Samsung BN68-02879E-X0 Quick Setup Guide


Add to my manuals
2 Pages

advertisement

Samsung BN68-02879E-X0 Quick Setup Guide | Manualzz

Quick Setup Guide

To register this product please visit www.samsung.com/register.

Installing the LED TV Stand

See separate guide for installing the stand.

s s s s s

(A)

(B)

5EA (M4 X L12)

5EA (M4 X L8)

Stand (1EA) Guide Stand (1EA) Screws (10EA)

List of Parts

1 2 3 4

Follow the steps below to connect the TV to the stand.

Screws (M4 X L12)

Top view

(M4xL8) s s s

2 s s Guide Stand

Stand s s

5 6 7 s s s s s s s s

1

Rear

1 Remote Control & Batteries (AAA x 2) 2 Power Cord

3 Cleaning Cloth 4 Blanking Bracket

5 Data Cable (BN39-00865B, BN39-01011B) 6 Stand & Screw (M4xL16)

7 Warranty Card / Safety Guide (Not available in some locations)

1

6

2

7

3

8

4

9

5

0

1 Holder-Wire Stand

4 Holder-Ring (4EA)

7 AV Adapter

(Aus, Singapore, NZ only)

0 SCART Adapter

(EU, Mideast Africa only)

2 Cable Tie

5 Power Cord Clamp

8 Audio Adapter

(Aus, Singapore, NZ only)

3 Holder-Wire (3EA)

6 Component Adapter

9 AV Adapter

1. Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown.

2. With your TV upright, connect the TV to the

Stand as shown.

3. Fasten two screws (M4

X L8) at position 1 , and then fasten three screws

(M4 X L8) at position 2 .

NOTE 1

x

Make sure to distinguish between the front and back of the Stand and Guide

Stand when assembling them.

2

x

Make sure that at least two persons lift and move the LED TV.

x

Stand the product up and fasten the screws. If you fasten the screws with the

LED TV placed down, it may lean to one side. 3

4

5

BN68-02879E-X0

Viewing the Connection Panel

@ !

0 9 8 7 6 4

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on a wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the

Blanking Bracket

1 wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own.

2

3 ➣ Remove the stand and cover the bottom hole with the cover.

@

@

!

!

0

0

9 8

9 8

7

7

6

6

4

4

4

5

1

2

$

%

4

5

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

➣ Standard dimensions for wall mount kits are shown in the table below.

➣ When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

➣ Do not use screws that do not comply with the VESA standard screw specifications.

➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

➣ For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

➣ Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

➣ Samsung is not liable for product damage or personal injury when a non-

VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

➣ Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.

➣ Do not mount the TV at more than a 15 degree tilt.

➣ Always use two people to mount the TV to a wall.

Product

Family

LED TV

[Ultra-Slim] inches

19 ~ 22

23 ~ 29

32~37

40~55

56~65

VESA Spec.

(A * B)

75 X 75

200 X 100

200 X 200

400 X 400

600 X 400

Standard

Screw

M4

Quantity

M8

4

Do not install your Wall Mount Kit while your TV is turned on.

It may result in personal injury due to electric shock.

EU Hotel (4000)

Power Input

@ !

0 9 8 7 6 4

1

2

3

4

5

1

2

$

%

Mideast Africa Hotel (4000)

Power Input

@ !

0 9 8 7 6 4

1

2

4

5

1

2

#

$

%

$

%

Aus, NZ, Singapore Hotel (4000)

Power Input

@ !

0 8 7 7 6 4

1

2

#

$

%

4

5

1 RJP

2 USB (HDD) / CLONING

3 COMMON INTERFACE

4 HDMI IN 1(DVI), 2

5 PC / DVI AUDIO IN

6 PC IN

7 COMPONENT IN

8 AV IN

9 EXT(RGB)

0 ANT IN

! DATA

- Used to support data communication between the TV and the SBB.

@ Power input

# AV OUT

- AUDIO OUT

- VIDEO OUT

(DTV signal is unsupportable. This output is only for Analogue video signal.)

$ Headphones jack

% HP-ID

4

5

4

5

@ !

0 8 7 7 6 4

@ !

0 9 8 7 6 4

[QSG]BN68-02879E-Hotel.indd 1

4

5

#

$

%

1

2

2010-04-13 오전 10:04:33

@ !

0 8 7 7 6 4

ETH MODEM

ETH MODEM

Connecting the TV with SBB

EU Hotel (4000)

ETH MODEM

Hotel Server

STB(Set Top Box) or SBB (Set Back

Box)

ETH MODEM

Data Cable

Mideast Africa Hotel (4000)

Hotel Server

STB(Set Top Box) or SBB(Set Back

Box)

ETH MODEM

Data Cable

TV Rear Panel

TV Rear Panel

Aus, NZ, Singapore Hotel (4000)

Hotel Server

STB(Set Top Box) or

SBB (Set Back Box)

ETH MODEM

Data Cable

TV Rear Panel

1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.

➣ Use data communication.

List of Vendors for Compatible Data Cables Supplied with the TV

♦ Refer to the code label on the data cables.

Confirm the code on the Code Label

Hotel Plug & Play

Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup once.

- Hotel Plug & Play is available only one time when power is first turned ON.

- After setting up first TV and Clone TV to USB

- Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.

♦ UI Scenario

Press Power OFF to exit.

Hotel Plug & Play

Easy Set Up

Interactive Standalone Plug & Play Standalone Only

If Standalone Plug & Play

is selected

Hotel Plug & Play

Select the OSD Language.

Menu Language : English r

Enter

Standalone

Hotel Option Menu

If Standalone Only is selected

Standalone Only mode is set

TV will enter the RF mode.

If Interactive is selected

Interactive

Hotel Option Menu

Press Power OFF to exit.

Hotel Plug & Play

Select Country.

Country : United Kingdom r

A

Previous Enter

<Depending on Region, this step may not exist.>

Hotel Plug & Play

Dynamic

Standard

A Previous U Move Exit

Hotel Plug & Play

Antenna Source

Channel Source

A

Previous

: Air r

: Digital & Analogue

D

Search

Skip U Move Exit

After Searching the channels.

U

Hotel Plug & Play

Set the Clock Mode.

Clock Mode : Auto r

A Previous

D

Skip Exit

ETH MODEM

Mixed Channel Map

Mixed Channel Map is a function to mix Air and Cable channels.

[ If there are no Cable channels, you can use this item as channel sorting. ]

- Mixed channel Map, Channel Editor and Channel Auto Store are newly placed

in Hotel Option Menu.

- Mixed channel Map should be ON in order to mix Air and Cable channels.

- Use Channel Editor to sort the channels as user-desired channel numbers.

Hotel Mode

SI Vendor

Power On Channel

ETH MODEM

Power On Volume

Min Volume

Max Volume

Panel Button Lock

Power On Source

Picture Menu Lock

Channel Editor

Music Mode AV

Music Mode PC

Music Mode Comp

OFF

OFF

OFF

OFF

ON

OFF

1

ATV

10

0

100

Unlock

TV

OFF

RJP Priority AV

RJP Priority PC

RJP Priority HDMI

RJP AV Option

RJP HDMI Option

Sub AMP Volume

Sub AMP Mode

Local Time

Time Format

PMOLED Test

PMOLED Mormal Dim.

PMOLED Standby Dim.

Audio Loop In

Menu Display

1

2

3

Logo Download

Logo Display Time

Power On Option

Auto Source AV1

HDMI1/DVI Energy Saving

6 Clone : TV to USB

2

Manual

Clone : USB to TV

Pan Euro MHEG

12 Hour

Failure

3

2

OFF

ON

Cloning Data Reset

Welcome Message

Edit Welcome Message

DC Power Out

Mixed Channel Map

Channel Auto Store

...

...

Last Option

OFF

Off

OFF

OFF

5V

ON

Hotel Logo OFF Dynamic SI OFF

<Depending on model and region, some menu items may not exist>

Simple Steps for channel mixing under Stand-alone Mode

5

6

3

4

Step

1

2

Broad Outline

Turn on ‘Mixed Channel Map’ in Hotel Option Menu

Operate ‘Channel Auto Store’ in Hotel Option Menu

(Antenna Source : Air + Cable)

Enter ‘Channel Editor’ in Hotel Option Menu

Compile a table related to the final channel lists you want to have

Rearrange channels with TOOLS Button based on the table you compiled

Press EXIT or RETURN Button to exit.

<For better comprehension, please refer to the following details>

Specifications

Items

TV System

Speaker out

Specification

ATSC / NTSC3.58

26inch : 5W x 2

32inch : 10W x 2

Comment

Audio out

DC out

Variable Audio 4W X 1, 8 ohm SPK’

Audio out

12V out

500mVrms

Max 1.5A

RCA Jack output

OTL Sound output

Phone Jack, Monitor out

Change output voltage

Input

Data

Component Y, Pb, Pr, Audio-L/R

PC D-sub, Audio-L/R

A/V

EXT

HDMI

Audio Video Jack

Scart Jack

(EU, Mideast Africa Only)

Compatible with the HDMI

Specifications

Antenna

DATA

Ex-Link

Operating temperature

Operating Humidity

Storage Temperature

Storage Humidity

DVI is Supported

75 ohm Unbalanced, Din Jack VHF/UHF/CATV

RJ-12

RS232

Jack Pack Only,

TeleAdapt RJP Only

50°F ~ 104°F(10°C ~ 40°C) non-condensing 10% ~ 80%

-4°F ~ 113°F(-20°C ~ 45°C )

5% ~ 95% non-condensing

➣ Design and specifications are subject to change without prior notice.

➣ For the power supply and Power Consumption, refer to the label attached to the product.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country

AUSTRIA

FINLAND

FRANCE

GERMANY

HUNGARY

ITALIA

NETHERLANDS

POLAND

PORTUGAL

SPAIN

UNITED KINGDOM

SOUTH AFRICA

U.A.E

AUSTRALIA

Customer Care Centre

800-112233

0771-400002

0825-022062

01805-471101

0640-985985

800-194194

015-2197000

0-801-B2BSAM (222726)

808-B2BSAM

0902024-010

+44 (0) 845 8414141

0860-SAMSUNG(726-7864)

800-SAMSUNG (726-7864)

8000-4726

1300 362 603

NEW ZEALAND

SINGAPORE

0800 SAMSUNG (726-786)

1800-SAMSUNG (726-7864)

[QSG]BN68-02879E-Hotel.indd 2 2010-04-13 오전 10:04:35

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement