ROBIC SC-505 Multi-Mode Stopwatch Operating Instructions

 ROBIC
SC-505 Multi-Mode
Chrono
Operating Instructions
functions. You can time events in any mode up to 24 hours With
1/1000 second resolution. The SC-505 automatically counts up to 99
lap or split readings and hag memory recall of the last five (5)
readings.
Before Operating the SC-505, the display should show all zeros. If the
timer I$ NOt running (STOP appears), press "B" until all Zeros appear.
If the timer is running (RUN appears) press "A" to Stop and press "B"
The Lap Chronograph records and displays the interval of time from
the previous reading(s). The Split Chronograph shows the
accumulated time from the start of the event.
TIMING SINGLE EVENTS: vou may time single events in either
the lap or split mode. Press "A" to start timing (RUN appears). press
"A" again to Stop timing (STOP appears). Press "B" to reset to all
Zeros.
MULTIPLE LAP or SPLIT TIMING: Select LAP or SPLIT mode
by pressing "D." Press "A" to start timing. RUN appears. Press "B"
to record lap or split times. The LAP COUNTER will increase by one
(1) for each reading taken. Press "A" to stop timing and "B" to reset to
all zeros.
LAP RELEASE: The time reading will remain frozen for 15 seconds
or press "D" to release the chronograph to current running time.
MEMORY RECALI: You may review up to the previous five (5)
time readings by pressing "C" (RECALL appears) while the timer is
running or stopped (but not reset to all Zeros).
OTHER FEATURES: (1) ON DEMAND MEMORY. You may
continue to record lap or split times by pressing "B" even while you
are using the RECALL function. (2) Record C ONTINUOUS
SINGLE EVENTS by pressing "A" to start timing and "A" again to
Stop timing. Repeat this sequence as many times as necessary. Reset
t0 zeros by pressing "В" While the timer is stopped. (3) The LAP
COUNTER automatically records up to 99 readings, after which the
timer will stop.
">