Radio Shack ARH7078-A Owner's Manual

Add to my manuals
1 Pages

advertisement

Radio Shack ARH7078-A Owner's Manual | Manualzz

31-5029

Making Connections

BASIC

Connecting to Your TV Using an

RF Modulator (not supplied)

5 DVD Home Theater in a Box with Wireless Rear Speakers

Refer to your Owner’s Manual for complete instructions.

GOOD

Connecting the Video

Output to Your TV

BETTER

Connecting the

S-video Output to Your TV

BEST

Connecting the

Component Video

Output to Your TV

OR OR OR

Placing the Speakers

• Place the center speaker directly above or below the TV so that the sound of the center channel is localized at the TV.

• Try to place all the speakers at an equal distance from the listening position.

Listening to TV Audio

Through the System

R

EMOTE

C

ONTROL

Installing

Batteries

Use the supplied video cable to connect the

VIDEO OUT jack to a video input on your TV.

Use an S-video cable (not supplied) to connect the

S-VIDEO OUT to an Svideo input on your TV.

Connecting the Speakers

Use a component video cable

(not supplied) to connect the

COMPONENT VIDEO OUT to a set of component inputs on your TV.

1. Connect the WIRELESS ( IN ) jack on the transmitter to the

WIRELESS ( OUT ) jack on the rear panel of the receiver, using the supplied RCA stereo cord.

2. Connect the supplied AC adapter to the DC IN inlet on the rear panel of the unit.

Then plug the other end into an AC power outlet.

The remote requires two

AA batteries (not supplied).

Connect a stereo audio cable (not supplied) from the audio outputs of your

TV to the TV IN jacks on this system.

• Make sure you disconnect power from all components.

• The wireless mode is the default setting.

• Connect each speaker using the color-coded speaker cable. Match them to the colored labels above the speaker terminals.

• Do not connect any of the supplied speakers to any other amplifier. This may result in malfunction or fire.

© 2003 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

RadioShack Corporation

Fort Worth, Texas 76102

ARH7078-A

04A03

Printed in Malaysia

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

How do I connect the DVD player to my TV?
You can connect the DVD player to your TV using the supplied video cable, an S-video cable (not supplied), or a component video cable (not supplied).
How do I connect the wireless rear speakers to the receiver?
Connect the WIRELESS (IN) jack on the transmitter to the WIRELESS (OUT) jack on the rear panel of the receiver using the supplied RCA stereo cord.
How do I place the speakers for the best sound experience?
Place the center speaker directly above or below the TV and try to place all the speakers at an equal distance from the listening position.
How do I connect the DVD player to my TV using an RF modulator?
Connect the RF OUT jack on the DVD player to the RF IN jack on the RF modulator (not supplied). Then connect the RF modulator to your TV's antenna input.
How do I listen to TV audio through the system?
Connect a stereo audio cable (not supplied) from the audio outputs of your TV to the TV IN jacks on the DVD player.
What kind of batteries does the remote control require?
The remote control requires two AA batteries (not supplied).
How do I connect the speakers to the receiver?
Connect each speaker using the color-coded speaker cable. Match them to the colored labels above the speaker terminals.
What is the default setting for the speakers?
The wireless mode is the default setting for the speakers.
Can I connect the supplied speakers to another amplifier?
No, do not connect any of the supplied speakers to any other amplifier. This may result in malfunction or fire.
Download PDF

advertisement