Bash Shell User Manual
إعلان
إعلان
Bash Reference Manual
Reference Documentation for Bash
Edition 2.5, for Bash Version 2.05.
Mar 2001
Chet Ramey, Case Western Reserve University
Brian Fox, Free Software Foundation
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation.
Chapter 1: Introduction
1 Introduction
1.1 What is Bash?
Bash is the shell, or command language interpreter, for the gnu operating system. The name is an acronym for the ‘Bourne-Again SHell’, a pun on Stephen Bourne, the author of the direct ancestor of the current Unix shell /bin/sh, which appeared in the Seventh
Edition Bell Labs Research version of Unix.
Bash is largely compatible with sh and incorporates useful features from the Korn shell ksh and the C shell csh. It is intended to be a conformant implementation of the ieee posix
Shell and Tools specification (ieee Working Group 1003.2).
It offers functional improvements over sh for both interactive and programming use.
While the gnu operating system provides other shells, including a version of csh, Bash is the default shell. Like other gnu software, Bash is quite portable. It currently runs on nearly every version of Unix and a few other operating systems
− independently-supported ports exist for ms-dos, os/2, Windows 95/98, and Windows nt.
1.2 What is a shell?
At its base, a shell is simply a macro processor that executes commands. A Unix shell is both a command interpreter, which provides the user interface to the rich set of gnu utilities, and a programming language, allowing these utilitites to be combined. Files containing commands can be created, and become commands themselves. These new commands have the same status as system commands in directories such as ‘/bin’, allowing users or groups to establish custom environments.
A shell allows execution of gnu commands, both synchronously and asynchronously.
The shell waits for synchronous commands to complete before accepting more input; asynchronous commands continue to execute in parallel with the shell while it reads and executes additional commands. The redirection constructs permit fine-grained control of the input and output of those commands. Moreover, the shell allows control over the contents of commands’ environments. Shells may be used interactively or non-interactively: they accept input typed from the keyboard or from a file.
Shells also provide a small set of built-in commands (builtins) implementing functionality impossible or inconvenient to obtain via separate utilities. For example, cd, break, continue, and exec) cannot be implemented outside of the shell because they directly manipulate the shell itself. The history, getopts, kill, or pwd builtins, among others, could be implemented in separate utilities, but they are more convenient to use as builtin commands. All of the shell builtins are described in subsequent sections.
While executing commands is essential, most of the power (and complexity) of shells is due to their embedded programming languages. Like any high-level language, the shell provides variables, flow control constructs, quoting, and functions.
Shells offer features geared specifically for interactive use rather than to augment the programming language. These interactive features include job control, command line editing, history and aliases. Each of these features is described in this manual.
1
2 Bash Reference Manual
Chapter 2: Definitions
2 Definitions
These definitions are used throughout the remainder of this manual.
POSIX
A family of open system standards based on Unix. Bash is concerned with posix
1003.2, the Shell and Tools Standard.
blank
A space or tab character.
builtin
A command that is implemented internally by the shell itself, rather than by an executable program somewhere in the file system.
control operator
A word that performs a control function. It is a newline or one of the following:
‘||’, ‘&&’, ‘&’, ‘;’, ‘;;’, ‘|’, ‘(’, or ‘)’.
exit status
The value returned by a command to its caller.
field
A unit of text that is the result of one of the shell expansions. After expansion, when executing a command, the resulting fields are used as the command name and arguments.
filename
A string of characters used to identify a file.
job
A set of processes comprising a pipeline, and any processes descended from it, that are all in the same process group.
job control
A mechanism by which users can selectively stop (suspend) and restart (resume) execution of processes.
metacharacter
A character that, when unquoted, separates words. A metacharacter is a blank or one of the following characters: ‘|’, ‘&’, ‘;’, ‘(’, ‘)’, ‘<’, or ‘>’.
name
A word consisting solely of letters, numbers, and underscores, and beginning with a letter or underscore. Names are used as shell variable and function names.
Also referred to as an identifier.
operator
A control operator or a redirection operator. See
Section 3.6 [Redirections], page 22
, for a list of redirection operators.
process group
A collection of related processes each having the same process group id.
process group ID
A unique identifer that represents a process group during its lifetime.
reserved word
A word that has a special meaning to the shell. Most reserved words introduce shell flow control constructs, such as for and while.
return status
A synonym for exit status.
3
4 Bash Reference Manual signal
A mechanism by which a process may be notified by the kernel of an event occurring in the system.
special builtin
A shell builtin command that has been classified as special by the posix 1003.2
standard.
token word
A sequence of characters considered a single unit by the shell. It is either a word or an operator.
A token that is not an operator.
Chapter 3: Basic Shell Features
3 Basic Shell Features
Bash is an acronym for ‘Bourne-Again SHell’. The Bourne shell is the traditional Unix shell originally written by Stephen Bourne. All of the Bourne shell builtin commands are available in Bash, and the rules for evaluation and quoting are taken from the posix 1003.2
specification for the ‘standard’ Unix shell.
This chapter briefly summarizes the shell’s ‘building blocks’: commands, control structures, shell functions, shell parameters, shell expansions, redirections, which are a way to direct input and output from and to named files, and how the shell executes commands.
3.1 Shell Syntax
When the shell reads input, it proceeds through a sequence of operations. If the input indicates the beginning of a comment, the shell ignores the comment symbol (‘#’), and the rest of that line.
Otherwise, roughly speaking, the shell reads its input and divides the input into words and operators, employing the quoting rules to select which meanings to assign various words and characters.
The shell then parses these tokens into commands and other constructs, removes the special meaning of certain words or characters, expands others, redirects input and output as needed, executes the specified command, waits for the command’s exit status, and makes that exit status available for further inspection or processing.
3.1.1 Shell Operation
The following is a brief description of the shell’s operation when it reads and executes a command. Basically, the shell does the following:
1. Reads its input from a file (see
Section 3.8 [Shell Scripts], page 28
), from a string supplied as an argument to the ‘-c’ invocation option (see
Section 6.1 [Invoking Bash], page 59 ), or from the user’s terminal.
2. Breaks the input into words and operators, obeying the quoting rules described in
Section 3.1.2 [Quoting], page 6 . These tokens are separated by metacharacters. Alias
expansion is performed by this step (see
Section 6.6 [Aliases], page 67
).
3. Parses the tokens into simple and compound commands (see
Section 3.2 [Shell Commands], page 7 ).
4. Performs the various shell expansions (see
Section 3.5 [Shell Expansions], page 15
), breaking the expanded tokens into lists of filenames (see
Section 3.5.8 [Filename Expansion], page 20
) and commands and arguments.
5. Performs any necessary redirections (see
Section 3.6 [Redirections], page 22 ) and re-
moves the redirection operators and their operands from the argument list.
6. Executes the command (see
Section 3.7 [Executing Commands], page 25
).
7. Optionally waits for the command to complete and collects its exit status (see
Section 3.7.5 [Exit Status], page 27
).
5
6 Bash Reference Manual
3.1.2 Quoting
Quoting is used to remove the special meaning of certain characters or words to the shell.
Quoting can be used to disable special treatment for special characters, to prevent reserved words from being recognized as such, and to prevent parameter expansion.
Each of the shell metacharacters (see
Chapter 2 [Definitions], page 3
) has special meaning to the shell and must be quoted if it is to represent itself. When the command history expansion facilities are being used, the history expansion character, usually ‘!’, must be quoted to prevent history expansion. See
Section 9.1 [Bash History Facilities], page 103
, for more details concerning history expansion. There are three quoting mechanisms: the escape character, single quotes, and double quotes.
3.1.2.1 Escape Character
A non-quoted backslash ‘\’ is the Bash escape character. It preserves the literal value of the next character that follows, with the exception of newline. If a \newline pair appears, and the backslash itself is not quoted, the \newline is treated as a line continuation (that is, it is removed from the input stream and effectively ignored).
3.1.2.2 Single Quotes
Enclosing characters in single quotes (‘’’) preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.
3.1.2.3 Double Quotes
Enclosing characters in double quotes (‘"’) preserves the literal value of all characters within the quotes, with the exception of ‘$’, ‘‘’, and ‘\’. The characters ‘$’ and ‘‘’ retain their special meaning within double quotes (see
Section 3.5 [Shell Expansions], page 15
).
The backslash retains its special meaning only when followed by one of the following characters: ‘$’, ‘‘’, ‘"’, ‘\’, or newline. Within double quotes, backslashes that are followed by one of these characters are removed. Backslashes preceding characters without a special meaning are left unmodified. A double quote may be quoted within double quotes by preceding it with a backslash.
The special parameters ‘*’ and ‘@’ have special meaning when in double quotes (see
Section 3.5.3 [Shell Parameter Expansion], page 17
).
3.1.2.4 ANSI-C Quoting
Words of the form $’string’ are treated specially. The word expands to string, with backslash-escaped characters replaced as specified by the ANSI C standard. Backslash escape sequences, if present, are decoded as follows:
\a
\b
\e alert (bell) backspace an escape character (not ANSI C)
Chapter 3: Basic Shell Features 7
\f
\n
\r
\t
\v
\\
\’
\nnn
\xnnn form feed newline carriage return horizontal tab vertical tab backslash single quote the character whose ASCII code is the octal value nnn (one to three digits) the character whose ASCII code is the hexadecimal value nnn (one to three digits)
The expanded result is single-quoted, as if the dollar sign had not been present.
3.1.2.5 Locale-Specific Translation
A double-quoted string preceded by a dollar sign (‘$’) will cause the string to be translated according to the current locale. If the current locale is C or POSIX, the dollar sign is ignored. If the string is translated and replaced, the replacement is double-quoted.
Some systems use the message catalog selected by the LC_MESSAGES shell variable. Others create the name of the message catalog from the value of the TEXTDOMAIN shell variable, possibly adding a suffix of ‘.mo’. If you use the TEXTDOMAIN variable, you may need to set the TEXTDOMAINDIR variable to the location of the message catalog files.
3.1.3 Comments
In a non-interactive shell, or an interactive shell in which the interactive_comments option to the shopt builtin is enabled (see
Section 4.2 [Bash Builtins], page 36
), a word beginning with ‘#’ causes that word and all remaining characters on that line to be ignored.
An interactive shell without the interactive_comments option enabled does not allow comments. The interactive_comments option is on by default in interactive shells. See
Section 6.3 [Interactive Shells], page 62 , for a description of what makes a shell interactive.
3.2 Shell Commands
A simple shell command such as echo a b c consists of the command itself followed by arguments, separated by spaces.
More complex shell commands are composed of simple commands arranged together in a variety of ways: in a pipeline in which the output of one command becomes the input of a second, in a loop or conditional construct, or in some other grouping.
8 Bash Reference Manual
3.2.1 Simple Commands
A simple command is the kind of command encountered most often. It’s just a sequence of words separated by blanks, terminated by one of the shell’s control operators (see
Chapter 2 [Definitions], page 3
). The first word generally specifies a command to be executed, with the rest of the words being that command’s arguments.
The return status (see
Section 3.7.5 [Exit Status], page 27
) of a simple command is its exit status as provided by the posix 1003.1 waitpid function, or 128+n if the command was terminated by signal n.
3.2.2 Pipelines
A pipeline is a sequence of simple commands separated by ‘|’.
The format for a pipeline is
[time [-p]] [!] command1 [| command2 ...]
The output of each command in the pipeline is connected to the input of the next command.
That is, each command reads the previous command’s output.
The reserved word time causes timing statistics to be printed for the pipeline once it finishes. The statistics currently consist of elapsed (wall-clock) time and user and system time consumed by the command’s execution. The ‘-p’ option changes the output format to that specified by posix. The TIMEFORMAT variable may be set to a format string that specifies how the timing information should be displayed. See
Section 5.2 [Bash Variables], page 51
, for a description of the available formats. The use of time as a reserved word permits the timing of shell builtins, shell functions, and pipelines. An external time command cannot time these easily.
If the pipeline is not executed asynchronously (see
), the shell waits for all commands in the pipeline to complete.
Each command in a pipeline is executed in its own subshell (see
Execution Environment], page 26 ). The exit status of a pipeline is the exit status of the
last command in the pipeline. If the reserved word ‘!’ precedes the pipeline, the exit status is the logical negation of the exit status of the last command.
3.2.3 Lists of Commands
A list is a sequence of one or more pipelines separated by one of the operators ‘;’, ‘&’,
‘&&’, or ‘||’, and optionally terminated by one of ‘;’, ‘&’, or a newline.
Of these list operators, ‘&&’ and ‘||’ have equal precedence, followed by ‘;’ and ‘&’, which have equal precedence.
If a command is terminated by the control operator ‘&’, the shell executes the command asynchronously in a subshell. This is known as executing the command in the background.
The shell does not wait for the command to finish, and the return status is 0 (true). When job control is not active (see
Chapter 7 [Job Control], page 75
), the standard input for asynchronous commands, in the absence of any explicit redirections, is redirected from
/dev/null.
Commands separated by a ‘;’ are executed sequentially; the shell waits for each command to terminate in turn. The return status is the exit status of the last command executed.
Chapter 3: Basic Shell Features 9
The control operators ‘&&’ and ‘||’ denote and lists and or lists, respectively. An and list has the form command1 && command2 command2 is executed if, and only if, command1 returns an exit status of zero.
An or list has the form command1 || command2 command2 is executed if, and only if, command1 returns a non-zero exit status.
The return status of and and or lists is the exit status of the last command executed in the list.
3.2.4 Looping Constructs
Bash supports the following looping constructs.
Note that wherever a ‘;’ appears in the description of a command’s syntax, it may be replaced with one or more newlines.
until
The syntax of the until command is: until test-commands; do consequent-commands; done
Execute consequent-commands as long as test-commands has an exit status which is not zero. The return status is the exit status of the last command executed in consequent-commands, or zero if none was executed.
while for
The syntax of the while command is: while test-commands; do consequent-commands; done
Execute consequent-commands as long as test-commands has an exit status of zero. The return status is the exit status of the last command executed in consequent-commands, or zero if none was executed.
The syntax of the for command is: for name [in words ...]; do commands; done
Expand words, and execute commands once for each member in the resultant list, with name bound to the current member. If ‘in words’ is not present, the for command executes the commands once for each positional parameter that is set, as if ‘in "$@"’ had been specified (see
Section 3.4.2 [Special Parameters], page 14
). The return status is the exit status of the last command that executes.
If there are no items in the expansion of words, no commands are executed, and the return status is zero.
An alternate form of the for command is also supported: for (( expr1 ; expr2 ; expr3 )) ; do commands ; done
First, the arithmetic expression expr1 is evaluated according to the rules described below (see
Section 6.5 [Shell Arithmetic], page 66
). The arithmetic expression expr2 is then evaluated repeatedly until it evaluates to zero. Each time expr2 evaluates to a non-zero value, commands are executed and the arithmetic expression expr3 is evaluated. If any expression is omitted, it behaves as if it evaluates to 1. The return value is the exit status of the last command in list that is executed, or false if any of the expressions is invalid.
10 Bash Reference Manual
The break and continue builtins (see
Section 4.1 [Bourne Shell Builtins], page 31 ) may
be used to control loop execution.
3.2.5 Conditional Constructs
if case
The syntax of the if command is: if test-commands; then consequent-commands;
[elif more-test-commands; then more-consequents;]
[else alternate-consequents;] fi
The test-commands list is executed, and if its return status is zero, the consequent-commands list is executed. If test-commands returns a non-zero status, each elif list is executed in turn, and if its exit status is zero, the corresponding more-consequents is executed and the command completes. If
‘else alternate-consequents’ is present, and the final command in the final if or elif clause has a non-zero exit status, then alternate-consequents is executed. The return status is the exit status of the last command executed, or zero if no condition tested true.
The syntax of the case command is: case word in [ [(] pattern [| pattern]...) command-list ;;]... esac case will selectively execute the command-list corresponding to the first pattern that matches word. The ‘|’ is used to separate multiple patterns, and the ‘)’ operator terminates a pattern list. A list of patterns and an associated command-list is known as a clause. Each clause must be terminated with ‘;;’.
The word undergoes tilde expansion, parameter expansion, command substitution, arithmetic expansion, and quote removal before matching is attempted.
Each pattern undergoes tilde expansion, parameter expansion, command substitution, and arithmetic expansion.
There may be an arbitrary number of case clauses, each terminated by a ‘;;’.
The first pattern that matches determines the command-list that is executed.
Here is an example using case in a script that could be used to describe one interesting feature of an animal: echo -n "Enter the name of an animal: " read ANIMAL echo -n "The $ANIMAL has " case $ANIMAL in horse | dog | cat) echo -n "four";; man | kangaroo ) echo -n "two";;
*) echo -n "an unknown number of";; esac echo " legs."
The return status is zero if no pattern is matched. Otherwise, the return status is the exit status of the command-list executed.
Chapter 3: Basic Shell Features 11 select
The select construct allows the easy generation of menus. It has almost the same syntax as the for command: select name [in words ...]; do commands; done
The list of words following in is expanded, generating a list of items. The set of expanded words is printed on the standard error output stream, each preceded by a number. If the ‘in words’ is omitted, the positional parameters are printed, as if ‘in "$@"’ had been specifed. The PS3 prompt is then displayed and a line is read from the standard input. If the line consists of a number corresponding to one of the displayed words, then the value of name is set to that word. If the line is empty, the words and prompt are displayed again. If EOF is read, the select command completes. Any other value read causes name to be set to null. The line read is saved in the variable REPLY.
The commands are executed after each selection until a break or return command is executed, at which point the select command completes.
Here is an example that allows the user to pick a filename from the current directory, and displays the name and index of the file selected.
select fname in *; do echo you picked $fname \($REPLY\) break; done
((...))
(( expression ))
The arithmetic expression is evaluated according to the rules described below
(see
Section 6.5 [Shell Arithmetic], page 66
). If the value of the expression is non-zero, the return status is 0; otherwise the return status is 1. This is exactly equivalent to let "expression"
See
Section 4.2 [Bash Builtins], page 36
, for a full description of the let builtin.
[[...]]
[[ expression ]]
Return a status of 0 or 1 depending on the evaluation of the conditional expression expression. Expressions are composed of the primaries described below in
Section 6.4 [Bash Conditional Expressions], page 64
. Word splitting and filename expansion are not performed on the words between the ‘[[’ and ‘]]’; tilde expansion, parameter and variable expansion, arithmetic expansion, command substitution, process substitution, and quote removal are performed.
When the ‘==’ and ‘!=’ operators are used, the string to the right of the operator is considered a pattern and matched according to the rules described below in
Section 3.5.8.1 [Pattern Matching], page 21
. The return value is 0 if the string matches or does not match the pattern, respectively, and 1 otherwise. Any part of the pattern may be quoted to force it to be matched as a string.
12 Bash Reference Manual
Expressions may be combined using the following operators, listed in decreasing order of precedence:
( expression )
Returns the value of expression. This may be used to override the normal precedence of operators.
! expression
True if expression is false.
expression1 && expression2
True if both expression1 and expression2 are true.
expression1 || expression2
True if either expression1 or expression2 is true.
The && and || commands do not execute expression2 if the value of expression1 is sufficient to determine the return value of the entire conditional expression.
3.2.6 Grouping Commands
Bash provides two ways to group a list of commands to be executed as a unit. When commands are grouped, redirections may be applied to the entire command list. For example, the output of all the commands in the list may be redirected to a single stream.
()
( list )
Placing a list of commands between parentheses causes a subshell to be created, and each of the commands in list to be executed in that subshell. Since the list is executed in a subshell, variable assignments do not remain in effect after the subshell completes.
{}
{ list; }
Placing a list of commands between curly braces causes the list to be executed in the current shell context. No subshell is created. The semicolon (or newline) following list is required.
In addition to the creation of a subshell, there is a subtle difference between these two constructs due to historical reasons. The braces are reserved words, so they must be separated from the list by blanks. The parentheses are operators, and are recognized as separate tokens by the shell even if they are not separated from the list by whitespace.
The exit status of both of these constructs is the exit status of list.
3.3 Shell Functions
Shell functions are a way to group commands for later execution using a single name for the group. They are executed just like a "regular" command. When the name of a shell function is used as a simple command name, the list of commands associated with that function name is executed. Shell functions are executed in the current shell context; no new process is created to interpret them.
Functions are declared using this syntax:
Chapter 3: Basic Shell Features 13
[ function ] name () { command-list; }
This defines a shell function named name. The reserved word function is optional. If the function reserved word is supplied, the parentheses are optional. The body of the function is the command-list between { and }. This list is executed whenever name is specified as the name of a command. The exit status of a function is the exit status of the last command executed in the body.
Note that for historical reasons, the curly braces that surround the body of the function must be separated from the body by blanks or newlines. This is because the braces are reserved words and are only recognized as such when they are separated by whitespace.
Also, the command-list must be terminated with a semicolon or a newline.
When a function is executed, the arguments to the function become the positional parameters during its execution (see
Section 3.4.1 [Positional Parameters], page 13 ). The
special parameter ‘#’ that expands to the number of positional parameters is updated to reflect the change. Positional parameter 0 is unchanged. The FUNCNAME variable is set to the name of the function while the function is executing.
If the builtin command return is executed in a function, the function completes and execution resumes with the next command after the function call. When a function completes, the values of the positional parameters and the special parameter ‘#’ are restored to the values they had prior to the function’s execution. If a numeric argument is given to return, that is the function’s return status; otherwise the functions’s return status is the exit status of the last command executed before the return.
Variables local to the function may be declared with the local builtin. These variables are visible only to the function and the commands it invokes.
Functions may be recursive. No limit is placed on the number of recursive calls.
3.4 Shell Parameters
A parameter is an entity that stores values. It can be a name, a number, or one of the special characters listed below. For the shell’s purposes, a variable is a parameter denoted by a name.
A parameter is set if it has been assigned a value. The null string is a valid value. Once a variable is set, it may be unset only by using the unset builtin command.
A variable may be assigned to by a statement of the form name=[value]
If value is not given, the variable is assigned the null string. All values undergo tilde expansion, parameter and variable expansion, command substitution, arithmetic expansion, and quote removal (detailed below). If the variable has its integer attribute set (see the description of the declare builtin in
Section 4.2 [Bash Builtins], page 36
), then value is subject to arithmetic expansion even if the $((...)) expansion is not used (see
[Arithmetic Expansion], page 19
). Word splitting is not performed, with the exception of
"$@" as explained below. Filename expansion is not performed.
3.4.1 Positional Parameters
A positional parameter is a parameter denoted by one or more digits, other than the single digit 0. Positional parameters are assigned from the shell’s arguments when it is
14 Bash Reference Manual invoked, and may be reassigned using the set builtin command. Positional parameter N may be referenced as ${N}, or as $N when N consists of a single digit. Positional parameters may not be assigned to with assignment statements. The set and shift builtins are used to set and unset them (see
Chapter 4 [Shell Builtin Commands], page 31
). The positional parameters are temporarily replaced when a shell function is executed (see
).
When a positional parameter consisting of more than a single digit is expanded, it must be enclosed in braces.
3.4.2 Special Parameters
The shell treats several parameters specially. These parameters may only be referenced; assignment to them is not allowed.
*
Expands to the positional parameters, starting from one. When the expansion occurs within double quotes, it expands to a single word with the value of each parameter separated by the first character of the IFS special variable. That is,
"$*" is equivalent to "$1c$2c...", where c is the first character of the value of the IFS variable. If IFS is unset, the parameters are separated by spaces. If
IFS is null, the parameters are joined without intervening separators.
@
#
Expands to the positional parameters, starting from one. When the expansion occurs within double quotes, each parameter expands to a separate word.
That is, "$@" is equivalent to "$1" "$2" .... When there are no positional parameters, "$@" and $@ expand to nothing (i.e., they are removed).
Expands to the number of positional parameters in decimal.
?
-
$
!
0
_
Expands to the exit status of the most recently executed foreground pipeline.
(A hyphen.) Expands to the current option flags as specified upon invocation, by the set builtin command, or those set by the shell itself (such as the ‘-i’ option).
Expands to the process id of the shell. In a () subshell, it expands to the process id of the invoking shell, not the subshell.
Expands to the process id of the most recently executed background (asynchronous) command.
Expands to the name of the shell or shell script. This is set at shell initialization.
If Bash is invoked with a file of commands (see
Section 3.8 [Shell Scripts], page 28
), $0 is set to the name of that file. If Bash is started with the ‘-c’ option (see
Section 6.1 [Invoking Bash], page 59
), then $0 is set to the first argument after the string to be executed, if one is present. Otherwise, it is set to the filename used to invoke Bash, as given by argument zero.
(An underscore.) At shell startup, set to the absolute filename of the shell or shell script being executed as passed in the argument list. Subsequently, expands to the last argument to the previous command, after expansion. Also
Chapter 3: Basic Shell Features 15 set to the full pathname of each command executed and placed in the environment exported to that command. When checking mail, this parameter holds the name of the mail file.
3.5 Shell Expansions
Expansion is performed on the command line after it has been split into tokens. There are seven kinds of expansion performed:
• brace expansion
• tilde expansion
• parameter and variable expansion
• command substitution
• arithmetic expansion
• word splitting
• filename expansion
The order of expansions is: brace expansion, tilde expansion, parameter, variable, and arithmetic expansion and command substitution (done in a left-to-right fashion), word splitting, and filename expansion.
On systems that can support it, there is an additional expansion available: process substitution. This is performed at the same time as parameter, variable, and arithmetic expansion and command substitution.
Only brace expansion, word splitting, and filename expansion can change the number of words of the expansion; other expansions expand a single word to a single word. The only exceptions to this are the expansions of "$@" (see
Section 3.4.2 [Special Parameters], page 14 ) and "${name[@]}" (see
).
After all expansions, quote removal (see
Section 3.5.9 [Quote Removal], page 22
) is performed.
3.5.1 Brace Expansion
Brace expansion is a mechanism by which arbitrary strings may be generated. This mechanism is similar to filename expansion (see
Section 3.5.8 [Filename Expansion], page 20
), but the file names generated need not exist. Patterns to be brace expanded take the form of an optional preamble, followed by a series of comma-separated strings between a pair of braces, followed by an optional postscript. The preamble is prefixed to each string contained within the braces, and the postscript is then appended to each resulting string, expanding left to right.
Brace expansions may be nested. The results of each expanded string are not sorted; left to right order is preserved. For example, bash$ echo a{d,c,b}e ade ace abe
Brace expansion is performed before any other expansions, and any characters special to other expansions are preserved in the result. It is strictly textual. Bash does not apply any syntactic interpretation to the context of the expansion or the text between the braces.
16 Bash Reference Manual
To avoid conflicts with parameter expansion, the string ‘${’ is not considered eligible for brace expansion.
A correctly-formed brace expansion must contain unquoted opening and closing braces, and at least one unquoted comma. Any incorrectly formed brace expansion is left unchanged.
This construct is typically used as shorthand when the common prefix of the strings to be generated is longer than in the above example: mkdir /usr/local/src/bash/{old,new,dist,bugs} or chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
3.5.2 Tilde Expansion
If a word begins with an unquoted tilde character (‘~’), all of the characters up to the first unquoted slash (or all characters, if there is no unquoted slash) are considered a tilde-prefix. If none of the characters in the tilde-prefix are quoted, the characters in the tilde-prefix following the tilde are treated as a possible login name. If this login name is the null string, the tilde is replaced with the value of the HOME shell variable. If HOME is unset, the home directory of the user executing the shell is substituted instead. Otherwise, the tilde-prefix is replaced with the home directory associated with the specified login name.
If the tilde-prefix is ‘~+’, the value of the shell variable PWD replaces the tilde-prefix. If the tilde-prefix is ‘~-’, the value of the shell variable OLDPWD, if it is set, is substituted.
If the characters following the tilde in the tilde-prefix consist of a number N, optionally prefixed by a ‘+’ or a ‘-’, the tilde-prefix is replaced with the corresponding element from the directory stack, as it would be displayed by the dirs builtin invoked with the characters following tilde in the tilde-prefix as an argument (see
Section 6.8 [The Directory Stack], page 68
). If the tilde-prefix, sans the tilde, consists of a number without a leading ‘+’ or
‘-’, ‘+’ is assumed.
If the login name is invalid, or the tilde expansion fails, the word is left unchanged.
Each variable assignment is checked for unquoted tilde-prefixes immediately following a
‘:’ or ‘=’. In these cases, tilde expansion is also performed. Consequently, one may use file names with tildes in assignments to PATH, MAILPATH, and CDPATH, and the shell assigns the expanded value.
The following table shows how Bash treats unquoted tilde-prefixes:
~
The value of $HOME
~/foo
‘$HOME/foo’
~fred/foo
~+/foo
~-/foo
~N
~+N
~-N
The subdirectory foo of the home directory of the user fred
‘$PWD/foo’
‘${OLDPWD-’~-’}/foo’
The string that would be displayed by ‘dirs +N ’
The string that would be displayed by ‘dirs +N ’
The string that would be displayed by ‘dirs -N ’
Chapter 3: Basic Shell Features 17
3.5.3 Shell Parameter Expansion
The ‘$’ character introduces parameter expansion, command substitution, or arithmetic expansion. The parameter name or symbol to be expanded may be enclosed in braces, which are optional but serve to protect the variable to be expanded from characters immediately following it which could be interpreted as part of the name.
When braces are used, the matching ending brace is the first ‘}’ not escaped by a backslash or within a quoted string, and not within an embedded arithmetic expansion, command substitution, or parameter expansion.
The basic form of parameter expansion is ${parameter}. The value of parameter is substituted. The braces are required when parameter is a positional parameter with more than one digit, or when parameter is followed by a character that is not to be interpreted as part of its name.
If the first character of parameter is an exclamation point, a level of variable indirection is introduced. Bash uses the value of the variable formed from the rest of parameter as the name of the variable; this variable is then expanded and that value is used in the rest of the substitution, rather than the value of parameter itself. This is known as indirect expansion. The exception to this is the expansion of ${!prefix*} described below.
In each of the cases below, word is subject to tilde expansion, parameter expansion, command substitution, and arithmetic expansion.
When not performing substring expansion, Bash tests for a parameter that is unset or null; omitting the colon results in a test only for a parameter that is unset. Put another way, if the colon is included, the operator tests for both existence and that the value is not null; if the colon is omitted, the operator tests only for existence.
${parameter:
−word}
If parameter is unset or null, the expansion of word is substituted. Otherwise, the value of parameter is substituted.
${parameter:=word}
If parameter is unset or null, the expansion of word is assigned to parameter.
The value of parameter is then substituted. Positional parameters and special parameters may not be assigned to in this way.
${parameter:?word}
If parameter is null or unset, the expansion of word (or a message to that effect if word is not present) is written to the standard error and the shell, if it is not interactive, exits. Otherwise, the value of parameter is substituted.
${parameter:+word}
If parameter is null or unset, nothing is substituted, otherwise the expansion of word is substituted.
${parameter:offset}
${parameter:offset:length}
Expands to up to length characters of parameter starting at the character specified by offset. If length is omitted, expands to the substring of parameter starting at the character specified by offset. length and offset are arithmetic
18 Bash Reference Manual expressions (see
Section 6.5 [Shell Arithmetic], page 66
). This is referred to as
Substring Expansion.
length must evaluate to a number greater than or equal to zero. If offset evaluates to a number less than zero, the value is used as an offset from the end of the value of parameter. If parameter is ‘@’, the result is length positional parameters beginning at offset. If parameter is an array name indexed by ‘@’ or ‘*’, the result is the length members of the array beginning with ${parameter[offset]}. Substring indexing is zero-based unless the positional parameters are used, in which case the indexing starts at 1.
${!prefix*}
Expands to the names of variables whose names begin with prefix, separated by the first character of the IFS special variable.
${#parameter}
The length in characters of the expanded value of parameter is substituted.
If parameter is ‘*’ or ‘@’, the value substituted is the number of positional parameters. If parameter is an array name subscripted by ‘*’ or ‘@’, the value substituted is the number of elements in the array.
${parameter#word}
${parameter##word}
The word is expanded to produce a pattern just as in filename expansion (see
Section 3.5.8 [Filename Expansion], page 20
). If the pattern matches the beginning of the expanded value of parameter, then the result of the expansion is the expanded value of parameter with the shortest matching pattern (the ‘#’ case) or the longest matching pattern (the ‘##’ case) deleted. If parameter is ‘@’ or ‘*’, the pattern removal operation is applied to each positional parameter in turn, and the expansion is the resultant list. If parameter is an array variable subscripted with ‘@’ or ‘*’, the pattern removal operation is applied to each member of the array in turn, and the expansion is the resultant list.
${parameter%word}
${parameter%%word}
The word is expanded to produce a pattern just as in filename expansion. If the pattern matches a trailing portion of the expanded value of parameter, then the result of the expansion is the value of parameter with the shortest matching pattern (the ‘%’ case) or the longest matching pattern (the ‘%%’ case) deleted. If parameter is ‘@’ or ‘*’, the pattern removal operation is applied to each positional parameter in turn, and the expansion is the resultant list. If parameter is an array variable subscripted with ‘@’ or ‘*’, the pattern removal operation is applied to each member of the array in turn, and the expansion is the resultant list.
${parameter/pattern/string }
${parameter//pattern/string }
The pattern is expanded to produce a pattern just as in filename expansion.
Parameter is expanded and the longest match of pattern against its value is replaced with string. In the first form, only the first match is replaced. The second form causes all matches of pattern to be replaced with string. If pattern
Chapter 3: Basic Shell Features 19 begins with ‘#’, it must match at the beginning of the expanded value of parameter. If pattern begins with ‘%’, it must match at the end of the expanded value of parameter. If string is null, matches of pattern are deleted and the / following pattern may be omitted. If parameter is ‘@’ or ‘*’, the substitution operation is applied to each positional parameter in turn, and the expansion is the resultant list. If parameter is an array variable subscripted with ‘@’ or ‘*’, the substitution operation is applied to each member of the array in turn, and the expansion is the resultant list.
3.5.4 Command Substitution
Command substitution allows the output of a command to replace the command itself.
Command substitution occurs when a command is enclosed as follows:
$(command) or
‘command‘
Bash performs the expansion by executing command and replacing the command substitution with the standard output of the command, with any trailing newlines deleted.
Embedded newlines are not deleted, but they may be removed during word splitting. The command substitution $(cat file) can be replaced by the equivalent but faster $(< file).
When the old-style backquote form of substitution is used, backslash retains its literal meaning except when followed by ‘$’, ‘‘’, or ‘\’. The first backquote not preceded by a backslash terminates the command substitution. When using the $(command) form, all characters between the parentheses make up the command; none are treated specially.
Command substitutions may be nested. To nest when using the backquoted form, escape the inner backquotes with backslashes.
If the substitution appears within double quotes, word splitting and filename expansion are not performed on the results.
3.5.5 Arithmetic Expansion
Arithmetic expansion allows the evaluation of an arithmetic expression and the substitution of the result. The format for arithmetic expansion is:
$(( expression ))
The expression is treated as if it were within double quotes, but a double quote inside the parentheses is not treated specially. All tokens in the expression undergo parameter expansion, command substitution, and quote removal. Arithmetic substitutions may be nested.
The evaluation is performed according to the rules listed below (see
Arithmetic], page 66 ). If the expression is invalid, Bash prints a message indicating failure
to the standard error and no substitution occurs.
3.5.6 Process Substitution
Process substitution is supported on systems that support named pipes (fifos) or the
‘/dev/fd’ method of naming open files. It takes the form of
20 Bash Reference Manual
<(list) or
>(list)
The process list is run with its input or output connected to a fifo or some file in ‘/dev/fd’.
The name of this file is passed as an argument to the current command as the result of the expansion. If the >(list) form is used, writing to the file will provide input for list. If the
<(list) form is used, the file passed as an argument should be read to obtain the output of list. Note that no space may appear between the < or > and the left parenthesis, otherwise the construct would be interpreted as a redirection.
When available, process substitution is performed simultaneously with parameter and variable expansion, command substitution, and arithmetic expansion.
3.5.7 Word Splitting
The shell scans the results of parameter expansion, command substitution, and arithmetic expansion that did not occur within double quotes for word splitting.
The shell treats each character of $IFS as a delimiter, and splits the results of the other expansions into words on these characters. If IFS is unset, or its value is exactly
<space><tab><newline>, the default, then any sequence of IFS characters serves to delimit words. If IFS has a value other than the default, then sequences of the whitespace characters space and tab are ignored at the beginning and end of the word, as long as the whitespace character is in the value of IFS (an IFS whitespace character). Any character in IFS that is not IFS whitespace, along with any adjacent IFS whitespace characters, delimits a field.
A sequence of IFS whitespace characters is also treated as a delimiter. If the value of IFS is null, no word splitting occurs.
Explicit null arguments ("" or ’’) are retained. Unquoted implicit null arguments, resulting from the expansion of parameters that have no values, are removed. If a parameter with no value is expanded within double quotes, a null argument results and is retained.
Note that if no expansion occurs, no splitting is performed.
3.5.8 Filename Expansion
After word splitting, unless the ‘-f’ option has been set (see
appears, then the word is regarded as a pattern, and replaced with an alphabetically sorted list of file names matching the pattern. If no matching file names are found, and the shell option nullglob is disabled, the word is left unchanged. If the nullglob option is set, and no matches are found, the word is removed. If the shell option nocaseglob is enabled, the match is performed without regard to the case of alphabetic characters.
When a pattern is used for filename generation, the character ‘.’ at the start of a filename or immediately following a slash must be matched explicitly, unless the shell option dotglob is set. When matching a file name, the slash character must always be matched explicitly.
In other cases, the ‘.’ character is not treated specially.
See the description of shopt in
Section 4.2 [Bash Builtins], page 36 , for a description of
the nocaseglob, nullglob, and dotglob options.
Chapter 3: Basic Shell Features 21
The GLOBIGNORE shell variable may be used to restrict the set of filenames matching a pattern.
If GLOBIGNORE is set, each matching filename that also matches one of the patterns in GLOBIGNORE is removed from the list of matches. The filenames ‘.’ and ‘..’ are always ignored, even when GLOBIGNORE is set. However, setting GLOBIGNORE has the effect of enabling the dotglob shell option, so all other filenames beginning with a ‘.’ will match.
To get the old behavior of ignoring filenames beginning with a ‘.’, make ‘.*’ one of the patterns in GLOBIGNORE. The dotglob option is disabled when GLOBIGNORE is unset.
3.5.8.1 Pattern Matching
Any character that appears in a pattern, other than the special pattern characters described below, matches itself. The nul character may not occur in a pattern. The special pattern characters must be quoted if they are to be matched literally.
The special pattern characters have the following meanings:
*
Matches any string, including the null string.
?
[...]
Matches any single character.
Matches any one of the enclosed characters. A pair of characters separated by a hyphen denotes a range expression; any character that sorts between those two characters, inclusive, using the current locale’s collating sequence and character set, is matched. If the first character following the ‘[’ is a ‘!’ or a ‘^’ then any character not enclosed is matched. A ‘
−’ may be matched by including it as the first or last character in the set. A ‘]’ may be matched by including it as the first character in the set. The sorting order of characters in range expressions is determined by the current locale and the value of the LC_COLLATE shell variable, if set.
For example, in the default C locale, ‘[a-dx-z]’ is equivalent to ‘[abcdxyz]’.
Many locales sort characters in dictionary order, and in these locales
‘[a-dx-z]’ is typically not equivalent to ‘[abcdxyz]’; it might be equivalent to ‘[aBbCcDdxXyYz]’, for example. To obtain the traditional interpretation of ranges in bracket expressions, you can force the use of the C locale by setting the LC_COLLATE or LC_ALL environment variable to the value ‘C’.
Within ‘[’ and ‘]’, character classes can be specified using the syntax [:class:], where class is one of the following classes defined in the posix 1003.2 standard: alnum alpha ascii blank cntrl digit graph lower print punct space upper xdigit
A character class matches any character belonging to that class.
Within ‘[’ and ‘]’, an equivalence class can be specified using the syntax [=c=], which matches all characters with the same collation weight (as defined by the current locale) as the character c.
Within ‘[’ and ‘]’, the syntax [.symbol.] matches the collating symbol symbol.
If the extglob shell option is enabled using the shopt builtin, several extended pattern matching operators are recognized. In the following description, a pattern-list is a list of one or more patterns separated by a ‘|’. Composite patterns may be formed using one or more of the following sub-patterns:
22 Bash Reference Manual
?(pattern-list)
Matches zero or one occurrence of the given patterns.
*(pattern-list)
Matches zero or more occurrences of the given patterns.
+(pattern-list)
Matches one or more occurrences of the given patterns.
@(pattern-list)
Matches exactly one of the given patterns.
!(pattern-list)
Matches anything except one of the given patterns.
3.5.9 Quote Removal
After the preceding expansions, all unquoted occurrences of the characters ‘\’, ‘’’, and
‘"’ that did not result from one of the above expansions are removed.
3.6 Redirections
Before a command is executed, its input and output may be redirected using a special notation interpreted by the shell. Redirection may also be used to open and close files for the current shell execution environment. The following redirection operators may precede or appear anywhere within a simple command or may follow a command. Redirections are processed in the order they appear, from left to right.
In the following descriptions, if the file descriptor number is omitted, and the first character of the redirection operator is ‘<’, the redirection refers to the standard input (file descriptor 0). If the first character of the redirection operator is ‘>’, the redirection refers to the standard output (file descriptor 1).
The word following the redirection operator in the following descriptions, unless otherwise noted, is subjected to brace expansion, tilde expansion, parameter expansion, command substitution, arithmetic expansion, quote removal, filename expansion, and word splitting.
If it expands to more than one word, Bash reports an error.
Note that the order of redirections is significant. For example, the command ls > dirlist 2>&1 directs both standard output (file descriptor 1) and standard error (file descriptor 2) to the file dirlist, while the command ls 2>&1 > dirlist directs only the standard output to file dirlist, because the standard error was duplicated as standard output before the standard output was redirected to dirlist.
Bash handles several filenames specially when they are used in redirections, as described in the following table:
/dev/fd/fd
If fd is a valid integer, file descriptor fd is duplicated.
Chapter 3: Basic Shell Features 23
/dev/stdin
File descriptor 0 is duplicated.
/dev/stdout
File descriptor 1 is duplicated.
/dev/stderr
File descriptor 2 is duplicated.
/dev/tcp/host/port
If host is a valid hostname or Internet address, and port is an integer port number, Bash attempts to open a TCP connection to the corresponding socket.
/dev/udp/host/port
If host is a valid hostname or Internet address, and port is an integer port number, Bash attempts to open a UDP connection to the corresponding socket.
A failure to open or create a file causes the redirection to fail.
3.6.1 Redirecting Input
Redirection of input causes the file whose name results from the expansion of word to be opened for reading on file descriptor n, or the standard input (file descriptor 0) if n is not specified.
The general format for redirecting input is:
[n]<word
3.6.2 Redirecting Output
Redirection of output causes the file whose name results from the expansion of word to be opened for writing on file descriptor n, or the standard output (file descriptor 1) if n is not specified. If the file does not exist it is created; if it does exist it is truncated to zero size.
The general format for redirecting output is:
[n]>[|]word
If the redirection operator is ‘>’, and the noclobber option to the set builtin has been enabled, the redirection will fail if the file whose name results from the expansion of word exists and is a regular file. If the redirection operator is ‘>|’, or the redirection operator is
‘>’ and the noclobber option is not enabled, the redirection is attempted even if the file named by word exists.
3.6.3 Appending Redirected Output
Redirection of output in this fashion causes the file whose name results from the expansion of word to be opened for appending on file descriptor n, or the standard output (file descriptor 1) if n is not specified. If the file does not exist it is created.
The general format for appending output is:
[n]>>word
24 Bash Reference Manual
3.6.4 Redirecting Standard Output and Standard Error
Bash allows both the standard output (file descriptor 1) and the standard error output
(file descriptor 2) to be redirected to the file whose name is the expansion of word with this construct.
and
There are two formats for redirecting standard output and standard error:
&>word
>&word
Of the two forms, the first is preferred. This is semantically equivalent to
>word 2>&1
3.6.5 Here Documents
This type of redirection instructs the shell to read input from the current source until a line containing only word (with no trailing blanks) is seen. All of the lines read up to that point are then used as the standard input for a command.
The format of here-documents is as follows:
<<[
−]word here-document delimiter
No parameter expansion, command substitution, arithmetic expansion, or filename expansion is performed on word. If any characters in word are quoted, the delimiter is the result of quote removal on word, and the lines in the here-document are not expanded.
If word is unquoted, all lines of the here-document are subjected to parameter expansion, command substitution, and arithmetic expansion. In the latter case, the character sequence
\newline is ignored, and ‘\’ must be used to quote the characters ‘\’, ‘$’, and ‘‘’.
If the redirection operator is ‘<<-’, then all leading tab characters are stripped from input lines and the line containing delimiter. This allows here-documents within shell scripts to be indented in a natural fashion.
3.6.6 Duplicating File Descriptors
The redirection operator
[n]<&word is used to duplicate input file descriptors. If word expands to one or more digits, the file descriptor denoted by n is made to be a copy of that file descriptor. If the digits in word do not specify a file descriptor open for input, a redirection error occurs. If word evaluates to ‘-’, file descriptor n is closed. If n is not specified, the standard input (file descriptor 0) is used.
The operator
[n]>&word is used similarly to duplicate output file descriptors. If n is not specified, the standard output (file descriptor 1) is used. If the digits in word do not specify a file descriptor open for output, a redirection error occurs. As a special case, if n is omitted, and word does
Chapter 3: Basic Shell Features 25 not expand to one or more digits, the standard output and standard error are redirected as described previously.
3.6.7 Opening File Descriptors for Reading and Writing
The redirection operator
[n]<>word causes the file whose name is the expansion of word to be opened for both reading and writing on file descriptor n, or on file descriptor 0 if n is not specified. If the file does not exist, it is created.
3.7 Executing Commands
3.7.1 Simple Command Expansion
When a simple command is executed, the shell performs the following expansions, assignments, and redirections, from left to right.
1. The words that the parser has marked as variable assignments (those preceding the command name) and redirections are saved for later processing.
2. The words that are not variable assignments or redirections are expanded (see
Section 3.5 [Shell Expansions], page 15
). If any words remain after expansion, the first word is taken to be the name of the command and the remaining words are the arguments.
3. Redirections are performed as described above (see
Section 3.6 [Redirections], page 22
).
4. The text after the ‘=’ in each variable assignment undergoes tilde expansion, parameter expansion, command substitution, arithmetic expansion, and quote removal before being assigned to the variable.
If no command name results, the variable assignments affect the current shell environment. Otherwise, the variables are added to the environment of the executed command and do not affect the current shell environment. If any of the assignments attempts to assign a value to a readonly variable, an error occurs, and the command exits with a non-zero status.
If no command name results, redirections are performed, but do not affect the current shell environment. A redirection error causes the command to exit with a non-zero status.
If there is a command name left after expansion, execution proceeds as described below.
Otherwise, the command exits. If one of the expansions contained a command substitution, the exit status of the command is the exit status of the last command substitution performed. If there were no command substitutions, the command exits with a status of zero.
3.7.2 Command Search and Execution
After a command has been split into words, if it results in a simple command and an optional list of arguments, the following actions are taken.
26 Bash Reference Manual
1. If the command name contains no slashes, the shell attempts to locate it. If there exists a shell function by that name, that function is invoked as described in
2. If the name does not match a function, the shell searches for it in the list of shell builtins. If a match is found, that builtin is invoked.
3. If the name is neither a shell function nor a builtin, and contains no slashes, Bash searches each element of $PATH for a directory containing an executable file by that name. Bash uses a hash table to remember the full pathnames of executable files to avoid multiple PATH searches (see the description of hash in
Builtins], page 31 ). A full search of the directories in $PATH is performed only if the
command is not found in the hash table. If the search is unsuccessful, the shell prints an error message and returns an exit status of 127.
4. If the search is successful, or if the command name contains one or more slashes, the shell executes the named program in a separate execution environment. Argument 0 is set to the name given, and the remaining arguments to the command are set to the arguments supplied, if any.
5. If this execution fails because the file is not in executable format, and the file is not a directory, it is assumed to be a shell script and the shell executes it as described in
Section 3.8 [Shell Scripts], page 28 .
6. If the command was not begun asynchronously, the shell waits for the command to complete and collects its exit status.
3.7.3 Command Execution Environment
The shell has an execution environment, which consists of the following:
• open files inherited by the shell at invocation, as modified by redirections supplied to the exec builtin
• the current working directory as set by cd, pushd, or popd, or inherited by the shell at invocation
• the file creation mode mask as set by umask or inherited from the shell’s parent
• current traps set by trap
• shell parameters that are set by variable assignment or with set or inherited from the shell’s parent in the environment
• shell functions defined during execution or inherited from the shell’s parent in the environment
• options enabled at invocation (either by default or with command-line arguments) or by set
• options enabled by shopt
• shell aliases defined with alias (see
Section 6.6 [Aliases], page 67 )
• various process ids, including those of background jobs (see
Section 3.2.3 [Lists], page 8 ), the value of $$, and the value of $PPID
When a simple command other than a builtin or shell function is to be executed, it is invoked in a separate execution environment that consists of the following. Unless otherwise noted, the values are inherited from the shell.
Chapter 3: Basic Shell Features 27
• the shell’s open files, plus any modifications and additions specified by redirections to the command
• the current working directory
• the file creation mode mask
• shell variables marked for export, along with variables exported for the command, passed in the environment (see
Section 3.7.4 [Environment], page 27
)
• traps caught by the shell are reset to the values inherited from the shell’s parent, and traps ignored by the shell are ignored
A command invoked in this separate environment cannot affect the shell’s execution environment.
Command substitution and asynchronous commands are invoked in a subshell environment that is a duplicate of the shell environment, except that traps caught by the shell are reset to the values that the shell inherited from its parent at invocation. Builtin commands that are invoked as part of a pipeline are also executed in a subshell environment. Changes made to the subshell environment cannot affect the shell’s execution environment.
3.7.4 Environment
When a program is invoked it is given an array of strings called the environment. This is a list of name-value pairs, of the form name=value.
Bash provides several ways to manipulate the environment. On invocation, the shell scans its own environment and creates a parameter for each name found, automatically marking it for export to child processes. Executed commands inherit the environment. The export and ‘declare -x’ commands allow parameters and functions to be added to and deleted from the environment. If the value of a parameter in the environment is modified, the new value becomes part of the environment, replacing the old. The environment inherited by any executed command consists of the shell’s initial environment, whose values may be modified in the shell, less any pairs removed by the unset and ‘export -n’ commands, plus any additions via the export and ‘declare -x’ commands.
The environment for any simple command or function may be augmented temporarily by prefixing it with parameter assignments, as described in
Section 3.4 [Shell Parameters], page 13
. These assignment statements affect only the environment seen by that command.
If the ‘-k’ option is set (see
Section 4.3 [The Set Builtin], page 46 ), then all parameter
assignments are placed in the environment for a command, not just those that precede the command name.
When Bash invokes an external command, the variable ‘$_’ is set to the full path name of the command and passed to that command in its environment.
3.7.5 Exit Status
For the shell’s purposes, a command which exits with a zero exit status has succeeded.
A non-zero exit status indicates failure. This seemingly counter-intuitive scheme is used so there is one well-defined way to indicate success and a variety of ways to indicate various failure modes. When a command terminates on a fatal signal whose number is N, Bash uses the value 128+N as the exit status.
28 Bash Reference Manual
If a command is not found, the child process created to execute it returns a status of
127. If a command is found but is not executable, the return status is 126.
If a command fails because of an error during expansion or redirection, the exit status is greater than zero.
The exit status is used by the Bash conditional commands (see
Constructs], page 10 ) and some of the list constructs (see
).
All of the Bash builtins return an exit status of zero if they succeed and a non-zero status on failure, so they may be used by the conditional and list constructs. All builtins return an exit status of 2 to indicate incorrect usage.
3.7.6 Signals
When Bash is interactive, in the absence of any traps, it ignores SIGTERM (so that ‘kill
0’ does not kill an interactive shell), and SIGINT is caught and handled (so that the wait builtin is interruptible). When Bash receives a SIGINT, it breaks out of any executing loops.
In all cases, Bash ignores SIGQUIT. If job control is in effect (see
Chapter 7 [Job Control], page 75 ), Bash ignores SIGTTIN, SIGTTOU, and SIGTSTP.
Commands started by Bash have signal handlers set to the values inherited by the shell from its parent. When job control is not in effect, asynchronous commands ignore
SIGINT and SIGQUIT as well. Commands run as a result of command substitution ignore the keyboard-generated job control signals SIGTTIN, SIGTTOU, and SIGTSTP.
The shell exits by default upon receipt of a SIGHUP. Before exiting, it resends the
SIGHUP to all jobs, running or stopped. Stopped jobs are sent SIGCONT to ensure that they receive the SIGHUP. To prevent the shell from sending the SIGHUP signal to a particular job, it should be removed from the jobs table with the disown builtin (see
Control Builtins], page 76 ) or marked to not receive SIGHUP using disown -h.
If the huponexit shell option has been set with shopt (see
When Bash receives a signal for which a trap has been set while waiting for a command to complete, the trap will not be executed until the command completes. When Bash is waiting for an asynchronous command via the wait builtin, the reception of a signal for which a trap has been set will cause the wait builtin to return immediately with an exit status greater than 128, immediately after which the trap is executed.
3.8 Shell Scripts
A shell script is a text file containing shell commands. When such a file is used as the first non-option argument when invoking Bash, and neither the ‘-c’ nor ‘-s’ option is supplied
(see
Section 6.1 [Invoking Bash], page 59 ), Bash reads and executes commands from the
file, then exits. This mode of operation creates a non-interactive shell. When Bash runs a shell script, it sets the special parameter 0 to the name of the file, rather than the name of the shell, and the positional parameters are set to the remaining arguments, if any are given. If no additional arguments are supplied, the positional parameters are unset.
A shell script may be made executable by using the chmod command to turn on the execute bit. When Bash finds such a file while searching the $PATH for a command, it spawns a subshell to execute it. In other words, executing
Chapter 3: Basic Shell Features 29 filename arguments is equivalent to executing bash filename arguments if filename is an executable shell script. This subshell reinitializes itself, so that the effect is as if a new shell had been invoked to interpret the script, with the exception that the locations of commands remembered by the parent (see the description of hash in
[Bourne Shell Builtins], page 31 ) are retained by the child.
Most versions of Unix make this a part of the operating system’s command execution mechanism. If the first line of a script begins with the two characters ‘#!’, the remainder of the line specifies an interpreter for the program. Thus, you can specify Bash, awk, Perl, or some other interpreter and write the rest of the script file in that language.
The arguments to the interpreter consist of a single optional argument following the interpreter name on the first line of the script file, followed by the name of the script file, followed by the rest of the arguments. Bash will perform this action on operating systems that do not handle it themselves. Note that some older versions of Unix limit the interpreter name and argument to a maximum of 32 characters.
Bash scripts often begin with #! /bin/bash (assuming that Bash has been installed in
‘/bin’), since this ensures that Bash will be used to interpret the script, even if it is executed under another shell.
30 Bash Reference Manual
Chapter 4: Shell Builtin Commands 31
4 Shell Builtin Commands
Builtin commands are contained within the shell itself. When the name of a builtin command is used as the first word of a simple command (see
commands are necessary to implement functionality impossible or inconvenient to obtain with separate utilities.
This section briefly the builtins which Bash inherits from the Bourne Shell, as well as the builtin commands which are unique to or have been extended in Bash.
Several builtin commands are described in other chapters: builtin commands which provide the Bash interface to the job control facilities (see
Section 7.2 [Job Control Builtins], page 76
), the directory stack (see
Section 6.8.1 [Directory Stack Builtins], page 69 ), the
command history (see
Section 9.2 [Bash History Builtins], page 103
), and the programmable completion facilities (see
Section 8.7 [Programmable Completion Builtins], page 99 ).
Many of the builtins have been extended by posix or Bash.
4.1 Bourne Shell Builtins
The following shell builtin commands are inherited from the Bourne Shell. These commands are implemented as specified by the posix 1003.2 standard.
: (a colon)
: [arguments]
Do nothing beyond expanding arguments and performing redirections. The return status is zero.
. (a period)
. filename [arguments]
Read and execute commands from the filename argument in the current shell context. If filename does not contain a slash, the PATH variable is used to find filename. When Bash is not in posix mode, the current directory is searched if filename is not found in $PATH. If any arguments are supplied, they become the positional parameters when filename is executed. Otherwise the positional parameters are unchanged. The return status is the exit status of the last command executed, or zero if no commands are executed. If filename is not found, or cannot be read, the return status is non-zero. This builtin is equivalent to source.
break break [n]
Exit from a for, while, until, or select loop. If n is supplied, the nth enclosing loop is exited. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1.
cd cd [-LP] [directory ]
Change the current working directory to directory. If directory is not given, the value of the HOME shell variable is used. If the shell variable CDPATH exists,
32 Bash Reference Manual continue continue [n]
Resume the next iteration of an enclosing for, while, until, or select loop.
If n is supplied, the execution of the nth enclosing loop is resumed. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1.
eval eval [arguments]
The arguments are concatenated together into a single command, which is then read and executed, and its exit status returned as the exit status of eval. If there are no arguments or only empty arguments, the return status is zero.
exec it is used as a search path. If directory begins with a slash, CDPATH is not used. The ‘-P’ option means to not follow symbolic links; symbolic links are followed by default or with the ‘-L’ option. If directory is ‘-’, it is equivalent to $OLDPWD. The return status is zero if the directory is successfully changed, non-zero otherwise.
exec [-cl] [-a name] [command [arguments]]
If command is supplied, it replaces the shell without creating a new process. If the ‘-l’ option is supplied, the shell places a dash at the beginning of the zeroth arg passed to command. This is what the login program does. The ‘-c’ option causes command to be executed with an empty environment. If ‘-a’ is supplied, the shell passes name as the zeroth argument to command. If no command is specified, redirections may be used to affect the current shell environment. If there are no redirection errors, the return status is zero; otherwise the return status is non-zero.
exit exit [n]
Exit the shell, returning a status of n to the shell’s parent. If n is omitted, the exit status is that of the last command executed. Any trap on EXIT is executed before the shell terminates.
export export [-fn] [-p] [name[=value]]
Mark each name to be passed to child processes in the environment. If the
‘-f’ option is supplied, the names refer to shell functions; otherwise the names refer to shell variables. The ‘-n’ option means to no longer mark each name for export. If no names are supplied, or if the ‘-p’ option is given, a list of exported names is displayed. The ‘-p’ option displays output in a form that may be reused as input. The return status is zero unless an invalid option is supplied, one of the names is not a valid shell variable name, or ‘-f’ is supplied with a name that is not a shell function.
getopts
Chapter 4: Shell Builtin Commands 33 hash pwd getopts optstring name [args] getopts is used by shell scripts to parse positional parameters. optstring contains the option characters to be recognized; if a character is followed by a colon, the option is expected to have an argument, which should be separated from it by white space. The colon (‘:’) and question mark (‘?’) may not be used as option characters. Each time it is invoked, getopts places the next option in the shell variable name, initializing name if it does not exist, and the index of the next argument to be processed into the variable OPTIND. OPTIND is initialized to 1 each time the shell or a shell script is invoked. When an option requires an argument, getopts places that argument into the variable
OPTARG. The shell does not reset OPTIND automatically; it must be manually reset between multiple calls to getopts within the same shell invocation if a new set of parameters is to be used.
When the end of options is encountered, getopts exits with a return value greater than zero. OPTIND is set to the index of the first non-option argument, and name is set to ‘?’.
getopts normally parses the positional parameters, but if more arguments are given in args, getopts parses those instead.
getopts can report errors in two ways. If the first character of optstring is a colon, silent error reporting is used. In normal operation diagnostic messages are printed when invalid options or missing option arguments are encountered.
If the variable OPTERR is set to 0, no error messages will be displayed, even if the first character of optstring is not a colon.
If an invalid option is seen, getopts places ‘?’ into name and, if not silent, prints an error message and unsets OPTARG. If getopts is silent, the option character found is placed in OPTARG and no diagnostic message is printed.
If a required argument is not found, and getopts is not silent, a question mark
(‘?’) is placed in name, OPTARG is unset, and a diagnostic message is printed. If getopts is silent, then a colon (‘:’) is placed in name and OPTARG is set to the option character found.
hash [-r] [-p filename] [name]
Remember the full pathnames of commands specified as name arguments, so they need not be searched for on subsequent invocations. The commands are found by searching through the directories listed in $PATH. The ‘-p’ option inhibits the path search, and filename is used as the location of name. The ‘-r’ option causes the shell to forget all remembered locations. If no arguments are given, information about remembered commands is printed. The return status is zero unless a name is not found or an invalid option is supplied.
pwd [-LP]
Print the absolute pathname of the current working directory. If the ‘-P’ option is supplied, the pathname printed will not contain symbolic links. If the ‘-L’ option is supplied, the pathname printed may contain symbolic links. The
34 Bash Reference Manual return status is zero unless an error is encountered while determining the name of the current directory or an invalid option is supplied.
readonly readonly [-apf] [name] ...
Mark each name as readonly. The values of these names may not be changed by subsequent assignment. If the ‘-f’ option is supplied, each name refers to a shell function. The ‘-a’ option means each name refers to an array variable.
If no name arguments are given, or if the ‘-p’ option is supplied, a list of all readonly names is printed. The ‘-p’ option causes output to be displayed in a format that may be reused as input. The return status is zero unless an invalid option is supplied, one of the name arguments is not a valid shell variable or function name, or the ‘-f’ option is supplied with a name that is not a shell function.
return return [n]
Cause a shell function to exit with the return value n. If n is not supplied, the return value is the exit status of the last command executed in the function.
This may also be used to terminate execution of a script being executed with the
. (or source) builtin, returning either n or the exit status of the last command executed within the script as the exit status of the script. The return status is false if return is used outside a function and not during the execution of a script by . or source.
shift shift [n]
Shift the positional parameters to the left by n. The positional parameters from n+1 . . . $# are renamed to $1 . . . $#-n+1. Parameters represented by the numbers $# to n+1 are unset. n must be a non-negative number less than or equal to $#. If n is zero or greater than $#, the positional parameters are not changed. If n is not supplied, it is assumed to be 1. The return status is zero unless n is greater than $# or less than zero, non-zero otherwise.
test
[
Evaluate a conditional expression expr. Each operator and operand must be a separate argument. Expressions are composed of the primaries described below in
Section 6.4 [Bash Conditional Expressions], page 64
.
When the [ form is used, the last argument to the command must be a ].
Expressions may be combined using the following operators, listed in decreasing order of precedence.
! expr
True if expr is false.
( expr )
Returns the value of expr. This may be used to override the normal precedence of operators.
expr1 -a expr2
True if both expr1 and expr2 are true.
Chapter 4: Shell Builtin Commands 35 times trap expr1 -o expr2
True if either expr1 or expr2 is true.
The test and [ builtins evaluate conditional expressions using a set of rules based on the number of arguments.
0 arguments
The expression is false.
1 argument
The expression is true if and only if the argument is not null.
2 arguments
If the first argument is ‘!’, the expression is true if and only if the second argument is null. If the first argument is one of the unary conditional operators (see
the first argument is not a valid unary operator, the expression is false.
3 arguments
If the second argument is one of the binary conditional operators
(see
Section 6.4 [Bash Conditional Expressions], page 64
), the result of the expression is the result of the binary test using the first and third arguments as operands. If the first argument is ‘!’, the value is the negation of the two-argument test using the second and third arguments. If the first argument is exactly ‘(’ and the third argument is exactly ‘)’, the result is the one-argument test of the second argument. Otherwise, the expression is false. The ‘-a’ and
‘-o’ operators are considered binary operators in this case.
4 arguments
If the first argument is ‘!’, the result is the negation of the threeargument expression composed of the remaining arguments. Otherwise, the expression is parsed and evaluated according to precedence using the rules listed above.
5 or more arguments
The expression is parsed and evaluated according to precedence using the rules listed above.
times
Print out the user and system times used by the shell and its children. The return status is zero.
trap [-lp] [arg ] [sigspec ...]
The commands in arg are to be read and executed when the shell receives signal sigspec. If arg is absent or equal to ‘-’, all specified signals are reset to the values they had when the shell was started. If arg is the null string, then
36 Bash Reference Manual the signal specified by each sigspec is ignored by the shell and commands it invokes. If arg is not present and ‘-p’ has been supplied, the shell displays the trap commands associated with each sigspec. If no arguments are supplied, or only ‘-p’ is given, trap prints the list of commands associated with each signal number in a form that may be reused as shell input. Each sigspec is either a signal name such as SIGINT (with or without the SIG prefix) or a signal number.
If a sigspec is 0 or EXIT, arg is executed when the shell exits. If a sigspec is
DEBUG, the command arg is executed after every simple command. The ‘-l’ option causes the shell to print a list of signal names and their corresponding numbers.
Signals ignored upon entry to the shell cannot be trapped or reset. Trapped signals are reset to their original values in a child process when it is created.
The return status is zero unless a sigspec does not specify a valid signal.
umask umask [-p] [-S] [mode]
Set the shell process’s file creation mask to mode. If mode begins with a digit, it is interpreted as an octal number; if not, it is interpreted as a symbolic mode mask similar to that accepted by the chmod command. If mode is omitted, the current value of the mask is printed. If the ‘-S’ option is supplied without a mode argument, the mask is printed in a symbolic format. If the ‘-p’ option is supplied, and mode is omitted, the output is in a form that may be reused as input. The return status is zero if the mode is successfully changed or if no mode argument is supplied, and non-zero otherwise.
Note that when the mode is interpreted as an octal number, each number of the umask is subtracted from 7. Thus, a umask of 022 results in permissions of 755.
unset unset [-fv] [name]
Each variable or function name is removed. If no options are supplied, or the
‘-v’ option is given, each name refers to a shell variable. If the ‘-f’ option is given, the names refer to shell functions, and the function definition is removed.
Readonly variables and functions may not be unset. The return status is zero unless a name does not exist or is readonly.
4.2 Bash Builtin Commands
This section describes builtin commands which are unique to or have been extended in
Bash. Some of these commands are specified in the posix 1003.2 standard.
alias alias [-p] [name[=value] ...]
Without arguments or with the ‘-p’ option, alias prints the list of aliases on the standard output in a form that allows them to be reused as input. If arguments are supplied, an alias is defined for each name whose value is given.
Chapter 4: Shell Builtin Commands 37 bind
If no value is given, the name and value of the alias is printed. Aliases are described in
Section 6.6 [Aliases], page 67 .
bind [-m keymap] [-lpsvPSV] bind [-m keymap] [-q function] [-u function] [-r keyseq] bind [-m keymap] -f filename bind [-m keymap] -x keyseq:shell-command bind [-m keymap] keyseq:function-name
Display current Readline (see
Chapter 8 [Command Line Editing], page 79
) key and function bindings, or bind a key sequence to a Readline function or macro.
The binding syntax accepted is identical to that of a Readline initialization file
(see
Section 8.3 [Readline Init File], page 82
), but each binding must be passed as a separate argument: e.g., ‘"\C-x\C-r":re-read-init-file’. Options, if supplied, have the following meanings:
-m keymap
-l
-p
-P
-v
-V
-s
-S
Use keymap as the keymap to be affected by the subsequent bindings. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard.
List the names of all Readline functions.
Display Readline function names and bindings in such a way that they can be used as input or in a Readline initialization file.
List current Readline function names and bindings.
Display Readline variable names and values in such a way that they can be used as input or in a Readline initialization file.
List current Readline variable names and values.
Display Readline key sequences bound to macros and the strings they output in such a way that they can be used as input or in a
Readline initialization file.
Display Readline key sequences bound to macros and the strings they output.
-f filename
Read key bindings from filename.
-q function
Query about which keys invoke the named function.
-u function
Unbind all keys bound to the named function.
-r keyseq
Remove any current binding for keyseq.
-x keyseq:shell-command
Cause shell-command to be executed whenever keyseq is entered.
38 Bash Reference Manual
The return status is zero unless an invalid option is supplied or an error occurs.
builtin builtin [shell-builtin [args]]
Run a shell builtin, passing it args, and return its exit status. This is useful when defining a shell function with the same name as a shell builtin, retaining the functionality of the builtin within the function. The return status is nonzero if shell-builtin is not a shell builtin command.
command command [-pVv] command [arguments ...]
Runs command with arguments ignoring any shell function named command.
Only shell builtin commands or commands found by searching the PATH are executed. If there is a shell function named ls, running ‘command ls’ within the function will execute the external command ls instead of calling the function recursively.
The ‘-p’ option means to use a default value for PATH that is guaranteed to find all of the standard utilities. The return status in this case is 127 if command cannot be found or an error occurred, and the exit status of command otherwise.
If either the ‘-V’ or ‘-v’ option is supplied, a description of command is printed.
The ‘-v’ option causes a single word indicating the command or file name used to invoke command to be displayed; the ‘-V’ option produces a more verbose description. In this case, the return status is zero if command is found, and non-zero if not.
declare declare [-afFrxi] [-p] [name[=value]]
Declare variables and give them attributes. If no names are given, then display the values of variables instead.
The ‘-p’ option will display the attributes and values of each name. When ‘-p’ is used, additional options are ignored. The ‘-F’ option inhibits the display of function definitions; only the function name and attributes are printed. ‘-F’ implies ‘-f’. The following options can be used to restrict output to variables with the specified attributes or to give variables attributes:
-a
Each name is an array variable (see
).
-f
Use function names only.
-i
-r
The variable is to be treated as an integer; arithmetic evaluation
(see
Section 6.5 [Shell Arithmetic], page 66 ) is performed when the
variable is assigned a value.
Make names readonly. These names cannot then be assigned values by subsequent assignment statements or unset.
-x
Mark each name for export to subsequent commands via the environment.
Using ‘+’ instead of ‘-’ turns off the attribute instead. When used in a function, declare makes each name local, as with the local command.
Chapter 4: Shell Builtin Commands 39 echo enable
The return status is zero unless an invalid option is encountered, an attempt is made to define a function using ‘-f foo=bar’, an attempt is made to assign a value to a readonly variable, an attempt is made to assign a value to an array variable without using the compound assignment syntax (see
), one of the names is not a valid shell variable name, an attempt is made to turn off readonly status for a readonly variable, an attempt is made to turn off array status for an array variable, or an attempt is made to display a non-existent function with ‘-f’.
echo [-neE] [arg ...]
Output the args, separated by spaces, terminated with a newline. The return status is always 0. If ‘-n’ is specified, the trailing newline is suppressed. If the
‘-e’ option is given, interpretation of the following backslash-escaped characters is enabled. The ‘-E’ option disables the interpretation of these escape characters, even on systems where they are interpreted by default. The xpg_echo shell option may be used to dynamically determine whether or not echo expands these escape characters by default. echo interprets the following escape sequences:
\a
\b
\c
\e
\f
\n
\r
\t
\v
\\ alert (bell) backspace suppress trailing newline escape form feed new line carriage return horizontal tab vertical tab backslash
\nnn
\xnnn the character whose ASCII code is the octal value nnn (one to three digits) the character whose ASCII code is the hexadecimal value nnn (one to three digits) enable [-n] [-p] [-f filename] [-ads] [name ...]
Enable and disable builtin shell commands. Disabling a builtin allows a disk command which has the same name as a shell builtin to be executed without specifying a full pathname, even though the shell normally searches for builtins before disk commands. If ‘-n’ is used, the names become disabled. Otherwise names are enabled.
For example, to use the test binary found via $PATH instead of the shell builtin version, type ‘enable -n test’.
40 Bash Reference Manual help let
If the ‘-p’ option is supplied, or no name arguments appear, a list of shell builtins is printed. With no other arguments, the list consists of all enabled shell builtins. The ‘-a’ option means to list each builtin with an indication of whether or not it is enabled.
The ‘-f’ option means to load the new builtin command name from shared object filename, on systems that support dynamic loading. The ‘-d’ option will delete a builtin loaded with ‘-f’.
If there are no options, a list of the shell builtins is displayed. The ‘-s’ option restricts enable to the posix special builtins. If ‘-s’ is used with ‘-f’, the new builtin becomes a special builtin (see
Section 4.4 [Special Builtins], page 49
).
The return status is zero unless a name is not a shell builtin or there is an error loading a new builtin from a shared object.
help [-s] [pattern]
Display helpful information about builtin commands. If pattern is specified, help gives detailed help on all commands matching pattern, otherwise a list of the builtins is printed. The ‘-s’ option restricts the information displayed to a short usage synopsis. The return status is zero unless no command matches pattern.
let expression [expression]
The let builtin allows arithmetic to be performed on shell variables. Each expression is evaluated according to the rules given below in
.
If the last expression evaluates to 0, let returns 1; otherwise 0 is returned.
local local [option] name[=value]
For each argument, a local variable named name is created, and assigned value.
The option can be any of the options accepted by declare. local can only be used within a function; it makes the variable name have a visible scope restricted to that function and its children. The return status is zero unless local is used outside a function, an invalid name is supplied, or name is a readonly variable.
logout printf logout [n]
Exit a login shell, returning a status of n to the shell’s parent.
printf format [arguments]
Write the formatted arguments to the standard output under the control of the format. The format is a character string which contains three types of objects: plain characters, which are simply copied to standard output, character escape sequences, which are converted and copied to the standard output, and format
Chapter 4: Shell Builtin Commands 41 read specifications, each of which causes printing of the next successive argument.
In addition to the standard printf(1) formats, ‘%b’ causes printf to expand backslash escape sequences in the corresponding argument, and ‘%q’ causes printf to output the corresponding argument in a format that can be reused as shell input.
The format is reused as necessary to consume all of the arguments. If the format requires more arguments than are supplied, the extra format specifications behave as if a zero value or null string, as appropriate, had been supplied. The return value is zero on success, non-zero on failure.
read [-ers] [-a aname] [-p prompt] [-t timeout] [-n nchars] [-d delim] [name ...]
One line is read from the standard input, and the first word is assigned to the first name, the second word to the second name, and so on, with leftover words and their intervening separators assigned to the last name. If there are fewer words read from the standard input than names, the remaining names are assigned empty values. The characters in the value of the IFS variable are used to split the line into words. The backslash character ‘\’ may be used to remove any special meaning for the next character read and for line continuation. If no names are supplied, the line read is assigned to the variable REPLY. The return code is zero, unless end-of-file is encountered or read times out. Options, if supplied, have the following meanings:
-a aname
The words are assigned to sequential indices of the array variable aname, starting at 0. All elements are removed from aname before the assignment. Other name arguments are ignored.
-d delim
The first character of delim is used to terminate the input line, rather than newline.
-e
Readline (see
Chapter 8 [Command Line Editing], page 79 ) is used
to obtain the line.
-n nchars read returns after reading nchars characters rather than waiting for a complete line of input.
-p prompt
Display prompt, without a trailing newline, before attempting to read any input. The prompt is displayed only if input is coming from a terminal.
-r
-s
If this option is given, backslash does not act as an escape character.
The backslash is considered to be part of the line. In particular, a backslash-newline pair may not be used as a line continuation.
Silent mode. If input is coming from a terminal, characters are not echoed.
42 Bash Reference Manual shopt
-t timeout
Cause read to time out and return failure if a complete line of input is not read within timeout seconds. This option has no effect if read is not reading input from the terminal or a pipe.
shopt [-pqsu] [-o] [optname ...]
Toggle the values of variables controlling optional shell behavior.
With no options, or with the ‘-p’ option, a list of all settable options is displayed, with an indication of whether or not each is set. The ‘-p’ option causes output to be displayed in a form that may be reused as input. Other options have the following meanings:
-s
Enable (set) each optname.
-u
Disable (unset) each optname.
-q
-o
Suppresses normal output; the return status indicates whether the optname is set or unset. If multiple optname arguments are given with ‘-q’, the return status is zero if all optnames are enabled; non-zero otherwise.
Restricts the values of optname to be those defined for the ‘-o’ option to the set builtin (see
Section 4.3 [The Set Builtin], page 46
).
If either ‘-s’ or ‘-u’ is used with no optname arguments, the display is limited to those options which are set or unset, respectively.
Unless otherwise noted, the shopt options are disabled (off) by default.
The return status when listing options is zero if all optnames are enabled, nonzero otherwise. When setting or unsetting options, the return status is zero unless an optname is not a valid shell option.
The list of shopt options is: cdable_vars
If this is set, an argument to the cd builtin command that is not a directory is assumed to be the name of a variable whose value is the directory to change to.
cdspell
If set, minor errors in the spelling of a directory component in a cd command will be corrected. The errors checked for are transposed characters, a missing character, and a character too many. If a correction is found, the corrected path is printed, and the command proceeds. This option is only used by interactive shells.
checkhash
If this is set, Bash checks that a command found in the hash table exists before trying to execute it. If a hashed command no longer exists, a normal path search is performed.
checkwinsize
If set, Bash checks the window size after each command and, if necessary, updates the values of LINES and COLUMNS.
Chapter 4: Shell Builtin Commands 43 cmdhist
If set, Bash attempts to save all lines of a multiple-line command in the same history entry. This allows easy re-editing of multi-line commands.
dotglob
If set, Bash includes filenames beginning with a ‘.’ in the results of filename expansion.
execfail
If this is set, a non-interactive shell will not exit if it cannot execute the file specified as an argument to the exec builtin command. An interactive shell does not exit if exec fails.
expand_aliases
If set, aliases are expanded as described below under Aliases,
Section 6.6 [Aliases], page 67 . This option is enabled by default for
interactive shells.
extglob
If set, the extended pattern matching features described above (see
Section 3.5.8.1 [Pattern Matching], page 21 ) are enabled.
histappend
If set, the history list is appended to the file named by the value of the HISTFILE variable when the shell exits, rather than overwriting the file.
histreedit
If set, and Readline is being used, a user is given the opportunity to re-edit a failed history substitution.
histverify
If set, and Readline is being used, the results of history substitution are not immediately passed to the shell parser. Instead, the resulting line is loaded into the Readline editing buffer, allowing further modification.
hostcomplete
If set, and Readline is being used, Bash will attempt to perform hostname completion when a word containing a ‘@’ is being completed (see
Section 8.4.6 [Commands For Completion], page 94
).
This option is enabled by default.
huponexit
If set, Bash will send SIGHUP to all jobs when an interactive login shell exits (see
Section 3.7.6 [Signals], page 28 ).
interactive_comments
Allow a word beginning with ‘#’ to cause that word and all remaining characters on that line to be ignored in an interactive shell.
This option is enabled by default.
lithist
If enabled, and the cmdhist option is enabled, multi-line commands are saved to the history with embedded newlines rather than using semicolon separators where possible.
44 Bash Reference Manual source mailwarn
If set, and a file that Bash is checking for mail has been accessed since the last time it was checked, the message "The mail in mailfile has been read" is displayed.
no_empty_cmd_completion
If set, and Readline is being used, Bash will not attempt to search the PATH for possible completions when completion is attempted on an empty line.
nocaseglob
If set, Bash matches filenames in a case-insensitive fashion when performing filename expansion.
nullglob
If set, Bash allows filename patterns which match no files to expand to a null string, rather than themselves.
progcomp
If set, the programmable completion facilities (see
Section 8.6 [Programmable Completion], page 98
) are enabled. This option is enabled by default.
promptvars
If set, prompt strings undergo variable and parameter expansion after being expanded (see
Section 6.9 [Printing a Prompt], page 70
).
This option is enabled by default.
restricted_shell
The shell sets this option if it is started in restricted mode (see
Section 6.10 [The Restricted Shell], page 71 ). The value may not
be changed. This is not reset when the startup files are executed, allowing the startup files to discover whether or not a shell is restricted.
shift_verbose
If this is set, the shift builtin prints an error message when the shift count exceeds the number of positional parameters.
sourcepath
If set, the source builtin uses the value of PATH to find the directory containing the file supplied as an argument. This option is enabled by default.
xpg_echo
If set, the echo builtin expands backslash-escape sequences by default.
The return status when listing options is zero if all optnames are enabled, nonzero otherwise. When setting or unsetting options, the return status is zero unless an optname is not a valid shell option.
source filename
A synonym for . (see
Section 4.1 [Bourne Shell Builtins], page 31
).
type
Chapter 4: Shell Builtin Commands 45 typeset typeset [-afFrxi] [-p] [name[=value]]
The typeset command is supplied for compatibility with the Korn shell; however, it has been deprecated in favor of the declare builtin command.
ulimit type [-atp] [name ...]
For each name, indicate how it would be interpreted if used as a command name.
If the ‘-t’ option is used, type prints a single word which is one of ‘alias’,
‘function’, ‘builtin’, ‘file’ or ‘keyword’, if name is an alias, shell function, shell builtin, disk file, or shell reserved word, respectively. If the name is not found, then nothing is printed, and type returns a failure status.
If the ‘-p’ option is used, type either returns the name of the disk file that would be executed, or nothing if ‘-t’ would not return ‘file’.
If the ‘-a’ option is used, type returns all of the places that contain an executable named file. This includes aliases and functions, if and only if the ‘-p’ option is not also used.
The return status is zero if any of the names are found, non-zero if none are found.
ulimit [-acdflmnpstuvSH] [limit] ulimit provides control over the resources available to processes started by the shell, on systems that allow such control. If an option is given, it is interpreted as follows:
-S
-H
Change and report the soft limit associated with a resource.
Change and report the hard limit associated with a resource.
-a
-c
All current limits are reported.
The maximum size of core files created.
-d
-f
The maximum size of a process’s data segment.
The maximum size of files created by the shell.
-l
-m
The maximum size that may be locked into memory.
The maximum resident set size.
-n
-p
-s
-t
The maximum number of open file descriptors.
The pipe buffer size.
The maximum stack size.
-u
-v
The maximum amount of cpu time in seconds.
The maximum number of processes available to a single user.
The maximum amount of virtual memory available to the process.
46 Bash Reference Manual
If limit is given, it is the new value of the specified resource. Otherwise, the current value of the soft limit for the specified resource is printed, unless the
‘-H’ option is supplied. When setting new limits, if neither ‘-H’ nor ‘-S’ is supplied, both the hard and soft limits are set. If no option is given, then ‘-f’ is assumed. Values are in 1024-byte increments, except for ‘-t’, which is in seconds, ‘-p’, which is in units of 512-byte blocks, and ‘-n’ and ‘-u’, which are unscaled values.
The return status is zero unless an invalid option is supplied, a non-numeric argument other than unlimited is supplied as a limit, or an error occurs while setting a new limit.
unalias unalias [-a] [name ... ]
Remove each name from the list of aliases. If ‘-a’ is supplied, all aliases are removed. Aliases are described in
Section 6.6 [Aliases], page 67 .
4.3 The Set Builtin set
This builtin is so complicated that it deserves its own section.
set [--abefhkmnptuvxBCHP] [-o option] [argument ...]
If no options or arguments are supplied, set displays the names and values of all shell variables and functions, sorted according to the current locale, in a format that may be reused as input.
When options are supplied, they set or unset shell attributes. Options, if specified, have the following meanings:
-a
-b
-e
Mark variables and function which are modified or created for export to the environment of subsequent commands.
Cause the status of terminated background jobs to be reported immediately, rather than before printing the next primary prompt.
Exit immediately if a simple command (see
) exits with a non-zero status, unless the command that fails is part of an until or while loop, part of an if statement, part of a && or || list, or if the command’s return status is being inverted using !.
-f
-h
-k
-m
Disable file name generation (globbing).
Locate and remember (hash) commands as they are looked up for execution. This option is enabled by default.
All arguments in the form of assignment statements are placed in the environment for a command, not just those that precede the command name.
Job control is enabled (see
Chapter 7 [Job Control], page 75
).
Chapter 4: Shell Builtin Commands 47
-n
Read commands but do not execute them; this may be used to check a script for syntax errors. This option is ignored by interactive shells.
-o option-name
Set the option corresponding to option-name: allexport
Same as -a.
braceexpand
Same as -B.
emacs
Use an emacs-style line editing interface (see
[Command Line Editing], page 79
).
errexit
Same as -e.
hashall
Same as -h.
histexpand
Same as -H.
history
Enable command history, as described in
[Bash History Facilities], page 103 . This option is on
by default in interactive shells.
ignoreeof
An interactive shell will not exit upon reading EOF.
keyword
Same as -k.
monitor
Same as -m.
noclobber noexec
Same as -C.
Same as -n.
noglob notify
Same as -f.
Same as -b.
nounset
Same as -u.
onecmd
Same as -t.
physical
Same as -P.
posix
Change the behavior of Bash where the default operation differs from the posix 1003.2 standard to match the standard (see
Section 6.11 [Bash POSIX Mode], page 72 ). This is intended to make Bash behave as a
strict superset of that standard.
privileged
Same as -p.
verbose
Same as -v.
48
-p
-t
-u
-v
-x
-B
-C
-H
-P
Bash Reference Manual vi
Use a vi-style line editing interface.
xtrace
Same as -x.
Turn on privileged mode. In this mode, the $BASH_ENV and $ENV files are not processed, shell functions are not inherited from the environment, and the SHELLOPTS variable, if it appears in the environment, is ignored. If the shell is started with the effective user
(group) id not equal to the real user (group) id, and the -p option is not supplied, these actions are taken and the effective user id is set to the real user id. If the -p option is supplied at startup, the effective user id is not reset. Turning this option off causes the effective user and group ids to be set to the real user and group ids.
Exit after reading and executing one command.
Treat unset variables as an error when performing parameter expansion. An error message will be written to the standard error, and a non-interactive shell will exit.
Print shell input lines as they are read.
Print a trace of simple commands and their arguments after they are expanded and before they are executed.
The shell will perform brace expansion (see
). This option is on by default.
Prevent output redirection using ‘>’, ‘>&’, and ‘<>’ from overwriting existing files.
Enable ‘!’ style history substitution (see
Section 9.3 [History Interaction], page 105 ). This option is on by default for interactive
shells.
If set, do not follow symbolic links when performing commands such as cd which change the current directory. The physical directory is used instead. By default, Bash follows the logical chain of directories when performing commands which change the current directory.
For example, if ‘/usr/sys’ is a symbolic link to ‘/usr/local/sys’ then:
$ cd /usr/sys; echo $PWD
/usr/sys
$ cd ..; pwd
/usr
If set -P is on, then:
$ cd /usr/sys; echo $PWD
/usr/local/sys
$ cd ..; pwd
/usr/local
Chapter 4: Shell Builtin Commands 49
--
If no arguments follow this option, then the positional parameters are unset. Otherwise, the positional parameters are set to the arguments, even if some of them begin with a ‘-’.
-
Signal the end of options, cause all remaining arguments to be assigned to the positional parameters. The ‘-x’ and ‘-v’ options are turned off. If there are no arguments, the positional parameters remain unchanged.
Using ‘+’ rather than ‘-’ causes these options to be turned off. The options can also be used upon invocation of the shell. The current set of options may be found in $-.
The remaining N arguments are positional parameters and are assigned, in order, to $1, $2, . . . $N. The special parameter # is set to N.
The return status is always zero unless an invalid option is supplied.
4.4 Special Builtins
For historical reasons, the posix 1003.2 standard has classified several builtin commands as special. When Bash is executing in posix mode, the special builtins differ from other builtin commands in three respects:
1. Special builtins are found before shell functions during command lookup.
2. If a special builtin returns an error status, a non-interactive shell exits.
3. Assignment statements preceding the command stay in effect in the shell environment after the command completes.
When Bash is not executing in posix mode, these builtins behave no differently than the rest of the Bash builtin commands. The Bash posix mode is described in
These are the posix special builtins: break : . continue eval exec exit export readonly return set shift trap unset
50 Bash Reference Manual
Chapter 5: Shell Variables 51
5 Shell Variables
This chapter describes the shell variables that Bash uses. Bash automatically assigns default values to a number of variables.
5.1 Bourne Shell Variables
Bash uses certain shell variables in the same way as the Bourne shell. In some cases,
Bash assigns a default value to the variable.
CDPATH
A colon-separated list of directories used as a search path for the cd builtin command.
HOME
IFS
The current user’s home directory; the default for the cd builtin command. The value of this variable is also used by tilde expansion (see
A list of characters that separate fields; used when the shell splits words as part of expansion.
If this parameter is set to a filename and the MAILPATH variable is not set, Bash informs the user of the arrival of mail in the specified file.
MAILPATH
A colon-separated list of filenames which the shell periodically checks for new mail. Each list entry can specify the message that is printed when new mail arrives in the mail file by separating the file name from the message with a ‘?’.
When used in the text of the message, $_ expands to the name of the current mail file.
OPTARG
OPTIND
The value of the last option argument processed by the getopts builtin.
The index of the last option argument processed by the getopts builtin.
PATH
PS1
PS2
A colon-separated list of directories in which the shell looks for commands.
The primary prompt string. The default value is ‘\s-\v\$ ’. See
[Printing a Prompt], page 70 , for the complete list of escape sequences that are
expanded before PS1 is displayed.
The secondary prompt string. The default value is ‘> ’.
5.2 Bash Variables
These variables are set or used by Bash, but other shells do not normally treat them specially.
A few variables used by Bash are described in different chapters: variables for controlling the job control facilities (see
Section 7.3 [Job Control Variables], page 78 ).
BASH
The full pathname used to execute the current instance of Bash.
52 Bash Reference Manual
BASH_ENV
If this variable is set when Bash is invoked to execute a shell script, its value is expanded and used as the name of a startup file to read before executing the script. See
Section 6.2 [Bash Startup Files], page 60
.
BASH_VERSION
The version number of the current instance of Bash.
BASH_VERSINFO
A readonly array variable (see
) whose members hold version information for this instance of Bash. The values assigned to the array members are as follows:
BASH_VERSINFO[0]
The major version number (the release).
BASH_VERSINFO[1]
The minor version number (the version).
BASH_VERSINFO[2]
The patch level.
BASH_VERSINFO[3]
The build version.
BASH_VERSINFO[4]
The release status (e.g., beta1).
BASH_VERSINFO[5]
The value of MACHTYPE.
COMP_WORDS
An array variable consisting of the individual words in the current command line.
This variable is available only in shell functions invoked by the programmable completion facilities (see
Section 8.6 [Programmable Completion], page 98 ).
COMP_CWORD
An index into ${COMP_WORDS} of the word containing the current cursor position. This variable is available only in shell functions invoked by the programmable completion facilities (see
Section 8.6 [Programmable Completion], page 98 ).
COMP_LINE
The current command line. This variable is available only in shell functions and external commands invoked by the programmable completion facilities (see
Section 8.6 [Programmable Completion], page 98 ).
COMP_POINT
The index of the current cursor position relative to the beginning of the current command. If the current cursor position is at the end of the current command, the value of this variable is equal to ${#COMP_LINE}. This variable is available only in shell functions and external commands invoked by the programmable completion facilities (see
Section 8.6 [Programmable Completion], page 98
).
Chapter 5: Shell Variables 53
COMPREPLY
An array variable from which Bash reads the possible completions generated by a shell function invoked by the programmable completion facility (see
Section 8.6 [Programmable Completion], page 98
).
DIRSTACK
An array variable containing the current contents of the directory stack. Directories appear in the stack in the order they are displayed by the dirs builtin.
Assigning to members of this array variable may be used to modify directories already in the stack, but the pushd and popd builtins must be used to add and remove directories. Assignment to this variable will not change the current directory. If DIRSTACK is unset, it loses its special properties, even if it is subsequently reset.
EUID
The numeric effective user id of the current user. This variable is readonly.
FCEDIT
The editor used as a default by the ‘-e’ option to the fc builtin command.
FIGNORE
A colon-separated list of suffixes to ignore when performing filename completion. A file name whose suffix matches one of the entries in FIGNORE is excluded from the list of matched file names. A sample value is ‘.o:~’
GLOBIGNORE
A colon-separated list of patterns defining the set of filenames to be ignored by filename expansion. If a filename matched by a filename expansion pattern also matches one of the patterns in GLOBIGNORE, it is removed from the list of matches.
GROUPS
An array variable containing the list of groups of which the current user is a member. Assignments to GROUPS have no effect and return an error status. If
GROUPS is unset, it loses its special properties, even if it is subsequently reset.
histchars
Up to three characters which control history expansion, quick substitution, and tokenization (see
Section 9.3 [History Interaction], page 105 ). The first charac-
ter is the history expansion character, that is, the character which signifies the start of a history expansion, normally ‘!’. The second character is the character which signifies ‘quick substitution’ when seen as the first character on a line, normally ‘^’. The optional third character is the character which indicates that the remainder of the line is a comment when found as the first character of a word, usually ‘#’. The history comment character causes history substitution to be skipped for the remaining words on the line. It does not necessarily cause the shell parser to treat the rest of the line as a comment.
HISTCMD
The history number, or index in the history list, of the current command. If
HISTCMD is unset, it loses its special properties, even if it is subsequently reset.
FUNCNAME
The name of any currently-executing shell function. This variable exists only when a shell function is executing. Assignments to FUNCNAME have no effect and return an error status. If FUNCNAME is unset, it loses its special properties, even if it is subsequently reset.
54 Bash Reference Manual
HISTCONTROL
A value of ‘ignorespace’ means to not enter lines which begin with a space or tab into the history list. A value of ‘ignoredups’ means to not enter lines which match the last entered line. A value of ‘ignoreboth’ combines the two options.
Unset, or set to any other value than those above, means to save all lines on the history list. The second and subsequent lines of a multi-line compound command are not tested, and are added to the history regardless of the value of HISTCONTROL.
HISTIGNORE
A colon-separated list of patterns used to decide which command lines should be saved on the history list. Each pattern is anchored at the beginning of the line and must match the complete line (no implicit ‘*’ is appended). Each pattern is tested against the line after the checks specified by HISTCONTROL are applied. In addition to the normal shell pattern matching characters, ‘&’ matches the previous history line. ‘&’ may be escaped using a backslash; the backslash is removed before attempting a match. The second and subsequent lines of a multi-line compound command are not tested, and are added to the history regardless of the value of HISTIGNORE.
HISTIGNORE subsumes the function of HISTCONTROL. A pattern of ‘&’ is identical to ignoredups, and a pattern of ‘[ ]*’ is identical to ignorespace. Combining these two patterns, separating them with a colon, provides the functionality of ignoreboth.
HISTFILE
The name of the file to which the command history is saved. The default value is ‘~/.bash_history’.
HISTSIZE
The maximum number of commands to remember on the history list. The default value is 500.
HISTFILESIZE
The maximum number of lines contained in the history file. When this variable is assigned a value, the history file is truncated, if necessary, to contain no more than that number of lines. The history file is also truncated to this size after writing it when an interactive shell exits. The default value is 500.
HOSTFILE
Contains the name of a file in the same format as ‘/etc/hosts’ that should be read when the shell needs to complete a hostname. The list of possible hostname completions may be changed while the shell is running; the next time hostname completion is attempted after the value is changed, Bash adds the contents of the new file to the existing list. If HOSTFILE is set, but has no value,
Bash attempts to read ‘/etc/hosts’ to obtain the list of possible hostname completions. When HOSTFILE is unset, the hostname list is cleared.
HOSTNAME
The name of the current host.
HOSTTYPE
A string describing the machine Bash is running on.
Chapter 5: Shell Variables 55
IGNOREEOF
Controls the action of the shell on receipt of an EOF character as the sole input.
If set, the value denotes the number of consecutive EOF characters that can be read as the first character on an input line before the shell will exit. If the variable exists but does not have a numeric value (or has no value) then the default is 10. If the variable does not exist, then EOF signifies the end of input to the shell. This is only in effect for interactive shells.
INPUTRC
The name of the Readline initialization file, overriding the default of
‘~/.inputrc’.
LANG
Used to determine the locale category for any category not specifically selected with a variable starting with LC_.
LC_ALL
This variable overrides the value of LANG and any other LC_ variable specifying a locale category.
LC_COLLATE
This variable determines the collation order used when sorting the results of filename expansion, and determines the behavior of range expressions, equivalence classes, and collating sequences within filename expansion and pattern matching (see
Section 3.5.8 [Filename Expansion], page 20 ).
LC_CTYPE
This variable determines the interpretation of characters and the behavior of character classes within filename expansion and pattern matching (see
Section 3.5.8 [Filename Expansion], page 20 ).
LC_MESSAGES
This variable determines the locale used to translate double-quoted strings preceded by a ‘$’ (see
Section 3.1.2.5 [Locale Translation], page 7 ).
LC_NUMERIC
This variable determines the locale category used for number formatting.
LINES
Used by the select builtin command to determine the column length for printing selection lists. Automatically set upon receipt of a SIGWINCH.
COLUMNS
Used by the select builtin command to determine the terminal width when printing selection lists. Automatically set upon receipt of a SIGWINCH.
LINENO
The line number in the script or shell function currently executing.
MACHTYPE
A string that fully describes the system type on which Bash is executing, in the standard gnu cpu-company-system format.
MAILCHECK
How often (in seconds) that the shell should check for mail in the files specified in the MAILPATH or MAIL variables. The default is 60 seconds. When it is time to check for mail, the shell does so before displaying the primary prompt. If this variable is unset, or set to a value that is not a number greater than or equal to zero, the shell disables mail checking.
56 Bash Reference Manual
OLDPWD
OPTERR
The previous working directory as set by the cd builtin.
If set to the value 1, Bash displays error messages generated by the getopts builtin command.
A string describing the operating system Bash is running on.
OSTYPE
PIPESTATUS
An array variable (see
Section 6.7 [Arrays], page 67 ) containing a list of exit sta-
tus values from the processes in the most-recently-executed foreground pipeline
(which may contain only a single command).
PPID
The process id of the shell’s parent process. This variable is readonly.
PROMPT_COMMAND
If set, the value is interpreted as a command to execute before the printing of each primary prompt ($PS1).
PS3
The value of this variable is used as the prompt for the select command. If this variable is not set, the select command prompts with ‘#? ’
PS4
PWD
The value is the prompt printed before the command line is echoed when the
‘-x’ option is set (see
Section 4.3 [The Set Builtin], page 46
). The first character of PS4 is replicated multiple times, as necessary, to indicate multiple levels of indirection. The default is ‘+ ’.
The current working directory as set by the cd builtin.
RANDOM
Each time this parameter is referenced, a random integer between 0 and 32767 is generated. Assigning a value to this variable seeds the random number generator.
The default variable for the read builtin.
REPLY
SECONDS
This variable expands to the number of seconds since the shell was started.
Assignment to this variable resets the count to the value assigned, and the expanded value becomes the value assigned plus the number of seconds since the assignment.
SHELLOPTS
A colon-separated list of enabled shell options. Each word in the list is a valid argument for the ‘-o’ option to the set builtin command (see
Set Builtin], page 46 ). The options appearing in SHELLOPTS are those reported
as ‘on’ by ‘set -o’. If this variable is in the environment when Bash starts up, each shell option in the list will be enabled before reading any startup files.
This variable is readonly.
SHLVL
Incremented by one each time a new instance of Bash is started. This is intended to be a count of how deeply your Bash shells are nested.
Chapter 5: Shell Variables 57
TIMEFORMAT
The value of this parameter is used as a format string specifying how the timing information for pipelines prefixed with the time reserved word should be displayed. The ‘%’ character introduces an escape sequence that is expanded to a time value or other information. The escape sequences and their meanings are as follows; the braces denote optional portions.
%%
A literal ‘%’.
%[p][l]R
The elapsed time in seconds.
%[p][l]U
The number of CPU seconds spent in user mode.
%[p][l]S
The number of CPU seconds spent in system mode.
%P
The CPU percentage, computed as (%U + %S) / %R.
The optional p is a digit specifying the precision, the number of fractional digits after a decimal point. A value of 0 causes no decimal point or fraction to be output. At most three places after the decimal point may be specified; values of p greater than 3 are changed to 3. If p is not specified, the value 3 is used.
The optional l specifies a longer format, including minutes, of the form
MM mSS.FFs.
The value of p determines whether or not the fraction is included.
If this variable is not set, Bash acts as if it had the value
$’\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS’
If the value is null, no timing information is displayed. A trailing newline is added when the format string is displayed.
TMOUT
UID
If set to a value greater than zero, the value is interpreted as the number of seconds to wait for input after issuing the primary prompt when the shell is interactive. Bash terminates after that number of seconds if input does not arrive.
The numeric real user id of the current user. This variable is readonly.
58 Bash Reference Manual
Chapter 6: Bash Features 59
6 Bash Features
This section describes features unique to Bash.
6.1 Invoking Bash bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o option] [argument ...] bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o option] -c string [argument ...] bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o option] [argument ...]
In addition to the single-character shell command-line options (see
Builtin], page 46 ), there are several multi-character options that you can use. These options
must appear on the command line before the single-character options in order for them to be recognized.
--dump-po-strings
A list of all double-quoted strings preceded by ‘$’ is printed on the standard ouput in the gnu gettext PO (portable object) file format. Equivalent to ‘-D’ except for the output format.
--dump-strings
Equivalent to ‘-D’.
--help
Display a usage message on standard output and exit sucessfully.
--init-file filename
--rcfile filename
Execute commands from filename (instead of ‘~/.bashrc’) in an interactive shell.
--login
Make this shell act as if it had been directly invoked by login.
When the shell is interactive, this is equivalent to starting a login shell with ‘exec -l bash’. When the shell is not interactive, the login shell startup files will be executed. ‘exec bash --login’ will replace the current shell with a Bash login shell. See
Section 6.2 [Bash Startup Files], page 60
, for a description of the special behavior of a login shell.
--noediting
Do not use the gnu Readline library (see
Chapter 8 [Command Line Editing], page 79 ) to read command lines when the shell is interactive.
--noprofile
Don’t load the system-wide startup file ‘/etc/profile’ or any of the personal initialization files ‘~/.bash_profile’, ‘~/.bash_login’, or ‘~/.profile’ when
Bash is invoked as a login shell.
--norc
Don’t read the ‘~/.bashrc’ initialization file in an interactive shell. This is on by default if the shell is invoked as sh.
--posix
Change the behavior of Bash where the default operation differs from the posix
1003.2 standard to match the standard. This is intended to make Bash behave as a strict superset of that standard. See
Section 6.11 [Bash POSIX Mode], page 72 , for a description of the Bash posix mode.
60 Bash Reference Manual
--restricted
Make the shell a restricted shell (see
Section 6.10 [The Restricted Shell], page 71 ).
--verbose
Equivalent to ‘-v’. Print shell input lines as they’re read.
--version
Show version information for this instance of Bash on the standard output and exit successfully.
There are several single-character options that may be supplied at invocation which are not available with the set builtin.
-c string
Read and execute commands from string after processing the options, then exit.
Any remaining arguments are assigned to the positional parameters, starting with $0.
-i
-r
-s
-D
--
Force the shell to run interactively. Interactive shells are described in
[Interactive Shells], page 62 .
Make the shell a restricted shell (see
Section 6.10 [The Restricted Shell], page 71 ).
If this option is present, or if no arguments remain after option processing, then commands are read from the standard input. This option allows the positional parameters to be set when invoking an interactive shell.
A list of all double-quoted strings preceded by ‘$’ is printed on the standard ouput. These are the strings that are subject to language translation when the current locale is not C or POSIX (see
A -- signals the end of options and disables further option processing. Any arguments after the -- are treated as filenames and arguments.
An interactive shell is one started without non-option arguments, unless ‘-s’ is specified, without specifying the ‘-c’ option, and whose input and output are both connected to terminals (as determined by isatty(3)), or one started with the ‘-i’ option. See
, for more information.
If arguments remain after option processing, and neither the ‘-c’ nor the ‘-s’ option has been supplied, the first argument is assumed to be the name of a file containing shell commands (see
Section 3.8 [Shell Scripts], page 28 ). When Bash is invoked in this fashion,
$0 is set to the name of the file, and the positional parameters are set to the remaining arguments. Bash reads and executes commands from this file, then exits. Bash’s exit status is the exit status of the last command executed in the script. If no commands are executed, the exit status is 0.
6.2 Bash Startup Files
This section describs how Bash executes its startup files. If any of the files exist but cannot be read, Bash reports an error. Tildes are expanded in file names as described above under Tilde Expansion (see
Section 3.5.2 [Tilde Expansion], page 16 ).
Chapter 6: Bash Features 61
Interactive shells are described in
Section 6.3 [Interactive Shells], page 62
.
Invoked as an interactive login shell, or with ‘--login’
When Bash is invoked as an interactive login shell, or as a non-interactive shell with the ‘--login’ option, it first reads and executes commands from the file ‘/etc/profile’, if that file exists. After reading that file, it looks for ‘~/.bash_profile’, ‘~/.bash_login’, and ‘~/.profile’, in that order, and reads and executes commands from the first one that exists and is readable. The ‘--noprofile’ option may be used when the shell is started to inhibit this behavior.
When a login shell exits, Bash reads and executes commands from the file
‘~/.bash_logout’, if it exists.
Invoked as an interactive non-login shell
When an interactive shell that is not a login shell is started, Bash reads and executes commands from ‘~/.bashrc’, if that file exists. This may be inhibited by using the ‘--norc’ option. The ‘--rcfile file’ option will force Bash to read and execute commands from file instead of ‘~/.bashrc’.
So, typically, your ‘~/.bash_profile’ contains the line if [ -f ~/.bashrc ]; then . ~/.bashrc; fi after (or before) any login-specific initializations.
Invoked non-interactively
When Bash is started non-interactively, to run a shell script, for example, it looks for the variable BASH_ENV in the environment, expands its value if it appears there, and uses the expanded value as the name of a file to read and execute. Bash behaves as if the following command were executed: if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi but the value of the PATH variable is not used to search for the file name.
As noted above, if a non-interactive shell is invoked with the ‘--login’ option, Bash attempts to read and execute commands from the login shell startup files.
Invoked with name sh
If Bash is invoked with the name sh, it tries to mimic the startup behavior of historical versions of sh as closely as possible, while conforming to the posix standard as well.
When invoked as an interactive login shell, or as a non-interactive shell with the
‘--login’ option, it first attempts to read and execute commands from ‘/etc/profile’ and ‘~/.profile’, in that order. The ‘--noprofile’ option may be used to inhibit this behavior.
When invoked as an interactive shell with the name sh, Bash looks for the variable ENV, expands its value if it is defined, and uses the expanded value as the name of a file to read and execute. Since a shell invoked as sh does not attempt to read and execute commands from any other startup files, the ‘--rcfile’ option has no effect. A
62 Bash Reference Manual non-interactive shell invoked with the name sh does not attempt to read any other startup files.
When invoked as sh, Bash enters posix mode after the startup files are read.
Invoked in posix mode
When Bash is started in posix mode, as with the ‘--posix’ command line option, it follows the posix standard for startup files. In this mode, interactive shells expand the ENV variable and commands are read and executed from the file whose name is the expanded value. No other startup files are read.
Invoked by remote shell daemon
Bash attempts to determine when it is being run by the remote shell daemon, usually rshd. If Bash determines it is being run by rshd, it reads and executes commands from
‘~/.bashrc’, if that file exists and is readable. It will not do this if invoked as sh. The
‘--norc’ option may be used to inhibit this behavior, and the ‘--rcfile’ option may be used to force another file to be read, but rshd does not generally invoke the shell with those options or allow them to be specified.
Invoked with unequal effective and real uid/gid s
If Bash is started with the effective user (group) id not equal to the real user (group) id, and the -p option is not supplied, no startup files are read, shell functions are not inherited from the environment, the SHELLOPTS variable, if it appears in the environment, is ignored, and the effective user id is set to the real user id. If the -p option is supplied at invocation, the startup behavior is the same, but the effective user id is not reset.
6.3 Interactive Shells
6.3.1 What is an Interactive Shell?
An interactive shell is one started without non-option arguments, unless ‘-s’ is specified, without specifiying the ‘-c’ option, and whose input and output are both connected to terminals (as determined by isatty(3)), or one started with the ‘-i’ option.
An interactive shell generally reads from and writes to a user’s terminal.
The ‘-s’ invocation option may be used to set the positional parameters when an interactive shell is started.
6.3.2 Is this Shell Interactive?
To determine within a startup script whether or not Bash is running interactively, test the value of the ‘-’ special parameter. It contains i when the shell is interactive. For example:
Chapter 6: Bash Features 63 case "$-" in
*i*) echo This shell is interactive ;;
*) echo This shell is not interactive ;; esac
Alternatively, startup scripts may examine the variable PS1; it is unset in non-interactive shells, and set in interactive shells. Thus: if [ -z "$PS1" ]; then echo This shell is not interactive else echo This shell is interactive fi
6.3.3 Interactive Shell Behavior
When the shell is running interactively, it changes its behavior in several ways.
1. Startup files are read and executed as described in
Section 6.2 [Bash Startup Files], page 60 .
2. Job Control (see
Chapter 7 [Job Control], page 75
) is enabled by default. When job control is in effect, Bash ignores the keyboard-generated job control signals SIGTTIN,
SIGTTOU, and SIGTSTP.
3. Bash expands and displays PS1 before reading the first line of a command, and expands and displays PS2 before reading the second and subsequent lines of a multi-line command.
4. Bash executes the value of the PROMPT_COMMAND variable as a command before printing the primary prompt, $PS1 (see
Section 5.2 [Bash Variables], page 51 ).
5. Readline (see
Chapter 8 [Command Line Editing], page 79
) is used to read commands from the user’s terminal.
6. Bash inspects the value of the ignoreeof option to set -o instead of exiting immediately when it receives an EOF on its standard input when reading a command (see
Section 4.3 [The Set Builtin], page 46
).
7. Command history (see
Section 9.1 [Bash History Facilities], page 103 ) and history
expansion (see
Section 9.3 [History Interaction], page 105 ) are enabled by default. Bash
will save the command history to the file named by $HISTFILE when an interactive shell exits.
8. Alias expansion (see
Section 6.6 [Aliases], page 67 ) is performed by default.
9. In the absence of any traps, Bash ignores SIGTERM (see
Section 3.7.6 [Signals], page 28
).
10. In the absence of any traps, SIGINT is caught and handled ((see
Section 3.7.6 [Signals], page 28 ). SIGINT will interrupt some shell builtins.
11. An interactive login shell sends a SIGHUP to all jobs on exit if the hupoxexit shell option has been enabled (see
Section 3.7.6 [Signals], page 28
).
12. The ‘-n’ invocation option is ignored, and ‘set -n’ has no effect (see
).
13. Bash will check for mail periodically, depending on the values of the MAIL, MAILPATH, and MAILCHECK shell variables (see
Section 5.2 [Bash Variables], page 51 ).
64 Bash Reference Manual
14. Expansion errors due to references to unbound shell variables after ‘set -u’ has been enabled will not cause the shell to exit (see
Section 4.3 [The Set Builtin], page 46 ).
15. The shell will not exit on expansion errors caused by var being unset or null in
${var:?word} expansions (see
Section 3.5.3 [Shell Parameter Expansion], page 17 ).
16. Redirection errors encountered by shell builtins will not cause the shell to exit.
17. When running in posix mode, a special builtin returning an error status will not cause the shell to exit (see
Section 6.11 [Bash POSIX Mode], page 72 ).
18. A failed exec will not cause the shell to exit (see
Section 4.1 [Bourne Shell Builtins], page 31 ).
19. Parser syntax errors will not cause the shell to exit.
20. Simple spelling correction for directory arguments to the cd builtin is enabled by default
(see the description of the cdspell option to the shopt builtin in
21. The shell will check the value of the TMOUT variable and exit if a command is not read within the specified number of seconds after printing $PS1 (see
).
6.4 Bash Conditional Expressions
Conditional expressions are used by the [[ compound command and the test and [ builtin commands.
Expressions may be unary or binary. Unary expressions are often used to examine the status of a file. There are string operators and numeric comparison operators as well. If the file argument to one of the primaries is of the form ‘/dev/fd/N ’, then file descriptor N is checked. If the file argument to one of the primaries is one of ‘/dev/stdin’, ‘/dev/stdout’, or ‘/dev/stderr’, file descriptor 0, 1, or 2, respectively, is checked.
-a file
True if file exists.
-b file
-c file
-d file
-e file
True if file exists and is a block special file.
True if file exists and is a character special file.
True if file exists and is a directory.
True if file exists.
-f file
-g file
-h file
-k file
-p file
-r file
-s file
-t fd
True if file exists and is a regular file.
True if file exists and its set-group-id bit is set.
True if file exists and is a symbolic link.
True if file exists and its "sticky" bit is set.
True if file exists and is a named pipe (FIFO).
True if file exists and is readable.
True if file exists and has a size greater than zero.
True if file descriptor fd is open and refers to a terminal.
Chapter 6: Bash Features 65
-u file
-w file
-x file
-O file
-G file
True if file exists and its set-user-id bit is set.
True if file exists and is writable.
True if file exists and is executable.
True if file exists and is owned by the effective user id.
True if file exists and is owned by the effective group id.
True if file exists and is a symbolic link.
-L file
-S file
-N file
True if file exists and is a socket.
True if file exists and has been modified since it was last read.
file1 -nt file2
True if file1 is newer (according to modification date) than file2.
file1 -ot file2
True if file1 is older than file2.
file1 -ef file2
True if file1 and file2 have the same device and inode numbers.
-o optname
True if shell option optname is enabled. The list of options appears in the description of the ‘-o’ option to the set builtin (see
Section 4.3 [The Set Builtin], page 46 ).
-z string
True if the length of string is zero.
-n string string True if the length of string is non-zero.
string1 == string2
True if the strings are equal. ‘=’ may be used in place of ‘==’.
string1 != string2
True if the strings are not equal.
string1 < string2
True if string1 sorts before string2 lexicographically in the current locale.
string1 > string2
True if string1 sorts after string2 lexicographically in the current locale.
arg1 OP arg2
OP is one of ‘-eq’, ‘-ne’, ‘-lt’, ‘-le’, ‘-gt’, or ‘-ge’. These arithmetic binary operators return true if arg1 is equal to, not equal to, less than, less than or equal to, greater than, or greater than or equal to arg2, respectively. Arg1 and arg2 may be positive or negative integers.
66 Bash Reference Manual
6.5 Shell Arithmetic
The shell allows arithmetic expressions to be evaluated, as one of the shell expansions or by the let builtin.
Evaluation is done in long integers with no check for overflow, though division by 0 is trapped and flagged as an error. The operators and their precedence and associativity are the same as in the C language. The following list of operators is grouped into levels of equal-precedence operators. The levels are listed in order of decreasing precedence.
id++ id-variable post-increment and post-decrement
++id --id variable pre-increment and pre-decrement
- + unary minus and plus
! ~ logical and bitwise negation
**
* / %
+ -
<< >> exponentiation multiplication, division, remainder addition, subtraction left and right bitwise shifts
<= >= < > comparison
== != equality and inequality
&
^ bitwise AND bitwise exclusive OR
|
&& bitwise OR logical AND
|| logical OR expr ? expr : expr conditional evaluation
= *= /= %= += -= <<= >>= &= ^= |= assignment expr1 , expr2 comma
Shell variables are allowed as operands; parameter expansion is performed before the expression is evaluated. Within an expression, shell variables may also be referenced by name without using the parameter expansion syntax. The value of a variable is evaluated as an arithmetic expression when it is referenced. A shell variable need not have its integer attribute turned on to be used in an expression.
Constants with a leading 0 are interpreted as octal numbers. A leading ‘0x’ or ‘0X’ denotes hexadecimal. Otherwise, numbers take the form [base#]n, where base is a decimal number between 2 and 64 representing the arithmetic base, and n is a number in that base.
If base# is omitted, then base 10 is used. The digits greater than 9 are represented by
Chapter 6: Bash Features 67 the lowercase letters, the uppercase letters, ‘_’, and ‘@’, in that order. If base is less than or equal to 36, lowercase and uppercase letters may be used interchangably to represent numbers between 10 and 35.
Operators are evaluated in order of precedence.
Sub-expressions in parentheses are evaluated first and may override the precedence rules above.
6.6 Aliases
Aliases allow a string to be substituted for a word when it is used as the first word of a simple command. The shell maintains a list of aliases that may be set and unset with the alias and unalias builtin commands.
The first word of each simple command, if unquoted, is checked to see if it has an alias.
If so, that word is replaced by the text of the alias. The alias name and the replacement text may contain any valid shell input, including shell metacharacters, with the exception that the alias name may not contain ‘=’. The first word of the replacement text is tested for aliases, but a word that is identical to an alias being expanded is not expanded a second time. This means that one may alias ls to "ls -F", for instance, and Bash does not try to recursively expand the replacement text. If the last character of the alias value is a space or tab character, then the next command word following the alias is also checked for alias expansion.
Aliases are created and listed with the alias command, and removed with the unalias command.
There is no mechanism for using arguments in the replacement text, as in csh.
If arguments are needed, a shell function should be used (see
Section 3.3 [Shell Functions], page 12 ).
Aliases are not expanded when the shell is not interactive, unless the expand_aliases shell option is set using shopt (see
Section 4.2 [Bash Builtins], page 36 ).
The rules concerning the definition and use of aliases are somewhat confusing. Bash always reads at least one complete line of input before executing any of the commands on that line. Aliases are expanded when a command is read, not when it is executed.
Therefore, an alias definition appearing on the same line as another command does not take effect until the next line of input is read. The commands following the alias definition on that line are not affected by the new alias. This behavior is also an issue when functions are executed. Aliases are expanded when a function definition is read, not when the function is executed, because a function definition is itself a compound command. As a consequence, aliases defined in a function are not available until after that function is executed. To be safe, always put alias definitions on a separate line, and do not use alias in compound commands.
For almost every purpose, shell functions are preferred over aliases.
6.7 Arrays
Bash provides one-dimensional array variables. Any variable may be used as an array; the declare builtin will explicitly declare an array. There is no maximum limit on the size
68 Bash Reference Manual of an array, nor any requirement that members be indexed or assigned contiguously. Arrays are zero-based.
An array is created automatically if any variable is assigned to using the syntax name[subscript]=value
The subscript is treated as an arithmetic expression that must evaluate to a number greater than or equal to zero. To explicitly declare an array, use declare -a name
The syntax declare -a name[subscript] is also accepted; the subscript is ignored. Attributes may be specified for an array variable using the declare and readonly builtins. Each attribute applies to all members of an array.
Arrays are assigned to using compound assignments of the form name=(value1 ... valuen) where each value is of the form [[subscript]=]string. If the optional subscript is supplied, that index is assigned to; otherwise the index of the element assigned is the last index assigned to by the statement plus one. Indexing starts at zero. This syntax is also accepted by the declare builtin. Individual array elements may be assigned to using the name[subscript]=value syntax introduced above.
Any element of an array may be referenced using ${name[subscript]}. The braces are required to avoid conflicts with the shell’s filename expansion operators. If the subscript is
‘@’ or ‘*’, the word expands to all members of the array name. These subscripts differ only when the word appears within double quotes. If the word is double-quoted, ${name[*]} expands to a single word with the value of each array member separated by the first character of the IFS variable, and ${name[@]} expands each element of name to a separate word.
When there are no array members, ${name[@]} expands to nothing. This is analogous to the expansion of the special parameters ‘@’ and ‘*’. ${#name[subscript]} expands to the length of ${name[subscript]}. If subscript is ‘@’ or ‘*’, the expansion is the number of elements in the array. Referencing an array variable without a subscript is equivalent to referencing element zero.
The unset builtin is used to destroy arrays. unset name[subscript] destroys the array element at index subscript. unset name, where name is an array, removes the entire array.
A subscript of ‘*’ or ‘@’ also removes the entire array.
The declare, local, and readonly builtins each accept a ‘-a’ option to specify an array.
The read builtin accepts a ‘-a’ option to assign a list of words read from the standard input to an array, and can read values from the standard input into individual array elements.
The set and declare builtins display array values in a way that allows them to be reused as input.
6.8 The Directory Stack
The directory stack is a list of recently-visited directories. The pushd builtin adds directories to the stack as it changes the current directory, and the popd builtin removes specified
Chapter 6: Bash Features 69 directories from the stack and changes the current directory to the directory removed. The dirs builtin displays the contents of the directory stack.
The contents of the directory stack are also visible as the value of the DIRSTACK shell variable.
6.8.1 Directory Stack Builtins
dirs dirs [+N | -N ] [-clpv]
Display the list of currently remembered directories. Directories are added to the list with the pushd command; the popd command removes directories from the list.
+N
Displays the N th directory (counting from the left of the list printed by dirs when invoked without options), starting with zero.
-N
-c
-l
Displays the N th directory (counting from the right of the list printed by dirs when invoked without options), starting with zero.
Clears the directory stack by deleting all of the elements.
-p
-v
Produces a longer listing; the default listing format uses a tilde to denote the home directory.
Causes dirs to print the directory stack with one entry per line.
Causes dirs to print the directory stack with one entry per line, prefixing each entry with its index in the stack.
popd popd [+N | -N ] [-n]
Remove the top entry from the directory stack, and cd to the new top directory.
When no arguments are given, popd removes the top directory from the stack and performs a cd to the new top directory. The elements are numbered from
0 starting at the first directory listed with dirs; i.e., popd is equivalent to popd
+0.
+N
Removes the N th directory (counting from the left of the list printed by dirs), starting with zero.
-N
-n
Removes the N th directory (counting from the right of the list printed by dirs), starting with zero.
Suppresses the normal change of directory when removing directories from the stack, so that only the stack is manipulated.
pushd pushd [dir | +N | -N ] [-n]
Save the current directory on the top of the directory stack and then cd to dir.
With no arguments, pushd exchanges the top two directories.
70 Bash Reference Manual
+N
-N
-n dir
Brings the N th directory (counting from the left of the list printed by dirs, starting with zero) to the top of the list by rotating the stack.
Brings the N th directory (counting from the right of the list printed by dirs, starting with zero) to the top of the list by rotating the stack.
Suppresses the normal change of directory when adding directories to the stack, so that only the stack is manipulated.
Makes the current working directory be the top of the stack, and then executes the equivalent of ‘cd dir’. cds to dir.
6.9 Controlling the Prompt
The value of the variable PROMPT_COMMAND is examined just before Bash prints each primary prompt. If PROMPT_COMMAND is set and has a non-null value, then the value is executed just as if it had been typed on the command line.
In addition, the following table describes the special characters which can appear in the prompt variables:
\a
A bell character.
\d
\e
\h
The date, in "Weekday Month Date" format (e.g., "Tue May 26").
An escape character.
The hostname, up to the first ‘.’.
\H
\j
The hostname.
The number of jobs currently managed by the shell.
\l
\n
The basename of the shell’s terminal device name.
A newline.
\r
\s
\t
A carriage return.
The name of the shell, the basename of $0 (the portion following the final slash).
The time, in 24-hour HH:MM:SS format.
\T
\@
The time, in 12-hour HH:MM:SS format.
The time, in 12-hour am/pm format.
\u
\v
The username of the current user.
The version of Bash (e.g., 2.00)
\V
\w
\W
\!
The release of Bash, version + patchlevel (e.g., 2.00.0)
The current working directory.
The basename of $PWD.
The history number of this command.
Chapter 6: Bash Features 71
\#
\$
\nnn
\\
\[
The command number of this command.
If the effective uid is 0, #, otherwise $.
The character whose ASCII code is the octal value nnn.
A backslash.
Begin a sequence of non-printing characters. This could be used to embed a terminal control sequence into the prompt.
End a sequence of non-printing characters.
\]
The command number and the history number are usually different: the history number of a command is its position in the history list, which may include commands restored from the history file (see
Section 9.1 [Bash History Facilities], page 103
), while the command number is the position in the sequence of commands executed during the current shell session.
After the string is decoded, it is expanded via parameter expansion, command substitution, arithmetic expansion, and quote removal, subject to the value of the promptvars shell option (see
Section 4.2 [Bash Builtins], page 36
).
6.10 The Restricted Shell
If Bash is started with the name rbash, or the ‘--restricted’ option is supplied at invocation, the shell becomes restricted. A restricted shell is used to set up an environment more controlled than the standard shell. A restricted shell behaves identically to bash with the exception that the following are disallowed:
• Changing directories with the cd builtin.
• Setting or unsetting the values of the SHELL, PATH, ENV, or BASH_ENV variables.
• Specifying command names containing slashes.
• Specifying a filename containing a slash as an argument to the . builtin command.
• Specifying a filename containing a slash as an argument to the ‘-p’ option to the hash builtin command.
• Importing function definitions from the shell environment at startup.
• Parsing the value of SHELLOPTS from the shell environment at startup.
• Redirecting output using the ‘>’, ‘>|’, ‘<>’, ‘>&’, ‘&>’, and ‘>>’ redirection operators.
• Using the exec builtin to replace the shell with another command.
• Adding or deleting builtin commands with the ‘-f’ and ‘-d’ options to the enable builtin.
• Specifying the ‘-p’ option to the command builtin.
• Turning off restricted mode with ‘set +r’ or ‘set +o restricted’.
72 Bash Reference Manual
6.11 Bash POSIX Mode
Starting Bash with the ‘--posix’ command-line option or executing ‘set -o posix’ while
Bash is running will cause Bash to conform more closely to the posix 1003.2 standard by changing the behavior to match that specified by posix in areas where the Bash default differs.
The following list is what’s changed when ‘posix mode’ is in effect:
1. When a command in the hash table no longer exists, Bash will re-search $PATH to find the new location. This is also available with ‘shopt -s checkhash’.
2. The message printed by the job control code and builtins when a job exits with a non-zero status is ‘Done(status)’.
3. The message printed by the job control code and builtins when a job is stopped is
‘Stopped(signame)’, where signame is, for example, SIGTSTP.
4. Reserved words may not be aliased.
5. The posix 1003.2 PS1 and PS2 expansions of ‘!’ to the history number and ‘!!’ to
‘!’ are enabled, and parameter expansion is performed on the values of PS1 and PS2 regardless of the setting of the promptvars option.
6. Interactive comments are enabled by default. (Bash has them on by default anyway.)
7. The posix 1003.2 startup files are executed ($ENV) rather than the normal Bash files.
8. Tilde expansion is only performed on assignments preceding a command name, rather than on all assignment statements on the line.
9. The default history file is ‘~/.sh_history’ (this is the default value of $HISTFILE).
10. The output of ‘kill -l’ prints all the signal names on a single line, separated by spaces.
11. Non-interactive shells exit if filename in . filename is not found.
12. Non-interactive shells exit if a syntax error in an arithmetic expansion results in an invalid expression.
13. Redirection operators do not perform filename expansion on the word in the redirection unless the shell is interactive.
14. Redirection operators do not perform word splitting on the word in the redirection.
15. Function names must be valid shell names. That is, they may not contain characters other than letters, digits, and underscores, and may not start with a digit. Declaring a function with an invalid name causes a fatal syntax error in non-interactive shells.
16. posix 1003.2 ‘special’ builtins are found before shell functions during command lookup.
17. If a posix 1003.2 special builtin returns an error status, a non-interactive shell exits.
The fatal errors are those listed in the POSIX.2 standard, and include things like passing incorrect options, redirection errors, variable assignment errors for assignments preceding the command name, and so on.
18. If the cd builtin finds a directory to change to using $CDPATH, the value it assigns to the PWD variable does not contain any symbolic links, as if ‘cd -P’ had been executed.
19. If CDPATH is set, the cd builtin will not implicitly append the current directory to it.
This means that cd will fail if no valid directory name can be constructed from any of the entries in $CDPATH, even if the a directory with the same name as the name given as an argument to cd exists in the current directory.
Chapter 6: Bash Features 73
20. A non-interactive shell exits with an error status if a variable assignment error occurs when no command name follows the assignment statements. A variable assignment error occurs, for example, when trying to assign a value to a readonly variable.
21. A non-interactive shell exits with an error status if the iteration variable in a for statement or the selection variable in a select statement is a readonly variable.
22. Process substitution is not available.
23. Assignment statements preceding posix 1003.2 special builtins persist in the shell environment after the builtin completes.
24. Assignment statements preceding shell function calls persist in the shell environment after the function returns, as if a posix special builtin command had been executed.
25. The export and readonly builtin commands display their output in the format required by posix 1003.2.
26. The trap builtin displays signal names without the leading SIG.
27. The . and source builtins do not search the current directory for the filename argument if it is not found by searching PATH.
28. Subshells spawned to execute command substitutions inherit the value of the ‘-e’ option from the parent shell. When not in posix mode, Bash clears the ‘-e’ option in such subshells.
29. Alias expansion is always enabled, even in non-interactive shells.
30. When the set builtin is invoked without options, it does not display shell function names and definitions.
There is other posix 1003.2 behavior that Bash does not implement. Specifically:
1. Assignment statements affect the execution environment of all builtins, not just special ones.
2. When a subshell is created to execute a shell script with execute permission, but without a leading ‘#!’, Bash sets $0 to the full pathname of the script as found by searching
$PATH, rather than the command as typed by the user.
3. When using ‘.’ to source a shell script found in $PATH, bash checks execute permission bits rather than read permission bits, just as if it were searching for a command.
74 Bash Reference Manual
Chapter 7: Job Control 75
7 Job Control
This chapter discusses what job control is, how it works, and how Bash allows you to access its facilities.
7.1 Job Control Basics
Job control refers to the ability to selectively stop (suspend) the execution of processes and continue (resume) their execution at a later point. A user typically employs this facility via an interactive interface supplied jointly by the system’s terminal driver and Bash.
The shell associates a job with each pipeline. It keeps a table of currently executing jobs, which may be listed with the jobs command. When Bash starts a job asynchronously, it prints a line that looks like:
[1] 25647 indicating that this job is job number 1 and that the process id of the last process in the pipeline associated with this job is 25647. All of the processes in a single pipeline are members of the same job. Bash uses the job abstraction as the basis for job control.
To facilitate the implementation of the user interface to job control, the operating system maintains the notion of a current terminal process group id. Members of this process group
(processes whose process group id is equal to the current terminal process group id) receive keyboard-generated signals such as SIGINT. These processes are said to be in the foreground.
Background processes are those whose process group id differs from the terminal’s; such processes are immune to keyboard-generated signals. Only foreground processes are allowed to read from or write to the terminal. Background processes which attempt to read from
(write to) the terminal are sent a SIGTTIN (SIGTTOU) signal by the terminal driver, which, unless caught, suspends the process.
If the operating system on which Bash is running supports job control, Bash contains facilities to use it. Typing the suspend character (typically ‘^Z’, Control-Z) while a process is running causes that process to be stopped and returns control to Bash. Typing the delayed suspend character (typically ‘^Y’, Control-Y) causes the process to be stopped when it attempts to read input from the terminal, and control to be returned to Bash. The user then manipulates the state of this job, using the bg command to continue it in the background, the fg command to continue it in the foreground, or the kill command to kill it. A ‘^Z’ takes effect immediately, and has the additional side effect of causing pending output and typeahead to be discarded.
There are a number of ways to refer to a job in the shell. The character ‘%’ introduces a job name.
Job number n may be referred to as ‘%n’. The symbols ‘%%’ and ‘%+’ refer to the shell’s notion of the current job, which is the last job stopped while it was in the foreground or started in the background. The previous job may be referenced using ‘%-’. In output pertaining to jobs (e.g., the output of the jobs command), the current job is always flagged with a ‘+’, and the previous job with a ‘-’.
A job may also be referred to using a prefix of the name used to start it, or using a substring that appears in its command line. For example, ‘%ce’ refers to a stopped ce job.
76 Bash Reference Manual
Using ‘%?ce’, on the other hand, refers to any job containing the string ‘ce’ in its command line. If the prefix or substring matches more than one job, Bash reports an error.
Simply naming a job can be used to bring it into the foreground: ‘%1’ is a synonym for
‘fg %1’, bringing job 1 from the background into the foreground. Similarly, ‘%1 &’ resumes job 1 in the background, equivalent to ‘bg %1’
The shell learns immediately whenever a job changes state. Normally, Bash waits until it is about to print a prompt before reporting changes in a job’s status so as to not interrupt any other output. If the the ‘-b’ option to the set builtin is enabled, Bash reports such changes immediately (see
Section 4.3 [The Set Builtin], page 46
).
If an attempt to exit Bash is while jobs are stopped, the shell prints a message warning that there are stopped jobs. The jobs command may then be used to inspect their status.
If a second attempt to exit is made without an intervening command, Bash does not print another warning, and the stopped jobs are terminated.
7.2 Job Control Builtins bg bg [jobspec]
Resume the suspended job jobspec in the background, as if it had been started with ‘&’. If jobspec is not supplied, the current job is used. The return status is zero unless it is run when job control is not enabled, or, when run with job control enabled, if jobspec was not found or jobspec specifies a job that was started without job control.
fg fg [jobspec]
Resume the job jobspec in the foreground and make it the current job. If jobspec is not supplied, the current job is used. The return status is that of the command placed into the foreground, or non-zero if run when job control is disabled or, when run with job control enabled, jobspec does not specify a valid job or jobspec specifies a job that was started without job control.
jobs jobs [-lnprs] [jobspec] jobs -x command [arguments]
The first form lists the active jobs. The options have the following meanings:
-l
-n
List process ids in addition to the normal information.
Display information only about jobs that have changed status since the user was last notified of their status.
-p
-r
-s
List only the process id of the job’s process group leader.
Restrict output to running jobs.
Restrict output to stopped jobs.
Chapter 7: Job Control 77
If jobspec is given, output is restricted to information about that job. If jobspec is not supplied, the status of all jobs is listed.
If the ‘-x’ option is supplied, jobs replaces any jobspec found in command or arguments with the corresponding process group id, and executes command, passing it arguments, returning its exit status.
kill kill [-s sigspec] [-n signum] [-sigspec] jobspec or pid kill -l [exit status]
Send a signal specified by sigspec or signum to the process named by job specification jobspec or process id pid. sigspec is either a signal name such as SIGINT
(with or without the SIG prefix) or a signal number; signum is a signal number.
If sigspec and signum are not present, SIGTERM is used. The ‘-l’ option lists the signal names. If any arguments are supplied when ‘-l’ is given, the names of the signals corresponding to the arguments are listed, and the return status is zero. exit status is a number specifying a signal number or the exit status of a process terminated by a signal. The return status is zero if at least one signal was successfully sent, or non-zero if an error occurs or an invalid option is encountered.
wait wait [jobspec or pid]
Wait until the child process specified by process id pid or job specification jobspec exits and return the exit status of the last command waited for. If a job spec is given, all processes in the job are waited for. If no arguments are given, all currently active child processes are waited for, and the return status is zero. If neither jobspec nor pid specifies an active child process of the shell, the return status is 127.
disown disown [-ar] [-h] [jobspec ...]
Without options, each jobspec is removed from the table of active jobs. If the
‘-h’ option is given, the job is not removed from the table, but is marked so that SIGHUP is not sent to the job if the shell receives a SIGHUP. If jobspec is not present, and neither the ‘-a’ nor ‘-r’ option is supplied, the current job is used. If no jobspec is supplied, the ‘-a’ option means to remove or mark all jobs; the ‘-r’ option without a jobspec argument restricts operation to running jobs.
suspend suspend [-f]
Suspend the execution of this shell until it receives a SIGCONT signal. The ‘-f’ option means to suspend even if the shell is a login shell.
When job control is not active, the kill and wait builtins do not accept jobspec arguments. They must be supplied process ids.
78 Bash Reference Manual
7.3 Job Control Variables auto_resume
This variable controls how the shell interacts with the user and job control. If this variable exists then single word simple commands without redirections are treated as candidates for resumption of an existing job. There is no ambiguity allowed; if there is more than one job beginning with the string typed, then the most recently accessed job will be selected. The name of a stopped job, in this context, is the command line used to start it. If this variable is set to the value
‘exact’, the string supplied must match the name of a stopped job exactly; if set to ‘substring’, the string supplied needs to match a substring of the name of a stopped job. The ‘substring’ value provides functionality analogous to the ‘%?’ job id (see
Section 7.1 [Job Control Basics], page 75 ). If set to any
other value, the supplied string must be a prefix of a stopped job’s name; this provides functionality analogous to the ‘%’ job id.
Chapter 8: Command Line Editing 79
8 Command Line Editing
This chapter describes the basic features of the gnu command line editing interface.
Command line editing is provided by the Readline library, which is used by several different programs, including Bash.
8.1 Introduction to Line Editing
The following paragraphs describe the notation used to represent keystrokes.
The text C-k is read as ‘Control-K’ and describes the character produced when the h k i key is pressed while the Control key is depressed.
The text M-k is read as ‘Meta-K’ and describes the character produced when the Meta key (if you have one) is depressed, and the h k i key is pressed. The Meta key is labeled h
ALT i on many keyboards. On keyboards with two keys labeled h
ALT i (usually to either side of the space bar), the h
ALT i on the left side is generally set to work as a Meta key. The h
ALT i key on the right may also be configured to work as a Meta key or may be configured as some other modifier, such as a Compose key for typing accented characters.
If you do not have a Meta or h
ALT i key, or another key working as a Meta key, the identical keystroke can be generated by typing h
ESC i first, and then typing h k i . Either process is known as metafying the h k i key.
The text M-C-k is read as ‘Meta-Control-k’ and describes the character produced by metafying C-k.
In addition, several keys have their own names. Specifically, h
DEL i
, h
ESC i
, h
LFD i
, h
SPC i
, h
RET i
, and h
TAB i all stand for themselves when seen in this text, or in an init file (see
Section 8.3 [Readline Init File], page 82 ). If your keyboard lacks a
h
LFD i key, typing h
C-j i will produce the desired character. The h
RET i key may be labeled h
Return i or h
Enter i on some keyboards.
8.2 Readline Interaction
Often during an interactive session you type in a long line of text, only to notice that the first word on the line is misspelled. The Readline library gives you a set of commands for manipulating the text as you type it in, allowing you to just fix your typo, and not forcing you to retype the majority of the line. Using these editing commands, you move the cursor to the place that needs correction, and delete or insert the text of the corrections. Then, when you are satisfied with the line, you simply press h
RET i
. You do not have to be at the end of the line to press h
RET i
; the entire line is accepted regardless of the location of the cursor within the line.
8.2.1 Readline Bare Essentials
In order to enter characters into the line, simply type them. The typed character appears where the cursor was, and then the cursor moves one space to the right. If you mistype a character, you can use your erase character to back up and delete the mistyped character.
80 Bash Reference Manual
Sometimes you may mistype a character, and not notice the error until you have typed several other characters. In that case, you can type C-b to move the cursor to the left, and then correct your mistake. Afterwards, you can move the cursor to the right with C-f.
When you add text in the middle of a line, you will notice that characters to the right of the cursor are ‘pushed over’ to make room for the text that you have inserted. Likewise, when you delete text behind the cursor, characters to the right of the cursor are ‘pulled back’ to fill in the blank space created by the removal of the text. A list of the bare essentials for editing the text of an input line follows.
C-b
Move back one character.
C-f
Move forward one character.
h
DEL i or h
Backspace i
Delete the character to the left of the cursor.
C-d
Delete the character underneath the cursor.
Printing characters
Insert the character into the line at the cursor.
C-_ or C-x C-u
Undo the last editing command. You can undo all the way back to an empty line.
(Depending on your configuration, the h
Backspace i key be set to delete the character to the left of the cursor and the h
DEL i key set to delete the character underneath the cursor, like
C-d, rather than the character to the left of the cursor.)
8.2.2 Readline Movement Commands
The above table describes the most basic keystrokes that you need in order to do editing of the input line. For your convenience, many other commands have been added in addition to C-b, C-f, C-d, and h
DEL i . Here are some commands for moving more rapidly about the line.
C-a
C-e
M-f
M-b
Move to the start of the line.
Move to the end of the line.
Move forward a word, where a word is composed of letters and digits.
Move backward a word.
C-l
Clear the screen, reprinting the current line at the top.
Notice how C-f moves forward a character, while M-f moves forward a word. It is a loose convention that control keystrokes operate on characters while meta keystrokes operate on words.
8.2.3 Readline Killing Commands
Killing text means to delete the text from the line, but to save it away for later use, usually by yanking (re-inserting) it back into the line. (‘Cut’ and ‘paste’ are more recent jargon for ‘kill’ and ‘yank’.)
Chapter 8: Command Line Editing 81
If the description for a command says that it ‘kills’ text, then you can be sure that you can get the text back in a different (or the same) place later.
When you use a kill command, the text is saved in a kill-ring. Any number of consecutive kills save all of the killed text together, so that when you yank it back, you get it all. The kill ring is not line specific; the text that you killed on a previously typed line is available to be yanked back later, when you are typing another line.
Here is the list of commands for killing text.
C-k
M-d
Mh
DEL i
Kill the text from the current cursor position to the end of the line.
Kill from the cursor to the end of the current word, or, if between words, to the end of the next word. Word boundaries are the same as those used by M-f.
Kill from the cursor the start of the previous word, or, if between words, to the start of the previous word. Word boundaries are the same as those used by
M-b.
C-w
Kill from the cursor to the previous whitespace. This is different than Mh
DEL i because the word boundaries differ.
Here is how to yank the text back into the line. Yanking means to copy the mostrecently-killed text from the kill buffer.
C-y
M-y
Yank the most recently killed text back into the buffer at the cursor.
Rotate the kill-ring, and yank the new top. You can only do this if the prior command is C-y or M-y.
8.2.4 Readline Arguments
You can pass numeric arguments to Readline commands. Sometimes the argument acts as a repeat count, other times it is the sign of the argument that is significant. If you pass a negative argument to a command which normally acts in a forward direction, that command will act in a backward direction. For example, to kill text back to the start of the line, you might type ‘M-- C-k’.
The general way to pass numeric arguments to a command is to type meta digits before the command. If the first ‘digit’ typed is a minus sign (‘-’), then the sign of the argument will be negative. Once you have typed one meta digit to get the argument started, you can type the remainder of the digits, and then the command. For example, to give the C-d command an argument of 10, you could type ‘M-1 0 C-d’, which will delete the next ten characters on the input line.
8.2.5 Searching for Commands in the History
Readline provides commands for searching through the command history (see
[Bash History Facilities], page 103 ) for lines containing a specified string. There are two
search modes: incremental and non-incremental.
Incremental searches begin before the user has finished typing the search string. As each character of the search string is typed, Readline displays the next entry from the history matching the string typed so far. An incremental search requires only as many characters as
82 Bash Reference Manual needed to find the desired history entry. To search backward in the history for a particular string, type C-r. Typing C-s searches forward through the history. The characters present in the value of the isearch-terminators variable are used to terminate an incremental search. If that variable has not been assigned a value, the h
ESC i and C-J characters will terminate an incremental search. C-g will abort an incremental search and restore the original line. When the search is terminated, the history entry containing the search string becomes the current line.
To find other matching entries in the history list, type C-r or C-s as appropriate. This will search backward or forward in the history for the next entry matching the search string typed so far. Any other key sequence bound to a Readline command will terminate the search and execute that command. For instance, a h
RET i will terminate the search and accept the line, thereby executing the command from the history list. A movement command will terminate the search, make the last line found the current line, and begin editing.
Non-incremental searches read the entire search string before starting to search for matching history lines. The search string may be typed by the user or be part of the contents of the current line.
8.3 Readline Init File
Although the Readline library comes with a set of Emacs-like keybindings installed by default, it is possible to use a different set of keybindings. Any user can customize programs that use Readline by putting commands in an inputrc file, conventionally in his home directory. The name of this file is taken from the value of the shell variable INPUTRC.
If that variable is unset, the default is ‘~/.inputrc’.
When a program which uses the Readline library starts up, the init file is read, and the key bindings are set.
In addition, the C-x C-r command re-reads this init file, thus incorporating any changes that you might have made to it.
8.3.1 Readline Init File Syntax
There are only a few basic constructs allowed in the Readline init file. Blank lines are ignored. Lines beginning with a ‘#’ are comments. Lines beginning with a ‘$’ indicate conditional constructs (see
Section 8.3.2 [Conditional Init Constructs], page 86
). Other lines denote variable settings and key bindings.
Variable Settings
You can modify the run-time behavior of Readline by altering the values of variables in Readline using the set command within the init file. The syntax is simple: set variable value
Here, for example, is how to change from the default Emacs-like key binding to use vi line editing commands: set editing-mode vi
Variable names and values, where appropriate, are recognized without regard to case.
Chapter 8: Command Line Editing 83
The bind -V command lists the current Readline variable names and values.
See
Section 4.2 [Bash Builtins], page 36 .
A great deal of run-time behavior is changeable with the following variables.
bell-style
Controls what happens when Readline wants to ring the terminal bell. If set to ‘none’, Readline never rings the bell. If set to
‘visible’, Readline uses a visible bell if one is available. If set to
‘audible’ (the default), Readline attempts to ring the terminal’s bell.
comment-begin
The string to insert at the beginning of the line when the insertcomment command is executed. The default value is "#".
completion-ignore-case
If set to ‘on’, Readline performs filename matching and completion in a case-insensitive fashion. The default value is ‘off’.
completion-query-items
The number of possible completions that determines when the user is asked whether he wants to see the list of possibilities. If the number of possible completions is greater than this value, Readline will ask the user whether or not he wishes to view them; otherwise, they are simply listed. This variable must be set to an integer value greater than or equal to 0. The default limit is 100.
convert-meta
If set to ‘on’, Readline will convert characters with the eighth bit set to an ascii key sequence by stripping the eighth bit and prefixing an h
ESC i character, converting them to a meta-prefixed key sequence.
The default value is ‘on’.
disable-completion
If set to ‘On’, Readline will inhibit word completion. Completion characters will be inserted into the line as if they had been mapped to self-insert. The default is ‘off’.
editing-mode
The editing-mode variable controls which default set of key bindings is used. By default, Readline starts up in Emacs editing mode, where the keystrokes are most similar to Emacs. This variable can be set to either ‘emacs’ or ‘vi’.
enable-keypad
When set to ‘on’, Readline will try to enable the application keypad when it is called. Some systems need this to enable the arrow keys.
The default is ‘off’.
expand-tilde
If set to ‘on’, tilde expansion is performed when Readline attempts word completion. The default is ‘off’.
84 Bash Reference Manual horizontal-scroll-mode
This variable can be set to either ‘on’ or ‘off’. Setting it to ‘on’ means that the text of the lines being edited will scroll horizontally on a single screen line when they are longer than the width of the screen, instead of wrapping onto a new screen line. By default, this variable is set to ‘off’.
input-meta
If set to ‘on’, Readline will enable eight-bit input (it will not clear the eighth bit in the characters it reads), regardless of what the terminal claims it can support. The default value is ‘off’. The name meta-flag is a synonym for this variable.
isearch-terminators
The string of characters that should terminate an incremental search without subsequently executing the character as a command
(see
Section 8.2.5 [Searching], page 81
). If this variable has not been given a value, the characters h
ESC i and C-J will terminate an incremental search.
keymap
Sets Readline’s idea of the current keymap for key binding commands.
Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard. The default value is emacs. The value of the editing-mode variable also affects the default keymap.
mark-directories
If set to ‘on’, completed directory names have a slash appended.
The default is ‘on’.
mark-modified-lines
This variable, when set to ‘on’, causes Readline to display an asterisk (‘*’) at the start of history lines which have been modified.
This variable is ‘off’ by default.
output-meta
If set to ‘on’, Readline will display characters with the eighth bit set directly rather than as a meta-prefixed escape sequence. The default is ‘off’.
print-completions-horizontally
If set to ‘on’, Readline will display completions with matches sorted horizontally in alphabetical order, rather than down the screen.
The default is ‘off’.
show-all-if-ambiguous
This alters the default behavior of the completion functions. If set to ‘on’, words which have more than one possible completion cause the matches to be listed immediately instead of ringing the bell.
The default value is ‘off’.
Chapter 8: Command Line Editing 85 visible-stats
If set to ‘on’, a character denoting a file’s type is appended to the filename when listing possible completions. The default is ‘off’.
Key Bindings
The syntax for controlling key bindings in the init file is simple. First you need to find the name of the command that you want to change. The following sections contain tables of the command name, the default keybinding, if any, and a short description of what the command does.
Once you know the name of the command, simply place on a line in the init file the name of the key you wish to bind the command to, a colon, and then the name of the command. The name of the key can be expressed in different ways, depending on what you find most comfortable.
In addition to command names, readline allows keys to be bound to a string that is inserted when the key is pressed (a macro).
The bind -p command displays Readline function names and bindings in a format that can put directly into an initialization file. See
keyname: function-name or macro keyname is the name of a key spelled out in English. For example:
Control-u: universal-argument
Meta-Rubout: backward-kill-word
Control-o: "> output"
In the above example, C-u is bound to the function universalargument, M-DEL is bound to the function backward-kill-word, and C-o is bound to run the macro expressed on the right hand side (that is, to insert the text ‘> output’ into the line).
A number of symbolic character names are recognized while processing this key binding syntax: DEL, ESC, ESCAPE, LFD, NEW-
LINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB.
"keyseq": function-name or macro keyseq differs from keyname above in that strings denoting an entire key sequence can be specified, by placing the key sequence in double quotes. Some gnu Emacs style key escapes can be used, as in the following example, but the special character names are not recognized.
"\C-u": universal-argument
"\C-x\C-r": re-read-init-file
"\e[11~": "Function Key 1"
In the above example, C-u is again bound to the function universal-argument (just as it was in the first example), ‘C-x
C-r’ is bound to the function re-read-init-file, and ‘ h
ESC i h
[ i h
1 i h
1 i h
~ i
’ is bound to insert the text ‘Function Key 1’.
The following gnu Emacs style escape sequences are available when specifying key sequences:
86 Bash Reference Manual
\Ccontrol prefix
\M-
\e
\\ meta prefix an escape character backslash h
" i
, a double quotation mark
\"
\’ h
’ i , a single quote or apostrophe
In addition to the gnu Emacs style escape sequences, a second set of backslash escapes is available:
\a
\b
\d
\f alert (bell) backspace delete form feed newline
\n
\r
\t
\v
\nnn carriage return horizontal tab vertical tab the character whose ascii code is the octal value nnn (one to three digits)
\xnnn the character whose ascii code is the hexadecimal value nnn (one to three digits)
When entering the text of a macro, single or double quotes must be used to indicate a macro definition. Unquoted text is assumed to be a function name. In the macro body, the backslash escapes described above are expanded. Backslash will quote any other character in the macro text, including ‘"’ and ‘’’. For example, the following binding will make ‘C-x \’ insert a single ‘\’ into the line:
"\C-x\\": "\\"
8.3.2 Conditional Init Constructs
Readline implements a facility similar in spirit to the conditional compilation features of the C preprocessor which allows key bindings and variable settings to be performed as the result of tests. There are four parser directives used.
$if
The $if construct allows bindings to be made based on the editing mode, the terminal being used, or the application using Readline. The text of the test extends to the end of the line; no characters are required to isolate it.
mode
The mode= form of the $if directive is used to test whether Readline is in emacs or vi mode. This may be used in conjunction with the
‘set keymap’ command, for instance, to set bindings in the emacsstandard and emacs-ctlx keymaps only if Readline is starting out in emacs mode.
Chapter 8: Command Line Editing 87 term
The term= form may be used to include terminal-specific key bindings, perhaps to bind the key sequences output by the terminal’s function keys. The word on the right side of the ‘=’ is tested against both the full name of the terminal and the portion of the terminal name before the first ‘-’. This allows sun to match both sun and sun-cmd, for instance.
application
The application construct is used to include application-specific settings. Each program using the Readline library sets the application name, and you can test for a particular value. This could be used to bind key sequences to functions useful for a specific program. For instance, the following command adds a key sequence that quotes the current or previous word in Bash:
$if Bash
# Quote the current or previous word
"\C-xq": "\eb\"\ef\""
$endif
This command, as seen in the previous example, terminates an $if command.
$endif
$else
Commands in this branch of the $if directive are executed if the test fails.
$include
This directive takes a single filename as an argument and reads commands and bindings from that file. For example, the following directive reads from
‘/etc/inputrc’:
$include /etc/inputrc
8.3.3 Sample Init File
Here is an example of an inputrc file. This illustrates key binding, variable assignment, and conditional syntax.
88 Bash Reference Manual
# This file controls the behaviour of line input editing for
# programs that use the Gnu Readline library.
Existing programs
# include FTP, Bash, and Gdb.
#
# You can re-read the inputrc file with C-x C-r.
# Lines beginning with ’#’ are comments.
#
# First, include any systemwide bindings and variable assignments from
# /etc/Inputrc
$include /etc/Inputrc
#
# Set various bindings for emacs mode.
set editing-mode emacs
$if mode=emacs
Meta-Control-h: backward-kill-word Text after the function name is ignored
#
# Arrow keys in keypad mode
#
#"\M-OD": backward-char
#"\M-OC":
#"\M-OA":
#"\M-OB":
# forward-char previous-history next-history
# Arrow keys in ANSI mode
#
"\M-[D": backward-char
"\M-[C":
"\M-[A":
"\M-[B": forward-char previous-history next-history
#
# Arrow keys in 8 bit keypad mode
#
#"\M-\C-OD":
#"\M-\C-OC":
#"\M-\C-OA": backward-char forward-char
#"\M-\C-OB":
# previous-history next-history
# Arrow keys in 8 bit ANSI mode
#
#"\M-\C-[D":
#"\M-\C-[C":
#"\M-\C-[A":
#"\M-\C-[B": backward-char forward-char previous-history next-history
Chapter 8: Command Line Editing 89
C-q: quoted-insert
$endif
# An old-style binding.
This happens to be the default.
TAB: complete
# Macros that are convenient for shell interaction
$if Bash
# edit the path
"\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f"
# prepare to type a quoted word -- insert open and close double quotes
# and move to just after the open quote
"\C-x\"": "\"\"\C-b"
# insert a backslash (testing backslash escapes in sequences and macros)
"\C-x\\": "\\"
# Quote the current or previous word
"\C-xq": "\eb\"\ef\""
# Add a binding to refresh the line, which is unbound
"\C-xr": redraw-current-line
# Edit variable on current line.
"\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
$endif
# use a visible bell if one is available set bell-style visible
# don’t strip characters to 7 bits when reading set input-meta on
# allow iso-latin1 characters to be inserted rather than converted to
# prefix-meta sequences set convert-meta off
# display characters with the eighth bit set directly rather than
# as meta-prefixed characters set output-meta on
# if there are more than 150 possible completions for a word, ask the
# user if he wants to see all of them set completion-query-items 150
# For FTP
$if Ftp
"\C-xg": "get \M-?"
"\C-xt": "put \M-?"
"\M-.": yank-last-arg
$endif
90 Bash Reference Manual
8.4 Bindable Readline Commands
This section describes Readline commands that may be bound to key sequences. You can list your key bindings by executing bind -P or, for a more terse format, suitable for an inputrc file, bind -p. (See
Section 4.2 [Bash Builtins], page 36 .) Command names without
an accompanying key sequence are unbound by default.
In the following descriptions, point refers to the current cursor position, and mark refers to a cursor position saved by the set-mark command. The text between the point and mark is referred to as the region.
8.4.1 Commands For Moving
beginning-of-line (C-a)
Move to the start of the current line.
end-of-line (C-e)
Move to the end of the line.
forward-char (C-f)
Move forward a character.
backward-char (C-b)
Move back a character.
forward-word (M-f)
Move forward to the end of the next word. Words are composed of letters and digits.
backward-word (M-b)
Move back to the start of the current or previous word. Words are composed of letters and digits.
clear-screen (C-l)
Clear the screen and redraw the current line, leaving the current line at the top of the screen.
redraw-current-line ()
Refresh the current line. By default, this is unbound.
8.4.2 Commands For Manipulating The History
accept-line (Newline or Return)
Accept the line regardless of where the cursor is. If this line is non-empty, add it to the history list according to the setting of the HISTCONTROL and HISTIGNORE variables. If this line is a modified history line, then restore the history line to its original state.
previous-history (C-p)
Move ‘back’ through the history list, fetching the previous command.
Chapter 8: Command Line Editing 91 next-history (C-n)
Move ‘forward’ through the history list, fetching the next command.
beginning-of-history (M-<)
Move to the first line in the history.
end-of-history (M->)
Move to the end of the input history, i.e., the line currently being entered.
reverse-search-history (C-r)
Search backward starting at the current line and moving ‘up’ through the history as necessary. This is an incremental search.
forward-search-history (C-s)
Search forward starting at the current line and moving ‘down’ through the the history as necessary. This is an incremental search.
non-incremental-reverse-search-history (M-p)
Search backward starting at the current line and moving ‘up’ through the history as necessary using a non-incremental search for a string supplied by the user.
non-incremental-forward-search-history (M-n)
Search forward starting at the current line and moving ‘down’ through the the history as necessary using a non-incremental search for a string supplied by the user.
history-search-forward ()
Search forward through the history for the string of characters between the start of the current line and the point. This is a non-incremental search. By default, this command is unbound.
history-search-backward ()
Search backward through the history for the string of characters between the start of the current line and the point. This is a non-incremental search. By default, this command is unbound.
yank-nth-arg (M-C-y)
Insert the first argument to the previous command (usually the second word on the previous line) at point. With an argument n, insert the nth word from the previous command (the words in the previous command begin with word 0). A negative argument inserts the nth word from the end of the previous command.
yank-last-arg (M-. or M-_)
Insert last argument to the previous command (the last word of the previous history entry). With an argument, behave exactly like yank-nth-arg. Successive calls to yank-last-arg move back through the history list, inserting the last argument of each line in turn.
92 Bash Reference Manual
8.4.3 Commands For Changing Text
delete-char (C-d)
Delete the character at point. If point is at the beginning of the line, there are no characters in the line, and the last character typed was not bound to delete-char, then return eof.
backward-delete-char (Rubout)
Delete the character behind the cursor. A numeric argument means to kill the characters instead of deleting them.
forward-backward-delete-char ()
Delete the character under the cursor, unless the cursor is at the end of the line, in which case the character behind the cursor is deleted. By default, this is not bound to a key.
quoted-insert (C-q or C-v)
Add the next character typed to the line verbatim. This is how to insert key sequences like C-q, for example.
self-insert (a, b, A, 1, !, ...)
Insert yourself.
transpose-chars (C-t)
Drag the character before the cursor forward over the character at the cursor, moving the cursor forward as well. If the insertion point is at the end of the line, then this transposes the last two characters of the line. Negative arguments have no effect.
transpose-words (M-t)
Drag the word before point past the word after point, moving point past that word as well.
upcase-word (M-u)
Uppercase the current (or following) word. With a negative argument, uppercase the previous word, but do not move the cursor.
downcase-word (M-l)
Lowercase the current (or following) word. With a negative argument, lowercase the previous word, but do not move the cursor.
capitalize-word (M-c)
Capitalize the current (or following) word. With a negative argument, capitalize the previous word, but do not move the cursor.
8.4.4 Killing And Yanking
kill-line (C-k)
Kill the text from point to the end of the line.
Chapter 8: Command Line Editing 93 backward-kill-line (C-x Rubout)
Kill backward to the beginning of the line.
unix-line-discard (C-u)
Kill backward from the cursor to the beginning of the current line.
kill-whole-line ()
Kill all characters on the current line, no matter where point is. By default, this is unbound.
kill-word (M-d)
Kill from point to the end of the current word, or if between words, to the end of the next word. Word boundaries are the same as forward-word.
backward-kill-word (Mh
DEL i )
Kill the word behind point. Word boundaries are the same as backward-word.
unix-word-rubout (C-w)
Kill the word behind point, using white space as a word boundary. The killed text is saved on the kill-ring.
delete-horizontal-space ()
Delete all spaces and tabs around point. By default, this is unbound.
kill-region ()
Kill the text in the current region. By default, this command is unbound.
copy-region-as-kill ()
Copy the text in the region to the kill buffer, so it can be yanked right away.
By default, this command is unbound.
copy-backward-word ()
Copy the word before point to the kill buffer. The word boundaries are the same as backward-word. By default, this command is unbound.
copy-forward-word ()
Copy the word following point to the kill buffer. The word boundaries are the same as forward-word. By default, this command is unbound.
yank (C-y)
Yank the top of the kill ring into the buffer at point.
yank-pop (M-y)
Rotate the kill-ring, and yank the new top. You can only do this if the prior command is yank or yank-pop.
8.4.5 Specifying Numeric Arguments
digit-argument (M-0, M-1, ... M--)
Add this digit to the argument already accumulating, or start a new argument.
M-- starts a negative argument.
94 Bash Reference Manual universal-argument ()
This is another way to specify an argument. If this command is followed by one or more digits, optionally with a leading minus sign, those digits define the argument. If the command is followed by digits, executing universal-argument again ends the numeric argument, but is otherwise ignored. As a special case, if this command is immediately followed by a character that is neither a digit or minus sign, the argument count for the next command is multiplied by four.
The argument count is initially one, so executing this function the first time makes the argument count four, a second time makes the argument count sixteen, and so on. By default, this is not bound to a key.
8.4.6 Letting Readline Type For You
complete ( h
TAB i
)
Attempt to perform completion on the text before point. The actual completion performed is application-specific. Bash attempts completion treating the text as a variable (if the text begins with ‘$’), username (if the text begins with
‘~’), hostname (if the text begins with ‘@’), or command (including aliases and functions) in turn. If none of these produces a match, filename completion is attempted.
possible-completions (M-?)
List the possible completions of the text before point.
insert-completions (M-*)
Insert all completions of the text before point that would have been generated by possible-completions.
menu-complete ()
Similar to complete, but replaces the word to be completed with a single match from the list of possible completions. Repeated execution of menu-complete steps through the list of possible completions, inserting each match in turn.
At the end of the list of completions, the bell is rung (subject to the setting of bell-style) and the original text is restored. An argument of n moves n positions forward in the list of matches; a negative argument may be used to move backward through the list. This command is intended to be bound to h
TAB i
, but is unbound by default.
delete-char-or-list ()
Deletes the character under the cursor if not at the beginning or end of the line
(like delete-char). If at the end of the line, behaves identically to possiblecompletions. This command is unbound by default.
complete-filename (M-/)
Attempt filename completion on the text before point.
possible-filename-completions (C-x /)
List the possible completions of the text before point, treating it as a filename.
Chapter 8: Command Line Editing 95 complete-username (M-~)
Attempt completion on the text before point, treating it as a username.
possible-username-completions (C-x ~)
List the possible completions of the text before point, treating it as a username.
complete-variable (M-$)
Attempt completion on the text before point, treating it as a shell variable.
possible-variable-completions (C-x $)
List the possible completions of the text before point, treating it as a shell variable.
complete-hostname (M-@)
Attempt completion on the text before point, treating it as a hostname.
possible-hostname-completions (C-x @)
List the possible completions of the text before point, treating it as a hostname.
complete-command (M-!)
Attempt completion on the text before point, treating it as a command name.
Command completion attempts to match the text against aliases, reserved words, shell functions, shell builtins, and finally executable filenames, in that order.
possible-command-completions (C-x !)
List the possible completions of the text before point, treating it as a command name.
dynamic-complete-history (Mh
TAB i
)
Attempt completion on the text before point, comparing the text against lines from the history list for possible completion matches.
complete-into-braces (M-{)
Perform filename completion and insert the list of possible completions enclosed within braces so the list is available to the shell (see
Section 3.5.1 [Brace Expansion], page 15
).
8.4.7 Keyboard Macros
start-kbd-macro (C-x ()
Begin saving the characters typed into the current keyboard macro.
end-kbd-macro (C-x ))
Stop saving the characters typed into the current keyboard macro and save the definition.
call-last-kbd-macro (C-x e)
Re-execute the last keyboard macro defined, by making the characters in the macro appear as if typed at the keyboard.
96 Bash Reference Manual
8.4.8 Some Miscellaneous Commands
re-read-init-file (C-x C-r)
Read in the contents of the inputrc file, and incorporate any bindings or variable assignments found there.
abort (C-g)
Abort the current editing command and ring the terminal’s bell (subject to the setting of bell-style).
do-uppercase-version (M-a, M-b, M-x, ...)
If the metafied character x is lowercase, run the command that is bound to the corresponding uppercase character.
prefix-meta ( h
ESC i
)
Metafy the next character typed. This is for keyboards without a meta key.
Typing ‘ h
ESC i f’ is equivalent to typing M-f.
undo (C-_ or C-x C-u)
Incremental undo, separately remembered for each line.
revert-line (M-r)
Undo all changes made to this line. This is like executing the undo command enough times to get back to the beginning.
tilde-expand (M-&)
Perform tilde expansion on the current word.
set-mark (C-@)
Set the mark to the point. If a numeric argument is supplied, the mark is set to that position.
exchange-point-and-mark (C-x C-x)
Swap the point with the mark. The current cursor position is set to the saved position, and the old cursor position is saved as the mark.
character-search (C-])
A character is read and point is moved to the next occurrence of that character.
A negative count searches for previous occurrences.
character-search-backward (M-C-])
A character is read and point is moved to the previous occurrence of that character. A negative count searches for subsequent occurrences.
insert-comment (M-#)
The value of the comment-begin variable is inserted at the beginning of the current line, and the line is accepted as if a newline had been typed. The default value of comment-begin causes this command to make the current line a shell comment.
Chapter 8: Command Line Editing 97 dump-functions ()
Print all of the functions and their key bindings to the Readline output stream.
If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.
dump-variables ()
Print all of the settable variables and their values to the Readline output stream.
If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.
dump-macros ()
Print all of the Readline key sequences bound to macros and the strings they output. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.
glob-expand-word (C-x *)
The word before point is treated as a pattern for pathname expansion, and the list of matching file names is inserted, replacing the word.
glob-list-expansions (C-x g)
The list of expansions that would have been generated by glob-expand-word is displayed, and the line is redrawn.
display-shell-version (C-x C-v)
Display version information about the current instance of Bash.
shell-expand-line (M-C-e)
Expand the line as the shell does. This performs alias and history expansion as well as all of the shell word expansions (see
Section 3.5 [Shell Expansions], page 15 ).
history-expand-line (M-^)
Perform history expansion on the current line.
magic-space ()
Perform history expansion on the current line and insert a space (see
[History Interaction], page 105 ).
alias-expand-line ()
Perform alias expansion on the current line (see
Section 6.6 [Aliases], page 67
).
history-and-alias-expand-line ()
Perform history and alias expansion on the current line.
insert-last-argument (M-. or M-_)
A synonym for yank-last-arg.
operate-and-get-next (C-o)
Accept the current line for execution and fetch the next line relative to the current line from the history for editing. Any argument is ignored.
98 Bash Reference Manual emacs-editing-mode (C-e)
When in vi editing mode, this causes a switch back to emacs editing mode, as if the command ‘set -o emacs’ had been executed.
8.5 Readline vi Mode
While the Readline library does not have a full set of vi editing functions, it does contain enough to allow simple editing of the line. The Readline vi mode behaves as specified in the posix 1003.2 standard.
In order to switch interactively between emacs and vi editing modes, use the ‘set -o emacs’ and ‘set -o vi’ commands (see
Section 4.3 [The Set Builtin], page 46
). The Readline default is emacs mode.
When you enter a line in vi mode, you are already placed in ‘insertion’ mode, as if you had typed an ‘i’. Pressing h
ESC i switches you into ‘command’ mode, where you can edit the text of the line with the standard vi movement keys, move to previous history lines with
‘k’ and subsequent lines with ‘j’, and so forth.
8.6 Programmable Completion
When word completion is attempted for an argument to a command for which a completion specification (a compspec) has been defined using the complete builtin (see
[Programmable Completion Builtins], page 99
), the programmable completion facilities are invoked.
First, the command name is identified. If a compspec has been defined for that command, the compspec is used to generate the list of possible completions for the word.
If the command word is a full pathname, a compspec for the full pathname is searched for first.
If no compspec is found for the full pathname, an attempt is made to find a compspec for the portion following the final slash.
Once a compspec has been found, it is used to generate the list of matching words. If a compspec is not found, the default Bash completion described above (see
[Commands For Completion], page 94
) is performed.
First, the actions specified by the compspec are used. Only matches which are prefixed by the word being completed are returned. When the ‘-f’ or ‘-d’ option is used for filename or directory name completion, the shell variable FIGNORE is used to filter the matches. See
Section 5.2 [Bash Variables], page 51 , for a description of FIGNORE.
Any completions specified by a filename expansion pattern to the ‘-G’ option are generated next. The words generated by the pattern need not match the word being completed.
The GLOBIGNORE shell variable is not used to filter the matches, but the FIGNORE shell variable is used.
Next, the string specified as the argument to the ‘-W’ option is considered. The string is first split using the characters in the IFS special variable as delimiters. Shell quoting is honored. Each word is then expanded using brace expansion, tilde expansion, parameter and variable expansion, command substitution, arithmetic expansion, and pathname expansion, as described above (see
Section 3.5 [Shell Expansions], page 15
). The results are split using the rules described above (see
Section 3.5.7 [Word Splitting], page 20
). The results of the
Chapter 8: Command Line Editing 99 expansion are prefix-matched against the word being completed, and the matching words become the possible completions.
After these matches have been generated, any shell function or command specified with the ‘-F’ and ‘-C’ options is invoked. When the command or function is invoked, the COMP_
LINE and COMP_POINT variables are assigned values as described above (see
Variables], page 51 ). If a shell function is being invoked, the COMP_WORDS and COMP_CWORD
variables are also set. When the function or command is invoked, the first argument is the name of the command whose arguments are being completed, the second argument is the word being completed, and the third argument is the word preceding the word being completed on the current command line. No filtering of the generated completions against the word being completed is performed; the function or command has complete freedom in generating the matches.
Any function specified with ‘-F’ is invoked first. The function may use any of the shell facilities, including the compgen builtin described below (see
Completion Builtins], page 99 ), to generate the matches. It must put the possible comple-
tions in the COMPREPLY array variable.
Next, any command specified with the ‘-C’ option is invoked in an environment equivalent to command substitution. It should print a list of completions, one per line, to the standard output. Backslash may be used to escape a newline, if necessary.
After all of the possible completions are generated, any filter specified with the ‘-X’ option is applied to the list. The filter is a pattern as used for pathname expansion; a ‘&’ in the pattern is replaced with the text of the word being completed. A literal ‘&’ may be escaped with a backslash; the backslash is removed before attempting a match. Any completion that matches the pattern will be removed from the list. A leading ‘!’ negates the pattern; in this case any completion not matching the pattern will be removed.
Finally, any prefix and suffix specified with the ‘-P’ and ‘-S’ options are added to each member of the completion list, and the result is returned to the Readline completion code as the list of possible completions.
If the previously-applied actions do not generate any matches, and the ‘-o dirnames’ option was supplied to complete when the compspec was defined, directory name completion is attempted.
By default, if a compspec is found, whatever it generates is returned to the completion code as the full set of possible completions. The default Bash completions are not attempted, and the Readline default of filename completion is disabled. If the ‘-o default’ option was supplied to complete when the compspec was defined, Readline’s default completion will be performed if the compspec generates no matches.
8.7 Programmable Completion Builtins
Two builtin commands are available to manipulate the programmable completion facilities.
compgen compgen [option] [word]
Generate possible completion matches for word according to the options, which may be any option accepted by the complete builtin with the exception of ‘-p’
100 Bash Reference Manual and ‘-r’, and write the matches to the standard output. When using the ‘-F’ or ‘-C’ options, the various shell variables set by the programmable completion facilities, while available, will not have useful values.
The matches will be generated in the same way as if the programmable completion code had generated them directly from a completion specification with the same flags. If word is specified, only those completions matching word will be displayed.
The return value is true unless an invalid option is supplied, or no matches were generated.
complete complete [-abcdefjkvu] [-o comp-option] [-A action] [-G globpat] [-
W wordlist]
[-P prefix] [-S suffix] [-X filterpat] [-F function]
[-C command] name [name ...] complete -pr [name ...]
Specify how arguments to each name should be completed. If the ‘-p’ option is supplied, or if no options are supplied, existing completion specifications are printed in a way that allows them to be reused as input. The ‘-r’ option removes a completion specification for each name, or, if no names are supplied, all completion specifications.
The process of applying these completion specifications when word completion is attempted is described above (see
Section 8.6 [Programmable Completion], page 98 ).
Other options, if specified, have the following meanings. The arguments to the ‘-G’, ‘-W’, and ‘-X’ options (and, if necessary, the ‘-P’ and ‘-S’ options) should be quoted to protect them from expansion before the complete builtin is invoked.
-o comp-option
The comp-option controls several aspects of the compspec’s behavior beyond the simple generation of completions. comp-option may be one of: default
Use readline’s default completion if the compspec generates no matches.
dirnames
Perform directory name completion if the compspec generates no matches.
filenames
Tell Readline that the compspec generates filenames, so it can perform any filename\-specific processing (like adding a slash to directory names or suppressing trailing spaces). This option is intended to be used with shell functions specified with ‘-F’.
-A action
The action may be one of the following to generate a list of possible completions:
Chapter 8: Command Line Editing 101 alias
Alias names. May also be specified as ‘-a’.
arrayvar
Array variable names.
binding
Readline key binding names (see
Readline Commands], page 90 ).
builtin
Names of shell builtin commands. May also be specified as ‘-b’.
command
Command names. May also be specified as ‘-c’.
directory
Directory names. May also be specified as ‘-d’.
disabled
Names of disabled shell builtins.
enabled
Names of enabled shell builtins.
export
Names of exported shell variables. May also be specified as ‘-e’.
file
File names. May also be specified as ‘-f’.
function
Names of shell functions.
helptopic
Help topics as accepted by the help builtin (see
Section 4.2 [Bash Builtins], page 36 ).
hostname
Hostnames, as taken from the file specified by the HOSTFILE shell variable (see
job
Job names, if job control is active. May also be specified as ‘-j’.
keyword
Shell reserved words. May also be specified as ‘-k’.
running
Names of running jobs, if job control is active.
setopt shopt
Valid arguments for the ‘-o’ option to the set builtin
(see
Section 4.3 [The Set Builtin], page 46 ).
Shell option names as accepted by the shopt builtin
(see
Section 4.2 [Bash Builtins], page 36
).
signal
Signal names.
stopped
Names of stopped jobs, if job control is active.
user
User names. May also be specified as ‘-u’.
variable
Names of all shell variables. May also be specified as
‘-v’.
-G globpat
The filename expansion pattern globpat is expanded to generate the possible completions.
102 Bash Reference Manual
-W wordlist
The wordlist is split using the characters in the IFS special variable as delimiters, and each resultant word is expanded. The possible completions are the members of the resultant list which match the word being completed.
-C command command is executed in a subshell environment, and its output is used as the possible completions.
-F function
The shell function function is executed in the current shell environment. When it finishes, the possible completions are retrieved from the value of the COMPREPLY array variable.
-X filterpat filterpat is a pattern as used for filename expansion. It is applied to the list of possible completions generated by the preceding options and arguments, and each completion matching filterpat is removed from the list. A leading ‘!’ in filterpat negates the pattern; in this case, any completion not matching filterpat is removed.
-P prefix prefix is added at the beginning of each possible completion after all other options have been applied.
-S suffix suffix is appended to each possible completion after all other options have been applied.
The return value is true unless an invalid option is supplied, an option other than ‘-p’ or ‘-r’ is supplied without a name argument, an attempt is made to remove a completion specification for a name for which no specification exists, or an error occurs adding a completion specification.
Chapter 9: Using History Interactively 103
9 Using History Interactively
This chapter describes how to use the gnu History Library interactively, from a user’s standpoint. It should be considered a user’s guide. For information on using the gnu
History Library in other programs, see the gnu Readline Library Manual.
9.1 Bash History Facilities
When the ‘-o history’ option to the set builtin is enabled (see
), the shell provides access to the command history, the list of commands previously typed. The value of the HISTSIZE shell variable is used as the number of commands to save in a history list. The text of the last $HISTSIZE commands (default 500) is saved. The shell stores each command in the history list prior to parameter and variable expansion but after history expansion is performed, subject to the values of the shell variables HISTIGNORE and HISTCONTROL.
When the shell starts up, the history is initialized from the file named by the HISTFILE variable (default ‘~/.bash_history’). The file named by the value of HISTFILE is truncated, if necessary, to contain no more than the number of lines specified by the value of the
HISTFILESIZE variable. When an interactive shell exits, the last $HISTSIZE lines are copied from the history list to the file named by $HISTFILE. If the histappend shell option is set
(see
Section 4.2 [Bash Builtins], page 36
), the lines are appended to the history file, otherwise the history file is overwritten. If HISTFILE is unset, or if the history file is unwritable, the history is not saved. After saving the history, the history file is truncated to contain no more than $HISTFILESIZE lines. If HISTFILESIZE is not set, no truncation is performed.
The builtin command fc may be used to list or edit and re-execute a portion of the history list. The history builtin may be used to display or modify the history list and manipulate the history file. When using command-line editing, search commands are available in each editing mode that provide access to the history list (see
The shell allows control over which commands are saved on the history list.
The
HISTCONTROL and HISTIGNORE variables may be set to cause the shell to save only a subset of the commands entered. The cmdhist shell option, if enabled, causes the shell to attempt to save each line of a multi-line command in the same history entry, adding semicolons where necessary to preserve syntactic correctness. The lithist shell option causes the shell to save the command with embedded newlines instead of semicolons. The shopt builtin is used to set these options. See
Section 4.2 [Bash Builtins], page 36 , for a description of shopt.
9.2 Bash History Builtins fc
Bash provides two builtin commands which manipulate the history list and history file.
fc [-e ename] [-nlr] [first] [last] fc -s [pat=rep] [command]
Fix Command. In the first form, a range of commands from first to last is selected from the history list. Both first and last may be specified as a string
104 Bash Reference Manual
(to locate the most recent command beginning with that string) or as a number
(an index into the history list, where a negative number is used as an offset from the current command number). If last is not specified it is set to first. If first is not specified it is set to the previous command for editing and
−16 for listing.
If the ‘-l’ flag is given, the commands are listed on standard output. The ‘-n’ flag suppresses the command numbers when listing. The ‘-r’ flag reverses the order of the listing. Otherwise, the editor given by ename is invoked on a file containing those commands. If ename is not given, the value of the following variable expansion is used: ${FCEDIT:-${EDITOR:-vi}}. This says to use the value of the FCEDIT variable if set, or the value of the EDITOR variable if that is set, or vi if neither is set. When editing is complete, the edited commands are echoed and executed.
In the second form, command is re-executed after each instance of pat in the selected command is replaced by rep.
A useful alias to use with the fc command is r=’fc -s’, so that typing ‘r cc’ runs the last command beginning with cc and typing ‘r’ re-executes the last command (see
Section 6.6 [Aliases], page 67 ).
history history [n] history -c history -d offset history [-anrw] [filename] history -ps arg
With no options, display the history list with line numbers. Lines prefixed with a ‘*’ have been modified. An argument of n lists only the last n lines. Options, if supplied, have the following meanings:
-c
Clear the history list. This may be combined with the other options to replace the history list completely.
-d offset
Delete the history entry at position offset. offset should be specified as it appears when the history is displayed.
-a
-n
Append the new history lines (history lines entered since the beginning of the current Bash session) to the history file.
Append the history lines not already read from the history file to the current history list. These are lines appended to the history file since the beginning of the current Bash session.
-r
-w
-p
-s
Read the current history file and append its contents to the history list.
Write out the current history to the history file.
Perform history substitution on the args and display the result on the standard output, without storing the results in the history list.
The args are added to the end of the history list as a single entry.
Chapter 9: Using History Interactively 105
When any of the ‘-w’, ‘-r’, ‘-a’, or ‘-n’ options is used, if filename is given, then it is used as the history file. If not, then the value of the HISTFILE variable is used.
9.3 History Expansion
The History library provides a history expansion feature that is similar to the history expansion provided by csh. This section describes the syntax used to manipulate the history information.
History expansions introduce words from the history list into the input stream, making it easy to repeat commands, insert the arguments to a previous command into the current input line, or fix errors in previous commands quickly.
History expansion takes place in two parts. The first is to determine which line from the history list should be used during substitution. The second is to select portions of that line for inclusion into the current one. The line selected from the history is called the event, and the portions of that line that are acted upon are called words. Various modifiers are available to manipulate the selected words. The line is broken into words in the same fashion that
Bash does, so that several words surrounded by quotes are considered one word. History expansions are introduced by the appearance of the history expansion character, which is
‘!’ by default. Only ‘\’ and ‘’’ may be used to escape the history expansion character.
Several shell options settable with the shopt builtin (see
option is enabled, and Readline is being used, history substitutions are not immediately passed to the shell parser. Instead, the expanded line is reloaded into the Readline editing buffer for further modification. If Readline is being used, and the histreedit shell option is enabled, a failed history expansion will be reloaded into the Readline editing buffer for correction. The ‘-p’ option to the history builtin command may be used to see what a history expansion will do before using it. The ‘-s’ option to the history builtin may be used to add commands to the end of the history list without actually executing them, so that they are available for subsequent recall. This is most useful in conjunction with
Readline.
The shell allows control of the various characters used by the history expansion mechanism with the histchars variable.
9.3.1 Event Designators
!
!n
!-n
!!
!string
An event designator is a reference to a command line entry in the history list.
Start a history substitution, except when followed by a space, tab, the end of the line, ‘=’ or ‘(’.
Refer to command line n.
Refer to the command n lines back.
Refer to the previous command. This is a synonym for ‘!-1’.
Refer to the most recent command starting with string.
106 Bash Reference Manual
!?string [?]
Refer to the most recent command containing string. The trailing ‘?’ may be omitted if the string is followed immediately by a newline.
^string1^string2^
Quick Substitution. Repeat the last command, replacing string1 with string2.
Equivalent to !!:s/string1/string2/.
!#
The entire command line typed so far.
9.3.2 Word Designators
Word designators are used to select desired words from the event. A ‘:’ separates the event specification from the word designator. It may be omitted if the word designator begins with a ‘^’, ‘$’, ‘*’, ‘-’, or ‘%’. Words are numbered from the beginning of the line, with the first word being denoted by 0 (zero). Words are inserted into the current line separated by single spaces.
For example,
!!
!!:$
!fi:2 designates the preceding command. When you type this, the preceding command is repeated in toto.
designates the last argument of the preceding command. This may be shortened to !$.
designates the second argument of the most recent command starting with the letters fi.
Here are the word designators:
0 (zero)
The 0th word. For many applications, this is the command word.
n The nth word.
^
$
The first argument; that is, word 1.
The last argument.
% x-y
* x* x-
The word matched by the most recent ‘?string?’ search.
A range of words; ‘-y’ abbreviates ‘0-y’.
All of the words, except the 0th. This is a synonym for ‘1-$’. It is not an error to use ‘*’ if there is just one word in the event; the empty string is returned in that case.
Abbreviates ‘x-$’
Abbreviates ‘x-$’ like ‘x*’, but omits the last word.
If a word designator is supplied without an event specification, the previous command is used as the event.
Chapter 9: Using History Interactively 107
9.3.3 Modifiers
p q t r
After the optional word designator, you can add a sequence of one or more of the following modifiers, each preceded by a ‘:’.
h
Remove a trailing pathname component, leaving only the head.
Remove all leading pathname components, leaving the tail.
Remove a trailing suffix of the form ‘.suffix’, leaving the basename.
e x
Remove all but the trailing suffix.
Print the new command but do not execute it.
Quote the substituted words, escaping further substitutions.
Quote the substituted words as with ‘q’, but break into words at spaces, tabs, and newlines.
s/old/new /
Substitute new for the first occurrence of old in the event line. Any delimiter may be used in place of ‘/’. The delimiter may be quoted in old and new with a single backslash. If ‘&’ appears in new, it is replaced by old. A single backslash will quote the ‘&’. The final delimiter is optional if it is the last character on the input line.
&
Repeat the previous substitution.
g
Cause changes to be applied over the entire event line. Used in conjunction with ‘s’, as in gs/old/new/, or with ‘&’.
108 Bash Reference Manual
Chapter 10: Installing Bash 109
10 Installing Bash
This chapter provides basic instructions for installing Bash on the various supported platforms. The distribution supports the gnu operating systems, nearly every version of
Unix, and several non-Unix systems such as BeOS and Interix. Other independent ports exist for ms-dos, os/2, Windows 95/98, and Windows nt.
10.1 Basic Installation
These are installation instructions for Bash.
The simplest way to compile Bash is:
1. cd to the directory containing the source code and type ‘./configure’ to configure
Bash for your system. If you’re using csh on an old version of System V, you might need to type ‘sh ./configure’ instead to prevent csh from trying to execute configure itself.
Running configure takes some time. While running, it prints messages telling which features it is checking for.
2. Type ‘make’ to compile Bash and build the bashbug bug reporting script.
3. Optionally, type ‘make tests’ to run the Bash test suite.
4. Type ‘make install’ to install bash and bashbug. This will also install the manual pages and Info file.
The configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a ‘Makefile’ in each directory of the package (the top directory, the ‘builtins’, ‘doc’, and ‘support’ directories, each directory under ‘lib’, and several others). It also creates a ‘config.h’ file containing system-dependent definitions. Finally, it creates a shell script named config.status that you can run in the future to recreate the current configuration, a file ‘config.cache’ that saves the results of its tests to speed up reconfiguring, and a file ‘config.log’ containing compiler output (useful mainly for debugging configure). If at some point ‘config.cache’ contains results you don’t want to keep, you may remove or edit it.
To find out more about the options and arguments that the configure script understands, type bash-2.04$ ./configure --help at the Bash prompt in your Bash source directory.
If you need to do unusual things to compile Bash, please try to figure out how configure could check whether or not to do them, and mail diffs or instructions to [email protected]
so they can be considered for the next release.
The file ‘configure.in’ is used to create configure by a program called Autoconf. You only need ‘configure.in’ if you want to change it or regenerate configure using a newer version of Autoconf. If you do this, make sure you are using Autoconf version 2.10 or newer.
If you need to change ‘configure.in’ or regenerate configure, you will need to create two files: ‘_distribution’ and ‘_patchlevel’. ‘_distribution’ should contain the major and minor version numbers of the Bash distribution, for example ‘2.01’. ‘_patchlevel’
110 Bash Reference Manual should contain the patch level of the Bash distribution, ‘0’ for example.
The script
‘support/mkconffiles’ has been provided to automate the creation of these files.
You can remove the program binaries and object files from the source code directory by typing ‘make clean’. To also remove the files that configure created (so you can compile
Bash for a different kind of computer), type ‘make distclean’.
10.2 Compilers and Options
Some systems require unusual options for compilation or linking that the configure script does not know about. You can give configure initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
On systems that have the env program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
The configuration process uses GCC to build Bash if it is available.
10.3 Compiling For Multiple Architectures
You can compile Bash for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of make that supports the VPATH variable, such as GNU make. cd to the directory where you want the object files and executables to go and run the configure script from the source directory. You may need to supply the ‘--srcdir=PATH’ argument to tell configure where the source files are.
configure automatically checks for the source code in the directory that configure is in and in ‘..’.
If you have to use a make that does not supports the VPATH variable, you can compile Bash for one architecture at a time in the source code directory. After you have installed Bash for one architecture, use ‘make distclean’ before reconfiguring for another architecture.
Alternatively, if your system supports symbolic links, you can use the ‘support/mkclone’ script to create a build tree which has symbolic links back to each file in the source directory.
Here’s an example that creates a build directory in the current directory from a source directory ‘/usr/gnu/src/bash-2.0’: bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
The mkclone script requires Bash, so you must have already built Bash for at least one architecture before you can create build directories for other architectures.
10.4 Installation Names
By default, ‘make install’ will install into ‘/usr/local/bin’, ‘/usr/local/man’, etc.
You can specify an installation prefix other than ‘/usr/local’ by giving configure the option ‘--prefix=PATH ’.
You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give configure the option ‘--exec-prefix=PATH ’,
‘make install’ will use PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
Chapter 10: Installing Bash 111
10.5 Specifying the System Type
There may be some features configure can not figure out automatically, but needs to determine by the type of host Bash will run on. Usually configure can figure that out, but if it prints a message saying it can not guess the host type, give it the ‘--host=TYPE’ option. ‘TYPE’ can either be a short name for the system type, such as ‘sun4’, or a canonical name with three fields: ‘CPU-COMPANY-SYSTEM’ (e.g., ‘sparc-sun-sunos4.1.2’).
See the file ‘support/config.sub’ for the possible values of each field.
10.6 Sharing Defaults
If you want to set default values for configure scripts to share, you can create a site shell script called config.site that gives default values for variables like CC, cache_ file, and prefix. configure looks for ‘PREFIX/share/config.site’ if it exists, then
‘PREFIX/etc/config.site’ if it exists. Or, you can set the CONFIG_SITE environment variable to the location of the site script. A warning: the Bash configure looks for a site script, but not all configure scripts do.
10.7 Operation Controls configure recognizes the following options to control how it operates.
--cache-file=file
Use and save the results of the tests in file instead of ‘./config.cache’. Set file to ‘/dev/null’ to disable caching, for debugging configure.
--help
Print a summary of the options to configure, and exit.
--quiet
--silent
-q
Do not print messages saying which checks are being made.
--srcdir=dir
Look for the Bash source code in directory dir. Usually configure can determine that directory automatically.
--version
Print the version of Autoconf used to generate the configure script, and exit.
configure also accepts some other, not widely used, boilerplate options. ‘configure
--help’ prints the complete list.
10.8 Optional Features
The Bash configure has a number of ‘--enable-feature’ options, where feature indicates an optional part of Bash. There are also several ‘--with-package’ options, where package is something like ‘bash-malloc’ or ‘purify’. To turn off the default use of a package, use ‘--without-package’. To configure Bash without a feature that is enabled by default, use ‘--disable-feature’.
Here is a complete list of the ‘--enable-’ and ‘--with-’ options that the Bash configure recognizes.
112 Bash Reference Manual
--with-afs
Define if you are using the Andrew File System from Transarc.
--with-bash-malloc
Use the Bash version of malloc in ‘lib/malloc/malloc.c’. This is not the same malloc that appears in gnu libc, but an older version derived from the
4.2 bsd malloc. This malloc is very fast, but wastes some space on each allocation. This option is enabled by default. The ‘NOTES’ file contains a list of systems for which this should be turned off, and configure disables this option automatically for a number of systems.
--with-curses
Use the curses library instead of the termcap library. This should be supplied if your system has an inadequate or incomplete termcap database.
--with-glibc-malloc
Use the gnu libc version of malloc in ‘lib/malloc/gmalloc.c’. This is not the version of malloc that appears in glibc version 2, but a modified version of the malloc from glibc version 1. This is somewhat slower than the default malloc, but wastes less space on a per-allocation basis, and will return memory to the operating system under certain circumstances.
--with-gnu-malloc
A synonym for --with-bash-malloc.
--with-installed-readline
Define this to make Bash link with a locally-installed version of Readline rather than the version in ‘lib/readline’. This works only with Readline 4.1 and later versions.
--with-purify
Define this to use the Purify memory allocation checker from Rational Software.
--enable-minimal-config
This produces a shell with minimal features, close to the historical Bourne shell.
There are several ‘--enable-’ options that alter how Bash is compiled and linked, rather than changing run-time features.
--enable-profiling
This builds a Bash binary that produces profiling information to be processed by gprof each time it is executed.
--enable-static-link
This causes Bash to be linked statically, if gcc is being used. This could be used to build a version to use as root’s shell.
The ‘minimal-config’ option can be used to disable all of the following options, but it is processed first, so individual options may be enabled using ‘enable-feature’.
All of the following options except for ‘disabled-builtins’ and ‘xpg-echo-default’ are enabled by default, unless the operating system does not provide the necessary support.
Chapter 10: Installing Bash 113
--enable-alias
Allow alias expansion and include the alias and unalias builtins (see
Section 6.6 [Aliases], page 67 ).
--enable-arith-for-command
Include support for the alternate form of the for command that behaves like the C language for statement (see
Section 3.2.4 [Looping Constructs], page 9
).
--enable-array-variables
Include support for one-dimensional array shell variables (see
Section 6.7 [Arrays], page 67 ).
--enable-bang-history
Include support for csh-like history substitution (see
Section 9.3 [History Interaction], page 105
).
--enable-brace-expansion
Include csh-like brace expansion ( b{a,b}c
7→ bac bbc ). See
[Brace Expansion], page 15 , for a complete description.
--enable-command-timing
Include support for recognizing time as a reserved word and for displaying timing statistics for the pipeline following time (see
Section 3.2.2 [Pipelines], page 8
). This allows pipelines as well as shell builtins and functions to be timed.
--enable-cond-command
Include support for the [[ conditional command (see
--enable-directory-stack
Include support for a csh-like directory stack and the pushd, popd, and dirs builtins (see
Section 6.8 [The Directory Stack], page 68
).
--enable-disabled-builtins
Allow builtin commands to be invoked via ‘builtin xxx’ even after xxx has been disabled using ‘enable -n xxx’. See
Section 4.2 [Bash Builtins], page 36
, for details of the builtin and enable builtin commands.
--enable-dparen-arithmetic
Include support for the ((...)) command (see
Section 3.2.5 [Conditional Constructs], page 10 ).
--enable-extended-glob
Include support for the extended pattern matching features described above under
Section 3.5.8.1 [Pattern Matching], page 21 .
--enable-help-builtin
Include the help builtin, which displays help on shell builtins and variables (see
Section 4.2 [Bash Builtins], page 36 ).
--enable-history
Include command history and the fc and history builtin commands (see
Section 9.1 [Bash History Facilities], page 103
).
114 Bash Reference Manual
--enable-job-control
This enables the job control features (see
Chapter 7 [Job Control], page 75
), if the operating system supports them.
--enable-net-redirections
This enables the special handling of filenames of the form /dev/tcp/host/port and /dev/udp/host/port when used in redirections (see
Section 3.6 [Redirections], page 22
).
--enable-process-substitution
This enables process substitution (see
--enable-prompt-string-decoding
Turn on the interpretation of a number of backslash-escaped characters in the $PS1, $PS2, $PS3, and $PS4 prompt strings. See
, for a complete list of prompt string escape sequences.
--enable-progcomp
Enable the programmable completion facilities (see
). If Readline is not enabled, this option has no effect.
--enable-readline
Include support for command-line editing and history with the Bash version of the Readline library (see
Chapter 8 [Command Line Editing], page 79 ).
--enable-restricted
Include support for a restricted shell. If this is enabled, Bash, when called as rbash, enters a restricted mode. See
Section 6.10 [The Restricted Shell], page 71 , for a description of restricted mode.
--enable-select
Include the select builtin, which allows the generation of simple menus (see
Section 3.2.5 [Conditional Constructs], page 10 ).
--enable-usg-echo-default
A synonym for --enable-xpg-echo-default.
--enable-xpg-echo-default
Make the echo builtin expand backslash-escaped characters by default, without requiring the ‘-e’ option. This sets the default value of the xpg_echo shell option to on, which makes the Bash echo behave more like the version specified in the Single Unix Specification, version 2. See
The file ‘config-top.h’ contains C Preprocessor ‘#define’ statements for options which are not settable from configure. Some of these are not meant to be changed; beware of the consequences if you do. Read the comments associated with each definition for more information about its effect.
Appendix A: Reporting Bugs 115
Appendix A Reporting Bugs
Please report all bugs you find in Bash. But first, you should make sure that it really is a bug, and that it appears in the latest version of Bash that you have.
Once you have determined that a bug actually exists, use the bashbug command to submit a bug report. If you have a fix, you are encouraged to mail that as well! Suggestions and ‘philosophical’ bug reports may be mailed to [email protected]
or posted to the Usenet newsgroup gnu.bash.bug.
All bug reports should include:
• The version number of Bash.
• The hardware and operating system.
• The compiler used to compile Bash.
• A description of the bug behaviour.
• A short script or ‘recipe’ which exercises the bug and may be used to reproduce it.
bashbug inserts the first three items automatically into the template it provides for filing a bug report.
Please send all reports concerning this manual to [email protected]
.
116 Bash Reference Manual
Appendix B: Major Differences From The Bourne Shell 117
Appendix B Major Differences From The Bourne
Shell
Bash implements essentially the same grammar, parameter and variable expansion, redirection, and quoting as the Bourne Shell. Bash uses the posix 1003.2 standard as the specification of how these features are to be implemented. There are some differences between the traditional Bourne shell and Bash; this section quickly details the differences of significance. A number of these differences are explained in greater depth in previous sections.
This section uses the version of sh included in SVR4.2 as the baseline reference.
• Bash is posix-conformant, even where the posix specification differs from traditional sh behavior (see
Section 6.11 [Bash POSIX Mode], page 72 ).
• Bash has multi-character invocation options (see
Section 6.1 [Invoking Bash], page 59
).
• Bash has command-line editing (see
Chapter 8 [Command Line Editing], page 79
) and the bind builtin.
• Bash provides a programmable word completion mechanism (see
Section 8.6 [Programmable Completion], page 98
), and two builtin commands, complete and compgen, to manipulate it.
• Bash has command history (see
Section 9.1 [Bash History Facilities], page 103
) and the history and fc builtins to manipulate it.
• Bash implements csh-like history expansion (see
Section 9.3 [History Interaction], page 105
).
• Bash has one-dimensional array variables (see
), and the appropriate variable expansions and assignment syntax to use them. Several of the
Bash builtins take options to act on arrays. Bash provides a number of built-in array variables.
• The $’...’ quoting syntax, which expands ANSI-C backslash-escaped characters in the text between the single quotes, is supported (see
Section 3.1.2.4 [ANSI-C Quoting], page 6 ).
• Bash supports the $"..." quoting syntax to do locale-specific translation of the characters between the double quotes.
The ‘-D’, ‘--dump-strings’, and
‘--dump-po-strings’ invocation options list the translatable strings found in a script
(see
Section 3.1.2.5 [Locale Translation], page 7 ).
• Bash implements the ! keyword to negate the return value of a pipeline (see
Section 3.2.2 [Pipelines], page 8 ). Very useful when an if statement needs to act only if
a test fails.
• Bash has the time reserved word and command timing (see
Section 3.2.2 [Pipelines], page 8
). The display of the timing statistics may be controlled with the TIMEFORMAT variable.
• Bash implements the for (( expr1 ; expr2 ; expr3 )) arithmetic for command, similar to the C language (see
Section 3.2.4 [Looping Constructs], page 9
).
• Bash includes the select compound command, which allows the generation of simple menus (see
Section 3.2.5 [Conditional Constructs], page 10
).
• Bash includes the [[ compound command, which makes conditional testing part of the shell grammar (see
Section 3.2.5 [Conditional Constructs], page 10
).
118 Bash Reference Manual
• Bash includes brace expansion (see
Section 3.5.1 [Brace Expansion], page 15 ) and tilde
expansion (see
Section 3.5.2 [Tilde Expansion], page 16
).
• Bash implements command aliases and the alias and unalias builtins (see
• Bash provides shell arithmetic, the (( compound command (see
Section 3.2.5 [Conditional Constructs], page 10
), and arithmetic expansion (see
Section 6.5 [Shell Arithmetic], page 66 ).
• Variables present in the shell’s initial environment are automatically exported to child processes. The Bourne shell does not normally do this unless the variables are explicitly marked using the export command.
• Bash includes the posix pattern removal ‘%’, ‘#’, ‘%%’ and ‘##’ expansions to remove leading or trailing substrings from variable values (see
Section 3.5.3 [Shell Parameter
• The expansion ${#xx}, which returns the length of ${xx}, is supported (see
Section 3.5.3 [Shell Parameter Expansion], page 17
).
• The expansion ${var:offset[:length]}, which expands to the substring of var’s value of length length, beginning at offset, is present (see
Section 3.5.3 [Shell Parameter
• The expansion ${var/[/]pattern[/replacement]}, which matches pattern and replaces it with replacement in the value of var, is available (see
Section 3.5.3 [Shell Parameter
• The expansion ${!prefix}* expansion, which expands to the names of all shell variables whose names begin with prefix, is available (see
Section 3.5.3 [Shell Parameter
• Bash has indirect variable expansion using ${!word} (see
Section 3.5.3 [Shell Parameter
• Bash can expand positional parameters beyond $9 using ${num}.
• The posix $() form of command substitution is implemented (see
Section 3.5.4 [Command Substitution], page 19
), and preferred to the Bourne shell’s ‘‘ (which is also implemented for backwards compatibility).
• Bash has process substitution (see
Section 3.5.6 [Process Substitution], page 19 ).
• Bash automatically assigns variables that provide information about the current user (UID, EUID, and GROUPS), the current host (HOSTTYPE, OSTYPE, MACHTYPE, and
HOSTNAME), and the instance of Bash that is running (BASH, BASH_VERSION, and
BASH_VERSINFO). See
Section 5.2 [Bash Variables], page 51 , for details.
• The IFS variable is used to split only the results of expansion, not all words (see
Section 3.5.7 [Word Splitting], page 20
). This closes a longstanding shell security hole.
• Bash implements the full set of posix 1003.2 filename expansion operators, including character classes, equivalence classes, and collating symbols (see
• Bash implements extended pattern matching features when the extglob shell option is enabled (see
Section 3.5.8.1 [Pattern Matching], page 21
).
• It is possible to have a variable and a function with the same name; sh does not separate the two name spaces.
Appendix B: Major Differences From The Bourne Shell 119
• Bash functions are permitted to have local variables using the local builtin, and thus useful recursive functions may be written (see
Section 4.2 [Bash Builtins], page 36
).
• Variable assignments preceding commands affect only that command, even builtins and functions (see
Section 3.7.4 [Environment], page 27
). In sh, all variable assignments preceding commands are global unless the command is executed from the file system.
• Bash performs filename expansion on filenames specified as operands to input and output redirection operators (see
Section 3.6 [Redirections], page 22
).
• Bash contains the ‘<>’ redirection operator, allowing a file to be opened for both reading and writing, and the ‘&>’ redirection operator, for directing standard output and standard error to the same file (see
Section 3.6 [Redirections], page 22
).
• Bash treats a number of filenames specially when they are used in redirection operators
(see
Section 3.6 [Redirections], page 22
).
• Bash can open network connections to arbitrary machines and services with the redirection operators (see
Section 3.6 [Redirections], page 22
).
• The noclobber option is available to avoid overwriting existing files with output redirection (see
Section 4.3 [The Set Builtin], page 46
). The ‘>|’ redirection operator may be used to override noclobber.
• The Bash cd and pwd builtins (see
Section 4.1 [Bourne Shell Builtins], page 31
) each take ‘-L’ and ‘-P’ options to switch between logical and physical modes.
• Bash allows a function to override a builtin with the same name, and provides access to that builtin’s functionality within the function via the builtin and command builtins
(see
Section 4.2 [Bash Builtins], page 36
).
• The command builtin allows selective disabling of functions when command lookup is performed (see
Section 4.2 [Bash Builtins], page 36 ).
• Individual builtins may be enabled or disabled using the enable builtin (see
).
• The Bash exec builtin takes additional options that allow users to control the contents of the environment passed to the executed command, and what the zeroth argument to the command is to be (see
Section 4.1 [Bourne Shell Builtins], page 31
).
• Shell functions may be exported to children via the environment using export -f (see
Section 3.3 [Shell Functions], page 12
).
• The Bash export, readonly, and declare builtins can take a ‘-f’ option to act on shell functions, a ‘-p’ option to display variables with various attributes set in a format that can be used as shell input, a ‘-n’ option to remove various variable attributes, and
‘name=value’ arguments to set variable attributes and values simultaneously.
• The Bash hash builtin allows a name to be associated with an arbitrary filename, even when that filename cannot be found by searching the $PATH, using ‘hash -p’ (see
Section 4.1 [Bourne Shell Builtins], page 31 ).
• Bash includes a help builtin for quick reference to shell facilities (see
• The printf builtin is available to display formatted output (see
• The Bash read builtin (see
Section 4.2 [Bash Builtins], page 36
) will read a line ending in ‘\’ with the ‘-r’ option, and will use the REPLY variable as a default if no non-option
120 Bash Reference Manual arguments are supplied. The Bash read builtin also accepts a prompt string with the
‘-p’ option and will use Readline to obtain the line when given the ‘-e’ option. The read builtin also has additional options to control input: the ‘-s’ option will turn off echoing of input characters as they are read, the ‘-t’ option will allow read to time out if input does not arrive within a specified number of seconds, the ‘-n’ option will allow reading only a specified number of characters rather than a full line, and the ‘-d’ option will read until a particular character rather than newline.
• The return builtin may be used to abort execution of scripts executed with the . or source builtins (see
Section 4.1 [Bourne Shell Builtins], page 31 ).
• Bash includes the shopt builtin, for finer control of shell optional capabilities (see
Section 4.2 [Bash Builtins], page 36 ).
• Bash has much more optional behavior controllable with the set builtin (see
• The test builtin (see
Section 4.1 [Bourne Shell Builtins], page 31
) is slightly different, as it implements the posix algorithm, which specifies the behavior based on the number of arguments.
• The trap builtin (see
Section 4.1 [Bourne Shell Builtins], page 31
) allows a DEBUG pseudo-signal specification, similar to EXIT. Commands specified with a DEBUG trap are executed after every simple command. The DEBUG trap is not inherited by shell functions.
• The Bash type builtin is more extensive and gives more information about the names it finds (see
Section 4.2 [Bash Builtins], page 36
).
• The Bash umask builtin permits a ‘-p’ option to cause the output to be displayed in the form of a umask command that may be reused as input (see
• Bash implements a csh-like directory stack, and provides the pushd, popd, and dirs builtins to manipulate it (see
Section 6.8 [The Directory Stack], page 68
). Bash also makes the directory stack visible as the value of the DIRSTACK shell variable.
• Bash interprets special backslash-escaped characters in the prompt strings when interactive (see
Section 6.9 [Printing a Prompt], page 70 ).
• The Bash restricted mode is more useful (see
Section 6.10 [The Restricted Shell], page 71 ); the SVR4.2 shell restricted mode is too limited.
• The disown builtin can remove a job from the internal shell job table (see
[Job Control Builtins], page 76
) or suppress the sending of SIGHUP to a job when the shell exits as the result of a SIGHUP.
• The SVR4.2 shell has two privilege-related builtins (mldmode and priv) not present in
Bash.
• Bash does not have the stop or newgrp builtins.
• Bash does not use the SHACCT variable or perform shell accounting.
• The SVR4.2 sh uses a TIMEOUT variable like Bash uses TMOUT.
More features unique to Bash may be found in
Chapter 6 [Bash Features], page 59 .
Appendix B: Major Differences From The Bourne Shell 121
B.1 Implementation Differences From The SVR4.2 Shell
Since Bash is a completely new implementation, it does not suffer from many of the limitations of the SVR4.2 shell. For instance:
• Bash does not fork a subshell when redirecting into or out of a shell control structure such as an if or while statement.
• Bash does not allow unbalanced quotes. The SVR4.2 shell will silently insert a needed closing quote at EOF under certain circumstances. This can be the cause of some hardto-find errors.
• The SVR4.2 shell uses a baroque memory management scheme based on trapping
SIGSEGV. If the shell is started from a process with SIGSEGV blocked (e.g., by using the system() C library function call), it misbehaves badly.
• In a questionable attempt at security, the SVR4.2 shell, when invoked without the ‘-p’ option, will alter its real and effective uid and gid if they are less than some magic threshold value, commonly 100. This can lead to unexpected results.
• The SVR4.2 shell does not allow users to trap SIGSEGV, SIGALRM, or SIGCHLD.
• The SVR4.2 shell does not allow the IFS, MAILCHECK, PATH, PS1, or PS2 variables to be unset.
• The SVR4.2 shell treats ‘^’ as the undocumented equivalent of ‘|’.
• Bash allows multiple option arguments when it is invoked (-x -v); the SVR4.2 shell allows only one option argument (-xv). In fact, some versions of the shell dump core if the second argument begins with a ‘-’.
• The SVR4.2 shell exits a script if any builtin fails; Bash exits a script only if one of the posix 1003.2 special builtins fails, and only for certain failures, as enumerated in the posix 1003.2 standard.
• The SVR4.2 shell behaves differently when invoked as jsh (it turns on job control).
122 Bash Reference Manual
Index of Shell Builtin Commands 123
Index of Shell Builtin Commands
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G getopts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
:
: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[
[ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H hash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A alias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K kill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B bg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
bind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
builtin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L let . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
local . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C cd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
compgen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
continue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P popd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
printf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pushd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pwd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D declare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
dirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
disown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
readonly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
eval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
exec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F fc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
fg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shopt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
typeset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124 Bash Reference Manual
U ulimit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
umask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
unalias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
unset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W wait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index of Shell Reserved Words 125
Index of Shell Reserved Words
[
!
! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[[ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
done . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E elif . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
else . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
esac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
]
]] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
{
{ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
}
} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T then . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
U until . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W while . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
126 Bash Reference Manual
Parameter and Variable Index 127
Parameter and Variable Index
!
! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#
# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
$
$ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C
CDPATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COLUMNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
comment-begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMP_CWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMP_LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMP_POINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMP_WORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
completion-query-items . . . . . . . . . . . . . . . . . . . .
COMPREPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
convert-meta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*
* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D
DIRSTACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
disable-completion . . . . . . . . . . . . . . . . . . . . . . . . .
-
- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
?
? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E editing-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
enable-keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
expand-tilde . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
@
@ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F
FCEDIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FIGNORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FUNCNAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
_ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G
GLOBIGNORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0
0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A auto_resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B
BASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BASH_ENV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BASH_VERSINFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BASH_VERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
bell-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H histchars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HISTCMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HISTCONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HISTFILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HISTFILESIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HISTIGNORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HISTSIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
horizontal-scroll-mode . . . . . . . . . . . . . . . . . . . .
HOSTFILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOSTNAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOSTTYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
128 Bash Reference Manual
I
IFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IGNOREEOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
input-meta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INPUTRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
isearch-terminators . . . . . . . . . . . . . . . . . . . . . . . .
K keymap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L
LANG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LC_ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LC_COLLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LC_CTYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LC_MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LC_NUMERIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LINENO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
output-meta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P
PATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PIPESTATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PPID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROMPT_COMMAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R
RANDOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M
MACHTYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAILCHECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAILPATH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
mark-modified-lines . . . . . . . . . . . . . . . . . . . . . . . .
meta-flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S
SECONDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SHELLOPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SHLVL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
show-all-if-ambiguous . . . . . . . . . . . . . . . . . . . . .
T
TIMEFORMAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TMOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
OLDPWD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTARG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTERR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OSTYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
U
UID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V visible-stats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Function Index 129
Function Index
A abort (C-g) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
accept-line (Newline or Return) . . . . . . . . . . . .
alias-expand-line () . . . . . . . . . . . . . . . . . . . . . . .
E emacs-editing-mode (C-e) . . . . . . . . . . . . . . . . . . .
end-kbd-macro (C-x )) . . . . . . . . . . . . . . . . . . . . . .
end-of-history (M->) . . . . . . . . . . . . . . . . . . . . . . .
end-of-line (C-e) . . . . . . . . . . . . . . . . . . . . . . . . . .
exchange-point-and-mark (C-x C-x) . . . . . . . . .
B backward-char (C-b) . . . . . . . . . . . . . . . . . . . . . . . .
backward-delete-char (Rubout) . . . . . . . . . . . . .
backward-kill-line (C-x Rubout) . . . . . . . . . . .
backward-kill-word (Mh
DEL i) . . . . . . . . . . . . . .
backward-word (M-b) . . . . . . . . . . . . . . . . . . . . . . . .
beginning-of-history (M-<) . . . . . . . . . . . . . . . .
beginning-of-line (C-a) . . . . . . . . . . . . . . . . . . . .
F forward-backward-delete-char () . . . . . . . . . . .
forward-char (C-f) . . . . . . . . . . . . . . . . . . . . . . . . .
forward-search-history (C-s) . . . . . . . . . . . . . .
forward-word (M-f) . . . . . . . . . . . . . . . . . . . . . . . . .
G glob-expand-word (C-x *) . . . . . . . . . . . . . . . . . . .
glob-list-expansions (C-x g) . . . . . . . . . . . . . . .
C call-last-kbd-macro (C-x e) . . . . . . . . . . . . . . . .
capitalize-word (M-c) . . . . . . . . . . . . . . . . . . . . . .
character-search (C-]) . . . . . . . . . . . . . . . . . . . . .
character-search-backward (M-C-]) . . . . . . . . .
clear-screen (C-l) . . . . . . . . . . . . . . . . . . . . . . . . .
complete ( h
TAB i) . . . . . . . . . . . . . . . . . . . . . . . . . . .
complete-command (M-!) . . . . . . . . . . . . . . . . . . . . .
complete-filename (M-/) . . . . . . . . . . . . . . . . . . . .
complete-hostname (M-@) . . . . . . . . . . . . . . . . . . . .
complete-into-braces (M-{) . . . . . . . . . . . . . . . .
complete-username (M-~) . . . . . . . . . . . . . . . . . . . .
complete-variable (M-$) . . . . . . . . . . . . . . . . . . . .
copy-backward-word () . . . . . . . . . . . . . . . . . . . . . .
copy-forward-word () . . . . . . . . . . . . . . . . . . . . . . .
copy-region-as-kill () . . . . . . . . . . . . . . . . . . . . .
H history-and-alias-expand-line () . . . . . . . . . .
history-expand-line (M-^) . . . . . . . . . . . . . . . . . .
history-search-backward () . . . . . . . . . . . . . . . .
history-search-forward () . . . . . . . . . . . . . . . . . .
I insert-comment (M-#) . . . . . . . . . . . . . . . . . . . . . . .
insert-completions (M-*) . . . . . . . . . . . . . . . . . . .
insert-last-argument (M-. or M-_) . . . . . . . . . .
K kill-line (C-k) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kill-region () . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
kill-whole-line () . . . . . . . . . . . . . . . . . . . . . . . . .
kill-word (M-d) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D delete-char (C-d) . . . . . . . . . . . . . . . . . . . . . . . . . .
delete-char-or-list () . . . . . . . . . . . . . . . . . . . . .
delete-horizontal-space () . . . . . . . . . . . . . . . .
digit-argument (M-0, M-1, ... M--) . . . . . . . . .
display-shell-version (C-x C-v) . . . . . . . . . . .
do-uppercase-version (M-a, M-b, M-x, ...)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
downcase-word (M-l) . . . . . . . . . . . . . . . . . . . . . . . .
dump-functions () . . . . . . . . . . . . . . . . . . . . . . . . . .
dump-macros () . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
dump-variables () . . . . . . . . . . . . . . . . . . . . . . . . . .
dynamic-complete-history (Mh
TAB i) . . . . . . . .
M magic-space () . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
menu-complete () . . . . . . . . . . . . . . . . . . . . . . . . . . .
N next-history (C-n) . . . . . . . . . . . . . . . . . . . . . . . . .
non-incremental-forward-search-history (M-n)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
non-incremental-reverse-search-history (M-p)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130 Bash Reference Manual
O operate-and-get-next (C-o) . . . . . . . . . . . . . . . .
P possible-command-completions (C-x !) . . . . . .
possible-completions (M-?) . . . . . . . . . . . . . . . .
possible-filename-completions (C-x /) . . . . .
possible-hostname-completions (C-x @) . . . . .
possible-username-completions (C-x ~) . . . . .
possible-variable-completions (C-x $) . . . . .
prefix-meta ( h
ESC i) . . . . . . . . . . . . . . . . . . . . . . . .
previous-history (C-p) . . . . . . . . . . . . . . . . . . . . .
S self-insert (a, b, A, 1, !, ...) . . . . . . . . . . . .
set-mark (C-@) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shell-expand-line (M-C-e) . . . . . . . . . . . . . . . . . .
start-kbd-macro (C-x () . . . . . . . . . . . . . . . . . . . .
T tilde-expand (M-&) . . . . . . . . . . . . . . . . . . . . . . . . .
transpose-chars (C-t) . . . . . . . . . . . . . . . . . . . . . .
transpose-words (M-t) . . . . . . . . . . . . . . . . . . . . . .
Q quoted-insert (C-q or C-v) . . . . . . . . . . . . . . . . .
U undo (C-_ or C-x C-u) . . . . . . . . . . . . . . . . . . . . . . .
universal-argument () . . . . . . . . . . . . . . . . . . . . . .
unix-line-discard (C-u) . . . . . . . . . . . . . . . . . . . .
unix-word-rubout (C-w) . . . . . . . . . . . . . . . . . . . . .
upcase-word (M-u) . . . . . . . . . . . . . . . . . . . . . . . . . .
R re-read-init-file (C-x C-r) . . . . . . . . . . . . . . . .
redraw-current-line () . . . . . . . . . . . . . . . . . . . . .
reverse-search-history (C-r) . . . . . . . . . . . . . .
revert-line (M-r) . . . . . . . . . . . . . . . . . . . . . . . . . .
Y yank (C-y) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
yank-last-arg (M-. or M-_) . . . . . . . . . . . . . . . . .
yank-nth-arg (M-C-y) . . . . . . . . . . . . . . . . . . . . . . .
yank-pop (M-y) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Concept Index 131
Concept Index
A alias expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
arithmetic evaluation . . . . . . . . . . . . . . . . . . . . . . . .
arithmetic expansion . . . . . . . . . . . . . . . . . . . . . . . . .
arithmetic, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
expansion, brace . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
expansion, filename . . . . . . . . . . . . . . . . . . . . . . . . . .
expansion, parameter . . . . . . . . . . . . . . . . . . . . . . . .
expansion, pathname . . . . . . . . . . . . . . . . . . . . . . . . .
expansion, tilde . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
expressions, arithmetic . . . . . . . . . . . . . . . . . . . . . . .
expressions, conditional . . . . . . . . . . . . . . . . . . . . . .
B background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bash configuration . . . . . . . . . . . . . . . . . . . . . . . . . .
Bash installation. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bourne shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
brace expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
builtin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
filename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
filename expansion . . . . . . . . . . . . . . . . . . . . . . . . . . .
foreground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
functions, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C command editing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
command execution . . . . . . . . . . . . . . . . . . . . . . . . . .
command expansion . . . . . . . . . . . . . . . . . . . . . . . . .
command history . . . . . . . . . . . . . . . . . . . . . . . . . . .
command search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
command substitution . . . . . . . . . . . . . . . . . . . . . . .
command timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
commands, conditional . . . . . . . . . . . . . . . . . . . . . . .
commands, grouping . . . . . . . . . . . . . . . . . . . . . . . . .
commands, lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
commands, looping . . . . . . . . . . . . . . . . . . . . . . . . . . .
commands, pipelines . . . . . . . . . . . . . . . . . . . . . . . . . .
commands, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
commands, simple . . . . . . . . . . . . . . . . . . . . . . . . . . . .
comments, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
completion builtins . . . . . . . . . . . . . . . . . . . . . . . . . .
configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
control operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H history builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
history events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
history expansion . . . . . . . . . . . . . . . . . . . . . . . . . . .
history list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
History, how to use . . . . . . . . . . . . . . . . . . . . . . . . .
I identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
initialization file, readline . . . . . . . . . . . . . . . . . . . . .
installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
interaction, readline . . . . . . . . . . . . . . . . . . . . . . . . . .
interactive shell . . . . . . . . . . . . . . . . . . . . . . . . . .
J job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
job control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D directory stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
K kill ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
killing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E editing command lines . . . . . . . . . . . . . . . . . . . . . . .
environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
evaluation, arithmetic . . . . . . . . . . . . . . . . . . . . . . . .
event designators . . . . . . . . . . . . . . . . . . . . . . . . . . .
execution environment . . . . . . . . . . . . . . . . . . . . . . .
exit status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
,
expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
expansion, arithmetic . . . . . . . . . . . . . . . . . . . . . . . .
L localization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M matching, pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . .
metacharacter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
132 Bash Reference Manual
N name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
notation, readline . . . . . . . . . . . . . . . . . . . . . . . . . . . .
reserved word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
restricted shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
return status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O operator, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P parameter expansion . . . . . . . . . . . . . . . . . . . . . . . . .
parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
parameters, positional . . . . . . . . . . . . . . . . . . . . . . . .
parameters, special . . . . . . . . . . . . . . . . . . . . . . . . . .
pathname expansion . . . . . . . . . . . . . . . . . . . . . . . . .
pattern matching . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pipeline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POSIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POSIX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
process group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
process group ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
process substitution . . . . . . . . . . . . . . . . . . . . . . . . . .
programmable completion . . . . . . . . . . . . . . . . . . . .
prompting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S shell arithmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shell function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shell script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shell variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
shell, interactive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
signal handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
special builtin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
startup files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
suspending jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T tilde expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
token . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
V variable, shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
variables, readline . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q quoting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
quoting, ANSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
word splitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R
Readline, how to use . . . . . . . . . . . . . . . . . . . . . . . . .
redirection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Y yanking text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
What is Bash? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
What is a shell? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Basic Shell Features . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Shell Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1
Shell Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2
Quoting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.1
Escape Character . . . . . . . . . . . . . . . . . . . . . .
3.1.2.2
Single Quotes . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.3
Double Quotes . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.4
ANSI-C Quoting . . . . . . . . . . . . . . . . . . . . . . .
3.1.2.5
Locale-Specific Translation . . . . . . . . . . . . . .
3.1.3
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Shell Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.1
Simple Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.2
Pipelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.3
Lists of Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.4
Looping Constructs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.5
Conditional Constructs . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.6
Grouping Commands . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Shell Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4
Shell Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.1
Positional Parameters . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.2
Special Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5
Shell Expansions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.1
Brace Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.2
Tilde Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.3
Shell Parameter Expansion . . . . . . . . . . . . . . . . . . . . .
3.5.4
Command Substitution . . . . . . . . . . . . . . . . . . . . . . . .
3.5.5
Arithmetic Expansion . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.6
Process Substitution . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.7
Word Splitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.8
Filename Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.8.1
Pattern Matching . . . . . . . . . . . . . . . . . . . . .
3.5.9
Quote Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6
Redirections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.1
Redirecting Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.2
Redirecting Output . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.3
Appending Redirected Output . . . . . . . . . . . . . . . . . .
i
ii Bash Reference Manual
3.6.4
Redirecting Standard Output and Standard Error
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.5
Here Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6.6
Duplicating File Descriptors . . . . . . . . . . . . . . . . . . . .
3.6.7
Opening File Descriptors for Reading and Writing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7
Executing Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.1
Simple Command Expansion . . . . . . . . . . . . . . . . . . .
3.7.2
Command Search and Execution . . . . . . . . . . . . . . . .
3.7.3
Command Execution Environment . . . . . . . . . . . . . .
3.7.4
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.5
Exit Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7.6
Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8
Shell Scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Shell Builtin Commands . . . . . . . . . . . . . . . . . .
4.1
Bourne Shell Builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
Bash Builtin Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
The Set Builtin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4
Special Builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Shell Variables. . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1
Bourne Shell Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2
Bash Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Bash Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1
Invoking Bash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2
Bash Startup Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3
Interactive Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.1
What is an Interactive Shell? . . . . . . . . . . . . . . . . . . .
6.3.2
Is this Shell Interactive? . . . . . . . . . . . . . . . . . . . . . . . .
6.3.3
Interactive Shell Behavior . . . . . . . . . . . . . . . . . . . . . .
6.4
Bash Conditional Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5
Shell Arithmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6
Aliases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.7
Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.8
The Directory Stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.8.1
Directory Stack Builtins . . . . . . . . . . . . . . . . . . . . . . . .
6.9
Controlling the Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.10
The Restricted Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.11
Bash POSIX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 Job Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1
Job Control Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2
Job Control Builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3
Job Control Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Command Line Editing . . . . . . . . . . . . . . . . . . .
8.1
Introduction to Line Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2
Readline Interaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.1
Readline Bare Essentials . . . . . . . . . . . . . . . . . . . . . . .
8.2.2
Readline Movement Commands . . . . . . . . . . . . . . . . .
8.2.3
Readline Killing Commands . . . . . . . . . . . . . . . . . . . .
8.2.4
Readline Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.5
Searching for Commands in the History . . . . . . . . .
8.3
Readline Init File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3.1
Readline Init File Syntax . . . . . . . . . . . . . . . . . . . . . . .
8.3.2
Conditional Init Constructs . . . . . . . . . . . . . . . . . . . .
8.3.3
Sample Init File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4
Bindable Readline Commands . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4.1
Commands For Moving . . . . . . . . . . . . . . . . . . . . . . . .
8.4.2
Commands For Manipulating The History . . . . . . .
8.4.3
Commands For Changing Text . . . . . . . . . . . . . . . . .
8.4.4
Killing And Yanking . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4.5
Specifying Numeric Arguments . . . . . . . . . . . . . . . . .
8.4.6
Letting Readline Type For You . . . . . . . . . . . . . . . . .
8.4.7
Keyboard Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4.8
Some Miscellaneous Commands . . . . . . . . . . . . . . . . .
8.5
Readline vi Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.6
Programmable Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.7
Programmable Completion Builtins . . . . . . . . . . . . . . . . . . . . . .
9 Using History Interactively . . . . . . . . . . . . . . .
9.1
Bash History Facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2
Bash History Builtins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3
History Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3.1
Event Designators . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3.2
Word Designators . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3.3
Modifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Installing Bash . . . . . . . . . . . . . . . . . . . . . . . . .
10.1
Basic Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2
Compilers and Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.3
Compiling For Multiple Architectures . . . . . . . . . . . . . . . . . .
10.4
Installation Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.5
Specifying the System Type . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.6
Sharing Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.7
Operation Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.8
Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix A Reporting Bugs . . . . . . . . . . . . . . .
iii
iv Bash Reference Manual
Appendix B Major Differences From The Bourne
Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B.1
Implementation Differences From The SVR4.2 Shell . . . . .
Index of Shell Builtin Commands . . . . . . . . . . . .
Index of Shell Reserved Words . . . . . . . . . . . . . .
Parameter and Variable Index . . . . . . . . . . . . . . .
Function Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Concept Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
تنزيل
تم تحديث الرابط العام
رابط عام للمستند
إعلان
