HP SATA Hard Drives
QuickSpecs
HP SATA Hard Drives
Overview
HP SATA drives are designed for the reliability and larger capacities demanded by today's entry server and external storage
environments. The SATA portfolio is categorized into two categories: Entry (ETY) and Midline (MDL) drives. HP SATA Entry drives are the
lowest unit-cost solution for entry-level servers. HP SATA Midline drives are designed with economical reliability and performance for
external storage, backups and archival applications. These high capacity drives provide the lowest $/GB to our customers. Both Entry
and Midline SATA drives provide the best price advantage for non-mission critical applications with low workloads of 40% or less. HP
SATA drives are available in both Large Form Factor (LFF) (3.5-inch) and Small Form Factor (SFF) (2.5-inch) and ship with a standard one
year warranty, 1,0,0.
All HP hard drives pass a rigorous qualification process, which ensures that every HP drive is proven to perform in your HP ProLiant
server. Before final certification, all HP SATA hard drives are optimized for compatibility and functionality, including support of SMART
and HP Systems Insight Manager.
*S.M.A.R.T.: Self Monitoring Analysis and Reporting Technology, first developed at HP, detects possible hard disk failure before it
occurs, allowing replacement of the component before failure occurs.
NOTE: For additional information regarding the different features of SATA Entry drives please visit the SATA hard drive website:
www.hp.com/go/SATA
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 1
QuickSpecs
HP SATA Hard Drives
Overview
What's New
Removing discontinued drives
Models
NOTE: SATA Drive Write Cache is disabled by default to minimize the risk of data loss in case of power loss. For
information on how to enable Drive Write Cache on SATA drives via supported controllers and HBAs and what
precautions should be followed please visit: www.hp.com/go/SATA
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
HP 6G SATA Hard Drives
NOTE: These drives support Gen8 servers only.
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
655710-B21
655708-B21
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives
693687-B21
628061-B21
658079-B21
657750-B21
658071-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP SATA Hot Plug Hard Drives
NOTE: These drives support G6 and G7 servers only.
628065-B21
659339-B21
659337-B21
659341-B21
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
625609-B21
507750-B21
HP 4TB 3G SATA 7.2k rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP SATA Non-Hot Plug Hard Drives
NOTE: These drives support G6 and G7 servers only.
694374-B21
628059-B21
507632-B21
454146-B21
458928-B21
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
DA - 13021 Worldwide — Version 26 — December 9, 2013
628063-B21
Page 2
QuickSpecs
HP SATA Hard Drives
Overview
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive
HP SATA Quick Release Hard Drives
507774-B21
507772-B21
458941-B21
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives
NOTE: These drives are supported by the SL Gen8 servers and Moonshot server.
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) Quick Release Midline 1yr Warranty Hard Drive
6G SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives
NOTE: These drives are supported by the SL Gen8 servers.
632080-B21
632078-B21
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) Quick Release Midline 1yr Warranty Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Quick Release Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Quick Release Midline 1yr Warranty Hard Drive
697954-B21
647274-B21
672621-B21
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 3
QuickSpecs
HP SATA Hard Drives
Standard Features
Drive Quality
Today's entry-level servers and external storage solutions are seeing an increase in maximum storage
capacity and demand for increased levels of drive quality. In the often-changing entry-level server and
storage environment, storage has become a critical component of the information system, significantly
defining both the systems reliability. This is why HP drives undergo an intense qualification process that
eliminates firmware and O/S incompatibilities. All drives are proven to perform in the HP ProLiant and
Modular Smart Array (MSA) storage systems for which they were designed.
Performance
Only those drives whose quality is suitable for an entry-level, external storage enclosures and server
environments are selected through the HP qualification process. All our drives are proven to be reliable in
the ProLiant server and MSA storage environment.
Native Command Queuing Native Command Queuing (NCQ) is a technology designed to increase performance of SATA hard disk
drives by allowing the individual hard disk to internally optimize the order in which received read and write
commands are executed. This can reduce the amount of unnecessary going back-and-forth on the drive's
heads, resulting in increased performance for workloads where multiple simultaneous read/write requests
are outstanding, most often occurring in server or storage-type applications. Without NCQ the drive has to
process and complete one command at a time. For NCQ to be enabled, it must be supported and turned on
in the controller and in the hard drive itself.
NOTE: Please reference the HP Smart Array Controller website for NCQ enabled controllers at:
http://www.hp.com/products/smartarray.
Please see SATA hard drive Technical Specifications section for specific capacities supported with NCQ.
Integration
Many issues customers have with third party Serial-ATA drives are integration related issues. When buying
from another supplier, there is no guarantee that a drive has been correctly set for proper operation with
ProLiant entry-level servers or MSA enclosures. These incompatibilities can create problems in
configuration, can rob your system of performance, or at their worst, can result in data corruption. HP hard
drives are specifically designed and tested for flawless operation in your HP equipment. The integration of
hard drives in HP systems means that cables, controllers, and firmware are right for your ProLiant entry
level server or MSA enclosures.
Pre-Failure Alert
When used in conjunction with a SMART Array Controller and Systems Insight Manager, the SMART capable
firmware in HP hard drives enables extensive fault prediction capabilities. If potential problems develop in
one of the drives, the Smart Array Controller, Systems Insight Manager and/or SMART hard disk drive lets
you know in advance so you can have the drive replaced, before it fails, under warranty.
NOTE: All drives are protected by a Pre-Failure Alert when used with a HP Smart Array controller and
Systems Insight Manager, allowing hard drives to be replaced before failure under warranty. In addition,
all drives are covered by a 1 or 3 year limited on-site warranty, regardless of the warranty period of the
system in which they are installed. However, the drive warranty is automatically uplifted when used in a
server or MSA for which a care pack is purchased. Please see the below HP Care Pack Information section
for additional services.
NOTE: SATA hard drives have a 1 year limited warranty regardless of the warranty period for the system in
which they are installed.
Server and Storage
Support
Please see the following URL for the latest list of supported servers and enclosures:
http://www.hp.com/servers/hdd-documentation
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 4
QuickSpecs
HP SATA Hard Drives
Service and Support
Service and Support
HP Technology Services
HP Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability, and avoid downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
HP Foundation Care services deliver scalable support-packages for HP industry-standard servers and
software. You can choose the type and level of service that is most suitable for your business needs. New
to this portfolio is HP Collaborative Support. If you are running business critical environments, HP offers
Proactive Care or Critical Advantage. These services help you deliver high levels of application availability
through proactive service management and advanced technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, HP can work with you to tailor a service solution for your unique
support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive on
site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
OR
3-Year HP 24x7 4 hour Response, HP Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and
basic software problem diagnosis, fault isolation, and resolution if available to HP. If the problem is with
HP HW, the representative will arrive on site any time and day of the year to begin hardware maintenance
service within 4 hours of the service request being logged. In case, the issue is with HP or supported thirdparty software product and cannot be resolved by applying known fixes, HP will contact the third-party
vendor and create a problem incident on your behalf.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 5
QuickSpecs
HP SATA Hard Drives
Service and Support
Related HP Care Pack Services to enhance your HP product experience
Related Services
3-Year HP 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue
end to end until resolved, delivering a single point of contact for you
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-2140ENW.pdf
OR
3-Year HP 6-hour Onsite Call-to-Repair, HP Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to
return the hardware in operating condition within 6 hours of the initial service request to the HP Global
Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP. In
case, the issue is with HP or supported third-party software product and cannot be resolved by applying
known fixes, HP will contact the third-party vendor and create a problem incident on your behalf.
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Insight Remote Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,
HP Care Pack or HP contractual support agreement.
*HP' Support Center Mobile App is subject to local availability
Parts and materials
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements. Supplies and consumable parts will not be provided as part of this service;
standard warranty terms and conditions apply. Parts and components that have exceeded their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 6
QuickSpecs
HP SATA Hard Drives
Service and Support
Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms
and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that
have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded
maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating
manual or the technical data sheet are not eligible for the defective media retention service feature option.
For more information
To learn more on services for HP ESSN Options, please contact your HP sales representative or HP
Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or
www.hp.com/services/bladesystem
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 7
QuickSpecs
HP SATA Hard Drives
Technical Specifications
6G SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives (Gen8 only)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version 5.0 or later is required for the following
controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HP Smart Array controllers
do not support boot volumes exceeding 2.2 TB.Other controllers are not supported.
HP 1TB 6G SATA 7.2K rpm
655710-B21
Capacity
1,000,204MB
SFF (2.5-inch) SC Midline
Height
0.62 in (15.6 mm)
1yr Warranty Hard Drive
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.7 ms
Average
<8.5 ms
Full-Stroke
16.96 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
1,953,525,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 8
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 500GB 6G SATA 7.2K
rpm SFF (2.5-inch) SC
Midline 1yr Warranty Hard
Drive
655708-B21
Capacity
500,107MB
Height
0.62 in (15.6 mm )
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.7ms
Average
<8.5ms
Full-Stroke
16.96ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
6G SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives (Gen8 only)
HP 4TB 6G SATA 7.2k rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
693687-B21
Capacity
4,000,787MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
0.8 ms
Average
8.5 ms
Full-Stroke
16.2 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
7,814,037,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 9
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 3TB 6G SATA 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
628061-B21
Capacity
3,000,592,982,016
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 2TB 6G SATA 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
658079-B21
Single Track
.5 ms
Average
8.2 ms
Full-Stroke
16.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
5,860,533,168
50° to 95° F (10° to 35° C)
Capacity
2,000,398MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.5 ms
Average
<8.5ms
Full-Stroke
16.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
3,907,029,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 10
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 1TB 6G SATA 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
657750-B21
Capacity
1,000,204MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 500GB 6G SATA 7.2K
rpm LFF (3.5-inch) SC
Midline 1yr Warranty Hard
Drive
658071-B21
Single Track
.5 ms
Average
<8.5 ms
Full-Stroke
16.5 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
1,953,525,168
50° to 95° F (10° to 35° C)
Capacity
500,107MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.5ms
Average
<8.5ms
Full-Stroke
16.3ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 11
QuickSpecs
HP SATA Hard Drives
Technical Specifications
6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives (Gen8 only)
HP 3TB 6G SATA 7.2K rpm
LFF (3.5-inch) Non-hot
Plug Midline 1yr Warranty
Hard Drive
628065-B21
Capacity
3,000,592,982,016
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Single Track
.5 ms
Average
8.2 ms
Full-Stroke
16.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
5,860,533,168
50° to 95° F (10° to 35° C)
Operating Temperature
(system inlet air
temperature)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB.
Other controllers are not supported
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 12
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 2TB 6G SATA 7.2K rpm
LFF (3.5-inch) Non-hot
Plug Midline 1yr Warranty
Hard Drive
659339-B21
Capacity
2,000,398MB
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 1TB 6G SATA 7.2K rpm
LFF (3.5-inch) Non-hot
Plug Midline 1yr Warranty
Hard Drive
659337-B21
Single Track
.5 ms
Average
<8.5ms
Full-Stroke
16.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
3,907,029,168
50° to 95° F (10° to 35° C)
Capacity
1,000,204MB
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.5ms
Average
<8.5 ms
Full-Stroke
16.3ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 13
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 500GB 6G SATA 7.2K
rpm LFF (3.5-inch) Nonhot Plug Midline 1yr
Warranty Hard Drive
659341-B21
Capacity
500,107MB
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.5 ms
Average
<8.5 ms
Full-Stroke
17.55 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
1,953,525,168
50° to 95° F (10° to 35° C)
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
NOTE: These drives are not supported by Gen8 servers.
HP 1TB 3G SATA 7.2K rpm
SFF
(2.5-inch) Hot plug
Midline 1yr Warranty Hard
Drive
625609-B21
Capacity
1,000,204MB
Height
0.63 in (16.0 mm)
Width
3.00 in (72.2 mm)
Depth
5.38 in (136.6 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.7ms
Average
<8.5ms
Full-Stroke
16.96ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
1,953,525,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 14
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 500GB 3G SATA 7.2K
rpm SFF (2.5-inch) Midline
1yr Warranty Hard Drive
507750-B21
Capacity
500,107MB
Height
0.63 in (16.0 mm)
Width
3.00 in (72.2 mm)
Depth
5.38 in (136.6 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.5 ms
Average
8.2 ms
Full-Stroke
17.55 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
NOTE: These drives are not supported by Gen8 servers. To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version
5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HP Smart Array controllers
do not support boot volumes exceeding 2.2 TB. Other controllers are not supported.
HP 4TB 3G SATA 7.2k rpm
694374-B21
Capacity
4,000,787MB
LFF (3.5-inch) Midline 1yr
Height
1.04 in (26.4 mm)
Warranty Hard Drive
Width
4.36 in (110.7 mm)
Depth
7.25 in (184.2 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Single Track
Average
Full-Stroke
Rotational Speed
DA - 13021 Worldwide — Version 26 — December 9, 2013
0.8 ms
8.5 ms
16.2 ms
7,200 rpm
Page 15
QuickSpecs
HP SATA Hard Drives
Technical Specifications
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 3TB 3G SATA 7.2K rpm
LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
628059-B21
Bytes/Sector
512
Logical Blocks
7,814,037,168
50° to 95° F (10° to 35° C)
Capacity
3,000,592,982,016
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.25 in (184.2 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 2TB 3G SATA 7.2K rpm
LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
507632-B21
Single Track
0.5 ms
Average
<8.5 ms
Full-Stroke
16.9 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
3,907,029,168
50° to 95° F (10° to 35° C)
Capacity
2,000,398MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.25 in (184.2 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
0.5 ms
Average
<8.5 ms
Full-Stroke
16.9 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
3,907,029,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 16
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 500GB 3G SATA 7.2K
rpm LFF (3.5-inch) Midline
1yr Warranty Hard Drive
458928-B21
Capacity
500,107MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.25 in (184.2 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
2.0 ms
Average
<8.5 ms
Full-Stroke
21.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
NOTE: These drives are not supported by Gen8 servers.
HP 3TB 3G SATA 7.2K rpm
LFF (3.5-inch) Non-hot
plug Midline 1yr Warranty
Hard Drive
628063-B21
Capacity
3,000,592,982,016
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Single Track
0.5 ms
Average
<8.1 ms
Full-Stroke
15.5 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
5,860,533,168
50° to 95° F (10° to 35° C)
Operating Temperature
(system inlet air
temperature)
NOTE: To support HP hard drives exceeding 2.2 TB on pre Gen8 servers, HP
Smart Array Firmware version 5.0 or later is required for the following
controllers:
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 17
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB.
Other controllers are not supported
NOTE: Gen8 servers require Gen8 specific Smart Array Controllers
HP 2TB 3G SATA 7.2K rpm
LFF (3.5-inch) Non-hot
Plug Midline 1yr Warranty
Hard Drive
507774-B21
Capacity
2,000,398MB
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
0.5 ms
Average
<8.5 ms
Full-Stroke
16.9 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
3,907,029,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 18
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 1TB 3G SATA 7.2K rpm
LFF (3.5-inch) Non-hot
Plug Midline 1yr Warranty
Hard Drive
507772-B21
Capacity
1,000,204MB
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 500GB 3G SATA 7.2K
rpm LFF (3.5-inch) Nonhot Plug Midline 1yr
Warranty Hard Drive
458941-B21
Single Track
2.0 ms
Average
<8.5 ms
Full-Stroke
25.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
1,953,525,168
50° to 95° F (10° to 35° C)
Capacity
500,107MB
Height
1.028 in (26.1 mm)
Width
4.00 in (101.6 mm)
Depth
5.75 in (146.0 mm)
Interface
Serial ATA
Transfer Rate
3Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
2.0 ms
Average
<8.5 ms
Full-Stroke
21.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 19
QuickSpecs
HP SATA Hard Drives
Technical Specifications
6G SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives (Gen8 only)
HP 1TB 6G SATA 7.2K rpm
SFF (2.5-inch) Quick
Release Midline 1yr
Warranty Hard Drive
632080-B21
Capacity
1,000,204MB
Height
0.74 in (18.8mm)
Width
2.91 in (73.9 mm)
Depth
3.95 in (100.2 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 500GB 6G SATA 7.2K
rpm SFF (2.5-inch) Quick
Release Midline 1yr
Warranty Hard Drive
632078-B21
Single Track
.7ms
Average
<8.5ms
Full-Stroke
16.96ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
Capacity
500,107MB
Height
0.74 in (18.8mm)
Width
2.91 in (73.9 mm)
Depth
3.95 in (100.2 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.7ms
Average
<8.5ms
Full-Stroke
16.96ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 20
QuickSpecs
HP SATA Hard Drives
Technical Specifications
6G SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives (Gen8 only)
HP 4TB 6G SATA 7.2k rpm
LFF (3.5-inch) Quick
Release Midline 1yr
Warranty Hard Drive
697954-B21
Capacity
4,000,787MB
Height
1.16 in (29.6 mm)
Width
4.16 in (105.6 mm)
Depth
5.79 in (147.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
HP 3TB 6G SATA 7.2K rpm
LFF (3.5-inch) Quick
Release Midline 1yr
Warranty Hard Drive
647274-B21
Single Track
0.8ms
Average
8.5ms
Full-Stroke
16.2ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
7,814,037,168
50° to 95° F (10° to 35° C)
Capacity
3,000,592,982,016
Height
1.16 in (29.6 mm)
Width
4.16 in (105.6 mm)
Depth
5.79 in (147.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Single Track
.5ms
Average
<8.5ms
Full-Stroke
16.3ms
Rotational Speed
7200
Bytes/Sector
512
Logical Blocks
976,773,168
50° to 95° F (10° to 35° C)
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 21
QuickSpecs
HP SATA Hard Drives
Technical Specifications
HP 1TB 6G SATA
7.2K rpm LFF (3.5-inch)
Quick Release Midline 1yr
Warranty Hard
Drive
672621-B21
Capacity
1,000,204MB
Height
1.16 in (29.6 mm)
Width
4.16 in (105.6 mm)
Depth
5.79 in (147.0 mm)
Interface
Serial ATA
Transfer Rate
6Gb/s
(Maximum)
Native Command Queuing Supported
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(system inlet air
temperature)
Environment-friendly
Products and Approach
Single Track
.5 ms
Average
<8.5 ms
Full-Stroke
16.5 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
1,953,525,168
50° to 95° F (10° to 35° C)
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered
trademark or trademark of Red Hat, Inc., in the U.S. and/or other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13021 Worldwide — Version 26 — December 9, 2013
Page 22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement