Samsung CT-21Z45ML User manual

COLOUR TELEVISION
CT21Z43/21Z45/21Z47/21Z50/
21Z55/21Z57/21Z58/21AJ0/
21AE0/21AF0/21AM0
Owner’s Instructions
Connection Panel (depending on the model)
Front (or Side) Panel
➢ The product color and shape may vary depending on the
model.
1
2
4
3
Before operating, please read this manual thoroughly,
and retain it for future reference.
1
2
3
2
1
1
3
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
2
4
1
Control Panel (depending on the model)
1
Rear Jack
3
2
2
3
1 Audio input
2 Video inpout
3 Headphone jack
➢ The product colour and shape may vary depending on the
model.
1
Front (or Side) Panel
4
1
2
2
☛ Please be sure to match the colour coded input terminals
1
2
3
4
5
6
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Standby indicator
Power on/off
 You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
 The 2 and 3 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
and cable jacks.
you connect an audio or video system to your
➢ Whenever
television, ensure that all elements are switched off.
Connecting to the RCA Input
Please be sure to match the colour coded input terminals
and cable jacks.
1Audio/Video Output Jacks
Connect to the audio/video input jacks of a recording VCR.
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for
equipment, such as a camcorder, video disc player, or video
game device.
2Audio/Video Input Jacks
Connect to the audio/video output jacks of VCRs, DVD players
and similar devices.
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
3Component Video Input Jacks (Y, PB, PR)
Connect to the Component video outputs of a DVD or DTV
set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
Connecting to the Headphones
➢ When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
4ANT IN
Connect to an antenna or to a cable TV system.
English - AA68-04004A-01Eng_0724.indd 1
AA68-04004A-01
2008-07-24 오전 11:39:03
Remote Control (depending on the model)
➢ Operation of remote control may be affected by bright
artificial light near to the TV.
➢ This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and
Volume buttons.
Turning the TV On and Off
1 POWER
Turns the TV on and off.
2 Number buttons
Press to select channels
directly on the TV.
3 –
Press to select channels
over 100. For example,
for channel 122, press
“-”, then “2”, then “2”.
4 VOL +, VOL Press to increase or
decrease the volume.
5 MENU
Displays the main
on-screen menu.
6 ▲/▼/◄/►
Controls the cursor in
the menu.
7 ENTER
While using the
on-screen menus, press
ENTER to activate (or change) a particular
item.
8 P.MODE
Used to select the
picture effect.
9 MTS
(Multi-channel Television
Sound)
Press to choose
“Stereo”, “Mono”, or
“SAP” (Secondary Audio
Program).
0 R.SURF
Press to automatically
return to a preferred
channel after a
userpreset time delay.
! SOURCE
Press to display all
of the available video
sources.
@ INFO
Press to display
information on the TV
screen.
# PRE-CH
Tunes to the previous
channel.
$ CH , CH
Press to change
channels.
% EXIT
Press to exit the menu.
^ MUTE
Press to temporarily cut
off the sound.
& SLEEP
Press to select a
preset time interval for
automatic shut off.
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Caution: One pole switch is totally not off(one line still live)
if power cord is not unplugged.
➢
Viewing the Menus
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: “Input”, “Picture”, “Sound”, “Channel”, and
“Setup”.
2
Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu.
3
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4
Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5
Press the EXIT button to exit from the menu.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
➢
English - AA68-04004A-01Eng_0724.indd 2
2008-07-24 오전 11:39:04
Setup - Plug & Play (depending on the model)
Input - Source List (depending on the model)
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
1
2
3
Press the POWER button on
the remote control.
The “Start Plug & Play.” is
displayed. Press the ENTER
button, then the “Check
antenna input.” is displayed.
Make sure that the antenna
is connected to the TV.
Press the ENTER button,
then the “Auto Program” is
displayed.
Press the ENTER button
to start. The TV begins
memorizing all available
channels. Press the ENTER
button to stop.
4
Plug & Play
Start Plug & Play.
OK
Enter
Exit
5
After all available channels
are stored, the “Clock Set”
is displayed.
Press the ◄ or ► button to
move to the hour or minute.
Set the clock by pressing
the ▲ or ▼ button.
When you have finished,
press the MENU button.
The “Enjoy your watching.”
is displayed.
Plug & Play feature
doesn’t work in the AV
mode.
Clock Set
12 : 00 am
Move
Adjust
Enter
Skip
➢
Enjoy your watching.
OK
➢
Plug & Play
Check antenna input.
Source List
 Source List
TV
You can switch between
AV1
viewing signal from
AV2
Component
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
Move
Return
Enter
(broadcast or cable).
Press the SOURCE
button on the remote control repeatedly to select the
desired signal source.
Plug & Play
OK
Enter
Skip
Re-setting the Plug & Play
Method:
MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play) 
ENTER
Plug & Play
Auto Program
Air 3
3%
Setup
Plug & Play
Language
: English
Time
Caption
: Off
Child Lock
Blue Screen : On
Stop
Enter
Skip
Move
continued...
Enter
►
►
►
►
►
►
Return
English - AA68-04004A-01Eng_0724.indd 3
2008-07-24 오전 11:39:05
Channel - Memorizing the Channels
Channel - Fine Tune
Sleep Timer
Your TV can memorize and store all of the available channels
for both “off-air” (antenna) and cable channels. After the
available channels are memorized, use the CH
and CH
buttons to scan through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
“Air/Cable”, “Auto Program” and “Add/Delete”.
The Fine Tuning function lets
you manually adjust the TV’s
Fine Tune
tuner if you have difficulty tuning
P3
0
channels.
Reset
Adjust the fine tuning by pressing
Move
Save
the ◄ or ► button.
Adjust
Return
To store the fine tuning setting
in the TV’s memory, press the
ENTER button.
To reset the fine tuning to “0”, select ”Reset” by pressing the
▲ or ▼ button, then press the ENTER button.
You can select a time period of
between 30 and 180 minutes
after which the TV automatically
switches to standby mode.
Press the SLEEP button on the
remote control repeatedly until the
appropriate time interval appears
(any of the preset values from “30
Min.” to “180 Min.”).
Setup - Time
Setup - Caption (depending on the model)
Channel
 Air/Cable
Air/Cable
:Air
►
Before your TV can begin
Auto Program
►
memorizing the available
Add/Delete
►
Fine
Tune
►
channels, you must specify
the type of signal source
that is connected to the TV
Move
Adjust
Return
(i.e., an antenna or a cable
system).
Select “Air” or “Cable” by pressing the ◄ or ► button.
 Auto Program
All available channels are
automatically stored in
memory when channels are
selected by the direct tuning
function.
Press the ENTER button
at any time to interrupt the
memorization process.
 Add/Delete
You can add or delete
a channel to display the
channels you want only. To
use the “Add/Delete” function,
first run Auto Program.
Select “Deleted” or “Added”
by pressing the ENTER
button.
Search
Air 3
3%
Stop
Enter
Return
Add/Delete
▲ More
2
3
4
5
6
▼ More
Move
: Added
: Deleted
: Deleted
: Deleted
: Deleted
Enter
 Clock
Setting the clock is
necessary in order to use the
various timer features of the
TV. Also, you can check the
time while watching the TV.
(Just press the INFO button.)
Time
Clock
On Timer
Off Timer
Move
-- : -- am
-- : -- am Off
-- : -- am Off
Enter
Return
 On Timer / Off Timer
You can set the On/Off timers so that the TV will switch on
or off automatically at the time you select.
You must set the clock first.
➢
Return
☛ Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
“On” mode and prevents overheating or leakages, which
may occur if a TV is on for too long.
30 Min.
Your TV decodes and displays
Setup
the closed captions that are
Plug & Play
►
Language
: English
►
broadcast with certain TV shows.
Time
►
Caption
: On
►
These captions are usually
Child Lock
►
subtitles for the hearing impaired
Blue Screen : On
►
or foreign-language translations.
All VCRs record the closed
Move
Return
Enter
caption signal from TV programs,
so home-recorded video tapes
also provide closed captions. Most pre-recorded commercial
video tapes provide closed captions as well. Check for the
closed caption symbol in your TV schedule and on the tape’s
packaging: C C .
 Caption: On/Off
You can activate or deactivate the “Caption” function.
English - AA68-04004A-01Eng_0724.indd 4
2008-07-24 오전 11:39:06
Setup - Child Lock
Setup - Language / Blue Screen
This feature allows you to
Child Lock
Child Lock
: On ►
prevent unauthorized users,
Channel
: P 11
such as children, from watching
Lock
: ?
unsuitable programmes by
muting out video and audio. Child
Lock cannot be released using
front (or side) panel buttons.
Move
Return
Enter
Only remote control can release
the Child Lock setting, so keep the remote control away from
children.
 Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select the
language which will be used
for displaying menus and
indications.
 Child Lock : On/Off
You can activate or deactivate the Child Lock function.
 Channel : Channel number to be locked.
 Lock : When press the ENTER button, the “Locked” is
displayed.
➢ If any channel is locked, you can not access to the
Picture - Mode
(depending on the model)
Setup
Plug&Play
Language
: English
Time
Caption : Off
Child Lock
Blue Screen : On
Move
Enter
►
►
►
►
►
►
Return
 Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
“Channel” and “Child Lock” menu by using the control
buttons on the TV panel (the “Not Available” is displayed
in the “Child Lock” menu). You can access by using the
remote control only.
 Mode:
Dynamic / Standard / Movie
/ Custom
You can select the type
of picture which best
corresponds to your viewing
requirements.
Mode
Mode
: Dynamic ►
Contrast
:100
Brightness
:
50
Sharpness
:
75
Tint
: G 50 R 50
Color
:
50
Colour Tone
: Cool1 ►
Reset ►
Move
Adjust
Return
 Contrast / Brightness / Sharpness / Color / Tint (NTSC
only)
The TV has several settings which allow you to control the
picture quality.
 Color Tone: Cool2 / Cool1 / Normal / Warm1 / Warm2
You can change the color of the entire screen according to
your preference.
 Reset
You can retum to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
R.Surf Feature (depending on the model)
This feature allows you to set
the TV to return to a particular
channel after a certain amount of
time. For example, you may be
watching a channel when
commercials start. You can set
Surf
00: 29
the R.Surf to “5 minutes”, then
switch channels. After minutes,
the TV will return to the original
channel.
Press the R.SURF button on the remote control repeatedly to
set the timer in thirty second intervals, up to five minutes.
Picture - Digital NR / DNIe Jr
(depending on the model)
 Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear on
the screen.
Picture
Mode
Digital NR
DNIe Jr
Move
: Dynamic ►
:
Off ►
:
Off ►
Enter
Exit
 DNIe Jr
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
English - AA68-04004A-01Eng_0724.indd 5
2008-07-24 오전 11:39:06
Sound - Mode / Adjust / Auto Volume /
Turbo Sound (depending on the model)
 Mode : Standard / Music /
Movie / Speech / Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
Sound
Mode
: Custom
Adjust
Auto Volume
: Off
Turbo Sound
: Off
Move
Adjust
►
►
►
►
Return
 Adjust : Bass / Treble / Balance
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the sound
mode is automatically switched to “Custom”.
➢
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
 Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
Troubleshooting
Cleaning and Maintaining Your TV
If the TV seems to have a problem, first try this list of possible
problems and solutions. If none of these troubleshooting tips
apply, then call your nearest Samsung authorized service center.
Please follow the guidelines to get the maximum performance
from your TV.
Poor picture.
 Do not Place the TV near extremely hot, cold, humid or
dusty places.
 Do not place TV near appliances with electric motor that
create magnetic fields, such as vacuum cleaners.
 Keep the ventilation openings clear; do not place TV on a
soft surface, such as cloth or paper.
 Place the TV in a vertical position only.
 Try another channel.
 Adjust the antenna.
 Check all wire connections.
Poor sound quality.
 Try another channel.
 Adjust the antenna.
No picture or sound.





Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
No color, wrong colors or tints.
 Make sure the program is broadcast in color.
 Adjust the picture settings.
Picture rolls vertically.
 Adjust the antenna.
 Check all wire connections.
 If you are using a VCR, check the tracking.
The TV operates erratically.
 Unplug the TV for 30 seconds, then try operating it again.
Your remote control does not operate your TV.
Sound - MTS (Multi-channel Television Sound)
(depending on the model)
Depending on the particular
program being broadcast, you
cannot listen to “Mono”, “Stereo”.
Only when the TV is set in AV
mode, press the MTS button on
the remote control repeatedly
to select “Stereo”, “Mono”, or
“SAP(Secondary Audio Program).
AV
Mono
 Make sure the remote has batteries.
 Check that the “+” and “-” ends of the batteries are
inserted correctly.
 Check that the batteries are drained.
Placement
Liquids
 Do not handle liquids near or on the TV. Liquid that spills
into it can cause serious damage.
Cabinet
 Never open the cabinet or touch the parts inside.
 Wipe your TV with a clean, dry cloth. Never use water,
cleaning fluids, wax or chemicals.
 Do not put heavy objects on top of the cabinet.
Temperature
 If your TV suddenly move from a cold to a warm place,
unplug the power cord and allow at least two hours for
moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
 If you plan to take the TV with you to a foreign country
please be aware of a different television systems that
are in use around the world. A TV designed for one
system may not work properly with another system due to
differences in the TV channel frequencies.
➢ Note: Main plug serves as the disconnect device during
servicing and shall be readily operable.
The TV won’t turn on.
 Make sure the wall outlet is working.
 Make sure the TV is plugged in.
 Make sure the remote has batteries.
Remote control malfunctions
 Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission
window).
 Check that the “+” and “-” ends of the batteries are
inserted correctly.
 Check that the batteries are drained.
English - AA68-04004A-01Eng_0724.indd 6
2008-07-24 오전 11:39:07
OSD Map
Input
✽ : It is variable depending on the model.
– Source List ✽
– TV / AV1 / AV2 / Component
Picture
– Mode
–
– Digital NR –
– DNIe Jr ✽
–
Mode
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
Color Tone
Reset
Off / On
Off / On
Sound ✽
–
–
–
–
Mode
Adjust Auto Volume Turbo Sound
–
–
-
–
Standard / Music / Movie / Speech / Custom
Bass / Treble / Balance
Off/On
Off / On
Channel
–
–
–
–
Air/Cable
Auto Program
Add/Delete
Fine Tune
– Air / Cable
Setup
– Plug & Play
– Language ✽
– Time
– Caption ✽ – Child Lock
– Blue Screen
– Dynamic / Standard / Movie / Custom
– Cool2 / Cool1 / Normal / Warm1 / Warm2
Standard screen format televisions (4:3, the aspect ratio of the
screen width to height) are primarily designed to view standard
format full-motion video. The images displayed on them should
primarily be in the standard 4:3 ratio format and constantly
moving. Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total
television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary graphics
and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming,
should be limited to no more than 15% of the total television
viewing per week.
Additionally, viewing other stationary images and text such as
stock market reports, video game displays, station logos, web
sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary
images that exceed the above guidelines can cause
uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and images,
and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
– Added / Deleted
–
–
–
–
–
–
–
–
Important Warranty Information
Regarding Television Format Viewing
Clock
On Timer
Off Timer
Off/On
Child Lock
Channel
Lock
Off / On
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
Viewing screen size : 508mm
English - AA68-04004A-01Eng_0724.indd 7
2008-07-24 오전 11:39:07
This page is intentionally
left blank.
AA68-04004A-01Eng_0724.indd 8
2008-07-24 오전 11:39:08