Laboratory Furniture Catalogue

Laboratory Furniture Catalogue
Over 30 years of experience working for you
Provincial Lab Systems
QUALITY LABORATORY FURNITURE,
FUME HOODS AND WORK SURFACES
00
Index
Index
The Provincial Lab Systems’ story………………………………………………………………………………...…1
Provincial Lab Systems Quality Construction & Materials …….……………………………………….. 2
Bench Systems ……………………………………………………………………………………………………………… 3
Bench Type Configurations …………………………………………………………………………………………... 4
Base Cabinets ……………………………………………………………………………………………………………….. 5-8
Knee Spaces, Gables and Fillers ..………………………………………………………………………………….. 9
Wall Cabinets ………………………………………………………………………………………………………………...10, 11
Tables …………………………………………………………………………………………………………………………...15, 16
Shelving …...…………………………………………………………………………………………………………………...17
Pipe Chases and Drawer Slides ……………………………………………………………………………………...18
Hardware ………………………………………………………………………………………………………………………19, 20
Wood and Laminate Options Menus ……………………………………………………………………………..21-24
Freestanding Flammable and Acid Storage Cabinets ……………………………………………………..25
Work Surfaces ……………………………………………………………………………………………………………….26
Sinks……………………………………………………………………………………………………………………………….27
Service Fixtures ……………………………………………………………………………………………………………..28-35
Fume Hoods …………………………………………………………………………………………………………………..36-44
Laboratory Accessories ………………………………………………………………………………………………….45-46
Provincial Lab Systems Limited reserves the right
to change construction methods, materials, and
products without notice.
Provincial Lab Systems Limited
INDEX
Tall Storage Cabinets ……………………………………………………………………………………………………..12-14
The Provincial Lab Systems’ Story Over 30 years of experience working for you
supplier of quality laboratory furniture and institutional
casework. The wood furniture is manufactured at our
new facility located in the Burnside Industrial Park,
Dartmouth, Nova Scotia.
What is said about Provincial Lab Systems
I just wanted to take a moment to thank Provincial Lab Systems
for their tremendous work on the Hallmark Dental Laboratory
Fit-up.
David MacVicar/ Jetco Contracting Inc.
Your single source solution for all of
your laboratory furniture needs
The project looks good and I'm excited about it. We have
received many compliments all the way up from the “plant
manager".
Jamie Richards/ Michelin North America (Canada) Inc.
FSC® Certified:


Provincial Lab Systems Limited is certified for Forest Stewardship Council® Chain-of-Custody standards
promoting the responsible management of the world’s forests.
We are able to offer FSC® Certified and formaldehyde free materials that comply with the U.S. Green
Building Council’s LEED standards and are eligible for LEED credits.
Products:
Market segments are:











Wood, laminate, metal and stainless steel casework
Systems furniture and adjustable height tables
Laminate, phenolic, stainless steel and epoxy countertops
Fume hoods
Service fixtures, electrical raceways, safety showers/
eyewashes
Exhaust Arms
High Schools, Colleges & Universities
Pharmaceutical
Hospitals and Dental Labs
Industrial
Contract Furniture
Consultation and Design Services:


We can offer consultation and design services that are not currently
available at other institutional casework and millwork manufacturers.
This simplifies the construction process for our clients and therefore
provides an efficient single source solution for all your laboratory
furniture needs.
Our goal is to meet and exceed our customer’s quality and on time
delivery expectations, making PROVINCIAL LAB SYSTEMS
LIMITED a preferred supplier by both clients and the architectural
community.
Provincial Lab Systems Limited
THE PROVINCIAL LAB SYSTEMS’ STORY
Provincial Lab Systems Limited is a single source
1
Quality Construction & Materials
Quality Construction:
State-of-the-art machinery is used in the manufacturing process to ensure that our quality meets and
exceeds AWMAC/AWI/WI and SEFA standards.



The CNC provides increased cutting and machining capabilities due to its speed, accuracy, and
repeatability.
The boring and dowel inserter machine helps produce quality and accurate multiple dowel and glue
joint connections.
The case clamp greatly improves the accuracy of the assembly process and as important, increases
productivity .
Critical Lead Times:
We offer exceptional turn around times that separate ourselves from the larger
manufacturers.
Quality Wood Cabinet Materials and Hardware:
In today’s demanding laboratory environments, there are a number of quality cabinet materials and
hardware than can be offered by Provincial Lab Systems.

Veneers:


Melamines:
Laminates:





Cores:
Drawers:
Drawer slides:
Hinges:
Finish:
Grade A Plain sliced, rotary, and quarter cut veneers on all exterior
surfaces (Note: we use same species on the interior of the cabinets)
Tough impregnated resin surfaces
Plastic laminates in post forming, horizontal and vertical grade thicknesses,
regular and chemical resistant finishes
Particle core, MDF, veneer, NAUF, FSC, marine grade
Baltic birch or melamine w/ captured white hardboard drawer bottoms
3/4 extension and full extension, manual and self closing options
Concealed, and institutional 3 & 5 knuckle
Clear high performance chemical resistant System 7 catalyzed
vinyl finish (Stain finishes also available)
Customization:
All of our standard wood products can be customized to suit your particular
needs at a nominal cost without affecting lead times.
Quality Metal Casework:
At Provincial Lab Systems, not only can we offer quality wood
and laminate casework, we offer painted metal, and stainless
steel casework, all meeting SEFA standards. Our painted metal
cabinets can be finished to the exact colour of all fume hood
product line.
Provincial Lab Systems Limited
QUALITY CONSTRUCTION & MATERIALS
Provincial Lab Systems
2
Bench Systems
FixedPro Laboratory System
FlexPro Laboratory System
FlexPro laboratory system allow the cabinets
to slide under the counter surface, offering
the end user the greatest amount of
flexibility.
Counter surfaces are supported by a back
panel and gable system, maximizing the
selection of cabinets available to the end
user.
The FlexPro system can easily be added to or
modified with minimal cost and with virtually
no installation costs.
BENCH SYSTEMS
FixedPro laboratory system is the most
traditional and most cost effective system
used in laboratories currently.
Floor mounted cabinetry provides the support
for the counter surface, allowing for maximum
storage and superior weight capacity.
Modularity of this system ensures that future
expansion or renovation will pose little
problem for the end user.
LiftPro Laboratory System
LiftPro laboratory system similar to the
FlexPro system supports the counter surface
on back panels and metal leg supports.
LiftPro cabinets are suspended from the
floor, and offers the most flexibility to the
user who requires the ease of complete
reconfiguration.
LiftPro systems allows the easy removal of
leg frames and cabinets to be repositioned
as the end user requires.
Provincial Lab Systems Limited
3
BENCH TYPE 1
BENCH TYPE 2
BENCH TYPE 3
BENCH TYPE 4
BENCH TYPE 5
BENCH TYPE 6
BENCH TYPE 7
Provincial Lab Systems Limited
BENCH TYPE CONFIGURATIONS
Bench Type Configurations
4
Coding Reference Example:
B
100
15
Type
Model
Width
35
22
Height
Depth
Base Cabinet Coding Standards:
Type: B
Model: Product Model Number
Width: As Noted
Height: 35” (STD), 32” (ADA)
Depths: 22”(STD), 21”(STD -open units)
Shelves: As Shown
B 100 15
--
21
18
--
21
15
--
22
21
18
--
22
--
21
21
--
22
24
--
21
24
--
22
30
--
21
36
--
21
42
--
21
48
--
21
B 102 15
--
22
30
--
22
18
--
22
36
--
22
21
--
22
42
--
22
24
--
22
48
--
22
B 104 15
--
22
B 105 15
--
22
18
--
22
18
--
22
21
--
22
21
--
22
24
--
22
24
--
22
B 106 30
--
22
30
--
22
36
--
22
36
--
22
42
--
22
42
--
22
48
--
22
48
--
22
30
--
22
30
--
22
36
--
22
36
--
22
42
--
22
42
--
22
48
--
22
48
--
22
B 110 30
--
22
30
--
22
36
--
22
36
--
22
42
--
22
42
--
22
48
--
22
48
--
22
B
108
Provincial Lab Systems Limited
B 101
B 103
B 107
B 109
B 111
BASE CABINETS - Standing Height
Base Cabinets- Standing Height
5
Coding Reference
B
100
Type
Model
15
35
22
Width
Height
Depth
Base Cabinet Coding Standards:
Type: B
Model: Product Model Number
Width: As Noted
Height: 35” (STD), 32” (ADA)
Depths: 22”(STD), 21”(STD -open units)
Shelves: As Shown
B 112 30
--
22
36
--
42
30
--
22
22
36
--
22
--
22
42
--
22
48
--
22
48
--
22
B 114 30
--
22
30
--
22
36
--
22
36
--
22
42
--
22
42
--
22
48
--
22
48
--
22
B 116 15
--
22
30
--
22
18
--
22
36
--
22
21
--
22
42
--
22
24
--
22
48
--
22
B 118 30
--
22
30
--
22
36
--
22
36
--
22
42
--
22
42
--
22
48
--
22
48
--
22
B 120 15
--
22
18
--
22
18
--
22
21
--
22
21
--
22
24
--
22
24
--
22
B 122 18
--
22
36
--
22
21
--
22
42
--
22
24
--
22
48
--
22
Provincial Lab Systems Limited
B 113
B 115
B 117
B 119
B 121
B 123
BASE CABINETS - Standing Height
Base Cabinets - Standing Height
6
Coding Reference
B
100
Type
Model
15
35
22
Width
Height
Depth
Base Cabinet Coding Standards:
Type: B
Model: Product Model Number
Width: As Noted
Height: 35” (STD), 32” (ADA)
Depths: 22”(STD), 21”(STD -open units)
Shelves: As Shown
B 124
B 126
B 128
15
22
18
B 125
15
35
22
22
18
35
22
21
22
21
35
22
24
22
24
35
22
30
22
36
B 127
46
22
22
52
22
42
22
58
22
48
22
46
22
52
22
58
22
Metal Under Counter Flammable / Acid Storage Cabinets
FMC24L
Flammable Storage Cabinet
Single door left hand hinged
(24”w x 35”h x 18”d)
FMC24R
Flammable Storage Cabinet
Single door right hand hinged
(24”w x 35”h x 18”d)
FMC35
Flammable Storage Cabinet
Two door cabinet
(36”w x 35”h x 18”d)
(48”w x 35”h x 18”d)
SMA24L
Acid Storage Cabinet
Single door left hand hinged
(24”w x 35”h x 18”d)
SMA24R
Acid Storage Cabinet
Single door right hand hinged
(24”w x 35”h x 18”d)
SMA24L
Acid Storage Cabinet
Single door left hand hinged
(36”w x 35”h x 18”d)
(48”w x 35”h x 18”d)
Provincial Lab Systems Limited
BASE CABINETS - Standing Height
Sink Base Cabinets- Standing Height
7
Coding Reference
B
200
Type
Model
15
29
22
Width
Height
Depth
Base Cabinet Coding Standards:
Type: B
Model: Product Model Number
Width: As Noted
Height: 29” (STD),
Depths: 22”(STD), 21”(STD -open units)
Shelves: As Shown
B 200
B 202
B 204
B 206
B 208
B 210
15
29
21
B 201 15
29
22
18
29
21
18
29
22
21
29
21
21
29
22
24
29
21
24
29
22
30
29
21
36
29
21
42
29
21
48
29
21
15
29
22
B 203 30
29
22
18
29
22
36
29
22
21
29
22
42
29
22
24
29
22
48
29
22
15
29
22
15
29
22
18
29
22
18
29
22
21
29
22
21
29
22
24
29
22
24
29
22
30
29
22
B 207 15
29
22
36
29
22
18
29
22
42
29
22
21
29
22
48
29
22
24
29
22
30
29
22
B 209 30
29
22
36
29
22
36
29
22
42
29
22
42
29
22
48
29
22
48
29
22
30
29
22
B 211 18
29
22
36
29
22
21
29
22
42
29
22
24
29
22
48
29
22
Provincial Lab Systems Limited
B 205
BASE CABINETS - Sitting Height
Base Cabinets- Sitting Height
8
Type
Model
1
35
22
Width
Height
Depth
Knee Space Coding Standards:
Type: K,G, F
Model: Product Model Number
Width: As Noted
Height: 35” (STD), 32” (ADA), 29” (Low Ht), 84”H
Depths: 22”(STD), 21”(STD -open units)
Wall Heights: 12” ,15”, 18”, 21”, 24”,30”, 36”, 48”
Knee Spaces, Gables and Fillers
K 300 24 -- 21
K 301 24 -- 22
K 302 36 -- 22
30 -- 21
30 -- 22
42 -- 22
48 -- 22
36 -- 21
42 -- 21
48 -- 21
60 -- 21
K 303 24 -- 21
K 304 36 -- 21
30 -- 21
42 -- 21
72 -- 21
48 -- 21
G 700 22 -- .75
G 701 22 -- .75
G 702 46 -- .75
23 -- .75
23 -- .75
52 -- .75
29 -- .75
29 -- .75
58 -- .75
35 -- .75
35 -- .75
GABLE
ISLAND GABLE
NOTCHED GABLE
F 800
1
--
6
--
F 801
0-12
--
F 802 15 -- .75
12-24
--
18 -- .75
12 --
21 -- .75
48 --
24 -- .75
30 -- .75
BASE/TALL
FRONT FILLER
BASE/TALL/WALL
FINISHED
BACK PANEL
BASE/TALL
END FILLER
36 -- .75
42 -- .75
48 -- .75
F 803
1
--
1
--
2
--
2
6
--
6
F 804
12 --
BASE /TALL
CORNER FILLER
F 805
1
--
--
2
--
--
6
--
12 --
WALL
FRONT FILLER
Provincial Lab Systems Limited
KNEE SPACES, GABLES AND FILLERS
Coding Reference
F
300
12 --
WALL
CORNER FILLER
9
Coding Reference
W
400
Type
Model
15
30
13
Width
Height
Depth
Wall Cabinet Coding Standards:
Type: W
Model: Product Model Number
Width: As Noted
Height: 12” 15”, 18”, 21”, 24”,30”, 36”, 48”
Depths: 13”,16” (STD) , 12”, 15” (STD- Open units and sliding doors)
Shelves: 12” (0), 15”(0), 18” (0), 24” (1), 30” (2), 36” (2), 48” (3)
W 400 15
---
---
18
---
21
W 401
15
---
---
---
18
---
---
---
---
21
---
---
24
---
---
24
---
---
30
---
---
36
---
---
42
---
---
48
---
---
W 402 15
---
---
W 403 30
---
---
18
---
---
36
---
---
21
---
---
42
---
---
24
---
---
48
---
---
W 404 15
---
---
18
---
21
15
---
---
---
18
---
---
---
---
21
---
---
24
---
---
24
---
---
W 406 30
---
---
30
---
---
36
---
---
36
---
---
42
---
---
42
---
---
48
---
---
48
---
---
W 408 30
---
---
30
---
---
36
---
---
36
---
---
42
---
---
42
---
---
48
---
---
48
---
---
BLIND CORNER CABINET
Provincial Lab Systems Limited
W 405
W 407
W 409
WALL CABINETS
Wall Cabinets
BLIND CORNER CABINET
10
Coding Reference
W
400
Type
Model
15
30
13
Width
Height
Depth
Wall Cabinet Coding Standards:
Type: W
Model: Product Model Number
Width: As Noted
Height: 12”, 15”, 18”, 21”, 24”,30”, 36”, 48”
Depths: 13”,16” (STD) , 12”, 15” (STD- Open units and sliding doors)
Shelves: 12” (0), 15”(0), 18” (0), 24” (1), 30” (2), 36” (2), 48” (3)
W 410
30
---
---
36
---
42
48
30
---
---
---
36
---
---
---
---
42
---
---
---
---
48
---
---
BLIND CORNER CABINET
W 411
BLIND CORNER CABINET
13”
16”
13”
16”
”
14
PLAN VIEW OF CORNER CABINETS
W 412
30
---
---
W 413 30
---
---
36
---
---
36
---
---
42
---
---
42
---
---
48
---
---
48
---
---
SOLID DOOR CORNER CABINET
W 414
WALL CABINETS
Wall Cabinets
SOLID DOOR CORNER CABINET
30
---
---
36
---
42
48
30
---
---
---
36
---
---
---
---
42
---
---
---
---
48
---
---
FRAMED GLASS CORNER CABINET
Provincial Lab Systems Limited
W 415
FRAMED GLASS CORNER CABINET
11
Coding Reference
S
500
Type
Model
24
84
24
Width
Height
Depth
Storage Cabinet Coding Standards:
Type: S
Model: Product Model Number
Width: As Noted
Height: 84” (STD)
Depths: 13”,16”,24” (STD) , 12”, 15”,23” (STD- Open units)
Shelves: As Shown
S
S
S
15
84
---
---
18
84
---
84
---
21
84
---
24
84
---
24
84
---
30
84
---
36
84
---
42
84
---
48
84
---
502 15
84
---
18
84
---
21
84
---
24
84
---
500 15
84
---
18
84
21
504
S
S
503 30
84
---
36
84
---
42
84
---
48
84
---
505 15
84
---
15
84
---
18
84
---
18
84
---
21
84
---
21
84
---
24
84
---
24
84
---
Provincial Lab Systems Limited
S
501
TALL STORAGE CABINETS
Tall Storage Cabinets
12
Coding Reference
S
500
Type
Model
24
84
24
Width
Height
Depth
Storage Coding Standards:
Type: S
Model: Product Model Number
Width: As Noted
Height: 84” (STD)
Depths: 13”,16”, 24” (STD) , 12”, 15”, 23” (STD- Open units)
Shelves: As Shown
S
S
S
506
30
84
---
36
84
42
48
S
507
15
84
---
---
18
84
---
84
---
21
84
---
84
---
24
84
---
30
84
---
508 15
84
---
18
84
---
36
84
---
21
84
---
42
84
---
24
84
---
48
84
---
36
84
24
510
S
509
36
84
23
42
84
23
42
84
24
48
84
23
48
84
24
BARRIER FREE SAFETY STATION
Provincial Lab Systems Limited
S
511
TALL STORAGE CABINETS
Tall Storage Cabinets
SAFETY CABINET
13
Coding Reference
S
500
Type
Model
24
84
24
Width
Height
Depth
Storage Coding Standards:
Type: S
Model: Product Model Number
Width: As Noted
Height: 84”
Depths: 24” (STD)
Shelves: As Shown
S
512 15
84
24
18
84
21
24
S
513 15
84
24
24
18
84
24
84
24
21
84
24
84
24
24
84
24
CLOSET WITH COAT ROD
CLOSET WITH COAT ROD
S
514 30
84
24
36
84
42
48
30
84
24
24
36
84
24
84
24
42
84
24
84
24
48
84
24
CLOSET WITH COAT ROD AND SHELVES
S
516
S
515
CLOSET WITH COAT ROD AND SHELVES
30
84
24
36
84
42
48
517 30
84
24
24
36
84
24
84
24
42
84
24
84
24
48
84
24
CLOSET WITH COAT ROD & DRAWERS
Provincial Lab Systems Limited
S
TALL STORAGE CABINETS
Tall Storage Cabinets
CLOSET WITH COAT ROD & DRAWERS
14
Coding Reference
T
600
Type
Model
24
6
22
Width
Height
Depth
Tables Coding Standards:
Type: T
Model: Product Model Number
Width: As Noted
Height: 35” (STD), 32” (ADA), 29” (Low Ht)
Depths: 22”(STD), 28”
Solid wood legs come with levelers and black vinyl leg shoes.
T 600
T
T
T
T
T
602
604
605
607
609
24
5
--
30
5
--
36
5
--
42
5
--
48
5
--
60
5
--
36
5
--
42
5
--
48
5
--
36
6
--
42
6
--
48
6
--
22
--
--
28
--
--
34
--
--
40
--
--
46
--
--
34
--
--
40
--
--
46
--
--
34
--
--
40
--
--
46
--
--
Provincial Lab Systems Limited
T
T
T
T
601 24
5
--
30
5
--
603 24
6
--
30
6
--
606 22
--
--
28
--
--
608
22
--
--
28
--
--
TABLES
Tables
15
Coding Reference
T
600
Type
Model
Tables Coding Standards:
Type: T
Model: Product Model Number
Width: As Noted
Height: 35” (STD), 32” (ADA), 29”(Low Ht)
Depths: 22”(STD), 28”
Solid wood legs come with levelers and black vinyl leg shoes.
24
6
22
Width
Height
Depth
T
22
--
--
28
--
34
T
T
T
T
610
612
614
616
618
22
--
--
--
28
--
--
--
--
34
--
--
40
--
--
40
--
--
46
--
--
46
--
--
22
--
--
22
--
--
28
--
--
28
--
--
34
--
--
40
--
46
--
22
--
--
28
--
--
34
--
--
40
--
46
--
T
T
T
611
613
615 34
--
--
--
40
--
--
--
46
--
--
617 22
--
--
28
--
--
619 34
--
--
--
40
--
--
--
46
--
--
Provincial Lab Systems Limited
T
T
TABLES
Tables
16
Typical Shelving Units
ADJUSTABLE ISLAND SHELVING
FIXED REAGENT SHELVING AND END PIPE CHASE
Wood or laminate uprights or shelves.
ADJUSTABLE WALL SHELVING WITH BRACKETS
Metal shelf standards and shelf brackets with
wood or laminate shelves
TYPICAL SHELVING UNITS
Metal uprights and shelf brackets with wood
or laminate shelves.
For complete sizes and product offerings contact
Provincial Lab Systems.
Provincial Lab Systems Limited
17
WALL TYPE - 1 SIDED
WALL TYPE- 3 SIDED
CORNER TYPE
ISLAND TYPE
Pipe chases can be made in wood or laminate with removable panels to allow access to services.
Circumstances requiring pipe chases vary in dimensional requirements so pipe chase are all custom
made to accommodate specific project requirements.
Drawer Slides
Code: HDS001M
Metabox Drawer Slides
Finish: Painted Metal
Colour: Cream
Code: HDS002F
MetaFile Drawer System
Finish: Painted Metal
Colour: Cream
Code: HDS003U
Bottom mount drawer slide
Extension: Full or 3/4
Finish: Painted Metal
Colour: Cream
Code: HDS004S
Accuride drawer slide
Extension: 3/4” or Full
Finish: Zinc
Provincial Lab Systems Limited
PIPE CHASE AND DRAWER SLIDES
Pipe Chases
18
Pulls
Code: HD001
96mm D-Pull
Finish: Satin Chrome, Black or
Stainless Steel
Code: HD002
Flush Mounted Pull
Finish: Black or Chrome
Code: HD003
Bar Pull
Finish: Satin Chrome, Black or
Stainless Steel
Code: HGB110
Blum 110 degree concealed hinge
Finish: Nickel
Code: HGH003
Institutional 3 Knuckle Hinge
Finish: Nickel
Code: HGR005
Institutional 5 Knuckle Hinge
Finish: Satin Chrome, Stainless
Steel and Black
Catches and Locks
Code: HD004
Roller Catch
Code: HD005
Magnetic Catch and Plate
Code: HD007
Elbow Catch
Code: HD008
Cam lock with Striker Plate
HARDWARE
Hinges
Code: HD006
Sliding Glass Door Locks
*only required with pairs
of locking doors
Provincial Lab Systems Limited
19
Shelf Supports, Brackets and Standards
Code: HD011
Plastic Seismic Locking
Shelf Clip
Finish: Clear
Code: HD012
Metal Shelf Clip
Finish: Zinc
Code: HD014
Metal Shelf Brackets
Finish: Zinc
Code: HD015
Heavy Duty Metal Shelf Standard
Finish: Zinc
Code: HD013
Metal Shelf Standard
Finish: Zinc
Cabinets Supports and Accessories
Code: HD016
Cabinet Leveler
Finish: Zinc
Code: HD017
Caster, Rubber Wheel
Finish: Zinc
Available: Swivel (SW) or Fixed (FX)
HARDWARE
Code: HD010
Metal Shelf Support
Finish: Nickel
Code: HD018
Lockable Caster, Rubber Wheel
Finish: Zinc
Available : Swivel (SW) or Fixed (FX)
001
Code: HD019
Label Holder
Finish: Anochrome
Code: HD020
Number Plate
Finish: Aluminum
Provincial Lab Systems Limited
Code: HD021
Grommet
Finish: Black
Code: HD022
CPU Holder
Finish: Black
20
Provincial Lab Systems
Cabinet construction
Standard– Doweled
 Standard- Frameless and full overlay
 Optional– Intermediate rails
 Optional- Lipped door construction w/ top frame
Cabinet materials
Standard- regular
Optional- NAUF
Optional- FSC Certified
Cabinet veneer species and cut
Standard- birch- rotary cut (Cabinet fronts and cabinet body B/2)
Optional- red oak- plain sliced (Cabinet fronts AA/1 and cabinet body A/1)
Optional- maple- plain sliced (Cabinet fronts AA/1 and cabinet body A/1)
Other- specify_______________________
Cabinet body substrate- Door and drawer front substrate is always particle core to avoid warping
Standard- particle core
Optional- veneer core
Optional- MDF core
Other- specify_______________________
Cabinet base
Standard- unfinished separate veneer core ply
Optional- finished same as cabinet body
Wood finish- laboratory grade
Standard- clear
Optional- choice of 4 standard stains
Optional- stain to match customer sample
Door and drawer front grain direction
Standard- combination grain (horizontal on drawer fronts and vertical on door s)
Optional- vertical matched with both vertical on drawers and doors
Wood edgebanding
Standard- 3mm solid on cabinet fronts, and veneer on cabinet body and shelves
Optional- 3mm solid on cabinet fronts, and all cabinet body members and shelves
Drawer slide systems
Standard- Blum Metabox integral metal drawers slides
Optional- Blum 230M ¾ extension epoxy coated– bottom mount
 Optional- Blum 430E full extension epoxy coated– bottom mount
 Optional- Accuride 3832 full extension zinc
 Other- specify_____________________________
Provincial Lab Systems Limited
WOOD CASEWORK - OPTIONS MENU
Wood Casework Options Menu
21
Provincial Lab Systems
Drawer box construction
Standard- white melamine back/ bottom (Blum Metabox metal sides)
Optional- doweled white melamine/ white hardboard bottom
Optional- baltic birch/ white hardboard bottom
Type of pulls
Standard- 96mm wire- satin chrome
Optional - 96mm wire- stainless steel
Optional - flush metal black
Other – specify_________________________
Types of hinges
Standard- Hettich grade 1 three knuckle- nickel
Optional- Blum concealed 110° opening
Optional- heavy duty 5 knuckle- satin chrome
Optional- heavy duty 5 knuckle-stainless steel
Other – specify_________________________
Types of catches (only required when 5 knuckle hinges being used)
Standard- roller catch
Optional- magnetic catch
Types of shelf supports
Standard- steel pin type
Optional- plastic locking seismic type
Optional- surface mounted pilasters/ clips
Optional- recessed mounted pilasters/ clips
Other – specify_________________________
Locking requirements
Standard- none
Optional- 5 disc cam lock- keyed alike (no security panels)
Optional- 5 disc cam lock- keyed different with security panels
Other – specify_________________________
Glass Doors
Standard- laminated safety
Optional- tempered glass
Cabinet Levelers
 Standard- none
Optional- required
WOOD CASEWORK - OPTIONS MENU
Wood Casework Options Menu
Accessories
 Standard- none
Label holders- anochrome
Number plates (shipped loose for field installation)
Provincial Lab Systems Limited
22
Laminate Casework Options Menu
Cabinet construction
Standard– Doweled
 Standard- Frameless and full overlay
 Optional- Intermediate rails
Cabinet materials
Standard- regular
Optional- NAUF
Optional- FSC Certified
Cabinet body/ knee spaces/ open cabinets
Standard- Thermally Fused Melamine (TFM)
Optional- Regular High Pressure Laminate (HPL) on exposed ends areas
Optional- Chemical resistant High Pressure Laminate (HPL) on exposed areas only
Cabinet door and drawer fronts
Standard- Thermally Fused Melamine (TFM)
Optional- Regular High Pressure Laminate (HPL)
Optional- Chemical resistant High Pressure Laminate (HPL)
Cabinet body substrate- Door and drawer front substrate is always particle core to avoid warping
Standard- particle core
Optional- MDF core
Other- specify____________________________
Cabinet base
Standard- unfinished separate veneer core ply
Optional- finished same as cabinet body
Door and drawer front grain direction (when applicable)
Standard- combination grain (horizontal on drawer fronts and vertical on doors)
Optional- vertical matched with both vertical on drawers and doors
Cabinet edgebanding
Standard- 3mm pvc on cabinet fronts, and .5mm on cabinet body and shelves
Optional- 3mm pvc on cabinet fronts, and all cabinet body members and shelves
Optional- self edge laminate on cabinet body, door and drawer fronts
Drawer box construction
Standard- white melamine back/ bottom (Blum Metabox metal sides)
Optional- doweled white melamine/ white hardboard bottom
Optional- baltic birch/ white hardboard bottom
Drawer slide systems
Standard- Blum Metabox integral metal drawers slides
Optional- Blum 230M ¾ extension epoxy coated– bottom mount
Optional- Blum 430E full extension epoxy coated– bottom mount
Optional- Accuride 3832 full extension zinc
Other- specify_____________________________
Provincial Lab Systems Limited
LAMINATE CASEWORK - OPTIONS MENU
Provincial Lab Systems
23
Laminate Casework Options Menu
Type of pulls
Standard- 96mm wire- satin chrome
Optional - 96mm wire- stainless steel
Optional - flush metal black
Other – specify_________________________
Types of hinges
Standard- Hettich grade 1 three knuckle- nickel
Optional- Blum concealed 110° opening
Optional- heavy duty 5 knuckle- satin chrome
Optional- heavy duty 5 knuckle-stainless steel
Other – specify_________________________
Types of catches (only required when 5 knuckle hinges being used)
Standard- roller catch
Optional- magnetic catch
Types of shelf supports
Standard- steel pin type
Optional- plastic locking seismic type
Optional- surface mounted pilasters/ clips
Optional- recessed mounted pilasters/ clips
Other – specify_________________________
Locking requirements
Standard- none
Optional- 5 disc cam lock- keyed alike (no security panels)
Optional- 5 disc cam lock- keyed different with security panels
Other – specify_________________________
Glass Doors
Standard- laminated safety
Optional- tempered glass
Cabinet Levelers
 Standard- none
Optional- required
Accessories
 Standard- none
Label holders- anochrome
Number plates (shipped loose for field installation)
Provincial Lab Systems Limited
LAMINATE CASEWORK - OPTIONS MENU
Provincial Lab Systems
24
C30 Flammable Storage Cabinet
114 litre (30 gallon) capacity with 1 shelf
(44”w x 45”h x 19”d)
C45 Flammable Storage Cabinet
170 litre (45 gallon) capacity with 2 shelves
(44”w x 66”h x 19”d)
Metal flammable storage cabinets are constructed of 18 gauge steel and features double wall
construction. Features a 3 point locking system and 51mm (2”) threaded vents on each side. Additional
shelves are available.
FM approved- Designed in accordance with NFPA and OSHA standards.
A30 Metal Acid Storage Cabinet
A45 Metal Acid Storage Cabinet
- with 1 shelf
(44”w x 45”h x 19”d)
- with 2 adjustable shelves
(44”w x 66”h x 19”d)
Metal acid storage cabinets are constructed of 18 gauge steel, double wall construction with 51mm;
features a liquid tight spill well in bottom of cabinet and a 3 point locking system and threaded vents on
each side. Additional shelves are available.
FM approved- Designed in accordance with NFPA and OSHA standards.
FLAMMABLE AND ACID STORAGE CABINETS
Freestanding Flammable and Acid Storage Cabinets
For additional sizes and technical information please contact Provincial Lab Systems Ltd.
Provincial Lab Systems Limited
25
Work Surfaces
Chemical Resistant Laminate
Application:
Cost:
Edge Details:
Colour Range:
Areas requiring limited heat and chemical resistance
Least expensive material
Decorative, impact resistant PVC self edge laminate,
post-formed edge
Please contact Provincial Lab Systems for available
colour selection.
Epoxy Resin (shown with marine edge)
All areas requiring chemical and heat resistance
Mid-level
Flat, Marine (as shown), Beveled. Solid colour surface
1” or as specified
(optional colours subject to up-charge)
Phenolic Resin
Application:
Cost:
Edge Detail:
Thickness:
All areas requiring chemical and heat resistance
Mid-level
Polished black edge
3/4” - 1” as specified
Stainless Steel
Application:
Cost:
Types:
Sterile environments, including surgical rooms and
areas subject to radiation, fire and abrasion
High
304 stainless or 316 stainless steel
Butcher Block
Application:
Cost:
Material:
Finish:
Traditional surface for testing labs and industrial
facilities
High
Solid Maple unless otherwise specified
Oil or Clear Epoxy
WORK SURFACES
Application:
Cost:
Edge Detail:
Thickness:
Counter Surface Comparability Chart
Material
Chemical
Resistance
Chemical Resistant
Plastic Laminate
G
Epoxy Resin
Stain
Resistance
Heat
Resistance
Impact
Resistant
Moisture
Resistant
LEED
Qualifying
F
G
F
F
G
A
E
G
G
E
G
E
A
Phenolic Resin
E
G
G
E
G
G
A
Stainless Steel
E
E
G
E
E
E
n/a
Butcher Block
F
E
F
F
E
F
A
E- Excellent
Abrasion
Resistance
G- Good
Provincial Lab Systems Limited
F- Fair
A - Available
26
Stainless Steel Sinks
S6407/316-1 16” x 14” x 7” w/ crumb cup waste outlet
S6407/316-3 16” x 14” x 7” w/ 1 1/2” corner waste outlet
S6810/316-1 18” x 16” x 10” w/ crumb cup waste outlet
S6810/316-3 18” x 16” x 10” w/ 1 1/2” corner waste outlet
S6810/316-1 18” x 16” x 10” w/ crumb cup waste outlet
S6810/316-3 18” x 16” x 10” w/ 1 1/2” corner waste outlet
D6410/316-1 16” x 14” x 10” w/ crumb cup waste outlet
D6410/316-3 16” x 14” x 10” w/ 1 1/2” corner waste outlet
T316 Stainless Steel Self Rimming Cup Sinks
OC6/316 Oval 3” x 6” x 4 1/2”
RC5/316 Round 5” x 4 1/2”
RC6/316 Round 6” x 4 1/2”
T316 Stainless Steel Sink Tops and Counter Tops
L
W
Stainless steel sink tops and countertops are available in custom
sizes with seamless integrated sinks, drain boards and back
splashes. The sinks can also be manufactured to any size and
depth and are available with corner guards and overflows.
For pricing on a stainless steel sink tops and counters, please
contact Provincial Lab Systems.
Epoxy Resin Sinks
Epoxy Resin Drop-in Sink
D15 16” x 12” x
D25 18” x 15” x
D30 18” x 15” x
D55 25” x 15” x
8” w/ 1 1/2” corner waste outlet
8” w/ 1 1/2” corner waste outlet
11” w/ 1 1/2” corner waste outlet
10” w/ 1 1/2” corner waste outlet
Epoxy Resin Double Under-Mount
(2) D25 18” x 15” x 8” w/ 1 1/2” corner waste outlet
(2) D30 18” x 15” x 11” w/ 1 1/2” corner waste outlet
*Must use sink supports in cabinet below*
Epoxy Resin Cup Sink
STAINLESS STEEL / EPOXY SINKS
T316 Stainless Steel Self Rimming Sinks
Epoxy Resin DropIn Troughs
CS4R Oval
3” x 6” x 4”
Provincial Lab Systems Limited
Contact Provincial Lab
Systems for available sizes
27
Provincial Lab Systems offers a wide selection of valves for use in the laboratory. The selection of a valve
for any particular application depends upon many factors, including the working pressure of the service,
the degree of metering or control desired. This Valve Selection Guide is presented to assist in selecting the
most appropriate valve for any application. All fixtures meet CSA standards and our standard product line
is designed and manufactured to meet or exceed industry standards, including SEFA 7-1996
“Recommended Practice for Laboratory and Hospital Fixtures.
Provincial Lab Systems cannot be responsible for the results obtained from using any particular valve in
any particular application. In particular, reference must be made to applicable plumbing and piping codes,
life safety standards and project specifications when selecting valves.
Valve Selection Guide
Standard Needle Valve
Laboratory Ball Valve
Control
Handle
Test Pressure/Media
Maximum Working Pressure
CSA Certified for Natural Gas
Needle Point
Four Arm
225 PSI/Nit
150 PSI
Yes
Ball Valve
Lever
125 PSI/Air
75 PSI
Yes
Standard Needle Valve:
Laboratory Ball Valve :
Yes
Yes (St Steel only)
Yes (St Steel only; 15 PSI max)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes (specially clean)
Yes
Yes
Yes
Yes (specially clean)
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes (specially clean)
Yes
Yes
Yes
Yes (specially clean)
Yes
No
Yes
Compatibility by Service (Symbol):
Air (AIR)
Ammonia (NH3)
Acetylene (C2H2)
Argon (AR)
Butane (BUT)
Carbon Dioxide (CO2)
Carbon Monoxide (CO)
Compressed Air (CA)
Natural Gas (GAS)
Helium (HE)
Hydrogen (HYD)
Low Vacuum (LO VAC)
Methane (CH4)
Nitrogen (NIT)
Oxygen (OXY)
Propane (PRO)
Steam (Note 1)
Vacuum (VAC)
LABORATORY SERVICE FIXTURES
Valve Selection Guide
Note: 1. Steam service requires a valve with specialized internal construction only
Finishes:
Chrome, white and tan are standard finishes; Polished chrome with clear epoxy (slight upcharge); Satin
chrome with clear epoxy (slight upcharge); Satin nickel with clear epoxy (slight upcharge)
Provincial Lab Systems Limited
28
Single Water Faucets
L4800F-225WSA Panel/Overhead Carrier Mounted
L5100F-225WSA Panel/Overhead Carrier Mounted
Compression valve unit with replaceable stainless steel seat , serrated nozzle, fourarm handle with color-coded index disc, forged brass with polished chrome plated
finish, 3/8” NPT male inlet
L614VB Deck Mounted
Compression valve unit with replaceable stainless steel seat , vacuum breaker,
serrated nozzle, four-arm handle with color-coded index disc, forged brass with
polished chrome plated finish, 3/8” NPT male inlet, convertible rigid/swing gooseneck
L2714VB-WSA Wall Mounted
Compression valve unit with replaceable stainless steel seat , vacuum breaker,
serrated nozzle, four-arm handle with color-coded index disc, forged brass with
polished chrome plated finish, 3/8” NPT male inlet , convertible rigid/swing gooseneck
Mixing Water Faucets– Deck Mounted
L414VB Deck Mounted
Compression valve unit with replaceable stainless steel seat, vacuum breaker,
serrated nozzle, four-arm handle with color-coded index disc, forged brass with
polished chrome plated finish, 3/8” NPT male inlet, convertible rigid/swing gooseneck
L410VB Deck Mounted
LABORATORY SERVICE FIXTURES
Compression valve unit with replaceable stainless steel seat , serrated nozzle, fourarm handle with color-coded index disc, forged brass with polished chrome plated
finish, 3/8” NPT male inlet
Compression valve unit with replaceable stainless steel seat , vacuum breaker,
removable aerator, four-arm handle with color-coded index disc, forged brass with
polished chrome plated finish, 3/8” NPT male inlet, 9” swing spout
Provincial Lab Systems Limited
29
Mixing Water Faucets– Panel Mounted
Compression valve unit replaceable stainless steel seat, vacuum breaker, serrated
nozzle, four-arm handle with color-coded index disc, forged brass with polished
chrome plated finish, 3/8” NPT male inlet with vertical inlets on 3” centers, cold
water on bottom, convertible rigid/swing gooseneck
L514VB-WSA Panel Mounted
Compression valve unit with replaceable stainless steel seat, vacuum breaker,
serrated nozzle, four-arm handle with color-coded index disc, forged brass with
polished chrome plated finish, 3/8” NPT male inlet with horizontal inlets on 8”
centers, convertible rigid/swing gooseneck
Foot Operated Water Faucets
L3050 Foot-Operated Single Valve, Floor Mounted
Forged brass with polished chrome plated finish, self-closing renewable unit with
stainless steel valve stem. Forged brass pedal mounted on hinged bracket.
Inlet: 1/2” NPT female inlet (back) Outlet: 1/2” NPT female outlet (top)
L3001 Foot-Operated Mixing Valve, floor Mounted
L082VB-WSA Gooseneck, Deck Mounted
(for use with foot-operated valve)
Forged brass with polished chrome plated finish, vacuum breaker, serrated nozzle,
3/8” NPT male inlet, furnished complete with locknut and washer, convertible
rigid/swing gooseneck
Note: If tin-lining for use with pure water is required, add suffix “TL”.
LABORATORY SERVICE FIXTURES
L214VB-WS Panel Mounted
L074VB-WSA Gooseneck, Panel Mounted
(for use with foot-operated valve)
Forged brass with polished chrome plated finish, vacuum breaker, serrated nozzle,
3/8” NPT male inlet, furnished complete with locknut and washer, convertible
rigid/swing gooseneck
Note: If tin-lining for use with pure water is required, add suffix “TL”.
Provincial Lab Systems Limited
30
Pure Water Faucets
For distilled, deionized or reverse osmosis water
All components in contact with water have pure tin coating, body and gooseneck are
dipped in liquid tin to coat all interior surfaces, forged brass with polished chrome
plated finish, self-contained renewable unit with replaceable stainless steel seat, valve
has self-closing control, white nylon four-arm handle with color-coded index disc,
convertible rigid/swing gooseneck, 3/8” IPS male shank with 1/4” NPT male tailpiece,
furnished complete with locknut and washer
L2784WSA Pure Water Faucet, Tin-Lined Brass, Panel Mounted
For distilled, deionized or reverse osmosis water
All components in contact with water have pure tin coating, body and gooseneck are
dipped in liquid tin to coat all interior surfaces, forged brass with polished chrome
plated finish, self-contained renewable unit with replaceable stainless steel seat, valve
has self-closing control, white nylon four-arm handle with color-coded index disc,
convertible rigid/swing gooseneck, 1/2” NPT female inlet. Furnished complete with
mounting shank, locknut and washer
L7833 Pure Water Faucet, Polypropylene-Lined, Deck Mounted
For distilled, deionized or reverse osmosis water.
Faucet has exterior brass casing and interior lining of inert polypropylene, pure water
comes in contact only with inert plastic, forged brass with polished chrome plated
finish, diaphragm-type valve, brass valve stem and bonnet with inert elastomer
diaphragm, valve has manual on/off control, black nylon knurled handle with
color-coded index disc, 6” rigid brass riser, with seven serration plastic hose end, 3/8”
IPS male shank with 3/8” OD tube connection, furnished with 3/8” OD compression
adaptor for inlet
Note: L7833SC Same as above except with toggle-style handle and self-closing
Pre-Rinse Units
PR411 Deck Mounted
Compression valve units with replaceable stainless steel seats and integral check
valves, check valves prevent cross-mixing of hot and cold water self-closing squeeze
valve with rubber-bound spray head, insulated handle and locking ring, valve is
mounted on spring loaded 39” stainless steel hose, four-arm handle with color-coded
index disc, forged brass with polished chrome plated finish, 1 3/16” male shank with
(2) 3/8” OD flexible copper tubes, furnished complete with locknut and washer
LABORATORY SERVICE FIXTURES
L684 Pure Water Faucet, Tin-Lined Brass, Deck Mounted
PR611 Same as above except for cold water only
Provincial Lab Systems Limited
31
Pre-Rinse Units
Compression valve units with replaceable stainless steel seats and integral check valves,
check valves prevent cross-mixing of hot and cold water, self-closing squeeze valve with
rubber-bound spray head, insulated handle and locking ring, valve is mounted on spring
loaded 39” stainless steel hose, four-arm handle with color-coded index disc, forged
brass with polished chrome plated finish, 1 3/16” male shank with (2) 3/8” OD flexible
copper tubes, furnished complete with locknut and washer
Steam Valve Fixtures
L2892-131WSA Steam Valve Assembly, Deck Mounted
Straight pattern forged brass with polished chrome plated finish, globe valve design with
glass-filled TFE valve disc and stem packing, replaceable stainless steel seat,
heat-resistant black nylon four-arm handle with color-coded index disc, 3/8” IPS
mounting shank (assembled), locknut and washer, 3/8” NPT male inlet, removable angle
ten serration hose end
L2892-132AWSA Same as above except with two valves at 90 degrees
L2892-132SWSA Same as above except with two valves at 180 degrees
L2892-158WSA
Same as above except with single valve in panel mounted flange
L2892-146WSA
Same as above except with two valves in panel mounted wye fitting
L4892F-225WSA Steam Valve Assembly, Panel Mounted
Straight pattern forged brass with polished chrome plated finish, globe valve design with
glass-filled TFE valve disc and stem packing, replaceable stainless steel seat,
heat-resistant black nylon four-arm handle with color-coded index disc, 3/8” IPS
mounting shank (assembled), locknut and washer. 3/8” NPT male inlet, removable angle
ten serration hose end
L5190F-225WSA Steam Valve Assembly, Panel Mounted
LABORATORY SERVICE FIXTURES
PR1711WSA Panel Mounted
Angle pattern forged brass with polished chrome plated finish, globe valve design with
glass-filled TFE valve disc and stem packing, replaceable stainless steel seat,
heat-resistant black nylon four-arm handle with color-coded index disc, 3/8” NPT male
inlet, removable angle ten serration hose end
Provincial Lab Systems Limited
32
Needle Valve Fixtures
Deck mounted turret base with single outlet with straight pattern forged brass with
polished chrome plated finish, floating stainless steel needle and replaceable stainless
steel seat, forged brass four-arm handle with color-coded index disc, 3/8” IPS
mounting shank (assembled), locknut and washer, 3/8” NPT male inlet, removable ten
serration hose end
L2880-132AWSA Same as above except with two valves at 90 degrees
L2880-132SWSA Same as above except with two valves at 180 degrees
L4880F-225WSA Needle Valve Assembly, Panel Mounted
Straight pattern forged brass with polished chrome plated finish, floating stainless
steel needle and replaceable stainless steel seat
L2880-141WSA Same as above except with two valves in panel mounted wye
fitting
L5180F-225WSA Needle Valve Assembly, Panel Mounted
Angle pattern forged brass with polished chrome plated finish, floating stainless steel
needle and replaceable stainless steel seat, forged brass four-arm handle with colorcoded index disc, 3/8” IPS mounting shank (assembled), locknut and washer, 3/8” NPT
male inlet, removable ten serration hose end
Ball Valve Fixtures
L4200-131WSA Ball Valve Assembly, Deck Mounted
Forged brass with polished chrome plated finish, quarter-turn open/close with chrome
plated brass ball and molded TFE seals, chrome plated forged brass lever handle with
color-coded index disc, 3/8” IPS mounting shank (assembled), locknut and washer,
3/8” NPT male inlet, removable ten serration hose end
L4200-132AWSA Same as above except with two valves at 90 degrees
L4200-132SWSA Same as above except with two valves at 180 degrees.
L4200-158WSA Ball Valve Assembly, Panel Mounted
LABORATORY SERVICE FIXTURES
L2880-131WSA Needle Valve Assembly, Deck Mounted
Forged brass with polished chrome plated finish, Quarter-turn open/close with chrome
plated brass ball and moulded TFE seals, Chrome plated forged brass lever handle with
color-coded index disc, 3/8” IPS mounting shank, locknut and washer, Removable ten
serration hose end
L4200-141WSA Same as above except with two valves in panel mounted wye
fitting
Provincial Lab Systems Limited
33
Safety Equipment
Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control
and filter to remove impurities from the water flow, 1/2" IPS chrome plated brass
stay-open ball valve, valve is US-made with chrome plated brass ball and Teflon® seals,
unit may be mounted on right side (EW806) or left side (EW806LH) of sink, furnished
with locknut and washer for securing unit to countertop, polished chrome plated brass,
1/2" NPT male inlet, ANSI-compliant identification sign
EW810 Eyewash, Recess Deck Mounted, Push-Down Valve
Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control
and filter to remove impurities from the water flow, 1/2" IPS brass stay-open ball valve
mounted below counter and activated by push-down knob, 13" diameter flanged
stainless steel bowl for recessed mounting in countertop, furnished with all hardware
necessary for installation in counter, 1/2" NPT male inlet & 1 1/4" NPT female outlet,
ANSI-compliant identification sign
EW1022 Eyewash/Drench Hose Unit, Deck Mounted
Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover,
internal flow control and filter to remove impurities from the water flow, forged brass
squeeze valve activated by stainless steel lever handle, valve has replaceable stainless
steel seat for exceptional durability, locking clip engages when handle is depressed,
providing “hands free” operation, valve stays open until locking clip is released, 8'
reinforced PVC hose with 300 PSI maximum working pressure, deck flange for
countertop mounting, flange has handle locator guide to position spray heads and
handle facing forward at all times, 3/8" NPT male swivel-type inlet, ANSI-compliant
identification sign
Additional Options:
HG Under counter hose guide bracket to prevent hose from tangling or binding
ES643 Emergency Shower, Horizontally Mounted, Plastic
Shower Head
Shower head: 10" diameter. Shower head is orange ABS plastic (ES643) or stainless steel
(ES643SSH), 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with
chrome plated brass ball and Teflon® seals. Furnished with stainless actuating arm and
29" stainless steel pull rod, 1" IPS galvanized steel nipple with orange ABS plastic elbow,
(ES643) or galvanized street elbow (ES643SSH), 1" NPT female inlet, ANSI-compliant
identification sign
Additional Options:
FC20 Regulates shower flow rate to 20 GPM
SSH Stainless steel shower head
SC Self-closing ball valve. Note: Emergency showers with self-closing valves do not
LABORATORY SAFETY EQUIPMENT
EW806 Eyewash, Deck Mounted, 90º Swivel, Right Hand Mounting
Note: Check with code authority for compliance with local plumbing code.
Provincial Lab Systems Limited
34
Standard Finishes for pedestal boxes are as follows:
 Wrinkle black epoxy powder-coated finish (standard).
 Satin (brushed) aluminum finish (suffix “SA”).
 Polished (bright) aluminum finish (suffix “PB”).
Electrical boxes are UL-listed under standard UL514A, CSA approved, machined for both standard and
ground fault receptacles, and are furnished complete with grounding screws, 3/4” IPS mounting shank
and locknut, and stainless steel cover plates when receptacles are ordered with boxes.
E100
Single Gang Flush
E200
Double Gang Flush
E100 includes 125V 20A brown receptacle & outlet box
E103GF includes 125V 20A ground fault brown receptacle & outlet box
E107 includes 250V 20A brown receptacle & outlet box
E200 includes 125V 20A brown receptacles & outlet box
E203GF includes 125V 20A ground fault brown receptacles & outlet box
E207 includes 250V 20A brown receptacles & outlet box
E300WS
Single Gang,
Single Face
E333WS includes 125V 20A brown receptacle
E333GF-WS includes 125V 20A ground fault brown receptacle
E337WS includes 250V 20A brown receptacle
E400WS
Single Gang,
Double Face
E433WS includes 125V 20A brown receptacles
E433GF-WS includes 125V 20A ground fault brown receptacles
E437WS includes 250V 20A brown receptacles
E500WS
Double Gang,
Single Face
E533WS includes 125V 20A brown receptacles
E533GF-WS includes 125V 20A ground fault brown receptacles
E537WS includes 250V 20A brown receptacles
E600WS
Double Gang,
Double Face
E633WS includes 125V 20A brown receptacles
E633GF-WS includes 125V 20A ground fault brown receptacles
E637WS includes 250V 20A brown receptacles
Provincial Lab Systems offers a variety of single and dual
channel electrical raceways and accessories
LABORATORY ELECTRICAL FIXTURES
Electrical Fixtures & Raceways
Contact for more information
Provincial Lab Systems Limited
35
Fume Hoods
Fume Hood Applications
Laboratory professionals and students across the country, and all over the world, depend on the safety of
our hoods. Your protection is our first concern and the fume hood must be designed to be compatible with
the type of work that will be performed.
Never use a fume hood that has not been designed for the type of procedure being performed!
Common Fume Hood Types
Bench Fume Hoods:
Most common hood type used for general chemistry
procedures. Specialized versions include ADA Bench
Hoods for access by handicapped personnel,
Radioisotope, and Perchloric hoods.
Walk-In Hoods:
A floor-to-ceiling fume hood for chromatography,
distillation, pilot plant mock-ups, vat drug preparations
and other procedures requiring large equipment inside
the containment chamber.
At Provincial Lab Systems Systems, our top priority is your safety.
Your new Fume Hood as manufactured, is one of the safest in the industry, and is the result of extensive
research and development to ensure the fume hoods are economical and efficient. All hoods have been
designed, manufactured, and certified to SEFA 1 standards and independently tested to the
ASHRAE 110-1995 methods of testing.
However, the fume hood operator is the single most important safety feature in the laboratory and no
matter how safe the fume hood system is designed to be, the operator must follow certain procedures for
it to work safely and efficiently.
Product Warranty
Provincial Lab Systems guarantees their fume hood
products with a standard 5 year warranty !
LABORATORY FUME HOODS
Only specially designed fume hoods should be used for perchloric acid procedures. Other specialized
applications may require explosion proof fixtures, special liner materials or fire extinguisher systems.
Protecting the environment is high on our list of
priorities. We are constantly seeking new ways to use less
energy, use recycled materials, and to use environmentally
sound processes and practices.
Recently, we’ve introduced LED lighting, Greenstone Epoxy Resin
work surfaces utilizing post consumer recycled content, high
performance hoods that operate at greater efficiencies, and now
the Green Solution Hood.
Provincial Lab Systems Limited
36
Green Energy Fume hood
The Green Solution Hood
Unprecedented safety in a hood that uses 96% less energy than
standard hoods and has an operating cost 70% lower.
Safety
The Neutrodine® filtration technology has passed the most
comprehensive industry tests, performed by Intertek, a leader in
product quality certification.
Filtration test—NFX 15-211 & Standard Containment test
ASHRAE 110-1995 and EN 14175.
Safety features include stacked double filters, several sensors, alarm
and notification system and online remote monitoring software.
Environmental Impact
The Green Solution Hood is a ductless fume hood that is ecologically responsible in several ways.
It uses 96% LESS energy than standard fume hoods. Saving energy saves CO2 emissions.
Uses absorption. The harmful fumes are adsorbed by the Neutrodine® filtration system, unlike
traditional hoods that are vented to disperse the harmful fumes into the atmosphere.
Saturated filters are incinerated in a zero impact CO2 cycle.
The Green Solution Hood does not require the additional ductwork of a traditional hood, resulting in
smaller building designs, lower building material costs, and lower heating and air conditioning costs.
Ductless means flexibility. The Green Solution Hood can be moved and re-installed to accommodate
updates and changes in the laboratory design.
Cost
The retention capacity of the Neutrodine® filtration system is 50% greater than that of traditional
carbon based filters. This doubles the life of the filters in the Green Solution Hood making it extremely
economical in operation costs.
The Green Solution Hood will cut your laboratory fume hood operating costs by 70%. Most of our
customers experience ROI within 2 years. Contact us for a cost of operation analysis and ROI calculation.
Provincial Lab Systems Limited
LABORATORY FUME HOODS
The Green Solution Hood and its patented Neutrodine® filtration
system by Erlab® use molecular adsorption to handle fumes from
acids, solvents, liquids, and even powders with the use of a HEPA
filter accessory, together or individually all under the same hood.
37
Green Energy Fume hood (cont’d)
Filter Saturation Detection: A dual sensor system, this exclusive and innovative detection includes a sensor
for the filtration system and the ambient air quality.
Temperature Sensor: Sensitive to unusual temperature fluctuation, this sensor sets off audible and visible
alarms. This sensor is also synchronized with gGuard monitoring software to send a remote alert via
network. Temperature sensors are also a dual sensor system.
Sash Position and Airflow Detection: This system of sensors works to automatically adjust the blower speed
to ensure a face velocity of 100 fpm based on the height of the sash opening. This system can be
monitored and managed by gGuard online software.
User Identification System: An optional personalized RFID card may be used to operate the hood. The
Radio Frequency Identification card is programmed with personal information and allows a specified level
of access. The three levels of access include: User- full operation of the hood; Administrator- access to
recorded data on the hood such as usage and alarm history; and Maintenance- total access level allowing
calibration functions and access to other features for service and repairs.
Neutrodine® Filtration Technology by Erlab®
The Green Solution Hood is capable of filtering 98% or more of the chemicals commonly used in 99.9% of
laboratories. Most of the remaining 2% of chemicals are either non-toxic or they are chemicals used in less
than 0.1% of laboratories.
The Green Solution Hood, a ductless fume hood, is significantly more effective than traditional ductless
hoods because of the Neutrodine® filtration system by Erlab®. The Neutrodine® Filtration system is superior
in capability and safety to all other ductless fume hoods on the market today.
The Neutrodine® Filtration System is capable of a much broader spectrum of protection than traditional
ductless fume hoods containing carbon based filters. The Green Solution Hood handles liquids, solids,
acids, bases and solvents individually or together under the same hood.
Dual “Revolving Filter” System
The Green Solution Hood filter system includes two identical
filters, stacked with an open space between them that
contains a molecular detection sensor. When the main filter
reaches saturation, any escaping molecules are detected by the
sensor and adsorbed by the second identical filter.
When the main filter is saturated, the back up filter is moved to
take its place. The main filter is collected and incinerated, and a
brand new filter is installed above it as the new backup filter.
Unprecedented safety in a hood that uses 96%
less energy than standard hoods and has an operating cost 70% lower.
LABORATORY FUME HOODS
Sensors
gGuard Communication System
Finally, managers and safety officers can get real-time status
information, complete control and permanent, consistent
monitoring. Every Green Solution Hood comes with a gGuard
onboard computer that monitors and controls several aspects
of the hood’s operation.
Provincial Lab Systems Limited
38
High Efficiency Fume hood
The Eliminator 100 HP Series:
High Performance Low Velocity Fume Hood
A Green Alternative
Features of the HP Series include:
40-60% energy savings, accomplished without
compromising performance or safety, and highefficiency L.E.D. lighting with low maintenance costs.
The HP model is designed to operate economically while
creating a safe work environment without compromising
containment. By operating at 60 FPM, air flow across the
sash opening results in a 40% savings in fume hood
operation costs.
The HP hood was designed to do all this and still fit on a
standard-depth countertop and cabinet. This means no
disassembly and reassembly during the installation
process. The HP hood fits through a standard door
opening, making this hood the choice for that retrofit
job.
LED LIGHT
EH-HP STANDARD FEATURES
• Powder Coat Finish
• Full Frame Construction
• Shaft Drive Sash
• U.L. Listed Poly Resin Liner
• LED Lights
• Flush-Mount Airfoil
• Knock Down Capability
• Interior Access to Light
• Full-Length Finger Lift
• Sash Sweep
Part Number
Superstructure
W
H
D
EH-HP-48
48”
56”
33-1/4”
W
Worktop
H
D
48”
1-1/4”
30”
Hood Opening CFM @ CFM @
28”*
18”*
W
H
38”
28”
469
313
SP
Shipping
Weight
.25
200
EH-HP-60
60”
56”
33-1/4”
60”
1-1/4”
30”
50”
28”
619
413
.34
225
EH-HP-72
72”
56”
33-1/4”
72”
1-1/4”
30”
62”
28”
769
513
.34
270
EH-HP-96
96”
56”
33-1/4”
96”
1-1/4”
30”
86”
28”
1069
713
.34
300
Provincial Lab Systems Limited
LABORATORY FUME HOODS
The Eliminator HP hood comes standard with all the
same features as other Eliminator models, along with
some additional innovations to set this hood apart from
its competitors.
39
Student Workstation Fume hood
The Eliminator SWS Series:
Solution Work Station
The Solution Work Station was designed to allow 360 degree
viewing for undergraduate teaching labs. With the absence
of counterweights and baffles, the SWS maximizes ambient
light throughout the hood. In addition, this hood has the
flexibility necessary to allow back-to-back or side-by-side
configurations.
EH-SWS STANDARD FEATURES
 Powder Coat Finish
 Full Frame Construction
 Constant Force Sash
Counterbalance
 U.L. Listed Poly Resin Liner
 T-8 Fluorescent Light with
bulbs
 Flush-Mount Airfoil
 Interior Access to Light
 Full-Length Finger Lift
 Louvered Front for By-Pass
 10” Round S/S Duct Collar
Superstructure
Worktop
Hood Opening
CFM
SP at 10" Duct
@
Hood**
Size
100LFM
770
.25”
10"
Part
Number
W
H
D
W
H
D
W
H
EH-SWS-48
48"
60"
32-3/8"
48"
1-1/4"
29"
45-3/8"
29"
EH-DWS-48
48"
60"
64-3/4"
48"
1-1/4"
58"
45-3/8"
29"
770
.25”
2 – 10"
EH-SWS-60
60"
60"
32-3/8"
60"
1-1/4"
29"
57-3/8"
29"
1000
.33”
10"
EH-DWS-60
60"
60"
64-3/4"
60"
1-1/4"
58"
57-3/8"
29"
1000
.33”
2 – 10"
EH-SWS-72
72"
60"
32-3/8"
72"
1-1/4"
29"
69-3/8"
29"
1250
.5”
10"
EH-DWS-72
72"
60"
64-3/4"
72"
1-1/4"
58"
69-3/8"
29"
1250
.5”
2 – 10"
LABORATORY FUME HOODS
Viewing Everything, U.L. 1805 Classified
SWS = Single Sided Work Station
DWS = Double SIded Work Station (order two single sided hoods and face them back-to-back)
*HVAC will have to “wye” double sided hood duct.
Provincial Lab Systems Limited
40
Standard Airfoil Fume hood
The Eliminator 100 Series:
Airfoil Fume Hood
The EH-100 series airfoil-type fume hood features a 45degree angle around the fascia and a flush-mount
radiused airfoil across the bottom, which results in
minimized turbulence and increased performance.
Like the exterior of the hood, the airfoil is made from
chemical-resistant, powder-coated, 16-gauge cold rolled
steel. A stainless steel airfoil is available as an option.
Posts are 5” (127 mm) wide.
Five standard sizes offer design flexibility, or we’ll
customize to your specific needs.
EH-100 STANDARD FEATURES
 Powder Coat Finish
 Full Frame Construction
 Shaft Drive Sash
 U.L. Listed Poly Resin Liner
 T-8 Fluorescent Light with bulbs
 Flush-Mount Airfoil



Superstructure
Knock Down Capability
Interior Access to Light
Full-Length Finger Lift
Worktop
Hood Opening
CFM
CFM
@ 29”* @ 18”*
SP
Shipping
Weight
354
.25
190
833
521
.25
200
29”
1100
688
.34
225
29”
29”
1367
1900
854
1188
.34
.40
270
300
Part
Number
W
H
D
W
H
D
W
H
EH-111-36
36”
56”
33-1/4”
36”
1-1/4”
30”
26”
29”
567
EH-111-48
48”
56”
33-1/4”
48”
1-1/4”
30”
38”
29”
EH-111-60
60”
56”
33-1/4”
60”
1-1/4”
30”
50”
EH-111-72
EH-111-96
72”
96”
56”
56”
33-1/4”
33-1/4”
72”
96”
1-1/4”
1-1/4”
30”
30”
62”
86”
LABORATORY FUME HOODS
Minimized Turbulence, Increased Performance
U.L. 1805 Classified
* Height of open sash; CFM calculated at 100 FPM
Provincial Lab Systems Limited
41
Double-Faced Airfoil Fume hood
The Eliminator 200 Series:
Double-Faced Fume Hood
The Eliminator 200 series provides the same
aerodynamic design features as the EH-100 airfoil hood
series, with entrance from two sides. This makes it ideal
for use in classroom or prep room settings or whenever
demonstration of experiments is desired.
A 45-degree angle around the fascia and a flush-mount
radiused airfoil across the bottom provide minimized
turbulence and increased performance.
The EH-200 features standard 5” (127 mm) posts to
allow for electrical and remote control plumbing services
on both sides, and these can be configured to your exact
specifications.
Five standard sizes and an array of options make this
one of the most flexible fume hoods available anywhere.
EH-200 STANDARD FEATURES
 Powder Coat Finish
 Full Frame Construction
 U.L. Listed Poly Resin Liner
 LED Lights
 Flush-Mount Airfoil
 Knock Down Capability
 Interior Access to Light
 Full-Length Finger Lift
 Louvered Front for By-Pass
 Sash Interlock
Part
Number
EH-211-36
Superstructure
W
H
D
36”
56” 35-1/2”
W
36”
Worktop
H
D
1-1/4” 29”
Hood Opening CFM
CFM
@ 29”* @ 18”*
W
H
26”
29”
567
354
.25
Shipping
Weight
190
EH-211-48
48”
56”
35-1/2”
48”
1-1/4”
29”
38”
29”
833
521
.33
200
EH-211-60
60”
56”
35-1/2”
60”
1-1/4”
29”
50”
29”
1100
688
.34
225
EH-211-72
72”
56”
35-1/2”
72”
1-1/4”
29”
62”
29”
1367
854
.34
270
EH-211-96
96”
56”
35-1/2”
96”
1-1/4”
29”
86”
29”
1900
1188
.40
300
SP
LABORATORY FUME HOODS
Dual Access, U.L. 1805 Classified
* Height of open sash; CFM calculated at 100 FPM with one sash open
Provincial Lab Systems Limited
42
Polypropylene Fume hood and Portable Hoods
A polypropylene fume hood is an excellent choice in a by-pass fume
hood for the reasons there is no exposed metal to rust, their
ergonomic design, 100% polypropylene with seam welded metal free
construction lasting longer. Air by-pass feature promotes better
uniform face velocity during window operations. Other features
include:
 sealed interior fluorescent electronic lighting
 counterbalanced sliding lexan view screen with an 18" (457mm)
maximum opening to fully closing
 flush Mounted exterior/interior plumbing chase access panels
 polypropylene service valves except natural gas
 removable rear baffle for maintenance
 reinforced 1/2-inch thick polypropylene work surface
 lower work access opening airfoil
 PVC Electrical Junction Box
PH4830
PH6030
PH7230
PH9630
48” x 30”
60” x 30”
72” x 30”
96” x 30”
460CFM @ 0.3”w.g.
620CFM @ 0.4”w.g.
775CFM @ 0.5”w.g.
1075CFM @ 0.8”w.g.
Contact Provincial Lab Systems for your specific requirements and
available accessories.
Ventilation Stations
Ventilation stations may be used as light duty fume hoods in
science classroom work stations, solvent cleaning work bays,
weighing stations or for pathology and cytology. With glass tops and
sides and low profiles, they are well suited for educational settings.
Ventilation Stations may be ducted to the outside or connected to a
portable exhauster (sold separately) for HEPA and/or Carbon Filtered
exhaust back into the laboratory.
Features include air foil with openings to enhance airflow and zonedperforated rear baffle that creates horizontal laminar airflow to
maximize containment. Other features include side-entry air foils,
built-in top-mounted airflow monitor; low profile design; dry powder,
sturdy epoxy-coated aluminum frame and steel rear panel and baffle;
3/16" thick, non-static producing tempered safety glass sides and top
for excellent visibility, ambient light and protection; 8" high sash
opening; ergonomic 1/4" thick tempered safety glass angled sash that
is hinged to pivot up and lock for loading; and two utility ports.
VS3629
VS4829
PE1423
36” x 29” x 32”h 60 fpm exhausts 140 CFM at .06" sp
48” x 29” x 32”h 60 fpm exhausts 185 CFM at .09" sp
14” x 23” x 22.65” Portable Exhauster
POLYPROPYLENE & PORTABLE HOODS
Polypropylene Fume Hood
Contact Provincial Lab Systems for your specific requirements and
available accessories.
Provincial Lab Systems Limited
43
Extractor Arms
Extractor arms provide a flexible fume removal system and come with
either a 75mm (3") or 100mm (4”) tube diameter. Use the 3” wherever air
volumes of up to 100 cfm are required for exhausting fumes.
One-handed adjustments make operation easy. Systems are available with
white or red polypropylene joints and aluminum or polypropylene arms.
Choose from wall or ceiling mounted models. Customize your system with
hoods, ceiling columns or wall brackets.
Canopy Hood
Canopy hoods are designed to collect heat, steam, and various fumes over
the work surface. The hood is typically mounted over the work surface
area and attached to the wall. This model also has two suspended rod
brackets welded to the front for support. Canopy hoods are constructed
from: T304 stainless steel (SS), or steel with a powder coated corrosive
resistant paint (PC).
CH3630
CH4830
CH6030
36” x 30”
48” x 30”
60” x 30”
Contact Provincial Lab Systems for other sizes.
Autopsy Tables
Autopsy Tables are T304 #4 stainless steel, fully welded and polished
construction ensuring a high quality finish. Tables come complete
with sink, wash down spray, lab faucets, removable perforated trays,
adjustable air flow, nylon levelling feet and drop in sink.
Options include: T316 stainless steel, power lift, locking swivel casters, and
insinkerator.
AT6032
60” x 32” x 66”
Contact Provincial Lab Systems for other pathology equipment and
models.
Stainless Steel Pass Thru
All type T304 #4 stainless steel construction with solid or glass doors.
Doors have lift off hinges and mechanical door interlock. Comes
complete with wall mounting hardware and trim kit. Options include:
T316 Stainless Steel # 4 finish, electro mechanical interlock, H.E.P.A filter
system, nitrogen purged, and custom sizes available.
PT2424
EXTRACTOR ARMS, CANOPIES & AUTOPSY
Extractor Arms, Canopies, Autopsy Tables, and Pass Thru
24” x 24” x 16”
Contact Provincial Lab Systems for other models and configurations
Provincial Lab Systems Limited
44
Laboratory Accessories
Pegboards
PB1830
PB2430
PB3030
PB4830
18” x 30”
24” x 30”
30” x 30”
48” x 30”
ProLab Frosted Series Markerboards
These markerboards feature a unique, specially-coated 1/2" thick high
grade acrylic and 1/4” translucent rear panel. Surface is “glass-clear”
while the frost panel is added behind to provide light writing surface.
Each board is radius and drilled for stainless steel stand-out attachments
included with each board.
Contact Provincial Lab Systems for custom sizes.
PM3636
PM4836
PM7236
36” x 36"
48” x 36"
72” x 36"
Balance Tables
Balance tables provide superior stability for highly calibrated equipment.
The top and legs are solid 2-1/2" [64mm] thick molded epoxy resin. A
galvanized steel lateral support beam adds strength and rigidity.
Rubberized vibration reduction pads are included to suppress floor
vibrations and increase instrument accuracy and consistency.
BT3524
35" x 24" x 31”h
Hand Crank and Motorized Adjustable Height Tables
LABORATORY ACCESSORIES
Available in a variety of materials: Plastic Laminate (PL), Phenolic Resin
(PR), Stainless Steel (SS), Epoxy Resin (ER)
Optional accessories: drip trough (DT)
Contact Provincial Lab Systems for other accessories and sizes
These ergonomic metal tables provide a healthy, safe and productive
work environment. These work stations are offered in either a manual
crank adjustable height table, or the convenient motorized version.
Comes with your choice of work surfaces and options for shelving above.
HC4830
HC6030
MC4830
MC6030
48" x 30" (hand crank)
60" x 30" (hand crank)
48" x 30" (Motorized)
60" x 30" (Motorized)
Contact Provincial Lab Systems for other sizes and available accessories
Provincial Lab Systems Limited
45
Laboratory Accessories
Lab Carts
LC3018
30” x 18” x 36”h
Contact Provincial Lab Systems for other models and sizes.
Adjustable Lab Stool with Foot Ring






Posture correct wide back lab stool with adjustable foot ring
Powder coated pneumatic lift
Injection molded black polypropylene plastic seat
Seat has anti-stat additive and non-slip surface
Open back provides ventilation and strength
Fiberglass reinforced cast nylon casters
LS2195
Contact Provincial Lab Systems for other models.
Bench Supports
Bench supports are used to support plumbing and electrical lines along with
the laboratory work surface above. Supports consist of a galvanized vertical
channel strut and “U” brackets at wall conditions, and two vertical channel
struts at islands as shown in diagram left. Pipe and electrical conduit
clamps are not included.
BS0736
BS1436
Wall Conditions
Island Conditions
Contact Provincial Lab Systems for other models and configurations.
Gas Cylinder Supports
Cylinder holders secure cylinders to a wall or to the
Side of a work bench. Edges are protected with steel
reinforced vinyl to help maintain your cylinders and
provide extra grip.
LABORATORY ACCESSORIES
Utility carts are designed and built to ensure durability. The carts are made
from T304 #4 stainless steel and are fully welded and polished construction.
Comes complete with non-marking casters and wheels, with options for
T316 stainless steel, locking/swivel casters, and perforated adjustable
shelves.
Storage racks secure from 2 to 6 full size cylinders (up to 10” dia) per rack.
These racks are constructed of welded steel and are finished in a baked
polyurethane finish, and come with double restraints.
GS0001
SG0006
Single Wall Cylinder Holder
6 Cylinder Storage Racks
Contact Provincial Lab Systems for other models and configurations.
Provincial Lab Systems Limited
46
Provincial Lab Systems Limited
Provincial Lab Systems Limited
Provincial Lab Systems Limited
23 Gloster Court
Burnside Industrial Park
Dartmouth, NS B3B 1X9
Tel: 902 468-3034
Toll Free: 1 866 241-5877
Fax: 902 468-3263
www.provinciallabsystems.com
* All products are available as FSC® certified
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement