Samsung LE19R7 LCD TV Owner's Instructions
Samsung LE19R71W is a versatile device combining TV, PC and multimedia playback capabilities. With a stylish design, it can complement any interior. The device impresses with its modern features, among which you will find a built-in TV tuner, Teletext decoder, and speakers. With a range of connectivity options, you can connect various devices like DVD/Blu-ray players, game consoles, and computers.
Advertisement
Advertisement
BN68-01074A-00Cover.qxd 8/21/04 5:39 AM Page 1
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
UKRAINE
Customer Care Center
☎
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/min)
01805 - 121213 (€ 0,12/min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-502-0000
Web Site
www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de
www.samsung.com/hu www.samsung.com/it www.samsung.lu
www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ur
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
LCD TV
LE19R7
Owner’s Instructions
BN68-01074A-00
ON-SCREEN MENUS
PC DISPLAY
TELETEXT
Register your product at www.samsung.com/global/register
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 1
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 1
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts .............................................................. 2
Viewing the Control Panel ........................................ 3
Viewing the Connection Panel.................................. 4
Viewing the Remote Control .................................... 5
Installing Batteries in the Remote Control ................ 6
Switching On and Off................................................ 6
Placing Your Television in Standby Mode ................ 6
Plug & Play .............................................................. 6
SETTING THE CHANNELS
Storing Channels Automatically................................ 7
Storing Channels Manually ...................................... 8
Editing the Channels ................................................ 9
Sorting the Stored Channels .................................... 9
Assigning Channels Names .................................... 10
Fine Tuning Channel Reception .............................. 10
SETTING THE TIME
Setting and Displaying the Current Time..............15
Setting the Sleep Timer ........................................16
Switching the Television
On and Off Automatically......................................17
SETTING THE OTHERS
Choosing Your Language ....................................17
Setting the Blue Screen Mode..............................18
Selecting the Source ............................................18
Editing the Input Source Names ..........................19
USING THE TELETEXT FEATURE
Teletext Decoder ..................................................19
Displaying the Teletext Information ......................20
Selecting a Specific Teletext Page ......................20
Using Fastext to Select a Teletext Page ..............21
Storing Teletext Pages..........................................21
SETTING THE PICTURE
Changing the Picture Standard ................................ 11
Adjusting the Custom Picture .................................. 11
Changing the Colour Tone........................................ 12
Changing the Picture Size ........................................ 12
Adjusting the Colour Control .................................... 13
Freezing the Picture ................................................ 13
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) ......................................22
Display Modes ......................................................22
Setting the PC ......................................................23
SETTING THE SOUND
Changing the Sound Standard ............................14
Customizing the Sound ........................................14
Selecting the Sound mode ..................................14
Adjusting the Volume Automatically ....................15
RECOMMENDATIONS FOR USE
How to Adjust the Stand ......................................24
How to Adjust the Angle of the TV ......................24
Installing the Wall Mount Kit ................................24
Installing VESA compliant mounting devices ......24
Using the Decoration Covers ..............................24
Troubleshooting:
Before Contacting Service Personnel ..................25
Technical and Environmental Specifications ......25
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
Symbol
Press Important Note One-Touch
Button
English-1
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 2
List of Features
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control
& Batteries (AAA x 2)
Power Cord Wall Mount kit Owner’s Instructions
Registration Card
Decoration Cover Cleaning Cloth
English-2
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 3
Viewing the Control Panel
SOURCE
Toggles between all the available input sources
(TV, Ext., AV, S-Video, PC, DVI).
In the on-screen menu, use this button as you use the
ENTER
button on the remote control.
MENU
Press to see an on-screen menu of your TV’s features.
Press to increase or decrease the volume.
In the on-screen menu, use the buttons as you use the and buttons on the remote control.
Press to change channels. In the on-screen menu, use the buttons as you use the and buttons on the remote control. (Without the Remote Control,
You can turn on TV by using the Channel buttons.)
Speaker
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
English-3
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 4
Viewing the Connection Panel
The product colour and shape may vary depending on the model.
Power Input
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
Connecting DVI
- Connect the DVI connector to the DVD connector.
- Connect the stereo audio cable to “R - AUDIO - L” on the rear of your set and the other end to “Audio Out” of the sound card on your DVD.
- DVI does not support PC function.
Connecting Computer
- Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the
Video Card of your computer.
- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
English-4
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 5
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting External A/V Devices
- Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
Viewing the Remote Control
Television Standby button
Number buttons for direct channel access
One/Two-digit channel selection
: Volume increase
: Volume decrease
Temporary sound switch-off
Menu display and change confirmation
Control the cursor in the menu
Sound mode selection
Picture effect selection
Sound effect selection
Use to see information on the current broadcast
Available source selection
Previous channel
P : Next channel
P : Previous channel
Exit the on screen menu
Picture freeze
Picture size selection
Automatic Power-off
Selects the TV mode directly
Teletext Functions
Teletext hold
Teletext index
Teletext sub page
Teletext size selection
Teletext display/mix both teletext information and the normal broadcast
Teletext reveal
Teletext mode selection(LIST/FLOF)
P : Teletext next page
P : Teletext previous page
Teletext cancel
Teletext store
Exit from the teletext display
Fastext topic selection
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the Power, Channel and Volume buttons.
English-5
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 6
Installing Batteries in the Remote Control
1.
Lift the cover at the back of the remote control upward as shown in the figure.
2.
Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3.
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1.
Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2.
Press the button on the front of the set.
You also can press the
POWER
button or the
TV
( ) button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the panel.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4.
To switch your set off, press the
POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the
POWER
button on the remote control.
The screen is turned off and a standby indicator appears on the front of your set.
2.
To switch your set back on, simply press the
POWER
, numeric buttons
(0~9)
or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Plug & Play
When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.
1.
Press the
POWER
button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
Press the
ENTER
button.
2.
Select the appropriate language by pressing the or button.
Press the
ENTER
button to confirm your choice.
3.
The message “Check antenna input.” is displayed with “OK” selected.
Press the
ENTER
button.
Please check that the antenna or cable TV is connected correctly.
English-6
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 7
4.
Select the appropriate country by pressing the or button.
Press the
ENTER
button to confirm your choice.
5.
The “Auto Store” menu is displayed with the “Start” selected.
Press the
ENTER
button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the
ENTER
button at any time to interrupt the memorization process.
6.
Press the
ENTER
button.
Select the “Hour” or “Minute” by pressing the or button.
Set the “Hour” or “Minute” by pressing the or button.
You can also set the hour and minute by pressing the number buttons on the remote control.
7.
Press the
ENTER
button to confirm your setting.
The message “Enjoy your viewing.” is displayed.
Language:
Select your language.
Country:
Select your country.
Auto Store:
Automatically scans for and stores channels available in the local area.
Clock Set:
Sets the current time for the TV clock.
If you want to reset this feature...
1.
Press the
MENU
button to display the menu.
Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the
ENTER
button to select “Plug & Play”.
3.
This message “Start Plug & Play” is displayed.
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
However, you can sort numbers manually and clear any channels you do not wish to watch.
1.
Press the
MENU
button to display the menu.
Press the or button to select “Channel”, then press the
ENTER
button.
2.
Press the
ENTER
button to select “Country”.
3.
Select the appropriate country by pressing the or button.
Press the
ENTER
button to confirm your choice.
4.
Press the or button to select “Auto Store”, then press the
ENTER
button.
5.
Press the
ENTER
button to select “Start”.
The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the “Channel” menu.
6.
After all the available channels are stored, the “Sort” menu appears.
English-7
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 8
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1.
Press the
MENU
button to display the menu.
Press the or button to select “Channel”, then press the
ENTER
button.
2.
Press the or button to select “Manual Store”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “Programme”.
4.
To assign a programme number to a channel, find the correct number by pressing the or button and then press the
ENTER
button.
You can also set a channel number by pressing number buttons on the remote control.
5.
Press the or button to select “Colour System”, then press the
ENTER
button.
6.
Select the colour standard required by pressing the or button, then press the
ENTER
button.
7.
Press the or button to select “Sound System”, then press the
ENTER
button.
8.
Select the sound standard required by pressing the or button, then press the
ENTER
button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the or button to select “Channel”. Press the
ENTER
button.
Select
C
(Air channel) or
S
(Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing the or button and then press the
ENTER
button.
Channel mode:
P
(Programme mode)
C
(Air channel mode)
S
(Cable channel mode)
You can also set a channel number by pressing the number buttons on the remote control.
10.
If you do not know the channel numbers, press the or button to select “Search”. Press the
ENTER
button.
Search by pressing the or button and then press the
ENTER
button.
11.
Press the or button to select “Store”, then press the
ENTER
button. Press the or button to select “OK”, then press the
ENTER
button.
12.
Repeat steps 3 to 11 for each channel to be stored.
Programme:
Selects a program number for the channel.
Colour System:
Sets the colour supporting system.
Sound System:
Sets the sound supporting system.
Channel:
Selects a channel.
Search:
Scans for the frequency value for the channel.
Store:
Saves your settings.
English-8
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 9
Editing the Channels
You can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed during scanning.
1.
Use the number buttons to directly select the channel that will be added or deleted.
2.
Press the
MENU
button to display the menu.
Press the or button to select “Channel”, then press the
ENTER
button.
3.
Press the or button to select “Add/Delete”, then press the
ENTER
button.
4.
Press the or button to select channels to be deleted or added.
5.
Press the button to select “ ” column, then press the
ENTER
button.
The channels marked with “ ” will be added.
6.
Press the
EXIT
button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote control.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.
1.
Press the
MENU
button to display the menu. Press the or button to select “Channel”, then press the
ENTER
button.
2.
Press the or button to select “Sort”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “From”. Press the or button until the channel number that you wish to change is displayed.
Press the
ENTER
button.
4.
Press the or button to select “To”, then press the
ENTER
button.
Press the or button until the new number by which you wish to identify the channel is displayed.
Press the
ENTER
button.
5.
Press the or button to select “Store”, then press the
ENTER
button.
Press the or button to select “OK”, then press the
ENTER
button.
The selected channel is exchanged with the one previously stored to the chosen number.
6.
Repeat steps
3
to
5
for another channel to be sorted.
7.
Press the
EXIT
button to exit.
English-9
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 10
Assigning Channels Names
Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.
1.
Press the
MENU
button to display the menu. Press the or button to select “Channel”, then press the
ENTER
button.
2.
Press the or button to select “Name”, then press the
ENTER
button.
3.
If necessary, select the channel to be assigned to a new name by pressing the or button. Press the
ENTER
button.
4.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the or button
Press the button
Press the button
Press the
ENTER
button
The characters available are : Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( -, space)
5.
Repeat steps
3
to
4
for each channel to be assigned to a new name.
6.
Press the
EXIT
button to exit.
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal reception.
1.
Use the number buttons to directly select the channel that you want to fine tune.
2.
Press the
MENU
button to display the menu.
Press the or button to select “Channel”, then press the
ENTER
button.
3.
Press the or button to select “Fine Tune”, then press the
ENTER
button.
4.
Press the or button to adjust the fine tuning.
Press the
ENTER
button.
5.
Press the
EXIT
button to exit.
Fine tuned channels that have been saved are marked with an asterisk “
*
” on the right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the or button and then press the
ENTER
button.
English-10
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 11
Changing the Picture Standard
You can also press the
P.MODE
button on the remote control to select one of the picture settings.
You can select the type of picture which best corresponds to your viewing requirements.
1.
Press the
MENU
button to display the menu. Press the or button to select “Picture”, then press the
ENTER
button.
2.
Press the
ENTER
button to select “Mode”.
3.
Press the or button to select the desired picture effect.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Dynamic:
Selects the picture for high-definition in a bright room.
Standard:
Selects the picture for optimum display in a normal environment.
Movie:
Selects the picture for comfortable display in a dark room.
Custom:
Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
[PC mode]
•
Entertain:
High brightness. (For watching motion pictures such as a DVD or Video CD.)
•
Internet:
Medium brightness. (For working with a mixture of images such as text and graphics.)
•
Text:
Normal brightness. (For documentations or works involving heavy text.)
•
Custom:
Select to view your favorite display settings.
The Picture mode must be adjusted separately for each input source.
In the PC mode, “Entertain”, “Internet”, “Text”, “Custom” appears.
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1.
Press the
MENU
button to display the menu. Press the or button to select “Picture”, then press the
ENTER
button.
2.
Press the or button to select “Custom”, then press the
ENTER
button.
3.
Press the or button to select a particular item.
Press the
ENTER
button.
4.
Press the or button to decrease or increase the value of a particular item. Press the
ENTER
button.
5.
Press the
EXIT
button to exit.
Contrast:
Adjusts the lightness and darkness between objects and the background.
Brightness:
Adjusts the brightness of the whole screen.
Sharpness:
Adjusts the outline of objects to either sharpen them or make them more dull.
Colour:
Adjusts the colours, making them lighter or darker.
If you make any changes to these settings, the picture mode is automatically switched to “Custom”.
In the PC mode, only “Contrast” and “Brightness” can be adjusted.
English-11
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 12
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1.
Press the
MENU
button to display the menu. Press the or button to select “Picture”, then press the
ENTER
button.
2.
Press the or button to select “Colour Tone”, then press the
ENTER
button.
3.
Press the or button to select the desired colour tone setting.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Cool 2:
Makes the colour temperature bluer than “Cool 1” menu.
Cool 1:
Makes whites bluish.
Normal:
Keeps whites white.
Warm1:
Makes whites reddish.
Warm2
: Makes the colour temperature redder than “Warm1” menu.
In the PC mode, “Cool” ,“Normal”, “Warn”, “Custom” appears.
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1.
Press the
MENU
button to display the menu. Press the or button to select “Picture”, then press the
ENTER
button.
2.
Press the or button to select “Size”, then press the
ENTER
button.
3.
Select the required option by pressing the or button.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
You can select these options by simply pressing the
P.SIZE
button on the remote control.
Auto Wide:
Automatically adjusts the picture size to the "Wide" aspect ratio.
Wide:
Adjusts the picture size to Wide appropriate for DVDs or wide broadcasting.
Zoom:
Magnifies the Wide picture (in the vertical direction) to fit the screen size.
4:3
: This is the default setting for a video movie or normal broadcasting.
In the PC and DVI mode, only “Wide” and “4:3” mode can be adjusted.
(The “Zoom”, “Auto Wide” mode is not supported.)
Zoom:
Select by pressing the or buttons.
Use the or button to move the picture up and down.
After selecting , use the or button to magnify or reduce the picture size in the vertical direction.
English-12
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 13
Adjusting the Colour Control
Adjust the individual R, G, B Colour Controls.
1.
Press the
MENU
button to display the menu.
Press the or button to select “Picture”, then press the
ENTER
button.
2.
Press the or button to select “Colour Control ”, then press the
ENTER
button.
3.
Press the or button to select a particular item.
Press the
ENTER
button.
4.
Press the or button to decrease or increase the value of a particular item. Press the
ENTER
button.
5.
Press the
EXIT
button to exit.
Available in PC Mode Only.
Freezing the Picture
1.
Press the
STILL
button to freeze a moving picture.
Normal sound will still be heard. Press it again to cancel.
This function doesn’t work when the input Source is DVI, ane PC.
English-13
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 14
Changing the Sound Standard
You can also select these options by simply pressing the
S.MODE
button on the remote control.
Customizing the Sound
You can select the type of the special sound effect to be used when watching a given broadcast.
1.
Press the
MENU
button to display the menu. Press the or button to select “Sound”, then press the
ENTER
button.
2.
Press the
ENTER
button to select “Mode”.
3.
Press the or button to select the desired sound effect.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Standard:
Selects the normal sound mode.
Music:
Emphasizes music over voices.
Movie:
Provides live and full sound for movies.
Speech:
Emphasizes voices over other sounds.
Custom:
Selects your custom sound settings.
The sound settings can be adjusted to suit your personal preferences.
(Alternatively, you can use one of the “automatic” settings.)
1.
Press the
MENU
button to display the menu. Press the or button to select “Sound”, then press the
ENTER
button.
2.
Press the or button to select “Custom”, then press the
ENTER
button.
3.
Press the or button to select a particular item.
Press the
ENTER
button.
4.
Press the or button to decrease or increase the value of a particular item. Press the
ENTER
button.
5.
Press the
EXIT
button to exit.
If you make any changes to the “automatic” settings, the sound mode is automatically switched to the “Custom” mode.
Selecting the Sound mode
You can also set these options simply by pressing the
DUAL I-II
button on remote control.
You can set the sound mode by pressing the “DUAL I-II” button.
When you press it, the current sound mode is displayed on the screen.
FM
Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
DUAL 1/2
MONO
STEREO MONO
DUAL1 DUAL 2
MONO
MONO STEREO
MONO DUAL1
DUAL 2
Default
Automatic change
DUAL 1
Automatic change
DUAL 1
English-14
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 15
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
1.
Press the
MENU
button to display the menu. Press the or button to select “Sound”, then press the
ENTER
button.
2.
Press the or button to select “Auto Volume”, then press the
ENTER
button.
3.
Press the or button to select “On” or “Off”.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.
1.
Press the
MENU
button to display the menu. Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “Time”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “Clock Set”.
4.
To...
Move to “Hour” or “Minute”
Set the “Hour” or “Minute”
Press the
ENTER
button.
Press the...
or button.
or button.
5.
Press the
EXIT
button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-15
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 16
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.
1.
Press the
MENU
button to display the menu. Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “Time”, then press the
ENTER
button.
3.
Press the or button to select “Sleep Timer”, then press the
ENTER
button.
4.
Press the or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the
ENTER
button.
The TV automatically switches to standby mode when the timer reaches 0.
5.
Press the
EXIT
button to exit.
Press the
SLEEP
button on the remote control repeatedly until the appropriate time interval appears.
English-16
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 17
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at the time you select.
Switch off automatically at the time you select.
1.
Press the
MENU
button to display the menu. Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “Time”, then press the
ENTER
button.
3.
Press the or button to select “On Timer”, then press the
ENTER
button.
4.
Press the or button to adjust “Hour”, then press the button to move to the next step. Set other items using the same method as above.
When finished, press the
ENTER
button to return.
5.
Press the or button to select “Off Timer”, then press the
ENTER
button.
6.
Press the or button to adjust “Hour”, then press the button to move to the next step. Set other items using the same method as above.
When finished, press the
ENTER
button to return.
7.
Press the
EXIT
button to exit.
The first step is to set the television’s clock.
(refer to “Setting and Displaying the Current Time” on page 15)
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "On" in order for the timers to work.
Choosing Your Language
When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.
1.
Press the
MENU
button to display the on-screen menu.
Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “Language”, then press the
ENTER
button.
3.
Select a particular language by pressing the or button repeatedly.
Press the
ENTER
button.
You can choose one of 15 languages.
4.
Press the
EXIT
button to exit.
English-17
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 18
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".
1.
Press the
MENU
button to display the menu. Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “Blue Screen” then press the
ENTER
button.
3.
Press the or button to select “On” or “Off”.
Press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1.
Press the
MENU
button to display the menu.
Press the
ENTER
button to select “Input”.
2.
Press the
ENTER
button to select “Source List”.
3.
Select the required device by pressing the or button.
Press the
ENTER
button.
You can only select a source if it is connected to your TV.
Press the
SOURCE
button on the remote control to toggel between all the available source. TV mode can be selected by pressing the
TV
or
P
/ button on the remote control but you cannot select it by pressing the
SOURCE
button.
English-18
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 19
Editing the Input Source Names
Name the device connected to the input jacks to make your input source selection easier.
1.
Press the
MENU
button to display the menu.
Press the
ENTER
button, to select “Input”.
2.
Press the or button to select “Edit Name”, then press the
ENTER
button.
3.
Press the or button to select the device that you wish to edit.
Press the
ENTER
button.
4.
Press the or button to select the required device.
Press the
ENTER
button.
The following options are available:
- - - - - VCR - DVD - Cable STB - HD STB - Satellite STB - AV Receiver -
DVD Receiver - Game - Camcorder - DVD Combo - DHR - PC
DHR: DVD HDD Recorder
5.
Press the
EXIT
button to exit.
Teletext Decoder
Most set channels carry “teletext ”, pages of written information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
D
E
F
Part
A
B
C
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
English-19
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 20
Displaying the Teletext Information
You can display teletext information at any time, but signal reception must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1.
Using the
P
( ) or
P
( ) button, select the channel providing the teletext service.
2.
Press the
TTX/MIX
( ) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time by pressing the
MENU
( ) button.
3.
Press the
TTX/MIX
( ) button again.
The actual broadcast will be displayed simultaneously with the teletext page on the screen.
4.
Press the
TV
( ) button again to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the
Text language is identical with the language in the “Setup” menu mode. If both languages are different, select the same language with the Text language on the “Setup” menu.
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page number directly:
1.
Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons.
2.
If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the ( ). Press the ( ) button again to resume.
3.
Using the various display options:
To display...
Both teletext information and the normal broadcast
Hidden text (answers to quiz games, for example)
The normal screen
A secondary page, by entering its 4-digit number
The next page
The previous page
Double-size letters in the:
Upper half of the screen
Lower half of the screen
Normal screen
Press the...
TTX/MIX (
INFO (
INFO (
)
)
DUAL I-II (
P (
P (
)
)
( )
Once
Twice
Three times
)
)
English-20
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 21
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control.
1.
Display the teletext contents page by pressing the
TTX/MIX
( ) button.
2.
Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line).
3.
Press the Red button to display the previous page.
Press the Green button to display the next page.
4.
Press the
TV
( ) button again to exit from the Text display.
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1.
Select the LIST mode using the
SOURCE
(
The
SOURCE
(
) button.
) button is used to switch between the LIST and FLOF modes.
2.
Press the coloured button corresponding to the page that will be replaced.
3.
Enter the new page number using the numeric buttons.
4.
Repeat steps
2
and
3
for each page to be stored, using a different coloured button each time.
5.
Press the
SLEEP
( ) button until the corresponding blocks blink.
English-21
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 22
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card.
Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.
First, click on “Control Panel” on the Windows start menu.
2.
When the control panel window appears, click on “Appearance and Themes” and a display dialog-box will appear.
3.
When the control panel window appears, click on “Display” and a display dialog-box will appear.
4.
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution):
Optimum - 1440 X 900
If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
(All resolutions between the supported limits are supported)
Mode Resolution
IBM
VESA
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1440 x 900
Horizontal
Frequency (kHz)
31.469
31.469
37.861
37.500
37.879
48.077
48.363
56.476
60.023
63.981
79.976
70.635
Vertical
Frequency (Hz)
70.087
59.940
72.809
75.000
60.317
72.188
60.004
70.069
75.029
60.020
75.025
74.984
Pixel Clock
Frequency (MHz)
28.322
25.175
31.500
31.500
40.000
50.000
65.000
75.000
78.750
108.00
135.00
136.75
Sync Polarity
(H/V)
- / +
- / -
- / -
- / -
+ / +
+ / +
- / -
- / -
+ / +
+ / +
+ / +
- / +
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI does not support PC function.
English-22
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 23
Setting the PC
Image Lock:
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
1.
Preset: Press the
SOURCE
button to select PC mode.
2.
Press the
MENU
button to display the menu.
Press the or button to select “Setup”, then press the
ENTER
button.
3.
Press the or button to select “PC”, then press the
ENTER
button.
4.
Press the
ENTER
button to select “Image Lock”.
5.
Press the or button to select “Coarse” or “Fine”, then press the
ENTER
button.
6.
Press the or button to adjust the screen quality.
Press the
ENTER
button.
7.
Press the
EXIT
button to exit.
Position:
Adjust the PC’s screen positioning if it does not fit the TV screen.
1.
Press the
MENU
button to display the menu.
Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “PC”, then press the
ENTER
button.
3.
Press the or button to select “Position”, then press the
ENTER
button.
4.
Press the or button to adjust the V-Position (Vertical-Position).
Press the or button to adjust the H-Position (Horizontal-Position).
Press the
ENTER
button.
5.
Press the
EXIT
button to exit.
Image Reset:
You can replace all image settings with the factory default values.
1.
Press the
MENU
button to display the menu.
Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “PC”, then press the
ENTER
button.
3.
Press the or button to select “Image Reset”, then press the
ENTER
button.
4.
Press the
EXIT
button to exit.
Auto Adjustment:
Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal. The fine, coarse and position values are adjusted automatically.
1.
Press the
MENU
button to display the menu.
Press the or button to select “Setup”, then press the
ENTER
button.
2.
Press the or button to select “PC”, then press the
ENTER
button.
3.
Press the or button to select “Auto Adjustment”, then press the
ENTER
button.
4.
Press the
EXIT
button to exit.
English-23
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 24
How to Adjust the Stand
(1)
(2)
How to Adjust the Angle of the TV
Button
1.
Place the front of the TV onto a soft cloth or cushion on a table as in Figure (1).
- Align the TV bottom along the table edge.
2.
Press on the center of the TV back.
Adjust the stand as in Figure (2) while pressing the button on the back of the stand.
3.
Place the TV on the table so that the TV sits safely.
(1) Angle adjustment when using the
TV on its stand.
(2) Angle adjustment when converting from
Stand to Wall mount (1 3, 3 1)
(3) Angle adjustment when LCD TV is wall-mounted
When you adjust the stand, press the button on the back of the stand.
1.
Figure (1) shows the adjustment angle (-2°~14°) when you use the LCD on its stand.
Excessive tilting can turn the LCD TV over which may cause damage.
2.
Figure (2) shows the adjustment angle (14°~80°) when you convert the LCD from stand-based use to wall-mount.
3.
Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.
You will hear a “Click” sound when changing the angle from 1 to 2 or 3 to 2.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information on installing the
Wall Mount, see the instruction in the Wall Mount items. Contact a technician for installing the wall bracket. Samsung
Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Installing VESA compliant mounting devices
Button
Mounting pad
(sold separately)
1.
Place the TV down on a soft cloth or cushion on a table.
2.
Adjust the stand, pressing the button on the back of the stand.
3.
Align the mounting interface pad (not supplied) with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases (not supplied).
(2) (3)
Using the Decoration Covers
(1)
(2)
1.
When installing the TV on the wall without using the stand, insert decoration covers into the holes as described in the picture (1).
2.
After inserting the decoration covers, fasten them with 4 screws as described in the picture (2).
English-24
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 25
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture, distorted sound
Remote control malfunctions
“Check signal cable.” message is displayed.
On PC mode, “Mode Not Supported.” message is displayed.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on the front fo the set.
Check the picture contrast and brightness settings.
Check the volume.
Check the volume.
Check whether the
MUTE
button has been pressed on the remote control.
Adjust the colour settings.
Check that the broadcast system selected is correct.
Try to identify the electrical appliance that is affecting the set and move it further away.
Plug your set into a different mains socket.
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,888,000) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Technical and Environmental Specifications
Model Name
Screen Size (Diagonal)
Power Supply
Power Consumption
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LE19R7
19 inches
AC 220-240 V, 50 Hz
45W
1440 x 900 @ 60Hz
3W x 2
485 x 58 x 369 mm
485 x 200 x 408 mm
5.6 kg
10 °C to 40 °C (50 °F to 104 °F)
10% to 80%, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5% to 95%, non-condensing
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
English-25
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 26
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.).
If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.
• Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.
• This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.
• To cut off the power source, unplug this apparatus from the wall outlet.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.
• Locate this apparatus near an easily accessible AC outlet.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Unplug this apparatus from the AC outlet before any service.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 27
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
UNITED KINGDOM
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics (U.K.) Ltd.,
Unit C, Customer Care Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 0870) 242 0303, Fax: 01952) 297617
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.
BN68-01074A-00Eng.qxd 8/21/04 5:15 AM Page 28
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
Advertisement
Key features
- 19 inch LCD screen with a resolution of 1366 x 768
- Built-in TV tuner for receiving digital and analog TV channels
- Teletext decoder for accessing teletext information
- HDMI input for connecting high-definition devices
- USB input for connecting USB storage devices
- PC input for connecting a computer
- Stylish design with a slim profile and narrow bezel
- Wall mountable for space-saving installation