ITW Dynatec M DM M210 adhesive supply unit Operations and Service Manual

The M DM M210 adhesive supply unit is a computer-controlled hot-melt supply unit designed on metric standards. It utilizes Allen Bradley SLC (small logic controller) 500 systems and interfaces with Allen Bradley's PanelView touchscreen control panel. It features a Teflon-coated hopper that accepts adhesive in pellets, slugs, and blocks, and is capable of accommodating air-actuated automatic applicators (heads), electric applicators, hand-held applicators, and/or special applicators.

PDF Download
Document
ITW Dynatec M DM M210 Adhesive Supply Unit Operations and Service Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Computer-controlled
  • Metric standards
  • Allen Bradley SLC 500 system
  • PanelView touchscreen control panel
  • Teflon-coated hopper
  • Accommodates various applicators
  • Microprocessor temperature control
  • Alarm system
  • Seven-day scheduler
  • High flow model available

Frequently asked questions

The M DM M210 Adhesive Supply Unit is designed to melt, store, and dispense hot-melt adhesive for various applications, such as bonding, sealing, and coating.

The M DM M210 can handle most popular forms of adhesive, including pellets, slugs, and blocks. It is recommended to consult with your adhesive supplier for compatibility.

The M DM M210 is capable of generating up to 1000 psi (68 bar) of adhesive pressure.

Yes, the M DM M210 has a seven-day scheduler that allows you to program automatic start up and shut down times for the unit throughout the workweek.

The M DM M210 employs a microprocessor-based proportional integral derivative (PID) temperature control system.
Preparing document for printing…
0%