Samsung HT-BD2-XAC, HT-BD2 User's manual

Samsung HT-BD2-XAC, HT-BD2 User's manual
quick start guide
1 disc playback
2 remote control functions
3 connecting the speakers
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
2 remote control functions
7.1CH Blu-ray
Home Theater System
HT-BD2
1
2
19
3
2
20
3
4
5
6
7
1 disc playback
1
18
8
24
9
10
28
11
29
15
30
31
32
33
34
16
35
12
13
14
17
Press to set the sleep off time.
20
21
22
11
12
13
14
15
16
17
23
Tuning Preset/CD Skip buttons
MENU button
CANCEL button
3. Connect the connecting plugs to the back of the Blu-ray Home Theater by matching the
colors of the speaker plugs to the speaker jacks.
STEP button
4. Use the Audio cable to connect the SUBWOOFER OUT jack of the Blu-ray Home Theater
to the AUDIO IN jack of the subwoofer.
Use this to enter the popup menu/title
menu.
24
25
The picture moves forward one frame
each time the button is pressed during
playback.
28
29
Enlarges the picture during disc playback.
Selects the disc Audio language.
Selects the disc subtitle language.
33
34
Press to select external audio input.
D.IN button
2 - English
Press to return to the previous menu.
DISC MENU button
Use this to enter the disc menu.
35
Surround-Back Speaker (L)
Surround-Back Speaker (R)
Surround Speaker (R)
EXIT button
Press to exit the setup screen.
Surround Speaker (L)
PL IIx MODE button
Adjusts the Dolby Pro Logic IIx audio
effect.
32
Front Speaker (L)
Front Speaker (R)
Press to mute the sound.
31
Press to listen to radio broadcasting.
Press to select external digital input.
MUTE button
Allows you to select six different Dolby
Pro Logic IIx audio modes.
SUBTITLE button
Center Speaker
Press to select the channel or to tune in
radio broadcasting.
30
DIMMER button
The front display brightness will be
adjusted.
Subwoofer Speaker
TUNING/CH button
27
Press to memorize radio frequencies.
AUDIO button
Audio cable
Press to stop.
Cursor/ENTER button
Used to select or move up/down, left/
right when setting the menu function.
TUNER MEMORY, MARKER button
ZOOM button
STOP button
RETURN button
INFO button
View or change disc playback information
on screen.
Red
Used to cancel a wrong entry.
26
Color buttons
Allow access to common functions of the Blu-ray
Home Theater such as the Music or Photo List.
Black
Fast backward or forward
through a song/scene.
Press to see the menu.
POPUPMENU, TITLE Menu button
2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal,
and then release the tab.
FM
VOLUME button
Press + to raise the volume and – to
lower it.
1. Press down the terminal tab on the back of the speaker.
SEARCH buttons
Tune in radio broadcasting, skip the
song/scene.
AUX button
HT-BD2_QG_1023.indd
1-3
HT-BD2_XAC_QG_0219.indd
1-3
Press to select TV in VIDEO mode.
Press to play or pause.
TUNER button
Code No. AH68-01838H(0.0)
TV/VIDEO button
PLAY/PAUSE button
Press to select the BD/DVD mode.
1 - English
Press to eject the disc.
MO/ST button
BD button
18
EJECT button
Selects three different slow motion
playback speeds.
You can listen to radio broadcasts in
MONO or STEREO.
8
10
Press to turn the Blu-ray Home Theater or
your Samsung TV On/Off.
19
SLOW button
6
27
POWER button
SLEEP button
21
22
26
You can operate your Samsung TV with the
remote control.
5
25
9
TV button
Number (0~9) buttons
7
2. To eject the disc, press the EJECT button.
• When you stop disc play, the player remembers where you
stopped, so when you press PLAY/PAUSE ( ) button again,
it will pick up where you left off.
• Press the STOP ( ) button twice during playback to disable the
Resume function.
• To pause the playback, press the PLAY/PAUSE ( ) button
during playback. To resume, press the PLAY/PAUSE( ) button once
again.
You can operate your BD receiver(Blu-ray
Home Theater) with the remote control.
4
23
1. Insert a disc into the disc insert hole.
• Insert a disc so that the label side faces upward.
• Playback starts automatically.
BD RECEIVER button
3 connecting the speakers
PL IIx EFFECT button
SFE (Sound Field Effect) MODE button
 Do not let children play with or near the speakers. They could get hurt if a speaker falls.
 When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
You can select a sound mode suited for the
type of music you’re listening to.
 Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
REPEAT A-B button
 Do not hang the subwoofer on the wall through the duct (hole).
substances into the duct (hole) of the subwoofer speaker.
Allows you to repeat playback of a certain
section.
NEO:6 MODE button
You can enjoy 2 channel or DTS
5.1 channel audio signals over
6.1 or 7.1 channels.
M
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
REPEAT button
Repeat playback of a chapter, title, group
or track.
3 - English
2007-10-23
2008-02-20 ��6:18:32
5:22:02
2008-02-20 �� 5:22:52
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
Choose one of the three methods for connecting to a TV.
Connecting the FM Antenna
AUX : Connecting an External Analog Component
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Analog signal components such as a VCR.
2. S
lowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid
surface.
1. Connect AUX IN (Audio) on the Blu-ray Home
Theater to the Audio Out of the external analog
component.
• Be sure to match connector colors.
METHOD3
(supplied)
METHOD2
METHOD1
2. Press the AUX button on the remote control to
select AUX input.
• You can also use the FUNCTION button on
the main unit.
The mode switches as follows :
BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM
Audio Cable (not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
FM Antenna(supplied)
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the Blu-ray Home Theater to the HDMI IN jack on your TV.
M
METHOD 2 : Component Video
You
can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video
Output (Pr, Pb and Y) Jacks on the back of the Blu-ray Home Theater to the Component Video Input Jacks on your TV.
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Blu-ray Home Theater to the VIDEO IN jack on your TV.
M
Depending on your TV, certain HDMI output resolutions may not work.
 If an HDMI cable is connected from the player to a TV, the Blu-ray Home Theater’s output is set to
HDMI automatically within 10 seconds.
 If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 40)
 When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the
HDMI output resolution will be automatically set to the highest provided by the TV.
 If you connect a Samsung TV to the Blu-ray Home Theater using an HDMI cable, the player can be easily
operated using the TV remote control.
(This is only available with Samsung TVs that support the Anynet+ feature.)
 If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stop
playing.
 After making the video connection, set the Video input source on your TV to match the Corresponding Video
output (HDMI, Component or Composite) on your Home theater.
See your TV owner’s manual for more information on how to select the TV’s Video Input source.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Remote Control
1. Connect the Digital Input
(OPTICAL 1 or OPTICAL 2) on the
Blu-ray Home Theater to the Digital Output of
the external digital component.
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the SKIP (
) button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the
TUNING/CH (
) button to automatically search for active broadcasting stations.
• Manual Tuning : Briefly press the TUNING/CH (
) button to increase or decrease the frequency incrementally.
2. Press the D.IN button on the remote control
to select D.IN 1 or D.IN 2 input.
• You can also use the FUNCTION button
on the main unit.
Optical Cable(not supplied)
The mode switches as follows :
BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM
M
This unit does not receive AM broadcasts.
Listening to Radio
OPTICAL : Connecting an External Digital Component
METHOD 3 : Composite Video
M
Main Unit
1. Press the FUNCTION button to select the FM band.
To see video from your Cable Box/Satellite receiver, you must connect it’s video output to a TV.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP ( ) button to select PRESET and then press the SKIP (
the preset station.
• Automatic Tuning 2 : Press the STOP ( ) button to select MANUAL and then press and hold the
) button to automatically search the band.
SKIP (
• Manual Tuning : Press the STOP ( ) button to select MANUAL and then briefly press the SKIP (
in to a lower or higher frequency.
) button to select
) button to tune
 You can select from a variety of resolution settings such as 1080p, 1080i, 720p, 480p and 480i, depending on
the disc type.
 The actual resolution may differ from the setting in the SETUP menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc.
 If the resolution is set to ‘i’ (ex: 480i or 1080i), the output is displayed in 30 frames per second and if set to ‘p’
(ex: 480p, 720p, 1080p), it will be displayed in 60 frames per second.
i : interlaced mode (30 frames)
p : progressive mode (60 frames)
4 - English
HT-BD2_XAC_QG_0219.indd 4-6
5 - English
6 - English
2008-02-20 �� 5:22:09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement