Radio Shack | 40-4092 | User's Manual | Radio Shack 40-4092 User's Manual

8 314/+PEJ"5VGTGQ"%GKNKPI"5RGCMGT
40-4092
OWNER’S MANUAL — Please read before using this equipment.
#"+/2146#06"#
If an icon appears at the end of a paragraph, go
to the box on that page with the corresponding
icon for pertinent information.
Rý— Warning
. — Caution
± — Note
# — Important
° — Hint
Your RadioShack 6 1/2-Inch Stereo Ceiling
Speaker features two cross-overs, a 6 1/2inch dual voice coil woofer for rich lows, and
two 1/2-inch tweeters for crisp highs. The
speaker can be connected to work in either
mono or stereo configurations. The angled
tweeter array provides optimum stereo
separation and gives you stereo sound from
just one speaker. Your speaker can handle
up to 80 watts of music power. The wing-type
mounting system makes it easy to mount
your speaker flush with a ceiling or wall,
making it ideal for unobtrusive use in a
surround-sound system. The frame and grille
can also be painted to match the room’s
decor.
+056#..#6+10
24'2#4+0)"6*'".1%#6+10
24'2#4+0)"6*'"52'#-'4
To mount your speaker, you need the
following items (not supplied, available at
your local RadioShack or online at
RadioShack.com).
If you choose to paint the frame and grille,
paint them and let them dry before you
connect the speaker wire or mount the
speaker.
• drywall or keyhole saw
• wire stripper
• Phillips screwdriver
• pencil or marker
• 18–20 gauge speaker wire
To remove the grille for painting, insert a
paper clip into one of the grille openings, then
pull up. Or, you can carefully twist the plastic
frame back and forth until the grille edge
becomes exposed, then lift the grille to
remove it.
1. Be sure the mounting surface is between
3/8 inch and 1 1/4 inch thick, with at least a
2 3/4-inch clearance behind the mounting
surface and no wall studs or other
objects to block the back of the speaker.
±"016'"±"
Do not paint the speaker element. We
recommend you spray-paint the grille so paint
does not block the holes.
2. Remove the inner cardboard disc from
the supplied template/paint mask and
keep it for later. Use the outer portion as
a template to mark the cutout hole size
and location for mounting the speaker.
Carefully remove the dust cloth from behind
the grill and replace it after you are finished
painting.±
You can also paint the frame to match your
wall or ceiling. To prevent paint from entering
the speaker, remove the grille and insert the
supplied cardboard paint mask. After the
paint is dry, remove the paint mask and
replace the grille.
Paint Mask
."%#76+10".
3. Use a drywall or keyhole saw to cut the
hole..
Be sure not to cut into any existing wiring or
plumbing hidden behind the wall.
%100'%6+0)"6*'"52'#-'4"9+4'5
±"016'5"±"
•
Avoid routing the speaker wire near electrical
wires.
•
Do not nail or staple the speaker wire.
Your local RadioShack store sells a wide
selection of speaker wire. We recommend
you use wire that is color-coded or marked on
one side to help you connect the wire
correctly.
For a stereo configuration, route two sets of
wires to the speaker from the receiver.±
For a mono configuration, route one set of
wires.
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
1. Separate about 4 inches of speaker wire
at each end.
Limited Two-Year Warranty
This product is warranted by RadioShack against
manufacturing defects in material and workmanship
under normal use for two (2) years from the date of
purchase from RadioShack company- owned stores
and authorized RadioShack franchisees and dealers.
EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO CUSTOMER
OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT
OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack
HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
In the event of a product defect during the warranty
period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack
store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the
product with one of the same or similar design; or (c)
refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be
charged for repair or replacement of the product made
after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure
caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to
follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than
those provided by a RadioShack Authorized Service
Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or
insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
RadioShack Customer Relations, 200 Taylor Street,
6th Floor, Fort Worth, TX 76102
12/99
1/4
inch
4 inches
2. Using a wire stripper, remove about 1/4
inch of insulation from each wire. Then
twist the ends of each wire.
56'4'1"%10(+)74#6+10
1. Connect the marked wire to a red
speaker terminal by pressing the release
tab, inserting the wire into the hole, and
then releasing the tab. Repeat this
procedure to connect the unmarked wire
to the black terminal on the same
terminal block.
2. Repeat Step 1 to connect the second set
of wires to the other terminal block.
3. For the first set of wires, connect the
marked wire coming from the speaker to
the left channel of the receiver's positive
(+) terminal. Then connect the unmarked
wire to the left channel of the amplifier's
negative (–) terminal.
4. Repeat Step 3 to connect the remaining
set of wires to the receiver’s right
channel terminals.
/101"%10(+)74#6+10
Wire the two sets of terminals located on the
back of the speaker in parallel or series.
To connect in parallel:
1. Using two pieces of wire, connect both
sets of red terminals together and both
sets of black terminals together.
2. Connect the wires from the receiver to
one set of terminals as described in
“Stereo Configuration” Step 1.
To connect in series:
1. Using one piece of wire, connect the red
terminal of one set of terminals to the
black terminal of the other set.
2. Connect the wires from the receiver to
the remaining black and red terminals.
/1706+0)"6*'"52'#-'4
1. Remove the grille to expose the
mounting screws.
2. Be sure the mounting tabs are turned in,
allowing the speaker to fit into the hole.
Then insert the speaker into the
mounting hole.
3. Use the four screws to tighten the
mounting tabs to the wall or ceiling. Be
careful not to overtighten the screws.
4. Replace the grille.
Mounting Tabs
To remove the speaker from the wall or
ceiling, loosen the screws only far enough to
remove the speaker. This will prevent loss of
the mounting tabs.
52'%+(+%#6+105
Resonance Frequency ................................................................................................................ 55 Hz ±20%
Frequency Response ................................................................................................... 30 Hz through 20 kHz
Power Rating ................................................................................................... 40 Watts RMS, 80 Watts Max.
Impedance (nominal)...........................................................................................................................8 Ohms
Sensitivity...Mono (Series/Parallel), Stereo ..................................................................................83 dB ±3 dB
Voice Coil (Woofer 4 layer) ......................................................................................................... 1 in. (25 mm)
Voice Coil (Tweeter ea.) .......................................................................................................... .55 in. (14 mm)
Magnet Size (Woofer).............................................................................................................................. 11 oz
The plastic enclosure for this speaker meets UL 94 requirements for flammability.
Specifications are typical; individual units may vary. Specifications are subject to change or improvement
without notice.
RadioShack Corporation
Fort Worth, Texas 76102
40-4092
03A02
Printed in China
Download PDF