbers from it.

1 Press LIST to display the list.

Press LIST repeatedly to switch between the following lists:

Phone book

—Missed call—Dialled call—Received call

# About the Phone Book list, refer to Using the

Phone Book on page 45.

# If no phone numbers have been stored in the selected list, No data is displayed.

2 Turn MULTI-CONTROL to select a phone number.

Turning MULTI-CONTROL to change the phone numbers stored in the list.

# If the number is already in the Phone Book the name is displayed.

# You can also change the phone number by pushing MULTI-CONTROL up or down.

3 Push MULTI-CONTROL right to display the detailed list.

Name and phone number are displayed in the detailed list.

# If the number is already in the Phone Book then the name is also displayed.

# Turning MULTI-CONTROL switches to the previous or next phone number diplayed in the detailed list.

# If you do not operate anything within about 30 seconds, the list display is canceled automatically.

4 Press MULTI-CONTROL to make a call.

# For an international call, press and hold

MULTI-CONTROL to add + to the phone number.


Section

03

En

47

Section


Using preset numbers

Important


Numbers that you dial frequently can be assigned to presets for quick recall.

1 Select a desired phone number from the Phone Book or the Call History. Or directly enter a desired phone number.

To select a desired phone number from the

Phone Book or the Call History, see the instructions explained in previous pages. To directly enter a desired phone number, see

Making a call by entering phone number on this page.

2 Press and hold one of 1 to 6 on the remote control to store the phone number.

The selected phone number has been stored in memory. The next time you press the same preset button, the phone number is recalled from memory.

Making a call by entering phone number

Important



Number dial in the function menu.

# You can also enter in this menu from the standby display by pressing DIRECT on the remote control.

2 Push MULTI-CONTROL up or down to select a number.

# You can also input numbers by pressing 0 to 9 on the remote control.

3 Push MULTI-CONTROL left or right to move the cursor to the previous or next position.

# Up to 24 digits can be entered.

4 When you completed entering the number, press MULTI-CONTROL.

Call confirmation appears.

5 Press MULTI-CONTROL again to make a call.


Clearing memory


Clear memory in the function menu.

2 Push MULTI-CONTROL up or down to select an item.

Each time MULTI-CONTROL is pushed up or down, the items are switched in the following order:

Phone book (phone book) —Missed calls

(missed call history)

—Dialled calls (dialled call history)

—Received calls (received call history)

—Dial preset (preset phone numbers)—

All clear (delete all memory)

# If you want to clear all the Phone Book, dialled/received/missed call history list and preset phone number, select All clear.

# If guest phone is connected to this unit via

Bluetooth wireless technology, Phone book cannot be selected.

3 Push MULTI-CONTROL right to determine the item that you want to delete from this unit.

Clear memory YES is displayed. Clearing memory is now on standby.

# If you do not want to clear memory that you have selected, push MULTI-CONTROL left. The display reverts.

4 Press MULTI-CONTROL to clear the memory.

Cleared is displayed and data on the selected item is cleared from this unit

’s memory.

48

En


Setting the automatic rejecting


Refuse calls in the function menu.

2 Press MULTI-CONTROL to turn automatic call rejection on.

# To turn automatic call rejection off, press


Setting the automatic answering


Auto answer in the function menu.

2 Press MULTI-CONTROL to turn automatic answering on.

# To turn automatic answering function off, press MULTI-CONTROL again.

Switching the ring tone


Ring tone in the function menu.

2 Press MULTI-CONTROL to turn the ring tone on.

# To turn the ring tone off, press


Echo canceling and noise reduction


Echo cancel in the function menu.

2 Press MULTI-CONTROL to turn echo canceling on.

# To turn echo canceling off, press


Displaying BD (Bluetooth

Device) address




2 Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

Displaying system version for repair




2 Push MULTI-CONTROL down to switch to the system version of this unit.

The system (microprocessor) version of this unit is displayed.

# Pushing MULTI-CONTROL left displays the version of the Bluetooth module of this unit.

Pushing MULTI-CONTROL right returns to the system version of this unit.

Section

03

En

49

Section


Multi-CD Player

Basic Operations

You can use this unit to control a multi-CD player, which is sold separately.

! Only those functions described in this manual are supported by 50-disc multi-CD players.

! This unit is not designed to operate disc title list functions with a 50-disc multi-CD player.

About the disc title list functions, please refer to Selecting discs from the disc title list on page 53.

1 Disc number indicator



1 Press SOURCE to select the multi-CD player.

2 Push MULTI-CONTROL up or down to select a disc you want to listen to.

# You can also select a disc by using 1 to 6 buttons on the remote control.

! For discs 1 to 6, press the corresponding button number.

! For discs 7 to 12, press and hold the corresponding numbers, such as 1 for disc 7, until the disc number appears in the display.



Notes

! When the multi-CD player performs the preparatory operations, Ready is displayed.

! If an error message such as ERROR-11 is displayed, refer to the multi-CD player owner

’s manual.

! If there are no discs in the multi-CD player magazine, No Disc is displayed.

Selecting a track directly

The operation is basically the same as that of the built-in CD player.

For details concerning operation, refer to Selecting a track directly on page 14.


You can use Compression (compression and

DBE) only with a multi-CD player that supports them.




FUNCTION.






—Random mode

(random play)

—Scan mode (scan play)—

Pause (pause) —Compression (compression and DBE) —ITS play mode (ITS play)—

ITS memo (ITS programming)

—

TitleInput "A" (disc title input)




50

En



ITS memo and TitleInput "A" within about 30 seconds, the display is automatically returned to the ordinary display.


Play mode, Random mode, Scan mode,

Pause, Compression and TitleInput "A" operations are basically the same as that of the built-in CD player.


Play mode


But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the multi-CD player are as below:

! M-CD repeat – Repeat all discs in the multi-CD player


! Disc repeat – Repeat the current disc

Random mode

Scan mode



Pause

Compression

ITS play mode

ITS memo

TitleInput "A"


Refer to Using compression and

BMX on page 16.

Multi-CD player has DBE (dynamic bass emphasis) function instead of BMX.

The settings can be switched as below:

COMP OFF —COMP 1—COMP 2

—COMP OFF—DBE 1—DBE 2

Refer to Using ITS playlists on this page.

Refer to Using ITS playlists on this page.

Refer to Entering disc titles on page 16.

Notes

! If you select other discs during repeat play, the repeat play range changes to

M-CD repeat.

! If you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Disc repeat.

! After track or disc scanning is finished, normal playback of the tracks will begin again.

! When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TitleInput "A". The disc title has already been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to

99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Push MULTI-CONTROL up or down to select the CD.


ITS memo in the function menu.

3 Select the desired track by pushing


4 Push MULTI-CONTROL up to store the currently playing track in the playlist.

Memory complete is displayed and the currently playing selection is added to your playlist.

Section

03

En

51

Section



Note

After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.

1 Select the repeat range.



ITS play mode in the function menu.

3 Press MULTI-CONTROL to turn ITS play on.

ITS play mode appears in the display. Playback begins of those tracks from your playlist within the previously selected M-CD repeat or

Disc repeat ranges.

# If no tracks in the current range are programmed for ITS play, then ITS empty is displayed.

# To turn ITS play off, press MULTI-CONTROL again.

Erasing a track from your ITS playlist

You can delete a track from your ITS playlist if

ITS play is on.

If ITS play is already on, skip to step 2. If ITS play is not already on, use MULTI-CONTROL.

1 Play the CD with the track you want to delete from your ITS playlist, and turn ITS play on.

Refer to Playback from your ITS playlist on this page.



3 Select the desired track by pushing


4 Push MULTI-CONTROL down to erase the track from your ITS playlist.

The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.

# If there are no tracks from your playlist in the current range, ITS empty is displayed and normal play resumes.


Erasing a CD from your ITS playlist

You can delete all tracks of a CD from your ITS playlist if ITS play is off.

1 Play the CD that you want to delete.

Push MULTI-CONTROL up or down to select the CD.



3 Push MULTI-CONTROL down to erase all tracks on the currently playing CD from your ITS playlist.

All tracks on the currently playing CD are erased from your playlist and

Memory deleted is displayed.


Using disc title functions

You can input CD titles and display the titles.

Then you can easily search for and play a desired disc.

52

En


Entering disc titles

Use the disc title input feature to store up to

100 CD titles (with ITS playlist) into the multi-

CD player. Each title can be up to 10 characters long.

For details concerning operation, refer to Entering disc titles on page 16.

! Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted.

! After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.

Displaying disc titles

You can display the text information of any disc that has had a disc title entered.



Selecting discs from the disc title list

Disc title list lets you see the list of disc titles that have been entered into the multi-CD player and select one of them to play back.

1 Press LIST to switch to the disc title list mode during the playback display.

2 Use MULTI-CONTROL to select the desired disc title.

Turn to change the disc title; press to play.

# You can also change the disc title by pushing


# When playing CD TEXT disc, push

MULTI-CONTROL right to see a list of the tracks in the selected disc. Push MULTI-CONTROL left to return to the disc list.

# If no title has been entered for a disc,

No D.Title will be displayed.

# No Disc is displayed next to the disc number when there is no disc in the magazine.

Using CD TEXT functions

You can use these functions only with a CD

TEXT compatible multi-CD player.



Section

03

En

53

Section


DVD Player

Basic Operations

You can use this unit to control a DVD player or multi-DVD player, which is sold separately.


DVD player

’s or multi-DVD player’s operation manual. This section provides information on

DVD operations with this unit which differs from that described in the DVD player

’s or multi-DVD player


3 4

Selecting a disc

! You can operate this function only when a multi-DVD player is connected to this unit.

% Press any of 1 to 6 on the remote control to select the desired disc.

Selecting a folder

! You can operate this function only when a

DVD player which is corresponding to compressed audio playback is connected to this unit.

% Push MULTI-CONTROL up or down to select a folder.

1 DVD-V/VCD/CD/MP3/WMA indicator

Shows the type of disc currently playing.

2 Disc number indicator

Shows the disc number currently playing when using a multi-DVD player.

3 Title/Folder number indicator

Shows the title (when playing DVD video) or folder (when playing compressed audio) of the selection currently playing.

4 Chapter/track number indicator

Shows the chapter (when playing DVD video) or track (when playing video CD, CD or compressed audio) currently playing.


1 Press SOURCE to select the DVD player/ multi-DVD player.


3 To skip back or forward to another chapter/track, push MULTI-CONTROL left or right.





FUNCTION.





During DVD video or Video CD playback


—Pause (pause)

During CD playback

Play mode (repeat play) —Random mode


Pause (pause)

—ITS play mode (ITS play)—

ITS memo (ITS input) —TitleInput "A" (disc title input)

During compressed audio playback

Play mode (repeat play) —Random mode


Pause (pause)

54

En






Play mode, Random mode, Scan mode,

Pause and TitleInput "A" operations are basically the same as that of the built-in CD player.

Also, ITS play mode and ITS memo operations are basically the same as that the multi-

CD player.


Play mode

Random mode


But the repeat play range that you can select is vary depending on the type of disc or system. The repeat play ranges of the DVD player/multi-DVD player are as below:

During PBC playback of Video

CDs, this function cannot be operated.

! Disc repeat – Repeat the current disc


! Title repeat – Repeat just the current title

! Chapter repeat – Repeat just the current chapter



Scan mode

Pause

ITS play mode

ITS memo

TitleInput "A"



Refer to Using ITS playlists on page 51.

Refer to Using ITS playlists on page 51.

Refer to Entering disc titles on page 16.

Notes

! If you select other discs during repeat play, the repeat play range changes to Disc repeat.

! During video CD or CD playback, if you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Disc repeat.

! During compressed audio playback, if you select another folder during repeat play, the repeat play range changes to Disc repeat.

! During compressed audio playback, if you perform track search or fast forward/reverse during Track repeat, the repeat play range changes to Folder repeat.

! When using this unit with multi-DVD player, you can switch to ITS play mode, ITS memo and disc title input.

! The ITS function of a DVD player differs slightly from ITS playback with a multi-CD player. With multi-DVD player, ITS playback applies only to the CD playing. For details, refer to Using ITS playlists on page 51.

Section

03

En

55

Section


TV tuner

Basic Operations

You can use this unit to control a TV tuner, which is sold separately.


TV tuner

’s operation manual. This section provides information on TV operations with this unit which differs from that described in the

TV tuner


1 Band indicator

2 Preset number indicator

3 Channel indicator

1 Press SOURCE to select the TV.

2 Press BAND to select a band.

Press BAND until the desired band is displayed, TV-1 or TV-2.

3 To perform manual tuning, push


4 To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one second and release.

The tuner will scan the channels until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing


# If you push and hold MULTI-CONTROL left or right, you can skip broadcasting channels. Seek tuning starts as soon as you release

MULTI-CONTROL.


You can easily store up to 12 broadcast stations for later recall.

! Up to 24 stations, 12 for each of two TV bands, can be stored in memory.

1 When you find a station that you want to store in memory press LIST.

2 Use MULTI-CONTROL to store the selected station in memory.


The preset number you have selected will flash and then remain lit. The selected station has been stored in memory.







You can also store and recall stations assigned to preset tuning numbers P.CH1 to P.CH6 by using the remote control.

% When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit.

The selected station has been stored in memory.


# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

56

En


Storing the strongest broadcast stations sequentially



2 Use MULTI-CONTROL and select

FUNCTION to display BSSM.




3 Press MULTI-CONTROL to turn BSSM on.

Searching is displayed. While Searching is displayed, the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, the preset channel list appears.

# To cancel the storage process, press






# To return to the channel display, press BAND.


Note

Storing broadcast stations with BSSM may replace broadcast stations you have saved using

P.CH1 to P.CH12.

Section

03

En

57

Appendix


Troubleshooting

Symptom iPod doesn ’t operate correctly.

Cause

Cables are incorrectly connected.

Action

Disconnect the cable from iPod.

Once iPod main menu is displayed, connect the cable again.

Reset the iPod.

Understanding error messages

When you contact your dealer or your nearest

Pioneer Service Center, be sure to record the error message.

Built-in CD Player

Message

ERROR-11, 12,

17, 30

ERROR-11, 12,

17, 30

ERROR-10, 11,

12, 15, 17, 30,

A0

ERROR-15

Cause

Dirty disc

Scratched disc

Action

Clean disc.

Replace disc.

Electrical or mechanical

Switch the ignition key, or switch to a different source, then back to the

CD player.

The inserted disc does not contain any data

Replace disc.

ERROR-22, 23 The CD format cannot be played back

No audio

Replace disc.

Replace disc.

The inserted disc does not contain any files that can be played back

PROTECT All the files on the inserted disc are secured by

DRM

TRK SKIPPED The inserted disc contains WMA files that are protected by DRM

Replace disc.

Replace disc.

iPod

Message

ERROR-11

ERROR-21

ERROR-30

ERROR-A0

No Songs

STOP

Cause

Communication failure

Old version of iPod iPod failure iPod is not charged but operates correctly

No songs

No songs in the current list

Action

Disconnect the cable from iPod.

Once iPod main menu is displayed, connect the cable again.

Reset the iPod.

Update the iPod version.

Reset the iPod.

Check if the connection cable for iPod shorted out

(e.g., not caught in metal objects).

After checking, switch the ignition key or disconnect the iPod and connect again.

Transfer the songs to iPod.

Select a list that contains the songs.

Handling guideline of discs and player

! Use only discs featuring either of following two logos.

! Use only conventional, fully circular discs.

Do not use shaped discs.

! Use 12-cm or 8-cm CD. Do not use an adapter when playing 8-cm CDs.

58

En

Appendix


! Do not insert anything other than a CD into the CD loading slot.

! Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player.

! Unfinalized CD-R/CD-RW disc playback is not possible.

! Do not touch the recorded surface of the discs.

! Store discs in their cases when not in use.

! Avoid leaving discs in excessively hot environments including under direct sunlight.

! Do not attach labels, write on or apply chemicals to the surface of the discs.

! To clean a CD, wipe the disc with a soft cloth outward from the center.

! Condensation may temporarily impair the player

’s performance. Leave it to adjust to the warmer temperature for about one hour. Also, wipe any dump discs with a soft cloth.

! Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions and so on.

! Text information may not be correctly displayed depending on the recorded environment.

! Road shocks may interrupt disc playback.

! Read the precautions with discs before using them.

Dual Discs

! Dual Discs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other.

! Since the CD side of Dual Discs is not physically compatible with the general CD standard, it may not be possible to play the

CD side with this unit.

! Frequent loading and ejecting of a Dual

Disc may result in scratches on the disc.

Serious scratches can lead to playback problems on this unit. In some cases, a Dual

Disc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using Dual

Disc with this unit.

! Please refer to the information from the disc manufacturer for more detailed information about Dual Discs.

Compressed audio files

! Depending on the version of Windows

Media Player used to encode WMA files, album names and other text information may not be correctly displayed.

! Depending on the software (or the version of the software) used to encode the audio files, this unit may not operate properly.

! There may be a slight delay when starting playback of WMA/AAC files encoded with image data.

! ISO 9660 Level 1 and 2 compliant. Romeo and Joliet file systems are both compatible with this player.

! Multi-session playback is possible.

! Compressed audio files are not compatible with packet write data transfer.

! Only 64 characters from the beginning can be displayed as a file name (including the extension such as .wma, .mp3, .m4a or

.wav) or a folder name.

! Folder selection sequence or other operation may be altered depending on the encoding or writing software.

! Regardless of the length of blank section between the songs of original recording, compressed audio discs will play with a short pause between songs.

! File extensions such as .wma, .mp3, .m4a

or .wav must be used properly.

En

59

Appendix


Example of a hierarchy

: Folder

: Compressed audio file

1

2

5

6

3

4

AAC

! Compatible format: AAC encoded by iTunes ® version 6.0.5 and earlier

! Sampling frequency: 11.025 kHz to 48 kHz

! Transmission rate: 16 kbps to 320 kbps

! Apple Lossless: No

WAV

! Compatible format: Linear PCM (LPCM),

MS ADPCM

! Quantization bits: 8 and 16 (LPCM), 4 (MS

ADPCM)

! Sampling frequency: 16 kHz to 48 kHz

(LPCM), 22.05 kHz to 44.1 kHz (MS AD-

PCM)

Level 1 Level 2 Level 3 Level 4

! This unit assigns folder numbers. The user cannot assign folder numbers.

! Folder hierarchy is allowed up to eight tiers.

However, practical hierarchy of folder is less than two tiers.

! Up to 99 folders on a disc can be played back.

Compressed audio compatibility

WMA

! Compatible format: WMA encoded by

Windows Media Player Ver. 7, 7.1, 8, 9 or 10

! Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR)

! Sampling frequency: 32 kHz to 48 kHz

! Windows Media Audio 9 Professional, Lossless, Voice: No

MP3

! Bit rate: 8 kbps to 320 kbps

! Sampling frequency: 16 kHz to 48 kHz (32,

44.1, 48 kHz for emphasis)

! Compatible ID3 tag version: 1.0, 1.1, 2.2,

2.3, 2.4 (ID3 tag Version 2.x is given priority than Version 1.x.)

! M3u playlist: No

! MP3i (MP3 interactive), mp3 PRO: No

About handling the iPod

CAUTION

! Pioneer accepts no responsibility for data lost on the iPod even if that data is lost while using this unit.

! Do not leave the iPod in direct sunlight for extended amounts of time. Extended exposure to direct sunlight can result in iPod malfunction due to the resulting high temperature.

! Do not leave the iPod in any location with a high temperature.

! Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.

For details, refer to the iPod

’s manuals.

About iPod settings

! You cannot operate the iPod Equalizer on the Pioneer products. We recommend that you set the iPod Equalizer to off, before connecting the iPod to this unit.

! You cannot set Repeat to off on the iPod when using this unit. Even if you set Repeat to off on the iPod, Repeat is changed to All automatically when connecting the iPod to this unit.

60

En

Appendix


Specifications

General

Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable)

Grounding system ................... Negative type

Max. current consumption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

Chassis ..................... 178 × 50 × 162 mm

(7 × 2 × 6-3/8 in.)

Nose ........................... 188 × 58 × 15 mm

(7-3/8 × 2-1/4 × 5/8 in.)

D

Chassis ..................... 178 × 50 × 162 mm

(7 × 2 × 6-3/8 in.)

Nose ........................... 170 × 46 × 15 mm

(6-3/4 × 1-3/4 × 5/8 in.)

Weight .......................................... 1.5 kg (3.3 lbs)

Audio

Maximum power output ....... 50 W × 4

50 W × 2/4 W + 70 W × 1/2

W (for subwoofer)

Continuous power output ... 22 W × 4 (50 Hz to 15 000

Hz, 5% THD, 4 W load, both channels driven)

Load impedance ...................... 4 W to 8 W × 4

4

W to 8 W × 2 + 2 W × 1

Preout max output level/output impedance

..................................................... 4 V/100

W

Equalizer (7-Band Graphic Equalizer):

Frequency .......................... 50/125/315/800/2k/5k/12.5k

Hz

Gain ...................................... ±12 dB

Loudness contour:

Low ....................................... +3.5 dB (100 Hz), +3 dB (10 kHz)

Mid ....................................... +10 dB (100 Hz), +6.5 dB

HPF:

(10 kHz)

High ..................................... +11 dB (100 Hz), +11 dB

(10 kHz)

(volume: –30 dB)

Frequency .......................... 50/63/80/100/125 Hz

Slope ....................................

–12 dB/oct

Subwoofer (mono):

Frequency .......................... 50/63/80/100/125 Hz

Slope ....................................

–18 dB/oct

Gain ...................................... +6 dB to –24 dB

Phase .................................. Normal/Reverse

Bass boost:

Gain ...................................... +12 dB to 0 dB

CD player

System .......................................... Compact disc audio system

Usable discs .............................. Compact disc

Signal format:

Sampling frequency ..... 44.1 kHz

Number of quantization bits

........................................... 16; linear

Frequency characteristics ... 5 Hz to 20 000 Hz (±1 dB)

Signal-to-noise ratio ............... 94 dB (1 kHz) (IHF-A network)

Dynamic range ......................... 92 dB (1 kHz)

Number of channels .............. 2 (stereo)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10 (2ch audio)

(Windows Media Player)

AAC decoding format ............ MPEG-4 AAC (iTunes

® encoded only)

WAV signal format .................. Linear PCM & MS ADPCM

FM tuner

Frequency range ...................... 87.9 MHz to 107.9 MHz

Usable sensitivity ..................... 8 dBf (0.7 µV/75

W, mono,

S/N: 30 dB)

Signal-to-noise ratio ............... 75 dB (IHF-A network)

Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz, stereo)

0.1 % (at 65 dBf, 1 kHz, mono)

Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)

Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)

AM tuner

Frequency range ...................... 530 kHz to 1 710 kHz (10 kHz)

Usable sensitivity ..................... 18 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IHF-A network)

Note

Specifications and the design are subject to possible modifications without notice due to improvements.

En

61

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU

TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: 1-877-283-5901

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

先鋒股份有限公司

總公司 : 台北市中山北路二段44號13樓

電話 : (02) 2521-3588

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心

9樓901-6室

電話 : (0852) 2848-6488

<KMMZX> <06K00000>

Published by Pioneer Corporation.

Copyright © 2006 by Pioneer Corporation.

All rights reserved.

Publié par Pioneer Corporation. Copyright

© 2006 par Pioneer Corporation. Tous droits réservés.

Printed in Thailand

Imprimé en Thaïlande

<XRD7142-B/N> UC

DEH-P5900IB

This product conforms to CEMA cord colors.

Le code de couleur des câbles utilisé pour ce produit est conforme à CEMA.

Printed in Thailand

Imprimé en Thaïlande

<XRD7143-A/N> UC <KMMZX> <06J00000>

Connecting the Units ENGLISH

Note:

• When this unit is installed in a vehicle without

ACC (accessory) position on the ignition switch, red cable must be wired to the terminal that can detect the operation of the ignition key.

Otherwise, battery drain may result.

O

F

F

ACC ON

T

R

A

S

O

F

F

ON

T

R

A

S

ACC position No ACC position

• Use this unit in other than the following conditions could result in fire or malfunction.

— Vehicles with a 12-volt battery and negative grounding.

— Speakers with 50 W (output value) and 4 ohm to 8 ohm (impedance value).

• To prevent short-circuit, overheating or malfunction, be sure to follow the directions below.

— Disconnect the negative terminal of the battery before installation.

— Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.

— Place all cables away from moving parts, such as gear shift and seat rails.

— Place all cables away from hot places, such as near the heater outlet.

— Do not pass the yellow cable through a hole into the engine compartment to connect to a battery.

— Cover any disconnected cable connectors with insulating tape.

— Do not shorten any cables.

— Never cut the insulation of the power cable of this unit in order to share the power to other equipment. Current capacity of the cable is limited.

— Use a fuse of the rating prescribed.

— Never wire the speaker negative cable directly to ground.

— Never band together multiple speaker’s negative cables.

• Control signal is output through blue/white cable when this unit is powered on. Connect it to an external power amp’s system remote control or the vehicle’s auto-antenna relay control terminal

(max. 300 mA, 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal.

• Never connect blue/white cable to external power amp’s power terminal. Also, never connect it to the power terminal of the auto antenna.

Otherwise, battery drain or malfunction may result.

• IP-BUS connectors are color-coded. Be sure to connect connectors of the same color.

• Black cable is ground. This cable and other product’s ground cable (especially, high-current products such as power amp) must be wired separately. Otherwise, fire or malfunction may result if they are accidentally detached.

• Cord function may differ according to the product, even if cord color is the same. When connecting this system, be sure to check all manuals and connect cords correctly.

Installation

Note:

• Check all connections and systems before final installation.

• Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions.

• Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle.

• Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result of a sudden stop.

• The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.

• Optimum performance is obtained when the unit is installed at an angle of less than 60°.

60

°

1. Insert the mounting sleeve into the dashboard.

• When installing in a shallow space, use a supplied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve.

2. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.

3. Install the unit as illustrated.

Removing the Unit

1. Extend top and bottom of the trim ring outwards to remove the trim ring. When reattaching the trim ring, push the trim ring onto the unit until it clicks. (If the trim ring is attached upside down, the trim ring will not fit properly.)

• It becomes easy to remove the trim ring if the front panel is released.

Trim ring

DIN Front/Rear-mount

This unit can be properly installed either from

“Front” (conventional DIN Front-mount) or

“Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis).

For details, refer to the following installation methods.

DIN Front-mount

Installation with the rubber bush

Mounting sleeve

Dashboard

2. Insert the supplied extraction keys into both sides of the unit until they click into place.

3. Pull the unit out of the dashboard.

Rubber bush

Screw

ENGLISH

DIN Rear-mount

1. Extend top and bottom of the trim ring outwards to remove the trim ring. When reattaching the trim ring, push the trim ring onto the unit until it clicks. (If the trim ring is attached upside down, the trim ring will not fit properly.)

• It becomes easy to remove the trim ring if the front panel is released.

Trim ring

Fastening the front panel

If you do not plan to detach the front panel, the front panel can be fastened with supplied screws and holders.

1. Attach the holders to both sides of the front panel.

Holder

2. Determine the appropriate position where the holes on the bracket and the side of the unit match.

2. Replace the front panel to the unit.

3. Flip the holders into upright positions.

3. Tighten two screws on each side.

• Use either truss screws (5 mm

× 8 mm) or flush surface screws (5 mm

× 9 mm), depending on the shape of screw holes in the bracket.

Screw

4. Fix the front panel to the unit using screws.

Screw

Factory radio mounting bracket

Dashboard or Console

Connecting the Units

7

Subwoofer

iPod with Dock

Connector

When not connecting a rear speaker lead to a

Dock connector port

2 m (6 ft. 7 in.)

Interface cable (e.g., CD-I200)

(sold separately)

Gray

Dock connector

Rear output

Front output

This product

Antenna jack

Subwoofer output

Fuse (10 A)

15 cm (5-

7/8 in.)

AUX jack (3.5 ø)

Use a stereo mini plug cable to connect with auxiliary equipment.

(Blue)

Wired remote input

Hard-wired remote control adaptor can be connected (sold separately).

IP-BUS cable

Multi-CD player

(sold separately)

Connect with RCA cables

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio

Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

Yellow

Connect to the constant 12 V supply terminal.

Red

Connect to terminal controlled by ignition switch (12 V DC).

Orange/white

Connect to lighting switch terminal.

Black (chassis ground)

Connect to a clean, paint-free metal location.

With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.

Perform these connections when using the optional amplifier.

Blue/white

Connect to system control terminal of the power amp or auto-antenna relay control terminal (max.

300 mA 12 V DC).

Front speaker

+

≠

Left

Front speaker

Rear speaker

+

≠

+

≠

White Gray

White/black

Green

Gray/black

Violet

Green/black Violet/black

System remote control

+

≠

+

≠

Front speaker

+

≠

Front speaker

Right

Rear speaker

Rear speaker

Subwoofer

+

≠

+

≠

+

≠

+

≠

Rear speaker

Subwoofer

7

optional amplifier

iPod with Dock

Connector

Dock connector

When using a Subwoofer without using the

Dock connector port

2 m (6 ft. 7 in.)

Interface cable (e.g., CD-I200)

(sold separately)

Gray

This product

Subwoofer output

Front output

Antenna jack

Subwoofer output

Fuse (10 A)

15 cm (5-

7/8 in.)

AUX jack (3.5 ø)

Use a stereo mini plug cable to connect with auxiliary equipment.

IP-BUS input

(Blue)

Wired remote input

Hard-wired remote control adaptor can be connected (sold separately).

IP-BUS cable

Multi-CD player

(sold separately)

Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio

Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

Yellow

Connect to the constant 12 V supply terminal.

Red

Connect to terminal controlled by ignition switch (12 V DC).

Orange/white

Connect to lighting switch terminal.

Black (chassis ground)

Connect to a clean, paint-free metal location.

Note:

Change the initial setting of this unit (refer to the Operation

Manual). The subwoofer output of this unit is monaural.

Blue/white

Connect to system control terminal of the power amp or auto-antenna relay control terminal (max.

300 mA 12 V DC).

White Gray

Front speaker

Left

Subwoofer (4

Ω)

+

≠

+

≠

White/black

Green

Gray/black

Violet

+

≠

Front speaker

Right

+

≠

Subwoofer (4

Ω)

Green/black Violet/black

When using a subwoofer of 70 W (2

Ω), be sure to connect with Violet and Violet/black leads of this unit.

Do not connect anything with Green and Green/black leads.

Green Violet

+

Not used.

Green/black Violet/black ≠

Subwoofer

(4

Ω) × 2

ENGLISH

No results