Galaxy 8/18/60/500/512
Galaxy
8/18/60/500/512
Galaxy 512 V1.15
11:42 TUE 11 OCT
A
1
2
3
4
5
6
B
7
8
9
ent
0
#
esc
User Guide
Galaxy 8/18/60/500/512
iii
User Guide
TABLE OF CONTENTS
Introduction ------------------------------------------------------------------- V
Keypad Information ---------------------------------------------------------- 1
Setting the System ---------------------------------------------------------- 3
Before Setting ------------------------------------------------------------ 3
Setting Groups ----------------------------------------------------------- 3
Galaxy 500 and 512 ------------------------------------------------ 3
Sounder -------------------------------------------------------------------- 4
Part Setting ------------------------------------------------------------------- 4
Cancelling Setting ----------------------------------------------------------- 4
Group Name ------------------------------------------------------------------ 4
Unsetting the System ------------------------------------------------------- 5
Normal Entry ------------------------------------------------------------- 5
Straying from the Entry Route -------------------------------------------- 5
Slow Entry --------------------------------------------------------------------- 5
Cancelling Alarms ----------------------------------------------------------- 5
Manager Reset ----------------------------------------------------------- 5
Engineer Reset ----------------------------------------------------------- 5
Menu Options ----------------------------------------------------------------- 6
Accessing the Menu ---------------------------------------------------- 6
Full Menu ------------------------------------------------------------------ 6
Quick Menu --------------------------------------------------------------- 6
Quick Menu Options Table ------------------------------------------------ 7
Omit Zones -------------------------------------------------------------------- 8
Omitting Zones ---------------------------------------------------------- 8
Setting With Omitted Zones ------------------------------------------ 8
Vibration Zones ---------------------------------------------------------- 9
ATM Zones ---------------------------------------------------------------- 9
Forced Set --------------------------------------------------------------------- 9
Selecting Forces Set ---------------------------------------------------- 9
Non-omittable Zones --------------------------------------------------- 9
Chime ------------------------------------------------------------------------ 10
Display Zones -------------------------------------------------------------- 10
Selecting Display Zones --------------------------------------------- 10
Display Log ------------------------------------------------------------------ 11
Print ------------------------------------------------------------------------- 12
Codes -------------------------------------------------------------------- 12
Zones --------------------------------------------------------------------- 12
User Guide
iv
Galaxy 8/18/50/500/512
Log ----------------------------------------------------------------------- 12
All ------------------------------------------------------------------------- 12
Walk Test -------------------------------------------------------------------- 13
All Zones ---------------------------------------------------------------- 13
Selected Zones -------------------------------------------------------- 13
Time and Date -------------------------------------------------------------- 14
Changing Time --------------------------------------------------------- 14
Changing Date --------------------------------------------------------- 14
Advance and Retard -------------------------------------------------- 14
Codes(General) ------------------------------------------------------------ 14
User Codes ----------------------------------------------------------------- 15
Modify PIN --------------------------------------------------------------- 16
Dual Codes ------------------------------------------------------------- 16
Modify Level ------------------------------------------------------------ 17
Duress Code ------------------------------------------------------------ 17
Modify Name ----------------------------------------------------------- 18
Time Zone --------------------------------------------------------------- 18
Temporary Codes ----------------------------------------------------- 19
PIN Change Codes --------------------------------------------------- 19
Modify Groups --------------------------------------------------------- 20
Group Choice ----------------------------------------------------------- 21
MAX Number ----------------------------------------------------------- 21
MAX Function ---------------------------------------------------------- 22
MAX Keypad ------------------------------------------------------------ 22
PIN Warning ---------------------------------------------------------------- 23
MAX User -------------------------------------------------------------------- 23
MAX Number ----------------------------------------------------------- 23
Groups ------------------------------------------------------------------- 24
Summer ---------------------------------------------------------------------- 24
Avoiding False Alarms ---------------------------------------------------- 25
Zone Reference Table ---------------------------------------------------- 26
Alarm Help Messages ---------------------------------------------------- 27
Galaxy 8/18/60/500/512
v
User Guide
INTRODUCTION
Your Galaxy alarm system is, in fact, a computer which has been
designed using the latest software and hardware technology.
First and foremost, the Galaxy meets all your security needs. The
engineer will program and commission the system to your own exacting
requirements.
Galaxy 8/18/60/500/512
1
User Guide
Keypad Information
General
The Galaxy Alarm system is controlled by the Galaxy Mk3 Liquid Crystal Display (LCD)
keypads. There can be a maximum of 16 keypads attached to the Galaxy 8, 18 and 60 and a
maximum of 32 keypads attached to the Galaxy 500 and 512 control panels.
LCD display
Number keys
A
1
2
3
4
5
6
B
7
8
9
ent
Enter key
0
#
esc
Escape key
View keys
Star key
Hash key
Power LED
NUMBER KEYS (0 – 9)
These keys are used to enter the code and to select and modify options.
Before carrying out operations on the system, users must identify themselves with a Personal
Identification Number (PIN). This number is a 4, 5 or 6 digit number selected from keys 0 - 9.
The number keys are also used where groups are programmed on the system permitting
groups (areas) to be set or unset.
VIEW KEYS (A and B)
These keys have been programmed to activate one of the system options. Pressing the A > key
after a valid code has been entered starts the full set routine. Pressing the < B key after a valid
code has been entered starts the part set routine.
Once a system option has been selected, the A > or < B keys can be used to operate as view
keys, stepping forwards (A >) or backwards (< B) through lists of information. Holding down
a view key while viewing an option list, rapidly displays each item in the list, permitting quick
access to the information.
User Guide
2
Galaxy 8/18/60/500/512
ENTER KEY (ent)
User level 3 and above to enter codes, data or selections into the system.
User level 2 to set and unset the system.
User level 1 to set the system.
User level 0 to log PIN entries.
ESCAPE KEY (esc)
The esc key aborts the current option to return to the previous option level. Any option
modification made prior to the option being aborted is erased. Successive pressing of the esc
key returns the user to the start display (known as the BANNER).
The esc key also aborts the setting routine if pressed during the exit time.
HASH KEY (#)
The # key is used to display additional choices for certain options, e.g. ADVANCE/RETARD
the time in the TIME/DATE option.
This key is also used as the user duress key (by pressing twice following a valid code
entry).
STAR KEY (T)
The T key is used to provide additional features for certain options, e.g. printing the event log
or deleting entries.
POWER LED
The green power LED remains lit whenever the keypad is connected to a mains power supply.
A mains power failure is indicated by the LED flashing slowly. The LED flashes rapidly if the
battery voltage falls below the minimum threshold or if one of the fuses on the control panel
PCB blows.
BANNER
The banner is the display shown on the keypad, e.g. Galaxy 500 V1.15 (with the time and
date on the bottom line). This is shown at all times, unless the menu is being accessed or an
alarm or help message is on display. The banner can be changed by the engineer.
USER CODES
The user code is a unique four, five or six digit PIN (Personal Identification Number). The
PIN identifies the user to the Galaxy Alarm panel and allows operation of the system.
Galaxy 8/18/60/500/512
3
User Guide
SETTING THE SYSTEM
BEFORE SETTING
Before setting the system ensure all doors and windows are secured
and areas protected by movement detectors are free from obstruction.
Code + ent
TIMED SET
ENTERING A PIN - USER LEVEL 1-2
120 As each digit is entered the keypad responds with a bleep and
displays a T. When all the digits are entered, press the ent key to
start the setting routine.
Code + A
ENTERING A PIN - USER LEVEL 3 - 6
As each digit is entered the keypad responds with a bleep and
SET
A12345678
Groups UUU----- displays a T. When all the digits are entered press the A > key to
start the setting routine.
1
SETTING GROUPS
SET
A12345678 Where group choice has been assigned to the PIN, select which
Groups SUU----- groups have to set as part of the setting routine. Entry of the PIN
ent
TIMED SET
followed by the A > key, displays the set status of each group on the
keypad screen .
Select which groups have to be to set by entering the number of the
120 group. For example, to set groups 2 and 3 press keys 2 and 3 . The
display changes to indicate the groups selected for setting. Pressing
the ent key starts the setting routine for the specified groups.
Code + A
SET
A12345678
Groups USS----A Key
Galaxy 500 and 512
The Galaxy 500 has 16 groups whilst the 512 has 32 groups. If the
user has group choice, the available groups will be displayed at the
keypad following a valid code + A >. The groups will be displayed
showing A1 to A8. Use both A > and < B keys to scroll to the
various sets of groups.
SET
B12345678
Groups USS----- EXIT TIME
If all the system zones are closed when the setting routine is started,
the display indicates the remaining time, in seconds, to vacate the
premises. Exit the building using the agreed route.
ent
TIMED SET
60
User Guide
4
Galaxy 8/18/60/500/512
SOUNDER
During the setting period the sounder emits a continuous tone if all of
the zones are closed. If a zone is opened during the setting period, the
sounder begins to pulse. The sounder also pulses during the last 25%
of the setting time to indicate time running short.
3 zones open
[<] [>] to view
ZONES OPEN
The exit time will reset should any zones be open or opened during
setting. The display will indicate the number of zones open and invite
viewing. Closing the zones will restart the exit time.
FINAL DOOR/TERMINATOR
The setting procedure can be manually completed by either closing
the FINAL door or by pressing the TERMINATOR button.
SYSTEM SET
When time has expired or a manual termination is made, the system
waits four seconds before setting. The sounders emit two long tones
to confirm that the system is set. The keypad briefly displays the
message SYSTEM SET, before becoming blank.
PIN + B
PART SET
PART SETTING
120 To set part of the system press the < B key after the PIN. Only the
zones which have the PART attribute enabled are set. All other
setting features are the same.
CANCELLING THE SETTING
The setting routine can be aborted by pressing the esc key before the
system sets.
SET
A12345678 GROUP NAME
Groups UUUUUUUU
1
A1 OFFICE AREA U
[<] [>] #=CHANGE
Press T and # keys simultaneously when groups are displayed on the
keypad (when setting for example), will display the name of the
group . The group name should be programmed by the installation
engineer. Press the T and # keys to return to the group display.
Galaxy 8/18/60/500/512
5
User Guide
UNSETTING THE SYSTEM
PIN + ent
Galaxy 500 V1.15
15.49 MON 18 Nov
NORMAL ENTRY
Unsetting starts immediately when the FINAL door is opened or an
ENTRY zone is activated. The sounder pulses slowly and the user
must go directly to the keypad and enter a valid PIN, followed by
A>, <B or ent. Users with group options, will access the UNSET
screen following PIN entry. This permits the user to unset specific
groups. To return to the SET screen press ent.
STRAYING FROM THE ENTRY ROUTE
Go directly to the keypad when entering the building. If the user
strays into a protected area and activates a zone, then a full alarm will
occur. The police may be called out and the system will have to be
reset.
SLOW ENTRY
Enter a valid PIN before the entry time expires. If the entry time
expires before a valid PIN is entered, then a full alarm will occur.
The sounder begins to pulse quickly when 75% of the entry time has
elapsed indicating time is running short.
PIN + ent
4 ALARMS
[<] [>] to View
CANCELLING ALARMS
To cancel an alarm, enter a valid PIN followed by ent at the keypad.
The keypad displays the details of the zone activated. When more
than one zone is activated, their details can be viewed using A> or
<B. Press ent to return to the banner. Certain types of alarms, once
cancelled, require a code with the appropriate reset authorisation to
be entered. The system prompts for a valid reset code by displaying
MANAGER RESET REQUIRED or ENGINEER RESET
REQUIRED on the keypad.
CALL MANAGER
RESET REQUIRED
MANAGER RESET
Entering a manager level PIN followed by ent, resets the system
following an alarm activation.
CALL ENGINEER
RESET REQUIRED
ENGINEER RESET
Certain types of alarm require an engineer to visit the site and, after
investigation, reset the system. In such cases, the system cannot be
reset until the engineer reset has been carried out.
User Guide
6
Galaxy 8/18/60/500/512
MENU OPTIONS
There are two menu structures on the Galaxy control panels:
Full Menu
Only accessed by default by the Manager code on the Galaxy 60, 500
and 512 control panels.
Quick Menu
A selection of options from the full menu. The quick menu is the
default menu access for all user codes (level three and above) as well
as the Manager code on the Galaxy 8 and 18 control panels.
PIN + ent
0 = OMIT ZONES
[ent] to select
ACCESSING THE MENU
To access the menu enter a valid code and press the ent key. The Full
Menu or Quick Menu is accessed, depending on the user level.
OMIT ZONES is the first menu option to be displayed.
NOTE:
1. If the user does not have group choice, all groups
assigned to the user code must be unset.
2. If the user has group choice, at least one group on the
system must be unset.
3. If there are no groups, then the system must be unset.
FULL MENU
The Full Menu has a hierarchy of four structures contained within it.
Each structure is accessible by a increased user code level.
QUICK MENU
The Quick Menu offers users level three and above a selection of up
to 10 options, numbered 0 – 9. The required option is selected by
entering the option number (0 – 9) or by using the A> or <B keys to
display each option.
The menu options (as with all Galaxy lists) are circular, therefore
menu option 9 is followed by menu option 0.
The following Quick Menu options are the factory default settings.
Each option is described in the following pages.
Galaxy 8/18/60/500/512
7
User Guide
QUICK MENU OPTIONS
Menu Option
Quick
Menu No.
Full
Menu No.
User
Level
Omit Zones
0
11
3
Forced Set
1
14
3
Chime
2
21
4
Display Zones
3
21
4
Display Log
4
22
4
Print
5
24
4
Walk Test
6
31
5
Time/Date
7
41
6
Codes
8
42
6
Summer
9
43
6
Timed Set
–
12
3
Part Set
–
13
3
Instant Set
–
16
3
Instant Part
–
17
3
Home Set
–
18
3
All Set
–
19
3
System
–
23
4
Access Doors
–
25
4
Test Outputs
–
32
5
Trace
–
44
6
Timer Control
–
45
6
Group Omit
–
46
6
Remote Access
–
47
6
Engineer Access
–
48
6
Datelock
–
49
6
Table 1. Menu Options
User Guide
8
Galaxy 8/18/60/500/512
OMIT ZONES (User Level 3 and above)
PIN + ent
0 = OMIT ZONES
[ent] to select
NOTE:
ent
1003 INTRUDER
#=OMIT ENT=SET
>A
1004 SECURITY
#=OMIT ENT=SET
#
1004 SECURITY
OMITTED ENT=SET
ent
1 OMITTED
PURPOSE
This option allows the user to omit zones before setting the system.
Zones must be eligible for omission otherwise they will not be
displayed.
120
ent
ZONES OMITTED
14:35 TUE 17 DEC
Zones remain omitted for one set period only.
SELECTING OMIT ZONES
Enter the QUICK MENU. The 0=OMIT ZONES option is displayed.
Press the ent key to select this option.
VIEWING ELIGIBLE ZONES
When the OMIT ZONES option is selected the first zone eligible for
omission is displayed. The eligible zones can be viewed by pressing
the A> or <B keys. The zones eligible for omission can be rapidly
viewed by holding down either of these keys.
OMITTING ZONES
Once the zone to be omitted is shown on the display, press the # key.
The display indicates that the zone is omitted. A> and <B keys can
then be used to select other zones to be omitted using the same
method.
NOTE:
A zone is omitted from the system as soon as the # key is
pressed. The system does not have to be set for this to
come into effect.
SETTING WITH OMITTED ZONES
When the list of omitted zones is complete the setting routine is
started by pressing the ent key. The system starts to set and the
display indicates how many zones have been omitted. Alternatively
the esc key can be used to return to the menu options. Zones that
have been omitted remain omitted even after using the esc key.
NOTE:
All zones omitted are recorded in the log against the user.
GALAXY 512
The Galaxy 512 will allow a single eligible zone to be omitted from
the system. Once a zone has been omitted, it is not possible to view
other zones with the omit attribute enabled, until the omitted zone is
reinstated (either automatically or manually).
Galaxy 8/18/60/500/512
9
User Guide
ATM PIN + ent
[ent] to Select
1=ATM-1
>A
[ent] to Select
2=ATM-2
ent
DELAY ACCESS
ATM-2
12 mins
ACCESS TIMEOUT
ATM-2
10 mins
ATM PIN + ent
1=RESET ACCESS
2=ABORT ACCESS
1
PIN + ent
0 = OMIT ZONES
[ent] to select
1
1 = FORCED SET
[ent] to select
ent
3 OMITTED
120
2 Zones Open
[<] [>] to View
Option not
available
VIBRATION ZONES
If the omitted zone is a vibration zone, then all zones of this type (in
all groups) will be block omitted. The vibration zones remain omitted
until manually reinstated. Unsetting the system does not reinstate
vibration detectors.
ATM 1/2/3/4 ZONES
ATM zones are omitted by entering one of the ten ATM codes (user
188 to user 197). To select this option enter an ATM code followed
by the ent key. Use the A> key to scroll through the four ATM zone
options (ATM1 to ATM4) and select by pressing the ent key. A
predetermined ATM delay time will expire before omitting all ATM
zones with the selected ATM zone type. The zones will be omitted
for the duration of the ATM time-out period and the remaining time
in minutes will be displayed on the initiating keypad. A warning is
given ten and five minutes before the zones are reinstated. The ATM
Time-out period can be extended by entering an ATM code and
selecting 1=Reset Access. To manually reinstate ATM zones, enter
an ATM code and select 2=Abort Access.
FORCED SET (User Level 3 and above)
PURPOSE
The FORCED SET option allows the user to automatically omit
zones, eligible for omission, which are open when the system setting
routine is started. Zones omitted in this way remain omitted for one
set period only. This option is not available on the Galaxy 512.
SELECTING FORCED SET
Access the QUICK MENU. Press key 1 followed by the ent key. The
display indicates how many zones have been omitted and the number
of seconds left before setting.
NON-OMITTABLE ZONES
Some open zones may not be eligible for omission from the system.
In this case the display indicates which zones are open and the exit
time is reset. These zones must be closed before setting can continue.
OPTION NOT AVAILABLE
This option is provided by the engineer, where it is specifically
required. Attempting to select an option when it has not been provided results in the display of OPTION NOT AVAILABLE.
User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
2
2 = CHIME
[ent] to Select
ent
CHIME MODE
0 = OFF
> A
CHIME MODE
1 = ON
ent
10
CHIME (User Level 3 and above)
PURPOSE
The CHIME mode is switched on and off by this option. When the
CHIME mode is on, any zones that have been programmed by the
engineer for chime will activate momentarily when opened.
NOTE:
0 = OMIT ZONES
[ent] to Select
3
3 = DISPLAY ZONES
[ent] to Select
ent
1001 INTRUDER
COMPUTER ROOM
Your system may not require any zones of this type.
SELECTING CHIME
Enter the QUICK MENU. Press key 2 followed by the ent key. The
display shows the ON/OFF status of the CHIME mode. Press the >A
key to toggle between the states and press the ent key to accept the
selection.
NOTE:
Keys 1 AND 0 can also be used to select ON and OFF
respectively.
CHIME IN OPERATION
When switched ON, the CHIME mode remains active until switched
OFF again. Zones that have been programmed with the chime
attribute by the engineer continue to chime when they are activated.
Note:
PIN + ent
Galaxy 8/18/60/500/512
The CHIME mode is suspended while the system is set or
during an alarm.
DISPLAY ZONES (User Level 4 and above)
PURPOSE
This menu option provides the user with a method of checking each
zone for its description and current status.
SELECTING DISPLAY ZONES
Enter the QUICK MENU. Press key 3 followed by the ent key.
Details of the first zone (1001) are displayed.
ADDRESS
The zone address provides a unique four digit address number used
for identification and selection, e.g. 1026 - line 1, RIO 02, zone 6
(Galaxy 500).
FUNCTION
The zone function is displayed and identifies the operation of the
zone, e.g. INTRUDER, FIRE.
Galaxy 8/18/60/500/512
11
User Guide
STATUS
The current status of the zone is displayed as circuit information, e.g.
Open or Closed. This information alternates with function information.
DESCRIPTION
The zone description, if programmed, is displayed on the bottom line
of the display. The descriptor is assembled from alpha-numeric text
and describes the zone in detail, e.g. West Office Door.
1001 INTRUDER
COMPUTER ROOM
2+1
1021 SECURITY
CASHIER DOOR
esc
PIN + ent
0 = OMIT ZONES
[ent] to Select
4
4 = DISPLAY LOG
[ent] to Select
ent
SELECTING AND VIEWING
Selecting the DISPLAY ZONES option displays the first zone,
address 1001. Other zones can be viewed sequentially by using the
>A or <B keys. Zones can also be displayed by entering the address
of the zone: Galaxy 8 enter the zone number (1 digit); Galaxy 18 and
60 enter the RIO and zone number (2 digits); Galaxy 500 and 512
enter the line, RIO and zone number (4 digits). Press the # key to
display the zone resistance and RIO voltage.
ESCAPE
The esc key aborts the option and returns to the option menu.
DISPLAY LOG (User Level 4 and above)
PURPOSE
DISPLAY LOG provides the user with a means of viewing the
system history. Events are recorded in detail and stored in the nonvolatile memory.
SELECTING DISPLAY LOG
Enter the QUICK MENU. Press key 4 followed by the ent key.
Details of the most recent event to be logged are displayed.
LOG
A12345678 EVENTS
Groups NN-----1 + 2
The events available for display include details of setting, unsetting
and alarms. Each event is timed and date stamped.
SELECTING A DATE
LOG
A12345678
Groups YY------ Hold down one of the view keys, the dates held in the log are rapidly
ent
stepped through. The A> key moves forward through the dates and
the <B moves backwards. Stopping at the required date reveals the
first event for that date.
User Guide
08:53 TUE 22 NOV
AC FAIL-RIO108
<B (hold)
MON 21 NOV 1999
MON 20 NOV 1999
release <B
16:31 SUN 20 NOV
FULL SET USR 98
#
12
Galaxy 8/18/60/500/512
VIEWING EACH EVENT
The entire events of any one date can be viewed by progressively
stepping through the events using the A> and <B view keys.
ADDITIONAL INFORMATION
The # key can be used to reveal additional information on some types
of events. This information is displayed on the bottom line. The
information includes details such as zone descriptors, user levels and
which keypad was used.
PRINTING
If a serial printer is connected to the system, a system history can be
printed by pressing the T key. The system will print from the event
on display until the most recent event.
16:31 SUN 20 NOV
KOO L6 A1------esc
PIN + ent
0 = OMIT ZONES
[ent] to Select
5
5 = PRINT
[ent] to Select
ent
1=CODES
3=LOG
2=ZONES
4=ALL
1
PRINTING CODES
ESC to abort
2
PRINTING ZONES
ESC to abort
3
PRINTING LOG
ESC to abort
4
PRINTING ALL
ESC to abort
PRINT (User Level 4 and above)
PURPOSE
The PRINT option gives the user the opportunity to get a hard copy
print-out of the system details. This option requires a serial printer to
be connected to the system.
SELECTING PRINT
Enter the QUICK MENU. Press key 5 followed by the ent key. The
system print options are displayed. Pressing the esc key aborts the
PRINT option.
CODES
Press key 1 to start the print-out of all the codes, giving the user
number, name, level and length of code.
ZONES
Select the ZONES option to print-out the details of each zone in the
system. The zone address, function, and descriptor is printed. Press
key 2 to select this option.
LOG
The entire LOG can be printed out by selecting key 3. The print-out
consists of up to 1000 events depending on panel type, and details
the time and date of setting, unsetting and alarms.
ALL
All the options (CODES , ZONES, and LOG) can be printed out by
selecting the ALL option. Pressing key 4 delivers a print-out starting
with user codes.
Galaxy 8/18/60/500/512
Printer off-line
Escape to abort
13
User Guide
HELP MESSAGE
If a print-out is started without a printer being connected and on-line,
the display indicates that the printer is off-line.
WALK TEST (User Level 5 and above)
PIN + ent
0 = OMIT ZONES
[ent] to Select
6
6 = Walk Test
ent to select
ent
1=TEST ALL ZONES
2=SELECTED ZONES
1
WALK TEST ACTIVE
ESC to abort
NO ENTRIES
2
1001 FINAL
#=TEST ENT=START
>A
1002 EXIT
#=TEST ENT=START
#
1002 EXIT
TEST ENT=START
ent
PURPOSE
The WALK TEST option provides a method of testing the zones to
ensure that they are operating correctly. There are two options
available:
1. All zones can be tested
2. Selected zones can be tested
In both cases the sounder indicates an open zone. The test is recorded
in the log.
SELECTING WALK TEST
Enter the QUICK MENU. Press the key 6 followed by the ent key.
Once the WALK TEST is selected, TEST ALL ZONES or SELECTED ZONES are displayed.
ALL ZONES
Choosing ALL ZONES (press key 1) starts the test immediately. No
selection is necessary as all valid zones are included in the test. The
sounder operates whenever a zone is opened and stops when all
zones are closed.
NOTE:
The TEST ALL ZONES option only tests zones
which can be omitted from the system.
SELECTED ZONES
Choosing the SELECTED ZONES option by pressing key 2 displays
the first zone on the system (zone 1001). Each zone is displayed in
turn by using the >A or <B keys. When the zone to be included in the
test is displayed, press the # key. Other zones can be included in the
test in the same manner. When all of the required zones have been
selected, press the ent key to start the WALK TEST.
NOTE:
The SELECTED ZONES option will includes
non-omittable zones.
ENDING WALK TEST
To abort the walk test option press the esc key, otherwise the walk
test option remains active for 20 minutes after the last key press.
User Guide
14
PIN + ent
0 = OMIT ZONES
[ent] to Select
7
7 = TIME/DATE
[ent] to Select
ent
Galaxy 8/18/60/500/512
TIME/DATE (User Level 6)
PURPOSE
The TIME/DATE option allows the user to modify both the time
(hours/minutes) and the date (day/month/year).
SELECTING TIME/DATE
Enter the QUICK MENU. Press key 7 followed by the ent key.
Once the TIME/DATE option has been selected, the time or date can
be selected by pressing the A> or <B key.
15:25 14/12/1999
A=TIME B=DATE
CHANGING TIME
To change the time press the A> key. The display prompts for a
NEW TIME in hours and minutes (HH:MM). When the new time is
entered, the display immediately returns to the time or date selection
screen. The system does not accept invalid times (greater than 23
HH:MM
hours, greater than 59 minutes). Pressing the esc key aborts the entry.
>7
NEW TIME
--:-enter time
CHANGING DATE
DD/MM/YY To change the date press the < B The display prompts for a NEW
DATE in days, months and years (DD/MM/YY). When the new date
is entered, the display momentarily shows the day of the week, before
returning to the time or date selection screen. The system does not
accept invalid dates (e.g. 14/12/99). Pressing the esc key aborts the
entry.
NEW DATE
--/--/-enter date
15:25 14/12/1999
A=TIME B=Date
ADVANCE AND RETARD
It is possible to advance and retard the time to compensate for any
#
variations in clock speed. Press the # key when in the time/date mode
Adjustment/week
to select the clock speed adjustment. The range is 0 to 120 seconds
Ö010 (0-120) secs per week. Pressing the T key will retard the time.
(press the Ö key to
retard time)
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
CODES (User Level 6)
PURPOSE
The CODES menu option enables the managers, (user level 6), to
allocate PINs and related information to users. The codes option is
divided into three sub–menus:
1.USER CODES
Sub divided into nine menus (depending on panel used and
whether the group and MAX Mode options are enabled) that
determine all of the access information for users with Personal
Identification Numbers (PINs). This menu also assigns MAX
details to user numbers.
Galaxy 8/18/60/500/512
>A
CODES
2 = PIN Warning
>A
User Guide
2. PIN WARNING
Available only on the Galaxy 500 and 512. This option determines the warning period given to users prior to programmed Pin
Change date.
NOTE:
CODES
3 = MAX Users
15
The valid period for Pin Change codes is programmed by
the installation engineer.
3. MAX USERS
This option is only available if the MAX mode is enabled. The
option is subdivided into two menus that assign the MAX card to
users who do not have a PIN assigned.
MANAGER CODE
The manager code is authorised to:
• Program the User Code options for each of the user codes.
• Allocate other codes to user level 6.
• Modify the manager PIN (the manager PIN cannot be deleted)
• Assign the MAX features to the code.
The manager code defaults to group choice when groups are enabled.
The manager is able to toggle the group choice option on and off
(using the T key) as required.
GALAXY 8 & 18
The manager code defaults to accessing the quick menu.
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
001 USER
L3
ð
SELECTING CODES
Enter the QUICK MENU. Press key 8 followed by the ent key.
USER CODES
When the CODES option has been selected, press key 1 to access
User Codes. Display each of the user numbers using key A>. Each
user number offers options for PIN, level, name and where applicable
time zones and groups. When the user number to be modified is
displayed, press the ent key to access the Modify PIN option.
User Guide
16
ent
[ent] to Select
1 = Modify PIN
ent
001 PIN
>
5678
ent
001 PIN
>
Indicates
Dual Code
001 USER
L3
#5678
zz
Galaxy 8/18/60/500/512
MODIFY PIN
The Modify PIN option allows a pin to be assigned to a user or an
existing PIN to be modified. The PIN must be a four, five or six digit
number that is unique to the system. If a duplicate PIN is assigned,
the message INVALID SELECTION is displayed. As each digit is
entered it appears on the bottom line of the display. Pressing the T
key erases the last digit displayed. Continued pressing of the T key
will erase all of the digits. When the correct PIN has been assigned
press the ent key to accept the programming and return to the
previous menu level.
When a PIN has been assigned to a user number, a solid box (n) is
displayed on the line of the user number details screen.
• DELETING A PIN
Existing PIN entries can be completely erased using the T key
instead of a digit entry. When there is no PIN assigned to a user
number a hollow square (o) is displayed in the top line of the
users details screen.
• ASSIGNING DUAL CODES
To program a user code as a Dual Code press the # key while the
Modify PIN option is selected. The # displays at the start of the
assigned user PIN e.g. #5678. When a PIN has been assigned as a
dual code two solid boxes (nn) are displayed in the top line of
the users details screen.
• DUAL CODES OPERATION
Entry of a single dual code cannot gain access to the menu, set or
unset the system. The message NO ACCESS – ADDITIONAL
CODE is displayed. A second dual code must be entered within
60 seconds to access the menu, set or unset the system. Dual
codes can be different levels, the highest level entered is granted
access to the system, whether it is entered first or second.
• GALAXY 60, 500,and 512
A single entry of a dual code, without a second dual code entry
within 60 seconds, is recorded in the event log as an Illegal
Code. All outputs programmed as Illegal Code are activated.
Galaxy 8/18/60/500/512
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
17
MODIFY LEVEL
Each user is assigned an access level which determines the menu
options available to the user (see p.7, Table 1. Menu Options). On
selecting this option, enter the level to be assigned to the user and
press the ent key to accept the programming and return to the
previous menu level. See Table 2. User Access Levels, for access
availability.
L evel
ent
CODES
1 = User Codes
ent
001 USER
L3
ð
ent
[ent] to Select
1 = Modify PIN
>A
[ent] to Select
2 = Modify Level
001 Level
>_3
ent
Access Availab ility
0†
Guard
Entered into the event memory - no other option
1†
Cleaner
Can only set the system
2†
Caretaker
Can only set and unset the system
3
Users
Menu Options 11 - 19
4
Users
Menu Options 11 - 29
5
Users
Menu Options 11 - 39
6‡
Manager
Menu Options 11 - 49
†
‡
ent
User Guide
No access to menu functions.
The manager code has a fixed level which cannot be changed.
Table 2. User Access Levels
• DURESS CODE
1.Galaxy 18, 60, 500 and 512
If the # key is pressed while the Modify Level option is
accessed, then the current code is assigned as a Duress Code.
Entry of a duress code at any time activates any output programmed as Duress. There is no limit to the number of codes that
can be assigned as Duress Codes.
2.Galaxy 8, 18, 60, 500 and 512
Any valid PIN followed by # # ent (the ent key can be replaced
by either the A> or <B key) can be used as a Duress Code. This
method will activate any output programmed as PA.
User Guide
18
PIN + ent
•
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
ent
[ent] to Select
3 = Modify PIN
3
[ent] to Select
3 = Modify Name
>A
ent
001 NAME USER_
EFG HIJKLMNØö0 P
ent
[ent] to Select
4 = Time Zone
ent
[ent] to Select
0 = OFF
Use the A key
to step through
the four time
zone options.
QUICK MENU
All user codes default to the quick menu. This menu is made up
of a selection of ten options (0 – 9) from the menu options 11 –
68. The user code level controls access to the quick menu. Any
user can be upgraded from the quick menu to the full menu by
assigning a T to the user while the Modify Level option is
accessed. Therefore a user with a level T5 would have access to
the full menu from options 11 – 39. No code can access both
menus.
NOTE:
Galaxy
ð
001 USER
L3
ent
Galaxy 8/18/60/500/512
The manager code defaults to the quick menu on the
Galaxy 8 and 18, but defaults to the full menu on the
60, 500 and 512.
MODIFY NAME
This allows a name to be assigned to the user (maximum six characters). Each of the user codes default to the name USER and the
manager defaults to MGR. The manager name cannot be changed.
On selecting the Modify Name option, a section of the alphanumeric that can be assigned to the user name is displayed on the
bottom line of the keypad; the cursor flashes on the letter L. Press T
to erase the letters of the default or previous name. When the previous name has been erased, use the A> or <B keys to move the cursor
to the first letter of the name and press the ent key. The selected
character appears on the top line, continue this process until the name
is completed. The # key toggles between upper and lower case
characters and the system library.
TIME ZONE (Galaxy 60, 500 & 512)
Managers can allocate time zones to user PINs when TIMERS have
been programmed by the engineer. Time zones are used to disable the
user PIN during the times (ON to OFF) programmed in TIMER A
and B.
When 4 = Time Zone displays press the ent key . Using the A> key
select the time zones option to be allocated to the PIN. The following
time zones options are available:
0=OFF
1=TIMER A
2=TIMER B
3=TIMER A+B
The times assigned to Timer A and Timer B can be viewed using
option 45 Timer Control. If a code that has been assigned to
Galaxy 8/18/60/500/512
19
User Guide
1=Timer A, 2=Timer B or 3= Timer A+B is entered out with the
assigned times, an Illegal Code event is recorded in the log and any
outputs programmed as Illegal Code are activated.
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
ð
001 USER
L3
ent
[ent] to Select
1 = Modify PIN
5
[ent] to Select
5 = Temp Code
ent
Temp Code
00 (0-99) days
2+5
Temp Code
25 (0-99) days
Ú
ent
Temp Code
(0-99) days
PIN Change Code
ent
TEMPORARY CODES (Galaxy 500 & 512)
Temporary Codes allow a PIN to be temporarily allocated to a user.
On selecting this option, enter the number of days (0 – 99) that the
code is to remain active. The default setting of 0 indicates that the
code is permanent. A temporary code expires and is removed from
the codes list at midnight after the assigned number of days. A code
that has been assigned as a Temporary Code is indicated on the user
code display by a ^ between the user number and the user name, e.g.
001^ USER.
The manager code cannot be assigned as a Temporary Code.
PIN CHANGE (Galaxy 500 & 512)
If a user is assigned the PIN Change feature in the Temporary Code
option, the user must assign a new PIN after a predetermined period
of time otherwise the PIN expires and is no longer operational. A
notification (1 – 28 days) that the pin requires to be changed can be
assigned using the PIN Warning option. This prompts the user to
assign a new code whenever the expiring code is entered during the
PIN Warning period (except during system unsetting). The new PIN
must be six digits and must be different from any current PIN. The
new PIN must be re-entered and, if confirmed, the user is returned to
the banner. If the esc key is pressed or the new PIN entered is invalid,
the user may continue to use the panel as normal. The next PIN entry
will prompt the PIN change.
NOTE:
If the user has not entered a new PIN by the end of the
PIN Warning period, then the PIN is erased on the next
unsetting of the system.
To program a user code as a PIN Change code, select the
Temporary Codes option and press the T key instead of
NOTE: A number of days for a temporary code; press the
ent key to accept the programming and return to the
previous menu level. A code assigned as a PIN Change
code is indicated on the user code display by a T between
the user number and the user name, e.g. 001 T USER.
User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
ð
001 USER
L3
A ________
ent
[ent] to Select
1 = Modify PIN
6
[ent] to Select
6 = Modify Groups
20
MODIFY GROUPS (Galaxy 18, 60, 500 and 512)
This option determines the system groups that the user has access to
and operational control over. The Modify Groups option is only
available when the Group Mode has been enabled by the engineer.
The system defaults to groups disabled.
On selecting the Modify Groups option, groups currently allocated
to the user are displayed. All users default to group 1. Pressing the
group number toggles the group assigned to the user. Pressing 2 and
3 assigns groups 2 and 3 to the user. Pressing 1 (while group 1 is
already assigned) removes group 1 from the user code. To assign
group choice to the user, press the T key. When the required groups
have been assigned to the user, press the ent key to accept the
programming and return to the previous menu level.
• GALAXY 500 and 512
The Galaxy 500 has 16 groups and the 512 has 32 groups. The
groups are displayed on the keypad in blocks of eight groups
which are labelled A, B, C and D:
Use A> or <B keys to move between the group blocks. Press
keys 1 – 8 to assign the groups in each block to the user.
ent
Groups A 1_______
>A 1_______
>A
Groups B 1_______
>B 1_______
1+2+3
Groups B 1_______
>B _23_____
Ö
Groups B 1_______
>B Ú23_____
ent
Galaxy 8/18/60/500/512
†
Group Block
Physical Group
A1-8†
1-8
B1-8†
9-16
C1-8
17-24
D1-8
25-32
Groups available on the Galaxy 500.
Galaxy 8/18/60/500/512
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
001 USER
L3
A ________
ent
[ent] to Select
1 = Modify PIN
7
[ent] to Select
7 = MAX No
ent
MAX No
>0000000000
Enter new
MAX number
ent
21
User Guide
• SINGLE GROUPS
A user can be assigned to any single group. In this case a user can
only access, set and unset the single group.
• MULTIPLE GROUPS
Users can be allocated to more than one group in which case
access and operation are collective. The user cannot choose to
operate on a single or combination of the assigned groups.
• GROUP CHOICE
Users can be allocated to more than one group, but also have the
choice of which of the allocated groups to view, set or unset.
Pressing T key while assigning groups to the user assigns the
group choice feature.
NOTES: 1.The manager has fixed access to all system
groups. This cannot be reprogrammed.
2.The manager is assigned group choice by
default, but the feature can be removed.
3.Users authorised to access the Codes option
can only assign groups that have been assigned to their
user code. A user who does not have access to group 4,
cannot assign group 4 to another user code.
MAX NUMBER
Each MAX card has a unique 10 digit number laser etched onto it. A
MAX card is assigned to a user by entering this number in the MAX
Number option. The number identifies the MAX card to the system
and references it to the user it has been assigned to.
Each MAX Number defaults to 0000000000 (ten zero’s):
1. Press and hold the B key until the zeros are deleted.
2. Enter the unique 10 digit number which is laser etched onto the
MAX card.
3. Press the ent key to save the programming and return to the
previous menu.
NOTE: A MAX number can be assigned to a user code that does
not have a PIN allocated to it. All other options for this
user are valid for the MAX card. It is recommended that
MAX numbers should be assigned to users not requiring
a PIN at the MAX USERS menu option.
User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
22
Galaxy 8/18/60/500/512
MAX FUNCTION
The MAX card can be assigned to a single menu option. The user
must be authorised to access the menu option, either by the user level
assigned or by having the menu option access level changed by the
engineer.
The default option is Not Used. A new option is assigned by
pressing the A> or <B key until the required option is displayed.
MAX KEYPAD
The menu option assigned to the MAX card can be limited to operate
on a single keypad. On selecting this option the display shows TT,
ent
indicating that a keypad has not been specified. To specify a keypad,
press the # key. The address of the first keypad on the system is
001 USER
L3
A ________ displayed. Use the A> or <B key to select the required keypad and
press the ent key to accept the programming.
ent
CODES
1 = User Codes
[ent] to Select
1 = Modify PIN
9
8
[ent] to Select
8 = MAX Function
ent
MAX Function
ÚÚ = NOT USED
1+2
MAX Function
9 = TIMED SET
ent
[ent] to Select
9 = MAX Keypad
ent
- KEYPAD
# = Enable
ÚÚ
NOTE:
A black flashing square over the first digit of the keypad
address indicates the address of the keypad currently
being used.
• “CARD- HELD” MAX OPERATION
The MAX function is activated when the card is held directly in
front of a MAX reader for three seconds. The MAX reader must
be assigned a common group to the MAX user. The keypad
specified in the MAX KEYPAD option displays the assigned
MAX function.
NOTE: If the specified keypad is in use, then the option does not
display. If the MAX function is an “action” type option,
e.g. 12 = Full Set, then the function is carried out.
If no keypad is specified (TT), the MAX menu option will operate
on all keypads that share the groups of the MAX user. The message
Press any key is displayed on all valid keypads. Press any key to
activate the function on that keypad. Press no key within five seconds
and the function automatically activates on all keypads.
Galaxy 8/18/60/500/512
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
>A
CODES
2 = PIN Warning
ent
PIN Warning
99 (1-99) days
CODES
3 = MAX Users
3
ent
201 USER ‚
A 1------ent
MAX Users
1 = Max No
ent
Max No 0000000000
Ent Number
ent
23
User Guide
PIN WARNING
This option determines the number of days notification before the
expiry date of any user codes programmed as PIN Change. During
the notification period, the user is prompted to enter a new code on
entry of the expiring PIN. The default period is 99 days, with a
programmable range of 1 – 99. If a user does not assign a new code
by the end of the PIN Warning period, then the code is erased on the
next unsetting of the system.
NOTE:
The PIN Warning ends on the last day of the month, the
PIN expires on the first day of the following month.
MAX USERS
This option is used to assign additional MAX users to the system
without allocating PINs, MAX users are only authorised to operate
the Access Control functions of the MAX modules.
Enter the Codes option and select 3 = MAX Users. Press the ent
key to display the first MAX user number (User 201). Each of the
users can be displayed using the A> and <B keys, or a specific user
can be selected by entering the required user number. When the
required code is displayed, press the ent key; to display 1 = MAX
Number.
MAX NUMBERS
The MAX number assigned to the MAX user identifies the card to
the system and references it to the MAX user.
Each MAX Number defaults to 0000000000 (ten zero’s):
1. Press and hold the B key until the zeros are deleted;
2. Enter the unique 10 digit number laser etched onto the MAX
card;
3. Press the ent key to save the programming and return to the
previous menu.
When a MAX number has been assigned to a MAX user number, a
solid box (n) is displayed on the top line of the MAX user number
details screen.
User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
3
CODES
3 = MAX Users
ent
201 USER ‚
A 1------ent
MAX Users
1 = Max No
>A
Max Users
2 = Groups
ent
Groups A 1_______
>A 1_______
>A
Groups B 1_______
>B 1_______
2+3
Groups B 1_______
>B 123_____
ent
24
Galaxy 8/18/60/500/512
GROUPS
This option assigns group access to the MAX user. The MAX user
must be assigned a group that is common to the MAX moduleto
permit the access control functions to operate. If the MAX user does
not have access to the group assigned to the module, the access
control functions are denied. The Modify Groups option is only
available when groups have been enabled by the engineer. The
system defaults to groups disabled.
On selecting the Modify Groups option, the groups currently allocated to the user are displayed. All users default to group 1. Pressing
the group number toggles the group assigned to the user. Pressing 2
and 3 assigns groups 2 and 3 to the user. Pressing 1 (while group 1 is
already assigned) removes group 1 from the MAX user; press the ent
key to accept the programming and return to the previous menu level.
• GALAXY 500, 504 and 512
The Galaxy 500 has 16 groups, and the 504 and 512 have 32
groups. These are displayed on the keypad in blocks of eight
groups, labelled A, B, C and D. Use the A> or <B keys to move
between the group blocks. Press keys 1 – 8 to assign the groups in
each block to the user.
SUMMER (User Level 6)
On the first day of each year, the British Summer Time (BST) Start
date is set to the last Sunday in March and the End date is set to the
fourth Sunday in October.
The operation of the Summer option is as follows: At 01: 00 hours
on the Start date, the system clock advances to 02 : 00 hours; at 01 :
00 hours on the End date, the system clock goes back to 00 : 00
hours (midnight).
The Start and End dates can be reprogrammed by authorised user
codes. Press the A> key to modify the Start date or the <B key to
select the End date; the new date must be a valid four digit number
— in the day month format (dd/mm).
• GALAXY 512
The Summer option can only be modified by the engineer.
Galaxy 8/18/60/500/512
25
User Guide
AVOIDING FALSE ALARMS
False alarms are inconvenient and may be costly. Police can withhold response from consistent
offenders.
Here are nine points to help avoid false alarms.
1. Be sure you fully understand how to operate the alarm system. In your absence someone
thoroughly instructed, should be available to operate the system.
2. Before leaving the premises ensure that all doors and windows are securely closed.
3. Where passive infra red or movement detectors are installed make sure the areas are kept
free from all animals or birds. Particular attention should be paid to swinging signs,
fluorescent lights, Christmas decorations, electric fans, heating or ventilating systems.
These should be switched off if possible
4. Always follow the exit/entry route procedure agreed with your alarm installer.
5. Treat the alarm components with care to ensure they are not damaged.
6. Consult your alarm installer about changes to your building and its contents if you think
they may affect the alarm system or its performance.
7. Always report alarm activation to your alarm installer. If necessary, an engineer will be sent
to check the system.
8. If opening or closing times are monitored by a central station be sure you notify them of
any variations from the agreed times or password.
9. The system should be fitted with a stand-by battery (not included) which will operate the
system for a limited period in the event of a mains failure. Please ensure that the mains is
restored as quickly as possible so that the stand-by battery can be recharged.
User Guide
26
Galaxy 8/18/60/500/512
Zone Reference Tables
Zone
Galaxy
18 & 6 0
Galaxy
60 only
Function
Description
Chime
Omit
Part
Function
Description
Chime
Omit
Part
Function
Description
Chime
Omit
Part
1001
1002
1003
1004
1011
1012
1013
1014
1015
1016
1017
1018
RIO------------------------
Zone
1
2
3
4
5
6
7
8
RIO------------------------
Zone
1
2
3
4
5
6
7
8
Galaxy 8/18/60/500/512
27
User Guide
ALARM AND HELP MESSAGES
OTHER KEYPAD
IN USE
ALARM IN
PROGRESS
PA
RESET REQUIRED
CALL MANAGER
RESET REQUIRED
CALL MANAGER
RESET REQUIRED
OTHER KEYPAD IN USE (GALAXY 8 and 18 only)
This message advises the user that the system is already in use. The Galaxy 8
and 18 allow only one user at a time.
ALARM IN PROGRESS
The system is currently in alarm condition and must be cancelled by a valid
PIN or keyswitch operation.
PA RESET REQUIRED
After a PA (Personal Attack) zone has been activated the system has to be
reset by a high level code (such as a manager or engineer depending on the
reset level setting).
MANAGER RESET REQUIRED
Following alarm activation the system requires to be reset by a manager
level code.
ENGINEER RESET REQUIRED
Where the system has been programmed for engineer reset, following an
activation the alarm engineer must be called to reset the system before the
user can set the alarm.
Tamper alarms usually require an engineer to visit the site to check all
modules on the system. This message is displayed when a tamper alarm
occurs.
NO ENTRIES
INVALID
OPTION
Invalid code
NO ENTRIES
This message appears if a user attempts to view or inspect the log and there
is nothing in the log to be viewed or when the omit option is selected and
there are no omittable zones on the system.
INVALID SELECTION
The option selected or value entered is illegal or out of range.
INVALID CODE
The code entered is not a valid code registered in the system memory.
Option not
available
CALL ALARM CO.
QUOTE CODE XXXXX
OPTION NOT AVAILABLE
The option selected is not operational.
TECHNISTORE RESET
Call the Alarm Monitoring Station and quote the five digit number
displayed. Enter the number quoted by the monitoring station to
reset the system.
User Guide
28
Galaxy 8/18/60/500/512
INSTALLER DETAILS
Name: ----------------------------------------------------------------------------------Address: --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Telephone: -----------------------------------------------------------------------------Office Hours: --------------------------------------------------------------------------Other Times: ---------------------------------------------------------------------------Account No.: ---------------------------------------------------------------------------
Galaxy 8/18/60/500/512
29
User Guide
User Guide
30
Galaxy 8/18/60/500/512
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement