UK513
Service Manual
UK513
1 / 26
TABLE OF CONTENTS
WARNING--------------------------------------------------------------------------------------3
A. IMPORTANT SAFETY INSTRUCTION--------------------------------------3
B. SPECIFICATIONS ---------------------------------------------------------------------4
C. TIMING CHART------------------------------------------------------------------------5
D. ADJUSTMENT PROCEDURE-----------------------------------------------------7
E. TROUBLE SHOOTING HINTS---------------------------------------------------8
F. SPARE PARTS LIST------------------------------------------------------------------12
G. BLOCK DIAGRAM------------------------------------------------------------------ 20
H. EXPLODED DIAGRAM------------------------------------------------------------21
I. SCHEMATIC DIAGRAM----------------------------------------------------------22
J. PCB LAYOUT DIAGRAM---------------------------------------------------------23
UK513
2 / 26
WARNING
To prevent from fire or shock hazard,do not expose monitor to any rain or any form of water.High voltage is
inside the monitor so please do not remove the back cover of the cabinet if you are not a qualified monitor
engineer.Contact the local dealer or the nearest Proview branch office if you need help.
A. IMPORTANT SAFETY INSTRUCTION
Prior to using this service manual,please ensure that you have carefully followed all the procedures outlined in
the user's manual for this product.
1. Read all of these instructions.
2. Save these instructions.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning.Do not use liquid cleaner or aerosol
cleaner, use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart,stand or table.The product may fall,causing serious
damage to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation,to ensure
reliable operation of the product and to protect it from overheating.Those openings must not be
blocked or covered.The openings should never be blocked by placing the product on a bed,sofa, rug,
or other similar surface.This product should not be placed in a built-in installation,since proper
ventilation is provided.
8. This products should be operated with the type of power source indicated on the marked label.
If you are not sure of the type of power is available, consult with your dealer or local power company.
9. This product is equipped with a 3-wire grounding type plug,a plug having a third (grounding)
pin.This plug will only fit into a grounding-type power outlet.This is a safety feature.If you are
unable to insert the plug into the outlet,contact your electrician to replace your obsolete outlet.Do
not damage the purpose of the grounding-type plug.
10. Do not allow anything to rest on the power cord.Do not locate this product where persons will walk
on the cord.
11. Never push any kinds of objects into this product through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a risk of fire or electric shock.Never spill any kinds
of liquid on the product.
12. Do not attempt to service this product yourself,as opening or removing covers may expose you to
dangerous voltage points or other risk.Refer all servicing to service personnel.
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions.
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally,when the operating instructions are followed.Adjust
only those controls involved in the operating instructions ,since improper adjustment of
other controls may result in damage and will often require extra work by a qualified
technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance,indicating a need for service.
UK513
3 / 26
B. SPECIFICATIONS
Panel General Specification
Panel Model
Screen Diagonal
Active Display Area
Pixel Pitch
Number of Colors
View Angle
Horizontal
Vertical
Luminance of White
Contrast Ratio (Typical)
Maximum Resolution
Recommend Resolution
Synchronization Range
Horizontal
Vertical
Pixel Rate
User Control
OSD Function
Power Source
Power Consumption
Connection Type
Input Signal
Video
Sync.
Color Temperature
Dimension (WxHxD)
Monitor Weight
Base Operation
Tilt
Power Saving
ON
Sleep mode
OFF
NEC SVA150XG03TB
15” TFT
304.1mm (H) x 228.1mm (V)
0.297(H) x 0.297(V) mm
262K colors
+/-60 degree
+40/-60 degree Typical
250cd/m²(Typical)
400:1
1024 x 768 @ 75Hz
1024 x 768 @ 75Hz
30 – 60 KHz
60– 75 Hz
80 MHz
5 Key Switch
Brightness, Contrast, H-position, V-position, H-size,
Phase, Reset, Color selection (R, G, B, cool, warm), OSD ,
Language, Exit, Auto
90 – 264 Vac 60 / 50 Hz
36 W (max.)
15 Pin D-Sub Type;
Analog R.G.B. , 0.7Vp-p / 75 Ohm
TTL level,positive or negative polarity
Cool / Warm / user mode
344..4 x 332.7 x 166.0 (mm)
2.7 kg
-5 / + 15 degree
＜ 36W
＜ 3W
＜ 3W
Signal Connector Pin Assignment
D-SUB Pin
1.Red Video
2.Green Video
3.Blue Video
4.GND
5.Self Test
Sound Output
UK513
6. Red Ground
7. Green Ground
8. Blue Ground
9. VCC +5V
10. Sync. GND
11. GND
12. SDA For DDC2B
13. H-sync.
14. V-sync-DDC1
15. SCL For DDC2B
No Audio
4 / 26
C . TIMING CHART
D
Video
B
A: Period
B: Active
C: Sync Width
D: Back Porch
E: Front porch
E
Sync.
A
C
VGA
720X400
VGA
640X480
VESA
640X480
VESA
800X600
VESA
800X600
VESA
800X600
VESA
800X600
28.322MHz
25.175MHz
31.500MHz
36.000MHz
40.000MHz
50.000MHz
49.500MHz
31.469KHz
31.469KHz
37.861KHz
37.500KHz
35.156KHz
37.879KHz
48.077KHz
46.875KHz
A-period
31.777us
31.778us
26.413us
26.667us
28.444us
26.400us
20.800us
21.333us
B-Active
25.422us
25.422us
20.317us
20.317us
22.222us
20.000us
16.000us
16.162us
CSync.width
3.813us
3.813us
1.270us
2.032us
2.000us
3.200us
2.400us
1.616us
D-Back
Porch
1.907us
1.589us
3.810us
3.810us
3.556us
2.200us
1.280us
3.232us
E-Front
Porch
0.635us
0.954us
1.016us
0.508us
0.666us
1us
1.12us
0.323us
F . V
70.087Hz
59.941Hz
72.810Hz
75.000Hz
56.250Hz
60.317Hz
72.188Hz
75.000Hz
A-Period
14.268ms
16.683ms
13.734ms
13.333ms
17.778ms
16.579ms
13.853ms
13.333ms
B-Active
12.711ms
15.253ms
12.678ms
12.800ms
17.067ms
15.840ms
12.480ms
12.800ms
CSync.width
0.064ms
0.064ms
0.079ms
0.080ms
0.057ms
0.106ms
0.125ms
0.064ms
D-Back
Porch
1.112ms
0.794ms
0.528ms
0.427ms
0.626ms
0.607ms
0.478ms
0.448ms
E-Front
Porch
0.381ms
0.572ms
0.449ms
0.026ms
0.028ms
0.026ms
0.77ms
0.021ms
H/V
SYNC
－ ＋
－
－
－
＋
＋
＋
＋
Interlaced
NON
Preset
Modes
Pixel Rate
F.H
UK513
－
NON
－
NON
VESA
640X480
31.500MHz
－
NON
＋
NON
＋
NON
＋
NON
＋
NON
5 / 26
Preset
Modes
VESA
1024X768
VESA
1024X768
VESA
1024X768
65.000MHz
75.000MHz
78.750MHz
48.363KHz
56.476KHz
60.023KHz
A-period
20.677us
17.707us
16.660us
B-Active
15.754us
13.653us
13.003us
C-Sync.width
2.092us
1.813us
1.219us
D-Back
Porch
2.462us
1.920us
2.235us
E-Front
Porch
0.369us
0.321us
0.203us
F . V
60.004Hz
70.069Hz
75.029Hz
A-Period
16.666ms
14.272ms
13.328ms
B-Active
15.880ms
13.599ms
12.795ms
C-Sync.width
0.124ms
0.106ms
0.050ms
D-Back
Porch
0.600ms
0.513ms
0.466ms
E-Front
Porch
0.062ms
0.054ms
0.017ms
－
－
＋
Pixel Rate
F.H
H/V
SYNC
Interlaced
UK513
－
NON
－
NON
＋
NON
6 / 26
D. ADJUSTMENT PROCEDURE
ITEM
Program Menu.
Power supply
Check
A
﹟Test Meter
﹡Test Point
﹫Pattern
﹟Digital Voltmeter
﹡CN2
﹫Crosshatch Pattern
(1280x768, 60Hz)
Power Saving ﹟Wattmeter
Check
﹟PC or Pattern
generator
﹫Crosshatch Pattern
(1280x768, 60Hz)
B
Into Factory ﹟PC or Pattern
mode
generator
﹫Crosshatch Pattern
C
(1280x768, 60Hz)
Check
Value
Operation
220Vac
±0.2V
1. Plug power cable into the LCD monitor directly.
2. Make sure the voltage of the power plug (CN2)
on the Power Board to the value shown at right.
1. Unplug the signal cable into the monitor.
2. Turn the power switch of the monitor ON.
3. Check monitor power indicator light up blue
flashing every other second.
4. Make sure the wattmeter value shown at right.
5. OSD will be display “NO SIGNAL” Picture.
‹ 3W
1. Hold Down key,then turn the power switch of the
monitor OFF.
2. Hold Up key,then turn the power switch of the
monitor ON.
3. You can enter factory adjustment mode.
Auto mode
Check
﹟PC or Pattern
generator
﹫Crosshatch Pattern
(1280x768, 60Hz)
1.Press and release the Auto key to adjust display
mode to its utmost performance according to VGA
setting.
White
Balance
Adjust
﹟PC or Pattern
generator
﹫White Pattern
(1280x768, 60Hz)
1. Move the OSD to the COLOR mode (AUTO COLOR).
2. set color is Cool using the OSD,Check the value
shown at right.
Y = 200±20cd/m^2 x = 0.283±0.02 y = 0.297±0.02
3. set color is Warm using the OSD,Check the value
shown at right.
Y = 200±20cd/m^2 x = 0.313±0.02 y = 0.329±0.02
D
E
OSD
F Language
Setting
UK513
﹟PC or Pattern
generator
1. Move the OSD to the OSD setting mode
2. Move the OSD to the LANGUAGE mode.
3. You can choose one of the language you need.
7 / 26
E . TROUBLE SHOOTING HINTS
No Display
( Black )
LED ON ?
NO
NO
Power
Supply ?
YES
Change
power
board
YES
Push the power
ON/OFF switch
LED Color
change ?
YES
Back light
ON?
NO
To Step 2
NO
Check main
board
CON1/Pin1
Check the
CN1/Pin1,2 of
High Voltage !
power board
+12V ?
Hi / Lo under
push power
sw?
YES
NO
Make sure the
connection of
power board is
fine
YES
NO
NO
To Step 2
A
YES
Display ?
Check
Power board
YES
B
UK513
Nice Job !
8 / 26
A
B
Check the
connection of
control cable
NO
Change the
main board
Hi / Lo under
push power sw?
YES
Display ?
YES
NO
Change the
power board
Nice Job !
Display ?
YES
Change the
main board
Nice Job !
NO
To Step 2
Check the main
board 100-240V
input?
NO
Check
CN1/Pin1,2
YES
NO
Check the main
board +5.0 V ?
Check
I1,I2
YES
C
UK513
9 / 26
C
Check the main
board 3.3V input ?
NO
Check
I2
YES
Check 1.8V
Input
NO
Check
I1
YES
NO
Check
CN2/Pin25,27
Check H/V
input Signal ?
YES
Display ?
NO
Change
Signal Cable
YES
Nice Job !
UK513
10 / 26
No display
(White)
Check the main
board 5V ?
NO
Check
Power Board
NO
Check
U1
YES
+3.3V ?
YES
NO
Check
Signal input
H/V Input
Signal ?
YES
Display ?
NO
Change
Signal Cable
YES
Nice Job !
UK513
11 / 26
F. SPARE PARTS LIST
Main Board/ Control Board
No. Parts Number Parts Description
1 281-031-39004 SMD 390ohm 0603 +-1%
2
281-031-75R04
RES
3
281-035-0R04
4
75 1% 1/10W 0603 SMD.
Unit
EA
Q'ty Location
1 R40,
EA
3
R29,R32,R36,
RES 0ohm 5% 1/10W 0603 SMD.
EA
2
R3,R39,
281-035-1004
RES 10ohm 5% 1/10W 0603 SMD.
EA
1
R41,
5
281-035-1014
RES 100ohm 5% 1/10W 0603 SMD
EA
4
R66,R67,R213,R4,
6
281-035-1024
RES
1K 5% 1/10W 0603 SMD.
EA
4
R5,R14,R69,R70,
7
281-035-1034
RES 10K 5% 1/10W 0603 SMD.
EA
11
R21,R23,R42,R64,R65,R68,R72,R19,R20,
R207,R47,
8
281-035-1044
RES 100K 5% 1/10W 0603 SMD.
EA
1
R6,
9
281-035-1824
RES 1.8K 5% 1/10W 0603 SMD.
EA
2
R17,R22,
10 281-035-2004
RES
EA
3
R28,R31,R35,
11 281-035-2224
RES 2.2K 5% 1/10W 0603 SMD.
EA
2
R24,R204,
12 281-035-2234
RES 22K 5% 1/10W 0603 SMD.
EA
1
R13,
13 281-035-3304
RES 33ohm 5% 1/10W 0603 SMD.
EA
4
R211,R212,R26,R27,
14 281-035-3314
RES 330ohm 1/10W 0603 SMD.
EA
2
R62,R63,
15 281-035-3324
RES 3.3K 5% 1/10W 0603 SMD.
EA
1
R208,
16 281-035-3334
RES 33K 5% 1/10W 0603 SMD.
EA
2
R206,R1,
17 281-035-4704
RES 47ohm 5% 1/10W 0603 SMD.
EA
7
R30,R34,R37,R43,R44,R45,R46,
18 281-035-4714
RES 470ohm 5% 1/10W 0603 SMD.
EA
1
R33,
19 281-035-4724
RES 4.7K 5% 1/10W 0603 SMD.
EA
2
R2,R16,
20 281-035-8224
RES 8.2K 5% 1/10W 0603 SMD.
EA
1
R74,
21 281-075-0R04
RES
0ohm 5% 1/4W 1206 SMD
EA
2
D11,D12,
22 282-103-2454
RES-NET 10Kohm 5% SMD 8P4R.
EA
6
RN12,RN13,RN14,RN15,RN6,RN5,
20 5% 1/10W 0603 SMD.
23 282-220-2454
22X4 +-5% 1/10W SMD 8P4R
EA
2
RN10,RN11,
24 285-056-B160C
330-100-1625325
W
330-221-1620326
W1
330-470-1627327
W
381-10228
035054H
381-22029
032554H
SMD VARISTOR SIZE 0603 5.6V 30PF
EA
8
D4,D7,D9,D8,D101,D3,D5,D6,
EC 10uF 16V 105°C M TP MI 4*5
EA
7
TC7,TC9,TC8,TC10,TC11,TC12,TC14,
EC.220uF/16V 105°C Φ6*11
EA
3
TC3,TC4,TC6,
EC.H7mm 105°C 47uF/16V
EA
2
TC1,TC2,
EA
1
C23,
EA
4
C49,C52,C66,C68,
385-10430
032584H
Y5V 0.1u/25V +80%-20% 0603FOR
RoHS
EA
35
C1,C2,C4,C6,C7,C11,C12,C13,C14,C15,C17
,C32,C33,C34,C35,C36,C37,C38,C39,C40,
C41,C42,C43,C44,C45,C46,C47,C48,C53,
C54,C56,C59,C3,C64,C65,
385-105031684H
385-47332
032584H
33 401-270-0205
Y5V 1uF/16V +80-20% 0603. FOR
RoHS
Y5V 0.047u/25V +80%-20% 0603FOR
RoHS
TACT SW 2P 6*3.5 H 5.0 180g
EA
6
C5,D31,D32,D33,D34,D35,
EA
6
C19,C21,C22,C25,C26,C31,
EA
5
S1,S2,S3,S4,S5,
34 481-LCC-0440
SOCKET 44PIN PLCC.
EA
1
U5,
35 483-302-2388
2.5P 254FH15 1S H8.50mm
EA
1
CN1,
31
UK513
NPO 1000P/50V +-5% 0603 SMD FOR
RoHS
SMD CC 22pF 25V NPO 0603. FOR
RoHS
12 / 26
36 506-0AI-18CE
EA
1
I1,
37 506-0AI-C1084 SMD REG.AIC1084CM 3.3V 5A.
EA
1
I2,
38 506-10E-8050IQ MXIC MX10E8050IQC PLCC44
EA
1
MCU,
39 506-524-LC21-S MEMORY IC 24LC21 SMD .ST
EA
1
U2,
40 506-5NM-24C16 24C16 SO8 MEMORY IC SMD.
EA
1
U4,
SMD MST TSU16AK LVDS+RSDS VGA
ONLY
EA
1
U3,
42 518-02N-3904
TR NPN PMBS3904 40V 100mA
EA
6
Q1,Q2,Q7,Q4,Q6,Q203,
43 518-02N-3906
TR PNP PMBS3906 40V 100mA
EA
1
Q204,
44 518-1CE-9435
MOSFET CE9435A S08.
EA
1
U1,
45 520-005-G317-F LED 3D2P
EA
1
D1,
46 528-2BA-T54C
SMD DIODE BAT54C SOT23.
EA
1
D1,
47 528-R1N-4148
DIODE 1N4148 SOT-34 SMD.
EA
1
D10,
48 531-110-49US
11.0592MHZ HC 49US CRYSTAL.
EA
1
Y1,
49 531-143-49US-2 KTS QYSTAL 14.318MHZ. 20PF
EA
1
X1,
50 558-352-5000
SMD FUSE 1206 24V 5A.
EA
1
F1,
51 600-151-5100B
POWER CORD 3P BALCK1.5M
EA
1
EA
1
41
506-MSTTSU16AK
AIC 1084CE 1.8V T0252 SMD.
52 610-151-28G9-A VGA Pigtail 1.5M WITHOUT AUDIO
53 630-008-1009
BASE 8P.180°
EA
1
C0N1,
54 630-008-C001
JST 1.5mm HEADER ZR S8B-ZR.
EA
1
J1,
55 630-026-S2006
BASE 2.0 26P /JWTA2006
EA
1
JP1,
56 630-028-1008S
BASE 28PIN
EA
1
CN2,
57 631-020-J572-2
20PIN 1.25PITCH->26PIN 2.0 PITCH
EA
1
58 631-C08-8M713 M713 8P2.0-1.5 290 +CORE
EA
1
59 640-003-0005
SHRINK TUBE 5mm Φ3mm
EA
1
60 701-150-V002
15"NEC PANEL B/L
15"NEC PANEL(PTS B/L) Response
time25
EA
1
EA
1
EA
1
EA
3
EA
9
EA
1
EA
1
EA
1
61 705-550-502V
62 707-250-3001-Z
15"NEC PANEL BACKBRIGHT BOARD
PMMA VH5-000
63 780-103-3000CA BEAD FCM1608K-300T07 HILISIN
SMD BEAD 0805 60Ω/100MHz 3A
64 780-104-600C30
HILISIN
65 860-ALZ-M513 M513 POWER 3in1 AU 2L
MSTAR TSU16AK LVDS PIGTALL
66 899-01F-M513-A
REV:A
PZ-456 KEY BOARD WITH GREEN
67 899-400-PZ456
LED
UK513
FB4,FB5,FB6,
FB1,FB3,FB7,FB8,FB9,FB10,FB11,FB12,L
1
13 / 26
Power Board
UK513
14 / 26
UK513
15 / 26
UK513
16 / 26
UK513
17 / 26
UK513
18 / 26
UK513
19 / 26
G. BLOCK DIAGRAM
Right
Left
AUDIO IN(OPTION)
LCD Panel
R
G
G
B
B
Right
R
Left
A/D_BOARD
VGA IN
INTERFACE
SDA
SCL
SDA
CCFL
SDA
DATA&CLK&VCC
5V
Vsync
12V
Vsync
DATA&CLK&VCC
Bri control
Hsync
KEY
Right
Left
ON/OFF
Hsync
CONTROL BOARD
Power Board
CCFL
5V
12V
Bri control
KEY
ON/OFF
AUDIO OUT(OPTION)
220/110V
Left
SPEAKER
Right
UK513
20 / 28
H. EXPLODED DIAGRAM
UK513
21 / 28
I. SCHEMATIC DIAGRAM
UK513
22 / 28
5
4
3
2
1
D
D
TOP LEVEL
1. S1:THE FIRST VERSION OF THE COST DOWN MODEL,MSTAR SOLUTION
2.change note:audio schematic add D13、D2；power schematic add R4；C101 change TC5
C
C
3.DVI schmatic add R8,R12.power schmatic add R18.
4.Change the fuse to 125V/5A DIP.
B
B
APPROVE BY
CHECK
BY
PREPARE BY
A
A
Title
MSTAR COSTDWON(DVI_I PIGTAIL) LVDS&RSDS OUT
Size
Document Number
Custom
Date:
5
4
3
2
Rev
A
TOP LEVEL
Wednesday, December 01, 2004
Sheet
1
1
of
7
5
4
3
2
1
+5V
VCC2V5
D11
To Inverter
D12
I1
33K VCC5V
BL_CTRL
C1
R1
D4001
D4001
0.1uF
3
VIN
VOUT
2
1
ADJ
TAB
4
VCC2V5
3
AIC1117-25CE
Q1
C3
1 R2
D
4.7K
BKLT_EN
TC1
C2
47uF/25V
0.1uF
4
6
D
VCC3V3_PANEL
0.1u
R3
VCC3V3
2
MMBT3904
33K
R39
R5
3
BRT_LEVEL
Q2
C5
1 R6
1u
+5V
VCC5V
1K
Added by lotuschou 20041111
100K
C4
BKLT_ADJ
0.1uF
4
2
MMBT3904
0R
I2
3
VIN
VOUT
2
1
ADJ
TAB
4
VCC3V3
TC2
47uF/25V
AIC1084-33CM
+5V
L1
4,5,6
C6
0.1uF
VCC5V
BEAD
C
C
U1
VCC3V3_PANEL
2
CN1
VCC5V
1
FB1
1
+
TC4
220uF/25V
1206
+5V
R13
22K
S3
2
BL_CTRL
BRT_LEVEL
+12V
1
MLB-201209-0220P-N2
C15
0.1uF
220uF/16V 0.1uF
1
6 PANELVCC_EN
HEADER5X2
VLCD
C11
CEM9435A SO8
0.1uF
C12
R14
1K
C13
R16
R15
0.1uF 100K(NC)
Q4
C14
4K7
B
MMBT3904
2
B
8
7
6
5
100
1
+ TC3
C0603
D4
D3
D2
D1
R4
S4
2
2
S1
S2
S3
G
3
10
9
8
7
6
5
4
3
2
1
1
2
3
4
S2
F1
0.1uF
1
1
1
1
1
FB3 1206
2
1
1
+12V
1
1
24V/5A
MLB-201209-0220P-N2
+
TC6
220uF/25V
C17
0.1uF
C0603
APPROVE BY
CHECK
BY
PREPARE BY
A
A
Title
MSTAR COSTDWON(DVI_I PIGTAIL) LVDS&RSDS OUT
Size
Document Number
Custom
Date:
5
4
3
2
Rev
POWER
Wednesday, December 01, 2004
A
Sheet
2
1
of
7
5
4
3
2
1
R28
20
C19
47nF
R30
47
C21
47nF
R31
20
C22
47nF
R33
470 C23
1000pF
R34
47
C25
47nF
R35
20
C26
47nF
R37
47
C31
47nF
BIN
4
GNDB
4
GIN
4
SOG
4
GNDG
4
RIN
4
GNDR
4
DDC5V
R20
10K
R19
SCL_D1
R26
SDA_D1
10K
DDC_CLK
33
R27
DDC_CLK
DDC_DAT
33
6
B
FB4
SBK160808T-300Y-S
G
FB5
SBK160808T-300Y-S
R
R212
NC
FB6
SBK160808T-300Y-S
R32
C24
75_1%
NC
D
VGA_DDC5V
D6
ESD
D5
ESD
U2
1
2
3
4
6
DDC_CLK1
6
33 33
DDC_DAT1
75_1%
NC
NC
NC
GND
8
7
6
5
VCC
VCLK
SCL
SDA
DDC5V
R21 10K
100
R8
AT24C21
DVI_DDC5V
NC
NC
NC
GND
VCC
VCLK
SCL
SDA
D8
D9
ESD
ESD
ESD
DDC5V
ADD R8 AND R12
U6
1
2
3
4
D7
VCC5V
8
7
6
5
R36
C30
75_1%
NC
DVI_5V
DDC_CLK
DDC_DAT
D1
BAT54C
DDC5V
10K
AT24C21
100
R210
1
2
DDC5V
R12
3
R211
C20
6
DDC_DAT
D
R29
DDC5V
C
C
DDC5V
HSYNC_IN
2
2
VSYNC_IN
D3
R17
100
R22
100
HSYNC
4
VSYNC
4
R23
D4
R24
10K
2.2K
10K
2K2
MMSZ5237B
3.3K
DVI_DDC5V
DVI_DDC5V
R208 3.3K
Q204
B
33K
2N3906
6
C
Q202
B
DDC_WP
2N3904
B+
B-
33K/NC
G+
E
100K
B
1 DVI_5V
R
1
L
U_GND
HPDET_D1
SDA_D1
SCL_D1
GND
B
GND
G
GND
R
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
1
3
5
7
9
11
13
15
17
19
21
23
25
27
DATA2DATA2+
GND
DATA1DATA1+
GND
DATA0DATA0+
GND
CLKCLK+
GND
VSYNC_IN
HSYNC_IN
4
B-
4
G+
4
G-
4
R+
4
R-
4
CLK+
4
CLK-
4
100
R209
2N3904
R205
B+
R222
E
33K/NC
R203 10K
VGA_DDC5V
VGA_DDC5V
Q203
B
R202
C
C
C
R206
MMSZ5237B
1
R201
R207
1
2N3906
B
R204
E
E
Q201
R223
B
100
GR+
DATA0+
DATA0DATA1+
DATA1DATA2+
DATA2CLK+
CLK-
R214
10R
R215 10R
R216 10R
R217 10R
R218 10R
R219 10R
R220 10R
R221 10R
B+
BG+
GR+
RCLK+
CLK-
R224
100
RCLK+
R225
100
C72
0.1uF
3
3
3
D30
BAV99
C74
0.1uF
C75
0.1uF
CHECK
BY
PREPARE BY
C76
0.1uF
1
1
VCC5V
VCC5V
2
1
2
VCC5V
1
1
1
2
C73
0.1uF
D29
BAV99
APPROVE BY
VCC5V
VCC5V
D28
BAV99
2
C71
0.1uF
D27
MMBD7000
2
VCC5V
3
D26
BAV99
3
3
D25
BAV99
VCC5V
1
2
C70
0.1uF
3
D24
BAV99
2
ESD
D23
BAV99
VCC5V
2
ST_DET1 6
D101
3
R213 100 HPDET_D1
A
CLK-
PHD 2.0/90D
1
CN2
C77
0.1uF
Title
MSTAR COSTDWON(DVI_I PIGTAIL) LVDS&RSDS OUT
Size
Document Number
Custom
Rev
VGA IN(DVI_ PIGTAIL)
Date:
5
4
3
2
Wednesday, December 01, 2004
Sheet
1
A
3
of
7
A
5
4
3
2
1
VCC3V3
VAD
VPLL
VDVI
VDPLL
VPO
FB7
VPO
VDD2V5
R+
RG+
GB+
BCLK+
CLK- VDVI
C
63
62
60
59
61
58
57
37
38
R+
RG+
GB+
BCLK+
CLKR40
40
41
43
44
46
47
49
50
52
0.1uF
53
11
21
84
94
104
114
126
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
45
51
35
18
87
97
117
88
89
90
91
92
93
98
99
100
101
102
103
106
107
108
109
110
111
112
113
124
125
128
1
4
5
8
9
12
13
14
15
16
17
22
23
24
25
NC/GPO0
NC/GPO1
NC/GPO2
NC/GPO3
NC/GPO4
DDC1_DAT/GPO7
DDC1_CLK/GPO8
NC
NC/GPO9
NC/OCLK
NC/ECLK
83
82
81
80
79
28
29
118
119
120
121
R+
RG+
GB+
BCK+
CKREXT
R41
6 HWRESET
6 INT
R42
HWRESET
INT
66
REFP
67
REFM
2
7
BKLT_ADJ
VOLUME
C49
HWRESETZ
INT
73
74
PWM0
PWM1
33
XIN
22pF
X1
14.318MHZ
BYPASS
AVSS_MPLL
C34
C35
C36
C37
C38
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
D
LVACKP
LVACKM
5
5
GA6
GA7
5
5
BA2
BA3
BA4
BA5
5
5
5
5
BA6
BA7
RB2
RB3
5
5
5
5
RB4
RB5
5
5
VDD2V5
VCC2V5
FB8
PBY160808T-600Y-S
TC8
C39
C40
C41
C42
10uF/16V
0.1uF
0.1uF
0.1uF
0.1uF
TC9
C43
C44
10uF/16V
0.1uF
0.1uF
VCC3V3
VAD
FB9
PBY160808T-600Y-S
C
VCC3V3
VCC3V3
VDPLL
VPLL
FB10
FB11
39
42
48
54
36
68
56
64
A
GNDP
GNDP
GNDP
GNDP
GNDP
GNDP
GNDP
PBY160808T-600Y-S
LVB3P
R44
R51 52 62 63
CHANGE TO
RN16
5
47
TC11
C47
10uF/16V
0.1uF
TC10
C46
10uF/16V
0.1uF
B
STV2
OCLK
ECLK
5
5
5
VCC3V3
VDVI
FB12
OSP
ESP
76
75
BUS TYPE
AD0/GPO6
AD1
AD2
AD3/GPO5
RDZ / SCL
WRZ / SDA
ALE / CS
6
30
77
78
31
71
70
69
AD0
AD1
AD2
AD3
RDZ
WRZ
ALE
6
6
6
6
6
6
6
122
123
LVB2P
LVB2M
5
5
LVB2P
LVB2M
10
20
85
95
105
115
127
3
2
AVSS
AVSS
AVSS
0.1uF
AVSS_PLL
C56
XOUT
AVSS_MPLL
22pF
34
AVSS
AVSS
AVSS
C52
C33
0.1uF
PBY160808T-600Y-S
32
72
BKLT_ADJ
C32
10uF/16V
10R
C48
0.1uF
10K
TC7
VDDC
VDDC
VDDC
VDDC
NC/BA2
NC/BA3
NC/BA4
NC/BA5
NC/BA6
NC/BA7
NC/GA2
NC/GA3
NC/GA4
NC/GA5
LVA3P/GA6
LVA3M/GA7
LVACKP/NC
LVACKM/NC
LVA2P/RA2
LVA2M/RA3
LVA1P/RA4
LVA1M/RA5
LVA0P/RA6
LVA0M/RA7
NC/BB2
NC/BB3
NC/BB4
NC/BB5
NC/BB6
NC/BB7
NC/GB2
NC/GB3
NC/GB4
NC/GB5
NC/GB6
NC/GB7
NC/RB2
NC/RB3
NC/RB4
NC/RB5
NC/RB6
NC/RB7
390_1%
C45
B
RIN0
RIN0M
GIN0
GIN0M
SOGIN0
BIN0
BIN0M
HSYNC0
VSYNC0
GNDC
GNDC
GNDC
GNDC
3
3
3
3
3
3
3
3
RIN
GNDR
GIN
GNDG
SOG
BIN
GNDB
HSYNC
VSYNC
RIN
GNDR
GIN
GNDG
SOG
BIN
GNDB
HSYNC
VSYNC
19
86
96
116
3
3
3
3
3
3
3
3
3
AVDD_PLL
D
AVDD
AVDD
AVDD
AVDD
U3
AVDD_MPLL
MST TSU56AK/16AK
55
65
PBY160808T-600Y-S
VCC3V3
C50
C51
47P
47P
PBY160808T-600Y-S
TC12
C53
C54
10uF/16V
0.1uF
0.1uF
R47
10K
APPROVE BY
Pin 6:LOW- SERIAL BUS
CHECK
BY
PREPARE BY
A
Pin 6:HIGH- DIRECT BUS
Title
MSTAR COSTDWON(DVI_I PIGTAIL) LVDS OUT
Size
Document Number
Custom
Rev
MST SCALER
Date:
5
4
3
2
A
Wednesday, December 01, 2004
1
Sheet
4
of
7
5
4
3
2
1
D
D
JP1
4
4
4
RB4
RB2
LVB2P
4
4
4
4
4
4
4
OCLK
LVB3P
BA6
BA4
BA2
LVACKP
VLCD
GA6
RB4
RXO0+
RB2
RXO1+
LVB2P
RXO2+
OCLK
RXOC+
LVB3P
RXO3+
BA6
RXE0+
BA4
RXE1+
BA2
RXE2+
LVACKP
RXEC+
GA6
RXE3+
VCC_TEST
C59
1
3
5
7
9
11
13
15
17
19
21
23
25
RB5
RB3
LVB2M
ECLK
STV2
BA7
BA5
BA3
LVACKM
GA7
2
4
6
8
10
12
14
16
18
20
22
24
26
RXO0RXO1RXO2RXOCRXO3RXE0RXE1RXE2RXECRXE3-
RB5
4
RB3 4
LVB2M
ECLK
STV2
BA7 4
BA5 4
BA3 4
LVACKM
GA7
4
4
4
4
4
0.1uF
C
C
HEADER 12X2
VCC3V3
VCC3V3
VCC3V3
2,4,6
R49
10K (NC)
VCC_TEST
B
B
FOR 19" FSC PANEL
R50
0(NC)
A
A
APPROVE BY
CHECK
BY
PREPARE BY
Title
MSTAR COSTDWON(DVI_I PIGTAIL) LVDS OUT
Size
Document Number
Custom
Rev
PANEL INTERFACE
Date:
5
4
3
2
Wednesday, December 01, 2004
1
Sheet
A
5
of
7
5
4
MCU
3
2
VCC5V
MCU
R64 R65
R62
C64
VCC5V
LEDO
10K
1
2
R69
1K 1
LEDG R70
1K
R67
MCU
Q6
MMBT3904
3
R68
Q7
MMBT3904
1
MCU
MCU
S10
VCC3V3
3
100 SCL1
100 SDA1
POWER
LED_O
LED_G
DOWN
UP
MENU
AUTO
1
R72
CON1
1
8
2
7
3
6
RN11 22
4
5
1
8
2
7
3
6
4
5
1
2
3
4
5
6
7
8
D
2
24C16
S9
2
10K 10K
R66
RN10 22
330
MCU
8
7
6
5
VCC
WP
SCL
SDA
2
D
A0
A1
A2
GND
C65
RN12
4
3
2
1
4
3
2
1
1
2
3
4
R63
330
U4
.1u
1
VCC5V
to KEY PAD
RN13
D35
ESD
D34
D33 ESD
D32
ESD
D31
ESD
ESD
.1u
10K
XTAL1
20
XTAL2
10
RESET
10u/16V
C68
22pF
C
D10
8.2K
1N41484
14
15
16
17
INT
SCL1
SDA1
2
3
4
5
6
7
8
9
2 PANEL12V_EN
2 PANELVCC_EN
2
7
3
3
3
BKLT_EN
MUTE
DDC_WP
DDC_CLK1
DDC_DAT1
INT0/P3.2
INT1/P3.3
T0/P3.4
T1/P3.5
P1.0
P1.1
P1.2
P1.3
P1.4
P1.5
P1.6
P1.7
10K
5
6
7
8
MCU
P2.0
P2.1
P2.2
P2.3
P2.4
P2.5
P2.6
P2.7
NC
P3.7/RD
P3.6/WR
PSEN
ALE/P
P3.1/TXD
P3.0/RXD
24
25
26
27
28
29
30
31
12
19
18
32
33
13
11
HWRESET
ALE
RDZ
WRZ
AD0
AD1
AD2
AD3
4
4
4
4
4
4
4
4
POWER
DOWN
UP
MENU
AUTO
LEDO
C
ST_DET1
LEDG
RN14
RN15
10K
4
10K
MCU
4
3
2
1
RN6
DDC_DAT
DDC_CLK
3
3
VCC5V
10K
5
6
7
8
RN5
4
3
2
1
8051-PLCC
VSS
.1u(NC)
R74
43
42
41
40
39
38
37
36
22
C69
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
4
3
2
1
EA/VP
21
5
6
7
8
35
4
3
2
1
Y1
10K
5
6
7
8
11.0592MHZ
TC14
44
U5
VCC
MCU
22pF
5
6
7
8
5
6
7
8
10K
C66
MCU
CON2
B
1
2
3
4
B
RS232 debug
NC
APPROVE BY
CHECK
BY
PREPARE BY
A
A
Title
MSTAR COSTDWON(DVI_I PIGTAIL) LVDS&RSDS OUT
Size
Document Number
Custom
Rev
MCU(SYNC&MYSON 512&MX)
Date:
5
4
3
2
Wednesday, December 01, 2004
Sheet
6
1
of
A
7
聯昌電子企業股份有限公司
LC Electronic Co., Ltd.
＊Copy-right LIEN CHANG Electronic Enterprise Co., Ltd.
No copy & disclosure is Allowed. All Right Reserved by LIEN CHANG.
3
4
1
2
聯昌電子企業股份有限公司
LC Electronic Co., Ltd.
7
1
1
2
2
8
8
4
4
6
7
6
3 3
5
5
＊Copy-right LIEN CHANG Electronic Enterprise Co., Ltd.
No copy & disclosure is Allowed. All Right Reserved by LIEN CHANG.
J. PCB LAYOUT DIAGRAM
Main Board
UK513
23 / 26
Control Board
Power Board
Top layer
UK513
24 / 26
Bottom layer
UK513
25 / 26
MEMO
UK513
26 / 26
">
