CEM
CEM
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
10
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
Compact InfraRed Thermometers with Dual Laser targeting
www.ponpe.com 2007
11
contact:
[email protected]
DT-8861/8862/8863
CEM
Compact InfraRed Thermometers with Dual Laser targeting
8861/8862/8863 Series compact Infrared Thermometers provides
more faster and accurate readings for most surface temperature
www.cem-meter.com.cn
150ms faster sampling time
1% accuracy
measurements.
Two laser points converge to a single spot when the unit is at the
optimal distance from the object being measured.
Dual laser pointers
150ms faster sampling time
Built-in dual laser pointers focus target for high accuracy measurement
Wide temperature range from -50.0 to 1000°C(-58.0 to 1832ºF)
Adjustable emissivity from 0.10 to 1.0
Double molded housing design
Features
User selectable ºC or ºF
8861
8862
8863
*
*
*
Dual laser targeting
*
*
*
Automatic Data Hold
*
*
*
Auto Power Off
*
*
*
White Backlit LCD Display
*
*
*
Overrange indication
*
Trigger lock for continuous use
*
*
*
*
Max display
*
*
High and low alarm
*
*
*
*
Adjustable emissivity
High Temperature
600ºC/1112ºF
Optical Resolution (Distance to Spot size)
800ºC/1472ºF 1000ºC/1832ºF
8:1
8:1
20:1
Specifications
8861
IR Temp. Range
8862
8863
-50ºC to 600ºC/
-50ºC to 800ºC/
-50ºC to 1000ºC/
-58ºF to 1112ºF
-58ºF to 1472ºF
-58ºF to 1832ºF
0.1ºC/ºF
0.1ºC/ºF
0.1ºC/ºF
IR Temp. Resolution
Optical Resolution
Emissivity
8:1 Distance to Spot size
Fixed at 0.95
Basic Accuracy
±1.0% of reading
Response Time
Less than 150ms
Spectral response
8:1 Distance to Spot size 20:1 Distance to Spot size
Adjustable 0.10~1.0
Adjustable 0.10~1.0
8-14μm
Size(HxWxD): 146mm x 104mm x 43mm
Weight: 163g
Distance (D) to Spot size(S)
D:S=8:1 (8861,8862)
0.5 in spot @ 4 in
13mm spot @ 104mm
Accessories:
9V battery, Carrying case and Gift box.
www.ponpe.com
(Unit: mm)
12
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional High Temperature
Thermometer with Wireless USB
Interface(RF 433MHz)
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
Analog output 1.0mV/ºC or ºF
Wireless USB interface
disinterrupted power
Operation without handhold
High quality documention
www.ponpe.com 2007
13
contact:
[email protected]
DT-8855
CEM
High Temperature IR Thermometer with Wireless USB Interface
www.cem-meter.com.cn
8855 compact Infrared Thermometer provides fast, easy, and accurate readings for most surface temperature measurements with Wireless
USB Interface(RF 433MHz)
Wireless USB Interface(RF 433MHz)
High 30:1 distance to target ratio measures smaller surface areas at
greater distances
Widest temperature range from -50.0 to 1050°C(-58.0 to 1922ºF)
Unique flat surface, modern housing design
Built-in laser pointer
30 : 1 distance to spot size
Type K temperature measurements
Automatic capture emissivity for targeting
IR thermometer with type K temperature measurement
Automatic Data Hold
Max, Min DIF, AVG record
High and low alarm
Adjustable emissivity
Wireless USB Interface(RF 433MHz)
20 Point Memory
Features
8855
User selectable ºC or ºF
*
Laser targeting
*
Automatic Data Hold
*
Auto Power Off
*
White Backlit LCD Display
*
Overrange indication
*
Trigger lock
*
Max, Min, DIF, AVG record
*
High and low alarm
*
Adjustable emissivity
*
Type K temperature measurements
Large, easy-to-read LCD
display with backlit
*
High Temperature
1050ºC/1922ºF
Wireless USB Interface(RF 433MHz)
*
Optical Resolution (Distance to Spot size)
30:1
Specifications
Type K temperature
8855
IR Temp. Range
-50ºC to 1050ºC/
-58ºF to 1922ºF
IR Temp. Resolution
0.1º up to 2000º, 1º over 2000º
Optical Resolution
Type K Temp. Range
30:1 Distance to Spot size
-50ºC to 1370ºC/
-58ºF to 2498ºF
Type K Temp. Resolution 0.1º up to 2000º, 1º over 2000º
Response Time
Basic Accuracy
Emissivity
Less than 1 second
±1.5% of reading
Adjustable 0.10~1.0
Size(HxWxD):
180mm x 106mm x 48mm
Weight: 250g
Distance (D) to Spot size(S)
D:S=30:1
(Unit: mm)
Accessories:
9V battery, Carrying case and
Gift box, type K temperature
probe, RF transmitter,charger,
tripod, PC Interface.
www.ponpe.com
IR
Laser
14
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional High Temperature InfraRed Thermometer
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
15
contact:
[email protected]
DT-8833/8835
CEM
Professional High Temperature InfraRed Thermometers
www.cem-meter.com.cn
IR Thermometer with Type K Input and 20 Point Memory
Automatic capture emissivity for targeting
8833/8835 compact Infrared Thermometer provide fast, easy, and
accurate readings for most surface temperature measurements with Type
30 : 1 distance to spot size
13 : 1 distance to spot size
K Input and 20 Point Memory
IR Thermometer with Type K Input and 20 Point Memory
High 30:1 distance to target ratio measures smaller surface areas at greater
distances (8835)
Widest temperature range from -50.0 to 1050°C(-58.0 to 1922ºF)
Unique flat surface, modern housing design
Built-in laser pointer
Type K temperature measurements
Automatic capture emissivity for targeting
Automatic Data Hold
Max, Min DIF, AVG record
High and low alarm
Adjustable emissivity
Features
8833
8835
User selectable ºC or ºF
*
*
Laser targeting
*
*
Automatic Data Hold
*
*
Auto Power Off
*
*
White Backlit LCD Display
*
*
Overrange indication
*
*
Trigger lock
*
*
Max, Min, DIF, AVG record
*
*
High and low alarm
*
*
Adjustable emissivity
*
*
Type K temperature measurements
*
*
13:1
30:1
High Temperature (1050ºC/1922ºF)
*
Optical Resolution (Distance to Spot size)
Specifications
8833
IR Temp. Range
8835
-50ºC to 800ºC/
-50ºC to 1050ºC/
-58ºF to 1472ºF
-58ºF to 1922ºF
IR Temp. Resolution
0.1ºC/ºF
Type K Temp. Range
-50ºC to 1370ºC/
0.1ºC/ºF
Thermistor clamp
-50ºC to 1370ºC/
-58ºF to 2498ºF
-58ºF to 2498ºF
Type K Temp. Resolution 0.1º up to 2000º, 1º over 2000º
0.1º up to 2000º, 1º over 2000º
Response Time
Less than 1 second
Less than 1 second
Basic Accuracy
±1.5% of reading
±1.5% of reading
Adjustable 0.10~1.0
Adjustable 0.10~1.0
Emissivity
temperature probe
Distance (D) to Spot size(S)
D:S=30:1(8835)
(Unit: mm)
Size(HxWxD): 180mm x 106mm x 48mm
Weight: 250g
IR
Laser
Accessories:
9V battery, Carrying case and clamshell, type K temperature probe
www.ponpe.com
16
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional High Temperature
InfraRed Thermometers
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
17
contact:
[email protected]
DT-8868/8869
CEM
Professional High Temperature InfraRed Thermometers
www.cem-meter.com.cn
150ms faster sampling time
1% accuracy
8868/8869 Series provides more faster, easy and accurate readings
50 : 1 distance to spot size
Dual laser pointer
for most surface temperature measurements with Dual laser pointers.
Two laser points converge to a single spot when the unit is at the
optimal distance from the object being measured.
High 50 to 1 distance to target ratio measures smaller surface areas at
greater distances
Widest temperature range from -50.0 to 1200ºC (-58.0 to 2192ºF)
Unique flat surface, modern housing design
Built-in dual laser pointer
Automatic Data Hold
Max, Min, DIF, AVG, record
High and low alarm
Adjustable emissivity
Features
User selectable ºC or ºF
8868
8869
*
*
Laser targeting
*
*
Automatic Data Hold
*
*
Auto Power Off
*
*
White Backlit LCD Display
*
*
*
*
Overrange indication
High Temperature
1100ºC/2012ºF 1200ºC/2192ºF
Max, Min, DIF, AVG record
*
*
High and low alarm
*
*
Adjustable emissivity
*
*
Trigger lock
*
*
Specifications
Range
Response Time
Resolution
Basic Accuracy
Distance (D) to Spot size(S)
Optical Resolution
D:S=50:1(8869)
Emissivity
0.5 in spot @ 25 in
8869
-50ºC to 1200ºC/
-58ºF to 2012ºF
-58ºF to 2192ºF
Less than 150ms
Less than 150ms
0.1ºC/ºF
0.1ºC/ºF
±1.0% of reading
±1.0% of reading
30:1 Distance to Spot size
50:1 Distance to Spot size
Adjustable 0.10~1.0
Adjustable 0.10~1.0
Size(HxWxD): 220mm x 120mm x 56mm
Weight: 290g
13mm spot @ 650mm
Accessories:
9V battery, Carrying case and Gift box
(Unit: mm)
www.ponpe.com
8868
-50ºC to 1100ºC/
18
2007
contact:
[email protected]
DT-8858/8859
CEM
Professional High Temperature InfraRed Thermometers
www.cem-meter.com.cn
50 : 1 distance to spot size
High Temperature
8858/8859 Series provide fast, easy and accurate readings for most surface
temperature measurements.
1600ºC (2912ºF)
High 50 to 1 distance to target ratio measures smaller surface areas at
greater distances
Widest temperature range from -50.0 to 1600ºC (-58.0 to 2912ºF)
Unique flat surface, modern housing design
Built-in laser pointer
Automatic Data Hold
Max, Min, DIF, AVG, record
High and low alarm
Adjustable emissivity
Distance (D) to Spot size(S)
D:S=50:1
IR
Laser
(Unit: mm)
Features
8858
8859
User selectable ºC or ºF
*
*
Laser targeting
*
*
Automatic Data Hold
*
*
Auto Power Off
*
*
White Backlit LCD Display
*
*
Overrange indication
*
*
High Temperature
*
*
Max, Min, DIF, AVG record
*
*
High and low alarm
*
*
Adjustable emissivity
*
*
Trigger lock
*
*
Specifications
Range
8858
8859
-50ºC to 1300ºC/
-50ºC to 1600ºC/
-58ºF to 2372ºF
-58ºF to 2912ºF
Response Time
Less than 1 second
Resolution
0.1º up to 2000º, 1º over 2000º
Basic Accuracy
±1.5% of reading or ±2ºC/±4ºF
Optical Resolution
50:1 Distance to Spot size
Emissivity
Adjustable 0.10~1.0
Size(HxWxD): 220mm x 120mm x 56mm
Weight: 290g
Accessories:
9V battery, tripod, Carrying case and Gift box
www.ponpe.com 2007
19
contact:
[email protected]
DT-8838/8839
CEM
Professional High Temperature InfraRed Thermometers
www.cem-meter.com.cn
50 : 1 distance to spot size
8838/8839 Series provide fast, easy and accurate readings for most
surface temperature measurements.
High 30 to 1, 50 to 1 distance to target ratio measures smaller surface
areas at greater distances
Widest temperature range from -50.0 to 1000ºC (-58.0 to 1832ºF)
Unique flat surface, modern housing design
Built-in laser pointer
Automatic Data Hold
Max, Min, DIF, AVG, record
High and low alarm
Adjustable emissivity
Distance (D) to Spot size(S)
D:S=50:1
IR
Laser
(Unit: mm)
Features
User selectable ºC or ºF
8838
8839
*
*
Laser targeting
*
*
Automatic Data Hold
*
*
Auto Power Off
*
*
White Backlit LCD Display
*
*
Overrange indication
*
*
High Temperature
*
*
Max, Min, DIF, AVG record
*
*
High and low alarm
*
*
Adjustable emissivity
*
*
Trigger lock
*
*
Specifications
Range
Response Time
Resolution
Basic Accuracy
Optical Resolution
Emissivity
8838
8839
-50ºC to 1000ºC/
-50ºC to 1000ºC/
-58ºF to 1832ºF
-58ºF to 1832ºF
Less than 1 second
Less than 1 second
0.1ºC/ºF
0.1ºC/ºF
±1.5% of reading
±1.5% of reading
30:1 Distance to Spot size
50:1 Distance to Spot size
Adjustable 0.10~1.0
Adjustable 0.10~1.0
Size(HxWxD): 220mm x 120mm x 56mm
Weight: 290g
Accessories:
9V battery, Carrying case and Gift box
www.ponpe.com
20
2007
contact:
[email protected]
CEM
DT-8818H/8819H/8826H/8828H/8818/8819/8828/8829
Professional High Temperature InfraRed Thermometers
www.cem-meter.com.cn
High Temperature 1000ºC (1832ºF)
16 : 1 distance to spot size
High 16 to 1 distance to target ratio measures smaller surface areas at
greater distances(8818H/8819H/8828H/8826H)
Widest temperature range from -50.0 to 1000ºC (-58.0 to 1832ºF)
Unique flat surface, modern housing design
Built-in laser pointer
Automatic Data Hold
Max, Min, DIF, AVG, record
High and low alarm
Adjustable emissivity
8818/8819/8828 Optical Resolution is 12:1 Distance to Spot size
8829 Optical Resolution is 50:1 Distance to Spot size
Distance (D) to Spot size(S)
D:S=16:1
IR
Laser
(Unit: mm)
Features
8818H/
8819H/
8826H/8828H
8818
8819
/8828
User selectable ºC or ºF
*
*
*
Laser targeting
*
*
*
*
Automatic Data Hold
*
*
*
*
Auto Power Off
*
*
*
*
Backlit LCD Display
*
*
*
*
Overrange indication
*
*
*
*
*
*
High Temperature
8829
*
Max, Min, DIF, AVG record
*/-
*/-
*/*/-
*
High and low alarm
*/-
*/-
*/*/-
*
*/0.95
*/0.95
*/*/0.95
0.95
*/-
*/-
*/*/-
*
Adjustable emissivity
Trigger lock
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Specifications
Range
8818H/8818
8819H/8819
8826H
8828H/8828
8829
-50ºC to 550ºC
-50ºC to 750ºC
-50ºC to 900ºC
-50ºC to 1000ºC
-50ºC to 1000ºC
(-58ºF to 1022ºF)
(-58ºF to 1382ºF)
(-58ºF to 1652ºF)
(-58ºF to 1832ºF)
(-58ºF to 1832ºF)
Distance to Spot size
16:1 Distance to Spot size
Emissivity
Adjustable0.1~1.0 (8818H, 8819H,8826H, 8828H)
50:1 Distance to Spot size
Response Time
Less than 1 second
Resolution
0.1º C/ºF (8818H, 8819H, 8828H,8826H); 0.1º up 200º, 1º over 200º (8818, 8819, 8828, 8829)
Basic Accuracy
± 1.5% of reading or ± 2ºC/± 4ºF
Fixed at 0.95
Size(HxWxD): 220mm x 120mm x 56mm
Weight: 290g
Accessories:
9V battery, Carrying case and Gift box
www.ponpe.com
2007
21
contact:
[email protected]
DT-8878/8879
CEM
Professional High Temperature InfraRed Thermometers with concentric laser pointer
www.cem-meter.com.cn
8878/8879 Series provide fast, easy and accurate readings for most surface
temperature measurements with concentric laser pointer.
High 75 to 1 distance to target ratio measures smaller surface areas at
greater distances (8879)
Widest temperature range from -50.0 to 1200ºC (-58 to 2192ºF)
Type K Input and 20 Point Memory
Unique flat surface, modern housing design
Built-in concentric laser pointer
Automatic Data Hold
Max, Min, DIF, AVG, record
High and low alarm
Adjustable emissivity
Distance (D) to Spot size(S)
D:S=75:1 (8879)
150ms faster sampling time
1% accuracy
IR
(Unit: mm)
Concentric laser pointer
75:1 distance to spot size
Features
8878
8879
User selectable ºC or ºF
*
*
Laser targeting
*
*
Automatic Data Hold
*
*
Auto Power Off
*
*
White Backlit LCD Display
*
*
Overrange indication
*
*
High Temperature
*
*
Max, Min, DIF, AVG record
*
*
High and low alarm
*
*
Adjustable emissivity
*
*
Trigger lock
*
*
Type K input
*
*
20 Point Memory
*
*
Specifications
Range
Optical Resolution
Response Time
8878
8879
-50ºC to 1100ºC/
-50ºC to 1200ºC/
-58ºF to 2012ºF
-58ºF to 2192ºF
50:1 Distance to Spot size
75:1 Distance to Spot size
Less than 150ms
Resolution
0.1º up to 2000º, 1º over 2000º
Basic Accuracy
±1.0% of reading or ±1ºC/±1.8ºF
Emissivity
Adjustable 0.10~1.0
Size(HxWxD): 207mm x 150mm x 56mm
Weight: 362g
Accessories:
9V battery, Carrying case and Gift box.
www.ponpe.com
22
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Compact InfraRed Thermometer with
Dual Laser targeting
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
23
contact:
[email protected]
DT-8866
CEM
Compact InfraRed Thermometer with Dual Laser targeting
www.cem-meter.com.cn
8866 compact Infrared Thermometer provides more faster, easy, and
accurate readings for most surface temperature measurements.
Two laser points converge to a single spot when the unit is at the
optimal distance from the object being measured.
150ms quickest sampling time with 1% accuracy
Built-in dual laser pointers
Wide temperature range from -35.0 to 800°C(-31.0 to 1472ºF)
Adjustable emissivity from 0.10 to 1.0
Unique flat surface, modern housing design
Features
8866
User selectable ºC or ºF
*
Dual laser targeting
*
Automatic Data Hold
*
Auto Power Off
*
White Backlit LCD Display
*
Overrange indication
*
Trigger lock
*
Max display
*
High and low alarm
*
Adjustable emissivity
150ms faster sampling time
1% accuracy
Dual laser pointer
*
High Temperature
Large LCD display
800ºC/1472ºF
Optical Resolution (Distance to Spot size)
EMC
10:1
EN: 50081-1, 50082-1
EN: 60825-1
Specifications
8866
IR Temp. Range
-35ºC to 800ºC/
-31ºF to 1472ºF
IR Temp. Resolution
Optical Resolution
Emissivity
0.1ºC/ºF
10:1 Distance to Spot size
Adjustable 0.10~1.0
Basic Accuracy
±1.0% of reading
Response Time
Less than 150ms
Spectral response
8-14μm
Size(HxWxD): 160mm x 82mm x 42mm
Weight: 177g
Distance (D) to Spot size(S)
D:S=10:1
0.5 in spot @ 5 in
13mm spot @ 130mm
Accessories:
9V battery, Carrying case and Gift box
www.ponpe.com
(Unit: mm)
24
2007
contact:
[email protected]
DT-8822/8823
CEM
Compact InfraRed Thermometers
www.cem-meter.com.cn
8822/8823 Series Wide Range Mini IR Thermometers provide non-contact wide temperature measurements: Food preparation, Safety and Fire inspectors, Plastic molding, Asphalt,
Wide range: -50ºC~760ºC/-58ºF~1400ºF
Marine and Screen Printing, Measure ink and dryer temperature, Diesel and Fleet maintenance.
Targeting objects are easy with the bright laser beam. Even in the dark, the display is easy to
read with the quality backlit scroll.
Unique flat surface, mini modern housing design
Wide range temperature measurements from -50.0ºC to 760ºC(-58.0ºF to 1400ºF)
Built-in laser pointer identifies target area
Backlighting illuminates display for taking measurements at night or in areas
with low background light levels
Overrange indication
Auto Data Hold when trigger released
Auto Power Off
Distance (D) to Spot size(S)
D:S=10:1
IR
Laser
(Unit: mm)
Features
8822
8823
User selectable ºC or ºF
*
*
Laser targeting
*
*
Automatic Data Hold
*
*
Auto Power Off
*
*
White Backlit LCD Display
*
*
Overrange indication
*
*
*
*
High Temperature
Max, Min record
EMC
EN: 50081-1, 50082-1
EN: 60825-1
*
Specifications
Range
8822
8823
-50ºC to 550ºC/
-50ºC to 760ºC/
-58ºF to 1022ºF
-58ºF to 1400ºF
Response Time
Less than 1 second
Basic Accuracy
± 2% of reading or ±2ºC/±4ºF
Optical Resolution
10:1 Distance to Spot size(calculated @80% energy)
Emissivity
Fixed at 0.95
Size(HxWxD): 160mm x 82mm x 42mm
Weight: 177g
Accessories:
9V battery, Carrying case and Gift box.
www.ponpe.com
2007
25
contact:
[email protected]
DT-880/880B/882/883/880H/882H/883H
CEM
Compact InfraRed Thermometers
www.cem-meter.com.cn
Unique flat surface, mini modern housing design
Backlighting illuminates display for taking measurements at night
or in areas with low background light levels
Overrange indication
Auto Data Hold when trigger released
Auto Power Off
Forehead heat detection (880B)
Set Alarm (880B)
Distance (D) to Spot size(S)
D:S=8:1
IR
Laser
(Unit: mm)
Features
880H/880 880B
882H/882
User selectable ºC or ºF
*
Laser targeting
*
*
*
*
Automatic Data Hold
*
*
*
*
EMC
Auto Power Off
*
*
*
*
EN: 50081-1, 50082-1
EN: 60825-1
Backlit LCD Display
*
*
*
Overrange indication
*
*
*
*
*
*
Audible and LED pointer
Low battery indication
*
883H/883
*
White Backlit
*
*
*
Wide range
*
Specifications
Range
Basic Accuracy
Accessories:
9V battery, Carrying case and Gift box.
www.ponpe.com
880H
880B
882H
883H
-50ºC to 500ºC/
-50ºC to 199.9ºC
-50ºC to 700ºC/
-50ºC to 850ºC/
-58ºF to 932ºF
(-58ºF to 199.9ºF)
-58ºF to 1292ºF
-58ºF to 1562ºF
±2% of reading or
±0.4ºC/±0.8ºF & 30ºC~
±2ºC/±4ºF
45ºC/86ºF~113ºF Range
Resolution
0.1º up to 200º,1º over 200º
Response Time
Less than 1 second
Optical Resolution
8:1 Distance to Spot size
Emissivity
Fixed at 0.95
0.1ºC(ºF)
±2% of reading or ±2ºC/±4ºF
0.1º up to 200º, 1º over 200º
Size(HxWxD): 160mm x 82mm x 42mm
Weight: 177g
26
2007
contact:
[email protected]
IR-80/81
CEM
InfraRed Thermometers
www.cem-meter.com.cn
The IR-80 and IR-81 InfraRed Thermometers provide quick non-contact
temperature measurements. Targeting objects are easy with the bright laser
beam. The InfraRed Thermometers are the ideal tools for measuring surface
temperatures. They cut measurement time to almost zero with the ability to
take a temperature reading in a second.
Built-in laser pointer identifies target area
8:1 Distance to Spot size ratio
Data Hold
Automatic range (only IR-81)
Auto Power Off
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Overload and low battery indication
Distance (D) to Spot size(S)
D:S=8:1
IR
Laser
(Unit: mm)
Features
IR-80
IR-81
*
User selectable ºC or ºF
*
Laser targeting
*
*
Data Hold
*
*
Overrange indication
*
*
Auto Power Off
*
*
Backlit LCD Display
*
*
Low battery indication
*
*
Wide range
*
Auto Ranging and high resolution
*
Specifications
Range
Response time
IR-80
IR-81
-50ºC ~ 270ºC
-50ºC ~ 550ºC
(-58ºF ~ 518ºF)
(-58ºF ~ 1022ºF)
Less than 1 second.
Less than 1 second.
1ºC/ºF
0.1º up to 200º, 1º over 200º
Resolution
Basic Accuracy
Optical Resolution
Emissivity
± 2% or ± 2ºC/±4ºF
± 2% or ± 2ºC/±4ºF
8:1 Distance to Spot size ratio
8:1 Distance to Spot size ratio
Fixed at 0.95
Fixed at 0.95
Size(HxWxD): 160mm x 56mm x 40mm
Weight: 108g
Accessories:
9V Battery, holster, Carrying case and Gift box.
www.ponpe.com
2007
27
contact:
[email protected]
DT-8810/8811/8812/8810H/8811H/8812H
CEM
Multifunction InfraRed Thermometers
www.cem-meter.com.cn
8810 Series Non-contact IR Thermometers are
multifunctional and low cost, provide quick non-contact wide range temperature measurements. Targeting
objects are easy with the bright laser beam.
Unique flat surface(8810H/8811H/8812H)
Built-in laser pointer identifies target area
Backlighting illuminates display for taking measurements
at night or in areas with low background light levels
Audible and visible overrange indication
Auto Power Off
Distance (D) to Spot size(S)
D:S=8:1
IR
Laser
(Unit: mm)
Features
8810H/8810 8811H/8811 8812H/8812
User selectable ºC or ºF
*
*
*
Laser targeting
*
*
*
Automatic Data Hold
*
Audible and visible
*
*
*
*
Overrange indication
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Auto Power Off
*
*
*
Backlit LCD Display
*
*
*
Low battery indication
*
*
*
*
*
Wide range
Automatic range
*
Specifications
8810H
8811H
-20ºC to 350ºC/
-20ºC to 500ºC/
-50ºC to 650ºC/
-4ºF to 662ºF
-4ºF to 932ºF
-58ºF to 1202ºF
Response time
Less than 1 second.
Less than 1 second.
Less than 1 second.
Resolution
0.1º up to 200º, 1º over 200º
0.1º up to 200º, 1º over 200º
0.1º up to 200º, 1º over 200º
Basic Accuracy
± 2% of reading or±2ºC/±4ºF
± 2% of reading or±2ºC/±4ºF
± 2% of reading or±2ºC/±4ºF
Optical resolution
8:1 Distance to Spot size
8:1 Distance to Spot size
8:1 Distance to Spot size
Emissivity
Fixed at 0.95
Fixed at 0.95
Fixed at 0.95
Range
8812H
Accessories:
Size(HxWxD): 159mm x 79mm x 57mm
Weight: 180g
www.ponpe.com
9V battery, Clamshell or gift box with carrying case
28
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
3 in 1 IR Thermometer with thermistor probe & thermistor clamp
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
29
contact:
[email protected]
IR-99
CEM
3 in 1 IR Thermometer with thermistor probe & thermistor clamp
www.cem-meter.com.cn
3 IN 1 IR Thermometer with thermistor probe & thermistor clamp
EMC
EN: 50081-1, 50082-1
EN: 60825-1
3 in1 IR Thermometer with thermistor probe & thermistor clamp measures 0.1º resolution
Non-contact temperature measurement up to 230 ºC(446 ºF)
Probe & clamp contact temperature measurement up to 250 ºC(482 ºF)
Data hold & Max/Min Hold
Lock feature for continuous scanning
Fixed emissivity covers 90% of surface applications
Complete with 9V battery
Features
User selectable ºC or ºF
Data Hold
Auto Power Off
Overrange indication
Max, Min record
IR temperature lock
IR with probe & clamp temperature
Specifications
IR Temp. Range
-35ºC to 230ºC/
-31ºF to 446ºF
IR Temp. Resolution
Optical Resolution
Emissivity
0.1ºC/ºF
1:1 Distance to Spot size
Fixed at 0.95
Thermistor Temperature
-40ºC to 250ºC/
Range
-40ºF to 482ºF
Resolution
0.1ºC/ºF
Response Time
Less than 1 second
Basic Accuracy
±2% of reading
Size(HxWxD): 195mm x 53mm x 25mm
Weight: 185g
Accessories:
9V battery, Carrying case and Gift box
www.ponpe.com
30
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Flexible InfraRed Thermometer with Laser Pointer
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
31
contact:
[email protected]
IR-68
CEM
Flexible InfraRed Thermometer with Laser Pointer
16˝ inch Gooseneck detector
www.cem-meter.com.cn
World patent
16˝ inch Gooseneck detector is easy to measure the hard-to-reach areas.
Backlighting illuminates display for measurements at night or in areas with low
background light levels
Overrange indication
Auto Data Hold when measurement released
Auto Power Off
Features
16 inch Gooseneck
User selectable ºC or ºF
Laser targeting
Automatic Data Hold
Auto Power Off
White Backlit LCD Display
Overrange indication
Low battery indication
Specifications
Range
-50ºC to 600ºC
-58ºF to 1112ºF
Response time
Resolution
Less than 1 second
0.1º up to 200º, 1º over 200º
Basic Accuracy
± 2% of reading or ±2ºC/±4ºF
Optical resolution
8:1 Distance to spot size
Emissivity
Fixed at 0.95
Size(HxWxD): 163mm x 45mm x 34mm
Weight: 263g
EMC
EN:50081-1, 50082-1
EN: 60825-1
Distance (D) to Spot size(S)
D:S=8:1
IR
Laser
(Unit: mm)
Accessories:
9V battery, Carrying case and Gift box.
www.ponpe.com
32
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Pocket InfraRed Thermometers
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
33
contact:
[email protected]
IR-66/66B
CEM
Pocket InfraRed Thermometers
www.cem-meter.com.cn
1.5% Accuracy (IR-66B)
300ms faster sampling time (IR-66B)
The IR-66/IR-66B Mini InfraRed Thermometers are new models design with
low cost. Check all types of A/C and heating systems. Monitor performance of
appliances such as refrigerator, dishwasher, freezer and oven. Ensure proper
cooking, grilling and storage temperature.
300ms quickest sampling time with 2.0% accuracy (IR-66B)
1:1 Distance to Spot size ratio
Easy to use : hold it within two feet of the area to be measured and push the button
Large LCD screen shows readings in Fahrenheit or Celsius
Range: -35 to 230ºC/-31 to 446ºF
Mini size design for the ultimate in convenience and portability
Features
User selectable ºC or ºF
*
Automatic Data Hold
*
Auto Power Off
*
Low battery indication
*
Set Min, Max, Lock
*
Lock function
*
EMC
EN: 50081-1, 50082-1
Specifications
IR-66
Range
IR-66B
-35ºC~230ºC/
-35ºC~250ºC/
-31ºF~446ºF
-31ºF~482ºF
Response Time
Less than 1second
Less than 300ms
Resolution
0.1ºC/ºF
0.1ºC/ºF
Basic Accuracy
±2% or ±2ºC/±4ºF
±2.0% or ±2ºC/±4ºF
Optical Resolution
1:1
Emissivity
Fixed at 0.95
Battery
One CR2032 button battery
Size(HxWxD): 75mm x 40mm x 20mm
Weight: 33g
Accessories :
One CR2032 button battery
Packing: Clamshell
www.ponpe.com
34
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Pocket InfraRed Thermometers with Laser Pointer
Applications
Plant/General Maintenance
HVAC/R
Transportation/Automotive
Cooling and Reheating
Serving areas
Food service Equipment
Cold storage
www.ponpe.com
2007
35
contact:
[email protected]
IR-77L/86/87/88/88H
CEM
Pocket InfraRed Thermometers with Laser Pointer
www.cem-meter.com.cn
Laser Pointer
The IR-77L/88/88H series Pocket InfraRed Thermometers are new models
design with lower cost. Check all types of A/C and heating systems. Monitor per-
Measure to 270ºC/518ºF
formance of appliances such as refrigerator, dishwasher, freezer and oven. Ensure
proper cooking, grilling and storage temperatures.
6:1 Distance to Spot
Adjustable Emissivity (88H)
Built-in laser pointer identifies target area
6:1 Distance to Spot size ratio
Data Hold and Max Hold (IR-88/88H)
Fixed emissivity 0.95 covers 90% of surface applications
Adjustable Emissivity (88H)
0.1º resolution (88H)
EMC
EN: 50081-1, 50082-1
Lock for continuous use (88H)
Programmable alarm setpoint (88H)
Specifications
Range
Auto Hold after
Max Hold
release
Begin to
measure
Emissivity: 0.95
IR-77L
IR-86/IR-87/IR-88
IR-88H
-30ºC~270ºC/
-20ºC~270ºC/
-20ºC~270ºC/
-22ºF~518ºF
-4ºF~518ºF
-4ºF~518ºF
Response Time
Less than 1 second
Less than 1 second
Less than 750ms
Resolution
1ºC/ºF
1ºC/ºF
0.1ºC/ºF
Basic Accuracy
±2% or ±2ºC/±4ºF
±2% or ±2ºC/±4ºF
±2% or ±2ºC/±4ºF
Optical Resolution
6:1
6:1
6:1
Emissivity
Fixed at 0.95
Fixed at 0.95
0.1 to 1 (adjustable)
Battery
1.5V AAA battery x 2
1.5V AAA battery x 2
1.5V AAA battery x 2
Temperature
Laser Point
Features
Low battery Indication
IR-77L
IR-86
IR-87
IR-88
IR-88H
User selectable ºC or ºF
*
*
*
*
*
Laser targeting
*
*
*
*
Data Hold
*
*
*
*
*
*
*
Max Hold
Overrange indication
*
*
*
Auto Power Off
*
*
*
*
*
*
*
*
*
Backlit LCD Display
Low battery indication
*
Adjustable Emissivity
*
Set Alarm
*
Size(HxWxD): 97mm x 57mm x 29mm
Weight: 81g
Accessories :
Two “AAA” Batteries, Manual and Holster
Packing: Clamshell
Distance (D) to Spot size(S)
D:S=6:1
Laser
IR
(Unit: mm)
www.ponpe.com
36
*
2007
contact:
[email protected]
IR-82
CEM
InfraRed Temperature Probe
www.cem-meter.com.cn
Features
IR-82
User selectable ºC or ºF
*
Laser targeting
*
Auto Power Off
*
Low battery indication
*
EMC
EN: 50081-1, 50082-1
8:1 Distance to Spot size ratio
Built-in laser pointer
Built-in Analog output of 1 mV/ºC or ºF & ºC/ºF switchable
Specifications
IR-82
Compatible with multimeters, clamp meters, oscilloscope and industrial applications etc
Ideal for applications where object being measured cannot be touched
Range
-35ºC~550ºC/
Response Time
Less than 500ms
Resolution
1mV/ºC or ºF
Basic Accuracy
±2% or ±2ºC/±4ºF
Provides instant and highly repeatable readings
-31ºF~1022ºF
Distance (D) to Spot size(S)
D:S=8:1
Optical Resolution
8:1
Emissivity
Fixed at 0.95
Battery
9V
Size(HxWxD): 166mm x 53mm x 25mm
Weight: 180g
IR
Accessories :
9V battery
Laser
Packing: Clamshell
(Unit: mm)
IR-90/91
Panel InfraRed Thermometers
Features
User selectable ºC or ºF
*
EMC
Automatic Data Hold
*
EN: 50081-1, 50082-1
Auto Power Off
*
Low battery indication
*
Set Min, Max, Lock
*
Specifications
IR-90
IR-91
Range
-35ºC~500ºC/
-35ºC~900ºC/
-31ºF~932ºF
-31ºF~1652ºF
Response Time
Less than 500ms
Less than 500ms
Resolution
0.1ºC/ºF
0.1ºC/ºF
Basic Accuracy
±1.5% or ±2ºC/±4ºF
±1.5% or ±2ºC/±4ºF
Optical Resolution
8:1 Distance to Spot size
50:1 Distance to Spot size
Emissivity
0.1 ~ 1.0 (adujstable)
Power
230 VAC (±10%), 0.1 A, switchable 50/60 Hz
Size(HxWxD): IR-90: 87mm x 51mm x 48mm
IR-91: 98mm x 75mm x 74mm
Weight:
IR-90: 158g
IR-91: 212g
Accessories :
AC power supply
Packing: Gift box with carrying case
www.ponpe.com
2007
37
contact:
[email protected]
BX-350/500
CEM
Portable IR Calibrators
www.cem-meter.com.cn
BX-350/BX-500 portable IR calibrators are used to calibrate long distance
Infrared Thermometer, which are designed as handhold and small calibrators.
Easily certify IR pyrometers to 500°C (932°F)
Large 2.25" (57 mm) blackbody target
RTD reference well for high precision
EMC
EN: 50081-1, 50082-1
Small, compact design
EN: 60825-1
Specifications
BX-350
Temperature
Range
Accuracy
Stability
Target size
BX-500
50ºC ~ 350ºC
50ºC ~ 500ºC
(122ºF ~ 662ºF)
(122ºF ~ 932ºF)
±0.5ºC @ 100ºC
±0.5ºC @ 100ºC
(±1.0ºF @ 212ºF)
(±1.0ºF @ 212ºF)
±1.2ºC @ 350ºC
±1.8ºC @ 500ºC
(±2.4ºF @ 662ºF)
(±3.6ºF @ 932ºF)
±0.1ºC @ 100ºC
±0.1ºC @ 100ºC
(±0.2ºF @ 212ºF)
(±0.2ºF @ 212ºF)
±0.2ºC @ 350ºC
±0.3ºC @ 500ºC
(±0.4ºF @ 662ºF)
(±0.6ºF @ 932ºF)
2.25” (57mm)
2.25” (57mm)
0.95
0.95
Target Emissivity
Resolution
0.1ºC/ºF
0.1ºC/ºF
Heating Time
30 minutes to max
40 minutes to max
Cooling Time
30 minutes max to 100ºC
45 minutes max to 100ºC
Power
230 VAC (±10%), 1.5 A; or 110V AC, 3A
Whether you’re using in-line or handheld infrared pyrometers, you need a high performance calibration standard to verify accuracy. Portable IR Calibrator provides a stable blackbody target for calibrating non-contact IR thermometers up to 500ºC (BX-500).
The portable IR calibrator features a large temperature controlled blackbody target with a diameter of 2.25" (57 mm), which offers a wide field of view
area for optical variations in IR thermometers. With an emissivity of 0.95, the isothermal target can be controlled in set-point increments of 0.1° from
50ºC to 500ºC (BX-500).
The portable IR calibrator is as easy to use as
point-and-shoot. Simply set the desired temperature from the convenient front-panel control buttons; wait a few minutes for equilibrium;
then point the IR gun at the target. The radiated
energy from the blackbody is measured by your
IR thermometer. Now simply compare its reading to the display on the portable IR calibrator
and record the difference.
For even higher precision, a contact calibration
well is located directly behind the blackbody
surface. Using an optional digital RTD thermometer and calibrated secondary probe, accuracies of ±0.1ºC can be achieved.
Size(HxWxD): 180mm x 114mm x 233mm
Weight: 2682g
Accessories:
Carrying case and Gift box.
www.ponpe.com
38
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional Industrial Digital Multimeter
Features
Double molded
IP67 Dust and waterproof
CATIV 600V
CATIII 1000V
www.ponpe.com
2007
39
contact:
[email protected]
DT-9919
CEM
Professional Industrial Digital Multimeter
www.cem-meter.com.cn
The model of the new 9919 is Professional digital multimeter which
provides much more safe measurements with double molded plastic housing
IP67 Dust and waterproof
True RMS
design and IP67 waterproof function. 9919 performance like True RMS AC/
DC voltage and current measurements, 40000 counts resolution and a 0.05%
basic DC accuracy within the reach of more customers. The large LCD display with analog bargraph and backlit ensure that readings are easy to read
High resolution
40000 counts
under all circumstances.
All inputs are protected to EN 610101-1 CATIV 600V/CATIII 1000V.
Safety Conformance
EN61010-1 CAT IV 600V, CAT III 1000V
Full ranges protection
EN
EN
61010-1
61010-1
CATIII
CATIV
1000V
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
40,000 counts high resolution (0.01mV, 0.01μA, 0.01Ω)
Backlit LCD display
True RMS measurement
1000V input protection on all ranges
4-20mA process loop measurements with % readout
Data Hold/MAX/MIN recording mode
Auto Power Off
Peak capture mode
Wide capacitance range
Specifications
Function
Max. Range
Basic Accuracy
Voltage DC
1000 V
±0.06%
Voltage AC
1000V
±1.0%
Current DC
10A
±1.0%
Current AC
10A
±1.5%
Resistance
40MΩ
±0.3%
Duty Cycle
99.9%
±1.2%
Frequency
10MHz
±0.1%
Capacitance
40mF
±3.5%
Temperature
760ºC/1400ºF
±1.0%
Diode Check
Continuity Test
Size(HxWxD): 182mm x 82mm x 55mm
Weight: 360g
Accessories:
Test leads and 9V battery.
Type K temperature probe, gift box with carrying case.
www.ponpe.com
40
2007
contact:
[email protected]
DT-9915/9916/9917/9918/9918T
CEM
Professional Digital Multimeters
www.cem-meter.com.cn
The five models of the new 9915, 9916, 9917, 9918 and 9918T series
IP67 Dust and waterproof
are the new 4000 counts multimeters. They set the standard with a combination of precision, features, easy-to -use, safety and reliability.
9918T has True RMS AC Voltage and Current readings, MAX-MIN
recording, Peak recording, as well as Frequency and Capacitance ranges.
True RMS (9918T)
Safety Conformance
EN61010-1 CAT IV 600V, CAT III 1000V
Full ranges protection
EN
EN
61010-1
61010-1
CATIII
CATIV
600V
1000V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
9915
9916
9917
4000
4000
4000
9918/9918T
4000
True RMS measurement
9918T
Safety design
*
*
*
Relative zero
*
*
*
Data Hold
*
*
*
*
*
MAX/MIN recording mode
Auto Power Off
*
*
*
*
*
Peak capture mode
*
Wide capacitance range
*
20mF
Current DC/AC 40μA
*
Specifications
Function
Max. Range
Basic Accuracy
9915
9916
9917
9918/9918T
Voltage DC
1000 V
±0.5%
*
*
*
*
Voltage AC
1000V
±0.8%
*
*
*
*
Current DC
10A
±1.2%
*
*
*
*
Current AC
10A
±1.8%
*
*
*
*
Resistance
40MΩ
±0.8%
*
*
*
*
Duty Cycle
99.9%
±1.2%
*
*
*
Frequency
10MHz
*
*
Capacitance 200μF/40mF
±1.5%
±3.0%
200μF 20mF
Temperature 760ºC/1400ºF ±3.0%
*
*
200μF
40mF
*
*
Diode Check
*
*
*
*
Continuity Test
*
*
*
*
Size(HxWxD): 182mm x 82mm x 55mm
Weight: 360g
Accessories:
Test leads and 9V battery.
Type K temperature probe (9917/9918/9918T), gift box with carrying case.
www.ponpe.com
2007
41
contact:
[email protected]
DT-9926/9927/9927T/9928/9928B
CEM
Professional Digital Multimeters
www.cem-meter.com.cn
IP67 Dust and waterproof
High resolution
The five models of the new 9926, 9927, 9927T,9928 and 9928B series are the
new 6000 counts multimeters. They set the standard with a combination of precision,
features, easy-to -use, safety and reliability.
True RMS(9927T)
9927T/9928/9928B have True RMS AC Voltage and Current readings, MAXMIN recording.
EN
Safety Conformance
61010-1
CATIII
CATIV
1000V
EN61010-1 CAT IV 600V, CAT III 1000V
Full ranges protection
EN
61010-1
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
9926
9927
9927T
9928
9928B
6000
6000
6000
11000
11000
*
*
*
*
True RMS measurement
Analog bargraph/segment
*/61
*/61
*/61
Safety design
*
*
*
*
Relative mode
*
*
*
*
*
Data Hold
*
*
*
*
*
MAX/MIN recording mode
*
*
*
*
*
Auto Ranging
*
*
*
*
*
Auto Power Off
*
*
*
*
*
1000μF
1000μF
1000μF
110mF
110mF
Wide capacitance range
Specifications
Function
Max. Range
Basic Accuracy
Voltage DC
1000 V
±0.0.9%
9926 9927 9927T 9928 9928B
*
*
*
*
*
Voltage AC
1000V
±0.8%
*
*
*
*
*
Current DC
10A
±1.0%
*
*
*
*
*
Current AC
10A
±1.5%
*
*
*
*
*
Resistance
60MΩ
±0.3%
*
*
*
*
*
Temperature
760ºC/1400ºF ±3.0%
*
*
*
*
Duty Cycle
99.9%
±1.2%
*
*
*
*
*
Frequency
10MHz
±0.1%
*
*
*
*
*
Capacitance
1000μF
±3.0%
*
*
110mF
±3.0%
*
*
Diode Check
*
*
*
*
*
Continuity
*
*
*
*
*
Size(HxWxD): 182mm x 82mm x 55mm
Weight: 360g
Accessories:
Test leads and 9V battery.
Type K temperature probe (9927/9927T/9928), gift box with carrying case.
www.ponpe.com
42
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Compact Digital Multimeters
Features
Double molded
Compact case
CATIV 600V
CATIII 1000V (940/941)
www.ponpe.com
2007
43
contact:
[email protected]
DT-920/920N/921/922
CEM
Compact Digital Multimeters
www.cem-meter.com.cn
920/921/922/920N Series are new compact meters with double
molded plastic housing and over sized high contrast 2000/4000 counts
LCD display. They’re all CAT III rated for 600V. The 920/921/922/
0.5% basic dc accuracy
920N models have auto-ranging function and provides 0.5% basic dc
accuracy.
Double molded plastic housing
Built-in Non-Contact AC Voltage Detector (920N)
Safety Conformance
EN61010-1 CATIII 600V
Double molded plastic housing
EN
61010-1
Full ranges protection
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
Safety design
920/920N
921
922
2000
2000
4000
*
*
Data Hold
*
*
*
Auto Ranging
*
*
Auto Power Off
*
MAX Hold
*
Non-Contact ACV detection
920N
Specifications
Function
Max Range
Basic Accuracy
920/920N
921
922
Voltage DC
600V
±0.5%
*
*
*
Voltage AC
600V
±1.2%
*
*
*
Current DC
10A
±2.5%
*
*
*
Current AC
10A
±3.0%
*
*
Resistance
2MΩ
±0.8%
20MΩ
±0.8%
40MΩ
±0.8%
*
Capacitance
200μF
±3.0%
*
Frequency
10MHz
±1.5%
Temperature
760ºC/1400ºF
±3.0%
Duty Cycle
9.99%
±1.2%
*
*
*
*
*
*
Diode Check
*
*
*
Continuity Test
*
*
*
Size(HxWxD): 150mm x 70mm x 48mm
Weight: 255g
Accessories:
Test leads and 9V battery. type K temperature probe (921/922), gift box with carrying case.
www.ponpe.com
44
2007
contact:
[email protected]
DT-930/931/932/931N/932N
CEM
6000 Counts Compact Digital Multimeters
www.cem-meter.com.cn
930/931/932/931N/932N Series are new compact meters with
double molded plastic housing and over sized high contrast 6000 counts
LCD display. They’re all CAT III rated for 600V.
True RMS (932)
6000 counts LCD display
Double molded plastic housing
Built-in Non-Contact AC Voltage Detector (931N/932N)
EN
61010-1
CATIII
Safety Conformance
600V
EN61010-1 CATIII 600V, CATII 1000V
Double molded plastic housing
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Full ranges protection
Features
930
931/931N
932/932N
6000
6000
6000
61-segments
61-segments
61-segments
Digital display counts
True RMS measurements
Analog bargraph/segments
*
Safety design
*
*
*
Data Hold
*
*
*
MAX/MIN recording mode
*
*
*
Auto Ranging
*
*
*
Auto Power Off
*
Adaptor ACA function
*
Non-Contact ACV detection
*
*
931N
932N
Specifications
Function
Max Range
Basic Accuracy
Voltage DC
1000V
±0.5%
930
*
931/931N 932/932N
*
*
Voltage AC
1000V
±0.8%
*
*
*
Current DC
10A
±1.2%
*
*
*
Current AC
10A
±1.8%
*
*
*
Resistance
60MΩ
±0.8%
*
*
*
Capacitance
1000μF
±3.0%
*
*
*
Frequency
10MHz
±1.5%
*
*
*
Temperature
760ºC/1400ºF
±3.0%
*
*
Duty Cycle
9.99%
±1.2%
*
*
*
Diode Check
*
*
*
Continuity Test
*
*
*
Size(HxWxD): 150mm x 70mm x 48mm
Weight: 255g
Accessories:
Test leads and 9V battery. type K temperature probe (931/931N/932/932N),
gift box with carrying case.
www.ponpe.com
2007
45
contact:
[email protected]
DT-940/941
CEM
Compact Digital Multimeters
www.cem-meter.com.cn
0.5% basic dc accuracy
940 Series are new compact meters with double molded plastic
housing and over sized high contrast 4000 counts LCD display. They’re
all CAT III rated for 1000V.
Double molded plastic housing
1000V input protection on all ranges
Safety Conformance
EN61010-1 CAT IV 600V, CAT III 1000V
Double molded plastic housing
Full ranges protection
EN
EN
61010-1
61010-1
CATIII
CATIV
600V
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
940
941
4000
4000
Safety design
*
*
Data Hold
*
*
Auto Ranging
*
*
Auto Power Off
*
*
1000V input protection on all ranges
*
*
Type K temperature input
*
Specifications
Function
Max Range
Basic Accuracy
940
941
Voltage DC
600V
±0.5%
*
*
Voltage AC
600V
±1.2%
*
*
Current DC
10A
±2.5%
*
*
Current AC
10A
±3.0%
*
*
Resistance
40MΩ
±0.8%
*
*
Capacitance
200μF
±3.0%
*
*
Frequency
10MHz
±1.5%
*
*
Temperature
760ºC/1400ºF
±3.0%
Duty Cycle
9.99%
±1.2%
*
*
*
Diode Check
*
*
Continuity Test
*
*
Size(HxWxD): 150mm x 70mm x 48mm
Weight: 255g
Accessories:
Test leads and 9V battery. K-type temperature probe (941).
www.ponpe.com
46
2007
contact:
[email protected]
CEM
DT-2005B/DT-2008 3 1/2 Digital Multimeters
DT-2006/DT-2009 Auto-ranging Digital Multimeters
www.cem-meter.com.cn
2005B/2008/2009/2006 offer high accuracy and all the
measurement functions you need. They have double molded
plastic housing and oversized high contrast 2000/4000/6000
Large LCD display
counts LCD display with backlight.
EN
61010-1
CATII
1000V
Safety Conformance
All inputs are protected to EN61010-1, CATIII 600V,
CATII-1000V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
2005B
2008
2009
2006
2000
2000
4000
6000
Analog Bargraph / 61 segments
*
MAX / MIN recording mode
*
Auto-ranging function
Double molded plastic housing
*
ºC/ºF switchable
*
*
*
*
*
*
*
*
Data Hold
*
*
*
*
Full overload protection on all ranges
*
*
*
*
Backlit LCD Display
*
*
*
*
BAT symbolic sign
*
*
*
*
Specifications
Function
Max Range
Basic Accuracy
2005B
2008
2009
2006
Voltage DC
1000V
Voltage AC
700V
±(0.5%+2d)
*
*
*
*
±(1.0%+3d)
*
*
*
Current DC
*
20A
±(1.5%+3d)
*
*
*
*
Current AC
20A
±(2.0%+3d)
*
*
*
*
Resistance
20MΩ
±(1.2%+2d)
*
*
40MΩ
60MΩ
Capacitance
200uF
±(4.0%+3d)
*
*
100uF
6000uF
Frequency
20kHz
±(1.5%+5d)
*
9,999MHz
9,999MHz
Temperature
760ºC/1400ºF
±(3.0%+3d)
*
*
*
Diode Check
Continuity Test
Open Voltage 2.8V dc
*
*
*
*
Threshold 30Ω
*
*
*
*
Size(HxWxD): 195mm x 92mm x 38mm
Weight: 380g
Accessories :
2008, 2009 & 2006: Test Leads, Type K temperature probe and 9V battery;
2005B: Test leads and 9V battery, gift box with carrying case.
www.ponpe.com
2007
47
contact:
[email protected]
DT-9905/9908
CEM
High Performance, High Accuracy Digital Multimeters
www.cem-meter.com.cn
Large LCD display
The two models 9905 and 9908 are the only choice for
users who simply want the best meter available.
They have double molded plastic housing and oversized
high contrast 2000 counts LCD display with backlight.
Double molded
IP67 Dust and waterproof
Safety Conformance
EN61010-1 CAT IV 600V, CAT III 1000V
Full ranges protection
Features
Digital display counts
9905
9908
2000
2000
Safety design
*
*
Data Hold
*
*
Backlit LCD Display
*
*
Auto Power Off
*
*
EN
61010-1
CATIII
1000V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Specifications
Function
Max. Range
Basic Accuracy
9905
9908
Voltage DC
1000 V
±0.5%
*
*
Voltage AC
700V
±1.2%
*
*
Current DC
20A
±2.5%
*
*
Current AC
20A
±3.0%
*
*
Resistance
20MΩ
±0.8%
*
*
Temperature
760ºC/400ºF
±3.0%
Frequency
2000Hz
±1.5%
Capacitance
200uF
±3.0%
*
*
*
*
Diode Check
*
*
Continuity test
*
*
Size(HxWxD): 182mm x 82mm x 55mm
Weight: 360g
Accessories:
Test leads and 9V battery.
Type K temperature probe (9908), gift box with carrying case.
www.ponpe.com
48
2007
contact:
[email protected]
DT-991/992/993
CEM
Mini Digital Multimeters
www.cem-meter.com.cn
991 Series Mini Digital Multimeters provide multifunction and lower price. Rugged pocket design is easy and safe
to use with protective holster.
EN
61010-1
CATIII
600V
EMC & LVD
Safety Conformance
EN61010-1 CATIII 600V
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Includes protective holster
10A fused protection
Features
Digital display counts
991
992(Auto)
993(Auto)
2000
2000
4000
*
*
*
*
*
Safety design
Relative zero
*
Data Hold
Protective holster
*
Auto Power Off
*
*
*
*
Specifications
Function
Max Range
Basic Accuracy
991
992
993
Voltage DC
600V
±0.5%
*
*
*
Voltage AC
600V
±1.2%
*
*
*
Current DC
10A
±1.0%
*
*
*
Current AC
10A
±1.0%
Resistance
2MΩ
±0.8%
Capacitance
200uF
±3.5%
Frequency
10MHz
±1.5%
Temperature
760ºC/1400ºF
±3.0%
Duty Cycle
99.9%
±1.2%
*
*
*
20M
40M
*
*
*
*
*
Diode Check
*
*
*
Continuity Test
*
*
*
Size(HxWxD): 121.5mm x 60.6mm x 40mm
Weight: 150g
Accessories:
Test leads, Holster and 9V battery, clamshell.
www.ponpe.com
2007
49
contact:
[email protected]
DT-200 Series
CEM
High Performance Digital Multimeters
www.cem-meter.com.cn
True RMS 202T/204T
200 Series offer a wide range of measurements
including AC/DC Voltage, AC/DC Current, Resistance,
Capacitance and so on. They are suitable for many electronic applications.
Large LCD display
EN
61010-1
CATIII
Safety Conformance
EN61010-1 CATIII 600V
600V
EMC & LVD
EN: 50081-1, 50082-1
Includes protective holster
Full ranges protection
EN: 61010-1, EN: 61010-02-031
Features
200
201
202
202T
True RMS measurements
204
204T
4000
4000
*/41
*/41
*
LCD display counts
4000
4000
*
2000
2000
*
*
*
*
*
*
Data Hold function
*
*
*
*
*
*
Relative function
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Analog Bargraph / segments
Manual ranging
Auto and Manual ranging
MAX / MIN recording mode
Display with backlight
Auto Power Off
Low Battery Indication
*
*
Specifications
Function
Max. Range
Basic Accuracy
202
202T
204
204T
Voltage DC
600V
±(0.8%±2d)
200 201
*
*
*
*
*
*
Voltage AC
600V
±(1.2%±10d)
*
*
*
*
*
*
Current DC
10A
±(1.2%±2d)
*
*
*
*
*
*
Current AC
10A
±(1.8%±7d)
*
*
*
*
Resistance
2000Ω
±(0.8%±2d)
*
*
*
*
*
*
*
*
*
*
40MΩ
±(0.8%±2d)
Temperature
760ºC/1400ºF
±(3.0%±3d)
Duty Cycle
0.1%~99.9%
±(1.2%±2d)
*
*
*
*
Frequency
9.999MHz
±(1.5%±4d)
*
*
*
*
Capacitance
200uF
±(2.5%±5d)
*
*
40mF
Diode Check
Continuity
Bat. Test
*
±(2.5%±5d)
Open voltage 2.8Vdc;
Test current 1mA
Threshold 30Ω
9V(6mA); 1.5V(100mA)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Size(HxWxD): 146mm x 66.2mm x 41.5mm
Weight: 200g
Accessories:
Test leads, K-type temperature probe(201, 202, 202T, 204, 204T)
and 9V battery, gift box.
www.ponpe.com
50
2007
contact:
[email protected]
DT-10/16/16A
CEM
Pocket Digital Multimeters
www.cem-meter.com.cn
DT-10: 4000 counts, 8 functions including DCV, ACV, DCA, ACA, Resistance,
Continuity and Diode test with Data Hold, Low impedance and non-contact ACV
detection.
DT-16/16A: 6000 counts with Min/Max, Data hold and non-contact ACV
detection.
Non-Contact Voltage detection identifies live circuits
Large high contrast 4000 counts LCD display with Analog bargraph (DT-10)
Large high contrast 6000 counts LCD display with Analog bargraph (DT-16/16A)
Auto Power off
Relative, and Data Hold
Built-in storage compartment for integrated test leads
Over-range and low battery indication
EN
Specifications
61010-1
Accessories:
DT-10/16/16A: Test leads, Wallet style case
CATII
600V
EMC & LVD
EN: 50081-1, 50082-1
and one 1.5V L44 button battery.
EN: 61010-1,
EN: 61010-02-031
Function
Max Range
Basic Accuracy
10
16
16A
Voltage DC
600V
±(1.3%±2d)
*
*
*
Voltage AC
600V
±(2.3%±5d)
*
*
*
Resistance
40MΩ
±(2.0%±2d)
*
*
*
60MΩ
±(1.0%±2d)
*
*
*
Continuity
Audible threshold < 50Ω
*
*
Diode test
Test Current 0.6mA
*
*
Frequency
9.999MHz
±(0.8%±5d)
200mA
Current DC
Current AC
±(1.5%±2d)
*
*
4000μA/6000μA ±(2.5%±5d)
*
*
4000μA/6000μA ±(2.5%±5d)
*
*
±(2.5%±5d)
*
*
200mA
*
*
Size(HxWxD): 126mm x 59mm x 32mm
Weight: 124g
Rubber Protection
Oversized high contrast 4000/
Built-in Non-Contact Voltage Detector automatically detects a live
wire when the red LED is lit
6000 counts LCD Display
www.ponpe.com
2007
51
contact:
[email protected]
DT-116/118/118B/119
CEM
3 in 1 e - testers
www.cem-meter.com.cn
Non-Contact Voltage Detection
Flashlight
Digital Multimeter
The four new pocket models 116, 118, 118B and 119 are
double molded plastic housing and large high contrast 2000/4000
counts LCD display. They’re all CAT III 1000V safety designed
plus non-contact voltage detection & flashlight.
Double Molded housing
CAT III 1000V
Safety Conformance
EN61010-1 CATIII 1000V
200mA fused protection (118/118B)
Features
Digital display counts
116
118
118B
119
2000
2000
4000
2000
Safety design
*
*
*
*
Auto Ranging
*
*
*
*
Data Hold
*
*
Auto Power Off
*
*
*
*
*
Flashlight
*
*
*
*
Non-Contact Voltage detection
*
*
*
*
Pocket size
*
*
*
*
EN
EN
61010-1
61010-1
CATIII
CATIV
1000V
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Specifications
Function
Max Range
Basic Accuracy
116
118
118B
119
Voltage DC
600V
±0.5%
*
*
*
*
Voltage AC
600V
±1.2%
*
*
*
*
Current DC
200mA
±2.0%
*
*
*
*
*
40MΩ
Current AC
200mA
±2.5%
Resistance
2MΩ
±0.8%
20MΩ
±0.8%
Capacitance
100uF
±(3.0%±5d)
Frequency
100kHz
±(0.8%±5d)
*
*
*
*
NCV (VAC: 100V~600V)
*
*
*
*
Diode Check
*
*
*
*
Continuity Test
*
*
*
*
Size(HxWxD): 120mm x 55mm x 40mm
Weight: 145g
Accessories:
Test leads and two “AAA” batteries, clamshell.
www.ponpe.com
52
2007
contact:
[email protected]
DT-101/102/2200/5200
CEM
Pocket Digital Multimeters
www.cem-meter.com.cn
DT-101/102 Pocket DMMs
101/102 Series Pocket Digital Multimeters provide multifunction.
Features
101
102
2000
2000
Safety design
*
*
Protective holster
*
*
Pocket size
*
*
Digital display counts
Specifications
Function
Max Range
Basic Accuracy
101
102
Voltage DC
500V
±0.5%
*
*
Voltage AC
500V
±1.8%
*
*
EN
Current DC
200mA
±1.0%
*
*
CATII
Resistance
2MΩ
±0.8%
*
*
*
*
61010-1
600V
Diode Check
Continuity Test
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
*
Size(HxWxD): 101/102: 100mm x 48mm x 26mm
Weight: 101/102: 45g
EN: 61010-02-031
DT-220 Panel Meter
Specifications
Large digital 1999 counts LCD display 220V AC
voltage
Range
300VAC
Resolution
1VAC
Operation without power supply
Neutral and compact size
Accuracy
+/-(0.5FS+2d)
Sampling time
0.5 seconds
High performance and reliability
Hole Size(LxW): 67mm x 40mm x 16mm
Weight: 60g
2200/5200 Pocket Autoranging DMMs
Specifications
These models are wide range multifunctional
pocket size auto ranging DMMs.
They are the best choice for professional and
precise measurements.
Function
Max Range
Basic Accuracy
2200
5200
Voltage DC
500V
±(1.3%±2d)
*
*
Voltage AC
500V
±(2.3%±5d)
*
*
Current DC
300mA
±(2.0%±5d)
*
400mA
±(1.5%±3d)
300mA
±(2.5%±5d)
400mA
±(1.8%±5d)
30MΩ
±(2.0%±2d)
40MΩ
±(1.0%±2d)
Current AC
Resistance
*
*
*
*
*
Continuity
Audible threshold < 50Ω
*
*
Diode test
Test Current 0.6mA
*
Capacitance
200uF
±(3.0%±5d)
*
Frequency
9.999MHz
±(0.8%±5d)
*
*
Size(HxWxD): 2200/5200 : 107.5mm x 64.5mm x 24.5mm
Weight: 2200/5200 : 100g
www.ponpe.com
2007
53
contact:
[email protected]
DT-111/112/113
CEM
Pocket Digital Multimeters
www.cem-meter.com.cn
111/113: 4000 counts, 10 functions including DCV, ACV, DCA, ACA
Resistance, Capacitance, Frequency, Duty Cycle, Continuity and diode test with Data
Hold and Relative functions.
112: 2000 counts, 5 functions with Data Hold , Max Hold and Auto Power Off.
Specifications
EN
61010-1
CATII
600V
Function
Max Range
Basic Accuracy
111
112
113
Voltage DC
500V
±(1.3%±2d)
*
*
*
Voltage AC
500V
±(2.3%±5d)
*
*
*
Resistance
20MΩ
±(2.0%±2d)
40MΩ
±(1.0%±2d)
*
*
*
Continuity
Audible threshold < 50Ω
*
*
*
*
*
Diode test
Test Current 0.6mA
Capacitance
200μF
±(3.0%±5d)
*
*
*
*
*
EMC & LVD
Frequency
9.999MHz
±(0.8%±5d)
EN: 50081-1, 50082-1
EN: 61010-1,
Current DC
400mA
±(1.5%±2d)
*
Current AC
400mA
±(2.5%±5d)
*
EN: 61010-02-031
Size(HxWxD): 113mm x 61mm x 13mm
Weight: 90g
Accessories:
111/112/113: Test leads, Wallet style case and
one CR 2032 button battery.
DT-3216/3218/3219 Pen-type
Digital Multimeters
7 functions Pen-type Digital multimeters
Large 3-3/4 digital LCD display with Bargraph
Full function indication
Diode and audible continuity
Specifications
Function
Max range
Basic accuracy
Voltage DC
600V
±0.8%
Voltage AC
600V
±1.2%
Current DC
±1.5%
3216
3218
3219
*
*
*
*
*
*
CATIII
600V
200mA 340mA 400mA
Current AC
±2.0%
200mA 340mA 400mA
Resistance
±3.0%
20MΩ 30MΩ 40MΩ
Continuity: <35Ω
EN
61010-1
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Diode test: Test voltage max. 3.4V
Size(HxWxD): 230mm x 35mm x 20mm
Weight: 200g
Accessories:
Clamshell, button battery
www.ponpe.com
54
2007
contact:
[email protected]
DT-6500/830BL
CEM
Capacitance Testers and Flashlight DMM
www.cem-meter.com.cn
830BL DMM With Flash Light
Unique built-in flash light plus backlit LCD permit measurements in hard to see or
dark areas
EN
61010-1
31/2 digital backlit LCD(1999 counts) with automatic polarity
3-position light switch: off, flash light and backlight
Safety design
Size(HxWxD): 125mm x 75mm x 25mm
Weight: 190g
CATII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
6500 High Accuracy Capacitance Meter
High accuracy to ±0.5%
Wide range from 0.1pF to 20mF capacitance
Test frequency from 8.2Hz to 820Hz
1999 counts 31/2 digital LCD display
Low battery and function indications
Specifications
Range
Capacitance
200pF, 2nF, 20nF, 200nF, 2uF, 20uF,
Basic Accuracy
±(0.5%+1d)
200uF, 2000uF, 20mF
Size(HxWxD): 145mm x 69mm x 38mm
Weight: 190g
Accessories:
Test leads, gift box with carrying case.
MF-133 & YX-360 Analogue multimeters
MF-133: 5 functions 16 Measuring Ranges including 500V DC, 500V AC and
resistance 200kΩ
YX-360: 8 functions 20 Measuring Ranges including 1000V DC, 1000V AC and
resistance 20MΩ
Fuse and diode protection
Power source: MF-133: R6 (1.5V) x 1; YX-360: 6F22 (9V) x 1, AA(1.5V) x 2
Size(HxWxD): MF-133 : 100mm x 64mm x 33mm
YX-360 : 150mm x 100mm x 35mm
Weight: MF-133 : 95g
YX-360 : 245g
www.ponpe.com
2007
55
contact:
[email protected]
DT-9930/9931
CEM
11000 Counts LCR Meter
www.cem-meter.com.cn
9930 is new 11000 Counts LCR Meter
9931 is new 11000 Counts LCR Meter with digital multimeter
IP67 Dust and waterproof
Safety Conformance
EN61010-1 CAT IV 600V, CAT III 1000V
Full ranges protection
Features
Double molded plastic housing
Digital display counts
9930
9931
11000
11000
Safety design
*
*
Data Hold
*
*
MAX/MIN recording mode
*
*
Auto Ranging
*
*
Auto Power Off
*
*
DMM + LCR
*
Specifications (Multimeter)
9930
EN
Function
Max Range
Basic Accuracy
Voltage DC
1000V
±0.5%
9931
*
Voltage AC
1000V
±0.8%
*
Current DC
1.1A
±1.2%
*
Current AC
1.1A
±1.8%
*
Frequency
10MHz
±1.5%
*
EMC & LVD
EN: 50081-1, 50082-1
Duty Cycle
9.99%
±1.2%
*
EN: 61010-1, EN: 61010-02-031
Diode Check
*
*
Continuity Test
*
*
61010-1
CATIII
600V
Specifications (LCR)
Function
Range
Resolution
Accuracy
Resistance
110.00Ω
0.01Ω
±1.2% of rdg ±5 digits
(Auto-ranging)
1.1000KΩ
1Ω
11.000KΩ
1Ω
110.00KΩ
10Ω
Capacitance
Inductance
1.1000MΩ
100Ω
11.000MΩ
1KΩ
110.00MΩ
10KΩ
±1.2% of rdg ±8 digits
±1.2% of rdg ±8 digits
11.000nF
1pF
±5.0% of rdg ±30 digits
110.00nF
1pF
±5.0% of rdg ±15 digits
1.1000nF
0.1nF
11.000nF
1nF
110.00nF
0.01uF
1.1000nF
0.1uF
11.000nF
1uF
110.00nF
10uF
±3.0% of rdg ±10 digits
±10% of rdg ±10 digits
±(2%+5)
11mH
1uH
110mH
1uH
11H
1mH
±(5%+5)
110H
1mH
±(5%+15)
www.ponpe.com
Size(HxWxD): 150mm x 70mm x 48mm
Weight: 255g
Accessories:
Test leads and 9V battery, gift box with carrying case.
56
2007
contact:
[email protected]
DT-9980/9981
CEM
Professional Digital Multimeters
www.cem-meter.com.cn
The two models of the new 9980 and 9981series are the new benchmark multimeters. They set the standard with a combination of precision,
features, easy-to -use, safety and reliability.
They have True RMS AC Voltage and Current readings, MAX-MIN
recording, Peak recording, as well as Frequency and Capacitance ranges.
IP67 Dust and waterproof
True RMS
Safety Conformance
EN61010-1 CAT IV 600V, CAT III 1000V
Full ranges protection
High resolution
40000 counts
EN
EN
61010-1
61010-1
CATIII
CATIV
1000V
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
9980
9981
40000
40000
True RMS measurement
*
*
Safety design
*
*
4-20mA process loop measurements with % readout
*
*
Data Hold
*
*
MAX/MIN recording mode
*
*
Auto Power Off
*
*
Peak capture mode
*
*
Wide capacitance range
*
*
Specifications
Function
Max. Range
Basic Accuracy
9980
9981
Voltage DC
1000 V
±0.5%
*
*
Voltage AC
1000V
±0.8%
*
*
Current DC
10A
±1.2%
*
*
Current AC
10A
±1.8%
*
*
Resistance
40MΩ
±0.8%
*
*
Duty Cycle
99.9%
±1.2%
*
*
Frequency
10MHz
±1.5%
*
*
±3.0%
40mF
40mF
Capacitance 40mF
Temperature 760ºC/1400ºF ±1.0%
*
Diode Check
*
*
Continuity Test
*
*
Size(HxWxD): 215mm x 93mm x 60mm
Weight: 450g
Accessories:
Test leads and 9V battery.
Type K temperature probe, gift box with carrying case.
www.ponpe.com
2007
57
contact:
[email protected]
DT-9932FC
CEM
Professional Auto-ranging PC Interface DMM
The 9932FC is the preferred model for a large number of professionals.
www.cem-meter.com.cn
CAT III 1000V
It is perfectly suited for many electronic applications and has the optional
RS-232 cable and Windows compatible software allows user to collect, display,
plot and save data.
EN
EN
61010-1
61010-1
CATIII
CATIV
1000V
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Safety Conformance
EN61010-1, CATIII 1000V
Input Warning: Audible and visual alerts if test lead connections
do not match function selected
Features
Oversized high contrast 4000 counts backlight LCD Display
Safety Warning LCD-Annunciator
Optically isolated PC interface
Data Hold
Auto Power Off
Overload protection
Power: Standard 9V battery (NEDA 1604, IEC 6F22)
Specifications
Function
Max Range
Min Resolution
Basic Accuracy
Voltage DC
1000V
0.1mV
±(1.2%+2d)
Voltage AC
750V
0.1mV
±(0.8%+3d)
Current DC
20A
0.1uA
±(1.5%+3d)
Current AC
20A
0.1uA
±(1.8%+5d)
Resistance
40MΩ
0.1Ω
±(1.0%+2d)
Capacitance
100uF
10pF
±(3.5%+5d)
Frequency
9.999MHz
0.001Hz
±(1.2%+3d)
Duty Cycle
99.9%
0.1%
±(1.2%+2d)
Temperature
1000ºC/1832ºF
0.1ºC/ºF
±(3%+2ºC/ºF)
Diode Check
Continuity Check
1.5V dc test 0.3mA current
Threshold 30Ω, continuity beeper 2.7kHz
Size(HxWxD): 197mm x 88.4mm x 41.2mm
Weight: 635g
Accessories :
Rubber holster, Test leads, K-type temperature
probe, 9V battery, RS-232 PC cable and Software
diskette.
www.ponpe.com
58
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional AC, AC/DC
Digital Clamp Meters
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
www.ponpe.com
2007
59
contact:
[email protected]
DT-3366/3368
CEM
True RMS 1000A AC, AC/DC Clamp Meters
www.cem-meter.com.cn
1000A True RMS
3366/3368 Professional True RMS 1000A AC, AC/DC
Clamp Meters provide accurate Inrush current measurement.
6600 counts digital LCD display with backlit
Inrush current measurement
1.2” (30mm) Clamp jaw opening
Inrush current measurement
Type K temperature measurement
Data hold function
DCA Zero function
Over-range indication
EN
Low battery indication
Auto Power Off
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
3366
3368
Inrush current function
*
*
True RMS AC Voltage and Current
*
*
1.2˝(30mm) Clamp Digital display
*
*
Electronic overload protection
*
*
Continuity buzzer & Diode check
*
*
Data Hold function
*
*
DCA Zero function
*
Auto Power Off
*
*
Low battery indication
*
*
AC current
*
AC/DC Current
Specifications
Function
Max Range
Max. Resolution
Basic Accuracy
3366
3368
AC Current
1000 A
0.1A
±(2.5%+5d)
*
*
DC Current
1000 A
0.1A
±(2.8%+4d)
AC Voltage
600V
0.1mV
±(1.0%+2d)
*
*
DC Voltage
600V
0.1mV
±(0.8%+4d)
*
*
Resistance
40MΩ
0.1Ω
±(1.0%+4d)
*
*
Frequency
10MHz
0.01MHz
±(1.2%+3d)
*
*
Capacitance
40mF
0.01mF
±(3.0%+3d)
*
*
Duty Cycle
10.0 to 94.9%
0.1%
±(1.2%+3d)
*
*
*
Temperature
760ºC/1400ºF
1ºC/ºF
±(3.0%+5d)
*
*
Inrush current
1000A
0.1A
±(2.0%+5d)
*
*
Continuity check
Threshold 40Ω, test current <0.5mA
Diode test
test current of 0.3mA typical, open circuit voltage <3V DC typical
Size(HxWxD): 229mm x 80mm x 49mm
Weight: 303g
Accessories:
Test leads, gift box with carrying case & 9V battery
www.ponpe.com
60
2007
contact:
[email protected]
DT-3360/3361/3363/3367
CEM
1000A AC, AC/DC Clamp Meters
www.cem-meter.com.cn
Double molded housing
1000A Clamp Meters
3360/3361/3363/3367 series professional 1000A AC, AC/DC clamp meters provide multi-function for 1000A AC, AC/DC, voltage, resistance, capacitance,
Frequency, Temperature, duty cycle and continuity. These series are with 6000 counts
digital LCD display and analog bargraph.
EN
6000 counts digital LCD display
Analog Bargraph/Segments
CATIII
Electronic overload protection
Continuity buzzer & diode check
61010-1
600V
Data hold function
DCA Zero function
EMC & LVD
EN: 50081-1, 50082-1
Max/Min function
Low battery indication
EN: 61010-1, EN: 61010-02-031
Auto power off
True RMS measurement(DT-3367)
Features
Digital display counts
3360
3361
3363
3367
6000
6000
6000
6000
Electronic overload protection
*
*
*
*
Continuity buzzer & Diode check
*
*
*
*
Data Hold function
*
*
DCA Zero function
*
*
*
*
Min/Max Hold function
*
*
*
*
Auto Power Off
*
*
*
*
Low battery indication
*
*
AC/DC Current
*
*
*
*
True RMS measurements
*
Specifications
Function
Max Range
Basic Accuracy
Max. Resolution
DC Current
1000A
±(2.5%+5d)
1mA
AC Current
1000A
±(3.0%+4d)
10mA
*
*
DC Voltage
600V
±(0.8%+2d)
0.1mV
*
AC Voltage
600V
±(1.0%+4d)
0.1mV
*
Resistance
60MΩ
±(1.0%+4d)
0.1Ω
*
*
*
*
Capacitance
1000μF
±(3.0%+5d)
0.01nF
*
*
*
*
Frequency
10MHz
±(1.2%+3d)
0.001Hz
*
*
*
*
Duty Cycle
99.9%
±(1.2%+3d)
0.1%
*
*
*
*
Temperature
1000ºC/1832ºF ±(3.0%+3d)
*
*
*
0.1ºC/ºF
3360 3361
3363
3367
*
*
*
*
*
*
*
*
*
*
Size(HxWxD): 229mm x 80mm x 49mm
Weight: 303g
Accessories:
Test leads, gift box with carrying case & 9V battery
Temperature probe(3361/3363/3367)
www.ponpe.com
2007
61
contact:
[email protected]
DT-3343T/3344/3345/3347
CEM
1000A AC, AC/DC True RMS Clamp Meters
www.cem-meter.com.cn
1000A True RMS
Peak Hold Function
3343T/3344/3345/3347 Series Professional True RMS Clamp Meters provide
accurate AC, AC/DC Current and Voltage readings regardless of waveforms. These
meters can be used in most industrial and commercial applications where non-linear
loads distort the Current or Voltage waveform.
EN
61010-1
CATIII
Double molded housing
600V
Electronic overload protection
Auto Power Off
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
True RMS measurements
Digital display counts
3343T
3344
3345
3347
*
*
*
*
4000
4000
4000
4000
Electronic overload protection
*
*
*
*
Analog Bargraph/segments
*
* /41
* /41
* /41
Continuity buzzer & Diode check
*
*
*
*
Data Hold function
*
*
*
*
*
*
*
*
*
*
Peak Hold function
DCA Zero function
*
Auto Power Off
*
*
Low battery indication
*
*
*
*
AC/DC Current
*
AC Current
AC Current
*
Specifications
Function
Max Range
Basic Accuracy Max. Resolution
3343T
3344
3345
3347
AC Current
1000 A
±(2.5%+5d)
10mA
*
*
*
*
DC Current
1000 A
±(3.0%+4d)
10mA
*
AC Voltage
600V
±(0.8%+2d)
0.1mV
*
*
*
DC Voltage
600V
±(1.0%+4d)
0.1mV
*
*
*
*
Resistance
40MΩ
±(1.0%+4d)
0.1Ω
*
*
*
*
Capacitance
40mF
±(3.0%+5d)
0.01nF
100μF
*
*
*
Frequency
10MHz
±(1.2%+3d)
0.01MHz
*
*
*
*
Temperature
1000ºC/1832ºF
±(3.0%+5d)
1ºC/ºF
*
*
*
*
*
Size(HxWxD): 229mm x 80mm x 49mm
Weight: 303g
Accessories:
Test leads, gift box with carrying case, 9V battery and Temperature probe (3343T/3345/3347)
www.ponpe.com
62
2007
contact:
[email protected]
DT-3340/3341/3342/3343
CEM
1000A AC, AC/DC Clamp Meters
www.cem-meter.com.cn
3340/3341/3342/3343 Series Professional AC, AC/DC Clamp Meters provide
many functions for professional AC, AC/DC measurements including resistance, caDouble molded housing
pacitance and diode test, etc. With mid- size and tear-drop shaped jaw, it is easy to
use in crowded cable areas and other tight places.
1000A Clamp Meters
EN
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
3340
3341
3342
3343
2000
4000
2000
4000
Electronic overload protection
*
*
*
*
Continuity buzzer & Diode check
*
*
*
*
Data Hold function
*
*
*
*
DCA Zero function
*
MAX Hold function
*
Auto Power Off
*
*
*
Low battery indication
*
*
*
*
AC/DC Current
*
Specifications
Function
Max Range
Basic Accuracy
Max. Resolution
3340 3341
3342
3343
DC Current
1000A
±(2.5%+5d)
1mA
AC Current
1000A
±(3.0%+4d)
10mA
*
*
*
*
DC Voltage
600V
±(0.8%+2d)
0.1mV
*
*
*
*
AC Voltage
600V
±(1.0%+4d)
0.1mV
*
*
*
*
*
*
20MΩ
±(1.0%+4d)
0.1Ω
40MΩ
±(1.0%+4d)
0.1Ω
*
*
Capacitance
100.0nF
±(3.0%+5d)
0.01nF
*
*
Frequency
10MHz
±(1.2%+3d)
0.001Hz
*
20kHz
±(1.2%+3d)
0.01kHz
100kHz
±(1.2%+3d)
0.001Hz
Duty Cycle
99.9%
±(1.2%+3d)
0.1%
*
Temperature
1000ºC/1832ºF ±(3.0%+3d)
0.1ºC/ºF
*
Resistance
*
*
*
*
*
*
Size(HxWxD): 229mm x 80mm x 49mm
Weight: 303g
Accessories:
Test leads, gift box with carrying case & 9V battery, two “AAA” batteries(3340)
Temperature probe(3341/3343)
www.ponpe.com
2007
63
contact:
[email protected]
DT-3348
CEM
True RMS 1000A AC/DC Watt Clamp Meter
www.cem-meter.com.cn
1000A True RMS
3348 Professional True RMS 1000A AC/DC Watt Clamp
Meter provides accurate Watt, AC/DC Current and Voltage readings regardless of waveforms.
DC/AC True Power to 240kW
Double molded housing
Auto Power Off
EN
61010-1
CATIII
600V
EMC & LVD
Features
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
True RMS AC Voltage and Current
DC and AC True Power to 240kW
1.2˝(30mm) Clamp Digital display
Electronic overload protection
Continuity buzzer & Diode check
Data Hold function
DCA Zero function
Auto Power Off
Low battery indication
AC/DC Current
Specifications
Function
Max Range
Max. Resolution
Basic Accuracy
AC Current
1000 A
0.1A
±(2.5%+5d)
DC Current
1000 A
0.1A
±(3.0%+4d)
AC Voltage
600V
0.1mV
±(0.8%+2d)
DC Voltage
600V
0.1mV
±(1.0%+4d)
Resistance
40MΩ
0.1Ω
±(1.0%+4d)
Frequency
10MHz
0.01MHz
±(1.2%+3d)
AC Power
240kW
10W
±(3.0%+5d)
DC Power
240kW
10W
±(2.5%+5d)
Size(HxWxD): 229mm x 80mm x 49mm
Weight: 303g
Accessories:
Test leads, gift box with carrying case & 9V battery
www.ponpe.com
64
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Compact AC, AC/DC
Digital Clamp Meters
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
www.ponpe.com
2007
65
contact:
[email protected]
DT-360/361/362/363/366
CEM
Compact AC, AC/DC Autoranging Clamp Meters
www.cem-meter.com.cn
Inrush current (366)
The 360 series clamp meters offer all the features you need to fit the way you work. The small
bodies and jaws fit perfectly in your hand and into tight places. Meter controls are positioned so
that current measurements can be done with one hand. A large backlit display (on most models) is
easy to see and a handy Display Hold keeps measurements on the display. Measuring starting
current for motors, lighting, etc. is easy with the inrush current function (on most models).
True RMS (363/366)
Double molded plastic housing
Inrush current function (366)
Auto Power Off
Features
360
361
362
363
366
AC
AC
AC/DC
AC/DC
AC/DC
Current measurement
1mA
1mA
10mA
10mA
10mA
LCD display counts
2000
4000
4000
4000
6000
*
*
Max. Resolution to
AC True RMS
Display with backlight
*
*
*
*
*
Data Hold
*
*
*
*
*
Max Hold
*
*
*
*
*
Zero Function
Auto Power Off
*
*
*
*
*
Low battery indication
*
*
*
*
*
*
*
*
AC/DC Current
Peak Current
*
Inrush Current
*
EN
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Specifications
Function
Max Range
Basic Accuracy
360
361
362
363
366
Voltage DC
600V
±(0.5%+1d)
*
*
*
*
*
Voltage AC
600V
±(1.5%+2d)
*
*
Current DC
400A
±(2.0%+5d)
Current AC
400A
±(2.5%+4d)
Resistance
60MΩ
±(3.0%+5d)
Temperature
1000ºC/ 1832ºF ±(3.0%+3d)
Capacitance
100uF
±(2.5%+5d)
*
Frequency
10MHz
±(1.2%+2d)
*
Inrush Current
600A
±(1.5%+2d)
Continuity check
Diode test
*
*
*
*
*
*
*
600A
*
*
20MΩ 40MΩ 40MΩ 40MΩ
*
*
*
*
*
40mF 60mF
*
*
*
Buzzer sounds at 50Ω
*
*
*
*
*
Test current 0.3mA
*
*
*
*
*
Size(HxWxD): 197mm x 70mm x 40mm
Weight: 183g
Accessories:
Test leads, gift box with carrying case, Temperature probe(361, 363, 366 only) and
9V battery.
www.ponpe.com
66
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
3 in 1 Mini AC, AC/DC Clamp Meters
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
www.ponpe.com
2007
67
contact:
[email protected]
FC-31/32/33/35
CEM
3 in 1 Mini AC, AC/DC Clamp Meters
www.cem-meter.com.cn
FC-35 includes function: A,V, Ω, Diode and Continuity
Non-Contact Voltage Detector
Flashlight
The FC-31/32/33/35 Series are designed to verify the presence of
load current, Non-contact Voltage and Flashlight, etc. The small bodies
and jaws fit perfectly in your hand and a large backlit display is easy to
Digital Clamp Meter
read.
EN
61010-1
CATII
600V
EMC & LVD
Features
Rubber Protection
31
32
33
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
35
AC/DC Voltage, Resistance, Continuity, Diode check
*
Digital display counts
2000
2400
2400
2000
Jaw opening
0.7˝
0.7˝
0.7˝
0.7˝
*
*
*
*
Non-contact Voltage detector and Flashlight
Non-contact Frequency measurements
*
AC/DC Current
*
*
*
*
*
*
AC/DC Leakage Current Tester
*
Data Hold function
*
MAX Hold function
*
*
DCA Zero function
Auto Power Off
*
*
*
Low battery indication
*
*
*
*
*
*
*
Backlight Display
*
Specifications
Function
Max Range
Basic Accuracy
Max. Resolution
2A
±(3.0%+8d)
1mA
AC Current 20A
±(3.0%+8d)
10mA
80A
±(3.0%+8d)
100mA
200A
±(3.0%+8d)
100mA
±(2.8%+8d)
1mA
80A
±(2.8%+8d)
100mA
200A
±(3.0%+8d)
100mA
DC Current 2A
31
32
33
35
*
*
*
*
*
*
*
*
*
*
40~51Hz
±(1.2%+5d)
0.01Hz
*
51~510Hz
±(1.2%+3d)
0.1Hz
*
0.51~1kHz
±(1.2%+3d)
0.001kHz
*
Voltage DC 600V
±(0.5%+1d)
0.1mV
Voltage AC
600V
±(1.5%+2d)
0.1mV
*
Resistance
20MΩ
±(3.0%+5d)
0.1Ω
*
Continuity
Buzzer sounds at 100Ω
Diode
Open circuit voltage 1.5V, Test current 0.3mA
Frequency
Non-contact Voltage detection : 100~600VAC
*
*
*
*
*
*
*
Size(HxWxD): FC-31/32/33: 164mm x 65mm x 32mm
FC-35:178mm x 65mm x 32mm
Weight:
FC-31/32/33:151g
FC-35:170g
Accessories:
Test leads (FC-35), clamshell with carrying case, and Two (AAA)1.5V batteries.
www.ponpe.com
68
2007
contact:
[email protected]
DT-337
CEM
Mini AC/DC Clamp Meter
www.cem-meter.com.cn
High Resolution
Features
Jaw opens to 0.5˝
1mA high resolution
Digital clamp tester for AC/DC current measurement
Providing wide measuring range from very small to large current
Designed to safety standard IEC 61010-2-032: CAT.III, 600V and pollution degree 2.
Data hold and Max hold function
Dynamic range of 4000 counts full scale
Auto power off
Specifications
Function
Range
Min Resolution
Basic Accuracy
Current AC
4A, 80A
1mA
±(2.5%+5d)
Current DC
4A, 80A
1mA
±(2.5%+4d)
Voltage AC
400mV~600V
0.1mV
±(2.0%+4d)
Voltage DC
400mV~600V
0.1mV
±(1.5%+3d)
Resistance
400Ω~40MΩ
0.1Ω
±(1.5%+2d)
Frequency
5Hz~10MHz
0.001Hz
±(1.2%+3d)
% Duty
5%~99.9%
0.1%
±(1.2%+3d)
Diode Check
Test current of 0.3mA, Open circuit voltage 1.5V
Continuity Check
Threshold 50Ω, continuity beeper 2.7kHz
Size(HxWxD): 210mm x 70mmx 37mm
Weight: 200g
EN
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Accessories:
Test leads, Gift box with carrying case, 9V battery.
www.ponpe.com
2007
69
contact:
[email protected]
DT-330 Series
CEM
Mini AC, AC/DC Autoranging Clamp Meters
www.cem-meter.com.cn
The 330 series are designed to verify the presence of load current, voltage and resistance, etc.
The small bodies and jaws fit perfectly in your hand and a large backlit display is easy to read.
Test lead μA range with high 0.1μA resolution for HVAC and Process control
applications (335/336 only)
Data Hold freeze the displayed value
EN
Auto Power Off
61010-1
CATIII
600V
Features
330
Max. Resolution to
Current measurement
LCD display counts
331
332
333
332T
333T
335
336
AC
AC
AC/DC
AC/DC
AC/DC
AC/DC
1mA
1mA
10mA
10mA
0.1uA
0.1uA
2000
2000
4000
4000
4000
4000
332T
333T
AC True RMS
Display with backlight
*
*
*
*
*
*
Data Hold
*
*
*
*
*
*
Max Hold
*
*
*
*
*
*
Zero Function
Auto Power Off
*
*
*
*
*
*
Low battery indication
*
*
*
*
*
*
*
*
AC/DC Current
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Specifications
Function
Max Range
Basic Accuracy
330
331
332
333
335
336
Voltage DC
600V
±(0.5%+1d)
*
*
*
*
*
*
Voltage AC
600V
±(1.5%+2d)
*
*
*
*
*
*
Current DC
400A
±(2.5%+5d)
*
*
Current AC
400A
±(3.0%+4d)
*
*
*
*
*
*
Resistance
20MΩ
±(3.0%+5d)
*
*
*
*
*
*
Temperature
1000ºC/ 1832ºF
±(3.0%+3d)
*
*
Capacitance
100uF
±(2.5%+5d)
*
*
*
Frequency
150KHz
±(1.2%+2d)
*
*
*
*
10MHz
*
*
Continuity
Buzzer sounds at 100Ω
*
*
*
*
*
*
Diode
Test current 0.3mA;
*
*
*
*
*
*
Open circuit voltage 1.5V
Size(HxWxD): 205mm x 70mm x 37mm
Weight: 200g
Accessories:
Test leads, gift box with carrying case, Temperature probe(331, 333,
335 only) and Two(AAA) 1.5V batteries.
www.ponpe.com
70
2007
contact:
[email protected]
DT-9700 Series
CEM
AC/DC Clamp Meters
www.cem-meter.com.cn
EN
True RMS 9700T
61010-1
CATII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
The 9700 Series are designed to measure current, voltage, resistance,
temperature, capacitance, diode and continuity, etc. They offer all the features
you need to fit the way you work.
9700T is True RMS AC/DC Current meter
Large LCD display with full function indication
Auto Power Off and Data Hold
One touch“Auto Zero” for DCA measurements
Features
9701
9702
9703
9704
9700FC
9700T
0.9"
0.9"
0.9"
1.2"
1.2''
1.2''
*
*
*
Jaw opening
Auto-ranging
Manual-ranging
*
*
*
Auto Power Off
*
*
*
*
*
*
Data Hold
*
*
*
*
*
*
Low battery indication
*
*
*
*
*
*
AC/DC Current
*
*
*
*
*
*
True RMS
*
Temperature
*
*
*
*
Specifications
Functions
Max Range
Resolution Basic Accuracy 9701 9702 9703 9704 9700FC 9700T
Voltage DC
600V
0.1mV
±(0.8%±2d)
*
*
*
*
*
*
Voltage AC
600V
0.1mV
±(1.5%±3d)
*
*
*
*
*
*
Current DC
200A
10mA
±(2.5%±3d)
*
*
*
*
*
*
*
*
*
*
*
Current AC
Resistance
Temperature
400A
100mA
600A
1A
200A
10mA
*
±(3.0%±4d)
400A
100mA
600A
1A
2000Ω
1Ω
±(1.0%±2d)
40MΩ
0.01MΩ
±(1.2%±4d)
1370ºC/2000ºF
1ºC/ºF
±(3%±3d)
<25Ω
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Duty Cycle
0.1%~99.9%
0.1%
±(1.2%±2d)
*
Frequency
9.999MHz
0.01Hz
±(0.8%±3d)
*
Capacitance
200uF
0.1uF
±(3.5%±5d)
*
9700FC, 9700T only), Test leads, gift box
with carrying case and 9V battery.
Weight: 9701/9702/9703: 225g
9700FC/9700T/9704: 285g
71
*
*
Size(HxWxD): 9701/9702/9703: 181mm x 43mm x 30mm
9700FC/9700T/9704: 209mm x 43mm x 30mm
2007
*
*
Accessories:
K-type thermocouple probe (9701, 9703,
www.ponpe.com
*
*
Diode Check
Continuity Check
*
*
*
*
*
contact:
[email protected]
DT-9800 Series
CEM
Professional AC, AC/DC Clamp Meters
www.cem-meter.com.cn
True RMS 9800T
AC, AC/DC Clamp-on Meters offer the convenience of a current clamp with the
versatility of a multimeter. They are ideal for non-invasive current measurements above a
few amps and include all the popular multimeter functions/features demanded by the
knowledgeable technician.
9800T True RMS Professional AC/DC Clamp Meters provides accurate voltage readings regardless of waveforms.
EN
61010-1
CATII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Features
9800T
9803
9805
9806
*
*
*
*
4000
True RMS measurements
*
Electronic overload protection
LCD display counts
4000
2000
4000
Continuity buzzer & Diode check
*
*
*
*
Data Hold function
*
*
*
*
Peak Hold function
*
*
Auto Power Off
*
*
*
*
Low battery indication
*
*
*
*
AC/DC Current
*
Specifications
Function
Max Range
Basic Accuracy
9800T
9803
9805
9806
Current AC
600A
±(2.5%+5d)
*
*
*
*
Current DC
600A
±(2.5%+4d)
*
Voltage AC
600V
±(2.0%+4d)
*
*
*
*
Voltage DC
600V
±(1.5%+3d)
*
*
*
*
Resistance
40MΩ
±(1.5%+2d)
*
2000Ω
*
*
Capacitance
100uF
±(3.5%+5d)
*
Frequency
9.999MHz
±(1.2%+3d)
Temperature
760ºC/1400ºF
±(3.0%+5d)
Diode test
Test current of 0.3mA,
*
*
*
*
*
*
*
*
Open circuit voltage 1.5V
Size(HxWxD): 203mm x 79mm x 41mm
Weight: 185g
Accessories:
Test leads, gift box with carrying case and Temperature probe(9800T, 9805 only)
www.ponpe.com
72
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Compact AC, AC/DC
Digital Clamp Meters
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
www.ponpe.com
2007
73
contact:
[email protected]
DT-9809/9810
CEM
AC Leakage Current Testers
www.cem-meter.com.cn
AC leakage current tester 9809 is multifunction clamp meter with very
good resolution of 10uA. It is very useful for power system check and
installation. With the measuring range up to 100A, this tester is great for appliance installation or for car applications
10uA high resolution
Large 33/4 (4000 counts) LCD display
Auto Power Off
EN
61010-1
CATII
Shielded transformer jaw opens to 1.2”
Max/Min, Data Hold, Low battery indication
600V
EMC & LVD
EN: 50081-1, 50082-1
Overload protection
EN: 61010-1,
EN: 61010-02-031
Specifications
Function
Range
Resolution
Basic Accuracy
Current AC
40mA~100A
10uA~100mA
±(2.0%+3d)
Voltage AC
400V
0.1V
±(1.5%+10d)
Resistance
40~400Ω
0.1Ω
±(1.0%+2d)
Continuity Test
Threshold 40Ω, Continuity Beeper 2.5KHz
Size(HxWxD): 209mm x 43mm x 30mm
Weight: 200g
Accessories:
Test leads, holster, gift box with carrying case, 9V battery
DT-9810
Mini AC Leakage Current Tester
Shielded transformer jaw opens to 1.2˝
100μA high resolution
Least affected by external magnetic field, providing wide measuring range from very small
EN
61010-1
to large current
Designed to safety standard IEC 61010-2-032: over-voltage CAT.III, 300V and pollution
CATII
600V
EMC & LVD
EN: 50081-1, 50082-1
degree 2.
Data hold function to allow for easy reading in dimly lit or hard-to-reach locations
EN: 61010-1,
EN: 61010-02-031
Dynamic range of 2000 counts full scale
Auto power off
Specifications
Range
Resolution
Basic Accuracy
200mA
0.1mA
± (2.5% + 8d)
2A
1mA
± (2.5% + 8d)
200A
0.1A
± (2.5% + 8d)
Size(HxWxD): 182mm x 61mm x 34mm
Weight: 225g
Accessories:
Gift box with carrying case, 9V battery
www.ponpe.com
74
2007
contact:
[email protected]
CP-07/08
CEM
Clamp-on Adaptors
www.cem-meter.com.cn
CP-07/CP-08 High Resolution AC/DC Clamp-on Adaptors.
Provide non-invasive Current measurements to 40A with resolution to 10mA for
DC/AC Current. The adaptors are perfect for low current automotive, industrial control
or appliance repair.
Specifications
Function
Current
AC/DC
Range
Output
Sensitivity
Basic Accuracy CP-07
40A
10mV/A
0.1A/mV DC
±(3.0%+0.06A)
*
200A
1mV/A
1A/mV DC
±(3.5%+0.03A)
*
0.1mV/A
10A/mV DC
±(3.0%+0.03A)
600A
Size(HxWxD):
Weight:
CP-08
*
*
CP-07: 181mm x 43mm x 30mm
CP-08: 209mm x 43mm x 30mm
CP-07: 225g
CP-08: 285g
CP-07
CP-08
Accessories:
Test leads, gift box with carrying case and 9V battery.
www.ponpe.com
2007
75
contact:
[email protected]
CP-09/10/11
CEM
AC, AC/DC Clamp-on Adaptors
www.cem-meter.com.cn
CP-09
Smaller sized , convenient-to-use AC current
clamp-on Adaptor
CP-09 is the ideal tool to extend the current ranges for all Multimeters.
The CP-09 is a 200A AC current clamp-on Adaptor with voltage output via a
standard banana inputs to be connected to multimeters.
Specifications
Function
Range
Output
Sensitivity
Basic Accuracy
Current AC
200A
1mV/A
1A/mV AC
±2%
Size(HxWxD): 80mm x 66mm x 31mm
Weight: 80g
Accessories:
Test leads and clamshell
EN
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
CP-10/11
High Resolution Mini AC/DC Clamp-on Adaptors
The CP-10/11 are compatible with any Test Tool, Power Harmonics Analyzer, Oscilloscope,
Multimeter, or other voltage measurement device.
Specifications
Function
Current
AC/DC
Basic Accuracy
CP-10
2A
Range Output
100mV/A 0.01A/mV AC/DC
Sensitivity
±3.5%
*
80A
10mV/A
±3.5%
*
1A/mV AC/DC
CP-11
40A
10mV/A
0.1A/mV AC/DC
±3.5%
*
400A
1mV/A
1A/mV AC/DC
±3.5%
*
Size(HxWxD): 190mm x 70mm x 40mm
Weight: 200g
Accessories:
Test leads, gift box with carrying case and 9V battery.
www.ponpe.com
CP-10
76
CP-11
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
AC Voltage Detector
Non-Contact detection of AC Voltage
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
www.ponpe.com
2007
77
contact:
[email protected]
AC-9/AC-9B/AC-9C
CEM
Non-Contact AC Voltage Detectors
www.cem-meter.com.cn
EN
61010-1
CATIII
Easy-to-use just touch the tip to an outlet or cord. When it
1000V
glows red, you know there’s voltage in the line.
Fit in shirt pocket for convenience
EMC & LVD
EN: 50081-1, 50082-1
All outer surfaces are non-conductive for safety
Detects voltage without metallic contact
EN: 61010-1, EN: 61010-02-031
Self-test button (AC-9C)
Red LED light and audible beeper indicator (AC-9B)
Motor Shaking and LED light (AC-9C)
Bright Flashlight
CATIII 1000V
Features
Non-Contact Detection of AC Voltage from 200VAC to 1000VAC
100VAC to 1000VAC (European standard)
Rugged, double molded case
Suitable for outlets or against wire insulation testing
Flashing red LED light indicator
Built-in bright flashlight with ON/OFF button
Convenient size with pocket clip
For use on 50/60Hz circuits
Red LED light and audible beeper indicator(AC-9B)
Motor Shaking and LED light (AC-9C)
Specifications
Standard
CAT III 1000V
Operating Range
VoltFinder: 200 ~ 1000V AC;
Operating Temp.
-10°C ~ 50°C
100 ~ 1000V AC (European standard)
0°C ~ 30°C; 95%
Humidity
30°C ~ 40°C; 75%
40°C ~ 50°C; 45%
Size(HxWxD): 176mm x 26mm
Weight: 48g
Accessories:
Two “AAA” batteries, and clamshell
www.ponpe.com
54
78
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Electrical Testers
Features
Double molded
AC/DC Voltage detection
Single-pole phase test
Rotary field indication
IP64
CATIV 600V, CATIII 1000V
www.ponpe.com
2007
79
contact:
[email protected]
DT-9020/9021/9030/9121
CEM
Electrical Testers
www.cem-meter.com.cn
Double molded plastic housing
CAT III 1000V
Features
9020
9021
*
*
clear indication
1999 counts LCD display with analog bargraph
9030
9121
*
Bright Flashlight
*
AC/DC Voltage detection
*
*
*
*
Polarity detection
*
*
*
*
Single-pole phase test
*
Continuity test
*
*
*
*
Rotary field indication
*
*
*
Low impedance test
*
*
*
Flashlight
*
*
*
*
Voltage function operates without battery
*
IP64
*
*
*
*
Overvoltage class CATIII 1000V/CATIV 600V
*
*
*
*
VAT self-test button
*
EN
61010-1
CATIII
1000V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Double molded plastic housing
CAT III 1000V
Bright Flashlight
VAT self-test button
Specifications
9020
9021
9030
9121
Voltage range (AC/DC) 12, 24, 36, 50, 120, 2 12, 24, 36, 50, 120, 2 12, 24, 36, 50, 120 12, 24, 36, 50, 120, 2
30, 400, 690V
30, 400, 690V
230, 400,690V
-30% to 0% of reading -30% to 0% of reading ±1.5%±3D
Tolerance
30, 400, 690V
-30% to 0% of reading
ACV Frequency range 0......60Hz
0......60Hz
50/60Hz
0......60Hz
Internal impedance
<200kΩ
≤1MΩ
<200kΩ
<200kΩ
Size(HxWxD): 240mm x 78mm x 40mm
Weight: 237g
Accessories:
Two “AAA” batteries.(9021/9030/9121), gift box with carrying case
www.ponpe.com
80
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Insulation Tester
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
www.ponpe.com
2007
81
contact:
[email protected]
DT-5500
CEM
Insulation Tester
www.cem-meter.com.cn
Double molded plastic housing
CAT III 1000V
When doing power installation, 5500 can provide some special helps.
When doing insulation test, it can provide 250V, 500V and 1000V source
for the test and under each range it can supply more 1mA current to feet
the capacitance load. With the autorange function, it can measure up to
2000 MegaOhm with the resolution of 1Kohm. These characteristics are
also specified in the safety regulations in CE document.
EN
61010-1
CATIII
1000V
1mA test current for MegOhm range at rated voltage
EMC & LVD
200mA short current for continuity range
1.5V AA size Battery x 6
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Features
Meets IEC10101, CATIII 1000V
Large dual display with backlight
Test hold function for easy operation
Easy to carry testing package
Over range Indication
Low Battery Indication
Includes 6 AA batteries, test leads and plastic carrying case
Specifications
Range
Max Resolution
Accuracy
Voltage AC
750V
1V
±1.2%rdg ±10dgts
Voltage DC
1000V
1V
±0.8%rdg ±3dgts
Resistance
200Ω, 2000Ω
0.1Ω, 1Ω
±1%rdg ±2dgts
100kΩ~1MΩ
±3.5%rdg ±5dgts
Insulation Resistance
200MΩ, 2000MΩ
Test Voltage
250V-200MΩ/500V-200MΩ/1000V-2000MΩ
Continuity Test
Active Sound Level: ≤40Ω, Test current ≤200mA
Operating Temp
0ºC~40ºC(<80%R.H.)
Storage Temp
-10ºC~60ºC(<70%R.H.)
Power Source
1.5V AA size Battery x 6
Size(HxWxD): 200mm x 92mm x 50mm
Weight: 700g( with battery )
Accessories:
Test leads and “AA” Battery x 6.
www.ponpe.com
82
2007
contact:
[email protected]
DT-5300
CEM
Earth Ground Resistance Tester
www.cem-meter.com.cn
Electronic Digital Earth Resistance Tester is direct replacement of the conventional hand generator type tester. It is designed for measurement of the resistance of earthing used in the electrical equipment as well as for measurement of ground resistivity. It can be used for measurements of the other low
regular and liquid resistances. It can also be used for measurement of voltage AC, voltage DC and
resistance.
Double molded plastic housing
CAT III 1000V
This instrument finds wide application for testing earthing installation in power based industries,
telecommunication networks and electrical traction systems etc.
EN
Features
61010-1
CATIII
Meets IEC10101, CATIII 1000V
1000V
Large dual display with backlight
Test hold function for easy operation
EMC & LVD
Zero Automatic adjustment
EN: 50081-1, 50082-1
EN: 61010-1,
Sampling Rate: 2.5 times per second
EN: 61010-02-031
Easy to carry testing package
Over range Indication
Low Battery Indication
Includes 6 AA batteries, test leads and plastic carrying case
Specifications
Earth resistance
Range
Max Resolution
Accuracy
10Ω
0.01Ω
±2%rdg ±0.1Ω
100Ω
0.1Ω
±2%rdg ±3dgts
1000Ω
1Ω
±2%rdg ±3dgts
Voltage AC
750V
1V
±1.2%rdg ±10dgts
Voltage DC
1000V
1V
±0.8%rdg ±3dgts
Resistance
200kΩ
0.1kΩ
±1.0%rdg ±2dgts
Continuity Test
Active Sound Level: ≤40Ω, Test current ≤200mA
Operating Temp
0ºC~40ºC(<80%R.H.)
Storage Temp
-10ºC~60ºC(<70%R.H.)
Power Source
1.5V AA battery x 6
Size(HxWxD): 200mm x 92mm x 50mm
Weight: 700g( with battery )
Accessories:
Test leads and “AA” Battery x 6 Rubber
holster, 4-wire cable and iron rod x 2.
DT-5301 LOOP/PSC Tester
Custom microprocessor controlled for highest accuracy and reliability
3 LEDs for checking correct wiring status
15mA LOOP measurement: LOOP impedance 2000Ω range measurement is carried out with low test current(15mA)
Direct reading of Prospective Short Circuit Current(PSC)
EN
Safe voltage measurement function
Large custom digital display readout on all models
61010-1
CATIII
1000V
Measure low loop resistance(resolution of 0.01Ω)
Automatic lock-out if test resister overheats
Visual indication of reversed phase and neutral wiring at socket
EMC & LVD
EN: 50081-1, 50082-1
Specifications
EN: 61010-1,
EN: 61010-02-031
Max Resolution
Accuracy
Loop Impedance
20/200/2000Ω
±2.5% rdg ±4dgts
AC Test Current
20Ω 25A; 200Ω 2.3A;2000Ω 15mA
±1.2%rdg ±10dgts
AC Test Period
20Ω 20ms; 200Ω 40ms;2000Ω 280ms
±1.2%rdg ±10dgts
PSC
200A (2.3A 40ms); 2000A(25A 20ms);
Consider accuracy impedance
Double molded plastic housing
CAT III 1000V
20KA (25A 20ms)
Size(HxWxD): 200mm x 92mm x 50mm
Weight: 700g( with battery )
110V ~ 260V
±2%rdg ±4dgts
Resistance
0.1kΩ
±1.0%rdg ±2dgts
Operating Voltage
230V + 10% - 15% (195V ~ 253V) 50Hz
Accessories:
Safety Standard
IEC61010-1 CATIII 300V
Test leads and “AA” Battery x 6, gift box with carrying case.
Voltage
www.ponpe.com 2007
83
contact:
[email protected]
DT-5302
CEM
DMM with 4-wire small resistance measurement function
www.cem-meter.com.cn
Double molded plastic housing
4-wire resistance measurement up to 0.1mΩ resolution
4000 counts 33/4 digital LCD display with low battery indication
CAT III 1000V
Over load protection on all ranges
EN
Features
61010-1
CATIII
High accuracy, high resoltion portable Milliohm Meter or field use
1000V
Digital display 4000 counts
EMC & LVD
Safety design
Relative zero
EN: 50081-1, 50082-1
EN: 61010-1,
Data Hold
EN: 61010-02-031
MAX/MIN recording mode
Auto Power Off
Peak capture mode
Wide 40mF capacitance range
Diode Check & Continuity Test
Specifications
Function
Max. Range
Basic Accuracy
Resistance
200mΩ, 2Ω, 20Ω
±1.5%
Voltage DC
1000 V
±0.5%
Voltage AC
1000V
±0.8%
Current DC
10A
±1.2%
Current AC
10A
±1.8%
Resistance
40MΩ
±0.8%
Frequency
10MHz
±1.5%
Capacitance
40mF
±3.0%
Size(HxWxD): 200mm x 92mm x 50mm
Weight: 700g ( with battery )
Accessories:
Rubber holster, 4-wire cable and 9V
battery, gift box with carrying case.
DT-5400 Digital RCD Tester
Custom microprocessor controlled for highest accuracy and reliability
3 LEDs for checking correct wiring status
0 and 180 degree phase angle switch permits quick tests and consistent readings
Digital read-out of tripping time
Double molded plastic housing
CAT III 600V
Test DC sensitive breakers
Constant current source circuitry ensures that a fluctuating mains voltage
does not affect the accuracy of readings
Large custom digital display readout
Visual indication of reversed phase and neutral wiring at socket
Specifications
EN
61010-1
Rated Tripping Current
10/20/30/200/300/500mA
Fault Condition
Settingsx 1/2 x 1, x 5, x DC,
Settings
AUTO RAMP
EMC & LVD
Trip Current Duration
1000ms, 200ms(x5)
Lowest Resolution
1ms
EN: 50081-1, 50082-1
EN: 61010-1,
Trip Time Accuracy
±0.6%rdg ±4dgt
Operating Voltage
CATIII
600V
EN: 61010-02-031
230V+10%-15%
(195V~253V) 50Hz
Safety Standard
IEC61557-1, -6
IEC61010-1 CAT.III 600V
Withstand Voltage
www.ponpe.com
Size(HxWxD): 200mm x 92mm x 50mm
Weight: 700g ( with battery )
IEC61010-2-031 Pollution Degree 2
Accessories:
3700V AC for 1 minute
Test leads and “AA” Battery x 6, gift box with carrying case.
84
2007
contact:
[email protected]
DT-901/902/903
CEM
Phase Rotation indicator/Socket Polarity and earth leakage tester
www.cem-meter.com.cn
DT-901 Phase Rotation indicator
EN
61010-1
The phase Rotation indicator is a handheld instrument designed to detect the
rotary field of three-phase systems.
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
3 Phase indication
Indication of phase rotation
EN: 61010-1,
EN: 61010-02-031
Clear LCD display
No battery required
Features
Nominal voltage
40V to 690V AC
Frequency range
15 to 400Hz
Current pickup
1mA
Nominal test current(per phase)
1mA
Power supply
From unit under test
Electrical safety
IEC61010/EN61010; IEC61557-7/EN61557-7
Protection level
CATIII 600V
Type of protection
IP40
Operating temperature
0ºC to +40ºC
DT-902 Motor and Phase Rotation indicator
The Motor and Phase Rotation indicator is a handheld, battery-operated Instrument designed to detect the rotary field of three-phase system and determine
EN
61010-1
motor-rotation direction.
CATIII
600V
Determine rotary field direction
Non-contact rotary field indication
EMC & LVD
EN: 50081-1, 50082-1
Determine the motor connection
Magnetic field detection
EN: 61010-1,
EN: 61010-02-031
Features
Nominal voltage rotary direction
1V to 400V AC
Nominal Voltage phase indirection 120V to 400V AC
Frequency range
2 to 400Hz
Test Current (per phase)
< 3.5 mA
Electrical safety
DIN, VDE 0411, IEC61010 DIN;IEC61557-7/EN61557-7
Protection level
CATIII 600V
Type of protection
IP40
Operating Altitude
2000m
Operating temperature
0ºC to +40ºC
EN
DT-903 Socket Polarity and earth
leakage tester
61010-1
CATIII
600V
EMC & LVD
DT-903 Socket Polarity and earth leakage tester tests 3 wire 220V AC outlets
and earth leakage circuit breakers(ELCB).
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Specifications
Power supply
From unit under test
Electrical safety
IEC61010/EN61010; IEC61557-7/EN61557-7
Protection level
CATIII 600V
Type of protection
IP40
Operating temperature
0ºC to +40ºC
Size(HxWxD): 130mm x 69mm x 32mm
Weight: 130g
www.ponpe.com
2007
85
contact:
[email protected]
DT-904
CEM
Digital RCD Tester
www.cem-meter.com.cn
DT-904 Digital RCD tester
2000ms readout for testing latest delay action breakers.
Fully programmed operation
EN
61010-1
Accurate digital read out of tipping time
Two neon lamps give quick check for correct wiring
CATIII
600V
Operates from mains supply. No need for batteries
Compact, light weight and simple to operate
EMC & LVD
EN: 50081-1, 50082-1
Zero cross circuitry permits testing at 0°and 180°portion of
sine wave at these two tests minimum(best) and Maximum
EN: 61010-1,
EN: 61010-02-031
(worst) trip times will be displayed
Data hold function to freeze the digital trip time display allows for easy readout and eliminates the possibility of reading
error
Specifications
Max Resolution
Trip current settings
5mA, 10mA, 30mA, 100mA, 300mA, 500mA
Accuracy
Test Current (No Trip Test)
50% of circuit breaker trip current selected
2000mS ± 5%
Test Current (Trip Test)
100% of circuit breaker trip current selected
2000mS ± 5%
Test Current (Fast Trip Test)
250mA regardless of circuit
40mS ± 5%
breaker trip current selected
Fault trip Time
2000mS (40mS for Fast Trip)
±2%rdg ±3dgts
Resistance
0.1kΩ
±1.0%rdg ±2dgts
Operating Voltage
220V, 230V, 240V AC ± 10%
± 3%
Size(HxWxD): 130mm x 69mm x 32mm
Weight: 130g
EN
61010-1
DT-905 Socket Polarity Tester
The new ergonomic, easy to use socket tester is designed to make the electricians job easier and is ideal for first level indication for testing standard mains
sockets.
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Clear LED indication of wiring status
Modern, ergonomic design
Compact and durable
Simple to use, just plug into socket for autotest
DT-906 Socket Polarity and Earth Leakage Tester
DT-906 is a professional range of socket tester with modern, ergonomic and durable design, to test
the safety of installed mains socket.
DT-906 also checks 30mA RCDs, a unique soft-touch button tests that an RCD in the circuit trips
within 300ms when a nominal 30mA earth fault current is applied; a further button, the earth volts
touchpad, detects raised earth voltages above 50V AC, thus indicating potentially dangerous
installations.
Three vivid bicolour LEDs and a buzzer on DT-906 provide a quick-to-check combination of signals which indicate correct wiring, missing earth, live/neutral reverse, earth/live reverse, missing
neutaral, live faults, and those errors detected by the two pushbutton tests.
Size(HxWxD): 69mm x 67mm x 32mm
Weight: 80g
www.ponpe.com
86
2007
contact:
[email protected]
DT-2001/6200/9901
CEM
Multifunction Electrical Testers
www.cem-meter.com.cn
Features
2001 with Open Jaw and two LCD displays, measures ACA
and ACV/DCV/Freq./%duty/OHM/CAP/Diode/Continuity at
same time.
Dual LCD display
*
Automatically turns power on and off
*
High input impedance
10MΩ
Low battery indication
*
Satety Conformance
Complies with EN 61010-1 for use in CATIII
600V environments
Specifications
Function
Range
Basic Accuracy
Voltage AC
600V
±(1.5%±2d)
Voltage DC
600V
±(3.0%±3d)
61010-1
Current AC
200A
±(3.0%±3d)
CATIII
Resistance
40MΩ
±(2.0%±3d)
EMC & LVD
EN: 50081-1, 50082-1
Capacitance
200uF
±(5.0%±5d)
Frequency
9,999MHz
±(2.0%±4d)
EN: 61010-1,
EN: 61010-02-031
Duty Cycle
0.1%~99.9%
±(1.2%±2d)
Diode Test
0.3mA typical
±(1.0%±5d)
Continuity Test
Provided
EN
600V
Size(HxWxD): 226mm x 50.5mm x 39.5mm
Weight: 238g
Wider measurements range from 0.1nF to 40mF
4000 counts digital LCD display
6200 Mini Digital Capacitance Meter
Easy to use with pocket size and light weight
Auto ranging and Manual ranging
Data Hold and Relative function
Auto Power Off
Specifications
Capacitancc
Range
Resolution
Basic Accuracy
Auto-ranging
4nF ~ 200uF
0.001nF
±5.0%±5d
Manual-ranging
0.01mF ~ 40mF
0.01mF
±5.0%±15d
Size(HxWxD): 188mm x 64.5mm x 24.5mm
Weight: 160g
Accessories:
A23 (12V) battery and Manual
9901 Multi-Purpose Tester
Multi-purpose test for Battery, Bulb, Fuse and Continuity
Audible continuity tester via test probes supplied
Readings show up on clear scale
EN
61010-1
Automatically turns power on and off
CATII
600V
Size(HxWxD): 145mm x 67mm x 34mm
Weight: 143g
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Accessories:
9V battery and Test leads
www.ponpe.com
EMC & LVD
2007
87
contact:
[email protected]
DT-9902/9903
CEM
Electrical Testers
www.cem-meter.com.cn
9902 & 9903 Electrical testers provide voltage, continuity with one compact
tool. They will turn on automatically when you place the probe across a complete
circuit. So you don’t even have to turn them on or off.
Satety Conformance
Complies with EN 61010-1 for use in CATIII
600V environments
EN
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Features
Automatically selects VAC, VDC or Continuity test
9902
9903
*
*
1999 counts LCD display
9902N/9903N with
Non-Contact AC Voltage Detection
*
Automatically turns power on and off
*
*
High input impedance
1MΩ
400kΩ
Non-Contact Voltage Detection
9902N
9903N
Low battery indication
*
Specifications
Function
9902
9903
Accuracy
Voltage AC
690V
600V
±(3.0%±3d)
Voltage DC
220V
600V
±(1.5%±2d)
Continuity Test
*
*
Size(HxWxD): 9902/9902N : 135mm x 51.5mm x 38.5mm
9903/9903N : 215mm x 72mm x 36.7mm
Weight:
9902/9902N :182g
9903/9903N : 235g
www.ponpe.com
Accessories:
Test leads and 2pcs AA batteries.
88
2007
contact:
[email protected]
LA-1011
CEM
2 in 1 LAN Tester & Multimeter
www.cem-meter.com.cn
The tester is a newly designed and very practical tester that can easily read the
correct pin configuration of 10 Base -T cable(Category 5), 10 Base-2 cable (coax),
RJ45/RJ11 moduler cables, 356A, TIA-568A/568B and Token Ring cable by
comparing one transmitting end to the corresponding receiving end. With the
remote kit is can test cables installed far away either on wall plate or patch panel.
It is easy to verify the cable continuity, open, short and cross-connect. It is
affordable, so you can benefit the most.
Test the correct pin configuration of 10 Base-T 10 Base-2 Thin Ethernet cable,
RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable
etc.
With remote kit it can remotely test cables up to 300 m away either on the
wall plate or patch panel.
Test the ground wire
Measures DC/AC Voltage, DC/AC Current, Resistance, Continuity & diode
Specifications
Function
Max Range
Basic Accuracy
Voltage DC
600V
±0.5%
Voltage AC
600V
±1.2%
Current DC
200mA
±1.5%
Current AC
200mA
±2.0%
Resistance
20MΩ
±0.8%
Continuity Test
Beep if less than 100Ω
EN
61010-1
CATIII
600V
Size(HxWxD): 162mm x 74.5mm x 44mm
Weight: 308g
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Accessories:
9V battery and Two “AAA” batteries, remote terminator, holster,
cables, test leads, gift box with carrying case.
www.ponpe.com
2007
89
contact:
[email protected]
LA-1012
CEM
Cable Locator
www.cem-meter.com.cn
For all applications (live or dead cables) without additional instruments
Set includes a transmitter and a receiver
Proven digitally coded sender signal guarantees clear signal identification
Transmitter with LC-display for transmitting level, transmitting code and external voltage
Receiver with a backlight LC-display for level of receiving signal, code of receiving signal and
live voltage indication
Automatic or manual adjustment of receiving signal sensitivity
Acoustical receiving signal switchable
Auto-Power-Off
Additional torch lamp function for working in dark environments
Electrical Testers
Additional transmitters are available for extension of to distinguish between several signals
EN
61010-1
CATIII
600V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Specifications
Technical Specifications
Voltage measurement range
Transmitter: 12 V, 50 V, 120 V, 230 V, 400 V
Frequency range
Transmitter: 0...60 Hz
Output signal
Transmitter: 125 kHz
Voltage
Transmitter: Up to 400 V AC/DC
Tracing depth cable location
Receiver: 0...2.5 m wall/underground cables
Main voltage detection
Receiver: 0...0.4 m
Environmental Specifications
Operating Temperature
Transmitter: 0 to 40ºC; Receiver: 0 to 40ºC
Storage Temperature
Transmitter: -20ºC to +60ºC ; Receiver: -20ºC to +60ºC
Humidity (Without Condensation)
Transmitter: Max. 80% relative; Receiver: Max. 80% relative
Operating Altitude
Transmitter: Up to 2000 m; Receiver: Up to 2000 m
Safety Specifications
Electrical Safety
EN 61010-1
Overvoltage category
CAT. III 300 V
Size(HxWxD): 192mm x 61mm x 37mm
Weight: 180g
Accessories:
9V battery and Two “AAA” batteries.
www.ponpe.com
90
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
3 in 1 Stud/Metal/AC Voltage finder
www.ponpe.com
2007
91
contact:
[email protected]
LA-1010
CEM
3 in 1 Stud/Metal/AC Voltage finder
www.cem-meter.com.cn
Features and Benefits
Laser leveling, layout and stud locating on vertical and horizontal surfaces
3 in 1 Stud/Metal/AC
wood, metal and live wire detection-detects wood up to 3/4˝ depth
Voltage finder
180 degree pivoting laser plane with level and plumb vials
20’ laser line projection onto work surface with 90 degree squaring
Two self contained hang pins to mount unit to work surface (vertical or horizontal)
LCD sensing and mode display with new target graphics
Laser line level
LED display with continuous live wire detection
Thumb dial adjustable feet for leveling the laser
Easy keypad operation
Ergonomically designed for comfort and grip
Requires a 9 Volt battery
EMC
EN: 50081-1, 50082-1
Size(HxWxD): 180mm x 67mm x 38mm
Weight: 180g
Measures in imperial/metric
DM-01 Ultrasonic Distance Meter
Start point selection
Data store/recall
DM-01 Ultrasonic Distance Meter with Laser Traget Pointer. The device has 5
Conputes areas and volumes
5 groups of value in memory
EMC
EN: 50081-1, 50082-1
memory units. Those data will be still stored even if power off, but one of memory data
will lose if it is deleted.
Sum of lengths
Auto/manual shut-off
LCD backlight
Beeps for wrong reading finding and reading confirmation
Laser pointer
Specifications
Measuring range
0.4m ~ 16 inch (20 inch ~ 52 feet)
Accuracy
+/-0.4 within 6m (20 feet) and +/-0.8 above 6m
Conditions
0 ~ 40ºC, 45% ~ 90%RH
Power supply
9V battery
Current consumption
Stand-by current:<=2 Ua; Operating current:20~50mA
Auto shut-off
120 seconds
Size(HxWxD): 154mm x 61mm x 46mm
Weight: 190g
Accessories:
9V battery, gift box with carrying case.
www.ponpe.com
92
2007
contact:
[email protected]
CEM
E n v i r o n m e n t
DT-8891/8891A
S e l e c t i o n
G u i d e
DT-123/125/127/129
P95
P107
Professional Thermocouple
Thermometers
P121
Light Meters
DT-8851/8852
P97
CO-110
P109
P123
Sound Level Meter
DT-321/321S
Gas Detectors
DT-8894
P101
DT-171/172
P113
Humidity & Temperature Meters
DT-616CT
P129
Thermo-Anemometer with IR
temperature
DT-8890/8890A
P106
Humidity & Temperature Meter
www.ponpe.com
DT-1300/1301/1308
Moisture meters
DT-610B/DT-612/DT-613
Thermocouple Thermometers
www.cem-meter.com.cn
Temperature and Humidity Datalogger
DT-8820
P119
Manometer
94
P132
4 in 1 Multifunction Environment Meter
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional Thermocouple Thermometers
www.ponpe.com
2007
95
contact:
[email protected]
DT-8891/8891A
CEM
Professional Thermocouple Thermometers
www.cem-meter.com.cn
IR
8891/8891A series type K dual input thermometers with IR therType K (T1)
Type K Dual input (8891A)
mometer offer fast response and laboratory accuracy. These thermometers work with K-type thermocouples and offer 0.1ºC/0.1ºF resolution
Type K (T2)
IR (T3)
over the entire measurement ranges. A rugged holster protects both
models.
Type K Dual input with IR Thermometer (8891)
Backlight
Type K dual input direct thermometer with infrared thermometer or differential measurements to 0.1º
Accuracy to 0.15% ºC or ºF readout
Display [T1andT2] or [T1-T2 and T1] or [T1-T2 and T2] (8891A)
Display [T1, T2, T3] or [T1-T2] or [T1-T3 ] or [T2-T3 ] (8891)
Display Maximum reading plus Data Hold on large LCD display with backlight
Measures differential Temperature between the two probes and infrared thermometer
Features
8891
8891A
User Selectable ºC or ºF
*
*
User Selectable 0.1ºC or 1ºC(0.1ºF or 1ºF) Resolution
*
*
Type K Thermocouples
*
*
Type K Dual input with IR Thermometer
*
Dual Thermocouple Input
*
Wide variety of interchangeable Thermocouple Probes
*
*
Max/Min/AVG Hold and Data Hold
*
*
Differential Temperature
*
*
SCAN Function (T1, T2, T3, MAX, HOLD......)
*
*
LCD display with backlight
*
*
*
Specifications
Range: -200ºC to 1372ºC (-328ºF to 2501ºF)
Basic Accuracy
T1, T2 Above -100ºC (-148ºF)
±[0.15%rgd+1ºC(1.8ºF)]
T1, T2 Blow -100ºC (-148ºF)
±[0.5%rgd+2ºC(3.6ºF)]
T1-T2
±[0.5%rgd+1ºC(1.8ºF)]
Type K Temperature Resolution
0.1ºC/ºF/K<1000º ;1ºC/ºF/K>1000º
T3 (IR temperature)
±[2.0%rgd+2ºC(3.6ºF)]
T1-T3
±[2.0%rgd+3ºC(5.4ºF)]
T2-T3
±[2.0%rgd+3ºC(5.4ºF)]
IR Temperature: -30ºC ~ 550ºC;
±(2.0%±2ºC)
-22ºF ~ 1022ºF
±(2.0%±4ºF)
IR Temperature Resolution
Single or Dual
Thermocouple Input
Infrared Input
0.1º
Size(HxWxD): 201mm x 75mm x 50mm
Weight: 280g
EMC
EN: 50081-1, 50082-1
Accessories :
9V battery and type K temperature probe, IR temperature probe.
www.ponpe.com
Thermistor clamp
temperature probe
96
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Thermocouple Thermometers
www.ponpe.com
2007
97
contact:
[email protected]
DT-610B/DT-612/DT-613
CEM
Thermocouple Thermometers
www.cem-meter.com.cn
The 610B (single input) and 612(dual input) contact thermometers offer fast response and laboratory accuracy. The DT-613 (dual
input) are microprocessor-based, digital thermometer designed to use
external type K thermocouples (temperature probes) as temperature
sensors. These thermometers work with type K thermocouples and of-
High Accuracy to 0.15% (613)
Type K (T1)
Type K (T2)
Backlight
fer 0.1ºC/0.1ºF resolution over the entire measurement range. A rugged
holster protects three models.
Type K thermometer with single or dual input direct or differential measure-
Dual Temperature input (612/613)
ments to 0.1º
Accuracy to 0.15% ºC or ºF readout (613)
Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy
Readout in ºC, ºF ,or Kelvin(K)
Auto Power Off (Sleep mode) prolongsv battery life
Large, easy-to-read LCD
display with backlit
Single or Dual Thermocouple Input
EMC
EN: 50081-1, 50082-1
Features
610B
612
613
User Selectable ºC or ºF
*
*
*
User Selectable 0.1ºC or 1ºC(0.1ºF or 1ºF) Resolution
*
*
*
Type K Thermocouples
*
*
*
Single Thermocouple Input
*
*
*
Dual Thermocouple Input
Wide variety of interchangeable Thermocouple Probes
*
*
Max Hold and Data Hold
*
*
*
Differential Temperature (T1-T2)
*
*
SCAN Function (T1, T2, T1-T2, MAX, HOLD......)
*
*
*
*
LCD display with backlight
*
Specifications
Function
Range
Basic Accuracy
Temperature
-50~1300ºC
±(0.5%±1ºC)
-58~2000ºF
±(0.5%±2ºF)
Resolution
0.1o or 1o
610B
612
613
Single Input
Dual Input
Dual Input
*
*
Specifications (613)
Range: -200ºC to 1372ºC (-328ºF to 2501ºF)
Basic Accuracy
T1, T2 Above -100ºC (-148ºF)
±[0.15%rgd+1ºC(1.8ºF)]
T1, T2 Blow -100ºC (-148ºF)
±[0.5%rgd+2ºC(3.6ºF)]
T1-T2
±[0.5%rgd+1ºC(1.8ºF)]
Type K Temperature Resolution
0.1ºC/ºF/K<1000º ;1ºC/ºF/K>1000º
Size(HxWxD): 165mm x 76mm x 43mm
Weight: 403g
www.ponpe.com
Accessories :
9V battery, Holster with stand and Temperature probe.
98
2007
contact:
[email protected]
DT-9610B/9612/1306
CEM
Thermocouple Thermometers
www.cem-meter.com.cn
Type K thermometers with single or dual input direct or differential measurements to 0.1o. The
9610 (single input) and 9612 (dual input) contact thermometers offer basic functionality at a great price.
These thermometers work with type K thermocouples and offer 0.1ºC/0.1ºF resolution over the entire
measurement ranges. Both models are protected by a rugged holster.
Type K thermometers with single or dual input direct or differential measurements to 0.1o
Single or Dual Thermocouple Input
Accuracy to 0.5%ºC or ºF readout
Front panel offset adjustment to optimize accuracy
(T1-T2) mode freezes display for convenient viewing(9612)
Display Maximum reading plus Data Hold on large LCD display
Features
9610B
9612
User Selectable ºC or ºF
*
*
User Selectable 0.1ºC or 1ºC(0.1ºF or 1ºF) Resolution
*
*
K-type Thermocouples
*
*
Single Thermocouple Input
*
Dual Thermocouple Input
EMC
EN: 50081-1, 50082-1
Accessories :
9V battery, Holster with stand and Temperature probe.
*
Wide variety of interchangeable Thermocouple Probes
*
*
Max Hold and Data Hold
*
*
Differential Temperature (T1-T2)
*
SCAN Function (T1, T2, T1-T2, MAX, HOLD......)
*
Specifications
Function
Range
Basic Accuracy
Temperature
-50~1300ºC
±(0.5%±1ºC)
-58~2000ºF
±(0.5%±2ºF)
Resolution
0.1o or 1o
9610B
9612
Single Input
Dual Input
Size(HxWxD): 165mm x 76mm x 43mm
Weight: 403g
1306 Mini Digital Thermometer
Wider measurements range from -20ºC to 1000ºC or -4ºF to 1832ºF
ºC/ºF switchable
Easy to use with pocket size and light weight
2000 counts digital LCD display with ºC, ºF, HOLD, LOW BAT indication.
Data Hold & Auto Power Off
Includes two LR44 button batteries.
Specifications
Function
Range
Resolution
Accuracy
Temperature
-20ºC ~ +1000ºC
1ºC
±3%±3d
-4ºF ~ +1832ºF
1ºF
Sensor: K-Type Thermocouple
Size(HxWxD): 188mm x 64.5mm x 24.5mm
Weight: 160g
Accessories :
Temperature probe, gift box with carrying case.
www.ponpe.com
2007
99
contact:
[email protected]
DT-130/131
CEM
Pen type Thermometers
www.cem-meter.com.cn
The 130/131 contact thermometers offer fast response and laboratory accuracy. These thermometers offer 0.1ºC/0.1ºF resolution over
the entire measurement ranges. A rugged holster protects both models.
High Accuracy
Easy to use: Remove the protective sheath, press the ON/OFF button and insert
into the testing area.
LCD screen shows readings in Fahrenheit or Celsius
Range: -40° to +250° C/ -40° to +482° F
Features
User Selectable ºC or ºF
130
131
*
*
User Selectable 0.1ºC or 1ºC(0.1ºF or 1ºF) Resolution
*
*
Sampling time 2.0 seconds
*
*
LCD display
*
*
Max / Min Hold and Data Hold
*
Auto Power Off
*
*
Specifications
Function
Range
Basic Accuracy
Temperature
-40ºC~250ºC/
±1.5%±2ºC/±3.8ºF
-40ºF~482ºF
±(1.5%±2ºF)
Resolution
0.1ºC/ºF
EMC
Size(HxWxD): 130:150mm x 40mm x 28mm
131:211mm x 32mm x 19mm
Weight:
130:19g
131:35g
EN: 50081-1, 50082-1
Accessories :
One LR44(1.5V) button battery, packing: clamshell.
www.ponpe.com
100
2007
contact:
[email protected]
DT-8892
CEM
Professional Hygro-Thermometer Psychrometer with GPP
www.cem-meter.com.cn
%RH, Temperature, Dew point, Wet bulb,
absolute Humidity, Mixing ration
Mixing ration/
Temperature
Highest 2% RH accuracy with fast response time
Dual backlit display
Large LCD display of: Humidity/Temperature; Humidity/
Dew Point; Humidity/Wet Bulb; GPP/GPK
Temperature
0~100% RH
Fast Response time when taking a measurement
Data Hold and Min/Max functions
Backlight
Auto power off and low battery indication
High Quality Sensor
WBT
DP
ºC/ºF
EMC
EN: 50081-1, 50082-1
Specifications
Features
Function
Range
Basic Accuracy(%rdg+digits)
Fast Response Time
Humidity
0ºC~10%RH, 90ºC~100%RH
±3%RH
High Accuracy
10ºC~90%RH
±2%RH
High Performance
-30ºC~100ºC/-22~199ºF
±0.5ºC/0.9ºF
Max Hold and Data Hold Function
-20ºC~60ºC/-4~140ºF
±2ºC/4ºF
Dual Display & Backlight
Dew point Temp -30ºC~100ºC/-22~199ºF
±0.5ºC/0.9ºF
Dew point & Wet Bulb Temperature
Wet Bulb Temp
0ºC~80ºC/32~176ºF
±0.5ºC/0.9ºF
Mixing ratio
Mixing ratio
0~500GPK, 0~3500GPP
±3%GPK, ±3%GPP
Temperature
Size(HxWxD): 255mm x 45mm x 34mm
Weight: 200g
Accessories :
9V battery, gift box with carrying case
www.ponpe.com
2007
101
contact:
[email protected]
DT-8896
CEM
Psychrometer with lnfraRed Thermometer
www.cem-meter.com.cn
IR
IR TEMP.
Type K TEMP.
0~100% RH
DP
ºC/ºF
WBT
ºC/ºF
PC-Link
Backlight
PC interface
The Psychrometer with lnfraRed Thermometer has been
disigned to combine the functions of Humidity meter, Type K Thermometer and Infrared Thermometer.
3 in 1
%RH, Type K & IR Temperature
Features
Infrared to measure surface temperature
Triple digital LCD display
Slim design with rubberized sides for better grip and for one hand operation
Low battery indication
Fast response time when taking a measurement
Accurate reading
Auto Power off
Red laser indication
Dual Display & Backlight
Simultaneous display of: Humidity/Temperature; Humidity/Dew Point; Humidity/Wet Bulb
Specifications
Function
Range
Resolution Accuracy
Type K Temperature
-100~1372ºC(-148~2501ºF)
0.01ºF/ºC
InfraRed Temperature
-58 to -4ºF(-50 to -20ºC)
0.1ºF/ºC
±9.0ºF(5.0ºC)
-4 to 932ºF(-20 to 500°C)
0.1ºF/ºC
±2% reading or ±4ºF(2ºF)
±3% ±0.20m/s
Air Temperature
14-140ºF(-10-60ºC)
0.1ºF/ºC
±4.0ºF(2.0ºC)
Humidity
0%~99.9%RH
0.1%RH
±2%RH
Dew point Temp
-30ºC~100ºC/-22ºF~199ºF
0.1ºF/ºC
±0.5ºC/0.9ºF
Wet Bulb Temp
0ºC~80ºC/32ºF~176ºF
0.1ºF/ºC
±0.5ºC/0.9ºF
Size(HxWxD): 255mm x 75mm x 50mm
Weight: 350g
Accessories :
9V battery and type K temperature probe, gift box and carrying case.
www.ponpe.com
102
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Humidity & Temperature Meter
EMC
EN: 50081-1, 50082-1
www.ponpe.com
2007
103
contact:
[email protected]
DT-321/321S
CEM
Humidity & Temperature Meters
www.cem-meter.com.cn
Temperature
DP
0~100% RH
ºC/ºF
WBT
321 is compact probe size digital Hygro-Thermometer, ideal for field use with high performance.
321S is fast response, high accuracy with Dew point & wet bulb Temperature measurement.
Backlight
Fast Response
High Accuracy
EMC
EN: 50081-1, 50082-1
High Quality Sensor
Features
321
321S
Mini size
*
*
Fast Response Time
*
*
*
*
Max Hold and Data Hold Function
*
*
Dual Display & Backlight
*
*
High Accuracy
*
High Performance
Dew point & Wet Bulb Temperature
*
Specifications
Function
Range
Basic Accuracy
Humidity
0~100%RH
±2%RH
±3.5%RH
321
321S
*
*
-30~100ºC/ -22~199ºF
±0.5ºC/0.9ºF
-20~60ºC/ -4~140ºF
±2ºC/4ºF
Dew point Temp.
-30~100ºC/ -22~199ºF
±0.5ºC/0.9ºF
*
Wet Bulb Temp.
0~80ºC/ 32~176ºF
±0.5ºC/0.9ºF
*
Temperature
*
*
Size(HxWxD): 255mm x 45mm x 34mm
Weight: 200g
Accessories:
9V battery, gift box and carrying case.
www.ponpe.com
104
2007
contact:
[email protected]
DT-615/DT-625
CEM
Humidity & Temperature Meters
www.cem-meter.com.cn
Large LCD display
0~100% RH
Temperature
Backlight
625 is digital Humidity & Temperature Meter with Wet Bulb Temperature
& Dew Point temperature, which has been designed to combine the functions
of Humidity Meter, Temperature Meter, Wet Bulb Temperature and Dew point
temperature.
It is an ideal Humidity & Temperature Meter instrument with scores of
practical applications for laboratorial, industrial, Engineer and professional
use.
615 is Humidity meter plus Air and type K thermocouple thermometer.
Large, easy-to-read backlit LCD with dual display
Fast Response Time %RH: 10s (90% at 25ºC still air)
2% High Accuracy (625)
Dew Point Temperature (-30ºC~100ºC/-22ºF~199ºF) (625)
Wet Bulb Temperature ( 0ºC~80ºC/32ºF~176ºF) (625)
Resolution 0.1%RH, 0.1ºC/0.1ºF
Max/Min Hold and Data Hold Function (625)
Micro Processor-based Design (625)
Dual Display Temperature & Humidity
Features
615
Large dual digital LCD display with backlight
625
*
*
Response Time%RH:10s (90% at +25ºC still air)
*
Sampling Rate 2.5 samples per second
*
*
Dew Point Temperature & Wet Bulb Temperature
*
2% High Accuracy
*
Dual Display Temperature & Humidity
*
Type K temperature
*
*
High Performance and
quality sensor
Specifications
Function
Range
Resolution
Basic Accuracy
Humidity
0ºC~100%RH
0.1%RH
±2%RH
±3.5%RH
Temperature
-30ºC~100ºC/-30ºF~199ºF
0.1ºC/ºF
±0.5ºC/0.9ºF
Type K Temp.
-20ºC~1000ºC/ -4ºF~1832ºF
615
625
*
*
*
0.1º up to 200º, 1º over 200º
±3%
Dew Point Temp. -30ºC~100ºC/-22ºF~199ºF
0.1ºC/ºF
±1.0ºC/1.8ºF
*
Wet Bulb Temp.
0.1ºC/ºF
±1.0ºC/1.8ºF
*
0ºC~80ºC/32ºF~176ºF
*
Size(HxWxD): 225mm x 45mm x 34mm
Weight: 200g
Accessories:
Carrying case, type K temperature probe (615) and 9V battery.
www.ponpe.com
2007
105
contact:
[email protected]
DT-616CT/3321
CEM
Humidity & Temperature Meter
www.cem-meter.com.cn
616CT is a Humidity and temperature meter with built-in laser pointer for non-contact temperature measurement.
IR
3321 new humidity and temperature meter with built-in probes
includes wet bulb, dew point and mixing ratio measurements for
Non-contact Temperature
Measurement
quick assessment of air moisture content. 3321 is invaluable for
facility maintenance and utility technicians, HVAC-service
IR TEMP.
Temperature
0~100% RH
Backlight
contractors, and specialists who assess indoor air quality(IAQ).
EMC
Large, easy-to-read backlit LCD with dual display
EN: 50081-1, 50082-1
EN: 60825-1
Humidity, Air Temp. plus IR for non-contact Temp. measurements (616CT)
Highest 2% RH accuracy with fast response time (3321)
Simultaneous display of: Humidity/Temperature; Humidity/Dew Point; Humidity/Wet Bulb; GPP/GPK(3321)
Auto power off and low battery indication
Mixing ratio(3321)
Features
616CT
3321
Humidity, Air Temp. plus IR for non-contact Temp. measurements
*
8:1 Distance to Spot size & fixed 0.95 emissivity
*
Fast Response Time
*
High Accuracy & High Performance
*
*
Max Hold and Data Hold Function
*
*
Dual Display & Backlight
*
*
*
Dew point/Wet Bulb Temperature & Mixing Ratio
*
Specifications
Function
Range
Resolution
Basic Accuracy
Humidity
0ºC~100%RH
0.1%RH
±2%RH
616CT
3321
*
±3.5%RH
*
*
-30ºC~100ºC/-30ºF~199ºF
0.1ºC/ºF
±0.5ºC/0.9ºF
Dew Point Temp. -30ºC~100ºC/-22ºF~199ºF
0.1ºC/ºF
±1ºC/1.8ºF
*
Wet Bulb Temp.
0ºC~80ºC/32ºF~176ºF
0.1ºC/ºF
±1ºC/1.8ºF
*
Mixing ratio
0~500GPK, 0~3500GPP
0.1GPK/GPP
±3%GPK, ±3%GPP
IR Temperature
-50ºC~500ºC/ -58ºF~932ºF
0.1o up to 200o, 1o over 200o
±2.0%±2ºC/4ºF
Temperature
*
*
*
DT-3321 Dew Point/Wet Bulb/Psychrometer
Temperature
0~100 %RH
Backlight
High Accuracy
Fast Response
EMC
EN: 50081-1, 50082-1
High Performance and
quality sensor
Size(HxWxD): 22mm x 63mm x 28mm (3321)
Weight: 200g (3321)
Large, easy-to-read LCD
display with backlit
Size(HxWxD): 150mm x 72mm x 35mm (616CT)
Weight: 210g (616CT)
Accessories :
Humidity Probe( 616CT) and 9V battery, gift box and carrying case.
www.ponpe.com
Button on both sides of the
rugged housing, easy to use
106
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Moisture meters
www.ponpe.com
2007
107
contact:
[email protected]
DT-123/125/127/129
CEM
Moisture Meters
www.cem-meter.com.cn
%H2O
123/125/127 are used to measure the moisture level in sawn timber (also cardboard, paper) and hardened
materials (plaster, concrete and mortar). They display the moisture level. The instruments have an average adjustment for European wood based on a wood temperature of 20ºC.
127 is 2 in 1 digital and analog moisture meter
DT-129 is a conductivity moisture instrument designed for use in wood.
Built in Pins
Large LCD display
Automatically Temperature Corrected (ATC) Readings when used
with the temperature probe(129)
Readings with Moisture Probe or Hammer Electrode
Readings with Integral Clectrod Pins
Specifications
Measuring principle
Electrical resistance
Electrode length
8mm
Elektrodes
Integrated, replaceable
Measuring range
Wood: 6-44% (123/125/127); Wood: 6-99.9% (129)
Optional remote probe
Material: 0.2-2.0% (123/125/127)
Display Accuracy
Wood: ±1%
Material: ±0.05% (127)
Battery
3 x Cr 2032, replaceables; 2 x AAA (129)
Housing
Impact-proof plastic housing
Ambient temperature
0-40ºC
Ambient moisture
0-85%
Size(HxWxD): 123/127: 130mm x 40mm x 33mm
Weight: 99g
Size(HxWxD): 125: 140mm x 48mm x 33mm
Weight: 93g
Size(HxWxD): 129: 180mm x 50mm x 31mm
replaceable pin
Weight: 175g
2 in 1 digital and analog display
Calibration and battery check
EMC
EN: 50081-1, 50082-1
www.ponpe.com
108
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Sound Level Meters
www.ponpe.com
2007
109
contact:
[email protected]
DT-8851/8852
CEM
Sound Level Meters
www.cem-meter.com.cn
dB
DATA
PC-Link
POWER
PC interface
110V/220V AC
adaptor
30~130 dB
LOGGER
Backlight
8851/8852 Sound Level Meters are designed for noise project; quality control; illness prevention and cure and all kinds of environmental
sounds measurement. It is applied to the sounds measurement at factory;
1.4dB Accuracy
school; office; traffic access and household, etc.
Level range: 30~130dB
Features
This unit confirms to the IEC61672-1 class 2 for Sound Level Meters
MAX & MIN measurements
Over range display
Under range display
A & C Weighting
FAST & SLOW response
Time weighting & Frequency
weighting, Current reading
Analog AC/DC outputs for connection to frequency analyzer or X-Y shaft recorder
Datalogger function (8852)
Adjustable Alarm-Levels (8852)
Analog AC/DC outputs
Specifications
Standard applied
IEC61672-1 Type 2, ANSI S1.4 Type2
Accuracy
±1.4dB
Frequency range
31.5HZ ~ 8KHZ
Dynamic range
50dB
Level ranges
LO:30dB~80dB Med:50dB~100dB
Hi:80dB~130dB Auto:30dB~130dB
Time weighting:
FAST ( 125mS ), SLOW ( 1s )
Microphone
1/2 inch electret condenser microphone
Resolution
0.1dB
Display Update
2 times/sec
Analog output
AC/DC outputs, AC=1Vrms, DC=10mV/dB
Size(HxWxD): 278mm x 76mm x 50mm
Weight: 350g
EMC
EN: 50081-1, 50082-1
Accessories :
IEC61672-1
Battery, screwdriver, audio plug, windscreen, software, RS-232 cable, CD, tripod and DC 9V power supply.
www.ponpe.com
110
2007
contact:
[email protected]
DT-8850
CEM
Sound Level Meter
www.cem-meter.com.cn
dB
1.5dB Accuracy
30~130 dB
EMC
EN: 50081-1, 50082-1
8850 Sound Level funtion can be used to measure noise
in factories, schools, offices, airports and home, etc, checking acoustics of studios, auditoriums and Hi-Lo installations.
8850 meets IEC 651 Type 2 standerds. The 30 to 130 dB
range makes this meter ideal for all general purpose sound
level measurements.
Features
Provides 1.5dB accuracy
Meets IEC651 type 2 standards
Newly Design Shape
High Performance
Max Hold and Data Hold Functions
Analog AC/DC outputs for connection to an analyzer or recorder
Built-in calibration check
Specifications
Range
Low(Low)-Weighting: 35dB~100dB
Hi(High)-Weighting: 65dB~130dB
Frequency Weighting: A, C
Lo(Low)-Weighting: 35dB~100dB
Hi(High)-Weighting: 65dB~130dB
Resolution
0.1dB
Accuracy
1.5dB at 94dB sound level, 1kHz sine wave
Measurement rate
1.5 times per second, norminal
Storage temperature
-10ºC~60ºC(<80%R.H.)
Over-range
“OL” mark indication
Size(HxWxD): 251mm x 63.8mm x 40mm
Weight: 250g
Accessories :
9V battery, Carrying case and Gift box.
www.ponpe.com 2007
111
contact:
[email protected]
DT-805/805L
CEM
Mini Sound Level Meter
www.cem-meter.com.cn
dB
1.5dB Accuracy (805)
30~130 dB
Backlight
EMC
EN: 50081-1, 50082-1
IEC61672-1
Level range: 30~130dB
805/805L Mini Sound level meter have a wide dynamic range from
30 to 130dB. They have different frequency weighting A and C to respond
to human sense or machine monitoring purposes. For different sound
pattern, they also supply Fast and Slow time constant setting.
Features
Provides 1.5dB accuracy (805); Provides 2.0dB accuracy (805L)
Meets IEC651 type 2 standards, IEC61672-1 Type 2 (805)
Newly Design Shape
High Performance
Max Hold and Data Hold Function
Specifications
Level Range
Low = 30 ~ 100dB
High = 60 ~ 130dB
Accuracy
±1.5dB (ref 94dB @ 1kHz)
Frequency Range
31.5Hz to 8kHz
Frequency Weighting
A, C
Time Weighting
Fast, Slow
Battery Type
9V Battery NEDA 1604, IEC 6F22, JIS 006P
Operation Temp
0ºC~40ºC(<80%R.H.)
Storage Temp
-10ºC~60ºC(<70%R.H.)
Size(HxWxD): 210mm x 55mm x 32mm
Weight: 230g
Accessories :
9V battery, Carrying case and Gift box.
www.ponpe.com
112
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
CMM/CFM Thermo-Anemometer with IR temperature
www.ponpe.com 2007
contact:
113
[email protected]
DT-8893/8894
CEM
CMM/CFM Thermo-Anemometer with IR temperature
www.cem-meter.com.cn
CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer
measure remote surface temperatures to 932ºF (500ºC) with 30:1 distance to spot
ratio and Laser Pointer.
CFM
CMM
Temperature
Air Flow
Backlight
Features
Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on
Large LCD display
Resolution of 0.01m/sec
20 point average for Air Flow
Super large (9999 count) LCD Backlit Display
3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Specifications
Air Velocity
Range
Accuracy
8893
8894
m/s(meter per second)
0.40~30.00
±3% ±0.20m/s
*
*
ft/min(feet per minute)
80~5900
±3% ±40ft/min
*
*
km/h(kilometers per hour)
1.4~108.0
±3% ±0.8km/h
*
*
MPH(miles per hour)
0.9~67.0
±3% ±0.4MPH
*
*
Knots(nautical miles per hour) 0.8~58.0
±3% ±0.4knots
*
*
Air Temperature
14-140ºF(-10-60ºC)
±4.0ºF(2.0ºC)
*
*
InfraRed Temperature
-58 to -4ºF(-50 to -20ºC)
±9.0ºF(5.0ºC)
*
*
-4 to 932ºF(-20 to 500°C)
±2% reading
Air Flow
Range
Area
CFM
0-999900
0-999.9 ft2
*
*
CMM
0-999900
0-999.9 m2
*
*
IR
CFM
CMM
Temperature
Air Flow
IR TEMP.
Backlight
20 point average for Air
Flow
Resolution of
0.01m/sec
EMC
EN: 50081-1, 50082-1
Size(HxWxD): 203mm x 75mm x 50mm
Weight: 280g
Accessories :
9V battery and NTC temperature probe, IR temperature probe, Anemo probe
www.ponpe.com
114
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
CFM/CMM Thermo-Anemometer
with IR temperature
EMC
EN: 50081-1, 50082-1
www.ponpe.com
2007
115
contact:
[email protected]
DT-618/618B/619/620
CEM
CFM/CMM Thermo-Anemometer with IR temperature
CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 536ºF (280ºC) with 8:1 distance to spot ratio and
www.cem-meter.com.cn
IR
CFM
CMM
Laser Pointer.
IR Temperature
Temperature
Air Flow
Backlight
Multifunction Air Velocity Meter with wide temperature range (618/618B)
CFM/CMM Thermo-Anemometer (619)
CFM/CMM Thermo-Anemometer + InfraRed Thermometer (620)
Max/Min/Avg value with relative time stamp (619/620)
Low battery indication and Auto Power Off
Display Air Flow (CFM/CMM), or Air Velocity plus Temperature simultaneously (619/620)
Thermo- Anemometer with built-in
non-contact IR Thermometer
Resolution of 0.01m/sec
20 point average for Air Flow
Features
Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature(619/620)
Easy to set Area dimensions (cm2) are stored in the meter´s internal memory for the next power on(619/620)
Resolution of 0.01m/sec (619/620)
DT-618/618B
Thermo-Anemometer
20 point average for Air Flow (619/620)
Super large LCD Backlit Display(618/619/620)
3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable(619/620)
Type K sensor for temperature measurements (618/618B)
High Sensitive and Accurate
Large LCD display
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Specifications
Air Velocity
Range
Accuracy
m/s(meter per second)
0.40~30.00
±3% ±0.20m/s
ft/min(feet per minute)
80~5900
±3% ±40ft/min
km/h(kilometers per hour)
1.4~108.0
±3% ±0.8km/h
MPH(miles per hour)
618
618B
619
620
*
*
*
*
*
*
*
*
*
*
*
0.9~67.0
±3% ±0.4MPH
*
*
Knots(nautical miles per hour) 0.8~58.0
±3% ±0.4knots
*
*
*
*
Air Temperature
14-140ºF(-10-60ºC)
±4.0ºF(2.0ºC)
*
*
*
InfraRed Temperature
-58 to -4ºF(-50 to -20ºC)
±9.0ºF(5.0ºC)
*
*
*
-4 to 500ºF(-20 to 260°C)
±2% reading or ±4ºF(2ºF)
Air Flow
Range
Area
CFM
0-999900
0-999.9 ft2
*
*
CMM
0-999900
0-999.9 m2
*
*
DT-619
CFM/CMM ThermoAnemometer
Meter Size(HxWxD): 150mm x 72mm x 35mm
Weight: 210g (618/618B)
Accessories :
9V battery and NTC temperature probe, IR temperature probe, Anemo probe.
www.ponpe.com
CFM/CMM Thermo-Anemometer
116
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Flexible Thermo-Anemometer
www.ponpe.com
2007
117
contact:
[email protected]
DT-317/318
CEM
Flexible Thermo-Anemometer
www.cem-meter.com.cn
Features
16˝ inch Gooseneck detector is easy to measure the hard-to-reach areas.
CFM
CMM
High Sensitive and Accurate
Temperature
Backlight
Air Flow
Easy-to-use design
Double LCD digital display
Low power consumption
16˝ inch Gooseneck detector
Data Hold and MAX Hold function
Low battery indication
Specifications
Air Velocity
Range
Resolution Accuracy
m/s(meter per second)
0.60~30.00
0.01
±3% ±0.20m/s
ft/min(feet per minute)
119~5900
1
±3% ±40ft/min
km/h(kilometers per hour)
2.2~108.0
0.1
±3% ±0.8km/h
MPH(miles per hour)
1.4~67.0
0.1
±3% ±0.4MPH
Knots(nautical miles per hour) 1.2~58.0
0.1
±3% ±0.4knots
Air Temperature
14-140ºF(-10-60ºC)
0.1ºF/C
±4.0ºF(2.0ºC)
Air Flow
Range
Resolution Area
CFM
0-999900
0.1
0-999.9 ft2
Size(HxWxD): 163mm x 45mm x 34mm
Weight: 210g
EMC
EN: 50081-1, 50082-1
EN: 60825-1
Accessories :
9V battery, gift box and carrying case.
www.ponpe.com
118
2007
contact:
[email protected]
DT-8890/8890A
CEM
Differential Pressure Manometers
www.cem-meter.com.cn
The device measures Gauge/Differential Pressure , it features 11 selectable units of
measurement: inH2O , psi, bar, mbar, kPa , inHg , mmHg ,ozin,ftH2O , cmH2O, kgcm.
DIF
PC-Link
±5psi
PC interface
Pressure
Backlight
Additional features including Data Hold, Auto Power Off disabled , and an RS-232 for
capturing reading to a PC using optional software . Careful use of this meter will provide
years of reliable service.
High resolution & Accuracy
Small range manometer
Features
Larger Dual LCD with backlight
Data Hold
Max / Min / Avg value with relative time stamp
Optional RS232 software
Sensor input
Zero Adjust , Offset and DIF function
Low battery indication and Auto Power Off
EMC
EN: 50081-1, 50082-1
Specifications
8890
Repeatability
Units and Resolution
RS 232 Interface
±0.3%FSO
±0.2% (Max.+/ -0.5% FSO)
±0.2% (Max.+/ -0.5% FSO)
±0.29% FSO
Linearity/Hysteresis
Pressure Range
8890A
±0.3%FSO
Accuracy
±0.29% FSO
±5psi (±138.3 inH2O)
inH2O
0.1
±2psi (±55.40 inH2O)
inH2O
0.01
0.001
psi
0.001
psi
mbar
0.1
mbar
0.1
kPa
0.01
kPa
0.01
inHg
0.001
inHg
0.001
mmHg
0.1
mmHg
0.1
ozin2
0.01
ozin2
0.01
ftH2O
0.01
ftH2O
0.001
cmH2O
0.1
cmH2O
0.1
kgcm
0.001
kgcm
0.001
bar
0.001
bar
0.001
Size(HxWxD): 210mm x 75mm x 50mm
Weight: 280g
Accessories :
9V battery, RS232 cables, 9V power supply, CD Disk, soft tube, gift box with carrying case.
www.ponpe.com
2007
119
contact:
[email protected]
DT-8897
CEM
Differential Pressure Manometer & Flow Meter
www.cem-meter.com.cn
DIF
Pressure
DT-8897 measures Gauge/Differential Pressure, Air Velocity, Air Flow and temperature.
Additional features include Data Hold. Auto Power Off disabled.
Temperature
±5psi
CFM
CMM
Air Flow
Backlight
Larger Dual LCD display with backlight
Data Hold
Max/Min/Avg value with relative time stamp
EMC
EN: 50081-1, 50082-1
Zero Adjust, Offset and DIF function
Low battery indication and Auto Power Off
Easy to set Area dimension (up to 8 point)
Display Air Flow (CFM/CMM), or Air Velocity plus Temperature simultaneously
Specifications (Manometer)
±0.3%FSO
Accuracy
±0.2% (Max.+/ -0.5% FSO)
Repeatability
±0.29% FSO
Linearity/Hysteresis
2 in 1
±5psi (±138.3 inH20)
Pressure Range
Units
Units and Resolution
Resolution
inH20
0.1
psi
0.001
mbar
0.1
kPa
0.01
inHg
0.001
mmHg
0.1
Differential Pressure
Manometer & Anemometer
Specifications (Flow)
Air Velocity
Range
Resolution
Accuracy
m/s(meter per second)
0.40~30.00
0.01
±3% ±0.20m/s
ft/min(feet per minute)
80~5900
1
±3% ±40ft/min
km/h(kilometers per hour)
1.4~108.0
0.1
±3% ±0.8km/h
MPH(miles per hour)
0.9~67.0
0.1
±3% ±0.4MPH
Knots(nautical miles per hour)
0.8~58.0
0.1
±3% ±0.4knots
ºF
32.0 to 120.0ºF
0.1
±2.0ºF
ºC
0 to 50.0ºC
0.1
±0.1ºC
Air Flow
Range
Resolution
Area
0.001~100
0-999.9 ft2
0.001~100
0-999.9 m2
CFM (CFM=t3/min)
0-999,900t3/min
3
3
CMM (CMM=m /min)
0-999,900m /min
DT-15 Compact digital pressure temperature chart
DT-15 is a compact digital pressure temperature chart. This pocket sizes device offers
fast and accurate temperature references on a large easy to read LCD display. The automatic power down feature shuts the unit off five minutes after the last command to insure
extended battery life.
Size(HxWxD): 8897: 210mm x 75mm x 50mm
15:114mm x 50mm x 23mm
Weight:
8897: 280g
15: 60g
Accessories :
9V battery, Anemo probe, gift box with carrying case(8897).
www.ponpe.com
120
2007
contact:
[email protected]
CEM
www.cem-meter.com.cn
Widest range to 40,000Fc/
400,000 Lux
DT-1309
Light Meter with RS-232 interface
1309 light meter is easy to use with pocket size and light weight, providing
accurate display light level in terms of Foot Candles (FC) or LUX over wide range.
Just turning the Function Switch to select the “lux” scale and setting the range to
desired range, then removing the photo detector to light source in a horizontal position and reading the illuminance norminal from the LCD display. When the measurement is completed, replace the photo detector from the light source.
Over-range indication
Long life silicon photo diode inside
Measurement rate:1.5 times per second
Widest rang to 40,000FC/400,000lux
Size(HxWxD): 165mm x 76mm x 43mm
Weight: 403g
Accessories :
One 9V battery, One Photo Detector and one RS232 Dataline.
Features
LCD display counts
Auto Ranging
Analog bargraph/segments
4000
*
LUX
FC
Light (LUX/FC)
PC-Link
Backlight
PC interface
40-segments
Peak Hold
*
Specifications
Relative mode
*
Max Range
400,000Lux
Max and Data Hold
*
Accuracy
±5%±10d(<10,000Lux)
Auto Power Off
*
Low battery indication
*
Max Resolution
0.1lux/Fc
User selectable FC/Lux
*
Measuring rate
1.5 times/second
RS232
Photo Detector
115mm x 60mm x 27mm
Output
www.ponpe.com
2007
±10%±10d(>10,000Lux)
121
RS 232 Interface
contact:
[email protected]
DT-1300/1301/1308
CEM
Light Meters
www.cem-meter.com.cn
1300/1301/1308 are easy to use with pocket size and light weight, providing
accurate display light level in terms of Foot Candles (FC) or LUX over wide range.
Just turning the Function Switch to select the “lux” scale and setting the range to
desired range, then removing the photo detector to light source in a horizontal posi-
LUX
FC
Widest range to 40,000Fc/
400,000 Lux
Light (LUX/FC)
tion and reading the illuminance norminal from the LCD display. When the measurement is completed, replace the photo detector from the light source.
Over-range indication
Long life silicon photo diode inside
Measurement rate:1.5 times per second
Features
LCD display counts
1300
1301
1308
2000
2000
4000
Auto Ranging
*
Analog bargraph/segments
41-segments
Peak Hold
*
*
Relative mode
*
*
Max and Data Hold
*
*
Auto Power Off
*
*
*
*
*
*
Low battery indication
*
User selectable FC/Lux
Specifications
Max Range
50,000lux/Fc(1300,1301); 400,000Lux(1308)
Accuracy
±5%±10d(<10,000Lux)
Max Resolution
0.1lux/Fc
Measuring rate
1.5 times/second
Photo Detector
115mm x 60mm x 27mm
±10%±10d(>10,000Lux)
Size(HxWxD): 188mm x 64mm x 24.5mm(1300,1301)
Weight: 160g(1300,1301)
Size(HxWxD): 165mm x 76mm x 43mm(1308)
Weight: 403g(1308)
RT-11
Reflection coefficient detector
Accessories :
One 12V (A23) battery and One Photo Detector.(1300,1301)
One 9V battery and One Photo Detector.(1308)
EMC
EN: 50081-1, 50082-1
In order to measure the amplitude and the phase of
the reflection coefficient of a structure (S) such as a road
sign, street nameplate, placard and other reflection
coefficient, a measuring device is proposed, whereof a
portable part makes it possible to transform the microwave
measuring and reference signals into low frequency signals.
Specifications
Positive (trend) range
0~2000cd.lxm
Definition and memory
1000 points
Size(HxWxD): 165mm x 76mm x 43mm
Weight: 403g
Accessories :
One 9V battery, gift box with carrying case.
www.ponpe.com
122
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Carbon Monoxide Meter
www.ponpe.com 2007
123
contact:
[email protected]
CO-110
CEM
Carbon Monoxide Meter
www.cem-meter.com.cn
ALARM
CO
0-1000ppm
CO-110 Carbon Monoxide Meter detects the presence of carbon
>90 dB
Backlight
monoxide (CO) and measures concentrations between 1-1000 parts
per million (PPM). The Meter indicates the presence of CO by a reading on the LCD and a beeper tone. The beeper function much like
clicking of a Geiger counter:Above 200 PPM, the beeper sounds con-
High Quality Sensor
tinuously with the concentration of CO. From 35 PPM to 200 PPM,
the beeper sounds discontinuously with the concentration of CO.
Memory for 10 complete data sets
LED light & audible alarm
Features
Digital LCD Display
Auto/manual zero
Memory for 10 complete data sets
Record mode
Red & Blue LED light audible alarm
High Accuracy, quick response
Pocket size and easy to use
Fast sampling
Max Hold
Data Hold
Above 200 PPM, the beeper sounds continuously
Specifications
Operating temperature
0ºC to 50.0ºC
Storage temperature
-30ºC to 60.0ºC
Operating humidity
0-90% relative humidity (non-condensing)
Measurement Range
0 to 1000PPM
Measurement Resolution
1PPM
Accuracy
±5% or ±10PPM
Warm up period
Less than 2 seconds
Battery
9V, NEDA 1604A or equivalent
Sensor type
Stabilized electrochemical Gas-specific (CO)
Typical sensor life
3 years
Size(HxWxD): 102mm x 52mm x 29mm
Weight: 84g
EMC
EN: 50081-1, 50082-1
Accessories :
3.6V battery, Carrying case and Manual.
www.ponpe.com
124
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
ALARM
GAS
GAS Detectors
>90 dB
Features
16˝ inch Gooseneck detector
Easy to Use
Use in contaminated Environments
Pinpoint small Leaks
Combustible Gas Leak Detector
www.ponpe.com
2007
125
contact:
[email protected]
GD-3300/3303
CEM
Combustible Gas Leak Detector
www.cem-meter.com.cn
ALARM
High quality Sensor
16˝ inch Gooseneck detector
GAS
>90 dB
GAS Detectors
Features
16˝ inch Gooseneck detector is easy to measure the hard-reached areas.
Highly sensitive and reliable
Easy to Use: One-hand operation with thumb controlled tick adjust knob. Tick accelerates when sensor tip
approaches leak.
Use in contaminated Environments: Eliminates background gas concentration with fully adjustable tick rate.
Pinpoint small Leaks: Detects all combustible gas leaks even tiny leaks.
Specifications
Pump Driven field Calibrateable Range
10ppm
Sensor Type
Solid State
Alarm
Visible & Audible at 10% LEL for Methane.
Can be calibrated for other concentrations or gases.
Warm-Up
Approx. 1 minute
Response Time
Less than 2 sec. (up to 40% LEL)
Duty Cycle
Intermittent
Probe Length
16˝
Battery
3 “C” Alkaline
EMC
EN: 50081-1, 50082-1
GD-3303 Refrigerant Leak Detector
Features
16˝ inch Gooseneck detector is easy to measure the hard-reached areas.
Highly sensitive and reliable
Easy to Use: One-hand operation with thumb controlled tick adjust knob. Tick accelerates when sensor tip
approaches leak.
Use in contaminated Environments: Eliminates background gas concentration with fully adjustable tick rate.
Pinpoint small Leaks: Detects all Refrigerant leaks even tiny leaks.
Specifications
Pump Driven field Calibrateable Range
10ppm
Sensor Type
Solid State
Alarm
Visible & Audible at 10% LEL for Refrigerant leaks.
Can be calibrated for other concentrations or gases.
Warm-Up
Approx. 1 minute
Response Time
Less than 2 sec. (up to 40% LEL)
Duty Cycle
Intermittent
Probe Length
16˝
Battery
3 “C” Alkaline
Size(HxWxD): 221mm x 72mm x 46mm
Weight: 498g
www.ponpe.com
126
2007
contact:
[email protected]
GD-3000/3301
CEM
Combustible Gas Leak Detector
www.cem-meter.com.cn
High quality Sensor
GAS
GAS Detectors
GD-3000 Flammable Gas-Leak Detector
GD-3000 Gas-Leak Detector fulfils the requirements of the established European and national
Portable gas detector
guidelines. CE-conformity has been proven.
Audible and Visual Annunciation
Detects: LAG, LPG,CH4, Methane, Butane,Flammable Gas
Catalytic Combustion Sensor
Specifications
EMC
EN: 50081-1, 50082-1
Name
Portable gas detector
Function
Detecting the gas leakage and absorbing static electricity
Power consumption
DC 200mA
Battery size
Detectable gas
LNG, LPG
Temperature
-10ºC~50ºC
Humidity
95%RH or lower
Duration
About 4 hours continuously
1.5V x 2(AAA Size)
Size(HxWxD): 164mm x 21mm
Weight: 25g
Accessories :
2pcs “AAA” Alkaline Batteries.
GD-3301 Carbon Monoxide Analyzer
Features
Easy to Use: It fits comfortably in your hand and operates with the simple push of a button.
Fast Response: Pump driven design ensures immediate response.
Easy to Read: See the results even in poorly lit areas with the back light, two line LCD display.
Quick Set Up: Push zero button is much easier than manual adjust instruments.
Calibrate in the Field: No need to send your instrument to the factory for service. Eliminates time.
Specifications
Pump Driven field Calibrateable Range
0-1000ppm
Resolution
1ppm
Response Time
3 seconds, 90% of reading in 30 seconds
Accuracy
±3ppm, ±3% of reading
Operating Temperature
0-104ºF, 5-95% Relative Humidity, non condensing
Zero Adjustment
Push Button
Battery
3 “C” Alkaline
Battery Life
20 hours continuous operation
Size(HxWxD): 221mm x 72mm x 46mm
Weight: 365g
www.ponpe.com
2007
127
contact:
[email protected]
CO-180/CO-181
CEM
Carbon Monoxide Meters
www.cem-meter.com.cn
ALARM
CO
CO-180/181 Carbon Monoxide Meter detects the presence of car-
0-1000ppm
bon monoxide (CO) and measures concentrations between 1-1000 parts
per million (PPM). The Meter indicates the presence of CO by a read-
>90 dB
High quality Sensor
ing on the LCD and a beeper tone. The beeper function much like
clicking of a Geiger counter:Above 200 PPM, the beeper sounds continuously with the concentration of CO. From 35 PPM to 200 PPM,
the beeper sounds discontinuously with the concentration of CO.
Memory for 10 complete data sets
LED light audible alarm
Features
CO-180
CO-181
Digital LCD Display
*
*
Auto zero
*
Auto/manual zero
*
*
Memory for 10 complete data sets
*
Record mode
*
LED light audible alarm
*
High Accuracy, quick response
*
*
Pocket size and easy to use
*
*
Fast sampling
*
*
Max Hold
*
*
Data Hold
*
Auto Power Off
*
*
EMC
Above 200 PPM, the beeper sounds continuously
*
*
EN: 50081-1, 50082-1
Specifications
Operating temperature
0ºC to 50.0ºC
Storage temperature
-30ºC to 60.0ºC
Operating humidity
0-90% relative humidity (non-condensing)
Measurement Range
0 to 1000PPM
Measurement Resolution
1PPM
Accuracy
±5% or ±10PPM
Warm up period
Less than 2 seconds
Battery
9V, NEDA 1604A or equivalent
Auto Power Off
after 15 minutes of inactivity
Sensor type
Stabilized electrochemical Gas-specific (CO)
Typical sensor life
3 years
Size(HxWxD): 160mm x 56mm x 40mm
Weight: 180g
Accessories :
9V battery, Carrying case and gift box.
www.ponpe.com
128
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Temperature and Humidity Datalogger
www.ponpe.com
2007
129
79
contact:
[email protected]
DT-171/172
CEM
Temperature and Humidity Datalogger
www.cem-meter.com.cn
DATA
You can monitor temperature and humidity values efficiently and conveniently for
long time periods by using the Datalogger.The readings are saved in the logger and simply read out by your PC with USB interface.The LCD can show current readings, MAX,
LOGGER
0~100% RH
Temperature
PC-Link
PC interface
MIN and sign of alarm.
Memory for 16000 readings
LCD to show some logging information easily (172)
Freely selectable measurement cycle from 1sec. to 2h
Battery life of more than 3 years
Display all status information through two LEDs
Download collected data through PC’s USB interface
Alarm display if user-defined maximum/minimum values are
exceeded
Analysis software used to view graph for logging data
Specification
Meas. range
0 to 100%RH, -40 to 70ºC
Accuracy
±2%RH, ±0.5ºC
Resolution
0.1%RH,0.1ºC
Memory
32000(16000 for temperature and remainings for humidity)
Measuring rate
1sec. to 2h
Battery life
typically 3 years
Analysis software
windows 98/2000/XP
Size(HxWxD): 171:130mm x 30mm x 25mm
172: 94mm x 50mm x 25mm
Weight:
171: 20g
172: 45g
Accessories :
3.6V Lithium battery and CD software.
www.ponpe.com
130
2007
contact:
[email protected]
DT-21/22/2232
CEM
Multifunction Environment Meters
www.cem-meter.com.cn
dB
Voltage
Temperature
0~100% RH
35~100 dB
21/22/2232 digital Multifunction Environment Meter have been designed to combine the functions of Sound Level Meter, Light Meter, Humidity Meter, and Temperature Meter. They are ideal
LUX
FC
Multifunction Environment Instruments with scores of practical applications for professional and
home use.
Light (LUX/FC)
21: 5 in 1 higher performance multi-tester.
22: 4 in 1 environment meter. It is mini size with
EN
high technology for professional use.
2232: 4 in 1 multifunction environment meter
61010-1
CATII
600V
with PC Interface.
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1, EN: 61010-02-031
Features
Digital display counts
21
22
2232
2000
2000
4000
PC Interface
*
Auto Power Off
Low battery indication
*
Multimeter Function
*
*
*
*
*
Specifications
Function
Max Range
Resolution
Basic Accuracy
21
22
Light
20,000 Lux
0.1 Lux
±0.5%±10d
*
*
Sound
100dB
0.1dB
±3.5dB
*
*
Humidity
95%RH
0.1%RH
±5%RH
*
*
*
*
40,000 Lux
*
130dB
*
1300ºC
0.1ºC
±3%±1d
750ºC/1400ºF
0.1ºC/0.1ºF
±3%±2d
Voltage DC
600V
0.1mV
±0.5%±2d
*
Voltage AC
600V
100mV
±1.2%±10d
*
Current DC
10A
0.1uA
±1.0%±2d
*
Resistance
2MΩ
0.1Ω
±0.8%±2d
*
Temperature
2232
*
*
*
40MΩ
Size(HxWxD): 121mm x 60.6mm x 40mm
Weight: 280g
Accessories :
21/22: Rubber holster, 9V battery, Test leads and K-Type temperature probe.
2232: Rubber holster, Test leads, K-Type temperature probe, 9V battery, RS-232
PC cable & Software diskette.
www.ponpe.com
2007
131
contact:
[email protected]
DT-8820
CEM
4 in 1 Multifunction Environment Meter
www.cem-meter.com.cn
dB
The 4 in 1 digital Multifunction Environment Meter has been designed to combine the
functions of Sound Level Meter, Light Meter, Humidity Meter, and Temperature Meter. It is
an ideal Multifunction Environment Meter Instrument with scores of practical applications for
Temperature
0~100% RH
35~100 dB
LUX
FC
Light (LUX/FC)
professional and home use.
The Sound Level function can be used to measure noise in factories, schools, offices,
home, etc, checking acoustics of studios, auditoriums and hi-fi installations.
The Light function is used to measure illuminance in the field. It is fully cosine corrected for
the angular incidence of light. The light sensitive component used in the meter is a very stable,
long life silicon ciode.
The Humidity/Temperature uses a humidity/semiconductor sensor and K type
thermocouple.
EMC
EN: 50081-1, 50082-1
Features
4 in 1 for Light meter, Sound level meter, Humidity/Temperature meter.
31/2 large LCD display
Data Hold and Max Hold
Auto Power Off
"OL" Over-range indication
"BAT" Low battery indication
Specifications
Function
Range
Resolution
Accuracy(%rdg+digits)
0.1ºC
±(3.0%+2ºC)
-20ºC~750ºC
1ºC
±(3.0%+2ºC) ≤150ºC; ±3.0% ≥150ºC
-4ºF~200ºF
0.1ºF
±(3.0%+2ºF)
-4ºF~1400ºF
1ºF
±(3.0%+2ºF) ≤302ºF; ±3.0%≥302ºF
20,200,2000,20000
0.01,0.1,1
±(5.0%+10d)
0.1%RH
±5.0%RH at 25ºC
0.1dB
±3.5dB at 94dB sound level, 1KHz sine wave
Temperature -20ºC~200ºC
Light
(2000 x 10 Lux)
Humidity
35%~95%RH
Sound Level 35dB~100dB
Size(HxWxD): 251mm x 63.8mm x 40mm
Weight: 250g
Accessories :
9V battery and K-type temperature probe,
humidity prode, light probe, gift box with
carrying case.
www.ponpe.com
132
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional Multifunction Environment Meters
www.ponpe.com
2007
133
contact:
[email protected]
DT-8898/8899
CEM
Professional Multifunction Environment Meters
www.cem-meter.com.cn
dB
30~130 dB
IR
0~100 %RH
Type K TEMP.
IR Temperature
Backlight
The digital Multifunction Environment Meter has been designed to combine the
functions of Sound Level Meter, Light Meter, Humidity Meter, Type K Thermometer and
Infrared Thermometer. It is an ideal Multifunction Environment Meter Instrument with
scores of practical applications for professional and home use.
4 in 1
dB, %RH, Type K & IR
The Sound Level function can be used to measure noise in factories, schools, offices, home,
Temperature
etc, checking acoustics of studios, auditoriums and hi-fi installations.
The Light function is used to measure illuminance in the field. It is fully cosine corrected for
the angular incidence of light. The light sensitive component used in the meter is a very stable,
long life silicon ciode.
The Humidity/Temperature use a humidity/semiconductor sensor and type K thermocouple.
Features
8898
4 in 1 for dB, %RH, Type K and InfraRed Temperature(ºC/ºF).
8899
*
5 in 1 for Anemo, %RH, Lux(Fc), Type K and InfraRed Temperature(ºC/ºF).
*
Large LCD display
*
*
Data Hold and Max Hold
*
*
Auto Power Off
*
*
"OL" Over-range indication
*
*
"BAT" Low battery indication
*
*
EMC
EN: 50081-1, 50082-1
IR
IR Temperature
LUX
FC
0~100 %RH
Type K TEMP.
Light (LUX/FC)
Backlight
Specifications
Function
Range
Resolution
Basic Accuracy(%rdg+digits)
Type K
-20ºC~1370ºC
0.1ºC
±(1.0%+1ºC)
Temperature
-4ºF~2498ºF
0.1ºF
±(1.0%+2ºF)
IR
-50ºC~550ºC
0.1ºC
±(2.0%+2ºC)
Temperature
-58ºF~1022ºF
0.1ºF
±(2.0%+4ºF)
Light
20,200,2000,20000
0.01,0.1,1
±(5.0%+10d)
0.1%RH
±2.0%RH at 25ºC
Sound Level 30dB~130dB
0.1dB
±1.5dB at 94dB sound level, 1KHz sine wave
Anemo
ft/min:80~4930
1
±(3.0%+2d)
m/sec:0.3~45.0
0.1
±(3.0%+2d)
Knots: 0.6~88.0
0.1
±(3.0%+2d)
Km/hr: 1.0~140.0
0.1
±(3.0%+2d)
MPH: 0.9~56.0
0.1
±(3.0%+2d)
Air Flow (CFM)
0 to 999.900 ±(3.0%+2d)
Air Flow (CMM)
0 to 999.900 ±(3.0%+2d)
Air Flow
(2000 x 10 Lux)
Humidity
0%~100%RH
5 in 1
Anemo, Light, %RH, Type K
& IR Temperature
Size(HxWxD): 200mm x 75mm x 50mm
Weight: 280g
Accessories :
9V battery and K-type temperature probe, IR temperature probe, %RH probe, dB probe, Anemo probe.
www.ponpe.com
134
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
CAN OBD II CODE READER
www.ponpe.com
2007
135
contact:
[email protected]
AT-8895
CEM
CAN OBD II CODE READER
www.cem-meter.com.cn
CEM AT-8895 CAN OBD II CODE READER supports the standards of OBD II,
CAN & KWP2000,and is designed to work on all OBD II compliant vehicles, also is an
easy-to-use & portable tool for the customers to read diagnostic trouble codes (DTCs)
from the on-board computers of vehicles, and determines the cause of the "Check Engine" light coming on.
Features
Fit the standards SAE J1850 PWM, SAE J1850 VPM, ISO9141-2,ISO15765 & ISO14230
Attached DB25 OBD II 16-pin connector cable provides both data and power connections,
without an output jack to electrical source
SAE J 1962 16PIN connector plug to connect with the on-board computer of vehicles
Large easy-to-read LCD screen
Built-in LED back-light with ON/OFF button
Buzzer with ON/OFF button
EMC
EN: 50081-1, 50082-1
Specifications
Read DTC
Erase DTC
Display MONITORS status
Operation Temperature
Storage Temperature
Working Voltage
Standard
0ºC~50ºC
-30ºC~60ºC
12V
SAE J1850 PWM, SAE J1850 VPM,
ISO9141-2, ISO15765 & ISO14230.
Size(HxWxD): 207mm x 75mm x 50mm
Weight: 320g
Accessories :
DB25-OBD II 16PIN 1.5M Cable, Manual in English, DTC table.
www.ponpe.com
136
2007
contact:
[email protected]
CEM
CEM
www.cem-meter.com.cn
Professional Automotive DMM with USB PC interface
www.ponpe.com
2007
137
contact:
[email protected]
AT-9995/9995e
CEM
Professional Automotive DMM with USB Interface
www.cem-meter.com.cn
Large LCD display
Wireless USB Interface (RF 433MHz)(option)
Features
Oversized high contrast 4000 counts with Bargraph backlight LCD Display
RPM measurement for automotive engines with 1 to 12 Cylinders using the
inductive pick-up
Data Hold and Relative functions
Max Hold and Min Hold
Auto Power Off
Fused current inputs and overload protection on all ranges
Specifications
Function
Max Range
Basic Accuracy
Voltage DC
400mV, 4V, 40V, 400V, 1000V
±(0.5%+2d)
Voltage AC
400mV, 4V, 40V, 400V, 750V
±(0.8%+4d)
Current DC
400uA, 4000uA, 40mA, 400mA, 4A, 20A
±(1.2%+2d)
Current AC
400uA, 4000uA, 40mA, 400mA, 4A, 20A
±(1.5%+4d)
Resistance
400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
±(0.8%+3d)
RPM(Tach)
600 ~ 4000RPM;
±(2.5%+2d)
600 ~ 12000RPM(x 10RPM)
±(2.5%+2d)
Dwell Angle
1CYL, 2CYL, 3CYL, 4CYL, 5CYL,
Duty Cycle
0.1~99.9%
±(1.5%+2d)
Period
0.1~20mS
±(3.0%+5d)
Pulse Width
0.1~10mS
±(3.0%+5d)
6CYL, 8CYL, 10CYL, 12CYL
Frequency
30kHz
±(2.0%+2d)
Temperature
-20ºC ~ 760ºC/-4ºF ~ 1400ºF
±(3.0%+2d)
Diode Check
Open circuit voltage 1.5V dc typical;
CATIII
1000V
EMC & LVD
Test current 0.3mA typical
Continuity Test
EN
61010-1
EN: 50081-1, 50082-1
EN: 61010-1,
Threshold 30Ω, Continuity Beeper 2.7kHz
EN: 61010-02-031
Size(HxWxD): 197mm x 88.4mm x 41.2mm
Weight: 635g
Accessories :
Rubber holster, Test leads, type K temperature Probe,
CD software, USB interface, Pick-up and 9V battery.
www.ponpe.com
138
2007
contact:
[email protected]
AT-9955/9955e
CEM
Automotive Digital Multimeter With IR Laser Thermometer
www.cem-meter.com.cn
IP67 Dust and waterproof
Automotive Digital Multimeter With
IR Laser Thermometer
Automotive Digital Multimeter provides multi-functions:
RPM measurement for automotive engines with 2 to 10 Cylinders using the inductive Pick-up.
Oversized high contrast 6000 counts LCD display with backlight
14 Functions including DCV, ACV, DCA, ACA, Resistance, RPM (Tach), Dwell angle, Duty cycle,
Frequency, Temperature (IR Temperature) (ºC/ºF), Capacitance, Continuity and Diode Check.
Read pulse duty cycle and dwell angle for electronic fuel injection feedback carburetors, and ignition
Data Hold and Relative functions.
Over-range indication
Auto Power Off.
Fused current inputs and Overload protection on all ranges.
Measures Milliseconds pulse width to test on-time of fuel injectors, idle air control motors, and electronic transmission controls.
EN
61010-1
CATIII
1000V
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
Specifications
Function
Range
Basic Accuracy
Voltage DC
400mV, 4V, 40V, 400V, 1000V
±(0.5%+2d)
Voltage AC
400mV, 4V, 40V, 400V, 700V
±(0.8%+4d)
Current DC
400uA, 4000uA, 40mA, 400mA, 4A, 20A
±(1.2%+2d)
Current AC
400uA, 4000uA, 40mA, 400mA, 4A, 20A
±(1.5%+4d)
Resistance
400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
±(0.8%+3d)
RPM(Tach)
600 ~ 4000RPM;600 ~ 12000RPM(x 10RPM)
±(2.0%+2d)
Dwell Angle
4, 5, 6, 8CYL
±(2.5%+2d)
Duty Cycle
0.1~99.9%
±(1.5%+2d)
Frequency
0.001Hz~9.99MHz
±(2.0%+2d)
Temperature
-20ºC ~ 760ºC/-4ºF ~ 1400ºF
±(3.0%+2d)
IR Temperature
-20ºC ~ 280ºC/-4ºF ~ 536ºF
±(3.0%+2d)
Capacitance
40nF, 400nF, 4uF, 40uF, 100uF
±(3.0%+2d)
Pulse Width
0.1~10mS
±(3.0%+5d)
Diode Check
Open circuit voltage 1.5V dc; Test current 0.3mA typical.
Continuity Test
Threshold 30Ω, Continuity Beeper 2.7KHz
Size(HxWxD): 182mm x 82mm x 55mm
Weight: 360g
Accessories:
Test leads, type K temperature Probe, IR temperature probe Inductive
pick-up and 9V battery.
www.ponpe.com
2007
139
contact:
[email protected]
CF-01/01S/02/02S/03/03S/04/04S
CEM
Automotive Current Testers
www.cem-meter.com.cn
Measuring adaptor for easy current detection and
measurement of 20A currents on blade-type be
connected to any commercially available by a
4mm-banana plug/pin plug.
Specifications
CF-01
1999 counts LCD display
CF-02
*
Maximum measuring voltage: 48V max. current 20A
*
*
Cable length: approx. 75cm
*
*
Size(HxWxD): CF-01/01S: 84mm x 30mm x 10mm
Weight: 77g
Size(HxWxD): CF-02/02S/03/03S/04/04S: 86mm x 37mm x 28.5mm
Max-Blade Type
Weight: 68g
Mini-Blade Type
TP-5
Tire Pressure Gauge
White LED lighted tip helps you find the tire stem easily
Much easier use than conventional air gauges
Yellow pushbutton turns on/ off and units selected
Measures tire pressures of 5 to 100 pounds per square inch (PSI)
Press yellow pushbutton turns on, LCD display 0.0 PSI
Take the tire gauge spiracle at the tire stem, then the
Tire gauge will memorize the maximal pressure value
Press yellow pushbutton to select the different units, takes turns as PSI Kpa Bar
Press yellow pushbutton 5s to turn off the tire gauge
Specifications
Range
5-100PST
Accuracy
±(1%+0.5)PSI
Size(HxWxD): 156mm x 42mm x 20mm
Weight: 77g
Accessories:
One CR 2032 button battery.
www.ponpe.com
140
2007
contact:
[email protected]
AT-9950DIS/AT-950A/AT-950B
CEM
Automotive Multimeters
www.cem-meter.com.cn
AT-9950DIS/AT-950A/950B are very versatile automotive meters and can be used for
many different diagnostic works on car and truck. Many functions are offered for your choice.
EN
61010-1
CATIII
600V
AT-9950DIS: RPM (RPM 2 Stroke or 4 Stroke mode active) measurements for automotive
engines with the Inductive Pickup
AT-950B: RPM measurement for automotive engines with the inductive Pickup.
AT-950A: RPM measurements for automotive engines wtih the test leads.
Read pulse duty cycle and dwell angle for electronic fuel injection feedback carburetors and
ignition.
Features
Digital display counts
9950DIS
950A
950B
3200 with Analog Bargraph
2000
2000
*
*
*
*
Auto ranging
*
Manual ranging
Overload protection on all ranges
*
Data Hold
*
Auto Power Off
EMC & LVD
EN: 50081-1, 50082-1
Low battery indication
*
Inductive Pick-up
*
*
*
*
EN: 61010-1,
EN: 61010-02-031
Specifications
Function
Max. Range
Resolution
Basic Accuracy
Voltage DC
600V
0.1mV
±(0.5%+2d)
9950DIS
1000V
0.1mV
±(0.5%+2d)
*
Voltage AC
750V
1mV
±(1.0%+2d)
*
Current DC
10A
0.1uA
±(1.5%+2d)
*
Current AC
10A
0.1uA
±(1.5%+2d)
*
Resistance
32MΩ
950A
950B
*
*
*
*
0.1Ω
±(2.0%+3d)
32M
20M
20M
RPM (Tach) 12000RPM
1RPM
±(2.0%+5d)
*
10000RPM
*
Dwell Angle 2~10CYL
0.1º
±(1.2%+2d)
*
*
*
Frequency
32kHz
0.1Hz
±(1.2%+2d)
*
Duty Cycle
0.1%~99.9%
0.1%
±(1.2%+2d)
*
0.1ºC/ºF
±(3.0%+3d)
*
Temperature 760ºC/1400ºF
Diode Test
*
*
*
Continuity Check
*
*
*
Size(HxWxD): AT-9950DIS : 189mm x 91mm x 31.5mm
AT-950A/AT-950B : 209mm x 43mm x 30mm
Weight: AT-9950DIS : 280g
AT-950A/AT-950B : 200g
Accessories:
9V Battery, Rubber holster and Inductive pick-up(except AT-950A)
www.ponpe.com
2007
141
contact:
[email protected]
AT-205P/AT-9945
CEM
Automotive Digital Multimeters
www.cem-meter.com.cn
Large LCD display
Automotive Digital Multimeter provides multi-functions:
RPM measurement for automotive engines with 2 to 10 Cylinders using the inductive Pick-up.
Oversized high contrast 4000 counts LCD display with backlight
13 Functions including DCV, ACV, DCA, ACA, Resistance, RPM (Tach), Dwell angle, Duty
cycle, Frequency, Temperature (ºC/ºF), Capacitance, Continuity and Diode Check.
Read pulse duty cycle and dwell angle for electronic fuel injection feedback carburetors, and
ignition
Data Hold and Relative functions.
Over-range indication
Auto Power Off.
Fused current inputs and Overload protection on all ranges.
AT-9945 measures Milliseconds pulse width to test on-time of fuel injectors, idle air control
motors, and electronic transmission controls.
EMC & LVD
EN: 50081-1, 50082-1
EN: 61010-1,
EN: 61010-02-031
EN
61010-1
CATIII
600V
Specifications
Function
Range
Basic Accuracy
Voltage DC
400mV, 4V, 40V, 400V, 1000V
±(0.5%+2d)
Voltage AC
400mV, 4V, 40V, 400V, 700V
±(0.8%+4d)
Current DC
400uA, 4000uA, 40mA, 400mA, 4A, 20A
±(1.2%+2d)
Current AC
400uA, 4000uA, 40mA, 400mA, 4A, 20A
±(1.5%+4d)
Resistance
400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
±(0.8%+3d)
RPM(Tach)
600 ~ 4000RPM; 600 ~ 12000RPM(x 10RPM)
±(2.0%+2d)
Dwell Angle
4, 5, 6, 8CYL
±(2.5%+2d)
Duty Cycle
0.1~99.9%
±(1.5%+2d)
Frequency
0.001Hz~9.99MHz
±(2.0%+2d)
Temperature
-20ºC ~ 760ºC/-4ºF ~ 1400ºF
±(3.0%+2d)
Capacitance
40nF, 400nF, 4uF, 40uF, 100uF
±(3.0%+2d)
Pulse Width (9945)
0.1~10mS
±(3.0%+5d)
Diode Check
Open circuit voltage 1.5V dc; Test current 0.3mA typical.
Continuity Test
Threshold 30Ω, Continuity Beeper 2.7KHz
Size(HxWxD): AT-205P: 146mm x 66mm x 41.5mm
AT-9945: 195mm x 92mm x 38mm
Weight:
AT-205P: 200g;
AT-9945: 380g
Accessories:
Rubber holster, Test leads, type K temperature
Probe, Inductive pick-up and 9V battery.
www.ponpe.com
142
2007
contact:
[email protected]
DT-6234B/DT-6236B/AT-6
CEM
High Accuracy Tachometers
www.cem-meter.com.cn
AT-6 Digital Tachometer
AT-6 Digital Tachometer provides fast and accurate Non-contact RPM and TOT measurements
of rotating objects. Using reflective tape on object to be measured and pointing the laser.
Features
Display
Large 5 digit LCD display
Accuracy
±0.05%±1d
RPM Range
2 to 99,999
Max RPM Resolution
0.1RPM
TOT Range
0-99,999
Memory
Built-in memory recalls Max/Min/Last
Size(HxWxD): 160mm x 60mm x 42mm
Weight: 151g
Accessories:
9V battery and Carrying case.
DT-6234B/6236B Digital Tachometer
Fast and accurate RPM and surface speed measurements. 6234B Digital Tachometers provides
fast and accurate Non-contact RPM and surface speed measurements of rotating objects. Using reflective tape on object to be measured and pointing the integral light beam or laser. 6236B contact Tachometer combines both contact and non-contact models for use in all applications.
Large 5 digit LCD display is easy to read.
Autoranging with 0.05% accuracy
Non-Contact
EMC
EN: 50081-1, 50082-1
Built-in memory recalls last Max/Min value stored
Features
6234B
6236B
Large 5 digit LCD display
*
*
Autoranging with 0.05% accuracy
*
*
Built-in memory recalls last Max/Min value stored
*
*
Non-contact measurement
*
*
Contact measurement
*
Specifications
Contact/Laser Photo
6234B
6236B
Display Counts
99,999 counts LCD
99,999 counts LCD
Range RPM
2.5 to 99,999
5 to 99,999
Basic Accuracy
±0.05%±1d
±0.05%±1d
Max RPM Resolution
0.1RPM
0.1RPM
M/min
0.05 to 1999,9
Size(HxWxD): 160mm x 72mm x 37mm
Weight: 200g
Accessories:
6236B: Cone, RPM sensor tip, Surface speed wheel, Four 1.5V
AA batteries and Carrying case.
6234B: Reflective tape, Four 1.5V AA batteries and Carrying case.
www.ponpe.com
2007
143
contact:
[email protected]
Automotive Testers
CEM
www.cem-meter.com.cn
BT-12
Digital Automotive Battery Analyzer
3 colors LED indicate different conditions
BT-12
AT-05A
Automotive Tachometer
Professional digital tachometer measures accurate engine RPM
with Inductive Pick-up
AT-05B
Automotive Tachometer
RPM measurement for automotive engines with 1 to 8 Cylinders .
EMC
EN: 50081-1, 50082-1
AT-05A
AT-05B
AT-953
RT-01
Refractometer for Anti-freeze & Battery Fluid testing
Range: Ethylene glycol 1.15-1.30 specific gravity
Minimum Scale Division: 5ºC
Automatic Temperature
Compensation range: 10 to 30ºC
www.ponpe.com
144
2007
contact:
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement