Rotel RA-1060 Stereo Integrated Amplifier Owner's manual

Below you will find brief information for Stereo Integrated Amplifier RA-1060. This high-performance amplifier boasts a custom-designed toroidal transformer and generous power reserves for exceptional audio. It features independent input selectors for listening and recording simultaneously, convenient controls, and connections for various audio sources. The included RR-AT92 remote control enhances usability.

PDF Download
Document
Rotel RA-1060 Stereo Integrated Amplifier Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • High-performance amplifier
  • Custom-designed toroidal transformer
  • Independent input selectors
  • RR-AT92 remote control
  • High power reserves
  • Symmetrical circuit traces

Frequently asked questions

The RA-1060 has two sets of speaker outputs (A and B). Use insulated two-conductor stranded wire and ensure consistent polarity for optimal sound.

Instead of conventional tone controls, the RA-1060 has a CONTOUR control which selects different equalization curves.

Yes, if only one set of speakers is used at any time. If both A and B speakers are in use, 8 ohms or more is recommended.

It allows other Rotel amplifiers to be turned on/off using a 12-volt signal from the RA-1060.

Press POWER and 2 simultaneously for RT-940AX, or POWER and 1 for RT-955.
Preparing document for printing…
0%