Delta 28-306 Band Saw Instruction manual

Below you will find brief information for Band Saw 28-306. This 14" Metal/Wood Cutting Band Saw offers multiple speeds (40, 60, 85, 115, 160, 220, 335, and 3000 SFM) for versatile cutting of various materials. It features adjustable blade tension, tracking, and guides for precise cuts and safety. The tilting table and table insert allow for diverse cutting angles and workpiece support. Safety features are emphasized throughout the manual.

PDF Download
Document
Delta 28-306 Band Saw Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Multiple speeds for metal and wood
  • Adjustable blade tension and tracking
  • Tilting table for angled cuts
  • Durable construction

Frequently asked questions

Disconnect the machine from the power source. Use the knob on the back of the upper wheel slide bracket to raise or lower the wheel until the red fiber washer aligns with the proper graduation for the blade size.

Disconnect the machine. Rotate the wheels slowly by hand and observe the blade's movement. Adjust the thumb screw to move the blade to the center of the tire. Never track while running.

Disconnect the machine. Pull the shifter knob out for wood cutting (3000 SFM) or push it in for metal cutting (other speeds). Refer to the manual for detailed belt and pulley arrangements.
Preparing document for printing…
0%