Radio Shack 43-3206 User's Manual

Radio Shack 43-3206 User's Manual
READ THIS FIRST
We have designed your telephone to conform to federal
regulations and you can connect it to most telephone
lines. However, each device you connect to the phone
line draws power from it. This power draw is the device’s
Ringer Equivalence Number, or REN. The REN is on the
bottom of your phone.
If you are using more than one phone or other device on
the line, add up all the RENs. If the total is more than five
(or three in rural areas) your phones might not ring. If
ringer operation is impaired, remove one of the devices
from the line.
If your phone causes problems on the phone line, the
telephone company can disconnect your service. The
phone company tries to notify you in advance. If advance
notice is not practical, the telephone company notifies
you as soon as possible and advises you of your right to
file a complaint with the FCC.
The phone company can also make changes to its lines,
equipment, operations, or procedures that could affect
the phone’s operation. The phone company notifies you
in advance, so you can take the necessary steps to prevent interruption of your phone service.
FCC STATEMENT
Your telephone complies with Part 68 of FCC Rules. You
must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are on the bottom of your phone.
Note: You must not connect your telephone to:
• coin-operated systems
• party-line systems
• most electronic key phone systems
CARE
• Keep the phone dry.
• Handle the phone carefully. Do not drop it.
• Do not use or store the phone in temperature
extremes.
• Keep the phone away from dust and dirt.
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year
from the date of purchase from RadioShack company-owned stores
and authorized RadioShack franchisees and dealers. EXCEPT AS
PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN
LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR
ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the
product and the RadioShack sales receipt as proof of purchase date to
any RadioShack store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product repair without charge
for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be
used in the performance of warranty service. Repaired or replaced
parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal
usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack
Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or
(f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort
Worth, TX 76102
We Service What We Sell
• Do not modify or tamper with the phone’s internal components. Doing so might invalidate the phone’s warranty and void your FCC authorization to operate it. If
the phone is not operating as it should, take it to your
local RadioShack store for assistance. If the trouble is
harming the phone lines, the phone company might
ask you to disconnect the telephone until you fix the
problem.
■ Handset Volume Control
■ Flash
■ Redial
■ Mute
■ Pause
■ Adjustable Ringer
■ Hearing Aid Compatible
12/99
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
01A00
ET-3206
Desktop Fashion
Phone
Printed in China
Owner’s Manual
Cat. No. 43-3206
MOUNTING THE PHONE
Direct Wall Mounting
USING THE PHONE
PlugPlug
the handset
cord into
theinto
jacks
the handset
cord
the
on the
base
and
handset.
jacks on the base and handset.
Convienent keyhole slots are located on the
base of the phone to provide easy wall
mounting. Adjust the handset holder by sliding the clip up. Then rotate it and slide it
back into the slot.
To mount the phone directly on the wall, connect the
supplied long cord to the phone’s line jack and route it
through the strain relief on the bottom of the base. Drill
two holes 31/4 inches (83 mm) apart. Then thread a
screw (not supplied) into each hole, letting the heads
extend 3/16 inch (5 mm) from the wall. Fit keyhole slots
over screws, slide the phone down to secure it into
place. Plug the cord into the wall jack.
Hold down MUTE to keep
the other party from hearing
you. To resume the conversation, release MUTE.
Press REDIAL to dial
the last number dialed
up to 31 tone and 32 pulse
numbers.
31/4
3/16
Mounting on a Wall
Press PAUSE to enter a
pause for systems that
require an access code
(9, for example) before
you can dial an outside
number.
Mounting on a Desk
Press FLASH in place of
the switchhook for special services such as Call
Waiting.
If you have pulse service,
press TONE to dial numbers
with tone signals. The phone
returns to pulse dialing when
you hang up.
Note: If you do not subscribe to any special services, pressing FLASH
might disconnect the call.
Desk Mounting
Plug long cord into the phone’s jack on the back of the
phone then plug the other end into a phone line jack.
Set VOLUME HI/MED/LO to adjust the
volume you hear through the handset.
Note: The USOC number of the jack to be installed is
RJ11C.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important operating and servicing
instructions included in the papers with
the telephone.
Set to TONE or PULSE to match the type
of service you have. If you have pulse
(rotary) service, you can switch to TONE
during a call to use tone services.
Set the ringer Hi-Low switch to the left for a high ringer volume. Set the
switch to the right for a low ringer volume.
ÐÐ
 2000 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement