XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 2 5.1Ch Stylish Home Theater System HT-XQ100 SAMSUNG ELECTRONICS CANADA, INC. HEADQUARTERS 55 Standish Court Mississauga, Ontario L5R 4B2 Canada TEL: 1-905-542-3535 www.samsung.ca SERVICE DIVISION 55 Standish Court Mississauga, Ontario L5R 4B2 Canada 1-800-SAMSUNG (1-800-726-7864) Instruction Manual COMPACT AH68-01852S DIGITAL AUDIO XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 4 Safety Warnings CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ENG Note to CATV system installer : This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. PREPARATION CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the Home Theater to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. During thunderstorms, disconnect AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. Phones WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 1 Protect the player from moisture(i.e. vases) , and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc has been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using. The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash. 2 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 6 Features Contents ENG Multi-Disc Playback & FM Tuner USB Host Play You can enjoy media files such as pictures, movies and tunes saved in an MP3 player, digital camera or USB memory by connecting the storage device to the USB port of the home theater. DVD-Audio compatible Experience the super high-quality audio performance of DVD-Audio. The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range, low-level resolution and high-frequency detail. Dolby Pro Logic II Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro Logic. DTS (Digital Theater Systems) DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency 5.1 channel sound. TV Screen Saver Function The HT-XQ100 automatically brightens and darkens your TV screen after 3 minutes in the stop mode. The HT-XQ100 automatically switches itself into the power saving mode after 20 minutes in the screen saver mode. Power Saving Function The HT-XQ100 automatically shuts itself off after 20 minutes in the stop mode. Customized TV Screen Display PREPARATION SETUP Safety Warnings .................................................................1 Precautions.........................................................................2 Features .............................................................................3 Notes on Discs ...................................................................5 Description..........................................................................7 Setting the Language .........................................................43 Setting TV Screen type ......................................................45 Setting Parental Controls (Rating Level)............................47 Setting the Password .........................................................48 Setting the Wallpaper .........................................................49 DVD Playback Mode ..........................................................51 Setting the Speaker Mode..................................................52 Setting the Delay Time .......................................................53 Setting the Test Tone..........................................................55 Setting the DRC (Dynamic Range Compression) ..............56 Setting the Audio ................................................................57 AV SYNC Setup .................................................................59 Sound Field (DSP)/EQ Function ........................................60 Dolby Pro Logic II Mode.....................................................61 Dolby Pro Logic II Effect.....................................................62 CONNECTIONS Before Connecting the Speakers .......................................11 Installing the DVD player....................................................13 Connecting the optional Wireless Receiving Amplifier .......14 Connecting the Video Out to TV ........................................16 HDMI Function....................................................................17 Connecting External Components......................................19 Connecting the FM Antenna...............................................20 OPERATION Before Using Your Home Theater ......................................21 Disc Playback .....................................................................24 MP3/WMA-CD Playback ....................................................25 Displaying Disc Information................................................26 JPEG File Playback............................................................27 DivX Playback ....................................................................29 Checking the Remaining Time ...........................................31 Fast/Slow Playback ............................................................32 Skipping Scenes/Songs......................................................32 Repeat Playback ................................................................33 A-B Repeat Playback .........................................................34 Step Function .....................................................................35 Angle Function....................................................................35 Zoom (Screen Enlarge) Function .......................................36 EZ VIEW Function..............................................................36 Bonus Group / Navigating Pages.......................................37 Selecting Audio/Subtitle Language.....................................38 Playing Media Files using the USB HOST feature.............39 Moving Directly to a Scene/Song .......................................41 Using Disc Menu ................................................................42 Using the Title Menu...........................................................42 RADIO OPERATION Listening to Radio...............................................................63 Presetting Stations .............................................................64 MISCELLANEOUS Convenient Functions.........................................................65 Operating a TV with the Remote Control ...........................67 Before Calling for Service...................................................69 Cautions on Handling and Storing Discs............................71 Language Code List ...........................................................72 USB Host Feature Supported Products .............................73 Specifications .....................................................................74 The HT-XQ100 allows you to select your favorite image during JPEG and DVD playback and set it as your background wallpaper. HDMI HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture. Optional Wireless receiver amplifier Samsung ’s optional rear-channel wireless module does away with cables running between your DVD receiver and rear-channel speakers. Instead,the rear speakers connect to a compact wireless module that communicates with your DVD receiver. 3 4 PREPARATION The HT-XQ100 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD-R/RW, with a sophisticated FM tuner, all in a single player. XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 8 Notes on Discs ENG DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital sur- 1 ~ 6 DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player. (Your DVD player will only play DVDs that are labeled with identical region codes.) Mark (Logo) Recorded Signals Disc Size Audio + Video 3 1/2" COMPACT Audio + Video VIDEO-CD DIGITAL VIDEO COMPACT AUDIO-CD Audio DIGITAL AUDIO DivX CD-R Discs • Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be played back. not be able to fully play the disc. 5" DVD This product does not support Secure (DRM) Media files. • Some CD-RW (Rewritable) media, may not be playable. • Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may Playable Discs Disc Type Disc Recording Format PREPARATION round sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. MPEG4 MP3 Max. Playing Time Approx. 240 min. (single-sided) Approx. 480 min. (double-sided) Approx. 80 min. (single-sided) Approx. 160 min. (double-sided) 5" 74 min. 3 1/2" 20 min. 5" 74 min. 3 1/2" 20 min. 5" 74 min. 3 1/2" 20 min. CD-R MP3 Discs • Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. • MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). • Use discs recorded with a compression/decompression data rate greater than 128Kbps. • Only files with the ".mp3" and ".MP3" extensions can be played. • Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment. • If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played. • For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback. • A maximum of 500 tracks can be played per CD. • A maximum of 300 folders can be played per CD. CD-R JPEG Discs Do not use the following types of disc! • LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player. If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen. • DVD discs purchased abroad may not play on this player. If such discs are played, a "WRONG REGION CODE" message appears on the TV screen. Copy Protection • Only files with the ".jpeg" and ".JPEG" extensions can be played. • If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. • Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played. • JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). • Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment. • A maximum of 9,999 images can be stored on a single CD. • When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played. • Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all. CD-R/RW DivX Discs • • 5 Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. • Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user might not be played. • Software update for unsupported formats is not supported. (Example: QPEL, GMC, resolution higher than 720 x 480 pixels, etc.) • Sections with high frame rate might not be played while playing a DivX file. • For more information about the formats authorized by DivX Networks, Inc., visit "www.divxnetworks.net". 6 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 10 Description —Side Panel— Eject button Disc Insert Hole Power ( Video Output Connector Display Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector. Function button ) button Volume control button External Digital Optical Input Connector Use this to connect external equipment capable of digital output. Headphone Jack External Audio Input Connectors TX Card Connector Component Video Output Connectors USB Port Connect a TV with component video inputs to these jacks. HDMI OUT Port FM Antenna Connector button Play/Pause ( ) button Stop ( ) button Tuning up & Skip ( ) button Tuning down & Skip ( ) button —Rear Panel— 5.1 Channel Speaker Output Terminals Cooling Fan Cooling Fan Accessories Remote Control 7 Video Cable FM Antenna User's Manual 8 PREPARATION —Front Panel— ENG XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 12 Description ENG PREPARATION —Remote Control— Insert Remote Batteries TV button DVD Receiver button DVD button TUNER button AUX button USB button EJECT button POWER button 1 Remove the battery cover in the direction of the arrow. TV/VIDEO button 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –). 3 Replace the battery cover. Number(0~9) buttons REMAIN button STEP button SEARCH buttons CANCEL button REPEAT button Play/Pause button Stop button Tuning Preset/CD Skip button VOLUME button MENU button TUNING/CH button MUTE button RETURN button Caution Follow these precautions to avoid leaking or cracking cells: • Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–). • Use the correct type of batteries.Batteries that look similar may differ in voltage. • Always replace both batteries at the same time. • Do not expose batteries to heat or flame. Cursor/Enter button INFO button PL II EFFECT button PL II MODE button TUNER MEMORY button ZOOM button SLEEP button SLOW, MO/ST button AUDIO button SUB TITLE button DSP/EQ button TEST TONE button SOUND EDIT button Range of Operation of the Remote Control The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor. DIGEST button SD/HD button LOGO button SLIDE MODE button DIMMER button 9 HDMI AUDIO, SELECT button EZ VIEW button 10 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 14 Before Connecting the Speakers ENG Center Speaker Front Speaker (R) Front Speaker (L) CONNECTIONS Subwoofer Speaker Packages Rear Speaker (R) Rear Speaker (L) Please confirm that all the following contents are included in the package. Speaker Connecting the Speakers 1 Front Speaker (2EA) Rear Speaker (2EA) Subwoofer Speaker Center Speaker Press down the terminal tab on the back of the speaker. Speaker Cable (6EA) 2 Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. Black Assembling the Speakers 3 Connect the connecting plugs to the back of the Home Theater. • Make sure the colors of the speaker terminals match the colors of the connecting plugs. Red or Set the front speaker on the front stand. Caution To mount the speakers on the wall • Do not let children play with or near the speakers. Drive a screw into the wall for each speaker and then hook the front speaker over them. • When connecting the speaker wires to the speakers, They could get hurt if a speaker falls. 11 Hook the speakers so that the screws are in the position of the figure. make sure that the polarity (+/–) is correct. Note • If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set. 12 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 16 Installing the DVD player Connecting the optional Wireless Receiving Amplifier To connect the rear speakers wirelessly, you have to additionally purchase the wireless receiving module and TX card from your Samsung retailer. 1 Separate the rear cover(A). (A) Front Speaker (R) Front Speaker (L) Center Speaker 2 Remove the 1 screw of the cover(B). (B) 3 Put the speaker cable connected to the Speaker OUT port into the left groove. Subwoofer Rear Speaker (L) Rear Speaker (R) WIRELESS RECEIVER MODULE 4 5 Put the cables connected to the Video OUT, Component OUT and Audio IN ports into the right groove. 1 Connect the front, center and subwoofer speakers, referring to page 12. 2 Insert the TX card into the TX card connection port on the back of the main unit. • Hold the TX card so that the slanted side faces Fasten the 1 screw on the cover(B). TX CARD upward and insert the card into the port. • The TX card enables communication between the main unit and the wireless receiver. 6 3 Connect the left and right rear speakers to the wireless receiving module. 4 Plug the power cord of the wireless receiving module in the wall outlet and switch the power switch ‘ON’. Close the rear cover(A). Caution • Do not insert a card other than the TX card dedicated for the product. The product might be damaged or it may not be removed easily. • Do not insert the TX card upside down or in reverse direction. • Insert the TX card when the main unit is turned off.Inserting the card when it is turned on may cause a problem. • If the TX Card is inserted in the main unit, the rear speakers don't output sounds. 13 14 ENG XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 18 When you have purchased the wireless receiving module (SWA-3000) Connecting the Video Out to TV ENG Choose one of the three methods for connecting to a TV. Resetting Wireless Communication Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not light up and the "REAR CHK" message blinks on the main unit's display. Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode. 1 CONNECTIONS With the main unit turned off, press and hold the remote control's REMAIN button for 5 seconds. • Press the button until the POWER( ) indicator lights up blue. (The indicator will turn off in 1 second.) 2 METHOD2 With the wireless receiver module turned on, use a ball point pen or a pair of tweezers to press the RESET button on the back of the unit. METHOD 3 METHOD 1 (supplied) WIRELESS RECEIVER MODULE • The Standby/On LED on the front panel of the wireless receiver module blinks 2 times. 3 Turn on the main unit. TV • The Link LED of the wireless receiver module is lit and the setup is finished. • If Power Standby mode continues, repeat Steps 1 to 3 above. Caution • When the wireless receiving module setting is complete, no audio signal is output from the Rear Speaker OUT ports on the back of the main unit. • The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and moisture. • For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions. • Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only. • In 2-CH mode, no sound will be heard from the wireless rear speakers. METHOD 1 Composite Video ....... (Good Quality) - Connect the supplied video cable from the VIDEO OUTjack on the side panel of the system to the VIDEO IN jack on your TV. METHOD 2 Component ....... (Better Quality) - If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Yjacks on the side panel of the system to the corresponding jacks on your TV. METHOD 3 HDMI ....... (Best Quality) Note - Connect the HDMI out to the HDMI input on your TV. • Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main unit, some sound interruption may be heard due to interference. • If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same • frequency (2.4GHz) near the system, some sound interruption may be heard due to interference. The transmission distance of radio wave is about 33 feet, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. 15 Note • This product operates in Progressive scan mode(480p Only ) for Component Output. • If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or display nothing. 16 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 20 HDMI Function HDMI Function What is HDMI (High Definition Multimedia Interface)? Resolution Selection This device transmits DVD video signal digitally without the process of converting to analog. You can get sharper digital pictures by connecting the video to your TV using an HDMI connection cable. • This function allows the user to select screen resolution for HDMI output. • The audio signals transmitted over the HDMI Cable can be toggled ON/OFF. In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)button on the remote control. • Resolutions available for the HDMI output are 480P, 720P and 1080i. • SD(Standard Definition) resolution is 480p and HD(High Definition) resolution is 720p/1080i. Example: If the TV supports resolution up to 480p: Press the HDMI AUDIO button on the remote control. Press the SD/HD button. • This toggles between “AUDIO ON” and “AUDIO OFF” on the display. • AUDIO ON : Both video and audio signals are transmitted over the • A 480p video signal is output through the HDMI output. • If the TV does not support the configured resolution, you will not be able • HDMI connection cable, and audio is output is through your TV speakers only. AUDIO OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home theater speakers only. CONNECTIONS HDMI Audio ON/OFF function ENG to see the picture properly. Note • Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a 576i(480i) DVD resolution output to 480p/720p/1080i. • You do not have to make separate adjustments, since the Home Note • The default setting value of this product is HDMI AUDIO OFF. • HDMI AUDIO is automatically down-mixed to 2ch for TV speakers. • If you turn the unit off and on, or switch functions when the HDMI AUDIO is set to ON, the HDMI AUDIO is automatically set to OFF. Theater and TV will be automatically adjust themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has an HDMI Input jack, output is automatically converted to 1080i resolution (if supported by the TV).) • For component video output, only 480P is supported. • When both HDMI and COMPONENT jacks are connected, COMPONENT video is not displayed. • See your TV owner's manual for more information on how to select the TV's Video Input source. 17 18 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 22 Connecting External Components Connecting the FM Antenna ENG Connecting an External Digital / Analog Component Example: Digital signal components such as a Set-Top Box or CD Recorder. Analog signal components such as a VCR. CONNECTIONS FM Antenna (supplied) Audio Cable Optical Cable (not supplied) 1 (not supplied) If the external analog component has only one Audio Out, connect either left or right. Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component. 1 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal. 2 Slowly move the antenna wire around until you find a location where reception is good, then 2 Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component. 3 Press AUX on the remote control to select ‘DIGITAL IN / AUX’ input. fasten it to a wall or other rigid surface. • Be sure to match connector colors. • Each time the button is pressed, the selection changes as follows: D.IN • You can also use the FUNCTION button on the main unit. Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. ➝ AUX Please observe the following cautions for your safety. The mode switches as follows: DVD ➝ D.IN ➝ AUX ➝ USB ➝ FM • Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it. • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a Note 19 newspaper or cloth, heat may build up inside the unit and fire may result.) • You can connect the Video Output jack on your VCR to the TV, and connect the Audio Output jacks on the VCR to this product. Notes • This unit does not receive AM broadcasts. 20 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 24 Before Using Your Home Theater ENG Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. To Operate the TV and DVD Player with a Single Remote Control 2 Press TV button to set the remote to TV mode. 4 Press TV/VIDEO button to select VIDEO mode on your TV. 5 Press DVD RECEIVER button to switch to DVD RECEIVER mode. 3 Press the POWER button to turn on your Samsung TV with this remote. 6 Press FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback. VIDEO Note • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons. • By default, the remote control is set to work with Samsung TVs. See page 68 for more information about remote control operation with other manufacturer's TVs. 21 22 OPERATION 1 Plug the main unit's power cord into the AC power supply. XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 26 Before Using Your Home Theater Disc Playback ENG Disc terminology Groups and tracks (DVD-AUDIO) • DVD-audio is divided into several large sections called "groups" and smaller sections called "tracks". Numbers are allotted to these sections. These numbers are called "group numbers" and "track numbers". GROUP 1 TRACK 1 TRACK 2 1 Load a disc vertically into the Disc Insert Hole. 2 To eject the disc, press the EJECT button • Insert a disc so that the label side faces forward. GROUP 2 TRACK 3 TRACK 1 TRACK 2 Titles and chapters (DVD-VIDEO) • DVD-video is divided into several large sections called "titles" and smaller sections called "chapters". Numbers are allotted to these sections. These numbers are called "title numbers" and "chapter numbers". CHAPTER 2 OPERATION TITLE 1 CHAPTER 1 TITLE 2 CHAPTER 3 CHAPTER 1 CHAPTER 2 DVD VCD CD • Playback starts automatically. Tracks (Video and music CDs) • Video and music CDs are divided into sections called "tracks". Numbers are allotted to these sections. These numbers are called "track numbers". TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 Note • Depending on the content of the disc, the initial screen may appear different. Files (DivX) • DivX is divided into sections called "files". Numbers are allotted to these sections. These numbers are called "file numbers". FILE 1 Note 23 Caution • Avoid getting fingerprints on the writing surface of a disc. It may cause the disc to not read properly. FILE 2 • In this manual, the instructions marked with "DVD ( DVD )" are applicable to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs. Where a particular DVD type is mentioned, it is indicated separately. • Depending on the content of the disc, the initial screen may appear different. 24 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 28 MP3/WMA-CD Playback Displaying Disc Information Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3/WMA format can be played. 1 Load the MP3/WMA disc. • The MP3/WMA menu screen will appear • • and playback will start. The appearance of the menu depends on the MP3/WMA disc. WMA-DRM files cannot be played. 2 ENG You can view disc playback information on the TV screen. In Stop mode, use to select the album, and then press the ENTER button. • Use Press INFO button. • Each time the button is pressed, the display changes as follows: DVD to select the track. VCD CD MP3 DivX DVD RECEIVER JPEG SMART NAVI Something like you Back for good Love of my life More than words 3 To change the album, use to select another album in Stop mode, and then press the ENTER button. • 4 The information Display disappears from the screen • Depending on the disc, the disc Note • Depending on the recording mode, some MP3/WMA-CDs may not be played. • Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc. • • What is a Group? A section of tracks contained in a DVD-AUDIO disc. • What is a Title? Note repeat Steps 2 and 3 above. appears on the TV screen! If this symbol appears on the TV screen while buttons are being operated, that operation is not possible with the disc currently being played. Press the STOP button to stop playback. • To select another album and track, The information Display disappears from the screen information display may appear different. Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC. A movie contained in a DVD-VIDEO disc. • What is a Chapter? Each title on a DVD disc is divided into several smaller sections called "chapters". • What is a Track (File)? A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3-CD. Screen Display To play a file icon in the screen, Press the button when it is in stop status and select a desired icon from the top part of the menu. • To play music files only, select the • To view image files only, select the • To view movie files only, select the Icon. • To select all files select the 25 Icon. Icon. Icon. • Music File Icon • Image File Icon • Movie File Icon • All File Icon DVD display TITLE display VCD display GROUP display CD display CHAPTER display DVD DVD-AUDIO display AUDIO TRACK (FILE) display ELAPSED TIME display STEREO (L/R) display REPEAT PLAYBACK display DOLBY DIGITAL display AUDIO LANGUAGE display ANGLE display SUBTITLE display 26 OPERATION The information Display disappears from the screen XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 30 JPEG File Playback JPEG Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this Home Theater. ENG Digest Function You can view 9 JPEG images on the TV screen. 1 Slide Mode Press DIGEST button during playback. 2 • JPEG files will be shown in • The selected image is played for 5 seconds before moving 9 windows. 1 Load the JPEG disc. 2 Press SLIDE MODE button. to the next image. To view the previous or next image with 9 windows, press . OPERATION • Playback starts automatically. • Each time the button is pressed, the image makes the transition as follows: Press Cursor , , , buttons to select the desired image and then press ENTER button. Rotate/Flip Function From top to bottom From bottom to top Press Cursor , , , buttons during playback. Rectangular shape in the center button: Flip Vertically Vertical blinds effect Each time a new image is displayed, slide modes (1~11) will be applied randomly and automatically. button: Rotate 90° Counterclockwise Cancels the slide mode. button: Rotate 90° Clockwise Original Image button: Flip Horizontally Press to skip to the next slide. • Each time the button is pressed, the slide moves backward or forward. 27 Note • The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. 28 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 32 DivX Playback Subtitle Display • The functions on this page apply to DIVX disc playback. Press the SUBTITLE button. Skip Forward/Back During playback, press the button. • Goes to the next file whenever you press • ENG button, if there are over 2 files in the disk. Goes to the previous file whenever you press over 2 files in the disk. button, if there are • Each time you press the button, your selection will toggle between “SUBTITLE (1/1, 1/2 ...)” and • If the disc has only one subtitle file, it will be played automatically. • Below for more details concerning Subtitle usage with DIVX discs. “SUBTITLE OFF”. Audio Display Press the AUDIO button. • If there are multiple audio tracks on a disc, you can toggle between them. • Each time you press the button, your selection will toggle between “AUDIO (1/1, 1/2 ...)” and Fast playback To play back the disc at a faster speed, press or during playback. follows: 2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal. •" ”. " is displayed when there is one supported language in the disc. DivX(Digital internet video eXpress) DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio. 1. Supported Formats • This product only supports the following media formats.If both video and audio formats are not 5 Minute Skip function During playback, press the , supported, the user may experience problems such as broken images or no sound. button. • Playback skips 5 minutes forward whenever you press • Playback skips 5 minutes back whenever you press ● Format Supported Versions button. button. ● Press ZOOM button. 2 Press Cursor , , , buttons to move to the area you want to enlarge. • Each time you press the button, your selection will toggle between “ZOOM X2” and “ZOOM OFF”. Note 29 • DIVX file can be zoomed only in ZOOM X2 mode. • DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be playable in this unit. AVI DivX3.11 ~ 5.1 WMV V1/V2/V3/V7 Supported Audio Formats Format Bit Rate Sampling Frequency Zoom Function 1 Supported Video Formats MP3 WMA 80~384kbps 56~128kbps 44.1khz AC3 128~384kbps 44.1/48khz • Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to 720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported. • When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback. 2. Caption Function • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX • media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name. 30 OPERATION • Each time you press either button, the playback speed will change as Note “ XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 34 Checking the Remaining Time Fast/Slow Playback Fast Playback DVD VCD CD Slow Playback MP3 Press the REMAIN button. Press • For checking the total and remaining time of a title or chapter • Each time the button is pressed during playback, being played. ENG . Press SLOW button. • Each time the button is pressed during playback, the playback speed changes as follows: the playback speed changes as follows: DVD VCD DivX Each time the REMAIN button is pressed DVDAUDIO TITLE ELAPSED GROUP ELAPSED TITLE REMAIN GROUP REMAIN CHAPTER ELAPSED TRACK ELAPSED CHAPTER REMAIN TRACK REMAIN Notes • No sound is heard during slow play- Note • During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds. back and step motion playback. • Reverse slow playback does not work with DivX. Skipping Scenes/Songs Press VCD CD MP3 TRACK ELAPSED TRACK REMAIN TRACK REMAIN TRACK ELAPSED . • Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will be played. • You cannot skip chapters consecutively. DVD VCD MP3 TITLE 01/05 CHAPTER 002/040 TOTAL ELAPSED TOTAL REMAIN TITLE 01/05 CHAPTER 004/040 • When watching a VCD with a track 31 longer than 15 minutes, each time is pressed, playback will skip back or forward 5 minutes. 32 OPERATION DVDVIDEO XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 36 Repeat Playback A-B Repeat Playback Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). DVD VCD CD MP3 ENG You can repeatedly play back a designated section of a DVD. JPEG DVD VCD Press REPEAT button. • Each time the button is pressed during playback, the repeat playback mode changes as follows: DVDVIDEO DVDAUDIO Repeat Playback Options CHAPTER Repeatedly plays the selected chapter. 1 Press INFO button twice. 2 Press Cursor button to move to REPEAT PLAYBACK ( ) display. 4 Press ENTER button at the end of the desired segment. • For a VCD, press INFO button once. TITLE Repeatedly plays the selected title. GROUP Repeatedly plays the selected group. MP3 JPEG VCD CD TRACK Repeatedly plays the selected track. DIR Repeatedly plays all tracks in the selected folder. DISC Repeatedly plays the entire disc. 3 Press Cursor , buttons to select ‘A-’ and then press ENTER button at the beginning of the desired segment. • When ENTER button is pressed, the selected position will be stored in memory. • The specified segment will be played repeatedly. A- A-B REPEAT : A—B OFF Cancels Repeat Playback. A -? REPEAT : A— To Select a Repeat Playback Mode in the Disc Information Screen Note • Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on. To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the disc menu. (See page 42.) 1 2 3 4 Press INFO button twice. Press Cursor button to move to REPEAT PLAYBACK ( ) display. Press Cursor button to select the desired Repeat Playback mode. Press ENTER button. To return to normal playback, press Cursor buttons to select OFF. DVD , Note VCD CD • The A-B Repeat function does not operate with MP3, CD or JPEG discs. MP3 and JPEG discs, you cannot select Repeat * For Play from the information display screen. 33 34 OPERATION RANDOM Plays tracks in random order. (A track that has already been played may be played again.) XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 38 Step Function DVD Zoom (Screen Enlarge) Function VCD This function allows you to enlarge a particular area of the displayed image. DVD ENG VCD Press STEP button. • The picture moves forward one frame each time the button is pressed 1 during playback. Note • No sound is heard during slow playback and step motion playback. Press ZOOM button. 2 Press Cursor , , , buttons to move to the area you want to enlarge. 3 Press ENTER button. • Each time the button is pressed, the zoom level changes as follows: SELECT ZOOM POSITION Angle Function DVD This function allows you to view the same scene in different angles. Press INFO button. 2 1/3 3 1/3 Press Cursor , or numeric buttons to select the desired angle. • Each time the button is pressed, the angle changes as follows: 1/3 Note OPERATION 1 Press Cursor button to move to ANGLE ( ) display. • When a DivX disc is being played, only the 2:1 zoom-in is available. EZ VIEW Function DVD Press EZ VIEW button. • Each time the button is pressed, the zoom function will switch between On and Off. • When a movie is played in Widescreen format, black bars at the top and bottom of the TV screen can be removed by pressing the EZ VIEW button. 2/3 3/3 EZ VIEW EZ VIEW OFF Note Note • The Angle function works only with discs on which multiple angles have been recorded. 35 • This function will not work if the DVD is recorded with multi-camera angle format. • Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio. • This feature is not supported for DivX discs. 36 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 40 Bonus Group / Navigating Pages Bonus Group Selecting Audio/Subtitle Language Audio Language Selection Function DVDAUDIO Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for details and the-key number. 1 Press INFO button twice. When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically. 2 ENG DVD Press Cursor , buttons or numeric buttons to select the desired audio language. • Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. SP 2/3 FR 3/3 BONUS GROUP OPERATION KEY NUMBER : Subtitle Language Selection Function Note • If you eject the disc, switch the power off, or unplug the player, you will need to re-enter 1 Press INFO button twice. 3 Press Cursor button or numeric buttons to select the desired subtitle. 2 the key number. Navigating Pages DVD Press Cursor button to move to SUBTITLE ( ) display. DVDAUDIO During playback, press the TUNING/CH button on the remote control. • You can select the desired image from a DVD-Audio disc containing still images. • With some discs, you may not be able to select images. EN 1/3 EN 01/ 03 OFF Note • To operate this function, you can also • press the Select AUDIO or Select SUBTITLE buttons on the remote control. Depending on the disc, the Subtitle and Audio Language functions may not be available. SP 02/ 03 FR 03/ 03 OFF / 03 37 38 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 42 Playing Media Files using the USB HOST feature ENG You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater. 1 Connect the USB device to the USB port on the side of the unit. 2 Compatible Devices 1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disk in Windows (2000 or later) without additional driver installation.) 2. MP3 Player: HDD and flash type MP3 players. 3. Digital camera: Cameras that support USB Mass Storage v1.0. • Cameras that operate as a removable disk in Windows (2000 or later) without additional driver installation. 4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1. • You may experience a difference in playback quality when you connect a USB1.1 device. • For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. 5. USB card Reader: One slot USB card reader and Multi slot USB card reader • Depending on the manufacturer. the USB card reader may not be supported. • If you install multiple memory devices into a multi card reader, you may experience problems. 6. If you use a USB extension cable, the USB device might not be recognized. Press the FUNCTION button on the main unit or the USB button on the remote control to select the USB mode. • “USB” appears on the display screen and then disappears. • USB MENU screen appears on the TV screen and the saved file is played. Supported Formats Still Picture To stop playback, press the STOP ( ) button. Music Safe USB Removal Movie To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable. (1) Press the Stop button twice in a row. The display will show REMOVE ➞ USB. File extension Bit rate Version Pixel Sampling Frequency JPG JPG .JPEG – – 640*480 – 44.1kHz MP3 .MP3 80~384kbps – – WMA .WMA 56~128kbps V8 – 44.1kHz VCD MPG.MPEG .DAT 1.5Mbps VCD1.1,VCD2.0 320*480 44.1KHz WMV .WMV 4Mbps V1,V2,V3,V7 720*480 44.1KHz~48KHz DivX .AVI,.ASF 4Mbps DivX3.11~DivX5.1,Xvid 720*480 44.1KHz~48KHz • Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported. • A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file system is supported.) Skip Forward/Back • When there is more than one file, when you press the • When there is more than one file, when you press the File name • CBI (Control/Bulk/Interrupt) is not supported. (2) Remove the USB cable. During playback, press the OPERATION ● button. button, the next file is selected. button, the previous file is selected. Fast playback To play back the disc at a faster speed, press • Some MP3 players, when connected to this product,may not operate depending on the sector size of their file system. • The USB HOST function is not supported if a product that transfers media files by its manufacturer-specific program is connected. • Does not operate with Janus enabled MTP(Media Transfer Protocol) devices. or • Each time you press either button, the playback speed will change as follows: during playback. • The USB host function of this product does not support all USB devices. For information on the supported devices, see pages 73. 2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal. 39 40 XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 44 Moving Directly to a Scene/Song Using Disc Menu ENG DVD You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. DVD 1 CD Moving to a Title/Track 2 Press INFO button. 01/05 001/040 0:00:37 1/1 Press Cursor , buttons or numeric buttons to select the desired title/track and then press ENTER button. 03/05 001/002 0:00:01 Moving to a Chapter Press Cursor , buttons to move to Chapter ( ) display. 3 1 In Stop mode, press MENU button. • When playing a VCD (version 2.0), this toggles between PBC ON and OFF. 1/1 01/05 001/040 0:00:01 Press Cursor , buttons or numeric buttons to select the desired chapter and then press ENTER button. 01/05 025/040 0:00:01 5 1/1 Press Cursor , buttons to move to time display. supported by the disc, the "This menu is not supported" message appears on the screen. • Press ENTER button. ENTER MOVE EXIT ENTER EXIT Moving to a Specific Time 6 Press the numeric buttons to select the desired time and then press ENTER button. • Disc menu display may be different depending on the disc. Note PBC (Playback Control) Function When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen. PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them. PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD. 01/05 025/040 1:17:30 1/1 01/05 028/040 1:30:00 1/1 Using the Title Menu DVD For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. MP3 JPEG Press the numeric buttons. • The selected file will be played. • When playing an MP3 or JPEG disc, you cannot use , to move to a folder. To move a folder, press (Stop) and then press , . Note 1 In Stop mode, press MENU button. • You can press • on the remote control to move directly to the desired title, chapter, or track. Depending on the disc, you may not be able to move to the selected title or time. 3 Press ENTER button. • The title menu appears. MOVE 41 2 Press Cursor , button to move to ‘Title Menu’. ENTER EXIT MOVE ENTER EXIT Press MENU button to exit the setup screen. Note • Title menu display may be different depending on the disc. 42 OPERATION 4 Moving to a Specific Time • When you select Disc Menu and it is not 3 Press Cursor , , buttons to select the desired item. 1/1 MOVE Moving to a Chapter 2 Press Cursor , buttons to move to ‘DISC MENU’ and then press ENTER button. XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 42 Setting the Language ENG OSD (On-Screen Display) language is set to English by default. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. 3 Select ‘Language’ and then press ENTER button 4 Press Cursor , button to select ‘OSD Language’ and then press ENTER button. 5 Press Cursor , button to select the desired language and then press ENTER button. • Once the setup is complete, the OSD will be English if English has been selected as language. MOVE ENTER EXIT MOVE ENTER EXIT MOVE ENTER RETURN EXIT MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT Press MENU button to exit the setup screen. Note • To select another language, select OTHER and enter the language code of your country. (See page 72 for language codes) AUDIO, SUB TITLE and DISC MENU language can be selected. MOVE ENTER RETURN Selecting the OSD Language MOVE 43 SELECT RETURN EXIT EXIT MOVE ENTER RETURN EXIT Selecting the Audio Language (recorded on the disc) MOVE ENTER RETURN EXIT Selecting the Subtitle Language (recorded on the disc) MOVE ENTER RETURN EXIT Selecting the Disc Menu Language (recorded on the disc) language you selected is * Ifnottherecorded on the disc, menu language will not change even if you set it to your desired language. 44 SETUP Press RETURN button to return to the previous level. XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 44 Setting TV Screen type ENG Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. Adjusting the TV Aspect Ratio (Screen Size) The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor. • For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference. Select "16:9" if you have a widescreen TV. WIDE MOVE 3 ENTER MOVE EXIT Press Cursor button to move to ‘TV DISPLAY’ and then press ENTER button. 4 ENTER • You can enjoy the widescreen aspect. EXIT Press Cursor , button to select the desired item and then press ENTER button. • Once the setup is complete, you will 4:3LB (4:3 Letterbox) 4:3PS (4:3 Pan&Scan) EXIT MOVE SELECT RETURN EXIT SETUP RETURN : Select this to play a 16:9 picture in the pan & scan mode on a conventional TV. • You can see the central portion of the screen only (with the sides of the 16:9 picture cut off). Note ENTER : Select this to play a 16:9 picture in the letter box mode on a conventional TV. • Black bars will appear at the top and bottom of the screen. be taken to the previous screen. MOVE : Select this to view a 16:9 picture in the full-screen mode on your widescreen TV. • If a DVD is in the 4:3 ratio, you cannot view it in widescreen. • Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 45 46 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 46 Setting Parental Controls (Rating Level) Use this to restrict playback of adult or violent DVDs you do not want children to view. 1 In Stop mode, press MENU button. 2 Setting the Password You can set the password for the Parental (rating level) setting. Press Cursor button to move to ‘Setup’ and then press ENTER button. 1 Press MENU button. MOVE MOVE 3 4 Press Cursor , button to select the desired rating level and then press ENTER button. • If you have selected Level 6, you • MOVE EXIT cannot view DVDs with Level 7 or higher. The higher the level, the closer the content is to violent or adult material. EXIT ENTER 3 5 Enter the password and then press ENTER button. Press Cursor button to move to ‘PASSWORD’ and then press ENTER button. Note RETURN EXIT MOVE SELECT RETURN EXIT Press ENTER button. EXIT Enter the password and then press ENTER button. password, and confirm new password. • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen. INPUT NUMBER RETURN • This function works only if a DVD disc contains the rating level information. ENTER RETURN EXIT MOVE SELECT Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. RETURN EXIT INPUT NUMBER RETURN EXIT • The password is set to "7890" by default. EXIT If you have forgotten the rating level password, do the following: • While the player is in the no disc mode, hold the main unit's 47 5 ENTER • The setting is complete. Note ENTER MOVE EXIT ENTER • Enter the old password, a new MOVE MOVE 4 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. SETUP Press Cursor button to move to ‘PARENTAL’ and then press ENTER button. ENTER ENG on the display and all settings will return to the default values. • Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary. button for longer than 5 seconds. “INITIALIZE” appears 48 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 48 Setting the Wallpaper JPEG DVD ENG VCD While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper. Setting the Wallpaper 1 During playback, press PLAY/PAUSE button when an image you like appears. To select one of the 3 wallpaper settings you've made Press LOGO button. 2 1 In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. 3 Press Cursor button to move to ‘LOGO’ and then press ENTER button. • “COPY LOGO DATA” will be displayed on the TV screen. COPY LOGO DATA PAUSE MOVE 3 The power will turn off and then back on. 4 • Press to select the desired ‘USER’, and then press ENTER. 5 ENTER EXIT MOVE ENTER RETURN EXIT Press MENU button to exit the setup screen. SETUP • The selected wallpaper will be MOVE EXIT ENTER • This selects one of the 3 displayed. You can select up to 3 wallpaper settings. wallpaper screens MOVE SELECT RETURN EXIT Press RETURN button to return to the previous level. MOVE 49 SELECT RETURN EXIT Select this to set the Samsung Logo image as your wallpaper. MOVE SELECT RETURN EXIT Press MENU button to exit the setup screen. Select this to set the desired image as your wallpaper. 50 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 50 DVD Playback Mode Setting the Speaker Mode Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. 1 Press the EJECT button and then press the MENU button. MOVE 2 Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Press Cursor button to move to ‘Setup’ and then press ENTER button. MOVE EXIT ENTER 1 In Stop mode, press MENU button. 3 4 2 Press Cursor , button to move to ‘DVD VIDEO’ and then press ENTER button. 3 EXIT ENTER In the Speaker Setup, press the ENTER button again. • Set steps 1 ~ 4 again if you want to MOVE 4 RETURN EXIT MOVE SELECT RETURN is pressed, the mode switches alternately as follows: SMALL ➝ NONE. For L and R, the mode is set to SMALL. EXIT When Selecting DVD Play Mode: Note Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. SETUP • ENTER EXIT ENTER • For C, SL, and SR, each time the button switch to DVD AUDIO Play mode. MOVE Press Cursor button to move to ‘Audio’ and then press ENTER button. EXIT ENTER MOVE Press Cursor button to move to ‘DVD TYPE’ and then press ENTER button. ENG MOVE ENTER RETURN EXIT MOVE CHANGE RETURN EXIT • DVD VIDEO : set to play the DVD video • DVD Play mode is set to DVD Audio as factory default setting. • Powering off the main unit will automatically switch to the DVD Audio mode. • contents contained on a DVD audio disc. DVD AUDIO : set to play the default DVD audio. SMALL : Select this when using the speakers. NONE : Select this when no speakers are connected. DivX (R) registration • Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod. 51 MOVE ENTER RETURN EXIT Note • Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 61). 52 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 52 Setting the Delay Time ENG If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 Press Cursor button to move to ‘DELAY TIME’ and then press ENTER button. 4 Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. 5 Press Cursor , to set the Delay time. • You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC. MOVE ENTER EXIT MOVE ENTER EXIT MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT MOVE CHANGE RETURN EXIT SETUP Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers. Note (Dolby Pro Logic II), the delay time may be different for each mode. • With • With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. • The Center channel is only adjustable on 5.1 channel discs. 53 •Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0 inch 13.6 inches 27.2 inches 40.8 inches 4.5 feet 5.6 feet Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms •Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Ds 0 inch 40.8 inches 6.7 feet 10.0 feet 13.4 feet 16.7 feet Ideal CENTER SPEAKER placement Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms Ideal SURROUND SPEAKER placement It is desirable to place all speakers within this circle. Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER 54 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 54 Setting the Test Tone Setting the DRC (Dynamic Range Compression) Use the Test Tone feature to check the speaker connections. 1 In Stop or no disc mode, press MENU button. 2 ENG This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTER button. 1 In Stop or no disc mode, press MENU button. 2 • The test tone will be sent to L ➝ C ➝ Press Cursor button to move to ‘Audio’ and then press ENTER button. R ➝ SR ➝ SL ➝ SW in order. If the ENTER button is pressed again at this time, the test tone will stop. MOVE ENTER EXIT MOVE ENTER EXIT MOVE MOVE ENTER RETURN 3 Press RETURN button to return to the previous level. STOP ENTER MOVE EXIT ENTER EXIT EXIT EXIT 4 Press Cursor , to adjust the ‘DRC’. • When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. Alternative method: press the TEST TONEbutton on the remote. Press TEST TONE button. • Test tone will be produced as follows: • When playing a DVD or CD, this will work only in Stop mode. Use this function to check that each speaker is correctly connected and that there is no problem. To end the test tone, press TEST TONE button again. L: Front Speaker (L) R: Front Speaker (R) C: Center Speaker SL: Rear Speaker (L) SW: Subwoofer SR: Rear Speaker (R) Multi-Channel Pro Logic Mode MOVE ENTER RETURN EXIT CHANGE RETURN EXIT Start Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 55 56 SETUP Press MENU button to exit the setup screen. Press Cursor button to move to ‘DRC’ and then press ENTER button. XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 56 Setting the Audio ENG You can adjust the balance and level for each speaker. Method 1 1 In Stop mode, press MENU button. MOVE 3 When adjusting the audio quality using the setup screen ENTER RETURN EXIT 4 ENTER CHANGE Adjusting Front Speaker Balance 1 Press SOUND EDIT button and then press Cursor , . Adjusting Rear Speaker Balance Adjusting Center Speaker Level Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . 2 3 EXIT Press Cursor , buttons to select and adjust the desired item. Press the , buttons to adjust the settings. MOVE When manually adjusting with the SOUND EDIT button RETURN Adjusting Rear Speaker Level 4 Press SOUND EDIT button and then press Cursor , . Adjusting Subwoofer Speaker Level 5 Press SOUND EDIT button and then press Cursor , . SETUP ENTER MOVE EXIT Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button. MOVE 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. Method 2 EXIT Note Press RETURN button to return to the previous level. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level Press MENU button to exit the setup screen. 57 • The volume level can be adjusted in steps from +6dB to –6dB. • The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. 58 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 58 AV SYNC Setup Sound Field (DSP)/EQ Function Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video. 1 Press the MENU button. 2 DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing Press Cursor , buttons to move to ‘Audio’ and then press ENTER button. 3 ENTER Press DSP/EQ button. • "DSP" appears on the display panel. • Each time the button is pressed, the selection changes as follows: • Setup menu appears. MOVE MOVE EXIT 4 ENTER EXIT Press Cursor , buttons to select the AV-SYNC Delay Time and then press the ENTER button. SETUP Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTER button. • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Note • DSP/EQ function is only available in STEREO mode. Press the PL II mode button to show STEREO on the display. • This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolby Digital discs. MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT • When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and DSP/EQ function does not work. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 59 ENG POP, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK. STUDIO : Provides a sense of presence as if in a studio. CLUB : Simulates the sound of a dance club with a throbbing bass beat. HALL : Provides a clear vocal as if listening in a concert hall. MOVIE: Provides the feeling of a movie theater. CHURCH: Gives the feel of being in a grand church. PASS: Select this for normal listening. 60 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 60 Dolby Pro Logic II Mode You can select the desired Dolby Pro Logic II audio mode. Press PL II MODE button. • Each time the button is pressed, the mode changes as follows. Dolby Pro Logic II Effect This function works only in Dolby Pro Logic MUSIC mode. 1 Press PL II MODE button to select ‘MUSIC’ mode. 2 • MUSIC: When listening to music, you can experience sound effects as if you are listening include the surround speakers for an exciting "wraparound" effect with side wall imaging. to the actual performance. • CINEMA: Adds realism to the movie soundtrack. • PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left and right speakers. • MATRIX: You will hear 5.1 channel surround sound. STEREO: Select this to listen to sound from the front left and right speakers and the subwoofer only. 3 Press PL II EFFECT button to select C-Width, then press Cursor , buttons to select the desired effect setting. • You can select between 0 and 7. • This sets the width of the center image. 4 AUDIO INPUT jacks (L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to surround sound. 61 Note Press PL II EFFECT button to select Dimension, then press the Cursor , buttons to select the desired setting. • You can select between 0 and 6. • Incrementally adjusts the sound field (DSP)from the front or rear. SETUP The higher the setting, the less sound comes from the center speaker. • When selecting Pro Logic II mode, connect your external device to the Press PL II EFFECT button to select Panorama, then press Cursor , buttons to select the desired effect setting. • You can select either 0 or 1. • This mode extends the front stereo image to PRO LOGIC II Note ENG • When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and (Dolby Pro Logic II) button does not work. 62 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 62 Listening to Radio Remote Control Unit Press the TUNER button and select the FM band. 1 Presetting Stations ENG Example: Presetting FM 89.1 in the memory 2 Tune in to the desired station. Automatic Tuning 1 Automatic Tuning 2 Manual Tuning 1 Press the TUNER button and select the FM band. When is pressed, a preset broadcast station is selected. Press and hold TUNING/CH to automatically search for active broadcasting stations. 2 Press TUNING/CH to select "89.10". 3 • Refer to Step 2 on page 63 to Press the TUNER MEMORY button. • “1” flashes in the display. automatically or manually tune in to a station. Briefly press TUNING/CH to increase or decrease the frequency incrementally. Main Unit 1 Press the FUNCTION button to select the FM band. 2 Select a broadcast station. Press the STOP ( ) button to select PRESET and then press button to select the preset station. Automatic Tuning 1 4 Press to select preset number. • You can select between 1 and 5 Press the TUNER MEMORY button again. 6 To preset another station, repeat steps 2 to 5. • Press the TUNER MEMORY button before ‘number’ disappears from the display. 15 presets. • ‘number’ disappears from the display and the station is stored in memory. Press STOP ( ) to select MANUAL and then briefly press to tune in to a lower or higher frequency. RADIO OPERATION the STOP ( ) Automatic Tuning 2 Press button to select "MANUAL" and then press and hold button to automatically search the band. Manual Tuning Press MO/ST button to listen in Mono/Stereo. (This applies only when listening to an FM station.) 63 • Each time the button is pressed, the sound switches between "STEREO" and "MONO". • In a poor reception area, select MONO for a clear, interference-free broadcast. Note • This unit does not receive AM broadcasts. To tune in to a preset station, press remote control to select a channel. on the 64 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 64 Convenient Functions Sleep Timer Function You can set the time that the Home Theater will shut itself off. Press SLEEP button. •" " will be displayed. Each time the button is pressed, the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF. ENG Mute Function This is useful when answering a doorbell or telephone call. Press MUTE button. appears in the display. • • To restore the sound, press the button again. To confirm the sleep timer setting, press SLEEP button. • The remaining time before the Home Theater will shut itself off is displayed. • Pressing the button again changes the sleep time from what you have set earlier. To cancel the sleep timer, press SLEEP button until OFF appears on the display. Using Headphones Use headphones (not supplied) for private listening pleasure. Connect the headphones to the HEADPHONE jack for private listening. Adjusting Display Brightness You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press DIMMER button. DARK ➞ BRIGHT. MISCELLANEOUS • Each time the button is pressed, the brightness changes as follows: Caution • To prevent hearing damage, do not increase the volume excessively when using headphones. 65 66 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 66 Operating a TV with the Remote Control ENG TV Brand Code List When operating a TV with the remote control 1 2 3 4 5 Press TV button to select TV mode. Code No. Brand 1 Admiral (M.Wards) 056, 057, 058 44 MTC 018 2 A Mark 001, 015 45 NEC 018, 019, 020, 040, 059, 060 3 Anam 001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 46 Nikei 003 011, 012, 013, 014 47 Onking 003 Code AOC 001, 018, 040, 148 48 Onwa 003 5 Bell & Howell (M.Wards) 057, 058, 081 49 Panasonic 006, 007, 008, 009, 054, 066, 067, 073, 074 6 Brocsonic 059, 060 50 Penney 018 7 Candle 018 51 Philco 003, 015, 017, 018, 048, 054, 059, 062, 069, 090 8 Cetronic 003 52 Philips 015, 017, 018, 040, 048, 054, 062, 072 9 Citizen 003, 018, 025 53 Pioneer 063, 066, 080, 091 10 Cinema 097 54 Portland 015, 018, 059 11 Classic 003 55 Proton 040 12 Concerto 018 56 Quasar 006, 066, 067 13 Contec 046 57 Radio Shack 017, 048, 056, 060, 061, 075 14 Coronado 015 58 RCA/Proscan 018, 059, 067, 076, 077, 078, 092, 093, 094 15 Craig 003, 005, 061, 082, 083, 084 59 Realistic 003, 019 16 Croslex 062 60 Sampo 040 17 Crown 003 61 Samsung 000, 015, 016, 017, 040, 043, 046, 047, 048, 049, 18 Curtis Mates 059, 061, 063 19 CXC 003 62 Sanyo 019, 061, 065 20 Daewoo 002, 003, 004, 015, 016, 017, 018, 019, 020, 021, 022, 023, 024, 63 Scott 003, 040, 060, 061 025, 026, 028, 029, 030, 032, 034, 035, 036, 048, 059, 090 64 Sears 015, 018, 019 21 Daytron 040 65 Sharp 015, 057, 064 22 Dynasty 003 66 Signature 2000 (M.Wards) 057, 058 23 Emerson 003, 015, 040, 046, 059, 061, 064, 082, 083, 084, 085 67 Sony 050, 051, 052, 053, 055 • If the code matches the TV's code, the TV will be turned off. • If there is more than one code listed for your TV in the table, 24 Fisher 019, 065 68 Soundesign 003, 040 25 Funai 003 69 Spectricon 001 enter one at a time to determine which code works. Example: For a Samsung TV While holding down POWER, use the number buttons to enter 000, 015, 016, 017 and 040. 26 Futuretech 003 70 SSS 018 27 General Electric (GE) 006, 040, 056, 059, 066, 067, 068 71 Sylvania 018, 040, 048, 054, 059, 060, 062 28 Hall Mark 040 72 Symphonic 061, 095, 096 29 Hitachi 015, 018, 050, 059, 069 73 Tatung 006 30 Inkel 045 74 Techwood 018 31 JC Penny 056, 059, 067, 086 75 Teknika 003, 015, 018, 025 Press POWER button to turn on the TV. Point the remote control toward the TV. While holding down POWER, enter the code corresponding to your brand of TV. Point the remote control toward the TV and press POWER. If the TV turns off or on, the setting is complete. Note • The remote control may not work on some brands of TVs. Also, some operations may not be possible depending on your brand of TV. If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default. 059, 060, 098 32 JVC 070 76 TMK 018, 040 33 KTV 059, 061, 087, 088 77 Toshiba 019, 057, 063, 071 34 KEC 003, 015, 040 78 Vidtech 018 35 KMC 015 79 Videch 059, 060, 069 36 LG (Goldstar) 001, 015, 016, 017, 037, 038, 039, 040, 041, 042, 043, 044 80 Wards 015, 017, 018, 040, 048, 054, 060, 064 37 38 Luxman 018 81 Yamaha 018 LXI (Sears) 019, 054, 056, 059, 060, 062, 063, 065, 071 82 York 040 39 Magnavox 015, 017, 018, 048, 054, 059, 060, 062, 072, 089 83 Yupiteru 003 40 Marantz 040, 054 84 Zenith 058, 079 41 Matsui 054 85 Zonda 001 42 MGA 018, 040 86 Dongyang 003, 054 43 Mitsubishi/MGA 018, 040, 059, 060, 075 MISCELLANEOUS buttons (0~9). 67 Brand 4 • You can use the TV POWER, VOLUME, CHANNEL, and Numeric • No. 68 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 68 Before Calling for Service ENG Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. Symptom I cannot eject the disc. Playback does not start. Check/Remedy • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. • Check the region number of the DVD. DVD discs purchased from abroad may not be playable. Sound is not produced. Theater. Make sure that the rating level is correct. • Are you using a deformed disc or a disc with scratches on • the surface? Wipe the disc clean. • No sound is heard during fast playback, slow playback, and step motion playback. • Are the speakers connected properly? Is the speaker setup • Sound can be heard only from a few speakers and not all six. Dolby Digital 5.1 CH Surround Sound is not produced. correctly customized? Is the disc severely damaged? • When listening to a CD or radio, sound is output to the front • • speakers (L/R) only. Select "PRO LOGIC II" by pressing (Dolby Pro Logic II) on the remote control to use all six speakers. Make sure that the DVD disc is 5.1-CH compatible. If you set C, SL, and SR to NONE in the speaker mode in the audio setup of the setup screen, no sound is heard from the center speaker and the front left and right speakers. Set C, SL, and SR to SMALL. • Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 • CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound. Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in the information display? Check/Remedy • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. • Is the remote control being operated within its operation range of and distance? The remote control does not angle • Are the batteries exhausted? work. • Have you selected the mode(TV/DVD) functions of the remote control (TV or DVD) correctly? Audio language and subtitles do not work. • Audio language and subtitles will not work for DVDs not containing Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed. •The main unit is not working. (Example: The power them. And depending on the disc, they may work differently. • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function. • Turn off the power and hold the button on the main unit for longer than 5 seconds. goes out or strange noise is heard.) • The Home Theater is not working normally. Using the RESET function will erase all stored settings. Do not use this unless necessary. • While “NO DISC” message appears on the display of main unit, hold The password for rating level has been forgotten. the main unit's button for longer than 5 seconds. “INITIALIZE” appears on the display and all settings will return to the default values. • Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary. Can't receive radio broadcast. • Is the antenna connected properly? • If the antenna's input signal is weak, install an external FM antenna in an area with good reception. 70 MISCELLANEOUS 69 • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking. • CD-ROMs and DVD-ROMs cannot be played on this Home • Playback does not start immediately when the Play/Pause button is Symptom XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 70 Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Disc Storage Keep in a cool ventilated area Do not keep in direct sunlight Keep in a clean Protection jacket. Store vertically. • Do not allow the discs to become contaminated with dirt. • Do not load cracked or scratched discs. Handling and Storing Discs When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth. • When cleaning, wipe gently from the inside to the outside of the disc. • Condensation may form if warm air comes into contact with cold parts Language Code Language Code Language Code Language 1027 Afar 1181 Frisian 1334 Latvian, Lettish 1506 Slovenian 1028 Abkhazian 1183 Irish 1345 Malagasy 1507 Samoan 1032 Afrikaans 1186 Scots Gaelic 1347 Maori 1508 Shona 1039 Amharic 1194 Galician 1349 Macedonian 1509 Somali 1044 Arabic 1196 Guarani 1350 Malayalam 1511 Albanian 1045 Assamese 1203 Gujarati 1352 Mongolian 1512 Serbian 1051 Aymara 1209 Hausa 1353 Moldavian 1513 Siswati 1052 Azerbaijani 1217 Hindi 1356 Marathi 1514 Sesotho 1053 Bashkir 1226 Croatian 1357 Malay 1515 Sundanese 1057 Byelorussian 1229 Hungarian 1358 Maltese 1516 Swedish 1059 Bulgarian 1233 Armenian 1363 Burmese 1517 Swahili 1060 Bihari 1235 Interlingua 1365 Nauru 1521 Tamil 1069 Bislama 1239 Interlingue 1369 Nepali 1525 Tegulu 1066 Bengali; Bangla 1245 Inupiak 1376 Dutch 1527 Tajik 1067 Tibetan 1248 Indonesian 1379 Norwegian 1528 Thai 1070 Breton 1253 Icelandic 1393 Occitan 1529 Tigrinya 1079 Catalan 1254 Italian 1403 (Afan) Oromo 1531 Turkmen 1093 Corsican 1257 Hebrew 1408 Oriya 1532 Tagalog 1097 Czech 1261 Japanese 1417 Punjabi 1534 Setswana 1103 Welsh 1269 Yiddish 1428 Polish 1535 Tonga 1105 Danish 1283 Javanese 1435 Pashto, Pushto 1538 Turkish 1109 German 1287 Georgian 1436 Portuguese 1539 Tsonga 1130 Bhutani 1297 Kazakh 1463 Quechua 1540 Tatar 1142 Greek 1298 Greenlandic 1481 Rhaeto-Romance 1543 Twi 1144 English 1299 Cambodian 1482 Kirundi 1557 Ukrainian 1145 Esperanto 1300 Kannada 1483 Romanian 1564 Urdu 1149 Spanish 1301 Korean 1489 Russian 1572 Uzbek 1150 Estonian 1305 Kashmiri 1491 Kinyarwanda 1581 Vietnamese 1151 Basque 1307 Kurdish 1495 Sanskrit 1587 Volapuk 1157 Persian 1311 Kirghiz 1498 Sindhi 1613 Wolof 1165 Finnish 1313 Latin 1501 Sangro 1632 Xhosa 1166 Fiji 1326 Lingala 1502 Serbo-Croatian 1665 Yoruba 1171 Faeroese 1327 Laothian 1503 Singhalese 1684 Chinese 1174 French 1332 Lithuanian 1505 Slovak 1697 Zulu inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on. 71 72 MISCELLANEOUS Note ENG Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 43). Code Handling discs Caution Language Code List XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 72 USB Host Feature Supported Products Digital Camera Product Finepix-A340 Finepix-F810 Finepix-F610 Finepix-f450 Finepix S7000 Finepix A310 KD-310Z Finecam SL300R Finecam SL400R Finecam S5R Finecam Xt Dimage-Z1 Dimage Z1 Dimage X21 Coolpix4200 Coolpix4300 Coolpix 2200 Coolpix 3500 Coolpix 3700 Coolpix 4100 Coolpix 5200 Stylus 410 digital 300-digital U300 X-350 C-760 C-5060 X1 U-mini Lumix-FZ20 DMC-FX7GD Lumix LC33 LUMIX DMC-F1 Optio-S40 Optio-S50 Optio 33LF Optio MX Digimax-420 Digimax-400 Sora PDR-T30 Coolpix 5900 Coolpix S1 Coolpix 7600 DMC-FX7 Dimage Xt AZ-1 USB Flash Disk Company Type Fuji Fuji Fuji Fuji Fuji Fuji Konica Kyocera Kyocera Kyocera Kyocera Minolta Minolta Minolta Nikon Nikon Nikon Nikon Nikon Nikon Nikon Olympus Olympus Olympus Olympus Olympus Olympus Olympus Olympus Panasonic Panasonic Panasonic Panasonic Pentax Pentax Pentax Pentax Samsung Samsung Toshiba Nikon Nikon Nikon Panasonic Minolta Olympus Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Digital Camera Product Cruzer Micro Cruzer Mini Cruzer Mini SONY Micro Vault FLEX DRIVE AnyDrive XTICK Micro Mini iFlash LG RiDATA Company Type Sandisk Sandisk Sandisk Sony Serotech A.L tech LG Iomega Imation XTICK(M) EZDrive USB 2.0 USB Flash Drive 128M USB 2.0 128M USB 2.0 256M USB 2.0 64MB USB 2.0 32MB USB 2.0 128MB USB 2.0 128M USB 2.0 128M USB 2.0 64M USB 2.0 64M USB 2.0 64M MP3 Player Product Company Type Creative MuVo NX128M Iriver H320 YH-920 YP-T7 YP-MT6 YP-T6 YP-53 YP-ST5 YP-T5 YP-60 YP-780 YP-35 YP-55 iAUDIO U2 iAUDIO G3 iAudio M3 SI-M500L H10 YP-T5 VB YP-53 Creative Iriver Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Cowon Cowon Cowon Sharp Iriver Samsung Samsung 128 MB MP3 Player 20G HDD MP3 Player 20G HDD MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player MP3 Player HDD MP3 Player 256MB MP3 Player MP3 Player MP3 Player 256MB MP3 Player Multi Card Reader Product UNICORN USB 2.0 Card Reader Company Specifications G E N E R A L T F U N M E V I D E O R O U T P U T A M P L I F I E R Power Consumption Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Usable Sensitivity S/N Ratio Distortion Composite Video Component Video Front speaker output Center speaker output Rear speaker output Subwoofer speaker output Frequency range S/N Ratio Channel separation Input sensitivity Speaker system S P E A K E R Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights ENG 80W 11Ibs 20.5 x 12.6 x 7 inches 41°F ~ 95°F 10% ~ 75% 10dB 60dB 0.5% 1.0Vp-p(75Ω load) Y:1.0Vp-p(75Ω load) Pr:0.70Vp-p(75Ω load) Pb:0.70Vp-p(75Ω load) 80W x 2(3Ω) 80W(3Ω) 80W x 2(3Ω) 100W(3Ω) 20Hz~20KHz 70dB 60dB (AUX)400mV 5.1ch speaker system Subwoofer speaker Front/Center/Rear speaker 3Ω 3Ω 40Hz~200Hz 150Hz~20kHz 85dB/W/M 82dB/W/M 100W 80W 200W 160W Front 3.9 x 19.0 x 3.0 inches Rear 3.9 x 8.1 x 3.1 inches Center 17.4 x 3.9 x 3.0 inches Subwoofer 7.1 x 14.3 x 14.9 inches Front 1.5 Ibs Rear 0.5 Ibs Center o.5 Ibs Subwoofer 3.2 Ibs Type Unicorn USB 2.0 7 IN 1 CARD READER UC-601R Billionton(Taiwan) USB 2.0 Card Reader for SD/MMC/RS-MMC(3-in-1) MISCELLANEOUS USB External HDD Product CUTIE MOMOBAY UX-2 73 Company Type Serotech Dvico POCKET HARD DISK DRIVE USB 2.0 74 XQ100(41~74)_XAC_ENG 2003.3.23 6:49 PM Page 74 Memo Samsung Limited Warranty Samsung Electronics Canada Inc. (SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA authorized service centre. (The name and address of the location nearest you can be obtained by calling toll free 1-800-726-7864 or visiting our web site at www.samsung.ca) Labour one (1) year (carry-in) Parts one (1) year On carry-in models, transportation to and from the service centre is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service centre at the time service is requested. Exclusions This warranty does not cover damage due to accident, fire flood and/or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use, or damage that occurs in shipping. Exterior and interior finish, lamps and glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased and used in Canada.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project