advertisement
Wireless Telephone Quick Reference Guide
Mitel SX50/200/2000
Superset 420
The diagram above shows how the Superset 420 keypad corresponds to the Wireless Telephone.
The Wireless Telephone user will press LINE then 1-9 to access Line Select Keys 1-9. Press LINE then * to access the Superkey functions.
FCN followed by * on the Wireless Telephone is equivalent to using the left softkey, FCN 0 equals the middle softkey, and FCN # equals the right softkey.
Function Key
Strokes
FCN + 1
FCN + 2
FCN + 3
FCN + 4
FCN + 7
FCN + 8
FCN + 9
FCN + *
FCN + 0
FCN + #
FCN + *
LINE + 0
Default
Settings
MUTE
XFER/CONF
REDIAL
MSG
Left Softkey
Center Softkey
Right Softkey
Superkey
CANCEL
Fill In Your
Feature Settings
SpectraLink 6020 Wireless Telephone
On/Off Press and hold END. Two chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this at the end of each call.
Answer call Press START. Line indicator comes on steady when the call is answered.
Answer
second call
Press HOLD to put your current call on hold, or END to hang up.
Press LINE + the digit that is flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit for the line on hold, which will be flashing.
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook allows you to scroll through menu screens.
User Options Press the CFG softkey while on hook to change handset settings.
For information on Battery Pack charging and setting user preferences, see the
Wireless Telephone User Guide.
1725-36154-001_D Superset is a trademark of Mitel Networks Corporation [email protected] • 800.775.5330
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project