CEM Systems - Tyco Security Products India

CEM Systems - Tyco Security Products India
PRODUCT
CATALOG
EMEA & APAC
Innovative Access Solutions
2015 2016
•
CEM Catalogue
Contents
About CEM Systems...............................................................................................2
CEM Customers…...................................................................................................3
CEM Solutions.........................................................................................................5
Security Management Systems.............................................................................6
AC2000.................................................................................................................6
AC2000 Lite...........................................................................................................8
AC2000 Airport....................................................................................................10
AC2000 System Comparison................................................................................12
AC2000 Software...................................................................................................13
Integrated Alarm Monitoring.................................................................................15
Reporting.............................................................................................................16
AC2000 WEB Applications...................................................................................17
AC2000 Integrations............................................................................................21
CEM Hardware.......................................................................................................29
Controllers...........................................................................................................29
CEM DESFire Solution..........................................................................................32
CEM Readers.......................................................................................................34
Power over Ethernet Plus (PoE+) Access Control..............................................41
CEM Lift Control....................................................................................................43
Auxiliary..................................................................................................................44
www.cemsys.com
1
About CEM Systems
CEM Customers…
“CEM Systems
is a leading
provider of
access control
and fully
integrated
security
management
systems.”
CEM Systems is a leading provider of access control and fully integrated security
management systems. Originating from a computer background and with over 25
years experience in the IT & security industry, CEM is unique in that it has developed
a strong understanding of the IT issues and strategies that companies have in place.
High quality, innovative security solutions are built with this understanding in mind.
As one of the few manufacturers that design and produce all their own hardware
and system software, CEM can fully customise solutions depending on customer
requirements. With a reputation for designing and developing industry firsts, CEM
continuously develops hardware to incorporate the very latest in technology.
CEM Approved Resellers
A dedicated network of ‘Approved Resellers’ sell, install and service
CEM solutions around the world. Approved Resellers are the best of
breed in their respective geographic markets and have invested in
CEM training to become approved with a certified competency in
the CEM product range.
CEM currently secures sites in over 40 countries around the world. CEM supports
customers in a wide range of sectors including Aviation, Healthcare, Education,
Petrochemical and Retail.
Petrochemical
CEM’s AC2000 System is perfect for petrochemical sites where security
is paramount. The CEM AC2000 access control system offers refineries
24 hour security through the use of intelligent card readers and a
stable security infrastructure. AC2000 restricts entry to refineries as
well as monitoring the movement of authorised visitors, employees and
contractors. AC2000 also offers portable access control in unpredictable
petrochemical environments where a mains power supply is not always
available.
ƒƒLindsey Oil Refinery, UK
ƒƒGasco Ruwais, UAE
ƒƒJurong Island, Singapore
Aviation
CEM offers the industry’s only airport specific access control systemAC2000 Airport. AC2000 Airport secures airports around the world
including 80% of UK airports. AC2000 Airport features airport specific
applications such as Passenger Segregation, Airbridge Monitoring, Checkin Desk Enabling and Airport Link.
ƒƒIndira Gandhi Airport T3, India
ƒƒBudapest Airport, Hungary
ƒƒKeflavik International Airport, Iceland
ƒƒChangsha Huanghua Airport, Beijing
ƒƒHong Kong International Airport, China
ƒƒDubai International Airport, Terminal 3, Concourse 3, Dubai
ƒƒAuckland Airport, New Zealand
Healthcare
CEM’s PoE+ (Power over Ethernet Plus) access control solution offers its
healthcare clients an easy to install solution which minimises disruption to
the facility and reduces commissioning costs. CEM’s biometric options,
such as the S610f, can also be used to secure critical areas such a
pharmacy or intensive care unit.
ƒƒStobhill & Victoria Hospitals, UK
ƒƒMidlothian Hospital, UK
ƒƒKing Khalid University Hospital, Saudi Arabia
ƒƒBaylor Medical Centre at Uptown, USA
2
3
CEM Customers
CEM Solutions…
Education
CEM has a solution for all sizes. The proven CEM AC2000 product range offers
reliable security management for small through to large, multi-site applications.
CEM solutions are installed in educational facilities around the world,
securing students, teachers, equipment and premises. The AC2000
system controls and monitors various buildings so that only those with
correct authorisation are permitted access to education buildings, rooms
and other restricted areas across campuses.
Where does AC2000 fit in the Security Market?
ƒƒLiverpool John Moores University, UK
ƒƒLatymer School, UK
ƒƒPrimary schools around the world
Financial
With high security a requirement for major financial institutions, many have
chosen a CEM solution to protect staff and customers and secure areas
where security is of the utmost importance.
ƒƒAbu Dhabi Investment Council
ƒƒMinistry of Finance, Nigeria
ƒƒCentral Bank of Nigeria
Other Sectors
CEM solutions are suitable for other facilities including ports, retail sites,
casinos and corporate premises.
ƒƒMarina Bay Sands Casino, Singapore
ƒƒShaw Studio’s Movie City, Hong Kong
ƒƒPort of Cork, Ireland
ƒƒFarmers Trading Company, New Zealand
ƒƒCadbury (Kraft Foods), India
About AC2000
For CEM Customer Project Profiles, please visit
www.cemsys.com/casestudies
4
At the heart of the AC2000 system is the Central Database Computer (CDC Server),
which is based on a client-server system architecture design. The AC2000 CDC
running on a Linux operating system, provides a highly sophisticated level of power
and system resilience. AC2000 not only utilizes CEM’s advanced range of hardware
products including intelligent card readers and Ethernet-ready controllers, but also
offers compatibility with read heads from third party manufacturers. The use of
distributed intelligence at all levels of the system including the use of card readers with
their own database adds to the overall resilience.
5
Security Management Systems
Security Management Systems
AC2000
AC2000 System Topology
Powerful and fully integrated security management system
AC2000 is a powerful access control and security management
system (SMS). Continuously developed to meet the most
complex of security needs, AC2000 provides a highly stable,
proven solution for installations where security is of paramount
importance.
Successfully installed at some of the largest facilities around
the world, AC2000 offers a powerful suite of client and
browser based applications including central alarm monitoring,
sophisticated ID badging, visitor management, web reports,
integration with third party systems and much more.
The AC2000 Server, running on the Linux operating system,
provides a highly sophisticated level of power and system
resilience, whilst Windows® based operator workstations
present the user with a familiar, easy to use front-end interface.
Product Codes
AC2000 supports CEM’s range of industry leading Serial and
Ethernet hardware products.
6
ƒƒTime & Attendance
ƒƒUnlimited User definable Fields
ƒƒConfigure reader messages
ƒƒMuster Zones
ƒƒThreat Levels
ƒƒStandard System Link
ƒƒRange of American Dynamics
Interfaces
CDC Server 64 (Incl. Dell Tower Server Hardware and all software licences). Supports up to 64 doors
SYS/105/064
CDC Server 64 (Incl. Dell Rackmount Server & RAID 5 Hardware and all software licences). Supports up to 64 doors
SYS/103/128
CDC Server 128 (Incl. Dell Tower Server Hardware and all software licences). Supports up to 128 doors
SYS/105/128
CDC Server 128 (Incl. Dell Rackmount Server & RAID 5 Hardware and all software licences). Supports up to 128 doors
SYS/105/256
CDC Server 256 (Incl. Dell Rackmount Server Hardware, RAID 5 & all software licences). Supports up to 256 doors
SYS/004/008
AC2000 Workstation Incl. Latest spec PC with AC2000 workstation licence (SWA2WS) installed
AC2000 Language Support
CEM AC2000 is available in several language options including Spanish, Arabic, Russian, Polish, German and Simplified
Chinese. Please contact CEM Systems for more information and how to order.
AC2000 Applications at a Glance
ƒƒVIPPS ID Badging
ƒƒVehicle Management
ƒƒVisitor Management
ƒƒAlarm Event Display (AED)
ƒƒGuard Tours
ƒƒRolling Transaction Display
ƒƒZone Monitor
ƒƒOccupancy Zones
ƒƒExtended Reports
SYS/103/064
ƒƒWEB Applications
ƒƒDSC Intruder Interface
ƒƒThird party API (Application
Programming Interface)
ƒƒFully Integrated Biometrics
ƒƒLift Control
ƒƒMicrosoft Active Directory Integration
And more!
ƒƒRange of 3rd party video integrations
7
Security Management Systems
Security Management Systems
AC2000 Lite System Topology
AC2000 Lite
Integrated security management system for small to medium sites
AC2000 Lite is a feature rich, yet cost effective access
control system. Encompassing the core software features
of the AC2000 system and supporting CEM’s range of
leading hardware products, AC2000 Lite is one of the most
accomplished security management solutions available for the
small to mid range markets.
The AC2000 Lite system supports up to 128 doors. Featuring
many of the core AC2000 software modules as standard,
AC2000 Lite is ideal for small to medium sized projects that still
require a sophisticated level of security; and all within budget.
Acting as the Security Management System (SMS), AC2000
Lite is fully integrated with selected external video and intruder
detection systems. This offers one powerful central command
and control centre for all access control, video and intruder
alarms and events.
Should customer needs grow, AC2000 Lite can be seamlessly
upgraded to the core AC2000 security management system,
providing an upgrade path with virtually unlimited expansion
capabilities.
AC2000 Lite is also available as a software only solution. The
AC2000 Lite software only virtual kit option makes it possible
to replace the traditional AC2000 Lite server hardware with a
Virtual Machine (VM). This solution means that AC2000 Lite
server can be installed on the same PC as the AC2000 Lite
workstation and software. Eradicating the need for server
hardware, this virtualised AC2000 Lite software option is
extremely easy to install as it comes pre-installed and preconfigured, without the requirement for extra configuration or
specialist knowledge.
Product Codes
SYS/650/064
AC2000 Lite System Server – Dell Server (64 Door Licence)
SYS/650/128
AC2000 Lite System Server – Dell Server (128 Door Licence)
SYS/500/001
AC2000 Lite System Server Upgrade 64 to 128 Door (Licence)
SYS/500/000
AC2000 Lite Workstation Software Licence (Software Only)
SYS/500/500
AC2000 Lite Bundled Workstation (Hardware & Software)
AC2000 Lite Language Support
CEM AC2000 Lite is available in several language options including Spanish, Arabic, Russian, Polish, German and
Simplified Chinese. Please contact CEM Systems for more information and how to order.
AC2000 Lite Applications at a Glance
ƒƒVIPPS ID Badging
ƒƒVisitors Management
ƒƒVehicle Management
ƒƒZone Monitor
ƒƒAlarm Event Display (AED)
8
ƒƒRolling Transaction Display
ƒƒTime & Attendance
ƒƒAdvanced Reporting
ƒƒStandard System Link
ƒƒIntegrated Biometrics
ƒƒUser Definable Fields
ƒƒVideo and Intruder Integrations
ƒƒWEB Applications
And more!
9
Security Management Systems
Security Management Systems
Passenger Segregation
AC2000 Airport
AC2000 Airport allows the airport or airline to segregate arriving
and departing passengers by using CEM card readers.
Integrated airport-specific security management system
The card readers are interlocked so that if one reader is in
Passenger mode (for multiple throughput) the other can only be
put in Staff mode (for individual entry).
Check-In Desk Enabling
This feature provides control of and reporting on shared checkin desks. CEM card readers can be used to enable/disable
check-in desks or luggage carousels and provide data on
equipment usage by means of an operator swiping a valid card.
The system can provide a report on check-in desk usage which
can be sent to the finance system used to invoice airlines for
their use of the check-in desk.
Airbridge Control
The Airbridge Control feature is used to provide control over
the use of airbridges ensuring that only authorised and trained
personnel can use them. CEM card readers installed at each
airbridge ensure that operators must use a valid card before
it can be used. The system can provide a report on airbridge
usage which can be sent to the finance system used to invoice
airlines for their use of the airbridge.
Typical AC2000 Airport Topology
AC2000 Airport is a powerful aviation-specific access control
and security management system (SMS). Used by many of the
world’s leading airports for over 25 years, AC2000 Airport has a
proven record as one of the most reliable and resilient security
solutions available. The flexibility and high quality offered by
AC2000 Airport is a key factor in its suitability for the aviation
environment.
AC2000 Airport encompasses all the core software features of
the powerful AC2000 system with a host of additional functions
that have been specifically designed for airports including card
charging, authorisers, airport utilities and IATA code. AC2000
Airport is more than an access control system. It helps airports
to run more effectively in terms of both cost and operations,
incorporating features such as Check-In Desk Enabling,
Passenger Segregation and Air-bridge Control.
AC2000 Airport provides high levels of integration, providing
one powerful command and control front-end for alarm
management of multiple airport security systems; including
access control, video, intrusion, fire, perimeter detection and
much more.
CEM’s AC2000 Airport system offers zero downtime when
used in conjunction with CEM intelligent and advanced readers.
CEM readers feature a large internal database for offline card
validation that ensures airports are fully operational in the event
of temporary system downtime.
AC2000 Airport operational applications include:
ƒƒCheck-In Desk Enabling
ƒƒLuggage Carousel Enabling
ƒƒPassenger Segregation
ƒƒPanic Button Facility
ƒƒVehicles Management
ƒƒVisitor Management
10
ƒƒAirport Link
ƒƒDirect Link to Airport Invoicing
ƒƒCard Parking Facility
ƒƒEquipment Enable
ƒƒIntegrated biometrics
ƒƒVideo Integration
For product codes, please contact CEM Systems.
ƒƒAir-bridge Control
ƒƒAirport specific door modes
ƒƒCard Charging
And more!
11
AC2000 Software Modules
AC2000 System Comparison
AC2000 has a comprehensive set of
software applications that enhance site
operations.
*per single server
Criteria - Size
AC2000 Lite
AC2000
Number of Cardholders
10,000
Unlimited
Number of Doors supported
128
Unlimited
Number of Workstations supported
5
172*
Windows® based operator workstations
present the user with a familiar, easy to
use front-end.
Criteria - Software & Functionality
Standard Software Options
AC2000 Lite comes with a range of software options on one CD as standard. Some AC2000 software options are charged on an application
licence basis - see price list for further details.
Code
Description
AC2000 Lite
AC2000
SWAEDG
AED (Alarm Event Display) Graphical Maps Utility
SWVIPPSG
VIPPS - Photo ID Software
SWTANDA
Time and Attendance Reporting
SWVISIT
Visitor Management
SWVISIT-WEB
AC2000 WEB Visitor management










ID Badging
AC2000 VIPPS (Visual Imaging & Pass Production System)
The AC2000 VIPPS application
gives the operator a range
of video imaging facilities for
capturing personnel details,
including images, company
logos and personnel signatures
and incorporating these onto
professionally designed ID
passes.
Integrations (additional integrations are available)
SWSSL
Standard System Link (v5.4 upwards & Lite v6.4 upwards)
SWXML
XML Interface
SWAPI
Application Programming Interface (API)
SWOPCDA
OPC DA Interface
SWBACNET
BACNET Interface
SWDKEY
Deister Keysafe Interface (v6.1 upwards)
SWPDS-FFT
FFT CAMS Perimeter Detection System (v6.2 upwards)
SWDVR-AD
DVR Interface (American Dynamics Intellex Range)
SWHDVR-AD
American Dynamics HDVR Interface
SWVNVR-AD
American Dynamics VideoEdge Interface
SWVUVS-AD
American Dynamics victor Video Interface
SWADTVR-AD
American Dynamics TVR Interface (v6.5 upwards)
SWINT-GAL
Galaxy Dimension Interface
SWINT-DSC
DSC PowerSeries Interface
SWINT-INTEGRA
Satel Integra Alarm Interface (v6.7 upwards)
SWVINT-MATRI
MatriVideo Interface (v6.4 upwards)
SWFIRE-MX
Minerva MX Fire Interface (v6.4 upwards)
SWVINT-OMNI
Genetec Omnicast Video Interface (v6.3 upwards)
SWVINT-MILE
Milestone XProtect Corporate Video Interface (v6.5 upwards)
SWVINT-MOBO
Mobotix Video Interface (v6.6 upwards)
SWNVR-IV
IndigoVision NVR Interface
SWNVR-BO
Bosch NVR Interface (AC2000 v6.1 upwards)






























Other Functions
Lift Control
Database Partitioning
Failover Server software licence
12



Key Features
ƒƒSophisticated ID badging for staff,
contractors, visitors etc
ƒƒPasses can be individually
designed and customised to suit
customer tastes
AC2000 VIPPS also supports
fingerprint enrolment via the
S610f Fingerprint validation
reader meaning that a biometric data capture can take place at the same time as
other data capture.
Product Codes
SYS/004/007
AC2000 Workstation VIPPS - workstation with VIPPS Software
(SWVIPPSG) and video capture card installed.
SWVIPPSG
VIPPS - Photo ID software (Global)
Time & Attendance
AC2000 Time and Attendance
AC2000 Time and Attendance module is a reporting tool that offers administrators
statistics on the ‘in and out’ movements of staff. The module automates timeconsuming administrative tasks and provides accurate employee attendance data that
can be used with many third party products such as a dedicated payroll system for
accounting purposes.
Product Codes
SWTANDA
Time & Attendance
Reporting
13
AC2000 Software Modules
AC2000 Software Modules
Biometrics
Visitor Management
AC2000 Biometric Enrolment
AC2000 Visitors
The AC2000 Visitors application
provides a powerful tool to monitor and
control access for temporary visitor
cardholders.
Key Features
ƒƒSingle integrated solution for
both access control & biometric
enrolment
ƒƒIntegrated biometric process
Visitors can be given access levels and/
or traced; allowing visitor movements
to be monitored and controlled. Images
of documents such as appointment
cards can also be associated with Visitor
records.
removing the need for any third
party enrolment software or
hardware to be installed
Product Codes
Key Features
ƒƒEnables technology cards to be
issued to visitors and then returned
for future use; saving on visitor card
costs
Product Codes
SWVISIT
Visitor Management
AC2000 Biometric Enrolment comes as
standard with AC2000 Software
Integrated Alarm Monitoring
AC2000 AED (Alarm Event Display)
Using the CEM S610f reader
for biometric enrolment, system
administrators can enrol a
cardholder’s fingerprint template
onto the AC2000 server at
the same time as capturing
personnel details. The AC2000
software captures a unique ID
number of the biometric template
which is then stored into both the
AC2000 central server database
and the S610f fingerprint reader
database at the door.
AC2000 Biometric Enrolment Requirements:
ƒƒAC2000 software v5.7 upwards or AC2000 Lite software v6 upwards
ƒƒAn S610f Fingerprint Validation Reader
AC2000 AED is the integrated alarm
processing software and acts as
customer’s central Security Management
System (SMS), providing one graphical
user interface for the integration of third
party video systems. AED provides
dynamic and real-time graphical, audio
and text-based information on all alarms
and events that occur on the AC2000
system. AED provides users with a
wealth of useful alarms processing features including dynamic icons representing
device status, automatic zoom and advanced navigational tools.
Key Features
ƒƒOne user friendly and central
command and control interface
for access control and video
surveillance
See Integrations section for list of
CEM compatible integrations.
Product Codes
SYS/004/006
AC2000 Workstation AED (with Maps Utility) - workstation with AED
Software (SWAEDG) installed and 19˝ Monitor
SWAEDG
AED (Alarm Event Display) Graphical Maps Utility (Global)
AC2000 Zone Monitor
Zone Monitoring application offers
the ability for operators to monitor the
occupancy levels of a pre-defined area
of the site. A running total or count will
always be visible and updated in real
time as cardholders enter or exit the site.
Product Codes
AC2000 Zone Monitor & AC2000 Muster
Zones came as standard with the AC2000
software.
A real time running total of cardholders in
a defined area aiding customers health &
safety policy.
14
15
AC2000 Software Modules
AC2000 Software Modules
Reporting
AC2000 Muster Zones
The AC2000 Muster Zones application is used for emergency situations where card
holders must congregate in a dedicated ‘safe’ location. The application can be used
both in the evacuation of card holders to a location away from the site (or zone) or
when necessary it can be used to enable card holder’s to move to a particular safe
location within the premises. AC2000 Muster Zones is used in conjunction with the
AC2000 Zone Monitoring application.
AC2000 Extended Reports
The reporting capability of AC2000 is
extremely powerful. AC2000 Extended
Reports allows all AC2000 transactional
history to be automatically stored
for future reporting. Reports can be
generated to run on Alarms, Personnel,
Devices etc, as well as scheduled in
advance for regular review.
AC2000 Threat Levels
AC2000 Threat Levels allows for building
security to be completely reconfigured at
the click of a button.
AC2000 Threat Levels features
customisable security levels which can be
used to increase or decrease cardholder
access and verification requirements at
the door (for example Card and PIN and/
or Biometric) quickly and easily.
Key Features
AC2000 RTD features a dual window
option, allowing users to display full
screen image and transaction outcome in
addition to the standard view.
ƒƒReport Scheduler - Reports can
be frequently run & exported for
management purposes
Product Codes
AC2000 Extended Reports comes as
standard with AC2000 software.
ƒƒRemove/Change cardholder access
ƒƒRestrict access to certain areas
ƒƒIncrease verification methods at the
door in response to threat
Product Codes
Vehicle Management
AC2000 Vehicles
AC2000 Threat Levels comes as standard
with AC2000 software v6.6 & upwards
AC2000 Vehicles allows users to produce
a professional pass or vehicle tag for
all vehicles, with the ability to associate
cardholders to vehicle records. The
application stores details of vehicles on the
AC2000 system such as Vehicle Make,
Model and Registration number.
AC2000 Rolling Transaction Display (RTD)
Rolling Transaction Display is designed
to offer security a real-time personnel &
event monitoring tool. It allows staff to
visually identify cardholders prior to their
gaining access through a secure door.
Key Features
Key Features
ƒƒSecurity can visually verify
AC2000 Vehicles also features Vehicle AntiPassback, customised user definable fields,
document import and automatic vehicle
pass/tag disabling.
cardholders & associated events in
real-time
Key Features
ƒƒVehicle passes can be reused
on other vehicles providing cost
effective use of cards/tags
Product Codes
AC2000 Vehicles comes as standard with
AC2000 software.
Product Codes
AC2000 Rolling Transaction Display
comes as standard with AC2000 software.
AC2000 WEB Applications
As part of the AC2000 software, AC2000 WEB Applications allow users to access vital system
information quickly and easily, from anywhere in the world using only a web browser.
AC2000 Intercom
AC2000 Intercom is a software based intercom user
interface. AC2000 Intercom is used to provide bidirectional Voice over IP communication between the
emerald Intelligent Access Terminal (TS200 and TS300
versions only) and the AC2000 Client Workstation.
AC2000 Intercom also provides the ability to remotely
open any door that it is currently connected too.
Additional features include; the ability to call a local
emerald intelligent access terminal directly, call a
group of emerald access terminals or call other
AC2000 Intercom Clients.
AC2000 WEB Dashboard
AC2000 WEB dashboard is a central data
gathering application providing instant
access to system critical information.
Information including usage statistics,
trending, occupancy, top alarms, card
information, licensing and system
diagnostics are presented to system
operators via a range of dynamic, user
friendly graphs and tables.
Key Features
ƒƒUser-friendly intuitive point & click
interface
ƒƒCritical system information in a
centralised location
ƒƒAccess via any available web
browser that has access to server
ƒƒUsage statistics, trending,
occupancy, top alarms, card
information, and system diagnostics
Product Codes
SWINTERCOM
16
AC2000 Intercom
17
AC2000 Software Modules
AC2000 Software Modules
AC2000 WEB Visitor Management
AC2000 WEB Visitors provides a powerful
web based tool to control and monitor
visitor access from any location. This
powerful application allows the addition
of new visitor details, scheduling of visits,
issuing of cards, a multitude of reports and
much more.
The AC2000 WEB Visitors application is
ideal for customers who require quick and
efficient access to AC2000 functionality
without the need for dedicated software.
Product Codes
SWVISIT-WEB
AC2000 WEB Mimic
Key Features
ƒƒRemotely manage visitor access via
a standard web browser
ƒƒCost effective way for multiple users
within a facility to manage visitors
without having dedicated access
control software installed
filtering, alarm sorting, alarm
acknowledgement and alarm
cancel functionality
ƒƒSecure web page data transfer
utilising Hyper Text Transfer Protocol
with Secure Sockets Layer (HTTPS)
AC2000 WEB Rolling Transaction Display (RTD)
Key Features
AC2000 WEB RTD gives users the real
time monitoring power of the AC2000 RTD
in a convenient web interface. AC2000
WEB RTD allows staff to visually identify
cardholders prior to their gaining access
through a secure door.
Key Features
ƒƒReal time monitoring using the
AC2000 WEB interface
ƒƒMultiple views to choose from
ƒƒAutomatic display of cardholder
details
ƒƒAbility to delay door opening until
ƒƒWeb based access to view and edit
card transaction is verified
room bookings
AC2000 WEB Personnel XML Export
AC2000 WEB Reports
18
ƒƒWeb based access to alarm
the web prior to a scheduled visit
AC2000 WEB Room Booking
AC2000 WEB Reports is a web based
application that allows a system operator to
run and create customisable reports on all
alarms, transactions, devices, card parking,
guard tours, reader activity and much more
within the AC2000 System. Using AC2000
WEB reports can be quickly generated
based on the user’s own criteria. Report
templates can also be saved for quick and
easy use when required. The user can also
choose which time a report will run and
reports can then be scheduled and emailed to any email address either daily, weekly,
or monthly at specific time intervals.
Key Features
ƒƒRemotely upload visitor images via
AC2000 WEB Visitor Management
(licenced on AC2000 & AC2000 Airport)
Rooms are assigned on the AC2000 WEB
application and room bookings can be
made and viewed on the AC2000 WEB
Room Booking application or on the
emerald terminal via Remote Applications.
This allows specific cardholders to reserve
meeting rooms with ease with the ability to
search and display room details, add/edit
and delete their bookings.
AC2000 WEB Mimic provides web based
alarm event display for alarm monitoring,
allowing alarm filtering and alarm
acknowledgement/cancel from a web
browser.
Key Features
ƒƒInstant web access to Alarm and
Transaction reporting
ƒƒChoose to email, Print or ‘Save As’
a CSV file
Using the AC2000 WEB Personnel XML
Export tool, system users can export
AC2000 cardholder data in standard XML
format for use in a third party system, for
example Human Resources system.
Product Codes
SWXML-WEB
Key Features
ƒƒWeb based data export tool
ƒƒExtract cardholder data
ƒƒChoose to export specific company
and department data and filter for
different card status
AC2000 WEB Personnel
XML Export
ƒƒUsers can choose Date Ranges,
Devices, Cardholders and specific
card transaction outcomes
19
AC2000 Software Modules
AC2000 Software Modules
Multiple Site Application
Integrations
AC2000 Standard System Link
CEM AC2000 system is available with interfaces to a range of third party security
systems. CEM has a dedicated integration team which enables the development of
interfaces on request.
AC2000 Standard System Link offers the ability to link multi-site CEM AC2000
systems together. Designed for companies with multiple sites spread across
geographical areas, Standard System Link allows security & IT managers to globally
share card holder details/records. This removes this administrative duplication,
allowing for seamless multi-site access control.
ƒƒSeamless cardholder use over a
globally installed access control
system
ƒƒReport globally on Transactions and
Acting as the central security management system, the AC2000 system architecture
also supports high levels of integration, offering customers one central command and
control centre for access control, video, intrusion, perimeter detection etc.
Alarms across sites
Product Codes
SWSSL
Key Features
Standard System Link
AC2000 External Systems
The AC2000 External Systems application allows AC2000 to export access control
information to third party systems. It allows the user to specify the format of alarm
strings that are to be sent to the external system.
Product Codes
Key Features
ƒƒAllows simple integration to third
party systems without customisation
or development
AC2000 External Systems comes as standard with AC2000 software.
20
21
AC2000 Software Modules
AC2000 Software Modules
Video Interfaces
AC2000 exacqVision Interface
The AC2000 exacqVision interface to
exacqVision Hybrid DVR (HDVR) and NVR video
servers enables AC2000 to act as a flexible and
fully integrated Security Management System
(SMS). The interface provides the ability to
define video alarm actions, view live footage as
alarms occur, control cameras and run camera
presets.
AC2000 American Dynamics TVR Interface
Key Features
ƒƒSeamless integration with
exacqVision HDVR and NVR servers
ƒƒAssociate access control alarms
with digital video footage
Product Codes
SWNVR-EX
The AC2000 video interface for American
Dynamics Embedded ADTVR provides the
ability to associate access control alarms
with digital video clips and to view live
camera footage. This enables AC2000 to
act as the central Security Management
System (SMS).
Key Features
ƒƒAssociate access control alarms
with digital video footage
ƒƒLive video feed activated directly
from AC2000 AED application
Product Codes
exacqVision NVR/HDVR
Interface
SWADTVRAD
American Dynamics
ADTVR Interface
AC2000 American Dynamics Intellex DVMS Interface
AC2000 interfaces with American Dynamics
Intellex® video management solution, providing
the ability to associate access control alarms
with digital video clips. Using the central
AC2000 AED application, a DVR Viewer gives
the operator a range of video imaging facilities
to generate alarm reports with associated
live video footage, as well as control camera
positioning.
Key Features
ƒƒFully integrated and seamless
access control and video solution
with American Dynamics DVMS
Intellex
Product Codes
SWDVR-AD
DVR Interface (American
Dynamics Intellex® range)
AC2000 victor Video Interface
The AC2000 victor interface allows access
control alarms to be sent to the American
Dynamics victor unified video solution
where they can be associated with
video actions. Additionally, the AC2000
victor interface allows control of AC2000
devices from within the victor unified
client, supporting access control features
such as remote door Lock/Unlock and
Oneshot-‘remote door open’.
AC2000 American Dynamics Hybrid Video Recorders Interface
The AC2000 video interface for American
Dynamics Hybrid-DVR (HDVR) provides the
ability to associate access control alarms with
digital video clips and to view live camera
footage. This enables AC2000 to act as the
central Security Management System (SMS).
22
American Dynamics VideoEdge NVR Interface
ƒƒAllows Victor users to remotely
open/close AC2000 controlled
doors
Product Codes
SWVUVS-AD American Dynamics victor
Interface
Dynamics HDVR
ƒƒAssociate access control alarms
with digital video footage
AC2000 VideoEdge NVR Interface
SWVNVR-AD
with live video footage
ƒƒSeamless integration with American
SWHDVR-AD American Dynamics HDVR
Interface
Product Codes
ƒƒAssociate access control alarms
Key Features
Product Codes
The AC2000 video interface for American
Dynamics VideoEdge v4.0 Network Video
Recorder (NVR) provides the ability to associate
access control alarms with digital video clips.
AC2000 seamlessly integrates with VideoEdge
NVR’s, giving the operator a range of video related
facilities to generate alarm reports with recorded
video playback. The interface also allows system
operators to view live video feed, configure live video popup on alarm, export video
playback clips, take video snapshots, and control camera positioning and presets.
Key Features
Key Features
ƒƒSeamless integration with American
Dynamics VideoEdge Network
Video Recorder
ƒƒAssociate access control alarms
with digital video footage
AC2000 IndigoVision NVR Interface
AC2000 provides the ability to associate
access control alarms with IndigoVision
digital video. The IndigoVision interface
seamlessly integrates to live and recorded
video footage on the IndigoVision Control
Centre.
The operator is provided with a range
of video imaging facilities to generate
alarm reports with associated video,
while simultaneously viewing live video
feed. Utilising two way communications,
AC2000 can send and receive both access control and video alarms, allowing for a
complete security and video management system.
Key Features
ƒƒCentrally manage IndigoVision
alarms via AC2000
Product Codes
SWNVR-IV
IndigoVision NVR (Network
Video Recorder) Interface
ƒƒDisplay up to 16 individual camera
feeds simultaneously in a single
screen virtual matrix
ƒƒLive video feed activated directly
from AC2000 AED (Alarm and Event
Display) application
23
AC2000 Software Modules
AC2000 Software Modules
AC2000 Bosch VRM Interface
The AC2000 video interface for BOSCH
provides the ability to associate access
control alarms with BOSCH CCTV and
video clips. If an alarm event contains
associated video footage, the operator
can access the footage within the
AC2000 AED (Alarm Event Display) which
will enable a DVR viewer.
AC2000 Mobotix Interface
AC2000 Mobotix provides the ability to
associate access control alarms with digital
video clips. The AC2000 ‘DVR Viewer’
module seamlessly integrates with Mobotix
cameras, giving the operator a range of
video imaging facilities to generate alarm
reports with recorded video playback. The
interface also allows system operators to
view live video feed and control camera
positioning and presets.
Key Features
ƒƒCentrally manage BOSCH alarms
via AC2000
ƒƒAssociate live video feed directly
from AC2000 AED application
Product Codes
SWNVR-BO
Bosch NVR (Network
Video Recorder) Interface
(AC2000 v6.1 upwards)
AC2000 Bosch VMS Interface
The AC2000 video interface for BOSCH Video Management System (VMS) provides
the ability to associate access control alarms with Bosch VMS digital video clips
enabling AC2000 to act as the central Security Management System (SMS).
Product Codes
SWINT-BOSCHVMS AC2000 BOSCH VMS Interface
Key Features
ƒƒFull two way integration
ƒƒView live and recorded CCTV
footage within the AC2000 system
Product Codes
SWVINT-MOBO
Mobotix camera integration (AC2000 v6.6 & upwards)
AC2000 Milestone XProtect Corporate Interface
Key Features
ƒƒLive video feed activated directly
from AC2000 AED (Alarm Event
Display) application
ƒƒLive video pop-up based on
priority or time
AC2000 Milestone XProtect Corporate provides the ability to associate access control
alarms with digital video clips. The interface also allows system operators to view live
video feed and control camera positioning and presets.
Product Codes
SWVINT-MILE
Key Features
Milestone XProtect Corporate Video Interface (AC2000 v6.5 & upwards)
ƒƒFull two way integration
ƒƒView live and recorded CCTV
footage within the AC2000 system
AC2000 Genetec Omnicast Interface
AC2000 Pelco Endura Interface
The AC2000 video interface for Pelco Endura provides the ability to associate access
control alarms with Pelco Endura digital video clips, giving the operator a range of
video imaging facilities to generate alarm reports with recorded video playback. The
interface also allows system operators to view live video feed and control camera
positioning.
Key Features
ƒƒLive video feed activated directly
Product Codes
SWINT-PELCO
AC2000 Genetec Omnicast provides the ability to associate access control
alarms with digital video clips. This enables AC2000 to act as the central Security
Management System (SMS).
AC2000 Pelco Endura Interface
from AC2000 AED (Alarm Event
Display) application
In addition, AC2000 alarms can be configured to display on the Genetec Omnicast
System. This allows for further alarm processing, logging, and cause and effect
outside of the AC2000 system.
ƒƒFull two way integration
ƒƒView live and recorded CCTV
footage within the AC2000 system
Product Codes
SWVINT-OMNI
Key Features
Genetec Omnicast Video Interface (AC2000 v6.5 & upwards)
ƒƒDisplay AC2000 alarms through
Omnicast System
ƒƒLive video pop-up based on
priority or time
AC2000 Genetec Security Center Interface
The AC2000 video interface for Genetec
Security Center provides the ability to
associate access control alarms with
Genetec digital video clips. The AC2000
DVR Viewer module seamlessly integrates
AC2000 with Genetec Security Center,
giving the operator a range of video imaging
facilities to generate alarm reports with
recorded video playback.
AC2000 MatriVideo Interface
The AC2000 video interface for Instek Digital MatriVideo provides the ability to
associate access control alarms with MatriVideo digital video clips, as well as to view
live camera footage. This enables AC2000 to act as the central Security Management
System (SMS).
ƒƒSeamless integration with Instek
MatriVideo
Product Codes
SWVINT-MATRI
Key Features
MatriVideo Interface (AC2000 v6.3 & upwards)
ƒƒAssociate Access Control alarms
with digital video footage
ƒƒLive video feed activated directly
from AC2000 AED application
ƒƒLive video pop-up based on priority
Product Codes
SWINT-GENETSC
24
Key Features
AC2000 Genetec Security Centre Interface
or time
25
AC2000 Software Modules
AC2000 Software Modules
Intruder Interfaces
AC2000 Satel Integra Alarm Interface
The AC2000 Satel Integra alarm interface enables
alarms from Integra alarm panels to be fully integrated
with the AC2000 security management system. Using
the AC2000 Satel Integra interface and the central
AC2000 AED (Alarm Event Display) graphical maps,
system operators can quickly identify an intruder
alarm and its exact location on site. This allows for a
fast response time and a centralised and integrated
viewpoint of both security systems.
AC2000 Honeywell Galaxy Dimension Interface
The AC2000 Galaxy® Dimension interface
enables alarms from Galaxy intruder panels
to be integrated with the AC2000 security
management system. This enables AC2000 to
act as the central Security Management System
(SMS).
Key Features
ƒƒFully integrates with Honeywell
Galaxy Dimension intruder panels
with the access control system.
One seamless solution for ease of
administration
Product Codes
SWINT-GAL
Product Codes
SWINT-INTEGRA
AC2000 Satel Integra Alarm Interface
Key Features
ƒƒSeamless integration of AC2000
access control and Satel Integra
intruder Alarm System
ƒƒActivated alarms and panel
condition shown instantly within
AC2000 AED (Alarm Event Display)
application for central monitoring
ƒƒSupports Ethernet networks
AC2000 AC2000 Galaxy Dimension Interface
Perimeter Detection
AC2000 FFT Cams 3 Interface
The AC2000 Future Fibre Technologies (FFT) Central
Alarms Monitoring System 3 (CAMS 3) interface
for perimeter detection allows alarms and events,
Controllers and Zones from a FFT CAMS 3 installation to
be incorporated into AC2000. This enables AC2000 to
act as the central Security Management System (SMS).
DSC PowerSeries Intruder Interface
The AC2000 DSC PowerSeries intruder interface
enables alarms from DSC intruder panels to be fully
integrated with the AC2000 security management
system. The AC2000 DSC interface enables inputs from
intruder panels to be placed as icons on a single alarm
display screen-the CEM AED (Alarm & Event Display)
application. This provides a graphical representation of
the physical layout of intruder sensors and allows for central alarm monitoring of both
access control and intruder alarms.
Product Codes
SWINT-DSC
AC2000 DSC PowerSeries Intruder Interface licence
Key Features
ƒƒSeamless integration of access
control system & DSC intruder
system
ƒƒHigh level Bi-directional integration
of DSC intruder panels
to remotely arm/disarm DSC panels
& alarms
ƒƒActivated alarms shown instantly
The AC2000 Permaconn interface allows AC2000 access control alarms to be
transmitted to the Permaconn dialler as ContactID event codes. This provides the
ability to monitor access control and intruder alarms from a central location.
alarms and events into the
AC2000 AED (Alarm Event Display)
application
ƒƒView real-time activity directly from
the AC2000 AED application
integrated, AC2000 Video alarm
pop-up feature based on priority or
time can be activated
SWINT-FFTCAMS AC2000 FFT CAMS 3 Interface
Other Interfaces
AC2000 Application Programming Interface (API)
AC2000 Application Programming Interface (API)
provides a standardised and convenient way for
developers to interface an external system into the
AC2000 system.
Key Features
ƒƒThis eradicates the need to design
and develop custom interfaces
Product Codes
Key Features
SWAPI
Application Programming Interface
ƒƒIntegration between AC2000 and
remote Central Monitoring Stations
(CMS)
ƒƒAC2000 Alarms transmitted as
ContactID event codes to CMS
ƒƒHighly secure, encrypted connection
to the CMS
Microsoft Active Directory Integration
AC2000 Microsoft Active Directory integration provides tighter system security
and support for corporate IT user management and authentication. Based on the
Lightweight Directory Access Protocol (LDAP) the AC2000 Microsoft Active Directory
integration provides AC2000 cardholder record synchronisation and Microsoft
Windows Single Sign-On (SSO). Access to the AC2000 system can be granted to
users after using their Windows login credentials.
Key Features
ƒƒSingle sign on using Window
credentials
ƒƒAllows instant access to AC2000
software without need to enter
username and password
ƒƒImport and continual updating of
Product Codes
26
ƒƒIncorporate perimeter defence
ƒƒIf external CCTV systems are also
Product Codes
ƒƒIntegrated virtual DSC keypad used
within AC2000 AED (Alarm &
Event Display) module-DSC panels
sensors/icons placed on AED Maps
AC2000 Permaconn Interface
Key Features
SWINT- DIM
AC2000 Active Directory – Data Import
SWINT- SSO
AC2000 Active Directory – Single Sign on
cardholder records removing need
for data entry duplication
27
AC2000 Software Modules
AC2000 Software Modules
CEM Hardware
AC2000 Minerva MX Fire Interface
The AC2000 interface to the Tyco Minerva MX Range of Fire Panels enables alarms
or events generated for MX Panels, Sensors and Zones to be fully integrated with the
AC2000 security management system.
Product Codes
SWFIRE-MX
Key Features
ƒƒSeamless integration of AC2000
software with the Tyco Minerva MX
Range of Fire Panels
Minerva MX Fire Interface
CEM consistently leads the industry in development of hardware and have developed
several industry firsts including:
ƒƒPortable ‘handheld’ card reader
ƒƒEthernet based IP card readers
ƒƒFully Integrated Biometrics
ƒƒPower over Ethernet plus (PoE+) door control
ƒƒIntelligent card readers with in-built memory
AC2000 Deister Keysafe Interface
The CEM Deister Keysafe Interface
allows select personnel details from the
AC2000 system to automatically populate
the Deister ‘proxSafe’ system. AC2000
automatically exports a list of authorised
keysafe access users, which is imported
into the proxSafe server.
Key Features
ƒƒIntegrated solution for access
control and securing keys and
valuable equipment
ƒƒReduces duplication of records and
administration time of two separate
systems
Product Codes
SWDKEY
AC2000 Deister Keysafe
Interface (v6.1 upwards)
Controllers
S9032/S9064 Controller
When choosing serial card readers, the S9032 and S9064 Controllers are central
components of the AC2000 system. The controllers are intelligent networked devices
for door entry/exit control and alarm monitoring.
The controllers provide full Ethernet connectivity, allowing users to remotely perform
database administration and monitor alarms. The administrator can use web based
user interfaces to remotely monitor the controller status at any time. In the event of
communications failure with the host server, card transactions and alarms are stored in
memory and will be uploaded to the host when communications are restored.
Key Features
ƒƒFully scalable access control
solution. To support more doors
customers simply add another
controller to seamlessly support
serial readers
ƒƒBattery backup means the unit will
continue to function even in the
event of power failure
Salto Sallis Wireless Locks Integration
The AC2000 Salto Sallis Wireless Locks
interface enables the monitor and control
wireless locks within AC2000. Locks are added
into the AC2000 system allowing for remote
monitoring of alarms and remote door opening.
Key Features
ƒƒSeamless integration with
Product Codes
AC2000
SWSALTO-16
Salto Sallis 16 Door License
SWSALTO-32
Salto Sallis 32 Door Licence
SWSALTO-64
Salto Sallis 64 Door Licence
SWSALTO-128
Salto Sallis 128 Door Licence
SWSALTO-192
Salto Sallis 192 Door Licence
SWSALTO-256
Salto Sallis 256 Door Licence
AC2000 Salto Off-line locks interface
The CEM AC2000 interface to Salto off-line locks allows communication with the
Salto server and control of cardholder access permissions to off-line locks, directly
from AC2000 Access Control System. This seamless interface supports bi-directional
communication with the Salto system utilizing SHIP (Salto Host Interface Protocol).
Product Codes
Product Codes
DAC/390/032
S9032 Controller - supports up to 32 doors (64 readers IN/OUT)
DAC/390/064
S9064 Controller - supports up to 64 doors (128 readers IN/OUT)
ƒƒEasy to install
ƒƒLive door monitoring
RTC - Ethernet Reader Controller licence
Key Features
ƒƒSeamless integration with CEM
AC2000 System.
ƒƒUnlimited number of off-line locks
supported.
ƒƒOff-line lock control is suitable for
storage areas, lockers and office
spaces etc. where real-time security
monitoring in not a priority.
The AC2000 RTC (Real Time Computer) is a software controller required for use
with Ethernet based CEM readers and devices as part of the AC2000 and AC2000
Airport access control systems. The RTC software provides Ethernet reader controller
software which is used by CEM readers and devices to communicate with the central
CDC server. It has its own subset of the CDC server database which it uses to
communicate to the readers. The RTC is used with CEM Ethernet devices such as the
S610e reader, S610f reader, S3040 portable reader range, eDCM 300 (Door Control
Module), eDCM 330 (Door Control Module), eDCM 300 Input/Output Module and the
EIOC (Ethernet Input/Output Controller).
Key Features
ƒƒRTC distributes AC2000 database
changes to connected CEM
Ethernet readers and devices
ƒƒA single CDC server can use 256
RTC’s to support up to 60,000+
readers doors-offering a powerful
and fully scalable solution
SWSHIP-16
Interface license for up to 16 door Salto Off-line locks
SWSHIP-32
Interface license for up to 32 door Salto Off-line locks
SWSHIP-64
Interface license for up to 64 door Salto Off-line locks
SWENET128
RTC - Ethernet Reader Controller Licence (1 to128 doors)
SWSHIP-128
Interface license for up to 128 door Salto Off-line locks
SWENET256
RTC - Ethernet Reader Controller Licence (1 to 256 doors)
SWSHIP-192
Interface license for up to 192 door Salto Off-line locks
SWENETUPG128-256
RTC - Ethernet Reader Controller Upgrade Licence (from 128 to 256 doors)
SWSHIP-256
Interface license for up to 256 door Salto Off-line locks
SYS/101/300
RTC - Ethernet Reader Controller (PC with SWENET256 software installed)
28
Product Codes
29
AC2000 Software Modules
CEM Hardware
DCM 300 - Low cost, two door controller
Available in both Ethernet and Serial options,
the DCM 300 (Door Control Modules) are low
cost, two-door intelligent controllers designed
to interface third-party read heads with the CEM
range of AC2000 access control systems.
eDCM 300
The eDCM 300 has an on-board Ethernet
connection and communicates directly with
the AC2000 central system. The eDCM 300
gives full off-line validation and decision making
capability at the point of entry, when host
communication is not available. The eDCM 300
supports third-party access control read heads
conforming to the physical Wiegand/Mag Stripe (data/data) interfaces, covering a
range of technologies from RF Proximity to Biometric devices.
Key Features
DCM 380 – PoE+ Two Door Controller supporting sPass
Readers
ƒƒEnables third party readers to be
eDCM 380
used on the CEM AC2000 system
The eDCM 380 is a low cost, two door
controller designed to interface to CEM sPass
DESFire smart card readers and the CEM range
of access control systems. Power over Ethernet
Plus (PoE+) connectivity also has the benefit
of eliminating the need for an external local
mains power supply at the door. The eDCM
380 supports CEM sPass DESFire smart card
readers via encrypted RS485 interface.
For critical doors CEM recommends
using advanced CEM card readers
ƒƒSupport for two doors
ƒƒStructured database allows storage
of large amounts of cardholder
records for off-line card validation
ƒƒOnboard LED-provides visual status
ƒƒEight Supervised inputs (four
available per door)
Product Codes
DCM/380/101
sDCM 300
eDCM 380 (Incl. Enclosure)
The sDCM 300 communicates with the AC2000 host system via RS485
communications to an S9032/64 serial controller. Like the eDCM 300, the sDCM 300
provides full off-line validation and supports third-party access control read heads
conforming to the physical Wiegand/Mag Stripe (data/data) interfaces.
Product Codes
DCM/310/006
sDCM 300 (Board Only)
DCM/310/101
sDCM 300 (Incl. 12v Power Supply & Enclosure)
DCM/300/006
eDCM 300 (Board Only)
DCM/300/101
eDCM 300 (Incl. 12v Power Supply & Enclosure)
DCM 330 - PoE+ Two Door Controller
eDCM 330
The eDCM 330 is a low cost two door controller
that utilises Power over Ethernet Plus (PoE+)
connectivity and has the benefit of eliminating
the need for an external local mains power
supply at the door. The unit can power all door
furniture and two heavy duty maglocks via a
single CAT 5e/6 network cable.
Key Features
ƒƒEnables third party readers to be
used on the CEM AC2000 system
For critical doors CEM recommends
using advanced CEM card readers
ƒƒOn-board 10/100 Mbps PoE+
Ethernet connectivity to power
the reader and doors via a single
CAT5e/6 cable-no local mains
power required
ƒƒInternal database holds large
amounts of cardholder records at
the door for off-line card validation
Product Codes
DCM/330/101
eDCM 330 (Intelligent 2 door Power over Ethernet (PoE+) controller)
with enclosure
ƒƒEasy to install
ƒƒDedicated tamper unit
ƒƒLow cost method of controlling up
to two doors
30
31
CEM Hardware
CEM Hardware
The Solution to Card Cloning…
sPass DESFire Smart card reader
Card Cloning refers to the copying of an access control card or fob in order to
compromise electronic door security on an access control system. Sometimes referred
to as ‘card spoofing’, a device is introduced to either duplicate a card or impersonate
it. Card Cloning can best be combated using CEM’s intelligent S610 reader range
which offers two or three layers of authentication (card & PIN or card, PIN & Biometric). CEM also offers a solution for cases where a panel approach is required using the
CEM DCM 350 controller and sPass reader.
The CEM sPass reader is a low cost,
contactless smart card reader with powerful
security and encryption features. The sPass
reader utilises 3DES (Triple DES) encryption and
highly secure DESFire technology. It is designed
to be connected to the CEM DCM 350
encrypted two-door controller, with encrypted
RS485 serial communications between the sPass reader and the controller. Combined
as one solution, the sPass reader and DCM 350 controller offer a cost effective
solution which combats against the threats of card cloning and Wiegand controller
signal cloning.
sPass reader, DCM 350 controller &
CEM DESFire card
Product Codes
technology-3DES authentication
ƒƒSecure RS485 serial encrypted
communications to the DCM 350
controller-eliminates the threat of
Wiegand signal cloning
ƒƒNo permanent keys reside in the
sPass reader
ƒƒNo programming or set up required
ƒƒAvailable with keypad for added PIN
ƒƒAvailable in grey or black
RDR/D10/100
sPass DESFire Reader
RDR/D10/101
sPass DESFire Reader with keypad
Black Version
The CEM end-to-end DESFire solution offers a low cost, yet highly
secure solution when a panel approach is required. When opting for
a DESFire solution customers can either use the CEM S610 DESFire
reader or the CEM sPass reader with the DCM 350 RS485 encrypted
controller. The CEM contactless DESFire smart card completes the
solution by utilising 3DES (Triple DES) encryption and featuring a prepersonalised card memory structure for customer convenience.
Encryption at
every level
RDR/D10/110
sPass DESFire Reader
RDR/D10/111
sPass DESFire Reader with keypad
CEM DESFire Smart card
The CEM DESFire 13.56MHz read/write
contactless smart card can be used for a range
of different applications from access control to
other applications such as cashless vending
and public transportation. Using a standardised
Mifare Application Directory (MAD), the card
contains a structured file system offering
security for multiple applications and to support future growth.
DCM 350 (Door Control Module)
The CEM DCM 350 (Door Control Module) is a
low cost, two-door controller that is designed
to interface to CEM sPass DESFire smart card
readers. By utilising encrypted RS485 serial
communications between the eDCM 350
controller and the sPass reader, the threat of
Wiegand controller signal cloning is effectively
eliminated. The DCM 350 is available in two
options-the sDCM 350 supports serial devices
while the eDCM 350 supports IP devices.
ƒƒUtilises highly secure DESFire
security
Grey Version
Combats against card cloning & Wiegand
signal cloning.
Benefits
Benefits
ƒƒSupport for two doors
ƒƒEnables sPass readers to be used
on the CEM AC2000 system.
ƒƒRS485 encrypted communications
between controller & sPass reader
eliminates the threat of Wiegand
signal cloning
ƒƒInternal database for offline card
validation
ƒƒSelf resetting fuses-saves
Utilising 3DES (Triple DES) encryption, the CEM DESFire card information is securely
stored on the card, ensuring that the card cannot be cloned and that only valid cards
are granted access.
Benefits
ƒƒUtilises highly secure 13.56MHz
MiFare DESFire smart card
technology
ƒƒPre-personalised card memory
allowing for usage in other system
such as cashless vending
ƒƒHighly secure Triple DES (3DES)
encryption
ƒƒNo keys or file management costs
The CEM DESFire Smart card is available for use on the CEM complete reader rangeemerald, S610 range, S610f and sPass reader range.
Product Codes
CRD/218/004
CEM DESFire Card 4k byte – 3 DES encryption
CRD/218/008
CEM DESFire Card 8k byte – 3 DES encryption
CRD/229/004
CEM DESFire Card 4k byte – AES – 128 – bit encryption
CRD/229/008
CEM DESFire Card 8k byte – AES – 128 – bit encryption
maintenance time
Product Codes
DCM/350/005
eDCM 350 (Board Only)
DCM/350/101
eDCM 350 (Includes enclosure, board & power supply/battery charger)
DCM/351/005
sDCM 350 (Board Only)
DCM/351/101
sDCM 350 (Includes enclosure, board & power supply/battery charger)
32
33
CEM Hardware
CEM Readers
Which readers to use?
CEM readers are the most advanced readers in the industry, featuring a Keypad
for PIN security, an LCD display for reader messages and an internal database for
offline operation at the secure door. Some customers may choose to install emerald
terminals at the building entrance and S610e readers at the building exit, with S610f
fingerprint readers then installed at high security areas in the building such as server
rooms.
CEM Hardware
“CEM readers
are the most
advanced
readers in the
industry.”
emerald Intelligent Access Terminal Range
Key Features
ƒƒIndustry’s most advanced
multifunctional IP access terminal
ƒƒUser-friendly 4.3˝ LCD touch screen
ƒƒIntuitive Graphical User Interface
enhancing user experience at the
door
ƒƒAbility to run Remote Applications
from AC2000 Central Database
Server (TS300 only)
ƒƒMaintenance Information/Security
CEM Reader range
Intelligence Point
ƒƒFully integrated VoIP intercom
functionality (TS200 & TS300 only)
S610f Fingerprint Reader
ƒƒPIR motion detection
ƒƒEthernet Reader & Controller in one
For security critical areas such
as server rooms
device
ƒƒFour analogue inputs to monitor
DCM (Door Control Module)
Intelligent two door controller
To Interface third party readers or
the CEM sPass reader to AC2000
or to monitor inputs e.g. window
sensors, PIRs and non access
control doors
emerald is a multi functional intelligent access terminal, that is revolutionising the
security industry. With its sleek design and LCD touch screen, emerald provides a
range of features that are truly unique. Available in three options to suit a range of
business needs, emerald is a powerful reader and controller in one, featuring a fully
integrated VoIP intercom and a range of Remote Applications that provide a whole
new multifaceted access control experience.
emerald Requirements
AC2000 software v6.6 upwards
alarm conditions and two
changeover relay outputs to activate
door strike or other equipment
ƒƒOff-line database for 250,000
cardholder records
ƒƒSupport for a range of smart card
technologies
ƒƒPower over Ethernet Plus
technology
ƒƒEasy to install
S610 Reader
For external doors
Sophisticated LCD Touch screen
A bright, scrollable 4.3˝ graphical LCD touch screen with hardened glass, displays predefined messages
and icons to cardholders depending on their privileges e.g. Wrong Zone, Lost/Stolen Card, Card About
to Expire and Access Granted. With a built-in mini PIR sensor, the terminal features motion detection and
automatically lights up upon detecting an approaching person.
S3040 Portable Reader range
For roaming checks inside and
outside the premises
IP Reader & Controller
emerald communicates directly to the CEM AC2000 host server using Ethernet connectivity, removing
the need for an additional controller in the system design. The terminal has a large internal database that
enables it to operate in offline mode. In off¬line mode the terminal can hold up to 250,000 cardholder
records and 50,000 card transactions.
VoIP Intercom (TS200/300 versions only)
The emerald intelligent access terminal has fully integrated audio intercom functionality which provides the
ability to initiate bi-directional audio communications upon user requests.
See CEM readers LIVE in action www.cemsys.com/videos.php
34
35
CEM Hardware
CEM Hardware
Remote Applications (TS300 only)
S610 Reader Range
Remote Applications are web based applications and services hosted on the AC2000 central database
server and accessed directly at the door. The Remote Applications display system information such as card
status, scheduled visitors, change PIN. Maintenance Applications also include devices with most alarms
and device settings which allow engineers to locally diagnose devices and change network information
remotely. This uniquely positions emerald as a security intelligent point, with AC2000 system intelligence
available for use at the door.
Key Features
ƒƒLCD to display reader messages
such as ‘Lost Stolen Card’, ‘Wrong
Time Zone’ and ‘Access Granted’
ƒƒMessages can be configured
via AC2000 software & can be
translated into local languages
ƒƒInternal database allows storage of
large amounts of cardholder records
for off-line card validation. Over
200,000 card records are stored in
the reader’s internal database and
8,000 transactions are stored off-line
emerald TS100
ƒƒLarge 4x3 keypad for optional PIN
Intelligent Access Terminal
emerald TS100 offers high levels of security at the door using the latest technologies, including a
scrambled keypad option for PIN verification. As a powerful IP reader and controller in one device, the
TS100 features an on-board 100Mbps Ethernet connection and communicates directly with the AC2000
host server. This removes the need for an additional intelligent control panel in the security system design.
Product Codes
TSR/100/105
emerald TS100 intelligent access terminal (MiFare CSN/ DESFire CSN/CEM DESFire)
TSR/100/108
emerald TS100 intelligent access terminal (iClass & iClass SE)
security
ƒƒ4 analogue inputs to monitor alarm
conditions and 2 changeover relay
outputs to activate equipment
The CEM S610 reader range offer keypad for optional PIN security, a backlit LCD
for displaying reader messages such as ‘Wrong Zone’, ‘Lost/Stolen Card’, ‘Access
Granted’ and an internal database giving full off-line validation at the door at all times.
The readers are designed to suit the look and feel of modern buildings.
ƒƒSimplified installation-S610 reader
communicates directly to host
server; no need for an additional
controller in the system design
ƒƒIP 66 rated polycarbonate enclosure
protects against dust and water
ƒƒAvailable in grey or black
emerald TS200
Intelligent Access Terminal & VoIP Intercom
emerald TS200 features an innovative LCD touch screen, advanced access control functionality and built-in
VoIP intercom, all in one powerful device. The terminal not only controls access to restricted areas but also
gives users fully integrated intercom functionality at the door. Featuring a built-in microphone and speaker,
the TS200 supports integrated intercom functionality by providing two way communications upon user
requests.
S610e Reader
Multi-technology, intelligent IP card reader
CEM S610e reader utilises Ethernet connectivity allowing it to
communicate directly with the AC2000 host server, removing
the need for an additional intelligent control panel in the
system design-the industry’s most advanced IP card reader.
Product Codes
TSR/200/105
emerald TS200 intelligent access terminal (MiFare CSN/ DESFire CSN/CEM DESFire)
TSR/200/108
emerald TS200 intelligent access terminal (iClass & iClass SE)
emerald™ TS300
S610s Reader
Multi-technology, intelligent serial card reader
The CEM S610s reader has an RS485 serial port allowing it
to communicate with the AC2000 host system via the S9032
or S9064 controller.
Intelligent Access Terminal with VoIP Intercom & Remote Applications
With all the features of the emerald TS100 and TS200 as standard, one of the unique features of theTS300
Terminal is the ability to run applications that are remotely hosted on the central AC2000 database server.
Available to certain users with specific access permissions, these applications display critical statistics and
information important for system maintenance, such as top system alarms and most recent alarms on the
terminal.
Product Codes
36
TSR/300/105
emerald TS300 intelligent access terminal (MiFare CSN/ DESFire CSN/CEM DESFire)
TSR/300/108
emerald TS300 intelligent access terminal (iClass & iClass SE)
S610 Exit Reader
The S610 Exit readers are designed for any area where exit
door control is required in addition to entry control. S610
Exit readers can be used in conjunction with the S610s and
S610e card readers for associated exit access.
37
CEM Hardware
CEM Hardware
Product Codes
S610f Fingerprint Reader
S610e Reader
Integrated fingerprint card reader
Grey Version
RDR/610/101
S610e Card Reader with PIN (125kHz HID Proximity)
RDR/610/104
S610e Multi Technology Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/610/105
S610e Card Reader with PIN (Mifare CSN) Smartcard
RDR/610/107
S610e Card Reader with PIN (DESFire) Smartcard
RDR/610/608
S610e Card Reader with PIN (iClass SE) Smartcard
RDR/610/109
S610e Card Reader with PIN (No Read Tech) supports 2 wiegand readers
The S610f Fingerprint Reader has all the features of
the S610 range but with the added benefit of biometric
verification. It is a fully integrated biometric and access
control reader that is used to control access to restricted
areas where an additional biometric layer of security
is required. The reader, which has on-board Ethernet
connection, communicates directly with the AC2000
host server removing the need for an intelligent control
panel in the system design. Featuring a controller,
advanced IP card reader and single biometric solution
all in one device, the S610f fingerprint reader meets
requirements for three stage identity authentication (card,
PIN, and biometric verification).
Black Version
RDR/610/111
S610e Card Reader with PIN (125kHz HID Proximity)
RDR/610/114
S610e Multi Technology Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/610/115
S610e Card Reader with PIN (Mifare CSN) Smartcard
RDR/610/117
S610e Card Reader with PIN (DESFire) Smartcard
RDR/610/618
S610e Card Reader with PIN (iClass SE) Smartcard
RDR/610/119
S610e Card Reader with PIN (No Read Tech) supports 2 wiegand readers
Key Features
ƒƒIndustry’s most advanced IP
fingerprint card reader
ƒƒFast fingerprint verification and offers
three layers of security-Card, PIN
and fingerprint
ƒƒIntegrated fingerprint solutionFingerprints are captured and
enrolled on the AC2000 system at
the same time as card personnel
details captured
ƒƒSecure biometric storagefingerprints captured and securely
encrypted and stored on the
AC2000 host system
S610f Fingerprint Reader
S610s Reader
Grey Version
RDR/615/101
S610f Fingerprint Card Reader with PIN (with onboard 125kHz HID Proximity)
RDR/615/105
S610f Fingerprint Card Reader with PIN (Mifare CSN) Smartcard
RDR/611/101
S610s Card Reader with PIN (125kHz HID Proximity)
RDR/615/608
S610f Fingerprint Card Reader with PIN (with onboard iClass SE) Smartcard
RDR/611/104
S610s Multi Technology Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/615/107
S610f Fingerprint Card Reader with PIN (DESFire) Smartcard
RDR/611/105
S610s Card Reader with PIN (Mifare CSN) Smartcard
RDR/615/104
S610f Fingerprint Multi Technology Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/611/107
S610s Card Reader with PIN (DESFire) Smartcard
RDR/611/608
S610s Card Reader with PIN (iClass SE) Smartcard
RDR/611/109
S610s Card Reader with PIN (No Read Tech) supports 2 wiegand readers
“CEM was the first in the industry to develop a portable reader!”
Black Version
RDR/611/111
S610s Card Reader with PIN (125kHz HID Proximity)
RDR/611/114
S610s Multi Technology Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/611/115
S610s Card Reader with PIN (Mifare CSN) Smartcard
RDR/611/117
S610s Card Reader with PIN (DESFire) Smartcard
RDR/611/618
S610s Card Reader with PIN (iClass SE) Smartcard
RDR/611/119
S610s Card Reader with PIN (No Read Tech) supports 2 wiegand readers
S3040 Portable Reader
The S3040 is a lightweight and rugged hand-held card
reading device for use with the AC2000 access control
and security management system.
The S3040 can be used in a wide range of scenarios
where mobility is paramount. For example, it can be used
by a security guard either in a patrolling mode within
predefined zones, or at fixed temporary locations where
there is no power, to verify that a cardholder is authorised
to be at that location and to record their presence.
Other scenarios include construction sites, bus and train
stations, airside/landside boundaries, and random checks
within large commercial sites.
S610 Exit Reader
Grey Version
RDR/612/101
S610 Exit Card Reader with PIN (125kHz HID Proximity)
RDR/612/104
S610 Exit Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/612/105
S610 Exit Card Reader with PIN (Mifare CSN) Smartcard
RDR/612/107
S610 Exit Card Reader with PIN (DESFire)
RDR/612/608
S610 Exit Card Reader with PIN (iClass SE)
RDR/612/109
S610 Exit Card Reader with PIN (No Read Tech) - supports 2 wiegand readers
anywhere, even if mains power is
unavailable
ƒƒEncrypted Storage of up to 200,000
cardholders on-board
ƒƒDual credential authentication
through card swipe and visual
confirmation of cardholder
photograph
ƒƒMustering, Occupancy, Roaming
and Random Check functionality
lightweight at just over 550g
ƒƒHigh-res 3.5” TFT LCD
RDR/612/111
S610 Exit Card Reader with PIN (125kHz HID Proximity)
RDR/304/001
S3040 Portable Card Reader (125kHz HID Proximity)
RDR/612/114
S610 Exit Card Reader with PIN (125kHz Proximity & Mifare CSN)
RDR/304/005
S3040 Portable Card Reader (13.56MHz MiFare/DESFire CSN)
RDR/612/115
S610 Exit Card Reader with PIN (Mifare CSN) Smartcard
RDR/304/008
S3040 Portable Card Reader (iClass SE)
RDR/612/117
S610 Exit Card Reader with PIN (DESFire)
RDR/612/618
S610 Exit Card Reader with PIN (iClass SE)
RDR/612/119
S610 Exit Card Reader with PIN (No Read Tech) - supports 2 wiegand readers
38
ƒƒAuthenticate cardholder details
ƒƒIP68 rated rugged design and
Product Codes
Black Version
Key Features
QuadraClear® sunlight readable
display
ƒƒLifeSupport™ hot swappable
batteries
39
CEM Hardware
CEM Hardware
Power over Ethernet Plus (PoE+) Access Control
CEM Validation Readers
CEM produces a range of card readers which
can be connected to an AC2000 workstation to
validate cards and biometrics onto the system.
Power over Ethernet Plus (PoE+) is an innovative technology which allows devices to
receive power and communications via a single CAT 5e/6 cable. CEM currently offers
two complete PoE+ solutions to accommodate both CEM readers and third party
readers.
Industry First…
DIU 230 (PoE+ Door Interface Unit)
CEM offers an innovative Power over Ethernet
Plus (PoE+) solution. Using the CEM DIU 230
(Door Interface Unit) within the AC2000 system
architecture offers substantial project cost
savings. DIU 230 utilises PoE+ connectivity,
which delivers up to 2 amps at the doorpowering all door furniture and two heavy
duty maglocks via a single CAT 5e/6 network
cable. As power can be provided to the door
via the same Ethernet cable which provides
communications, this has the benefit of
eliminating the need for an external local mains
power supply at the door-reducing significantly
installation costs. The DIU 230 requires the
use of a central Midspan Injector between the
server and the door. (See price list for
Midspan options.)
S610 Validation Readers
RDR/280/608
S610 Validation Reader (iClass SE)
RDR/280/105
S610 Validation Reader (Mifare CSN/CEM DESFire)
RDR/280/109
S610 Validation Reader (No Head)
S610f Validation Reader Options - to add biometric record to the AC2000 System
RDR/615/201
S610f Fingerprint Validation Reader (125 kHz Proximity)
RDR/615/205
S610f Fingerprint Validation Reader (Mifare CSN/CEM DESFire)
RDR/615/608
S610f Fingerprint Validation Reader (iClass SE)
40
Key Features
ƒƒIndustry’s first PoE+ door controller
ƒƒSimplifies installation-No mains or
power supply unit required at the
door. CEM Ethernet readers, heavy
duty maglocks and door furniture
can all be controlled from one PoE+
device (located up to 90m away)
ƒƒCan be installed by IT network
installers without the expense of an
electrician or electrical contractor
ƒƒWhere local power is not readily
available, the DIU 230 can offer
significant cost savings
Product Codes
DIU/700/230
DIU 230 PoE + (Board only)
DIU/700/231
DIU 230 PoE + (with enclosure)
41
Power over Ethernet Plus (PoE+) Access Control
CEM Lift Control
eDCM 330 - PoE+ Two Door Controller
The eDCM 330 offers the benefit of PoE+ technology combined with the flexibility
of using third party readers. The eDCM 330 eliminates the need for an external local
mains power supply at the door. For further details, please see the Controller section.
The CEM lift control solution allows seamless control and monitoring of access
between elevator floors.
S9032 Lift Controller
At the heart of the CEM lift control solution is the S9032 Lift Controller. The S9032
controller is used in conjunction with CEM’s range of lift interface units and can control
up to 128 floors.
Product Codes
DAC/390/L32
S9032 Lift Controller
Each lift controller supports up to 2 lifts and depending on how many floors need
controlled, customers can choose from a range of lift control interfaces (LCI’s)
including; Type 2 Interface-up to 16 floors, Type 3 interface-up to 32 floors,
Type 4 interface-up to 64 floors or Type 5-controlling up to 128 floors.
Lift Control Interface
Used in conjunction with the S9032, the
AC2000 Lift Control Interface (LCI) allows
seamless control and monitoring of access
between elevator floors. An LCI unit directly
connects to a lift floor selection panel. The
LCI unit outputs activate buttons on the lift
floor selection panel according to the access
permissions of the card holder. LCI inputs then
record which button was pressed.
Product Codes
42
IOC/000/008
Lift Control Interface Type 2 (up to 16 floors)
IOC/000/009
Lift Control Interface Type 3 (up to 32 floors)
IOC/000/010
Lift Control Interface Type 4 (up to 64 floors)
NCN/100/203
Lift Control Interface Type 5 (up to 128 floors)
43
Auxiliary
Ethernet Communications Module (ECM)
The ECM (Ethernet Communication Module)
is a serial to Ethernet converter that enables
CEM serial communication devices (such as
the S610s reader range and the sDCM 300), to
connect to the AC2000 central system via an
Ethernet LAN. A chain of up to 16 RS485 CEM devices can be connected to a single
ECM (up to a maximum distance of 1.2 KM). This provides a cost effective means
of connecting groups of serial readers to the AC2000 system from a single Ethernet
point.
DIU 200/DIU 210 (Door Interface Units)
Benefits
ƒƒEnables serial devices to be used on
an AC2000 Ethernet system
ƒƒCustomers can use a Hybrid system
with Ethernet readers and serial
readers where serial is required to
meet distance requirements
Product Codes
ECM/200/000
The DIU 200 and DIU 210 door interface units
are designed to provide power to a door lock,
as well as local power to a CEM reader. It has
onboard inputs which can be used to monitor
conditions such as a fire alarm or activated
break-glass condition.
The DIU 210 is provided in a steel enclosure
complete with power supply backplane and an
output for an additional door holder, where as
the DIU 200 is supplied as a board only version.
ECM Ethernet Communications Module - includes board, box & PSU
Product Codes
DCM 300 I/O Modules
The CEM DCM 300 Input/Output Module
provides a flexible means to monitor and control
a wide array of external equipment. Like the
standard DCM 300, the DCM 300 I/O Module
is available in Ethernet and Serial options. The
DCM 300 I/O features eight analogue inputs
and four outputs that are used to give spare
inputs/outputs on the access control system.
The eDCM 300 I/O Module can connect directly
to the AC2000 Server via the IP network while
the sDCM 300 I/O Module connects to the
9032/9064 controller.
Benefits
DIU/700/200
DIU 200 (Compact Board Only DIU module)
DIU/700/210
DIU 210 Full DIU incl Enclosure/PSU (Does not include backup batteries)
Key Features
ƒƒImproved door security-Controls
and monitors door locks and
furniture, as well as intelligent CEM
card readers
ƒƒAdditional anti-tamper protection at
the door
ƒƒBattery back-up for emergency
power to the door
ƒƒDirect interfaces to CEM card
readers, electric door locks, fire
alarm systems, break glass units,
exit push button and inputs from
alarm devices
ƒƒControl external equipment such
as intruder panels, PIR detectors,
heating controls etc
ƒƒInput to Output mapping allows
functionality such as proximity
sensors being used to turn on lights;
break glass switches, sounders and
releasing door locks
1. DIU210 Unit Enclosure with PSU
and Tamper Switch
6. Door Holder
2. Reader
8. Lock Sense
3. Sounder
9. Door Position sensor
4. Break Glass Unit Secure side
10.Fire alarm system
7. Door Lock (12V or 24V)
5. Rex/Secure side push button or
Exit Reader
Product Codes
IOC/300/101
eDCM 300 Ethernet Input Module (Incl. 12v Power Supply & Enclosure)
IOC/300/006
eDCM 300 Ethernet Input Module (Board Only)
IOC/310/101
sDCM 300 Serial Input Module (Incl. 12v Power Supply & Enclosure)
IOC/310/006
sDCM 300 Serial Input Module (Board Only)
EIOC (Ethernet Input Output Controller)
SMS Server
The SMS Server empowers CEM AC2000
products with the ability to send SMS text
messages in the event of an alarm. The readyto-use solution simply plugs into the Ethernet
network and connects to the wireless network
via an integrated quad-band GSM modem. This
allows quick and easy communication of alarm
events to designated mobile cell phones.
The Ethernet Input Output Controller (EIOC)
is an addition to the Ethernet suite of devices
for use on the AC2000 system. Connecting to
the nearest network point the EIOC provides a
flexible means to monitor and control an array
of equipment. The EIOC features 16 analogue
inputs and 8 digital outputs. The 16 analogue
inputs can be cross-mapped to one or many of
the outputs upon activation/deactivation.
Benefits
ƒƒSends SMS text messages in the
event of an alarm
ƒƒPlug and Play
ƒƒWeb based configuration and
management
Key Features
ƒƒEthernet connectivity to host
ƒƒBackup battery connection for
emergency power (optional)
ƒƒDedicated tamper input
ƒƒ16 Inputs (2 or 4 state)
ƒƒ8 Outputs (4 Relay NO/NC and 4
Open Collector)
ƒƒIntegrated quad-band GSM modem
ƒƒDesktop or Panel mounting
Product Codes
IOC/010/000
Product Codes
CEQ/060/100
44
EIOC (Complete with PSU Enclosure)
SMS Server
45
Auxiliary
Notes
46
Notes
47
Notes
For further information on CEM products & solutions,
please contact your CEM representative or visit www.cemsys.com
48
For more information on the products
featured here or on any other
CEM Systems products please call:
+44 (0)28 9045 6767
E-mail us at [email protected] or
contact your CEM Account Representative
Please visit us at www.cemsys.com
CEM/B/057.7
© 2015 Tyco Security Products 04/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement