null  null
Industrial Communication Products
6.2. CAN bus Introduction & Products
Speed & Distance
Arbitration
6
Fieldbus Solutions
The Controller Area Network (CAN) is a serial communication way, which efficiently supports distributed
real-time control with a very high level of security. It provides error process mechanisms and message
priority concepts. The features can improve the network reliability and transmission efficiency. Furthermore, CAN bus supplies the multi-master capabilities, and is especially suited for networking “intelligent”
devices as well as sensors and actuators within a system or sub-system.
2
Introduction
Selection Guide
E-mail: [email protected]
6-2-2
6-2-3
6-2-3
CF
6-2-4
Overview
Website: http://www.icpdas.com
Page
CAN bus Introduction & Products
Model Name
Description
CAN bus Converters
I-2532
CAN bus to Fiber Converter
1-port CAN bus to RS-232 Converter
I-7530
1-port CAN bus to RS-232/RS-485/RS-422 Converter
I-7530A
I-7531
CAN bus Isolated Repeater
I-7532
2-port CAN bus Bridge
I-7540D
Ethernet to CAN/RS-232/RS-485 Ports Converter
I-7565
USB to 1-port CAN bus Converter
I-7565-H1
High Speed USB to 1-port CAN bus Converter
I-7565-H2
High Speed USB to 2-port CAN bus Converter
Intelligent CAN bus Modules (For iP-8000, WP-8000, LP-8000...)
Intelligent 1-port CAN bus communication module with parallel bus
I-8120W
for WinPAC/LinPAC
Intelligent 1-port CAN bus communication module with serial bus
I-87120
for WinPAC/LinPAC/iPAC
CAN bus Communication Boards
PISO-CM100U-D
Intelligent 1-port CAN bus Universal PCI Interface Board
PISO-CM100U-T
2-port CAN bus PCI-104 Board
PCM-CAN200
2-port CAN bus PC-104+ Board
PCM-CAN200P
PISO-CAN200E-D
2-port CAN bus PCI Express x 1 Interface Board
PISO-CAN200E-T
PISO-CAN200U-D
2-port CAN bus Universal PCI Interface Board
PISO-CAN200U-T
PISO-CAN400U-D
4-port CAN bus Universal PCI Interface Board
PISO-CAN400U-T
6-2-1
CAN bus Product Showcase
6
CAN bus Converters
Fieldbus Solutions
ICP DAS provides all kinds of communication interfaces for CAN bus. There are RS-232, RS-485, RS-422,
Ethernet, USB and fiber interfaces for various CAN applications. Also, the CAN series bridge and repeater
are ICP DAS’s CAN series products to enhance the CAN applications flexibility.
CAN to Fiber Converter
I-2532 is a CAN to fiber optic converter that
secures data transmission by using fiber optic
transmission to provide immunity from EMI/RFI
interference, which is designed to extend high
CAN bus signals onto fiber optic cables.
Intelligent RS-232 to CAN Converter
I-2532 CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
DIP switch for 120 Ω terminator resistor of CAN bus
Watchdog inside
3 kV galvanic isolation
Fiber Port: ST (Multi-mode)
Wave Length: 850 nm
Fiber Cable: 50/125, 62.5/125, 100/140 μm
One CAN and one fiber channel
Configure CAN Baud by rotary switch
Intelligent RS-232/485/422 to CAN Converter
I-7530A is designed to unleash the power of
CAN bus via RS-232/485/422 communication
method. It correctly converts messages
between CAN and RS-232/485/422 networks.
I-7530A CR
2
CAN bus Introduction & Products
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
Jumper for 120 Ω terminator resistor of CAN bus
Watchdog inside
OEM for ISO 11898-3 standard (Low Speed Fault Tolerance)
3 kV galvanic isolation
One CAN, RS-232, RS-422, and RS-485 channels
Configure CAN and serial COM parameters by utility
Support transparent communication mode
Mount easily on DIN-Rail
2-port CAN bus bridge
I-7532 is a CAN bridge to coupling
different segments which can be different baud
rates. It also can isolate the electronic distance
between both sides. That can protect the
nodes of another side from the other.
CAN
CA
AN bus Product Showcase
A
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
Jumper for 120 Ω terminator resistor of CAN bus
Watchdog inside
3 kV galvanic isolation between two CAN channels
Two CAN channels
Configure CAN Baud of each channel by rotary switch
Up to 100 nodes on each CAN port
Removable terminal block
Mount easily on DIN-Rail
ICP DAS CO., LTD
I-7530 CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
Jumper for 120 Ω terminator resistor of CAN bus
Watchdog inside
OEM for ISO 11898-3 standard (Low Speed Fault Tolerance)
3 kV galvanic isolation
One CAN and RS-232 channels
Configure CAN and RS-232 parameters by utility
Support transparent communication mode
Mount easily on DIN-Rail
CAN bus isolated Repeater
I-7531 is a CAN repeater used to establish a
physical coupling of two or more segments of a
CAN bus system. Users can implement tree or
star topologies as well as for long drop lines
with I-7531. Connecting via I-7531.
I-7531 CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
Jumper for 120 Ω terminator resistor of CAN bus
Watchdog inside
3 kV galvanic isolation among the power supply and two CAN
channels
Two CAN channels
Auto-baud detection
up to 100 nodes on each CAN port
Removable terminal block
Mount easily on DIN-Rail
Ethernet to CAN/RS-232/RS-485 Converter
I-7532 CR
CF
C
F
6-2-2
I-7530 is designed to unleash the power of
CAN bus via RS-232 communication method. It
converts messages between CAN and RS-232
networks.
I-7540D is a solution that enables CAN
n e t w o r k s t o b e c o u p l e d t o g e t h e r ove r t h e
Internet/Ethernet, whereby remote monitoring
and control is possible. The I-7540D controls
networked communication and makes a
transparent CAN-based application interface
available to the user.
I-7540D CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
Jumper for 120 Ω terminator resistor of CAN bus
Watchdog inside
10/100 Base-T Ethernet port
1 kV galvanic isolation
One CAN, RS-232, RS-485 and Ethernet channels
Configure CAN, RS-232 and RS-485 parameters by web page
Provide max. 25 Ethernet clients connection
Support for Virtual COM technology
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Industrial Communication Products
USB to 1-port CAN Converter
High Speed USB to 1-port CAN bus Converter
I-7565 CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
Jumper for 120 Ω terminator resistor of CAN bus
Watchdog inside
Fully compliant with USB 1.1/2.0 (Full Speed)
3 kV galvanic isolation
Powered by USB port
One CAN and USB channels
Support Windows 98/ME/2000/XP and Linux drivers
Mount easily on DIN-Rail
I-7565-H1 is a cost-efficient device for coupling
one CAN channel to USB interface. With its
powerful 32-bit microcontroller, transmission
and reception processes can be controlled
loss-free.
OS Support: Window 98/2K/XP/Vista, Linux
I-7565-H1 CR
Fully compatible with the ISO 11898-2 standard
Compatible with CAN specification 2.0 parts A and B
No external power supply (powered by USB)
Integrated with one CAN bus interface
Programmable CAN bus baud rate from 5 kbps to 1 Mbps
Built-in jumper for 120 Ω terminal resister of CAN bus
2500 Vrms photo-coupler isolation on the CAN side
3 kV galvanic isolation among the power supply
Support CAN bus acceptance filter configuration
Provide configuration utility to transmit/receive CAN messages
Max. data flow for a single channel: 3000 fps (standard frame)
Removable terminal block, Mount easily on DIN-Rail
High Speed USB to 2-port CAN bus Converter
Standalone CAN Interface Expansion Module
I-7565-H2 is a cost-efficient device for coupling
two CAN channel to USB interface. With its
powerful 32-bit microcontroller, transmission
and reception processes can be controlled
loss-free.
OS Support: Window 98/2K/XP/Vista, Linux
I-8120W has one CAN communication port with
5-Pin screw terminal connector, and is useful
for a wide range of CAN applications. Users can
d e s i g n t h e va r i o u s a p p l i c a t i o n s b e t w e e n
different communication protocols. It supports
WinPAC-8000, LinPAC-8000, XPAC-8000 and
iPAC-8000 series.
I-7565-H2 CR
I-8120W CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
DIP switch for 120 Ω terminator resistor of CAN bus
Watchdog inside
3 kV galvanic isolation
One CAN channel expansion for WinCon-8000/LinCon-8000 series
main control unit
Provide C/C++ function libraries and demos
80 MHz 186 CPU inside
8 K DPRAM inside
Parallel bus communication with main unit
Intelligent CAN bus Modules
Standalone CAN Interface Expansion Module
Standalone CAN Interface Expansion Module
I-8120W has one CAN communication port with
5-Pin screw terminal connector, and is useful
for a wide range of CAN applications. Users can
d e s i g n t h e va r i o u s a p p l i c a t i o n s b e t w e e n
different communication protocols. It supports
WinPAC-8000, LinPAC-8000, XPAC-8000 and
iPAC-8000 series.
I-87120 is developed to expand the CAN
functions of ICP DAS products. However, the
user-defined firmware supported by I-87120
can help users to set up the specific
application
e a s i l y.
It
supports
WinPAC-8000, LinPAC-8000, XPAC-8000 and
iPAC-8000 series.
I-8120W CR
Website: http://www.icpdas.com
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
DIP switch for 120 Ω terminator resistor of CAN bus
Watchdog inside
3 kV galvanic isolation
One CAN channel expansion for LinCon-8000/LinCon-8000/I-8000
series main control unit
Provide C/C++ function libraries and demos
80 MHz 186 CPU inside
Serial bus communication with main unit
Allow user-designed firmware
E-mail: [email protected]
CF
C
F
CA
AN bus Product Showcase
A
CAN
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo couple isolation on the CAN side
DIP switch for 120 Ω terminator resistor of CAN bus
Watchdog inside
3 kV galvanic isolation
One CAN channel expansion for WinCon-8000/LinCon-8000 series
main control unit
Provide C/C++ function libraries and demos
80 MHz 186 CPU inside
8 K DPRAM inside
Parallel bus communication with main unit
I-87120 CR
2
CAN bus Introduction & Products
Fully compatible with the ISO 11898-2 standard
Compatible with CAN specification 2.0 parts A and B
No external power supply (powered by USB)
Integrated with two CAN bus interface
Programmable CAN bus baud rate from 5 kbps to 1 Mbps
Built-in jumper for 120 Ω terminal resister of CAN bus
2500 Vrms photo-coupler isolation on the CAN side
3 kV galvanic isolation among the power supply
Support CAN bus acceptance filter configuration
Provide configuration utility to transmit/receive CAN messages
Max. data flow for a single channel: 3000 fps (standard frame)
Removable terminal block, Mount easily on DIN-Rail
6
Fieldbus Solutions
I-7565 is a cost-effective device for connecting
the CAN bus to PC via the standard USB
interface.
6-2-3
CAN bus Product Showcase
6
CAN bus Communication Boards
Intelligent CAN Communication Board
Fieldbus Solutions
PISO-CM100U built-in 80186, 80 MHz, CPU
represents a very powerful CAN board to
process the real-time CAN messages providing
the open structure for users to program in it to
satisfy the high performance system.
OS Support: Windows 2K/XP/Vista
PISO-CM100U-D CR
PISO-CM100U-T CR
Universal PCI card, supports both 5 V and 3.3 V PCI bus
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo-couple isolation on the CAN side
Built-in jumper for 120 Ω terminator resistor of CAN bus
Comply with 33 MHz 32-bit 5 V (or universal) PCI bus
3 kV galvanic isolation
2/4 independent CAN ports
Direct memory mapping to the CAN controller
Provide VB, VC++, Delphi, Borland C++ builder demos
Support LabVIEW and DASYLab driver
PCI-104 CAN Communication Board
PCM-CAN200 has 2 independent CAN ports
with 9-Pin D-Sub connector compatible PCI-104
specification.
OS Support: Windows 2K/XP/Vista/CE
PCM-CAN200 CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo-couple isolation on the CAN side
Built-in jumper for 120 Ω terminator resistor of CAN bus
PCI-104 compliant
3 kV galvanic isolation
2/4 independent CAN ports
Direct memory mapping to the CAN controller
Provide VB, VC++, Delphi, Borland C++ builder demos
Support LabVIEW and DASYLab driver
PC-104+ CAN Communication Board
PCI Express CAN Communication Board
PCM-CAN200 has 2 independent CAN ports
with 9-Pin D-Sub connector compatible
PC-104+ specification.
OS Support: Windows 2K/XP/Vista/CE
PISO-CAN200E has 2 independent CAN
ports with 5-Pin screw terminal connector or
9-Pin D-Sub connector with PCI Express x 1
bus. Every CAN channel has isolation protection
circuit.
OS Support: Windows 2K/XP/Vista
PCM-CAN200P CR
PISO-CAN200E-D CR
PISO-CAN200E-T CR
2
CAN bus Introduction & Products
PC-104+ compliant
9-Pin D-Sub connector
Compatible with CAN specification 2.0 parts A and B
Fully compatible with ISO 11898-2 standard
Support CAN bard rate from 10 kbps to 1 Mbps
2500 Vrms photo-couple isolation on the CAN bus
Built-in jumper for 120 Ω terminator resistor of CAN bus
3 kV galvanic isolation
2 independent CAN ports
Direct memory mapping to the CAN controller
Provide VB, VC++, Delphi, BC++ demos
Driver support Windows 2K/XP/WinCE and Vista
Universal PCI CAN Communication Board
PISO-CAN200U with universal PCI interface has
two independent CAN bus communication ports
with 5-Pin screw terminal connector or 9-Pin
D-Sub connector.
OS Support: Windows 2K/XP/Vista
PISO-CAN200U-D CR
PISO-CAN200U-T CR
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo-couple isolation on the CAN side
Built-in jumper for 120 Ω terminator resistor of CAN bus
X1 link PCI Express
3 kV galvanic isolation
2 independent CAN channels
Direct memory mapping to the CAN controller
Provide VB, VC++, Delphi, Borland C++ builder demos
Support LabVIEW and DASYLab driver
Universal PCI CAN Communication Board
PISO-CAN400U with universal PCI interface has
four independent CAN bus communication
ports with 5-Pin screw terminal connector or
9-Pin D-Sub connector.
OS Support: Windows 2K/XP/Vista
PISO-CAN400U-D CR
PISO-CAN400U-T CR
CAN
CA
AN bus Product Showcase
A
CF
C
F
6-2-4
Universal PCI card, supports both 5 V and 3.3 V PCI bus.
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo-couple isolation on the CAN side
Built-in jumper for 120 Ω terminator resistor of CAN bus
Comply with 33 MHz 32-bit 5 V universal PCI bus
3 kV galvanic isolation
2 independent CAN channels
Direct memory mapping to the CAN controller
Provide VB, VC++, Delphi, Borland C++ builder demos
Support LabVIEW and DASYLab driver
ICP DAS CO., LTD
Universal PCI card, supports both 5 V and 3.3 V PCI bus.
Compatible with CAN specification 2.0 parts A and B
Fully compatible with the ISO 11898-2 standard
Support several kinds of baud rate from 10 kbps to 1 Mbps
2500 Vrms photo-couple isolation on the CAN side
Built-in jumper for 120 Ω terminator resistor of CAN bus
Comply with 33 MHz 32-bit 5 V universal PCI bus
3 kV galvanic isolation
4 independent CAN channels
Direct memory mapping to the CAN controller
Provide VB, VC++, Delphi, Borland C++ builder demos
Support LabVIEW and DASYLab driver
Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement