PAYD PRO PLUS MOBILE SOLUTION

PAYD PRO PLUS MOBILE SOLUTION
S
U
L
P
O
R
N
P
O
I
D
T
Y
U
PA
L
O
S
E
L
I
B
O
M
TM
®MONERIS is a registered trade-mark of Moneris Solutions Corporation. BLUETOOTH is a registered trade-mark of Bluetooth SIG,
Inc. APPLE and IPAD are trade-marks of Apple Inc., registered in the U.S. and other countries. INTERAC is a registered trade-mark
of Interac Inc. ™MONERIS PAYD, MONERIS PAYD BE PAYMENT READY & Design and PAYD PRO PLUS are trade-marks of Moneris
Solutions Corporation. All other marks or registered trade-marks are the property of their respective owners.
© 2015 Moneris Solutions Corporation, 3300 Bloor Street West, Toronto, Ontario, M8X 2X2. All Rights Reserved. This manual shall
not wholly or in part, in any form or by any means, electronic, mechanical, including photocopying, be reproduced or transmitted
without the authorized consent of Moneris Solutions Corporation (“Moneris”). This guide is for informational purposes only.
Neither Moneris nor any of its affiliates shall be liable for any direct, indirect, incidental, consequential or punitive damages
arising out of use of any of the information contained in this guide. Neither Moneris or any of its affiliates nor any of our or their
respective licensors, licensees, service providers or suppliers warrant or make any representation regarding the use or the results
of the use of the information, content and materials contained in this guide in terms of their correctness, accuracy, reliability
or otherwise. Your credit and/or debit card processing is separately governed by the Terms and Conditions of your Moneris VISA
Merchant Agreement, your Moneris MasterCard Merchant Agreement, your Moneris Discover Merchant Agreement and/ or
your INTERAC Merchant and Terminal Agreement (collectively, the “Merchant Agreements”), as applicable with Moneris. It is
the merchant’s responsibility to ensure that proper card processing procedures are followed at all times. Please refer to your
Merchant manuals and the Terms and Conditions of your Merchant Agreement(s) for details. The Moneris Merchant Operating
Manual is available for free download at getpayd.com/paydproplus/support.
Hardware Install Guide
PPPTA _ HWConfig _ V1 _ E (07/15)
(07/15)
Contents
For more information
and assistance:
Web: getpayd.com/paydproplus/support
Email: [email protected]
Toll-free: 1-855-423-PAYD (7293)
Record your
Moneris®
merchant number here:
Introduction
pg. 2
Logging in to the PAYD Pro Plus App
pg. 3
Navigating the interface
pg. 5
Signing out of the PAYD Pro Plus App
pg. 7
Setting up the scanner
pg. 8
Setting up the receipt printer
pg. 11
Connecting the cash drawer
pg. 14
Unpairing devices
pg. 15
Troubleshooting
pg. 16
Other resources
pg. 18
1
Introduction
Logging in to the
PAYD Pro Plus App
PAYD Pro PlusTM lets you turn your Apple® iPad® into a mobile POS Payment
Solution with great features that let you run your business from anywhere.
The first time the PAYD Pro Plus App is launched, you will be prompted to enter
your Moneris PAYDTM login credentials.
This guide provides you with instructions on how to set-up and install the
hardware associated with your PAYD Pro Plus Mobile Solution.
1.Enter the Employee ID, Password and Store ID into the provided fields.
Note: If you are an existing Morris, PAYD®, or PAYD ProTM merchant, enter your
current Moneris PAYD login credentials.
If you are a new merchant, your Moneris PAYD login credentials can be found
in the Confirmation email you received when you registered and/or activated
your Moneris PAYD account.
2
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
3
Navigating the interface
2.Tap Login.
Note: After your first login, the system will prompt you to create a quick PIN
for login (“Enter a PIN to login faster next time”). Enter a 4-digit PIN and tap
the checkmark button. Refer to the PAYD Pro Plus Mobile Solution
Configuration Guide for more information on configuring quick PINs. This
guide is available for free download at getpayd.com/paydproplus/support.
Note: The app will always appear in “landscape” orientation, even if the Apple
iPad is tilted into a “portrait” orientation.
Accessing the main menu
• To access the main menu from any screen, tap the Main Menu button (
The main menu appears on the left side of the screen (shown below).
).
Note: If the system prompts you to Cash-In, tap the cancel button ( ) for
now. Refer to the PAYD Pro PlusTM Mobile Solution – Using PAYD Pro Plus for
Apple® iPad guide for instructions on how to cash in. This guide is available for
free download at getpayd.com/paydproplus/support.
Note: If you tap Register, the Starter Account Registration page appears.
If you have not already registered your app with Moneris, please do so now
by following the on-screen instructions and filling out the fields highlighted
in yellow. If you have already registered your app, tap the Cancel button.
4
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
5
Signing out of the
PAYD Pro Plus App
• To hide the main menu:
• Tap the Main Menu button (
) again.
OR
• Tap one of the menu options e.g. Customers.
The panes
The PAYD Pro Plus App is generally divided into two panes (referred to in this
guide as the “left pane” and the “right pane”). Menus and popups slide in from
the left or right side of the screen, but generally the two panes remain visible
(one pane becomes smaller depending upon which side of the screen displays
a menu or popup).
When you are finished using the PAYD Pro Plus App, follow the instructions
below to sign out.
1.Tap the Main Menu button (
).
2.On the main menu, tap Sign Out.
A confirmation popup appears.
3.Tap Yes to sign out.
The Login screen appears.
The on-screen keyboard and number pad
The PAYD Pro Plus App makes use of the Apple iPad’s on-screen keyboard for data
entry (i.e. customer or product names). Use this on-screen keyboard in the PAYD
Pro Plus App just like you would in any other Apple iPad app. The PAYD Pro Plus
Mobile Solution can use its own number pad, or use the Apple iPad’s on-screen
keyboard for numeric data entry too. When your data entry is finished, tap OK or
Return to finalize your input. The keyboard is hidden again.
6
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
7
Setting up the scanner
Follow the instructions below to set up the Bluetooth® scanner.
1. Unpack the scanner from its packaging.
2. Locate the scanner’s documentation included in its box.
3. Follow the applicable manufacturer’s instructions to insert the batteries,
attach the lanyard and charge the scanner.
4. Login to the PAYD Pro Plus App. Tap
iPad’s main screen.
5. Tap the Main Menu button (
(the app’s icon) on the Apple
).
6. On the main menu, tap Settings.
7. On the Settings menu, tap Devices.
8. On the right pane, in the Barcode Scanner section, slide the Barcode Scanner
slider to the right to enable it.
9. Tap the Setup button.
A Scanner Configuration popup appears.
10.Configure the scanner:
IMPORTANT: Keep the scanner’s documentation for future use. It contains special
barcodes that are used for scanner programming.
Note: A Bluetooth scanner can only be paired with one Apple iPad at a time.
If you need to pair the scanner with another Apple iPad, first unpair the scanner
from the Apple iPad to which it is currently paired. Refer to the Unpairing devices
instructions on page 15 for more information.
8
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
a.Scan the barcode labelled Step 1 Reset Factory Defaults. The scanner beeps
and powers off.
b.Power the scanner on again.
c.Scan the barcode labelled Step 2 Set to iOS Mode.
d.Close the PAYD Pro Plus App and proceed to step 11.
9
Setting up the receipt printer
11.Pair the scanner with your Apple iPad:
Follow the instructions below to set up the Bluetooth receipt printer with your
Apple iPad.
a.Access the Apple iPad’s Settings screen.
b. Ensure that your Apple iPad’s Bluetooth menu is open, that Bluetooth
is enabled, and that the Apple iPad is configured to be “discoverable”
by another Bluetooth ready device.
c.On your Apple iPad’s Bluetooth menu, tap the scanner’s name (e.g. “Socket
CHS”) in the MY DEVICES list.
d.Wait while the tablet pairs with the scanner. You should receive notification
of a successful pairing e.g. you should see the scanner name and status
showing “Connected”.
12.Login to the PAYD Pro Plus App again. Tap
Apple iPad’s main screen.
(the app’s icon) on the
).
14.On the main menu, tap Settings.
15.On the Settings menu, tap Devices.
16.In the right pane of the Devices screen, the barcode scanner will be
automatically detected and the status will change from “No Barcode Scanner
connected” to “Barcode Scanner connected”.
17.Tap the Main Menu button (
NOTE: A Bluetooth receipt printer can only be paired with one Apple iPad
at a time. If you need to pair the printer with another Apple iPad, first unpair
the printer from the Apple iPad to which it is currently paired. Refer to the
Unpairing devices instructions on page 15 for more information.
1. Unpack the receipt printer from its packaging.
2. Connect the printer’s power cable(s) and insert the paper roll following the
manufacturer’s instructions as applicable.
e.Proceed to step 12.
13.Tap the Main Menu button (
IMPORTANT: Keep the printer’s documentation for future use. It contains
instructions for installation and auto-connection that may be required in
the future.
3. Pair the printer with your Apple iPad:
a.Power on your printer.
b.Power on your Apple iPad.
c.Go into the Apple iPad’s Settings menu.
d.Ensure that your Apple iPad’s Bluetooth menu is open that Bluetooth
is enabled, and that the Apple iPad is configured to be “discoverable” by
another Bluetooth ready device.
). The system will save the configuration.
The scanner is ready to use with the PAYD Pro Plus App. If you encounter any
problems, refer to the Troubleshooting section on pages 16 and 17.
10
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
11
e.On the rear of the printer, hold down the red PAIR button for 5 seconds
until the LED flashes green. You have 60 seconds to pair the printer to the
Apple iPad.
i. On your Apple iPad’s Bluetooth menu, tap the printer’s name
(e.g. “Star Micronics”) in the MY DEVICES list.
ii.Wait while the Apple iPad pairs with the printer. You should receive
notification of a successful pairing e.g. you should see the printer name
and status showing “Connected”.
f.Proceed to step 4.
4. After pairing, power off the printer and turn it back on to complete the
connection.
5. Login to the PAYD Pro Plus App. Tap
iPad’s main screen.
6. Tap the Main Menu button (
(the app’s icon) on the Apple
12.To configure the settings to control when the drawer opens, select one of
the following options from Cash Drawer Open Settings:
• On demand – select this option to open the drawer only on demand.
This is the default setting.
• On cash sale – select this option to open the drawer only when cash is
used for payment.
• On any sale – select this option to open the drawer for every sale.
• On cash sale and on demand – select this option to open the drawer only
when cash is used for payment, or on demand.
• On any sale and on demand – select this option to open the drawer for
every sale, or on demand.
13.Tap an area in the left pane to save your changes.
).
7. On the main menu, tap Settings.
The receipt printer is ready to work with the PAYD Pro Plus App. If you encounter
any problems, refer to the Troubleshooting section on pages 16 and 17.
8. On the Settings menu, tap Devices.
9. On the right pane, under the Receipt Printer section, slide the Receipt Printer
slider to the right to enable it.
10.Tap the Connect button. The status will change from “No Printer connected”
to “Printer connected”.
11.If you have a cash drawer connected, proceed to step 12. If you are not using
a cash drawer with your receipt printer, proceed to step 13.
12
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
13
Connecting the cash drawer
Unpairing devices
The cash drawer connects to the back of the receipt printer (via the cable
provided with the drawer). When a receipt is printed, the drawer receives
a command to open from the receipt printer. Follow the instructions below
to connect the drawer to the printer.
It may become necessary to unpair a device from your Apple iPad in order to
pair it to another Apple iPad. Use the steps below as a guide for performing
this task.
Note: The cash drawer does not need to be paired with the Apple iPad or with
the PAYD Pro Plus App. The drawer only connects to the receipt printer therefore
it does not require Bluetooth pairing.
1.Unpack the drawer from its packaging. Store the keys somewhere safe.
2.Ensure you situate the drawer on a flat, stable surface.
3.Connect the cable to the drawer following the manufacturer’s instruction.
4.Connect the other end of the cable to the appropriate port on the back of the
receipt printer.
1.Close out of the PAYD Pro Plus App.
2.Tap the Settings menu on the main screen.
3.In the Settings menu, tap Bluetooth.
4.In the Bluetooth menu, in the MY DEVICES list, tap the
device name.
i
icon next to the
5.Tap Forget This Device. A confirmation popup appears.
6.Tap OK.
5.To configure when the software will command the printer to open the drawer,
refer to step 12 in the Setting up the receipt printer section on page 13.
14
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
15
Troubleshooting
If a problem occurs, try restarting the Bluetooth device and closing and
reopening the PAYD Pro Plus App. If the problem continues to occur, and the
scenario appears in the table below, follow the instructions in the table’s
Resolution column. If the problem is still not resolved, call the Moneris
Merchant Service Centre toll-free at 1-855-423-PAYD (7293).
Scenario
Resolution
The receipt printer is not
powered on.
1. E
nsure that the power cable is connected to the back
of the printer and is plugged into a working power
source.
2. T
urn the printer on using the power switch on the
side of the printer.
3. C
onsult the printer’s documentation for further
information.
The receipt printer is not
showing up in the list of
devices in my Bluetooth®
menu.
1. Ensure the printer is powered on.
2. T
urn off and turn on Bluetooth on your Apple iPad
to see if the list of Bluetooth devices refreshes and
displays the printer.
Scenario
Resolution
The scanner is not
producing a red beam.
1. E
nsure that the scanner battery is installed correctly
and that the battery has been charged according to
the manufacturer’s instructions.
2. P
ress the smaller round button on the top of the
scanner. The scanner should beep twice.
3. P
ress the large ovular trigger button on the top of
the scanner to see if a red light appears.
4. I f that doesn’t work, refer to the manufacturer’s
instructions.
I connected my cash
drawer to my printer,
but the drawer is not
opening.
The drawer only opens when transactions are
performed and receipts are printed. If you are not
doing a transaction at the moment, the drawer will
remain closed.
I completed a
transaction, but the
drawer did not open.
1. E
nsure the drawer is properly connected to the
receipt printer.
3. Ensure the drawer is not locked.
3. H
old down the red PAIR button on the back of the
printer. Check the device list to see if the printer
name appears.
My scanner is not
showing up in the list of
devices in my Bluetooth
menu.
1. E
nsure that the scanner battery is installed correctly
and that the battery has been charged according to
the manufacturer’s instructions.
2. F ollow the instructions in the Setting up the scanner
section on page 8 in this guide.
3. I f it is still not working, try to reset the scanner back
to factory defaults and try configuring it again. Scan
the Reset to Factory Default barcode in the Scanner
Configuration section of the Device Settings screen.
Refer to the Setting up the scanner section on page 8
in this guide for more help.
16
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
2. Ensure the printer is powered on.
4. R
efer to step 12 in the Setting up the receipt printer
section for instructions on configuring the times
at which the drawer is supposed to open.
My device is paired to
the Apple iPad, but
in the app, the device
status symbol shows Not
Connected (
).
1. Tap the Main Menu button (
2. On the main menu, tap Settings.
).
3. On the Settings menu, tap Devices.
4. I n the Devices screen, the right pane displays the list
of supported Bluetooth devices.
5. T
ap Connect beside the device that is not currently
shown as connected.
6. The symbol should change to “Connected” (
).
17
Other resources
Notes
There are other documents you can use for assistance with the PAYD Pro Plus
Mobile Solution.
________________________________________________________________
• Refer to the Moneris PAYD PIN pad Setup Guide for instructions on setting
up and pairing the Moneris PAYD Pin pad with your Apple iPad.
TM
• Visit getpayd.com/paydproplus/support for a list of FAQs pertaining to setting
up and operating both the PAYD Pro Plus Mobile Solution and PAYD Pro Plus
In-Store Solution
• Visit getpayd.com/paydproplus/support to download the PAYD Pro PlusTM
Mobile Solution – Configuration Guide and the PAYD Pro PlusTM Mobile Solution
– Using PAYD Pro Plus for Apple® iPad guide.
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
18
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
19
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
20
PAY D P R O P L U S M O B IL E S OL U T I O N H A R D WA R E INS TA L L GUIDE
21
S
U
L
P
O
R
N
P
O
I
D
T
Y
U
PA
L
O
S
E
L
I
B
O
M
TM
®MONERIS is a registered trade-mark of Moneris Solutions Corporation. BLUETOOTH is a registered trade-mark of Bluetooth SIG,
Inc. APPLE and IPAD are trade-marks of Apple Inc., registered in the U.S. and other countries. INTERAC is a registered trade-mark
of Interac Inc. ™MONERIS PAYD, MONERIS PAYD BE PAYMENT READY & Design and PAYD PRO PLUS are trade-marks of Moneris
Solutions Corporation. All other marks or registered trade-marks are the property of their respective owners.
© 2015 Moneris Solutions Corporation, 3300 Bloor Street West, Toronto, Ontario, M8X 2X2. All Rights Reserved. This manual shall
not wholly or in part, in any form or by any means, electronic, mechanical, including photocopying, be reproduced or transmitted
without the authorized consent of Moneris Solutions Corporation (“Moneris”). This guide is for informational purposes only.
Neither Moneris nor any of its affiliates shall be liable for any direct, indirect, incidental, consequential or punitive damages
arising out of use of any of the information contained in this guide. Neither Moneris or any of its affiliates nor any of our or their
respective licensors, licensees, service providers or suppliers warrant or make any representation regarding the use or the results
of the use of the information, content and materials contained in this guide in terms of their correctness, accuracy, reliability
or otherwise. Your credit and/or debit card processing is separately governed by the Terms and Conditions of your Moneris VISA
Merchant Agreement, your Moneris MasterCard Merchant Agreement, your Moneris Discover Merchant Agreement and/ or
your INTERAC Merchant and Terminal Agreement (collectively, the “Merchant Agreements”), as applicable with Moneris. It is
the merchant’s responsibility to ensure that proper card processing procedures are followed at all times. Please refer to your
Merchant manuals and the Terms and Conditions of your Merchant Agreement(s) for details. The Moneris Merchant Operating
Manual is available for free download at getpayd.com/paydproplus/support.
Hardware Install Guide
PPPTA _ HWConfig _ V1 _ E (07/15)
(07/15)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement