advertisement
Content ID# rfg032073 RICOH Americas Corporation
Product Support Guide
D052 / D053 / D054
Introduction
Model Type
Launch Date
B/W MFP
4/2008
S/N Configuration
Product Code
Brand/Model Name
Product Code
D052
D053
D054
M92 / M93 / M94
D052 / D053 / D054
Gestetner
MP 6000 / 6000SP
MP 7000 / 7000SP
MP 8000 / 8000SP
Lanier
LD260 / 260SP
LD270 / 270SP
LD280 / 280SP
Ricoh
Aficio MP 6000 / 6000SP
Aficio MP 7000 / 7000SP
Aficio MP 8000 / 8000SP
Savin
8060 / 8060sp
8070 / 8070sp
8080 / 8080sp
Product Concept
Provide higher productivity with established superior features for business excellence in an office environment.
The model MT series has successively established the top position with its excellent features to improve office efficiency. The B246 series provided the following advanced features:
Productivity, Usability, Security, Energy-saving
The D052 Series will increase productivity by its cpm speed-up, in addition to the superior features above.
Ver.1.5 Page 1 of 41
Subject to change without notice
12/12/2008
Order Numbers
Main Frame
Name
Gestetner
Model
MP 6000 / 6000SP
MP 7000 / 7000SP
MP 8000 / 8000SP
Lanier
LD260 / 260SP
LD270 / 270SP
LD280 / 280SP
Product Support Guide
D052 / D053 / D054
EDP Code
414338 / 414340
414341 / 414342
414343 / 414344
N/A
Lanier ID
479-1946 / 479-1947
479-1948 / 479-1949
479-1950 / 479-1951
Notes
N/A -
-
Ricoh
Aficio MP 6000 / 6000SP
Aficio MP 7000 / 7000SP
Aficio MP 8000 / 8000SP
414338 / 414340
414341 / 414342
414343 / 414344
N/A -
Savin
8060 / 8060sp
8070 / 8070sp
8080 / 8080sp
414338 / 414340
414341 / 414342
414343 / 414344
Options
Item
SR970
SR4000
SR842
Description
3000-sheet Finisher w/50-sheet Stapler
2,000-sheet Booklet
Finisher
3000-sheet Finisher w/100-sheet Stapler
RT43* Large Capacity Tray
Punch Unit Type 3260
NA 2/3
Punch Unit Type 1075
NA 2/3
Cover Interposer Tray
Type 3260
2/3 Hole Punch for
SR970/SR980/SR4000
2/3 Hole Punch for
SR842
Cover Interposer
Copy Tray Type 2075 Copy Tray
8 1/2" x 14" Paper
Size Tray Type 1075
Key Counter Bracket
Type 1027
Tab Sheet Holder
Type 3260
LG/B4 Option
Key Counter Bracket
Tab Sheet Holder
N/A -
EDP Code Lanier ID
Product
Code
413321 216-1227 B701
413319 479-1679 B700
Common /
Unique
Common with
B246 Series
Common with
B246 Series
413310 479-1759 B706
Common with
B246 Series
414517 481-7624 B473
412209 216-7116 B702
Unique to D052
Series
Common with
B246 Series
411198 481-0529 B531
412213 216-7118 B704
Common with
B246 Series
Common with
B246 Series
412190
411187
412537
412203
216-7113
481-0534
481-0478
216-7112
B756
B474
B452
B499
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
Ver. 1.5 Page 2 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Options
Item
A3/11"x17" Tray Unit
Type 1075
G3 Interface Unit
Type 7500
Description
A3/11"x17" Tray for
Tandem Tray 1
Additional G3 line
EDP Code Lanier ID
Product
Code
Common /
Unique
411185 481-0533 B475
Common with
B246 Series
Card Reader Bracket
Output Jogger Unit
Type 3260
Output Jogger Unit
Type 1075
File Format Converter
Type C
Copy Connector Kit
Type 7500
Z-folding Unit ZF4000
USB Host Interface
Unit Type A
DataOverwriteSecurity
Unit Type C
Type 7500
Removable Hard
Drive
Type 7500 Additional
Removable Hard
Drive
Card Reader Bracket
Output Jogger for
SR970/SR4000
Output Jogger for
SR842
File Format Converter
Copy Connector Kit
Z-Folding Unit
USB Host Interface
HDD Data Overwrite
Unit
Common with
B246 Series
Common with
B246 Series
411989 481-0868 B735
Common with
B246 Series
Removable Hard Drive 002849MIU 481-7303
Additional Removable
Hard Drive
411203
412823
412809
481-0539 B498
412212 216-7117 B703
411206 481-0538 B513
481-7053
481-7023
B609
B842
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
412805
412867
479-1714
481-7057
002850MIU 481-7304
B660
B825
-
-
Common with
B246 Series
Common with
B246 Series
VM Card Type C Java VM Card
Fax Option Type 7500 Fax Option
413210
413491
481-7072
481-7190
B861
B819
Common with
B246 Series
Common with
B246 Series
413494 481-7191 B820
Common with
B246 Series
001342MIU 481-0174
414367 481-7593
-
D406
Common with
B246 Series
Unique to D052
Series
32MB Memory
400dpi/SAF
Fax SAF Memory
Printer / Scanner Unit
Type 8000
Printer / Scanner Unit
Printer / Scanner
Printer / Scanner
Printer / Scanner
PostScript 3 Unit Type
7500
Copy Data Security
Unit Type C
Ricoh Printer/Scanner
Bundle
Savin Printer/Scanner
Bundle
Lanier Printer/Scanner
Bundle
PostScript 3 Unit
Unauthorized Copy
Control Unit
003445miu -
003446miu -
-
-
U
U
003458miu - - U
412916 481-7021 B525
Common with
B246 Series
412808 481-7022 B829
Common with
B246 Series
Ver. 1.5 Page 3 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Options
Item
Browser Unit Type B
Description
Web Browser
CS391 9-bin Mailbox 9-bin Mailbox
IEEE 1284 Interface
Board Type A
IEEE 1394 Interface
Board Type B
IEEE 802.11b
Interface Unit Type N
IEEE 1284 Interface
Board
IEEE 1394 Interface
Board
Wireless LAN Interface
Bluetooth Interface
Unit Type 3245
Gigabit Ethernet Type
7300
1000Base-T Ethernet
BK5010 Plockmatic
Booklet Maker
CF5010 Cover Feeder
TR5010 Trimmer
Plockmatic
Bookletmaker
Plockmatic Cover
Feeder
Plockmatic Trimmer
BF5010 Book Folder
(requires Trimmer)
Plockmatic Book
Folder
BK5010 Rail Unit Plockmatic Rail Unit
GBC StreamPunch III GBC StreamPunch III
GBC Die Set 3 Hole
(Ring Binder)
Die Set
GBC Die Set 11 Hole
(Velobind)
Die Set
GBC Die Set 19 Hole
(Cerlox)
GBC Die Set 21 Hole
(Twin Loop Wire 2:1)
GBC Die Set 32 Hole
(Twin Loop Wire 3:1)
Die Set
Die Set
Die Set
EDP Code
413083
412191
Lanier ID
481-7059
216-1229
Product
Code
B828
B762
411699 481-0786 B679
412995 481-0683 B581
Common /
Unique
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
Common with
B246 Series
414525 481-0907 B736
Unique to D052
Series
402302
413101 479-1720
413102 481-7078
413103
413104 481-7077
413105
414387
481-0893
481-7076
481-7079
001450MIU 481-0736
001451MIU 481-0737
001452MIU 481-0738
001453MIU 481-0739
001454MIU 481-0740
G381
-
-
-
-
-
479-1745 -
-
-
-
-
-
Common with
B246 Series
Common with
B246 Series
-
-
-
-
-
-
-
-
-
-
-
GBC Die Set 44 Hole
(Color Coil)
Die Set 001455MIU 481-0741
GBC Die Set 32 Hole
(Pro Click)
Die Set 002493MIU 481-7066
*
RT43 LCT has been modified slightly to accommodate 80ppm model.
Ver. 1.5 Page 4 of 41
Subject to change without notice
-
-
12/12/2008
-
-
Product Support Guide
D052 / D053 / D054
Supplies/Yields
Name/Description
Toner Type 6110D (Black)
Toner Type 6075 (Black)
Toner 6002/7502 (Black)
Toner (Black)
Developer Type 24 (Black)
Developer Type 6075 (Black)
Developer Type DD9 (Black)
Staple Type H for SR842
Staple Refill Type H for SR842
Staple CSC810A for SR842
Staple Refill CSC810B for SR842
Staple Type H SC585 for SR842
Staple Refill Type H SC585 for SR842
Staple Type K for SR970/SR4000
Staple Refill Type K for SR970/SR4000
Staple CSC760A for SR970/SR4000
Staple Refill CSC760B for SR970/SR4000
Staple Type K SC645
Staple Refill Type K SC645
410508
410509
410801
410802
Ricoh
Product
Code
885400
**B0649645
Savin
Product
Code
9883
Lanier
Product
Code
Gestetner
Product
Code
Packaging
Yield
(CTN)
4 x 1,100 g./Btl. 172,000*
4 x 1,100 g./Btl. 172,000*
480-0089
89883 4 x 1,100 g./Btl. 172,000*
4 x 1,100 g./Btl. 172,000*
480-0090 1-Each
**B0649645
9849
9850
9858
9859
117-0334
117-0332
480-0063
480-0062
Staple Type L for SR4000 (Saddle Stitch) 411240 9885
Staple Refill Type L for SR4000
(Saddle Stitch)
Staple CSC860A for SR4000
(Saddle Stitch)
Staple Refill CSC860B for SR4000
(Saddle Stitch)
Staple Type L for SR4000 (Saddle Stitch)
411241 9886
480-0091
Staple Refill Type L for SR4000
(Saddle Stitch)
480-0092
NOTE: *A4, 6% chart is used to measure the above yield. Storage period for toner is max. 1 year.
NOTE: ** Part Number
Ver. 1.5 Page 5 of 41
Subject to change without notice
**B0649645
89849
89850
89858
89859
89885
89886
1-Each 350,000
1 x 5,000/Ctn. 5,000
5 x 5,000/ Ctn. 25,000
1 x 5,000/ Ctn.
5 x 5,000/ Ctn.
1 x 5,000/ Ctn.
5 x 5,000/ Ctn.
1 x 5,000/ Ctn.
3 x 5,000/ Ctn.
1 x 5,000/ Ctn.
3 x 5,000/ Ctn.
1 x 5,000/ Ctn.
3 x 5,000/ Ctn.
1 x 2,000/ Ctn.
4 x 2,000/ Ctn.
1 x 2,000/ Ctn.
4 x 2,000/ Ctn.
1 x 2,000/ Ctn.
4 x 2,000/ Ctn.
12/12/2008
5,000
25,000
5,000
25,000
5,000
15,000
5,000
15,000
5,000
15,000
2,000
8,000
2,000
8,000
2,000
8,000
Product Support Guide
D052 / D053 / D054
Option Compatibility
1.DTL/A3 Tray
2.Tab Sheet Holder
3.LCT
4.LCT LG Unit
5.Copy Tray
6.50sheet staple Finisher-A
7.Saddle Stitch Finisher-B
8.100sheet Staple Finisher-C
9.Punch Units for Fin-A & B
10.Punch Unit for Fin-C
11.9-bin Mailbox
12.Cover Interposer
13.Jogger Unit for Fin-A & B
M
X X X X X X X X X
X X X X X
X X X X
X X X X X X
X 1 1 X X X
X X X M X X X
X 1 1 X X X X
X X
X 1 1 X X X
14.Jogger Unit for Fin-C
15.Z-folding unit
16.Printer / Scanner Unit
17. PS3
18. IEEE1394
19. IEEE1284 Centro
20. Wireless LAN
21. Bluetooth
22. 1000Base T Ethernet
23. USB Host I/F
24. Unauthorized Copy Control
Unit
25. DOS Unit
26. VM Card
27. Copy Connector
28. File Format Converter
X X X M X X X
1 1
X X X
X X X
X X X
X X X
29. Fax Option
30. G3 Interface Unit
X: Cannot be installed together
M: Must be installed together in RAC Market
1: Must be select one of these two options & installed together
Ver. 1.5 Page 6 of 41
Subject to change without notice
12/12/2008
M
M
Product Support Guide
D052 / D053 / D054
Branding Information
Branding is required as the machines are shipped as a generic version.
Ricoh version machines: You must attach the model label (provided) to the front cover.
Savin/Lanier: You must attach the model label (provided) to the front cover and set the Plug and Play name with
SP 5-907.
Configuration
Main Frame Configuration
Jogger Unit 9-bin
Mailbox
Punch Unit NA 3/2
Punch Unit EU 2/4
Punch Unit Scandinavian 4
2,000sheet
Saddle Stitch Finisher
3,000sheet_100sheet
Staple Finisher
3,000sheet_50sheet Staple
Finisher
Jogger Unit
Punch Unit NA 3/2
Punch Unit EU 2/4
Punch Unit Scandinavian 4
Copy Tray
Cover
Interposer
Z-folding unit
Model MT-C3.5 Base-unit
ARDF
1,550sheet Tandem Tray x 1
550sheet Tray x 2
100sheet Bypass Tray
Key Counter Bracket
Key Card Bracket
Unauthorized Copy Control Unit
DataOverwriteSecurity Unit
Copy Connector
VM Card
File Format Converter
USB Hosts
LCT LG Unit
LCT
DLT/A3 Tray Unit
Tab Sheet Holder
Printer/Scanner Unit
PS3 Program
IEEE1394 Unit
Wireless LAN Unit
Bluetooth Unit
IEEE1284 Centro Unit
Gigabite Ethernet
Ver. 1.5 Page 7 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
MFP Option Board Slot / SD Card Assignments
This machine has built in standard 10/100BaseT Network Interface Board (NIB) and USB2.0.
In addition to them, the customer can select 1000 Base-T Ethernet, Wireless LAN Interface (IEEE802.11b, WPA support), IEEE1394, Bluetooth or IEEE 1284 (Parallel port).
For 3rd vender IC CARD Authentication, USB Host interface is available.
Printer/Scanner
SD card
Post Script 3
SD card
SD card
Service Use only
SD Card Slot
Main (GW) Controller
PCI I/F 1 PCI I/F 2 PCI I/F3
USB Host 10/100BaseT
& USB2.0
(Standard)
IEEE1284 or
IEEE1394 or or
Wireless
LAN or
1000 Base T
& USB2.0 *2
(Option)
Bluetooth
*1. Only one out of IEEE1394, IEEE1394, Wireless LAN or Bluetooth can be installed.
*2. PCI I/F for 1000 Base T& USB2.0 and 10/100BaseT & USB2.0 cannot be selected together.
Ver. 1.5 Page 8 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Feature Comparison To Previous Version
Items
CPM
D052 Series
(New Model)
60/70/80cpm
Improvement
X
B246 Series
(Previous Model)
55/65/75cpm
HDD
Operational Panel
80GB
Large WVGA
Preview/Thumbnail Display Yes
Duty 300K
Life 9,000K
MCBC 100K X
Drum Yield
Warm up Time (sec.)
1,200K
30/30/ 60
Recovery time from Off mode (sec.)
Recovery time from Low power mode
Dual sided scanning
Paper capacity (Standard)
Paper capacity (Maximum)
30/30/ 60
10 sec.
Yes
4,300 sheets
8,300 sheets
80GB
Large WVGA
Yes
300K
9,000K
75K
1,200K
10 sec.
Yes
4,300 sheets
8,300 sheets
Ver. 1.5
Booklet Yes
Cover Interposer Yes
9 bin Mailbox
First Copy Time (seconds)
Yes
4.2/3.5/3.5
Scan to E-mail
Scan to Folder
Yes
Yes
LDAP Yes
IP v6 Printing
PDF Direct Print
Yes
Yes
Web Image Monitor Yes
NRS Yes
Windows Authentication
DOS Unit
Unauthorized Copy Control
Yes
Yes
Yes
Page 9 of 41
Subject to change without notice
12/12/2008
Yes
Yes
Yes
4.2/3.5/3.5
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Product Support Guide
D052 / D053 / D054
Feature Comparison To Previous version (GW Controller)
Item
Printer Controller for D052 Series
(New Model)
Print speed 60 / 70 / 80 ppm
Type Embedded
CPU Intel Celeron LV 866MHz
Printer Controller for B246 Series
(Previous Model)
55 / 65 / 75 ppm
Embedded
Intel Celeron LV 866MHz
Interface
<Standard>
USB2.0
Ethernet 100/10 base TX
<Option>
1. IEEE 1394
2. Wireless LAN (IEEE802.11b)
3. Bluetooth
4. IEEE 1284 Type C
5. USB Host
6. 1000Base T Ethernet
<Standard>
USB2.0
Ethernet 100/10 base TX
<Option>
1. IEEE 1394
2. Wireless LAN (IEEE802.11b)
3. Bluetooth
4. IEEE 1284 Type C
5. USB Host
6. 1000Base T Ethernet
Network protocol
TCP/IP, IPX/SPX, EtherTalk, SMB
Print language
<Standard>
RPCS, PCL5e / 6
<Option>
Adobe PostScript 3
Resolution
RPCS: 300/600/1200dpi
PCL5e: 300/600dpi
PCL6: 600/1200dpi
PS3: 300/600/1200dpi
Memory
HDD
Utility software
MAX: 512MB
(Standard 256MB Memory)
<Standard>
80.0GB
SmartDeviceMonitor for Admin
Printer Utility for Mac,
DeskTopBinder Lite
TCP/IP, IPX/SPX, EtherTalk, SMB
<Standard>
RPCS, PCL5e / 6
<Option>
Adobe PostScript 3
RPCS: 300/600/1200dpi
PCL5e: 300/600dpi
PCL6: 600/1200dpi
PS3: 300/600/1200dpi
MAX: 512MB
(Standard 256MB Memory)
<Standard>
80.0GB
SmartDeviceMonitor for Admin
Printer Utility for Mac,
DeskTopBinder Lite
Localization for
Printer Driver
RPCS/PCL: 18 Languages
PS3: 12 Languages
Ver. 1.5
RPCS/PCL: 18 Languages
PS3: 12 Languages
Page 10 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Installation
Installation Requirements
Temperature Range: 10
° C to 32° C (50° F to 89.6° F)
Humidity Range:
Ambient Illumination:
15% to 80% RH
Less than 1,500 lux (do not expose to direct sunlight)
Ventilation:
Ambient Dust:
3 times/hr/person
Less than 0.075 mg/m
3
(2.0 x 10-6oz/yd
3
)
Avoid areas exposed to sudden temperature changes:
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2”)
Do not place the machine where it may be subject to strong vibrations.
Machine level • Front to back: within 5mm (0.2”) of level
• Right to left: within 5mm (0.2”) of level
Power Requirements
Line voltage level:
D052/D053/D054: 120V 60 Hz 20A
Permissible voltage fluctuation: +/-10%
Never set anything on the power cord.
Ver. 1.5 Page 11 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Machine Space Requirements
480 mm (18.9")
425 mm (16.7")
1103 mm (43.4")
978 mm (38.5")
613 mm (24.1")
1165 mm (45.9")
90 mm (3.5")
657mm (25.9") 690 mm (27.2") 314 mm (12.4")
177 mm (6.9")
790 mm (31.1")
458 mm (18")
Ver. 1.5 Page 12 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Power Consumption / Noise Emission
Power Consumption
Auto off mode (Off mode: Stand-alone) Basic 3.3W/3.3W/3.3W*
Recovery Time BTU’s
11
Auto off mode (Sleep mode: MFP) SP sec 96
Auto off mode (Off mode: Stand alone) Basic Same as Auto off mode Same as Auto off mode 11
Energy save mode (Low power mode)
10 sec recovery mode
SP Same as Auto off mode
Basic 196W/196W/196W*
SP 207W/207W/207W*
Basic 296W/296W/296W*
SP 335W/335W/35W*
Same as Auto off mode 11
669
706
1009
1143
Stand-by mode
Note: *D052/D053/D054
Noise Emission
Model
LCT:
D052
D053
D054
Operation Mainframe
Standby 51dB
Operating 70dB
Standby 51dB
Operating 71dB
Standby 51dB
Operating 72dB
NOTE: The above measurements were made in accordance with ISO 7779.
NOTE: The measurements were taken from the normal position of the operator.
Installation Times
Unit
Installation Time
(Minutes)
10 minutes
Unit
9 Bin Mail Box:
LCT/LG Kit:
A3/DLT Kit:
Finisher (B700 / B701):
10 minutes
5 minutes
10 minutes
Printer/Scanner:
Wireless LAN:
IEEE 1394:
Finisher (B706):
Punch Unit for Finishers:
Jogger Unit for Finishers:
Exit Tray:
Data Overwrite Security Unit:
Fax Option:
Ver. 1.5
15 minutes
5 minutes
3 minutes
3 minutes
5 minutes
20 minutes
Connection Kit:
Cover Interposer:
Z-folding unit:
Tab Sheet Kit:
File Format Converter:
Page 13 of 41
Subject to change without notice
Full System
-
75dB
-
75dB
-
75dB
12/12/2008
Installation Time
(Minutes)
10 minutes
5 minutes
5 minutes
5 minutes
5 minutes
10 minutes
15 minutes
1 minute
5 minutes
Product Support Guide
D052 / D053 / D054
Storage/Transportation
Mainframe
Toner (*1)
Developer (*1)
Storage
-30 ~ 40
°C
Less than 80% RH
Storage Period: Max: 18 months / Max Stack: 3 cartons
Less than 40
0
C
Less than 80% RH
Storage Period: Max 12 month
Less than 40
0
C
Storage Period: Max 12 month
Transportation
-30 ~ 50
°C
15% ~ 95% RH
Max Stack: 1 carton
Less than 40
0
C
Less than 80% RH
Less than 40
0
C
NOTE: (*1) Do not store more than 12 hours under the temperature between 40 and 50
0
C. Do not store more than a month under the temperature between 35 and 40
0
C. Store in a dry, dark place where temperature does not exceed 40℃ on continuance storage/transportation conditions.
Special Tools & Lubricants
Item Part Number
1 A0069104
Description
Scanner Positioning Pin (4pcs/set)
2
3
A2929500
B6455010
Test Chart - OS-A3 (10 pcs/set)
SD-CARD: ASS’Y
4
5
6
7
B6456700
B6456800
A2579300
52039502
PCMCIA Card Adapter
USB Reader/Writer
Grease - Barrierta S552R
Silicon Grease G-501
8
9
10
G0219350 Loop Back Connector
B0649500 Test Chart for CIS
54429101 Setting Powder
Ricoh System Information Tool (Support Tool Version 2)
- Basic version
Q’ty Unique or Common
1 C (Model B246)
1
1
C (Model B246)
C (Model B246)
1
1
1
1
C (Model B246)
C (Model B246)
C (Model B246)
C (Model B246)
1
1
1
C (Model B246)
C (Model B246)
C (Model B246)
- Rlogtool
(For use with GW controller)
Target Reliability
Items
ACV
Max CV
PM Interval
Model D052
25k prints/month
150k prints/month
300k prints/month
Ver. 1.5 Page 14 of 41
Subject to change without notice
Model D053
150k prints/month
300k prints/month
Model D054
150k prints/month
300k prints/month
12/12/2008
Product Support Guide
D052 / D053 / D054
Parts / Special Tools / Maintenance
The yield figures are based on (LT) long-edge feed, 5% image coverage ratio, 5 copies/original (D052/D053),
10 copies/original (D054)
Copier/MFP: D052/D053/D054
Unique/Common
U: Unique for this model
C: Common with B246
Part
Number
Description
Q'ty/
Unit
PM
Interval
Unique or
Common
Around the drum
A0962063 Charge Wire Cleaning Pad
B2461233 Ozone (TOP)
Used Toner Separation Unit
1 300k C
1 300k C
1 300k C
1 300k C
1 300k C
1 300k C
2 300k C
1 600k C B2473161
Paper Feed
AF031082 Feed Roller
AF031083
AF030080
Transfer Belt Unit
By-pass Feed Roller
By-pass Pick-up Roller
3 1000k C
3 1000k C
4 1000k C
1
1
1000k
1000k
C
C
AD041126
Transfer Roller Cleaning
Blade
1 450k C
1 450k C
1 300k C
Ver. 1.5 Page 15 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Description
Q'ty/
Unit
PM
Interval
Unique or
Common
Part
Number
Fusing Unit
AE044068
B1404191
B1404192
AE030054
AE044060
AE031026
AE030053
Cleaning WEB Pressure
Roller
Cleaning WEB Pressure
Roller Bearing Front
Cleaning WEB Pressure
Roller Bearing Rear
Hot Roller Bearing
Hot Roller Stripper
Pressure Cleaning Roller
Bearing
Pressure Roller Bearing
1 300k C
C
1 600k
1 600k
C
1 600k
C
1 300k
2
5
300k
300k
1 300k
2 300k
C
C
C
C
C
1 300k
2 300K
1 300k
1 300k
C
C
C
C
ADF
AW100109 Inner Back Fusing Thermistor
Ver. 1.5
A8061295 Paper Belt
LCT: B473
Page 16 of 41
Subject to change without notice
1
80k originals
C
80k
1 originals
80k
C
C
1 1000k C
1 1000k C
1 1000k C
12/12/2008
Product Support Guide
D052 / D053 / D054
Specifications / Documentation
Machine
Configuration Console
Printing Process Four laser beams &
Electro-photographic printing
Reading Element
Original Type
Original Size
Copy / print paper size
Simultaneous Double Sided Scanner
Flatbed with moving CCD array image-sensing and Sheet through with fixed CIS array image-sensing
Book/Sheet/Object
A3 – B6 (11”x 17” – 5 1/2” x 8 1/2”(ADF)
Paper weight
Trays:
A3/DLT– A5/HLT (11”x 17” – 5 1/2” x 8 1/2”)
Bypass (standard):
A3 – A6 SEF (11”x 17” – 5 1/2” x 8 1/2”
Bypass (non-standard):
Vertical: 100-297mm /4”-12”
Horizontal: 140-432mm/5.5”-17”
Tray (1-3):
52.3 - 127.9g/m
2
(14-34lb bond)
Bypass (Standard):
52.3 - 157g/m
2
(14-43lb bond)
Bypass (Thick Paper Mode):
52.3 ~216g/m
2
(14-58lb Bond)
Duplex:
64-127.9g/m
2
(17-34lb bond)
A6 SEF: Bypass
Engine Speed
Resolution
Zoom
D052: 60ppm. D053: 70ppm. D054: 80ppm.
Marking: 1,200dpi Scanning: 600dpi
25-400%
A4/LT LEF
1% step
Warm-up time
1 st
Copy Speed
Multiple copy
Standard paper capacity
Maximum paper capacity
Output capacity
Memory Capacity
Rating power spec.
Power consumption
Dimensions
(W x D x H):
Marking: 2 levels (5 levels at max)
D052/D053: Less than 30 seconds. D054: < than 60 seconds
D052: 4.2 seconds
D053: 3.5 seconds
D054: 3.5 seconds
Up to 999
4,300 sheets
1 st
2 nd
Tray: 1,550 x 2 (Tandem) sheets
Tray: 550 sheets
3 rd
Tray: 550 sheets
Bypass: 100 sheets
8,300 sheets
LCT: 4,000 sheets
500 sheets/A4, LT 250 sheets/A3, 11” x 17”
RAM: 256MB(Standard) 512MB(Max) HDD: 80GB
NA: 120V, 60Hz, 20A
Max: 1.85kw
Approx. 690 x 790 x 1,165 (mm)
-A4/LT LEF,
-Contact glass mode,
-APS Off,
-From 1 st
Tray
-Face up
With Copy Tray
Ver. 1.5 Page 17 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Machine continued
Auto Paper Select
Manual Paper Select
Auto Tray Switch
Special Paper Display
Standard
Standard
Standard
Standard
Directional Magnification Standard
Directional Size Magnification Standard
Auto Magnification Select Standard
Stamp mode Standard
-Background Numbering
-Preset stamp (8 patterns)
-User stamp (4 patterns)
-Date stamp (5 patterns)
-Page numbering (6 patterns)
-Stamp Text
Repeat Copy
Double Copy
Border/Center Erase
Delete Inside/Outside
Margin Adjustment
Image Shift
Standard
Standard
Standard
Standard
Standard
Standard
Combine copy
Job Interrupt
Standard
-Combine 2,4,8 in 1 simplex sheet
-Combine 4,8,16 in 1 duplex sheet
-Magazine mode
Duplex Standard
-Simplex to Duplex
-Duplex to Duplex
Series copy
Clear mode
-Book 2 pages to Duplex
Standard
-Book to Simplex
-Duplex to Simplex
Standard
-Clear
-Mode Clear
-Application clear
-Clear / Stop
Standard
Standard Original Counter
(Operation Panel)
Copy Counter
(Operation panel)
Estimated Finish Time counter
Weekly Timer
Sample Copy
Job Preset
Copy Connector
Standard
Standard
Standard
Standard
Standard
Optional
Auto start
User Code
Document Server
Standard
Up to 500
Standard
1% step
(Inch/mm)
Multi language
Centering
Scanned original to be counted
Finished sets to be counted
Up to 8 jobs
8 digits
Ver. 1.5 Page 18 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Machine continued
Auto start
Copy Connector
User Program
Job recall
Original Mode
Image Density Adjustment
2 Languages Panel Switch
Standard
Optional
Standard
Not available
Text mode
Photo/Text mode
Photo mode
Pale mode
Generation Copy mode
Automatic or Manual
-Manual: 7 notch
-Automatic: Error Diffusion
Standard (Can change by UP mode)
Default: Text
Electronic Sort
Shift Sort
Rotate Sort
Standard
Electronic Stack
Staple
Standard
Option
Punch Option
(NA) 2 or 3 holes switch able
(EU) 2 or 4 holes switch able
Scandinavian 4 holes
Cover sheet Standard
Chaptering Standard
Paper designate Standard
Sort: Copy Tray
Shift sort: with optional Finisher
With optional Finisher
With optional Finisher
With optional Finisher
2 or 3/2 or 4 is selectable in UP mode.
Slip sheet Standard
ADF Standard
-100 sheets capacity or 12mm height of
Anti-humidity Heater originals stack
- Mixed size original
- SADF mode
Service option
Condensation Prevention Heater
Electronic counter
Key Counter Bracket
Key Card
Coin Lock
Service option
Standard
Option
Recommended system only
Not support
Ver. 1.5 Page 19 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Options
ARDF
Dimensions (W x D x H)
Weight
Power consumption
Noise (Power level)
Stack Capacity
Original Size
Original Weight
Original set position
Original Set
Original Feed
Special Original Setting
Original Feeding Speed
Power Source
680x560x180mm
Less than 18kg
Less than 110W
Less than 71dB
100 sheets (*1)
-Simplex
B6 – A3 (SEF)
5 1/2” x 8 1/2”- 11” x 17”(SEF)
-Duplex
A5 – A3 (SEF)
5 1/2” x 8 1/2”- 11” x 17”(SEF)
-Simplex:
40- 128 g/m
2
11- 34 lb Bond
-Duplex:
52- 128 g/m
2
14- 34 lb Bond
Left-rear corner
Face Up, First sheet on top
ADF, SADF mode
Batch, Mixed Size
75 opm (A4 LEF)
From Mainframe
Large Capacity Tray
Dimensions (W x D x H)
Weight
Power consumption
Noise (power level)
Paper Size
Paper weight
Paper capacity (*4)
314 x 458 x 659mm
462 x 458 x 659mm (*1)
Less than 20 kg
Less than 27 kg (*2)
Less than 50W
Less than 74dB
A4 LEF, B5 LEF,
11” x 8 1/2”LEF
52-128g/m2, 14-34lb Bond
4,000 sheets
2,500 sheets (*3)
Ver. 1.5
LG/B4 option for LCT
Paper weight
Paper Size
52-128g/m
2
, 14-34lb Bond
8 1/2”x 14”(LG), B4, A4 SEF, 8 1/2” x 11” SEF
Page 20 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
9-Bin Mailbox
Dimension (W x D x H)
Weight
Power consumption
Noise (Power level)
Number of Bins
Stack capacity of each bin
Paper weight
Paper size
540 x 600 x 660 (mm)
Less than 15 kg
Less than 48W
Less than 74dB
9 bins
100 sheets (*)
52-128 g/m2, 14-34 lb Bond
A5-A3
5 1/2” x 8 1/2”-11”x17”
Ver. 1.5
3,000-sheet Finisher with 100-sheet Stapler
Dimension W x D x H
Weight
Power Consumption
Noise
Configuration y
Power Source
Proof Tray
Shift Tray
800 x 730 x 980mm
Less than 65kg
Less than 100W
Less than 75dB
Console type attached base-unit with Finisher Adapter
From base-unit
Stack
Capacity*
500 sheets A4, 8 1/2”x11” or smaller
250 sheets B4, 8 1/2”x14 or larger
Paper Size
A6 SEF-A3 SEF
5 1/2”x8 1/2”- 11”x17”, 12”x18”
Z-folding
A3, B4, A4 SEF, 11x17, 8 1/2 x 14, 8 1/2 x 11 SEF
52 g/m²-216 g/m²
Paper Weight 14 lb Bond- 58 lb Bond / 110 lb Index / 80 lb Cover
Z folding: 64-80gms
Stack
Capacity*
Paper Size
3000 sheets A4 LEF, B5 LEF, 8 1/2”x11” LEF
1500 sheets A3 SEF, , B4 SEF, B5 SEF
11”x17” SEF, 8 1/2”x14” SEF, 8/1/2” x 11” SEF 12”x18”
500 sheets A5 LEF, 5 1/2”x8 1/2”LEF
100 sheets A5 SEF, 5 1/2”x8 1/2”SEF
A5 - A3 SEF
5 1/2”x8 1/2”- 11”x17”
Z-folding
A3, B4, A4 SEF, 11x17 ,8 1/2 x 14 , 8 1/2 x 11SEF
52 g/m²-216 g/m²
Paper Weight 14 lb Bond- 58 lb Bond / 110 lb Index / 80 lb Cover
Z folding: 64-80gms
Page 21 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Cover Interposer Tray
Dimension (W x D x H)
Weight
Power consumption
Noise (Power level)
Paper Size
Paper weight
Paper capacity
Original set position
Original Set
500 x 600 x 600 (mm)
Less than 12kg
Less than 43W
Less than 65dB
A5-A3
5 1/2”x 8 1/2”-11”x17”
64 – 216g/m2
17lb Bond -110 lb index, 80lb Cover
200 sheets
Center
Face-up (Normal Feed)
Face-down (Saddle Stitch)
3,000-sheet Finisher with 50-sheet Stapler
Dimension W x D x H
Weight
657 x 613 x 960mm
Less than 54kg
Less than 56kg with Punch Unit
Power Consumption
Noise
Configuration
Power Source
96W or less
71db or less
Console type attached base-unit
From base-unit
Proof Tray
Stack
Capacity*
250 sheets A4, 8 1/2”x11” or smaller
50 sheets B4, 8 1/2”x14 or larger
A5-A3 SEF, A6 SEF, B6 SEF
Size
5 1/2”x8 1/2”-11”x17”SEF, 12”x18” SEF
52 g/m²-163 g/m²
14 lb Bond- 43 lb Bond / 90 lb Index / 60 lb Cover
Shift Tray
Stack
Capacity*
3,000 sheets A4 LEF, 8 1/2”x11” LEF
1,500 sheets A3 SEF, A4 SEF, B4 SEF, B5
11”x17” SEF, 8 1/2”x14” SEF,
8/1/2” x 11” SEF,12”x18” SEF
500 sheets A5 LEF
100 sheets A5 SEF, B6 SEF, A6 SEF, 5 1/2”x8 1/2”SEF
A5 - A3 SEF, A6 SEF, B6 SEF
Size
5 1/2”x8 1/2”- 11”x17”SEF, 12”x18”SEF
52 g/m²-256 g/m²
14 lb Bond- 68 lb Bond / 140 lb Index / 90 lb Cover
Ver. 1.5
Copy Tray
Dimension (W x D x H)
400 x 335 x 70 mm
16”x 13.4”x2.8”
Weight 640g
Paper Capacity
500 sheets A4/LT
250 sheets A3, 11”x17”
Page 22 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Printer
Controller
CPU Intel Celeron LV 866MH
RAM DDR-SDRAM
512MB (Resident 256MB)
Hard Disk Drive
PDL Standard
Option
80 GB
RPCS, PCL6, PCL5e
Adobe PostScript 3
Continuous
Speed
Resolution
Fonts
A4 / LT LEF
(Plain paper)
Max.
60ppm / 70 ppm / 80 ppm
(D052 / D053 / D054)
1200 x 1200 (dpi)
Connectivity
Standard
Option
Host
Interface
PCL: 46 fonts (Truetype: 10 fonts, Intelli: 35 fonts, Bitmapped: 1 font) + International fonts:
13 Intellifonts
PS3: 136 Adobe Type 1 fonts
Standard
Ethernet (RJ-45: 100BASE-TX/10BASE-T)
USB 2.0
Option
Wireless LAN Interface (IEEE802.11b)
IEEE1394 (6 pin)
Parallel Port IEEE1284 Type C
Bluetooth
USB Host
1000Base T Ethernet
Network Protocol
TCP/IP, IPX/SPX, SMB, AppleTalk
(Auto Switching)
MIB support
Standard MIB-II(RFC1213),
MIB HostResource (RFC1514), PrinterMib (RFC1759)
Private
MIB
Ricoh Original
Network/Operating
Systems
Windows 2000 / XP / Vista Server 2003
Mac OS 8.6-9.2x, OS X 10.1 or later
Netware 3.12, 3.2, 4.1, 4.11, 5.0, 5.1, 6, 6.5
Sun Solaris 2.6 / 7 / 8 / 9 /10
HP-UX 10.X / 11.x / 11i v2
SCO OpenServer 5.0.6 / 5.0.7 / 6.0
RedHat Linux6.x / 7.x / 8.x / 9 / Enterprise
IBM AIX V4.3/5L V5.1, V5.2, V5.3
[REMARKS]
*Cyrillic (Russian), Greek, Hebrew and Arabic are included in International Fonts.
*Windows 9x (Windows 95/98/ME) and NT4.0 drivers are not supported.
Ver. 1.5 Page 23 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Controller Details
Resolution
Controller
PCL5e
PCL6
RPCS
300 / 600 (dpi)
600 / 1200 (dpi)
600/ 1200 (dpi)
PS3 (Option) 300 / 600 /1200 (dpi)
Language
Support
PCL5e
PCL6
300 / 600 (dpi)
600 / 1200 (dpi)
Drivers
RPCS 300 / 600 /1200 (dpi)
PS3 (Option) 600 /1200 (dpi)
Operation Panel 1.English, 2.German, 3.French, 4.Italian,
5.Spanish, 6.Dutch, 7.Swedish, 8.Norwegian,
9.Danish, 10.Czech, 11.Hungarian,
12.Finnish, 13.Polish, 14.Portuguese, 15.
Russian, 16. Korean,
17. Simplified Chinese, 18. Traditional
Chinese, 19. Catalan, 20. Turkish
Drivers
5.Spanish, 6.Dutch, 7.Swedish, 8.Norwegian,
9.Danish, 10.Czech, 11.Hungarian,
12.Finnish, 13.Polish, 14.Portuguese, 15.
Russian, 16. Korean,
17. Simplified Chinese, 18. Traditional
Chinese
RPCS 2.German, 3.French, 4.Italian,
5.Spanish, 6.Dutch, 7.Swedish, 8.Norwegian,
9.Danish, 10.Czech, 11.Hungarian,
12.Finnish, 13.Polish, 14.Portuguese, 15.
Russian, 16. Korean,
17. Simplified Chinese, 18. Traditional
Chinese
PS3 (Option) 1.English, 2.German, 3.French, 4.Italian,
5.Spanish, 6.Dutch, 7. Swedish, 8.
Norwegian, 9. Danish, 10. Korean, 11.
Simplified Chinese, 12. Traditional Chinese
Ver. 1.5 Page 24 of 41
Subject to change without notice
12/12/2008
Supported Environments
Product Support Guide
D052 / D053 / D054
Mac OS Environment
Mac OS 8.6 or later, Mac OS X classic
Mac OS X Native: v. 10.1 or later *1
*1: Mac OS X v.10.0.X is not supported.
*2: Mac OS X v.10.2.0 is not supported.
PostScript3 Printer for
Yes
Yes
Yes
Yes*2
UNIX Environment
Supported platforms for Unix filter
Unix Platforms
Sun Solaris
HP-UX
Red Hat Linux
SCO OpenServer
IBM AIX
Version
2.6 / 7 / 8 / 9 /10
10.x / 11.x /11iv2
6.x / 7.x / 8.x / 9.x / Enterprise
5.0.6 /5.0.7/6.0
V4.3 & 5L Version 5.1/5.2 /5.3
Above specification and schedule are subject to change. Please refer to release announcement of Unix Filter for details.
Novell Netware
Netware Server Supported Version Netware 3.12 / 3.2 / 4.1 / 4.11 / 5.0 / 5.1 / 6.0/6.5
Client OS Windows 95 / 98 / Me / NT4.0 / 2000 / XP (Professional)
SAP R/3 Environment (Device Type / Barcode & OCR Package)
R/3 version 3.x or later, mySAP ERP2004 or later
Platform Independent
Supported environments
Character Set Latin 1(Western Europe), Latin 2 (Eastern Europe),
Unicode 3.0
Supported features
Supported Barcode & OCR
Fonts*
(* BOP is procured locally.) i.e.: Input/Output Bin, Duplex, Stapling, Punching, Resolution, Collation,
EconoMode/TonerSaving, Smoothing, Page Protect, Auto Tray
Change/Opt Tray select
Barcode Fonts
(Support Latin 1 only)
OCR Fonts
Code 128, Code 39, Code 93, Codabar,
2 of 5 interleaved/Industrial/Matrix, MSI, USPS,
UPC/EAN
OCR A, OCR B
Above specification and schedule are subject to change. Please refer to release announcement of SAP device type for details.
Ver. 1.5 Page 25 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Scanner
Items
Resolution:
Scan Speed: )
Max. Scan area sRGB Support
Network Interface:
File Format
Scan Type
Image Density
SADF / Batch Mode:
Mixed Size Mode:
Specifications
100 / 200 / 300 / 400 / 600 dpi (Default =200dpi)
100 – 1200 dpi (Twain: B/W)
75ipm (A4, 200dpi)
297mm x 432mm
No
Ethernet 10 Base-T/100BaseTX, Giga Ethernet
IEEE 1394, Wireless LAN (802.11b)
Sending E-mail: SMTP, POP3
Scan to Folder: SMB, FTP, NCP
TIFF (Multi/Single), JPEG, PDF (Multi/Single)
Default: BW TEXT
Support: BW OCR, BW Text/Photo, BW Photo, BW Grayscale,
Auto Density Selection
Manual: 7 levels
Yes
No
Scan to E-mail
Requirement:
Authorization
Resolution:
MAX E-mail address# in HDD:
SMTP Gateway and TCP/IP
SMTP
POP before SMTP
100dpi, 200dpi (Default), 300dpi, 400dpi, 600dpi
2,000 addresses
Register Group address in HDD: Max. 500 addresses Minimum 100 Addresses in One Group Address
Maintain E-mail address in HDD: Direct input on operation panel,
Web Image Monitor, Smart Net Monitor
Input of destination E-mail address via soft key:
Possible, Max. 65 destinations per job
Search E-mail address in HDD: By name and E-mail address
LDAP Search: Yes
Max. address numbers per send: Max. 500 addresses per send *1
Address numbers per send: Address from HDD address book *1
Address directly input via soft key *1 *2
Attention:
Subject:
Body
Message:
Manual Input
Pre-register by user
Manual Input
Pre-register by user
Preset
Max. 500
Max. 100
Max. 100 Address looked up via LDAP *1 *2
To, cc, bcc
Max. 128 Characters via soft key
24 subjects.
Max. 20 Characters per a subject
Max. 80 Characters via soft key
5 body messages. 80 characters x 5 lines per a body message
Title name of the body message: Max. 20 characters per a name
E-mail Size (with restriction):
E-mail Size (w/o restriction):
File type:
Message: “This e-mail included attached file sent from xxxx(machine model name).”
128 - 102,400KB, Default = 2,048KB
725MB
Single Page TIFF/JPEG, Single Page PDF, Multi Page TIFF, Multi
Page PDF,
Program User Setting:
Divide and send e-mail:
Resend:
Yes (up to 10 programs)
Yes (By page or size) / No, Default = Yes(By size)
Yes / No, Default = Yes
*1: Address from HDD address book + Address input via soft key + Address looked up via LDAP = Max.500.
*2: Address directly input via soft key + Address looked up via LDAP = Max. 100.
Ver. 1.5 Page 26 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Scan to Folder
Protocol Support:
Security:
Resolution:
Register client folder address in
HDD:
Maintain client folder address in
HDD:
Destination client folder address input via soft key:
Search client folder:
SMB (Server Message Block), FTP (File Transfer Protocol)
Client folder log-in (log-in name and password)
Encryption of log-in name and password during transmission
100dpi, 200dpi (Default), 300dpi, 400dpi, 600dpi
Max. 2,000 folders
Direct input on operation panel,
WebImageMonitor, SmartNetMonitor
Yes
SMB: Network path -> User account -> Password
FTP: Server -> Network path -> User account -> Password
NCP: Network path -> User account -> Password -> Bindery or NDS
SMB: Browsing directly to the designated folders
FTP: By client folder name
NCP: Browsing directly to the designated folders
Max. 50 client folders / PCs per send Max. client folder numbers per send:
Destination Combination:
Group address:
Input Subject:
Scan File Size:
File Size when combined Scan to
Folder & Scan to E-mail:
File type:
Program User Setting:
Dividing file in Scan to E-mail:
Please refer to 4.6.4.
Max. 100 destinations (To Folder: 50, To E-mail: 100) (*1) e.g. 100 destinations 50 folders included >>>OK
100 destinations 51 folders included>>>Failure
No
No limitation (Depends on PC HDD and memory.)
128 – 102,400kB, Default = 2,048KB (With restriction)
725MB (Without restriction)
(Scan to E-mail file size applied).
Single Page TIFF/JPEG, Single Page PDF, Multi Page TIFF, Multi
Page PDF, High-compression PDF
Yes (up to 10 programs)
Yes (By page or size) / No, Default = Yes(By size)
(When Scan to PC combine with Scan to E-mail)
Yes / No, Default = Yes Resend:
(*1) User can send to Max. 100 destinations in the same group. But the number of folders has to be less than 50, since
Max. folder destinations are 50. If there are more than 50 folder destinations registered in the Group address, a message pops up.
Maximum Addresses per Send (combination of E-mail and Folder)
Scan to Email
Scan to
Folder
Input via:
Address book
Manual input
Address book
Manual input
Condition 1:
Max. addresses can select or input
500
100
50
50
Condition 2:
Max. address allowed in a single operation
500
50
Condition 3:
Combination of addresses: Max.
550
The number of destinations which users can input must satisfy all of the above 3 conditions.
Ver. 1.5 Page 27 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Fax
Compatibility:
Resolution:
Compression method:
Scanning speed (DF Used):
Number of Pages Scanned Per Minutes:
(DF Used)
Modem speed:
ITU-T (CCITT) G3, Additional G3 (option),
8 x 3.85 line/mm, 200 x 100dpi (std.),
8 x 7.7 line/mm, 200 x 200dpi (std.),
8 x 15.4 line/mm, 16 x 15.4 line/mm, 400 x 400dpi (with optional SAF memory)
MH, MR, MMR, JBIG
0.5sec.(A4/LT SEF, Standard/Detail mode),
0.5sec.(A4/LT SEF, Super Fine mode)
*ITU-T No1 chart, 200 x 100 dpi (Standard mode),
200dpi(Detail mode), 400dpi(Super Fine mode)
A4/LT SEF
A4/LT LEF/image rotation
Standard mode: 40 cpm
Detail mode: 40 cpm
Super Fine mode: 35 cpm
Standard mode: 65 cpm
Detail mode: 60 cpm
Super Fine mode: 35 cpm
33.6K – 2,400bps (G3, Standard with Automatic Shift Down)
(33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000,
9600, 7200, 4800, 2400 bps)
Transmission speed:
Page Memory Size:
SAF Memory Size:
G3: Approx.2 seconds (200x100 dpi, JBIG, ITUT #1 chart TTI off, memory transmission)
G3: Approx.3 seconds (200x100dpi, MMR, ITUT #1 chart, TTI off, memory transmission)
Standard 8MB
With Optional Memory
Standard
With Optional Memory
16MB
4MB (Approx.320 pages)
28MB (Approx. 2,240 pages)
Memory backup:
Option: 32MB SD-RAM (24MB SAF Memory + 8MB Page Memory)
One hour
Smoothing: Standard
TTI/RTI: Standard
CSI: Standard
Quick dial/ Speed dial:
Group dial:
Standard: 2,000 numbers
Standard: 100 groups (500 numbers per 1 group)
Redial: Standard
Direct fax number entry:
Dual access:
User Code:
Standard
Standard
Page counter:
Std. 100 Codes (Max. 500 codes with optional “User Account Enhance
Unit”)
Standard
Auto reduction:
Wild cards:
Summer time (day light saving time):
Standard
Standard
No
ID code programming:
Programming by OMR:
User function key:
Night timer:
Energy saver:
LCD prompt:
Remaining memory indication:
Clock adjustment:
User parameter setting:
User data transfer:
Standard (4 digits)
No
Standard (3 keys)
No
Standard
Standard
Standard
Standard
Standard
Standard
Ver. 1.5 Page 28 of 41
Subject to change without notice
12/12/2008
Transmission Specification
Product Support Guide
D052 / D053 / D054
Immediate transmission:
Memory transmission:
Serial broadcasting
Standard
Standard
Standard (Max. 500 numbers)
Send later: Standard
Error correction mode:
Page retransmission:
Standard
Standard
Forwarding: Standard
Image rotation:
Book fax:
Standard
Standard
Closed network (transmission):
Double sided transmission:
Transmission reserve:
Standard
Yes
No
Reception Specification
Automatic reception:
Manual reception:
Standard
Standard
Substitute reception:
Authorized reception:
Standard
Standard
Multi-copy: Standard
Closed network:
Reception time printing:
Center mark:
Checkered mark:
Economy printing mode:
Duplex reception:
Standard
Standard
Standard
Standard
No
Yes with option
Telephone Specification
Handset / telephone:
Telephone connection:
Monitor speaker:
Automatic voice message:
Option
Standard
Standard
No
On hook dial:
Tone transmission:
Standard
Standard
Pause: Standard
Pulse/tone selection:
Chain dialing:
Standard
Standard
Reception mode selection:
Automatic fax/phone change:
Reception mode switch over (remote):
Answering machine interface:
Reception mode switching timer:
Auto answer delay time:
Busy tone detection:
Silent ringing detection:
Standard
No
No
No
Standard
Standard (SP mode)
Standard
No
Ver. 1.5 Page 29 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Internet Fax Basic Specification
Requirement of Mainframe:
Number of Address:
E-mail Address Input:
Attention:
Destination Combination:
G3 fax option is required.
Printer Scanner option is required.
2,000 HDD storage
From LCD operation panel, Web Image Monitor, Smart Device
Monitor for Admin
“to” or “bcc” (select only one), max 500 attentions
Internet Fax + G3 Fax, Internet Fax to PC + G3 Fax
Transmit function:
Scan line density:
Original size: Scanning width:
Communication Protocols:
E-mail format:
Authentication method:
Internet communication:
E-mail send functions:
E-mail receive functions:
Ethernet/10Base-T, 100Base-TX, IEEE 1394 (IP over 1394),
IEEE802.11b (wireless LAN)
200 x 100 dpi (Standard character), 200 x 200 dpi(Detail character),
200 x 400 dpi (Fine character: optional) *1 , 400 x 400 dpi(Super
Fine character: optional) *1
A3 *1, B4 *1, A4
Transmission
SMTP, TCP/IP
Reception
POP3, SMTP, IMAP4, TCP/IP
Single/Multi-part, MIME Conversion
Attached file forms: TIFF-F (MH, MR *1, MMR*1 compression)
SMTP-AUTH, POP before SMTP, A-POP
Send and receive e-mail with a computer that has an e-mail address
Automatic conversion of sent documents to e-mail format and e-m transmission. Memory transmission only.
Automatic detection and printing of appended TIFF-F(MH) files and ASCII text. Memory reception only.
*1
Full mode
LAN Fax Basic Specification
Paper Size:
Resolution:
A3, DLT, B4, A4 (default for EU/Asia model), Letter (default for NA model), Legal, B5, A5
-Super Fine (400 x 400 dpi)
-Detail (200 x 200 dpi) *default
-Standard (200 x 100 dpi)
Gray Scale:
Number of Address:
TBD
500
OS: TBD
7.Swedish, 8.Norwegian, 9.Danish, 10.Finnish, 11.Hungarian,
12.Czech, 13.Polish, 14.Portuguese, 15.Russian, 16.Korean,
17.Traditional Chinese, 18.Simplified Chinese
Condition: OS need to have the same language.
CPU
HDD
Minimum required for each OS
Minimum required for each OS
Ver. 1.5 Page 30 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
IP-Fax Specification
Network:
Scan line density:
Original size:
Maximum scanning size:
Transmission protocol:
Compatible machines:
IP-Fax transmission function:
IP-Fax reception function:
LAN: Local Area Network
Ethernet/10base-T, 100base-TX, IEEE 1394 (IP over
1394),
IEEE 802.11b (wireless LAN)
8 x 3.85 lines/mm, 200 x 100 dpi (Standard character),
8 x 7.7 lines/mm, 200 x 200 dpi (Details character),
8 x 15.4 lines/mm (Fine character: optional expansion memory required),
16 x 15.4 lines/mm, 400 x 400 dpi (Super Fine character: optional expansion memory required)
Maximum A3 or 11” x 17” (DLT)
Standard: A3, 297mm x 432mm, Irregular: 297mm x
1200mm
Recommended: T.38Annex, TCP, UDP/IP communication, SIP(RFC 3261 compliant), H.323 v2
IP-Fax compatible machines
Specify an IP address and send faxes to an IP-Fax compatible fax through a network.
Also capable of sending faxes from a G3 fax connected to a telephone line via a VoIP gateway.
Receive faxes sent from an IP-Fax compatible fax through a network.
Also capable of receiving faxes from a G3 fax connected to a telephone line via a VoIP gateway
Document Server
Items Capability
HDD Capacity 80GB
HDD capacity for Document
Maximum stored documents
37.32 GB
3,000 documents
Maximum pages per documents
Maximum pages of all stored documents
2,000 page
10,000 sheets
Ver. 1.5 Page 31 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
MFP Supported Environments
OS
Windows 2000
Windows XP
Windows Server 2003
Type PCL5 e
PCL
6
RPC
S
PostScript3
Y *1
Server Y Y Y
Advanced Server Y *2 Y *2 Y *2
Datacenter Server N
Professional Y
N N
Y Y *3
Y *1
Y *1
N
Y *1
Home Edition
Standard Edition
Y
Y
Y Y *3
Y Y *2
Enterprise Edition Y *2 Y *2 Y *2
Datacenter Edition N
Web Edition N
N
N
N
N
Home Basic
Home Premium
Y
Y
Y
Y
Y
Y
Y *1
Y *1
Y *1
N
N
Y *1
Y *1
Windows Vista
Point & Print
Window OS
Server
Windows Server 2003
Windows XP Professional
Windows 2000 Professional, Server &
Advanced Server
NT4.0 Workstation & Server (Intel)
Client (push to)
Vista
XP
W2K Pro
Vista
XP
W2K Pro
Vista
XP
W2K Pro
Vista
XP
W2K Pro
Drivers
PCL5e/6 RPCS PS
Y
Y
Y
Y
Y
Y
Y
Y
Y
No
No
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y Y
No No
No No
No No
Ver. 1.5 Page 32 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Terminal Service & Citrix MetaFrame
Server
Windows Server 2003
Windows 2000 Server
Win 2003 Servers + MetaFrame
Win 2000 Servers + MetaFrame
Win 2003 Servers +
Citrix PresentationServer4.0
Win 2000 Servers +
Citrix PresentationServer4.0
Win 2003 Servers +
Citrix PresentationServer4.5
Win 2000 Servers +
Citrix PresentationServer4.5
Driver
PCL5e/6 RPCS
Y
Y
Y
Y
PS
Y
Y
Y
Y*1
Y
Y
Y
Y
Y No Y
Y No Y
Y No Y
No No No
Ver. 1.5 Page 33 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Utility Software
Software
For GW Controller Font Manager
Smart Device Monitor for Admin
DeskTopBinder – SmartDeviceMonitor for
Client
Device Graphic Update Module
Printer Utility for Mac
PS Descriptions
Mac OS X PPD Installer
LAN FAX Driver M10
RPCS Driver
PCL 6 Driver
PCL 5e Driver
Post Script Driver
GW Controller Network TWAIN Driver
Description
This software enables you to use screen fonts.
This software enables you to manage and monitor printers and other devices over the network.
This software enables you to access networked printers to print, monitor or to receive notifications. With DeskTopBinder Lite you can connect client computers to I/O devices enabling you to efficiently manage data.
Device Graphic Update Module provides bitmap images used to represent the various statuses of devices graphically within Smart Device Monitor or
Web Smart Device Monitor. Available on website.
This is a utility for Macintosh that provides access to several network printing administrative features.
PPD for Mac By interacting with the Adobe PostScript 3 controller in the device, this PPD is able to produce an accurate representation of the screen image.
This PPD installer is used to install a PPD (Postscript Printer Description) file on Mac OSX. PPD files contain descriptions of printer capabilities such as paper sizes, number of input trays and duplexing. Once the PPD file is installed on the system using the PPD installer, the PS driver that comes bundled with Mac OS X can use the information in the PPD to control the print device and enable full functionality. It supports the Mac OS X 10.1 or later. Please see the Readme file for information about compatibility with versions of Mac OS X.
This software enables you to fax documents directly from your computer.
The Address Book Editor and Cover Sheet Editor are installed as well. This software requires the optional fax unit to be installed on the machine. M10
Driver
Printer driver for Windows: It is optimized for the Windows GDI. High performance printing can be expected. Regularly used settings can be saved as a "one-click icon" in the driver interface. These settings can be reused easily by clicking the icon.
Printer driver for B/W printing in Windows. It supports HP PCL XL commands and is optimized for the Windows GDI. High performance printing can be expected.
Printer driver for printing in Windows. It supports HP PCL 5e commands.
By interacting with the Adobe PostScript 3 controller in the device, this driver is able to produce an accurate representation of the screen image.
TWAIN scanner driver for network connections with new features
Combine/Series, compatible with SNMP V3and Network Connection Tool.
Ver. 1.5 Page 34 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Print Driver Information
Features
Send to Job Binding
Send to Document Server
Sample Print
Locked Print
Hold Print
Stored Print
Stored Print (Shared)
Store and Print
Store and Print (Shared)
Reduce/Enlarge (Zoom/Scaling)
Fit to Paper size
Unauthorized Copy Control
Layout (N-up)
PCL 5e/
6
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y*2
Y
N
Y
RPCS
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Windows
2000/XP/Vist a
N
Y
Y
Y
Y
Y
N
Y
PostScript3
Mac OS
8.6-9.2
Y
Y
N
Y
N
Y
Y
Y
N
Y
Y
N
Y
N
Y
Y
N
Y
Mac OSX
N
Y*1
Y*1
Y*1
Y*1
Y*1
N
Y*1
N
Y
Y
N
Y
Booklet2 (Magazine)
Non-Reduction Booklet
Y
Y
Y
Y
Y
N
Adjust image position
Binding Margins
Shift Image to Edge/Corner
Creep for Booklet 2
Imposition Setting (Speed, double)
Crop Mark
Punch
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Cover sheet (Front Cover)
Back Cover
Front and Back Cover
Slip Sheet
Chaptering
Designated Sheet Print
Tab Shift Printing
Rotate by 180 degrees
Reverse Order Print
Do not print Blank pages
Edge Smoothing
Toner Saving
Ver. 1.5
Y
N
Y
Y
N
Y
Y
Y
Y
Y*3
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Page 35 of 41
Subject to change without notice
N
N
N
Y
Y
N
N
N
N
N
Y
Y
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
Y
N
N
N
N
N
Y
Y
N
N
N
N
Y
N
N
N
N
N
Y
Y
12/12/2008
N
N
N
N
N
N
Y
Features
Product Support Guide
D052 / D053 / D054
PCL 5e/
6
RPCS
Windows
2000/XP/Vist a
PostScript3
Mac OS
8.6-9.2
Mac OSX
User ID
User Code
User Authentication
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
N
Y*1
Y*1
N
User Defined Pages
Mirror Image Print
Negative Image Print
Edge to Edge Print
Limitation setting
Y
N
N
Y
Y
N
N
N
Y
Y
N
Y
Y
Y
N
N
Y
Y
Y
N
N
N
N
Y
N
Y: supported
N: not supported
*1: Available with MAC OS X 10.2 or later
*2: “Centering” feature cannot be selected from PCL driver. However PCL has this feature as the original function.
When printing with Reduce/Enlarge (Zoom) feature of PCL driver, output is automatically centered by PCL original centering function.
*3: This feature cannot be selected from printer driver. This is enabled by PCL Menu in the User Tool, which is access from MFP main unit.
Ver. 1.5 Page 36 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Counters
Total Counter Access
• User Tools / Counter Total Counter
• User Tools / Counter System Settings Administrator Tools Display / Print Counter
Total Counter Information
Physical Mete
r
• Name: Total
• Description: Total Prints/Copies
• Number of digits: 7
• Location: Inside front cover, lower right hand corner, covered.
User Tools / Counter Counter
• Name: Total Counter
• Description: Total Prints/Copies
• Number of digits: 8
User Tools / Counter System Settings Administrator Tools Display / Print Counter
Name: Total
Description: Total Prints/Copies
Number of digits: 8
Name: Copier
Description: Total Copies
Number of digits: 8
Name: A3/DLT
Description: Total DLT Copies/Prints
Number of digits: 8
Name: Printer
Description: Total Prints
Number of digits: 8
Name: Duplex
Description: Total Duplex Copies/Prints
Number of digits: 8
Name: Scanner Send
Description: Total Scanned Copies/Prints
Number of digits: 8
Ver. 1.5 Page 37 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Paper
Recommended Throughput Material and Special Paper
Not Applicable
Non Recommended Throughput Material
Refer to pages in the Operators Instructions Hardware Guide.
Do not use any of the following kinds of paper or a fault might occur:
• Aluminum Foil, Carbon paper,
• Conductive paper
• Paper meant for an inkjet printer
• Bent, folded, or creased paper
• Torn paper
• Thermal fax paper
• Art paper
• Paper with perforated lines
• Hemmed-edge paper
• Tab stock
• Slippery paper
• Perforated paper
• Rough paper
• Thin paper with little stiffness
• Paper with a dusty surface
Firmware Information
Firmware SD Card
ADF Document Feeder
Engine
Fax
Font EXP
GWFCU3-f (WW)
Language Install
Network DocBox
Network Support
OpePanel.EXP
Option PCL
Option PCL Font
Firmware Type
ADF
Engine
Fax
Font EXP
FCU
Language Install
Net File
Network Support
LCDC
Option PCL
Option PCL Font
Firmware File Name as Posted
B246_D052 ADF vxxx SDcard.zip
D052 Engine vxxx SDcard.zip *
B246_D052 Fax vxxx SDcard.zip
B246_D052 Font EXP vxxx SDcard.zip
B246_D052 Fcu vxxx SDcard.zip
B246_D052 Language vxxx SDcard.zip
B246_D052 NetFile Netdocbox vxxx SDcard.zip
B246_D052 Network Support vxxx SDcard.zip
B246_D052 Opepanel Lcdc vxxx SDcard.zip
B246_D052 Option PCL vxxx SDcard.zip
B246_D052 Option PCL font vxxx SDcard.zip
PS3 Font
PS3/PDF
Remote Fax
PS3 Font
PS3/PDF
Rfax
B246_D052 PS3 font vxxx SDcard.zip
B246_D052 PS3 PDF vxxx SDcard.zip
B246_D052 Rfax vxxx SDcard.zip
System/Copy
Web Support
Web Uapl
System/Copy
Web Support
Web Uapl
B246_D052 System vxxx SDcard.zip
B246_D052 Web Support vxxx SDcard.zip
B246_D052 Web Uapl vxxx SDcard.zip
*Important Note: All the firmware for the D052 and B246 Series (except Engine and Printer/Scanner) are the same.
The SD card folder structure, whether it’s named D052 or B246, and their files, will be selectively recognized by either series.
Ver. 1.5 Page 38 of 41
Subject to change without notice
12/12/2008
SD Card Arrangement
Product Support Guide
D052 / D053 / D054
SD CARD Romdata
Folder
D052
Folder
Firmware
File (fwu)
Contact Information
Name Contact
Technical Services Call Center (Hotline) Ricoh: (800) 537-4264
Savin/Gestetner: (800) 291-6044
Lanier: (800) 333-3147
Application Help Desk (Software
Issues)
Ricoh Phone Card: 2 Call - 000781MIU, 5 Call - 000900MIU
Savin Phone Card: 2 Call - 12992, 5 Call - 12993
Gestetner Phone Card: 2 Call - 12994, 5 Call - 12995
National Reclamation Center (800) 557-4264 http://www.nrc-usa.com
Technology Solutions Center Web Site http://www.tscweb.net
Configurator http://www.connectivity-cafe.com
Ricoh Web Site
Savin iLINC Web Site
Headquarter Web Sites
Material Safety Data Sheets
Ricoh University http://www.ricoh-usa.com/ http://www.savin.com
Ricoh Corporation: http://www.ricoh-usa.com
Savin Corporation: http://www.savin.com
Gestetner Corporation: http://www.gestetnerusa.com/
Lanier Corporation: http://www.lanier.com
(800) 336-MSDS (6737)
973.882.2200 http://www.ricohuniversity.com
Training Information
Instructor-Led Training (ILT) / Blended Learning Part ll – The current instructor-led training program
(B246 Series) will be updated to include the (D052 Series) information. This five-day course will be revised so that the (D052 Series) models are the lead products to be emphasized during the course. All significant differences between the two models will also be covered during the course. The official name of the course will be D052 Series Blended Learning Part ll.
Ver. 1.5 Page 39 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Documentation
Service Manual
Point to Point
Parts Catalog
Description EDP Code
-
-
-
RFG E-Source Number rfg005543 rfg023648 rfg031130
D052 Blended Learning Part l* (CBT) 002710miu -
*Completion of this course is a mandatory requirement for enrollment in the D052 Blended learning part ll / Instructor-led course.
Please refer to the http://www.ricohuniversity.com/ web site for the most up to date training information.
Please be aware to once a model or series is out of production, the Field Service Manual, Technical Service Bulletins and
Ricoh University should be referenced for the most current information. Check the TSC website and e-source.
Ver. 1.5 Page 40 of 41
Subject to change without notice
12/12/2008
Product Support Guide
D052 / D053 / D054
Revisions
1.0 Original
1.1 Minor font updates to training pages 39 & 40.
1.2 Note added to firmware information page 38.
1.3 Corrected firmware information page 38, removed SR4010 and SR5000.
1.4 Changed important note and file names on page 38. Added Printer Scanner bundles to page 3.
1.5 Removed DDST Driver information on page 34.
Ver. 1.5 Page 41 of 41
Subject to change without notice
12/12/2008
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project