Samsung | HT-DS1000 | User's Manual | Samsung HT-DS1000 User's Manual

1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 3
SLIM DIGITAL HOME
THEATER SYSTEM
HT-DS1000
Instruction Manual
COMPACT
DIGITAL AUDIO
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 4
Safety Warnings
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 5
Precautions
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 6
Safety Instructions
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the appliance is operated.
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near waterfor example, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been
followed.
POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
3
CLEANING
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from
battery power, or other sources, refer
to the operating instructions.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 7
POLARIZATION
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
OUTDOOR ANTENNA GROUNDING
•If an outside antenna is connected to the
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
In
• the U.S.A section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
ATTACHMENTS
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
SERVICING
•Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer
all servicing to qualified service personnel.
•
REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SAFETY CHECK
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
c. If the video product has been exposed to rain
or water
d. If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
HEAT
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.
4
PREPARATION
POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 8
Features
Multi-Disc Playback with FM Tuner
The HT-DS1000 combines the convenience of multi-disc playback capability, including
DVD-VIDEO, DVD-AUDIO, CD, MP3-CD, WMA-CD, CD-R/RW, and DVD-R/RW, with
a sophisticated FM tuner, all in a single player.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound
quality in terms of dynamic range, low-level resolution and high-frequency detail.
Soft Touch Function Selection
The buttons on the front panel of the main unit are touch sensitive and easy to use.
Super Digital Sound Master
Equipped with a new digital audio technology (Auto Sound Calibration, Magic
Sound Field, and Magic Headphone) developed in cooperation with DiMagic
Co., Ltd. in Japan, you'll enjoy a more lively and sensitive sound.
Logo Sound
When you turn on the power, a ‘sound logo’ will be heard.
TV Screen Saver Function
The HT-DS1000 automatically brightens and darkens the brightness of the TV screen
after 3 minutes in the stop mode.
The HT-DS1000 automatically switches itself into the power saving mode after 20
minutes in the screen saver mode.
Samsung AV Device Operation using Anynet
You can conveniently operate Samsung DVD and AV devices with your Samsung
TV remote with Anynet.
AV SYNC Function
Video may lag behind the audio if the unit is connected to a digital TV.
To compensate for this, you can adjust the audio delay time to sync up with the video.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer
picture.
5
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 9
Contents
PREPARATION
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Safety Instructions ..............................................................................................................................................................3
Features..............................................................................................................................................................................5
Notes on Discs....................................................................................................................................................................7
Description ..........................................................................................................................................................................9
Installing DVD player .........................................................................................................................................................15
CONNECTIONS
Connecting the Speakers....................................................................................................................................................16
Connecting the Speakers....................................................................................................................................................17
Connecting the Video Out to TV .........................................................................................................................................19
How to Connect to Anynet ..................................................................................................................................................22
Connecting External Components ......................................................................................................................................23
Connecting the FM Antenna ...............................................................................................................................................25
Before Using Your DVD Player...........................................................................................................................................26
OPERATION
Disc Playback .....................................................................................................................................................................27
MP3-CD Playback...............................................................................................................................................................29
JPEG Disc Playback ...........................................................................................................................................................30
Displaying Disc Information ................................................................................................................................................31
Checking the Remaining Time............................................................................................................................................32
Fast/Slow Playback.............................................................................................................................................................33
Skipping Scenes/Songs ......................................................................................................................................................34
Repeat Playback.................................................................................................................................................................35
A-B Repeat Playback..........................................................................................................................................................37
Angle Function ....................................................................................................................................................................38
Zoom Function ....................................................................................................................................................................39
Bonus Group / Navigating Pages........................................................................................................................................40
Selecting Audio/Subtitle Language .....................................................................................................................................41
Moving Directly to a Scene/Song........................................................................................................................................42
Using Disc Menu.................................................................................................................................................................43
Using the Title Menu ...........................................................................................................................................................44
SETUP
Setting the Language..........................................................................................................................................................45
Setting TV Screen type .......................................................................................................................................................47
Setting Parental Controls (Rating Level).............................................................................................................................49
Setting the Password ..........................................................................................................................................................51
Setting the Wallpaper..........................................................................................................................................................53
DVD Playback Mode...........................................................................................................................................................55
Setting the Speaker Mode ..................................................................................................................................................57
Setting the Test Tone..........................................................................................................................................................58
Setting the Delay Time........................................................................................................................................................59
Setting the Audio Quality ....................................................................................................................................................61
Setting the DRC (Dynamic Range Compression)...............................................................................................................63
AV SYNC Setup..................................................................................................................................................................64
Dolby Pro Logic II Mode......................................................................................................................................................65
Dolby Pro Logic II Effect .....................................................................................................................................................66
Auto Sound Calibration Setup.............................................................................................................................................67
Live Surround Mode............................................................................................................................................................69
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................71
Presetting Stations..............................................................................................................................................................72
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................73
Operating a TV with the Remote Control ............................................................................................................................75
Before Calling for Service ...................................................................................................................................................77
Cautions on Handling and Storing Discs ............................................................................................................................79
Specifications......................................................................................................................................................................80
Notes on Terminology.........................................................................................................................................................81
Warranty .............................................................................................................................................................................82
6
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 10
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
5"
DVD-AUDIO
DVD-VIDEO
Audio + Video
3 1/2"
5"
74 min.
3 1/2"
20 min.
COMPACT
AUDIO-CD
Audio
DIGITAL AUDIO
DIGITAL
SOUND
Dolby Digital
disc
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
DTS disc
Digital Audio
disc
STEREO
Stereo disc
NTSC
NTSC video format
NTSC is used in all of North
America, the Philippines,
South Korea and Japan.
MP3 disc
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
•
7
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 11
PREPARATION
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD
player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copyprotected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Disc Recording Format
CD-R/RW Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
may not be able to fully play the disc.
CD-R/RW MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
CD-R/RW JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
8
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 12
Description
—Front Panel—
Play/Pause (
) button
Power (
) button
Volume control
Stop ( ) button
Open/Close (
) button
Function button
Tuning Up & Skip (
) button
Tuning Down & Skip (
) button
Display
DOLBY DIGITAL indicator
DSP indicator
PRO LOGIC II indicator
DVD AUDIO indicator
DTS Disc indicator
9
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 13
PREPARATION
—Rear Panel—
Resolution Switch
ANYNET INPUT/OUTPUT
Connectors
External Digital in Optical 1,2
Input Connectors
Accessories
Remote Control
(AH59-01404C)
Auto Sound Calibration
Microphone
(AH59-01183D)
Audio Cable
(AH39-40001U)
FM Antenna
(AH42-00017A)
Video Cable
(AH39-40001V)
Vertical Stand (AH97-01311A)
Screw Large : 3EA (6003-001263)
Screw Small : 4EA (AH60-00025A)
DIN Audio Connection
Cable
(AH39-00582A)
Anynet Cable
(AH39-40001Z)
Horizontal Stand (AH97-01312A)
Screw Large : 2EA (AH64-01106L)
User's Manual
(AH68-01544R)
10
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 14
Description
Top
Headphone Jack
Auto Sound Calibration button
FM Antenna Connector
Bottom
HDMI Video/Audio Output
Connector
COMPONENT VIDEO
OUTPUT Connector
External Audio Component
Input Connector
DIN Audio Output Jack
Video Output Connector
11
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 15
PREPARATION
Subwoofer
Subwoofer Level control
Crossover frequency control
< Right >
DIN Audio Input terminal
Speaker Output Terminals
< Rear >
Subwoofer Power button
12
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 16
Description
—Remote Control—
TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
TV DVD RECEIVER
OPEN/CLOSE
TV/VIDEO TV/DVD RECEIVER
DIMMER
DVD
TUNER
AUX
ASC
SLOW
MO/ST
SUBTITLE
SUPER5.1
MUSIC
Auto Sound Calibration button
LSM
SUPER 5.1 button
Live Surround Mode button/
Virtual Headphone button
MOVIE
TUNER button
SUBTITLE button
SLOW, MO/ST button
MOVIE button
Play/Pause button
PL II
EFFECT
PL II MODE button
INFO
U
MEN
Tuning Preset/CD Skip button
INFO button
E
UT
M
RE
TU
RN
MENU button
ENTER
MUTE button
Direction/Enter button
TEST TONE
Number(0~9) buttons
TEST TONE button
SOUND EDIT
TUNER
MEMORY
DCDi
SLEEP
LOGO
EZ VIEW
CANCEL
ZOOM
REPEAT
REMAIN
SOUND EDIT button
TUNER MEMORY, DCDi button
ZOOM button
CANCEL button
REMAIN button
REPEAT button
13
Stop button
PL II EFFECT button
TUNING/CH button
VOLUME button
EZ VIEW button
AUX button
TUNING/CH
PL II
MODE
SLEEP button
LOGO COPY button
DVD button
V-H/P
VOLUME
RETURN button
TV indicator
DVD RECEIVER indicator
TV/DVD RECEIVER button
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 17
PREPARATION
Insert Remote Batteries
1
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking batteries:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
14
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 18
Installing DVD player
You can select and install either the Vertical or Horizontal Stand, depending on your preference.
Vertical Stand (supplied)
Main unit
1
Fix the round support and Vertical
Stand with screws 3EA.
2
Open the cover on the rear of Vertical
Stand and connect the Audio/Video
cable into the Vertical Stand.
3
Locate the two indentations on the bottom
of the Main unit. Slide the Main unit onto
the two matching dowels on Vertical Stand.
4
Fix the Vertical Stand and the main
unit with screws 4EA.
REAR OF MAIN UNIT
4
3
(See pages 19~24 for how to connect the cable.)
Vertical Stand
2
Round support
1
REAR OF
VERTICAL STAND
Horizontal Stand (supplied)
Main unit
1
Locate the two indentations on the side
of the main unit and slide onto the two
matching dowels on Horizontal Stand.
2
Fix the Horizontal Stand and the
main unit with screws 2EA.
Horizontal Stand
15
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 19
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
SW
R
LS
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
CONNECTIONS
L
RS
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3 feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* Unlike
to handle mainly sound effects and sound will not come from
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
16
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 20
Connecting the Speakers
Connect the front, rear and center speakers to the speaker output jack on the side of subwoofer.
Rear of Subwoofer
Bottom of Main unit
Center Speaker
Green
Rear Speaker (R)
Rear Speaker (L)
Blue
Gray
Red
White
Front Speaker (R)
Front Speaker (L)
Connecting the Speakers
1
Press down the terminal
tab on the back of the
speaker.
2
Insert the black wire into the
black terminal (–) and the gray
wire into the gray (+) terminal,
and then release the tab.
Black
Gray
Caution
• Do not let children play with or near the speakers.
They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers,
make sure that the polarity (+/–) is correct.
• Never touch the speaker terminal while the power is on.
Doing so may result in a risk of electric shock.
17
3
Connect the correct color speaker cable
to the same color speaker output terminal
on the rear of the subwoofer, according to
the polarity markings (+/–).
Example: Connect the green center speaker cable
to the green center speaker output
terminal on the rear of the subwoofer
according to the polarity markings (+/–).
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. If this occurs, place the speaker
away from your TV set.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 21
Connecting Main Unit to Subwoofer
1
CONNECTIONS
2
Use the supplied DIN audio connection cable to
connect DIN Audio Out on the main unit to DIN Audio
Input on the subwoofer.
Press the subwoofer power button on the subwoofer
to turn on the power.
Waring
The DIN Audio Connection Cable on this product contains lead, a chemical known to the State of
California to cause [cancer,and]birth defects or other reproductive harm. Wash hands after
handling.
Subwoofer Function
Subwoofer: The subwoofer is active, with a built-in a 150W
amplifier, and outputs rich bass through 8 inch
speaker units. You can listen to the optimal LFE
(bass) by using the subwoofer-only volume control
and the variable crossover control.
• The control is calibrated from –6dB (minimum) to
+6dB (maximum).
Crossover: The Crossover sets the cutoff frequency for the
subwoofer. Set the Crossover control for the best
bass response in your room.
• You can adjust the bass or treble output from the
front, rear, center speakers and the subwoofer.
• To the left increases the bass and to the right,
treble.
18
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 22
Connecting the Video Out to TV
Method1
When you connect to Video Out (supplied)
1
Connect the Video Out to the Video In
on the TV.
2
Set the Video Input source on your TV
to the corresponding Video output on
your Home Theater.
Video Out
• Video (Normal): normal type of video with combination of color signals and black and white signals.
• Component Video: video output with separation of red (PR), blue (PB), and green (Y) signal for the most
distinct and clear picture.
Method 2
When you connect to Component Out
Connect if the TV component input supports the resolution of over 480p.
1
Connect the component output (PR, PB,
Y) to the component input on the TV
(PR, PB, Y).
• Be sure to make the correct connections between the
when you connect the component output jacks to the
TV. If these are connected wrong, the screen may
show red or blue, or there may be no screen at all.
2
Set the Video Input source on your TV
to the corresponding Component output
on your Home Theater.
Note
19
• If the TV only supports a resolution of 480i, the screen
may be divided into 2 screens, or display nothing.
The Component input may be marked ‘DVD input’
depending on the TV.
1p~44p(DS1000)-sea
Method 3
9/15/04 2:43 PM
Page 23
When you connect to HDMI Video/Audio
Connect if the TV has an HDMI Video/Audio In jack.
Connect the HDMI Video/Audio Out to
the HDMI Video/Audio Input on the TV.
2
Set the Video Input source on your TV
to the corresponding HDMI output on
your Home Theater.
CONNECTIONS
1
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video and audio signals digitally without the process of
converting to analog. You can get sharper digital pictures by connecting the video to the
TV using an HDMI connection cable.
Note
• If you connect the HDMI and Component outputs (PR, PB, Y) at the same time, the Component output
resolution changes automatically to the designated HDMI resolution.
Example: If the TV connected to HDMI can only support up to 480p, the HDMI and Component outputs are
all converted to 480p, even if you select the resolution switch to 1080i.
• Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can
enhance a 480i DVD resolution output to 480p/720p/1080i.
• You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has
an HDMI Video/Audio Input jack, output is automatically converted to the resolution of 1080i.)
• Audio will not be output if decoder is not embedded in TV during 5.1 channel disk playback.
• Component output will give video in ‘480P’ mode only during DVD disc playback applied with Macrovision.
• Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using
HDMI only, it can output 480P/720P/1080i, but is limited to 480p only if you are using component.
• See your TV owner's manual for more information on how to select the TV's Video Input source.
20
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 24
Connecting the Video Out to TV
Selecting Resolution
You can adjust the resolution switch to set the HDMI and component (PR, PB, Y) output resolution to
480p/720p/1080i.
Example: If the TV supports resolution up to 480p
1
Set the resolution switch to 480p.
• A 480p video signal is output through the HDMI and
component outputs (PR, PB, Y).
Caution
• If you connect the HDMI and Component outputs (PR, PB, Y) at the same
time, Component output resolution changes automatically to the
designated HDMI resolution.
Note
• If copy protection is in place, output resolution is automatically converted to 480p when you play the DVD,
even if you set the resolution to 720p or 1080i.
DCDi (Directional Correlational Deinterlacing) Function
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
Press and hold DCDi button on the remote
control for over 3 seconds.
• Each time the button is pressed, the selection alternates between
DCDi ON and DCDi OFF.
21
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 25
How to Connect to Anynet
Using the Anynet function, the DVD Home Theater System can be conveniently controlled from
your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater
System to the input terminal of any Samsung Anynet-enabled device, both can be controlled
from your TV. For detailed operation instructions and connection diagram, refer to the user's
manual of your Anynet-enabled TV.
What is Anynet?
Other AV devices
VIDEO IN
Samsung DVD player
ANYNET
TERMINAL
Samsung VCR
Samsung Set-Top Box
Use this to connect Anynet-enabled
AV devices when necessary.
VIDEO OUT
1
Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
2
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
3
Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.
* This function is available only with Anynet-enabled TVs.
Caution
• If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
22
CONNECTIONS
• The Anynet function allows you to use your TV's remote control and menu to control all AV devices.
• However, this function is available only with Samsung Anynet-enabled models.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 26
Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Settop Box or CD Recorder.
Optical Cable
(not included)
1
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the
external digital component.
2
Press AUX on the remote control to select ‘D.IN 1 or D.IN 2’.
• Each time the button is pressed, the selection changes as follows: D.IN 1 ➝D.IN 2 ➝AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ FM.
23
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 27
Connecting an External Analog Component
CONNECTIONS
Example: Analog signal components such as a VCR or TV.
Audio Cable
If the external analog
component has only one
Audio Out, connect either left
or right.
L
R
1
Connect Audio In on the main unit to Audio Out on the external analog component.
2
Press AUX on the remote control to select AUX.
• Be sure to match connector colors.
• Each time the button is pressed, the selection changes as follows: D.IN 1 ➝D.IN 2 ➝AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ FM.
Note
• To listen TV sound in 5.1 channel sound through the main unit, connect the Audio In on the
main unit to the Audio Output on the TV.
• You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to the HT-DS1000.
24
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 28
Connecting the FM Antenna
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary
measure.
2. Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
25
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 29
Before Using Your DVD Player
Your DVD player is capable of playing DVD, CD, MP3 and JPEG discs.Depending on the disc you
are using, these instructions may vary slightly. Read the instructions carefully before using.
2
Press the TV/DVD
RECEIVER button so that
the TV indicator on the
remote control flashes.
TV
4
Press TV/VIDEO
button to select
VIDEO mode.
5
3
Press the POWER
button to turn on
the TV.
6
Press TV/DVD
RECEIVER button
to select DVD/CD
mode.
DVD RECEIVER
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
TV
CONNECTIONS
1
Plug the power
cord into the AC
power supply.
DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
Press MODE button.
• Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs. See page 65 for more information on the operation of the remote control.
Note
• If you move the product during playback, the disc may be damaged.
• If you push the disc window up or down by hand, it may cause a breakdown.
• Do not let children insert their fingers into the unit.
26
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 30
Disc Playback
1
Press OPEN/CLOSE button to open the
disc tray.
2
Insert the disc so that the printed side
faces up.
3
Press OPEN/CLOSE button to close the disc
window.
• The disc plays automatically when the disc window is closed.
• The disc menu may appear differently depending on the disc.
DVD
CD
• Playback starts automatically.
To stop playback,
press STOP during playback.
• If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory.
If PLAY/PAUSE (
) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
27
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE (
button again.
)
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 31
Disc terminology
Groups and tracks (DVD-AUDIO)
CONNECTIONS
• DVD-audio is divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
GROUP 2
TRACK 3
TRACK 1
TRACK 2
Titles and chapters (DVD-VIDEO)
• DVD-video is divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TITLE 1
CHAPTER 1
CHAPTER 2
TITLE 2
CHAPTER 3
CHAPTER 1
CHAPTER 2
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
.
Note
• In this manual, the instructions marked with "DVD (
DVD )" are applicable to
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
28
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 32
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
1
Press the
OPEN/CLOSE button
to open the disc
windows, and then
load the MP3 disc.
2
In Stop mode, use
to select
the album, and
then press the
ENTER button.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear
and playback will start.
• Depending on the MP3 disc, the
appearance of the menu may be
different.
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
29
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 33
JPEG Disc Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this unit.
Press the OPEN/CLOSE button to open the disc windows, and
then load the JPEG disc.
• Playback will start automatically and each image will show for 5 seconds before moving to
the next image.
OPERATION
To rotate the image
During playback, press
.
Rotate vertically
Rotate 90° counterclockwise
Rotate horizontally
Rotate 90° clockwise
30
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 34
Displaying Disc Information
You can view disc playback information on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as follows:
CD
DVD
MP3
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
Display disappears
•
Display disappears
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Display disappears
• What is a Group?
A group of tracks contained in a DVD-AUDIO disc.
Note
• What is a Title?
• Depending on the disc, the disc
•
A movie contained in a DVD-VIDEO disc.
information display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3-CD.
Screen Display
DVD display
CHAPTER display
AUDIO LANGUAGE display
STEREO (L/R) display
CD display
TRACK (FILE) display
SUBTITLE display
DOLBY DIGITAL display
MP3 CD display
ELAPSED TIME display
ANGLE display
TITLE display
GROUP display
DVD DVD-AUDIO display
AUDIO
31
REPEAT PLAYBACK display
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 35
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed
DVDVIDEO
DVDAUDIO
GROUP ELAPSED
TITLE REMAIN
GROUP REMAIN
CHAPTER ELAPSED
TRACK ELAPSED
CHAPTER REMAIN
TRACK REMAIN
CD
MP3
TRACK ELAPSED
TRACK REMAIN
TRACK REMAIN
TRACK ELAPSED
TOTAL ELAPSED
TOTAL REMAIN
32
OPERATION
TITLE ELAPSED
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 36
Fast/Slow Playback
Fast Playback
Press and hold
DVD
CD
.
• Each time the button is held down during playback,
the playback speed changes as follows:
Slow Playback
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
33
MP3
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 37
Skipping Scenes/Songs
DVD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
track, or directory (file) will be played.
DVD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
DVD RECEIVER
OPERATION
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
34
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 38
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback
mode changes as follows:
DVDVIDEO
MP3
35
JPEG
DVDAUDIO
CD
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 39
To Select a Repeat Playback Mode in the Disc Information Screen
Press INFO button twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK(
) display.
3
Press Cursor button to select the
desired Repeat Playback mode.
4
DVD
OPERATION
1
CD
Press ENTER button.
* For MP3 and JPEG discs, you cannot select
Repeat Play from the information display screen.
Repeat Playback Options
• CHAPTER : Repeatedly plays the selected chapter.
• TITLE : Repeatedly plays the selected title.
• GROUP : Repeatedly plays the selected group.
• RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
• TRACK : Repeatedly plays the selected track.
• DIR : Repeatedly plays all tracks in the selected folder.
• DISC : Repeatedly plays the entire disc.
• OFF : Cancels Repeat Playback.
36
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 40
A-B Repeat Playback
DVD
1
CD
Press INFO button
twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK
( ) display.
4
Press ENTER
button at the end
of the segment.
• For a CD, press INFO button once.
3
Press Cursor ,
buttons to select ‘A-’ and then
press ENTER button at the
beginning of the segment.
• When ENTER button is pressed,
the selected position will be stored in
memory.
• The specified segment will be played
repeatedly.
A-
A-B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
37
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 41
Angle Function
This function allows you to view the same scene in different angles.
DVD
1
Press INFO button.
2
Press Cursor
button to move to
ANGLE ( )
display.
1/3
1/3
OPERATION
3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
Note
• The Angle function works only with discs on which multiple angles have been recorded.
38
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 42
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to
enlarge.
DVD
3
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
Aspect Ratio
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
39
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 43
Bonus Group / Navigating Pages
Bonus Group
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the key number.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
OPERATION
BONUS GROUP
KEY NUMBER :
Note
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
During playback, press the
remote control.
DVDAUDIO
button on the
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images depending on how the
disc was manufactured.
40
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 44
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button
twice.
2
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
Subtitle Language Selection Function
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
SP 02/ 03
2
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
OFF
Note
• You can use the
FR 03/ 03
OFF / 03
•
41
SUBTITLE button on the
remote control to select a
subtitle language.
Depending on the disc, the
Subtitle and Audio
Language functions may
not work.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 45
Moving Directly to a Scene/Song
DVD
1
CD
Moving to a Title/Track
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor , buttons
or numeric buttons to select
the desired chapter and
then press ENTER button.
01/05
MP3
025/040
0:00:01
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
03/05
001/002
0:00:01
3
1/1
01/05
Moving to a Specific Time
5
1/1
025/040
1:17:30
001/040
0:00:01
1/1
Moving to a Specific Time
Press Cursor ,
buttons to move to
time.
01/05
Press Cursor ,
buttons to move to
Chapter ( )
display.
6
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
1/1
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
from the disc information screen.
Note
• You can press
•
on the remote
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
,
.
42
OPERATION
Moving to a Chapter
4
2
Moving to a Chapter
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 46
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select a disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
3
43
Press Cursor , ,
, buttons to
select the desired
item.
4
Press ENTER
button.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 47
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
OPERATION
Press MENU button to exit the setup screen.
44
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 42
Setting the Language
OSD language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
45
45P~82P(DS1000)-sea
3
9/15/04 2:44 PM
Press ENTER
button.
4
Page 43
Press Cursor ,
button to select the
desired item and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
SETUP
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
46
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 44
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
In Stop mode,
press MENU
button.
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
be taken to the previous screen.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
47
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 45
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
•You can enjoy the wide screen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
•Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
SETUP
4:3PS
(4:3 Pan&Scan)
•You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
48
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 46
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
49
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
45P~82P(DS1000)-sea
3
9/15/04 2:44 PM
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
Page 47
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
SETUP
Note
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
50
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 48
Setting the Password
You can set the password for the Parental (rating level) setting.
1
Note
51
Press MENU button.
2
• The password is set to "7890" by default.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
45P~82P(DS1000)-sea
3
9/15/04 2:44 PM
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
4
Page 49
Press ENTER
button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
52
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 50
Setting the Wallpaper
JPEG
DVD
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
2
Press LOGO
button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• The selected wallpaper will be
displayed.
4
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Select this to set the
Samsung Logo image as
your wallpaper.
53
Press OPEN/
CLOSE to close
the disc tray.
Select this to set the desired
image as your wallpaper.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 51
To Change the Wallpaper
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
SETUP
1
In Stop mode,
press MENU
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
54
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 52
DVD Playback Mode
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the MENU
button while the
disc tray is open.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Note
• DVD Play mode is set to DVD Audio as factory default setting.
55
45P~82P(DS1000)-sea
3
9/15/04 2:44 PM
Press Cursor
button to move to
‘DVD TYPE’ and
then press ENTER
button.
Page 53
4
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
• Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
SETUP
•
contents contained in a DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
56
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 54
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
1
3
In Stop mode,
press MENU
button.
In the Speaker
Setup, press the
ENTER button again.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
57
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 55
Setting the Test Tone
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote control.
Press TEST TONE button.
•
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
58
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 56
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
59
45P~82P(DS1000)-sea
3
9/15/04 2:44 PM
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Page 57
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise, change the setting according to
the table.
Distance between Df and Dc
0 inch
13.6 inches
27.2 inches
40.8 inches
4.5 feet
5.6 feet
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0 inch
40.8 inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
60
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 58
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
1
In Stop mode,
press MENU
button.
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
4
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
61
45P~82P(DS1000)-sea
Method 2
9/15/04 2:44 PM
When manually adjusting with the SOUND EDIT button
Adjusting Front Speaker Balance
1
Page 59
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Rear Speaker Balance
2
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Center Speaker Level
3
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Rear Speaker Level
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
Note
• The adjustments will appear on the main unit, not on your TV screen.
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• You can adjust volume level from -6dB to +6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
62
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 60
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
3
In Stop mode,
press MENU
button.
Press Cursor
button to move to
‘DRC’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor ,
to adjust the ‘DRC’.
• Pressing the Cursor
button
increases the compression, and
pressing the Cursor
reduces it.
63
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 61
AV SYNC Setup
Video may lag behind the audio if the unit is connected to a digital TV.
If this occurs, adjust the audio delay time to sync up with the video.
1
Press the MENU button.
• Setup menu appears.
• AV-SYNC screen appears.
• 'Audio' menu appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms and
300 ms. Set it for the best sync up with audio.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
64
SETUP
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 62
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
•
PL II MODE button.
Each time the button is pressed, the mode changes as follows.
• MUSIC: When listening to music, you can experience sound effects as if you are
listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five
speakers, while using just the front left and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
• STEREO: Select this to listen to sounds from the front left and right speakers and the
subwoofer only.
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
65
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 63
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
Press
PL II MODE
button to select ‘MUSIC’
mode.
1
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
CMX
PEG-2 AAC
CMX
MPEG-2 AAC MPEG
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the next mode.
SETUP
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select between 0 and 6.
DSP
CMX
MPEG-2 AAC MPEG
TA
TUNED
CMX
MPEG-2 AAC MPEG
Note
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
66
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 64
Auto Sound Calibration Setup
* This function is available only for DVD/CD playback.
Auto Sound Calibration
By setting the auto sound calibration function just once when you relocate or install the unit, you can have
the unit automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create 5.1-channel sound field optimized for the listener's environment.
* The following images are for illustrative purposes only and may differ from the actual product.
Auto Sound Calibration
Microphone
L: Front Speaker (L)
C: Center Speaker
LS: Rear Speaker (L)
Note
R: Front Speaker (R)
SW: Subwoofer
RS: Rear Speaker (R)
• If you purchased the unit for the first time or initialized it, pressing the Auto Sound Calibration button without
•
•
connecting the auto sound calibration microphone will display the message "PLEASE SET ASC FUNCTION FIRST"
in the display.
Because the volume level of the tone is fixed during the auto sound calibration setup, you cannot adjust the volume
using the volume control buttons.
If the auto sound microphone is disconnected during the auto sound calibration setup, the setup will be cancelled.
To Turn the Sound Logo On/Off
When you turn on the power, the unit produces a sound logo after
the disc is read to notify that the unit is optimized for playback.
1
Press and hold ASC button.
press ASC button.
2 Briefly
Each
time
the button is pressed, the selection alternates
•
67
•
between S.LOGO ON and S.LOGO OFF.
If you select "S.LOGO ON", a sound logo will be output
when the disc reading is finished after power-on. If you
select "S.LOGO OFF", no sound logo will be output.
To Verify the Auto Sound Calibration
1
Press and hold ASC button twice.
• "ASC CHECK" appears in the display.
press ASC button.
2 Briefly
• Distance and level values specified for
each channel will appear in the display.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
1
2
3
Page 65
Plug the auto sound calibration
microphone into the auto sound
calibration input jack.
Place the auto sound calibration
microphone at the listener's position.
Adjust the volume control on the main
unit as follows:
• If the distance between the listener and the speaker is over 16.5 feet:
Set the main unit's volume to over 25.
•If the distance between the listener and the speaker is 10 to 16.5 feet:
Set the main unit's volume to 25.
• If the distance between the listener and the speaker is below 10 feet:
Set the main unit's volume to 15.
4
Press ASC button.
• The tone will be output twice, in the given order (L ➝ C ➝ R ➝ RS
•
➝
LS ➝ SW), and 5.1-channel sound field is optimized automatically.
The auto sound calibration setup takes about 2 minutes to complete.
A tone is output.
5
A result for each speaker is displayed.
When the message "REMOVE MIC"
appears in the display, unplug the auto
sound calibration microphone.
To cancel the auto sound calibration setup, press ASC button.
• The tone output stops, "CANCEL ASC" appears in the display followed by "REMOVE MIC", and the setup is cancelled.
To listen in the auto sound calibration mode, briefly press ASC button.
• The selection alternates between ASC ON and ASC OFF in the display.
• If you select "ASC ON", you will hear sound in the auto sound calibration mode.
If you select "ASC OFF", you will hear sound in the mode set in the audio setting of the setup screen.
68
SETUP
A bell sounds and the
setup finishes.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 66
Live Surround Mode
SUPER 5.1
You can reproduce a 2-channel sound source, such
as CD, and radio broadcast, in 5.1-channel
surround sound.
Press SUPER5.1
button.
• Each time the button is pressed, the
•
selection alternates between SUPER
5.1 and SUPER OFF.
Select "SUPER 5.1" to play 2-channel
sound in 5.1 channels.
Note
MUSIC
MOVIE
If you press the MUSIC button when listening to a
You can select from 3 different modes of sound
2-channel sound source, it will be reproduced in
field for movies.
5.1-channel surround sound so that you can enjoy a
dynamic sound with a sense of presence.
Press MUSIC button.
• Each time the button is pressed,
the selection changes as follows:
LIVE ➝ JAZZ ➝ ROCK ➝
CLASSIC➝DISCO➝ LSM OFF.
Press MOVIE
button.
• Each time the button is pressed, the
selection changes as follows:
CINEMA ➝ STADIUM ➝ LSM OFF.
• When you insert a DVD recorded in 2-channel or multi-channel format and press the
SUPER 5.1 button, the message "THIS FUNCTION APPLIES ONLY 2CH SOURCE"
appears in the display and it will not work.
69
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 67
Virtual Headphone Function
Use headphones (not supplied) for private listening pleasure.
You can enjoy a dynamic sound effects similar to that of 5.1 channel
surround sound using conventional stereo headphones.
1
Plug the
headphones into the
headphone jack.
• You can purchase headphones
from most Electronics stores.
2
Press V-H/P
button.
• Each time the button is pressed, the
selection alternates between V-H/P
ON and V-H/P OFF.
SETUP
Note
• Do not listen at extremely high volume levels when using headphones.
Extended, high-volume listening can lead to permanent hearing loss.
• VIRTUAL HEADPHONE ON: Select to enjoy a 5.1-channel surround sound that
•
gives the feeling of being in a baseball park or
concert hall.
VIRTUAL HEADPHONE OFF: Select to listen to a standard 2-channel stereo
sound.
70
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 68
Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control
1
2
Press TUNER
button.
Tune in to the
desired station.
Automatic Tuning 1
• The selection toggles back
and forth between "FM" each
time the TUNER button is
pressed.
Automatic Tuning 2
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
71
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 69
Presetting Stations
You can store up to 15 FM stations.
Example: Presetting FM 89.1 in the memory
1
Press the TUNER
button and select
the FM band.
2
3
Press
to
select "89.10".
• Refer to Step 2 on page 71 to
Press the TUNER
MEMORY button.
• “PRGM” flashes in the display.
automatically or manually tune in
to a station.
4
Press
to select preset
number.
15.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
RADIO OPERATION
• You can select between 1 and
5
Press the TUNER
MEMORY button
again.
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
on the
72
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 70
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
•"SLEEP" will be displayed. Each time the button is pressed
the preset time changes as follows:
10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
73
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 71
Adjusting Display Brightness
Touch your hands to the front of main unit to automatically turn
on the Display and Operation Buttons.
Press DIMMER button.
• Press the DIMMIER button to toggle between DIMMER AUTO
➝ DIMMER ON ➝ DIMMER OFF on the Display.
DIMMER AUTO : Touch your hands to the operation buttons,
and it will turn on for about 10 seconds and
then turn off.
DIMMER ON : Operation buttons are always turned on.
DIMMER OFF : Operation buttons are always turned off.
Note
• In DIMMER AUTO mode, if you touch the LED buttons on the
main unit once, firstly the LED brighten,and then touch again the
function will work.
Mute Function
This is useful when answering the door or a
telephone call.
MISCELLANEOUS
Press MUTE button.
• ‘MUTE’ flash in the display.
• To switch the sound back on (at the same volume as
before), press MUTE again or the VOLUME buttons.
74
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 72
Operating a TV with the Remote Control
When operating a TV with the remote control
1
Press the TV/DVD RECEIVER button to make the
TV indicator on the remote control flash.
TV
DVD RECEIVER
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
5
Point the remote control toward the TV and
press POWER. If the TV turns off or on, the
setting is complete.
• You can use the
POWER, TV/VIDEO, VOLUME, CHANNEL, and
Numeric buttons (0~9).
Note
• The remote control may not work on some brands of TVs. Also some operations may not be
75
possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 73
TV Brand Code Number
No.
Brand
Code
No.
1
SAMSUNG
00(Initial Value), 01, 02, 03, 04, 05, 73
2
ANAM
06~11, 59
3
DAEWOO
4
LG
5
HITACHI
23, 40, 41, 49
6
JVC
24, 55
7
SHARP
27, 33, 34, 35, 54
8
SONY
9
TOSHIBA
10
SANYO
27, 30, 31, 32
11
MITSUBISHI
05, 27, 28
Brand
Code
30
BRANDT
41
31
FERGUSON
41
12~18, 20, 21
32
PIONEER
41, 48, 74
05, 20, 21, 22, 53
33
TELEAVA
41
34
FINLUX
05, 42, 47
35
FISHER
31
36
AKAI
31
27, 36
37
YOKO
05
27, 37, 42, 43, 44, 46
38
PHONOLA
05, 45, 47
39
RADIOLA
05, 45
40
SCHNEIDER
05
12
MATSUSHITA
09, 26
41
NEWSAN
58
13
TELEFUNKEN
41, 49, 51, 57
42
CONTINENTAL EDISON
49
14
RCA
29, 61
43
SALORA
48
15
PANASONIC
07, 09, 26, 48, 49, 50
44
SELECO
48
SABA
40, 41, 47, 48, 49
45
NOKIA
48
17
PHILIPS
05, 45, 47, 64, 65, 66, 67, 68, 69
46
REX
48
18
GRUNDIG
39, 42, 46, 70, 71, 72
47
MIVAR
46
19
ZENITH
38
48
IMPERIAL
46
20
MIVAL
52
49
CGE
46
21
NOBLEX
56
50
BANG & OLUFSEN
47
22
EMERSON
19
51
BRIONVEGA
47
23
MAGNAVOX
25
52
FORMENTI
47
24
LOEWE
05, 60
53
METZ
47
25
THOMSON
40, 41, 49, 62, 63
54
WEGA
47
26
NORDMENDE
40, 41, 49
55
RADIOMARELLI
47
27
LOEWE OPTA
36, 47, 05
56
SINGER
47
28
BLAUPUNKT
39
57
SINUDYNE
47
29
SIEMENS
39
MISCELLANEOUS
16
76
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 74
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Is the region code of the disc "1" or "ALL"?
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
motion playback.
Sound is not produced.
Sound can be heard only
from a few speakers and not
all six.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
• Was the DVD player suddenly moved from a cold place to a warm
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there a "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
77
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
•
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 75
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor
and picture is shaking.
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Make sure that the disc is not a PAL- disc.
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Is the remote control being operated within its operation range of
The remote control does
not work.
angle and distance?
• Are the batteries exhausted?
• Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
Audio language and
subtitles do not work.
Menu screen does not appear even
when the menu function is selected.
Aspect ratio cannot be
changed.
• Audio language and subtitles will not work for DVDs not containing
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna
(Example: The power goes out or
strange noise is heard.)
• Are you using a disc that does not contain menus?
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
78
MISCELLANEOUS
• The DVD player is not
working normally.
them, and depending on the disc, they may work differently.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 76
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Caution
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts inside the
•
79
player. When condensation forms inside the player, the player may not operate
correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours
with the power on.
Separate accessories such as DMI Video/Audio cables, S-Video connection
cables, component lines, optical cables and headphones are available at
electronic stores or from Internet online services.
You may contact a Samsung electronic store or service center.
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 77
Specifications
Power Consumption
G
E
N
E
R
A
L
Weight
MAIN UNIT
: 5.5Ibs
VERTICAL STAND
: 14.0Ibs
HORIZONTAL STAND : 3.3Ibs
T
F U
N
M E
R
V
I
D
E
O
30W
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Dimensions (W x H x D)
7.1 x 19.7 x 2.7 inches
Operating Temperature Range
41°F ~ 95°F
Operating Humidity Range
10% ~ 75%
Usable Sensitivity
10dB
S/N Ratio
60dB
Distortion
0.5%
Composite Video
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Component Video
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
HDMI
Impedance: 85~115Ω
Power Consumption
150W
Front speaker output
100W x 2(4Ω)
Center speaker output
100W(4Ω)
Rear speaker output
100W x 2(4Ω)
Subwoofer speaker output
150W(3Ω)
Frequency range
20Hz~20kHz
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
5.1ch speaker system
Speaker system
Front/Center/Rear speaker
Subwoofer speaker
Impedance
4Ω x 5
3Ω
Frequency range
150Hz~20kHz
30Hz~200Hz
Output sound pressure level
82dB/W/M
85dB/W/M
Rated input
100W
150W
Maximum input
200W
Front/Rear 2.7 x 54.6 x 5.7 inches
300W
Dimensions (W x H x D)
Center
Weight
16.2 x 3.2 x 6.1 inches
Front/Rear 13.22 Ibs
Center
3.3 Ibs
9.8 x 18.1 x 19.8 inches
25.3 Ibs
80
MISCELLANEOUS
S
P
E
A
K
E
R
S
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 78
Notes on Terminology
ANGLE
CHAPTER
NUMBER
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
81
45P~82P(DS1000)-sea
9/15/04 2:44 PM
Page 79
SAMSUNG DVD PLAYER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
1-800-SAMSUNG (1-800-726-7864) and www.SAMSUNGUSA.com
82
MISCELLANEOUS
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
1p~44p(DS1000)-sea
9/15/04 2:43 PM
Page 2
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
AH68-01544R
Download PDF

advertising