Samsung | HT-DB390 | User's Manual | Samsung HT-DB390 User manual

DIGITAL HOME
THEATER SYSTEM
HT-DB390
SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
TEL: 1-905-542-3535
www.samsung.ca
Instruction Manual
SERVICE DIVISION
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
1-800-SAMSUNG (1-800-726-7864)
ASC
LSM
V-H/P
COMPACT
AH68-01445S
VIDEO
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
PREPARATION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Precautions
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
Phones
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
Contents
Features
The HT-DB390 combines the convenience of multi-disc playback capability, including DVD, VCD,
CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a sophisticated AM/FM tuner, all in a single player.
Built-in 5.1-Channel Amplifier
The HT-DB390 comes with a built-in 5.1-channel amplifier, allowing you to enjoy dynamic sound.
Super Digital Sound Master
Equipped with a new digital audio technology (Auto Sound Calibration, Magic Sound
Field, and Magic Headphone) developed in cooperation with DiMagic Co., Ltd. in
Japan, you'll enjoy a more lively and sensitive sound.
Wireless Rear Speakers and Amp
The HT-DB390 has a rear surround wireless amp that removes the need for long speaker cables
between the main unit and rear speakers.
Sound Logo
When power is turned on, a sound logo is output from the speakers to notify the user that the unit
is optimized for disc playback.
TV Screen Saver Function
The HT-DB390 automatically brightens and darkens the brightness of the TV screen after 3
minutes in the stop mode.
The HT-DB390 automatically switches itself into the power saving mode after 20 minutes in the
screen saver mode.
Power Saving Function
The HT-DB390 automatically shuts itself off after 20 minutes in the stop mode.
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
Customized TV Screen Display
The HT-DB390 allows you to select your favorite image during JPEG, DVD playback and set it as
your background wallpaper.
3
PREPARATION
Multi-Disc Playback & AM/FM Tuner
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers....................................................................................................................................................11
Connecting the Video Out to TV .........................................................................................................................................15
P.SCAN(Progressive Scan) Function .................................................................................................................................16
Connecting External Components ......................................................................................................................................17
Connecting the Antennas....................................................................................................................................................19
Before Using Your DVD Player...........................................................................................................................................21
OPERATION
Disc Playback .....................................................................................................................................................................23
MP3-CD Playback...............................................................................................................................................................24
JPEG Disc Playback ...........................................................................................................................................................25
Displaying Disc Information ................................................................................................................................................26
Fast/Slow Playback.............................................................................................................................................................27
Skipping Scenes/Songs ......................................................................................................................................................28
Repeat Playback.................................................................................................................................................................29
A-B Repeat Playback..........................................................................................................................................................30
Angle Function ....................................................................................................................................................................31
Zoom Function ....................................................................................................................................................................32
Selecting Audio/Subtitle Language .....................................................................................................................................33
Moving Directly to a Scene/Song........................................................................................................................................34
Using Disc Menu.................................................................................................................................................................35
Using the Title Menu ...........................................................................................................................................................36
SETUP
Setting the Language..........................................................................................................................................................37
Setting TV Screen type .......................................................................................................................................................39
Setting Parental Controls (Rating Level).............................................................................................................................41
Setting the Password ..........................................................................................................................................................43
Setting the Wallpaper..........................................................................................................................................................45
Setting the Speaker Mode ..................................................................................................................................................47
Setting the Test Tone..........................................................................................................................................................48
Setting the Delay Time........................................................................................................................................................49
Setting the Audio Quality ....................................................................................................................................................51
Setting the DRC (Dynamic Range Compression)...............................................................................................................53
Auto Sound Calibration Setup.............................................................................................................................................55
Live Surround Mode............................................................................................................................................................57
Dolby Pro Logic II Mode......................................................................................................................................................59
Dolby Pro Logic II Effect .....................................................................................................................................................60
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................61
Presetting Stations..............................................................................................................................................................62
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................63
Operating a TV with the Remote Control ............................................................................................................................65
Before Calling for Service ...................................................................................................................................................67
Cautions on Handling and Storing Discs ............................................................................................................................69
Specifications......................................................................................................................................................................70
Notes on Terminology.........................................................................................................................................................71
Warranty .............................................................................................................................................................................72
4
Notes on Discs
VIDEO
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
PREPARATION
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
Disc Recording Format
CD-R Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
may not be able to fully play the disc.
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
5"
Audio + Video
DVD
3 1/2"
VIDEO
COMPACT
Audio + Video
VIDEO-CD
DIGITAL VIDEO
COMPACT
Audio
AUDIO-CD
DIGITAL AUDIO
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5"
74 min.
3 1/2"
20 min.
5"
74 min.
3 1/2"
20 min.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the
disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
Do not use the following types of disc!
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
5
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
Description
Play/Pause (
Standby indicator
Power (
Stop (
) button
) button
Open/Close button
) button
Function button
Auto Sound Calibration button
Magic Sound Field button
Magic Headphone button
ASC
Auto Sound Calibration
Input Jack
LSM
S-Video Output Connector
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
External Digital in Optical Input Connector
Use this to connect external equipment capable of digital output.
If the TV is equipped with an S-Video
input connector (S-VIDEO IN), connect it
to the player's S-Video output jack.
COMPONENT VIDEO OUTPUT jacks
Connect a TV with component video inputs to
these jacks.
V-H/P
Volume control
Headphone Jack
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
Disc Tray
PREPARATION
—Rear Panel—
—Front Panel—
Speaker Output
Terminals
External Video Component
Input Connectors
External Audio Component
Input Connector
Transmission Antenna Output
FM Antenna
Connector
AM Antenna
Connector
Connect the wireless transmission antenna.
Accessories
DOLBY DIGITAL indicator
LINEAR PCM indicator
CHAPTER indicator
PROGRAM indicator
DSP indicator
TITLE indicator
PBC indicator
STEREO indicator
TUNER indicator
Remote Control
DTS Disc indicator
PRO LOGIC II indicator
SPEAKER indicator
AM Antenna
System Status Display
Audio Cable
Video Cable
FM Antenna
Wireless Transmission Antenna
Auto Sound Calibration Microphone
Wireless rear receiver
RADIO FREQUENCY
indicator
User's Manual
7
* The wireless receiving antenna is built into the wireless rear amplifier.
8
Description
TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
Insert Remote Batteries
TV DVD RECEIVER
OPEN/CLOSE
TV/VIDEO
DIMMER
MODE
DVD
TUNER
BAND
AUX
ASC
SLOW
MO/ST
SUB TITLE
SUPER5.1
MUSIC
Auto Sound Calibration button
MOVIE
Play/Pause button
PL II
EFFECT
PL II MODE button
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Stop button
Tuning Preset/CD Skip button
PL II EFFECT button
VOLUME button
TUNING/CH button
INFO
U
MEN
INFO button
E
UT
M
RE
TU
RN
MENU button
ENTER
SOUND EDIT
TUNER
MEMORY
P. SCAN
SLEEP
LOGO
EZ VIEW
MUTE button
Direction/Enter button
TEST TONE
Number(0~9) buttons
EZ VIEW button
AUX button
TUNER BAND button
SUB TITLE button
SLOW, MO/ST button
MOVIE button
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
VOLUME
TUNING/CH
SLEEP button
LOGO COPY button
1
V-H/P
PL II
MODE
RETURN button
TV indicator
DVD RECEIVER indicator
MODE button
DVD button
LSM
SUPER 5.1 button
Live Surround Mode button/
Virtual Headphone button
PREPARATION
—Remote Control—
CANCEL
ZOOM
REPEAT
WIRELESS
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
TEST TONE button
SOUND EDIT button
TUNER MEMORY, P.SCAN button
ZOOM button
CANCEL button
WIRELESS button
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
REPEAT button
9
10
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Front Speaker (R)
Front Speaker (L)
C
CONNECTIONS
Center Speaker
SW
L
R
Red
White
LS
Green
Wireless Transmission Antenna
RS
Purple
Wireless Rear Amplifier (SWA-1000)
(With built-in wireless receiving antenna)
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3 feet) above your ear, facing
slightly downward.
*
Unlike the front and center speakers, the rear speakers are used
to handle mainly sound effects and sound will not come from
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Subwoofer
Wireless Rear
Speaker (L)
Wireless Rear
Speaker (R)
Back of the Speakers
1 Press down the terminal 2 Insert the wire into the
tab on the back of the
speaker.
terminal and release the
terminal tab.
• Insert the black wire into the black
•
Back of the Main Unit
3 Connect the connecting plugs to
the back of the DVD player.
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
(–) terminal and the gray wire into
the gray (+) terminal.
Make sure the polarities (+ and –)
are correct.
Black
Gray
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
11
12
Connecting Wireless Rear Speakers
Caution
1
Connect your pair of
wireless rear speakers,
(L) and (R), to the
wireless rear amplifier.
2
Insert the power plug into an outlet,
and then press the POWER button
on the front panel.
• Do not connect the wireless rear speakers
• The Power Standby indicator will light up.
• To turn off the wireless rear amplifier,
•
•
Wireless Rear Speaker (L)
Wireless Rear Speaker (R)
Back of Wireless Rear Amplifier
Reset the system if a communication failure occurs, or if the synchronizing signal indicator does not light up and the
"REAR CHK" message blinks on the main unit's display.
Reset the system while the main unit and the wireless rear amplifier (SWA-1000) are in Power Standby mode.
1
With the main unit turned off, press and
hold the remote control's WIRELESS
button for 4 seconds.
• Press the button until the volume control indicator
lights up blue. (The indicator will turn off in 1 second.)
2
3
With the wireless rear amplifier turned
on, use a ball point pen or a pair of
tweezers to press the RESET button
on the back of the unit 2 to 3 times.
RESET Button
Back of Wireless Rear Amplifier
Turn on the main unit.
• The wireless rear amplifier's synchronizing signal
•
indicator will light up.
If Power Standby mode continues, repeat Steps 1
to 3 above.
Caution
• Sound will be heard from the wireless rear speakers in
DVD 5.1-CH or Dolby Pro Logic II mode only.
• In 2-CH mode, no sound will be heard from the wireless
rear speakers.
When using the wireless transmission antenna
Stand the wireless transmission antenna to face upward for best communication status.
CONNECTIONS
press the POWER button in Standby mode.
to the speaker outputs on the back of the
main unit. Malfunction may result.
The wireless receiving antenna is built into
the wireless rear amplifier.
Keep the unit away from water and
moisture.
For optimal listening performance, make
sure that the area around the proposed
wireless rear amplifier location is clear of
any obstructions.
Resetting Wireless Communication
Turning On the Mood Light
You can turn the mood light on the wireless rear amplifier on or off, as well as change the light to one of 7 different
colors according to your preference.
1
Press the POWER button on
the wireless amplifier.
2
• The Power Standby indicator on the
front panel will light up and the
mood light will turn on.
Press the COLOR MODE button.
• Each time the button is pressed, the color changes as
follows: Blue ➞ Light Green ➞ Red ➞ Sky Blue ➞
Yellow ➞ Pink ➞ White.
Caution
• Do not apply a strong shock to the wireless transmission antenna. Breakage may result.
• Do not touch the wireless transmission antenna during operation. Noise or interference to communications may result.
Note
• Place the wireless rear amplifier at the rear of the listening position. If the wireless rear amplifier is too close to the main unit, some sound
•
•
interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency
(2.4GHz) near the system, some sound interruption may be heard due to interference.
The transmission distance of radio wave is about 33 feet but may vary depending on your operating environment. If a steel-concrete wall or
metallic wall is between the main unit and the wireless rear amplifier, the system may not operate at all because the radio wave cannot
penetrate metal.
13
Turning Off the Mood Light
• In Power Standby mode, press the ON/OFF button on the Wireless amp.
The mood light will light up or turn off with the last color selected.
Turning off the Wireless Amp and Mood Light
• Press the POWER button on the wireless amp.
The wireless rear amplifier and the mood light will turn off.
When the wireless amp is powered on again, the mood light will be blue.
14
Connecting the Video Out to TV
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
down for a minimum of 5 seconds.
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
TV
Composite
Video
*
S-Video
Component
Video
Depending on your TV, Component Video input jacks may be marked as DVD Video input.
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
15
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 18 to select Progressive Scan.
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive
Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)
• Depending on the brand and model of your TV, this function may not work.
TV Broadcast System
• This device is designed to work with the NTSC video format.
• For normal playback, the video format a DVD disc is recorded in
must coincide with your TV's video format.
16
CONNECTIONS
While the player is in the Stop mode, hold the P.SCAN button down for longer
than 5 seconds.
• The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held
Connecting External Components
Connecting an External Analog Component
Example: Digital signal components such as a Settop Box or CD Recorder.
Example: Analog signal components such as a VCR or TV.
CONNECTIONS
Connecting an External Digital Component
Optical Cable
(not included)
Audio Cable
If the external analog
component has only one
Audio Out, connect
either left or right.
DIGITAL OUT VIDEO OUT
Video Cable
VIDEO IN
R
L
AUDIO OUT
1
2
3
Connect Video Out on the DVD player to Video In on the TV.
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
1
2
3
VIDEO OUT
Connect Video Out on the DVD player to Video
In on the TV.
Connect Video In on the DVD player to Video
Out on the external analog component.
Connect Audio In on the DVD player to Audio
Out on the external analog component.
• Be sure to match connector colors.
4
VIDEO IN
Note
• If you have connected an external digital
component and Video In (1, 2) at the
same time, there will be video from AUX 1
even when you select DIGITAL IN.
• If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
Press AUX on the remote control to select AUX 1
or AUX 2.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising