S12700 Datasheet (Detailed Version)

S12700 Datasheet (Detailed Version)
S12700 Datasheet
(Detailed Version)
S12700 Datasheet (Detailed Version)
1 Introduction
HUAWEI S12700 series agile switches (S12700 for short) are designed for next-generation campus networks.
Using a fully programmable switching architecture, the S12700 allows fast, flexible function customization
and supports a smooth evolution to Software-Defined Networking (SDN). The S12700 uses a Huawei
Ethernet Network Processor (ENP) and provides a native Wireless Access Controller (AC) to help build a
wired and wireless converged network. Its Unified User Management capabilities deliver unified user and
service management, and Huawei's Packet Conservation Algorithm for Internet (iPCA) supports hop-by-hop
monitoring of any service flows, helping manage services in a more refined way.
The S12700 runs the Huawei Versatile Routing Platform (VRP), which provides high-performance L2/L3
switching services and rich network services, such as Multiprotocoal Label Switching (MPLS) VPN, hardware
IPv6, desktop cloud, and video conferencing. In addition, the S12700 series uses a variety of reliability
technologies, including in-service software upgrade, non-stop forwarding, hardware Eth-OAM/BFD, ring
network protection, and Cluster Switch System Generation2 (CSS2) — a switch fabric hardware clustering
technology that allows 1+N backup of Main Processing Units (MPUs). These technologies help improve
productivity and maximize network operation time, reducing Total Cost of Ownership (TCO).
2 Product Overview
2.1 Product Models
The S12700 series is available in three models: S12704, S12708 and S12712.
S12712
1
Huawei Enterprise Sx700 Series Switch Product
S12708
S12704
Table 2-1 lists the basic physical specifications of S12700 models.
Table 2-1 Physical specifications of S12700 models
Item
Description
Number of LPU slots
S12704: 4
S12708: 8
S12712: 12
Number of MPU slots
2
Number of SFU slots
S12704: 2
S12708: 4
S12712: 4
Number of fan slots
S12704: 2
S12708: 4
S12712: 5
Number of power module slots
S12704: 4
S12708: 6
S12712: 6
Number of CMU slots
2
Port density per chassis
S12704: 192xFE, 192xGE, 192x10GE, 32x40GE, 8x100GE
S12708: 384xFE, 384xGE, 384x10GE, 64x40GE,
16x100GE
S12712: 576xFE, 576xGE, 576x10GE, 96x40GE,
24x100GE
Installation
The switch can be installed in an N66E or N68E cabinet,
one cabinet for one chassis.
Cluster switch system (CSS)
CSS2, switch fabric hardware clustering
Maximum power consumption (full
configuration)
NOTE:
The heat dissipation value of a chassis is equal
to the current power consumption.
S12704: 2200 W
S12708: 4400 W
S12712: 6600 W
Power parameters
DC input voltage
• Rated voltage: -48 V DC/-60 V DC
AC input voltage
• Rated voltage: 110 V AC/220 V AC, 50/60 Hz
• Maximum voltage range: 90 V AC to 290 V AC; 47
Hz to 63 Hz (The output power reduces to half of the
maximum output when the input voltage is in the
range of 90 V AC to 175 V AC.)
Huawei Enterprise Sx700 Series Switch Product
2
Item
Description
Dimensions (W x D x H, excluding rackmounting brackets)
• S12704
With cable management frames: 442 mm x 585 mm x
441.7 mm (10 U)
Without cable management frames: 442 mm x 489 mm x
441.7 mm (10 U)
• S12708
With cable management frames: 442 mm x 585 mm x
663.95 mm (15 U)
Without cable management frames: 442 mm x 489 mm x
663.95 mm (15 U)
• S12712
With cable management frames: 442 mm x 585 mm x
841.75 mm (19 U)
Without cable management frames: 442 mm x 489 mm x
841.75 mm (19 U)
Weight (empty/fully loaded)
S12704: 29 kg/60 kg
S12708: 42 kg/100 kg
S12712: 63 kg/130 kg
2.2 Card Types
Table 2-2 lists the cards supported by the S12700.
Table 2-2 Cards supported by the S12700
Card Type
Main
Control
Unit
Card Name
Card Description
Functions and Features
Specifications
ET1D2MPUA000
S12700 Main
Control Unit A
(Optional Clock)
The system control and
management unit for the
S12704/S12708/S12712
eUSB card: 2 GB by
default, expandable to 4
GB or 8 GB
1+1 hot standby
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.88 kg
Maximum power
consumption: 100 W
ET1D2SFUA000
S12700 Switch
Fabric Unit A
ET1D2SFUC000
S12704/S12708,
Switch Fabric Unit
C
1+1 hot standby
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight:
ET1D2SFUA000: 3.32 kg
ET1D2SFUC000: 3.96 kg
ET1D2SFUD000: 3.96 kg
Maximum power
consumption:
ET1D2SFUA000: 83 W
ET1D2SFUC000: 350 W
ET1D2SFUD000: 350 W
SFU
ET1D2SFUD000
3
Huawei Enterprise Sx700 Series Switch Product
S12708/S12712,
Switch Fabric Unit
D
Card Type
Card Name
Card Description
Functions and Features
Specifications
8-port 10G
Cluster Switching
System Service
Unit (SFP+)
Provides eight 10G optical
ports for data transmission
and line-speed switching.
Hot swap
CSS service
Dimensions (W x D x H):
213.0 mm x 151.8 mm x
35.1 mm
Weight: 0.50 kg
Maximum power
consumption: 30 W
Centralized
Monitoring Unit
Device management
module: sends interface
control signals for device
management.
Backplane interface
module: provides
management channels
for power modules,
fan modules, and
communication channels
between the active and
standby EH1D200CMU00
cards.
Dimensions (W x D x H):
112.9 mm x 412.7 mm x
19.8 mm
Weight: 0.22 kg
Maximum power
consumption: 1 W
EH1D2PS00P00
Open Service
Platform Unit
Processes and forwards
service data
Provides certain functions
using specific operating
system and application
software
Supports intrusion
prevention system (IPS)
software
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 5.50 kg
Maximum power
consumption: 137.5 W
ET1D2G24SEC0
Provides twenty-four GE
optical ports for data
transmission and linespeed switching.
Performs concurrent
data forwarding using a
24-port
distributed data plane
100/1000BASE-X
Eight queues on each port
interface card (EC,
Priority queuing (PQ),
SFP)-128K MAC
weighted round robin
(WRR), deficit round robin
(DRR), PQ+WRR, and
PQ+DRR
Buffer: 4 MB
Hot swap
Subcard on
EH1D2VS08000
the SFU
CMU
OSP
LPU
EH1D200CMU00
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.66 kg
Maximum power
consumption: 63 W
Huawei Enterprise Sx700 Series Switch Product
4
Card Type
Card Name
Card Description
ET1D2G48TEA0
48-port 10/100/
1000BASE-T
interface card (EA,
RJ45)-32K MAC
ET1D2G48TEC0
ET1D2G48SEA0
LPU
ET1D2G48SEC0
ET1D2T36SEA0
5
Huawei Enterprise Sx700 Series Switch Product
Functions and Features
Specifications
Provides forty-eight GE
electrical ports for data
transmission and linespeed switching.
Performs concurrent
data forwarding using a
48-port 10/100/ distributed data plane
Eight queues on each port
1000BASE-T
interface card (EC, PQ, WRR, DRR, PQ+WRR,
RJ45)-128K MAC and PQ+DRR
Buffer: 4 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight:
ET1D2G48TEA0: 2.50 kg
ET1D2G48TEC0: 2.66 kg
Maximum power
consumption:
ET1D2G48TEA0: 62 W
ET1D2G48TEC0: 68 W
Provides forty-eight GE
optical ports for data
transmission and linespeed switching.
Performs concurrent
data forwarding using a
distributed data plane
48-port
100/1000BASE-X Eight queues on each port
interface card (EC, PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
SFP)-128K MAC
Buffer: 4 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight:
ET1D2G48SEA0: 2.54 kg
ET1D2G48SEC0: 2.66 kg
Maximum power
consumption:
ET1D2G48SEA0: 75 W
ET1D2G48SEC0: 92 W
Provides thirty-six
10M/100M/1000M
Ethernet electrical ports
and twelve 100M/1000M
12-port
Ethernet optical ports for
100/1000BASE-X
data transmission and lineand 36speed switching.
port 10/100/
Performs concurrent
1000BASE-T
data forwarding using a
interface card (EA,
distributed data plane
RJ45/SFP)-32K
Eight queues on each port
MAC
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 4 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.50 kg
Maximum power
consumption: 62 W
48-port
100/1000BASE-X
interface card (EA,
SFP)-32K MAC
Card Type
Card Name
ET1D2X04XEA0
ET1D2X04XEC1
LPU
Card Description
Functions and Features
4-port 10GBASE-X
interface card (EA, Provides four 10GE optical
XFP)-32K MAC
ports for data transmission
and line-speed switching.
Performs concurrent
data forwarding using a
distributed data plane
4-port 10GBASE-X Eight queues on each port
interface card (EC, PQ, WRR, DRR, PQ+WRR,
XFP)-128K MAC
and PQ+DRR
Buffer: 4 MB
Hot swap
Specifications
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight:
ET1D2X04XEA0: 2.16 kg
ET1D2X04XEC1: 2.28 kg
Maximum power
consumption:
ET1D2X04XEA0: 64 W
ET1D2X04XEC1: 75 W
MAC address table size
ET1D2X04XEA0: 32K
ET1D2X04XEC1: 128K
ET1D2X12SSA0
Provides twelve 10GE
optical ports for data
transmission and linespeed switching.
Performs concurrent
12-port
data forwarding using a
10GBASE-X
distributed data plane
interface card (SA,
Eight queues on each port
SFP+)-32K MAC
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
LAN/WAN switchover
Buffer: 2 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.30 kg
Maximum power
consumption: 85 W
ET1D2X16SSC0
Provides sixteen 10GE
BASE-X optical ports for
data transmission and linespeed switching.
Performs concurrent
16-port
data forwarding using a
10GBASE-X
interface card (SC, distributed data plane
SFP+)-128K MAC Eight queues on each port
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 9 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.60 kg
Maximum power
consumption: 150 W
Huawei Enterprise Sx700 Series Switch Product
6
Card Type
Card Name
Card Description
ET1D2X16SSC2
Provides sixteen 10GE
optical ports for data
transmission and linespeed switching.
Performs concurrent
16-port
data forwarding using a
10GBASE-X
interface card (SC, distributed data plane
SFP+)-128K MAC Eight queues on each port
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 9 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.80 kg
Maximum power
consumption: 131 W
ET1D2X32SSC0
Provides thirty-two 10GE
optical ports for data
transmission and linespeed switching.
Performs concurrent
32-port
data forwarding using a
10GBASE-X
interface card (SC, distributed data plane
SFP+)-128K MAC Eight queues on each port
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 9 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 3.02 kg
Maximum power
consumption: 207 W
ET1D2L02QSC0
Provides two 40GE optical
ports for data transmission
and line-speed switching.
Allows a 40GE port to split
into four 10GE ports.
Performs concurrent
2-port 40GBASE-X data forwarding using a
distributed data plane
interface card
(SC, QSFP+)-128K Eight queues on each port
PQ, WRR, DRR, PQ+WRR,
MAC
and PQ+DRR
Service port clustering
Buffer: 9 MB
Software feature: service
port clustering
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.50 kg
Maximum power
consumption: 88 W
LPU
7
Huawei Enterprise Sx700 Series Switch Product
Functions and Features
Specifications
Card Type
Card Name
Card Description
ET1D2L08QSC0
Provides eight 40GE
optical ports for data
transmission and linespeed switching.
Allows a 40GE port to split
8-port 40GBASE-X into four 10GE ports.
Performs concurrent
interface card
(SC, QSFP+)-128K data forwarding using a
distributed data plane
MAC
Eight queues on each port
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 9 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.80 kg
Maximum power
consumption: 157.2 W
ET1D2G48TX1E
48-port 10/100/
1000BASE-T
interface card
(X1E, RJ45)
Provides forty-eight GE
electrical ports for data
access and line-speed
switching.
Forwarding speed: 48
Gbit/s
Performs concurrent
data forwarding using a
distributed data plane
Eight queues on each port
PQ, DRR, and PQ+DRR
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.92 kg
Maximum power
consumption: 120 W
48-port
100/1000BASE-X
interface card
(X1E SFP)
Provides forty-eight GE
optical ports for data
access and line-speed
switching.
Forwarding speed: 48
Gbit/s
Performs concurrent
data forwarding using a
distributed data plane
Eight queues on each port
PQ, DRR, and PQ+DRR
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 3.04 kg
Maximum power
consumption: 140 W
LPU
ET1D2G48SX1E
Functions and Features
Specifications
Huawei Enterprise Sx700 Series Switch Product
8
Card Type
Card Name
Card Description
ET1D2S04SX1E
Provides four 10G Ethernet
optical ports, sixteen
100/1000M Ethernet
optical ports, and eight
10/100/1000M combo
4-port 10GBASE-X
ports for data access and
and 24-port
line-speed switching.
100/1000BASE-X
Forwarding speed: 64
and 8-port
Gbit/s
10/100/
Performs concurrent
1000BASE-T
data forwarding using a
combo interface
distributed data plane
card (X1E, RJ45/
Eight queues on each port
SFP/SFP+)
LAN/WAN switchover
PQ, DRR, and PQ+DRR
Software feature: LAN/
WAN switching
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.88 kg
Maximum power
consumption: 130 W
ET1D2S08SX1E
Provides eight 10GBASE-X
ports and eight
8-port 10GBASE-X 10/100/1000M combo
ports for data access and
and 8-port
100/1000BASE-X line-speed switching.
Forwarding speed: 88
and 8-port
Gbit/s
10/100/
Performs concurrent
1000BASE-T
combo interface data forwarding using a
card (X1E, RJ45/ distributed data plane
Eight queues on each port
SFP/SFP+)
PQ, DRR, and PQ+DRR
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 2.84 kg
Maximum power
consumption: 130 W
ET1D2X48SEC0
Provides forty-eight
1000M/10G BASE-X ports
for data access and linespeed switching.
Performs concurrent
48-port
data forwarding using a
10GBASE-X
interface card (EC, distributed data plane
Eight queues on each port
SFP+)
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 9 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 3.42 kg
Maximum power
consumption: 300 W
LPU
9
Huawei Enterprise Sx700 Series Switch Product
Functions and Features
Specifications
Card Type
Card Name
Card Description
Functions and Features
Specifications
ET1D2C02FEE0
Provides two 100GE
optical ports for data
transmission and linespeed switching.
Performs concurrent
2-port
data forwarding using a
100GBASE-X
interface card (EE, distributed data plane
CFP)-688K MAC Eight queues on each port
PQ, WRR, DRR, PQ+WRR,
and PQ+DRR
Buffer: 5 MB
Hot swap
Dimensions (W x D x H):
394.7 mm x 426.8 mm x
35.1 mm
Weight: 4.20 kg
Maximum power
consumption: 339 W
Number of managed APs:
Central AP: 256
Common AP and RRU:
2048
Number of MAC address
entries: 32K
Number of routing entries:
16K
Number of ARP entries:
48K
Number of ESSIDs: 8K
Board dimensions: 35.56
mm x 380.00 mm x
378.45 mm (height x
width x depth)
Maximum power
consumption: 168 W
Board weight: 3.2 kg
ACU2
WLAN ACU2
Access Controller
Unit (128 AP
Control Resource
Included)
ET1D2FW00S00
NGFW Module A,
NOTE:
NOTE:
with HW General
For details, see the NGFW For details, see the NGFW
Security Platform
Module Hardware Guide. Module Hardware Guide.
Software
ET1D2FW00S01
NGFW Module B,
NOTE:
NOTE:
with HW General
For details, see the NGFW For details, see the NGFW
Security Platform
Module Hardware Guide. Module Hardware Guide.
Software
ET1D2FW00S02
NGFW Module C,
NOTE:
NOTE:
with HW General
For details, see the NGFW For details, see the NGFW
Security Platform
Module Hardware Guide. Module Hardware Guide.
Software
ET1D2IPS0S00
IPS Module A,
with HW General
Security Platform
Software
LPU
NOTE:
For details, see the IPS
Module Hardware Guide.
NOTE:
For details, see the IPS
Module Hardware Guide.
Huawei Enterprise Sx700 Series Switch Product
10
NOTE:
Interface cards consist of S series, E series, and X1E series interface cards:
• The S series includes SA and SC, interface cards, for example, 12-port 10GBASE-X interface card (SA,
SFP+).
• The E series includes EA, EC and EE interface cards, for example, 48-port 100M BASE-X optical interface
card (EA, SFP).
• The X1E series interface cards, for example, 48-Port 10/100/1000BASE-T Interface Card (X1E, RJ45).
3 Power Supply
Table 3-1 lists power supplies supported by the S12700.
Table 3-1 Power supplies supported by the S12700
Device Model
Supporting PoE
1600 W DC
2200 W DC
800 W AC
2200 W AC
S12700
N
N
Y
S12704:Y
S12708/S12712:N
Y
The S12704 provides slots PWR1 to PWR4 for power modules. The S12708 provides slots PWR1 to PWR6
for power modules. The S12712 provides slots PWR1 to PWR6 for power modules.
AC and DC power modules cannot be used in the same chassis.
The S12700 series switches support three redundancy modes of power modules: N+N, N+1, and N+0. The
value of N depends on the maximum power actually required by the system. Ensure that the total maximum
output power of N power modules (N x maximum output power of each power module) is larger than the
maximum power actually required by the system.
For example, the maximum power required by the system is 4000 W. If two 2200 W power modules are
installed in the chassis, they work in 2+0 mode. If three 2200 W power modules are installed, they work in
2+1 redundancy mode. If four 2200 W power modules are installed, they work in 2+2 redundancy mode.
The system can identify the power redundancy mode, and you do not need to manually configure the power
redundancy mode.
11
Huawei Enterprise Sx700 Series Switch Product
2200 W DC Power Module
A 2200 W DC power module adopts a 3 U high standard structure.
Figure 3-1 2200 W DC power module
Table 3-2 Technical specifications of a 2200 W DC power module
Item
Value
Dimensions (W x D x H)
41 mm x 393 mm x 130 mm
Weight
< 2.5 kg
Input
Rated input voltage
-48 V DC/-60 V DC
Input voltage range
-40 V DC to -72 V DC
Maximum input current
60 A
Maximum output current
42 A
Maximum output power
2200 W
Output
Hot swap
Supported
Environment parameters
Operating temperature: 0℃ to 45℃
Operating relative humidity: 5% RH to 95% RH
(noncondensing)
Storage temperature: -40℃ to +70℃
Storage relative humidity: 5% RH to 95% RH
(noncondensing)
Huawei Enterprise Sx700 Series Switch Product
12
800 W AC Power Module
An 800 W AC power module adopts a 3 U high standard structure.
Figure 3-2 800 W DC power module
Table 3-3 Technical specifications of a 880 W AC power module
Item
Value
Dimensions (W x D x H)
41 mm x 393 mm x 130 mm
Weight
< 2.5 kg
Rated input voltage
220 V AC/110 V AC; 50/60 Hz
Rated input voltage range
200 V AC to 240 V AC (220 V AC input)/100 V AC to 120 V
AC (110 V AC input); 47 Hz to 63 Hz
Maximum input voltage
range
90 V AC to 290 V AC; 47 Hz to 63 Hz (When the input
voltage is in the range of 90 V AC to 175 V AC, the power
module provides up to half of the maximum output power.)
Maximum input current
5A
Maximum output current
15 A (220 V AC input)/7.5 A (110 V AC input)
Maximum output power
800 W (220 V AC input)/400 W (110 V AC input)
Input
Output
13
Hot swap
Supported
Environment parameters
Operating temperature: 0℃ to 45℃
Operating relative humidity: 5% RH to 95% RH
(noncondensing)
Storage temperature: -40℃ to +70℃
Storage relative humidity: 5% RH to 95% RH
(noncondensing
Huawei Enterprise Sx700 Series Switch Product
2200 W AC Power Module
A 2200 W AC power module adopts a 3 U high standard structure.
Figure 3-3 2200 W AC power module
Table 3-4 Technical specifications of a 2200 W AC power module
Item
Value
Dimensions (W x D x H)
41 mm x 393 mm x 130 mm
Weight
< 2.5 kg
Rated input voltage
220 V AC/110 V AC; 50/60 Hz
Rated input voltage range
200 V AC to 240 V AC (220 V AC input)/100 V AC to 120 V
AC (110 V AC input); 47 Hz to 63 Hz
Maximum input voltage
range
90 V AC to 290 V AC; 47 Hz to 63 Hz (The maximum
output power reduces by a half when the input voltage is in
the range of 90 V AC to 175 V AC.)
Maximum input current
15.5 A
Maximum output current
42 A (220 V AC input)/21 A (110 V AC Input)
Maximum output power
2200 W (220 V AC input)/1100 W (110 V AC input)
Input
Output
Hot swap
Supported
Environment parameters
Operating temperature: 0℃ to 45℃
Operating relative humidity: 5% RH to 95% RH
(noncondensing)
Storage temperature: -40℃ to +70℃
Storage relative humidity: 5% RH to 95% RH
(noncondensing)
Huawei Enterprise Sx700 Series Switch Product
14
4 Product Characteristics
Make Your Network Agile and Service-Oriented
The high-speed ENP chip used in the S12700 series is tailored for Ethernet. The chip's flexible packet
processing and traffic control capabilities can meet current and future service requirements, helping build a
highly scalable network.
In addition to providing all the capabilities of common switches, the S12700 series provides fully
programmable open interfaces and supports programmable forwarding behaviors. Enterprises can use the
open interfaces to develop new protocols and functions independently, or jointly with other vendors, to
build campus networks that meet their needs.
The ENP chip uses a fully programmable architecture, on which enterprises can define their own forwarding
models, forwarding behaviors, and lookup algorithms. This architecture speeds service innovation and
enables the provisioning of a customized service within six months, without replacing hardware. In contrast,
traditional Application Specific Integrated Circuit (ASIC) chips use a fixed forwarding architecture and follow
a fixed forwarding process. For this reason, new services cannot be provisioned until new hardware is
developed to support the services, which can take one to three years.
Deliver Abundant Services Agilely
The S12700 series' native AC capabilities allow enterprises to build a wireless network without additional AC
hardware. Each S12700 switch can manage up to 6,144 APs and 65,536 users. It is the first core switch that
provides T-bit AC capabilities, avoiding the performance bottleneck on independent AC devices. The native
T-bit AC capabilities help organizations better cope with challenges in the high-speed wireless era.
The S12700 series' unified user management function authenticates both wired and wireless users, ensuring
a consistent user experience no matter whether they are connected to the network through wired or
wireless access devices. The unified user management function supports various authentication methods,
including 802.1x, MAC address, and Portal authentication, and is capable of managing users based on user
groups, domains, and time ranges. These functions control user and service management and enable the
transformation from device-centered management to user-centered management.
The S12700 series' Service Chain function can virtualize value-added service capabilities, such as nextgeneration firewall. Then these capabilities can be used by campus network entities (such as switches,
routers, AC, AP, and terminals), regardless of their physical locations. Service Chain provides a more flexible
value-added service deployment solution, which reduces equipment investment and maintenance costs.
Provide Agile Fine Granular Management
Packet Conservation Algorithm for Internet (iPCA) changes the traditional method that uses simulated traffic
for fault location. iPCA technology monitors network quality for any service flow at any network node, at
any time, and without extra costs. It can detect temporary service interruptions within one second and can
identify faulty ports accurately. This cutting-edge fault detection technology turns "extensive management"
into "fine granular management."
Super Virtual Fabric 2.0 (SVF 2.0) technology can not only virtualize fixed-configuration switches into S12700
switch line cards but also virtualize APs as switch ports. With this virtualization technology, a physical
network with core/aggregation switches, access switches, and APs can be virtualized into a "super switch",
offering the simplest network management solution.
15
Huawei Enterprise Sx700 Series Switch Product
Industry-leading Line cards
Using Huawei’s advanced ENP chips, the S12700 series supports several million hardware entries, leaving
traditional switches far behind. The S12700 series provides 1M MAC address entries and 3M Forwarding
Information Base (FIB) entries, meeting requirements of route-intensive scenarios, such as the Metropolitan
Area Network (MAN) for a television broadcasting or education network. Providing 1M NetStream entries
enables fine granular traffic statistics for college campus networks and large-scale enterprise campus
networks.
The S12700 series provides large buffer on line card to prevent packet loss upon traffic bursts, delivering
high-quality video services.
The S12700 series supports high-density line-speed cards, such as 48 x 10 GE and 8 x 40G cards. Each
S12700 chassis can provide a maximum of 576 x 10 GE ports and 96 x40G ports. This large port capacity
fully meets the requirements of bandwidth-consuming applications, such as multimedia video conferencing,
protecting customer investments.
End-to-End Reliability Design
Device-Level Reliability: CSS2 Switch Fabric Hardware Clustering Technology
Based on back-to-back clustering technology, widely used on high-end core routers, the S12700 series
employs second-generation switching fabric hardware clustering technology, CSS2, an enhancement to CSS
switching fabric clustering technology.
CSS2 technology connects cluster member switches through switch fabric unit hardware channels; therefore,
cluster control and data packets need only be forwarded once by the switch fabric units and do not go
through service cards. Compared with traditional service port clustering technologies, CSS2 minimizes the
impact of software failures, reduces service interruption risks caused by service cards, and also significantly
shortens transmission latency.
CSS2 supports 1+N backup of MPUs. This means a cluster can run stably as long as one MPU of any chassis
in the cluster is working normally. In a cluster connected by service ports, each chassis must have at least one
MPU working normally; therefore, CSS2 is more reliable than traditional service port clustering technologies.
Network-Level Reliability: End-to-End Hardware Protection Switching
The S12700 uses a series of link detection and protection switching technologies, such as hardware EthOAM, BFD, G.8032, and Smart Ethernet Protection (SEP), to realize end-to-end protection switching. These
technologies help build a campus network that responds quickly to topology changes and provides the most
reliable services.
The S12700 supports High-speed Self Recovery (HSR) technology. Using Huawei's ENP cards, the S12700
implements end-to-end IP MPLS bearer network protection switchover within 50 ms, improving network
reliability .
Comprehensive Security Measures
The S12700 supports MAC security (MACSec) that enables hop-by-hop secure data transmission. Therefore,
the S12700 can be applied to scenarios that pose high requirements on data confidentiality, such as
government and finance sectors .
Huawei Enterprise Sx700 Series Switch Product
16
NGFW is a next-generation firewall card that can be installed on an S12700. In addition to the traditional
defense functions such as firewall, identity authentication, and Anti-DDoS, the NGFW supports IPS, antispam, web security, and application control functions.
The S12700 provides innovative next-generation environment awareness and access control. It identifies the
application-layer attacks and protects network-layer applications based on application type, content, time,
user, threaten, and location.
The dedicated software and hardware platforms provide an Intelligent Aware Engine (IAE) to perceive
application information when all security functions are enabled. The built-in hardware accelerator for
content detection improves application-layer protection efficiency and ensures the 10G+ performance when
all security functions are enabled.
5 Product Specifications
5.1 Product Specifications
Table 5-1 Product specifications of the S12700
Item
S12704
S12708
S12712
Switching
capacity
4.88/10.96 Tbit/s
12.32/27.04 Tbit/s
17.44/37.28 Tbit/s
Packet
forwarding rate
3120/4560 Mpps
6240/9120 Mpps
9120/12960 Mpps
Redundancy
design
MPUs, SFUs, power supplies, and fan modules
1+N backup of MPUs in a cluster
CSS2
Up to 1.92 Tbit/s cluster bandwidth, 4 μs inter-chassis transmission latency
Native AC
Wireless
network
management
AP access control, AP region management, and AP profile management
Radio profile management, uniform static configuration, and centralized dynamic
management
Basic WLAN services, QoS, security, and user management
Unified user management
User
management
802.1X, MAC, and Portal authentication
Traffic- and time-based accounting
User authorization based on user groups, domains, and time ranges
iPCA quality
awareness
Marking real service packets to obtain real-time count of dropped packets and packet loss
ratio
Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks
17
Huawei Enterprise Sx700 Series Switch Product
Item
S12704
S12708
S12712
Up to 4K clients (access switches and APs) virtualized into a single device
SVF 2.0
virtualization
Two layers of ASs allowed in an SVF system
Third-party devices allowed between SVF parent and clients
Access, trunk, and hybrid interface types, auto-negotiation of LNP links
Default VLAN
VLAN
VLAN switching
QinQ and selective QinQ
MAC address-based VLAN assignment
ARP
Up to 256K ARP entries
1M MAC address entries
Dynamic MAC address learning and aging
MAC address
Static, dynamic, and blackhole MAC address entries
Source MAC address filtering
MAC address limiting based on ports and VLANs
Spanning Tree Protocol (STP) (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
SEP
Ring network
protection
Bridge Protocol Data Unit (BPDU), root protection, and loop protection
BPDU tunnel
G.8032 Ethernet Ring Protection Switching (ERPS)
3M IPv4 routing entries
IP routing
512K IPv6 routing entries
IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
128,000 multicast routing entries
IGMPv1/v2/v3 and IGMP v1/v2/v3 snooping
PIM-DM, PIM-SM, and PIM-SSM
Multicast Source Discovery Protocol (MSDP) and Multiprotocol Extensions for BGP (MBGP)
Multicast
Fast leave
Multicast traffic control
Multicast querier
Multicast protocol packet suppression
Multicast Call Admission Control (CAC)
Multicast ACL
Huawei Enterprise Sx700 Series Switch Product
18
Item
S12704
S12708
S12712
Basic MPLS functions
MPLS Operations, Administration, and Maintenance (OAM)
MPLS
MPLS Traffic Engineering (TE)
MPLS VPN/VLL/VPLS
Link Aggregation Control Protocol (LACP) and E-Trunk
Virtual Router Redundancy Protocol (VRRP) and Bidirectional Forwarding Detection (BFD)
for VRRP
BFD for BGP/IS-IS/OSPF/static route
Non-Stop Forwarding (NSF) and Graceful Restart (GR) for BGP/IS-IS/OSPF/LDP
TE Fast ReRoute (FRR) and IP FRR
Eth-OAM 802.3ah and 802.1ag (hardware-based )
HSR
Reliability and
availability
ITU-Y.1731
Device Link Detection Protocol (DLDP)
• S12704
Mean Time Between Failures (MTBF): 40.65 years
Mean time to repair (MTTR): 35 minutes
Availability: 0.999998837
• S12708
Mean Time Between Failures (MTBF): 40.04 years
Mean time to repair (MTTR): 36 minutes
Availability: 0.9999984
• S12712
Mean Time Between Failures (MTBF): 35.95 years
Mean time to repair (MTTR): 35 minutes
Availability: 0.9999981
256K ACLs
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and
802.1p priority
ACLs and actions such as Committed Access Rate (CAR), re-marking, and scheduling
QoS
Queuing algorithms, such as SP, WRR, DRR, SP + WRR, and SP + DRR
Congestion avoidance mechanisms, including (WRED) and tail drop
H-QoS
Traffic shaping
19
Huawei Enterprise Sx700 Series Switch Product
Item
S12704
S12708
S12712
Terminal access services such as console port login, Telnet, and SSH
Network management protocols, such as SNMPv1/v2/v3
Configuration
and
maintenance
File uploading and downloading through FTP and TFTP
BootROM upgrade and remote in-service upgrade
Hot patches
User operation logs
MAC address, Portal, 802.1x, and Dynamic Host Configuration Protocol (DHCP) snooping
triggered authentication
MACsec
RADIUS and HWTACACS authentication for login users
Security and
management
Command line authority control based on user levels, preventing unauthorized users from
using command configurations
Defense against DoS attacks, Transmission Control Protocol (TCP) SYN Flood attacks, User
Datagram Protocol (UDP) Flood attacks, broadcast storms, and heavy traffic attacks
Remote Network Monitoring (RMON)
Firewall
Network Address Translation (NAT)
Security
protection *
IPSec, SSL VPN
Intrusion Protection System (IPS)
Load balancing Analog Digital Conversion (ADC)
Energy saving
Energy Efficient Ethernet (802.3az)
Operating temperature and altitude:
– -60 m to +1800 m: 0℃ to 45℃
Environment
parameters
Noise under
normal
temperature
(sound power)
– 1800 m to 4000 m: Temperature decreases by 1℃ every time the altitude increases
220 m.
– 4000 m: 0℃ to 35℃
Operating relative humidity: 5% RH to 95% RH (noncondensing)
Storage temperature: -40℃ to +70℃
Storage altitude: < 5000 m
Storage relative humidity: 5% RH to 95% RH (noncondensing)
S12704: ≤ 77.8 dBA
S12708: ≤ 72 dBA
S12712: ≤ 77.9 dBA
Huawei Enterprise Sx700 Series Switch Product
20
Item
S12704
S12708
S12712
CISPR22 Class A
CISPR24
EN55022 Class A
EN50024
ETSI EN 300 386 Class A
Electromagnetic
CFR 47 FCC Part 15 Class A
Compatibility
ICES 003 Class A
(EMC)
AS/NZS CISPR22 Class A
VCCI Class A
IEC61000-6-2
IEC61000-6-4
IEC61000-4-2
Environmental
standards
compliance
RoHS
REACH
WEEE
IEC 60950-1
EN 60950-1
Safety standards UL 60950-1
CSA C22.2 No 60950-1
compliance
AS/NZS 60950.1
BS EN 60950-1
*: The S12700 supports the NGFW, which is the next-generation firewall card, and the IPS card. For more
specification information, see the brochures of the cards.
6 Product Application
In an enterprise campus network
S12700 series switches are deployed on the core layer of an enterprise campus network. Native ACs
provided by the S12700 enable customers to build wireless networks without additional AC hardware,
reducing network construction costs. The S12700 is the first core switch that provides T-bit AC capabilities,
avoiding the performance bottleneck on independent ACs. The native T-bit AC capabilities help customers
migrate their wireless networks to 802.11ac. The S12700 series realizes wired and wireless convergence
and delivers consistent experience to wired and wireless users through uniform device, user, and service
management.
In a college campus network
S12700 series switches are deployed on the core layer of a college campus network. The unified user
management function on the S12700 reduces network construction costs by removing the need to
purchase new BRAS hardware. Each S12700 switch supports up to 65,536 users, allowing a large number
of concurrent access users. Its H-QoS feature implements fine granular user and service management. The
S12700 series realizes wired and wireless convergence and delivers consistent experience to wired and
wireless users through uniform device, user, and service management.
21
Huawei Enterprise Sx700 Series Switch Product
In a bearer network for video conferencing, desktop cloud, and video surveillance applications
The Large buffer prevents packet loss upon traffic bursts, delivering high-quality video streams. The S12700
series supports up to 1M MAC address entries and 3M FIB entries, which allow access from a large number
of terminals and help evolution to IPv6 and the Internet of Things (IoT). Employing end-to-end hardware
reliability technologies and iPCA technology, the S12700 series offers a highly reliable, high-quality, scalable
video conferencing and surveillance solution.
On the core/aggregation layer of a MAN
S12700 series switches are used as core or aggregation switches on the Metropolitan Area Network (MAN)
of a television broadcasting or education network. The 3M FIB entries provided are sufficient for largescale routing on the MAN. CSS2 switch fabric hardware clustering technology, originating from clustering
technology for high-end core routers, delivers carrier-class reliability on the MAN. Additionally, the S12700
series supports comprehensive L2/L3 MPLS VPN features, providing a highly reliable, secure, and scalable
metropolitan bearer network solution.
In an enterprise data center
S12700 series switches are deployed on the core or aggregation layer of an enterprise data center network.
The S12700 series has high-density line cards, such as 48 x 10 GE cards, meeting the requirements for large
data throughput on data center core/aggregation nodes. Using CSS2 switch fabric hardware clustering
technology, the S12700 series provides up to 1.92 Tbit/s cluster bandwidth and shortens the inter-chassis
forwarding latency to 4 μs. This technology helps customers build a high performance, high reliability, and
low latency data center network.
For more information, visit http://enterprise.huawei.com or contact your local Huawei sales office.
7 Safety and Regulatory Compliance
Table 8-1 lists the safety and regulatory compliance of S12700.
Table 7-1 S12700 safety and regulatory compliance
Certification Category
Description
Safety
IEC 60950-1
EN 60950-1
UL 60950-1
CSA C22.2 No 60950-1
AS/NZS 60950.1
BS EN 60950-1
CNS 14336-1
Huawei Enterprise Sx700 Series Switch Product
22
Certification Category
Description
Electromagnetic Compatibility (EMC)
CISPR22 Class A
CISPR24
EN55022 Class A
EN55024
ETSI EN 300 386 Class A
CFR 47 FCC Part 15 Class A
ICES 003 Class A
AS/NZS CISPR22 Class A
VCCI Class A
IEC61000-6-2
IEC61000-6-4
IEC61000-4-2
ITU-T K 20
ITU-T K 21
ITU-T K 44
CNS13438
Environment
RoHS
REACH
WEEE
Laser safety
IEC60825-1, IEC60825-2, EN60825-1, EN60825-2
NOTE:
• EMC: electromagnetic compatibility
• CISPR: International Special Committee on Radio Interference
• EN: European Standard
• ETSI: European Telecommunications Standards Institute
• CFR: Code of Federal Regulations
• FCC: Federal Communication Commission
• IEC: International Electrotechnical Commission
• AS/NZS: Australian/New Zealand Standard
• VCCI: Voluntary Control Council for Interference
• UL: Underwriters Laboratories
• CSA: Canadian Standards Association
• IEEE: Institute of Electrical and Electronics Engineers
• RoHS: restriction of the use of certain hazardous substances
• REACH: Registration Evaluation Authorization and Restriction of Chemicals
• WEEE: Waste Electrical and Electronic Equipment
23
Huawei Enterprise Sx700 Series Switch Product
8 MIB Compliance
8.1 Supported MIBs
Table 9-1 lists the MIBs supported by S12700.
Table 8-1 S12700 MIBs
Category
MIB
Public MIB
BGP4-MIB
BRIDGE-MIB
DISMAN-NSLOOKUP-MIB
DISMAN-PING-MIB
DISMAN-TRACEROUTE-MIB
ENTITY-MIB
EtherLike-MIB
IF-MIB
IP-FORWARD-MIB
IPMCAST-MIB
IPv6-ICMP-MIB
IPv6-MIB
IPv6-TCP-MIB
IPv6-UDP-MIB
ISIS-MIB
LAG-MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
MGMD-STD-MIB
MPLS-FTN-STD-MIB
MPLS-L3VPN-STD-MIB
MPLS-LDP-GENERIC-STD-MIB
MPLS-LDP-STD-MIB
MPLS-LSR-STD-MIB
MPLS-TE-STD-MIB
MSDP-MIB
NOTIFICATION-LOG-MIB
NQA-MIB
OSPF-MIB
OSPF-TRAP-MIB
P-BRIDGE-MIB
PIM-BSR-MIB
PIM-STD-MIB
Q-BRIDGE-MIB
RFC1213-MIB
RIPv2-MIB
RMON2-MIB
RMON-MIB
SAVI-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMP-USER-BASED-SM-MIB
SNMPv2-MIB
SNMP-VIEW-BASED-ACM-MIB
TCP-MIB
UDP-MIB
VRRP-MIB
VRRPv3-MIB
Huaweiproprietary
MIB
HUAWEI-AAA-MIB
HUAWEI-ACL-MIB
HUAWEI-ALARM-MIB
HUAWEI-ALARM-RELIABILITY-MIB
HUAWEI-BASE-TRAP-MIB
HUAWEI-BFD-MIB
HUAWEI-BGP-VPN-MIB
HUAWEI-BRAS-RADIUS-MIB
HUAWEI-BRAS-SRVCFG-EAP-MIB
HUAWEI-BRAS-SRVCFG-STATICUSER-MIB
HUAWEI-BULKSTAT-MIB
HUAWEI-CBQOS-MIB
HUAWEI-CCC-MIB
HUAWEI-CONFIG-MAN-MIB
HUAWEI-CLOCK-MIB
HUAWEI-CPU-MIB
HUAWEI-DAD-MIB
HUAWEI-DC-TRAP-MIB
HUAWEI-DATASYNC-MIB
HUAWEI-DEVICE-MIB
HUAWEI-DHCPR-MIB
HUAWEI-DHCPS-MIB
HUAWEI-DHCP-SNOOPING-MIB
HUAWEI-DIE-MIB
HUAWEI-DNS-MIB
HUAWEI-DLDP-MIB
HUAWEI-ERPS-MIB
HUAWEI-ERRORDOWN-MIB
Huawei Enterprise Sx700 Series Switch Product
24
25
Category
MIB
Huaweiproprietary
MIB
HUAWEI-ENERGYMNGT-MIB
HUAWEI-EASY-OPERATION-MIB
HUAWEI-ENTITY-EXTENT-MIB
HUAWEI-ENTITY-TRAP-MIB
HUAWEI-ETHARP-MIB
HUAWEI-ETHOAM-MIB
HUAWEI-E-TRUNK-MIB
HUAWEI-FLASH-MAN-MIB
HUAWEI-FTP-MIB
HUAWEI-FWD-RES-TRAP-MIB
HUAWEI-GARP-APP-MIB
HUAWEI-GTL-MIB
HUAWEI-GTSM-MIB
HUAWEI-HGMP-MIB
HUAWEI-HQOS-MIB
HUAWEI-HWTACACS-MIB
HUAWEI-IF-EXT-MIB
HUAWEI-INFOCENTER-MIB
HUAWEI-IPFPM-MIB
HUAWEI-IPLPM-MIB
HUAWEI-IPMCAST-MIB
HUAWEI-IPPOOL-MIB
HUAWEI-IPSESSION-MIB
HUAWEI-IPV6-MIB
HUAWEI-ISOLATE-MIB
HUAWEI-KOMPELLA-MIB
HUAWEI-L2IF-MIB
HUAWEI-L2MAM-MIB
HUAWEI-L2MULTICAST-MIB
HUAWEI-L2VLAN-MIB
HUAWEI-L2VPN-MIB
HUAWEI-LDT-MIB
HUAWEI-LSP-PING-TRACE-TRAP-MIB
HUAWEI-LINE-MIB
HUAWEI-LLDP-MIB
HUAWEI-MAC-AUTHEN-MIB
HUAWEI-MDNS-RELAY-MIB
HUAWEI-MEMORY-MIB
HUAWEI-MFF-MIB
HUAWEI-MFLP-MIB
HUAWEI-MGMD-STD-MIB
HUAWEI-MPLS-EXTEND-MIB
HUAWEI-MPLSLDP-MIB
HUAWEI-MPLSLSR-EXT-MIB
HUAWEI-MPLSOAM-MIB
HUAWEI-MSDP-MIB
HUAWEI-MSTP-MIB
HUAWEI-MULTICAST-MIB
Huawei Enterprise Sx700 Series Switch Product
HUAWEI-NETSTREAM-MIB
HUAWEI-NTPV3-MIB
HUAWEI-OSPFV2-MIB
HUAWEI-OSPFV3-MIB
HUAWEI-PERFORMANCE-MIB
HUAWEI-PIM-BSR-MIB
HUAWEI-PIM-STD-MIB
HUAWEI-PERFMGMT-MIB
HUAWEI-PORT-MIB
HUAWEI-PORTAL-MIB
HUAWEI-PWE3-MIB
HUAWEI-PWE3-TNL-MIB
HUAWEI-QINQ-MIB
HUAWEI-RIPv2-EXT-MIB
HUAWEI-RM-EXT-MIB
HUAWEI-RRPP-MIB
HUAWEI-RSVPTE-MIB
HUAWEI-SECURITY-MIB
HUAWEI-SEP-MIB
HUAWEI-SMARTLINK-MIB
HUAWEI-SNMP-EXT-MIB
HUAWEI-SSH-MIB
HUAWEI-STACK-MIB
HUAWEI-SWITCH-L2MAM-EXT-MIB
HUAWEI-SWITCH-SRV-TRAP-MIB
HUAWEI-SYS-MAN-MIB
HUAWEI-TASK-MIB
HUAWEI-TCP-MIB
HUAWEI-TFTPC-MIB
HUAWEI-TRNG-MIB
HUAWEI-TUNNEL-MIB
HUAWEI-TUNNEL-TE-MIB
HUAWEI-UNIMNG-MIB
HUAWEI-USC-MIB
HUAWEI-VPLS-EXT-MIB
HUAWEI-VPLS-TNL-MIB
HUAWEI-VPN-DIAGNOSTICS-MIB
HUAWEI-VRRP-EXT-MIB
HUAWEI-WLAN-DEVICE-MIB
HUAWEI-WLAN-QOS-MIBB
HUAWEI-WLAN-RADIO-MIB
HUAWEI-WLAN-SECURITY-MIB
HUAWEI-WLAN-SERVICE-MIB
HUAWEI-WLAN-SYS-MIB
HUAWEI-WLAN-UPDATE-MIB
HUAWEI-WLAN-WIDS-MIB
HUAWEI-XQOS-MIB
8.2 Standard Compliance
Table 9-2 lists the standards the S12700 complies with.
Table 8-2 S12700 standards compliance
Standard
Organization
Standard or Protocol
IETF
RFC 768 User Datagram Protocol (UDP)
RFC 792 Internet Control Message Protocol (ICMP)
RFC 793 Transmission Control Protocol (TCP)
RFC 826 Ethernet Address Resolution Protocol (ARP)
RFC 854 Telnet Protocol Specification
RFC 951 Bootstrap Protocol (BOOTP)
RFC 959 File Transfer Protocol (FTP)
RFC 1058 Routing Information Protocol (RIP)
RFC 1112 Host extensions for IP multicasting
RFC 1157 A Simple Network Management Protocol (SNMP)
RFC 1256 ICMP Router Discovery
RFC 1305 Network Time Protocol Version 3 (NTP)
RFC 1349 Internet Protocol (IP)
RFC 1493 Definitions of Managed Objects for Bridges
RFC 1542 Clarifications and Extensions for the Bootstrap Protocol
RFC 1643 Ethernet Interface MIB
RFC 1757 Remote Network Monitoring (RMON)
RFC 1901 Introduction to Community-based SNMPv2
RFC 1902-1907 SNMP v2
RFC 1981 Path MTU Discovery for IP version 6
RFC 2131 Dynamic Host Configuration Protocol (DHCP)
RFC 2328 OSPF Version 2
RFC 2453 RIP Version 2
RFC 2460 Internet Protocol, Version 6 Specification (IPv6)
RFC 2461 Neighbor Discovery for IP Version 6 (IPv6)
RFC 2462 IPv6 Stateless Address Auto configuration
RFC 2463 Internet Control Message Protocol for IPv6 (ICMPv6)
RFC 2474 Differentiated Services Field (DS Field)
RFC 2740 OSPF for IPv6 (OSPFv3)
RFC 2863 The Interfaces Group MIB
RFC 2597 Assured Forwarding PHB Group
RFC 2598 An Expedited Forwarding PHB
RFC 2571 SNMP Management Frameworks
RFC 2865 Remote Authentication Dial In User Service (RADIUS)
RFC 3046 DHCP Option82
RFC 3376 Internet Group Management Protocol, Version 3 (IGMPv3)
RFC 3513 IP Version 6 Addressing Architecture
RFC 3579 RADIUS Support For EAP
RFC 4271 A Border Gateway Protocol 4 (BGP-4)
RFC 4760 Multiprotocol Extensions for BGP-4
draft-grant-tacacs-02 TACACS+
Huawei Enterprise Sx700 Series Switch Product
26
Standard
Organization
Standard or Protocol
IEEE
IEEE 802.1D Media Access Control (MAC) Bridges
IEEE 802.1p Virtual Bridged Local Area Networks
IEEE 802.1Q Virtual Bridged Local Area Networks
IEEE 802.1ad Provider Bridges
IEEE 802.2 Logical Link Control
IEEE Std 802.3 CSMA/CD
IEEE Std 802.3ab 1000BASE-T specification
IEEE Std 802.3ad Aggregation of Multiple Link Segments
IEEE Std 802.3ae 10GE WEN/LAN Standard
IEEE Std 802.3x Full Duplex and flow control
IEEE Std 802.3z Gigabit Ethernet Standard
IEEE802.1ax/IEEE802.3ad Link Aggregation
IEEE 802.3ah Ethernet in the First Mile.
IEEE 802.1ag Connectivity Fault Management
IEEE 802.1ab Link Layer Discovery Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE802.1x Port based network access control protocol
ITU
ITU SG13 Y.17ethoam
ITU SG13 QoS control Ethernet-Based IP Access
ITU-T Y.1730 ETH OAM performance monitor
ITU-T Y.1731 ETH OAM performance monitor
ITU-T Y.1710 Requirements for OAM functionality for MPLS networks
ITU-T Y.1711 Operation and maintenance mechanism for MPLS networks
ITU-T Y.1720 Protection switching for MPLS networks
ISO
ISO 10589
MEF
MEF 2 Requirements and Framework for Ethernet Service Protection
MEF 9 Abstract Test Suite for Ethernet Services at the UNI
MEF 10.2 Ethernet Services Attributes Phase 2
MEF 11 UNI Requirements and Framework
MEF 13 UNI Type 1 Implementation Agreement
MEF 15 Requirements for Management of Metro Ethernet Phase 1 Network Elements
MEF 17 Service OAM Framework and Requirements
MEF 20 UNI Type 2 Implementation Agreement
MEF 23 Class of Service Phase 1 Implementation Agreement
Xmodem XMODEM/YMODEM Protocol Reference
IS-IS Routing Protocol
NOTE:
The listed standards and protocols are fully or partially supported by Huawei switches. For details, see the
HUAWEI Sx700 Switch Standard and Protocol Compliance List or contact your local Huawei sales office.
27
Huawei Enterprise Sx700 Series Switch Product
9 Ordering Information
S12700 basic configuration
LE2BN66ED000
N66E DC assembly rack (eight 60A outputs, maximum 2,200W per output, 600 x
600 x 2,200 mm)
LE2BN66EA000
N66E AC assembly rack (four 16A outputs, maximum 2,500W per output, 600 x
600 x 2,200 mm)
ET1BS12704S0
S12704 Assembly Chassis
ET1BS12708S0
S12708 assembly chassis
ET1BS12712S0
S12712 assembly chassis
ET1MFBX00000
Wide Voltage 129 Fan Box
EH1M00FBX000
Wide Voltage 74 Fan Box
Monitoring unit
EH1D200CMU00
Centralized monitoring unit
Main processing unit
ET1D2MPUA000
S12700 main control unit A, optional clock
Switch fabric unit
ET1D2SFUA000
S12700 switch fabric unit A
ET1D2SFUC000
S12700 switch fabric unit C
ET1D2SFUD000
S12700 switch fabric unit D
100M/1000M Ethernet electrical interface cards
ET1D2G48TEA0
48-port 10/100/1000 BASE-T interface card (EA, RJ45)
ET1D2G48TEC0
48-port 10/100/1000 BASE-T interface card (EC, RJ45)
ET1D2G48TX1E
48-port 10/100/1000 BASE-T interface card (X1E, RJ45)*
100M/1000M Ethernet optical interface cards
ET1D2G24SEC0
24-port 100/1000 BASE-X interface card (EC, SFP)
ET1D2G48SEA0
48-port 100/1000 BASE-X interface card (EA, SFP)
ET1D2G48SEC0
48-port 100/1000 BASE-X interface card (EC, SFP)
ET1D2G48SX1E
48-port 100/1000 BASE-X interface card (X1E, SFP)
100M/1000M Ethernet electrical and optical interface cards
ET1D2T36SEA0
36-port 10/100/1000 BASE-T and 12-port 100/1000 BASE-X interface card (EA,
RJ45/SFP)
10 GE optical interface cards
ET1D2X04XEA0
4-port 10G BASE-X interface card (EA, XFP)
ET1D2X04XEC1
4-port 10G BASE-X interface card (EC, XFP)
ET1D2S04SX1E
4-port 10G BASE-X and 24-port 100/1000 BASE-X and 8-port 10/100/1000 BASE-T
combo interface card (X1E, RJ45/SFP/SFP+)
ET1D2S08SX1E
8-port 10G BASE-X and 8-port 100/1000 BASE-X and 8-port 10/100/1000 BASE-T
combo interface card (X1E, RJ45/SFP/SFP+)
ET1D2X12SSA0
12-port 10G BASE-X interface card (SA, SFP+)
ET1D2X16SSC0
16-port 10G BASE-X interface card (SC, SFP+)
ET1D2X16SSC2
16-Port 10GBASE-X Interface Card(SC,SFP+)
ET1D2S16SX2S
16-Port 10GE SFP+ Interface and 16-Port GE SFP Interface Card(X2S,SFP+)
ET1D2S16SX2E
16-Port 10GE SFP+ Interface and 16-Port GE SFP Interface Card(X2E,SFP+)
Huawei Enterprise Sx700 Series Switch Product
28
ET1D2S24SX2S
24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface Card(X2S,SFP+)
ET1D2S24SX2E
24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface Card(X2E,SFP+)
ET1D2X32SSC0
32-Port 10GBASE-X Interface Card(SC,SFP+)
ET1D2X32SX2S
32-Port 10GE SFP+ Interface Card(X2S,SFP+)
ET1D2X32SX2E
32-Port 10GE SFP+ Interface Card(X2E,SFP+)
ET1D2X32SX2H
32-Port 10GE SFP+ Interface Card(X2H,SFP+)
ET1D2X48SEC0
48-port 10G BASE-X interface card (EC, SFP+)
ET1D2X48SX2S
48-Port 10GE SFP+ Interface Card(X2S,SFP+)
40 GE optical interface cards
ET1D2L02QSC0
2-port 40G BASE-X interface card (SC, QSFP+)
ET1D2L08QSC0
8-port 40G BASE-X interface card (SC, QSFP+)
ET1D2L08QX2E
8-Port 40GE QSFP+ Interface Card(X2E,QSFP+)
10 GE and 40GE optical interface cards
ET1D2S16QSC0
16-port 10GBASE-X and 2-port 40Gbase-X interface card (SC, SFP+/QSFP+)
100GE optical interface cards
ET1D2C02FEE0
2-Port 100GBASE-X Interface Card(EE,CFP)
ET1D2C04HX2S
4-Port 100GE QSFP28 Interface Card(X2S,QSFP28)
ET1D2C04HX2E
4-Port 100GE QSFP28 Interface Card(X2E,QSFP28)
ET1D2C04HX2H
4-Port 100GE QSFP28 Interface Card(X2H,QSFP28)
40GE and 100GE optical interface cards
ET1D2H02QX2S
2-Port 100GE QSFP28 Interface and 2-Port 40GE QSFP+ Interface Card(X2S,QSFP28)
ET1D2H02QX2E
2-Port 100GE QSFP28 Interface and 2-Port 40GE QSFP+ Interface Card(X2E,QSFP28)
Cluster service subcard
EH1D2VS08000
8-port 10G cluster switching system service unit (SFP+)
Service processing cards
ET1D2FW00S00
NGFW Module A, with HW General Security Platform Software
ET1D2FW00S01
NGFW Module B, with HW General Security Platform Software
ET1D2FW00S02
NGFW Module C, with HW General Security Platform Software
ET1D2IPS0S00
IPS Module A, with HW General Security Platform Software
ACU2
WLAN ACU2 Access Controller Unit(128 AP Control Resource Included)***
Optical transceivers
FE-SFP optical transceiver
S-SFP-FE-LH40SM1310
Optical transceiver, eSFP, FE, single-mode module (1,310 nm, 40 km, LC)
S-SFP-FE-LH80SM1550
Optical transceiver, eSFP, FE, single-mode module (1,550 nm, 80 km, LC)
GE-SFP optical transceiver
29
SFP-1000BaseT
Copper transceiver, SFP, GE, electrical interface module (100m, RJ45)
eSFP-GE-SX-MM850
Optical transceiver, eSFP, GE, multimode module (850 nm, 0.5 km, LC)
SFP-GE-LX-SM1310
Optical transceiver, SFP, GE, single-mode module (1,310 nm, 10 km, LC)
S-SFP-GE-LH40SM1310
Optical transceiver, eSFP, GE, single-mode module (1,310 nm, 40 km, LC)
S-SFP-GE-LH40SM1550
Optical transceiver, eSFP, GE, single-mode module (1,550 nm, 40 km, LC)
Huawei Enterprise Sx700 Series Switch Product
S-SFP-GE-LH80SM1550
Optical transceiver, eSFP, GE, single-mode module (1,550 nm, 80 km, LC)
eSFP-GE-ZX100SM1550
Optical transceiver, eSFP, GE, single-mode module (1,550 nm, 100 km, LC)
10 GE-XFP Optical transceiver
XFP-SX-MM850
Optical transceiver, XFP, 10G, multimode module (850 nm, 0.3 km, LC)
XFP-STM64-LXSM1310
Optical transceiver, XFP, 10G, single-mode module (1,310 nm, 10 km, LC)
XFP-STM64-LH40SM1550
Optical transceiver, XFP, 10G, single-mode module (1,550 nm, 40 km, LC)
XFP-STM64SM1550-80 km
Optical transceiver, XFP, 10G, single-mode module (1,550 nm, 80 km, LC)
10 GE-SFP+ Optical transceiver
OMXD30000
Optical transceiver, SFP+, 10G, multimode module (850 nm, 0.3 km, LC)
OSX010000
Optical transceiver, SFP+, 10G, single-mode module (1,310 nm, 10 km, LC)
OSX040N01
Optical transceiver, SFP+, 10G, single-mode module (1,550 nm, 40 km, LC)
OSXD22N00
Optical transceiver, SFP+, 10G, single-mode module (1,310 nm, 0.22km, LC, LRM)
LE2MXSC80FF0
Optical transceiver, SFP+, 10G, single-mode module (1,550 nm, 80 km, LC) (only
for 8-port 10G BASE interface cards)
SFP-10G-USR
Optical transceiver, SFP+, 10G, multimode module (850 nm, 0.1 km, LC)
SFP-10G-ZR
Optical transceiver, SFP+, 10G, single-mode module (1,550 nm, 80 km, LC)
SFP-10G-AOC3M
AOC optical transceiver, SFP+, 850 nm, 1G to 10G, 0.003 km
SFP-10G-AOC10M
AOC optical transceiver, SFP+, 850 nm, 1G to 10G, 0.01 km
QSFP-H40GAOC10M
Optical transceiver,QSFP+,40G,(850nm,10m,AOC)
QSFP-4SFP10AOC10M
Optical transceiver, QSFP+, 40G, (850nm,10m,AOC) (Connect to four SFP+ Optical
Transceiver)
SFP-10G-BXU1
10G Base, Bi-Directional (BIDI) optical transceiver, SFP, 10G, single-mode module
(TX1270 nm/RX1330 nm, 10 km, LC)
SFP-10G-BXD1
10G Base, BIDI optical transceiver, SFP, 10G, single-mode module (TX1330 nm/
RX1270 nm, 10 km, LC)
SFP-10G-ZCW1571
Optical transceiver, SFP+, 10G, single-mode module (CWDM, 1,571 nm, 70 km, LC)
SFP-10G-ZCW1591
Optical transceiver, SFP+, 10G, single-mode module (CWDM, 1,591 nm, 70 km, LC)
SFP-10G-ZCW1611
Optical transceiver, SFP+, 10G, single-mode module (CWDM, 1,611 nm, 70 km, LC)
SFP-10G-iLR
Optical Transceiver,SFP+, 9.8G, Single-mode Module (1310nm,1.4km,LC)
40 GE optical transceivers
QSFP-40G-SR4
Optical transceiver, Quad Small Form-Factor Pluggable (QSFP), 40G, multimode
module (850 nm, 0.15 km, MPO) (connecting to one QSFP+ optical transceiver)
QSFP-40G-iSR4
Optical transceiver, QSFP, 40G, multimode module (850 nm, 0.15 km, MPO)
(connecting to four SFP+ optical transceivers)
QSFP-40G-LX4
40GBase-LX4 Optical Transceiver,QSFP+,40GE,Single-mode(1310nm,2km,LC),Multimode(1310nm,0.15km,LC)
QSFP-40G-iSM4
40GBase-iSM4 Optical Transceiver, QSFP+, 40G, Single-mode Module
(1310nm,1.4km,MPO)(Connect to four SFP+ Optical Transceiver)
QSFP-40G-eSM4
40GBase-eSM4 Optical Transceiver, QSFP+, 40G, Single-mode Module
(1310nm,10km,MPO)(Connect to four SFP+ Optical Transceiver)
Huawei Enterprise Sx700 Series Switch Product
30
QSFP-40G-LR4
40G Base-LR4 optical transceiver, QSFP+, 40G, single-mode module
(1,310 nm, 10 km, LC)
QSFP-40G-eiSR4
40G Base-SR4 Optical transceiver, QSFP+, 40G, multimode module
(850 nm, 0.3 km, MPO) (connecting to four SFP+ optical transceivers)
CFP-40G-SR4
High Speed Transceiver, CFP, 40G, Multimode Module (850nm,4*10G,0.1km,MPO)
CFP-40G-LR4
High Speed Transceiver, CFP, 40G, Single-mode Module (1310nm
band,41.25G,10km,stright LC)
CFP-40G-ER4
High Speed Transceiver, CFP, 40G, Single-mode Module (1310nm
band,41.25G,40km,stright LC)
CFP-40G-ZR4
High Speed Transceiver,CFP,40G,Single-mode Module(1550nm
band,41.25G,80km,stright LC)
QSFP-40G-ER4
40G Base-ER4 Optical Transceiver, QSFP+, 40G, Single-mode Module
(1310nm,40km,LC)
100GE optical transceivers
CFP-100G-SR10
High Speed Transceiver, CFP, 100G, Multimode Module
(850nm,10*10G,0.1km,MPO) (Can connect to 10 SFP+ ports or 2 QSFP+ ports)
CFP-100G-LR4
High Speed Transceiver, CFP, 100G, Single-mode Module (1310nm
band,4*25G,10km,stright LC)
CFP-100G-ER4
High Speed Transceiver, CFP, 100G, Single-mode Module (1310nm
band,4*25G,40km,stright LC)
CFP-100GE-ZR4
100GBase,CFP Module,100G,Single-mode Module(1310nm
band,4*25G,80km,stright LC)
BIDI-SFP optical transceivers
SFP-FE-LX-SM1310BIDI
Optical transceiver, eSFP, FE, BIDI single-mode module (TX1310/RX1550, 15 km, LC)
SFP-FE-LX-SM1550BIDI
Optical transceiver, eSFP, FE, BIDI single-mode module (TX1550/RX1310, 15 km, LC)
SFP-GE-LX-SM1310BIDI
Optical transceiver, eSFP, GE, BIDI single-mode module (TX1310/RX1490,10 km, LC)
SFP-GE-LX-SM1490BIDI
Optical transceiver, eSFP, GE, BIDI single-mode module (TX1490/RX1310,10 km, LC)
SFP-10G-ERSM1330-BIDI
Optical Transceiver,SFP+,10G,BIDI Single-mode Module(TX 1330nm/RX
1270nm,40km,LC)
SFP-10G-ERSM1270-BIDI
Optical Transceiver,SFP+,10G,BIDI Single-mode Module(TX 1270nm/RX
1330nm,40km,LC)
LE2MGSC40ED0
Optical transceiver, SFP, GE, BIDI single-mode module (TX1490/RX1310, 40 km, LC)
LE2MGSC40DE0
Optical transceiver, SFP, GE, BIDI single-mode module (TX1310/RX1490, 40 km, LC)
SFP-GE-BXU1-SC
1000Base, BIDI optical transceiver, SFP, GE, single-mode module (TX1490nm/
RX1310nm, 10km, SC)
SFP-GE-ZBXD1
Optical Transceiver, eSFP,GE,BIDI Single-mode Module
(1570nm(Tx)/1490nm(Rx),80km,LC)
SFP-GE-ZBXU1
Optical Transceiver,eSFP,GE,BIDI Single-mode Module
(1490nm(Tx)/1570nm(Rx),80km,LC)
Power modules
31
PAC-2200WF
2,200W AC power module
PDC-2200WF
2,200W DC power module
Huawei Enterprise Sx700 Series Switch Product
W2PSA0800
800W AC Power Module(black)
Software
ET1SBSM27000
S12700 V200R007C00 software
ET1SBSM28000
S12700 V200R008C00 software
ET1SBSM29000
S12700 V200R009C00 software
License
ET1SMPLS0000
MPLS Function License
ET1SNQA00000
NQA Function License
ET1SIPV60000
IPV6 Function License
ET1SSVFF0000
SVF Function License (applicable only to the S12700 series)
ET1SFIB128K0
X-series LPU FIB Resource License-128K
ET1SFIB512K0
X-series LPU FIB Resource License-512K
ET1SWL512AP0
WLAN Access Controller AP Resource License-512AP (with the X-series LPU used)
ET1SWL128AP0
WLAN Access Controller AP Resource License-128AP (with the X-series LPU used)
ET1SWL64AP00
WLAN Access Controller AP Resource License-64AP (with the X-series LPU used)
ET1SWL16AP00
WLAN Access Controller AP Resource License-16AP (with the X-series LPU used)
L-ACU2-128AP
ACU2 Wireless Access Controller AP Resource License (128 AP)
L-ACU2-256AP
ACU2 Wireless Access Controller AP Resource License (256 AP)
L-ACU2-384AP
ACU2 Wireless Access Controller AP Resource License (384 AP)
L-ACU2-512AP
ACU2 Wireless Access Controller AP Resource License (512 AP)
Documentation
ET1IV2R5C0C0
S12700 Series Agile Switches Product Documentation (Chinese)
ET1IV2R5C0E0
S12700 Series Agile Switches Product Documentation (English)
* The X1E series cards use ENP chips and provide native AC and unified user management functions.
** The OSP card supports the CheckPoint IPS and F5 ADC load balancer, and can run Windows, SUSE, and
VMware operating systems.
*** Each ACU2 card can manage 2K APs. An S12708 switch can have a maximum of 7 ACU2 cards installed
and can manage up to 14K APs. An S12712 switch can have a maximum of 11 ACU2 cards installed and can
manage up to 22K APs.
10 Others
The latest version of S12700 is V2R8.
Huawei Enterprise Sx700 Series Switch Product
32
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
Trademark Notice
, HUAWEI, and
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
General Disclaimer
The information in this document may contain predictive statements including,
without limitation, statements regarding the future financial and operating results,
future product portfolio, new technology, etc. There are a number of factors that
could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information is
provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change the information at any time without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement