Power Acoustik OV2 420, OV2 600, OV2 800, OV2 1250, OV2 1800, OV2 2200, OV2 2600, OV4 840, OV4 1200, OV4 1600 Audio Amplifier Owner's Manual

Power Acoustik OV2-420/OV2-600/OV2-800/OV2-1250/OV2-1800 amplifiers provide high-performance sound reinforcement for mobile audio equipment. Their versatility enables compatibility with optional equalizers, crossovers, and other audio processors. Multi-mode bridging capabilities allow for various speaker configurations. Features include full MOSFET power supply, PWM circuitry, selectable crossover, three-way protection circuit, 2-ohm stable stereo, tri-mode capability, variable bass boost, and more.

PDF Download
Document
Power Acoustik OV2-420, OV2-600, OV2-800 Owner's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Full Mosfet Power Supply
  • PWM Circuitry
  • Full Selectable Crossover Hi/Full/Low
  • Three Way Protection Circuit
  • 2 Ohm Stable Stereo
  • Tri-Mode Capable
  • Super Cool Blue Led
  • Chrome Top Plate Panel
  • Variable Low Pass 40Hz-250Hz/30Hz-500Hz
  • Variable Hi Pass 40Hz-250Hz/50-500Hz

Frequently asked questions

4/8 GAUGE (or thicker if planning for additional Amplifiers) wire is recommended for both the power and ground wires.

To avoid unwanted ignition noise caused by ground loops, it is essential that the Amplifier be grounded to a clean, bare, metal surface of the vehicles chassis.

GROUND WIRE SHOULD NOT BE EXTENDED MORE THAN 3 FT. (1 METER).
Preparing document for printing…
0%