Ruby Tech CR-2010 User's Manual

Add to my manuals
3 Pages

advertisement

Ruby Tech CR-2010 User's Manual | Manualzz

RUB

TECH

Intellident Switch

Central Office Switch

CR-2010

CR-2010

24-Port 100M SEP-SC Fiber + 2 Gigabit SEP-SC Fiber/TP(Fixed) Dual Media Port Intelligent

Ethernet Switch

Supports in-band/out-of-band

management

Supports backpressure for half

duplex and 802.3x flow control for full

duplex

Supports 2 FE ports on CPU board for

management network

Supports head of line (HOL) blocking

prevention

Max switching capacity: 8.8G non-

blocking at wire speed

Supports chassis ID for location

alignment

Supports management through any

Ethernet port and RS-232

Supports short message and email

for trap and alarm

Supports per port external loopback

capability

Supports port mirroring function

Support MIB II, Bridge MIB, Ethernet

MIB, Enterprise MIB, RMON I MIB

Supports port-based/802.1v and

802.1q tagged VLAN, up to 256

active VLANs

Supports IP multicast with IGMP

snooping

Supports Ethernet multicasting and

broadcasting and flooding storm

control

Supports max of 50 per port allowed

MAC address entries and 50 global

denied MAC address entries for port

security

Supports max. 32 entries of illegal

table

Supports Auto-ping function with

adjustable interval

Supports 802.1p CoS with 2 level

priority

Supports detection of temp. x 2,

voltage, fans speed x 3

Supports 3 fans: two embedded in

power and one driven by two power

Supports dual redundant pluggable

power with loading balance

Performance:

Bandwidth: 8.8Gbps Switching Capacity

VLAN: 256 active

IP multicast table entries: 2k

Supports Packet length up to max of 1536 bytes long

Supports 10k MAC address table

Standards Compliance:

IEEE 802.3u /z /x /ab /ad

IEEE 802.1d /p /q /v /x /advanced 802.1x

100Base-FX Fast Ethernet Fiber Specification

1000Base-SX/1000Base-LX Gigabit Ethernet Fiber specification

SNMP

RMON

Protocol Support:

802.1d/1w/1s STP

802.3ad LACP

802.1q with GVRP/GMRP/GARP

802.1p priority queue

IGMP snooping

ARP, RARP, RIP, DHCP server/client/relay

Telnet, BootP, TFTP, FTP, HTTPD, NTP

Network Management:

RFC 1213 MIB (MIB-II)

Interface MIB

Address Translation MIB

IP MIB

ICMP MIB

TCP MIB

UDP MIB

SNMP MIB

RFC 1757 RMON MIB

Statistics Group 1

History Group 2

Alarm Group 3

Event Group 9

RFC 1493 Bridge MIB

RFC 1643 Ethernet MIB

Enterprise MIB

Maximum Switching Ports:

The maximum service port capability:

- 24 Fast Ethernet ports

- 2 Gigabit Ethernet ports

RUB

TECH

Intellident Switch

Central Office Switch

Overview

CR-2010 implements 24 100Mbps SEP

/SC fiber ports and 2 Giga fiber (SEP/

SC)/TP(Fixed) dual media ports, specifically designed for MTU (Multi-

Tenant Unit) application.

It's fully compliant with the standards of IEEE 802.3/u/x/z/ab. With SNMP agent and web-based management, the network administrator can logon the switch to monitor, and configure.

In addition, CR-2010 abounds with functions, including QoS (Quality of

Service), tag-/port-based VLAN, Port

Trunking, Bandwidth Control, Port

Security, Fail-over, RMON and IGMP snooping capability via the intelligent software. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications with security.

Network Interface:

1000Base-T:

- Connectors: RJ-45

- Auto-Negotiation

- Transmission: Full/Half-Duplex

- Max. Cable Length: up to 100m

100Base-FX (Multi mode):

- Connectors: SC

- Transmission: Full/Half-Duplex

- Max. Cable Length: up to 2km for 50/125

- Wavelength: 1310nm

100Base-FX (Single mode):

- Connectors: SC / Bidi-SC

- Transmission: Full/Half-Duplex

- Max. Cable Length: 100km for 9/125

- Wavelength: 1310nm or 1550nm

1000Base-SX (Multi mode):

- Connectors: SC

- Auto-Negotiation

- Transmission: Full-Duplex only

- Max. Cable Length: 220m for 50/125

- Wavelength: 850nm

1000Base-LX (Single mode):

- Connectors: SC

- Auto-Negotiation

- Transmission: Full-Duplex

- Max. Cable Length: 50km for 9/125

- Wavelength: 1310nm or 1550nm

Led Indicate

LED Function

CPU Power Power status

Module LNK/ACT(TP P1-P2) Link and Activity status

CPU run CPU Activity status

Fiber Ports FE Fiber: LNK/ACT Port Link and Activity status

Gbe Fiber: LNK/AC TPort Link and Activity status

Gbe TP Ports LNK/ACT Port Link and Activity status

Power

Requirement

AC Power: 90 ~ 300VAC

DC Power: -36~-72VDC with two independent power cords

Power Consumption: 50W

Ambient Temperature: 0 ~ 50 C

Humidity: 5 ~ 90%

Dimensions: 442(W) x 347.9(D) x mm

(Standard 19" rack mount with 2U height)

Certification: FCC Part 15 Class A,CE Mark

RUB

TECH

Intellident Switch

Central Office Switch

Model Numbers

CR-2010SP 24-Port 100M SEP-SC+2 Gigabit TP/SFP Dual Media Ports Managed Switch

(without Power Module)

CR-2010GB 24-Port 100M SEP-SC+2 Gigabit TP/GBIC Dual Media Ports Managed Switch

(without Power Module)

CR-2010-P01 1U AC Power Module

CR-2010-P02 1U DC Power Module

Optional SEP Fiber Module for 100M Port

FM-SEP.SC SEP, FE SC Multi-Mode Fiber Module 1310nm

FM-SEP.SC.S05 SEP, FE SC Single-Mode 5Km Fiber Module 1310nm

FM-SEP.SC.S20 SEP, FE SC Single-Mode 20Km Fiber Module 1310nm

FM-SEP.SC.S40 SEP, FE SC Single-Mode 40Km Fiber Module 1310nm

FM-SEP.SC.S60 SEP, FE SC Single-Mode 60Km Fiber Module 1310nm

FM-SEP.BS5.S20 SEP, FE BiDi SC Single-Mode 20Km Fiber Module 1550nm, Type 1

FM-SEP.BS3.S20 SEP, FE BiDi SC Single-Mode 20Km Fiber Module 1310nm, Type 2

Optional SFP Fiber Module for Gigabit Port

SFP.LC 1000Base-SX GE SFP Multi-Mode Fiber Module 850nm

SFP.LC.S10 1000Base-LX GE SFP Single-Mode 10Km Fiber Module 1310nm

SFP.LC.S30 1000Base-LX GE SFP Single-Mode 30Km Fiber Module 1310nm

SFP.L5.S50 1000Base-LX GE SFP Single-Mode 50Km Fiber Module 1550nm

SFP.BL5.S10 1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1550nm, Type 1

SFP.BL3.S10 1000Base-LX GE SFP BiDi_LC 10Km Module Single Fiber 1310nm, Type 2

SFP.BL5.S20 1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1550nm, Type 1

SFP.BL3.S20 1000Base-LX GE SFP BiDi_LC 20Km Module Single Fiber 1310nm, Type 2

Optional GBIC Fiber Module for Gigabit Port

GBIC.SC 1000Base-SX GE GBIC MM Fiber Module MM 850nm

GBIC.SC.S10 1000Base-LX GE GBIC 10Km Fiber Module SM 1310nm

GBIC.SC.S30 1000Base-LX GE GBIC 30Km Fiber Module SM 1310nm

GBIC.SC.S50 1000Base-LX GE GBIC 50Km Fiber Module SM 1550nm

GBIC.BS5.S10 1000Base-LX GE GBIC BiDi_SC 10Km Module Single Fiber 1550nm, Type 1

GBIC.BS3.S10 1000Base-LX GE GBIC BiDi_SC 10Km Module Single Fiber 1310nm, Type 2

GBIC.BS5.S20 1000Base-LX GE GBIC BiDi_SC 20Km Module Single Fiber 1550nm, Type 1

GBIC.BS3.S20 1000Base-LX GE GBIC BiDi_SC 20Km Module Single Fiber 1310nm, Type 2

Note:

We recommend the SFP transceiver from the following vendors:

1. Ruby Tech Corporation

2. Agilient Technologies

3. AVAGO Technologies

4. Finisar Corporation

Ruby Tech Corp.

2F, No.7, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw

TEL:886-2-2785-3961 FAX:886-2-2786-3012 E-mail [email protected]

Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.

Copyright c 2008 Ruby Tech Corp. All rights reserved.

2008-03.10 Version A

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement